diff --git a/package/base-files/files/bin/ipcalc.sh b/package/base-files/files/bin/ipcalc.sh index 827cb5dc2e..9b5e5accdc 100755 --- a/package/base-files/files/bin/ipcalc.sh +++ b/package/base-files/files/bin/ipcalc.sh @@ -34,19 +34,19 @@ function compl32(v) { BEGIN { slpos=index(ARGV[1],"/") - if (slpos == 0) { - ipaddr=ip2int(ARGV[1]) - dotpos=index(ARGV[2],".") - if (dotpos == 0) - netmask=compl32(2**(32-int(ARGV[2]))-1) - else - netmask=ip2int(ARGV[2]) - } else { - ipaddr=ip2int(substr(ARGV[1],0,slpos-1)) - netmask=compl32(2**(32-int(substr(ARGV[1],slpos+1)))-1) + if (slpos != 0) { + # rearrange arguments to not use compound notation ARGV[4]=ARGV[3] ARGV[3]=ARGV[2] + ARGV[2]=substr(ARGV[1],slpos+1) + ARGV[1]=substr(ARGV[1],0,slpos-1) } + ipaddr=ip2int(ARGV[1]) + dotpos=index(ARGV[2],".") + if (dotpos == 0) + netmask=compl32(2**(32-int(ARGV[2]))-1) + else + netmask=ip2int(ARGV[2]) network=and(ipaddr,netmask) prefix=32-bitcount(compl32(netmask)) diff --git a/package/boot/uboot-mediatek/patches/430-add-bpi-r3.patch b/package/boot/uboot-mediatek/patches/430-add-bpi-r3.patch index 507a7dd04e..d499b0dcc6 100644 --- a/package/boot/uboot-mediatek/patches/430-add-bpi-r3.patch +++ b/package/boot/uboot-mediatek/patches/430-add-bpi-r3.patch @@ -870,7 +870,7 @@ +ubi_init_emmc_install=run sdmmc_read_emmc_install && run ubi_write_emmc_install +ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi +ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data -+ubi_write_emmc_install=ubi check emmc_install && ubi remote emmc_install ; ubi create emmc_install 0x800000 dynamic ; ubi write $loadaddr emmc_install 0x800000 ++ubi_write_emmc_install=ubi check emmc_install && ubi remove emmc_install ; ubi create emmc_install 0x800000 dynamic ; ubi write $loadaddr emmc_install 0x800000 +ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize +ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize +_init_env=setenv _init_env ; setenv _create_env ; saveenv ; saveenv diff --git a/package/network/services/hostapd/files/hostapd.uc b/package/network/services/hostapd/files/hostapd.uc index 593840cca8..750fd535a4 100644 --- a/package/network/services/hostapd/files/hostapd.uc +++ b/package/network/services/hostapd/files/hostapd.uc @@ -278,12 +278,12 @@ function iface_reload_config(phydev, config, old_config) return false; let iface = hostapd.interfaces[phy]; + let iface_name = old_config.bss[0].ifname; if (!iface) { hostapd.printf(`Could not find previous interface ${iface_name}`); return false; } - let iface_name = old_config.bss[0].ifname; let first_bss = hostapd.bss[iface_name]; if (!first_bss) { hostapd.printf(`Could not find bss of previous interface ${iface_name}`); diff --git a/target/linux/mediatek/dts/mt7981b-jcg-q30-ubootmod.dts b/target/linux/mediatek/dts/mt7981b-jcg-q30-ubootmod.dts index 04a93a096d..4bfd7ee27d 100644 --- a/target/linux/mediatek/dts/mt7981b-jcg-q30-ubootmod.dts +++ b/target/linux/mediatek/dts/mt7981b-jcg-q30-ubootmod.dts @@ -4,7 +4,7 @@ */ /dts-v1/; -#include "mt7981-jcg-q30.dts" +#include "mt7981b-jcg-q30.dts" / { model = "JCG Q30 (custom U-Boot layout)"; diff --git a/target/linux/ramips/dts/mt7621_dlink_covr-x1860-a1.dts b/target/linux/ramips/dts/mt7621_dlink_covr-x1860-a1.dts new file mode 100644 index 0000000000..c06c5e36ba --- /dev/null +++ b/target/linux/ramips/dts/mt7621_dlink_covr-x1860-a1.dts @@ -0,0 +1,186 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include +#include + +/ { + compatible = "dlink,covr-x1860-a1", "mediatek,mt7621-soc"; + model = "D-Link COVR-X1860 A1"; + + aliases { + led-boot = &status_orange; + led-failsafe = &status_red; + led-running = &status_white; + led-upgrade = &status_red; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "wps"; + linux,code = ; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + status_white: power { + label = "white:status"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + status_orange: status_orange { + label = "orange:status"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + status_red: status_red { + label = "red:status"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + }; + + virtual_flash { + compatible = "mtd-concat"; + + devices = <&fwconcat0 &fwconcat1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ubi"; + reg = <0x0 0x0>; + }; + }; + }; +}; + +&nand { + status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "config"; + reg = <0x80000 0x80000>; + read-only; + }; + + factory: partition@100000 { + label = "factory"; + reg = <0x100000 0x80000>; + read-only; + }; + + partition@180000 { + label = "config2"; + reg = <0x180000 0x40000>; + read-only; + }; + + partition@1c0000 { + label = "kernel"; + reg = <0x1c0000 0x800000>; + }; + + fwconcat0: partition@9c0000 { + label = "fwconcat0"; + reg = <0x9c0000 0x2000000>; + }; + + partition@29c0000 { + label = "kernel2"; + reg = <0x29c0000 0x800000>; + read-only; + }; + + fwconcat1: partition@31c0000 { + label = "fwconcat1"; + reg = <0x31c0000 0x2a00000>; + }; + + partition@5bc0000 { + label = "private"; + reg = <0x5bc0000 0x1400000>; + read-only; + }; + + partition@6fc0000 { + label = "mydlink"; + reg = <0x6fc0000 0x600000>; + read-only; + }; + + partition@75c0000 { + label = "myconfig"; + reg = <0x75c0000 0xa00000>; + read-only; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie1 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0>; + mediatek,disable-radar-background; + }; +}; + +&gmac1 { + status = "okay"; + phy-handle = <ðphy4>; +}; + +&mdio { + ethphy4: ethernet-phy@4 { + reg = <4>; + }; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "internet"; + }; + + port@2 { + status = "okay"; + label = "ethernet"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7628an_tplink_archer-c50-v6.dts b/target/linux/ramips/dts/mt7628an_tplink_archer-c50-v6.dts new file mode 100644 index 0000000000..86cefbc230 --- /dev/null +++ b/target/linux/ramips/dts/mt7628an_tplink_archer-c50-v6.dts @@ -0,0 +1,100 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7628an_tplink_8m-split-uboot.dtsi" + +/ { + compatible = "tplink,archer-c50-v6", "mediatek,mt7628an-soc"; + model = "TP-Link Archer C50 v6 (CA/EU/RU)"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 38 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + rfkill { + label = "rfkill"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "green:power"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + + wlan2 { + label = "green:wlan2g"; + gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + }; + + wlan5 { + label = "green:wlan5g"; + gpios = <&gpio 42 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "green:lan"; + gpios = <&gpio 41 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "green:wan"; + gpios = <&gpio 39 GPIO_ACTIVE_LOW>; + }; + + wan_orange { + label = "orange:wan"; + gpios = <&gpio 40 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&ehci { + status = "disabled"; +}; + +&ohci { + status = "disabled"; +}; + +&state_default { + gpio { + groups = "i2c", "p0led_an", "p1led_an", "p2led_an", + "p3led_an", "p4led_an", "wdt", "wled_an"; + function = "gpio"; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <5000000 6000000>; + nvmem-cells = <&eeprom_radio_8000>, <&macaddr_rom_f100>; + nvmem-cell-names = "eeprom", "mac-address"; + mac-address-increment = <(-1)>; + }; +}; + +&eeprom_radio_8000 { + /* V2 has different eeprom size '0x4da8' for MT7613 */ + reg = <0x8000 0x4da8>; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index e1d7e881c2..89a80228d8 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -9,6 +9,14 @@ DEFAULT_SOC := mt7621 DEVICE_VARS += ELECOM_HWNAME LINKSYS_HWNAME DLINK_HWID +define Build/append-dlink-covr-metadata + echo -ne '{"supported_devices": "$(1)", "firmware": "' > $@metadata.tmp + $(MKHASH) md5 "$@" | head -c32 >> $@metadata.tmp + echo '"}' >> $@metadata.tmp + fwtool -I $@metadata.tmp $@ + rm $@metadata.tmp +endef + define Build/arcadyan-trx echo -ne "hsqs" > $@.hsqs $(eval trx_magic=$(word 1,$(1))) @@ -642,16 +650,39 @@ define Device/cudy_x6-v2 endef TARGET_DEVICES += cudy_x6-v2 +define Device/dlink_covr-x1860-a1 + $(Device/dsa-migration) + BLOCKSIZE := 128k + PAGESIZE := 2048 + KERNEL_SIZE := 8192k + IMAGE_SIZE := 40960k + DEVICE_VENDOR := D-Link + DEVICE_MODEL := COVR-X1860 + DEVICE_VARIANT := A1 + DEVICE_PACKAGES := kmod-mt7915-firmware + UBINIZE_OPTS := -E 5 + KERNEL_LOADADDR := 0x82000000 + KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \ + fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \ + append-squashfs4-fakeroot + IMAGES += factory.bin recovery.bin + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + IMAGE/recovery.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \ + append-ubi | check-size + IMAGE/factory.bin := $$(IMAGE/recovery.bin) | \ + append-dlink-covr-metadata $$(DEVICE_MODEL) | \ + dlink-sge-image $$(DEVICE_MODEL) +endef +TARGET_DEVICES += dlink_covr-x1860-a1 + define Device/dlink_dxx-1xx0-x1 DEVICE_VENDOR := D-Link - DEVICE_PACKAGES := kmod-mt7615-firmware rssileds + DEVICE_PACKAGES := kmod-mt7615-firmware rssileds -uboot-envtools IMAGE_SIZE := 16064k IMAGES += factory.bin - IMAGE/factory.bin := $$(sysupgrade_bin) | \ - check-size 11009992 | pad-to 11009992 | \ - append-md5sum-ascii-salted ffff | \ - append-string $$(DLINK_HWID) | \ - check-size + IMAGE/factory.bin := append-kernel | append-rootfs | \ + pad-rootfs -x 60 | append-md5sum-ascii-salted ffff | \ + append-string $$$$(DLINK_HWID) | check-size endef define Device/dlink_dap-1620-b1 diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index cf9743ffee..be7a0e61d2 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -596,6 +596,19 @@ define Device/tplink_archer-c50-v4 endef TARGET_DEVICES += tplink_archer-c50-v4 +define Device/tplink_archer-c50-v6 + $(Device/tplink-v2) + IMAGE_SIZE := 7616k + DEVICE_MODEL := Archer C50 + DEVICE_VARIANT := v6 (CA/EU/RU) + TPLINK_FLASHLAYOUT := 8MSUmtk + TPLINK_HWID := 0x0C500006 + TPLINK_HWREVADD := 0x6 + DEVICE_PACKAGES := kmod-mt7615e kmod-mt7663-firmware-ap + IMAGES := sysupgrade.bin +endef +TARGET_DEVICES += tplink_archer-c50-v6 + define Device/tplink_re200-v2 $(Device/tplink-safeloader) IMAGE_SIZE := 7808k diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index c0086bb6d2..d53a6f3dbe 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -100,6 +100,9 @@ ramips_setup_interfaces() zyxel,nr7101) ucidef_set_interfaces_lan_wan "lan" "wan" ;; + dlink,covr-x1860-a1) + ucidef_set_interfaces_lan_wan "ethernet" "internet" + ;; gnubee,gb-pc1) ucidef_set_interface_lan "ethblack ethblue" ;; @@ -221,6 +224,11 @@ ramips_setup_macs() label_mac=$lan_mac wan_mac=$(macaddr_add "$lan_mac" 1) ;; + dlink,covr-x1860-a1) + label_mac=$(mtd_get_mac_ascii config2 factory_mac) + wan_mac=$(macaddr_add "$label_mac" 3) + lan_mac=$label_mac + ;; dlink,dir-860l-b1) lan_mac=$(mtd_get_mac_ascii factory lanmac) wan_mac=$(mtd_get_mac_ascii factory wanmac) diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index 96b49ff00a..b6cf9052df 100644 --- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -46,6 +46,13 @@ case "$board" in [ "$PHYNBR" = "1" ] && \ macaddr_add $lan_mac_addr 2 > /sys${DEVPATH}/macaddress ;; + dlink,covr-x1860-a1) + label_mac=$(mtd_get_mac_ascii config2 factory_mac) + [ "$PHYNBR" = "0" ] && \ + macaddr_add $label_mac 1 > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "1" ] && \ + macaddr_add $label_mac 2 > /sys${DEVPATH}/macaddress + ;; dlink,dap-x1860-a1) hw_mac_addr="$(mtd_get_mac_binary factory 0x4)" [ "$PHYNBR" = "0" ] && \ diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index bd178bdc03..f61961fee7 100755 --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -63,6 +63,7 @@ platform_do_upgrade() { beeline,smartbox-turbo|\ beeline,smartbox-turbo-plus|\ belkin,rt1800|\ + dlink,covr-x1860-a1|\ dlink,dap-x1860-a1|\ dlink,dir-1960-a1|\ dlink,dir-2640-a1|\ diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds index 792bd13ebc..0b109feb6c 100644 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds @@ -76,7 +76,8 @@ tplink,tl-wr850n-v2) ucidef_set_led_switch "wan" "wan" "green:wan" "switch0" "0x01" ;; tplink,archer-c50-v3|\ -tplink,archer-c50-v4) +tplink,archer-c50-v4|\ +tplink,archer-c50-v6) ucidef_set_led_switch "lan" "lan" "green:lan" "switch0" "0x1e" ucidef_set_led_switch "wan" "wan" "green:wan" "switch0" "0x01" ucidef_set_led_wlan "wlan2g" "wlan2g" "green:wlan2g" "phy0tpt" diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index 6bcdea971b..2ec41fe254 100644 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -46,6 +46,7 @@ ramips_setup_interfaces() tplink,archer-c20-v5|\ tplink,archer-c50-v3|\ tplink,archer-c50-v4|\ + tplink,archer-c50-v6|\ tplink,tl-mr3420-v5|\ tplink,tl-wr840n-v4|\ tplink,tl-wr840n-v5|\ @@ -294,7 +295,8 @@ ramips_setup_macs() wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0xf100)" 1) ;; tplink,archer-c20-v5|\ - tplink,archer-c50-v4) + tplink,archer-c50-v4|\ + tplink,archer-c50-v6) wan_mac=$(macaddr_add "$(mtd_get_mac_binary rom 0xf100)" 1) ;; wavlink,wl-wn570ha1|\ diff --git a/target/linux/ramips/mt76x8/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt76x8/base-files/lib/upgrade/platform.sh index 20adfafc3d..427de8406f 100755 --- a/target/linux/ramips/mt76x8/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt76x8/base-files/lib/upgrade/platform.sh @@ -29,7 +29,8 @@ platform_do_upgrade() { default_do_upgrade "$1" ;; tplink,archer-c20-v5|\ - tplink,archer-c50-v4) + tplink,archer-c50-v4|\ + tplink,archer-c50-v6) MTD_ARGS="-t romfile" default_do_upgrade "$1" ;;