immortalwrt/target/linux/layerscape/armv8_64b/target.mk

# SPDX-License-Identifier: GPL-2.0-only
#
# Copyright (C) 2016 Jiang Yutang <jiangyutang1978@gmail.com>

ARCH:=aarch64
BOARDNAME:=ARMv8 64-bit based boards
KERNELNAME:=Image dtbs
DEPENDS:=+@KERNEL_BTRFS_FS +@KERNEL_BTRFS_FS_POSIX_ACL

define Target/Description
	Build firmware images for NXP Layerscape ARMv8 64-bit based boards.
endef
target: use SPDX license identifiers on Makefiles Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> 2021-02-10 21:52:34 +08:00			`# SPDX-License-Identifier: GPL-2.0-only`
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com> 2016-10-29 00:14:32 +08:00			`#`
			`# Copyright (C) 2016 Jiang Yutang <jiangyutang1978@gmail.com>`

			`ARCH:=aarch64`
layerscape: rename subtargets and update makefile files Rename subtargets 32b/64b with armv8_32b/armv8_64b which are more proper, and update makefile files. There also will be other subtargets added in the future, like armv7. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> 2017-06-29 11:19:07 +08:00			`BOARDNAME:=ARMv8 64-bit based boards`
layerscape: make uImage with zImage for 32-bit kernel uImage should be made with zImage. This patch is to support making uImage with zImage. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> 2017-09-04 13:42:49 +08:00			`KERNELNAME:=Image dtbs`
config: kernel: Add support for configuring BTRFS to be built-in Add the KERNEL_BTRFS_FS config option so that targets can select whether BTRFS support must be built-in. Select this option (alongside KERNEL_BTRFS_FS_POSIX_ACL) from the layerscape/armv8_64b subtarget instead of enabling it in target/linux/layerscape/armv8_64b/config-* files. Move disabling of CONFIG_BTRFS_FS_CHECK_INTEGRITY into generic configs. This makes it possible for OpenWRT to be built with built-in BTRFS support on specific boards, instead of whole targets. Signed-off-by: Marek Behún <kabel@kernel.org> Link: https://github.com/openwrt/openwrt/pull/15990 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 2024-07-22 22:57:50 +08:00			`DEPENDS:=+@KERNEL_BTRFS_FS +@KERNEL_BTRFS_FS_POSIX_ACL`
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com> 2016-10-29 00:14:32 +08:00
			`define Target/Description`
layerscape: rename subtargets and update makefile files Rename subtargets 32b/64b with armv8_32b/armv8_64b which are more proper, and update makefile files. There also will be other subtargets added in the future, like armv7. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> 2017-06-29 11:19:07 +08:00			`Build firmware images for NXP Layerscape ARMv8 64-bit based boards.`
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com> 2016-10-29 00:14:32 +08:00			`endef`