diff --git a/package/boot/uboot-sunxi/Makefile b/package/boot/uboot-sunxi/Makefile index 116c91848f..f02f6b4c94 100644 --- a/package/boot/uboot-sunxi/Makefile +++ b/package/boot/uboot-sunxi/Makefile @@ -156,6 +156,14 @@ define U-Boot/nanopi_r1 BUILD_DEVICES:=friendlyarm_nanopi-r1 endef +define U-Boot/nanopi_r1s_h5 + BUILD_SUBTARGET:=cortexa53 + NAME:=U-Boot for NanoPi R1S (H5) + BUILD_DEVICES:=friendlyarm_nanopi-r1s-h5 + DEPENDS:=+PACKAGE_u-boot-nanopi_r1s_h5:arm-trusted-firmware-sunxi + UENV:=a64 +endef + define U-Boot/orangepi_r1 BUILD_SUBTARGET:=cortexa7 NAME:=Orange Pi R1 (H2+) @@ -290,6 +298,7 @@ UBOOT_TARGETS := \ nanopi_neo_plus2 \ nanopi_neo2 \ nanopi_r1 \ + nanopi_r1s_h5 \ orangepi_zero \ orangepi_r1 \ orangepi_one \ diff --git a/package/boot/uboot-sunxi/patches/252-sunxi-h5-add-support-for-nanopi-r1s-h5.patch b/package/boot/uboot-sunxi/patches/252-sunxi-h5-add-support-for-nanopi-r1s-h5.patch new file mode 100644 index 0000000000..59be3208a4 --- /dev/null +++ b/package/boot/uboot-sunxi/patches/252-sunxi-h5-add-support-for-nanopi-r1s-h5.patch @@ -0,0 +1,233 @@ +--- a/arch/arm/dts/Makefile ++++ b/arch/arm/dts/Makefile +@@ -400,6 +400,7 @@ dtb-$(CONFIG_MACH_SUN8I_V3S) += \ + sun50i-h5-libretech-all-h3-cc.dtb \ + sun50i-h5-nanopi-neo2.dtb \ + sun50i-h5-nanopi-neo-plus2.dtb \ ++ sun50i-h5-nanopi-r1s-h5.dtb \ + sun50i-h5-orangepi-zero-plus.dtb \ + sun50i-h5-orangepi-pc2.dtb \ + sun50i-h5-orangepi-prime.dtb \ +--- /dev/null ++++ b/arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts +@@ -0,0 +1,204 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright (C) 2021 AmadeusGhost ++ * ++ * Based on sun50i-h5-nanopi-neo2.dts, which is: ++ * Copyright (C) 2017 Icenowy Zheng ++ */ ++ ++/dts-v1/; ++#include "sun50i-h5.dtsi" ++ ++#include ++#include ++ ++/ { ++ model = "FriendlyARM NanoPi R1S H5"; ++ compatible = "friendlyarm,nanopi-r1s-h5", "allwinner,sun50i-h5"; ++ ++ aliases { ++ ethernet0 = &emac; ++ i2c0 = &i2c0; ++ serial0 = &uart0; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ sys { ++ label = "nanopi:red:sys"; ++ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ wan { ++ label = "nanopi:green:wan"; ++ gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ lan { ++ label = "nanopi:green:lan"; ++ gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++ ++ r-gpio-keys { ++ compatible = "gpio-keys"; ++ ++ reset { ++ label = "reset"; ++ linux,code = ; ++ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ reg_gmac_3v3: gmac-3v3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "gmac-3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ startup-delay-us = <100000>; ++ enable-active-high; ++ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ reg_vcc3v3: vcc3v3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ ++ reg_usb0_vbus: usb0-vbus { ++ compatible = "regulator-fixed"; ++ regulator-name = "usb0-vbus"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ enable-active-high; ++ gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ ++ status = "okay"; ++ }; ++ ++ vdd_cpux: gpio-regulator { ++ compatible = "regulator-gpio"; ++ regulator-name = "vdd-cpux"; ++ regulator-type = "voltage"; ++ regulator-boot-on; ++ regulator-always-on; ++ regulator-min-microvolt = <1100000>; ++ regulator-max-microvolt = <1300000>; ++ regulator-ramp-delay = <50>; /* 4ms */ ++ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; ++ gpios-states = <0x1>; ++ states = <1100000 0x0>, <1300000 0x1>; ++ }; ++ ++ wifi_pwrseq: wifi_pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ ++ post-power-on-delay-ms = <200>; ++ }; ++}; ++ ++&cpu0 { ++ cpu-supply = <&vdd_cpux>; ++}; ++ ++&ehci0 { ++ status = "okay"; ++}; ++ ++&ehci1 { ++ status = "okay"; ++}; ++ ++&ehci2 { ++ status = "okay"; ++}; ++ ++&ehci3 { ++ status = "okay"; ++}; ++ ++&emac { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&emac_rgmii_pins>; ++ phy-supply = <®_gmac_3v3>; ++ phy-handle = <&ext_rgmii_phy>; ++ phy-mode = "rgmii"; ++ status = "okay"; ++}; ++ ++&external_mdio { ++ ext_rgmii_phy: ethernet-phy@7 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <7>; ++ }; ++}; ++ ++&i2c0 { ++ status = "okay"; ++ ++ eeprom@51 { ++ compatible = "microchip,24c02"; ++ reg = <0x51>; ++ pagesize = <16>; ++ }; ++}; ++ ++&mmc0 { ++ vmmc-supply = <®_vcc3v3>; ++ bus-width = <4>; ++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ ++ status = "okay"; ++}; ++ ++&mmc1 { ++ vmmc-supply = <®_vcc3v3>; ++ vqmmc-supply = <®_vcc3v3>; ++ mmc-pwrseq = <&wifi_pwrseq>; ++ bus-width = <4>; ++ non-removable; ++ status = "okay"; ++ ++ rtl8189etv: sdio_wifi@1 { ++ reg = <1>; ++ }; ++}; ++ ++&ohci0 { ++ status = "okay"; ++}; ++ ++&ohci1 { ++ status = "okay"; ++}; ++ ++&ohci2 { ++ status = "okay"; ++}; ++ ++&ohci3 { ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins_a>; ++ status = "okay"; ++}; ++ ++&usb_otg { ++ dr_mode = "peripheral"; ++ status = "okay"; ++}; ++ ++&usbphy { ++ /* USB Type-A port's VBUS is always on */ ++ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ ++ usb0_vbus-supply = <®_usb0_vbus>; ++ status = "okay"; ++}; +--- /dev/null ++++ b/configs/nanopi_r1s_h5_defconfig +@@ -0,0 +1,13 @@ ++CONFIG_ARM=y ++CONFIG_ARCH_SUNXI=y ++CONFIG_SPL=y ++CONFIG_MACH_SUN50I_H5=y ++CONFIG_DRAM_CLK=672 ++CONFIG_DRAM_ZQ=3881977 ++# CONFIG_DRAM_ODT_EN is not set ++CONFIG_MMC_SUNXI_SLOT_EXTRA=2 ++# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set ++CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y ++CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-nanopi-r1s-h5" ++CONFIG_SUN8I_EMAC=y ++CONFIG_USB_EHCI_HCD=y diff --git a/target/linux/sunxi/base-files/etc/board.d/01_leds b/target/linux/sunxi/base-files/etc/board.d/01_leds index 514b8d1796..e3928b3b9b 100755 --- a/target/linux/sunxi/base-files/etc/board.d/01_leds +++ b/target/linux/sunxi/base-files/etc/board.d/01_leds @@ -9,7 +9,8 @@ boardname="${board##*,}" board_config_update case $board in -friendlyarm,nanopi-r1) +friendlyarm,nanopi-r1|\ +friendlyarm,nanopi-r1s-h5) ucidef_set_led_netdev "wan" "WAN" "nanopi:green:wan" "eth0" ucidef_set_led_netdev "lan" "LAN" "nanopi:green:lan" "eth1" ;; diff --git a/target/linux/sunxi/base-files/etc/board.d/02_network b/target/linux/sunxi/base-files/etc/board.d/02_network index 08d31caadc..c63011b799 100755 --- a/target/linux/sunxi/base-files/etc/board.d/02_network +++ b/target/linux/sunxi/base-files/etc/board.d/02_network @@ -8,7 +8,8 @@ board_config_update case $(board_name) in -friendlyarm,nanopi-r1) +friendlyarm,nanopi-r1|\ +friendlyarm,nanopi-r1s-h5) ucidef_set_interfaces_lan_wan "eth1" "eth0" ;; lamobo,lamobo-r1) diff --git a/target/linux/sunxi/image/cortex-a53.mk b/target/linux/sunxi/image/cortex-a53.mk index eeaaa887d7..2b2933aa63 100644 --- a/target/linux/sunxi/image/cortex-a53.mk +++ b/target/linux/sunxi/image/cortex-a53.mk @@ -28,6 +28,19 @@ define Device/friendlyarm_nanopi-neo2 endef TARGET_DEVICES += friendlyarm_nanopi-neo2 +define Device/friendlyarm_nanopi-r1s-h5 + DEVICE_VENDOR := FriendlyARM + DEVICE_MODEL:=Nanopi R1S H5 + DEVICE_PACKAGES:= kmod-eeprom-at24 kmod-leds-gpio kmod-rtl8189es \ + kmod-usb2 kmod-usb-net kmod-usb-net-rtl8152 wpad-basic + SUPPORTED_DEVICES:=nanopi-r1s-h5 + SUNXI_DTS_DIR := allwinner/ + SOC := sun50i-h5 + KERNEL_NAME := Image + KERNEL := kernel-bin +endef +TARGET_DEVICES += friendlyarm_nanopi-r1s-h5 + define Device/pine64_pine64-plus DEVICE_VENDOR := Pine64 DEVICE_MODEL := Pine64+ diff --git a/target/linux/sunxi/patches-4.19/021-dt-bindings-net-add-RTL8152-binding-documentation.patch b/target/linux/sunxi/patches-4.19/021-dt-bindings-net-add-RTL8152-binding-documentation.patch new file mode 100644 index 0000000000..2d99c49404 --- /dev/null +++ b/target/linux/sunxi/patches-4.19/021-dt-bindings-net-add-RTL8152-binding-documentation.patch @@ -0,0 +1,53 @@ +From 3ee05f4aa64fc86af3be5bc176ba5808de9260a7 Mon Sep 17 00:00:00 2001 +From: David Bauer +Date: Sun, 26 Jul 2020 15:30:33 +0200 +Subject: [PATCH] dt-bindings: net: add RTL8152 binding documentation + +Add binding documentation for the Realtek RTL8152 / RTL8153 USB ethernet +adapters. + +Signed-off-by: David Bauer +--- + .../bindings/net/realtek,rtl8152.yaml | 36 +++++++++++++++++++ + 1 file changed, 36 insertions(+) + create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl8152.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/net/realtek,rtl8152.yaml +@@ -0,0 +1,36 @@ ++# SPDX-License-Identifier: GPL-2.0 ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/net/realtek,rtl8152.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Realtek RTL8152/RTL8153 series USB ethernet ++ ++maintainers: ++ - David Bauer ++ ++properties: ++ compatible: ++ oneOf: ++ - items: ++ - enum: ++ - realtek,rtl8152 ++ - realtek,rtl8153 ++ ++ reg: ++ description: The device number on the USB bus ++ ++ realtek,led-data: ++ description: Value to be written to the LED configuration register. ++ ++required: ++ - compatible ++ - reg ++ ++examples: ++ - | ++ usb-eth@2 { ++ compatible = "realtek,rtl8153"; ++ reg = <2>; ++ realtek,led-data = <0x87>; ++ }; diff --git a/target/linux/sunxi/patches-4.19/022-net-usb-r8152-add-LED-configuration-from-OF.patch b/target/linux/sunxi/patches-4.19/022-net-usb-r8152-add-LED-configuration-from-OF.patch new file mode 100644 index 0000000000..c595508c97 --- /dev/null +++ b/target/linux/sunxi/patches-4.19/022-net-usb-r8152-add-LED-configuration-from-OF.patch @@ -0,0 +1,74 @@ +From 82985725e071f2a5735052f18e109a32aeac3a0b Mon Sep 17 00:00:00 2001 +From: David Bauer +Date: Sun, 26 Jul 2020 02:38:31 +0200 +Subject: [PATCH] net: usb: r8152: add LED configuration from OF + +This adds the ability to configure the LED configuration register using +OF. This way, the correct value for board specific LED configuration can +be determined. + +Signed-off-by: David Bauer +--- + drivers/net/usb/r8152.c | 23 +++++++++++++++++++++++ + 1 file changed, 23 insertions(+) + +--- a/drivers/net/usb/r8152.c ++++ b/drivers/net/usb/r8152.c +@@ -15,6 +15,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -4006,6 +4007,22 @@ static void rtl_tally_reset(struct r8152 + ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data); + } + ++static int r8152_led_configuration(struct r8152 *tp) ++{ ++ u32 led_data; ++ int ret; ++ ++ ret = of_property_read_u32(tp->udev->dev.of_node, "realtek,led-data", ++ &led_data); ++ ++ if (ret) ++ return ret; ++ ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_LEDSEL, led_data); ++ ++ return 0; ++} ++ + static void r8152b_init(struct r8152 *tp) + { + u32 ocp_data; +@@ -4047,6 +4064,8 @@ static void r8152b_init(struct r8152 *tp + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); + ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN); + ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); ++ ++ r8152_led_configuration(tp); + } + + static void r8153_init(struct r8152 *tp) +@@ -4168,6 +4187,8 @@ static void r8153_init(struct r8152 *tp) + tp->coalesce = COALESCE_SLOW; + break; + } ++ ++ r8152_led_configuration(tp); + } + + static void r8153b_init(struct r8152 *tp) +@@ -4231,6 +4252,8 @@ static void r8153b_init(struct r8152 *tp + rtl_tally_reset(tp); + + tp->coalesce = 15000; /* 15 us */ ++ ++ r8152_led_configuration(tp); + } + + static int rtl8152_pre_reset(struct usb_interface *intf) diff --git a/target/linux/sunxi/patches-4.19/103-sunxi-h5-add-support-for-nanopi-r1s-h5.patch b/target/linux/sunxi/patches-4.19/103-sunxi-h5-add-support-for-nanopi-r1s-h5.patch new file mode 100644 index 0000000000..c89c040605 --- /dev/null +++ b/target/linux/sunxi/patches-4.19/103-sunxi-h5-add-support-for-nanopi-r1s-h5.patch @@ -0,0 +1,229 @@ +--- a/arch/arm64/boot/dts/allwinner/Makefile ++++ b/arch/arm64/boot/dts/allwinner/Makefile +@@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-or + dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb + dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb + dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb ++dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-r1s-h5.dtb + dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb + dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb + dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb +--- /dev/null ++++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts +@@ -0,0 +1,216 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright (C) 2021 AmadeusGhost ++ * ++ * Based on sun50i-h5-nanopi-neo2.dts, which is: ++ * Copyright (C) 2017 Icenowy Zheng ++ */ ++ ++/dts-v1/; ++#include "sun50i-h5.dtsi" ++ ++#include ++#include ++ ++/ { ++ model = "FriendlyARM NanoPi R1S H5"; ++ compatible = "friendlyarm,nanopi-r1s-h5", "allwinner,sun50i-h5"; ++ ++ aliases { ++ ethernet0 = &emac; ++ i2c0 = &i2c0; ++ serial0 = &uart0; ++ ++ led-boot = &led_sys; ++ led-failsafe = &led_sys; ++ led-running = &led_sys; ++ led-upgrade = &led_sys; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ led_sys: sys { ++ label = "nanopi:red:sys"; ++ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ wan { ++ label = "nanopi:green:wan"; ++ gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ lan { ++ label = "nanopi:green:lan"; ++ gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++ ++ r-gpio-keys { ++ compatible = "gpio-keys"; ++ ++ reset { ++ label = "reset"; ++ linux,code = ; ++ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ reg_gmac_3v3: gmac-3v3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "gmac-3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ startup-delay-us = <100000>; ++ enable-active-high; ++ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ reg_vcc3v3: vcc3v3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ ++ reg_usb0_vbus: usb0-vbus { ++ compatible = "regulator-fixed"; ++ regulator-name = "usb0-vbus"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ enable-active-high; ++ gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ ++ status = "okay"; ++ }; ++ ++ vdd_cpux: gpio-regulator { ++ compatible = "regulator-gpio"; ++ regulator-name = "vdd-cpux"; ++ regulator-type = "voltage"; ++ regulator-boot-on; ++ regulator-always-on; ++ regulator-min-microvolt = <1100000>; ++ regulator-max-microvolt = <1300000>; ++ regulator-ramp-delay = <50>; /* 4ms */ ++ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; ++ gpios-states = <0x1>; ++ states = <1100000 0x0>, <1300000 0x1>; ++ }; ++ ++ wifi_pwrseq: wifi_pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ ++ post-power-on-delay-ms = <200>; ++ }; ++}; ++ ++&cpu0 { ++ cpu-supply = <&vdd_cpux>; ++}; ++ ++&ehci0 { ++ status = "okay"; ++}; ++ ++&ehci1 { ++ status = "okay"; ++ ++ usb-eth@1 { ++ compatible = "realtek,rtl8153"; ++ reg = <1>; ++ ++ realtek,led-data = <0x87>; ++ }; ++}; ++ ++&ehci2 { ++ status = "okay"; ++}; ++ ++&ehci3 { ++ status = "okay"; ++}; ++ ++&emac { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&emac_rgmii_pins>; ++ phy-supply = <®_gmac_3v3>; ++ phy-handle = <&ext_rgmii_phy>; ++ phy-mode = "rgmii"; ++ status = "okay"; ++}; ++ ++&external_mdio { ++ ext_rgmii_phy: ethernet-phy@7 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <7>; ++ }; ++}; ++ ++&i2c0 { ++ status = "okay"; ++ ++ eeprom@51 { ++ compatible = "microchip,24c02"; ++ reg = <0x51>; ++ pagesize = <16>; ++ }; ++}; ++ ++&mmc0 { ++ vmmc-supply = <®_vcc3v3>; ++ bus-width = <4>; ++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ ++ status = "okay"; ++}; ++ ++&mmc1 { ++ vmmc-supply = <®_vcc3v3>; ++ vqmmc-supply = <®_vcc3v3>; ++ mmc-pwrseq = <&wifi_pwrseq>; ++ bus-width = <4>; ++ non-removable; ++ status = "okay"; ++ ++ rtl8189etv: sdio_wifi@1 { ++ reg = <1>; ++ }; ++}; ++ ++&ohci0 { ++ status = "okay"; ++}; ++ ++&ohci1 { ++ status = "okay"; ++}; ++ ++&ohci2 { ++ status = "okay"; ++}; ++ ++&ohci3 { ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins_a>; ++ status = "okay"; ++}; ++ ++&usb_otg { ++ dr_mode = "peripheral"; ++ status = "okay"; ++}; ++ ++&usbphy { ++ /* USB Type-A port's VBUS is always on */ ++ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ ++ usb0_vbus-supply = <®_usb0_vbus>; ++ status = "okay"; ++};