immortalwrt/target/linux/at91/Makefile

# SPDX-License-Identifier: GPL-2.0-only
#
# Copyright (C) 2006-2013 OpenWrt.org

include $(TOPDIR)/rules.mk

ARCH:=arm
BOARD:=at91
BOARDNAME:=Microchip (Atmel AT91)
FEATURES:=ext4 squashfs targz usbgadget ubifs
SUBTARGETS:=sama7 sama5 sam9x

KERNEL_PATCHVER:=5.15

include $(INCLUDE_DIR)/target.mk

KERNELNAME:=zImage dtbs

DEFAULT_PACKAGES += kmod-usb-ohci kmod-at91-udc kmod-usb-gadget-eth

$(eval $(call BuildTarget))
target: use SPDX license identifiers on Makefiles Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> 2021-02-10 21:52:34 +08:00			`# SPDX-License-Identifier: GPL-2.0-only`
at91: move to 4.4 kernel Signed-off-by: Ben Whitten <ben.whitten@gmail.com> SVN-Revision: 48353 2016-01-19 18:15:32 +08:00			`#`
at91: upgrade to kernel 3.8.7 and use devicetree This upgrades the AT91 target to 3.8.7, and migrates to device tree. This allows a single kernel to be built for most at91 variants which simplifies things quite a bit. The immediate result is that all subtargets are nuked, and any boards without dts files are no longer supported, though the target now includes more boards than before. The adc driver was also nuked as 3.8.7 includes a new one under the IIO subsystem. Signed-off-by: Adam Porter <porter.adam@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36452 2013-04-27 00:55:40 +08:00			`# Copyright (C) 2006-2013 OpenWrt.org`
target: use SPDX license identifiers on Makefiles Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> 2021-02-10 21:52:34 +08:00
Added initial support for at91 plaform (HCG) SVN-Revision: 6508 2007-03-05 01:29:44 +08:00			`include $(TOPDIR)/rules.mk`

			`ARCH:=arm`
			`BOARD:=at91`
at91: Renaming subtarget sama5d3 to sama5 Renaming at91 subtarget sama5d3 to sama5 and using at91-sama5d3_xplained as a target device in sama5 subtarget.This will enable to add other sama5d2 & sama5d4 target devices in sama5 subtraget.This will avoid code duplication when sama5d2 & sama5d4 added as different subtarget. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com> 2017-09-14 02:51:13 +08:00			`BOARDNAME:=Microchip (Atmel AT91)`
at91: Automatically detect USB feature The sama7 sub target does not have USB support, the feature should not be activated there. OpenWrt can automatically detect if the target supports USB by using the scripts/target-metadata.pl script. With the automatic detection USB support will only get activated on subtargest which actually support USB like sam9x and sama5. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 2022-04-07 06:36:25 +08:00			`FEATURES:=ext4 squashfs targz usbgadget ubifs`
at91: add kernel support for sama7g5 soc Add kernel support for SAMA7G5 by back-porting mainline kernel patches. Among SAMA7G5 features could be remembered: - ARM Cortex-A7 - double data rate multi-port dynamic RAM controller supporting DDR2, DDR3, DDR3L, LPDDR2, LPDDR3 up to 533MHz - peripherals for audio, video processing - 1 gigabit + 1 megabit Ethernet controllers - 6 CAN controllers - trust zone support - DVFS for CPU - criptography IPs Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> 2022-02-04 21:57:50 +08:00			`SUBTARGETS:=sama7 sama5 sam9x`
Added initial support for at91 plaform (HCG) SVN-Revision: 6508 2007-03-05 01:29:44 +08:00
at91: switch to Kernel 5.15 by default Getting ready for the next release. Claudiu said: > I tested v5.15 on all targets I have access to previously, when > updating OpenWrt kernel for v5.15 and when preparing this PR. (#11918) Signed-off-by: Paul Spooren <mail@aparcar.org> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> 2023-02-23 02:40:20 +08:00			`KERNEL_PATCHVER:=5.15`
fill in the kernel version info for every target, move the kernel tarball md5sums to a central place SVN-Revision: 7748 2007-06-28 13:52:00 +08:00
major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets SVN-Revision: 8694 2007-09-09 03:55:42 +08:00			`include $(INCLUDE_DIR)/target.mk`

at91: convert boards to generic build target Evaluation boards are left in component form to ease flashing using vendor tooling and instructions. These boards also do not include the EOF marker in the UBIFS as the bootloaders are recent and easily upgradeable. The end product boards use factory.bin images based on the dts layout and include EOF markers as bootloader UBI support is not determined. Signed-off-by: Ben Whitten <ben.whitten@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me> 2017-05-04 05:15:20 +08:00			`KERNELNAME:=zImage dtbs`

kernel: clean up usb gadget support clean up usb gadget support: - rename gadget modules so that they appear together and are easier to identify as gadget modules - make usb-lib-composite and usb-gadget hidden as there is no point in selecting those without gadget drivers that require them as deps Signed-off-by: Tim Harvey <tharvey@gateworks.com> 2016-09-08 23:40:03 +08:00			`DEFAULT_PACKAGES += kmod-usb-ohci kmod-at91-udc kmod-usb-gadget-eth`
major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets SVN-Revision: 8694 2007-09-09 03:55:42 +08:00
			`$(eval $(call BuildTarget))`