fish/immortalwrt
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
33e2115fe4
immortalwrt/target/linux/lantiq/xrx200/target.mk

23 lines
447 B
Makefile
Raw Normal View History

lantiq: add a subtarget for the xrx200 SoC family Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38029
2013-09-18 05:46:00 +08:00
ARCH:=mips
SUBTARGET:=xrx200
BOARDNAME:=XRX200
lantiq: fix build of squashfs images This patch fixes build of squashfs image on lantiq. Currently the FEATURE variable is overwritten by the subtarget. Fixes: FS#3480 Fixes: f1c652337628 ("lantiq: clean up target/subtarget features") Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl> [reformat Fixes:] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-29 05:57:06 +08:00
FEATURES+=atm nand ramdisk
lantiq: switch from 34k to 24k GCC treats 24kc and 34kc exactly the same and will generate identical code, so there is no need to tune to 34kc instead of 24kc. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-22 01:23:11 +08:00
CPU_TYPE:=24kc
lantiq: add a subtarget for the xrx200 SoC family Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38029
2013-09-18 05:46:00 +08:00
lantiq/xrx200: cleanup default packages Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44867
2015-03-17 17:44:06 +08:00
DEFAULT_PACKAGES+=kmod-leds-gpio \
kmod-gpio-button-hotplug \
lantiq-vdsl-fw: update to provide recent vectoring firmware Recent Speedport firmware downloads only work over HTTPS, so the user either needs to provide the already downloaded file or install ustream-ssl-* as well as ca-certificates or ca-bundle. So to get VDSL2 with vectoring on xRX200, simply run vdsl_fw_install.sh on the target and either provide the downloaded file as instructed or make sure the device is connected to the Internet and can download that HTTPS url itself. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-06-15 18:21:03 +08:00
ltq-vdsl-vr9-vectoring-fw-installer \
lantiq/xrx200: cleanup default packages Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44867
2015-03-17 17:44:06 +08:00
kmod-ltq-vdsl-vr9-mei \
kmod-ltq-vdsl-vr9 \
kmod-ltq-atm-vr9 \
ltq-deu: add ltq-deu back to default packages After enhancing ltq-deu, build it by default for the devices using it. Reverts: 964863b ("ltq-deu: Mark lantiq DEU broken") Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
2022-01-13 21:30:07 +08:00
kmod-ltq-deu-vr9 \
lantiq/xrx200: cleanup default packages Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44867
2015-03-17 17:44:06 +08:00
kmod-ltq-ptm-vr9 \
ltq-vdsl-app: rename to ltq-vdsl-vr9-app This matches the scheme used by other target packages and will avoid confusion with any future version. Signed-off-by: Andre Heider <a.heider@gmail.com>
2022-08-23 21:18:49 +08:00
ltq-vdsl-vr9-app \
lantiq: un-macro the image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-06-02 04:43:58 +08:00
dsl-vrx200-firmware-xdsl-a \
dsl-vrx200-firmware-xdsl-b-patch \
lantiq: xrx200: switch the subtarget to the mainline DSA driver Enable the XRX200 PMAC, GSWIP DSA tag and GSIP DSA drivers in the 5.4 kernel config. Update the existing vr9_*.dts{,i} to use the new Ethernet and switch drivers. Drop the swconfig package from the xrx200 target because swconfig doesn't manage DSA based switches. The new /etc/config/network format for the DSA driver is not compatible with the old (swconfig) based one. Show a message during sysupgrade notifying users about this change and asking them to start with a fresh config (or forcefully update and then migrate the config manually). Failsafe mode can now automatically bring up the first lan interface based on board.json including DSA based setups. Drop 05_set_preinit_iface_lantiq from the xRX200 sub-target as this is not needed anymore. For now we are keeping it for the ase, xway and xway_legacy until there's some confirmation that it can be dropped from there as well. While here, some boards also receive minor fixups: - Use LAN1 as LAN1 (according to a photo this port can also be configured as WAN) on the Buffalo WBMR-300HPD. This makes it easier to read the port mapping because otherwise we would have LAN{2,3,4} and WAN (which was the case for the non-DSA version previously). - vr9_avm_fritz3390.dts: move the "gpio" comment from port 0 and 1 to their corresponding PHYs - vr9_tplink_vr200.dtsi: move the "gpio" comment from port 0 to PHY 0 - vr9_tplink_tdw89x0.dtsi: move the "gpio" comment from port 0 to PHY 0 Acked-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl> Tested-by: Notupus <notpp46@googlemail.com> # TD-W9980/DM200/FRITZ 7430 Tested-by: Martin Schiller <ms@dev.tdt.de> # tested on TDT VR2020 Tested-by: Martin Schiller <ms@dev.tdt.de> # tested on TP-Link TD-W8980B Tested-by: Martin Schiller <ms@dev.tdt.de> # tested on ZyXEL P-2812HNU-F1 Tested-by: Daniel Kestrel <kestrel1974@t-online.de> # tested on Fritzbox 7490 Tested-by: Daniel Kestrel <kestrel1974@t-online.de> # tested on Fritzbox 3490 Tested-by: @jospezial <jospezial@gmx.de> # tested on VGV7510KW22 (o2 Box 6431) Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2020-06-07 21:07:28 +08:00
ppp-mod-pppoa
lantiq: add a subtarget for the xrx200 SoC family Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38029
2013-09-18 05:46:00 +08:00
define Target/Description
Lantiq XRX200
endef
Reference in New Issue Copy Permalink