Merge Official Source

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>

config/Config-kernel.in

@@ -1213,6 +1213,20 @@ config KERNEL_PAGE_POOL_STATS
 	bool "Page pool stats support"
 	depends on KERNEL_PAGE_POOL
 
+config KERNEL_MPTCP
+	bool "Multi-Path TCP support"
+	default y if !SMALL_FLASH
+	help
+	   Select this option to enable support for Multi-Path TCP.
+	   Increases the compressed kernel size by ~214kB (as of Linux 6.6).
+
+if KERNEL_IPV6
+config KERNEL_MPTCP_IPV6
+	bool "IPv6 support for Multipath TCP"
+	depends on KERNEL_MPTCP
+	default KERNEL_MPTCP
+endif
+
 #
 # NFS related symbols
 #

include/image-commands.mk

@@ -316,12 +316,12 @@ define Build/elecom-product-header
 	$(eval product=$(word 1,$(1)))
 	$(eval fw=$(if $(word 2,$(1)),$(word 2,$(1)),$@))
 
-	( \
+	-( \
 		echo -n -e "ELECOM\x00\x00$(product)" | dd bs=40 count=1 conv=sync; \
 		echo -n "0.00" | dd bs=16 count=1 conv=sync; \
 		dd if=$(fw); \
-	) > $(fw).new
+	) > $(fw).new \
-	mv $(fw).new $(fw)
+	&& mv $(fw).new $(fw) || rm -f $(fw)
 endef
 
 define Build/elecom-wrc-gs-factory
@@ -351,10 +351,10 @@ define Build/elx-header
 		echo -ne "$$($(MKHASH) md5 $@ | fold -s2 | xargs -I {} echo \\x{} | tr -d '\n')" | \
 			dd bs=58 count=1 conv=sync; \
 	) > $(KDIR)/tmp/$(DEVICE_NAME).header
-	$(call Build/xor-image,-p $(xor_pattern) -x)
+	-$(call Build/xor-image,-p $(xor_pattern) -x) \
-	cat $(KDIR)/tmp/$(DEVICE_NAME).header $@ > $@.new
+	&& cat $(KDIR)/tmp/$(DEVICE_NAME).header $@ > $@.new \
-	mv $@.new $@
+	&& mv $@.new $@ \
-	rm -rf $(KDIR)/tmp/$(DEVICE_NAME).header
+	&& rm -rf $(KDIR)/tmp/$(DEVICE_NAME).header
 endef
 
 define Build/eva-image
@@ -621,8 +621,8 @@ define Build/seama-seal
 endef
 
 define Build/senao-header
-	$(STAGING_DIR_HOST)/bin/mksenaofw $(1) -e $@ -o $@.new
+	-$(STAGING_DIR_HOST)/bin/mksenaofw $(1) -e $@ -o $@.new \
-	mv $@.new $@
+	&& mv $@.new $@ || rm -f $@
 endef
 
 define Build/sysupgrade-tar
@@ -673,23 +673,22 @@ define Build/tplink-v1-image
 endef
 
 define Build/tplink-v2-header
-	$(STAGING_DIR_HOST)/bin/mktplinkfw2 \
+	-$(STAGING_DIR_HOST)/bin/mktplinkfw2 \
 		-c -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -L $(KERNEL_LOADADDR) \
 		-E $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR))  \
 		-w $(TPLINK_HWREVADD) -F "$(TPLINK_FLASHLAYOUT)" \
 		-T $(TPLINK_HVERSION) -V "ver. 2.0" \
-		-k $@ -o $@.new $(1)
+		-k $@ -o $@.new $(1) \
-	@mv $@.new $@
+	&& mv $@.new $@ || rm -f $@
 endef
 
 define Build/tplink-v2-image
-	$(STAGING_DIR_HOST)/bin/mktplinkfw2 \
+	-$(STAGING_DIR_HOST)/bin/mktplinkfw2 \
 		-H $(TPLINK_HWID) -W $(TPLINK_HWREV) \
 		-w $(TPLINK_HWREVADD) -F "$(TPLINK_FLASHLAYOUT)" \
 		-T $(TPLINK_HVERSION) -V "ver. 2.0" -a 0x4 -j \
-		-k $(IMAGE_KERNEL) -r $(IMAGE_ROOTFS) -o $@.new $(1)
+		-k $(IMAGE_KERNEL) -r $(IMAGE_ROOTFS) -o $@.new $(1) \
-	cat $@.new >> $@
+	&& cat $@.new >> $@ && rm -rf $@.new || rm -f $@
-	rm -rf $@.new
 endef
 
 define Build/uImage
@@ -726,8 +725,8 @@ define Build/multiImage
 endef
 
 define Build/xor-image
-	$(STAGING_DIR_HOST)/bin/xorimage -i $@ -o $@.xor $(1)
+	-$(STAGING_DIR_HOST)/bin/xorimage -i $@ -o $@.xor $(1) \
-	mv $@.xor $@
+	&& mv $@.xor $@ || rm -f $@
 endef
 
 define Build/zip

include/image.mk

@@ -280,7 +280,8 @@ endef
 
 define Image/Manifest
 	$(if $(CONFIG_USE_APK), \
-		$(call apk,$(TARGET_DIR_ORIG)) list --quiet --manifest --no-network | sort | sed 's/ / - /'  > \
+		$(call apk,$(TARGET_DIR_ORIG)) list --quiet --manifest --no-network \
+			--repositories-file /dev/zero | sort | sed 's/ / - /'  > \
 			$(BIN_DIR)/$(IMG_PREFIX)$(if $(PROFILE_SANITIZED),-$(PROFILE_SANITIZED)).manifest, \
 		$(call opkg,$(TARGET_DIR_ORIG)) list-installed > \
 			$(BIN_DIR)/$(IMG_PREFIX)$(if $(PROFILE_SANITIZED),-$(PROFILE_SANITIZED)).manifest \
@@ -325,7 +326,7 @@ ifdef CONFIG_TARGET_ROOTFS_CPIOGZ
 endif
 
 mkfs_packages = $(filter-out @%,$(PACKAGES_$(call param_get,pkg,pkg=$(target_params))))
-mkfs_packages_add = $(foreach pkg,$(filter-out -%,$(mkfs_packages)),$(pkg)$(call GetABISuffix,$(pkg)))
+mkfs_packages_add = $(foreach pkg,$(filter-out -% ~%,$(mkfs_packages)),$(pkg)$(call GetABISuffix,$(pkg)))
 mkfs_packages_remove = $(foreach pkg,$(patsubst -%,%,$(filter -%,$(mkfs_packages))),$(pkg)$(call GetABISuffix,$(pkg)))
 mkfs_cur_target_dir = $(call mkfs_target_dir,pkg=$(target_params))
 
@@ -333,7 +334,9 @@ opkg_target = \
 	$(call opkg,$(mkfs_cur_target_dir)) \
 		-f $(mkfs_cur_target_dir).conf
 
-apk_target = $(call apk,$(mkfs_cur_target_dir)) --no-scripts
+apk_target = \
+	$(call apk,$(mkfs_cur_target_dir)) --no-scripts \
+		--repositories-file /dev/zero --repository file://$(PACKAGE_DIR_ALL)/packages.adb
 
 
 target-dir-%: FORCE
@@ -539,6 +542,9 @@ define Device/Build/initramfs
 	$(call Kernel/CompileImage/Initramfs,$(KDIR)/target-dir-$$(ROOTFS_ID/$(1)),.$$(ROOTFS_ID/$(1)))
   endif
   $(1)-initramfs-images: $$(if $$(KERNEL_INITRAMFS),$(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE))
+
+  .IGNORE: $(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE)
+
   $(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE): $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE)
 	cp $$^ $$@
 

include/package-pack.mk

@@ -345,8 +345,17 @@ else
 	  --info "origin:$(SOURCE)" \
 	  --info "url:$(URL)" \
 	  --info "maintainer:$(MAINTAINER)" \
-	  --info "provides:$$(foreach prov,$$(filter-out $(1)$$(ABIV_$(1)),$(PROVIDES)$$(if $$(ABIV_$(1)), \
+	  --info "provides:$$(foreach prov,\
-		$(1) $(foreach provide,$(PROVIDES),$(provide)$$(ABIV_$(1))))),$$(prov)=$(VERSION) )" \
+			$$(filter-out $(1)$$(ABIV_$(1)), \
+			$(PROVIDES)$$(if $$(ABIV_$(1)), \
+				$(1)=$(VERSION) $(foreach provide, \
+					$(PROVIDES), \
+					$(provide)$$(ABIV_$(1))=$(VERSION) \
+				) \
+			) \
+		), \
+		$$(prov) )" \
+	  $(if $(DEFAULT_VARIANT),--info "provider-priority:100") \
 	  --script "post-install:$$(ADIR_$(1))/post-install" \
 	  --script "pre-deinstall:$$(ADIR_$(1))/pre-deinstall" \
 	  --info "depends:$$(foreach depends,$$(subst $$(comma),$$(space),$$(subst $$(space),,$$(subst $$(paren_right),,$$(subst $$(paren_left),,$$(Package/$(1)/DEPENDS))))),$$(depends))" \

include/rootfs.mk

@@ -47,12 +47,10 @@ apk = \
   IPKG_INSTROOT=$(1) \
   $(FAKEROOT) $(STAGING_DIR_HOST)/bin/apk \
 	--root $(1) \
-	--repositories-file /dev/zero \
+	--keys-dir $(if $(APK_KEYS),$(APK_KEYS),$(TOPDIR)) \
-	--keys-dir $(TOPDIR) \
 	--no-cache \
 	--no-logfile \
-	--preserve-env \
+	--preserve-env
-	--repository file://$(PACKAGE_DIR_ALL)/packages.adb
 
 TARGET_DIR_ORIG := $(TARGET_ROOTFS_DIR)/root.orig-$(BOARD)
 

package/Makefile

@@ -87,7 +87,7 @@ else
 endif
 else
 ifneq ($(CONFIG_USE_APK),)
-  $(curdir)/compile: $(BUILD_KEY_APK_SEC) $(BUILD_KEY_APK_PUB)
+  $(curdir)//compile += $(BUILD_KEY_APK_SEC) $(BUILD_KEY_APK_PUB)
 endif
 endif
 
@@ -98,7 +98,9 @@ $(curdir)/install: $(TMP_DIR)/.build $(curdir)/merge $(curdir)/merge-index
 ifneq ($(CONFIG_USE_APK),)
 	$(file >$(TMP_DIR)/apk_install_list,\
 	    $(foreach pkg,$(shell cat $(PACKAGE_INSTALL_FILES) 2>/dev/null),$(pkg)$(call GetABISuffix,$(pkg))))
-	$(call apk,$(TARGET_DIR)) add --initdb --no-scripts --arch $(ARCH_PACKAGES) $$(cat $(TMP_DIR)/apk_install_list)
+	$(call apk,$(TARGET_DIR)) add --initdb --no-scripts --arch $(ARCH_PACKAGES) \
+		--repositories-file /dev/zero --repository file://$(PACKAGE_DIR_ALL)/packages.adb \
+		$$(cat $(TMP_DIR)/apk_install_list)
 else
 	$(file >$(TMP_DIR)/opkg_install_list,\
 	  $(call opkg_package_files,\
@@ -128,7 +130,7 @@ ifneq ($(CONFIG_USE_APK),)
 			--keys-dir $(TOPDIR) \
 			--sign $(BUILD_KEY_APK_SEC) \
 			--output packages.adb \
-			*.apk; \
+			$$(ls *.apk | grep -v 'kernel\|libc'); \
 	done
 else
 	@for d in $(PACKAGE_SUBDIRS); do ( \

package/boot/uboot-rockchip/Makefile

@@ -170,6 +170,13 @@ define U-Boot/rk3566/Default
   TPL:=$(RK3566_TPL)
 endef
 
+define U-Boot/nanopi-r3s-rk3566
+  $(U-Boot/rk3566/Default)
+  NAME:=NanoPi R3S
+  BUILD_DEVICES:= \
+    friendlyarm_nanopi-r3s
+endef
+
 define U-Boot/radxa-cm3-io-rk3566
   $(U-Boot/rk3566/Default)
   NAME:=CM3 IO
@@ -386,6 +393,7 @@ UBOOT_TARGETS := \
   roc-cc-rk3328 \
   rock-pi-e-rk3328 \
   rock64-rk3328 \
+  nanopi-r3s-rk3566 \
   radxa-cm3-io-rk3566 \
   radxa-zero-3-rk3566 \
   rock-3c-rk3566 \

package/boot/uboot-rockchip/patches/900-arm-add-dts-files.patch

@@ -1,6 +1,6 @@
 --- a/arch/arm/dts/Makefile
 +++ b/arch/arm/dts/Makefile
-@@ -87,6 +87,19 @@ dtb-$(CONFIG_ROCKCHIP_RK3368) += \
+@@ -87,6 +87,22 @@ dtb-$(CONFIG_ROCKCHIP_RK3368) += \
  	rk3368-geekbox.dtb \
  	rk3368-px5-evb.dtb \
  
@@ -8,6 +8,9 @@
 +	rk3399-guangmiao-g4c.dtb \
 +	rk3399-nanopi-r4se.dtb
 +
++dtb-$(CONFIG_ROCKCHIP_RK3566) += \
++	rk3566-nanopi-r3s.dtb \
++
 +dtb-$(CONFIG_ROCKCHIP_RK3568) += \
 +	rk3568-armsom-sige3.dtb \
 +	rk3568-lyt-t68m.dtb \

package/boot/uboot-rockchip/src/arch/arm/dts/rk3566-nanopi-r3s-u-boot.dtsi

@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "rk356x-u-boot.dtsi"
+
+&sdhci {
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+};
+
+&vcc5v0_usb {
+	/delete-property/ regulator-always-on;
+	/delete-property/ regulator-boot-on;
+};

package/boot/uboot-rockchip/src/arch/arm/dts/rk3566-nanopi-r3s.dts

@@ -0,0 +1,572 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ *
+ * Copyright (c) 2024 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2024 Tianling Shen <cnsztl@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	model = "FriendlyARM NanoPi R3S";
+	compatible = "friendlyarm,nanopi-r3s", "rockchip,rk3566";
+
+	aliases {
+		ethernet0 = &gmac1;
+		mmc0 = &sdmmc0;
+		mmc1 = &sdhci;
+
+		led-boot = &power_led;
+		led-failsafe = &power_led;
+		led-running = &power_led;
+		led-upgrade = &power_led;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&reset_button_pin>;
+
+		button-reset {
+			label = "reset";
+			gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <50>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_led_pin>, <&lan_led_pin>, <&wan_led_pin>;
+
+		power_led: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		};
+
+		lan_led: led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan_led: led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	vdd_usbc: vdd-usbc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_usbc";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vdd_usbc>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb: vcc5v0_usb-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_host_en>;
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m0_miim
+		     &gmac1m0_tx_bus2_level3
+		     &gmac1m0_rx_bus2
+		     &gmac1m0_rgmii_clk_level2
+		     &gmac1m0_rgmii_bus_level3>;
+	snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		system-power-controller;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <950000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eth_phy_reset_pin>;
+		realtek,led-data = <0xae00>;
+	};
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_h>;
+	reset-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		rtl8168: pcie@1,0 {
+			compatible = "pci10ec,8168";
+			reg = <0x000000 0 0 0 0>;
+			realtek,led-data = <0x870>;
+		};
+	};
+};
+
+&pinctrl {
+	gpio-leds {
+		lan_led_pin: lan-led-pin {
+			rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		power_led_pin: power-led-pin {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wan_led_pin: wan-led-pin {
+			rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gmac {
+		eth_phy_reset_pin: eth-phy-reset-pin {
+			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pcie {
+		pcie_reset_h: pcie-reset-h {
+			rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rockchip-key {
+		reset_button_pin: reset-button-pin {
+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rtc {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb_host_en: vcc5v0-usb-host-en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_1v8>;
+	vccio6-supply = <&vcc_3v3>;
+	vccio7-supply = <&vcc_3v3>;
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr50;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	extcon = <&usb2phy0>;
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};

package/boot/uboot-rockchip/src/configs/nanopi-r3s-rk3566_defconfig

@@ -0,0 +1,73 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3566-nanopi-r3s"
+CONFIG_ROCKCHIP_RK3568=y
+CONFIG_SPL_SERIAL=y
+CONFIG_DEBUG_UART_BASE=0xFE660000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_PCI=y
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-nanopi-r3s.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_PAD_TO=0x7f8000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_ATF=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+# CONFIG_OF_UPSTREAM is not set
+CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_SPL_CLK=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_ROCKCHIP=y
+CONFIG_RTL8169=y
+CONFIG_NVME_PCI=y
+CONFIG_PCIE_DW_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_SPL_RAM=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_ERRNO_STR=y

package/firmware/cypress-firmware/Makefile

@@ -3,13 +3,14 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=cypress-firmware
-PKG_VERSION:=5.10.9-2022_0909
+PKG_VERSION_REAL:=5.10.9-2022_0909
+PKG_VERSION:=$(subst _,.,$(subst -,.,$(PKG_VERSION_REAL)))
 PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://github.com/Infineon/ifx-linux-firmware/
-PKG_MIRROR_HASH:=3e48063f0ee621d938cbfea24f9e5632751b6eac9fe09b0d1289181eed1ee95e
+PKG_MIRROR_HASH:=cbdd862fbaad08f5905482038e8a97fafea9bab5673d65370d90ef248c4172d1
-PKG_SOURCE_VERSION:=release-v$(PKG_VERSION)
+PKG_SOURCE_VERSION:=release-v$(PKG_VERSION_REAL)
 
 PKG_MAINTAINER:=Álvaro Fernández Rojas <noltari@gmail.com>
 PKG_LICENSE_FILES:=LICENCE

package/firmware/lantiq/dsl-vrx200-firmware-xdsl/Makefile

@@ -7,9 +7,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dsl_vr9_firmware_xdsl
-PKG_VERSION:=05.08.01.08.01.06_05.08.00.0B.01.01_osc
+PKG_VERSION:=05.08.01.08.01.06.05.08.00.11.01.01
+PKG_SOURCE_VERSION:=05.08.01.08.01.06_05.08.00.0B.01.01_osc
 PKG_RELEASE:=1
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_URL:=@OPENWRT
 PKG_HASH:=44cd94130571fe42dfa8f0f9d44597d104e9e77962617fe38646b7a0b4184a2b
 PKG_BUILD_DEPENDS:=bsdiff/host
@@ -18,9 +20,9 @@ PKG_FLAGS:=nonshared
 
 include $(INCLUDE_DIR)/package.mk
 
-PKG_B_NAME:=dsl_vr9_firmware_xdsl
+PKG_B_VERSION:=05.07.09.09.00.06.05.07.04.04.00.02
-PKG_B_VERSION:=05.07.09.09.00.06_05.07.04.04.00.02_osc
+PKG_B_SOURCE_VERSION:=05.07.09.09.00.06_05.07.04.04.00.02_osc
-PKG_B_SOURCE:=$(PKG_B_NAME)-$(PKG_B_VERSION).tar.gz
+PKG_B_SOURCE:=$(PKG_NAME)-$(PKG_B_SOURCE_VERSION).tar.gz
 
 ANNEX_A_VER:=581816_580B11
 ANNEX_B_VER:=579906_574402

package/kernel/bcm27xx-gpu-fw/Makefile

@@ -2,17 +2,18 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=bcm27xx-gpu-fw
-PKG_VERSION:=2024-04-24
+PKG_RELEASE_HASH:=969420b4121b522ab33c5001074cc4c2547dafaf
-PKG_RELEASE:=969420b4121b522ab33c5001074cc4c2547dafaf
+PKG_VERSION:=2024.04.24~$(PKG_RELEASE_HASH)
+PKG_RELEASE:=1
 
-PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)/rpi-firmware-$(PKG_RELEASE)
+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)/rpi-firmware-$(PKG_RELEASE_HASH)
 
 PKG_FLAGS:=nonshared
 
 include $(INCLUDE_DIR)/package.mk
 
-RPI_FIRMWARE_URL:=@GITHUB/raspberrypi/firmware/$(PKG_RELEASE)/boot/
+RPI_FIRMWARE_URL:=@GITHUB/raspberrypi/firmware/$(PKG_RELEASE_HASH)/boot/
-RPI_FIRMWARE_FILE:=rpi-firmware-$(PKG_RELEASE)
+RPI_FIRMWARE_FILE:=rpi-firmware-$(PKG_RELEASE_HASH)
 
 define Download/LICENCE_broadcom
   FILE:=$(RPI_FIRMWARE_FILE)-LICENCE.broadcom

package/kernel/linux/modules/netdevices.mk

@@ -1829,7 +1829,7 @@ $(eval $(call KernelPackage,sfp))
 define KernelPackage/pcs-xpcs
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=Synopsis DesignWare PCS driver
-  DEPENDS:=@(TARGET_x86_64||TARGET_armsr_armv8) +kmod-phylink
+  DEPENDS:=@(TARGET_x86_64||TARGET_armsr) +kmod-phylink
   KCONFIG:=CONFIG_PCS_XPCS
   FILES:=$(LINUX_DIR)/drivers/net/pcs/pcs_xpcs.ko
   AUTOLOAD:=$(call AutoLoad,20,pcs_xpcs)
@@ -1841,7 +1841,7 @@ $(eval $(call KernelPackage,pcs-xpcs))
 define KernelPackage/stmmac-core
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=Synopsis Ethernet Controller core (NXP,STMMicro,others)
-  DEPENDS:=@TARGET_x86_64||TARGET_armsr_armv8 +kmod-pcs-xpcs +kmod-ptp
+  DEPENDS:=@TARGET_x86_64||TARGET_armsr +kmod-pcs-xpcs +kmod-ptp
   KCONFIG:=CONFIG_STMMAC_ETH \
     CONFIG_STMMAC_SELFTESTS=n \
     CONFIG_STMMAC_PLATFORM \
@@ -2026,7 +2026,7 @@ $(eval $(call KernelPackage,lan743x))
 define KernelPackage/amazon-ena
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=Elastic Network Adapter (for Amazon AWS)
-  DEPENDS:=@TARGET_x86_64||TARGET_armsr_armv8
+  DEPENDS:=@TARGET_x86_64||TARGET_armsr
   KCONFIG:=CONFIG_ENA_ETHERNET
   FILES:=$(LINUX_DIR)/drivers/net/ethernet/amazon/ena/ena.ko
   AUTOLOAD:=$(call AutoLoad,12,ena)

package/kernel/linux/modules/netsupport.mk

@@ -1494,6 +1494,23 @@ endef
 $(eval $(call KernelPackage,inet-diag))
 
 
+define KernelPackage/inet-mptcp-diag
+  SUBMENU:=$(NETWORK_SUPPORT_MENU)
+  TITLE:=INET diag support for MultiPath TCP
+  DEPENDS:=@KERNEL_MPTCP +kmod-inet-diag
+  KCONFIG:=CONFIG_INET_MPTCP_DIAG
+  FILES:=$(LINUX_DIR)/net/mptcp/mptcp_diag.ko
+  AUTOLOAD:=$(call AutoProbe,mptcp_diag)
+endef
+
+define KernelPackage/inet-mptcp-diag/description
+Support for INET (MultiPath TCP) socket monitoring interface used by
+native Linux tools such as ss.
+endef
+
+$(eval $(call KernelPackage,inet-mptcp-diag))
+
+
 define KernelPackage/xdp-sockets-diag
   SUBMENU:=$(NETWORK_SUPPORT_MENU)
   TITLE:=PF_XDP sockets monitoring interface support for ss utility

package/kernel/mac80211/ralink.mk

@@ -1,6 +1,7 @@
 PKG_DRIVERS += \
 	rt2x00-lib rt2x00-pci rt2x00-usb rt2x00-mmio \
-	rt2800-lib rt2800-mmio rt2800-pci rt2800-soc rt2800-usb
+	rt2800-lib rt2800-mmio rt2800-pci rt2800-soc rt2800-usb \
+  rt61-pci rt73-usb
 
 PKG_CONFIG_DEPENDS += \
 	CONFIG_PACKAGE_RT2X00_LIB_DEBUGFS \
@@ -128,4 +129,18 @@ $(call KernelPackage/rt2x00/Default)
   AUTOLOAD:=$(call AutoProbe,rt2800usb)
 endef
 
+define KernelPackage/rt61-pci
+$(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +kmod-eeprom-93cx6 +kmod-lib-crc-itu-t +rt61-pci-firmware
+  TITLE+= (RT2x61 PCI)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt61pci.ko
+  AUTOLOAD:=$(call AutoProbe,rt61pci)
+endef
 
+define KernelPackage/rt73-usb
+  $(call KernelPackage/rt2x00/Default)
+  DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +kmod-lib-crc-itu-t +rt73-usb-firmware
+  TITLE+= (RT73 USB)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt73usb.ko
+  AUTOLOAD:=$(call AutoProbe,rt73usb)
+endef

package/network/utils/adb-enablemodem/Makefile

@@ -1,7 +1,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=adb-enablemodem
-PKG_VERSION:=2017-03-05
+PKG_VERSION:=2017.03.05
 PKG_RELEASE:=1
 
 include $(INCLUDE_DIR)/package.mk

package/network/utils/xdp-tools/Makefile

@@ -87,7 +87,8 @@ CONFIGURE_VARS += \
 	CLANG="$(CLANG)" \
 	BPF_TARGET="$(BPF_ARCH)-linux-gnu" \
 	LLC="$(LLVM_LLC)" \
-	BPF_LDFLAGS="-march=$(BPF_TARGET) -mcpu=v3"
+	BPF_LDFLAGS="-march=$(BPF_TARGET) -mcpu=v3" \
+	BPFTOOL=""
 
 ifneq ($(findstring s,$(OPENWRT_VERBOSE)),)
 	MAKE_FLAGS+=V=1

package/network/utils/xdp-tools/patches/021-headers-xdp-drop-vlan_hdr-as-already-defined.patch

@@ -1,31 +0,0 @@
-From bc2a11227b5bed29d33926d5ff7e707228db9e87 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Wed, 18 Jan 2023 20:07:58 +0100
-Subject: [PATCH] headers: xdp: drop vlan_hdr as already defined
-
-Drop vlan_hdr as already defined by bpf headers.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
----
- headers/xdp/parsing_helpers.h | 10 ----------
- 1 file changed, 10 deletions(-)
-
---- a/headers/xdp/parsing_helpers.h
-+++ b/headers/xdp/parsing_helpers.h
-@@ -33,16 +33,6 @@ struct hdr_cursor {
- };
- 
- /*
-- *	struct vlan_hdr - vlan header
-- *	@h_vlan_TCI: priority and VLAN ID
-- *	@h_vlan_encapsulated_proto: packet type ID or len
-- */
--struct vlan_hdr {
--	__be16	h_vlan_TCI;
--	__be16	h_vlan_encapsulated_proto;
--};
--
--/*
-  * Struct icmphdr_common represents the common part of the icmphdr and icmp6hdr
-  * structures.
-  */

package/system/apk/Makefile

@@ -5,9 +5,9 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://gitlab.alpinelinux.org/alpine/apk-tools.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2024-08-06
+PKG_SOURCE_DATE:=2024-10-28
-PKG_SOURCE_VERSION:=54caa31be633efc5f655700b77af290124f71689
+PKG_SOURCE_VERSION:=a1ad8568a1378d71c1f6354c428ebb1baa46fa05
-PKG_MIRROR_HASH:=f3be762deac4f1469a4a2839691175e78019cb44295089befafa279a3390067c
+PKG_MIRROR_HASH:=68747e1253776dc00286c01e408f4c4e1eb61acf56009b7ecb3de4d49b34e567
 
 PKG_VERSION=3.0.0_pre$(subst -,,$(PKG_SOURCE_DATE))
 
@@ -54,6 +54,7 @@ MESON_VARS+=VERSION=$(PKG_VERSION)
 MESON_HOST_ARGS += \
 	-Dcompressed-help=false \
 	-Ddocs=disabled \
+	-Durl_backend=wget \
 	-Dcrypto_backend=openssl \
 	-Dzstd=false
 

package/system/apk/patches/0001-openwrt-move-layer-db-to-temp-folder.patch

@@ -10,7 +10,7 @@ Signed-off-by: Paul Spooren <mail@aparcar.org>
 
 --- a/src/database.c
 +++ b/src/database.c
-@@ -1643,7 +1643,7 @@ const char *apk_db_layer_name(int layer)
+@@ -1626,7 +1626,7 @@ const char *apk_db_layer_name(int layer)
  {
  	switch (layer) {
  	case APK_DB_LAYER_ROOT: return "lib/apk/db";

package/system/apk/patches/0010-apk_defines-add-default-arch-for-ARM-Big-Endian.patch

@@ -0,0 +1,29 @@
+From ffcda7769279e75993110766555eea6d3c6baae7 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Fri, 25 Oct 2024 01:09:41 +0200
+Subject: [PATCH] apk_defines: add default arch for ARM Big-Endian
+
+Add default arch for ARM Big-Endiang named armeb. One example of such
+target are devices based on the Intel XScale IXP4xx SoC.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+---
+ src/apk_defines.h | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/src/apk_defines.h b/src/apk_defines.h
+index c92dacd..06351df 100644
+--- a/src/apk_defines.h
++++ b/src/apk_defines.h
+@@ -126,6 +126,8 @@ static inline int IS_ERR(const void *ptr) { return (unsigned long)ptr >= (unsign
+ #define APK_DEFAULT_BASE_ARCH	"armhf"
+ #elif defined(__arm__) && __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+ #define APK_DEFAULT_BASE_ARCH	"armel"
++#elif defined(__arm__) && __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
++#define APK_DEFAULT_BASE_ARCH	"armeb"
+ #elif defined(__aarch64__) && __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+ #define APK_DEFAULT_BASE_ARCH	"aarch64"
+ #elif defined(__s390x__)
+-- 
+2.45.2
+

package/utils/adb/Makefile

@@ -2,16 +2,14 @@ include $(TOPDIR)/rules.mk
 #Based on adb package from AUR https://aur.archlinux.org/packages/adb/ , reused Makefile
 
 PKG_NAME:=adb
-PKG_VERSION:=android.5.0.2_r1
+PKG_SOURCE_VERSION:=6fe92d1a3fb17545d82d020a3c995f32e6b71f9d
+PKG_VERSION:=5.0.2~$(call version_abbrev,$(PKG_SOURCE_VERSION))
 PKG_RELEASE:=3
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://android.googlesource.com/platform/system/core
-PKG_SOURCE_VERSION:=6fe92d1a3fb17545d82d020a3c995f32e6b71f9d
+PKG_MIRROR_HASH:=2ff96b4342cd05f475083207a4927635548c6693771c12a24cfa99f175fdb10a
-PKG_MIRROR_HASH:=a9b4b86602dfc0d4fc9e1d0f78dc83e648a931fb04f5a4be9b1f0054a8cebf7e
+
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_SOURCE_VERSION)
-PKG_SOURCE:=$(PKG_SOURCE_SUBDIR).tar.xz
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_SOURCE_SUBDIR)
 PKG_MAINTAINER:=Henryk Heisig <hyniu@o2.pl>
 PKG_CPE_ID:=cpe:/a:google:android_debug_bridge
 

package/utils/bcm27xx-utils/Makefile

@@ -3,13 +3,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bcm27xx-utils
-PKG_VERSION:=2024-04-24
+PKG_VERSION:=2024.10.25
 PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://github.com/raspberrypi/utils.git
-PKG_SOURCE_VERSION:=451b9881b72cb994c102724b5a7d9b93f97dc315
+PKG_SOURCE_VERSION:=6a2a6becebbc38fde34a94386457ac8210f9119b
-PKG_MIRROR_HASH:=b453976171187e0ffe7cacfdcab36cec6b5d02db8b6d978cb9afbbcafcfcff9d
+PKG_MIRROR_HASH:=a775c7ffb9fac2d798ec8e0a4c7707eb7133cbc9c4418a1cf9434f87c42c01bb
 
 PKG_FLAGS:=nonshared
 PKG_BUILD_FLAGS:=no-lto
@@ -46,6 +46,8 @@ define Package/bcm27xx-utils/install
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/eepflash.sh $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/eepmake $(1)/usr/bin
 
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/kdtc $(1)/usr/bin
+
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/otpset $(1)/usr/bin
 
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/overlaycheck $(1)/usr/bin

package/utils/bcm27xx-utils/patches/0001-raspinfo-adapt-to-OpenWrt.patch

@@ -242,6 +242,15 @@ Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
  else
     echo "vcdbg not found"
  fi
+@@ -275,7 +111,7 @@ echo "dmesg log"
+ echo "---------"
+ echo
+ 
+-sudo dmesg | sed -e "s/\([0-9a-fA-F]\{1,4\}:\)\{7,7\}[0-9a-fA-F]\{1,4\}/y.y.y.y.y.y.y.y/g" | sed -e "s/[0-9a-fA-F]\{1,4\}:\(:[0-9a-fA-F]\{1,4\}\)\{1,4\}/y::y.y.y.y/g" | sed -e "s/\([0-9a-fA-F]\{2,2\}\:\)\{5,5\}[0-9a-fA-F]\{2,2\}/m.m.m.m/g"
++dmesg | sed -e "s/\([0-9a-fA-F]\{1,4\}:\)\{7,7\}[0-9a-fA-F]\{1,4\}/y.y.y.y.y.y.y.y/g" | sed -e "s/[0-9a-fA-F]\{1,4\}:\(:[0-9a-fA-F]\{1,4\}\)\{1,4\}/y::y.y.y.y/g" | sed -e "s/\([0-9a-fA-F]\{2,2\}\:\)\{5,5\}[0-9a-fA-F]\{2,2\}/m.m.m.m/g"
+ 
+ 
+ if  grep -q "^Revision\s*:\s*[ 123][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]1[13457][0-9a-fA-F]$" /proc/cpuinfo
 @@ -284,5 +120,9 @@ echo
  echo "EEPROM"
  echo "------"

package/utils/dns320l-mcu/Makefile

@@ -5,9 +5,9 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=https://github.com/wigyori/dns320l-daemon.git
-PKG_SOURCE_DATE:=2024-05-11
+PKG_SOURCE_DATE:=2024-10-27
-PKG_SOURCE_VERSION:=c74941880e0a8d2bc0344b3256b984397512e8c3
+PKG_SOURCE_VERSION:=d9a2878a525f61fe9070a9f03eb67e5113a69a4f
-PKG_MIRROR_HASH:=e0f186a0c139ccfac3d311f49e2fecdbd02fa3f9fe6ced4b1ce0baa603d49fc3
+PKG_MIRROR_HASH:=5f769253d63f8da1cc0cefd86159bafb4e4f8a54c26a0cbf254ee4d1c53f79bf
 PKG_MAINTAINER:=Zoltan HERPAI <wigyori@uid0.hu>
 PKG_LICENSE:=GPL-3.0+
 

package/utils/omnia-mcutool/Makefile

@@ -8,12 +8,14 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=omnia-mcutool
-PKG_VERSION:=0.3-rc3
+PKG_VERSION_REAL:=0.3-rc3
 PKG_RELEASE:=1
 
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
+PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://gitlab.nic.cz/turris/$(PKG_NAME)/-/archive/$(PKG_VERSION)/
+PKG_SOURCE_URL=https://gitlab.nic.cz/turris/$(PKG_NAME)
-PKG_HASH:=80bc6a01ab86d51ebfdbddf77d74eead999a9bf7dbd08ca1fd4e8e1910eaf192
+PKG_SOURCE_DATE:=2024-08-05
+PKG_SOURCE_VERSION:=3833ade1377076a5c8e394d7afe7679716af0107
+PKG_MIRROR_HASH:=63cfaa388cffc8a5a7d08c14d6428d1bb33ae7aebf62a1764fd57f8bc94f9144
 
 PKG_MAINTAINER:=Marek Mojik <marek.mojik@nic.cz>
 PKG_LICENSE:=GPL-2.0-or-later
@@ -41,7 +43,7 @@ define Build/Compile
 		CC="$(TARGET_CC)" \
 		CFLAGS="$(TARGET_CFLAGS) -Wall" \
 		LDFLAGS="$(TARGET_LDFLAGS)" \
-		MCUTOOL_VERSION="$(PKG_VERSION)"
+		MCUTOOL_VERSION="$(PKG_VERSION_REAL)"
 endef
 
 define Package/omnia-mcutool/install

rules.mk

@@ -141,8 +141,8 @@ ifeq ($(or $(CONFIG_EXTERNAL_TOOLCHAIN),$(CONFIG_TARGET_uml)),)
   iremap = -f$(if $(CONFIG_REPRODUCIBLE_DEBUG_INFO),file,macro)-prefix-map=$(1)=$(2)
 endif
 
-PACKAGE_DIR:=$(BIN_DIR)/packages
+PACKAGE_DIR?=$(BIN_DIR)/packages
-PACKAGE_DIR_ALL:=$(TOPDIR)/staging_dir/packages/$(BOARD)
+PACKAGE_DIR_ALL?=$(TOPDIR)/staging_dir/packages/$(BOARD)
 BUILD_DIR:=$(BUILD_DIR_BASE)/$(TARGET_DIR_NAME)
 STAGING_DIR:=$(TOPDIR)/staging_dir/$(TARGET_DIR_NAME)
 BUILD_DIR_TOOLCHAIN:=$(BUILD_DIR_BASE)/$(TOOLCHAIN_DIR_NAME)

scripts/target-metadata.pl

@@ -146,7 +146,7 @@ sub merge_package_lists($$) {
 	my %pkgs;
 
 	foreach my $pkg (@$list1, @$list2) {
-		$pkgs{$pkg} = 1;
+		$pkgs{$pkg =~ s/^~//r} = 1;
 	}
 	foreach my $pkg (keys %pkgs) {
 		push @l, $pkg unless ($pkg =~ /^-/ or $pkgs{"-$pkg"});

target/imagebuilder/Makefile

@@ -48,6 +48,7 @@ ifneq ($(CONFIG_USE_APK),)
 	$(call FeedSourcesAppendAPK,$(PKG_BUILD_DIR)/repositories)
 	$(VERSION_SED_SCRIPT) $(PKG_BUILD_DIR)/repositories
   endif
+	echo "packages/packages.adb" >> $(PKG_BUILD_DIR)/repositories
 
 	$(INSTALL_DATA) ./files/README.apk.md $(PKG_BUILD_DIR)/packages/README.md
 else
@@ -70,7 +71,7 @@ endif
 ifeq ($(CONFIG_BUILDBOT),)
   ifeq ($(CONFIG_IB_STANDALONE),)
 	$(FIND) $(call FeedPackageDir,libc) -type f \
-		\( -name 'libc_*.$(PACKAGE_SUFFIX)' -or -name 'kernel_*.$(PACKAGE_SUFFIX)' -or -name 'kmod-*.$(PACKAGE_SUFFIX)' \) \
+		\( -name 'libc*.$(PACKAGE_SUFFIX)' -or -name 'kernel*.$(PACKAGE_SUFFIX)' -or -name 'kmod-*.$(PACKAGE_SUFFIX)' \) \
 		-exec $(CP) -t $(PKG_BUILD_DIR)/packages {} +
   else
 	$(FIND) $(wildcard $(PACKAGE_SUBDIRS)) -type f -name '*.$(PACKAGE_SUFFIX)' \
@@ -78,17 +79,20 @@ ifeq ($(CONFIG_BUILDBOT),)
   endif
 else
 	$(FIND) $(call FeedPackageDir,libc) -type f \
-		\( -name 'libc_*.$(PACKAGE_SUFFIX)' -or -name 'kernel_*.$(PACKAGE_SUFFIX)' \) \
+		\( -name 'libc*.$(PACKAGE_SUFFIX)' -or -name 'kernel*.$(PACKAGE_SUFFIX)' \) \
 		-exec $(CP) -t $(IB_LDIR)/ {} +
 endif
 
-ifneq ($(CONFIG_USE_APK),y)
 ifneq ($(CONFIG_SIGNATURE_CHECK),)
+ifneq ($(CONFIG_USE_APK),y)
 	echo ''                                                        >> $(PKG_BUILD_DIR)/repositories.conf
 	echo 'option check_signature'                                  >> $(PKG_BUILD_DIR)/repositories.conf
 	$(INSTALL_DIR) $(PKG_BUILD_DIR)/keys
 	$(CP) -L $(STAGING_DIR_ROOT)/etc/opkg/keys/ $(PKG_BUILD_DIR)/
 	$(CP) -L $(STAGING_DIR_ROOT)/usr/sbin/opkg-key $(PKG_BUILD_DIR)/scripts/
+else
+	$(INSTALL_DIR) $(PKG_BUILD_DIR)/keys
+	$(CP) -L $(STAGING_DIR_ROOT)/etc/apk/keys/ $(PKG_BUILD_DIR)/
 endif
 endif
 

target/imagebuilder/files/Makefile

@@ -83,9 +83,11 @@ help: FORCE
 
 
 # override variables from rules.mk
-PACKAGE_DIR:=$(TOPDIR)/packages
+BUILD_KEY_APK_SEC=$(TOPDIR)/keys/local-private-key.pem
+BUILD_KEY_APK_PUB=$(TOPDIR)/keys/local-public-key.pem
+export PACKAGE_DIR:=$(TOPDIR)/packages
 LISTS_DIR:=$(subst $(space),/,$(patsubst %,..,$(subst /,$(space),$(TARGET_DIR))))$(DL_DIR)
-PACKAGE_DIR_ALL:=$(TOPDIR)/packages
+export PACKAGE_DIR_ALL:=$(TOPDIR)/packages
 
 export OPKG_KEYS:=$(TOPDIR)/keys
 OPKG:=$(call opkg,$(TARGET_DIR)) \
@@ -94,9 +96,11 @@ OPKG:=$(call opkg,$(TARGET_DIR)) \
 	--cache $(DL_DIR) \
 	--lists-dir $(LISTS_DIR)
 
+export APK_KEYS:=$(TOPDIR)/keys
 APK:=$(call apk,$(TARGET_DIR)) \
-	--cache-dir $(DL_DIR) \
+	--repositories-file $(TOPDIR)/repositories \
-	--allow-untrusted
+	$(if $(CONFIG_SIGNATURE_CHECK),,--allow-untrusted) \
+	--cache-dir $(DL_DIR)
 
 
 include $(INCLUDE_DIR)/target.mk
@@ -177,7 +181,11 @@ ifeq ($(CONFIG_USE_APK),)
 	) >/dev/null 2>/dev/null
 	$(OPKG) update >&2 || true
 else
-	(cd $(PACKAGE_DIR); $(APK) mkndx --output packages.adb *.apk) >&2
+	$(APK) add --initdb
+	(cd $(PACKAGE_DIR); $(APK) mkndx \
+		$(if $(CONFIG_SIGNATURE_CHECK), --keys-dir $(APK_KEYS) --sign $(BUILD_KEY_APK_SEC)) \
+		--allow-untrusted --output packages.adb *.apk) >/dev/null 2>/dev/null || true
+	$(APK) update >&2 || true
 endif
 
 package_reload:
@@ -220,8 +228,8 @@ ifeq ($(CONFIG_USE_APK),)
 	$(OPKG) install $(firstword $(wildcard $(LINUX_DIR)/kernel_*.ipk $(PACKAGE_DIR)/kernel_*.ipk))
 	$(OPKG) install $(BUILD_PACKAGES)
 else
-	$(APK) add --initdb --no-scripts $(firstword $(wildcard $(LINUX_DIR)/libc-*.apk $(PACKAGE_DIR)/libc_*.apk))
+	$(APK) add --no-scripts $(firstword $(wildcard $(LINUX_DIR)/libc-*.apk $(PACKAGE_DIR)/libc-*.apk))
-	$(APK) add --no-scripts $(firstword $(wildcard $(LINUX_DIR)/kernel-*.apk $(PACKAGE_DIR)/kernel_*.apk))
+	$(APK) add --no-scripts $(firstword $(wildcard $(LINUX_DIR)/kernel-*.apk $(PACKAGE_DIR)/kernel-*.apk))
 	$(APK) add --no-scripts $(BUILD_PACKAGES)
 endif
 
@@ -237,6 +245,13 @@ ifeq ($(CONFIG_USE_APK),)
 			$(SCRIPT_DIR)/opkg-key add $(BUILD_KEY).pub \
 		) \
 	)
+else
+	$(if $(CONFIG_SIGNATURE_CHECK), \
+		$(if $(ADD_LOCAL_KEY), \
+			mkdir -p $(TARGET_DIR)/etc/opkg/keys/; \
+			cp $(BUILD_KEY_APK_PUB) $(TARGET_DIR)/etc/apk/keys/; \
+		) \
+	)
 endif
 	$(call prepare_rootfs,$(TARGET_DIR),$(USER_FILES),$(DISABLED_SERVICES))
 
@@ -284,8 +299,8 @@ ifneq ($(PROFILE),)
 endif
 
 _check_keys: FORCE
-ifeq ($(CONFIG_USE_APK),)
 ifneq ($(CONFIG_SIGNATURE_CHECK),)
+ifeq ($(CONFIG_USE_APK),)
 	@if [ ! -s $(BUILD_KEY) -o ! -s $(BUILD_KEY).pub ]; then \
 		echo Generate local signing keys... >&2; \
 		$(STAGING_DIR_HOST)/bin/usign -G \
@@ -299,9 +314,15 @@ ifneq ($(CONFIG_SIGNATURE_CHECK),)
 			-p $(BUILD_KEY).pub \
 			-s $(BUILD_KEY); \
 	fi
-endif
 else
-	# TODO
+	@if [ ! -s $(BUILD_KEY_APK_SEC) -o ! -s $(BUILD_KEY_APK_PUB) ]; then \
+		echo Generate local signing keys... >&2; \
+		$(STAGING_DIR_HOST)/bin/openssl ecparam -name prime256v1 -genkey -noout -out $(BUILD_KEY_APK_SEC); \
+		sed -i '1s/^/untrusted comment: Local build key\n/' $(BUILD_KEY_APK_SEC); \
+		$(STAGING_DIR_HOST)/bin/openssl ec -in $(BUILD_KEY_APK_SEC) -pubout > $(BUILD_KEY_APK_PUB); \
+		sed -i '1s/^/untrusted comment: Local build key\n/' $(BUILD_KEY_APK_PUB); \
+	fi
+endif
 endif
 
 image:

target/linux/airoha/patches-6.6/030-v6.13-hwrng-airoha-add-support-for-Airoha-EN7581-TRNG.patch

@@ -1,7 +1,7 @@
-From 9dbd16ac89e00bd8640ecac3971b0943410b5cec Mon Sep 17 00:00:00 2001
+From 5c5db81bff81a0fcd9ad998543d4241cbfe4742f Mon Sep 17 00:00:00 2001
 From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Sat, 6 Jul 2024 01:15:24 +0200
+Date: Thu, 17 Oct 2024 14:44:38 +0200
-Subject: [PATCH 2/2] hwrng: add support for Airoha EN7581 TRNG
+Subject: [PATCH 2/2] hwrng: airoha - add support for Airoha EN7581 TRNG
 
 Add support for Airoha TRNG. The Airoha SoC provide a True RNG module
 that can output 4 bytes of raw data at times.
@@ -17,6 +17,8 @@ mutually exclusive, running as TRNG doesn't permit to also run it as
 DRBG.
 
 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Reviewed-by: Martin Kaiser <martin@kaiser.cx>
+Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
 ---
  drivers/char/hw_random/Kconfig       |  13 ++
  drivers/char/hw_random/Makefile      |   1 +
@@ -65,13 +67,13 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
 +#include <linux/kernel.h>
 +#include <linux/module.h>
 +#include <linux/mod_devicetable.h>
-+#include <linux/err.h>
++#include <linux/bitfield.h>
++#include <linux/delay.h>
++#include <linux/hw_random.h>
++#include <linux/interrupt.h>
 +#include <linux/io.h>
 +#include <linux/iopoll.h>
-+#include <linux/interrupt.h>
-+#include <linux/hw_random.h>
 +#include <linux/platform_device.h>
-+#include <linux/delay.h>
 +
 +#define TRNG_IP_RDY			0x800
 +#define   CNT_TRANS			GENMASK(15, 8)

target/linux/armsr/image/Makefile

@@ -110,11 +110,11 @@ define Device/generic
   DEVICE_PACKAGES += kmod-amazon-ena kmod-e1000e kmod-vmxnet3 kmod-rtc-rx8025 \
 	kmod-i2c-mux-pca954x kmod-gpio-pca953x partx-utils kmod-wdt-sp805 \
 	kmod-mvneta kmod-mvpp2 kmod-fsl-dpaa1-net kmod-fsl-dpaa2-net \
-	kmod-fsl-enetc-net kmod-dwmac-imx kmod-fsl-fec kmod-thunderx-net \
+	kmod-fsl-enetc-net kmod-dwmac-imx kmod-fsl-fec \
 	kmod-dwmac-rockchip kmod-dwmac-sun8i kmod-phy-aquantia kmod-phy-broadcom \
 	kmod-phy-marvell kmod-phy-marvell-10g kmod-sfp kmod-atlantic \
 	kmod-bcmgenet kmod-octeontx2-net kmod-renesas-net-avb \
-	kmod-phy-realtek kmod-phy-smsc
+	kmod-phy-realtek kmod-phy-smsc $(if $(CONFIG_aarch64),kmod-thunderx-net)
 endef
 TARGET_DEVICES += generic
 

target/linux/armsr/modules.mk

@@ -1,7 +1,7 @@
 define KernelPackage/acpi-mdio
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=ACPI MDIO support
-  DEPENDS:=@(TARGET_armsr_armv8) +kmod-libphy +kmod-mdio-devres
+  DEPENDS:=@TARGET_armsr +kmod-libphy +kmod-mdio-devres
   KCONFIG:=CONFIG_ACPI_MDIO
   FILES:=$(LINUX_DIR)/drivers/net/mdio/acpi_mdio.ko
   AUTOLOAD:=$(call AutoLoad,11,acpi_mdio)
@@ -15,7 +15,7 @@ $(eval $(call KernelPackage,acpi-mdio))
 
 define KernelPackage/bcmgenet
   SUBMENU=$(NETWORK_DEVICES_MENU)
-  DEPENDS:=@(TARGET_armsr_armv8) +kmod-mdio-bcm-unimac
+  DEPENDS:=@TARGET_armsr +kmod-mdio-bcm-unimac
   TITLE:=Broadcom GENET internal MAC (Raspberry Pi 4)
   KCONFIG:=CONFIG_BCMGENET
   FILES=$(LINUX_DIR)/drivers/net/ethernet/broadcom/genet/genet.ko
@@ -26,7 +26,7 @@ $(eval $(call KernelPackage,bcmgenet))
 
 define KernelPackage/mdio-bcm-unimac
   SUBMENU=$(NETWORK_DEVICES_MENU)
-  DEPENDS:=@(TARGET_armsr_armv8) +kmod-of-mdio
+  DEPENDS:=@TARGET_armsr +kmod-of-mdio
   TITLE:=Broadcom UniMAC MDIO bus controller
   KCONFIG:=CONFIG_MDIO_BCM_UNIMAC
   FILES=$(LINUX_DIR)/drivers/net/mdio/mdio-bcm-unimac.ko
@@ -37,7 +37,7 @@ $(eval $(call KernelPackage,mdio-bcm-unimac))
 
 define KernelPackage/fsl-pcs-lynx
   SUBMENU=$(NETWORK_DEVICES_MENU)
-  DEPENDS:=@(TARGET_armsr_armv8) +kmod-libphy +kmod-of-mdio +kmod-phylink
+  DEPENDS:=@TARGET_armsr +kmod-libphy +kmod-of-mdio +kmod-phylink
   TITLE:=NXP (Freescale) Lynx PCS
   HIDDEN:=1
   KCONFIG:=CONFIG_PCS_LYNX
@@ -49,7 +49,7 @@ $(eval $(call KernelPackage,fsl-pcs-lynx))
 
 define KernelPackage/fsl-fec
   SUBMENU:=$(NETWORK_DEVICES_MENU)
-  DEPENDS:=@(TARGET_armsr_armv8) +kmod-libphy +kmod-of-mdio \
+  DEPENDS:=@TARGET_armsr +kmod-libphy +kmod-of-mdio \
     +kmod-ptp +kmod-net-selftests
   TITLE:=NXP (Freescale) FEC Ethernet controller (i.MX)
   KCONFIG:=CONFIG_FEC
@@ -61,7 +61,7 @@ $(eval $(call KernelPackage,fsl-fec))
 
 define KernelPackage/fsl-xgmac-mdio
   SUBMENU=$(NETWORK_DEVICES_MENU)
-  DEPENDS:=@(TARGET_armsr_armv8) +kmod-libphy +kmod-of-mdio +kmod-acpi-mdio
+  DEPENDS:=@TARGET_armsr +kmod-libphy +kmod-of-mdio +kmod-acpi-mdio
   TITLE:=NXP (Freescale) MDIO bus
   KCONFIG:=CONFIG_FSL_XGMAC_MDIO
   FILES=$(LINUX_DIR)/drivers/net/ethernet/freescale/xgmac_mdio.ko
@@ -85,7 +85,7 @@ $(eval $(call KernelPackage,fsl-mc-dpio))
 define KernelPackage/fsl-enetc-net
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=:NXP ENETC (LS1028A) Ethernet
-  DEPENDS:=@(TARGET_armsr_armv8) +kmod-phylink +kmod-fsl-pcs-lynx
+  DEPENDS:=@TARGET_armsr +kmod-phylink +kmod-fsl-pcs-lynx
   KCONFIG:= \
     CONFIG_FSL_ENETC \
     CONFIG_FSL_ENETC_VF \
@@ -104,7 +104,7 @@ $(eval $(call KernelPackage,fsl-enetc-net))
 define KernelPackage/fsl-dpaa1-net
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=NXP DPAA1 (LS1043/LS1046) Ethernet
-  DEPENDS:=@(TARGET_armsr_armv8) +kmod-fsl-xgmac-mdio +kmod-libphy +kmod-crypto-crc32
+  DEPENDS:=@TARGET_armsr +kmod-fsl-xgmac-mdio +kmod-libphy +kmod-crypto-crc32
   KCONFIG:= \
     CONFIG_FSL_DPAA=y \
     CONFIG_FSL_DPAA_ETH \
@@ -124,7 +124,7 @@ $(eval $(call KernelPackage,fsl-dpaa1-net))
 define KernelPackage/fsl-dpaa2-net
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=NXP DPAA2 Ethernet
-  DEPENDS:=@(TARGET_armsr_armv8) +kmod-fsl-xgmac-mdio +kmod-phylink \
+  DEPENDS:=@TARGET_armsr +kmod-fsl-xgmac-mdio +kmod-phylink \
     +kmod-fsl-pcs-lynx +kmod-fsl-mc-dpio
   KCONFIG:= \
     CONFIG_FSL_MC_UAPI_SUPPORT=y \
@@ -139,7 +139,7 @@ $(eval $(call KernelPackage,fsl-dpaa2-net))
 define KernelPackage/fsl-dpaa2-console
   SUBMENU:=$(OTHER_MENU)
   TITLE:=NXP DPAA2 Debug console
-  DEPENDS:=@(TARGET_armsr_armv8)
+  DEPENDS:=@TARGET_armsr
   KCONFIG:=CONFIG_DPAA2_CONSOLE
   FILES=$(LINUX_DIR)/drivers/soc/fsl/dpaa2-console.ko
   AUTOLOAD=$(call AutoLoad,40,dpaa2-console)
@@ -155,7 +155,7 @@ $(eval $(call KernelPackage,fsl-dpaa2-console))
 define KernelPackage/marvell-mdio
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=Marvell Armada platform MDIO driver
-  DEPENDS:=@(TARGET_armsr_armv8) +kmod-libphy +kmod-of-mdio +kmod-acpi-mdio
+  DEPENDS:=@TARGET_armsr +kmod-libphy +kmod-of-mdio +kmod-acpi-mdio
   KCONFIG:=CONFIG_MVMDIO
   FILES=$(LINUX_DIR)/drivers/net/ethernet/marvell/mvmdio.ko
   AUTOLOAD=$(call AutoLoad,30,marvell-mdio)
@@ -166,7 +166,7 @@ $(eval $(call KernelPackage,marvell-mdio))
 define KernelPackage/mvneta
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=Marvell Armada 370/38x/XP/37xx network driver
-  DEPENDS:=@(TARGET_armsr_armv8) +kmod-marvell-mdio +kmod-phylink
+  DEPENDS:=@TARGET_armsr +kmod-marvell-mdio +kmod-phylink
   KCONFIG:=CONFIG_MVNETA
   FILES:=$(LINUX_DIR)/drivers/net/ethernet/marvell/mvneta.ko
   AUTOLOAD=$(call AutoLoad,30,mvneta)
@@ -177,7 +177,7 @@ $(eval $(call KernelPackage,mvneta))
 define KernelPackage/mvpp2
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=Marvell Armada 375/7K/8K network driver
-  DEPENDS:=@(TARGET_armsr_armv8) +kmod-marvell-mdio +kmod-phylink
+  DEPENDS:=@TARGET_armsr +kmod-marvell-mdio +kmod-phylink
   KCONFIG:=CONFIG_MVPP2 \
     CONFIG_MVPP2_PTP=n
   FILES=$(LINUX_DIR)/drivers/net/ethernet/marvell/mvpp2/mvpp2.ko
@@ -242,7 +242,7 @@ $(eval $(call KernelPackage,dwmac-rockchip))
 define KernelPackage/mdio-thunder
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=Marvell (Cavium) Thunder MDIO controller
-  DEPENDS:=@(TARGET_armsr_armv8) +kmod-of-mdio
+  DEPENDS:=@TARGET_armsr +kmod-of-mdio
   KCONFIG:=CONFIG_MDIO_THUNDER
   FILES=$(LINUX_DIR)/drivers/net/mdio/mdio-cavium.ko \
     $(LINUX_DIR)/drivers/net/mdio/mdio-thunder.ko
@@ -254,7 +254,7 @@ $(eval $(call KernelPackage,mdio-thunder))
 define KernelPackage/thunderx-net
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=Marvell (Cavium) Thunder network drivers
-  DEPENDS:=@(TARGET_armsr_armv8) +kmod-phylink +kmod-mdio-thunder
+  DEPENDS:=@TARGET_armsr_armv8 +kmod-phylink +kmod-mdio-thunder
   KCONFIG:=CONFIG_NET_VENDOR_CAVIUM \
     CONFIG_THUNDER_NIC_PF \
     CONFIG_THUNDER_NIC_VF \
@@ -272,7 +272,7 @@ $(eval $(call KernelPackage,thunderx-net))
 define KernelPackage/octeontx2-net
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=Marvell (Cavium) ThunderX2 network drivers
-  DEPENDS:=@(TARGET_armsr_armv8) +kmod-phylink +kmod-of-mdio +kmod-macsec \
+  DEPENDS:=@TARGET_armsr +kmod-phylink +kmod-of-mdio +kmod-macsec \
     +kmod-ptp
   KCONFIG:=CONFIG_OCTEONTX2_MBOX \
     CONFIG_OCTEONTX2_AF \
@@ -291,7 +291,7 @@ $(eval $(call KernelPackage,octeontx2-net))
 define KernelPackage/renesas-net-avb
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=Renesas network drivers
-  DEPENDS:=@(TARGET_armsr_armv8) +kmod-phylink +kmod-mii +kmod-ptp +kmod-libphy +kmod-mdio-gpio
+  DEPENDS:=@TARGET_armsr +kmod-phylink +kmod-mii +kmod-ptp +kmod-libphy +kmod-mdio-gpio
   KCONFIG:=CONFIG_RAVB
   FILES=$(LINUX_DIR)/drivers/net/ethernet/renesas/ravb.ko
   AUTOLOAD:=$(call AutoProbe,ravb)

target/linux/ath79/image/generic-tp-link.mk

@@ -684,7 +684,7 @@ define Device/tplink_tl-wdr6500-v2
   SOC := qca9561
   DEVICE_MODEL := TL-WDR6500
   DEVICE_VARIANT := v2
-  DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev \
+  DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport \
 	kmod-ath9k kmod-ath10k-ct ath10k-firmware-qca988x-ct
   IMAGE_SIZE := 8000k
   KERNEL := kernel-bin | append-dtb | lzma | uImage lzma

target/linux/bcm53xx/image/Makefile

@@ -424,8 +424,7 @@ define Device/meraki_mx6x
   KERNEL_IN_UBI := 1
   KERNEL_LOADADDR := 0x60008000
   DEVICE_PACKAGES := -oseama kmod-leds-pwm kmod-usb-ehci \
-	kmod-usb-ohci kmod-usb2 \
+	kmod-usb-ohci kmod-usb2
-	kmod-ledtrig-default-on kmod-ledtrig-netdev
   DEVICE_VENDOR := Cisco Meraki
   KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
   KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb

target/linux/generic/backport-6.6/780-22-v6.12-r8169-add-support-for-RTL8126A-rev.b.patch

@@ -1,7 +1,7 @@
 From 69cb89981c7a181d857b634c0740e914d5df79ea Mon Sep 17 00:00:00 2001
 From: ChunHao Lin <hau@realtek.com>
 Date: Fri, 30 Aug 2024 10:18:10 +0800
-Subject: [PATCH 43/47] r8169: add support for RTL8126A rev.b
+Subject: [PATCH] r8169: add support for RTL8126A rev.b
 
 Add support for RTL8126A rev.b. Its XID is 0x64a. It is basically
 based on the one with XID 0x649, but with different firmware file.

target/linux/generic/backport-6.6/780-23-v6.12-r8169-add-missing-MODULE_FIRMWARE-entry-for-RTL8126A.patch

@@ -1,8 +1,7 @@
 From 3b067536daa4842adbf685accf47c899a26367d3 Mon Sep 17 00:00:00 2001
 From: Heiner Kallweit <hkallweit1@gmail.com>
 Date: Wed, 18 Sep 2024 20:45:15 +0200
-Subject: [PATCH 47/47] r8169: add missing MODULE_FIRMWARE entry for RTL8126A
+Subject: [PATCH] r8169: add missing MODULE_FIRMWARE entry for RTL8126A rev.b
- rev.b
 
 Add a missing MODULE_FIRMWARE entry.
 

target/linux/generic/backport-6.6/780-24-v6.12-r8169-avoid-unsolicited-interrupts.patch

@@ -0,0 +1,39 @@
+From 10ce0db787004875f4dba068ea952207d1d8abeb Mon Sep 17 00:00:00 2001
+From: Heiner Kallweit <hkallweit1@gmail.com>
+Date: Fri, 18 Oct 2024 11:08:16 +0200
+Subject: [PATCH] r8169: avoid unsolicited interrupts
+
+It was reported that after resume from suspend a PCI error is logged
+and connectivity is broken. Error message is:
+PCI error (cmd = 0x0407, status_errs = 0x0000)
+The message seems to be a red herring as none of the error bits is set,
+and the PCI command register value also is normal. Exception handling
+for a PCI error includes a chip reset what apparently brakes connectivity
+here. The interrupt status bit triggering the PCI error handling isn't
+actually used on PCIe chip versions, so it's not clear why this bit is
+set by the chip. Fix this by ignoring this bit on PCIe chip versions.
+
+Fixes: 0e4851502f84 ("r8169: merge with version 8.001.00 of Realtek's r8168 driver")
+Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219388
+Tested-by: Atlas Yu <atlas.yu@canonical.com>
+Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
+Reviewed-by: Simon Horman <horms@kernel.org>
+Link: https://patch.msgid.link/78e2f535-438f-4212-ad94-a77637ac6c9c@gmail.com
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ drivers/net/ethernet/realtek/r8169_main.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/ethernet/realtek/r8169_main.c
++++ b/drivers/net/ethernet/realtek/r8169_main.c
+@@ -4683,7 +4683,9 @@ static irqreturn_t rtl8169_interrupt(int
+ 	if ((status & 0xffff) == 0xffff || !(status & tp->irq_mask))
+ 		return IRQ_NONE;
+ 
+-	if (unlikely(status & SYSErr)) {
++	/* At least RTL8168fp may unexpectedly set the SYSErr bit */
++	if (unlikely(status & SYSErr &&
++	    tp->mac_version <= RTL_GIGA_MAC_VER_06)) {
+ 		rtl8169_pcierr_interrupt(tp->dev);
+ 		goto out;
+ 	}

target/linux/generic/config-6.6

@@ -1393,6 +1393,7 @@ CONFIG_DMA_DECLARE_COHERENT=y
 CONFIG_DMA_NONCOHERENT_MMAP=y
 # CONFIG_DMA_RESTRICTED_POOL is not set
 # CONFIG_DMA_SHARED_BUFFER is not set
+# CONFIG_DM_AUDIT is not set
 # CONFIG_DM_CACHE is not set
 # CONFIG_DM_CLONE is not set
 # CONFIG_DM_DEBUG is not set

target/linux/generic/files/drivers/mtd/mtdsplit/mtdsplit_minor.c

@@ -34,7 +34,9 @@
 #define YAFFS_OBJECT_TYPE_FILE	0x1
 #define YAFFS_OBJECTID_ROOT	0x1
 #define YAFFS_SUM_UNUSED	0xFFFF
-#define YAFFS_NAME		"kernel"
+#define YAFFS_MAX_NAME_LENGTH	127
+#define YAFFS_NAME_KERNEL	"kernel"
+#define YAFFS_NAME_BOOTIMAGE	"bootimage"
 
 #define MINOR_NR_PARTS		2
 
@@ -46,7 +48,7 @@ struct minor_header {
 	int yaffs_type;
 	int yaffs_obj_id;
 	u16 yaffs_sum_unused;
-	char yaffs_name[sizeof(YAFFS_NAME)];
+	char yaffs_name[YAFFS_MAX_NAME_LENGTH];
 };
 
 static int mtdsplit_parse_minor(struct mtd_info *master,
@@ -61,29 +63,44 @@ static int mtdsplit_parse_minor(struct mtd_info *master,
 
 	hdr_len = sizeof(hdr);
 	err = mtd_read(master, 0, hdr_len, &retlen, (void *) &hdr);
-	if (err)
+	if (err) {
+		pr_err("MiNOR mtd_read error: %d\n", err);
 		return err;
+	}
 
-	if (retlen != hdr_len)
+	if (retlen != hdr_len) {
+		pr_err("MiNOR mtd_read too short\n");
 		return -EIO;
+	}
 
 	/* match header */
-	if (hdr.yaffs_type != YAFFS_OBJECT_TYPE_FILE)
+	if (hdr.yaffs_type != YAFFS_OBJECT_TYPE_FILE) {
-		return -EINVAL;
+		pr_info("MiNOR YAFFS first type not matched\n");
+		return 0;
+	}
 
-	if (hdr.yaffs_obj_id != YAFFS_OBJECTID_ROOT)
+	if (hdr.yaffs_obj_id != YAFFS_OBJECTID_ROOT) {
-		return -EINVAL;
+		pr_info("MiNOR YAFFS first objectid not matched\n");
+		return 0;
+	}
 
-	if (hdr.yaffs_sum_unused != YAFFS_SUM_UNUSED)
+	if (hdr.yaffs_sum_unused != YAFFS_SUM_UNUSED) {
-		return -EINVAL;
+		pr_info("MiNOR YAFFS first sum not matched\n");
+		return 0;
+	}
 
-	if (memcmp(hdr.yaffs_name, YAFFS_NAME, sizeof(YAFFS_NAME)))
+	if ((memcmp(hdr.yaffs_name, YAFFS_NAME_KERNEL, sizeof(YAFFS_NAME_KERNEL))) &&
-		return -EINVAL;
+	    (memcmp(hdr.yaffs_name, YAFFS_NAME_BOOTIMAGE, sizeof(YAFFS_NAME_BOOTIMAGE)))) {
+		pr_info("MiNOR YAFFS first name not matched\n");
+		return 0;
+	}
 
 	err = mtd_find_rootfs_from(master, master->erasesize, master->size,
 				   &rootfs_offset, NULL);
-	if (err)
+	if (err) {
-		return err;
+		pr_info("MiNOR mtd_find_rootfs_from error: %d\n", err);
+		return 0;
+	}
 
 	parts = kzalloc(MINOR_NR_PARTS * sizeof(*parts), GFP_KERNEL);
 	if (!parts)

target/linux/generic/pending-6.6/736-net-ethernet-mtk_wed-fix-path-of-MT7988-WO-firmware.patch

@@ -0,0 +1,59 @@
+From patchwork Sat Oct 26 13:52:25 2024
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
+X-Patchwork-Id: 13852245
+X-Patchwork-Delegate: kuba@kernel.org
+Date: Sat, 26 Oct 2024 14:52:25 +0100
+From: Daniel Golle <daniel@makrotopia.org>
+To: linux-mediatek@lists.infradead.org,
+	linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
+	netdev@vger.kernel.org, Sujuan Chen <sujuan.chen@mediatek.com>,
+	AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>,
+	Matthias Brugger <matthias.bgg@gmail.com>,
+	Paolo Abeni <pabeni@redhat.com>, Jakub Kicinski <kuba@kernel.org>,
+	Eric Dumazet <edumazet@google.com>,
+	"David S. Miller" <davem@davemloft.net>,
+	Andrew Lunn <andrew+netdev@lunn.ch>,
+	Lorenzo Bianconi <lorenzo@kernel.org>,
+	Mark Lee <Mark-MC.Lee@mediatek.com>,
+	Sean Wang <sean.wang@mediatek.com>, Felix Fietkau <nbd@nbd.name>,
+	John Crispin <john@phrozen.org>
+Subject: [PATCH net] net: ethernet: mtk_wed: fix path of MT7988 WO firmware
+Message-ID: <Zxz0GWTR5X5LdWPe@pidgin.makrotopia.org>
+Precedence: bulk
+X-Mailing-List: netdev@vger.kernel.org
+List-Id: <netdev.vger.kernel.org>
+List-Subscribe: <mailto:netdev+subscribe@vger.kernel.org>
+List-Unsubscribe: <mailto:netdev+unsubscribe@vger.kernel.org>
+MIME-Version: 1.0
+Content-Disposition: inline
+X-Patchwork-Delegate: kuba@kernel.org
+
+linux-firmware commit 808cba84 ("mtk_wed: add firmware for mt7988
+Wireless Ethernet Dispatcher") added mt7988_wo_{0,1}.bin in the
+'mediatek/mt7988' directory while driver current expects the files in
+the 'mediatek' directory.
+
+Change path in the driver header now that the firmware has been added.
+
+Fixes: e2f64db13aa1 ("net: ethernet: mtk_wed: introduce WED support for MT7988")
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+---
+ drivers/net/ethernet/mediatek/mtk_wed_wo.h | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/ethernet/mediatek/mtk_wed_wo.h
++++ b/drivers/net/ethernet/mediatek/mtk_wed_wo.h
+@@ -91,8 +91,8 @@ enum mtk_wed_dummy_cr_idx {
+ #define MT7981_FIRMWARE_WO	"mediatek/mt7981_wo.bin"
+ #define MT7986_FIRMWARE_WO0	"mediatek/mt7986_wo_0.bin"
+ #define MT7986_FIRMWARE_WO1	"mediatek/mt7986_wo_1.bin"
+-#define MT7988_FIRMWARE_WO0	"mediatek/mt7988_wo_0.bin"
+-#define MT7988_FIRMWARE_WO1	"mediatek/mt7988_wo_1.bin"
++#define MT7988_FIRMWARE_WO0	"mediatek/mt7988/mt7988_wo_0.bin"
++#define MT7988_FIRMWARE_WO1	"mediatek/mt7988/mt7988_wo_1.bin"
+ 
+ #define MTK_WO_MCU_CFG_LS_BASE				0
+ #define MTK_WO_MCU_CFG_LS_HW_VER_ADDR			(MTK_WO_MCU_CFG_LS_BASE + 0x000)

target/linux/ipq40xx/image/generic.mk

@@ -1146,7 +1146,7 @@ define Device/teltonika_rutx50
 	PAGESIZE := 2048
 	FILESYSTEMS := squashfs
 	IMAGE/factory.ubi := append-ubi
-	DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
+	DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 endef
 TARGET_DEVICES += teltonika_rutx50
 

target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8068-mr52.dts

@@ -48,12 +48,12 @@
 
 		lan1_green {
 			label = "green:lan1";
-			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
 		};
 
 		lan2_green {
 			label = "green:lan2";
-			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
 		};
 
 		led_active: active {
@@ -63,12 +63,12 @@
 
 		lan1_orange {
 			label = "orange:lan1";
-			gpios = <&qcom_pinmux 60 GPIO_ACTIVE_HIGH>;
+			gpios = <&qcom_pinmux 62 GPIO_ACTIVE_HIGH>;
 		};
 
 		lan2_orange {
 			label = "orange:lan2";
-			gpios = <&qcom_pinmux 62 GPIO_ACTIVE_HIGH>;
+			gpios = <&qcom_pinmux 60 GPIO_ACTIVE_HIGH>;
 		};
 	};
 };

target/linux/kirkwood/files-6.6/arch/arm/boot/dts/marvell/kirkwood-dns320l.dts

@@ -37,6 +37,17 @@
 		stdout-path = &uart0;
 	};
 
+	gpio-export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		mcu_power {
+			gpio-export,name = "mcu_power";
+			gpio-export,input = <0>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;

target/linux/kirkwood/patches-6.6/118-dns-320l.patch

@@ -24,7 +24,7 @@
  	chosen {
  		bootargs = "console=ttyS0,115200n8 earlyprintk";
  		stdout-path = &uart0;
-@@ -68,7 +75,7 @@
+@@ -79,7 +86,7 @@
  			linux,default-trigger = "usbport";
  		};
  

target/linux/layerscape/image/armv7.mk

@@ -31,7 +31,7 @@ define Device/fsl_ls1021a-twr
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := TWR-LS1021A
   DEVICE_VARIANT := Default
-  DEVICE_PACKAGES += layerscape-rcw
+  DEVICE_PACKAGES += ~layerscape-rcw
   IMAGE/firmware.bin := \
     ls-clean | \
     ls-append $(1)-rcw.bin | pad-to 1M | \

target/linux/layerscape/image/armv8_64b.mk

@@ -30,7 +30,7 @@ define Device/fsl_ls1012a-frdm
   DEVICE_MODEL := FRDM-LS1012A
   DEVICE_PACKAGES += \
     layerscape-ppfe \
-    trusted-firmware-a-ls1012a-frdm \
+    ~trusted-firmware-a-ls1012a-frdm \
     kmod-ppfe
   BLOCKSIZE := 256KiB
   IMAGE/firmware.bin := \
@@ -56,7 +56,7 @@ define Device/fsl_ls1012a-rdb
   DEVICE_MODEL := LS1012A-RDB
   DEVICE_PACKAGES += \
     layerscape-ppfe \
-    trusted-firmware-a-ls1012a-rdb \
+    ~trusted-firmware-a-ls1012a-rdb \
     kmod-hwmon-ina2xx \
     kmod-iio-fxas21002c-i2c \
     kmod-iio-fxos8700-i2c \
@@ -80,7 +80,7 @@ define Device/fsl_ls1012a-frwy-sdboot
   DEVICE_MODEL := FRWY-LS1012A
   DEVICE_PACKAGES += \
     layerscape-ppfe \
-    trusted-firmware-a-ls1012a-frwy-sdboot \
+    ~trusted-firmware-a-ls1012a-frwy-sdboot \
     kmod-ppfe
   DEVICE_DTS := fsl-ls1012a-frwy
   IMAGES += firmware.bin
@@ -105,7 +105,7 @@ define Device/fsl_ls1028a-rdb
   DEVICE_VARIANT := Default
   KERNEL = kernel-bin | gzip | fit gzip $$(DEVICE_DTS_DIR)/$$(DEVICE_DTS).dtb
   DEVICE_PACKAGES += \
-    trusted-firmware-a-ls1028a-rdb \
+    ~trusted-firmware-a-ls1028a-rdb \
     kmod-hwmon-ina2xx \
     kmod-hwmon-lm90 \
     kmod-rtc-pcf2127
@@ -130,7 +130,7 @@ define Device/fsl_ls1028a-rdb-sdboot
   DEVICE_VARIANT := SD Card Boot
   DEVICE_DTS := fsl-ls1028a-rdb
   DEVICE_PACKAGES += \
-    trusted-firmware-a-ls1028a-rdb-sdboot \
+    ~trusted-firmware-a-ls1028a-rdb-sdboot \
     kmod-hwmon-ina2xx \
     kmod-hwmon-lm90 \
     kmod-rtc-pcf2127
@@ -151,9 +151,8 @@ define Device/fsl_ls1043a-rdb
   DEVICE_MODEL := LS1043A-RDB
   DEVICE_VARIANT := Default
   DEVICE_PACKAGES += \
-    layerscape-fman \
+    ~layerscape-fman \
-    trusted-firmware-a-ls1043a-rdb \
+    ~trusted-firmware-a-ls1043a-rdb \
-    fmc fmc-eth-config \
     kmod-ahci-qoriq \
     kmod-hwmon-ina2xx \
     kmod-hwmon-lm90
@@ -176,9 +175,8 @@ define Device/fsl_ls1043a-rdb-sdboot
   DEVICE_MODEL := LS1043A-RDB
   DEVICE_VARIANT := SD Card Boot
   DEVICE_PACKAGES += \
-    layerscape-fman \
+    ~layerscape-fman \
-    trusted-firmware-a-ls1043a-rdb-sdboot \
+    ~trusted-firmware-a-ls1043a-rdb-sdboot \
-    fmc fmc-eth-config \
     kmod-ahci-qoriq \
     kmod-hwmon-ina2xx \
     kmod-hwmon-lm90
@@ -200,8 +198,8 @@ define Device/fsl_ls1046a-frwy
   DEVICE_MODEL := FRWY-LS1046A
   DEVICE_VARIANT := Default
   DEVICE_PACKAGES += \
-    layerscape-fman \
+    ~layerscape-fman \
-    trusted-firmware-a-ls1046a-frwy
+    ~trusted-firmware-a-ls1046a-frwy
   IMAGE/firmware.bin := \
     ls-clean | \
     ls-append $(1)-bl2.pbl | pad-to 1M | \
@@ -220,8 +218,8 @@ define Device/fsl_ls1046a-frwy-sdboot
   DEVICE_MODEL := FRWY-LS1046A
   DEVICE_VARIANT := SD Card Boot
   DEVICE_PACKAGES += \
-    layerscape-fman \
+    ~layerscape-fman \
-    trusted-firmware-a-ls1046a-frwy-sdboot
+    ~trusted-firmware-a-ls1046a-frwy-sdboot
   DEVICE_DTS := fsl-ls1046a-frwy
   IMAGE/sdcard.img.gz := \
     ls-clean | \
@@ -241,9 +239,8 @@ define Device/fsl_ls1046a-rdb
   DEVICE_MODEL := LS1046A-RDB
   DEVICE_VARIANT := Default
   DEVICE_PACKAGES += \
-    layerscape-fman \
+    ~layerscape-fman \
-    trusted-firmware-a-ls1046a-rdb \
+    ~trusted-firmware-a-ls1046a-rdb \
-    fmc fmc-eth-config \
     kmod-ahci-qoriq \
     kmod-hwmon-ina2xx \
     kmod-hwmon-lm90
@@ -266,9 +263,8 @@ define Device/fsl_ls1046a-rdb-sdboot
   DEVICE_MODEL := LS1046A-RDB
   DEVICE_VARIANT := SD Card Boot
   DEVICE_PACKAGES += \
-    layerscape-fman \
+    ~layerscape-fman \
-    trusted-firmware-a-ls1046a-rdb-sdboot \
+    ~trusted-firmware-a-ls1046a-rdb-sdboot \
-    fmc fmc-eth-config \
     kmod-ahci-qoriq \
     kmod-hwmon-ina2xx \
     kmod-hwmon-lm90
@@ -291,9 +287,9 @@ define Device/fsl_ls1088a-rdb
   DEVICE_MODEL := LS1088A-RDB
   DEVICE_VARIANT := Default
   DEVICE_PACKAGES += \
-    layerscape-mc \
+    ~layerscape-mc \
-    layerscape-dpl \
+    ~layerscape-dpl \
-    trusted-firmware-a-ls1088a-rdb \
+    ~trusted-firmware-a-ls1088a-rdb \
     restool \
     kmod-ahci-qoriq \
     kmod-hwmon-ina2xx \
@@ -319,9 +315,9 @@ define Device/fsl_ls1088a-rdb-sdboot
   DEVICE_MODEL := LS1088A-RDB
   DEVICE_VARIANT := SD Card Boot
   DEVICE_PACKAGES += \
-    layerscape-mc \
+    ~layerscape-mc \
-    layerscape-dpl \
+    ~layerscape-dpl \
-    trusted-firmware-a-ls1088a-rdb-sdboot \
+    ~trusted-firmware-a-ls1088a-rdb-sdboot \
     restool \
     kmod-ahci-qoriq \
     kmod-hwmon-ina2xx \
@@ -346,9 +342,9 @@ define Device/fsl_ls2088a-rdb
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := LS2088ARDB
   DEVICE_PACKAGES += \
-    layerscape-mc \
+    ~layerscape-mc \
-    layerscape-dpl \
+    ~layerscape-dpl \
-    trusted-firmware-a-ls2088a-rdb \
+    ~trusted-firmware-a-ls2088a-rdb \
     restool \
     kmod-ahci-qoriq
   IMAGE/firmware.bin := \
@@ -370,10 +366,10 @@ define Device/fsl_lx2160a-rdb
   DEVICE_MODEL := LX2160A-RDB
   DEVICE_VARIANT := Rev2.0 silicon
   DEVICE_PACKAGES += \
-    layerscape-mc \
+    ~layerscape-mc \
-    layerscape-dpl \
+    ~layerscape-dpl \
-    layerscape-ddr-phy \
+    ~layerscape-ddr-phy \
-    trusted-firmware-a-lx2160a-rdb \
+    ~trusted-firmware-a-lx2160a-rdb \
     restool
   IMAGE/firmware.bin := \
     ls-clean | \
@@ -396,10 +392,10 @@ define Device/fsl_lx2160a-rdb-sdboot
   DEVICE_MODEL := LX2160A-RDB
   DEVICE_VARIANT := Rev2.0 silicon SD Card Boot
   DEVICE_PACKAGES += \
-    layerscape-mc \
+    ~layerscape-mc \
-    layerscape-dpl \
+    ~layerscape-dpl \
-    layerscape-ddr-phy \
+    ~layerscape-ddr-phy \
-    trusted-firmware-a-lx2160a-rdb-sdboot \
+    ~trusted-firmware-a-lx2160a-rdb-sdboot \
     restool
   DEVICE_DTS := fsl-lx2160a-rdb
   IMAGE/sdcard.img.gz := \

target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a.dtsi

@@ -195,6 +195,32 @@
 			reg = <0 0x43000000 0 0x50000>;
 			no-map;
 		};
+
+		wmcpu_emi: wmcpu-reserved@47cc0000 {
+			reg = <0 0x47cc0000 0 0x00100000>;
+			no-map;
+		};
+
+		wo_emi0: wo-emi@4f600000 {
+			reg = <0 0x4f600000 0 0x40000>;
+			no-map;
+		};
+
+		wo_emi1: wo-emi@4f640000 {
+			reg = <0 0x4f640000 0 0x40000>;
+			no-map;
+		};
+
+		wo_emi2: wo-emi@4f680000 {
+			reg = <0 0x4f680000 0 0x40000>;
+			no-map;
+		};
+
+		wo_data: wo-data@4f700000 {
+			reg = <0 0x4f700000 0 0x800000>;
+			no-map;
+			shared = <1>;
+		};
 	};
 
 	soc {
@@ -1218,6 +1244,48 @@
 			#size-cells = <1>;
 		};
 
+		wed0: wed@15010000 {
+			compatible = "mediatek,mt7988-wed",
+				     "syscon";
+			reg = <0 0x15010000 0 0x2000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&wo_emi0>, <&wo_data>;
+			memory-region-names = "wo-emi", "wo-data";
+			mediatek,wo-ccif = <&wo_ccif0>;
+			mediatek,wo-ilm = <&wo_ilm0>;
+			mediatek,wo-dlm = <&wo_dlm0>;
+			mediatek,wo-cpuboot = <&wo_cpuboot0>;
+		};
+
+		wed1: wed@15012000 {
+			compatible = "mediatek,mt7988-wed",
+				     "syscon";
+			reg = <0 0x15012000 0 0x2000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&wo_emi1>, <&wo_data>;
+			memory-region-names = "wo-emi", "wo-data";
+			mediatek,wo-ccif = <&wo_ccif1>;
+			mediatek,wo-ilm = <&wo_ilm1>;
+			mediatek,wo-dlm = <&wo_dlm1>;
+			mediatek,wo-cpuboot = <&wo_cpuboot1>;
+		};
+
+		wed2: wed@15014000 {
+			compatible = "mediatek,mt7988-wed",
+				     "syscon";
+			reg = <0 0x15014000 0 0x2000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&wo_emi2>, <&wo_data>;
+			memory-region-names = "wo-emi", "wo-data";
+			mediatek,wo-ccif = <&wo_ccif2>;
+			mediatek,wo-ilm = <&wo_ilm2>;
+			mediatek,wo-dlm = <&wo_dlm2>;
+			mediatek,wo-cpuboot = <&wo_cpuboot2>;
+		};
+
 		switch: switch@15020000 {
 			compatible = "mediatek,mt7988-switch";
 			reg = <0 0x15020000 0 0x8000>;
@@ -1449,6 +1517,7 @@
 						 <&apmixedsys CLK_APMIXED_SGMPLL>;
 			mediatek,ethsys = <&ethsys>;
 			mediatek,infracfg = <&topmisc>;
+			mediatek,wed = <&wed0>, <&wed1>, <&wed2>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
@@ -1511,6 +1580,72 @@
 			};
 		};
 
+		wo_ccif0: syscon@151a5000 {
+			compatible = "mediatek,mt7988-wo-ccif", "syscon";
+			reg = <0 0x151a5000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		wo_ccif1: syscon@152a5000 {
+			compatible = "mediatek,mt7988-wo-ccif", "syscon";
+			reg = <0 0x152a5000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		wo_ccif2: syscon@153a5000 {
+			compatible = "mediatek,mt7988-wo-ccif", "syscon";
+			reg = <0 0x153a5000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		wo_ilm0: syscon@151e0000 {
+			compatible = "mediatek,mt7988-wo-ilm", "syscon";
+			reg = <0 0x151e0000 0 0x8000>;
+		};
+
+		wo_ilm1: syscon@152e0000 {
+			compatible = "mediatek,mt7988-wo-ilm", "syscon";
+			reg = <0 0x152e0000 0 0x8000>;
+		};
+
+		wo_ilm2: syscon@153e0000 {
+			compatible = "mediatek,mt7988-wo-ilm", "syscon";
+			reg = <0 0x153e0000 0 0x8000>;
+		};
+
+		wo_dlm0: syscon@151e8000 {
+			compatible = "mediatek,mt7988-wo-dlm", "syscon";
+			reg = <0 0x151e8000 0 0x2000>;
+		};
+
+		wo_dlm1: syscon@152e8000 {
+			compatible = "mediatek,mt7988-wo-dlm", "syscon";
+			reg = <0 0x152e8000 0 0x2000>;
+		};
+
+		wo_dlm2: syscon@153e8000 {
+			compatible = "mediatek,mt7988-wo-dlm", "syscon";
+			reg = <0 0x153e8000 0 0x2000>;
+		};
+
+		wo_cpuboot0: syscon@15194000 {
+			compatible = "mediatek,mt7988-wo-cpuboot", "syscon";
+			reg = <0 0x15194000 0 0x1000>;
+		};
+
+		wo_cpuboot1: syscon@15294000 {
+			compatible = "mediatek,mt7988-wo-cpuboot", "syscon";
+			reg = <0 0x15294000 0 0x1000>;
+		};
+
+		wo_cpuboot2: syscon@15394000 {
+			compatible = "mediatek,mt7988-wo-cpuboot", "syscon";
+			reg = <0 0x15394000 0 0x1000>;
+		};
+
 		crypto: crypto@15600000 {
 			compatible = "inside-secure,safexcel-eip197b";
 			reg = <0 0x15600000 0 0x180000>;

target/linux/mvebu/image/cortexa9.mk

@@ -444,6 +444,6 @@ define Device/synology_ds213j
   DEVICE_PACKAGES := \
     kmod-rtc-s35390a kmod-hwmon-gpiofan kmod-hwmon-drivetemp \
     kmod-md-raid0 kmod-md-raid1 kmod-md-mod e2fsprogs mdadm \
-    -ppp -kmod-nft-offload -firewall4 -dnsmasq -odhcpd-ipv6only
+    -ppp -kmod-nft-offload -dnsmasq -odhcpd-ipv6only
 endef
 TARGET_DEVICES += synology_ds213j

target/linux/mxs/image/Makefile

@@ -46,8 +46,8 @@ endef
 define Device/i2se_duckbill
   DEVICE_VENDOR := I2SE
   DEVICE_MODEL := Duckbill
-  DEVICE_PACKAGES := -dnsmasq -firewall -ppp -ip6tables -iptables -6relayd -mtd \
+  DEVICE_PACKAGES := -dnsmasq -ppp -ip6tables -iptables -mtd \
-		     uboot-envtools kmod-leds-gpio -kmod-ipt-nathelper
+		     uboot-envtools kmod-leds-gpio -kmod-nf-nathelper
   SUPPORTED_DEVICES:=i2se,duckbill
   SOC:=imx28
   DEVICE_DTS:=imx28-duckbill

target/linux/ramips/dts/mt7621_sercomm_na502.dts

@@ -193,7 +193,7 @@
 	status = "okay";
 };
 
-&pcie0 {
+&pcie1 {
 	wifi@0,0 {
 		compatible = "mediatek,mt76";
 		reg = <0x0000 0 0 0 0>;
@@ -203,7 +203,7 @@
 	};
 };
 
-&pcie1 {
+&pcie2 {
 	wifi@0,0 {
 		compatible = "mediatek,mt76";
 		reg = <0x0 0 0 0 0>;

target/linux/ramips/dts/mt7621_sercomm_na502s.dts

@@ -297,7 +297,7 @@
 	status = "okay";
 };
 
-&pcie0 {
+&pcie1 {
 	wifi@0,0 {
 		compatible = "mediatek,mt76";
 		reg = <0x0000 0 0 0 0>;
@@ -307,7 +307,7 @@
 	};
 };
 
-&pcie1 {
+&pcie2 {
 	wifi@0,0 {
 		compatible = "mediatek,mt76";
 		reg = <0x0 0 0 0 0>;

target/linux/ramips/dts/mt7628an_mediatek_linkit-smart-7688.dts

@@ -22,12 +22,6 @@
 		serial0 = &uart2;
 	};
 
-	bootstrap {
-		compatible = "mediatek,linkit";
-
-		status = "okay";
-	};
-
 	leds {
 		compatible = "gpio-leds";
 
@@ -144,6 +138,15 @@
 	};
 };
 
+&gpio {
+	bootstrap {
+		gpio-hog;
+		line-name = "bootstrap";
+		output-low;
+		gpios = <11 GPIO_ACTIVE_LOW>;
+	};
+};
+
 &i2c {
 	status = "okay";
 };

target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3050.c

@@ -1396,7 +1396,7 @@ static int esw_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	esw->dev = &pdev->dev;
-	esw->irq = irq_of_parse_and_map(np, 0);
+	esw->irq = platform_get_irq(pdev, 0);
 	esw->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(esw->base))
 		return PTR_ERR(esw->base);

target/linux/ramips/image/Makefile

@@ -140,7 +140,7 @@ define Build/sign-dlink-ru
 endef
 
 define Build/trx
-	$(STAGING_DIR_HOST)/bin/trx $(1) \
+	-$(STAGING_DIR_HOST)/bin/trx $(1) \
 		-o $@ \
 		-m $$(($(call exp_units,$(IMAGE_SIZE)))) \
 		-f $(IMAGE_KERNEL) \

target/linux/ramips/image/mt7621.mk

@@ -404,7 +404,7 @@ define Device/asus_rp-ac56
   DEVICE_MODEL := RP-AC56
   IMAGE_SIZE := 16000k
   DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 \
-	kmod-i2c-ralink kmod-sound-mt7620 -uboot-envtools
+	kmod-sound-mt7620 -uboot-envtools
   IMAGES += factory.bin
   IMAGE/factory.bin := append-kernel | append-rootfs | pad-rootfs | check-size
   IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \

target/linux/ramips/patches-6.6/845-pwm-add-mediatek-support.patch

@@ -41,7 +41,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  obj-$(CONFIG_PWM_MXS)		+= pwm-mxs.o
 --- /dev/null
 +++ b/drivers/pwm/pwm-mediatek-ramips.c
-@@ -0,0 +1,197 @@
+@@ -0,0 +1,187 @@
 +/*
 + * Mediatek Pulse Width Modulator driver
 + *
@@ -178,30 +178,23 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +static int mtk_pwm_probe(struct platform_device *pdev)
 +{
 +	struct mtk_pwm_chip *pc;
-+	struct resource *r;
-+	int ret;
 +
 +	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
 +	if (!pc)
 +		return -ENOMEM;
 +
-+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	pc->mmio_base = devm_platform_ioremap_resource(pdev, 0);
-+	pc->mmio_base = devm_ioremap_resource(&pdev->dev, r);
 +	if (IS_ERR(pc->mmio_base))
 +		return PTR_ERR(pc->mmio_base);
 +
-+	platform_set_drvdata(pdev, pc);
-+
 +	pc->chip.dev = &pdev->dev;
 +	pc->chip.ops = &mtk_pwm_ops;
 +	pc->chip.base = -1;
 +	pc->chip.npwm = NUM_PWM;
 +
-+	ret = pwmchip_add(&pc->chip);
++	platform_set_drvdata(pdev, pc);
-+	if (ret < 0)
-+		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
 +
-+	return ret;
++	return devm_pwmchip_add(&pdev->dev, &pc->chip);
 +}
 +
 +static int mtk_pwm_remove(struct platform_device *pdev)
@@ -212,8 +205,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +	for (i = 0; i < NUM_PWM; i++)
 +		pwm_disable(&pc->chip.pwms[i]);
 +
-+	pwmchip_remove(&pc->chip);
-+
 +	return 0;
 +}
 +
@@ -227,7 +218,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +static struct platform_driver mtk_pwm_driver = {
 +	.driver = {
 +		.name = "mtk-pwm",
-+		.owner = THIS_MODULE,
 +		.of_match_table = mtk_pwm_of_match,
 +	},
 +	.probe = mtk_pwm_probe,

target/linux/ramips/patches-6.6/855-linkit_bootstrap.patch

@@ -1,97 +0,0 @@
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -52,6 +52,7 @@ obj-$(CONFIG_ECHO)		+= echo/
- obj-$(CONFIG_CXL_BASE)		+= cxl/
- obj-$(CONFIG_DW_XDATA_PCIE)	+= dw-xdata-pcie.o
- obj-$(CONFIG_PCI_ENDPOINT_TEST)	+= pci_endpoint_test.o
-+obj-$(CONFIG_SOC_MT7620)	+= linkit.o
- obj-$(CONFIG_OCXL)		+= ocxl/
- obj-$(CONFIG_BCM_VK)		+= bcm-vk/
- obj-y				+= cardreader/
---- /dev/null
-+++ b/drivers/misc/linkit.c
-@@ -0,0 +1,84 @@
-+/*
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  publishhed by the Free Software Foundation.
-+ *
-+ *  Copyright (C) 2015 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/of.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/gpio.h>
-+
-+#define LINKIT_LATCH_GPIO	11
-+
-+struct linkit_hw_data {
-+	char board[16];
-+	char rev[16];
-+};
-+
-+static void sanify_string(char *s)
-+{
-+	int i;
-+
-+	for (i = 0; i < 15; i++)
-+		if (s[i] <= 0x20)
-+			s[i] = '\0';
-+	s[15] = '\0';
-+}
-+
-+static int linkit_probe(struct platform_device *pdev)
-+{
-+	struct linkit_hw_data hw;
-+	struct mtd_info *mtd;
-+	size_t retlen;
-+	int ret;
-+
-+	mtd = get_mtd_device_nm("factory");
-+	if (IS_ERR(mtd))
-+		return PTR_ERR(mtd);
-+
-+	ret = mtd_read(mtd, 0x400, sizeof(hw), &retlen, (u_char *) &hw);
-+	put_mtd_device(mtd);
-+
-+	sanify_string(hw.board);
-+	sanify_string(hw.rev);
-+
-+	dev_info(&pdev->dev, "Version  : %s\n", hw.board);
-+	dev_info(&pdev->dev, "Revision : %s\n", hw.rev);
-+
-+	if (!strcmp(hw.board, "LINKITS7688")) {
-+		dev_info(&pdev->dev, "setting up bootstrap latch\n");
-+
-+		if (devm_gpio_request(&pdev->dev, LINKIT_LATCH_GPIO, "bootstrap")) {
-+			dev_err(&pdev->dev, "failed to setup bootstrap gpio\n");
-+			return -1;
-+		}
-+		gpio_direction_output(LINKIT_LATCH_GPIO, 0);
-+	}
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id linkit_match[] = {
-+	{ .compatible = "mediatek,linkit" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, linkit_match);
-+
-+static struct platform_driver linkit_driver = {
-+	.probe = linkit_probe,
-+	.driver = {
-+		.name = "mtk-linkit",
-+		.owner = THIS_MODULE,
-+		.of_match_table = linkit_match,
-+	},
-+};
-+
-+int __init linkit_init(void)
-+{
-+	return platform_driver_register(&linkit_driver);
-+}
-+late_initcall_sync(linkit_init);

target/linux/realtek/dts/rtl9302_zyxel_xgs1250-12.dts

@@ -310,7 +310,6 @@
 			compatible = "ethernet-phy-ieee802.3-c22";
 			phy-is-integrated;
 			reg = <27>;
-			rtl9300,smi-address = <4 0>;
 			sds = < 9 >;
 		};
 

target/linux/realtek/files-6.6/drivers/net/dsa/rtl83xx/dsa.c

@@ -684,6 +684,7 @@ static void rtl83xx_phylink_get_caps(struct dsa_switch *ds, int port,
 	__set_bit(PHY_INTERFACE_MODE_QSGMII, config->supported_interfaces);
 	__set_bit(PHY_INTERFACE_MODE_SGMII, config->supported_interfaces);
 	__set_bit(PHY_INTERFACE_MODE_XGMII, config->supported_interfaces);
+	__set_bit(PHY_INTERFACE_MODE_USXGMII, config->supported_interfaces);
 	__set_bit(PHY_INTERFACE_MODE_1000BASEX, config->supported_interfaces);
 }
 

target/linux/realtek/files-6.6/drivers/net/dsa/rtl83xx/rtl839x.c

@@ -662,7 +662,7 @@ int rtl839x_read_phy(u32 port, u32 page, u32 reg, u32 *val)
 	u32 v;
 	int err = 0;
 
-	if (port > 63 || page > 4095 || reg > 31)
+	if (port > 63 || page > 8191 || reg > 31)
 		return -ENOTSUPP;
 
 	/* Take bug on RTL839x Rev <= C into account */
@@ -698,7 +698,7 @@ int rtl839x_write_phy(u32 port, u32 page, u32 reg, u32 val)
 	int err = 0;
 
 	val &= 0xffff;
-	if (port > 63 || page > 4095 || reg > 31)
+	if (port > 63 || page > 8191 || reg > 31)
 		return -ENOTSUPP;
 
 	/* Take bug on RTL839x Rev <= C into account */

target/linux/realtek/files-6.6/drivers/net/ethernet/rtl838x_eth.c

@@ -195,7 +195,7 @@ struct rtl838x_eth_priv {
 	u32 lastEvent;
 	u16 rxrings;
 	u16 rxringlen;
-	u8 smi_bus[MAX_PORTS];
+	int smi_bus[MAX_PORTS];
 	u8 smi_addr[MAX_PORTS];
 	u32 sds_id[MAX_PORTS];
 	bool smi_bus_isc45[MAX_SMI_BUSSES];
@@ -2008,8 +2008,9 @@ static int rtmdio_930x_reset(struct mii_bus *bus)
 	for (int i = 0; i < RTL930X_CPU_PORT; i++) {
 		int pos;
 
-		if (priv->smi_bus[i] > 3)
+		if (priv->smi_bus[i] < 0)
 			continue;
+
 		pos = (i % 6) * 5;
 		sw_w32_mask(0x1f << pos, priv->smi_addr[i] << pos,
 			    RTL930X_SMI_PORT0_5_ADDR + (i / 6) * 4);
@@ -2114,9 +2115,12 @@ static int rtmdio_931x_reset(struct mii_bus *bus)
 	mdc_on[0] = mdc_on[1] = mdc_on[2] = mdc_on[3] = false;
 	/* Mapping of port to phy-addresses on an SMI bus */
 	poll_sel[0] = poll_sel[1] = poll_sel[2] = poll_sel[3] = 0;
-	for (int i = 0; i < 56; i++) {
+	for (int i = 0; i < RTL931X_CPU_PORT; i++) {
 		u32 pos;
 
+		if (priv->smi_bus[i] < 0)
+			continue;
+
 		pos = (i % 6) * 5;
 		sw_w32_mask(0x1f << pos, priv->smi_addr[i] << pos, RTL931X_SMI_PORT_ADDR + (i / 6) * 4);
 		pos = (i * 2) % 32;
@@ -2282,30 +2286,35 @@ static int rtl838x_mdio_init(struct rtl838x_eth_priv *priv)
 		if (of_property_read_u32(dn, "reg", &pn))
 			continue;
 
-		if (of_property_read_u32_array(dn, "rtl9300,smi-address", &smi_addr[0], 2)) {
+		if (pn >= MAX_PORTS) {
-			smi_addr[0] = 0;
+			pr_err("%s: illegal port number %d\n", __func__, pn);
-			smi_addr[1] = pn;
+			return -ENODEV;
 		}
 
 		if (of_property_read_u32(dn, "sds", &priv->sds_id[pn]))
 			priv->sds_id[pn] = -1;
-		else {
+		else
 			pr_info("set sds port %d to %d\n", pn, priv->sds_id[pn]);
-		}
 
-		if (pn < MAX_PORTS) {
+		if (of_property_read_u32_array(dn, "rtl9300,smi-address", &smi_addr[0], 2)) {
+			priv->smi_bus[pn] = 0;
+			priv->smi_addr[pn] = pn;
+		} else {
 			priv->smi_bus[pn] = smi_addr[0];
 			priv->smi_addr[pn] = smi_addr[1];
-		} else {
-			pr_err("%s: illegal port number %d\n", __func__, pn);
 		}
 
-		if (of_device_is_compatible(dn, "ethernet-phy-ieee802.3-c45"))
+		if (priv->smi_bus[pn] >= MAX_SMI_BUSSES) {
-			priv->smi_bus_isc45[smi_addr[0]] = true;
+			pr_err("%s: illegal SMI bus number %d\n", __func__, priv->smi_bus[pn]);
-
+			return -ENODEV;
-		if (of_property_read_bool(dn, "phy-is-integrated")) {
-			priv->phy_is_internal[pn] = true;
 		}
+
+		priv->phy_is_internal[pn] = of_property_read_bool(dn, "phy-is-integrated");
+
+		if (priv->phy_is_internal[pn] && priv->sds_id[pn] >= 0)
+			priv->smi_bus[pn]= -1;
+		else if (of_device_is_compatible(dn, "ethernet-phy-ieee802.3-c45"))
+			priv->smi_bus_isc45[priv->smi_bus[pn]] = true;
 	}
 
 	dn = of_find_compatible_node(NULL, NULL, "realtek,rtl83xx-switch");

target/linux/realtek/files-6.6/drivers/net/phy/rtl83xx-phy.c

@@ -45,7 +45,8 @@ extern int phy_port_read_paged(struct phy_device *phydev, int port, int page, u3
  * RealTek SoCs allows to access the PHY in RAW mode, ie. bypassing
  * the cache and paging engine of the MDIO controller.
  */
-#define RTL83XX_PAGE_RAW		0x0fff
+#define RTL838X_PAGE_RAW		0x0fff
+#define RTL839X_PAGE_RAW		0x1fff
 
 /* internal RTL821X PHY uses register 0x1d to select media page */
 #define RTL821XINT_MEDIA_PAGE_SELECT	0x1d
@@ -146,6 +147,79 @@ static int resume_polling(u64 saved_state)
 	return 0;
 }
 
+int rtl821x_match_phy_device(struct phy_device *phydev)
+{
+	u64 poll_state;
+	int rawpage, port = phydev->mdio.addr & ~3;
+	int oldpage, chip_mode, chip_cfg_mode;
+
+	if (phydev->phy_id == PHY_ID_RTL8218B_E)
+		return PHY_IS_RTL8218B_E;
+
+	if (phydev->phy_id != PHY_ID_RTL8214_OR_8218)
+		return PHY_IS_NOT_RTL821X;
+
+	if (soc_info.family == RTL8380_FAMILY_ID)
+		rawpage = RTL838X_PAGE_RAW;
+	else if (soc_info.family == RTL8390_FAMILY_ID)
+		rawpage = RTL839X_PAGE_RAW;
+	else
+		return PHY_IS_NOT_RTL821X;
+
+	poll_state = disable_polling(port);
+	/*
+	 * At this stage the write_page()/read_page() PHY functions are not yet
+	 * registered and normal paged access is not possible. The following
+	 * detection routine works because our MDIO bus has all the Realtek
+	 * PHY page handling (register 31) integrated into the port functions.
+	 */
+	oldpage = phy_port_read_paged(phydev, port, rawpage, 31);
+	phy_port_write_paged(phydev, port, rawpage, 31, 0xa42);
+	phy_port_write_paged(phydev, port, rawpage, 29, 0x008);
+	phy_port_write_paged(phydev, port, rawpage, 31, 0x278);
+	phy_port_write_paged(phydev, port, rawpage, 18, 0x455);
+	phy_port_write_paged(phydev, port, rawpage, 31, 0x260);
+	chip_mode = phy_port_read_paged(phydev, port, rawpage, 18);
+	phy_port_write_paged(phydev, port, rawpage, 31, 0xa42);
+	phy_port_write_paged(phydev, port, rawpage, 29, 0x000);
+	phy_port_write_paged(phydev, port, rawpage, 31, oldpage);
+
+	resume_polling(poll_state);
+
+	pr_debug("%s(%d): got chip mode %x\n", __func__, phydev->mdio.addr, chip_mode);
+
+	/* we checked the 4th port of a RTL8218B and got no config values */
+	if (!chip_mode)
+		return PHY_IS_RTL8218B_E;
+
+	chip_cfg_mode = (chip_mode >> 4) & 0xf;
+	chip_mode &= 0xf;
+
+	if (chip_mode == 0xd || chip_mode == 0xf)
+		return PHY_IS_RTL8218B_E;
+
+	if (chip_mode == 0x4 || chip_mode == 0x6)
+		return PHY_IS_RTL8214FC;
+
+	if (chip_mode != 0xc && chip_mode != 0xe)
+		return PHY_IS_NOT_RTL821X;
+
+	if (chip_cfg_mode == 0x4 || chip_cfg_mode == 0x6)
+		return PHY_IS_RTL8214FC;
+
+	return PHY_IS_RTL8214FB;
+}
+
+static int rtl8218b_ext_match_phy_device(struct phy_device *phydev)
+{
+	return rtl821x_match_phy_device(phydev) == PHY_IS_RTL8218B_E;
+}
+
+static int rtl8214fc_match_phy_device(struct phy_device *phydev)
+{
+	return rtl821x_match_phy_device(phydev) == PHY_IS_RTL8214FC;
+}
+
 static void rtl8380_int_phy_on_off(struct phy_device *phydev, bool on)
 {
 	phy_modify(phydev, 0, BMCR_PDOWN, on ? 0 : BMCR_PDOWN);
@@ -154,11 +228,11 @@ static void rtl8380_int_phy_on_off(struct phy_device *phydev, bool on)
 static void rtl8380_rtl8214fc_on_off(struct phy_device *phydev, bool on)
 {
 	/* fiber ports */
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_FIBRE);
+	phy_write_paged(phydev, RTL838X_PAGE_RAW, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_FIBRE);
 	phy_modify(phydev, 0x10, BMCR_PDOWN, on ? 0 : BMCR_PDOWN);
 
 	/* copper ports */
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER);
+	phy_write_paged(phydev, RTL838X_PAGE_RAW, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER);
 	phy_modify_paged(phydev, RTL821X_PAGE_POWER, 0x10, BMCR_PDOWN, on ? 0 : BMCR_PDOWN);
 }
 
@@ -693,17 +767,17 @@ static void rtl821x_phy_setup_package_broadcast(struct phy_device *phydev, bool
 	int mac = phydev->mdio.addr;
 
 	/* select main page 0 */
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN);
+	phy_write_paged(phydev, RTL838X_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN);
 	/* write to 0x8 to register 0x1d on main page 0 */
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL);
+	phy_write_paged(phydev, RTL838X_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL);
 	/* select page 0x266 */
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL821X_PAGE_PORT);
+	phy_write_paged(phydev, RTL838X_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL821X_PAGE_PORT);
 	/* set phy id and target broadcast bitmap in register 0x16 on page 0x266 */
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, 0x16, (enable?0xff00:0x00) | mac);
+	phy_write_paged(phydev, RTL838X_PAGE_RAW, 0x16, (enable?0xff00:0x00) | mac);
 	/* return to main page 0 */
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN);
+	phy_write_paged(phydev, RTL838X_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN);
 	/* write to 0x0 to register 0x1d on main page 0 */
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
+	phy_write_paged(phydev, RTL838X_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
 	mdelay(1);
 }
 
@@ -779,8 +853,8 @@ static int rtl8380_configure_int_rtl8218b(struct phy_device *phydev)
 
 	/* Ready PHY for patch */
 	for (int p = 0; p < 8; p++) {
-		phy_package_port_write_paged(phydev, p, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL821X_PAGE_PATCH);
+		phy_package_port_write_paged(phydev, p, RTL838X_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL821X_PAGE_PATCH);
-		phy_package_port_write_paged(phydev, p, RTL83XX_PAGE_RAW, 0x10, 0x0010);
+		phy_package_port_write_paged(phydev, p, RTL838X_PAGE_RAW, 0x10, 0x0010);
 	}
 	msleep(500);
 	for (int p = 0; p < 8; p++) {
@@ -803,14 +877,14 @@ static int rtl8380_configure_int_rtl8218b(struct phy_device *phydev)
 
 		i = 0;
 		while (rtl838x_6275B_intPhy_perport[i * 2]) {
-			phy_package_port_write_paged(phydev, p, RTL83XX_PAGE_RAW,
+			phy_package_port_write_paged(phydev, p, RTL838X_PAGE_RAW,
 			                             rtl838x_6275B_intPhy_perport[i * 2],
 			                             rtl838x_6275B_intPhy_perport[i * 2 + 1]);
 			i++;
 		}
 		i = 0;
 		while (rtl8218b_6276B_hwEsd_perport[i * 2]) {
-			phy_package_port_write_paged(phydev, p, RTL83XX_PAGE_RAW,
+			phy_package_port_write_paged(phydev, p, RTL838X_PAGE_RAW,
 			                             rtl8218b_6276B_hwEsd_perport[i * 2],
 			                             rtl8218b_6276B_hwEsd_perport[i * 2 + 1]);
 			i++;
@@ -870,30 +944,30 @@ static int rtl8380_configure_ext_rtl8218b(struct phy_device *phydev)
 	msleep(100);
 
 	/* Get Chip revision */
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN);
+	phy_write_paged(phydev, RTL838X_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN);
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, 0x1b, 0x4);
+	phy_write_paged(phydev, RTL838X_PAGE_RAW, 0x1b, 0x4);
-	val = phy_read_paged(phydev, RTL83XX_PAGE_RAW, 0x1c);
+	val = phy_read_paged(phydev, RTL838X_PAGE_RAW, 0x1c);
 
 	phydev_info(phydev, "Detected chip revision %04x\n", val);
 
 	for (int i = 0; rtl8380_rtl8218b_perchip[i * 3] &&
 	                rtl8380_rtl8218b_perchip[i * 3 + 1]; i++) {
 		phy_package_port_write_paged(phydev, rtl8380_rtl8218b_perchip[i * 3],
-					     RTL83XX_PAGE_RAW, rtl8380_rtl8218b_perchip[i * 3 + 1],
+					     RTL838X_PAGE_RAW, rtl8380_rtl8218b_perchip[i * 3 + 1],
 					     rtl8380_rtl8218b_perchip[i * 3 + 2]);
 	}
 
 	/* Enable PHY */
 	for (int i = 0; i < 8; i++) {
-		phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN);
+		phy_package_port_write_paged(phydev, i, RTL838X_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN);
-		phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, 0x00, 0x1140);
+		phy_package_port_write_paged(phydev, i, RTL838X_PAGE_RAW, 0x00, 0x1140);
 	}
 	mdelay(100);
 
 	/* Request patch */
 	for (int i = 0; i < 8; i++) {
-		phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL821X_PAGE_PATCH);
+		phy_package_port_write_paged(phydev, i, RTL838X_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL821X_PAGE_PATCH);
-		phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, 0x10, 0x0010);
+		phy_package_port_write_paged(phydev, i, RTL838X_PAGE_RAW, 0x10, 0x0010);
 	}
 
 	mdelay(300);
@@ -916,7 +990,7 @@ static int rtl8380_configure_ext_rtl8218b(struct phy_device *phydev)
 	/* Use Broadcast ID method for patching */
 	rtl821x_phy_setup_package_broadcast(phydev, true);
 
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, 30, 8);
+	phy_write_paged(phydev, RTL838X_PAGE_RAW, 30, 8);
 	phy_write_paged(phydev, 0x26e, 17, 0xb);
 	phy_write_paged(phydev, 0x26e, 16, 0x2);
 	mdelay(1);
@@ -925,7 +999,7 @@ static int rtl8380_configure_ext_rtl8218b(struct phy_device *phydev)
 	ipd = (ipd >> 4) & 0xf; /* unused ? */
 
 	for (int i = 0; rtl8218B_6276B_rtl8380_perport[i * 2]; i++) {
-		phy_write_paged(phydev, RTL83XX_PAGE_RAW, rtl8218B_6276B_rtl8380_perport[i * 2],
+		phy_write_paged(phydev, RTL838X_PAGE_RAW, rtl8218B_6276B_rtl8380_perport[i * 2],
 		                rtl8218B_6276B_rtl8380_perport[i * 2 + 1]);
 	}
 
@@ -935,21 +1009,6 @@ static int rtl8380_configure_ext_rtl8218b(struct phy_device *phydev)
 	return 0;
 }
 
-static int rtl8218b_ext_match_phy_device(struct phy_device *phydev)
-{
-	int addr = phydev->mdio.addr;
-
-	/* Both the RTL8214FC and the external RTL8218B have the same
-	 * PHY ID. On the RTL838x, the RTL8218B can only be attached_dev
-	 * at PHY IDs 0-7, while the RTL8214FC must be attached via
-	 * the pair of SGMII/1000Base-X with higher PHY-IDs
-	 */
-	if (soc_info.family == RTL8380_FAMILY_ID)
-		return phydev->phy_id == PHY_ID_RTL8218B_E && addr < 8;
-	else
-		return phydev->phy_id == PHY_ID_RTL8218B_E;
-}
-
 static bool rtl8214fc_media_is_fibre(struct phy_device *phydev)
 {
 	int mac = phydev->mdio.addr;
@@ -957,9 +1016,9 @@ static bool rtl8214fc_media_is_fibre(struct phy_device *phydev)
 	static int reg[] = {16, 19, 20, 21};
 	u32 val;
 
-	phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL);
+	phy_package_write_paged(phydev, RTL838X_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL);
 	val = phy_package_read_paged(phydev, RTL821X_PAGE_PORT, reg[mac % 4]);
-	phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
+	phy_package_write_paged(phydev, RTL838X_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
 
 	if (val & BMCR_PDOWN)
 		return false;
@@ -973,10 +1032,10 @@ static void rtl8214fc_power_set(struct phy_device *phydev, int port, bool on)
 
 	if (port == PORT_FIBRE) {
 		pr_info("%s: Powering %s FIBRE (port %d)\n", __func__, state, phydev->mdio.addr);
-		phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_FIBRE);
+		phy_write_paged(phydev, RTL838X_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_FIBRE);
 	} else {
 		pr_info("%s: Powering %s COPPER (port %d)\n", __func__, state, phydev->mdio.addr);
-		phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER);
+		phy_write_paged(phydev, RTL838X_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER);
 	}
 
 	if (on) {
@@ -985,7 +1044,7 @@ static void rtl8214fc_power_set(struct phy_device *phydev, int port, bool on)
 		phy_modify_paged(phydev, RTL821X_PAGE_POWER, 0x10, 0, BMCR_PDOWN);
 	}
 
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
+	phy_write_paged(phydev, RTL838X_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
 }
 
 static int rtl8214fc_suspend(struct phy_device *phydev)
@@ -1017,7 +1076,7 @@ static void rtl8214fc_media_set(struct phy_device *phydev, bool set_fibre)
 	int val;
 
 	pr_info("%s: port %d, set_fibre: %d\n", __func__, mac, set_fibre);
-	phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL);
+	phy_package_write_paged(phydev, RTL838X_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL);
 	val = phy_package_read_paged(phydev, RTL821X_PAGE_PORT, reg[mac % 4]);
 
 	val |= BIT(10);
@@ -1027,9 +1086,9 @@ static void rtl8214fc_media_set(struct phy_device *phydev, bool set_fibre)
 		val |= BMCR_PDOWN;
 	}
 
-	phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL);
+	phy_package_write_paged(phydev, RTL838X_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL);
 	phy_package_write_paged(phydev, RTL821X_PAGE_PORT, reg[mac % 4], val);
-	phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
+	phy_package_write_paged(phydev, RTL838X_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
 
 	if (!phydev->suspended) {
 		if (set_fibre) {
@@ -1296,11 +1355,6 @@ static int rtl8218d_set_eee(struct phy_device *phydev, struct ethtool_eee *e)
 	return 0;
 }
 
-static int rtl8214c_match_phy_device(struct phy_device *phydev)
-{
-	return phydev->phy_id == PHY_ID_RTL8214C;
-}
-
 static int rtl8380_configure_rtl8214c(struct phy_device *phydev)
 {
 	u32 phy_id, val;
@@ -1359,8 +1413,8 @@ static int rtl8380_configure_rtl8214fc(struct phy_device *phydev)
 	rtl8380_rtl8214fc_perport = (void *)h + sizeof(struct fw_header) + h->parts[1].start;
 
 	/* detect phy version */
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, 27, 0x0004);
+	phy_write_paged(phydev, RTL838X_PAGE_RAW, 27, 0x0004);
-	val = phy_read_paged(phydev, RTL83XX_PAGE_RAW, 28);
+	val = phy_read_paged(phydev, RTL838X_PAGE_RAW, 28);
 
 	val = phy_read(phydev, 16);
 	if (val & BMCR_PDOWN)
@@ -1380,10 +1434,10 @@ static int rtl8380_configure_rtl8214fc(struct phy_device *phydev)
 		if (rtl8380_rtl8214fc_perchip[i * 3 + 1] == 0x13 && page == 0x260) {
 			val = phy_read_paged(phydev, 0x260, 13);
 			val = (val & 0x1f00) | (rtl8380_rtl8214fc_perchip[i * 3 + 2] & 0xe0ff);
-			phy_write_paged(phydev, RTL83XX_PAGE_RAW,
+			phy_write_paged(phydev, RTL838X_PAGE_RAW,
 					rtl8380_rtl8214fc_perchip[i * 3 + 1], val);
 		} else {
-			phy_write_paged(phydev, RTL83XX_PAGE_RAW,
+			phy_write_paged(phydev, RTL838X_PAGE_RAW,
 					rtl8380_rtl8214fc_perchip[i * 3 + 1],
 					rtl8380_rtl8214fc_perchip[i * 3 + 2]);
 		}
@@ -1391,14 +1445,14 @@ static int rtl8380_configure_rtl8214fc(struct phy_device *phydev)
 
 	/* Force copper medium */
 	for (int i = 0; i < 4; i++) {
-		phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN);
+		phy_package_port_write_paged(phydev, i, RTL838X_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN);
-		phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER);
+		phy_package_port_write_paged(phydev, i, RTL838X_PAGE_RAW, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER);
 	}
 
 	/* Enable PHY */
 	for (int i = 0; i < 4; i++) {
-		phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN);
+		phy_package_port_write_paged(phydev, i, RTL838X_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN);
-		phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, 0x00, 0x1140);
+		phy_package_port_write_paged(phydev, i, RTL838X_PAGE_RAW, 0x00, 0x1140);
 	}
 	mdelay(100);
 
@@ -1419,8 +1473,8 @@ static int rtl8380_configure_rtl8214fc(struct phy_device *phydev)
 
 	/* Request patch */
 	for (int i = 0; i < 4; i++) {
-		phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL821X_PAGE_PATCH);
+		phy_package_port_write_paged(phydev, i, RTL838X_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL821X_PAGE_PATCH);
-		phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, 0x10, 0x0010);
+		phy_package_port_write_paged(phydev, i, RTL838X_PAGE_RAW, 0x10, 0x0010);
 	}
 	mdelay(300);
 
@@ -1442,7 +1496,7 @@ static int rtl8380_configure_rtl8214fc(struct phy_device *phydev)
 	rtl821x_phy_setup_package_broadcast(phydev, true);
 
 	for (int i = 0; rtl8380_rtl8214fc_perport[i * 2]; i++) {
-		phy_write_paged(phydev, RTL83XX_PAGE_RAW, rtl8380_rtl8214fc_perport[i * 2],
+		phy_write_paged(phydev, RTL838X_PAGE_RAW, rtl8380_rtl8214fc_perport[i * 2],
 		                rtl8380_rtl8214fc_perport[i * 2 + 1]);
 	}
 
@@ -1451,20 +1505,13 @@ static int rtl8380_configure_rtl8214fc(struct phy_device *phydev)
 
 	/* Auto medium selection */
 	for (int i = 0; i < 4; i++) {
-		phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN);
+		phy_write_paged(phydev, RTL838X_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN);
-		phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
+		phy_write_paged(phydev, RTL838X_PAGE_RAW, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
 	}
 
 	return 0;
 }
 
-static int rtl8214fc_match_phy_device(struct phy_device *phydev)
-{
-	int addr = phydev->mdio.addr;
-
-	return phydev->phy_id == PHY_ID_RTL8214FC && addr >= 24;
-}
-
 static int rtl8380_configure_serdes(struct phy_device *phydev)
 {
 	u32 v;
@@ -3843,10 +3890,9 @@ static int rtl9300_serdes_probe(struct phy_device *phydev)
 
 static struct phy_driver rtl83xx_phy_driver[] = {
 	{
-		PHY_ID_MATCH_MODEL(PHY_ID_RTL8214C),
+		PHY_ID_MATCH_EXACT(PHY_ID_RTL8214C),
 		.name		= "Realtek RTL8214C",
 		.features	= PHY_GBIT_FEATURES,
-		.match_phy_device = rtl8214c_match_phy_device,
 		.probe		= rtl8214c_phy_probe,
 		.read_page	= rtl821x_read_page,
 		.write_page	= rtl821x_write_page,
@@ -3855,10 +3901,9 @@ static struct phy_driver rtl83xx_phy_driver[] = {
 		.set_loopback	= genphy_loopback,
 	},
 	{
-		PHY_ID_MATCH_MODEL(PHY_ID_RTL8214FC),
+		.match_phy_device = rtl8214fc_match_phy_device,
 		.name		= "Realtek RTL8214FC",
 		.features	= PHY_GBIT_FIBRE_FEATURES,
-		.match_phy_device = rtl8214fc_match_phy_device,
 		.probe		= rtl8214fc_phy_probe,
 		.read_page	= rtl821x_read_page,
 		.write_page	= rtl821x_write_page,
@@ -3871,10 +3916,9 @@ static struct phy_driver rtl83xx_phy_driver[] = {
 		.get_eee	= rtl8214fc_get_eee,
 	},
 	{
-		PHY_ID_MATCH_MODEL(PHY_ID_RTL8218B_E),
+		.match_phy_device = rtl8218b_ext_match_phy_device,
 		.name		= "Realtek RTL8218B (external)",
 		.features	= PHY_GBIT_FEATURES,
-		.match_phy_device = rtl8218b_ext_match_phy_device,
 		.probe		= rtl8218b_ext_phy_probe,
 		.read_page	= rtl821x_read_page,
 		.write_page	= rtl821x_write_page,
@@ -3885,7 +3929,7 @@ static struct phy_driver rtl83xx_phy_driver[] = {
 		.get_eee	= rtl8218b_get_eee,
 	},
 	{
-		PHY_ID_MATCH_MODEL(PHY_ID_RTL8218D),
+		PHY_ID_MATCH_EXACT(PHY_ID_RTL8218D),
 		.name		= "REALTEK RTL8218D",
 		.features	= PHY_GBIT_FEATURES,
 		.probe		= rtl8218d_phy_probe,
@@ -3990,7 +4034,7 @@ static struct phy_driver rtl83xx_phy_driver[] = {
 module_phy_driver(rtl83xx_phy_driver);
 
 static struct mdio_device_id __maybe_unused rtl83xx_tbl[] = {
-	{ PHY_ID_MATCH_MODEL(PHY_ID_RTL8214FC) },
+	{ PHY_ID_MATCH_MODEL(PHY_ID_RTL8214_OR_8218) },
 	{ }
 };
 

target/linux/realtek/files-6.6/drivers/net/phy/rtl83xx-phy.h

@@ -19,21 +19,26 @@ struct __attribute__ ((__packed__)) fw_header {
 };
 
 /* TODO: fixed path? */
-#define FIRMWARE_838X_8380_1	"rtl838x_phy/rtl838x_8380.fw"
+#define FIRMWARE_838X_8380_1			"rtl838x_phy/rtl838x_8380.fw"
-#define FIRMWARE_838X_8214FC_1	"rtl838x_phy/rtl838x_8214fc.fw"
+#define FIRMWARE_838X_8214FC_1			"rtl838x_phy/rtl838x_8214fc.fw"
-#define FIRMWARE_838X_8218b_1	"rtl838x_phy/rtl838x_8218b.fw"
+#define FIRMWARE_838X_8218b_1			"rtl838x_phy/rtl838x_8218b.fw"
 
-/* External RTL8218B and RTL8214FC IDs are identical */
+#define PHY_ID_RTL8214C				0x001cc942
-#define PHY_ID_RTL8214C		0x001cc942
+#define PHY_ID_RTL8218B_E			0x001cc980
-#define PHY_ID_RTL8214FC	0x001cc981
+#define PHY_ID_RTL8214_OR_8218			0x001cc981
-#define PHY_ID_RTL8218B_E	0x001cc981
+#define PHY_ID_RTL8218D				0x001cc983
-#define PHY_ID_RTL8218D		0x001cc983
+#define PHY_ID_RTL8218B_I			0x001cca40
-#define PHY_ID_RTL8218B_I	0x001cca40
+#define PHY_ID_RTL8221B				0x001cc849
-#define PHY_ID_RTL8221B		0x001cc849
+#define PHY_ID_RTL8226				0x001cc838
-#define PHY_ID_RTL8226		0x001cc838
+#define PHY_ID_RTL8390_GENERIC			0x001ccab0
-#define PHY_ID_RTL8390_GENERIC	0x001ccab0
+#define PHY_ID_RTL8393_I			0x001c8393
-#define PHY_ID_RTL8393_I	0x001c8393
+#define PHY_ID_RTL9300_I			0x70d03106
-#define PHY_ID_RTL9300_I	0x70d03106
+
+/* These PHYs share the same id (0x001cc981) */
+#define PHY_IS_NOT_RTL821X			0
+#define PHY_IS_RTL8214FC			1
+#define PHY_IS_RTL8214FB			2
+#define PHY_IS_RTL8218B_E			3
 
 /* Registers of the internal Serdes of the 8380 */
 #define RTL838X_SDS_MODE_SEL			(0x0028)

target/linux/rockchip/armv8/base-files/etc/board.d/01_leds

@@ -11,6 +11,7 @@ case $board in
 friendlyarm,nanopi-r2c|\
 friendlyarm,nanopi-r2c-plus|\
 friendlyarm,nanopi-r2s|\
+friendlyarm,nanopi-r3s|\
 friendlyarm,nanopi-r4s|\
 friendlyarm,nanopi-r4se|\
 friendlyarm,nanopi-r4s-enterprise|\

target/linux/rockchip/armv8/base-files/etc/board.d/02_network

@@ -14,6 +14,7 @@ rockchip_setup_interfaces()
 	friendlyarm,nanopi-r2c|\
 	friendlyarm,nanopi-r2c-plus|\
 	friendlyarm,nanopi-r2s|\
+	friendlyarm,nanopi-r3s|\
 	friendlyarm,nanopi-r4s|\
 	friendlyarm,nanopi-r4se|\
 	friendlyarm,nanopi-r4s-enterprise|\
@@ -86,6 +87,13 @@ rockchip_setup_macs()
 		wan_mac=$(macaddr_generate_from_mmc_cid mmcblk1)
 		lan_mac=$(macaddr_add "$wan_mac" 1)
 		;;
+	friendlyarm,nanopi-r3s|\
+	friendlyarm,nanopi-r5c|\
+	friendlyarm,nanopi-r6c|\
+	xunlong,orangepi-5-plus)
+		wan_mac=$(macaddr_generate_from_mmc_cid mmcblk*)
+		lan_mac=$(macaddr_add "$wan_mac" 1)
+		;;
 	friendlyarm,nanopi-r4se)
 		wan_mac=$(macaddr_generate_from_mmc_cid mmcblk2)
 		lan_mac=$(macaddr_add "$wan_mac" 1)
@@ -94,12 +102,6 @@ rockchip_setup_macs()
 		wan_mac=$(get_mac_binary "/sys/bus/i2c/devices/2-0051/eeprom" 0xfa)
 		lan_mac=$(macaddr_setbit_la "$wan_mac")
 		;;
-	friendlyarm,nanopi-r5c|\
-	friendlyarm,nanopi-r6c|\
-	xunlong,orangepi-5-plus)
-		wan_mac=$(macaddr_generate_from_mmc_cid mmcblk*)
-		lan_mac=$(macaddr_add "$wan_mac" 1)
-		;;
 	xunlong,orangepi-r1-plus|\
 	xunlong,orangepi-r1-plus-lts)
 		lan_mac=$(cat /sys/class/net/eth1/address)

target/linux/rockchip/armv8/base-files/etc/hotplug.d/net/40-net-smp-affinity

@@ -34,6 +34,7 @@ armsom,sige3|\
 armsom,sige7|\
 ezpro,mrkaio-m68s|\
 firefly,rk3568-roc-pc|\
+friendlyarm,nanopi-r3s|\
 friendlyarm,nanopi-r5c|\
 friendlyarm,nanopi-r6c|\
 lunzn,fastrhino-r66s|\

target/linux/rockchip/armv8/config-6.6

@@ -382,7 +382,6 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
 CONFIG_LEDS_SYSCON=y
 CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_DISK=y
 CONFIG_LEDS_TRIGGER_PANIC=y
 CONFIG_LIBCRC32C=y
 CONFIG_LIBFDT=y

target/linux/rockchip/image/armv8.mk

@@ -134,6 +134,15 @@ define Device/friendlyarm_nanopi-r2s
 endef
 TARGET_DEVICES += friendlyarm_nanopi-r2s
 
+define Device/friendlyarm_nanopi-r3s
+  DEVICE_VENDOR := FriendlyARM
+  DEVICE_MODEL := NanoPi R3S
+  SOC := rk3566
+  BOOT_FLOW := pine64-img
+  DEVICE_PACKAGES := kmod-r8168
+endef
+TARGET_DEVICES += friendlyarm_nanopi-r3s
+
 define Device/friendlyarm_nanopi-r4s
   DEVICE_VENDOR := FriendlyARM
   DEVICE_MODEL := NanoPi R4S

target/linux/rockchip/patches-6.6/011-01-v6.13-arm64-dts-rockchip-Add-FriendlyARM-NanoPi-R3S-board.patch

@@ -0,0 +1,596 @@
+From 50decd493c8394c52d04561fe4ede34df27a46ba Mon Sep 17 00:00:00 2001
+From: Tianling Shen <cnsztl@gmail.com>
+Date: Mon, 21 Oct 2024 01:39:46 +0800
+Subject: [PATCH] arm64: dts: rockchip: Add FriendlyARM NanoPi R3S board
+
+The NanoPi R3S(as "R3S") is an open source platform with dual-Gbps
+Ethernet ports designed and developed by FriendlyElec for IoT
+applications.
+
+Specification:
+- Rockchip RK3566
+- 2GB LPDDR4X RAM
+- optional 32GB eMMC module
+- SD card slot
+- 2x 1000 Base-T
+- 3x LEDs (POWER, LAN, WAN)
+- 2x Buttons (Reset, MaskROM)
+- 1x USB 3.0 Port
+- Type-C 5V 2A Power
+
+Signed-off-by: Tianling Shen <cnsztl@gmail.com>
+Link: https://lore.kernel.org/r/20241020173946.225960-2-cnsztl@gmail.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/Makefile         |   1 +
+ .../boot/dts/rockchip/rk3566-nanopi-r3s.dts   | 554 ++++++++++++++++++
+ 2 files changed, 555 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
+
+--- a/arch/arm64/boot/dts/rockchip/Makefile
++++ b/arch/arm64/boot/dts/rockchip/Makefile
+@@ -89,6 +89,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-so
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-model-a.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-nanopi-r3s.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
+@@ -0,0 +1,554 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++/*
++ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
++ *
++ * Copyright (c) 2024 FriendlyElec Computer Tech. Co., Ltd.
++ * (http://www.friendlyarm.com)
++ *
++ * Copyright (c) 2024 Tianling Shen <cnsztl@gmail.com>
++ */
++
++/dts-v1/;
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/leds/common.h>
++#include <dt-bindings/pinctrl/rockchip.h>
++#include <dt-bindings/soc/rockchip,vop2.h>
++#include "rk3566.dtsi"
++
++/ {
++	model = "FriendlyARM NanoPi R3S";
++	compatible = "friendlyarm,nanopi-r3s", "rockchip,rk3566";
++
++	aliases {
++		ethernet0 = &gmac1;
++		mmc0 = &sdmmc0;
++		mmc1 = &sdhci;
++	};
++
++	chosen: chosen {
++		stdout-path = "serial2:1500000n8";
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++		pinctrl-names = "default";
++		pinctrl-0 = <&reset_button_pin>;
++
++		button-reset {
++			label = "reset";
++			gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_RESTART>;
++			debounce-interval = <50>;
++		};
++	};
++
++	gpio-leds {
++		compatible = "gpio-leds";
++		pinctrl-names = "default";
++		pinctrl-0 = <&power_led_pin>, <&lan_led_pin>, <&wan_led_pin>;
++
++		power_led: led-0 {
++			color = <LED_COLOR_ID_RED>;
++			function = LED_FUNCTION_POWER;
++			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
++			default-state = "on";
++		};
++
++		lan_led: led-1 {
++			color = <LED_COLOR_ID_GREEN>;
++			function = LED_FUNCTION_LAN;
++			gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
++		};
++
++		wan_led: led-2 {
++			color = <LED_COLOR_ID_GREEN>;
++			function = LED_FUNCTION_WAN;
++			gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
++		};
++	};
++
++	vcc3v3_sys: regulator-vcc3v3-sys {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc3v3_sys";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		vin-supply = <&vcc5v0_sys>;
++	};
++
++	vcc5v0_sys: regulator-vcc5v0-sys {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc5v0_sys";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		vin-supply = <&vdd_usbc>;
++	};
++
++	vcc5v0_usb: regulator-vcc5v0_usb {
++		compatible = "regulator-fixed";
++		enable-active-high;
++		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&vcc5v0_usb_host_en>;
++		regulator-name = "vcc5v0_usb";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		vin-supply = <&vcc5v0_sys>;
++	};
++
++	vdd_usbc: regulator-vdd-usbc {
++		compatible = "regulator-fixed";
++		regulator-name = "vdd_usbc";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++	};
++};
++
++&combphy1 {
++	status = "okay";
++};
++
++&combphy2 {
++	status = "okay";
++};
++
++&cpu0 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu1 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu2 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu3 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&gmac1 {
++	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
++	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
++	assigned-clock-rates = <0>, <125000000>;
++	clock_in_out = "output";
++	phy-mode = "rgmii-id";
++	phy-handle = <&rgmii_phy1>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&gmac1m0_miim
++		     &gmac1m0_tx_bus2_level3
++		     &gmac1m0_rx_bus2
++		     &gmac1m0_rgmii_clk_level2
++		     &gmac1m0_rgmii_bus_level3>;
++	snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
++	snps,reset-active-low;
++	/* Reset time is 20ms, 100ms for rtl8211f */
++	snps,reset-delays-us = <0 20000 100000>;
++	status = "okay";
++};
++
++&gpu {
++	mali-supply = <&vdd_gpu>;
++	status = "okay";
++};
++
++&i2c0 {
++	status = "okay";
++
++	vdd_cpu: regulator@1c {
++		compatible = "tcs,tcs4525";
++		reg = <0x1c>;
++		fcs,suspend-voltage-selector = <1>;
++		regulator-name = "vdd_cpu";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <800000>;
++		regulator-max-microvolt = <1150000>;
++		regulator-ramp-delay = <2300>;
++		vin-supply = <&vcc5v0_sys>;
++
++		regulator-state-mem {
++			regulator-off-in-suspend;
++		};
++	};
++
++	rk809: pmic@20 {
++		compatible = "rockchip,rk809";
++		reg = <0x20>;
++		interrupt-parent = <&gpio0>;
++		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
++		#clock-cells = <1>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&pmic_int>;
++		system-power-controller;
++		vcc1-supply = <&vcc3v3_sys>;
++		vcc2-supply = <&vcc3v3_sys>;
++		vcc3-supply = <&vcc3v3_sys>;
++		vcc4-supply = <&vcc3v3_sys>;
++		vcc5-supply = <&vcc3v3_sys>;
++		vcc6-supply = <&vcc3v3_sys>;
++		vcc7-supply = <&vcc3v3_sys>;
++		vcc8-supply = <&vcc3v3_sys>;
++		vcc9-supply = <&vcc3v3_sys>;
++		wakeup-source;
++
++		regulators {
++			vdd_logic: DCDC_REG1 {
++				regulator-name = "vdd_logic";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdd_gpu: DCDC_REG2 {
++				regulator-name = "vdd_gpu";
++				regulator-always-on;
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc_ddr: DCDC_REG3 {
++				regulator-name = "vcc_ddr";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-initial-mode = <0x2>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++				};
++			};
++
++			vdd_npu: DCDC_REG4 {
++				regulator-name = "vdd_npu";
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc_1v8: DCDC_REG5 {
++				regulator-name = "vcc_1v8";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdda0v9_image: LDO_REG1 {
++				regulator-name = "vdda0v9_image";
++				regulator-min-microvolt = <950000>;
++				regulator-max-microvolt = <950000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdda_0v9: LDO_REG2 {
++				regulator-name = "vdda_0v9";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <900000>;
++				regulator-max-microvolt = <900000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdda0v9_pmu: LDO_REG3 {
++				regulator-name = "vdda0v9_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <900000>;
++				regulator-max-microvolt = <900000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <900000>;
++				};
++			};
++
++			vccio_acodec: LDO_REG4 {
++				regulator-name = "vccio_acodec";
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vccio_sd: LDO_REG5 {
++				regulator-name = "vccio_sd";
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc3v3_pmu: LDO_REG6 {
++				regulator-name = "vcc3v3_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <3300000>;
++				};
++			};
++
++			vcca_1v8: LDO_REG7 {
++				regulator-name = "vcca_1v8";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcca1v8_pmu: LDO_REG8 {
++				regulator-name = "vcca1v8_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <1800000>;
++				};
++			};
++
++			vcca1v8_image: LDO_REG9 {
++				regulator-name = "vcca1v8_image";
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc_3v3: SWITCH_REG1 {
++				regulator-name = "vcc_3v3";
++				regulator-always-on;
++				regulator-boot-on;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc3v3_sd: SWITCH_REG2 {
++				regulator-name = "vcc3v3_sd";
++				regulator-always-on;
++				regulator-boot-on;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++		};
++	};
++};
++
++&i2c1 {
++	status = "okay";
++
++	hym8563: rtc@51 {
++		compatible = "haoyu,hym8563";
++		reg = <0x51>;
++		#clock-cells = <0>;
++		clock-output-names = "hym8563";
++		pinctrl-names = "default";
++		pinctrl-0 = <&hym8563_int>;
++		interrupt-parent = <&gpio0>;
++		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
++		wakeup-source;
++	};
++};
++
++&mdio1 {
++	rgmii_phy1: ethernet-phy@1 {
++		compatible = "ethernet-phy-ieee802.3-c22";
++		reg = <1>;
++		interrupt-parent = <&gpio4>;
++		interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&eth_phy_reset_pin>;
++	};
++};
++
++&pcie2x1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pcie_reset_h>;
++	reset-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
++	status = "okay";
++};
++
++&pinctrl {
++	gpio-leds {
++		lan_led_pin: lan-led-pin {
++			rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		power_led_pin: power-led-pin {
++			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		wan_led_pin: wan-led-pin {
++			rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	gmac {
++		eth_phy_reset_pin: eth-phy-reset-pin {
++			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
++		};
++	};
++
++	pcie {
++		pcie_reset_h: pcie-reset-h {
++			rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
++		};
++	};
++
++	pmic {
++		pmic_int: pmic-int {
++			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
++		};
++	};
++
++	rockchip-key {
++		reset_button_pin: reset-button-pin {
++			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
++		};
++	};
++
++	rtc {
++		hym8563_int: hym8563-int {
++			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
++		};
++	};
++
++	usb {
++		vcc5v0_usb_host_en: vcc5v0-usb-host-en {
++			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++};
++
++&pmu_io_domains {
++	status = "okay";
++	pmuio1-supply = <&vcc3v3_pmu>;
++	pmuio2-supply = <&vcc3v3_pmu>;
++	vccio1-supply = <&vccio_acodec>;
++	vccio2-supply = <&vcc_1v8>;
++	vccio3-supply = <&vccio_sd>;
++	vccio4-supply = <&vcc_3v3>;
++	vccio5-supply = <&vcc_1v8>;
++	vccio6-supply = <&vcc_3v3>;
++	vccio7-supply = <&vcc_3v3>;
++};
++
++&sdhci {
++	bus-width = <8>;
++	max-frequency = <200000000>;
++	non-removable;
++	pinctrl-names = "default";
++	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
++	status = "okay";
++};
++
++&sdmmc0 {
++	bus-width = <4>;
++	cap-mmc-highspeed;
++	cap-sd-highspeed;
++	disable-wp;
++	no-sdio;
++	no-mmc;
++	pinctrl-names = "default";
++	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
++	sd-uhs-sdr50;
++	vmmc-supply = <&vcc3v3_sd>;
++	vqmmc-supply = <&vccio_sd>;
++	status = "okay";
++};
++
++&tsadc {
++	status = "okay";
++};
++
++&uart2 {
++	status = "okay";
++};
++
++&usb2phy0 {
++	status = "okay";
++};
++
++&usb2phy0_host {
++	phy-supply = <&vcc5v0_usb>;
++	status = "okay";
++};
++
++&usb2phy0_otg {
++	status = "okay";
++};
++
++&usb_host0_xhci {
++	extcon = <&usb2phy0>;
++	status = "okay";
++};
++
++&usb_host1_xhci {
++	status = "okay";
++};
++
++&vop {
++	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
++	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
++	status = "okay";
++};
++
++&vop_mmu {
++	status = "okay";
++};

target/linux/rockchip/patches-6.6/011-02-v6.13-arm64-dts-rockchip-fix-model-name-for-FriendlyElec-NanoPi.patch

@@ -0,0 +1,38 @@
+From b5bf84206a5c77528f9dd4cbca4e72caa063c102 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <cnsztl@gmail.com>
+Date: Wed, 23 Oct 2024 03:35:26 +0800
+Subject: [PATCH] arm64: dts: rockchip: fix model name for FriendlyElec NanoPi
+ R3S
+
+Use the marketing name for model name, this matches the dt-binding.
+Also update the website url in copyright.
+
+Fixes: 50decd493c83 ("arm64: dts: rockchip: Add FriendlyARM NanoPi R3S board")
+Suggested-by: Jonas Karlman <jonas@kwiboo.se>
+Signed-off-by: Tianling Shen <cnsztl@gmail.com>
+Link: https://lore.kernel.org/r/20241022193537.1117919-2-cnsztl@gmail.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
+@@ -3,7 +3,7 @@
+  * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+  *
+  * Copyright (c) 2024 FriendlyElec Computer Tech. Co., Ltd.
+- * (http://www.friendlyarm.com)
++ * (http://www.friendlyelec.com)
+  *
+  * Copyright (c) 2024 Tianling Shen <cnsztl@gmail.com>
+  */
+@@ -17,7 +17,7 @@
+ #include "rk3566.dtsi"
+ 
+ / {
+-	model = "FriendlyARM NanoPi R3S";
++	model = "FriendlyElec NanoPi R3S";
+ 	compatible = "friendlyarm,nanopi-r3s", "rockchip,rk3566";
+ 
+ 	aliases {

target/linux/rockchip/patches-6.6/011-03-v1.13-arm64-dts-rockchip-replace-deprecated-snps-reset-props-fo.patch

@@ -0,0 +1,40 @@
+From 82b2868937883b65732da498b26366d34db61510 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <cnsztl@gmail.com>
+Date: Wed, 23 Oct 2024 03:35:27 +0800
+Subject: [PATCH] arm64: dts: rockchip: replace deprecated snps,reset props for
+ NanoPi R3S
+
+Replace deprecated snps,reset props and move them to the PHY node.
+
+Fixes: 50decd493c83 ("arm64: dts: rockchip: Add FriendlyARM NanoPi R3S board")
+Suggested-by: Jonas Karlman <jonas@kwiboo.se>
+Signed-off-by: Tianling Shen <cnsztl@gmail.com>
+Link: https://lore.kernel.org/r/20241022193537.1117919-3-cnsztl@gmail.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts | 7 +++----
+ 1 file changed, 3 insertions(+), 4 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
+@@ -149,10 +149,6 @@
+ 		     &gmac1m0_rx_bus2
+ 		     &gmac1m0_rgmii_clk_level2
+ 		     &gmac1m0_rgmii_bus_level3>;
+-	snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+-	snps,reset-active-low;
+-	/* Reset time is 20ms, 100ms for rtl8211f */
+-	snps,reset-delays-us = <0 20000 100000>;
+ 	status = "okay";
+ };
+ 
+@@ -414,6 +410,9 @@
+ 		interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
+ 		pinctrl-names = "default";
+ 		pinctrl-0 = <&eth_phy_reset_pin>;
++		reset-assert-us = <20000>;
++		reset-deassert-us = <100000>;
++		reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+ 	};
+ };
+ 

target/linux/rockchip/patches-6.6/011-04-v6.13-arm64-dts-rockchip-sort-props-in-pmu_io_domains-node-for.patch

@@ -0,0 +1,35 @@
+From 17e150fdd983c7e59b9240e34a166285f3c3fb39 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <cnsztl@gmail.com>
+Date: Wed, 23 Oct 2024 03:35:28 +0800
+Subject: [PATCH] arm64: dts: rockchip: sort props in pmu_io_domains node for
+ NanoPi R3S
+
+The status prop is typically the last prop.
+
+Fixes: 50decd493c83 ("arm64: dts: rockchip: Add FriendlyARM NanoPi R3S board")
+Suggested-by: Jonas Karlman <jonas@kwiboo.se>
+Signed-off-by: Tianling Shen <cnsztl@gmail.com>
+Link: https://lore.kernel.org/r/20241022193537.1117919-4-cnsztl@gmail.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
+@@ -476,7 +476,6 @@
+ };
+ 
+ &pmu_io_domains {
+-	status = "okay";
+ 	pmuio1-supply = <&vcc3v3_pmu>;
+ 	pmuio2-supply = <&vcc3v3_pmu>;
+ 	vccio1-supply = <&vccio_acodec>;
+@@ -486,6 +485,7 @@
+ 	vccio5-supply = <&vcc_1v8>;
+ 	vccio6-supply = <&vcc_3v3>;
+ 	vccio7-supply = <&vcc_3v3>;
++	status = "okay";
+ };
+ 
+ &sdhci {

target/linux/rockchip/patches-6.6/011-05-v6.13-arm64-dts-rockchip-enable-eMMC-HS200-mode-for-NanoPi-R3S.patch

@@ -0,0 +1,26 @@
+From 1b5365034410f1ca21adadadd492b99bdf4f2c55 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <cnsztl@gmail.com>
+Date: Wed, 23 Oct 2024 03:35:29 +0800
+Subject: [PATCH] arm64: dts: rockchip: enable eMMC HS200 mode for NanoPi R3S
+
+It is required to boot from eMMC without additional patch in u-boot.
+
+Fixes: 50decd493c83 ("arm64: dts: rockchip: Add FriendlyARM NanoPi R3S board")
+Suggested-by: Jonas Karlman <jonas@kwiboo.se>
+Signed-off-by: Tianling Shen <cnsztl@gmail.com>
+Link: https://lore.kernel.org/r/20241022193537.1117919-5-cnsztl@gmail.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
+@@ -491,6 +491,7 @@
+ &sdhci {
+ 	bus-width = <8>;
+ 	max-frequency = <200000000>;
++	mmc-hs200-1_8v;
+ 	non-removable;
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;

target/linux/rockchip/patches-6.6/011-06-v6.13-arm64-dts-rockchip-reorder-mmc-aliases-for-NanoPi-R3S.patch

@@ -0,0 +1,31 @@
+From b7cd1115456d312f8c5e60c80fdc35fd35ea6eab Mon Sep 17 00:00:00 2001
+From: Tianling Shen <cnsztl@gmail.com>
+Date: Wed, 23 Oct 2024 03:35:30 +0800
+Subject: [PATCH] arm64: dts: rockchip: reorder mmc aliases for NanoPi R3S
+
+Typically any non-removable storage (emmc) is listed before removable
+storage (sd-card) options. Also U-Boot will try to override and use
+mmc0=sdhci and mmc1=sdmmc0 for all rk356x boards.
+
+Fixes: 50decd493c83 ("arm64: dts: rockchip: Add FriendlyARM NanoPi R3S board")
+Suggested-by: Jonas Karlman <jonas@kwiboo.se>
+Signed-off-by: Tianling Shen <cnsztl@gmail.com>
+Link: https://lore.kernel.org/r/20241022193537.1117919-6-cnsztl@gmail.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
+@@ -22,8 +22,8 @@
+ 
+ 	aliases {
+ 		ethernet0 = &gmac1;
+-		mmc0 = &sdmmc0;
+-		mmc1 = &sdhci;
++		mmc0 = &sdhci;
++		mmc1 = &sdmmc0;
+ 	};
+ 
+ 	chosen: chosen {

target/linux/rockchip/patches-6.6/054-01-v6.7-arm64-dts-rockchip-Add-Orange-Pi-5.patch

@@ -21,7 +21,7 @@ Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 
 --- a/arch/arm64/boot/dts/rockchip/Makefile
 +++ b/arch/arm64/boot/dts/rockchip/Makefile
-@@ -109,3 +109,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ro
+@@ -110,3 +110,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ro
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb

target/linux/rockchip/patches-6.6/055-01-v6.7-arm64-dts-rockchip-Add-board-device-tree-for.patch

@@ -36,7 +36,7 @@ Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 
 --- a/arch/arm64/boot/dts/rockchip/Makefile
 +++ b/arch/arm64/boot/dts/rockchip/Makefile
-@@ -105,6 +105,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ed
+@@ -106,6 +106,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ed
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb

target/linux/rockchip/patches-6.6/056-01-v6.10-arm64-dts-rockchip-Add-ArmSom-Sige7-board.patch

@@ -44,7 +44,7 @@ Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 
 --- a/arch/arm64/boot/dts/rockchip/Makefile
 +++ b/arch/arm64/boot/dts/rockchip/Makefile
-@@ -101,6 +101,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-ra
+@@ -102,6 +102,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-ra
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3b.dtb

target/linux/rockchip/patches-6.6/100-rockchip-use-system-LED-for-OpenWrt.patch

@@ -209,6 +209,28 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
  	/delete-node/ display-subsystem;
  
  	gpio-leds {
+--- a/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
+@@ -24,6 +24,11 @@
+ 		ethernet0 = &gmac1;
+ 		mmc0 = &sdhci;
+ 		mmc1 = &sdmmc0;
++
++		led-boot = &power_led;
++		led-failsafe = &power_led;
++		led-running = &power_led;
++		led-upgrade = &power_led;
+ 	};
+ 
+ 	chosen: chosen {
+@@ -52,7 +57,6 @@
+ 			color = <LED_COLOR_ID_RED>;
+ 			function = LED_FUNCTION_POWER;
+ 			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+-			default-state = "on";
+ 		};
+ 
+ 		lan_led: led-1 {
 --- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
 +++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
 @@ -17,7 +17,7 @@

target/linux/rockchip/patches-6.6/602-net-ethernet-r8169-add-devname-configuration-from-OF.patch

@@ -8,7 +8,7 @@
  #include <linux/tcp.h>
  #include <linux/interrupt.h>
  #include <linux/dma-mapping.h>
-@@ -5371,6 +5372,7 @@ static int rtl_init_one(struct pci_dev *
+@@ -5373,6 +5374,7 @@ static int rtl_init_one(struct pci_dev *
  	int jumbo_max, region, rc;
  	enum mac_version chipset;
  	struct net_device *dev;
@@ -16,7 +16,7 @@
  	u32 txconfig;
  	u16 xid;
  
-@@ -5378,6 +5380,9 @@ static int rtl_init_one(struct pci_dev *
+@@ -5380,6 +5382,9 @@ static int rtl_init_one(struct pci_dev *
  	if (!dev)
  		return -ENOMEM;
  

target/linux/rockchip/patches-6.6/610-arm64-rockchip-add-OF-node-for-eth.patch

@@ -101,6 +101,35 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
 +	};
  };
  
+ &pinctrl {
+--- a/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
+@@ -414,6 +414,7 @@
+ 		interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
+ 		pinctrl-names = "default";
+ 		pinctrl-0 = <&eth_phy_reset_pin>;
++		realtek,led-data = <0xae00>;
+ 		reset-assert-us = <20000>;
+ 		reset-deassert-us = <100000>;
+ 		reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+@@ -425,6 +426,18 @@
+ 	pinctrl-0 = <&pcie_reset_h>;
+ 	reset-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+ 	status = "okay";
++
++	pcie@0,0 {
++		reg = <0x00000000 0 0 0 0>;
++		#address-cells = <3>;
++		#size-cells = <2>;
++
++		rtl8168: pcie@1,0 {
++			compatible = "pci10ec,8168";
++			reg = <0x000000 0 0 0 0>;
++			realtek,led-data = <0x870>;
++		};
++	};
+ };
+ 
  &pinctrl {
 --- a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
 +++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi

target/linux/rockchip/patches-6.6/701-irqchip-gic-v3-add-hackaround-for-rk3568-its.patch

@@ -18,7 +18,7 @@ Subject: [PATCH] irqchip: gic-v3: add hackaround for rk3568 its
  #endif /* _IRQ_GIC_COMMON_H */
 --- a/drivers/irqchip/irq-gic-v3-its.c
 +++ b/drivers/irqchip/irq-gic-v3-its.c
-@@ -2186,6 +2186,11 @@ static struct page *its_allocate_prop_ta
+@@ -2192,6 +2192,11 @@ static struct page *its_allocate_prop_ta
  {
  	struct page *prop_page;
  
@@ -30,7 +30,7 @@ Subject: [PATCH] irqchip: gic-v3: add hackaround for rk3568 its
  	prop_page = alloc_pages(gfp_flags, get_order(LPI_PROPBASE_SZ));
  	if (!prop_page)
  		return NULL;
-@@ -2308,6 +2313,7 @@ static int its_setup_baser(struct its_no
+@@ -2314,6 +2319,7 @@ static int its_setup_baser(struct its_no
  	u64 baser_phys, tmp;
  	u32 alloc_pages, psz;
  	struct page *page;
@@ -38,7 +38,7 @@ Subject: [PATCH] irqchip: gic-v3: add hackaround for rk3568 its
  	void *base;
  
  	psz = baser->psz;
-@@ -2320,7 +2326,10 @@ static int its_setup_baser(struct its_no
+@@ -2326,7 +2332,10 @@ static int its_setup_baser(struct its_no
  		order = get_order(GITS_BASER_PAGES_MAX * psz);
  	}
  
@@ -50,7 +50,7 @@ Subject: [PATCH] irqchip: gic-v3: add hackaround for rk3568 its
  	if (!page)
  		return -ENOMEM;
  
-@@ -2960,6 +2969,10 @@ static struct page *its_allocate_pending
+@@ -2966,6 +2975,10 @@ static struct page *its_allocate_pending
  {
  	struct page *pend_page;
  
@@ -61,7 +61,7 @@ Subject: [PATCH] irqchip: gic-v3: add hackaround for rk3568 its
  	pend_page = alloc_pages(gfp_flags | __GFP_ZERO,
  				get_order(LPI_PENDBASE_SZ));
  	if (!pend_page)
-@@ -3308,7 +3321,12 @@ static bool its_alloc_table_entry(struct
+@@ -3314,7 +3327,12 @@ static bool its_alloc_table_entry(struct
  
  	/* Allocate memory for 2nd level table */
  	if (!table[idx]) {
@@ -75,7 +75,7 @@ Subject: [PATCH] irqchip: gic-v3: add hackaround for rk3568 its
  					get_order(baser->psz));
  		if (!page)
  			return false;
-@@ -3392,6 +3410,7 @@ static struct its_device *its_create_dev
+@@ -3398,6 +3416,7 @@ static struct its_device *its_create_dev
  	unsigned long *lpi_map = NULL;
  	unsigned long flags;
  	u16 *col_map = NULL;
@@ -83,7 +83,7 @@ Subject: [PATCH] irqchip: gic-v3: add hackaround for rk3568 its
  	void *itt;
  	int lpi_base;
  	int nr_lpis;
-@@ -3404,7 +3423,11 @@ static struct its_device *its_create_dev
+@@ -3410,7 +3429,11 @@ static struct its_device *its_create_dev
  	if (WARN_ON(!is_power_of_2(nvecs)))
  		nvecs = roundup_pow_of_two(nvecs);
  
@@ -96,7 +96,7 @@ Subject: [PATCH] irqchip: gic-v3: add hackaround for rk3568 its
  	/*
  	 * Even if the device wants a single LPI, the ITT must be
  	 * sized as a power of two (and you need at least one bit...).
-@@ -3412,7 +3435,7 @@ static struct its_device *its_create_dev
+@@ -3418,7 +3441,7 @@ static struct its_device *its_create_dev
  	nr_ites = max(2, nvecs);
  	sz = nr_ites * (FIELD_GET(GITS_TYPER_ITT_ENTRY_SIZE, its->typer) + 1);
  	sz = max(sz, ITS_ITT_ALIGN) + ITS_ITT_ALIGN - 1;
@@ -105,7 +105,7 @@ Subject: [PATCH] irqchip: gic-v3: add hackaround for rk3568 its
  	if (alloc_lpis) {
  		lpi_map = its_lpi_alloc(nvecs, &lpi_base, &nr_lpis);
  		if (lpi_map)
-@@ -4730,6 +4753,21 @@ static bool __maybe_unused its_enable_qu
+@@ -4742,6 +4765,21 @@ static bool __maybe_unused its_enable_qu
  	return true;
  }
  
@@ -127,7 +127,7 @@ Subject: [PATCH] irqchip: gic-v3: add hackaround for rk3568 its
  static bool __maybe_unused its_enable_rk3588001(void *data)
  {
  	struct its_node *its = data;
-@@ -4800,6 +4838,12 @@ static const struct gic_quirk its_quirks
+@@ -4812,6 +4850,12 @@ static const struct gic_quirk its_quirks
  #endif
  #ifdef CONFIG_ROCKCHIP_ERRATUM_3588001
  	{
@@ -140,7 +140,7 @@ Subject: [PATCH] irqchip: gic-v3: add hackaround for rk3568 its
  		.desc   = "ITS: Rockchip erratum RK3588001",
  		.iidr   = 0x0201743b,
  		.mask   = 0xffffffff,
-@@ -5065,6 +5109,7 @@ static int __init its_probe_one(struct i
+@@ -5077,6 +5121,7 @@ static int __init its_probe_one(struct i
  {
  	u64 baser, tmp;
  	struct page *page;
@@ -148,7 +148,7 @@ Subject: [PATCH] irqchip: gic-v3: add hackaround for rk3568 its
  	u32 ctlr;
  	int err;
  
-@@ -5100,7 +5145,9 @@ static int __init its_probe_one(struct i
+@@ -5112,7 +5157,9 @@ static int __init its_probe_one(struct i
  		}
  	}
  

target/linux/rockchip/patches-6.6/900-arm64-boot-add-dts-files.patch

@@ -16,10 +16,10 @@
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-r4s-enterprise.dtb
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb
-@@ -89,19 +91,24 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-so
+@@ -90,19 +92,24 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-so
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-model-a.dtb
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-nanopi-r3s.dtb
 +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-armsom-sige3.dtb
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
@@ -41,7 +41,7 @@
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
-@@ -110,5 +117,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-or
+@@ -111,5 +118,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-or
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb