56 lines
2.2 KiB
Diff
56 lines
2.2 KiB
Diff
|
From: Chuanhong Guo <gch981213@gmail.com>
|
||
|
|
Date: Sat, 13 Jul 2019 17:59:03 +0800
|
||
|
|
Subject: [PATCH] ramips: hack: add esdmode pinctrl group
|
||
|
|
|
||
|
|
Since mt76x8an ver1 eco2, SDXC pins can be switched to the
|
||
|
|
following pinmap:
|
||
|
|
sd_d1 -> PAD_I2S_SDI
|
||
|
|
sd_d0 -> PAD_I2S_WS
|
||
|
|
sd_cmd -> PAD_I2S_CLK
|
||
|
|
sd_d3 -> PAD_I2C_SCLK
|
||
|
|
sd_d2 -> PAD_I2C_SD
|
||
|
|
sd_clk -> PAD_GPIO0
|
||
|
|
sd_wp -> PAD_TXD1
|
||
|
|
sd_cd -> PAD_RXD1
|
||
|
|
|
||
|
|
To use this pinmap, one would need to set ESD_MODE bit (bit 15)
|
||
|
|
to 1 in GPIO1_MODE and switch other used pads into GPIO mode.
|
||
|
|
|
||
|
|
MTK called this pinmap "router mode" and the pinmap described
|
||
|
|
in their datasheed is called "iot mode".
|
||
|
|
|
||
|
|
This patch is hacky because:
|
||
|
|
1. pinmux-rt2880 doesn't support reserving noncontiguous GPIO
|
||
|
|
pins so those GPIOs can't be properly reserved.
|
||
|
|
2. it misused "gpio" function for "iot mode", due to the fact
|
||
|
|
that this mode doesn't reserve any GPIOs.
|
||
|
|
|
||
|
|
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
|
||
|
|
---
|
||
|
|
--- a/arch/mips/ralink/mt7620.c
|
||
|
|
+++ b/arch/mips/ralink/mt7620.c
|
||
|
|
@@ -149,6 +149,7 @@ static struct rt2880_pmx_func refclk_grp
|
||
|
|
static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 36, 1) };
|
||
|
|
static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 38, 1) };
|
||
|
|
static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) };
|
||
|
|
+static struct rt2880_pmx_func esd_mode_grp_mt7628[] = { FUNC("sdxc", 1, 0, 0) };
|
||
|
|
|
||
|
|
static struct rt2880_pmx_func sd_mode_grp_mt7628[] = {
|
||
|
|
FUNC("jtag", 3, 22, 8),
|
||
|
|
@@ -297,6 +298,7 @@ static struct rt2880_pmx_func wled_an_gr
|
||
|
|
#define MT7628_GPIO_MODE_I2C 20
|
||
|
|
#define MT7628_GPIO_MODE_REFCLK 18
|
||
|
|
#define MT7628_GPIO_MODE_PERST 16
|
||
|
|
+#define MT7628_GPIO_MODE_ESDMODE 15
|
||
|
|
#define MT7628_GPIO_MODE_WDT 14
|
||
|
|
#define MT7628_GPIO_MODE_SPI 12
|
||
|
|
#define MT7628_GPIO_MODE_SDMODE 10
|
||
|
|
@@ -319,6 +321,7 @@ static struct rt2880_pmx_group mt7628an_
|
||
|
|
1, MT7628_GPIO_MODE_I2C),
|
||
|
|
GRP("refclk", refclk_grp_mt7628, 1, MT7628_GPIO_MODE_REFCLK),
|
||
|
|
GRP("perst", perst_grp_mt7628, 1, MT7628_GPIO_MODE_PERST),
|
||
|
|
+ GRP_G("esdmode", esd_mode_grp_mt7628, 1, 0, MT7628_GPIO_MODE_ESDMODE),
|
||
|
|
GRP("wdt", wdt_grp_mt7628, 1, MT7628_GPIO_MODE_WDT),
|
||
|
|
GRP("spi", spi_grp_mt7628, 1, MT7628_GPIO_MODE_SPI),
|
||
|
|
GRP_G("sdmode", sd_mode_grp_mt7628, MT7628_GPIO_MODE_MASK,
|