fish/immortalwrt
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
a6f0ac13f5
immortalwrt/target/linux/bcm63xx/base-files/lib/upgrade/platform.sh

53 lines
894 B
Bash
Raw Normal View History

add support for sysupgrade (#5117) SVN-Revision: 15900
2009-05-18 00:53:57 +08:00
PART_NAME=linux
bcm63xx: add support for Comtrend VR-3032u Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-05-15 00:19:35 +08:00
REQUIRE_IMAGE_METADATA=0
add support for sysupgrade (#5117) SVN-Revision: 15900
2009-05-18 00:53:57 +08:00
platform_check_image() {
target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGC ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct var $# (=number of args) here. under normal conditions this had no impact, but we should at least correct it. the error was observable like this: root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh root@box:~ . /lib/upgrade/platform.sh root@box:~ . /lib/upgrade/common.sh root@box:~ platform_check_image /tmp/myfirmware.bin ash: bad number root@box:~ echo $? 0 Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> SVN-Revision: 40915
2014-06-02 20:43:22 +08:00
[ "$#" -gt 1 ] && return 1
bcm63xx: add support for Comtrend VR-3032u Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-05-15 00:19:35 +08:00
case "$(board_name)" in
bcm63xx: add Comtrend VG-8050 support BCM63169 with 128M RAM, 128M NAND and BCM53125 switch. Switch is connected by HSSPI to CS5. More info: https://openwrt.org/toh/comtrend/vg8050 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-05-19 16:21:46 +08:00
comtrend,vg-8050|\
bcm63xx: add NETGEAR DGND3700v2 support BCM6362 with 64M RAM, 32M NAND and BCM53125 switch. Switch is connected by MMAP, which is currently unsupported (no VLANs). More info: https://openwrt.org/toh/netgear/dgnd3700v2 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-05-19 14:55:06 +08:00
comtrend,vr-3032u|\
bcm63xx: WIP: add Huawei HG253s v2 support Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-05-21 00:00:23 +08:00
huawei,hg253s-v2|\
bcm63xx: add unmodded SERCOMM AD1018 support Until now only HW modded SPI flash version was supported. BCM6328 with 64M RAM and 128M NAND. More info: https://openwrt.org/toh/sercomm/ad1018 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-05-19 19:29:12 +08:00
netgear,dgnd3700-v2|\
bcm63xx: add support for the Sercomm H500-s Sercomm H500-s is an xDSL dual band wireless router based on Broadcom BCM63167 SoC. Hardware: SoC: Broadcom BCM63167 CPU: BMIPS4350 V8.0, 400 MHz, 2 cores Flash: NAND 128 MiB RAM: DDR3 128 MiB Ethernet: 4x 10/100/1000 Mbps Switch: BCM53134S Wireless: 802.11b/g/n: BCM435f (integrated) 802.11ac: Quantenna QT3740BC (onboard SoC) USB: 1x 2.0 LEDs/Buttons: 11x / 2x Flash instruction, web UI: 1. Reset to defaults using the reset button if the admin password is unknown 2. Login into the web UI as admin. Address: http://192.168.0.1 User: admin Password: VF-ESVodafone-H-500-s or l033i-h500s 3. Go to Settings -> Firmware Update, and select the Openwrt factory firmware 4. Update the firmware. 5. Wait until it finish, the device will reboot with Openwrt installed on the alternative image partitions keeping the stock firmware in the former. Notes: - The patch also adds support for the lowi version. Only the factory firmware is different. - The integrated Wifi in the Broadcom Soc isn't still supported. - The Quantenna 802.11ac wifi works ok, but needs to be configured with the Quantenna client application. It can't be configured with Luci nor any iw command since it's a separated subsystem linked via ethernet. - The BCM53134S external switch is managed via MDIO which isn't supported in this target. Therefore it will behave as a dumb switch. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
2020-06-07 16:55:56 +08:00
sercomm,ad1018|\
sercomm,h500-s-lowi|\
sercomm,h500-s-vfes)
bcm63xx: add support for Comtrend VR-3032u Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-05-15 00:19:35 +08:00
# NAND sysupgrade
return 0
;;
esac
add support for sysupgrade (#5117) SVN-Revision: 15900
2009-05-18 00:53:57 +08:00
case "$(get_magic_word "$1")" in
bcm63xx: Fix sysupgrade for tag-version 7 and 8 Fix sysupgrade for tag-version 7 and 8. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 35724
2013-02-21 19:45:41 +08:00
3600|3700|3800)
bcm63xx: add support for Comtrend VR-3032u Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-05-15 00:19:35 +08:00
# CFE tag versions
add support for sysupgrade (#5117) SVN-Revision: 15900
2009-05-18 00:53:57 +08:00
return 0
;;
*)
echo "Invalid image type. Please use only .bin files"
return 1
;;
esac
}
bcm63xx: add support for Comtrend VR-3032u Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-05-15 00:19:35 +08:00
platform_do_upgrade() {
case "$(board_name)" in
bcm63xx: add Comtrend VG-8050 support BCM63169 with 128M RAM, 128M NAND and BCM53125 switch. Switch is connected by HSSPI to CS5. More info: https://openwrt.org/toh/comtrend/vg8050 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-05-19 16:21:46 +08:00
comtrend,vg-8050|\
bcm63xx: add NETGEAR DGND3700v2 support BCM6362 with 64M RAM, 32M NAND and BCM53125 switch. Switch is connected by MMAP, which is currently unsupported (no VLANs). More info: https://openwrt.org/toh/netgear/dgnd3700v2 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-05-19 14:55:06 +08:00
comtrend,vr-3032u|\
bcm63xx: WIP: add Huawei HG253s v2 support Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-05-21 00:00:23 +08:00
huawei,hg253s-v2|\
bcm63xx: use the generic nand upgrade on Sercomm devices The Sercomm devices don't need the jffs2 cleanmarkers for the kernel partition. With the stock firmware they are only added when the bootloader partition is upgraded. Furthermore, on the Sercomm H500-s, the specific cfe_jffs2_upgrade_tar function causes OOB corruption. As a result of this, combined with the nature of the mtdsplit driver, the upgrade procedure ends in a bricked device. Use the generic nand_do_upgrade provided by the OpenWrt common functions. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
2020-06-16 06:09:33 +08:00
netgear,dgnd3700-v2)
REQUIRE_IMAGE_METADATA=1
bcm63xx: switch to standard nand_do_upgrade Now that JFFS2 cleanmarkers are supported on the standard nand_do_upgrade function we can start using it on bcm63xx. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-06-15 16:53:08 +08:00
CI_JFFS2_CLEAN_MARKERS=1
nand_do_upgrade "$1"
bcm63xx: use the generic nand upgrade on Sercomm devices The Sercomm devices don't need the jffs2 cleanmarkers for the kernel partition. With the stock firmware they are only added when the bootloader partition is upgraded. Furthermore, on the Sercomm H500-s, the specific cfe_jffs2_upgrade_tar function causes OOB corruption. As a result of this, combined with the nature of the mtdsplit driver, the upgrade procedure ends in a bricked device. Use the generic nand_do_upgrade provided by the OpenWrt common functions. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
2020-06-16 06:09:33 +08:00
;;
bcm63xx: add support for the Sercomm H500-s Sercomm H500-s is an xDSL dual band wireless router based on Broadcom BCM63167 SoC. Hardware: SoC: Broadcom BCM63167 CPU: BMIPS4350 V8.0, 400 MHz, 2 cores Flash: NAND 128 MiB RAM: DDR3 128 MiB Ethernet: 4x 10/100/1000 Mbps Switch: BCM53134S Wireless: 802.11b/g/n: BCM435f (integrated) 802.11ac: Quantenna QT3740BC (onboard SoC) USB: 1x 2.0 LEDs/Buttons: 11x / 2x Flash instruction, web UI: 1. Reset to defaults using the reset button if the admin password is unknown 2. Login into the web UI as admin. Address: http://192.168.0.1 User: admin Password: VF-ESVodafone-H-500-s or l033i-h500s 3. Go to Settings -> Firmware Update, and select the Openwrt factory firmware 4. Update the firmware. 5. Wait until it finish, the device will reboot with Openwrt installed on the alternative image partitions keeping the stock firmware in the former. Notes: - The patch also adds support for the lowi version. Only the factory firmware is different. - The integrated Wifi in the Broadcom Soc isn't still supported. - The Quantenna 802.11ac wifi works ok, but needs to be configured with the Quantenna client application. It can't be configured with Luci nor any iw command since it's a separated subsystem linked via ethernet. - The BCM53134S external switch is managed via MDIO which isn't supported in this target. Therefore it will behave as a dumb switch. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
2020-06-07 16:55:56 +08:00
sercomm,ad1018|\
sercomm,h500-s-lowi|\
sercomm,h500-s-vfes)
bcm63xx: add support for Comtrend VR-3032u Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-05-15 00:19:35 +08:00
REQUIRE_IMAGE_METADATA=1
bcm63xx: use the generic nand upgrade on Sercomm devices The Sercomm devices don't need the jffs2 cleanmarkers for the kernel partition. With the stock firmware they are only added when the bootloader partition is upgraded. Furthermore, on the Sercomm H500-s, the specific cfe_jffs2_upgrade_tar function causes OOB corruption. As a result of this, combined with the nature of the mtdsplit driver, the upgrade procedure ends in a bricked device. Use the generic nand_do_upgrade provided by the OpenWrt common functions. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
2020-06-16 06:09:33 +08:00
nand_do_upgrade "$1"
bcm63xx: add support for Comtrend VR-3032u Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-05-15 00:19:35 +08:00
;;
*)
default_do_upgrade "$1"
;;
esac
}
Reference in New Issue Copy Permalink