From 0ff2385a92c0a31769fce954b7bd571d6114dbc8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=E5=8D=97=E6=B5=A6=E6=9C=88?= Date: Thu, 19 Sep 2019 17:41:01 +0800 Subject: [PATCH 1/9] ar71xx: fix tl-wdr3320-v2 upgrade MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the error that tl-wdr3320-v2 can't upgrade firmware via web interface by using magic_ver="0200" for this device. Signed-off-by: 南浦月 [commit message facelift] Signed-off-by: Adrian Schmutzler --- target/linux/ar71xx/base-files/lib/upgrade/platform.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index d5570fdf18..a76842bdde 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -499,7 +499,7 @@ platform_check_image() { local magic_ver="0100" case "$board" in - tl-wdr6500-v2) + tl-wdr3320-v2|tl-wdr6500-v2) magic_ver="0200" ;; esac From 0cbd2c74d0c9f41d07757907226e5cfeaf16e06a Mon Sep 17 00:00:00 2001 From: Frederik Noe-Sdun Date: Mon, 29 Jul 2019 20:23:28 +0200 Subject: [PATCH 2/9] ramips: add support for Netgear EX6130 Specifications: * SoC: MT7620A * RAM: 64 MB DDR * Flash: 8MB NOR SPI flash * WiFi: MT7612E (5Ghz) and builtin MT7620A (2.4GHz) * LAN: 1x100M The -factory images can be flashed from the device's web interface or via nmrpflash. The device seems to use base PCB as EX3700/EX3800, but supporting AC1200 using MT7612E. MAC adresses: 5.0 GHz 0x8004 *:9a 2.4 GHz 0x4 *:9b lan 0x28 *:9b wan 0x2e *:9c Since this is a one-port device, although wan MAC address is set in flash, it is not used in OpenWrt setup. Signed-off-by: Frederik Noe-Sdun [rebased, extended commit message, tiny DTS style fixes] Signed-off-by: Adrian Schmutzler --- .../ramips/dts/mt7620a_netgear_ex3700.dts | 114 +---------------- .../dts/mt7620a_netgear_ex3700_ex6130.dtsi | 115 ++++++++++++++++++ .../ramips/dts/mt7620a_netgear_ex6130.dts | 57 +++++++++ target/linux/ramips/image/mt7620.mk | 13 ++ .../mt7620/base-files/etc/board.d/01_leds | 3 +- .../mt7620/base-files/etc/board.d/02_network | 1 + 6 files changed, 189 insertions(+), 114 deletions(-) create mode 100644 target/linux/ramips/dts/mt7620a_netgear_ex3700_ex6130.dtsi create mode 100644 target/linux/ramips/dts/mt7620a_netgear_ex6130.dts diff --git a/target/linux/ramips/dts/mt7620a_netgear_ex3700.dts b/target/linux/ramips/dts/mt7620a_netgear_ex3700.dts index 311f27781d..f657e926cb 100644 --- a/target/linux/ramips/dts/mt7620a_netgear_ex3700.dts +++ b/target/linux/ramips/dts/mt7620a_netgear_ex3700.dts @@ -2,10 +2,7 @@ /dts-v1/; -#include -#include - -#include "mt7620a.dtsi" +#include "mt7620a_netgear_ex3700_ex6130.dtsi" / { compatible = "netgear,ex3700", "ralink,mt7620a-soc"; @@ -18,10 +15,6 @@ led-upgrade = &led_power_green; }; - chosen { - bootargs = "console=ttyS0,57600"; - }; - leds { compatible = "gpio-leds"; @@ -61,109 +54,4 @@ gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; }; }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "config"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x790000>; - }; - - partition@7e0000 { - label = "board_data"; - reg = <0x7e0000 0x10000>; - read-only; - }; - - partition@7f0000 { - label = "nvram"; - reg = <0x7f0000 0x10000>; - read-only; - }; - }; - }; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - mt76@0,0 { - reg = <0x0000 0 0 0 0 >; - mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - }; -}; - -ðernet { - mtd-mac-address = <&factory 0x28>; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0x0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "rgmii2", "spi refclk"; - ralink,function = "gpio"; - }; - }; }; diff --git a/target/linux/ramips/dts/mt7620a_netgear_ex3700_ex6130.dtsi b/target/linux/ramips/dts/mt7620a_netgear_ex3700_ex6130.dtsi new file mode 100644 index 0000000000..a2d44e8941 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_netgear_ex3700_ex6130.dtsi @@ -0,0 +1,115 @@ +#include +#include + +#include "mt7620a.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,57600"; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "config"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x790000>; + }; + + partition@7e0000 { + label = "board_data"; + reg = <0x7e0000 0x10000>; + read-only; + }; + + partition@7f0000 { + label = "nvram"; + reg = <0x7f0000 0x10000>; + read-only; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x28>; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0x0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "rgmii2", "spi refclk"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_netgear_ex6130.dts b/target/linux/ramips/dts/mt7620a_netgear_ex6130.dts new file mode 100644 index 0000000000..68dd3f65d3 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_netgear_ex6130.dts @@ -0,0 +1,57 @@ +/* This file is released into the public domain */ + +/dts-v1/; + +#include "mt7620a_netgear_ex3700_ex6130.dtsi" + +/ { + compatible = "netgear,ex6130", "ralink,mt7620a-soc"; + model = "Netgear EX6130"; + + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + + leds { + compatible = "gpio-leds"; + + led_power_green: power_g { + label = "ex6130:green:power"; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + power_a { + label = "ex6130:amber:power"; + gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + }; + + router_g { + label = "ex6130:green:router"; + gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; + }; + + router_r { + label = "ex6130:red:router"; + gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + }; + + device_g { + label = "ex6130:green:device"; + gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + }; + + device_r { + label = "ex6130:red:device"; + gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "ex6130:green:wps"; + gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index 88437a6904..d3de3074b2 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -612,6 +612,19 @@ define Device/netgear_ex3700 endef TARGET_DEVICES += netgear_ex3700 +define Device/netgear_ex6130 + MTK_SOC := mt7620a + NETGEAR_BOARD_ID := U12H319T50_NETGEAR + BLOCKSIZE := 4k + IMAGE_SIZE := 7744k + IMAGES += factory.chk + IMAGE/factory.chk := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | netgear-chk + DEVICE_PACKAGES := kmod-mt76x2 + DEVICE_VENDOR := NETGEAR + DEVICE_MODEL := EX6130 +endef +TARGET_DEVICES += netgear_ex6130 + define Device/netgear_wn3000rp-v3 MTK_SOC := mt7620a IMAGE_SIZE := 7872k diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds index 6d6dcde6af..59f0fe8dab 100755 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds @@ -155,7 +155,8 @@ netgear,ex2700|\ netgear,wn3000rp-v3) set_wifi_led "$boardname:green:router" ;; -netgear,ex3700) +netgear,ex3700|\ +netgear,ex6130) ucidef_set_led_netdev "wlan5g" "ROUTER (green)" "$boardname:green:router" "wlan0" ucidef_set_led_netdev "wlan2g" "DEVICE (green)" "$boardname:green:device" "wlan1" ;; diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network index 94600bb437..dfca48e123 100755 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network @@ -39,6 +39,7 @@ ramips_setup_interfaces() kimax,u25awf-h1|\ netgear,ex2700|\ netgear,ex3700|\ + netgear,ex6130|\ netgear,wn3000rp-v3|\ planex,cs-qr10|\ planex,mzk-ex300np|\ From 4a904b8b76289eb00890bfb49c4e945fdc677b06 Mon Sep 17 00:00:00 2001 From: Frederik Noe-Sdun Date: Fri, 9 Aug 2019 06:42:25 +0200 Subject: [PATCH 3/9] ramips: increase max SPI frequency to 50 MHz for EX3700/EX6130 Based on Macronix MX25L3205DM2I datasheet this is maximum supported speed. Signed-off-by: Frederik Noe-Sdun [rebased, improved commit title/message] Signed-off-by: Adrian Schmutzler --- target/linux/ramips/dts/mt7620a_netgear_ex3700_ex6130.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/linux/ramips/dts/mt7620a_netgear_ex3700_ex6130.dtsi b/target/linux/ramips/dts/mt7620a_netgear_ex3700_ex6130.dtsi index a2d44e8941..d8d74ffc30 100644 --- a/target/linux/ramips/dts/mt7620a_netgear_ex3700_ex6130.dtsi +++ b/target/linux/ramips/dts/mt7620a_netgear_ex3700_ex6130.dtsi @@ -39,7 +39,7 @@ m25p80@0 { compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <10000000>; + spi-max-frequency = <50000000>; partitions { compatible = "fixed-partitions"; From f098c612b6db2ee62f3bdcba4e24d481a2a537e8 Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Fri, 8 Nov 2019 17:51:44 +0100 Subject: [PATCH 4/9] ramips: create shared DTSI for Netgear EX2700 and WN3000RP v3 This moves shared code of the named devices into a common DTSI. Remove setting status="okay" for &gpio0 as it's not disabled in mt7620a.dtsi. Signed-off-by: Adrian Schmutzler --- .../ramips/dts/mt7620a_netgear_ex2700.dts | 109 ++++-------------- .../mt7620a_netgear_ex2700_wn3000rp-v3.dtsi | 64 ++++++++++ .../dts/mt7620a_netgear_wn3000rp-v3.dts | 105 ++++------------- 3 files changed, 110 insertions(+), 168 deletions(-) create mode 100755 target/linux/ramips/dts/mt7620a_netgear_ex2700_wn3000rp-v3.dtsi diff --git a/target/linux/ramips/dts/mt7620a_netgear_ex2700.dts b/target/linux/ramips/dts/mt7620a_netgear_ex2700.dts index 5db2a7ae9c..857f2ed220 100644 --- a/target/linux/ramips/dts/mt7620a_netgear_ex2700.dts +++ b/target/linux/ramips/dts/mt7620a_netgear_ex2700.dts @@ -10,10 +10,7 @@ /dts-v1/; -#include "mt7620a.dtsi" - -#include -#include +#include "mt7620a_netgear_ex2700_wn3000rp-v3.dtsi" / { compatible = "netgear,ex2700", "ralink,mt7620a-soc"; @@ -26,10 +23,6 @@ led-upgrade = &led_power_green; }; - chosen { - bootargs = "console=ttyS0,57600"; - }; - leds { compatible = "gpio-leds"; @@ -69,86 +62,30 @@ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; }; +}; - keys { - compatible = "gpio-keys"; +&partitions { + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; - wps { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio1 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - partition@40000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x40000 0x3b0000>; - }; - - art: partition@3f0000 { - label = "art"; - reg = <0x3f0000 0x10000>; - read-only; - }; - }; - }; -}; - -ðernet { - mtd-mac-address = <&art 0x0>; -}; - -&wmac { - mtd-mac-address = <&art 0x6>; - ralink,mtd-eeprom = <&art 0x1000>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "uartf", "spi refclk"; - ralink,function = "gpio"; - }; + partition@40000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x40000 0x3b0000>; + }; + + art: partition@3f0000 { + label = "art"; + reg = <0x3f0000 0x10000>; + read-only; }; }; diff --git a/target/linux/ramips/dts/mt7620a_netgear_ex2700_wn3000rp-v3.dtsi b/target/linux/ramips/dts/mt7620a_netgear_ex2700_wn3000rp-v3.dtsi new file mode 100755 index 0000000000..000c7535da --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_netgear_ex2700_wn3000rp-v3.dtsi @@ -0,0 +1,64 @@ +#include +#include + +#include "mt7620a.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,57600"; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions: partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; + }; +}; + +ðernet { + mtd-mac-address = <&art 0x0>; +}; + +&wmac { + ralink,mtd-eeprom = <&art 0x1000>; + mtd-mac-address = <&art 0x6>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "uartf", "spi refclk"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_netgear_wn3000rp-v3.dts b/target/linux/ramips/dts/mt7620a_netgear_wn3000rp-v3.dts index 66a5ad5ece..917db865a6 100644 --- a/target/linux/ramips/dts/mt7620a_netgear_wn3000rp-v3.dts +++ b/target/linux/ramips/dts/mt7620a_netgear_wn3000rp-v3.dts @@ -2,10 +2,7 @@ /dts-v1/; -#include "mt7620a.dtsi" - -#include -#include +#include "mt7620a_netgear_ex2700_wn3000rp-v3.dtsi" / { compatible = "netgear,wn3000rp-v3", "ralink,mt7620a-soc"; @@ -18,10 +15,6 @@ led-upgrade = &led_power_green; }; - chosen { - bootargs = "console=ttyS0,57600"; - }; - leds { compatible = "gpio-leds"; @@ -71,82 +64,30 @@ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; }; }; +}; - keys { - compatible = "gpio-keys"; +&partitions { + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; - wps { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - partition@40000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x40000 0x7b0000>; - }; - - art: partition@7f0000 { - label = "art"; - reg = <0x7f0000 0x10000>; - read-only; - }; - }; - }; -}; - -ðernet { - mtd-mac-address = <&art 0x0>; -}; - -&wmac { - mtd-mac-address = <&art 0x6>; - ralink,mtd-eeprom = <&art 0x1000>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "uartf", "spi refclk"; - ralink,function = "gpio"; - }; + partition@40000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x40000 0x7b0000>; + }; + + art: partition@7f0000 { + label = "art"; + reg = <0x7f0000 0x10000>; + read-only; }; }; From a43a40c49ed21bb3192575deb7a3701eabd9ff4b Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Fri, 8 Nov 2019 23:56:43 +0100 Subject: [PATCH 5/9] uci: update to latest to version 2019-11-08 fc417e8 build: Add -Wclobbered to detect problems with longjmp 2c8e4a3 util: Fix error path Signed-off-by: Hauke Mehrtens --- package/system/uci/Makefile | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/package/system/uci/Makefile b/package/system/uci/Makefile index 1a669c3ed1..d3169e01fa 100644 --- a/package/system/uci/Makefile +++ b/package/system/uci/Makefile @@ -13,9 +13,9 @@ PKG_RELEASE:=3 PKG_SOURCE_URL=$(PROJECT_GIT)/project/uci.git PKG_SOURCE_PROTO:=git -PKG_SOURCE_DATE=2019-09-01 -PKG_SOURCE_VERSION:=415f9e48436d29f612348f58f546b3ad8d74ac38 -PKG_MIRROR_HASH:=06f2801b103c359129c1675cbe5045c2cd04d756c2ab1efd2160608f34a27a8f +PKG_SOURCE_DATE=2019-11-08 +PKG_SOURCE_VERSION:=fc417e808087f96466d9ce18819e16476af9527b +PKG_MIRROR_HASH:=9d9f4756633e4b011ae68138793723c6443d0d81c7f626580881dc0cae77eceb PKG_LICENSE:=LGPL-2.1 PKG_LICENSE_FILES:= From 6596c95eca50ccdb3fa8098312b82cef59e40434 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sun, 27 Oct 2019 21:17:39 +0100 Subject: [PATCH 6/9] dnsmasq: Activate LTO This decreases the binary size when PIE ASLR is activated by 8% on MIPS BE. old: 202,020 /usr/sbin/dnsmasq new: 185,676 /usr/sbin/dnsmasq Signed-off-by: Hauke Mehrtens --- package/network/services/dnsmasq/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/package/network/services/dnsmasq/Makefile b/package/network/services/dnsmasq/Makefile index dc20ada292..a1b51896a9 100644 --- a/package/network/services/dnsmasq/Makefile +++ b/package/network/services/dnsmasq/Makefile @@ -126,8 +126,8 @@ endef Package/dnsmasq-dhcpv6/conffiles = $(Package/dnsmasq/conffiles) Package/dnsmasq-full/conffiles = $(Package/dnsmasq/conffiles) -TARGET_CFLAGS += -ffunction-sections -fdata-sections -TARGET_LDFLAGS += -Wl,--gc-sections +TARGET_CFLAGS += -flto +TARGET_LDFLAGS += -flto=jobserver COPTS = -DHAVE_UBUS \ $(if $(CONFIG_IPV6),,-DNO_IPV6) From 1eb34b7287ed97ad1e2ae60a436babbb5c68076f Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sun, 27 Oct 2019 22:32:59 +0100 Subject: [PATCH 7/9] mtd: Activate LTO compile option This decreases the size of the mtd application by 25% on MIPS BE. old: 20,597 /sbin/mtd new: 16,421 /sbin/mtd Signed-off-by: Hauke Mehrtens --- package/system/mtd/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/package/system/mtd/Makefile b/package/system/mtd/Makefile index 2347b8b723..166bb33281 100644 --- a/package/system/mtd/Makefile +++ b/package/system/mtd/Makefile @@ -36,7 +36,8 @@ endef target=$(firstword $(subst -, ,$(BOARD))) MAKE_FLAGS += TARGET="$(target)" -TARGET_CFLAGS := $(TARGET_CFLAGS) -Dtarget_$(target)=1 -Wall +TARGET_CFLAGS += -Dtarget_$(target)=1 -Wall -flto +TARGET_LDFLAGS += -flto=jobserver ifdef CONFIG_MTD_REDBOOT_PARTS MAKE_FLAGS += FIS_SUPPORT=1 From e926681387891fe9af89d884ebc3dce4c8c7f450 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sun, 27 Oct 2019 22:35:30 +0100 Subject: [PATCH 8/9] swconfig: Activate LTO compile option This decreases the size of the swconfig application by 25% on MIPS BE. old: 16,916 /sbin/swconfig new: 12,565 /sbin/swconfig Signed-off-by: Hauke Mehrtens --- package/network/config/swconfig/Makefile | 3 +++ 1 file changed, 3 insertions(+) diff --git a/package/network/config/swconfig/Makefile b/package/network/config/swconfig/Makefile index 8b1d6cd64a..4d3e572d82 100644 --- a/package/network/config/swconfig/Makefile +++ b/package/network/config/swconfig/Makefile @@ -23,6 +23,9 @@ define Package/swconfig TITLE:=Switch configuration utility endef +TARGET_CFLAGS += -flto +TARGET_LDFLAGS += -flto=jobserver + TARGET_CPPFLAGS := \ -D_GNU_SOURCE \ -I$(STAGING_DIR)/usr/include/libnl-tiny \ From 6ffd8a8f92ab5337ab967ab2922d7de7f0480bc9 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sun, 27 Oct 2019 22:38:53 +0100 Subject: [PATCH 9/9] usign: Activate LTO compile option This decreases the size of the usign application by 16% on MIPS BE. old: 24,597 /usr/bin/usign new: 20,501 /usr/bin/usign Signed-off-by: Hauke Mehrtens --- package/system/usign/Makefile | 3 +++ 1 file changed, 3 insertions(+) diff --git a/package/system/usign/Makefile b/package/system/usign/Makefile index 836b1524d3..ab7fda33a3 100644 --- a/package/system/usign/Makefile +++ b/package/system/usign/Makefile @@ -30,6 +30,9 @@ define Package/usign TITLE:=OpenWrt signature verification utility endef +TARGET_CFLAGS += -flto +TARGET_LDFLAGS += -flto=jobserver + CMAKE_OPTIONS += \ -DUSE_LIBUBOX=on