fish/immortalwrt
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
db35b0ef9f
immortalwrt/target/linux/ath79/mikrotik/config-default

51 lines
1.2 KiB
Plaintext
Raw Normal View History

ath79: add mikrotik subtarget This commit creates the ath79/mikrotik subtarget in order to support MikroTik devices based on Qualcomm Atheros MIPS SoCs. MikroTik devices need a couple of specific features: the split MiNOR firmware MTD format, which is not used by other devices, and the 4k sector erase size on SPI NOR storage, which can not be added to the ath79/generic and ath79/nand subtargets now. Additionally, the commit moves the two MikroTik devices already in the generic and nand subtargets to this new one. Tested on the RB922 board and the wAP AC router. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2020-02-28 23:01:02 +08:00
CONFIG_CRC16=y
CONFIG_CRYPTO_DEFLATE=y
ath79: add missing symbols by refreshing kernel configs Some symbols are outdated or missing due to daily kernel bumps. It's better to re-add them. All configs are automatically refreshed by 'make kernel_oldconfig CONFIG_TARGET=taget' and 'make kernel_oldconfig CONFIG_TARGET=subtarget' Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-05-30 15:05:06 +08:00
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_ZSTD=y
ath79: add MikroTik suffix to the local GPIO latch driver The upcoming 6.6 kernel will introduce a new upstream generic "gpio-latch" driver. It will conflict with the downstream MikroTik GPIO latch driver. Let's rename it to avoid any potential issues. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2024-03-16 08:39:16 +08:00
CONFIG_GPIO_LATCH_MIKROTIK=y
ath79: add support for MikroTik RouterBOARD 493G (rb4xx series) This patch adds support for the MikroTik RouterBOARD RB493G, ported from the ar71xx target. See https://routerboard.com/RB493G for details Specification: - SoC Qualcomm Atheros AR7161 - RAM: 256 MiB - Storage: 128MiB NAND - Ethernet: 9x 1000/100/10 Mbps - USB 1x 2.0 / 1.0 type A - PCIe: 3x Mini slot - MicroSD slot Working: - Board/system detection - Ethernet - SPI - NAND - LEDs - USB - Sysupgrade Enabled (but untested due to lack of hardware): - PCIe - ath79_pci_irq struct has the slot/pin/IRQ mappings if needed Installation methods: - tftp boot initramfs image, scp then flash via "sysupgrade -n" - nand boot existing OpenWrt, scp then flash via "sysupgrade -n" Notes: - initramfs image will not work if uncompressed image size over ~8.5Mb - The "rb4xx" drivers have been enabled Signed-off-by: Christopher Hill <ch6574@gmail.com>
2020-05-26 09:10:00 +08:00
CONFIG_GPIO_RB4XX=y
ath79: add missing symbols by refreshing kernel configs Some symbols are outdated or missing due to daily kernel bumps. It's better to re-add them. All configs are automatically refreshed by 'make kernel_oldconfig CONFIG_TARGET=taget' and 'make kernel_oldconfig CONFIG_TARGET=subtarget' Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-05-30 15:05:06 +08:00
CONFIG_GPIO_RB91X_KEY=y
ath79: add mikrotik subtarget This commit creates the ath79/mikrotik subtarget in order to support MikroTik devices based on Qualcomm Atheros MIPS SoCs. MikroTik devices need a couple of specific features: the split MiNOR firmware MTD format, which is not used by other devices, and the 4k sector erase size on SPI NOR storage, which can not be added to the ath79/generic and ath79/nand subtargets now. Additionally, the commit moves the two MikroTik devices already in the generic and nand subtargets to this new one. Tested on the RB922 board and the wAP AC router. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2020-02-28 23:01:02 +08:00
CONFIG_GPIO_WATCHDOG=y
CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
ath79: add missing symbols by refreshing kernel configs Some symbols are outdated or missing due to daily kernel bumps. It's better to re-add them. All configs are automatically refreshed by 'make kernel_oldconfig CONFIG_TARGET=taget' and 'make kernel_oldconfig CONFIG_TARGET=subtarget' Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-05-30 15:05:06 +08:00
CONFIG_GRO_CELLS=y
CONFIG_LZO_COMPRESS=y
ath79: add mikrotik subtarget This commit creates the ath79/mikrotik subtarget in order to support MikroTik devices based on Qualcomm Atheros MIPS SoCs. MikroTik devices need a couple of specific features: the split MiNOR firmware MTD format, which is not used by other devices, and the 4k sector erase size on SPI NOR storage, which can not be added to the ath79/generic and ath79/nand subtargets now. Additionally, the commit moves the two MikroTik devices already in the generic and nand subtargets to this new one. Tested on the RB922 board and the wAP AC router. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2020-02-28 23:01:02 +08:00
CONFIG_LZO_DECOMPRESS=y
ath79: add missing symbols by refreshing kernel configs Some symbols are outdated or missing due to daily kernel bumps. It's better to re-add them. All configs are automatically refreshed by 'make kernel_oldconfig CONFIG_TARGET=taget' and 'make kernel_oldconfig CONFIG_TARGET=subtarget' Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-05-30 15:05:06 +08:00
CONFIG_MFD_CORE=y
ath79: add support for MikroTik RouterBOARD 493G (rb4xx series) This patch adds support for the MikroTik RouterBOARD RB493G, ported from the ar71xx target. See https://routerboard.com/RB493G for details Specification: - SoC Qualcomm Atheros AR7161 - RAM: 256 MiB - Storage: 128MiB NAND - Ethernet: 9x 1000/100/10 Mbps - USB 1x 2.0 / 1.0 type A - PCIe: 3x Mini slot - MicroSD slot Working: - Board/system detection - Ethernet - SPI - NAND - LEDs - USB - Sysupgrade Enabled (but untested due to lack of hardware): - PCIe - ath79_pci_irq struct has the slot/pin/IRQ mappings if needed Installation methods: - tftp boot initramfs image, scp then flash via "sysupgrade -n" - nand boot existing OpenWrt, scp then flash via "sysupgrade -n" Notes: - initramfs image will not work if uncompressed image size over ~8.5Mb - The "rb4xx" drivers have been enabled Signed-off-by: Christopher Hill <ch6574@gmail.com>
2020-05-26 09:10:00 +08:00
CONFIG_MFD_RB4XX_CPLD=y
ath79/mikrotik: enable mikrotik platform driver Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2020-03-25 05:31:17 +08:00
CONFIG_MIKROTIK=y
CONFIG_MIKROTIK_RB_SYSFS=y
ath79: add mikrotik subtarget This commit creates the ath79/mikrotik subtarget in order to support MikroTik devices based on Qualcomm Atheros MIPS SoCs. MikroTik devices need a couple of specific features: the split MiNOR firmware MTD format, which is not used by other devices, and the 4k sector erase size on SPI NOR storage, which can not be added to the ath79/generic and ath79/nand subtargets now. Additionally, the commit moves the two MikroTik devices already in the generic and nand subtargets to this new one. Tested on the RB922 board and the wAP AC router. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2020-02-28 23:01:02 +08:00
CONFIG_MTD_NAND_AR934X=y
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_NAND_ECC=y
ath79: mikrotik: enable ecc hamming algorithm for kernel 5.15 This algorithm has it's own symbol now. Enable it to fix nand support Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2022-04-05 19:52:25 +08:00
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
ath79: add support for MikroTik RouterBOARD 493G (rb4xx series) This patch adds support for the MikroTik RouterBOARD RB493G, ported from the ar71xx target. See https://routerboard.com/RB493G for details Specification: - SoC Qualcomm Atheros AR7161 - RAM: 256 MiB - Storage: 128MiB NAND - Ethernet: 9x 1000/100/10 Mbps - USB 1x 2.0 / 1.0 type A - PCIe: 3x Mini slot - MicroSD slot Working: - Board/system detection - Ethernet - SPI - NAND - LEDs - USB - Sysupgrade Enabled (but untested due to lack of hardware): - PCIe - ath79_pci_irq struct has the slot/pin/IRQ mappings if needed Installation methods: - tftp boot initramfs image, scp then flash via "sysupgrade -n" - nand boot existing OpenWrt, scp then flash via "sysupgrade -n" Notes: - initramfs image will not work if uncompressed image size over ~8.5Mb - The "rb4xx" drivers have been enabled Signed-off-by: Christopher Hill <ch6574@gmail.com>
2020-05-26 09:10:00 +08:00
CONFIG_MTD_NAND_RB4XX=y
ath79: add NAND driver for MikroTik RB91xG series Main part is copied from ar71xx original driver rb91x_nand written by Gabor Juhos <juhosg@openwrt.org>. What is done: * Support of kernel 5.4 and 5.10, * DTS support, * New gpio API (gpiod_*) support. Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Denis Kalashnikov <denis281089@gmail.com>
2021-05-27 16:16:45 +08:00
CONFIG_MTD_NAND_RB91X=y
ath79: MikroTik: fix missing nand on kernel 5.4 Following symbol got renamed upstream: CONFIG_MTD_NAND --> CONFIG_MTD_RAW_NAND Also add this renamed symbol so NAND also works on kernel 5.4. After: [ 0.628372] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1 [ 0.634862] nand: Samsung NAND 128MiB 3,3V 8-bit [ 0.639554] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 0.647263] Scanning device for bad blocks [ 0.656228] random: fast init done [ 0.789652] 3 fixed-partitions partitions found on MTD device ar934x-nand [ 0.796550] Creating 3 MTD partitions on "ar934x-nand": [ 0.801874] 0x000000000000-0x000000040000 : "booter" [ 0.807715] 0x000000040000-0x000000400000 : "kernel" [ 0.813551] 0x000000400000-0x000008000000 : "ubi" Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2020-04-16 18:21:52 +08:00
CONFIG_MTD_RAW_NAND=y
ath79/mikrotik: enable CONFIG_MTD_ROUTERBOOT_PARTS Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2020-03-21 19:17:49 +08:00
CONFIG_MTD_ROUTERBOOT_PARTS=y
ath79: add mikrotik subtarget This commit creates the ath79/mikrotik subtarget in order to support MikroTik devices based on Qualcomm Atheros MIPS SoCs. MikroTik devices need a couple of specific features: the split MiNOR firmware MTD format, which is not used by other devices, and the 4k sector erase size on SPI NOR storage, which can not be added to the ath79/generic and ath79/nand subtargets now. Additionally, the commit moves the two MikroTik devices already in the generic and nand subtargets to this new one. Tested on the RB922 board and the wAP AC router. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2020-02-28 23:01:02 +08:00
CONFIG_MTD_SPI_NAND=y
mikrotik: enable variable size erase Add support for variable size erase blocks. Enable it to all targets which has mikrotik targets. Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
2021-12-21 15:46:00 +08:00
CONFIG_MTD_SPI_NOR_USE_VARIABLE_ERASE=y
ath79: add mikrotik subtarget This commit creates the ath79/mikrotik subtarget in order to support MikroTik devices based on Qualcomm Atheros MIPS SoCs. MikroTik devices need a couple of specific features: the split MiNOR firmware MTD format, which is not used by other devices, and the 4k sector erase size on SPI NOR storage, which can not be added to the ath79/generic and ath79/nand subtargets now. Additionally, the commit moves the two MikroTik devices already in the generic and nand subtargets to this new one. Tested on the RB922 board and the wAP AC router. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2020-02-28 23:01:02 +08:00
CONFIG_MTD_SPLIT_MINOR_FW=y
CONFIG_MTD_UBI=y
ath79: add missing symbols by refreshing kernel configs Some symbols are outdated or missing due to daily kernel bumps. It's better to re-add them. All configs are automatically refreshed by 'make kernel_oldconfig CONFIG_TARGET=taget' and 'make kernel_oldconfig CONFIG_TARGET=subtarget' Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-05-30 15:05:06 +08:00
CONFIG_MTD_UBI_BEB_LIMIT=20
ath79: add mikrotik subtarget This commit creates the ath79/mikrotik subtarget in order to support MikroTik devices based on Qualcomm Atheros MIPS SoCs. MikroTik devices need a couple of specific features: the split MiNOR firmware MTD format, which is not used by other devices, and the 4k sector erase size on SPI NOR storage, which can not be added to the ath79/generic and ath79/nand subtargets now. Additionally, the commit moves the two MikroTik devices already in the generic and nand subtargets to this new one. Tested on the RB922 board and the wAP AC router. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2020-02-28 23:01:02 +08:00
CONFIG_MTD_UBI_BLOCK=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
ath79: add missing symbols by refreshing kernel configs Some symbols are outdated or missing due to daily kernel bumps. It's better to re-add them. All configs are automatically refreshed by 'make kernel_oldconfig CONFIG_TARGET=taget' and 'make kernel_oldconfig CONFIG_TARGET=subtarget' Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-05-30 15:05:06 +08:00
CONFIG_NET_DEVLINK=y
ath79: mikrotik: enable SFP on RB922UAGS-5HPaCD This patch enables the SFP cage on the MikroTik RouterBOARD 922UAGS-5HPacD. GPIO16 (tx-disable-gpios) should be governed by the SFP driver to enable or disable transmission, but no change is observed. Therefore, it is left as output high to ensure the SFP module is forced to transmit. Tested on a RouterBOARD 922UAGS-5HPacD board, with a CISCO GLC-LH-SMD 1310nm module and an unbranded GLC-T RJ45 Gigabit module. PC=>router iperf3 tests deliver 440/300 Mbps up/down, both via regular eth0 port or SFP port with RJ45 module. Bridge between eth0 and eth1 delivers 950 Mbps symmetric. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2020-12-19 05:26:55 +08:00
CONFIG_NET_DSA=y
ath79: add mikrotik subtarget This commit creates the ath79/mikrotik subtarget in order to support MikroTik devices based on Qualcomm Atheros MIPS SoCs. MikroTik devices need a couple of specific features: the split MiNOR firmware MTD format, which is not used by other devices, and the 4k sector erase size on SPI NOR storage, which can not be added to the ath79/generic and ath79/nand subtargets now. Additionally, the commit moves the two MikroTik devices already in the generic and nand subtargets to this new one. Tested on the RB922 board and the wAP AC router. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2020-02-28 23:01:02 +08:00
CONFIG_NET_SWITCHDEV=y
generic: platform/mikrotik: add NVMEM layout driver Currently, information from MikroTik hard_config is only available via sysfs, meaning that we have to rely on userspace to for example setup MACs. So, lets provide a basic NVMEM layout based driver to expose the same cells as sysfs driver exposes. Do note that the we dont extract the WLAN caldata and BDF-s at this point. Reviewed-by: Thibaut VARÈNE <hacks@slashdirt.org> Link: https://github.com/openwrt/openwrt/pull/15665 Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-06-09 18:14:25 +08:00
# CONFIG_NVMEM_LAYOUT_MIKROTIK is not set
ath79: add missing symbols by refreshing kernel configs Some symbols are outdated or missing due to daily kernel bumps. It's better to re-add them. All configs are automatically refreshed by 'make kernel_oldconfig CONFIG_TARGET=taget' and 'make kernel_oldconfig CONFIG_TARGET=subtarget' Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-05-30 15:05:06 +08:00
CONFIG_PHYLINK=y
ath79: add mikrotik subtarget This commit creates the ath79/mikrotik subtarget in order to support MikroTik devices based on Qualcomm Atheros MIPS SoCs. MikroTik devices need a couple of specific features: the split MiNOR firmware MTD format, which is not used by other devices, and the 4k sector erase size on SPI NOR storage, which can not be added to the ath79/generic and ath79/nand subtargets now. Additionally, the commit moves the two MikroTik devices already in the generic and nand subtargets to this new one. Tested on the RB922 board and the wAP AC router. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2020-02-28 23:01:02 +08:00
CONFIG_PHY_AR7100_USB=y
CONFIG_PHY_AR7200_USB=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
ath79: add missing symbols by refreshing kernel configs Some symbols are outdated or missing due to daily kernel bumps. It's better to re-add them. All configs are automatically refreshed by 'make kernel_oldconfig CONFIG_TARGET=taget' and 'make kernel_oldconfig CONFIG_TARGET=subtarget' Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-05-30 15:05:06 +08:00
CONFIG_SGL_ALLOC=y
ath79: add support for MikroTik RouterBOARD 493G (rb4xx series) This patch adds support for the MikroTik RouterBOARD RB493G, ported from the ar71xx target. See https://routerboard.com/RB493G for details Specification: - SoC Qualcomm Atheros AR7161 - RAM: 256 MiB - Storage: 128MiB NAND - Ethernet: 9x 1000/100/10 Mbps - USB 1x 2.0 / 1.0 type A - PCIe: 3x Mini slot - MicroSD slot Working: - Board/system detection - Ethernet - SPI - NAND - LEDs - USB - Sysupgrade Enabled (but untested due to lack of hardware): - PCIe - ath79_pci_irq struct has the slot/pin/IRQ mappings if needed Installation methods: - tftp boot initramfs image, scp then flash via "sysupgrade -n" - nand boot existing OpenWrt, scp then flash via "sysupgrade -n" Notes: - initramfs image will not work if uncompressed image size over ~8.5Mb - The "rb4xx" drivers have been enabled Signed-off-by: Christopher Hill <ch6574@gmail.com>
2020-05-26 09:10:00 +08:00
CONFIG_SPI_RB4XX=y
ath79: add mikrotik subtarget This commit creates the ath79/mikrotik subtarget in order to support MikroTik devices based on Qualcomm Atheros MIPS SoCs. MikroTik devices need a couple of specific features: the split MiNOR firmware MTD format, which is not used by other devices, and the 4k sector erase size on SPI NOR storage, which can not be added to the ath79/generic and ath79/nand subtargets now. Additionally, the commit moves the two MikroTik devices already in the generic and nand subtargets to this new one. Tested on the RB922 board and the wAP AC router. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2020-02-28 23:01:02 +08:00
CONFIG_UBIFS_FS=y
CONFIG_WATCHDOG_CORE=y
ath79: add missing symbols by refreshing kernel configs Some symbols are outdated or missing due to daily kernel bumps. It's better to re-add them. All configs are automatically refreshed by 'make kernel_oldconfig CONFIG_TARGET=taget' and 'make kernel_oldconfig CONFIG_TARGET=subtarget' Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-05-30 15:05:06 +08:00
CONFIG_XXHASH=y
ath79: add mikrotik subtarget This commit creates the ath79/mikrotik subtarget in order to support MikroTik devices based on Qualcomm Atheros MIPS SoCs. MikroTik devices need a couple of specific features: the split MiNOR firmware MTD format, which is not used by other devices, and the 4k sector erase size on SPI NOR storage, which can not be added to the ath79/generic and ath79/nand subtargets now. Additionally, the commit moves the two MikroTik devices already in the generic and nand subtargets to this new one. Tested on the RB922 board and the wAP AC router. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2020-02-28 23:01:02 +08:00
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
ath79: refresh patches and configs to introduce kernel 6.1 support All kernel configs are refreshed by 'make kernel_oldconfig CONFIG_TARGET=target' and 'make kernel_oldconfig CONFIG_TARGET=subtarget'. upstreamed patches: 010-v5.17-spi-ar934x-fix-transfer-and-word-delays.patch 011-v5.17-spi-ar934x-fix-transfer-size.patch 020-v5.18-spi-ath79-Implement-the-spi_mem-interface.patch 030-v5.18-ath79-add-support-for-booting-QCN550x.patch build and run tested on: ath79/generic/ar7241 ath79/generic/qca9563 ath79/nand/ar9344 Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-05-31 11:14:04 +08:00
CONFIG_ZSTD_COMMON=y
ath79: add missing symbols by refreshing kernel configs Some symbols are outdated or missing due to daily kernel bumps. It's better to re-add them. All configs are automatically refreshed by 'make kernel_oldconfig CONFIG_TARGET=taget' and 'make kernel_oldconfig CONFIG_TARGET=subtarget' Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-05-30 15:05:06 +08:00
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
Reference in New Issue Copy Permalink