immortalwrt/target/linux/ramips/rt305x/target.mk

#
# Copyright (C) 2009 OpenWrt.org
#

SUBTARGET:=rt305x
BOARDNAME:=RT3x5x/RT5350 based boards
FEATURES+=usb ramdisk small_flash
CPU_TYPE:=24kc

DEFAULT_PACKAGES += kmod-rt2800-soc wpad-mini

define Target/Description
	Build firmware images for Ralink RT3x5x/RT5350 based boards.
endef
initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-31 03:15:51 +08:00			`#`
			`# Copyright (C) 2009 OpenWrt.org`
			`#`

			`SUBTARGET:=rt305x`
ramips: set correct description for rt305x subtarget Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36775 2013-05-30 23:59:56 +08:00			`BOARDNAME:=RT3x5x/RT5350 based boards`
kernel: only optimized for size if small_flash Add a new config option to allow to select the default compile optimization level for the kernel. Select the optimization for size by default if the small_flash feature is set. Otherwise "Optimize for performance" is set. Add the small_flash feature flag to all (sub)targets which had the optimization for size in their default kernel config. Remove CC_OPTIMIZE_FOR_* symbols from all kernel configs to apply the new setting. Exceptions to the above are: - lantiq, where the optimization for size is only required for the xway_legacy subtarget but was set for the whole target - mediatek, ramips/mt7620 & ramips/mt76x8 where boards should have plenty of space and an optimization for size doesn't make much sense - rb532, which has 128MByte flash Signed-off-by: Mathias Kresin <dev@kresin.me> 2018-07-10 02:48:56 +08:00			`FEATURES+=usb ramdisk small_flash`
ramips: switch from 24kec to 24kc Since the only difference between 24Kec and 24Kc is the addition of DSP ASE support, and we don't use it anymore, there is no need to keep 24Kec as a separate cpu type. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> 2016-08-08 17:27:04 +08:00			`CPU_TYPE:=24kc`
initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-31 03:15:51 +08:00
ramips: purge default packages on MT7621 In order to have a smaller initramfs image remove all packages not needed on all devices and add them explicitely for those actually needing them. Also remove wpad-mini from ramips default package set and add it to all sub-targets except for MT7621. While at it reorder packages alphabetically and replace kmod-mt76 with kmod-mt7603 and/or kmod-mt76x2 depending on the chip actually used on a specific board. Hopefully fixes FS#758 Signed-off-by: Daniel Golle <daniel@makrotopia.org> 2017-05-04 20:07:47 +08:00			`DEFAULT_PACKAGES += kmod-rt2800-soc wpad-mini`
ramips: fix rt2x00 handling of default packages for subtargets Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 41145 2014-06-12 01:01:19 +08:00
initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-31 03:15:51 +08:00			`define Target/Description`
ramips: set correct description for rt305x subtarget Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36775 2013-05-30 23:59:56 +08:00			`Build firmware images for Ralink RT3x5x/RT5350 based boards.`
initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-31 03:15:51 +08:00			`endef`