immortalwrt/target/linux/ipq40xx/Makefile

include $(TOPDIR)/rules.mk

ARCH:=arm
BOARD:=ipq40xx
BOARDNAME:=Qualcomm Atheros IPQ40XX
FEATURES:=squashfs fpu ramdisk nand
CPU_TYPE:=cortex-a7
CPU_SUBTYPE:=neon-vfpv4
MAINTAINER:=John Crispin <john@phrozen.org>
SUBTARGETS:=generic

# TODO: drop kmod-usb-dwc3-of-simple when migrating to 4.19
KERNEL_PATCHVER:=4.14

KERNELNAME:=zImage Image dtbs

include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += \
	kmod-usb-dwc3-of-simple kmod-usb-dwc3-qcom \
	kmod-leds-gpio kmod-gpio-button-hotplug swconfig \
	kmod-ath10k wpad-openssl uboot-envtools \
	kmod-usb3 kmod-usb-dwc3 ath10k-firmware-qca4019 \
	autocore-arm e2fsprogs

$(eval $(call BuildTarget))
migrate kernel package to support 4.14.32 2018-04-08 17:31:55 +08:00			`include $(TOPDIR)/rules.mk`

			`ARCH:=arm`
			`BOARD:=ipq40xx`
			`BOARDNAME:=Qualcomm Atheros IPQ40XX`
			`FEATURES:=squashfs fpu ramdisk nand`
			`CPU_TYPE:=cortex-a7`
			`CPU_SUBTYPE:=neon-vfpv4`
			`MAINTAINER:=John Crispin <john@phrozen.org>`
ipqx0xx: add Generic subtarget Both targets miss a subtarget causing an image naming style which is different from other all othe targets, even tho it already uses `x/generic/` as subfolder as if the subtarget would exist. This commit adds the Generic subtarget resulting in consistent naming. Fixes: c9e45c2 ("uboot-fritz4040: update PKG_MIRROR_HASH") Fixes: bb43571 ("uboot-fritz4040: update to latest HEAD") Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit 853e4dd3062df7cb5704b15d6af6730e3194b571) 2019-08-22 08:59:24 +08:00			`SUBTARGETS:=generic`
migrate kernel package to support 4.14.32 2018-04-08 17:31:55 +08:00
ipq40xx: add kernel 4.19 support 2019-02-26 23:11:31 +08:00			`# TODO: drop kmod-usb-dwc3-of-simple when migrating to 4.19`
ipq40xx: switch to ath10k 2020-04-18 11:40:34 +08:00			`KERNEL_PATCHVER:=4.14`
migrate kernel package to support 4.14.32 2018-04-08 17:31:55 +08:00
			`KERNELNAME:=zImage Image dtbs`

			`include $(INCLUDE_DIR)/target.mk`
			`DEFAULT_PACKAGES += \`
ipq40xx: switch to kernel 4.19 2020-03-12 19:36:40 +08:00			`kmod-usb-dwc3-of-simple kmod-usb-dwc3-qcom \`
migrate kernel package to support 4.14.32 2018-04-08 17:31:55 +08:00			`kmod-leds-gpio kmod-gpio-button-hotplug swconfig \`
ipq40xx: add uboot-envtools to default packages When support for Luma WRTQ-329ACN was added, the instructions for flashing this device include using tools from uboot-envtools package. Unfortunately the OpenWrt buildroot system omits packages from DEVICE_PACKAGES when CONFIG_TARGET_MULTI_PROFILE, CONFIG_TARGET_PER_DEVICE_ROOTFS, CONFIG_TARGET_ALL_PROFILES are set. In result the official images are without tools mentioned in the instruction. The workoround for the fashing would be installing uboot-envtools when booted with initramfs image, but not always the access to internet is available. The other method would be to issue the necesary command in U-Boot environment but some serial terminals default configuration don't work well with pasting lines longer than 80 chars. Therefore add uboot-envtools to default packages, which adds really small flash footprint to rootfs, where increased size usually is not an issue. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> 2021-05-25 21:26:06 +08:00			`kmod-ath10k wpad-openssl uboot-envtools \`
ipq40xx: switch to ath10k 2020-04-18 11:40:34 +08:00			`kmod-usb3 kmod-usb-dwc3 ath10k-firmware-qca4019 \`
target: drop some default packages Let users to decide build them or not. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> 2021-09-11 04:59:25 +08:00			`autocore-arm e2fsprogs`
migrate kernel package to support 4.14.32 2018-04-08 17:31:55 +08:00
			`$(eval $(call BuildTarget))`