fish/immortalwrt
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

ipq40xx/ipq806x: remove kernel 4.x support

Browse Source 
These targets only support kernel 5.4 been a while, kernel 4.x does
not seem to be needed, and removing it will make upcoming driver
updates easier. Thus, remove it.
This commit is contained in:
AmadeusGhost 2020-10-31 11:15:37 +08:00
parent aa2df753cf
commit 2c06a8218b
202 changed files with 0 additions and 56320 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

514
target/linux/ipq40xx/config-4.19
View File

@ -1,514 +0,0 @@
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_APQ_GCC_8084 is not set
# CONFIG_APQ_MMCC_8084 is not set
CONFIG_AR40XX_PHY=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_ARCH_HAS_KCOV=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_ARCH_HAS_PHYS_TO_DMA=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_IPQ40XX=y
# CONFIG_ARCH_MDM9615 is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_ARCH_MSM8960 is not set
# CONFIG_ARCH_MSM8974 is not set
# CONFIG_ARCH_MSM8X60 is not set
CONFIG_ARCH_MULTIPLATFORM=y
CONFIG_ARCH_MULTI_V6_V7=y
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_NR_GPIO=0
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
CONFIG_ARCH_QCOM=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARM=y
CONFIG_ARM_AMBA=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
# CONFIG_ARM_ATAG_DTB_COMPAT is not set
CONFIG_ARM_CPUIDLE=y
CONFIG_ARM_CPU_SUSPEND=y
# CONFIG_ARM_CPU_TOPOLOGY is not set
CONFIG_ARM_CRYPTO=y
CONFIG_ARM_GIC=y
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_L1_CACHE_SHIFT_6=y
# CONFIG_ARM_LPAE is not set
CONFIG_ARM_PATCH_IDIV=y
CONFIG_ARM_PATCH_PHYS_VIRT=y
# CONFIG_ARM_SMMU is not set
# CONFIG_ARM_SP805_WATCHDOG is not set
CONFIG_ARM_THUMB=y
# CONFIG_ARM_THUMBEE is not set
CONFIG_ARM_UNWIND=y
CONFIG_ARM_VIRT_EXT=y
CONFIG_AT803X_PHY=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BOUNCE=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKSRC_QCOM=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_CPUFREQ_DT=y
CONFIG_CPUFREQ_DT_PLATDEV=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_HAS_ASID=y
# CONFIG_CPU_ICACHE_DISABLE is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_PM=y
CONFIG_CPU_RMAP=y
CONFIG_CPU_SPECTRE=y
CONFIG_CPU_THERMAL=y
CONFIG_CPU_THUMB_CAPABLE=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_V7=y
CONFIG_CRC16=y
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_SLICEBY8=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_AES_ARM=y
CONFIG_CRYPTO_AES_ARM_BS=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_DEV_QCE=y
# CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL is not set
# CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA is not set
CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER=y
CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN=512
CONFIG_CRYPTO_DEV_QCOM_RNG=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_GF128MUL=y
# CONFIG_CRYPTO_GHASH_ARM_CE is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_SEQIV=y
# CONFIG_CRYPTO_SHA1_ARM_CE is not set
# CONFIG_CRYPTO_SHA1_ARM_NEON is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA256_ARM=y
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_XTS=y
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
# CONFIG_DEBUG_USER is not set
CONFIG_DMADEVICES=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_OF=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DTC=y
CONFIG_DT_IDLE_STATES=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EEPROM_AT24=y
CONFIG_ESSEDMA=y
CONFIG_EXTCON=y
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PINCONF=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_74X164=y
CONFIG_GPIO_WATCHDOG=y
# CONFIG_GPIO_WATCHDOG_ARCH_INITCALL is not set
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDEN_BRANCH_PREDICTOR=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_ARM_ARCH_TIMER=y
CONFIG_HAVE_ARM_SMCCC=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_SMP=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_UID16=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_HWSPINLOCK=y
CONFIG_HWSPINLOCK_QCOM=y
CONFIG_HW_RANDOM=y
CONFIG_HZ_FIXED=0
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_QUP=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
CONFIG_IOMMU_SUPPORT=y
CONFIG_IPQ_GCC_4019=y
# CONFIG_IPQ_GCC_806X is not set
# CONFIG_IPQ_GCC_8074 is not set
# CONFIG_IPQ_LCC_806X is not set
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LIBFDT=y
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_GPIO=y
CONFIG_MDIO_IPQ40XX=y
# CONFIG_MDM_GCC_9615 is not set
# CONFIG_MDM_LCC_9615 is not set
CONFIG_MEMFD_CREATE=y
# CONFIG_MFD_QCOM_RPM is not set
# CONFIG_MFD_SPMI_PMIC is not set
CONFIG_MFD_SYSCON=y
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
CONFIG_MIGHT_HAVE_PCI=y
CONFIG_MIGRATION=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_MSM=y
# CONFIG_MMC_SDHCI_PCI is not set
CONFIG_MMC_SDHCI_PLTFM=y
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MSM_GCC_8660 is not set
# CONFIG_MSM_GCC_8916 is not set
# CONFIG_MSM_GCC_8960 is not set
# CONFIG_MSM_GCC_8974 is not set
# CONFIG_MSM_GCC_8994 is not set
# CONFIG_MSM_GCC_8996 is not set
# CONFIG_MSM_GCC_8998 is not set
# CONFIG_MSM_LCC_8960 is not set
# CONFIG_MSM_MMCC_8960 is not set
# CONFIG_MSM_MMCC_8974 is not set
# CONFIG_MSM_MMCC_8996 is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_QCOM=y
CONFIG_MTD_SPI_NAND=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPLIT_FIT_FW=y
CONFIG_MTD_SPLIT_WRGG_FW=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEON=y
# CONFIG_NET_DSA_VITESSE_VSC73XX is not set
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NLS=y
CONFIG_NO_BOOTMEM=y
CONFIG_NO_HZ=y
CONFIG_NO_HZ_COMMON=y
CONFIG_NO_HZ_IDLE=y
CONFIG_NR_CPUS=4
CONFIG_NVMEM=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_KOBJ=y
CONFIG_OF_MDIO=y
CONFIG_OF_NET=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OLD_SIGACTION=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OPTEE=y
CONFIG_OPTEE_SHM_NUM_PRIV_PAGES=1
CONFIG_PADATA=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PCI=y
CONFIG_PCIEAER=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_QCOM=y
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_V3_SEMI is not set
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
# CONFIG_PHY_QCOM_APQ8064_SATA is not set
CONFIG_PHY_QCOM_IPQ4019_USB=y
# CONFIG_PHY_QCOM_IPQ806X_SATA is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_UFS is not set
CONFIG_PINCTRL=y
# CONFIG_PINCTRL_APQ8064 is not set
# CONFIG_PINCTRL_APQ8084 is not set
CONFIG_PINCTRL_IPQ4019=y
# CONFIG_PINCTRL_IPQ8064 is not set
# CONFIG_PINCTRL_IPQ8074 is not set
# CONFIG_PINCTRL_MDM9615 is not set
CONFIG_PINCTRL_MSM=y
# CONFIG_PINCTRL_MSM8660 is not set
# CONFIG_PINCTRL_MSM8916 is not set
# CONFIG_PINCTRL_MSM8960 is not set
# CONFIG_PINCTRL_MSM8994 is not set
# CONFIG_PINCTRL_MSM8996 is not set
# CONFIG_PINCTRL_MSM8998 is not set
# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
# CONFIG_PINCTRL_SDM845 is not set
CONFIG_PM_OPP=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_MSM=y
CONFIG_POWER_SUPPLY=y
CONFIG_PPS=y
CONFIG_PRINTK_TIME=y
CONFIG_PTP_1588_CLOCK=y
CONFIG_QCOM_A53PLL=y
CONFIG_QCOM_BAM_DMA=y
# CONFIG_QCOM_COMMAND_DB is not set
# CONFIG_QCOM_EBI2 is not set
# CONFIG_QCOM_GENI_SE is not set
# CONFIG_QCOM_GSBI is not set
# CONFIG_QCOM_IOMMU is not set
# CONFIG_QCOM_LLCC is not set
# CONFIG_QCOM_PDC is not set
CONFIG_QCOM_PM=y
CONFIG_QCOM_QFPROM=y
# CONFIG_QCOM_RMTFS_MEM is not set
CONFIG_QCOM_SCM=y
CONFIG_QCOM_SCM_32=y
# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set
CONFIG_QCOM_SMEM=y
# CONFIG_QCOM_SMSM is not set
CONFIG_QCOM_TCSR=y
# CONFIG_QCOM_TSENS is not set
CONFIG_QCOM_WDT=y
# CONFIG_QRTR is not set
CONFIG_RAS=y
CONFIG_RATIONAL=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_REFCOUNT_FULL=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_SPI=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_QCOM_SPMI is not set
CONFIG_REGULATOR_VCTRL=y
CONFIG_REGULATOR_VQMMC_IPQ4019=y
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_QCOM_AOSS is not set
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_I2C_AND_SPI=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_SDM_DISPCC_845 is not set
# CONFIG_SDM_GCC_845 is not set
# CONFIG_SDM_VIDEOCC_845 is not set
CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_AMBA_PL011 is not set
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
# CONFIG_SFP is not set
CONFIG_SGL_ALLOC=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y
CONFIG_SPI_QUP=y
CONFIG_SPMI=y
CONFIG_SPMI_MSM_PMIC_ARB=y
# CONFIG_SPMI_PMIC_CLKDIV is not set
CONFIG_SRCU=y
CONFIG_SWCONFIG=y
CONFIG_SWCONFIG_LEDS=y
CONFIG_SWPHY=y
CONFIG_SWP_EMULATE=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_TEE=y
CONFIG_THERMAL=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_OF=y
# CONFIG_THUMB2_KERNEL is not set
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_TREE_RCU=y
CONFIG_TREE_SRCU=y
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_USB=y
CONFIG_USB_COMMON=y
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_WATCHDOG_CORE=y
CONFIG_XPS=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y

0
target/linux/ipq40xx/files-5.4/drivers/net/ethernet/qualcomm/essedma/Makefile → target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/Makefile
View File

0
target/linux/ipq40xx/files-5.4/drivers/net/ethernet/qualcomm/essedma/edma.c → target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma.c
View File

0
target/linux/ipq40xx/files-5.4/drivers/net/ethernet/qualcomm/essedma/edma.h → target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma.h
View File

0
target/linux/ipq40xx/files-5.4/drivers/net/ethernet/qualcomm/essedma/edma_axi.c → target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma_axi.c
View File

0
target/linux/ipq40xx/files-5.4/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c → target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c
View File

0
target/linux/ipq40xx/files-5.4/drivers/net/ethernet/qualcomm/essedma/ess_edma.h → target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/ess_edma.h
View File

0
target/linux/ipq40xx/files-5.4/drivers/net/phy/ar40xx.c → target/linux/ipq40xx/files/drivers/net/phy/ar40xx.c
View File

0
target/linux/ipq40xx/files-5.4/drivers/net/phy/ar40xx.h → target/linux/ipq40xx/files/drivers/net/phy/ar40xx.h
View File

31
target/linux/ipq40xx/patches-4.19/039-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch
View File

@ -1,31 +0,0 @@
From: Eneas U de Queiroz <cotequeiroz@gmail.com>
Subject: [PATCH] crypto: qce - add CRYPTO_ALG_KERN_DRIVER_ONLY flag
Set the CRYPTO_ALG_KERN_DRIVER_ONLY flag to all algorithms exposed by
the qce driver, since they are all hardware accelerated, accessible
through a kernel driver only, and not available directly to userspace.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
--- a/drivers/crypto/qce/ablkcipher.c
+++ b/drivers/crypto/qce/ablkcipher.c
@@ -370,7 +370,7 @@ static int qce_ablkcipher_register_one(c
alg->cra_priority = 300;
alg->cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC |
- CRYPTO_ALG_NEED_FALLBACK;
+ CRYPTO_ALG_NEED_FALLBACK | CRYPTO_ALG_KERN_DRIVER_ONLY;
alg->cra_ctxsize = sizeof(struct qce_cipher_ctx);
alg->cra_alignmask = 0;
alg->cra_type = &crypto_ablkcipher_type;
--- a/drivers/crypto/qce/sha.c
+++ b/drivers/crypto/qce/sha.c
@@ -503,7 +503,7 @@ static int qce_ahash_register_one(const
base = &alg->halg.base;
base->cra_blocksize = def->blocksize;
base->cra_priority = 300;
- base->cra_flags = CRYPTO_ALG_ASYNC;
+ base->cra_flags = CRYPTO_ALG_ASYNC | CRYPTO_ALG_KERN_DRIVER_ONLY;
base->cra_ctxsize = sizeof(struct qce_sha_ctx);
base->cra_alignmask = 0;
base->cra_module = THIS_MODULE;

973
target/linux/ipq40xx/patches-4.19/040-crypto-qce-switch-to-skcipher-API.patch
View File

@ -1,973 +0,0 @@
From f441873642eebf20566c18d2966a8cd4b433ec1c Mon Sep 17 00:00:00 2001
From: Ard Biesheuvel <ardb@kernel.org>
Date: Tue, 5 Nov 2019 14:28:17 +0100
Subject: [PATCH] crypto: qce - switch to skcipher API
Commit 7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
blkcipher code in the near future.
Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Backported-to-4.19-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
--- a/drivers/crypto/qce/Makefile
+++ b/drivers/crypto/qce/Makefile
@@ -4,4 +4,4 @@ qcrypto-objs := core.o \
common.o \
dma.o \
sha.o \
- ablkcipher.o
+ skcipher.o
--- a/drivers/crypto/qce/cipher.h
+++ b/drivers/crypto/qce/cipher.h
@@ -53,12 +53,12 @@ struct qce_cipher_reqctx {
unsigned int cryptlen;
};
-static inline struct qce_alg_template *to_cipher_tmpl(struct crypto_tfm *tfm)
+static inline struct qce_alg_template *to_cipher_tmpl(struct crypto_skcipher *tfm)
{
- struct crypto_alg *alg = tfm->__crt_alg;
- return container_of(alg, struct qce_alg_template, alg.crypto);
+ struct skcipher_alg *alg = crypto_skcipher_alg(tfm);
+ return container_of(alg, struct qce_alg_template, alg.skcipher);
}
-extern const struct qce_algo_ops ablkcipher_ops;
+extern const struct qce_algo_ops skcipher_ops;
#endif /* _CIPHER_H_ */
--- a/drivers/crypto/qce/common.c
+++ b/drivers/crypto/qce/common.c
@@ -312,13 +312,13 @@ go_proc:
return 0;
}
-static int qce_setup_regs_ablkcipher(struct crypto_async_request *async_req,
+static int qce_setup_regs_skcipher(struct crypto_async_request *async_req,
u32 totallen, u32 offset)
{
- struct ablkcipher_request *req = ablkcipher_request_cast(async_req);
- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req);
+ struct skcipher_request *req = skcipher_request_cast(async_req);
+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req);
struct qce_cipher_ctx *ctx = crypto_tfm_ctx(async_req->tfm);
- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm);
+ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req));
struct qce_device *qce = tmpl->qce;
__be32 enckey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(__be32)] = {0};
__be32 enciv[QCE_MAX_IV_SIZE / sizeof(__be32)] = {0};
@@ -397,8 +397,8 @@ int qce_start(struct crypto_async_reques
u32 offset)
{
switch (type) {
- case CRYPTO_ALG_TYPE_ABLKCIPHER:
- return qce_setup_regs_ablkcipher(async_req, totallen, offset);
+ case CRYPTO_ALG_TYPE_SKCIPHER:
+ return qce_setup_regs_skcipher(async_req, totallen, offset);
case CRYPTO_ALG_TYPE_AHASH:
return qce_setup_regs_ahash(async_req, totallen, offset);
default:
--- a/drivers/crypto/qce/common.h
+++ b/drivers/crypto/qce/common.h
@@ -18,6 +18,7 @@
#include <linux/types.h>
#include <crypto/aes.h>
#include <crypto/hash.h>
+#include <crypto/internal/skcipher.h>
/* key size in bytes */
#define QCE_SHA_HMAC_KEY_SIZE 64
@@ -87,7 +88,7 @@ struct qce_alg_template {
unsigned long alg_flags;
const u32 *std_iv;
union {
- struct crypto_alg crypto;
+ struct skcipher_alg skcipher;
struct ahash_alg ahash;
} alg;
struct qce_device *qce;
--- a/drivers/crypto/qce/core.c
+++ b/drivers/crypto/qce/core.c
@@ -30,7 +30,7 @@
#define QCE_QUEUE_LENGTH 1
static const struct qce_algo_ops *qce_ops[] = {
- &ablkcipher_ops,
+ &skcipher_ops,
&ahash_ops,
};
--- a/drivers/crypto/qce/ablkcipher.c
+++ /dev/null
@@ -1,431 +0,0 @@
-/*
- * Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/types.h>
-#include <crypto/aes.h>
-#include <crypto/des.h>
-#include <crypto/internal/skcipher.h>
-
-#include "cipher.h"
-
-static LIST_HEAD(ablkcipher_algs);
-
-static void qce_ablkcipher_done(void *data)
-{
- struct crypto_async_request *async_req = data;
- struct ablkcipher_request *req = ablkcipher_request_cast(async_req);
- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req);
- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm);
- struct qce_device *qce = tmpl->qce;
- enum dma_data_direction dir_src, dir_dst;
- u32 status;
- int error;
- bool diff_dst;
-
- diff_dst = (req->src != req->dst) ? true : false;
- dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL;
- dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL;
-
- error = qce_dma_terminate_all(&qce->dma);
- if (error)
- dev_dbg(qce->dev, "ablkcipher dma termination error (%d)\n",
- error);
-
- if (diff_dst)
- dma_unmap_sg(qce->dev, rctx->src_sg, rctx->src_nents, dir_src);
- dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
-
- sg_free_table(&rctx->dst_tbl);
-
- error = qce_check_status(qce, &status);
- if (error < 0)
- dev_dbg(qce->dev, "ablkcipher operation error (%x)\n", status);
-
- qce->async_req_done(tmpl->qce, error);
-}
-
-static int
-qce_ablkcipher_async_req_handle(struct crypto_async_request *async_req)
-{
- struct ablkcipher_request *req = ablkcipher_request_cast(async_req);
- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req);
- struct crypto_ablkcipher *ablkcipher = crypto_ablkcipher_reqtfm(req);
- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm);
- struct qce_device *qce = tmpl->qce;
- enum dma_data_direction dir_src, dir_dst;
- struct scatterlist *sg;
- bool diff_dst;
- gfp_t gfp;
- int ret;
-
- rctx->iv = req->info;
- rctx->ivsize = crypto_ablkcipher_ivsize(ablkcipher);
- rctx->cryptlen = req->nbytes;
-
- diff_dst = (req->src != req->dst) ? true : false;
- dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL;
- dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL;
-
- rctx->src_nents = sg_nents_for_len(req->src, req->nbytes);
- if (diff_dst)
- rctx->dst_nents = sg_nents_for_len(req->dst, req->nbytes);
- else
- rctx->dst_nents = rctx->src_nents;
- if (rctx->src_nents < 0) {
- dev_err(qce->dev, "Invalid numbers of src SG.\n");
- return rctx->src_nents;
- }
- if (rctx->dst_nents < 0) {
- dev_err(qce->dev, "Invalid numbers of dst SG.\n");
- return -rctx->dst_nents;
- }
-
- rctx->dst_nents += 1;
-
- gfp = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ?
- GFP_KERNEL : GFP_ATOMIC;
-
- ret = sg_alloc_table(&rctx->dst_tbl, rctx->dst_nents, gfp);
- if (ret)
- return ret;
-
- sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ);
-
- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst);
- if (IS_ERR(sg)) {
- ret = PTR_ERR(sg);
- goto error_free;
- }
-
- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg);
- if (IS_ERR(sg)) {
- ret = PTR_ERR(sg);
- goto error_free;
- }
-
- sg_mark_end(sg);
- rctx->dst_sg = rctx->dst_tbl.sgl;
-
- ret = dma_map_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
- if (ret < 0)
- goto error_free;
-
- if (diff_dst) {
- ret = dma_map_sg(qce->dev, req->src, rctx->src_nents, dir_src);
- if (ret < 0)
- goto error_unmap_dst;
- rctx->src_sg = req->src;
- } else {
- rctx->src_sg = rctx->dst_sg;
- }
-
- ret = qce_dma_prep_sgs(&qce->dma, rctx->src_sg, rctx->src_nents,
- rctx->dst_sg, rctx->dst_nents,
- qce_ablkcipher_done, async_req);
- if (ret)
- goto error_unmap_src;
-
- qce_dma_issue_pending(&qce->dma);
-
- ret = qce_start(async_req, tmpl->crypto_alg_type, req->nbytes, 0);
- if (ret)
- goto error_terminate;
-
- return 0;
-
-error_terminate:
- qce_dma_terminate_all(&qce->dma);
-error_unmap_src:
- if (diff_dst)
- dma_unmap_sg(qce->dev, req->src, rctx->src_nents, dir_src);
-error_unmap_dst:
- dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
-error_free:
- sg_free_table(&rctx->dst_tbl);
- return ret;
-}
-
-static int qce_ablkcipher_setkey(struct crypto_ablkcipher *ablk, const u8 *key,
- unsigned int keylen)
-{
- struct crypto_tfm *tfm = crypto_ablkcipher_tfm(ablk);
- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm);
- unsigned long flags = to_cipher_tmpl(tfm)->alg_flags;
- int ret;
-
- if (!key || !keylen)
- return -EINVAL;
-
- if (IS_AES(flags)) {
- switch (keylen) {
- case AES_KEYSIZE_128:
- case AES_KEYSIZE_256:
- break;
- default:
- goto fallback;
- }
- } else if (IS_DES(flags)) {
- u32 tmp[DES_EXPKEY_WORDS];
-
- ret = des_ekey(tmp, key);
- if (!ret && crypto_ablkcipher_get_flags(ablk) &
- CRYPTO_TFM_REQ_WEAK_KEY)
- goto weakkey;
- }
-
- ctx->enc_keylen = keylen;
- memcpy(ctx->enc_key, key, keylen);
- return 0;
-fallback:
- ret = crypto_skcipher_setkey(ctx->fallback, key, keylen);
- if (!ret)
- ctx->enc_keylen = keylen;
- return ret;
-weakkey:
- crypto_ablkcipher_set_flags(ablk, CRYPTO_TFM_RES_WEAK_KEY);
- return -EINVAL;
-}
-
-static int qce_ablkcipher_crypt(struct ablkcipher_request *req, int encrypt)
-{
- struct crypto_tfm *tfm =
- crypto_ablkcipher_tfm(crypto_ablkcipher_reqtfm(req));
- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm);
- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req);
- struct qce_alg_template *tmpl = to_cipher_tmpl(tfm);
- int ret;
-
- rctx->flags = tmpl->alg_flags;
- rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT;
-
- if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 &&
- ctx->enc_keylen != AES_KEYSIZE_256) {
- SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback);
-
- skcipher_request_set_tfm(subreq, ctx->fallback);
- skcipher_request_set_callback(subreq, req->base.flags,
- NULL, NULL);
- skcipher_request_set_crypt(subreq, req->src, req->dst,
- req->nbytes, req->info);
- ret = encrypt ? crypto_skcipher_encrypt(subreq) :
- crypto_skcipher_decrypt(subreq);
- skcipher_request_zero(subreq);
- return ret;
- }
-
- return tmpl->qce->async_req_enqueue(tmpl->qce, &req->base);
-}
-
-static int qce_ablkcipher_encrypt(struct ablkcipher_request *req)
-{
- return qce_ablkcipher_crypt(req, 1);
-}
-
-static int qce_ablkcipher_decrypt(struct ablkcipher_request *req)
-{
- return qce_ablkcipher_crypt(req, 0);
-}
-
-static int qce_ablkcipher_init(struct crypto_tfm *tfm)
-{
- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm);
-
- memset(ctx, 0, sizeof(*ctx));
- tfm->crt_ablkcipher.reqsize = sizeof(struct qce_cipher_reqctx);
-
- ctx->fallback = crypto_alloc_skcipher(crypto_tfm_alg_name(tfm), 0,
- CRYPTO_ALG_ASYNC |
- CRYPTO_ALG_NEED_FALLBACK);
- return PTR_ERR_OR_ZERO(ctx->fallback);
-}
-
-static void qce_ablkcipher_exit(struct crypto_tfm *tfm)
-{
- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm);
-
- crypto_free_skcipher(ctx->fallback);
-}
-
-struct qce_ablkcipher_def {
- unsigned long flags;
- const char *name;
- const char *drv_name;
- unsigned int blocksize;
- unsigned int ivsize;
- unsigned int min_keysize;
- unsigned int max_keysize;
-};
-
-static const struct qce_ablkcipher_def ablkcipher_def[] = {
- {
- .flags = QCE_ALG_AES | QCE_MODE_ECB,
- .name = "ecb(aes)",
- .drv_name = "ecb-aes-qce",
- .blocksize = AES_BLOCK_SIZE,
- .ivsize = AES_BLOCK_SIZE,
- .min_keysize = AES_MIN_KEY_SIZE,
- .max_keysize = AES_MAX_KEY_SIZE,
- },
- {
- .flags = QCE_ALG_AES | QCE_MODE_CBC,
- .name = "cbc(aes)",
- .drv_name = "cbc-aes-qce",
- .blocksize = AES_BLOCK_SIZE,
- .ivsize = AES_BLOCK_SIZE,
- .min_keysize = AES_MIN_KEY_SIZE,
- .max_keysize = AES_MAX_KEY_SIZE,
- },
- {
- .flags = QCE_ALG_AES | QCE_MODE_CTR,
- .name = "ctr(aes)",
- .drv_name = "ctr-aes-qce",
- .blocksize = AES_BLOCK_SIZE,
- .ivsize = AES_BLOCK_SIZE,
- .min_keysize = AES_MIN_KEY_SIZE,
- .max_keysize = AES_MAX_KEY_SIZE,
- },
- {
- .flags = QCE_ALG_AES | QCE_MODE_XTS,
- .name = "xts(aes)",
- .drv_name = "xts-aes-qce",
- .blocksize = AES_BLOCK_SIZE,
- .ivsize = AES_BLOCK_SIZE,
- .min_keysize = AES_MIN_KEY_SIZE,
- .max_keysize = AES_MAX_KEY_SIZE,
- },
- {
- .flags = QCE_ALG_DES | QCE_MODE_ECB,
- .name = "ecb(des)",
- .drv_name = "ecb-des-qce",
- .blocksize = DES_BLOCK_SIZE,
- .ivsize = 0,
- .min_keysize = DES_KEY_SIZE,
- .max_keysize = DES_KEY_SIZE,
- },
- {
- .flags = QCE_ALG_DES | QCE_MODE_CBC,
- .name = "cbc(des)",
- .drv_name = "cbc-des-qce",
- .blocksize = DES_BLOCK_SIZE,
- .ivsize = DES_BLOCK_SIZE,
- .min_keysize = DES_KEY_SIZE,
- .max_keysize = DES_KEY_SIZE,
- },
- {
- .flags = QCE_ALG_3DES | QCE_MODE_ECB,
- .name = "ecb(des3_ede)",
- .drv_name = "ecb-3des-qce",
- .blocksize = DES3_EDE_BLOCK_SIZE,
- .ivsize = 0,
- .min_keysize = DES3_EDE_KEY_SIZE,
- .max_keysize = DES3_EDE_KEY_SIZE,
- },
- {
- .flags = QCE_ALG_3DES | QCE_MODE_CBC,
- .name = "cbc(des3_ede)",
- .drv_name = "cbc-3des-qce",
- .blocksize = DES3_EDE_BLOCK_SIZE,
- .ivsize = DES3_EDE_BLOCK_SIZE,
- .min_keysize = DES3_EDE_KEY_SIZE,
- .max_keysize = DES3_EDE_KEY_SIZE,
- },
-};
-
-static int qce_ablkcipher_register_one(const struct qce_ablkcipher_def *def,
- struct qce_device *qce)
-{
- struct qce_alg_template *tmpl;
- struct crypto_alg *alg;
- int ret;
-
- tmpl = kzalloc(sizeof(*tmpl), GFP_KERNEL);
- if (!tmpl)
- return -ENOMEM;
-
- alg = &tmpl->alg.crypto;
-
- snprintf(alg->cra_name, CRYPTO_MAX_ALG_NAME, "%s", def->name);
- snprintf(alg->cra_driver_name, CRYPTO_MAX_ALG_NAME, "%s",
- def->drv_name);
-
- alg->cra_blocksize = def->blocksize;
- alg->cra_ablkcipher.ivsize = def->ivsize;
- alg->cra_ablkcipher.min_keysize = def->min_keysize;
- alg->cra_ablkcipher.max_keysize = def->max_keysize;
- alg->cra_ablkcipher.setkey = qce_ablkcipher_setkey;
- alg->cra_ablkcipher.encrypt = qce_ablkcipher_encrypt;
- alg->cra_ablkcipher.decrypt = qce_ablkcipher_decrypt;
-
- alg->cra_priority = 300;
- alg->cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC |
- CRYPTO_ALG_NEED_FALLBACK | CRYPTO_ALG_KERN_DRIVER_ONLY;
- alg->cra_ctxsize = sizeof(struct qce_cipher_ctx);
- alg->cra_alignmask = 0;
- alg->cra_type = &crypto_ablkcipher_type;
- alg->cra_module = THIS_MODULE;
- alg->cra_init = qce_ablkcipher_init;
- alg->cra_exit = qce_ablkcipher_exit;
- INIT_LIST_HEAD(&alg->cra_list);
-
- INIT_LIST_HEAD(&tmpl->entry);
- tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_ABLKCIPHER;
- tmpl->alg_flags = def->flags;
- tmpl->qce = qce;
-
- ret = crypto_register_alg(alg);
- if (ret) {
- kfree(tmpl);
- dev_err(qce->dev, "%s registration failed\n", alg->cra_name);
- return ret;
- }
-
- list_add_tail(&tmpl->entry, &ablkcipher_algs);
- dev_dbg(qce->dev, "%s is registered\n", alg->cra_name);
- return 0;
-}
-
-static void qce_ablkcipher_unregister(struct qce_device *qce)
-{
- struct qce_alg_template *tmpl, *n;
-
- list_for_each_entry_safe(tmpl, n, &ablkcipher_algs, entry) {
- crypto_unregister_alg(&tmpl->alg.crypto);
- list_del(&tmpl->entry);
- kfree(tmpl);
- }
-}
-
-static int qce_ablkcipher_register(struct qce_device *qce)
-{
- int ret, i;
-
- for (i = 0; i < ARRAY_SIZE(ablkcipher_def); i++) {
- ret = qce_ablkcipher_register_one(&ablkcipher_def[i], qce);
- if (ret)
- goto err;
- }
-
- return 0;
-err:
- qce_ablkcipher_unregister(qce);
- return ret;
-}
-
-const struct qce_algo_ops ablkcipher_ops = {
- .type = CRYPTO_ALG_TYPE_ABLKCIPHER,
- .register_algs = qce_ablkcipher_register,
- .unregister_algs = qce_ablkcipher_unregister,
- .async_req_handle = qce_ablkcipher_async_req_handle,
-};
--- /dev/null
+++ b/drivers/crypto/qce/skcipher.c
@@ -0,0 +1,429 @@
+/*
+ * Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <crypto/aes.h>
+#include <crypto/des.h>
+#include <crypto/internal/skcipher.h>
+
+#include "cipher.h"
+
+static LIST_HEAD(skcipher_algs);
+
+static void qce_skcipher_done(void *data)
+{
+ struct crypto_async_request *async_req = data;
+ struct skcipher_request *req = skcipher_request_cast(async_req);
+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req);
+ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req));
+ struct qce_device *qce = tmpl->qce;
+ enum dma_data_direction dir_src, dir_dst;
+ u32 status;
+ int error;
+ bool diff_dst;
+
+ diff_dst = (req->src != req->dst) ? true : false;
+ dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL;
+ dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL;
+
+ error = qce_dma_terminate_all(&qce->dma);
+ if (error)
+ dev_dbg(qce->dev, "skcipher dma termination error (%d)\n",
+ error);
+
+ if (diff_dst)
+ dma_unmap_sg(qce->dev, rctx->src_sg, rctx->src_nents, dir_src);
+ dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
+
+ sg_free_table(&rctx->dst_tbl);
+
+ error = qce_check_status(qce, &status);
+ if (error < 0)
+ dev_dbg(qce->dev, "skcipher operation error (%x)\n", status);
+
+ qce->async_req_done(tmpl->qce, error);
+}
+
+static int
+qce_skcipher_async_req_handle(struct crypto_async_request *async_req)
+{
+ struct skcipher_request *req = skcipher_request_cast(async_req);
+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req);
+ struct crypto_skcipher *skcipher = crypto_skcipher_reqtfm(req);
+ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req));
+ struct qce_device *qce = tmpl->qce;
+ enum dma_data_direction dir_src, dir_dst;
+ struct scatterlist *sg;
+ bool diff_dst;
+ gfp_t gfp;
+ int ret;
+
+ rctx->iv = req->iv;
+ rctx->ivsize = crypto_skcipher_ivsize(skcipher);
+ rctx->cryptlen = req->cryptlen;
+
+ diff_dst = (req->src != req->dst) ? true : false;
+ dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL;
+ dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL;
+
+ rctx->src_nents = sg_nents_for_len(req->src, req->cryptlen);
+ if (diff_dst)
+ rctx->dst_nents = sg_nents_for_len(req->dst, req->cryptlen);
+ else
+ rctx->dst_nents = rctx->src_nents;
+ if (rctx->src_nents < 0) {
+ dev_err(qce->dev, "Invalid numbers of src SG.\n");
+ return rctx->src_nents;
+ }
+ if (rctx->dst_nents < 0) {
+ dev_err(qce->dev, "Invalid numbers of dst SG.\n");
+ return -rctx->dst_nents;
+ }
+
+ rctx->dst_nents += 1;
+
+ gfp = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ?
+ GFP_KERNEL : GFP_ATOMIC;
+
+ ret = sg_alloc_table(&rctx->dst_tbl, rctx->dst_nents, gfp);
+ if (ret)
+ return ret;
+
+ sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ);
+
+ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst);
+ if (IS_ERR(sg)) {
+ ret = PTR_ERR(sg);
+ goto error_free;
+ }
+
+ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg);
+ if (IS_ERR(sg)) {
+ ret = PTR_ERR(sg);
+ goto error_free;
+ }
+
+ sg_mark_end(sg);
+ rctx->dst_sg = rctx->dst_tbl.sgl;
+
+ ret = dma_map_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
+ if (ret < 0)
+ goto error_free;
+
+ if (diff_dst) {
+ ret = dma_map_sg(qce->dev, req->src, rctx->src_nents, dir_src);
+ if (ret < 0)
+ goto error_unmap_dst;
+ rctx->src_sg = req->src;
+ } else {
+ rctx->src_sg = rctx->dst_sg;
+ }
+
+ ret = qce_dma_prep_sgs(&qce->dma, rctx->src_sg, rctx->src_nents,
+ rctx->dst_sg, rctx->dst_nents,
+ qce_skcipher_done, async_req);
+ if (ret)
+ goto error_unmap_src;
+
+ qce_dma_issue_pending(&qce->dma);
+
+ ret = qce_start(async_req, tmpl->crypto_alg_type, req->cryptlen, 0);
+ if (ret)
+ goto error_terminate;
+
+ return 0;
+
+error_terminate:
+ qce_dma_terminate_all(&qce->dma);
+error_unmap_src:
+ if (diff_dst)
+ dma_unmap_sg(qce->dev, req->src, rctx->src_nents, dir_src);
+error_unmap_dst:
+ dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
+error_free:
+ sg_free_table(&rctx->dst_tbl);
+ return ret;
+}
+
+static int qce_skcipher_setkey(struct crypto_skcipher *ablk, const u8 *key,
+ unsigned int keylen)
+{
+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(ablk);
+ unsigned long flags = to_cipher_tmpl(ablk)->alg_flags;
+ int ret;
+
+ if (!key || !keylen)
+ return -EINVAL;
+
+ if (IS_AES(flags)) {
+ switch (keylen) {
+ case AES_KEYSIZE_128:
+ case AES_KEYSIZE_256:
+ break;
+ default:
+ goto fallback;
+ }
+ } else if (IS_DES(flags)) {
+ u32 tmp[DES_EXPKEY_WORDS];
+
+ ret = des_ekey(tmp, key);
+ if (!ret && crypto_skcipher_get_flags(ablk) &
+ CRYPTO_TFM_REQ_WEAK_KEY)
+ goto weakkey;
+ }
+
+ ctx->enc_keylen = keylen;
+ memcpy(ctx->enc_key, key, keylen);
+ return 0;
+fallback:
+ ret = crypto_skcipher_setkey(ctx->fallback, key, keylen);
+ if (!ret)
+ ctx->enc_keylen = keylen;
+ return ret;
+weakkey:
+ crypto_skcipher_set_flags(ablk, CRYPTO_TFM_RES_WEAK_KEY);
+ return -EINVAL;
+}
+
+static int qce_skcipher_crypt(struct skcipher_request *req, int encrypt)
+{
+ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req);
+ struct qce_alg_template *tmpl = to_cipher_tmpl(tfm);
+ int ret;
+
+ rctx->flags = tmpl->alg_flags;
+ rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT;
+
+ if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 &&
+ ctx->enc_keylen != AES_KEYSIZE_256) {
+ SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback);
+
+ skcipher_request_set_tfm(subreq, ctx->fallback);
+ skcipher_request_set_callback(subreq, req->base.flags,
+ NULL, NULL);
+ skcipher_request_set_crypt(subreq, req->src, req->dst,
+ req->cryptlen, req->iv);
+ ret = encrypt ? crypto_skcipher_encrypt(subreq) :
+ crypto_skcipher_decrypt(subreq);
+ skcipher_request_zero(subreq);
+ return ret;
+ }
+
+ return tmpl->qce->async_req_enqueue(tmpl->qce, &req->base);
+}
+
+static int qce_skcipher_encrypt(struct skcipher_request *req)
+{
+ return qce_skcipher_crypt(req, 1);
+}
+
+static int qce_skcipher_decrypt(struct skcipher_request *req)
+{
+ return qce_skcipher_crypt(req, 0);
+}
+
+static int qce_skcipher_init(struct crypto_skcipher *tfm)
+{
+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
+
+ memset(ctx, 0, sizeof(*ctx));
+ crypto_skcipher_set_reqsize(tfm, sizeof(struct qce_cipher_reqctx));
+
+ ctx->fallback = crypto_alloc_skcipher(crypto_tfm_alg_name(&tfm->base),
+ 0, CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_NEED_FALLBACK);
+ return PTR_ERR_OR_ZERO(ctx->fallback);
+}
+
+static void qce_skcipher_exit(struct crypto_skcipher *tfm)
+{
+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
+
+ crypto_free_skcipher(ctx->fallback);
+}
+
+struct qce_skcipher_def {
+ unsigned long flags;
+ const char *name;
+ const char *drv_name;
+ unsigned int blocksize;
+ unsigned int ivsize;
+ unsigned int min_keysize;
+ unsigned int max_keysize;
+};
+
+static const struct qce_skcipher_def skcipher_def[] = {
+ {
+ .flags = QCE_ALG_AES | QCE_MODE_ECB,
+ .name = "ecb(aes)",
+ .drv_name = "ecb-aes-qce",
+ .blocksize = AES_BLOCK_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ },
+ {
+ .flags = QCE_ALG_AES | QCE_MODE_CBC,
+ .name = "cbc(aes)",
+ .drv_name = "cbc-aes-qce",
+ .blocksize = AES_BLOCK_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ },
+ {
+ .flags = QCE_ALG_AES | QCE_MODE_CTR,
+ .name = "ctr(aes)",
+ .drv_name = "ctr-aes-qce",
+ .blocksize = AES_BLOCK_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ },
+ {
+ .flags = QCE_ALG_AES | QCE_MODE_XTS,
+ .name = "xts(aes)",
+ .drv_name = "xts-aes-qce",
+ .blocksize = AES_BLOCK_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ },
+ {
+ .flags = QCE_ALG_DES | QCE_MODE_ECB,
+ .name = "ecb(des)",
+ .drv_name = "ecb-des-qce",
+ .blocksize = DES_BLOCK_SIZE,
+ .ivsize = 0,
+ .min_keysize = DES_KEY_SIZE,
+ .max_keysize = DES_KEY_SIZE,
+ },
+ {
+ .flags = QCE_ALG_DES | QCE_MODE_CBC,
+ .name = "cbc(des)",
+ .drv_name = "cbc-des-qce",
+ .blocksize = DES_BLOCK_SIZE,
+ .ivsize = DES_BLOCK_SIZE,
+ .min_keysize = DES_KEY_SIZE,
+ .max_keysize = DES_KEY_SIZE,
+ },
+ {
+ .flags = QCE_ALG_3DES | QCE_MODE_ECB,
+ .name = "ecb(des3_ede)",
+ .drv_name = "ecb-3des-qce",
+ .blocksize = DES3_EDE_BLOCK_SIZE,
+ .ivsize = 0,
+ .min_keysize = DES3_EDE_KEY_SIZE,
+ .max_keysize = DES3_EDE_KEY_SIZE,
+ },
+ {
+ .flags = QCE_ALG_3DES | QCE_MODE_CBC,
+ .name = "cbc(des3_ede)",
+ .drv_name = "cbc-3des-qce",
+ .blocksize = DES3_EDE_BLOCK_SIZE,
+ .ivsize = DES3_EDE_BLOCK_SIZE,
+ .min_keysize = DES3_EDE_KEY_SIZE,
+ .max_keysize = DES3_EDE_KEY_SIZE,
+ },
+};
+
+static int qce_skcipher_register_one(const struct qce_skcipher_def *def,
+ struct qce_device *qce)
+{
+ struct qce_alg_template *tmpl;
+ struct skcipher_alg *alg;
+ int ret;
+
+ tmpl = kzalloc(sizeof(*tmpl), GFP_KERNEL);
+ if (!tmpl)
+ return -ENOMEM;
+
+ alg = &tmpl->alg.skcipher;
+
+ snprintf(alg->base.cra_name, CRYPTO_MAX_ALG_NAME, "%s", def->name);
+ snprintf(alg->base.cra_driver_name, CRYPTO_MAX_ALG_NAME, "%s",
+ def->drv_name);
+
+ alg->base.cra_blocksize = def->blocksize;
+ alg->ivsize = def->ivsize;
+ alg->min_keysize = def->min_keysize;
+ alg->max_keysize = def->max_keysize;
+ alg->setkey = qce_skcipher_setkey;
+ alg->encrypt = qce_skcipher_encrypt;
+ alg->decrypt = qce_skcipher_decrypt;
+
+ alg->base.cra_priority = 300;
+ alg->base.cra_flags = CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_NEED_FALLBACK |
+ CRYPTO_ALG_KERN_DRIVER_ONLY;
+ alg->base.cra_ctxsize = sizeof(struct qce_cipher_ctx);
+ alg->base.cra_alignmask = 0;
+ alg->base.cra_module = THIS_MODULE;
+
+ alg->init = qce_skcipher_init;
+ alg->exit = qce_skcipher_exit;
+
+ INIT_LIST_HEAD(&tmpl->entry);
+ tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_SKCIPHER;
+ tmpl->alg_flags = def->flags;
+ tmpl->qce = qce;
+
+ ret = crypto_register_skcipher(alg);
+ if (ret) {
+ kfree(tmpl);
+ dev_err(qce->dev, "%s registration failed\n", alg->base.cra_name);
+ return ret;
+ }
+
+ list_add_tail(&tmpl->entry, &skcipher_algs);
+ dev_dbg(qce->dev, "%s is registered\n", alg->base.cra_name);
+ return 0;
+}
+
+static void qce_skcipher_unregister(struct qce_device *qce)
+{
+ struct qce_alg_template *tmpl, *n;
+
+ list_for_each_entry_safe(tmpl, n, &skcipher_algs, entry) {
+ crypto_unregister_skcipher(&tmpl->alg.skcipher);
+ list_del(&tmpl->entry);
+ kfree(tmpl);
+ }
+}
+
+static int qce_skcipher_register(struct qce_device *qce)
+{
+ int ret, i;
+
+ for (i = 0; i < ARRAY_SIZE(skcipher_def); i++) {
+ ret = qce_skcipher_register_one(&skcipher_def[i], qce);
+ if (ret)
+ goto err;
+ }
+
+ return 0;
+err:
+ qce_skcipher_unregister(qce);
+ return ret;
+}
+
+const struct qce_algo_ops skcipher_ops = {
+ .type = CRYPTO_ALG_TYPE_SKCIPHER,
+ .register_algs = qce_skcipher_register,
+ .unregister_algs = qce_skcipher_unregister,
+ .async_req_handle = qce_skcipher_async_req_handle,
+};

39
target/linux/ipq40xx/patches-4.19/041-crypto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch
View File

@ -1,39 +0,0 @@
From 3f5598286445f695bb63a22239dd3603c69a6eaf Mon Sep 17 00:00:00 2001
From: Eneas U de Queiroz <cotequeiroz@gmail.com>
Date: Mon, 28 Oct 2019 09:03:07 -0300
Subject: [PATCH] crypto: qce - fix ctr-aes-qce block, chunk sizes
Set blocksize of ctr-aes-qce to 1, so it can operate as a stream cipher,
adding the definition for chucksize instead, where the underlying block
size belongs.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
--- a/drivers/crypto/qce/skcipher.c
+++ b/drivers/crypto/qce/skcipher.c
@@ -261,6 +261,7 @@ struct qce_skcipher_def {
const char *name;
const char *drv_name;
unsigned int blocksize;
+ unsigned int chunksize;
unsigned int ivsize;
unsigned int min_keysize;
unsigned int max_keysize;
@@ -289,7 +290,8 @@ static const struct qce_skcipher_def skc
.flags = QCE_ALG_AES | QCE_MODE_CTR,
.name = "ctr(aes)",
.drv_name = "ctr-aes-qce",
- .blocksize = AES_BLOCK_SIZE,
+ .blocksize = 1,
+ .chunksize = AES_BLOCK_SIZE,
.ivsize = AES_BLOCK_SIZE,
.min_keysize = AES_MIN_KEY_SIZE,
.max_keysize = AES_MAX_KEY_SIZE,
@@ -359,6 +361,7 @@ static int qce_skcipher_register_one(con
def->drv_name);
alg->base.cra_blocksize = def->blocksize;
+ alg->chunksize = def->chunksize;
alg->ivsize = def->ivsize;
alg->min_keysize = def->min_keysize;
alg->max_keysize = def->max_keysize;

50
target/linux/ipq40xx/patches-4.19/042-crypto-qce-fix-xts-aes-qce-key-sizes.patch
View File

@ -1,50 +0,0 @@
From 0138c3c13809250338d7cfba6f4ca3b2da02b2c8 Mon Sep 17 00:00:00 2001
From: Eneas U de Queiroz <cotequeiroz@gmail.com>
Date: Thu, 21 Nov 2019 14:28:23 -0300
Subject: [PATCH] crypto: qce - fix xts-aes-qce key sizes
XTS-mode uses two keys, so the keysizes should be doubled in
skcipher_def, and halved when checking if it is AES-128/192/256.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
--- a/drivers/crypto/qce/skcipher.c
+++ b/drivers/crypto/qce/skcipher.c
@@ -168,7 +168,7 @@ static int qce_skcipher_setkey(struct cr
return -EINVAL;
if (IS_AES(flags)) {
- switch (keylen) {
+ switch (IS_XTS(flags) ? keylen >> 1 : keylen) {
case AES_KEYSIZE_128:
case AES_KEYSIZE_256:
break;
@@ -203,13 +203,15 @@ static int qce_skcipher_crypt(struct skc
struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req);
struct qce_alg_template *tmpl = to_cipher_tmpl(tfm);
+ int keylen;
int ret;
rctx->flags = tmpl->alg_flags;
rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT;
+ keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen;
- if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 &&
- ctx->enc_keylen != AES_KEYSIZE_256) {
+ if (IS_AES(rctx->flags) && keylen != AES_KEYSIZE_128 &&
+ keylen != AES_KEYSIZE_256) {
SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback);
skcipher_request_set_tfm(subreq, ctx->fallback);
@@ -302,8 +304,8 @@ static const struct qce_skcipher_def skc
.drv_name = "xts-aes-qce",
.blocksize = AES_BLOCK_SIZE,
.ivsize = AES_BLOCK_SIZE,
- .min_keysize = AES_MIN_KEY_SIZE,
- .max_keysize = AES_MAX_KEY_SIZE,
+ .min_keysize = AES_MIN_KEY_SIZE * 2,
+ .max_keysize = AES_MAX_KEY_SIZE * 2,
},
{
.flags = QCE_ALG_DES | QCE_MODE_ECB,

79
target/linux/ipq40xx/patches-4.19/043-crypto-qce-save-a-sg-table-slot-for-result-buf.patch
View File

@ -1,79 +0,0 @@
From 31f796293b6c38126a466414c565827b9cfdbe39 Mon Sep 17 00:00:00 2001
From: Eneas U de Queiroz <cotequeiroz@gmail.com>
Date: Wed, 20 Nov 2019 21:39:11 -0300
Subject: [PATCH] crypto: qce - save a sg table slot for result buf
When ctr-aes-qce is used for gcm-mode, an extra sg entry for the
authentication tag is present, causing trouble when the qce driver
prepares the dst-results eg table for dma.
It computes the number of entries needed with sg_nents_for_len, leaving
out the tag entry. Then it creates a sg table with that number plus
one, used to store a "result" sg.
When copying the sg table, it does not limit the number of entries
copied, so tha extra slot is filled with the authentication tag sg.
When the driver tries to add the result sg, the list is full, and it
returns EINVAL.
By limiting the number of sg entries copied to the dest table, the slot
for the result buffer is guaranteed to be unused.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
--- a/drivers/crypto/qce/dma.c
+++ b/drivers/crypto/qce/dma.c
@@ -55,7 +55,8 @@ void qce_dma_release(struct qce_dma_data
}
struct scatterlist *
-qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl)
+qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl,
+ int max_ents)
{
struct scatterlist *sg = sgt->sgl, *sg_last = NULL;
@@ -68,12 +69,13 @@ qce_sgtable_add(struct sg_table *sgt, st
if (!sg)
return ERR_PTR(-EINVAL);
- while (new_sgl && sg) {
+ while (new_sgl && sg && max_ents) {
sg_set_page(sg, sg_page(new_sgl), new_sgl->length,
new_sgl->offset);
sg_last = sg;
sg = sg_next(sg);
new_sgl = sg_next(new_sgl);
+ max_ents--;
}
return sg_last;
--- a/drivers/crypto/qce/dma.h
+++ b/drivers/crypto/qce/dma.h
@@ -50,6 +50,7 @@ int qce_dma_prep_sgs(struct qce_dma_data
void qce_dma_issue_pending(struct qce_dma_data *dma);
int qce_dma_terminate_all(struct qce_dma_data *dma);
struct scatterlist *
-qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add);
+qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add,
+ int max_ents);
#endif /* _DMA_H_ */
--- a/drivers/crypto/qce/skcipher.c
+++ b/drivers/crypto/qce/skcipher.c
@@ -103,13 +103,13 @@ qce_skcipher_async_req_handle(struct cry
sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ);
- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst);
+ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, rctx->dst_nents - 1);
if (IS_ERR(sg)) {
ret = PTR_ERR(sg);
goto error_free;
}
- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg);
+ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg, 1);
if (IS_ERR(sg)) {
ret = PTR_ERR(sg);
goto error_free;

27
target/linux/ipq40xx/patches-4.19/044-crypto-qce-update-the-skcipher-IV.patch
View File

@ -1,27 +0,0 @@
From 502ca0b7c1d856a46dbd78e67690c12c47775b97 Mon Sep 17 00:00:00 2001
From: Eneas U de Queiroz <cotequeiroz@gmail.com>
Date: Fri, 22 Nov 2019 09:00:02 -0300
Subject: [PATCH] crypto: qce - update the skcipher IV
Update the IV after the completion of each cipher operation.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
--- a/drivers/crypto/qce/skcipher.c
+++ b/drivers/crypto/qce/skcipher.c
@@ -29,6 +29,7 @@ static void qce_skcipher_done(void *data
struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req);
struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req));
struct qce_device *qce = tmpl->qce;
+ struct qce_result_dump *result_buf = qce->dma.result_buf;
enum dma_data_direction dir_src, dir_dst;
u32 status;
int error;
@@ -53,6 +54,7 @@ static void qce_skcipher_done(void *data
if (error < 0)
dev_dbg(qce->dev, "skcipher operation error (%x)\n", status);
+ memcpy(rctx->iv, result_buf->encr_cntr_iv, rctx->ivsize);
qce->async_req_done(tmpl->qce, error);
}

54
target/linux/ipq40xx/patches-4.19/046-crypto-qce-initialize-fallback-only-for-AES.patch
View File

@ -1,54 +0,0 @@
From f2a33ce18232919d3831d1c61a06b6067209282d Mon Sep 17 00:00:00 2001
From: Eneas U de Queiroz <cotequeiroz@gmail.com>
Date: Fri, 22 Nov 2019 09:34:29 -0300
Subject: [PATCH] crypto: qce - initialize fallback only for AES
Adjust cra_flags to add CRYPTO_NEED_FALLBACK only for AES ciphers, where
AES-192 is not handled by the qce hardware, and don't allocate & free
the fallback skcipher for anything other than AES.
The rest of the code is unchanged, as the use of the fallback is already
restricted to AES.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
--- a/drivers/crypto/qce/skcipher.c
+++ b/drivers/crypto/qce/skcipher.c
@@ -246,7 +246,15 @@ static int qce_skcipher_init(struct cryp
memset(ctx, 0, sizeof(*ctx));
crypto_skcipher_set_reqsize(tfm, sizeof(struct qce_cipher_reqctx));
+ return 0;
+}
+
+static int qce_skcipher_init_fallback(struct crypto_skcipher *tfm)
+{
+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
+ int ret;
+ qce_skcipher_init(tfm);
ctx->fallback = crypto_alloc_skcipher(crypto_tfm_alg_name(&tfm->base),
0, CRYPTO_ALG_ASYNC |
CRYPTO_ALG_NEED_FALLBACK);
@@ -375,14 +383,18 @@ static int qce_skcipher_register_one(con
alg->base.cra_priority = 300;
alg->base.cra_flags = CRYPTO_ALG_ASYNC |
- CRYPTO_ALG_NEED_FALLBACK |
CRYPTO_ALG_KERN_DRIVER_ONLY;
alg->base.cra_ctxsize = sizeof(struct qce_cipher_ctx);
alg->base.cra_alignmask = 0;
alg->base.cra_module = THIS_MODULE;
- alg->init = qce_skcipher_init;
- alg->exit = qce_skcipher_exit;
+ if (IS_AES(def->flags)) {
+ alg->base.cra_flags |= CRYPTO_ALG_NEED_FALLBACK;
+ alg->init = qce_skcipher_init_fallback;
+ alg->exit = qce_skcipher_exit;
+ } else {
+ alg->init = qce_skcipher_init;
+ }
INIT_LIST_HEAD(&tmpl->entry);
tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_SKCIPHER;

83
target/linux/ipq40xx/patches-4.19/047-crypto-qce-use-cryptlen-when-adding-extra-sgl.patch
View File

@ -1,83 +0,0 @@
From 686aa4db696270dadc5e8b2971769e1676251ff1 Mon Sep 17 00:00:00 2001
From: Eneas U de Queiroz <cotequeiroz@gmail.com>
Date: Fri, 31 Jan 2020 17:43:16 -0300
Subject: [PATCH] crypto: qce - use cryptlen when adding extra sgl
The qce crypto driver appends an extra entry to the dst sgl, to maintain
private state information.
When the gcm driver sends requests to the ctr skcipher, it passes the
authentication tag after the actual crypto payload, but it must not be
touched.
Commit 1336c2221bee ("crypto: qce - save a sg table slot for result
buf") limited the destination sgl to avoid overwriting the
authentication tag but it assumed the tag would be in a separate sgl
entry.
This is not always the case, so it is better to limit the length of the
destination buffer to req->cryptlen before appending the result buf.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
--- a/drivers/crypto/qce/dma.c
+++ b/drivers/crypto/qce/dma.c
@@ -56,9 +56,10 @@ void qce_dma_release(struct qce_dma_data
struct scatterlist *
qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl,
- int max_ents)
+ unsigned int max_len)
{
struct scatterlist *sg = sgt->sgl, *sg_last = NULL;
+ unsigned int new_len;
while (sg) {
if (!sg_page(sg))
@@ -69,13 +70,13 @@ qce_sgtable_add(struct sg_table *sgt, st
if (!sg)
return ERR_PTR(-EINVAL);
- while (new_sgl && sg && max_ents) {
- sg_set_page(sg, sg_page(new_sgl), new_sgl->length,
- new_sgl->offset);
+ while (new_sgl && sg && max_len) {
+ new_len = new_sgl->length > max_len ? max_len : new_sgl->length;
+ sg_set_page(sg, sg_page(new_sgl), new_len, new_sgl->offset);
sg_last = sg;
sg = sg_next(sg);
new_sgl = sg_next(new_sgl);
- max_ents--;
+ max_len -= new_len;
}
return sg_last;
--- a/drivers/crypto/qce/dma.h
+++ b/drivers/crypto/qce/dma.h
@@ -51,6 +51,6 @@ void qce_dma_issue_pending(struct qce_dm
int qce_dma_terminate_all(struct qce_dma_data *dma);
struct scatterlist *
qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add,
- int max_ents);
+ unsigned int max_len);
#endif /* _DMA_H_ */
--- a/drivers/crypto/qce/skcipher.c
+++ b/drivers/crypto/qce/skcipher.c
@@ -105,13 +105,14 @@ qce_skcipher_async_req_handle(struct cry
sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ);
- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, rctx->dst_nents - 1);
+ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, req->cryptlen);
if (IS_ERR(sg)) {
ret = PTR_ERR(sg);
goto error_free;
}
- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg, 1);
+ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg,
+ QCE_RESULT_BUF_SZ);
if (IS_ERR(sg)) {
ret = PTR_ERR(sg);
goto error_free;

122
target/linux/ipq40xx/patches-4.19/048-crypto-qce-use-AES-fallback-for-small-requests.patch
View File

@ -1,122 +0,0 @@
From 2d3b6fae7d1a2ad821769440daa91d7eec5c8250 Mon Sep 17 00:00:00 2001
From: Eneas U de Queiroz <cotequeiroz@gmail.com>
Date: Fri, 20 Dec 2019 09:41:44 -0300
Subject: [PATCH] crypto: qce - use AES fallback for small requests
Process small blocks using the fallback cipher, as a workaround for an
observed failure (DMA-related, apparently) when computing the GCM ghash
key. This brings a speed gain as well, since it avoids the latency of
using the hardware engine to process small blocks.
Using software for all 16-byte requests would be enough to make GCM
work, but to increase performance, a larger threshold would be better.
Measuring the performance of supported ciphers with openssl speed,
software matches hardware at around 768-1024 bytes.
Considering the 256-bit ciphers, software is 2-3 times faster than qce
at 256-bytes, 30% faster at 512, and about even at 768-bytes. With
128-bit keys, the break-even point would be around 1024-bytes.
This adds the 'aes_sw_max_len' parameter, to set the largest request
length processed by the software fallback. Its default is being set to
512 bytes, a little lower than the break-even point, to balance the cost
in CPU usage.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -585,6 +585,29 @@ config CRYPTO_DEV_QCE
hardware. To compile this driver as a module, choose M here. The
module will be called qcrypto.
+config CRYPTO_DEV_QCE_SW_MAX_LEN
+ int "Default maximum request size to use software for AES"
+ depends on CRYPTO_DEV_QCE && CRYPTO_DEV_QCE_SKCIPHER
+ default 512
+ help
+ This sets the default maximum request size to perform AES requests
+ using software instead of the crypto engine. It can be changed by
+ setting the aes_sw_max_len parameter.
+
+ Small blocks are processed faster in software than hardware.
+ Considering the 256-bit ciphers, software is 2-3 times faster than
+ qce at 256-bytes, 30% faster at 512, and about even at 768-bytes.
+ With 128-bit keys, the break-even point would be around 1024-bytes.
+
+ The default is set a little lower, to 512 bytes, to balance the
+ cost in CPU usage. The minimum recommended setting is 16-bytes
+ (1 AES block), since AES-GCM will fail if you set it lower.
+ Setting this to zero will send all requests to the hardware.
+
+ Note that 192-bit keys are not supported by the hardware and are
+ always processed by the software fallback, and all DES requests
+ are done by the hardware.
+
config CRYPTO_DEV_QCOM_RNG
tristate "Qualcomm Random Number Generator Driver"
depends on ARCH_QCOM || COMPILE_TEST
--- a/drivers/crypto/qce/skcipher.c
+++ b/drivers/crypto/qce/skcipher.c
@@ -13,6 +13,7 @@
#include <linux/device.h>
#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
#include <linux/types.h>
#include <crypto/aes.h>
#include <crypto/des.h>
@@ -20,6 +21,13 @@
#include "cipher.h"
+static unsigned int aes_sw_max_len = CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN;
+module_param(aes_sw_max_len, uint, 0644);
+MODULE_PARM_DESC(aes_sw_max_len,
+ "Only use hardware for AES requests larger than this "
+ "[0=always use hardware; anything <16 breaks AES-GCM; default="
+ __stringify(CONFIG_CRYPTO_DEV_QCE_SOFT_THRESHOLD)"]");
+
static LIST_HEAD(skcipher_algs);
static void qce_skcipher_done(void *data)
@@ -170,15 +178,7 @@ static int qce_skcipher_setkey(struct cr
if (!key || !keylen)
return -EINVAL;
- if (IS_AES(flags)) {
- switch (IS_XTS(flags) ? keylen >> 1 : keylen) {
- case AES_KEYSIZE_128:
- case AES_KEYSIZE_256:
- break;
- default:
- goto fallback;
- }
- } else if (IS_DES(flags)) {
+ if (IS_DES(flags)) {
u32 tmp[DES_EXPKEY_WORDS];
ret = des_ekey(tmp, key);
@@ -189,8 +189,8 @@ static int qce_skcipher_setkey(struct cr
ctx->enc_keylen = keylen;
memcpy(ctx->enc_key, key, keylen);
- return 0;
-fallback:
+ if (!IS_AES(flags))
+ return 0;
ret = crypto_skcipher_setkey(ctx->fallback, key, keylen);
if (!ret)
ctx->enc_keylen = keylen;
@@ -213,8 +213,9 @@ static int qce_skcipher_crypt(struct skc
rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT;
keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen;
- if (IS_AES(rctx->flags) && keylen != AES_KEYSIZE_128 &&
- keylen != AES_KEYSIZE_256) {
+ if (IS_AES(rctx->flags) &&
+ ((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) ||
+ req->cryptlen <= aes_sw_max_len)) {
SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback);
skcipher_request_set_tfm(subreq, ctx->fallback);

53
target/linux/ipq40xx/patches-4.19/049-crypto-qce-handle-AES-XTS-cases-that-qce-fails.patch
View File

@ -1,53 +0,0 @@
From bbf2b1cf22dc98f3df33b6666df046dfb9564d91 Mon Sep 17 00:00:00 2001
From: Eneas U de Queiroz <cotequeiroz@gmail.com>
Date: Wed, 5 Feb 2020 13:42:25 -0300
Subject: [PATCH] crypto: qce - handle AES-XTS cases that qce fails
QCE hangs when presented with an AES-XTS request whose length is larger
than QCE_SECTOR_SIZE (512-bytes), and is not a multiple of it. Let the
fallback cipher handle them.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
--- a/drivers/crypto/qce/common.c
+++ b/drivers/crypto/qce/common.c
@@ -23,8 +23,6 @@
#include "regs-v5.h"
#include "sha.h"
-#define QCE_SECTOR_SIZE 512
-
static inline u32 qce_read(struct qce_device *qce, u32 offset)
{
return readl(qce->base + offset);
--- a/drivers/crypto/qce/common.h
+++ b/drivers/crypto/qce/common.h
@@ -20,6 +20,9 @@
#include <crypto/hash.h>
#include <crypto/internal/skcipher.h>
+/* xts du size */
+#define QCE_SECTOR_SIZE 512
+
/* key size in bytes */
#define QCE_SHA_HMAC_KEY_SIZE 64
#define QCE_MAX_CIPHER_KEY_SIZE AES_KEYSIZE_256
--- a/drivers/crypto/qce/skcipher.c
+++ b/drivers/crypto/qce/skcipher.c
@@ -213,9 +213,14 @@ static int qce_skcipher_crypt(struct skc
rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT;
keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen;
+ /* qce is hanging when AES-XTS request len > QCE_SECTOR_SIZE and
+ * is not a multiple of it; pass such requests to the fallback
+ */
if (IS_AES(rctx->flags) &&
- ((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) ||
- req->cryptlen <= aes_sw_max_len)) {
+ (((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) ||
+ req->cryptlen <= aes_sw_max_len) ||
+ (IS_XTS(rctx->flags) && req->cryptlen > QCE_SECTOR_SIZE &&
+ req->cryptlen % QCE_SECTOR_SIZE))) {
SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback);
skcipher_request_set_tfm(subreq, ctx->fallback);

406
target/linux/ipq40xx/patches-4.19/051-crypto-qce-allow-building-only-hashes-ciphers.patch
View File

@ -1,406 +0,0 @@
From 62134842498927a0fcc19798a615340a7a6a9e62 Mon Sep 17 00:00:00 2001
From: Eneas U de Queiroz <cotequeiroz@gmail.com>
Date: Mon, 28 Oct 2019 15:17:19 -0300
Subject: [PATCH] crypto: qce - allow building only hashes/ciphers
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -573,6 +573,14 @@ config CRYPTO_DEV_QCE
tristate "Qualcomm crypto engine accelerator"
depends on ARCH_QCOM || COMPILE_TEST
depends on HAS_IOMEM
+ help
+ This driver supports Qualcomm crypto engine accelerator
+ hardware. To compile this driver as a module, choose M here. The
+ module will be called qcrypto.
+
+config CRYPTO_DEV_QCE_SKCIPHER
+ bool
+ depends on CRYPTO_DEV_QCE
select CRYPTO_AES
select CRYPTO_DES
select CRYPTO_ECB
@@ -580,10 +588,57 @@ config CRYPTO_DEV_QCE
select CRYPTO_XTS
select CRYPTO_CTR
select CRYPTO_BLKCIPHER
+
+config CRYPTO_DEV_QCE_SHA
+ bool
+ depends on CRYPTO_DEV_QCE
+
+choice
+ prompt "Algorithms enabled for QCE acceleration"
+ default CRYPTO_DEV_QCE_ENABLE_ALL
+ depends on CRYPTO_DEV_QCE
help
- This driver supports Qualcomm crypto engine accelerator
- hardware. To compile this driver as a module, choose M here. The
- module will be called qcrypto.
+ This option allows to choose whether to build support for all algorihtms
+ (default), hashes-only, or skciphers-only.
+
+ The QCE engine does not appear to scale as well as the CPU to handle
+ multiple crypto requests. While the ipq40xx chips have 4-core CPUs, the
+ QCE handles only 2 requests in parallel.
+
+ Ipsec throughput seems to improve when disabling either family of
+ algorithms, sharing the load with the CPU. Enabling skciphers-only
+ appears to work best.
+
+ config CRYPTO_DEV_QCE_ENABLE_ALL
+ bool "All supported algorithms"
+ select CRYPTO_DEV_QCE_SKCIPHER
+ select CRYPTO_DEV_QCE_SHA
+ help
+ Enable all supported algorithms:
+ - AES (CBC, CTR, ECB, XTS)
+ - 3DES (CBC, ECB)
+ - DES (CBC, ECB)
+ - SHA1, HMAC-SHA1
+ - SHA256, HMAC-SHA256
+
+ config CRYPTO_DEV_QCE_ENABLE_SKCIPHER
+ bool "Symmetric-key ciphers only"
+ select CRYPTO_DEV_QCE_SKCIPHER
+ help
+ Enable symmetric-key ciphers only:
+ - AES (CBC, CTR, ECB, XTS)
+ - 3DES (ECB, CBC)
+ - DES (ECB, CBC)
+
+ config CRYPTO_DEV_QCE_ENABLE_SHA
+ bool "Hash/HMAC only"
+ select CRYPTO_DEV_QCE_SHA
+ help
+ Enable hashes/HMAC algorithms only:
+ - SHA1, HMAC-SHA1
+ - SHA256, HMAC-SHA256
+
+endchoice
config CRYPTO_DEV_QCE_SW_MAX_LEN
int "Default maximum request size to use software for AES"
--- a/drivers/crypto/qce/Makefile
+++ b/drivers/crypto/qce/Makefile
@@ -2,6 +2,7 @@
obj-$(CONFIG_CRYPTO_DEV_QCE) += qcrypto.o
qcrypto-objs := core.o \
common.o \
- dma.o \
- sha.o \
- skcipher.o
+ dma.o
+
+qcrypto-$(CONFIG_CRYPTO_DEV_QCE_SHA) += sha.o
+qcrypto-$(CONFIG_CRYPTO_DEV_QCE_SKCIPHER) += skcipher.o
--- a/drivers/crypto/qce/common.c
+++ b/drivers/crypto/qce/common.c
@@ -51,52 +51,56 @@ qce_clear_array(struct qce_device *qce,
qce_write(qce, offset + i * sizeof(u32), 0);
}
-static u32 qce_encr_cfg(unsigned long flags, u32 aes_key_size)
+static u32 qce_config_reg(struct qce_device *qce, int little)
{
- u32 cfg = 0;
+ u32 beats = (qce->burst_size >> 3) - 1;
+ u32 pipe_pair = qce->pipe_pair_id;
+ u32 config;
- if (IS_AES(flags)) {
- if (aes_key_size == AES_KEYSIZE_128)
- cfg |= ENCR_KEY_SZ_AES128 << ENCR_KEY_SZ_SHIFT;
- else if (aes_key_size == AES_KEYSIZE_256)
- cfg |= ENCR_KEY_SZ_AES256 << ENCR_KEY_SZ_SHIFT;
- }
+ config = (beats << REQ_SIZE_SHIFT) & REQ_SIZE_MASK;
+ config |= BIT(MASK_DOUT_INTR_SHIFT) | BIT(MASK_DIN_INTR_SHIFT) |
+ BIT(MASK_OP_DONE_INTR_SHIFT) | BIT(MASK_ERR_INTR_SHIFT);
+ config |= (pipe_pair << PIPE_SET_SELECT_SHIFT) & PIPE_SET_SELECT_MASK;
+ config &= ~HIGH_SPD_EN_N_SHIFT;
- if (IS_AES(flags))
- cfg |= ENCR_ALG_AES << ENCR_ALG_SHIFT;
- else if (IS_DES(flags) || IS_3DES(flags))
- cfg |= ENCR_ALG_DES << ENCR_ALG_SHIFT;
+ if (little)
+ config |= BIT(LITTLE_ENDIAN_MODE_SHIFT);
- if (IS_DES(flags))
- cfg |= ENCR_KEY_SZ_DES << ENCR_KEY_SZ_SHIFT;
+ return config;
+}
- if (IS_3DES(flags))
- cfg |= ENCR_KEY_SZ_3DES << ENCR_KEY_SZ_SHIFT;
+void qce_cpu_to_be32p_array(__be32 *dst, const u8 *src, unsigned int len)
+{
+ __be32 *d = dst;
+ const u8 *s = src;
+ unsigned int n;
- switch (flags & QCE_MODE_MASK) {
- case QCE_MODE_ECB:
- cfg |= ENCR_MODE_ECB << ENCR_MODE_SHIFT;
- break;
- case QCE_MODE_CBC:
- cfg |= ENCR_MODE_CBC << ENCR_MODE_SHIFT;
- break;
- case QCE_MODE_CTR:
- cfg |= ENCR_MODE_CTR << ENCR_MODE_SHIFT;
- break;
- case QCE_MODE_XTS:
- cfg |= ENCR_MODE_XTS << ENCR_MODE_SHIFT;
- break;
- case QCE_MODE_CCM:
- cfg |= ENCR_MODE_CCM << ENCR_MODE_SHIFT;
- cfg |= LAST_CCM_XFR << LAST_CCM_SHIFT;
- break;
- default:
- return ~0;
+ n = len / sizeof(u32);
+ for (; n > 0; n--) {
+ *d = cpu_to_be32p((const __u32 *) s);
+ s += sizeof(__u32);
+ d++;
}
+}
- return cfg;
+static void qce_setup_config(struct qce_device *qce)
+{
+ u32 config;
+
+ /* get big endianness */
+ config = qce_config_reg(qce, 0);
+
+ /* clear status */
+ qce_write(qce, REG_STATUS, 0);
+ qce_write(qce, REG_CONFIG, config);
+}
+
+static inline void qce_crypto_go(struct qce_device *qce)
+{
+ qce_write(qce, REG_GOPROC, BIT(GO_SHIFT) | BIT(RESULTS_DUMP_SHIFT));
}
+#ifdef CONFIG_CRYPTO_DEV_QCE_SHA
static u32 qce_auth_cfg(unsigned long flags, u32 key_size)
{
u32 cfg = 0;
@@ -143,88 +147,6 @@ static u32 qce_auth_cfg(unsigned long fl
return cfg;
}
-static u32 qce_config_reg(struct qce_device *qce, int little)
-{
- u32 beats = (qce->burst_size >> 3) - 1;
- u32 pipe_pair = qce->pipe_pair_id;
- u32 config;
-
- config = (beats << REQ_SIZE_SHIFT) & REQ_SIZE_MASK;
- config |= BIT(MASK_DOUT_INTR_SHIFT) | BIT(MASK_DIN_INTR_SHIFT) |
- BIT(MASK_OP_DONE_INTR_SHIFT) | BIT(MASK_ERR_INTR_SHIFT);
- config |= (pipe_pair << PIPE_SET_SELECT_SHIFT) & PIPE_SET_SELECT_MASK;
- config &= ~HIGH_SPD_EN_N_SHIFT;
-
- if (little)
- config |= BIT(LITTLE_ENDIAN_MODE_SHIFT);
-
- return config;
-}
-
-void qce_cpu_to_be32p_array(__be32 *dst, const u8 *src, unsigned int len)
-{
- __be32 *d = dst;
- const u8 *s = src;
- unsigned int n;
-
- n = len / sizeof(u32);
- for (; n > 0; n--) {
- *d = cpu_to_be32p((const __u32 *) s);
- s += sizeof(__u32);
- d++;
- }
-}
-
-static void qce_xts_swapiv(__be32 *dst, const u8 *src, unsigned int ivsize)
-{
- u8 swap[QCE_AES_IV_LENGTH];
- u32 i, j;
-
- if (ivsize > QCE_AES_IV_LENGTH)
- return;
-
- memset(swap, 0, QCE_AES_IV_LENGTH);
-
- for (i = (QCE_AES_IV_LENGTH - ivsize), j = ivsize - 1;
- i < QCE_AES_IV_LENGTH; i++, j--)
- swap[i] = src[j];
-
- qce_cpu_to_be32p_array(dst, swap, QCE_AES_IV_LENGTH);
-}
-
-static void qce_xtskey(struct qce_device *qce, const u8 *enckey,
- unsigned int enckeylen, unsigned int cryptlen)
-{
- u32 xtskey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(u32)] = {0};
- unsigned int xtsklen = enckeylen / (2 * sizeof(u32));
- unsigned int xtsdusize;
-
- qce_cpu_to_be32p_array((__be32 *)xtskey, enckey + enckeylen / 2,
- enckeylen / 2);
- qce_write_array(qce, REG_ENCR_XTS_KEY0, xtskey, xtsklen);
-
- /* xts du size 512B */
- xtsdusize = min_t(u32, QCE_SECTOR_SIZE, cryptlen);
- qce_write(qce, REG_ENCR_XTS_DU_SIZE, xtsdusize);
-}
-
-static void qce_setup_config(struct qce_device *qce)
-{
- u32 config;
-
- /* get big endianness */
- config = qce_config_reg(qce, 0);
-
- /* clear status */
- qce_write(qce, REG_STATUS, 0);
- qce_write(qce, REG_CONFIG, config);
-}
-
-static inline void qce_crypto_go(struct qce_device *qce)
-{
- qce_write(qce, REG_GOPROC, BIT(GO_SHIFT) | BIT(RESULTS_DUMP_SHIFT));
-}
-
static int qce_setup_regs_ahash(struct crypto_async_request *async_req,
u32 totallen, u32 offset)
{
@@ -309,6 +231,87 @@ go_proc:
return 0;
}
+#endif
+
+#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER
+static u32 qce_encr_cfg(unsigned long flags, u32 aes_key_size)
+{
+ u32 cfg = 0;
+
+ if (IS_AES(flags)) {
+ if (aes_key_size == AES_KEYSIZE_128)
+ cfg |= ENCR_KEY_SZ_AES128 << ENCR_KEY_SZ_SHIFT;
+ else if (aes_key_size == AES_KEYSIZE_256)
+ cfg |= ENCR_KEY_SZ_AES256 << ENCR_KEY_SZ_SHIFT;
+ }
+
+ if (IS_AES(flags))
+ cfg |= ENCR_ALG_AES << ENCR_ALG_SHIFT;
+ else if (IS_DES(flags) || IS_3DES(flags))
+ cfg |= ENCR_ALG_DES << ENCR_ALG_SHIFT;
+
+ if (IS_DES(flags))
+ cfg |= ENCR_KEY_SZ_DES << ENCR_KEY_SZ_SHIFT;
+
+ if (IS_3DES(flags))
+ cfg |= ENCR_KEY_SZ_3DES << ENCR_KEY_SZ_SHIFT;
+
+ switch (flags & QCE_MODE_MASK) {
+ case QCE_MODE_ECB:
+ cfg |= ENCR_MODE_ECB << ENCR_MODE_SHIFT;
+ break;
+ case QCE_MODE_CBC:
+ cfg |= ENCR_MODE_CBC << ENCR_MODE_SHIFT;
+ break;
+ case QCE_MODE_CTR:
+ cfg |= ENCR_MODE_CTR << ENCR_MODE_SHIFT;
+ break;
+ case QCE_MODE_XTS:
+ cfg |= ENCR_MODE_XTS << ENCR_MODE_SHIFT;
+ break;
+ case QCE_MODE_CCM:
+ cfg |= ENCR_MODE_CCM << ENCR_MODE_SHIFT;
+ cfg |= LAST_CCM_XFR << LAST_CCM_SHIFT;
+ break;
+ default:
+ return ~0;
+ }
+
+ return cfg;
+}
+
+static void qce_xts_swapiv(__be32 *dst, const u8 *src, unsigned int ivsize)
+{
+ u8 swap[QCE_AES_IV_LENGTH];
+ u32 i, j;
+
+ if (ivsize > QCE_AES_IV_LENGTH)
+ return;
+
+ memset(swap, 0, QCE_AES_IV_LENGTH);
+
+ for (i = (QCE_AES_IV_LENGTH - ivsize), j = ivsize - 1;
+ i < QCE_AES_IV_LENGTH; i++, j--)
+ swap[i] = src[j];
+
+ qce_cpu_to_be32p_array(dst, swap, QCE_AES_IV_LENGTH);
+}
+
+static void qce_xtskey(struct qce_device *qce, const u8 *enckey,
+ unsigned int enckeylen, unsigned int cryptlen)
+{
+ u32 xtskey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(u32)] = {0};
+ unsigned int xtsklen = enckeylen / (2 * sizeof(u32));
+ unsigned int xtsdusize;
+
+ qce_cpu_to_be32p_array((__be32 *)xtskey, enckey + enckeylen / 2,
+ enckeylen / 2);
+ qce_write_array(qce, REG_ENCR_XTS_KEY0, xtskey, xtsklen);
+
+ /* xts du size 512B */
+ xtsdusize = min_t(u32, QCE_SECTOR_SIZE, cryptlen);
+ qce_write(qce, REG_ENCR_XTS_DU_SIZE, xtsdusize);
+}
static int qce_setup_regs_skcipher(struct crypto_async_request *async_req,
u32 totallen, u32 offset)
@@ -390,15 +393,20 @@ static int qce_setup_regs_skcipher(struc
return 0;
}
+#endif
int qce_start(struct crypto_async_request *async_req, u32 type, u32 totallen,
u32 offset)
{
switch (type) {
+#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER
case CRYPTO_ALG_TYPE_SKCIPHER:
return qce_setup_regs_skcipher(async_req, totallen, offset);
+#endif
+#ifdef CONFIG_CRYPTO_DEV_QCE_SHA
case CRYPTO_ALG_TYPE_AHASH:
return qce_setup_regs_ahash(async_req, totallen, offset);
+#endif
default:
return -EINVAL;
}
--- a/drivers/crypto/qce/core.c
+++ b/drivers/crypto/qce/core.c
@@ -30,8 +30,12 @@
#define QCE_QUEUE_LENGTH 1
static const struct qce_algo_ops *qce_ops[] = {
+#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER
&skcipher_ops,
+#endif
+#ifdef CONFIG_CRYPTO_DEV_QCE_SHA
&ahash_ops,
+#endif
};
static void qce_unregister_algs(struct qce_device *qce)

27
target/linux/ipq40xx/patches-4.19/070-v4.20-soc-qcom-spm-add-SCM-probe-dependency.patch
View File

@ -1,27 +0,0 @@
From 61a3bd10082b0e861b4e1bc451a92e20181a52f5 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@nbd.name>
Date: Mon, 23 Jul 2018 16:17:35 +0200
Subject: [PATCH] soc: qcom: spm: add SCM probe dependency
Check for SCM availability before attempting to use SPM. SPM probe will
fail otherwise.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
---
drivers/soc/qcom/spm.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/soc/qcom/spm.c
+++ b/drivers/soc/qcom/spm.c
@@ -219,6 +219,9 @@ static int __init qcom_cpuidle_init(stru
cpumask_t mask;
bool use_scm_power_down = false;
+ if (!qcom_scm_is_available())
+ return -EPROBE_DEFER;
+
for (i = 0; ; i++) {
state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
if (!state_node)

97
target/linux/ipq40xx/patches-4.19/071-01-v4.20-ARM-dts-qcom-ipq4019-use-v2-of-the-kpss-bringup-mech.patch
View File

@ -1,97 +0,0 @@
From 233c77d4f1d12e4337fba1146d5197f4c0f9107d Mon Sep 17 00:00:00 2001
From: Matthew McClintock <mmcclint@codeaurora.org>
Date: Wed, 25 Jul 2018 10:37:45 +0200
Subject: [PATCH] ARM: dts: qcom: ipq4019: use v2 of the kpss bringup mechanism
v1 was the incorrect choice here and sometimes the board
would not come up properly.
Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 25 +++++++++++++++++--------
1 file changed, 17 insertions(+), 8 deletions(-)
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -52,7 +52,8 @@
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- enable-method = "qcom,kpss-acc-v1";
+ enable-method = "qcom,kpss-acc-v2";
+ next-level-cache = <&L2>;
qcom,acc = <&acc0>;
qcom,saw = <&saw0>;
reg = <0x0>;
@@ -71,7 +72,8 @@
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- enable-method = "qcom,kpss-acc-v1";
+ enable-method = "qcom,kpss-acc-v2";
+ next-level-cache = <&L2>;
qcom,acc = <&acc1>;
qcom,saw = <&saw1>;
reg = <0x1>;
@@ -90,7 +92,8 @@
cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- enable-method = "qcom,kpss-acc-v1";
+ enable-method = "qcom,kpss-acc-v2";
+ next-level-cache = <&L2>;
qcom,acc = <&acc2>;
qcom,saw = <&saw2>;
reg = <0x2>;
@@ -109,7 +112,8 @@
cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- enable-method = "qcom,kpss-acc-v1";
+ enable-method = "qcom,kpss-acc-v2";
+ next-level-cache = <&L2>;
qcom,acc = <&acc3>;
qcom,saw = <&saw3>;
reg = <0x3>;
@@ -124,6 +128,11 @@
>;
clock-latency = <256000>;
};
+
+ L2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
};
pmu {
@@ -292,22 +301,22 @@
};
acc0: clock-controller@b088000 {
- compatible = "qcom,kpss-acc-v1";
+ compatible = "qcom,kpss-acc-v2";
reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
};
acc1: clock-controller@b098000 {
- compatible = "qcom,kpss-acc-v1";
+ compatible = "qcom,kpss-acc-v2";
reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
};
acc2: clock-controller@b0a8000 {
- compatible = "qcom,kpss-acc-v1";
+ compatible = "qcom,kpss-acc-v2";
reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
};
acc3: clock-controller@b0b8000 {
- compatible = "qcom,kpss-acc-v1";
+ compatible = "qcom,kpss-acc-v2";
reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
};

38
target/linux/ipq40xx/patches-4.19/071-02-ipq40xx-Fix-booting-secondary-cores.patch
View File

@ -1,38 +0,0 @@
From 8a4540321e8bcf7a5b485c332a2e78f3501c78ed Mon Sep 17 00:00:00 2001
From: Robert Marko <robimarko@gmail.com>
Date: Thu, 29 Nov 2018 22:29:36 +0100
Subject: [PATCH] ipq40xx: Fix booting secondary cores
Add the second part of old 071-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch
We dont modify the patch itself as its upstream and this change is not.
Originally added by Mantas Pucka Mantas Pucka <mantas@8devices.com>
Signed-off-by: Robert Marko <robimarko@gmail.com>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -132,6 +132,7 @@
L2: l2-cache {
compatible = "cache";
cache-level = <2>;
+ qcom,saw = <&saw_l2>;
};
};
@@ -344,6 +345,12 @@
regulator;
};
+ saw_l2: regulator@b012000 {
+ compatible = "qcom,saw2";
+ reg = <0xb012000 0x1000>;
+ regulator;
+ };
+
blsp1_uart1: serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x78af000 0x200>;

114
target/linux/ipq40xx/patches-4.19/072-v4.20-ARM-dts-qcom-ipq4019-add-cpu-operating-points-for-cp.patch
View File

@ -1,114 +0,0 @@
From bcb9ab4c2917e92114d2f4c2b1da97cdf15b471b Mon Sep 17 00:00:00 2001
From: Matthew McClintock <mmcclint@codeaurora.org>
Date: Wed, 25 Jul 2018 10:37:46 +0200
Subject: [PATCH] ARM: dts: qcom: ipq4019: add cpu operating points for cpufreq
support
This adds some operating points for cpu frequeny scaling
Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 58 ++++++++++++++---------------
1 file changed, 30 insertions(+), 28 deletions(-)
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -59,14 +59,8 @@
reg = <0x0>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
- operating-points = <
- /* kHz uV (fixed) */
- 48000 1100000
- 200000 1100000
- 500000 1100000
- 716000 1100000
- >;
clock-latency = <256000>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu@1 {
@@ -79,14 +73,8 @@
reg = <0x1>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
- operating-points = <
- /* kHz uV (fixed) */
- 48000 1100000
- 200000 1100000
- 500000 1100000
- 666000 1100000
- >;
clock-latency = <256000>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu@2 {
@@ -99,14 +87,8 @@
reg = <0x2>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
- operating-points = <
- /* kHz uV (fixed) */
- 48000 1100000
- 200000 1100000
- 500000 1100000
- 666000 1100000
- >;
clock-latency = <256000>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu@3 {
@@ -119,14 +101,8 @@
reg = <0x3>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
- operating-points = <
- /* kHz uV (fixed) */
- 48000 1100000
- 200000 1100000
- 500000 1100000
- 666000 1100000
- >;
clock-latency = <256000>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
L2: l2-cache {
@@ -136,6 +112,32 @@
};
};
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-48000000 {
+ opp-hz = /bits/ 64 <48000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <256000>;
+ };
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <256000>;
+ };
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <256000>;
+ };
+ opp-716000000 {
+ opp-hz = /bits/ 64 <716000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <256000>;
+ };
+ };
+
pmu {
compatible = "arm,cortex-a7-pmu";
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |

36
target/linux/ipq40xx/patches-4.19/074-ARM-qcom-Add-IPQ4019-SoC-support.patch
View File

@ -1,36 +0,0 @@
From 89b43d59ec8c9cda588555eb1f2754dd19ef5144 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@gmail.com>
Date: Sun, 22 Jul 2018 12:07:57 +0200
Subject: [PATCH 8/8] ARM: qcom: Add IPQ4019 SoC support
Add support for the Qualcomm Atheros IPQ4019 SoC.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
arch/arm/Makefile | 1 +
arch/arm/mach-qcom/Kconfig | 5 +++++
2 files changed, 6 insertions(+)
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -150,6 +150,7 @@ textofs-$(CONFIG_ARCH_MSM8X60) := 0x0020
textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
textofs-$(CONFIG_ARCH_MESON) := 0x00208000
textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
+textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -27,4 +27,9 @@ config ARCH_MDM9615
bool "Enable support for MDM9615"
select CLKSRC_QCOM
+config ARCH_IPQ40XX
+ bool "Enable support for IPQ40XX"
+ select CLKSRC_QCOM
+ select HAVE_ARM_ARCH_TIMER
+
endif

38
target/linux/ipq40xx/patches-4.19/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch
View File

@ -1,38 +0,0 @@
From 5f01733dc755dfadfa51b7b3c6c160e632fc6002 Mon Sep 17 00:00:00 2001
From: John Crispin <john@phrozen.org>
Date: Tue, 24 Jul 2018 15:09:36 +0200
Subject: [PATCH 1/3] dt-bindings: phy-qcom-ipq4019-usb: add binding document
This patch adds the binding documentation for the HS/SS USB PHY found
inside Qualcom Dakota SoCs.
Signed-off-by: John Crispin <john@phrozen.org>
---
.../bindings/phy/phy-qcom-ipq4019-usb.txt | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
@@ -0,0 +1,21 @@
+Qualcom Dakota HS/SS USB PHY
+
+Required properties:
+ - compatible: "qcom,usb-ss-ipq4019-phy",
+ "qcom,usb-hs-ipq4019-phy"
+ - reg: offset and length of the registers
+ - #phy-cells: should be 0
+ - resets: the reset controllers as listed below
+ - reset-names: the names of the reset controllers
+ "por_rst" - the POR reset line for SS and HS phys
+ "srif_rst" - the SRIF reset line for HS phys
+Example:
+
+hsphy@a8000 {
+ compatible = "qcom,usb-hs-ipq4019-phy";
+ phy-cells = <0>;
+ reg = <0xa8000 0x40>;
+ resets = <&gcc USB2_HSPHY_POR_ARES>,
+ <&gcc USB2_HSPHY_S_ARES>;
+ reset-names = "por_rst", "srif_rst";
+};

234
target/linux/ipq40xx/patches-4.19/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch
View File

@ -1,234 +0,0 @@
From 633f0e08498aebfdb932bd71319b4cb136709499 Mon Sep 17 00:00:00 2001
From: John Crispin <john@phrozen.org>
Date: Tue, 24 Jul 2018 14:45:49 +0200
Subject: [PATCH 2/3] phy: qcom-ipq4019-usb: add driver for QCOM/IPQ4019
Add a driver to setup the USB phy on Qualcom Dakota SoCs.
The driver sets up HS and SS phys. In case of HS some magic values need to
be written to magic offsets. These were taken from the SDK driver.
Signed-off-by: John Crispin <john@phrozen.org>
---
drivers/phy/qualcomm/Kconfig | 7 ++
drivers/phy/qualcomm/Makefile | 1 +
drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 188 ++++++++++++++++++++++++++++
3 files changed, 196 insertions(+)
create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
@@ -17,6 +17,13 @@ config PHY_QCOM_APQ8064_SATA
depends on OF
select GENERIC_PHY
+config PHY_QCOM_IPQ4019_USB
+ tristate "Qualcomm IPQ4019 USB PHY module"
+ depends on OF && ARCH_QCOM
+ select GENERIC_PHY
+ help
+ Support for the USB PHY on QCOM IPQ4019/Dakota chipsets.
+
config PHY_QCOM_IPQ806X_SATA
tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
depends on ARCH_QCOM
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
@@ -0,0 +1,188 @@
+/*
+ * Copyright (C) 2018 John Crispin <john@phrozen.org>
+ *
+ * Based on code from
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+/*
+ * Magic registers copied from the SDK driver code
+ */
+#define PHY_CTRL0_ADDR 0x000
+#define PHY_CTRL1_ADDR 0x004
+#define PHY_CTRL2_ADDR 0x008
+#define PHY_CTRL3_ADDR 0x00C
+#define PHY_CTRL4_ADDR 0x010
+#define PHY_MISC_ADDR 0x024
+#define PHY_IPG_ADDR 0x030
+
+#define PHY_CTRL0_VAL 0xA4600015
+#define PHY_CTRL1_VAL 0x09500000
+#define PHY_CTRL2_VAL 0x00058180
+#define PHY_CTRL3_VAL 0x6DB6DCD6
+#define PHY_CTRL4_VAL 0x836DB6DB
+#define PHY_MISC_VAL 0x3803FB0C
+#define PHY_IPG_VAL 0x47323232
+
+struct ipq4019_usb_phy {
+ struct device *dev;
+ struct phy *phy;
+ void __iomem *base;
+ struct reset_control *por_rst;
+ struct reset_control *srif_rst;
+};
+
+static int ipq4019_ss_phy_power_off(struct phy *_phy)
+{
+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
+
+ reset_control_assert(phy->por_rst);
+ msleep(10);
+
+ return 0;
+}
+
+static int ipq4019_ss_phy_power_on(struct phy *_phy)
+{
+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
+
+ ipq4019_ss_phy_power_off(_phy);
+
+ reset_control_deassert(phy->por_rst);
+
+ return 0;
+}
+
+static struct phy_ops ipq4019_usb_ss_phy_ops = {
+ .power_on = ipq4019_ss_phy_power_on,
+ .power_off = ipq4019_ss_phy_power_off,
+};
+
+static int ipq4019_hs_phy_power_off(struct phy *_phy)
+{
+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
+
+ reset_control_assert(phy->por_rst);
+ msleep(10);
+
+ reset_control_assert(phy->srif_rst);
+ msleep(10);
+
+ return 0;
+}
+
+static int ipq4019_hs_phy_power_on(struct phy *_phy)
+{
+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
+
+ ipq4019_hs_phy_power_off(_phy);
+
+ reset_control_deassert(phy->srif_rst);
+ msleep(10);
+
+ writel(PHY_CTRL0_VAL, phy->base + PHY_CTRL0_ADDR);
+ writel(PHY_CTRL1_VAL, phy->base + PHY_CTRL1_ADDR);
+ writel(PHY_CTRL2_VAL, phy->base + PHY_CTRL2_ADDR);
+ writel(PHY_CTRL3_VAL, phy->base + PHY_CTRL3_ADDR);
+ writel(PHY_CTRL4_VAL, phy->base + PHY_CTRL4_ADDR);
+ writel(PHY_MISC_VAL, phy->base + PHY_MISC_ADDR);
+ writel(PHY_IPG_VAL, phy->base + PHY_IPG_ADDR);
+ msleep(10);
+
+ reset_control_deassert(phy->por_rst);
+
+ return 0;
+}
+
+static struct phy_ops ipq4019_usb_hs_phy_ops = {
+ .power_on = ipq4019_hs_phy_power_on,
+ .power_off = ipq4019_hs_phy_power_off,
+};
+
+static const struct of_device_id ipq4019_usb_phy_of_match[] = {
+ { .compatible = "qcom,usb-hs-ipq4019-phy", .data = &ipq4019_usb_hs_phy_ops},
+ { .compatible = "qcom,usb-ss-ipq4019-phy", .data = &ipq4019_usb_ss_phy_ops},
+ { },
+};
+MODULE_DEVICE_TABLE(of, ipq4019_usb_phy_of_match);
+
+static int ipq4019_usb_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ struct phy_provider *phy_provider;
+ struct ipq4019_usb_phy *phy;
+ const struct of_device_id *match;
+
+ match = of_match_device(ipq4019_usb_phy_of_match, &pdev->dev);
+ if (!match)
+ return -ENODEV;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ phy->dev = &pdev->dev;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ phy->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(phy->base)) {
+ dev_err(dev, "failed to remap register memory\n");
+ return PTR_ERR(phy->base);
+ }
+
+ phy->por_rst = devm_reset_control_get(phy->dev, "por_rst");
+ if (IS_ERR(phy->por_rst)) {
+ if (PTR_ERR(phy->por_rst) != -EPROBE_DEFER)
+ dev_err(dev, "POR reset is missing\n");
+ return PTR_ERR(phy->por_rst);
+ }
+
+ phy->srif_rst = devm_reset_control_get_optional(phy->dev, "srif_rst");
+ if (IS_ERR(phy->srif_rst))
+ return PTR_ERR(phy->srif_rst);
+
+ phy->phy = devm_phy_create(dev, NULL, match->data);
+ if (IS_ERR(phy->phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(phy->phy);
+ }
+ phy_set_drvdata(phy->phy, phy);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver ipq4019_usb_phy_driver = {
+ .probe = ipq4019_usb_phy_probe,
+ .driver = {
+ .of_match_table = ipq4019_usb_phy_of_match,
+ .name = "ipq4019-usb-phy",
+ }
+};
+module_platform_driver(ipq4019_usb_phy_driver);
+
+MODULE_DESCRIPTION("QCOM/IPQ4019 USB phy driver");
+MODULE_AUTHOR("John Crispin <john@phrozen.org>");
+MODULE_LICENSE("GPL v2");
--- a/drivers/phy/qualcomm/Makefile
+++ b/drivers/phy/qualcomm/Makefile
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_PHY_ATH79_USB) += phy-ath79-usb.o
obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
+obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o
obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o
obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o

123
target/linux/ipq40xx/patches-4.19/077-qcom-ipq4019-add-USB-devicetree-nodes.patch
View File

@ -1,123 +0,0 @@
From 1fc7d5523e21ed140fed43c4dde011a3b6d9ba08 Mon Sep 17 00:00:00 2001
From: John Crispin <john@phrozen.org>
Date: Tue, 24 Jul 2018 14:47:55 +0200
Subject: [PATCH 3/3] qcom: ipq4019: add USB devicetree nodes
This patch makes USB work on the Dakota EVB.
Signed-off-by: John Crispin <john@phrozen.org>
---
arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 20 ++++++++
arch/arm/boot/dts/qcom-ipq4019.dtsi | 74 +++++++++++++++++++++++++++
2 files changed, 94 insertions(+)
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -109,5 +109,25 @@
wifi@a800000 {
status = "ok";
};
+
+ usb3_ss_phy: ssphy@9a000 {
+ status = "okay";
+ };
+
+ usb3_hs_phy: hsphy@a6000 {
+ status = "okay";
+ };
+
+ usb3: usb3@8af8800 {
+ status = "okay";
+ };
+
+ usb2_hs_phy: hsphy@a8000 {
+ status = "okay";
+ };
+
+ usb2: usb2@60f8800 {
+ status = "okay";
+ };
};
};
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -568,5 +568,79 @@
"legacy";
status = "disabled";
};
+
+ usb3_ss_phy: ssphy@9a000 {
+ compatible = "qcom,usb-ss-ipq4019-phy";
+ #phy-cells = <0>;
+ reg = <0x9a000 0x800>;
+ reg-names = "phy_base";
+ resets = <&gcc USB3_UNIPHY_PHY_ARES>;
+ reset-names = "por_rst";
+ status = "disabled";
+ };
+
+ usb3_hs_phy: hsphy@a6000 {
+ compatible = "qcom,usb-hs-ipq4019-phy";
+ #phy-cells = <0>;
+ reg = <0xa6000 0x40>;
+ reg-names = "phy_base";
+ resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
+ reset-names = "por_rst", "srif_rst";
+ status = "disabled";
+ };
+
+ usb3@8af8800 {
+ compatible = "qcom,dwc3";
+ reg = <0x8af8800 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&gcc GCC_USB3_MASTER_CLK>,
+ <&gcc GCC_USB3_SLEEP_CLK>,
+ <&gcc GCC_USB3_MOCK_UTMI_CLK>;
+ clock-names = "master", "sleep", "mock_utmi";
+ ranges;
+ status = "disabled";
+
+ dwc3@8a00000 {
+ compatible = "snps,dwc3";
+ reg = <0x8a00000 0xf8000>;
+ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ dr_mode = "host";
+ };
+ };
+
+ usb2_hs_phy: hsphy@a8000 {
+ compatible = "qcom,usb-hs-ipq4019-phy";
+ #phy-cells = <0>;
+ reg = <0xa8000 0x40>;
+ reg-names = "phy_base";
+ resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
+ reset-names = "por_rst", "srif_rst";
+ status = "disabled";
+ };
+
+ usb2@60f8800 {
+ compatible = "qcom,dwc3";
+ reg = <0x60f8800 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&gcc GCC_USB2_MASTER_CLK>,
+ <&gcc GCC_USB2_SLEEP_CLK>,
+ <&gcc GCC_USB2_MOCK_UTMI_CLK>;
+ clock-names = "master", "sleep", "mock_utmi";
+ ranges;
+ status = "disabled";
+
+ dwc3@6000000 {
+ compatible = "snps,dwc3";
+ reg = <0x6000000 0xf8000>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb2_hs_phy>;
+ phy-names = "usb2-phy";
+ dr_mode = "host";
+ };
+ };
};
};

70
target/linux/ipq40xx/patches-4.19/080-ARM-dts-qcom-add-gpio-ranges-property.patch
View File

@ -1,70 +0,0 @@
From patchwork Mon May 21 20:57:38 2018
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v5,3/4] ARM: dts: qcom: add gpio-ranges property
X-Patchwork-Submitter: Christian Lamparter <chunkeey@gmail.com>
X-Patchwork-Id: 917856
Message-Id: <0ae3376606a89bcdf3fe753a5c967f7103699e09.1526935804.git.chunkeey@gmail.com>
To: linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>,
Stephen Boyd <sboyd@kernel.org>, David Brown <david.brown@linaro.org>,
Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>,
Andy Gross <andy.gross@linaro.org>,
Sven Eckelmann <sven.eckelmann@openmesh.com>
Date: Mon, 21 May 2018 22:57:38 +0200
From: Christian Lamparter <chunkeey@gmail.com>
List-Id: <linux-gpio.vger.kernel.org>
This patch adds the gpio-ranges property to almost all of
the Qualcomm ARM platforms that utilize the pinctrl-msm
framework.
The gpio-ranges property is part of the gpiolib subsystem.
As a result, the binding text is available in section
"2.1 gpio- and pin-controller interaction" of
Documentation/devicetree/bindings/gpio/gpio.txt
For more information please see the patch titled:
"pinctrl: msm: fix gpio-hog related boot issues" from
this series.
Reported-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Tested-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [ipq4019]
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
To help with git bisect, the DT update patch has been intentionally
placed after the "pinctrl: msm: fix gpio-hog related boot issues".
Otherwise - if the order was reveresed - and bisect decides to split
between these two patches, the gpiochip_add_pin_ranges() function
will be executed twice with the same parameters for the same pinctrl.
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 1 +
arch/arm/boot/dts/qcom-apq8084.dtsi | 1 +
arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 +
arch/arm/boot/dts/qcom-ipq8064.dtsi | 1 +
arch/arm/boot/dts/qcom-mdm9615.dtsi | 1 +
arch/arm/boot/dts/qcom-msm8660.dtsi | 1 +
arch/arm/boot/dts/qcom-msm8960.dtsi | 1 +
arch/arm/boot/dts/qcom-msm8974.dtsi | 1 +
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 3 ++-
arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 +
arch/arm64/boot/dts/qcom/msm8992.dtsi | 1 +
arch/arm64/boot/dts/qcom/msm8994.dtsi | 1 +
arch/arm64/boot/dts/qcom/msm8996.dtsi | 1 +
13 files changed, 14 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -206,6 +206,7 @@
compatible = "qcom,ipq4019-pinctrl";
reg = <0x01000000 0x300000>;
gpio-controller;
+ gpio-ranges = <&tlmm 0 0 100>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;

115
target/linux/ipq40xx/patches-4.19/081-clk-fix-apss-cpu-overclocking.patch
View File

@ -1,115 +0,0 @@
From f2b87dc1028b710ec8ce25808b9d21f92b376184 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Sun, 11 Mar 2018 14:41:31 +0100
Subject: [PATCH 2/2] clk: fix apss cpu overclocking
There's an interaction issue between the clk changes:"
clk: qcom: ipq4019: Add the apss cpu pll divider clock node
clk: qcom: ipq4019: remove fixed clocks and add pll clocks
" and the cpufreq-dt.
cpufreq-dt is now spamming the kernel-log with the following:
[ 1099.190658] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP
for freq 761142857 (-34)
This only happens on certain devices like the Compex WPJ428
and AVM FritzBox!4040. However, other devices like the Asus
RT-AC58U and Meraki MR33 work just fine.
The issue stem from the fact that all higher CPU-Clocks
are achieved by switching the clock-parent to the P_DDRPLLAPSS
(ddrpllapss). Which is set by Qualcomm's proprietary bootcode
as part of the DDR calibration.
For example, the FB4040 uses 256 MiB Nanya NT5CC128M16IP clocked
at round 533 MHz (ddrpllsdcc = 190285714 Hz).
whereas the 128 MiB Nanya NT5CC64M16GP-DI in the ASUS RT-AC58U is
clocked at a slightly higher 537 MHz ( ddrpllsdcc = 192000000 Hz).
This patch attempts to fix the issue by modifying
clk_cpu_div_round_rate(), clk_cpu_div_set_rate(), clk_cpu_div_recalc_rate()
to use a new qcom_find_freq_close() function, which returns the closest
matching frequency, instead of the next higher. This way, the SoC in
the FB4040 (with its max clock speed of 710.4 MHz) will no longer
try to overclock to 761 MHz.
Fixes: d83dcacea18 ("clk: qcom: ipq4019: Add the apss cpu pll divider clock node")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
drivers/clk/qcom/gcc-ipq4019.c | 34 +++++++++++++++++++++++++++++++---
1 file changed, 31 insertions(+), 3 deletions(-)
--- a/drivers/clk/qcom/gcc-ipq4019.c
+++ b/drivers/clk/qcom/gcc-ipq4019.c
@@ -1251,6 +1251,29 @@ static const struct clk_fepll_vco gcc_fe
.reg = 0x2f020,
};
+
+const struct freq_tbl *qcom_find_freq_close(const struct freq_tbl *f,
+ unsigned long rate)
+{
+ const struct freq_tbl *last = NULL;
+
+ for ( ; f->freq; f++) {
+ if (rate == f->freq)
+ return f;
+
+ if (f->freq > rate) {
+ if (!last ||
+ (f->freq - rate) < (rate - last->freq))
+ return f;
+ else
+ return last;
+ }
+ last = f;
+ }
+
+ return last;
+}
+
/*
* Round rate function for APSS CPU PLL Clock divider.
* It looks up the frequency table and returns the next higher frequency
@@ -1263,7 +1286,7 @@ static long clk_cpu_div_round_rate(struc
struct clk_hw *p_hw;
const struct freq_tbl *f;
- f = qcom_find_freq(pll->freq_tbl, rate);
+ f = qcom_find_freq_close(pll->freq_tbl, rate);
if (!f)
return -EINVAL;
@@ -1286,7 +1309,7 @@ static int clk_cpu_div_set_rate(struct c
u32 mask;
int ret;
- f = qcom_find_freq(pll->freq_tbl, rate);
+ f = qcom_find_freq_close(pll->freq_tbl, rate);
if (!f)
return -EINVAL;
@@ -1313,6 +1336,7 @@ static unsigned long
clk_cpu_div_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
+ const struct freq_tbl *f;
struct clk_fepll *pll = to_clk_fepll(hw);
u32 cdiv, pre_div;
u64 rate;
@@ -1333,7 +1357,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *h
rate = clk_fepll_vco_calc_rate(pll, parent_rate) * 2;
do_div(rate, pre_div);
- return rate;
+ f = qcom_find_freq_close(pll->freq_tbl, rate);
+ if (!f)
+ return rate;
+
+ return f->freq;
};
static const struct clk_ops clk_regmap_cpu_div_ops = {

29
target/linux/ipq40xx/patches-4.19/086-ipq40xx-fix-high-resolution-timer.patch
View File

@ -1,29 +0,0 @@
From 09f145f417a5d64d6b8d4476699dfb0eccc6c784 Mon Sep 17 00:00:00 2001
From: Abhishek Sahu <absahu@codeaurora.org>
Date: Tue, 7 May 2019 10:14:05 +0300
Subject: [PATCH] ipq40xx: fix high resolution timer
Cherry-picked from CAF QSDK repo.
Original commit message:
The kernel is failing in switching the timer for high resolution
mode and clock source operates in 10ms resolution. The always-on
property needs to be given for timer device tree node to make
clock source working in 1ns resolution.
Change-Id: I7c00b3c74d97c2a30ac9f05e18b511a0550fd459
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -171,6 +171,7 @@
<1 4 0xf08>,
<1 1 0xf08>;
clock-frequency = <48000000>;
+ always-on;
};
soc {

153
target/linux/ipq40xx/patches-4.19/088-v5.6-regulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch
View File

@ -1,153 +0,0 @@
From 97043d292365ae39d62b54a6d79dff98d048b501 Mon Sep 17 00:00:00 2001
From: Robert Marko <robert.marko@sartura.hr>
Date: Wed, 22 Jan 2020 12:44:14 +0100
Subject: [PATCH] From ebf652b408200504194be32ad0a3f5bb49d6000a Mon Sep 17
00:00:00 2001 From: Robert Marko <robert.marko@sartura.hr> Date: Sun, 12 Jan
2020 12:30:01 +0100 Subject: [PATCH] regulator: add IPQ4019 SDHCI VQMMC LDO
driver
This introduces the IPQ4019 VQMMC LDO driver needed for
the SD/EMMC driver I/O level operation.
This will enable introducing SD/EMMC support for the built-in controller.
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://lore.kernel.org/r/20200112113003.11110-1-robert.marko@sartura.hr
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/Kconfig | 7 ++
drivers/regulator/Makefile | 1 +
drivers/regulator/vqmmc-ipq4019-regulator.c | 101 ++++++++++++++++++++
3 files changed, 109 insertions(+)
create mode 100644 drivers/regulator/vqmmc-ipq4019-regulator.c
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -981,6 +981,13 @@ config REGULATOR_VEXPRESS
This driver provides support for voltage regulators available
on the ARM Ltd's Versatile Express platform.
+config REGULATOR_VQMMC_IPQ4019
+ tristate "IPQ4019 VQMMC SD LDO regulator support"
+ depends on ARCH_QCOM
+ help
+ This driver provides support for the VQMMC LDO I/0
+ voltage regulator of the IPQ4019 SD/EMMC controller.
+
config REGULATOR_WM831X
tristate "Wolfson Microelectronics WM831x PMIC regulators"
depends on MFD_WM831X
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -122,6 +122,7 @@ obj-$(CONFIG_REGULATOR_TWL4030) += twl-r
obj-$(CONFIG_REGULATOR_UNIPHIER) += uniphier-regulator.o
obj-$(CONFIG_REGULATOR_VCTRL) += vctrl-regulator.o
obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress-regulator.o
+obj-$(CONFIG_REGULATOR_VQMMC_IPQ4019) += vqmmc-ipq4019-regulator.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
--- /dev/null
+++ b/drivers/regulator/vqmmc-ipq4019-regulator.c
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2019 Mantas Pucka <mantas@8devices.com>
+// Copyright (c) 2019 Robert Marko <robert.marko@sartura.hr>
+//
+// Driver for IPQ4019 SD/MMC controller's I/O LDO voltage regulator
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+
+static const unsigned int ipq4019_vmmc_voltages[] = {
+ 1500000, 1800000, 2500000, 3000000,
+};
+
+static const struct regulator_ops ipq4019_regulator_voltage_ops = {
+ .list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_ascend,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_desc vmmc_regulator = {
+ .name = "vmmcq",
+ .ops = &ipq4019_regulator_voltage_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .volt_table = ipq4019_vmmc_voltages,
+ .n_voltages = ARRAY_SIZE(ipq4019_vmmc_voltages),
+ .vsel_reg = 0,
+ .vsel_mask = 0x3,
+};
+
+static const struct regmap_config ipq4019_vmmcq_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+};
+
+static int ipq4019_regulator_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct regulator_init_data *init_data;
+ struct regulator_config cfg = {};
+ struct regulator_dev *rdev;
+ struct resource *res;
+ struct regmap *rmap;
+ void __iomem *base;
+
+ init_data = of_get_regulator_init_data(dev, dev->of_node,
+ &vmmc_regulator);
+ if (!init_data)
+ return -EINVAL;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ rmap = devm_regmap_init_mmio(dev, base, &ipq4019_vmmcq_regmap_config);
+ if (IS_ERR(rmap))
+ return PTR_ERR(rmap);
+
+ cfg.dev = dev;
+ cfg.init_data = init_data;
+ cfg.of_node = dev->of_node;
+ cfg.regmap = rmap;
+
+ rdev = devm_regulator_register(dev, &vmmc_regulator, &cfg);
+ if (IS_ERR(rdev)) {
+ dev_err(dev, "Failed to register regulator: %ld\n",
+ PTR_ERR(rdev));
+ return PTR_ERR(rdev);
+ }
+ platform_set_drvdata(pdev, rdev);
+
+ return 0;
+}
+
+static const struct of_device_id regulator_ipq4019_of_match[] = {
+ { .compatible = "qcom,vqmmc-ipq4019-regulator", },
+ {},
+};
+
+static struct platform_driver ipq4019_regulator_driver = {
+ .probe = ipq4019_regulator_probe,
+ .driver = {
+ .name = "vqmmc-ipq4019-regulator",
+ .of_match_table = of_match_ptr(regulator_ipq4019_of_match),
+ },
+};
+module_platform_driver(ipq4019_regulator_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mantas Pucka <mantas@8devices.com>");
+MODULE_DESCRIPTION("IPQ4019 VQMMC voltage regulator");

36
target/linux/ipq40xx/patches-4.19/089-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch
View File

@ -1,36 +0,0 @@
From 04b3b72b5b8fdb883bfdc619cb29b03641b1cc6a Mon Sep 17 00:00:00 2001
From: Robert Marko <robimarko@gmail.com>
Date: Thu, 15 Aug 2019 19:28:23 +0200
Subject: [PATCH] ARM: dts: qcom: ipq4019: Add SDHCI controller node
IPQ4019 has a built in SD/eMMC controller which is supported by the
SDHCI MSM driver, by the "qcom,sdhci-msm-v4" binding.
So lets add the appropriate node for it.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -214,6 +214,18 @@
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
};
+ sdhci: sdhci@7824900 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0x7824900 0x11c>, <0x7824000 0x800>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ bus-width = <8>;
+ clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_DCD_XO_CLK>;
+ clock-names = "core", "iface", "xo";
+ status = "disabled";
+ };
+
blsp_dma: dma@7884000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x07884000 0x23000>;

32
target/linux/ipq40xx/patches-4.19/100-arm-dts-IPQ4019-add-SDHCI-VQMMC-LDO-node.patch
View File

@ -1,32 +0,0 @@
From 77d9b11ae7269dcf376c3b9493209f712524e986 Mon Sep 17 00:00:00 2001
From: Robert Marko <robert.marko@sartura.hr>
Date: Wed, 22 Jan 2020 12:56:35 +0100
Subject: [PATCH] arm: dts: IPQ4019: add SDHCI VQMMC LDO node
Since we now have driver for the SDHCI VQMMC LDO needed
for I/0 voltage levels lets introduce the necessary node for it.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -214,6 +214,16 @@
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
};
+ vqmmc: regulator@1948000 {
+ compatible = "qcom,vqmmc-ipq4019-regulator";
+ reg = <0x01948000 0x4>;
+ regulator-name = "vqmmc";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ status = "disabled";
+ };
+
sdhci: sdhci@7824900 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x7824900 0x11c>, <0x7824000 0x800>;

62
target/linux/ipq40xx/patches-4.19/303-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch
View File

@ -1,62 +0,0 @@
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1099,6 +1099,7 @@ static const struct flash_info spi_nor_i
{ "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "mx25l25635f", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
@@ -1286,11 +1287,12 @@ static const struct flash_info spi_nor_i
{ },
};
-static const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
+static const struct flash_info *spi_nor_read_id(struct spi_nor *nor,
+ const char *name)
{
int tmp;
u8 id[SPI_NOR_MAX_ID_LEN];
- const struct flash_info *info;
+ const struct flash_info *info, *first_match = NULL;
tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
if (tmp < 0) {
@@ -1301,10 +1303,16 @@ static const struct flash_info *spi_nor_
for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) {
info = &spi_nor_ids[tmp];
if (info->id_len) {
- if (!memcmp(info->id, id, info->id_len))
- return &spi_nor_ids[tmp];
+ if (!memcmp(info->id, id, info->id_len)) {
+ if (!name || !strcmp(name, info->name))
+ return info;
+ if (!first_match)
+ first_match = info;
+ }
}
}
+ if (first_match)
+ return first_match;
dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n",
id[0], id[1], id[2]);
return ERR_PTR(-ENODEV);
@@ -2838,7 +2846,7 @@ int spi_nor_scan(struct spi_nor *nor, co
info = spi_nor_match_id(name);
/* Try to auto-detect if chip name wasn't specified or not found */
if (!info)
- info = spi_nor_read_id(nor);
+ info = spi_nor_read_id(nor, NULL);
if (IS_ERR_OR_NULL(info))
return -ENOENT;
@@ -2849,7 +2857,7 @@ int spi_nor_scan(struct spi_nor *nor, co
if (name && info->id_len) {
const struct flash_info *jinfo;
- jinfo = spi_nor_read_id(nor);
+ jinfo = spi_nor_read_id(nor, name);
if (IS_ERR(jinfo)) {
return PTR_ERR(jinfo);
} else if (jinfo != info) {

26
target/linux/ipq40xx/patches-4.19/304-mtd-spi-nor-Add-support-for-mx25r3235f.patch
View File

@ -1,26 +0,0 @@
From 158acdbf0336f601971637f988b57a6a67a0869b Mon Sep 17 00:00:00 2001
From: David Bauer <mail@david-bauer.net>
Date: Sun, 15 Dec 2019 13:10:50 +0100
Subject: [PATCH] mtd: spi-nor: Add support for mx25r3235f
Add MTD support for the Macronix MX25R3235F SPI NOR chip from Macronix.
The chip has 4MB of total capacity, divided into a total of 64 sectors,
each 64KB sized. The chip also supports 4KB large sectors.
Additionally, it supports dual and quad read modes.
Signed-off-by: David Bauer <mail@david-bauer.net>
---
drivers/mtd/spi-nor/spi-nor.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1096,6 +1096,8 @@ static const struct flash_info spi_nor_i
{ "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
+ { "mx25r3235f", INFO(0xc22816, 0, 64 * 1024, 64,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },

10
target/linux/ipq40xx/patches-4.19/305-spi-nor-add-en25qh16.patch
View File

@ -1,10 +0,0 @@
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -995,6 +995,7 @@ static const struct flash_info spi_nor_i
{ "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
{ "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) },
{ "en25q128", INFO(0x1c3018, 0, 64 * 1024, 256, SECT_4K) },
+ { "en25qh16", INFO(0x1c7015, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_DUAL_READ) },
{ "en25qh32", INFO(0x1c7016, 0, 64 * 1024, 64, 0) },
{ "en25qh64", INFO(0x1c7017, 0, 64 * 1024, 128, 0) },
{ "en25qh128", INFO(0x1c7018, 0, 64 * 1024, 256, 0) },

25
target/linux/ipq40xx/patches-4.19/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch
View File

@ -1,25 +0,0 @@
From 0e28623a11f3916c1fe5b7e789c7ab8ca932a929 Mon Sep 17 00:00:00 2001
From: Robert Marko <robimarko@gmail.com>
Date: Wed, 22 Jan 2020 13:02:13 +0100
Subject: [PATCH] mmc: sdhci: sdhci-msm: use sdhci_set_clock instead of
sdhci_msm_set_clock
When using sdhci_msm_set_clock clock setting will fail, so lets
use the generic sdhci_set_clock.
Signed-off-by: Robert Marko <robimarko@gmail.com>
---
drivers/mmc/host/sdhci-msm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -1710,7 +1710,7 @@ MODULE_DEVICE_TABLE(of, sdhci_msm_dt_mat
static const struct sdhci_ops sdhci_msm_ops = {
.reset = sdhci_reset,
- .set_clock = sdhci_msm_set_clock,
+ .set_clock = sdhci_set_clock,
.get_min_clock = sdhci_msm_get_min_clock,
.get_max_clock = sdhci_msm_get_max_clock,
.set_bus_width = sdhci_set_bus_width,

225
target/linux/ipq40xx/patches-4.19/700-net-add-qualcomm-mdio.patch
View File

@ -1,225 +0,0 @@
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -525,6 +525,13 @@ config XILINX_GMII2RGMII
the Reduced Gigabit Media Independent Interface(RGMII) between
Ethernet physical media devices and the Gigabit Ethernet controller.
+config MDIO_IPQ40XX
+ tristate "Qualcomm Atheros ipq40xx MDIO interface"
+ depends on HAS_IOMEM && OF
+ ---help---
+ This driver supports the MDIO interface found in Qualcomm
+ Atheros ipq40xx Soc chip.
+
endif # PHYLIB
config MICREL_KS8995MA
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium
obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o
obj-$(CONFIG_MDIO_I2C) += mdio-i2c.o
+obj-$(CONFIG_MDIO_IPQ40XX) += mdio-ipq40xx.o
obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
obj-$(CONFIG_MDIO_MSCC_MIIM) += mdio-mscc-miim.o
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
--- /dev/null
+++ b/drivers/net/phy/mdio-ipq40xx.c
@@ -0,0 +1,196 @@
+/*
+ * Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all copies.
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_mdio.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+
+#define MDIO_CTRL_0_REG 0x40
+#define MDIO_CTRL_1_REG 0x44
+#define MDIO_CTRL_2_REG 0x48
+#define MDIO_CTRL_3_REG 0x4c
+#define MDIO_CTRL_4_REG 0x50
+#define MDIO_CTRL_4_ACCESS_BUSY BIT(16)
+#define MDIO_CTRL_4_ACCESS_START BIT(8)
+#define MDIO_CTRL_4_ACCESS_CODE_READ 0
+#define MDIO_CTRL_4_ACCESS_CODE_WRITE 1
+#define CTRL_0_REG_DEFAULT_VALUE 0x150FF
+
+#define IPQ40XX_MDIO_RETRY 1000
+#define IPQ40XX_MDIO_DELAY 10
+
+struct ipq40xx_mdio_data {
+ struct mii_bus *mii_bus;
+ void __iomem *membase;
+ struct device *dev;
+};
+
+static int ipq40xx_mdio_wait_busy(struct ipq40xx_mdio_data *am)
+{
+ int i;
+
+ for (i = 0; i < IPQ40XX_MDIO_RETRY; i++) {
+ unsigned int busy;
+
+ busy = readl(am->membase + MDIO_CTRL_4_REG) &
+ MDIO_CTRL_4_ACCESS_BUSY;
+ if (!busy)
+ return 0;
+
+ /* BUSY might take to be cleard by 15~20 times of loop */
+ udelay(IPQ40XX_MDIO_DELAY);
+ }
+
+ dev_err(am->dev, "%s: MDIO operation timed out\n", am->mii_bus->name);
+
+ return -ETIMEDOUT;
+}
+
+static int ipq40xx_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+ struct ipq40xx_mdio_data *am = bus->priv;
+ int value = 0;
+ unsigned int cmd = 0;
+
+ lockdep_assert_held(&bus->mdio_lock);
+
+ if (ipq40xx_mdio_wait_busy(am))
+ return -ETIMEDOUT;
+
+ /* issue the phy address and reg */
+ writel((mii_id << 8) | regnum, am->membase + MDIO_CTRL_1_REG);
+
+ cmd = MDIO_CTRL_4_ACCESS_START|MDIO_CTRL_4_ACCESS_CODE_READ;
+
+ /* issue read command */
+ writel(cmd, am->membase + MDIO_CTRL_4_REG);
+
+ /* Wait read complete */
+ if (ipq40xx_mdio_wait_busy(am))
+ return -ETIMEDOUT;
+
+ /* Read data */
+ value = readl(am->membase + MDIO_CTRL_3_REG);
+
+ return value;
+}
+
+static int ipq40xx_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
+ u16 value)
+{
+ struct ipq40xx_mdio_data *am = bus->priv;
+ unsigned int cmd = 0;
+
+ lockdep_assert_held(&bus->mdio_lock);
+
+ if (ipq40xx_mdio_wait_busy(am))
+ return -ETIMEDOUT;
+
+ /* issue the phy address and reg */
+ writel((mii_id << 8) | regnum, am->membase + MDIO_CTRL_1_REG);
+
+ /* issue write data */
+ writel(value, am->membase + MDIO_CTRL_2_REG);
+
+ cmd = MDIO_CTRL_4_ACCESS_START|MDIO_CTRL_4_ACCESS_CODE_WRITE;
+ /* issue write command */
+ writel(cmd, am->membase + MDIO_CTRL_4_REG);
+
+ /* Wait write complete */
+ if (ipq40xx_mdio_wait_busy(am))
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int ipq40xx_mdio_probe(struct platform_device *pdev)
+{
+ struct ipq40xx_mdio_data *am;
+ struct resource *res;
+ int i;
+
+ am = devm_kzalloc(&pdev->dev, sizeof(*am), GFP_KERNEL);
+ if (!am)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "no iomem resource found\n");
+ return -ENXIO;
+ }
+
+ am->membase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(am->membase)) {
+ dev_err(&pdev->dev, "unable to ioremap registers\n");
+ return PTR_ERR(am->membase);
+ }
+
+ am->mii_bus = devm_mdiobus_alloc(&pdev->dev);
+ if (!am->mii_bus)
+ return -ENOMEM;
+
+ writel(CTRL_0_REG_DEFAULT_VALUE, am->membase + MDIO_CTRL_0_REG);
+
+ am->mii_bus->name = "ipq40xx_mdio";
+ am->mii_bus->read = ipq40xx_mdio_read;
+ am->mii_bus->write = ipq40xx_mdio_write;
+ am->mii_bus->priv = am;
+ am->mii_bus->parent = &pdev->dev;
+ snprintf(am->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev_name(&pdev->dev));
+
+ am->dev = &pdev->dev;
+ platform_set_drvdata(pdev, am);
+
+ return of_mdiobus_register(am->mii_bus, pdev->dev.of_node);
+}
+
+static int ipq40xx_mdio_remove(struct platform_device *pdev)
+{
+ struct ipq40xx_mdio_data *am = platform_get_drvdata(pdev);
+
+ mdiobus_unregister(am->mii_bus);
+
+ return 0;
+}
+
+static const struct of_device_id ipq40xx_mdio_dt_ids[] = {
+ { .compatible = "qcom,ipq4019-mdio" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ipq40xx_mdio_dt_ids);
+
+static struct platform_driver ipq40xx_mdio_driver = {
+ .probe = ipq40xx_mdio_probe,
+ .remove = ipq40xx_mdio_remove,
+ .driver = {
+ .name = "ipq40xx-mdio",
+ .of_match_table = ipq40xx_mdio_dt_ids,
+ },
+};
+
+module_platform_driver(ipq40xx_mdio_driver);
+
+#define DRV_VERSION "1.0"
+
+MODULE_DESCRIPTION("IPQ40XX MDIO interface driver");
+MODULE_AUTHOR("Qualcomm Atheros");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("Dual BSD/GPL");

52
target/linux/ipq40xx/patches-4.19/701-dts-ipq4019-add-mdio-node.patch
View File

@ -1,52 +0,0 @@
From 09ed737593f71bcca08a537a6c15264a1a6add08 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@gmail.com>
Date: Sun, 20 Nov 2016 01:10:33 +0100
Subject: [PATCH] dts: ipq4019: add mdio node for ethernet
This patch adds the mdio device-tree node.
This is where the switch is connected to, so it's needed
for the ethernet interfaces.
Note: The driver isn't anywhere close to be upstream,
so the info might change.
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -593,6 +593,34 @@
status = "disabled";
};
+ mdio: mdio@90000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "qcom,ipq4019-mdio";
+ reg = <0x90000 0x64>;
+ status = "disabled";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ ethphy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ ethphy3: ethernet-phy@3 {
+ reg = <3>;
+ };
+
+ ethphy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+ };
+
usb3_ss_phy: ssphy@9a000 {
compatible = "qcom,usb-ss-ipq4019-phy";
#phy-cells = <0>;

46
target/linux/ipq40xx/patches-4.19/702-dts-ipq4019-add-PHY-switch-nodes.patch
View File

@ -1,46 +0,0 @@
From 9deeec35dd3b628b95624e41d4e04acf728991ba Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@gmail.com>
Date: Sun, 20 Nov 2016 02:20:54 +0100
Subject: [PATCH] dts: ipq4019: add PHY/switch nodes
This patch adds both the "qcom,ess-switch" and "qcom,ess-psgmii"
nodes which are needed for the ar40xx.c driver to initialize the
switch.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -621,6 +621,29 @@
};
};
+ ess-switch@c000000 {
+ compatible = "qcom,ess-switch";
+ reg = <0xc000000 0x80000>;
+ switch_access_mode = "local bus";
+ resets = <&gcc ESS_RESET>;
+ reset-names = "ess_rst";
+ clocks = <&gcc GCC_ESS_CLK>;
+ clock-names = "ess_clk";
+ switch_cpu_bmp = <0x1>;
+ switch_lan_bmp = <0x1e>;
+ switch_wan_bmp = <0x20>;
+ switch_mac_mode = <0>; /* PORT_WRAPPER_PSGMII */
+ switch_initvlas = <0x7c 0x54>;
+ status = "disabled";
+ };
+
+ ess-psgmii@98000 {
+ compatible = "qcom,ess-psgmii";
+ reg = <0x98000 0x800>;
+ psgmii_access_mode = "local bus";
+ status = "disabled";
+ };
+
usb3_ss_phy: ssphy@9a000 {
compatible = "qcom,usb-ss-ipq4019-phy";
#phy-cells = <0>;

53
target/linux/ipq40xx/patches-4.19/703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch
View File

@ -1,53 +0,0 @@
From 7c129254adb1093d10a62ed7bf7b956fcc6ffe34 Mon Sep 17 00:00:00 2001
From: Rakesh Nair <ranair@codeaurora.org>
Date: Wed, 20 Jul 2016 15:02:01 +0530
Subject: [PATCH] net: IPQ4019 needs rfs/vlan_tag callbacks in
netdev_ops
Add callback support to get default vlan tag and register
receive flow steering filter.
Used by IPQ4019 ess-edma driver.
BUG=chrome-os-partner:33096
TEST=none
Change-Id: I266070e4a0fbe4a0d9966fe79a71e50ec4f26c75
Signed-off-by: Rakesh Nair <ranair@codeaurora.org>
Reviewed-on: https://chromium-review.googlesource.com/362203
Commit-Ready: Grant Grundler <grundler@chromium.org>
Tested-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
---
include/linux/netdevice.h | 13 +++++++++++++
1 file changed, 13 insertions(+)
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -742,6 +742,16 @@ struct xps_map {
#define XPS_MIN_MAP_ALLOC ((L1_CACHE_ALIGN(offsetof(struct xps_map, queues[1])) \
- sizeof(struct xps_map)) / sizeof(u16))
+#ifdef CONFIG_RFS_ACCEL
+typedef int (*set_rfs_filter_callback_t)(struct net_device *dev,
+ __be32 src,
+ __be32 dst,
+ __be16 sport,
+ __be16 dport,
+ u8 proto,
+ u16 rxq_index,
+ u32 action);
+#endif
/*
* This structure holds all XPS maps for device. Maps are indexed by CPU.
*/
@@ -1356,6 +1366,9 @@ struct net_device_ops {
const struct sk_buff *skb,
u16 rxq_index,
u32 flow_id);
+ int (*ndo_register_rfs_filter)(struct net_device *dev,
+ set_rfs_filter_callback_t set_filter);
+ int (*ndo_get_default_vlan_tag)(struct net_device *net);
#endif
int (*ndo_add_slave)(struct net_device *dev,
struct net_device *slave_dev,

2491
target/linux/ipq40xx/patches-4.19/705-net-add-qualcomm-ar40xx-phy.patch
View File

File diff suppressed because it is too large Load Diff

23
target/linux/ipq40xx/patches-4.19/706-ar40xx-abort-probe-on-missig-phy.patch
View File

@ -1,23 +0,0 @@
--- a/drivers/net/phy/ar40xx.c
+++ b/drivers/net/phy/ar40xx.c
@@ -2054,6 +2054,12 @@ static int ar40xx_probe(struct platform_
/* register switch */
swdev = &priv->dev;
+ if (priv->mii_bus == NULL) {
+ dev_err(&pdev->dev, "Probe failed - Missing PHYs!\n");
+ ret = -ENODEV;
+ goto err_missing_phy;
+ }
+
swdev->alias = dev_name(&priv->mii_bus->dev);
swdev->cpu_port = AR40XX_PORT_CPU;
@@ -2085,6 +2091,7 @@ err_unregister_switch:
unregister_switch(&priv->dev);
err_unregister_phy:
phy_driver_unregister(&ar40xx_phy_driver);
+err_missing_phy:
platform_set_drvdata(pdev, NULL);
return ret;
}

4575
target/linux/ipq40xx/patches-4.19/710-net-add-qualcomm-essedma-ethernet-driver.patch
View File

File diff suppressed because it is too large Load Diff

92
target/linux/ipq40xx/patches-4.19/711-dts-ipq4019-add-ethernet-essedma-node.patch
View File

@ -1,92 +0,0 @@
From c611d3780fa101662a822d10acf8feb04ca97409 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@gmail.com>
Date: Sun, 20 Nov 2016 01:01:10 +0100
Subject: [PATCH] dts: ipq4019: add ethernet essedma node
This patch adds the device-tree node for the ethernet
interfaces.
Note: The driver isn't anywhere close to be upstream,
so the info might change.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 60 +++++++++++++++++++++++++++++++++++++
1 file changed, 60 insertions(+)
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -44,6 +44,8 @@
spi1 = &blsp1_spi2;
i2c0 = &blsp1_i2c3;
i2c1 = &blsp1_i2c4;
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
};
cpus {
@@ -644,6 +646,64 @@
status = "disabled";
};
+ edma@c080000 {
+ compatible = "qcom,ess-edma";
+ reg = <0xc080000 0x8000>;
+ qcom,page-mode = <0>;
+ qcom,rx_head_buf_size = <1540>;
+ qcom,mdio_supported;
+ qcom,poll_required = <1>;
+ qcom,num_gmac = <2>;
+ interrupts = <0 65 IRQ_TYPE_EDGE_RISING
+ 0 66 IRQ_TYPE_EDGE_RISING
+ 0 67 IRQ_TYPE_EDGE_RISING
+ 0 68 IRQ_TYPE_EDGE_RISING
+ 0 69 IRQ_TYPE_EDGE_RISING
+ 0 70 IRQ_TYPE_EDGE_RISING
+ 0 71 IRQ_TYPE_EDGE_RISING
+ 0 72 IRQ_TYPE_EDGE_RISING
+ 0 73 IRQ_TYPE_EDGE_RISING
+ 0 74 IRQ_TYPE_EDGE_RISING
+ 0 75 IRQ_TYPE_EDGE_RISING
+ 0 76 IRQ_TYPE_EDGE_RISING
+ 0 77 IRQ_TYPE_EDGE_RISING
+ 0 78 IRQ_TYPE_EDGE_RISING
+ 0 79 IRQ_TYPE_EDGE_RISING
+ 0 80 IRQ_TYPE_EDGE_RISING
+ 0 240 IRQ_TYPE_EDGE_RISING
+ 0 241 IRQ_TYPE_EDGE_RISING
+ 0 242 IRQ_TYPE_EDGE_RISING
+ 0 243 IRQ_TYPE_EDGE_RISING
+ 0 244 IRQ_TYPE_EDGE_RISING
+ 0 245 IRQ_TYPE_EDGE_RISING
+ 0 246 IRQ_TYPE_EDGE_RISING
+ 0 247 IRQ_TYPE_EDGE_RISING
+ 0 248 IRQ_TYPE_EDGE_RISING
+ 0 249 IRQ_TYPE_EDGE_RISING
+ 0 250 IRQ_TYPE_EDGE_RISING
+ 0 251 IRQ_TYPE_EDGE_RISING
+ 0 252 IRQ_TYPE_EDGE_RISING
+ 0 253 IRQ_TYPE_EDGE_RISING
+ 0 254 IRQ_TYPE_EDGE_RISING
+ 0 255 IRQ_TYPE_EDGE_RISING>;
+
+ status = "disabled";
+
+ gmac0: gmac0 {
+ local-mac-address = [00 00 00 00 00 00];
+ vlan_tag = <1 0x1f>;
+ };
+
+ gmac1: gmac1 {
+ local-mac-address = [00 00 00 00 00 00];
+ qcom,phy_mdio_addr = <4>;
+ qcom,poll_required = <1>;
+ qcom,forced_speed = <1000>;
+ qcom,forced_duplex = <1>;
+ vlan_tag = <2 0x20>;
+ };
+ };
+
usb3_ss_phy: ssphy@9a000 {
compatible = "qcom,usb-ss-ipq4019-phy";
#phy-cells = <0>;

334
target/linux/ipq40xx/patches-4.19/712-mr33-essedma.patch
View File

@ -1,334 +0,0 @@
--- a/drivers/net/ethernet/qualcomm/essedma/edma.c
+++ b/drivers/net/ethernet/qualcomm/essedma/edma.c
@@ -161,8 +161,10 @@ static void edma_configure_rx(struct edm
/* Set Rx FIFO threshold to start to DMA data to host */
rxq_ctrl_data = EDMA_FIFO_THRESH_128_BYTE;
+ if (!edma_cinfo->is_single_phy) {
/* Set RX remove vlan bit */
rxq_ctrl_data |= EDMA_RXQ_CTRL_RMV_VLAN;
+ }
edma_write_reg(EDMA_REG_RXQ_CTRL, rxq_ctrl_data);
}
@@ -1293,6 +1295,10 @@ void edma_adjust_link(struct net_device
if (status == __EDMA_LINKUP && adapter->link_state == __EDMA_LINKDOWN) {
dev_info(&adapter->pdev->dev, "%s: GMAC Link is up with phy_speed=%d\n", netdev->name, phydev->speed);
adapter->link_state = __EDMA_LINKUP;
+ if (adapter->edma_cinfo->is_single_phy) {
+ ess_set_port_status_speed(adapter->edma_cinfo, phydev,
+ ffs(adapter->dp_bitmap) - 1);
+ }
netif_carrier_on(netdev);
if (netif_running(netdev))
netif_tx_wake_all_queues(netdev);
@@ -1386,10 +1392,12 @@ netdev_tx_t edma_xmit(struct sk_buff *sk
}
/* Check and mark VLAN tag offload */
- if (skb_vlan_tag_present(skb))
- flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_FLAG;
- else if (adapter->default_vlan_tag)
- flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG;
+ if (!adapter->edma_cinfo->is_single_phy) {
+ if (unlikely(skb_vlan_tag_present(skb)))
+ flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_FLAG;
+ else if (adapter->default_vlan_tag)
+ flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG;
+ }
/* Check and mark checksum offload */
if (likely(skb->ip_summed == CHECKSUM_PARTIAL))
--- a/drivers/net/ethernet/qualcomm/essedma/edma.h
+++ b/drivers/net/ethernet/qualcomm/essedma/edma.h
@@ -31,6 +31,7 @@
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/sysctl.h>
@@ -332,6 +333,9 @@ struct edma_common_info {
struct edma_per_cpu_queues_info edma_percpu_info[CONFIG_NR_CPUS]; /* per cpu information */
spinlock_t stats_lock; /* protect edma stats area for updation */
struct timer_list edma_stats_timer;
+ bool is_single_phy;
+ void __iomem *ess_hw_addr;
+ struct clk *ess_clk;
};
/* transimit packet descriptor (tpd) ring */
@@ -444,4 +448,6 @@ void edma_change_tx_coalesce(int usecs);
void edma_change_rx_coalesce(int usecs);
void edma_get_tx_rx_coalesce(u32 *reg_val);
void edma_clear_irq_status(void);
+void ess_set_port_status_speed(struct edma_common_info *edma_cinfo,
+ struct phy_device *phydev, uint8_t port_id);
#endif /* _EDMA_H_ */
--- a/drivers/net/ethernet/qualcomm/essedma/edma_axi.c
+++ b/drivers/net/ethernet/qualcomm/essedma/edma_axi.c
@@ -17,6 +17,11 @@
#include <linux/of.h>
#include <linux/of_net.h>
#include <linux/timer.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/clk.h>
+#include <linux/string.h>
+#include <linux/reset.h>
#include "edma.h"
#include "ess_edma.h"
@@ -81,6 +86,101 @@ void edma_read_reg(u16 reg_addr, volatil
*reg_value = readl((void __iomem *)(edma_hw_addr + reg_addr));
}
+static void ess_write_reg(struct edma_common_info *edma, u16 reg_addr, u32 reg_value)
+{
+ writel(reg_value, ((void __iomem *)
+ ((unsigned long)edma->ess_hw_addr + reg_addr)));
+}
+
+static void ess_read_reg(struct edma_common_info *edma, u16 reg_addr,
+ volatile u32 *reg_value)
+{
+ *reg_value = readl((void __iomem *)
+ ((unsigned long)edma->ess_hw_addr + reg_addr));
+}
+
+static int ess_reset(struct edma_common_info *edma)
+{
+ struct device_node *switch_node = NULL;
+ struct reset_control *ess_rst;
+ u32 regval;
+
+ switch_node = of_find_node_by_name(NULL, "ess-switch");
+ if (!switch_node) {
+ pr_err("switch-node not found\n");
+ return -EINVAL;
+ }
+
+ ess_rst = of_reset_control_get(switch_node, "ess_rst");
+ of_node_put(switch_node);
+
+ if (IS_ERR(ess_rst)) {
+ pr_err("failed to find ess_rst!\n");
+ return -ENOENT;
+ }
+
+ reset_control_assert(ess_rst);
+ msleep(10);
+ reset_control_deassert(ess_rst);
+ msleep(100);
+ reset_control_put(ess_rst);
+
+ /* Enable only port 5 <--> port 0
+ * bits 0:6 bitmap of ports it can fwd to */
+#define SET_PORT_BMP(r,v) \
+ ess_read_reg(edma, r, &regval); \
+ ess_write_reg(edma, r, ((regval & ~0x3F) | v));
+
+ SET_PORT_BMP(ESS_PORT0_LOOKUP_CTRL,0x20);
+ SET_PORT_BMP(ESS_PORT1_LOOKUP_CTRL,0x00);
+ SET_PORT_BMP(ESS_PORT2_LOOKUP_CTRL,0x00);
+ SET_PORT_BMP(ESS_PORT3_LOOKUP_CTRL,0x00);
+ SET_PORT_BMP(ESS_PORT4_LOOKUP_CTRL,0x00);
+ SET_PORT_BMP(ESS_PORT5_LOOKUP_CTRL,0x01);
+ ess_write_reg(edma, ESS_RGMII_CTRL, 0x400);
+ ess_write_reg(edma, ESS_PORT0_STATUS, ESS_PORT_1G_FDX);
+ ess_write_reg(edma, ESS_PORT5_STATUS, ESS_PORT_1G_FDX);
+ ess_write_reg(edma, ESS_PORT0_HEADER_CTRL, 0);
+#undef SET_PORT_BMP
+
+ /* forward multicast and broadcast frames to CPU */
+ ess_write_reg(edma, ESS_FWD_CTRL1,
+ (ESS_PORTS_ALL << ESS_FWD_CTRL1_UC_FLOOD_S) |
+ (ESS_PORTS_ALL << ESS_FWD_CTRL1_MC_FLOOD_S) |
+ (ESS_PORTS_ALL << ESS_FWD_CTRL1_BC_FLOOD_S));
+
+ return 0;
+}
+
+void ess_set_port_status_speed(struct edma_common_info *edma,
+ struct phy_device *phydev, uint8_t port_id)
+{
+ uint16_t reg_off = ESS_PORT0_STATUS + (4 * port_id);
+ uint32_t reg_val = 0;
+
+ ess_read_reg(edma, reg_off, &reg_val);
+
+ /* reset the speed bits [0:1] */
+ reg_val &= ~ESS_PORT_STATUS_SPEED_INV;
+
+ /* set the new speed */
+ switch(phydev->speed) {
+ case SPEED_1000: reg_val |= ESS_PORT_STATUS_SPEED_1000; break;
+ case SPEED_100: reg_val |= ESS_PORT_STATUS_SPEED_100; break;
+ case SPEED_10: reg_val |= ESS_PORT_STATUS_SPEED_10; break;
+ default: reg_val |= ESS_PORT_STATUS_SPEED_INV; break;
+ }
+
+ /* check full/half duplex */
+ if (phydev->duplex) {
+ reg_val |= ESS_PORT_STATUS_DUPLEX_MODE;
+ } else {
+ reg_val &= ~ESS_PORT_STATUS_DUPLEX_MODE;
+ }
+
+ ess_write_reg(edma, reg_off, reg_val);
+}
+
/* edma_change_tx_coalesce()
* change tx interrupt moderation timer
*/
@@ -550,6 +650,31 @@ static struct ctl_table edma_table[] = {
{}
};
+static int ess_parse(struct edma_common_info *edma)
+{
+ struct device_node *switch_node;
+ int ret = -EINVAL;
+
+ switch_node = of_find_node_by_name(NULL, "ess-switch");
+ if (!switch_node) {
+ pr_err("cannot find ess-switch node\n");
+ goto out;
+ }
+
+ edma->ess_hw_addr = of_io_request_and_map(switch_node,
+ 0, KBUILD_MODNAME);
+ if (!edma->ess_hw_addr) {
+ pr_err("%s ioremap fail.", __func__);
+ goto out;
+ }
+
+ edma->ess_clk = of_clk_get_by_name(switch_node, "ess_clk");
+ ret = clk_prepare_enable(edma->ess_clk);
+out:
+ of_node_put(switch_node);
+ return ret;
+}
+
/* edma_axi_netdev_ops
* Describe the operations supported by registered netdevices
*
@@ -785,6 +910,17 @@ static int edma_axi_probe(struct platfor
miibus = mdio_data->mii_bus;
}
+ if (of_property_read_bool(np, "qcom,single-phy") &&
+ edma_cinfo->num_gmac == 1) {
+ err = ess_parse(edma_cinfo);
+ if (!err)
+ err = ess_reset(edma_cinfo);
+ if (err)
+ goto err_single_phy_init;
+ else
+ edma_cinfo->is_single_phy = true;
+ }
+
for_each_available_child_of_node(np, pnp) {
const char *mac_addr;
@@ -1073,11 +1209,15 @@ static int edma_axi_probe(struct platfor
for (i = 0; i < edma_cinfo->num_gmac; i++) {
if (adapter[i]->poll_required) {
+ int phy_mode = of_get_phy_mode(np);
+
+ if (phy_mode < 0)
+ phy_mode = PHY_INTERFACE_MODE_SGMII;
adapter[i]->phydev =
phy_connect(edma_netdev[i],
(const char *)adapter[i]->phy_id,
&edma_adjust_link,
- PHY_INTERFACE_MODE_SGMII);
+ phy_mode);
if (IS_ERR(adapter[i]->phydev)) {
dev_dbg(&pdev->dev, "PHY attach FAIL");
err = -EIO;
@@ -1121,6 +1261,9 @@ err_rmap_alloc_fail:
for (i = 0; i < edma_cinfo->num_gmac; i++)
unregister_netdev(edma_netdev[i]);
err_register:
+err_single_phy_init:
+ iounmap(edma_cinfo->ess_hw_addr);
+ clk_disable_unprepare(edma_cinfo->ess_clk);
err_mdiobus_init_fail:
edma_free_rx_rings(edma_cinfo);
err_rx_rinit:
@@ -1181,6 +1324,8 @@ static int edma_axi_remove(struct platfo
del_timer_sync(&edma_cinfo->edma_stats_timer);
edma_free_irqs(adapter);
unregister_net_sysctl_table(edma_cinfo->edma_ctl_table_hdr);
+ iounmap(edma_cinfo->ess_hw_addr);
+ clk_disable_unprepare(edma_cinfo->ess_clk);
edma_free_tx_resources(edma_cinfo);
edma_free_rx_resources(edma_cinfo);
edma_free_tx_rings(edma_cinfo);
--- a/drivers/net/ethernet/qualcomm/essedma/ess_edma.h
+++ b/drivers/net/ethernet/qualcomm/essedma/ess_edma.h
@@ -329,4 +329,61 @@ struct edma_hw;
#define EDMA_RRD_PRIORITY_MASK 0x7
#define EDMA_RRD_PORT_TYPE_SHIFT 7
#define EDMA_RRD_PORT_TYPE_MASK 0x1F
+
+#define ESS_RGMII_CTRL 0x0004
+
+/* Port status registers */
+#define ESS_PORT0_STATUS 0x007C
+#define ESS_PORT1_STATUS 0x0080
+#define ESS_PORT2_STATUS 0x0084
+#define ESS_PORT3_STATUS 0x0088
+#define ESS_PORT4_STATUS 0x008C
+#define ESS_PORT5_STATUS 0x0090
+
+#define ESS_PORT_STATUS_HDX_FLOW_CTL 0x80
+#define ESS_PORT_STATUS_DUPLEX_MODE 0x40
+#define ESS_PORT_STATUS_RX_FLOW_EN 0x20
+#define ESS_PORT_STATUS_TX_FLOW_EN 0x10
+#define ESS_PORT_STATUS_RX_MAC_EN 0x08
+#define ESS_PORT_STATUS_TX_MAC_EN 0x04
+#define ESS_PORT_STATUS_SPEED_INV 0x03
+#define ESS_PORT_STATUS_SPEED_1000 0x02
+#define ESS_PORT_STATUS_SPEED_100 0x01
+#define ESS_PORT_STATUS_SPEED_10 0x00
+
+#define ESS_PORT_1G_FDX (ESS_PORT_STATUS_DUPLEX_MODE | ESS_PORT_STATUS_RX_FLOW_EN | \
+ ESS_PORT_STATUS_TX_FLOW_EN | ESS_PORT_STATUS_RX_MAC_EN | \
+ ESS_PORT_STATUS_TX_MAC_EN | ESS_PORT_STATUS_SPEED_1000)
+
+#define PHY_STATUS_REG 0x11
+#define PHY_STATUS_SPEED 0xC000
+#define PHY_STATUS_SPEED_SHIFT 14
+#define PHY_STATUS_DUPLEX 0x2000
+#define PHY_STATUS_DUPLEX_SHIFT 13
+#define PHY_STATUS_SPEED_DUPLEX_RESOLVED 0x0800
+#define PHY_STATUS_CARRIER 0x0400
+#define PHY_STATUS_CARRIER_SHIFT 10
+
+/* Port lookup control registers */
+#define ESS_PORT0_LOOKUP_CTRL 0x0660
+#define ESS_PORT1_LOOKUP_CTRL 0x066C
+#define ESS_PORT2_LOOKUP_CTRL 0x0678
+#define ESS_PORT3_LOOKUP_CTRL 0x0684
+#define ESS_PORT4_LOOKUP_CTRL 0x0690
+#define ESS_PORT5_LOOKUP_CTRL 0x069C
+
+#define ESS_PORT0_HEADER_CTRL 0x009C
+
+#define ESS_PORTS_ALL 0x3f
+
+#define ESS_FWD_CTRL1 0x0624
+#define ESS_FWD_CTRL1_UC_FLOOD BITS(0, 7)
+#define ESS_FWD_CTRL1_UC_FLOOD_S 0
+#define ESS_FWD_CTRL1_MC_FLOOD BITS(8, 7)
+#define ESS_FWD_CTRL1_MC_FLOOD_S 8
+#define ESS_FWD_CTRL1_BC_FLOOD BITS(16, 7)
+#define ESS_FWD_CTRL1_BC_FLOOD_S 16
+#define ESS_FWD_CTRL1_IGMP BITS(24, 7)
+#define ESS_FWD_CTRL1_IGMP_S 24
+
#endif /* _ESS_EDMA_H_ */

21
target/linux/ipq40xx/patches-4.19/713-essedma-alloc-skb-ip-align.patch
View File

@ -1,21 +0,0 @@
From 17681f0bb474d0d227f07369144149d1555d8bce Mon Sep 17 00:00:00 2001
From: Chen Minqiang <ptpt52@gmail.com>
Date: Sun, 17 Jun 2018 04:14:13 +0800
Subject: [PATCH] essedma: alloc skb ip align
Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
---
drivers/net/ethernet/qualcomm/essedma/edma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/qualcomm/essedma/edma.c
+++ b/drivers/net/ethernet/qualcomm/essedma/edma.c
@@ -201,7 +201,7 @@ static int edma_alloc_rx_buf(struct edma
skb = sw_desc->skb;
} else {
/* alloc skb */
- skb = netdev_alloc_skb(edma_netdev[0], length);
+ skb = netdev_alloc_skb_ip_align(edma_netdev[0], length);
if (!skb) {
/* Better luck next round */
break;

197
target/linux/ipq40xx/patches-4.19/714-essedma-add-fix-for-memory-allocation.patch
View File

@ -1,197 +0,0 @@
From 72c050acbc425ef99313d5c2e4c866e25567e569 Mon Sep 17 00:00:00 2001
From: Rakesh Nair <ranair@codeaurora.org>
Date: Thu, 8 Jun 2017 14:29:20 +0530
Subject: [PATCH] CHROMIUM: net: qualcomm: Add fix for memory allocation issues
Added ethtool counters for memory allocation failures accounting.
Added support to track number of allocation failures that could
not be fulfilled in the current iteration in the rx descriptor
field and use the info to allocate in the subsequent iteration.
Change-Id: Ie4fd3b6cf25304e5db2c9247a498791e7e9bb4aa
Signed-off-by: Rakesh Nair <ranair@codeaurora.org>
Signed-off-by: Kan Yan <kyan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/535419
Reviewed-by: Grant Grundler <grundler@chromium.org>
---
drivers/net/ethernet/qualcomm/essedma/edma.c | 54 ++++++++++++++-----
drivers/net/ethernet/qualcomm/essedma/edma.h | 2 +
.../ethernet/qualcomm/essedma/edma_ethtool.c | 1 +
3 files changed, 43 insertions(+), 14 deletions(-)
--- a/drivers/net/ethernet/qualcomm/essedma/edma.c
+++ b/drivers/net/ethernet/qualcomm/essedma/edma.c
@@ -103,6 +103,9 @@ static int edma_alloc_rx_ring(struct edm
return -ENOMEM;
}
+ /* Initialize pending_fill */
+ erxd->pending_fill = 0;
+
return 0;
}
@@ -185,11 +188,8 @@ static int edma_alloc_rx_buf(struct edma
u16 prod_idx, length;
u32 reg_data;
- if (cleaned_count > erdr->count) {
- dev_err(&pdev->dev, "Incorrect cleaned_count %d",
- cleaned_count);
- return -1;
- }
+ if (cleaned_count > erdr->count)
+ cleaned_count = erdr->count - 1;
i = erdr->sw_next_to_fill;
@@ -199,6 +199,9 @@ static int edma_alloc_rx_buf(struct edma
if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_REUSE) {
skb = sw_desc->skb;
+
+ /* Clear REUSE Flag */
+ sw_desc->flags &= ~EDMA_SW_DESC_FLAG_SKB_REUSE;
} else {
/* alloc skb */
skb = netdev_alloc_skb_ip_align(edma_netdev[0], length);
@@ -264,6 +267,13 @@ static int edma_alloc_rx_buf(struct edma
reg_data &= ~EDMA_RFD_PROD_IDX_BITS;
reg_data |= prod_idx;
edma_write_reg(EDMA_REG_RFD_IDX_Q(queue_id), reg_data);
+
+ /* If we couldn't allocate all the buffers
+ * we increment the alloc failure counters
+ */
+ if (cleaned_count)
+ edma_cinfo->edma_ethstats.rx_alloc_fail_ctr++;
+
return cleaned_count;
}
@@ -534,7 +544,7 @@ static int edma_rx_complete_paged(struct
* edma_rx_complete()
* Main api called from the poll function to process rx packets.
*/
-static void edma_rx_complete(struct edma_common_info *edma_cinfo,
+static u16 edma_rx_complete(struct edma_common_info *edma_cinfo,
int *work_done, int work_to_do, int queue_id,
struct napi_struct *napi)
{
@@ -554,6 +564,7 @@ static void edma_rx_complete(struct edma
u16 count = erdr->count, rfd_avail;
u8 queue_to_rxid[8] = {0, 0, 1, 1, 2, 2, 3, 3};
+ cleaned_count = erdr->pending_fill;
sw_next_to_clean = erdr->sw_next_to_clean;
edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data);
@@ -652,12 +663,13 @@ static void edma_rx_complete(struct edma
(*work_done)++;
drop_count = 0;
}
- if (cleaned_count == EDMA_RX_BUFFER_WRITE) {
+ if (cleaned_count >= EDMA_RX_BUFFER_WRITE) {
/* If buffer clean count reaches 16, we replenish HW buffers. */
ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
sw_next_to_clean);
cleaned_count = ret_count;
+ erdr->pending_fill = ret_count;
}
continue;
}
@@ -730,11 +742,12 @@ static void edma_rx_complete(struct edma
adapter->stats.rx_bytes += length;
/* Check if we reached refill threshold */
- if (cleaned_count == EDMA_RX_BUFFER_WRITE) {
+ if (cleaned_count >= EDMA_RX_BUFFER_WRITE) {
ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
sw_next_to_clean);
cleaned_count = ret_count;
+ erdr->pending_fill = ret_count;
}
/* At this point skb should go to stack */
@@ -756,11 +769,17 @@ static void edma_rx_complete(struct edma
/* Refill here in case refill threshold wasn't reached */
if (likely(cleaned_count)) {
ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
- if (ret_count)
- dev_dbg(&pdev->dev, "Not all buffers was reallocated");
+ erdr->pending_fill = ret_count;
+ if (ret_count) {
+ if (net_ratelimit())
+ dev_dbg(&pdev->dev, "Not all buffers was reallocated");
+ }
+
edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
erdr->sw_next_to_clean);
}
+
+ return erdr->pending_fill;
}
/* edma_delete_rfs_filter()
@@ -2064,6 +2083,7 @@ int edma_poll(struct napi_struct *napi,
u32 shadow_rx_status, shadow_tx_status;
int queue_id;
int i, work_done = 0;
+ u16 rx_pending_fill;
/* Store the Rx/Tx status by ANDing it with
* appropriate CPU RX?TX mask
@@ -2097,13 +2117,19 @@ int edma_poll(struct napi_struct *napi,
*/
while (edma_percpu_info->rx_status) {
queue_id = ffs(edma_percpu_info->rx_status) - 1;
- edma_rx_complete(edma_cinfo, &work_done,
- budget, queue_id, napi);
+ rx_pending_fill = edma_rx_complete(edma_cinfo, &work_done,
+ budget, queue_id, napi);
- if (likely(work_done < budget))
+ if (likely(work_done < budget)) {
+ if (rx_pending_fill) {
+ /* reschedule poll() to refill rx buffer deficit */
+ work_done = budget;
+ break;
+ }
edma_percpu_info->rx_status &= ~(1 << queue_id);
- else
+ } else {
break;
+ }
}
/* Clear the status register, to avoid the interrupts to
--- a/drivers/net/ethernet/qualcomm/essedma/edma.h
+++ b/drivers/net/ethernet/qualcomm/essedma/edma.h
@@ -225,6 +225,7 @@ struct edma_ethtool_statistics {
u32 rx_q6_byte;
u32 rx_q7_byte;
u32 tx_desc_error;
+ u32 rx_alloc_fail_ctr;
};
struct edma_mdio_data {
@@ -362,6 +363,7 @@ struct edma_rfd_desc_ring {
dma_addr_t dma; /* descriptor ring physical address */
u16 sw_next_to_fill; /* next descriptor to fill */
u16 sw_next_to_clean; /* next descriptor to clean */
+ u16 pending_fill; /* fill pending from previous iteration */
};
/* edma_rfs_flter_node - rfs filter node in hash table */
--- a/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c
+++ b/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c
@@ -78,6 +78,7 @@ static const struct edma_ethtool_stats e
{"rx_q6_byte", EDMA_STAT(rx_q6_byte)},
{"rx_q7_byte", EDMA_STAT(rx_q7_byte)},
{"tx_desc_error", EDMA_STAT(tx_desc_error)},
+ {"rx_alloc_fail_ctr", EDMA_STAT(rx_alloc_fail_ctr)},
};
#define EDMA_STATS_LEN ARRAY_SIZE(edma_gstrings_stats)

199
target/linux/ipq40xx/patches-4.19/715-essedma-refine-txq-to-be-adaptive-of-cpus-and-netdev.patch
View File

@ -1,199 +0,0 @@
--- a/drivers/net/ethernet/qualcomm/essedma/edma.c
+++ b/drivers/net/ethernet/qualcomm/essedma/edma.c
@@ -22,14 +22,6 @@ extern struct net_device *edma_netdev[ED
bool edma_stp_rstp;
u16 edma_ath_eth_type;
-/* edma_skb_priority_offset()
- * get edma skb priority
- */
-static unsigned int edma_skb_priority_offset(struct sk_buff *skb)
-{
- return (skb->priority >> 2) & 1;
-}
-
/* edma_alloc_tx_ring()
* Allocate Tx descriptors ring
*/
@@ -1016,13 +1008,14 @@ static inline u16 edma_tpd_available(str
/* edma_tx_queue_get()
* Get the starting number of the queue
*/
-static inline int edma_tx_queue_get(struct edma_adapter *adapter,
+static inline int edma_tx_queue_get(struct edma_common_info *edma_cinfo, struct edma_adapter *adapter,
struct sk_buff *skb, int txq_id)
{
/* skb->priority is used as an index to skb priority table
* and based on packet priority, correspong queue is assigned.
+ * FIXME we just simple use jiffies for time base balance
*/
- return adapter->tx_start_offset[txq_id] + edma_skb_priority_offset(skb);
+ return adapter->tx_start_offset[txq_id] + (smp_processor_id() % edma_cinfo->num_txq_per_core_netdev);
}
/* edma_tx_update_hw_idx()
@@ -1391,8 +1384,9 @@ netdev_tx_t edma_xmit(struct sk_buff *sk
}
/* this will be one of the 4 TX queues exposed to linux kernel */
- txq_id = skb_get_queue_mapping(skb);
- queue_id = edma_tx_queue_get(adapter, skb, txq_id);
+ /* XXX what if num_online_cpus() > EDMA_CPU_CORES_SUPPORTED */
+ txq_id = ((jiffies >> 5) % (EDMA_CPU_CORES_SUPPORTED - 1) + smp_processor_id() + 1) % EDMA_CPU_CORES_SUPPORTED;
+ queue_id = edma_tx_queue_get(edma_cinfo, adapter, skb, txq_id);
etdr = edma_cinfo->tpd_ring[queue_id];
nq = netdev_get_tx_queue(net_dev, txq_id);
@@ -1875,8 +1869,8 @@ void edma_free_irqs(struct edma_adapter
int i, j;
int k = ((edma_cinfo->num_rx_queues == 4) ? 1 : 2);
- for (i = 0; i < CONFIG_NR_CPUS; i++) {
- for (j = edma_cinfo->edma_percpu_info[i].tx_start; j < (edma_cinfo->edma_percpu_info[i].tx_start + 4); j++)
+ for (i = 0; i < num_online_cpus() && i < EDMA_CPU_CORES_SUPPORTED; i++) {
+ for (j = edma_cinfo->edma_percpu_info[i].tx_start; j < (edma_cinfo->edma_percpu_info[i].tx_start + edma_cinfo->num_txq_per_core); j++)
free_irq(edma_cinfo->tx_irq[j], &edma_cinfo->edma_percpu_info[i]);
for (j = edma_cinfo->edma_percpu_info[i].rx_start; j < (edma_cinfo->edma_percpu_info[i].rx_start + k); j++)
--- a/drivers/net/ethernet/qualcomm/essedma/edma.h
+++ b/drivers/net/ethernet/qualcomm/essedma/edma.h
@@ -324,6 +324,7 @@ struct edma_common_info {
u32 from_cpu; /* from CPU TPD field */
u32 num_rxq_per_core; /* Rx queues per core */
u32 num_txq_per_core; /* Tx queues per core */
+ u32 num_txq_per_core_netdev; /* Tx queues per core per netdev */
u16 tx_ring_count; /* Tx ring count */
u16 rx_ring_count; /* Rx ring*/
u16 rx_head_buffer_len; /* rx buffer length */
@@ -331,7 +332,7 @@ struct edma_common_info {
u32 page_mode; /* Jumbo frame supported flag */
u32 fraglist_mode; /* fraglist supported flag */
struct edma_hw hw; /* edma hw specific structure */
- struct edma_per_cpu_queues_info edma_percpu_info[CONFIG_NR_CPUS]; /* per cpu information */
+ struct edma_per_cpu_queues_info edma_percpu_info[EDMA_CPU_CORES_SUPPORTED]; /* per cpu information */
spinlock_t stats_lock; /* protect edma stats area for updation */
struct timer_list edma_stats_timer;
bool is_single_phy;
@@ -401,7 +402,7 @@ struct edma_adapter {
u32 link_state; /* phy link state */
u32 phy_mdio_addr; /* PHY device address on MII interface */
u32 poll_required; /* check if link polling is required */
- u32 tx_start_offset[CONFIG_NR_CPUS]; /* tx queue start */
+ u32 tx_start_offset[EDMA_CPU_CORES_SUPPORTED]; /* tx queue start */
u32 default_vlan_tag; /* vlan tag */
u32 dp_bitmap;
uint8_t phy_id[MII_BUS_ID_SIZE + 3];
--- a/drivers/net/ethernet/qualcomm/essedma/edma_axi.c
+++ b/drivers/net/ethernet/qualcomm/essedma/edma_axi.c
@@ -719,11 +719,7 @@ static int edma_axi_probe(struct platfor
int i, j, k, err = 0;
int portid_bmp;
int idx = 0, idx_mac = 0;
-
- if (CONFIG_NR_CPUS != EDMA_CPU_CORES_SUPPORTED) {
- dev_err(&pdev->dev, "Invalid CPU Cores\n");
- return -EINVAL;
- }
+ int netdev_group = 2;
if ((num_rxq != 4) && (num_rxq != 8)) {
dev_err(&pdev->dev, "Invalid RX queue, edma probe failed\n");
@@ -747,7 +743,7 @@ static int edma_axi_probe(struct platfor
/* Initialize the netdev array before allocation
* to avoid double free
*/
- for (i = 0 ; i < edma_cinfo->num_gmac ; i++)
+ for (i = 0 ; i < EDMA_MAX_PORTID_SUPPORTED; i++)
edma_netdev[i] = NULL;
for (i = 0 ; i < edma_cinfo->num_gmac ; i++) {
@@ -768,8 +764,11 @@ static int edma_axi_probe(struct platfor
/* Fill ring details */
edma_cinfo->num_tx_queues = EDMA_MAX_TRANSMIT_QUEUE;
- edma_cinfo->num_txq_per_core = (EDMA_MAX_TRANSMIT_QUEUE / 4);
+ edma_cinfo->num_txq_per_core = (EDMA_MAX_TRANSMIT_QUEUE / num_online_cpus());
+ edma_cinfo->num_txq_per_core_netdev = (EDMA_MAX_TRANSMIT_QUEUE / netdev_group / num_online_cpus());
edma_cinfo->tx_ring_count = EDMA_TX_RING_SIZE;
+ if (edma_cinfo->num_txq_per_core == 0)
+ edma_cinfo->num_txq_per_core = 1;
/* Update num rx queues based on module parameter */
edma_cinfo->num_rx_queues = num_rxq;
@@ -939,6 +938,13 @@ static int edma_axi_probe(struct platfor
idx_mac++;
}
+ if (edma_cinfo->num_gmac == 1) {
+ netdev_group = 1;
+ edma_cinfo->num_txq_per_core_netdev = (EDMA_MAX_TRANSMIT_QUEUE / netdev_group / num_online_cpus());
+ }
+ if (edma_cinfo->num_txq_per_core_netdev == 0)
+ edma_cinfo->num_txq_per_core_netdev = 1;
+
/* Populate the adapter structure register the netdevice */
for (i = 0; i < edma_cinfo->num_gmac; i++) {
int k, m;
@@ -946,17 +952,16 @@ static int edma_axi_probe(struct platfor
adapter[i] = netdev_priv(edma_netdev[i]);
adapter[i]->netdev = edma_netdev[i];
adapter[i]->pdev = pdev;
- for (j = 0; j < CONFIG_NR_CPUS; j++) {
- m = i % 2;
- adapter[i]->tx_start_offset[j] =
- ((j << EDMA_TX_CPU_START_SHIFT) + (m << 1));
+ for (j = 0; j < num_online_cpus() && j < EDMA_CPU_CORES_SUPPORTED; j++) {
+ m = i % netdev_group;
+ adapter[i]->tx_start_offset[j] = j * edma_cinfo->num_txq_per_core + m * edma_cinfo->num_txq_per_core_netdev;
/* Share the queues with available net-devices.
* For instance , with 5 net-devices
* eth0/eth2/eth4 will share q0,q1,q4,q5,q8,q9,q12,q13
* and eth1/eth3 will get the remaining.
*/
for (k = adapter[i]->tx_start_offset[j]; k <
- (adapter[i]->tx_start_offset[j] + 2); k++) {
+ (adapter[i]->tx_start_offset[j] + edma_cinfo->num_txq_per_core_netdev); k++) {
if (edma_fill_netdev(edma_cinfo, k, i, j)) {
pr_err("Netdev overflow Error\n");
goto err_register;
@@ -1109,9 +1114,12 @@ static int edma_axi_probe(struct platfor
/* populate per_core_info, do a napi_Add, request 16 TX irqs,
* 8 RX irqs, do a napi enable
*/
- for (i = 0; i < CONFIG_NR_CPUS; i++) {
+ for (i = 0; i < num_online_cpus() && i < EDMA_CPU_CORES_SUPPORTED; i++) {
u8 rx_start;
+ tx_mask[i] = (0xFFFF >> (16 - edma_cinfo->num_txq_per_core)) << (i * edma_cinfo->num_txq_per_core);
+ tx_start[i] = i * edma_cinfo->num_txq_per_core;
+
edma_cinfo->edma_percpu_info[i].napi.state = 0;
netif_napi_add(edma_netdev[0],
@@ -1131,7 +1139,7 @@ static int edma_axi_probe(struct platfor
/* Request irq per core */
for (j = edma_cinfo->edma_percpu_info[i].tx_start;
- j < tx_start[i] + 4; j++) {
+ j < tx_start[i] + edma_cinfo->num_txq_per_core; j++) {
sprintf(&edma_tx_irq[j][0], "edma_eth_tx%d", j);
err = request_irq(edma_cinfo->tx_irq[j],
edma_interrupt,
@@ -1253,7 +1261,7 @@ err_configure:
#endif
err_rmap_add_fail:
edma_free_irqs(adapter[0]);
- for (i = 0; i < CONFIG_NR_CPUS; i++)
+ for (i = 0; i < num_online_cpus() && i < EDMA_CPU_CORES_SUPPORTED; i++)
napi_disable(&edma_cinfo->edma_percpu_info[i].napi);
err_reset:
err_unregister_sysctl_tbl:
@@ -1301,7 +1309,7 @@ static int edma_axi_remove(struct platfo
unregister_netdev(edma_netdev[i]);
edma_stop_rx_tx(hw);
- for (i = 0; i < CONFIG_NR_CPUS; i++)
+ for (i = 0; i < num_online_cpus() && i < EDMA_CPU_CORES_SUPPORTED; i++)
napi_disable(&edma_cinfo->edma_percpu_info[i].napi);
edma_irq_disable(edma_cinfo);

52
target/linux/ipq40xx/patches-4.19/716-essedma-reduce-write-reg.patch
View File

@ -1,52 +0,0 @@
--- a/drivers/net/ethernet/qualcomm/essedma/edma.c
+++ b/drivers/net/ethernet/qualcomm/essedma/edma.c
@@ -2079,15 +2079,13 @@ int edma_poll(struct napi_struct *napi,
int i, work_done = 0;
u16 rx_pending_fill;
- /* Store the Rx/Tx status by ANDing it with
- * appropriate CPU RX?TX mask
+ /* Store the Tx status by ANDing it with
+ * appropriate CPU TX mask
*/
- edma_read_reg(EDMA_REG_RX_ISR, &reg_data);
- edma_percpu_info->rx_status |= reg_data & edma_percpu_info->rx_mask;
- shadow_rx_status = edma_percpu_info->rx_status;
edma_read_reg(EDMA_REG_TX_ISR, &reg_data);
edma_percpu_info->tx_status |= reg_data & edma_percpu_info->tx_mask;
shadow_tx_status = edma_percpu_info->tx_status;
+ edma_write_reg(EDMA_REG_TX_ISR, shadow_tx_status);
/* Every core will have a start, which will be computed
* in probe and stored in edma_percpu_info->tx_start variable.
@@ -2102,6 +2100,14 @@ int edma_poll(struct napi_struct *napi,
edma_percpu_info->tx_status &= ~(1 << queue_id);
}
+ /* Store the Rx status by ANDing it with
+ * appropriate CPU RX mask
+ */
+ edma_read_reg(EDMA_REG_RX_ISR, &reg_data);
+ edma_percpu_info->rx_status |= reg_data & edma_percpu_info->rx_mask;
+ shadow_rx_status = edma_percpu_info->rx_status;
+ edma_write_reg(EDMA_REG_RX_ISR, shadow_rx_status);
+
/* Every core will have a start, which will be computed
* in probe and stored in edma_percpu_info->tx_start variable.
* We will shift the status bit by tx_start to obtain
@@ -2126,15 +2132,6 @@ int edma_poll(struct napi_struct *napi,
}
}
- /* Clear the status register, to avoid the interrupts to
- * reoccur.This clearing of interrupt status register is
- * done here as writing to status register only takes place
- * once the producer/consumer index has been updated to
- * reflect that the packet transmission/reception went fine.
- */
- edma_write_reg(EDMA_REG_RX_ISR, shadow_rx_status);
- edma_write_reg(EDMA_REG_TX_ISR, shadow_tx_status);
-
/* If budget not fully consumed, exit the polling mode */
if (likely(work_done < budget)) {
napi_complete(napi);

46
target/linux/ipq40xx/patches-4.19/717-essedma-Disable-TCP-segmentation-offload-for-IPv6.patch
View File

@ -1,46 +0,0 @@
From: Sven Eckelmann <sven@narfation.org>
Date: Tue, 9 Jun 2020 14:08:44 +0200
Subject: essedma: Disable TCP segmentation offload for IPv6
It was noticed that the the whole MAC can hang when transferring data from
one ar40xx port (WAN ports) to the CPU and from the CPU back to another
ar40xx port (LAN ports). The CPU was doing only NATing in that process.
Usually, the problem first starts with a simple data corruption:
$ wget https://cdimage.debian.org/debian-cd/current/amd64/iso-cd/debian-10.4.0-amd64-netinst.iso -O /dev/null
...
Connecting to saimei.ftp.acc.umu.se (saimei.ftp.acc.umu.se)|2001:6b0:19::138|:443... connected.
...
Read error at byte 48807936/352321536 (Decryption has failed.). Retrying.
But after a short while, the whole MAC will stop to react. No traffic can
be transported anymore from the CPU port from/to the AR40xx PHY/switch and
the MAC has to be resetted.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
--- a/drivers/net/ethernet/qualcomm/essedma/edma_axi.c
+++ b/drivers/net/ethernet/qualcomm/essedma/edma_axi.c
@@ -975,17 +975,14 @@ static int edma_axi_probe(struct platfor
edma_netdev[i]->features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM
| NETIF_F_HW_VLAN_CTAG_TX
| NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_SG |
- NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_GRO;
+ NETIF_F_TSO | NETIF_F_GRO;
edma_netdev[i]->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM |
NETIF_F_HW_VLAN_CTAG_RX
- | NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 |
- NETIF_F_GRO;
+ | NETIF_F_SG | NETIF_F_TSO | NETIF_F_GRO;
edma_netdev[i]->vlan_features = NETIF_F_HW_CSUM | NETIF_F_SG |
- NETIF_F_TSO | NETIF_F_TSO6 |
- NETIF_F_GRO;
+ NETIF_F_TSO | NETIF_F_GRO;
edma_netdev[i]->wanted_features = NETIF_F_HW_CSUM | NETIF_F_SG |
- NETIF_F_TSO | NETIF_F_TSO6 |
- NETIF_F_GRO;
+ NETIF_F_TSO | NETIF_F_GRO;
#ifdef CONFIG_RFS_ACCEL
edma_netdev[i]->features |= NETIF_F_RXHASH | NETIF_F_NTUPLE;

180
target/linux/ipq40xx/patches-4.19/850-soc-add-qualcomm-syscon.patch
View File

@ -1,180 +0,0 @@
From: Christian Lamparter <chunkeey@googlemail.com>
Subject: SoC: add qualcomm syscon
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_st
obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
obj-$(CONFIG_QCOM_SMSM) += smsm.o
obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
+obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o
obj-$(CONFIG_QCOM_APR) += apr.o
obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o
obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -146,6 +146,13 @@ config QCOM_SMSM
Say yes here to support the Qualcomm Shared Memory State Machine.
The state machine is represented by bits in shared memory.
+config QCOM_TCSR
+ tristate "QCOM Top Control and Status Registers"
+ depends on ARCH_QCOM
+ help
+ Say y here to enable TCSR support. The TCSR provides control
+ functions for various peripherals.
+
config QCOM_WCNSS_CTRL
tristate "Qualcomm WCNSS control driver"
depends on ARCH_QCOM
--- /dev/null
+++ b/drivers/soc/qcom/qcom_tcsr.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright (c) 2014, The Linux foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License rev 2 and
+ * only rev 2 as published by the free Software foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#define TCSR_USB_PORT_SEL 0xb0
+#define TCSR_USB_HSPHY_CONFIG 0xC
+
+#define TCSR_ESS_INTERFACE_SEL_OFFSET 0x0
+#define TCSR_ESS_INTERFACE_SEL_MASK 0xf
+
+#define TCSR_WIFI0_GLB_CFG_OFFSET 0x0
+#define TCSR_WIFI1_GLB_CFG_OFFSET 0x4
+#define TCSR_PNOC_SNOC_MEMTYPE_M0_M2 0x4
+
+static int tcsr_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ const struct device_node *node = pdev->dev.of_node;
+ void __iomem *base;
+ u32 val;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ if (!of_property_read_u32(node, "qcom,usb-ctrl-select", &val)) {
+ dev_err(&pdev->dev, "setting usb port select = %d\n", val);
+ writel(val, base + TCSR_USB_PORT_SEL);
+ }
+
+ if (!of_property_read_u32(node, "qcom,usb-hsphy-mode-select", &val)) {
+ dev_info(&pdev->dev, "setting usb hs phy mode select = %x\n", val);
+ writel(val, base + TCSR_USB_HSPHY_CONFIG);
+ }
+
+ if (!of_property_read_u32(node, "qcom,ess-interface-select", &val)) {
+ u32 tmp = 0;
+ dev_info(&pdev->dev, "setting ess interface select = %x\n", val);
+ tmp = readl(base + TCSR_ESS_INTERFACE_SEL_OFFSET);
+ tmp = tmp & (~TCSR_ESS_INTERFACE_SEL_MASK);
+ tmp = tmp | (val&TCSR_ESS_INTERFACE_SEL_MASK);
+ writel(tmp, base + TCSR_ESS_INTERFACE_SEL_OFFSET);
+ }
+
+ if (!of_property_read_u32(node, "qcom,wifi_glb_cfg", &val)) {
+ dev_info(&pdev->dev, "setting wifi_glb_cfg = %x\n", val);
+ writel(val, base + TCSR_WIFI0_GLB_CFG_OFFSET);
+ writel(val, base + TCSR_WIFI1_GLB_CFG_OFFSET);
+ }
+
+ if (!of_property_read_u32(node, "qcom,wifi_noc_memtype_m0_m2", &val)) {
+ dev_info(&pdev->dev,
+ "setting wifi_noc_memtype_m0_m2 = %x\n", val);
+ writel(val, base + TCSR_PNOC_SNOC_MEMTYPE_M0_M2);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id tcsr_dt_match[] = {
+ { .compatible = "qcom,tcsr", },
+ { },
+};
+
+MODULE_DEVICE_TABLE(of, tcsr_dt_match);
+
+static struct platform_driver tcsr_driver = {
+ .driver = {
+ .name = "tcsr",
+ .owner = THIS_MODULE,
+ .of_match_table = tcsr_dt_match,
+ },
+ .probe = tcsr_probe,
+};
+
+module_platform_driver(tcsr_driver);
+
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
+MODULE_DESCRIPTION("QCOM TCSR driver");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+++ b/include/dt-bindings/soc/qcom,tcsr.h
@@ -0,0 +1,48 @@
+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __DT_BINDINGS_QCOM_TCSR_H
+#define __DT_BINDINGS_QCOM_TCSR_H
+
+#define TCSR_USB_SELECT_USB3_P0 0x1
+#define TCSR_USB_SELECT_USB3_P1 0x2
+#define TCSR_USB_SELECT_USB3_DUAL 0x3
+
+/* IPQ40xx HS PHY Mode Select */
+#define TCSR_USB_HSPHY_HOST_MODE 0x00E700E7
+#define TCSR_USB_HSPHY_DEVICE_MODE 0x00C700E7
+
+/* IPQ40xx ess interface mode select */
+#define TCSR_ESS_PSGMII 0
+#define TCSR_ESS_PSGMII_RGMII5 1
+#define TCSR_ESS_PSGMII_RMII0 2
+#define TCSR_ESS_PSGMII_RMII1 4
+#define TCSR_ESS_PSGMII_RMII0_RMII1 6
+#define TCSR_ESS_PSGMII_RGMII4 9
+
+/*
+ * IPQ40xx WiFi Global Config
+ * Bit 30:AXID_EN
+ * Enable AXI master bus Axid translating to confirm all txn submitted by order
+ * Bit 24: Use locally generated socslv_wxi_bvalid
+ * 1: use locally generate socslv_wxi_bvalid for performance.
+ * 0: use SNOC socslv_wxi_bvalid.
+ */
+#define TCSR_WIFI_GLB_CFG 0x41000000
+
+/* IPQ40xx MEM_TYPE_SEL_M0_M2 Select Bit 26:24 - 2 NORMAL */
+#define TCSR_WIFI_NOC_MEMTYPE_M0_M2 0x02222222
+
+/* TCSR A/B REG */
+#define IPQ806X_TCSR_REG_A_ADM_CRCI_MUX_SEL 0
+#define IPQ806X_TCSR_REG_B_ADM_CRCI_MUX_SEL 1
+
+#endif

157
target/linux/ipq40xx/patches-4.19/900-dts-ipq4019-ap-dk01.1.patch
View File

@ -1,157 +0,0 @@
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -15,6 +15,7 @@
*/
#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
@@ -29,6 +30,32 @@
};
soc {
+ tcsr@194b000 {
+ /* select hostmode */
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ status = "okay";
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
rng@22000 {
status = "ok";
};
@@ -74,14 +101,6 @@
pinctrl-names = "default";
status = "ok";
cs-gpios = <&tlmm 54 0>;
-
- mx25l25635e@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0>;
- compatible = "mx25l25635e";
- spi-max-frequency = <24000000>;
- };
};
serial@78af000 {
@@ -110,6 +129,22 @@
status = "ok";
};
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+
usb3_ss_phy: ssphy@9a000 {
status = "okay";
};
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
@@ -18,5 +18,73 @@
/ {
model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
+ compatible = "qcom,ap-dk01.1-c1", "qcom,ap-dk01.2-c1";
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>;
+ };
+};
+
+&blsp1_spi1 {
+ mx25l25635f@0 {
+ compatible = "mx25l25635f", "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+
+ SBL1@0 {
+ label = "SBL1";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+ MIBIB@40000 {
+ label = "MIBIB";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+ QSEE@60000 {
+ label = "QSEE";
+ reg = <0x60000 0x60000>;
+ read-only;
+ };
+ CDT@c0000 {
+ label = "CDT";
+ reg = <0xc0000 0x10000>;
+ read-only;
+ };
+ DDRPARAMS@d0000 {
+ label = "DDRPARAMS";
+ reg = <0xd0000 0x10000>;
+ read-only;
+ };
+ APPSBLENV@e0000 {
+ label = "APPSBLENV";
+ reg = <0xe0000 0x10000>;
+ read-only;
+ };
+ APPSBL@f0000 {
+ label = "APPSBL";
+ reg = <0xf0000 0x80000>;
+ read-only;
+ };
+ ART@170000 {
+ label = "ART";
+ reg = <0x170000 0x10000>;
+ read-only;
+ };
+ kernel@180000 {
+ label = "kernel";
+ reg = <0x180000 0x400000>;
+ };
+ rootfs@580000 {
+ label = "rootfs";
+ reg = <0x580000 0x1600000>;
+ };
+ firmware@180000 {
+ label = "firmware";
+ reg = <0x180000 0x1a00000>;
+ };
+ };
};

70
target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch
View File

@ -1,70 +0,0 @@
From a10fab12a927e60b7141a602e740d70cb4d09e4a Mon Sep 17 00:00:00 2001
From: John Crispin <john@phrozen.org>
Date: Thu, 9 Mar 2017 11:03:18 +0100
Subject: [PATCH] arm: boot: add dts files
Signed-off-by: John Crispin <john@phrozen.org>
---
arch/arm/boot/dts/Makefile | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -785,11 +785,57 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
+ qcom-ipq4018-a42.dtb \
+ qcom-ipq4018-ap120c-ac.dtb \
+ qcom-ipq4018-dap-2610.dtb \
+ qcom-ipq4018-cs-w3-wd1200g-eup.dtb \
+ qcom-ipq4018-ea6350v3.dtb \
+ qcom-ipq4018-eap1300.dtb \
+ qcom-ipq4018-emd1.dtb \
+ qcom-ipq4018-emr3500.dtb \
+ qcom-ipq4018-ens620ext.dtb \
+ qcom-ipq4018-ex6100v2.dtb \
+ qcom-ipq4018-ex6150v2.dtb \
+ qcom-ipq4018-ex6200v2.dtb \
+ qcom-ipq4018-fritzbox-4040.dtb \
+ qcom-ipq4018-jalapeno.dtb \
+ qcom-ipq4018-meshpoint-one.dtb \
+ qcom-ipq4018-nbg6617.dtb \
+ qcom-ipq4018-rt-ac58u.dtb \
+ qcom-ipq4018-wre6606.dtb \
qcom-ipq4019-ap.dk01.1-c1.dtb \
qcom-ipq4019-ap.dk04.1-c1.dtb \
qcom-ipq4019-ap.dk04.1-c3.dtb \
qcom-ipq4019-ap.dk07.1-c1.dtb \
qcom-ipq4019-ap.dk07.1-c2.dtb \
+ qcom-ipq4019-a62.dtb \
+ qcom-ipq4019-c526a.dtb \
+ qcom-ipq4019-cm520-79f.dtb \
+ qcom-ipq4019-ea8300.dtb \
+ qcom-ipq4019-eap2200.dtb \
+ qcom-ipq4019-hugo-ac1200.dtb \
+ qcom-ipq4019-fritzbox-7530.dtb \
+ qcom-ipq4019-fritzrepeater-1200.dtb \
+ qcom-ipq4019-fritzrepeater-3000.dtb \
+ qcom-ipq4019-map-ac2200.dtb \
+ qcom-ipq4019-e2600ac-c1.dtb \
+ qcom-ipq4019-e2600ac-c2.dtb \
+ qcom-ipq4019-habanero-dvk.dtb \
+ qcom-ipq4019-r619ac.dtb \
+ qcom-ipq4019-rtl30vw.dtb \
+ qcom-ipq4019-rt-acrh17.dtb \
+ qcom-ipq4019-u4019-32m.dtb \
+ qcom-ipq4019-wpj419.dtb \
+ qcom-ipq4019-wr142ac.dtb \
+ qcom-ipq4019-wr142ac-nand.dtb \
+ qcom-ipq4019-wtr-m2133hp.dtb \
+ qcom-ipq4028-wpj428.dtb \
+ qcom-ipq4029-ap-303.dtb \
+ qcom-ipq4029-ap-303h.dtb \
+ qcom-ipq4029-ap-365.dtb \
+ qcom-ipq4029-gl-b1300.dtb \
+ qcom-ipq4029-gl-s1300.dtb \
+ qcom-ipq4029-mr33.dtb \
qcom-ipq8064-ap148.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \

75
target/linux/ipq40xx/patches-4.19/901-essedma-disable-default-vlan-tagging.patch
View File

@ -1,75 +0,0 @@
From 42b508d91b7f51b054f383e3aa42089ccab9300d Mon Sep 17 00:00:00 2001
From: Chen Minqiang <ptpt52@gmail.com>
Date: Thu, 15 Mar 2018 05:33:46 +0800
Subject: [PATCH] essedma: disable default vlan tagging
The essedma driver has its own unique take on VLAN management
and its configuration. In the original SDK, each VLAN is
assigned one virtual ethernet netdev.
However, this is non-standard. So, this patch does away
with the default_vlan_tag property the driver is using
and therefore forces the user to use the kernel's vlan
feature.
This patch also removes the "qcom,poll_required = <1>;" from
the essedma node.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 5 ++---
drivers/net/ethernet/qualcomm/essedma/edma.c | 14 +++++---------
2 files changed, 7 insertions(+), 12 deletions(-)
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -652,8 +652,7 @@
qcom,page-mode = <0>;
qcom,rx_head_buf_size = <1540>;
qcom,mdio_supported;
- qcom,poll_required = <1>;
- qcom,num_gmac = <2>;
+ qcom,num_gmac = <1>;
interrupts = <0 65 IRQ_TYPE_EDGE_RISING
0 66 IRQ_TYPE_EDGE_RISING
0 67 IRQ_TYPE_EDGE_RISING
@@ -691,7 +690,7 @@
gmac0: gmac0 {
local-mac-address = [00 00 00 00 00 00];
- vlan_tag = <1 0x1f>;
+ vlan_tag = <1 0x3f>;
};
gmac1: gmac1 {
--- a/drivers/net/ethernet/qualcomm/essedma/edma.c
+++ b/drivers/net/ethernet/qualcomm/essedma/edma.c
@@ -721,13 +721,11 @@ static u16 edma_rx_complete(struct edma_
edma_receive_checksum(rd, skb);
/* Process VLAN HW acceleration indication provided by HW */
- if (unlikely(adapter->default_vlan_tag != rd->rrd4)) {
- vlan = rd->rrd4;
- if (likely(rd->rrd7 & EDMA_RRD_CVLAN))
- __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan);
- else if (rd->rrd1 & EDMA_RRD_SVLAN)
- __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021AD), vlan);
- }
+ vlan = rd->rrd4;
+ if (likely(rd->rrd7 & EDMA_RRD_CVLAN))
+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan);
+ else if (rd->rrd1 & EDMA_RRD_SVLAN)
+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021AD), vlan);
/* Update rx statistics */
adapter->stats.rx_packets++;
@@ -1408,8 +1406,6 @@ netdev_tx_t edma_xmit(struct sk_buff *sk
if (!adapter->edma_cinfo->is_single_phy) {
if (unlikely(skb_vlan_tag_present(skb)))
flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_FLAG;
- else if (adapter->default_vlan_tag)
- flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG;
}
/* Check and mark checksum offload */

12
target/linux/ipq40xx/patches-4.19/997-device_tree_cmdline.patch
View File

@ -1,12 +0,0 @@
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -1090,6 +1090,9 @@ int __init early_init_dt_scan_chosen(uns
p = of_get_flat_dt_prop(node, "bootargs", &l);
if (p != NULL && l > 0)
strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
+ p = of_get_flat_dt_prop(node, "bootargs-append", &l);
+ if (p != NULL && l > 0)
+ strlcat(data, p, min_t(int, strlen(data) + (int)l, COMMAND_LINE_SIZE));
/*
* CONFIG_CMDLINE is meant to be a default in case nothing else

490
target/linux/ipq806x/config-4.14
View File

@ -1,490 +0,0 @@
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_AMBA_PL08X is not set
# CONFIG_APQ_GCC_8084 is not set
# CONFIG_APQ_MMCC_8084 is not set
CONFIG_AR8216_PHY=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_ARCH_MDM9615 is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MSM8960=y
CONFIG_ARCH_MSM8974=y
CONFIG_ARCH_MSM8X60=y
CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
CONFIG_ARCH_MULTI_V6_V7=y
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_NR_GPIO=0
CONFIG_ARCH_QCOM=y
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARM=y
CONFIG_ARM_AMBA=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y
CONFIG_ARM_CPUIDLE=y
CONFIG_ARM_CPU_SUSPEND=y
# CONFIG_ARM_CPU_TOPOLOGY is not set
CONFIG_ARM_GIC=y
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_L1_CACHE_SHIFT_6=y
# CONFIG_ARM_LPAE is not set
CONFIG_ARM_PATCH_IDIV=y
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_ARM_QCOM_CPUFREQ=y
CONFIG_ARM_QCOM_CPUIDLE=y
# CONFIG_ARM_SMMU is not set
# CONFIG_ARM_SP805_WATCHDOG is not set
CONFIG_ARM_THUMB=y
# CONFIG_ARM_THUMBEE is not set
CONFIG_ARM_UNWIND=y
CONFIG_ARM_VIRT_EXT=y
# CONFIG_BINFMT_FLAT is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_MQ_PCI=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_BOUNCE=y
CONFIG_BUS_TOPOLOGY_ADHOC=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_PROBE=y
CONFIG_CLKSRC_QCOM=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_CPUFREQ_DT=y
CONFIG_CPUFREQ_DT_PLATDEV=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_HAS_ASID=y
# CONFIG_CPU_ICACHE_DISABLE is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_PM=y
CONFIG_CPU_RMAP=y
CONFIG_CPU_THERMAL=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_V7=y
CONFIG_CRC16=y
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_SLICEBY8=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_DEBUG_GPIO=y
# CONFIG_DEBUG_UART_8250 is not set
CONFIG_DEBUG_UNCOMPRESS=y
# CONFIG_DEBUG_USER is not set
CONFIG_DMADEVICES=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_OF=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DTC=y
CONFIG_DT_IDLE_STATES=y
# CONFIG_DWMAC_DWC_QOS_ETH is not set
# CONFIG_DWMAC_GENERIC is not set
CONFIG_DWMAC_IPQ806X=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_EARLY_PRINTK=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_ETHERNET_PACKET_MANGLE=y
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PINCONF=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_SYSFS=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDEN_BRANCH_PREDICTOR=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_ARM_ARCH_TIMER=y
CONFIG_HAVE_ARM_SMCCC=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_CBPF_JIT=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_SMP=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_UID16=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_HWMON=y
CONFIG_HWSPINLOCK=y
CONFIG_HWSPINLOCK_QCOM=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_MSM=y
CONFIG_HZ_FIXED=0
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_QUP=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
CONFIG_IOMMU_SUPPORT=y
# CONFIG_IPQ_GCC_4019 is not set
CONFIG_IPQ_GCC_806X=y
# CONFIG_IPQ_GCC_8074 is not set
# CONFIG_IPQ_LCC_806X is not set
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_KPSS_XCC=y
CONFIG_KRAITCC=y
CONFIG_KRAIT_CLOCKS=y
CONFIG_KRAIT_L2_ACCESSORS=y
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LIBFDT=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_BOARDINFO=y
CONFIG_MDIO_GPIO=y
# CONFIG_MDM_GCC_9615 is not set
# CONFIG_MDM_LCC_9615 is not set
# CONFIG_MFD_MAX77620 is not set
CONFIG_MFD_QCOM_RPM=y
# CONFIG_MFD_SPMI_PMIC is not set
CONFIG_MFD_SYSCON=y
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
CONFIG_MIGHT_HAVE_PCI=y
CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_QCOM_DML=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_MSM=y
# CONFIG_MMC_SDHCI_PCI is not set
CONFIG_MMC_SDHCI_PLTFM=y
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MSM_BUS_SCALING=y
CONFIG_MSM_GCC_8660=y
# CONFIG_MSM_GCC_8916 is not set
# CONFIG_MSM_GCC_8960 is not set
# CONFIG_MSM_GCC_8974 is not set
# CONFIG_MSM_GCC_8994 is not set
# CONFIG_MSM_GCC_8996 is not set
# CONFIG_MSM_IOMMU is not set
# CONFIG_MSM_LCC_8960 is not set
# CONFIG_MSM_MMCC_8960 is not set
# CONFIG_MSM_MMCC_8974 is not set
# CONFIG_MSM_MMCC_8996 is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_QCOM=y
# CONFIG_MTD_PHYSMAP_OF_VERSATILE is not set
CONFIG_MTD_QCOM_SMEM_PARTS=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPLIT_FIT_FW=y
CONFIG_MTD_SPLIT_UIMAGE_FW=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MULTI_IRQ_HANDLER=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEON=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_HWMON=y
CONFIG_NET_DSA_QCA8K=y
CONFIG_NET_DSA_TAG_QCA=y
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NET_SWITCHDEV=y
CONFIG_NLS=y
CONFIG_NO_BOOTMEM=y
CONFIG_NO_HZ=y
CONFIG_NO_HZ_COMMON=y
CONFIG_NO_HZ_IDLE=y
CONFIG_NR_CPUS=2
CONFIG_NVMEM=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OLD_SIGACTION=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_PADATA=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PCI=y
CONFIG_PCIEAER=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIE_DW=y
CONFIG_PCIE_QCOM=y
CONFIG_PCI_DEBUG=y
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
# CONFIG_PHY_QCOM_APQ8064_SATA is not set
CONFIG_PHY_QCOM_IPQ806X_SATA=y
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_UFS is not set
CONFIG_PINCTRL=y
# CONFIG_PINCTRL_APQ8064 is not set
# CONFIG_PINCTRL_APQ8084 is not set
# CONFIG_PINCTRL_IPQ4019 is not set
CONFIG_PINCTRL_IPQ8064=y
# CONFIG_PINCTRL_IPQ8074 is not set
# CONFIG_PINCTRL_MDM9615 is not set
CONFIG_PINCTRL_MSM=y
# CONFIG_PINCTRL_MSM8660 is not set
# CONFIG_PINCTRL_MSM8916 is not set
# CONFIG_PINCTRL_MSM8960 is not set
# CONFIG_PINCTRL_MSM8994 is not set
# CONFIG_PINCTRL_MSM8996 is not set
# CONFIG_PINCTRL_MSM8X74 is not set
# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
# CONFIG_PL330_DMA is not set
CONFIG_PM_OPP=y
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_BRCMKONA is not set
CONFIG_POWER_RESET_MSM=y
CONFIG_POWER_SUPPLY=y
CONFIG_PPS=y
CONFIG_PRINTK_TIME=y
CONFIG_PTP_1588_CLOCK=y
CONFIG_QCOM_ADM=y
CONFIG_QCOM_BAM_DMA=y
CONFIG_QCOM_CLK_RPM=y
# CONFIG_QCOM_EBI2 is not set
CONFIG_QCOM_GDSC=y
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_HFPLL=y
# CONFIG_QCOM_IOMMU is not set
CONFIG_QCOM_PM=y
# CONFIG_QCOM_Q6V5_PIL is not set
CONFIG_QCOM_QFPROM=y
CONFIG_QCOM_RPMCC=y
CONFIG_QCOM_SCM=y
CONFIG_QCOM_SCM_32=y
# CONFIG_QCOM_SMD is not set
CONFIG_QCOM_SMEM=y
# CONFIG_QCOM_SMP2P is not set
# CONFIG_QCOM_SMSM is not set
CONFIG_QCOM_TCSR=y
CONFIG_QCOM_TSENS=y
# CONFIG_QCOM_WCNSS_PIL is not set
CONFIG_QCOM_WDT=y
# CONFIG_QRTR is not set
CONFIG_RAS=y
CONFIG_RATIONAL=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_STALL_COMMON=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_SPI=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_QCOM_RPM=y
# CONFIG_REGULATOR_QCOM_SPMI is not set
CONFIG_RESET_CONTROLLER=y
CONFIG_RFS_ACCEL=y
# CONFIG_RPMSG_QCOM_SMD is not set
CONFIG_RPS=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_I2C_AND_SPI=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_SCHED_INFO is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SERIAL_AMBA_PL011 is not set
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
# CONFIG_SPI_CADENCE_QUADSPI is not set
CONFIG_SPI_MASTER=y
CONFIG_SPI_QUP=y
CONFIG_SPMI=y
CONFIG_SPMI_MSM_PMIC_ARB=y
CONFIG_SRCU=y
CONFIG_STMMAC_ETH=y
CONFIG_STMMAC_PLATFORM=y
CONFIG_SWCONFIG=y
CONFIG_SWCONFIG_LEDS=y
CONFIG_SWIOTLB=y
CONFIG_SWPHY=y
CONFIG_SWP_EMULATE=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_THERMAL=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
# CONFIG_THUMB2_KERNEL is not set
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TREE_RCU=y
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_USB=y
CONFIG_USB_COMMON=y
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_QCOM_8X16_PHY is not set
CONFIG_USB_SUPPORT=y
# CONFIG_USB_UHCI_HCD is not set
CONFIG_USE_OF=y
CONFIG_VDSO=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_WATCHDOG_CORE=y
CONFIG_XPS=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y

507
target/linux/ipq806x/config-4.19
View File

@ -1,507 +0,0 @@
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_APQ_GCC_8084 is not set
# CONFIG_APQ_MMCC_8084 is not set
CONFIG_AR8216_PHY=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_ARCH_HAS_KCOV=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_ARCH_HAS_PHYS_TO_DMA=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_ARCH_MDM9615 is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MSM8960=y
CONFIG_ARCH_MSM8974=y
CONFIG_ARCH_MSM8X60=y
CONFIG_ARCH_MULTIPLATFORM=y
CONFIG_ARCH_MULTI_V6_V7=y
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_NR_GPIO=0
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
CONFIG_ARCH_QCOM=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARM=y
CONFIG_ARM_AMBA=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y
CONFIG_ARM_CPUIDLE=y
CONFIG_ARM_CPU_SUSPEND=y
# CONFIG_ARM_CPU_TOPOLOGY is not set
CONFIG_ARM_GIC=y
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_L1_CACHE_SHIFT_6=y
# CONFIG_ARM_LPAE is not set
CONFIG_ARM_PATCH_IDIV=y
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
CONFIG_ARM_QCOM_CPUIDLE=y
# CONFIG_ARM_SMMU is not set
# CONFIG_ARM_SP805_WATCHDOG is not set
CONFIG_ARM_THUMB=y
# CONFIG_ARM_THUMBEE is not set
CONFIG_ARM_UNWIND=y
CONFIG_ARM_VIRT_EXT=y
CONFIG_ARM_MODULE_PLTS=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BOUNCE=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKSRC_QCOM=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_CPUFREQ_DT=y
CONFIG_CPUFREQ_DT_PLATDEV=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_HAS_ASID=y
# CONFIG_CPU_ICACHE_DISABLE is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_PM=y
CONFIG_CPU_RMAP=y
CONFIG_CPU_SPECTRE=y
CONFIG_CPU_THERMAL=y
CONFIG_CPU_THUMB_CAPABLE=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_V7=y
CONFIG_CRC16=y
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_SLICEBY8=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_DEV_QCOM_RNG=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_DEBUG_GPIO=y
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
# CONFIG_DEBUG_USER is not set
CONFIG_DMADEVICES=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_OF=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DTC=y
CONFIG_DT_IDLE_STATES=y
# CONFIG_DWMAC_DWC_QOS_ETH is not set
# CONFIG_DWMAC_GENERIC is not set
CONFIG_DWMAC_IPQ806X=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_ETHERNET_PACKET_MANGLE=y
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PINCONF=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDEN_BRANCH_PREDICTOR=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_ARM_ARCH_TIMER=y
CONFIG_HAVE_ARM_SMCCC=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_SMP=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_UID16=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_HWMON=y
CONFIG_HWSPINLOCK=y
CONFIG_HWSPINLOCK_QCOM=y
CONFIG_HW_RANDOM=y
CONFIG_HZ_FIXED=0
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_QUP=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
CONFIG_IOMMU_SUPPORT=y
# CONFIG_IPQ_GCC_4019 is not set
CONFIG_IPQ_GCC_806X=y
# CONFIG_IPQ_GCC_8074 is not set
# CONFIG_IPQ_LCC_806X is not set
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_KPSS_XCC=y
CONFIG_KRAITCC=y
CONFIG_KRAIT_CLOCKS=y
CONFIG_KRAIT_L2_ACCESSORS=y
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LIBFDT=y
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_GPIO=y
# CONFIG_MDM_GCC_9615 is not set
# CONFIG_MDM_LCC_9615 is not set
CONFIG_MEMFD_CREATE=y
CONFIG_MFD_QCOM_RPM=y
# CONFIG_MFD_SPMI_PMIC is not set
CONFIG_MFD_SYSCON=y
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
CONFIG_MIGHT_HAVE_PCI=y
CONFIG_MIGRATION=y
CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_QCOM_DML=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_MSM=y
# CONFIG_MMC_SDHCI_PCI is not set
CONFIG_MMC_SDHCI_PLTFM=y
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MSCC_OCELOT_SWITCH is not set
CONFIG_MSM_GCC_8660=y
# CONFIG_MSM_GCC_8916 is not set
# CONFIG_MSM_GCC_8960 is not set
# CONFIG_MSM_GCC_8974 is not set
# CONFIG_MSM_GCC_8994 is not set
# CONFIG_MSM_GCC_8996 is not set
# CONFIG_MSM_GCC_8998 is not set
# CONFIG_MSM_IOMMU is not set
# CONFIG_MSM_LCC_8960 is not set
# CONFIG_MSM_MMCC_8960 is not set
# CONFIG_MSM_MMCC_8974 is not set
# CONFIG_MSM_MMCC_8996 is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_QCOM=y
CONFIG_MTD_QCOM_SMEM_PARTS=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPLIT_FIT_FW=y
CONFIG_MTD_SPLIT_UIMAGE_FW=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEON=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_HWMON=y
CONFIG_NET_DSA_QCA8K=y
CONFIG_NET_DSA_TAG_QCA=y
# CONFIG_NET_DSA_VITESSE_VSC73XX is not set
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NET_SWITCHDEV=y
CONFIG_NLS=y
CONFIG_NO_BOOTMEM=y
CONFIG_NO_HZ=y
CONFIG_NO_HZ_COMMON=y
CONFIG_NO_HZ_IDLE=y
CONFIG_NR_CPUS=2
CONFIG_NVMEM=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_KOBJ=y
CONFIG_OF_MDIO=y
CONFIG_OF_NET=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OLD_SIGACTION=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_PADATA=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PCI=y
# CONFIG_PCI_V3_SEMI is not set
CONFIG_PCIEAER=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_QCOM=y
CONFIG_PCI_DEBUG=y
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
CONFIG_PHYLINK=y
# CONFIG_PHY_QCOM_APQ8064_SATA is not set
# CONFIG_PHY_QCOM_DWC3 is not set
CONFIG_PHY_QCOM_IPQ806X_SATA=y
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_UFS is not set
CONFIG_PINCTRL=y
# CONFIG_PINCTRL_APQ8064 is not set
# CONFIG_PINCTRL_APQ8084 is not set
# CONFIG_PINCTRL_IPQ4019 is not set
CONFIG_PINCTRL_IPQ8064=y
# CONFIG_PINCTRL_IPQ8074 is not set
# CONFIG_PINCTRL_MDM9615 is not set
CONFIG_PINCTRL_MSM=y
# CONFIG_PINCTRL_MSM8660 is not set
# CONFIG_PINCTRL_MSM8916 is not set
# CONFIG_PINCTRL_MSM8960 is not set
# CONFIG_PINCTRL_MSM8994 is not set
# CONFIG_PINCTRL_MSM8996 is not set
# CONFIG_PINCTRL_MSM8998 is not set
# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
# CONFIG_PINCTRL_SDM845 is not set
CONFIG_PLUGIN_HOSTCC="g++"
CONFIG_PM_OPP=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_MSM=y
CONFIG_POWER_SUPPLY=y
CONFIG_PPS=y
CONFIG_PRINTK_TIME=y
CONFIG_PTP_1588_CLOCK=y
# CONFIG_QCOM_A53PLL is not set
CONFIG_QCOM_ADM=y
CONFIG_QCOM_BAM_DMA=y
CONFIG_QCOM_CLK_RPM=y
# CONFIG_QCOM_COMMAND_DB is not set
# CONFIG_QCOM_EBI2 is not set
# CONFIG_QCOM_GENI_SE is not set
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_HFPLL=y
# CONFIG_QCOM_IOMMU is not set
# CONFIG_QCOM_LLCC is not set
# CONFIG_QCOM_PDC is not set
CONFIG_QCOM_PM=y
CONFIG_QCOM_QFPROM=y
# CONFIG_QCOM_RMTFS_MEM is not set
CONFIG_QCOM_RPMCC=y
CONFIG_QCOM_SCM=y
CONFIG_QCOM_SCM_32=y
# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set
CONFIG_QCOM_SMEM=y
# CONFIG_QCOM_SMSM is not set
CONFIG_QCOM_TCSR=y
CONFIG_QCOM_TSENS=y
CONFIG_QCOM_WDT=y
# CONFIG_QRTR is not set
CONFIG_RAS=y
CONFIG_RATIONAL=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_REFCOUNT_FULL=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_SPI=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_QCOM_RPM=y
# CONFIG_REGULATOR_QCOM_SPMI is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_QCOM_AOSS is not set
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_I2C_AND_SPI=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_SDM_DISPCC_845 is not set
# CONFIG_SDM_GCC_845 is not set
# CONFIG_SDM_VIDEOCC_845 is not set
CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_AMBA_PL011 is not set
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SGL_ALLOC=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y
CONFIG_SPI_QUP=y
CONFIG_SPMI=y
CONFIG_SPMI_MSM_PMIC_ARB=y
# CONFIG_SPMI_PMIC_CLKDIV is not set
CONFIG_SRCU=y
CONFIG_STMMAC_ETH=y
CONFIG_STMMAC_PLATFORM=y
CONFIG_SWCONFIG=y
CONFIG_SWCONFIG_LEDS=y
CONFIG_SWPHY=y
CONFIG_SWP_EMULATE=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_THERMAL=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
# CONFIG_THUMB2_KERNEL is not set
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_TREE_RCU=y
CONFIG_TREE_SRCU=y
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_USB=y
CONFIG_USB_COMMON=y
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_WATCHDOG_CORE=y
CONFIG_XPS=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y

248
target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
View File

@ -1,248 +0,0 @@
#include "qcom-ipq8064-v1.0.dtsi"
/ {
model = "Qualcomm IPQ8064/AP148";
compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
pinmux@800000 {
i2c4_pins: i2c4_pinmux {
pins = "gpio12", "gpio13";
function = "gsbi4";
bias-disable;
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
drive-strength = <10>;
bias-none;
};
};
nand_pins: nand_pins {
mux {
pins = "gpio34", "gpio35", "gpio36",
"gpio37", "gpio38", "gpio39",
"gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
function = "nand";
drive-strength = <10>;
bias-disable;
};
pullups {
pins = "gpio39";
bias-pull-up;
};
hold {
pins = "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
bias-bus-hold;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
};
};
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
serial@16340000 {
status = "ok";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "ok";
spi4: spi@1a280000 {
status = "ok";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 0>;
flash: m25p80@0 {
compatible = "s25fl256s1";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
partitions {
compatible = "qcom,smem";
};
};
};
};
sata-phy@1b400000 {
status = "ok";
};
sata@29000000 {
status = "ok";
};
phy@100f8800 { /* USB3 port 1 HS phy */
status = "ok";
};
phy@100f8830 { /* USB3 port 1 SS phy */
status = "ok";
};
phy@110f8800 { /* USB3 port 0 HS phy */
status = "ok";
};
phy@110f8830 { /* USB3 port 0 SS phy */
status = "ok";
};
usb30@0 {
status = "ok";
};
usb30@1 {
status = "ok";
};
pcie0: pci@1b500000 {
status = "ok";
};
pcie1: pci@1b700000 {
status = "ok";
force_gen1 = <1>;
};
nand@1ac00000 {
status = "ok";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
cs0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
partitions {
compatible = "qcom,smem";
};
};
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
};
gmac1: ethernet@37200000 {
status = "ok";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
fixed-link {
speed = <1000>;
full-duplex;
};
};
gmac2: ethernet@37400000 {
status = "ok";
phy-mode = "sgmii";
qcom,id = <2>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
&adm_dma {
status = "ok";
};

277
target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
View File

@ -1,277 +0,0 @@
#include "qcom-ipq8064-v1.0.dtsi"
/ {
model = "Qualcomm IPQ8064/AP161";
compatible = "qcom,ipq8064-ap161", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
};
chosen {
linux,stdout-path = "serial0:115200n8";
};
soc {
pinmux@800000 {
i2c4_pins: i2c4_pinmux {
pins = "gpio12", "gpio13";
function = "gsbi4";
bias-disable;
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
drive-strength = <10>;
bias-none;
};
};
nand_pins: nand_pins {
mux {
pins = "gpio34", "gpio35", "gpio36",
"gpio37", "gpio38", "gpio39",
"gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
function = "nand";
drive-strength = <10>;
bias-disable;
};
pullups {
pins = "gpio39";
bias-pull-up;
};
hold {
pins = "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
bias-bus-hold;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio2", "gpio27", "gpio28",
"gpio29", "gpio30", "gpio31",
"gpio32", "gpio51", "gpio52",
"gpio59", "gpio60", "gpio61",
"gpio62" , "gpio66";
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
};
};
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
serial@16340000 {
status = "ok";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "ok";
spi4: spi@1a280000 {
status = "ok";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 0>;
flash: m25p80@0 {
compatible = "s25fl256s1";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
partitions {
compatible = "qcom,smem";
};
};
};
};
sata-phy@1b400000 {
status = "ok";
};
sata@29000000 {
status = "ok";
};
phy@100f8800 { /* USB3 port 1 HS phy */
status = "ok";
};
phy@100f8830 { /* USB3 port 1 SS phy */
status = "ok";
};
phy@110f8800 { /* USB3 port 0 HS phy */
status = "ok";
};
phy@110f8830 { /* USB3 port 0 SS phy */
status = "ok";
};
usb30@0 {
status = "ok";
};
usb30@1 {
status = "ok";
};
pcie0: pci@1b500000 {
status = "ok";
};
pcie1: pci@1b700000 {
status = "ok";
force_gen1 = <1>;
};
pcie2: pci@1b900000 {
status = "ok";
};
nand@1ac00000 {
status = "ok";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
cs0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
partitions {
compatible = "qcom,smem";
};
};
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x20080 /* PAD6_MODE */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
qca,phy-rgmii-en;
qca,txclk-delay-en;
qca,rxclk-delay-en;
};
phy3: ethernet-phy@3 {
device_type = "ethernet-phy";
reg = <3>;
};
};
gmac0: ethernet@37000000 {
status = "ok";
phy-mode = "rgmii";
qcom,id = <0>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mdiobus = <&mdio0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
gmac1: ethernet@37200000 {
status = "ok";
phy-mode = "rgmii";
qcom,id = <1>;
mdiobus = <&mdio0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
gmac2: ethernet@37400000 {
status = "ok";
phy-mode = "sgmii";
qcom,id = <2>;
mdiobus = <&mdio0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
&adm_dma {
status = "ok";
};

494
target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
View File

@ -1,494 +0,0 @@
#include "qcom-ipq8064-v2.0.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "TP-Link Archer C2600";
compatible = "tplink,c2600", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
led-boot = &power;
led-failsafe = &general;
led-running = &power;
led-upgrade = &general;
label-mac-device = &gmac2;
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
pinmux@800000 {
button_pins: button_pins {
mux {
pins = "gpio16", "gpio54", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
mux {
pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33",
"gpio53", "gpio66";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
bias-pull-down;
};
data {
pins = "gpio18", "gpio19";
drive-strength = <10>;
};
cs {
pins = "gpio20";
function = "gpio";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio21";
drive-strength = <12>;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
};
usb0_pwr_en_pin: usb0_pwr_en_pin {
mux {
pins = "gpio25";
function = "gpio";
drive-strength = <10>;
bias-pull-up;
output-high;
};
};
usb1_pwr_en_pin: usb1_pwr_en_pin {
mux {
pins = "gpio23";
function = "gpio";
drive-strength = <10>;
bias-pull-up;
output-high;
};
};
};
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
serial@16340000 {
status = "ok";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "ok";
spi5: spi@1a280000 {
status = "ok";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash: m25p80@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
SBL1@0 {
label = "SBL1";
reg = <0x0 0x20000>;
read-only;
};
MIBIB@20000 {
label = "MIBIB";
reg = <0x20000 0x20000>;
read-only;
};
SBL2@40000 {
label = "SBL2";
reg = <0x40000 0x20000>;
read-only;
};
SBL3@60000 {
label = "SBL3";
reg = <0x60000 0x30000>;
read-only;
};
DDRCONFIG@90000 {
label = "DDRCONFIG";
reg = <0x90000 0x10000>;
read-only;
};
SSD@a0000 {
label = "SSD";
reg = <0xa0000 0x10000>;
read-only;
};
TZ@b0000 {
label = "TZ";
reg = <0xb0000 0x30000>;
read-only;
};
RPM@e0000 {
label = "RPM";
reg = <0xe0000 0x20000>;
read-only;
};
fs-uboot@100000 {
label = "fs-uboot";
reg = <0x100000 0x70000>;
read-only;
};
uboot-env@170000 {
label = "uboot-env";
reg = <0x170000 0x40000>;
read-only;
};
radio@1b0000 {
label = "radio";
reg = <0x1b0000 0x40000>;
read-only;
};
os-image@1f0000 {
label = "os-image";
reg = <0x1f0000 0x400000>;
};
rootfs@5f0000 {
label = "rootfs";
reg = <0x5f0000 0x1900000>;
};
defaultmac: default-mac@1ef0000 {
label = "default-mac";
reg = <0x1ef0000 0x00200>;
read-only;
};
pin@1ef0200 {
label = "pin";
reg = <0x1ef0200 0x00200>;
read-only;
};
product-info@1ef0400 {
label = "product-info";
reg = <0x1ef0400 0x0fc00>;
read-only;
};
partition-table@1f00000 {
label = "partition-table";
reg = <0x1f00000 0x10000>;
read-only;
};
soft-version@1f10000 {
label = "soft-version";
reg = <0x1f10000 0x10000>;
read-only;
};
support-list@1f20000 {
label = "support-list";
reg = <0x1f20000 0x10000>;
read-only;
};
profile@1f30000 {
label = "profile";
reg = <0x1f30000 0x10000>;
read-only;
};
default-config@1f40000 {
label = "default-config";
reg = <0x1f40000 0x10000>;
read-only;
};
user-config@1f50000 {
label = "user-config";
reg = <0x1f50000 0x40000>;
read-only;
};
qos-db@1f90000 {
label = "qos-db";
reg = <0x1f90000 0x40000>;
read-only;
};
usb-config@1fd0000 {
label = "usb-config";
reg = <0x1fd0000 0x10000>;
read-only;
};
log@1fe0000 {
label = "log";
reg = <0x1fe0000 0x20000>;
read-only;
};
};
};
};
phy@100f8800 { /* USB3 port 1 HS phy */
status = "ok";
};
phy@100f8830 { /* USB3 port 1 SS phy */
status = "ok";
};
phy@110f8800 { /* USB3 port 0 HS phy */
status = "ok";
};
phy@110f8830 { /* USB3 port 0 SS phy */
status = "ok";
};
usb30@0 {
status = "ok";
pinctrl-0 = <&usb0_pwr_en_pin>;
pinctrl-names = "default";
};
usb30@1 {
status = "ok";
pinctrl-0 = <&usb1_pwr_en_pin>;
pinctrl-names = "default";
};
pcie0: pci@1b500000 {
status = "ok";
};
pcie1: pci@1b700000 {
status = "ok";
force_gen1 = <1>;
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
};
gmac1: ethernet@37200000 {
status = "ok";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mtd-mac-address = <&defaultmac 0x8>;
mtd-mac-address-increment = <1>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
gmac2: ethernet@37400000 {
status = "ok";
phy-mode = "sgmii";
qcom,id = <2>;
mtd-mac-address = <&defaultmac 0x8>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
ledswitch {
label = "ledswitch";
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_LIGHTS_TOGGLE>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
lan {
label = "c2600:white:lan";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
};
usb4 {
label = "c2600:white:usb_4";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb2 {
label = "c2600:white:usb_2";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
wps {
label = "c2600:white:wps";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
wan_amber {
label = "c2600:amber:wan";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
};
wan_white {
label = "c2600:white:wan";
gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
};
power: power {
label = "c2600:white:power";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
general: general {
label = "c2600:white:general";
gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
};
};
};
&adm_dma {
status = "ok";
};

408
target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
View File

@ -1,408 +0,0 @@
#include "qcom-ipq8064-v2.0.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Netgear Nighthawk X4 D7800";
compatible = "netgear,d7800", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0xe000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
led-boot = &power_white;
led-failsafe = &power_amber;
led-running = &power_white;
led-upgrade = &power_amber;
};
chosen {
bootargs = "rootfstype=squashfs noinitrd";
stdout-path = "serial0:115200n8";
};
soc {
pinmux@800000 {
button_pins: button_pins {
mux {
pins = "gpio6", "gpio54", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
"gpio24","gpio26", "gpio53", "gpio64";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
nand_pins: nand_pins {
mux {
pins = "gpio34", "gpio35", "gpio36",
"gpio37", "gpio38", "gpio39",
"gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
function = "nand";
drive-strength = <10>;
bias-disable;
};
pullups {
pins = "gpio39";
bias-pull-up;
};
hold {
pins = "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
bias-bus-hold;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
};
usb0_pwr_en_pins: usb0_pwr_en_pins {
mux {
pins = "gpio15";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
};
usb1_pwr_en_pins: usb1_pwr_en_pins {
mux {
pins = "gpio16", "gpio68";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
};
};
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
serial@16340000 {
status = "ok";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
sata-phy@1b400000 {
status = "ok";
};
sata@29000000 {
ports-implemented = <0x1>;
status = "ok";
};
phy@100f8800 { /* USB3 port 1 HS phy */
status = "ok";
};
phy@100f8830 { /* USB3 port 1 SS phy */
status = "ok";
};
phy@110f8800 { /* USB3 port 0 HS phy */
status = "ok";
};
phy@110f8830 { /* USB3 port 0 SS phy */
status = "ok";
};
usb30@0 {
status = "ok";
pinctrl-0 = <&usb0_pwr_en_pins>;
pinctrl-names = "default";
};
usb30@1 {
status = "ok";
pinctrl-0 = <&usb1_pwr_en_pins>;
pinctrl-names = "default";
};
pcie0: pci@1b500000 {
status = "ok";
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&pcie0_pins>;
pinctrl-names = "default";
};
pcie1: pci@1b700000 {
status = "ok";
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
force_gen1 = <1>;
};
nand@1ac00000 {
status = "ok";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <1>;
cs0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
qcadata@0 {
label = "qcadata";
reg = <0x0000000 0x0c80000>;
read-only;
};
APPSBL@c80000 {
label = "APPSBL";
reg = <0x0c80000 0x0500000>;
read-only;
};
APPSBLENV@1180000 {
label = "APPSBLENV";
reg = <0x1180000 0x0080000>;
read-only;
};
art: art@1200000 {
label = "art";
reg = <0x1200000 0x0140000>;
read-only;
};
artbak: art@1340000 {
label = "artbak";
reg = <0x1340000 0x0140000>;
read-only;
};
kernel@1480000 {
label = "kernel";
reg = <0x1480000 0x0400000>;
};
ubi@1880000 {
label = "ubi";
reg = <0x1880000 0x1C00000>;
};
netgear@3480000 {
label = "netgear";
reg = <0x3480000 0x4480000>;
read-only;
};
reserve@7900000 {
label = "reserve";
reg = <0x7900000 0x0700000>;
read-only;
};
};
};
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
};
gmac1: ethernet@37200000 {
status = "ok";
phy-mode = "rgmii";
phy-handle = <&phy4>;
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mtd-mac-address = <&art 6>;
};
gmac2: ethernet@37400000 {
status = "ok";
phy-mode = "sgmii";
qcom,id = <2>;
mtd-mac-address = <&art 0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
usb1 {
label = "d7800:white:usb1";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb2 {
label = "d7800:white:usb2";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
power_amber: power_amber {
label = "d7800:amber:power";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
wan_white {
label = "d7800:white:wan";
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
wan_amber {
label = "d7800:amber:wan";
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
wps {
label = "d7800:white:wps";
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
};
esata {
label = "d7800:white:esata";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
power_white: power_white {
label = "d7800:white:power";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
wifi {
label = "d7800:white:wifi";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
};
};
&adm_dma {
status = "ok";
};

232
target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-db149.dts
View File

@ -1,232 +0,0 @@
#include "qcom-ipq8064-v1.0.dtsi"
/ {
model = "Qualcomm IPQ8064/DB149";
compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
alias {
serial0 = &uart2;
mdio-gpio0 = &mdio0;
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
pinmux@800000 {
i2c4_pins: i2c4_pinmux {
pins = "gpio12", "gpio13";
function = "gsbi4";
bias-disable;
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
drive-strength = <10>;
bias-none;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
rgmii0_pins: rgmii0_pins {
mux {
pins = "gpio2", "gpio66";
drive-strength = <8>;
bias-disable;
};
};
};
gsbi2: gsbi@12480000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
uart2: serial@12490000 {
status = "ok";
};
};
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "ok";
spi4: spi@1a280000 {
status = "ok";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 0>;
flash: m25p80@0 {
compatible = "s25fl256s1";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
m25p,fast-read;
partition@0 {
label = "lowlevel_init";
reg = <0x0 0x1b0000>;
};
partition@1 {
label = "u-boot";
reg = <0x1b0000 0x80000>;
};
partition@2 {
label = "u-boot-env";
reg = <0x230000 0x40000>;
};
partition@3 {
label = "caldata";
reg = <0x270000 0x40000>;
};
partition@4 {
label = "firmware";
reg = <0x2b0000 0x1d50000>;
};
};
};
};
sata-phy@1b400000 {
status = "ok";
};
sata@29000000 {
status = "ok";
};
phy@100f8800 { /* USB3 port 1 HS phy */
status = "ok";
};
phy@100f8830 { /* USB3 port 1 SS phy */
status = "ok";
};
phy@110f8800 { /* USB3 port 0 HS phy */
status = "ok";
};
phy@110f8830 { /* USB3 port 0 SS phy */
status = "ok";
};
usb30@0 {
status = "ok";
};
usb30@1 {
status = "ok";
};
pcie0: pci@1b500000 {
status = "ok";
};
pcie1: pci@1b700000 {
status = "ok";
};
pcie2: pci@1b900000 {
status = "ok";
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
phy6: ethernet-phy@6 {
reg = <6>;
};
phy7: ethernet-phy@7 {
reg = <7>;
};
};
gmac0: ethernet@37000000 {
status = "ok";
phy-mode = "rgmii";
qcom,id = <0>;
phy-handle = <&phy4>;
pinctrl-0 = <&rgmii0_pins>;
pinctrl-names = "default";
};
gmac1: ethernet@37200000 {
status = "ok";
phy-mode = "sgmii";
qcom,id = <1>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
gmac2: ethernet@37400000 {
status = "ok";
phy-mode = "sgmii";
qcom,id = <2>;
phy-handle = <&phy6>;
};
gmac3: ethernet@37600000 {
status = "ok";
phy-mode = "sgmii";
qcom,id = <3>;
phy-handle = <&phy7>;
};
};
};

400
target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
View File

@ -1,400 +0,0 @@
#include "qcom-ipq8064-v2.0.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Linksys EA8500 WiFi Router";
compatible = "linksys,ea8500", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
chosen {
bootargs = "console=ttyMSM0,115200n8";
stdout-path = "serial0:115200n8";
append-rootblock = "ubi.mtd="; /* append to bootargs adding the root deviceblock nbr from bootloader */
};
soc {
pinmux@800000 {
button_pins: button_pins {
mux {
pins = "gpio65", "gpio67", "gpio68";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
mux {
pins = "gpio6", "gpio53", "gpio54";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
nand_pins: nand_pins {
mux {
pins = "gpio34", "gpio35", "gpio36",
"gpio37", "gpio38", "gpio39",
"gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
function = "nand";
drive-strength = <10>;
bias-disable;
};
pullups {
pins = "gpio39";
bias-pull-up;
};
hold {
pins = "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
bias-bus-hold;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
};
};
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
serial@16340000 {
status = "ok";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
sata-phy@1b400000 {
status = "ok";
};
sata@29000000 {
status = "ok";
};
phy@100f8800 { /* USB3 port 1 HS phy */
status = "ok";
};
phy@100f8830 { /* USB3 port 1 SS phy */
status = "ok";
};
phy@110f8800 { /* USB3 port 0 HS phy */
status = "ok";
};
phy@110f8830 { /* USB3 port 0 SS phy */
status = "ok";
};
usb30@0 {
status = "ok";
};
usb30@1 {
status = "ok";
};
pcie0: pci@1b500000 {
status = "ok";
force_gen1 = <1>;
};
pcie1: pci@1b700000 {
status = "ok";
};
pcie2: pci@1b900000 {
status = "ok";
};
nand@1ac00000 {
status = "ok";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
cs0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
SBL1@0 {
label = "SBL1";
reg = <0x0000000 0x0040000>;
read-only;
};
MIBIB@40000 {
label = "MIBIB";
reg = <0x0040000 0x0140000>;
read-only;
};
SBL2@180000 {
label = "SBL2";
reg = <0x0180000 0x0140000>;
read-only;
};
SBL3@2c0000 {
label = "SBL3";
reg = <0x02c0000 0x0280000>;
read-only;
};
DDRCONFIG@540000 {
label = "DDRCONFIG";
reg = <0x0540000 0x0120000>;
read-only;
};
SSD@660000 {
label = "SSD";
reg = <0x0660000 0x0120000>;
read-only;
};
TZ@780000 {
label = "TZ";
reg = <0x0780000 0x0280000>;
read-only;
};
RPM@a00000 {
label = "RPM";
reg = <0x0a00000 0x0280000>;
read-only;
};
art: art@c80000 {
label = "art";
reg = <0x0c80000 0x0140000>;
read-only;
};
APPSBL@dc0000 {
label = "APPSBL";
reg = <0x0dc0000 0x0100000>;
read-only;
};
u_env@ec0000 {
label = "u_env";
reg = <0x0ec0000 0x0040000>;
};
s_env@f00000 {
label = "s_env";
reg = <0x0f00000 0x0040000>;
};
devinfo@f40000 {
label = "devinfo";
reg = <0x0f40000 0x0040000>;
};
linux@f80000 {
label = "kernel1";
reg = <0x0f80000 0x2800000>; /* 3 MB spill to rootfs*/
};
rootfs@1280000 {
label = "rootfs1";
reg = <0x1280000 0x2500000>;
};
linux2@3780000 {
label = "kernel2";
reg = <0x3780000 0x2800000>;
};
rootfs2@3a80000 {
label = "rootfs2";
reg = <0x3a80000 0x2500000>;
};
syscfg@5f80000 {
label = "syscfg";
reg = <0x5f80000 0x2080000>;
};
};
};
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x00010 0x2613a0 /* PWS_REG */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
};
gmac1: ethernet@37200000 {
status = "ok";
phy-mode = "rgmii";
qcom,id = <1>;
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <1>;
qcom,rgmii_delay = <0>;
qcom,emulation = <0>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
fixed-link {
speed = <1000>;
full-duplex;
};
};
//lan
gmac2: ethernet@37400000 {
status = "ok";
phy-mode = "sgmii";
qcom,id = <2>;
qcom,phy_mdio_addr = <0>; /* none */
qcom,poll_required = <0>; /* no polling */
qcom,rgmii_delay = <0>;
qcom,emulation = <0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
adm_dma: dma@18300000 {
status = "ok";
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART >;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
wps {
label = "ea8500:green:wps";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
};
power: power {
label = "ea8500:white:power";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
wifi {
label = "ea8500:green:wifi";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
};
};
};

401
target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-mtfi-m520.dts
View File

@ -1,401 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq8064-v2.0.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Ruijie RG-MTFi-M520";
compatible = "ruijie,rg-mtfi-m520", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x7e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
sdcc1 = &sdcc1;
};
chosen {
bootargs = "root=/dev/mmcblk0p3 rootfstype=squashfs,ext4 rootwait noinitrd";
stdout-path = "serial0:115200n8";
};
soc {
pinmux@800000 {
button_pins: button_pins {
mux {
pins = "gpio54";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio53";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
clk {
pins = "gpio1";
input-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62";
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
tx {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32";
input-disable;
};
};
sdcc1_pins: sdcc1_pinmux {
mux {
pins = "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45", "gpio46", "gpio47";
function = "sdc1";
};
cmd {
pins = "gpio45";
drive-strength = <10>;
bias-pull-up;
};
data {
pins = "gpio38", "gpio39", "gpio40", "gpio41",
"gpio43", "gpio44", "gpio46", "gpio47";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio42";
drive-strength = <16>;
bias-disable;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
drive-strength = <10>;
bias-none;
};
cs {
pins = "gpio20";
drive-strength = <12>;
};
};
};
gsbi2: gsbi@12480000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
i2c@124a0000 {
status = "ok";
lm75@48 {
status = "okay";
compatible = "lm75";
reg = <0x48>;
};
pcf8563: rtc@51 {
status = "okay";
compatible = "nxp,pcf8563";
reg = <0x51>;
};
tca9539@74 {
status = "okay";
compatible = "ti,tca9539";
reg = <0x74>;
};
};
};
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
serial@16340000 {
status = "ok";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "ok";
spi4: spi@1a280000 {
status = "ok";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash: m25p80@0 {
compatible = "s25fl256s1";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
SBL1@0 {
label = "SBL1";
reg = <0x0 0x10000>;
read-only;
};
MIBIB@10000 {
label = "MIBIB";
reg = <0x10000 0x10000>;
read-only;
};
SBL2@20000 {
label = "SBL2";
reg = <0x20000 0x20000>;
read-only;
};
SBL3@40000 {
label = "SBL3";
reg = <0x40000 0x30000>;
read-only;
};
DDRCONFIG@70000 {
label = "DDRCONFIG";
reg = <0x70000 0x10000>;
read-only;
};
PRODUCTINFO: PRODUCTINFO@80000 {
label = "PRODUCTINFO";
reg = <0x80000 0x10000>;
read-only;
};
TZ@90000 {
label = "TZ";
reg = <0x90000 0x30000>;
read-only;
};
RPM@c0000 {
label = "RPM";
reg = <0xc0000 0x20000>;
read-only;
};
APPSBL@e0000 {
label = "APPSBL";
reg = <0xe0000 0x80000>;
read-only;
};
APPSBLENV@160000 {
label = "APPSBLENV";
reg = <0x160000 0x10000>;
read-only;
};
BOOTCONFIG@170000 {
label = "BOOTCONFIG";
reg = <0x170000 0x10000>;
read-only;
};
ART@180000 {
label = "ART";
reg = <0x180000 0x40000>;
read-only;
};
};
};
};
sata-phy@1b400000 {
status = "ok";
};
sata@29000000 {
ports-implemented = <0x1>;
status = "ok";
};
phy@100f8800 { /* USB3 port 1 HS phy */
status = "ok";
};
phy@100f8830 { /* USB3 port 1 SS phy */
status = "ok";
};
phy@110f8800 { /* USB3 port 0 HS phy */
status = "ok";
};
phy@110f8830 { /* USB3 port 0 SS phy */
status = "ok";
};
usb30@0 {
status = "ok";
};
usb30@1 {
status = "ok";
};
pcie0: pci@1b500000 {
status = "ok";
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie0_pins>;
pinctrl-names = "default";
};
pcie1: pci@1b700000 {
status = "ok";
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
force_gen1 = <1>;
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
};
gmac1: ethernet@37200000 {
status = "ok";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mtd-mac-address-ascii = <&PRODUCTINFO 0x86a>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
gmac2: ethernet@37400000 {
status = "ok";
phy-mode = "sgmii";
qcom,id = <2>;
mtd-mac-address-ascii = <&PRODUCTINFO 0x86a>;
mtd-mac-address-increment = <1>;
mtd-mac-address-increment-byte = <0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
amba {
sdcc1: sdcc@12400000 {
status = "okay";
pinctrl-0 = <&sdcc1_pins>;
pinctrl-names = "default";
};
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&adm_dma {
status = "ok";
};

382
target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
View File

@ -1,382 +0,0 @@
#include "qcom-ipq8064-v1.0.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "Netgear Nighthawk X4 R7500";
compatible = "netgear,r7500", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0xe000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
led-boot = &power_white;
led-failsafe = &power_amber;
led-running = &power_white;
led-upgrade = &power_amber;
};
chosen {
bootargs = "rootfstype=squashfs noinitrd";
stdout-path = "serial0:115200n8";
};
soc {
pinmux@800000 {
button_pins: button_pins {
mux {
pins = "gpio6", "gpio54", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
"gpio24","gpio26", "gpio53", "gpio64";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
nand_pins: nand_pins {
mux {
pins = "gpio34", "gpio35", "gpio36",
"gpio37", "gpio38", "gpio39",
"gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
function = "nand";
drive-strength = <10>;
bias-disable;
};
pullups {
pins = "gpio39";
bias-pull-up;
};
hold {
pins = "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
bias-bus-hold;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
};
};
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
serial@16340000 {
status = "ok";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
sata-phy@1b400000 {
status = "ok";
};
sata@29000000 {
status = "ok";
};
phy@100f8800 { /* USB3 port 1 HS phy */
clocks = <&gcc USB30_0_UTMI_CLK>;
status = "ok";
};
phy@100f8830 { /* USB3 port 1 SS phy */
clocks = <&gcc USB30_0_MASTER_CLK>;
status = "ok";
};
phy@110f8800 { /* USB3 port 0 HS phy */
clocks = <&gcc USB30_1_UTMI_CLK>;
status = "ok";
};
phy@110f8830 { /* USB3 port 0 SS phy */
clocks = <&gcc USB30_1_MASTER_CLK>;
status = "ok";
};
usb30@0 {
clocks = <&gcc USB30_1_MASTER_CLK>;
status = "ok";
};
usb30@1 {
clocks = <&gcc USB30_0_MASTER_CLK>;
status = "ok";
};
pcie0: pci@1b500000 {
status = "ok";
};
pcie1: pci@1b700000 {
status = "ok";
force_gen1 = <1>;
};
nand@1ac00000 {
status = "ok";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
cs0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
qcadata@0 {
label = "qcadata";
reg = <0x0000000 0x0c80000>;
read-only;
};
APPSBL@c80000 {
label = "APPSBL";
reg = <0x0c80000 0x0500000>;
read-only;
};
APPSBLENV@1180000 {
label = "APPSBLENV";
reg = <0x1180000 0x0080000>;
read-only;
};
art: art@1200000 {
label = "art";
reg = <0x1200000 0x0140000>;
read-only;
};
kernel@1340000 {
label = "kernel";
reg = <0x1340000 0x0400000>;
};
ubi@1740000 {
label = "ubi";
reg = <0x1740000 0x1600000>;
};
netgear@2d40000 {
label = "netgear";
reg = <0x2d40000 0x0c00000>;
read-only;
};
reserve@3940000 {
label = "reserve";
reg = <0x3940000 0x46c0000>;
read-only;
};
};
};
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
};
gmac1: ethernet@37200000 {
status = "ok";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mtd-mac-address = <&art 6>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
gmac2: ethernet@37400000 {
status = "ok";
phy-mode = "sgmii";
qcom,id = <2>;
mtd-mac-address = <&art 0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
usb1 {
label = "r7500:white:usb1";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb2 {
label = "r7500:white:usb2";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
power_amber: power_amber {
label = "r7500:amber:power";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
wan_white {
label = "r7500:white:wan";
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
wan_amber {
label = "r7500:amber:wan";
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
wps {
label = "r7500:white:wps";
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
};
esata {
label = "r7500:white:esata";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
power_white: power_white {
label = "r7500:white:power";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
wifi {
label = "r7500:white:wifi";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
};
};
&tcsr {
qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
compatible = "qcom,tcsr";
};
&adm_dma {
status = "ok";
};

407
target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
View File

@ -1,407 +0,0 @@
#include "qcom-ipq8064-v2.0.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Netgear Nighthawk X4 R7500v2";
compatible = "netgear,r7500v2", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
rsvd@5fe00000 {
reg = <0x5fe00000 0x200000>;
reusable;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
chosen {
bootargs = "rootfstype=squashfs noinitrd";
stdout-path = "serial0:115200n8";
};
soc {
pinmux@800000 {
button_pins: button_pins {
mux {
pins = "gpio6", "gpio54", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
"gpio24","gpio26", "gpio53", "gpio64";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
nand_pins: nand_pins {
mux {
pins = "gpio34", "gpio35", "gpio36",
"gpio37", "gpio38", "gpio39",
"gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
function = "nand";
drive-strength = <10>;
bias-disable;
};
pullups {
pins = "gpio39";
bias-pull-up;
};
hold {
pins = "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
bias-bus-hold;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
};
usb0_pwr_en_pins: usb0_pwr_en_pins {
mux {
pins = "gpio15";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
};
usb1_pwr_en_pins: usb1_pwr_en_pins {
mux {
pins = "gpio16", "gpio68";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
};
};
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
serial@16340000 {
status = "ok";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
sata-phy@1b400000 {
status = "ok";
};
sata@29000000 {
status = "ok";
};
phy@100f8800 { /* USB3 port 1 HS phy */
status = "ok";
};
phy@100f8830 { /* USB3 port 1 SS phy */
status = "ok";
};
phy@110f8800 { /* USB3 port 0 HS phy */
status = "ok";
};
phy@110f8830 { /* USB3 port 0 SS phy */
status = "ok";
};
usb30@0 {
status = "ok";
pinctrl-0 = <&usb0_pwr_en_pins>;
pinctrl-names = "default";
};
usb30@1 {
status = "ok";
pinctrl-0 = <&usb1_pwr_en_pins>;
pinctrl-names = "default";
};
pcie0: pci@1b500000 {
status = "ok";
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie0_pins>;
pinctrl-names = "default";
};
pcie1: pci@1b700000 {
status = "ok";
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
force_gen1 = <1>;
};
nand@1ac00000 {
status = "ok";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
cs0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
qcadata@0 {
label = "qcadata";
reg = <0x0000000 0x0c80000>;
read-only;
};
APPSBL@c80000 {
label = "APPSBL";
reg = <0x0c80000 0x0500000>;
read-only;
};
APPSBLENV@1180000 {
label = "APPSBLENV";
reg = <0x1180000 0x0080000>;
read-only;
};
art: art@1200000 {
label = "art";
reg = <0x1200000 0x0140000>;
read-only;
};
artbak: art@1340000 {
label = "artbak";
reg = <0x1340000 0x0140000>;
read-only;
};
kernel@1480000 {
label = "kernel";
reg = <0x1480000 0x0400000>;
};
ubi@1880000 {
label = "ubi";
reg = <0x1880000 0x6080000>;
};
reserve@7900000 {
label = "reserve";
reg = <0x7900000 0x0700000>;
read-only;
};
};
};
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0xaa545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
};
gmac1: ethernet@37200000 {
status = "ok";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mtd-mac-address = <&art 6>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
gmac2: ethernet@37400000 {
status = "ok";
phy-mode = "sgmii";
qcom,id = <2>;
mtd-mac-address = <&art 0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
usb1 {
label = "r7500v2:amber:usb1";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb3 {
label = "r7500v2:amber:usb3";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
status {
label = "r7500v2:amber:status";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
internet {
label = "r7500v2:white:internet";
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
wan {
label = "r7500v2:white:wan";
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
wps {
label = "r7500v2:white:wps";
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
};
esata {
label = "r7500v2:white:esata";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
power: power {
label = "r7500v2:white:power";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
wifi {
label = "r7500v2:white:wifi";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
};
};
&adm_dma {
status = "ok";
};

30
target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
View File

@ -1,30 +0,0 @@
#include "qcom-ipq8064-v1.0.dtsi"
/ {
soc: soc {
ss_phy_0: phy@110f8830 {
rx_eq = <2>;
tx_deamp_3_5db = <32>;
mpll = <0xa0>;
};
ss_phy_1: phy@100f8830 {
rx_eq = <2>;
tx_deamp_3_5db = <32>;
mpll = <0xa0>;
};
pcie0: pci@1b500000 {
phy-tx0-term-offset = <0>;
};
pcie1: pci@1b700000 {
phy-tx0-term-offset = <0>;
};
pcie2: pci@1b900000 {
phy-tx0-term-offset = <0>;
};
};
};

417
target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
View File

@ -1,417 +0,0 @@
#include "qcom-ipq8064-v2.0.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "TP-Link Archer VR2600v";
compatible = "tplink,vr2600v", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
led-boot = &power;
led-failsafe = &general;
led-running = &power;
led-upgrade = &general;
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
pinmux@800000 {
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17",
"gpio26", "gpio53", "gpio56", "gpio66";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
button_pins: button_pins {
mux {
pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
bias-pull-down;
};
data {
pins = "gpio18", "gpio19";
drive-strength = <10>;
};
cs {
pins = "gpio20";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio21";
drive-strength = <12>;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
};
};
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
serial@16340000 {
status = "ok";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "ok";
spi4: spi@1a280000 {
status = "ok";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash: W25Q128@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
SBL1@0 {
label = "SBL1";
reg = <0x0 0x20000>;
read-only;
};
MIBIB@20000 {
label = "MIBIB";
reg = <0x20000 0x20000>;
read-only;
};
SBL2@40000 {
label = "SBL2";
reg = <0x40000 0x40000>;
read-only;
};
SBL3@80000 {
label = "SBL3";
reg = <0x80000 0x80000>;
read-only;
};
DDRCONFIG@100000 {
label = "DDRCONFIG";
reg = <0x100000 0x10000>;
read-only;
};
SSD@110000 {
label = "SSD";
reg = <0x110000 0x10000>;
read-only;
};
TZ@120000 {
label = "TZ";
reg = <0x120000 0x80000>;
read-only;
};
RPM@1a0000 {
label = "RPM";
reg = <0x1a0000 0x80000>;
read-only;
};
APPSBL@220000 {
label = "APPSBL";
reg = <0x220000 0x80000>;
read-only;
};
APPSBLENV@2a0000 {
label = "APPSBLENV";
reg = <0x2a0000 0x40000>;
read-only;
};
OLDART@2e0000 {
label = "OLDART";
reg = <0x2e0000 0x40000>;
read-only;
};
kernel@320000 {
label = "kernel";
reg = <0x320000 0x300000>;
};
rootfs@620000 {
label = "rootfs";
reg = <0x620000 0x960000>;
};
defaultmac: default-mac@0xfaf100 {
label = "default-mac";
reg = <0xfaf100 0x00200>;
read-only;
};
ART@fc0000 {
label = "ART";
reg = <0xfc0000 0x40000>;
read-only;
};
};
};
};
phy@100f8800 { /* USB3 port 1 HS phy */
status = "ok";
};
phy@100f8830 { /* USB3 port 1 SS phy */
status = "ok";
};
phy@110f8800 { /* USB3 port 0 HS phy */
status = "ok";
};
phy@110f8830 { /* USB3 port 0 SS phy */
status = "ok";
};
usb30@0 {
status = "ok";
};
usb30@1 {
status = "ok";
};
pcie0: pci@1b500000 {
status = "ok";
};
pcie1: pci@1b700000 {
status = "ok";
force_gen1 = <1>;
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
};
gmac1: ethernet@37200000 {
status = "ok";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mtd-mac-address = <&defaultmac 0>;
mtd-mac-address-increment = <1>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
gmac2: ethernet@37400000 {
status = "ok";
phy-mode = "sgmii";
qcom,id = <2>;
mtd-mac-address = <&defaultmac 0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
dect {
label = "dect";
gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PHONE>;
};
ledswitch {
label = "ledswitch";
gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
linux,code = <KEY_LIGHTS_TOGGLE>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
dsl {
label = "vr2600v:white:dsl";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb {
label = "vr2600v:white:usb";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
lan {
label = "vr2600v:white:lan";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
wlan2g {
label = "vr2600v:white:wlan2g";
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
};
wlan5g {
label = "vr2600v:white:wlan5g";
gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
};
power: power {
label = "vr2600v:white:power";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
phone {
label = "vr2600v:white:phone";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
};
wan {
label = "vr2600v:white:wan";
gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
};
general: general {
label = "vr2600v:white:general";
gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
};
};
};
&adm_dma {
status = "ok";
};

442
target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts
View File

@ -1,442 +0,0 @@
#include "qcom-ipq8064-v2.0.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "NEC Aterm WG2600HP";
compatible = "nec,wg2600hp", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-upgrade = &power_green;
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x06000000 /* PAD0_MODE */
0x0000c 0x00080080 /* PAD6_MODE */
0x000e4 0x0006a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x0000004e /* PORT0_STATUS */
0x00094 0x0000004e /* PORT6_STATUS */
>;
};
ethernet-phy@4 {
reg = <4>;
};
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wps {
label = "wps";
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
bridge {
label = "bridge";
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
converter {
label = "converter";
gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
converter_green {
label = "wg2600hp:green:converter";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
};
power_red: power_red {
label = "wg2600hp:red:power";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
active_green {
label = "wg2600hp:green:active";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
active_red {
label = "wg2600hp:red:active";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
power_green: power_green {
label = "wg2600hp:green:power";
gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
};
converter_red {
label = "wg2600hp:red:converter";
gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
};
wlan2g_green {
label = "wg2600hp:green:wlan2g";
gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
};
wlan2g_red {
label = "wg2600hp:red:wlan2g";
gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
};
wlan5g_green {
label = "wg2600hp:green:wlan5g";
gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
};
wlan5g_red {
label = "wg2600hp:red:wlan5g";
gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>;
};
tv_green {
label = "wg2600hp:green:tv";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
tv_red {
label = "wg2600hp:red:tv";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_HIGH>;
};
};
};
&adm_dma {
status = "okay";
};
&gmac1 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mtd-mac-address = <&PRODUCTDATA 6>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
mtd-mac-address = <&PRODUCTDATA 0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gsbi4 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
};
&gsbi4_serial {
status = "okay";
};
&gsbi5 {
status = "okay";
qcom,mode = <GSBI_PROT_SPI>;
spi@1a280000 {
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
SBL1@0 {
label = "SBL1";
reg = <0x0 0x20000>;
read-only;
};
MIBIB@20000 {
label = "MIBIB";
reg = <0x20000 0x20000>;
read-only;
};
SBL2@40000 {
label = "SBL2";
reg = <0x40000 0x40000>;
read-only;
};
SBL3@80000 {
label = "SBL3";
reg = <0x80000 0x80000>;
read-only;
};
DDRCONFIG@100000 {
label = "DDRCONFIG";
reg = <0x100000 0x10000>;
read-only;
};
SSD@110000 {
label = "SSD";
reg = <0x110000 0x10000>;
read-only;
};
TZ@120000 {
label = "TZ";
reg = <0x120000 0x80000>;
read-only;
};
RPM@1a0000 {
label = "RPM";
reg = <0x1a0000 0x80000>;
read-only;
};
APPSBL@220000 {
label = "APPSBL";
reg = <0x220000 0x80000>;
read-only;
};
APPSBLENV@2a0000 {
label = "APPSBLENV";
reg = <0x2a0000 0x10000>;
};
PRODUCTDATA: PRODUCTDATA@2b0000 {
label = "PRODUCTDATA";
reg = <0x2b0000 0x30000>;
read-only;
};
ART@2e0000 {
label = "ART";
reg = <0x2e0000 0x40000>;
read-only;
};
TP@320000 {
label = "TP";
reg = <0x320000 0x40000>;
read-only;
};
TINY@360000 {
label = "TINY";
reg = <0x360000 0x500000>;
read-only;
};
firmware@860000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x860000 0x17a0000>;
};
};
};
};
};
&hs_phy_0 { /* USB3 port 0 HS phy */
status = "okay";
};
&ss_phy_0 { /* USB3 port 0 SS phy */
status = "okay";
};
&hs_phy_1 { /* USB3 port 1 HS phy */
status = "okay";
};
&ss_phy_1 { /* USB3 port 1 SS phy */
status = "okay";
};
&usb3_0 {
status = "okay";
pinctrl-0 = <&usb_pwr_en_pins>;
pinctrl-names = "default";
};
&usb3_1 {
status = "okay";
};
&pcie0 {
status = "okay";
};
&pcie1 {
status = "okay";
force_gen1 = <1>;
};
&qcom_pinmux {
button_pins: button_pins {
mux {
pins = "gpio16", "gpio54", "gpio24", "gpio25";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
mux {
pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio14",
"gpio15", "gpio55", "gpio56", "gpio57", "gpio58",
"gpio64", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
bias-pull-down;
};
data {
pins = "gpio18", "gpio19";
drive-strength = <10>;
};
cs {
pins = "gpio20";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio21";
drive-strength = <12>;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
};
usb_pwr_en_pins: usb_pwr_en_pins {
mux {
pins = "gpio22";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
output-high;
};
};
};

568
target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts
View File

@ -1,568 +0,0 @@
/*
* BSD LICENSE
*
* Copyright (C) 2017 Christian Mehlis <christian@m3hlis.de>
* Copyright (C) 2018 Mathias Kresin <dev@kresin.me>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of any
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "qcom-ipq8064-v1.0.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
compatible = "compex,wpq864", "qcom,ipq8064";
model = "Compex WPQ864";
aliases {
mdio-gpio0 = &mdio0;
serial0 = &gsbi4_serial;
ethernet0 = &gmac1;
ethernet1 = &gmac0;
led-boot = &led_pass;
led-failsafe = &led_fail;
led-running = &led_pass;
led-upgrade = &led_pass;
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
rpm@108000 {
pinctrl-0 = <&rpm_pins>;
pinctrl-names = "default";
};
nand@1ac00000 {
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
mt29f2g08abbeah4@0 {
compatible = "qcom,nandcs";
reg = <0>;
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
SBL1@0 {
label = "SBL1";
reg = <0x0000000 0x0040000>;
read-only;
};
MIBIB@40000 {
label = "MIBIB";
reg = <0x0040000 0x0140000>;
read-only;
};
SBL2@180000 {
label = "SBL2";
reg = <0x0180000 0x0140000>;
read-only;
};
SBL3@2c0000 {
label = "SBL3";
reg = <0x02c0000 0x0280000>;
read-only;
};
DDRCONFIG@540000 {
label = "DDRCONFIG";
reg = <0x0540000 0x0120000>;
read-only;
};
SSD@660000 {
label = "SSD";
reg = <0x0660000 0x0120000>;
read-only;
};
TZ@780000 {
label = "TZ";
reg = <0x0780000 0x0280000>;
read-only;
};
RPM@a00000 {
label = "RPM";
reg = <0x0a00000 0x0280000>;
read-only;
};
APPSBL@c80000 {
label = "APPSBL";
reg = <0x0c80000 0x0500000>;
read-only;
};
APPSBLENV@1180000 {
label = "APPSBLENV";
reg = <0x1180000 0x0080000>;
};
ART@1200000 {
label = "ART";
reg = <0x1200000 0x0140000>;
};
ubi@1340000 {
label = "ubi";
reg = <0x1340000 0x4000000>;
};
BOOTCONFIG@5340000 {
label = "BOOTCONFIG";
reg = <0x5340000 0x0060000>;
};
SBL2-1@53a0000- {
label = "SBL2_1";
reg = <0x53a0000 0x0140000>;
read-only;
};
SBL3-1@54e0000 {
label = "SBL3_1";
reg = <0x54e0000 0x0280000>;
read-only;
};
DDRCONFIG-1@5760000 {
label = "DDRCONFIG_1";
reg = <0x5760000 0x0120000>;
read-only;
};
SSD-1@5880000 {
label = "SSD_1";
reg = <0x5880000 0x0120000>;
read-only;
};
TZ-1@59a0000 {
label = "TZ_1";
reg = <0x59a0000 0x0280000>;
read-only;
};
RPM-1@5c20000 {
label = "RPM_1";
reg = <0x5c20000 0x0280000>;
read-only;
};
BOOTCONFIG1@5ea0000 {
label = "BOOTCONFIG1";
reg = <0x5ea0000 0x0060000>;
};
APPSBL-1@5f00000 {
label = "APPSBL_1";
reg = <0x5f00000 0x0500000>;
read-only;
};
ubi-1@6400000 {
label = "ubi_1";
reg = <0x6400000 0x4000000>;
};
unused@a400000 {
label = "unused";
reg = <0xa400000 0x5c00000>;
};
};
};
};
};
mdio0: mdio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "virtual,mdio-gpio";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
ethernet-phy@4 {
reg = <4>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
rss4 {
label = "wpq864:green:rss4";
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
rss3 {
label = "wpq864:green:rss3";
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
rss2 {
label = "wpq864:orange:rss2";
gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
};
rss1 {
label = "wpq864:red:rss1";
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
led_pass: pass {
label = "wpq864:green:pass";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
};
led_fail: fail {
label = "wpq864:green:fail";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
usb {
label = "wpq864:green:usb";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb-pcie {
label = "wpq864:green:usb-pcie";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
beeper {
compatible = "gpio-beeper";
pinctrl-0 = <&beeper_pins>;
pinctrl-names = "default";
gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
};
};
&adm_dma {
status = "okay";
};
&gmac1 {
status = "okay";
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
phy-mode = "rgmii";
qcom,id = <1>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gsbi4 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
};
&gsbi4_serial {
status = "okay";
pinctrl-0 = <&uart0_pins>;
pinctrl-names = "default";
};
&gsbi5 {
status = "okay";
qcom,mode = <GSBI_PROT_SPI>;
spi@1a280000 {
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
s25fl256s1@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
spi-max-frequency = <50000000>;
};
};
};
&hs_phy_0 { /* USB3 port 0 HS phy */
status = "okay";
};
&hs_phy_1 { /* USB3 port 1 HS phy */
status = "okay";
};
&ss_phy_0 { /* USB3 port 0 SS phy */
status = "okay";
rx_eq = <2>;
tx_deamp_3_5db = <32>;
mpll = <160>;
};
&ss_phy_1 { /* USB3 port 1 SS phy */
status = "okay";
rx_eq = <2>;
tx_deamp_3_5db = <32>;
mpll = <160>;
};
&pcie0 {
status = "okay";
/delete-property/ pinctrl-0;
/delete-property/ pinctrl-names;
/delete-property/ perst-gpios;
};
&pcie1 {
status = "okay";
};
&pcie2 {
status = "okay";
/delete-property/ pinctrl-0;
/delete-property/ pinctrl-names;
/delete-property/ perst-gpios;
};
&qcom_pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinctrl0 {
pcie0_pcie2_perst {
pins = "gpio3";
function = "gpio";
drive-strength = <2>;
bias-disable;
output-high;
};
};
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio22",
"gpio23", "gpio24", "gpio25", "gpio53";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
button_pins: button_pins {
mux {
pins = "gpio54";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
beeper_pins: beeper_pins {
mux {
pins = "gpio55";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
rpm_pins: rpm_pins {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <10>;
bias-disable;
};
};
uart0_pins: uart0_pins {
mux {
pins = "gpio10", "gpio11";
function = "gsbi4";
drive-strength = <10>;
bias-disable;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19";
function = "gsbi5";
drive-strength = <10>;
bias-pull-down;
};
clk {
pins = "gpio21";
function = "gsbi5";
drive-strength = <12>;
bias-pull-down;
};
cs {
pins = "gpio20";
function = "gpio";
drive-strength = <10>;
bias-pull-up;
};
};
nand_pins: nand_pins {
mux {
pins = "gpio34", "gpio35", "gpio36", "gpio37",
"gpio38", "gpio39", "gpio40", "gpio41",
"gpio42", "gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
function = "nand";
drive-strength = <10>;
bias-disable;
};
pullups {
pins = "gpio39";
bias-pull-up;
};
hold {
pins = "gpio40", "gpio41", "gpio42", "gpio43",
"gpio44", "gpio45", "gpio46", "gpio47";
bias-bus-hold;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30",
"gpio31", "gpio32", "gpio51", "gpio52",
"gpio59", "gpio60", "gpio61", "gpio62";
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
};
};
&usb3_0 {
status = "okay";
};
&usb3_1 {
status = "okay";
};
&tcsr {
qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
};

535
target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
View File

@ -1,535 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq8064-v2.0.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Buffalo WXR-2533DHP";
compatible = "buffalo,wxr-2533dhp", "qcom,ipq8064";
memory@42000000 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
serial0 = &gsbi4_serial;
led-boot = &power;
led-failsafe = &diag;
led-running = &power;
led-upgrade = &power;
};
chosen {
/* use "ubi_rootfs" volume in "ubi" partition as rootfs */
bootargs = "ubi.block=0,1 root=/dev/ubiblock0_1 rootfstype=squashfs";
stdout-path = "serial0:115200n8";
};
soc {
nand@1ac00000 {
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
cs@0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
ubi@0 {
label = "ubi";
reg = <0x0000000 0x4000000>;
};
rootfs_1@4000000 {
label = "rootfs_1";
reg = <0x4000000 0x4000000>;
};
};
};
};
mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x07600000 /* PAD0_MODE */
0x00008 0x01000000 /* PAD5_MODE */
0x0000c 0x00000080 /* PAD6_MODE */
0x00050 0xcc35cc35 /* LED_CTRL0 */
0x00054 0xca35ca35 /* LED_CTRL1 */
0x00058 0xc935c935 /* LED_CTRL2 */
0x0005c 0x03ffff00 /* LED_CTRL3 */
0x000e4 0x0006a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x0000007e /* PORT0_STATUS */
0x00094 0x0000007e /* PORT6_STATUS */
>;
};
ethernet-phy@4 {
reg = <4>;
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
usb {
label = "wxr-2533dhp:green:usb";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "usbport";
trigger-sources = <&hub_port0 &hub_port1>;
};
guestport {
label = "wxr-2533dhp:green:guestport";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
diag: diag {
label = "wxr-2533dhp:orange:diag";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
internet_orange {
label = "wxr-2533dhp:orange:internet";
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
};
internet_white {
label = "wxr-2533dhp:white:internet";
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
wireless_orange {
label = "wxr-2533dhp:orange:wireless";
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
wireless_white {
label = "wxr-2533dhp:white:wireless";
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
};
router_orange {
label = "wxr-2533dhp:orange:router";
gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
};
router_white {
label = "wxr-2533dhp:white:router";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
};
power: power {
label = "wxr-2533dhp:white:power";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
power {
label = "power";
gpios = <&qcom_pinmux 58 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
eject {
label = "eject";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_EJECTCD>;
};
guest {
label = "guest";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
ap {
label = "ap";
gpios = <&qcom_pinmux 55 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
linux,input-type = <EV_SW>;
};
router {
label = "router";
gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
linux,input-type = <EV_SW>;
};
auto {
label = "auto";
gpios = <&qcom_pinmux 57 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
linux,input-type = <EV_SW>;
};
};
};
&adm_dma {
status = "okay";
};
&gmac1 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mtd-mac-address = <&ART 6>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "ok";
phy-mode = "sgmii";
qcom,id = <2>;
mtd-mac-address = <&ART 0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gsbi4 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
};
&gsbi4_serial {
status = "okay";
pinctrl-0 = <&uart0_pins>;
pinctrl-names = "default";
};
&gsbi5 {
status = "okay";
qcom,mode = <GSBI_PROT_SPI>;
spi@1a280000 {
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
SBL1@0 {
label = "SBL1";
reg = <0x0 0x10000>;
read-only;
};
MIBIB@10000 {
label = "MIBIB";
reg = <0x10000 0x20000>;
read-only;
};
SBL2@30000 {
label = "SBL2";
reg = <0x30000 0x30000>;
read-only;
};
SBL3@60000 {
label = "SBL3";
reg = <0x60000 0x30000>;
read-only;
};
DDRCONFIG@90000 {
label = "DDRCONFIG";
reg = <0x90000 0x10000>;
read-only;
};
SSD@a0000 {
label = "SSD";
reg = <0xa0000 0x10000>;
read-only;
};
TZ@b0000 {
label = "TZ";
reg = <0xb0000 0x30000>;
read-only;
};
RPM@e0000 {
label = "RPM";
reg = <0xe0000 0x20000>;
read-only;
};
APPSBL@100000 {
label = "APPSBL";
reg = <0x100000 0x70000>;
read-only;
};
APPSBLENV@170000 {
label = "APPSBLENV";
reg = <0x170000 0x10000>;
read-only;
};
ART: ART@180000 {
label = "ART";
reg = <0x180000 0x40000>;
read-only;
};
BOOTCONFIG@1c0000 {
label = "BOOTCONFIG";
reg = <0x1c0000 0x10000>;
read-only;
};
APPSBL_1@1d0000 {
label = "APPSBL_1";
reg = <0x1d0000 0x70000>;
read-only;
};
};
};
};
};
&hs_phy_0 { /* USB3 port 0 HS phy */
status = "okay";
};
&ss_phy_0 { /* USB3 port 0 SS phy */
status = "okay";
};
&hs_phy_1 { /* USB3 port 1 HS phy */
status = "okay";
};
&ss_phy_1 { /* USB3 port 1 SS phy */
status = "okay";
};
&usb3_0 {
status = "okay";
pinctrl-0 = <&usb_pwr_en_pins>;
pinctrl-names = "default";
};
&usb3_1 {
status = "okay";
};
&dwc3_0 {
#address-cells = <1>;
#size-cells = <0>;
hub_port0: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&dwc3_1 {
#address-cells = <1>;
#size-cells = <0>;
hub_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&pcie0 {
status = "okay";
};
&pcie1 {
status = "okay";
force_gen1 = <1>;
};
&qcom_pinmux {
button_pins: button_pins {
mux {
pins = "gpio6", "gpio54", "gpio55", "gpio56", "gpio57",
"gpio58", "gpio64", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio22",
"gpio23", "gpio24", "gpio25", "gpio26", "gpio53";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
uart0_pins: uart0_pins {
mux {
pins = "gpio10", "gpio11";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
bias-pull-down;
};
data {
pins = "gpio18", "gpio19";
drive-strength = <10>;
};
cs{
pins = "gpio20";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio21";
drive-strength = <12>;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
nand_pins: nand_pins {
mux {
pins = "gpio34", "gpio35", "gpio36",
"gpio37", "gpio38", "gpio39",
"gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
function = "nand";
drive-strength = <10>;
bias-disable;
};
pullups {
pins = "gpio39";
bias-pull-up;
};
hold {
pins = "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
bias-bus-hold;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
};
usb_pwr_en_pins: usb_pwr_en_pins {
mux{
pins = "gpio68";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
output-high;
};
};
};

1411
target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064.dtsi
View File

File diff suppressed because it is too large Load Diff

386
target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
View File

@ -1,386 +0,0 @@
#include "qcom-ipq8065.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "ZyXEL NBG6817";
compatible = "zyxel,nbg6817", "qcom,ipq8065";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
sdcc1 = &sdcc1;
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
chosen {
bootargs = "rootfstype=squashfs,ext4 rootwait noinitrd";
stdout-path = "serial0:115200n8";
append-rootblock = "root=/dev/mmcblk0p";
};
soc {
pinmux@800000 {
button_pins: button_pins {
mux {
pins = "gpio53", "gpio54", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
mux {
pins = "gpio9", "gpio26", "gpio33", "gpio64";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
clk {
pins = "gpio1";
input-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
tx {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
input-disable;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
drive-strength = <10>;
bias-none;
};
cs {
pins = "gpio20";
drive-strength = <12>;
};
};
usb0_pwr_en_pins: usb0_pwr_en_pins {
mux {
pins = "gpio16", "gpio17";
function = "gpio";
drive-strength = <12>;
};
pwr {
pins = "gpio17";
bias-pull-down;
output-high;
};
ovc {
pins = "gpio16";
bias-pull-up;
};
};
usb1_pwr_en_pins: usb1_pwr_en_pins {
mux {
pins = "gpio14", "gpio15";
function = "gpio";
drive-strength = <12>;
};
pwr {
pins = "gpio14";
bias-pull-down;
output-high;
};
ovc {
pins = "gpio15";
bias-pull-up;
};
};
};
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
serial@16340000 {
status = "ok";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "ok";
spi4: spi@1a280000 {
status = "ok";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash: m25p80@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <51200000>;
reg = <0>;
partitions {
compatible = "qcom,smem";
};
};
};
};
phy@100f8800 { /* USB3 port 1 HS phy */
status = "ok";
};
phy@100f8830 { /* USB3 port 1 SS phy */
status = "ok";
};
phy@110f8800 { /* USB3 port 0 HS phy */
status = "ok";
};
phy@110f8830 { /* USB3 port 0 SS phy */
status = "ok";
};
usb30@0 {
status = "ok";
pinctrl-0 = <&usb0_pwr_en_pins>;
pinctrl-names = "default";
};
usb30@1 {
status = "ok";
pinctrl-0 = <&usb1_pwr_en_pins>;
pinctrl-names = "default";
};
pcie0: pci@1b500000 {
status = "ok";
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie0_pins>;
pinctrl-names = "default";
};
pcie1: pci@1b700000 {
status = "ok";
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
force_gen1 = <1>;
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0xaa545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
0x00978 0x19008643 /* QM_PORT1_CTRL0 */
0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
0x00980 0x19008643 /* QM_PORT2_CTRL0 */
0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
0x00988 0x19008643 /* QM_PORT3_CTRL0 */
0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
0x00990 0x19008643 /* QM_PORT4_CTRL0 */
0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
qca,ar8327-initvals = <
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x0000c 0x80 /* PAD6_MODE */
>;
};
};
gmac1: ethernet@37200000 {
status = "ok";
phy-mode = "rgmii";
qcom,id = <1>;
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <0>;
qcom,rgmii_delay = <1>;
qcom,phy_mii_type = <0>;
qcom,emulation = <0>;
qcom,irq = <255>;
mdiobus = <&mdio0>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
fixed-link {
speed = <1000>;
full-duplex;
};
};
gmac2: ethernet@37400000 {
status = "ok";
phy-mode = "sgmii";
qcom,id = <2>;
qcom,phy_mdio_addr = <0>; /* none */
qcom,poll_required = <0>; /* no polling */
qcom,rgmii_delay = <0>;
qcom,phy_mii_type = <1>;
qcom,emulation = <0>;
qcom,irq = <258>;
mdiobus = <&mdio0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
amba {
sdcc1: sdcc@12400000 {
status = "okay";
};
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
linux,input-type = <EV_SW>;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
internet {
label = "nbg6817:white:internet";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
power: power {
label = "nbg6817:white:power";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
wifi2g {
label = "nbg6817:amber:wifi2g";
gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
};
/* wifi2g amber from the manual is missing */
wifi5g {
label = "nbg6817:amber:wifi5g";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
/* wifi5g amber from the manual is missing */
};
};
&adm_dma {
status = "ok";
};

513
target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
View File

@ -1,513 +0,0 @@
#include "qcom-ipq8065.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Netgear Nighthawk X4S R7800";
compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
rsvd@5fe00000 {
reg = <0x5fe00000 0x200000>;
reusable;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
led-boot = &power_white;
led-failsafe = &power_amber;
led-running = &power_white;
led-upgrade = &power_amber;
label-mac-device = &gmac2;
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
pinmux@800000 {
button_pins: button_pins {
mux {
pins = "gpio6", "gpio54", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
"gpio24","gpio26", "gpio53", "gpio64";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
nand_pins: nand_pins {
mux {
pins = "gpio34", "gpio35", "gpio36",
"gpio37", "gpio38", "gpio39",
"gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
function = "nand";
drive-strength = <10>;
bias-disable;
};
pullups {
pins = "gpio39";
bias-pull-up;
};
hold {
pins = "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
bias-bus-hold;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
clk {
pins = "gpio1";
input-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
tx {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
input-disable;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
bias-pull-down;
};
data {
pins = "gpio18", "gpio19";
drive-strength = <10>;
};
cs {
pins = "gpio20";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio21";
drive-strength = <12>;
};
};
spi6_pins: spi6_pins {
mux {
pins = "gpio55", "gpio56", "gpio58";
function = "gsbi6";
bias-pull-down;
};
mosi {
pins = "gpio55";
drive-strength = <12>;
};
miso {
pins = "gpio56";
drive-strength = <14>;
};
cs {
pins = "gpio57";
drive-strength = <12>;
bias-pull-up;
};
clk {
pins = "gpio58";
drive-strength = <12>;
};
reset {
pins = "gpio33";
drive-strength = <10>;
bias-pull-down;
output-high;
};
};
usb0_pwr_en_pins: usb0_pwr_en_pins {
mux {
pins = "gpio15";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
};
usb1_pwr_en_pins: usb1_pwr_en_pins {
mux {
pins = "gpio16", "gpio68";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
};
};
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
serial@16340000 {
status = "ok";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
sata-phy@1b400000 {
status = "ok";
};
sata@29000000 {
ports-implemented = <0x1>;
status = "ok";
};
phy@100f8800 { /* USB3 port 1 HS phy */
status = "ok";
};
phy@100f8830 { /* USB3 port 1 SS phy */
status = "ok";
};
phy@110f8800 { /* USB3 port 0 HS phy */
status = "ok";
};
phy@110f8830 { /* USB3 port 0 SS phy */
status = "ok";
};
usb30@0 {
status = "ok";
pinctrl-0 = <&usb0_pwr_en_pins>;
pinctrl-names = "default";
};
usb30@1 {
status = "ok";
pinctrl-0 = <&usb1_pwr_en_pins>;
pinctrl-names = "default";
};
pcie0: pci@1b500000 {
status = "ok";
};
pcie1: pci@1b700000 {
status = "ok";
force_gen1 = <1>;
};
nand@1ac00000 {
status = "ok";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
cs0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
qcadata@0 {
label = "qcadata";
reg = <0x0000000 0x0c80000>;
read-only;
};
APPSBL@c80000 {
label = "APPSBL";
reg = <0x0c80000 0x0500000>;
read-only;
};
APPSBLENV@1180000 {
label = "APPSBLENV";
reg = <0x1180000 0x0080000>;
read-only;
};
art: art@1200000 {
label = "art";
reg = <0x1200000 0x0140000>;
read-only;
};
artbak: art@1340000 {
label = "artbak";
reg = <0x1340000 0x0140000>;
read-only;
};
kernel@1480000 {
label = "kernel";
reg = <0x1480000 0x0400000>;
};
ubi@1880000 {
label = "ubi";
reg = <0x1880000 0x6080000>;
};
reserve@7900000 {
label = "reserve";
reg = <0x7900000 0x0700000>;
read-only;
};
};
};
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0xaa545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
0x00978 0x19008643 /* QM_PORT1_CTRL0 */
0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
0x00980 0x19008643 /* QM_PORT2_CTRL0 */
0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
0x00988 0x19008643 /* QM_PORT3_CTRL0 */
0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
0x00990 0x19008643 /* QM_PORT4_CTRL0 */
0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
>;
qca,ar8327-vlans = <
0x1 0x5e /* VLAN1 Ports 1/2/3/4/6 */
0x2 0x21 /* VLAN2 Ports 0/5 */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
qca,ar8327-initvals = <
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x0000c 0x80 /* PAD6_MODE */
>;
};
};
gmac1: ethernet@37200000 {
status = "ok";
phy-mode = "rgmii";
qcom,id = <1>;
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <0>;
qcom,rgmii_delay = <1>;
qcom,phy_mii_type = <0>;
qcom,emulation = <0>;
qcom,irq = <255>;
mdiobus = <&mdio0>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mtd-mac-address = <&art 6>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
gmac2: ethernet@37400000 {
status = "ok";
phy-mode = "sgmii";
qcom,id = <2>;
qcom,phy_mdio_addr = <0>; /* none */
qcom,poll_required = <0>; /* no polling */
qcom,rgmii_delay = <0>;
qcom,phy_mii_type = <1>;
qcom,emulation = <0>;
qcom,irq = <258>;
mdiobus = <&mdio0>;
mtd-mac-address = <&art 0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
debounce-interval = <60>;
wakeup-source;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
power_white: power_white {
label = "r7800:white:power";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
power_amber: power_amber {
label = "r7800:amber:power";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
wan_white {
label = "r7800:white:wan";
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
wan_amber {
label = "r7800:amber:wan";
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
usb1 {
label = "r7800:white:usb1";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb2 {
label = "r7800:white:usb2";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
esata {
label = "r7800:white:esata";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
wifi {
label = "r7800:white:wifi";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
wps {
label = "r7800:white:wps";
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
};
};
};
&adm_dma {
status = "ok";
};

78
target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065.dtsi
View File

@ -1,78 +0,0 @@
#include "qcom-ipq8064-v2.0.dtsi"
/ {
model = "Qualcomm IPQ8065";
compatible = "qcom,ipq8065", "qcom,ipq8064";
qcom,pvs {
qcom,pvs-format-a;
qcom,speed0-pvs0-bin-v0 =
< 1725000000 1262500 >,
< 1400000000 1175000 >,
< 1000000000 1100000 >,
< 800000000 1050000 >,
< 600000000 1000000 >,
< 384000000 975000 >;
qcom,speed0-pvs1-bin-v0 =
< 1725000000 1225000 >,
< 1400000000 1150000 >,
< 1000000000 1075000 >,
< 800000000 1025000 >,
< 600000000 975000 >,
< 384000000 950000 >;
qcom,speed0-pvs2-bin-v0 =
< 1725000000 1200000 >,
< 1400000000 1125000 >,
< 1000000000 1050000 >,
< 800000000 1000000 >,
< 600000000 950000 >,
< 384000000 925000 >;
qcom,speed0-pvs3-bin-v0 =
< 1725000000 1175000 >,
< 1400000000 1100000 >,
< 1000000000 1025000 >,
< 800000000 975000 >,
< 600000000 925000 >,
< 384000000 900000 >;
qcom,speed0-pvs4-bin-v0 =
< 1725000000 1150000 >,
< 1400000000 1075000 >,
< 1000000000 1000000 >,
< 800000000 950000 >,
< 600000000 900000 >,
< 384000000 875000 >;
qcom,speed0-pvs5-bin-v0 =
< 1725000000 1100000 >,
< 1400000000 1025000 >,
< 1000000000 950000 >,
< 800000000 900000 >,
< 600000000 850000 >,
< 384000000 825000 >;
qcom,speed0-pvs6-bin-v0 =
< 1725000000 1050000 >,
< 1400000000 975000 >,
< 1000000000 900000 >,
< 800000000 850000 >,
< 600000000 800000 >,
< 384000000 775000 >;
};
soc: soc {
rpm@108000 {
regulators {
smb208_s2a: s2a {
regulator-min-microvolt = <775000>;
regulator-max-microvolt = <1275000>;
};
smb208_s2b: s2b {
regulator-min-microvolt = <775000>;
regulator-max-microvolt = <1275000>;
};
};
};
};
};

229
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
View File

@ -1,229 +0,0 @@
#include "qcom-ipq8064-v1.0.dtsi"
/ {
model = "Qualcomm Technologies, Inc. IPQ8064/AP-148";
compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
};
};
};
&qcom_pinmux {
i2c4_pins: i2c4_pinmux {
pins = "gpio12", "gpio13";
function = "gsbi4";
bias-disable;
};
nand_pins: nand_pins {
disable {
pins = "gpio34", "gpio35", "gpio36",
"gpio37", "gpio38";
function = "nand";
drive-strength = <10>;
bias-disable;
};
pullups {
pins = "gpio39";
function = "nand";
drive-strength = <10>;
bias-pull-up;
};
hold {
pins = "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
function = "nand";
drive-strength = <10>;
bias-bus-hold;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
};
};
&adm_dma {
status = "okay";
};
&gsbi4 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
serial@16340000 {
status = "okay";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
&gsbi5 {
qcom,mode = <GSBI_PROT_SPI>;
status = "okay";
spi4: spi@1a280000 {
status = "okay";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 0>;
flash: m25p80@0 {
compatible = "s25fl256s1";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
partitions {
compatible = "qcom,smem";
};
};
};
};
&usb3_0 {
status = "okay";
};
&usb3_1 {
status = "okay";
};
&pcie0 {
status = "okay";
};
&pcie1 {
status = "okay";
force_gen1 = <1>;
};
&nand {
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
cs0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
partitions {
compatible = "qcom,smem";
};
};
};
&gmac1 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&sata_phy {
status = "okay";
};
&sata {
status = "okay";
};

264
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
View File

@ -1,264 +0,0 @@
#include "qcom-ipq8064-v1.0.dtsi"
/ {
model = "Qualcomm IPQ8064/AP161";
compatible = "qcom,ipq8064-ap161", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
pinmux@800000 {
i2c4_pins: i2c4_pinmux {
pins = "gpio12", "gpio13";
function = "gsbi4";
bias-disable;
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
drive-strength = <10>;
bias-none;
};
};
nand_pins: nand_pins {
disable {
pins = "gpio34", "gpio35", "gpio36",
"gpio37", "gpio38";
function = "nand";
drive-strength = <10>;
bias-disable;
};
pullups {
pins = "gpio39";
function = "nand";
drive-strength = <10>;
bias-pull-up;
};
hold {
pins = "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
function = "nand";
drive-strength = <10>;
bias-bus-hold;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio2", "gpio27", "gpio28",
"gpio29", "gpio30", "gpio31",
"gpio32", "gpio51", "gpio52",
"gpio59", "gpio60", "gpio61",
"gpio62" , "gpio66";
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
};
};
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
serial@16340000 {
status = "okay";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "okay";
spi4: spi@1a280000 {
status = "okay";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 0>;
flash: m25p80@0 {
compatible = "s25fl256s1";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
partitions {
compatible = "qcom,smem";
};
};
};
};
sata-phy@1b400000 {
status = "okay";
};
sata@29000000 {
status = "okay";
};
usb3_0: usb3@110f8800 {
status = "okay";
};
usb3_1: usb3@100f8800 {
status = "okay";
};
pcie0: pci@1b500000 {
status = "okay";
};
pcie1: pci@1b700000 {
status = "okay";
force_gen1 = <1>;
};
pcie2: pci@1b900000 {
status = "okay";
};
nand@1ac00000 {
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
cs0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
partitions {
compatible = "qcom,smem";
};
};
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x20080 /* PAD6_MODE */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
qca,phy-rgmii-en;
qca,txclk-delay-en;
qca,rxclk-delay-en;
};
phy3: ethernet-phy@3 {
device_type = "ethernet-phy";
reg = <3>;
};
};
gmac0: ethernet@37000000 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <0>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mdiobus = <&mdio0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
gmac1: ethernet@37200000 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
mdiobus = <&mdio0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
gmac2: ethernet@37400000 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
mdiobus = <&mdio0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
&adm_dma {
status = "okay";
};

479
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
View File

@ -1,479 +0,0 @@
#include "qcom-ipq8064-v2.0.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "TP-Link Archer C2600";
compatible = "tplink,c2600", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
led-boot = &power;
led-failsafe = &general;
led-running = &power;
led-upgrade = &general;
label-mac-device = &gmac2;
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
pinmux@800000 {
button_pins: button_pins {
mux {
pins = "gpio16", "gpio54", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
mux {
pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33",
"gpio53", "gpio66";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
bias-pull-down;
};
data {
pins = "gpio18", "gpio19";
drive-strength = <10>;
};
cs {
pins = "gpio20";
function = "gpio";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio21";
drive-strength = <12>;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
};
usb0_pwr_en_pin: usb0_pwr_en_pin {
mux {
pins = "gpio25";
function = "gpio";
drive-strength = <10>;
bias-pull-up;
output-high;
};
};
usb1_pwr_en_pin: usb1_pwr_en_pin {
mux {
pins = "gpio23";
function = "gpio";
drive-strength = <10>;
bias-pull-up;
output-high;
};
};
};
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
serial@16340000 {
status = "okay";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "okay";
spi5: spi@1a280000 {
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash: m25p80@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
SBL1@0 {
label = "SBL1";
reg = <0x0 0x20000>;
read-only;
};
MIBIB@20000 {
label = "MIBIB";
reg = <0x20000 0x20000>;
read-only;
};
SBL2@40000 {
label = "SBL2";
reg = <0x40000 0x20000>;
read-only;
};
SBL3@60000 {
label = "SBL3";
reg = <0x60000 0x30000>;
read-only;
};
DDRCONFIG@90000 {
label = "DDRCONFIG";
reg = <0x90000 0x10000>;
read-only;
};
SSD@a0000 {
label = "SSD";
reg = <0xa0000 0x10000>;
read-only;
};
TZ@b0000 {
label = "TZ";
reg = <0xb0000 0x30000>;
read-only;
};
RPM@e0000 {
label = "RPM";
reg = <0xe0000 0x20000>;
read-only;
};
fs-uboot@100000 {
label = "fs-uboot";
reg = <0x100000 0x70000>;
read-only;
};
uboot-env@170000 {
label = "uboot-env";
reg = <0x170000 0x40000>;
read-only;
};
radio@1b0000 {
label = "radio";
reg = <0x1b0000 0x40000>;
read-only;
};
os-image@1f0000 {
label = "os-image";
reg = <0x1f0000 0x400000>;
};
rootfs@5f0000 {
label = "rootfs";
reg = <0x5f0000 0x1900000>;
};
defaultmac: default-mac@1ef0000 {
label = "default-mac";
reg = <0x1ef0000 0x00200>;
read-only;
};
pin@1ef0200 {
label = "pin";
reg = <0x1ef0200 0x00200>;
read-only;
};
product-info@1ef0400 {
label = "product-info";
reg = <0x1ef0400 0x0fc00>;
read-only;
};
partition-table@1f00000 {
label = "partition-table";
reg = <0x1f00000 0x10000>;
read-only;
};
soft-version@1f10000 {
label = "soft-version";
reg = <0x1f10000 0x10000>;
read-only;
};
support-list@1f20000 {
label = "support-list";
reg = <0x1f20000 0x10000>;
read-only;
};
profile@1f30000 {
label = "profile";
reg = <0x1f30000 0x10000>;
read-only;
};
default-config@1f40000 {
label = "default-config";
reg = <0x1f40000 0x10000>;
read-only;
};
user-config@1f50000 {
label = "user-config";
reg = <0x1f50000 0x40000>;
read-only;
};
qos-db@1f90000 {
label = "qos-db";
reg = <0x1f90000 0x40000>;
read-only;
};
usb-config@1fd0000 {
label = "usb-config";
reg = <0x1fd0000 0x10000>;
read-only;
};
log@1fe0000 {
label = "log";
reg = <0x1fe0000 0x20000>;
read-only;
};
};
};
};
usb3_0: usb3@110f8800 {
status = "okay";
pinctrl-0 = <&usb0_pwr_en_pin>;
pinctrl-names = "default";
};
usb3_1: usb3@100f8800 {
status = "okay";
pinctrl-0 = <&usb1_pwr_en_pin>;
pinctrl-names = "default";
};
pcie0: pci@1b500000 {
status = "okay";
};
pcie1: pci@1b700000 {
status = "okay";
force_gen1 = <1>;
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
};
gmac1: ethernet@37200000 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mtd-mac-address = <&defaultmac 0x8>;
mtd-mac-address-increment = <1>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
gmac2: ethernet@37400000 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
mtd-mac-address = <&defaultmac 0x8>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
ledswitch {
label = "ledswitch";
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_LIGHTS_TOGGLE>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
lan {
label = "c2600:white:lan";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
};
usb4 {
label = "c2600:white:usb_4";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb2 {
label = "c2600:white:usb_2";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
wps {
label = "c2600:white:wps";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
wan_amber {
label = "c2600:amber:wan";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
};
wan_white {
label = "c2600:white:wan";
gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
};
power: power {
label = "c2600:white:power";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
general: general {
label = "c2600:white:general";
gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
};
};
};
&adm_dma {
status = "okay";
};

396
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
View File

@ -1,396 +0,0 @@
#include "qcom-ipq8064-v2.0.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Netgear Nighthawk X4 D7800";
compatible = "netgear,d7800", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0xe000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
led-boot = &power_white;
led-failsafe = &power_amber;
led-running = &power_white;
led-upgrade = &power_amber;
};
chosen {
bootargs = "rootfstype=squashfs noinitrd";
stdout-path = "serial0:115200n8";
};
soc {
pinmux@800000 {
button_pins: button_pins {
mux {
pins = "gpio6", "gpio54", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
"gpio24","gpio26", "gpio53", "gpio64";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
nand_pins: nand_pins {
disable {
pins = "gpio34", "gpio35", "gpio36",
"gpio37", "gpio38";
function = "nand";
drive-strength = <10>;
bias-disable;
};
pullups {
pins = "gpio39";
function = "nand";
drive-strength = <10>;
bias-pull-up;
};
hold {
pins = "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
function = "nand";
drive-strength = <10>;
bias-bus-hold;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
};
usb0_pwr_en_pins: usb0_pwr_en_pins {
mux {
pins = "gpio15";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
};
usb1_pwr_en_pins: usb1_pwr_en_pins {
mux {
pins = "gpio16", "gpio68";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
};
};
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
serial@16340000 {
status = "okay";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
sata-phy@1b400000 {
status = "okay";
};
sata@29000000 {
ports-implemented = <0x1>;
status = "okay";
};
usb3_0: usb3@110f8800 {
status = "okay";
pinctrl-0 = <&usb0_pwr_en_pins>;
pinctrl-names = "default";
};
usb3_1: usb3@100f8800 {
status = "okay";
pinctrl-0 = <&usb1_pwr_en_pins>;
pinctrl-names = "default";
};
pcie0: pci@1b500000 {
status = "okay";
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&pcie0_pins>;
pinctrl-names = "default";
};
pcie1: pci@1b700000 {
status = "okay";
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
force_gen1 = <1>;
};
nand@1ac00000 {
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
cs0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
qcadata@0 {
label = "qcadata";
reg = <0x0000000 0x0c80000>;
read-only;
};
APPSBL@c80000 {
label = "APPSBL";
reg = <0x0c80000 0x0500000>;
read-only;
};
APPSBLENV@1180000 {
label = "APPSBLENV";
reg = <0x1180000 0x0080000>;
read-only;
};
art: art@1200000 {
label = "art";
reg = <0x1200000 0x0140000>;
read-only;
};
artbak: art@1340000 {
label = "artbak";
reg = <0x1340000 0x0140000>;
read-only;
};
kernel@1480000 {
label = "kernel";
reg = <0x1480000 0x0400000>;
};
ubi@1880000 {
label = "ubi";
reg = <0x1880000 0x1C00000>;
};
netgear@3480000 {
label = "netgear";
reg = <0x3480000 0x4480000>;
read-only;
};
reserve@7900000 {
label = "reserve";
reg = <0x7900000 0x0700000>;
read-only;
};
};
};
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
};
gmac1: ethernet@37200000 {
status = "okay";
phy-mode = "rgmii";
phy-handle = <&phy4>;
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mtd-mac-address = <&art 6>;
};
gmac2: ethernet@37400000 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
mtd-mac-address = <&art 0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
usb1 {
label = "d7800:white:usb1";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb2 {
label = "d7800:white:usb2";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
power_amber: power_amber {
label = "d7800:amber:power";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
wan_white {
label = "d7800:white:wan";
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
wan_amber {
label = "d7800:amber:wan";
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
wps {
label = "d7800:white:wps";
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
};
esata {
label = "d7800:white:esata";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
power_white: power_white {
label = "d7800:white:power";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
wifi {
label = "d7800:white:wifi";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
};
};
&adm_dma {
status = "okay";
};

216
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-db149.dts
View File

@ -1,216 +0,0 @@
#include "qcom-ipq8064-v1.0.dtsi"
/ {
model = "Qualcomm IPQ8064/DB149";
compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
aliases {
serial0 = &gsbi2_serial;
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
pinmux@800000 {
i2c4_pins: i2c4_pinmux {
pins = "gpio12", "gpio13";
function = "gsbi4";
bias-disable;
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
drive-strength = <10>;
bias-none;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
rgmii0_pins: rgmii0_pins {
mux {
pins = "gpio2", "gpio66";
drive-strength = <8>;
bias-disable;
};
};
};
gsbi2: gsbi@12480000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
gsbi2_serial: serial@12490000 {
status = "okay";
};
};
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "okay";
spi4: spi@1a280000 {
status = "okay";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 0>;
flash: m25p80@0 {
compatible = "s25fl256s1";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
m25p,fast-read;
partition@0 {
label = "lowlevel_init";
reg = <0x0 0x1b0000>;
};
partition@1 {
label = "u-boot";
reg = <0x1b0000 0x80000>;
};
partition@2 {
label = "u-boot-env";
reg = <0x230000 0x40000>;
};
partition@3 {
label = "caldata";
reg = <0x270000 0x40000>;
};
partition@4 {
label = "firmware";
reg = <0x2b0000 0x1d50000>;
};
};
};
};
sata-phy@1b400000 {
status = "okay";
};
sata@29000000 {
status = "okay";
};
usb3_0: usb3@110f8800 {
status = "okay";
};
usb3_1: usb3@100f8800 {
status = "okay";
};
pcie0: pci@1b500000 {
status = "okay";
};
pcie1: pci@1b700000 {
status = "okay";
};
pcie2: pci@1b900000 {
status = "okay";
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
phy6: ethernet-phy@6 {
reg = <6>;
};
phy7: ethernet-phy@7 {
reg = <7>;
};
};
gmac0: ethernet@37000000 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <0>;
phy-handle = <&phy4>;
pinctrl-0 = <&rgmii0_pins>;
pinctrl-names = "default";
};
gmac1: ethernet@37200000 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <1>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
gmac2: ethernet@37400000 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
phy-handle = <&phy6>;
};
gmac3: ethernet@37600000 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <3>;
phy-handle = <&phy7>;
};
};
};

388
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
View File

@ -1,388 +0,0 @@
#include "qcom-ipq8064-v2.0.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Linksys EA8500 WiFi Router";
compatible = "linksys,ea8500", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
chosen {
bootargs = "console=ttyMSM0,115200n8";
stdout-path = "serial0:115200n8";
append-rootblock = "ubi.mtd="; /* append to bootargs adding the root deviceblock nbr from bootloader */
};
soc {
pinmux@800000 {
button_pins: button_pins {
mux {
pins = "gpio65", "gpio67", "gpio68";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
mux {
pins = "gpio6", "gpio53", "gpio54";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
nand_pins: nand_pins {
disable {
pins = "gpio34", "gpio35", "gpio36",
"gpio37", "gpio38";
function = "nand";
drive-strength = <10>;
bias-disable;
};
pullups {
pins = "gpio39";
function = "nand";
drive-strength = <10>;
bias-pull-up;
};
hold {
pins = "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
function = "nand";
drive-strength = <10>;
bias-bus-hold;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
};
};
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
serial@16340000 {
status = "okay";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
sata-phy@1b400000 {
status = "okay";
};
sata@29000000 {
status = "okay";
};
usb3_0: usb3@110f8800 {
status = "okay";
};
usb3_1: usb3@100f8800 {
status = "okay";
};
pcie0: pci@1b500000 {
status = "okay";
force_gen1 = <1>;
};
pcie1: pci@1b700000 {
status = "okay";
};
pcie2: pci@1b900000 {
status = "okay";
};
nand@1ac00000 {
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
cs0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
SBL1@0 {
label = "SBL1";
reg = <0x0000000 0x0040000>;
read-only;
};
MIBIB@40000 {
label = "MIBIB";
reg = <0x0040000 0x0140000>;
read-only;
};
SBL2@180000 {
label = "SBL2";
reg = <0x0180000 0x0140000>;
read-only;
};
SBL3@2c0000 {
label = "SBL3";
reg = <0x02c0000 0x0280000>;
read-only;
};
DDRCONFIG@540000 {
label = "DDRCONFIG";
reg = <0x0540000 0x0120000>;
read-only;
};
SSD@660000 {
label = "SSD";
reg = <0x0660000 0x0120000>;
read-only;
};
TZ@780000 {
label = "TZ";
reg = <0x0780000 0x0280000>;
read-only;
};
RPM@a00000 {
label = "RPM";
reg = <0x0a00000 0x0280000>;
read-only;
};
art: art@c80000 {
label = "art";
reg = <0x0c80000 0x0140000>;
read-only;
};
APPSBL@dc0000 {
label = "APPSBL";
reg = <0x0dc0000 0x0100000>;
read-only;
};
u_env@ec0000 {
label = "u_env";
reg = <0x0ec0000 0x0040000>;
};
s_env@f00000 {
label = "s_env";
reg = <0x0f00000 0x0040000>;
};
devinfo@f40000 {
label = "devinfo";
reg = <0x0f40000 0x0040000>;
};
linux@f80000 {
label = "kernel1";
reg = <0x0f80000 0x2800000>; /* 3 MB spill to rootfs*/
};
rootfs@1280000 {
label = "rootfs1";
reg = <0x1280000 0x2500000>;
};
linux2@3780000 {
label = "kernel2";
reg = <0x3780000 0x2800000>;
};
rootfs2@3a80000 {
label = "rootfs2";
reg = <0x3a80000 0x2500000>;
};
syscfg@5f80000 {
label = "syscfg";
reg = <0x5f80000 0x2080000>;
};
};
};
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x00010 0x2613a0 /* PWS_REG */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
};
gmac1: ethernet@37200000 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <1>;
qcom,rgmii_delay = <0>;
qcom,emulation = <0>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
fixed-link {
speed = <1000>;
full-duplex;
};
};
//lan
gmac2: ethernet@37400000 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
qcom,phy_mdio_addr = <0>; /* none */
qcom,poll_required = <0>; /* no polling */
qcom,rgmii_delay = <0>;
qcom,emulation = <0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
adm_dma: dma@18300000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART >;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
wps {
label = "ea8500:green:wps";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
};
power: power {
label = "ea8500:white:power";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
wifi {
label = "ea8500:green:wifi";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
};
};
};

394
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-mtfi-m520.dts
View File

@ -1,394 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq8064-v2.0.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Ruijie RG-MTFi-M520";
compatible = "ruijie,rg-mtfi-m520", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x7e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
sdcc1 = &sdcc1;
};
chosen {
bootargs = "root=/dev/mmcblk0p3 rootfstype=squashfs,ext4 rootwait noinitrd";
stdout-path = "serial0:115200n8";
};
cpus {
idle-states {
CPU_SPC: spc {
status = "disabled";
};
};
};
soc {
pinmux@800000 {
button_pins: button_pins {
mux {
pins = "gpio54";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio53";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
clk {
pins = "gpio1";
input-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62";
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
tx {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32";
input-disable;
};
};
sdcc1_pins: sdcc1_pinmux {
mux {
pins = "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45", "gpio46", "gpio47";
function = "sdc1";
};
cmd {
pins = "gpio45";
drive-strength = <10>;
bias-pull-up;
};
data {
pins = "gpio38", "gpio39", "gpio40", "gpio41",
"gpio43", "gpio44", "gpio46", "gpio47";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio42";
drive-strength = <16>;
bias-disable;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
drive-strength = <10>;
bias-none;
};
cs {
pins = "gpio20";
drive-strength = <12>;
};
};
};
gsbi2: gsbi@12480000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
i2c@124a0000 {
status = "okay";
lm75@48 {
status = "okay";
compatible = "lm75";
reg = <0x48>;
};
pcf8563: rtc@51 {
status = "okay";
compatible = "nxp,pcf8563";
reg = <0x51>;
};
tca9539@74 {
status = "okay";
compatible = "ti,tca9539";
reg = <0x74>;
};
};
};
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
serial@16340000 {
status = "okay";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "okay";
spi4: spi@1a280000 {
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash: m25p80@0 {
compatible = "s25fl256s1";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
SBL1@0 {
label = "SBL1";
reg = <0x0 0x10000>;
read-only;
};
MIBIB@10000 {
label = "MIBIB";
reg = <0x10000 0x10000>;
read-only;
};
SBL2@20000 {
label = "SBL2";
reg = <0x20000 0x20000>;
read-only;
};
SBL3@40000 {
label = "SBL3";
reg = <0x40000 0x30000>;
read-only;
};
DDRCONFIG@70000 {
label = "DDRCONFIG";
reg = <0x70000 0x10000>;
read-only;
};
PRODUCTINFO: PRODUCTINFO@80000 {
label = "PRODUCTINFO";
reg = <0x80000 0x10000>;
read-only;
};
TZ@90000 {
label = "TZ";
reg = <0x90000 0x30000>;
read-only;
};
RPM@c0000 {
label = "RPM";
reg = <0xc0000 0x20000>;
read-only;
};
APPSBL@e0000 {
label = "APPSBL";
reg = <0xe0000 0x80000>;
read-only;
};
APPSBLENV@160000 {
label = "APPSBLENV";
reg = <0x160000 0x10000>;
read-only;
};
BOOTCONFIG@170000 {
label = "BOOTCONFIG";
reg = <0x170000 0x10000>;
read-only;
};
ART@180000 {
label = "ART";
reg = <0x180000 0x40000>;
read-only;
};
};
};
};
sata-phy@1b400000 {
status = "okay";
};
sata@29000000 {
ports-implemented = <0x1>;
status = "okay";
};
usb3_0: usb3@110f8800 {
status = "okay";
};
usb3_1: usb3@100f8800 {
status = "okay";
};
pcie0: pci@1b500000 {
status = "okay";
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie0_pins>;
pinctrl-names = "default";
};
pcie1: pci@1b700000 {
status = "okay";
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
force_gen1 = <1>;
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
};
gmac1: ethernet@37200000 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mtd-mac-address-ascii = <&PRODUCTINFO 0x86a>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
gmac2: ethernet@37400000 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
mtd-mac-address-ascii = <&PRODUCTINFO 0x86a>;
mtd-mac-address-increment = <1>;
mtd-mac-address-increment-byte = <0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
amba {
sdcc1: sdcc@12400000 {
status = "okay";
pinctrl-0 = <&sdcc1_pins>;
pinctrl-names = "default";
};
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&adm_dma {
status = "okay";
};

366
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
View File

@ -1,366 +0,0 @@
#include "qcom-ipq8064-v1.0.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "Netgear Nighthawk X4 R7500";
compatible = "netgear,r7500", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0xe000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
led-boot = &power_white;
led-failsafe = &power_amber;
led-running = &power_white;
led-upgrade = &power_amber;
};
chosen {
bootargs = "rootfstype=squashfs noinitrd";
stdout-path = "serial0:115200n8";
};
soc {
pinmux@800000 {
button_pins: button_pins {
mux {
pins = "gpio6", "gpio54", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
"gpio24","gpio26", "gpio53", "gpio64";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
nand_pins: nand_pins {
disable {
pins = "gpio34", "gpio35", "gpio36",
"gpio37", "gpio38";
function = "nand";
drive-strength = <10>;
bias-disable;
};
pullups {
pins = "gpio39";
function = "nand";
drive-strength = <10>;
bias-pull-up;
};
hold {
pins = "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
function = "nand";
drive-strength = <10>;
bias-bus-hold;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
};
};
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
serial@16340000 {
status = "okay";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
sata-phy@1b400000 {
status = "okay";
};
sata@29000000 {
status = "okay";
};
usb3_0: usb3@110f8800 {
clocks = <&gcc USB30_1_MASTER_CLK>;
status = "okay";
};
usb3_1: usb3@100f8800 {
clocks = <&gcc USB30_0_MASTER_CLK>;
status = "okay";
};
pcie0: pci@1b500000 {
status = "okay";
};
pcie1: pci@1b700000 {
status = "okay";
force_gen1 = <1>;
};
nand@1ac00000 {
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
cs0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
qcadata@0 {
label = "qcadata";
reg = <0x0000000 0x0c80000>;
read-only;
};
APPSBL@c80000 {
label = "APPSBL";
reg = <0x0c80000 0x0500000>;
read-only;
};
APPSBLENV@1180000 {
label = "APPSBLENV";
reg = <0x1180000 0x0080000>;
read-only;
};
art: art@1200000 {
label = "art";
reg = <0x1200000 0x0140000>;
read-only;
};
kernel@1340000 {
label = "kernel";
reg = <0x1340000 0x0400000>;
};
ubi@1740000 {
label = "ubi";
reg = <0x1740000 0x1600000>;
};
netgear@2d40000 {
label = "netgear";
reg = <0x2d40000 0x0c00000>;
read-only;
};
reserve@3940000 {
label = "reserve";
reg = <0x3940000 0x46c0000>;
read-only;
};
};
};
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
};
gmac1: ethernet@37200000 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mtd-mac-address = <&art 6>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
gmac2: ethernet@37400000 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
mtd-mac-address = <&art 0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
usb1 {
label = "r7500:white:usb1";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb2 {
label = "r7500:white:usb2";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
power_amber: power_amber {
label = "r7500:amber:power";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
wan_white {
label = "r7500:white:wan";
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
wan_amber {
label = "r7500:amber:wan";
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
wps {
label = "r7500:white:wps";
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
};
esata {
label = "r7500:white:esata";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
power_white: power_white {
label = "r7500:white:power";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
wifi {
label = "r7500:white:wifi";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
};
};
&tcsr {
qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
compatible = "qcom,tcsr";
};
&adm_dma {
status = "okay";
};

395
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
View File

@ -1,395 +0,0 @@
#include "qcom-ipq8064-v2.0.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Netgear Nighthawk X4 R7500v2";
compatible = "netgear,r7500v2", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
rsvd@5fe00000 {
reg = <0x5fe00000 0x200000>;
reusable;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
chosen {
bootargs = "rootfstype=squashfs noinitrd";
stdout-path = "serial0:115200n8";
};
soc {
pinmux@800000 {
button_pins: button_pins {
mux {
pins = "gpio6", "gpio54", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
"gpio24","gpio26", "gpio53", "gpio64";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
nand_pins: nand_pins {
disable {
pins = "gpio34", "gpio35", "gpio36",
"gpio37", "gpio38";
function = "nand";
drive-strength = <10>;
bias-disable;
};
pullups {
pins = "gpio39";
function = "nand";
drive-strength = <10>;
bias-pull-up;
};
hold {
pins = "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
function = "nand";
drive-strength = <10>;
bias-bus-hold;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
};
usb0_pwr_en_pins: usb0_pwr_en_pins {
mux {
pins = "gpio15";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
};
usb1_pwr_en_pins: usb1_pwr_en_pins {
mux {
pins = "gpio16", "gpio68";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
};
};
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
serial@16340000 {
status = "okay";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
sata-phy@1b400000 {
status = "okay";
};
sata@29000000 {
status = "okay";
};
usb3_0: usb3@110f8800 {
status = "okay";
pinctrl-0 = <&usb0_pwr_en_pins>;
pinctrl-names = "default";
};
usb3_1: usb3@100f8800 {
status = "okay";
pinctrl-0 = <&usb1_pwr_en_pins>;
pinctrl-names = "default";
};
pcie0: pci@1b500000 {
status = "okay";
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie0_pins>;
pinctrl-names = "default";
};
pcie1: pci@1b700000 {
status = "okay";
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
force_gen1 = <1>;
};
nand@1ac00000 {
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
cs0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
qcadata@0 {
label = "qcadata";
reg = <0x0000000 0x0c80000>;
read-only;
};
APPSBL@c80000 {
label = "APPSBL";
reg = <0x0c80000 0x0500000>;
read-only;
};
APPSBLENV@1180000 {
label = "APPSBLENV";
reg = <0x1180000 0x0080000>;
read-only;
};
art: art@1200000 {
label = "art";
reg = <0x1200000 0x0140000>;
read-only;
};
artbak: art@1340000 {
label = "artbak";
reg = <0x1340000 0x0140000>;
read-only;
};
kernel@1480000 {
label = "kernel";
reg = <0x1480000 0x0400000>;
};
ubi@1880000 {
label = "ubi";
reg = <0x1880000 0x6080000>;
};
reserve@7900000 {
label = "reserve";
reg = <0x7900000 0x0700000>;
read-only;
};
};
};
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0xaa545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
};
gmac1: ethernet@37200000 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mtd-mac-address = <&art 6>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
gmac2: ethernet@37400000 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
mtd-mac-address = <&art 0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
usb1 {
label = "r7500v2:amber:usb1";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb3 {
label = "r7500v2:amber:usb3";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
status {
label = "r7500v2:amber:status";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
internet {
label = "r7500v2:white:internet";
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
wan {
label = "r7500v2:white:wan";
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
wps {
label = "r7500v2:white:wps";
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
};
esata {
label = "r7500v2:white:esata";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
power: power {
label = "r7500v2:white:power";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
wifi {
label = "r7500v2:white:wifi";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
};
};
&adm_dma {
status = "okay";
};

30
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
View File

@ -1,30 +0,0 @@
#include "qcom-ipq8064-v1.0.dtsi"
/ {
soc: soc {
pcie0: pci@1b500000 {
phy-tx0-term-offset = <0>;
};
pcie1: pci@1b700000 {
phy-tx0-term-offset = <0>;
};
pcie2: pci@1b900000 {
phy-tx0-term-offset = <0>;
};
};
};
&ss_phy_0 {
rx_eq = <2>;
tx_deamp_3_5db = <32>;
mpll = <0xa0>;
};
&ss_phy_1 {
rx_eq = <2>;
tx_deamp_3_5db = <32>;
mpll = <0xa0>;
};

402
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
View File

@ -1,402 +0,0 @@
#include "qcom-ipq8064-v2.0.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "TP-Link Archer VR2600v";
compatible = "tplink,vr2600v", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
led-boot = &power;
led-failsafe = &general;
led-running = &power;
led-upgrade = &general;
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
pinmux@800000 {
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17",
"gpio26", "gpio53", "gpio56", "gpio66";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
button_pins: button_pins {
mux {
pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
bias-pull-down;
};
data {
pins = "gpio18", "gpio19";
drive-strength = <10>;
};
cs {
pins = "gpio20";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio21";
drive-strength = <12>;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
};
};
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
serial@16340000 {
status = "okay";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "okay";
spi4: spi@1a280000 {
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash: W25Q128@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
SBL1@0 {
label = "SBL1";
reg = <0x0 0x20000>;
read-only;
};
MIBIB@20000 {
label = "MIBIB";
reg = <0x20000 0x20000>;
read-only;
};
SBL2@40000 {
label = "SBL2";
reg = <0x40000 0x40000>;
read-only;
};
SBL3@80000 {
label = "SBL3";
reg = <0x80000 0x80000>;
read-only;
};
DDRCONFIG@100000 {
label = "DDRCONFIG";
reg = <0x100000 0x10000>;
read-only;
};
SSD@110000 {
label = "SSD";
reg = <0x110000 0x10000>;
read-only;
};
TZ@120000 {
label = "TZ";
reg = <0x120000 0x80000>;
read-only;
};
RPM@1a0000 {
label = "RPM";
reg = <0x1a0000 0x80000>;
read-only;
};
APPSBL@220000 {
label = "APPSBL";
reg = <0x220000 0x80000>;
read-only;
};
APPSBLENV@2a0000 {
label = "APPSBLENV";
reg = <0x2a0000 0x40000>;
read-only;
};
OLDART@2e0000 {
label = "OLDART";
reg = <0x2e0000 0x40000>;
read-only;
};
kernel@320000 {
label = "kernel";
reg = <0x320000 0x300000>;
};
rootfs@620000 {
label = "rootfs";
reg = <0x620000 0x960000>;
};
defaultmac: default-mac@0xfaf100 {
label = "default-mac";
reg = <0xfaf100 0x00200>;
read-only;
};
ART@fc0000 {
label = "ART";
reg = <0xfc0000 0x40000>;
read-only;
};
};
};
};
usb3_0: usb3@110f8800 {
status = "okay";
};
usb3_1: usb3@100f8800 {
status = "okay";
};
pcie0: pci@1b500000 {
status = "okay";
};
pcie1: pci@1b700000 {
status = "okay";
force_gen1 = <1>;
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
};
gmac1: ethernet@37200000 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mtd-mac-address = <&defaultmac 0>;
mtd-mac-address-increment = <1>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
gmac2: ethernet@37400000 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
mtd-mac-address = <&defaultmac 0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
dect {
label = "dect";
gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PHONE>;
};
ledswitch {
label = "ledswitch";
gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
linux,code = <KEY_LIGHTS_TOGGLE>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
dsl {
label = "vr2600v:white:dsl";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb {
label = "vr2600v:white:usb";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
lan {
label = "vr2600v:white:lan";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
wlan2g {
label = "vr2600v:white:wlan2g";
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
};
wlan5g {
label = "vr2600v:white:wlan5g";
gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
};
power: power {
label = "vr2600v:white:power";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
phone {
label = "vr2600v:white:phone";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
};
wan {
label = "vr2600v:white:wan";
gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
};
general: general {
label = "vr2600v:white:general";
gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
};
};
};
&adm_dma {
status = "okay";
};

427
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts
View File

@ -1,427 +0,0 @@
#include "qcom-ipq8064-v2.0.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "NEC Aterm WG2600HP";
compatible = "nec,wg2600hp", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-upgrade = &power_green;
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x06000000 /* PAD0_MODE */
0x0000c 0x00080080 /* PAD6_MODE */
0x000e4 0x0006a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x0000004e /* PORT0_STATUS */
0x00094 0x0000004e /* PORT6_STATUS */
>;
};
ethernet-phy@4 {
reg = <4>;
};
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wps {
label = "wps";
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
bridge {
label = "bridge";
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
converter {
label = "converter";
gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
converter_green {
label = "wg2600hp:green:converter";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
};
power_red: power_red {
label = "wg2600hp:red:power";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
active_green {
label = "wg2600hp:green:active";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
active_red {
label = "wg2600hp:red:active";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
power_green: power_green {
label = "wg2600hp:green:power";
gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
};
converter_red {
label = "wg2600hp:red:converter";
gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
};
wlan2g_green {
label = "wg2600hp:green:wlan2g";
gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
};
wlan2g_red {
label = "wg2600hp:red:wlan2g";
gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
};
wlan5g_green {
label = "wg2600hp:green:wlan5g";
gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
};
wlan5g_red {
label = "wg2600hp:red:wlan5g";
gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>;
};
tv_green {
label = "wg2600hp:green:tv";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
tv_red {
label = "wg2600hp:red:tv";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_HIGH>;
};
};
};
&adm_dma {
status = "okay";
};
&gmac1 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mtd-mac-address = <&PRODUCTDATA 6>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
mtd-mac-address = <&PRODUCTDATA 0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gsbi4 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
};
&gsbi4_serial {
status = "okay";
};
&gsbi5 {
status = "okay";
qcom,mode = <GSBI_PROT_SPI>;
spi@1a280000 {
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
SBL1@0 {
label = "SBL1";
reg = <0x0 0x20000>;
read-only;
};
MIBIB@20000 {
label = "MIBIB";
reg = <0x20000 0x20000>;
read-only;
};
SBL2@40000 {
label = "SBL2";
reg = <0x40000 0x40000>;
read-only;
};
SBL3@80000 {
label = "SBL3";
reg = <0x80000 0x80000>;
read-only;
};
DDRCONFIG@100000 {
label = "DDRCONFIG";
reg = <0x100000 0x10000>;
read-only;
};
SSD@110000 {
label = "SSD";
reg = <0x110000 0x10000>;
read-only;
};
TZ@120000 {
label = "TZ";
reg = <0x120000 0x80000>;
read-only;
};
RPM@1a0000 {
label = "RPM";
reg = <0x1a0000 0x80000>;
read-only;
};
APPSBL@220000 {
label = "APPSBL";
reg = <0x220000 0x80000>;
read-only;
};
APPSBLENV@2a0000 {
label = "APPSBLENV";
reg = <0x2a0000 0x10000>;
};
PRODUCTDATA: PRODUCTDATA@2b0000 {
label = "PRODUCTDATA";
reg = <0x2b0000 0x30000>;
read-only;
};
ART@2e0000 {
label = "ART";
reg = <0x2e0000 0x40000>;
read-only;
};
TP@320000 {
label = "TP";
reg = <0x320000 0x40000>;
read-only;
};
TINY@360000 {
label = "TINY";
reg = <0x360000 0x500000>;
read-only;
};
firmware@860000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x860000 0x17a0000>;
};
};
};
};
};
&usb3_0 {
status = "okay";
pinctrl-0 = <&usb_pwr_en_pins>;
pinctrl-names = "default";
};
&usb3_1 {
status = "okay";
};
&pcie0 {
status = "okay";
};
&pcie1 {
status = "okay";
force_gen1 = <1>;
};
&qcom_pinmux {
button_pins: button_pins {
mux {
pins = "gpio16", "gpio54", "gpio24", "gpio25";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
mux {
pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio14",
"gpio15", "gpio55", "gpio56", "gpio57", "gpio58",
"gpio64", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
bias-pull-down;
};
data {
pins = "gpio18", "gpio19";
drive-strength = <10>;
};
cs {
pins = "gpio20";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio21";
drive-strength = <12>;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
};
usb_pwr_en_pins: usb_pwr_en_pins {
mux {
pins = "gpio22";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
output-high;
};
};
};

563
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts
View File

@ -1,563 +0,0 @@
/*
* BSD LICENSE
*
* Copyright (C) 2017 Christian Mehlis <christian@m3hlis.de>
* Copyright (C) 2018 Mathias Kresin <dev@kresin.me>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of any
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "qcom-ipq8064-v1.0.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
compatible = "compex,wpq864", "qcom,ipq8064";
model = "Compex WPQ864";
aliases {
mdio-gpio0 = &mdio0;
serial0 = &gsbi4_serial;
ethernet0 = &gmac1;
ethernet1 = &gmac0;
led-boot = &led_pass;
led-failsafe = &led_fail;
led-running = &led_pass;
led-upgrade = &led_pass;
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
rpm@108000 {
pinctrl-0 = <&rpm_pins>;
pinctrl-names = "default";
};
nand@1ac00000 {
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
mt29f2g08abbeah4@0 {
compatible = "qcom,nandcs";
reg = <0>;
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
SBL1@0 {
label = "SBL1";
reg = <0x0000000 0x0040000>;
read-only;
};
MIBIB@40000 {
label = "MIBIB";
reg = <0x0040000 0x0140000>;
read-only;
};
SBL2@180000 {
label = "SBL2";
reg = <0x0180000 0x0140000>;
read-only;
};
SBL3@2c0000 {
label = "SBL3";
reg = <0x02c0000 0x0280000>;
read-only;
};
DDRCONFIG@540000 {
label = "DDRCONFIG";
reg = <0x0540000 0x0120000>;
read-only;
};
SSD@660000 {
label = "SSD";
reg = <0x0660000 0x0120000>;
read-only;
};
TZ@780000 {
label = "TZ";
reg = <0x0780000 0x0280000>;
read-only;
};
RPM@a00000 {
label = "RPM";
reg = <0x0a00000 0x0280000>;
read-only;
};
APPSBL@c80000 {
label = "APPSBL";
reg = <0x0c80000 0x0500000>;
read-only;
};
APPSBLENV@1180000 {
label = "APPSBLENV";
reg = <0x1180000 0x0080000>;
};
ART@1200000 {
label = "ART";
reg = <0x1200000 0x0140000>;
};
ubi@1340000 {
label = "ubi";
reg = <0x1340000 0x4000000>;
};
BOOTCONFIG@5340000 {
label = "BOOTCONFIG";
reg = <0x5340000 0x0060000>;
};
SBL2-1@53a0000- {
label = "SBL2_1";
reg = <0x53a0000 0x0140000>;
read-only;
};
SBL3-1@54e0000 {
label = "SBL3_1";
reg = <0x54e0000 0x0280000>;
read-only;
};
DDRCONFIG-1@5760000 {
label = "DDRCONFIG_1";
reg = <0x5760000 0x0120000>;
read-only;
};
SSD-1@5880000 {
label = "SSD_1";
reg = <0x5880000 0x0120000>;
read-only;
};
TZ-1@59a0000 {
label = "TZ_1";
reg = <0x59a0000 0x0280000>;
read-only;
};
RPM-1@5c20000 {
label = "RPM_1";
reg = <0x5c20000 0x0280000>;
read-only;
};
BOOTCONFIG1@5ea0000 {
label = "BOOTCONFIG1";
reg = <0x5ea0000 0x0060000>;
};
APPSBL-1@5f00000 {
label = "APPSBL_1";
reg = <0x5f00000 0x0500000>;
read-only;
};
ubi-1@6400000 {
label = "ubi_1";
reg = <0x6400000 0x4000000>;
};
unused@a400000 {
label = "unused";
reg = <0xa400000 0x5c00000>;
};
};
};
};
};
mdio0: mdio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "virtual,mdio-gpio";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
ethernet-phy@4 {
reg = <4>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
rss4 {
label = "wpq864:green:rss4";
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
rss3 {
label = "wpq864:green:rss3";
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
rss2 {
label = "wpq864:orange:rss2";
gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
};
rss1 {
label = "wpq864:red:rss1";
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
led_pass: pass {
label = "wpq864:green:pass";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
};
led_fail: fail {
label = "wpq864:green:fail";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
usb {
label = "wpq864:green:usb";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb-pcie {
label = "wpq864:green:usb-pcie";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
beeper {
compatible = "gpio-beeper";
pinctrl-0 = <&beeper_pins>;
pinctrl-names = "default";
gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
};
};
&adm_dma {
status = "okay";
};
&gmac1 {
status = "okay";
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
phy-mode = "rgmii";
qcom,id = <1>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gsbi4 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
};
&gsbi4_serial {
status = "okay";
pinctrl-0 = <&uart0_pins>;
pinctrl-names = "default";
};
&gsbi5 {
status = "okay";
qcom,mode = <GSBI_PROT_SPI>;
spi@1a280000 {
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
s25fl256s1@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
spi-max-frequency = <50000000>;
};
};
};
&ss_phy_0 { /* USB3 port 0 SS phy */
status = "okay";
rx_eq = <2>;
tx_deamp_3_5db = <32>;
mpll = <160>;
};
&ss_phy_1 { /* USB3 port 1 SS phy */
status = "okay";
rx_eq = <2>;
tx_deamp_3_5db = <32>;
mpll = <160>;
};
&pcie0 {
status = "okay";
/delete-property/ pinctrl-0;
/delete-property/ pinctrl-names;
/delete-property/ perst-gpios;
};
&pcie1 {
status = "okay";
};
&pcie2 {
status = "okay";
/delete-property/ pinctrl-0;
/delete-property/ pinctrl-names;
/delete-property/ perst-gpios;
};
&qcom_pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinctrl0 {
pcie0_pcie2_perst {
pins = "gpio3";
function = "gpio";
drive-strength = <2>;
bias-disable;
output-high;
};
};
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio22",
"gpio23", "gpio24", "gpio25", "gpio53";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
button_pins: button_pins {
mux {
pins = "gpio54";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
beeper_pins: beeper_pins {
mux {
pins = "gpio55";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
rpm_pins: rpm_pins {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <10>;
bias-disable;
};
};
uart0_pins: uart0_pins {
mux {
pins = "gpio10", "gpio11";
function = "gsbi4";
drive-strength = <10>;
bias-disable;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19";
function = "gsbi5";
drive-strength = <10>;
bias-pull-down;
};
clk {
pins = "gpio21";
function = "gsbi5";
drive-strength = <12>;
bias-pull-down;
};
cs {
pins = "gpio20";
function = "gpio";
drive-strength = <10>;
bias-pull-up;
};
};
nand_pins: nand_pins {
disable {
pins = "gpio34", "gpio35", "gpio36", "gpio37",
"gpio38";
function = "nand";
drive-strength = <10>;
bias-disable;
};
pullups {
pins = "gpio39";
function = "nand";
drive-strength = <10>;
bias-pull-up;
};
hold {
pins = "gpio40", "gpio41", "gpio42", "gpio43",
"gpio44", "gpio45", "gpio46", "gpio47";
function = "nand";
drive-strength = <10>;
bias-bus-hold;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30",
"gpio31", "gpio32", "gpio51", "gpio52",
"gpio59", "gpio60", "gpio61", "gpio62";
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
};
};
&usb3_0 {
status = "okay";
};
&usb3_1 {
status = "okay";
};
&tcsr {
qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
};

520
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
View File

@ -1,520 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq8064-v2.0.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Buffalo WXR-2533DHP";
compatible = "buffalo,wxr-2533dhp", "qcom,ipq8064";
memory@42000000 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
serial0 = &gsbi4_serial;
led-boot = &power;
led-failsafe = &diag;
led-running = &power;
led-upgrade = &power;
};
chosen {
/* use "ubi_rootfs" volume in "ubi" partition as rootfs */
bootargs = "ubi.block=0,1 root=/dev/ubiblock0_1 rootfstype=squashfs";
stdout-path = "serial0:115200n8";
};
soc {
nand@1ac00000 {
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
cs@0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
ubi@0 {
label = "ubi";
reg = <0x0000000 0x4000000>;
};
rootfs_1@4000000 {
label = "rootfs_1";
reg = <0x4000000 0x4000000>;
};
};
};
};
mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x07600000 /* PAD0_MODE */
0x00008 0x01000000 /* PAD5_MODE */
0x0000c 0x00000080 /* PAD6_MODE */
0x00050 0xcc35cc35 /* LED_CTRL0 */
0x00054 0xca35ca35 /* LED_CTRL1 */
0x00058 0xc935c935 /* LED_CTRL2 */
0x0005c 0x03ffff00 /* LED_CTRL3 */
0x000e4 0x0006a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x0000007e /* PORT0_STATUS */
0x00094 0x0000007e /* PORT6_STATUS */
>;
};
ethernet-phy@4 {
reg = <4>;
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
usb {
label = "wxr-2533dhp:green:usb";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "usbport";
trigger-sources = <&hub_port0 &hub_port1>;
};
guestport {
label = "wxr-2533dhp:green:guestport";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
diag: diag {
label = "wxr-2533dhp:orange:diag";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
internet_orange {
label = "wxr-2533dhp:orange:internet";
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
};
internet_white {
label = "wxr-2533dhp:white:internet";
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
wireless_orange {
label = "wxr-2533dhp:orange:wireless";
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
wireless_white {
label = "wxr-2533dhp:white:wireless";
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
};
router_orange {
label = "wxr-2533dhp:orange:router";
gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
};
router_white {
label = "wxr-2533dhp:white:router";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
};
power: power {
label = "wxr-2533dhp:white:power";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
power {
label = "power";
gpios = <&qcom_pinmux 58 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
eject {
label = "eject";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_EJECTCD>;
};
guest {
label = "guest";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
ap {
label = "ap";
gpios = <&qcom_pinmux 55 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
linux,input-type = <EV_SW>;
};
router {
label = "router";
gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
linux,input-type = <EV_SW>;
};
auto {
label = "auto";
gpios = <&qcom_pinmux 57 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
linux,input-type = <EV_SW>;
};
};
};
&adm_dma {
status = "okay";
};
&gmac1 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mtd-mac-address = <&ART 6>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
mtd-mac-address = <&ART 0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gsbi4 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
};
&gsbi4_serial {
status = "okay";
pinctrl-0 = <&uart0_pins>;
pinctrl-names = "default";
};
&gsbi5 {
status = "okay";
qcom,mode = <GSBI_PROT_SPI>;
spi@1a280000 {
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
SBL1@0 {
label = "SBL1";
reg = <0x0 0x10000>;
read-only;
};
MIBIB@10000 {
label = "MIBIB";
reg = <0x10000 0x20000>;
read-only;
};
SBL2@30000 {
label = "SBL2";
reg = <0x30000 0x30000>;
read-only;
};
SBL3@60000 {
label = "SBL3";
reg = <0x60000 0x30000>;
read-only;
};
DDRCONFIG@90000 {
label = "DDRCONFIG";
reg = <0x90000 0x10000>;
read-only;
};
SSD@a0000 {
label = "SSD";
reg = <0xa0000 0x10000>;
read-only;
};
TZ@b0000 {
label = "TZ";
reg = <0xb0000 0x30000>;
read-only;
};
RPM@e0000 {
label = "RPM";
reg = <0xe0000 0x20000>;
read-only;
};
APPSBL@100000 {
label = "APPSBL";
reg = <0x100000 0x70000>;
read-only;
};
APPSBLENV@170000 {
label = "APPSBLENV";
reg = <0x170000 0x10000>;
read-only;
};
ART: ART@180000 {
label = "ART";
reg = <0x180000 0x40000>;
read-only;
};
BOOTCONFIG@1c0000 {
label = "BOOTCONFIG";
reg = <0x1c0000 0x10000>;
read-only;
};
APPSBL_1@1d0000 {
label = "APPSBL_1";
reg = <0x1d0000 0x70000>;
read-only;
};
};
};
};
};
&usb3_0 {
status = "okay";
pinctrl-0 = <&usb_pwr_en_pins>;
pinctrl-names = "default";
};
&usb3_1 {
status = "okay";
};
&dwc3_0 {
#address-cells = <1>;
#size-cells = <0>;
hub_port0: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&dwc3_1 {
#address-cells = <1>;
#size-cells = <0>;
hub_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&pcie0 {
status = "okay";
};
&pcie1 {
status = "okay";
force_gen1 = <1>;
};
&qcom_pinmux {
button_pins: button_pins {
mux {
pins = "gpio6", "gpio54", "gpio55", "gpio56", "gpio57",
"gpio58", "gpio64", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio22",
"gpio23", "gpio24", "gpio25", "gpio26", "gpio53";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
uart0_pins: uart0_pins {
mux {
pins = "gpio10", "gpio11";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
bias-pull-down;
};
data {
pins = "gpio18", "gpio19";
drive-strength = <10>;
};
cs{
pins = "gpio20";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio21";
drive-strength = <12>;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
nand_pins: nand_pins {
disable {
pins = "gpio34", "gpio35", "gpio36",
"gpio37", "gpio38";
function = "nand";
drive-strength = <10>;
bias-disable;
};
pullups {
pins = "gpio39";
function = "nand";
drive-strength = <10>;
bias-pull-up;
};
hold {
pins = "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
function = "nand";
drive-strength = <10>;
bias-bus-hold;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
};
usb_pwr_en_pins: usb_pwr_en_pins {
mux{
pins = "gpio68";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
output-high;
};
};
};

1512
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064.dtsi
View File

File diff suppressed because it is too large Load Diff

371
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
View File

@ -1,371 +0,0 @@
#include "qcom-ipq8065.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "ZyXEL NBG6817";
compatible = "zyxel,nbg6817", "qcom,ipq8065", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
sdcc1 = &sdcc1;
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
chosen {
bootargs = "rootfstype=squashfs,ext4 rootwait noinitrd";
stdout-path = "serial0:115200n8";
append-rootblock = "root=/dev/mmcblk0p";
};
soc {
pinmux@800000 {
button_pins: button_pins {
mux {
pins = "gpio53", "gpio54", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
mux {
pins = "gpio9", "gpio26", "gpio33", "gpio64";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
clk {
pins = "gpio1";
input-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
tx {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
input-disable;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
drive-strength = <10>;
bias-none;
};
cs {
pins = "gpio20";
drive-strength = <12>;
};
};
usb0_pwr_en_pins: usb0_pwr_en_pins {
mux {
pins = "gpio16", "gpio17";
function = "gpio";
drive-strength = <12>;
};
pwr {
pins = "gpio17";
bias-pull-down;
output-high;
};
ovc {
pins = "gpio16";
bias-pull-up;
};
};
usb1_pwr_en_pins: usb1_pwr_en_pins {
mux {
pins = "gpio14", "gpio15";
function = "gpio";
drive-strength = <12>;
};
pwr {
pins = "gpio14";
bias-pull-down;
output-high;
};
ovc {
pins = "gpio15";
bias-pull-up;
};
};
};
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
serial@16340000 {
status = "okay";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "okay";
spi4: spi@1a280000 {
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash: m25p80@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <51200000>;
reg = <0>;
partitions {
compatible = "qcom,smem";
};
};
};
};
usb3_0: usb3@110f8800 {
status = "okay";
pinctrl-0 = <&usb0_pwr_en_pins>;
pinctrl-names = "default";
};
usb3_1: usb3@100f8800 {
status = "okay";
pinctrl-0 = <&usb1_pwr_en_pins>;
pinctrl-names = "default";
};
pcie0: pci@1b500000 {
status = "okay";
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie0_pins>;
pinctrl-names = "default";
};
pcie1: pci@1b700000 {
status = "okay";
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
force_gen1 = <1>;
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0xaa545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
0x00978 0x19008643 /* QM_PORT1_CTRL0 */
0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
0x00980 0x19008643 /* QM_PORT2_CTRL0 */
0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
0x00988 0x19008643 /* QM_PORT3_CTRL0 */
0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
0x00990 0x19008643 /* QM_PORT4_CTRL0 */
0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
qca,ar8327-initvals = <
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x0000c 0x80 /* PAD6_MODE */
>;
};
};
gmac1: ethernet@37200000 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <0>;
qcom,rgmii_delay = <1>;
qcom,phy_mii_type = <0>;
qcom,emulation = <0>;
qcom,irq = <255>;
mdiobus = <&mdio0>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
fixed-link {
speed = <1000>;
full-duplex;
};
};
gmac2: ethernet@37400000 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
qcom,phy_mdio_addr = <0>; /* none */
qcom,poll_required = <0>; /* no polling */
qcom,rgmii_delay = <0>;
qcom,phy_mii_type = <1>;
qcom,emulation = <0>;
qcom,irq = <258>;
mdiobus = <&mdio0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
amba {
sdcc1: sdcc@12400000 {
status = "okay";
};
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
linux,input-type = <EV_SW>;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
internet {
label = "nbg6817:white:internet";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
power: power {
label = "nbg6817:white:power";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
wifi2g {
label = "nbg6817:amber:wifi2g";
gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
};
/* wifi2g amber from the manual is missing */
wifi5g {
label = "nbg6817:amber:wifi5g";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
/* wifi5g amber from the manual is missing */
};
};
&adm_dma {
status = "okay";
};

531
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
View File

@ -1,531 +0,0 @@
#include "qcom-ipq8065.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Netgear Nighthawk X4S R7800";
compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
rsvd@5fe00000 {
reg = <0x5fe00000 0x200000>;
reusable;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
led-boot = &power_white;
led-failsafe = &power_amber;
led-running = &power_white;
led-upgrade = &power_amber;
label-mac-device = &gmac2;
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
pinmux@800000 {
button_pins: button_pins {
mux {
pins = "gpio6", "gpio54", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
"gpio24","gpio26", "gpio53", "gpio64";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
nand_pins: nand_pins {
disable {
pins = "gpio34", "gpio35", "gpio36",
"gpio37", "gpio38";
function = "nand";
drive-strength = <10>;
bias-disable;
};
pullups {
pins = "gpio39";
function = "nand";
drive-strength = <10>;
bias-pull-up;
};
hold {
pins = "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
function = "nand";
drive-strength = <10>;
bias-bus-hold;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
clk {
pins = "gpio1";
input-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
tx {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
input-disable;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
bias-pull-down;
};
data {
pins = "gpio18", "gpio19";
drive-strength = <10>;
};
cs {
pins = "gpio20";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio21";
drive-strength = <12>;
};
};
spi6_pins: spi6_pins {
mux {
pins = "gpio55", "gpio56", "gpio58";
function = "gsbi6";
bias-pull-down;
};
mosi {
pins = "gpio55";
drive-strength = <12>;
};
miso {
pins = "gpio56";
drive-strength = <14>;
};
cs {
pins = "gpio57";
drive-strength = <12>;
bias-pull-up;
};
clk {
pins = "gpio58";
drive-strength = <12>;
};
reset {
pins = "gpio33";
drive-strength = <10>;
bias-pull-down;
output-high;
};
};
usb0_pwr_en_pins: usb0_pwr_en_pins {
mux {
pins = "gpio15";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
};
usb1_pwr_en_pins: usb1_pwr_en_pins {
mux {
pins = "gpio16", "gpio68";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
};
};
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
serial@16340000 {
status = "okay";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
sata-phy@1b400000 {
status = "okay";
};
sata@29000000 {
ports-implemented = <0x1>;
status = "okay";
};
usb3_0: usb3@110f8800 {
status = "okay";
pinctrl-0 = <&usb0_pwr_en_pins>;
pinctrl-names = "default";
};
usb3_1: usb3@100f8800 {
status = "okay";
pinctrl-0 = <&usb1_pwr_en_pins>;
pinctrl-names = "default";
};
pcie0: pci@1b500000 {
status = "okay";
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "pci168c,0046";
reg = <0x00010000 0 0 0 0>;
mtd-mac-address = <&art 6>;
mtd-mac-address-increment = <(1)>;
};
};
};
pcie1: pci@1b700000 {
status = "okay";
force_gen1 = <1>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "pci168c,0046";
reg = <0x00010000 0 0 0 0>;
mtd-mac-address = <&art 6>;
mtd-mac-address-increment = <(2)>;
};
};
};
nand@1ac00000 {
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
cs0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
qcadata@0 {
label = "qcadata";
reg = <0x0000000 0x0c80000>;
read-only;
};
APPSBL@c80000 {
label = "APPSBL";
reg = <0x0c80000 0x0500000>;
read-only;
};
APPSBLENV@1180000 {
label = "APPSBLENV";
reg = <0x1180000 0x0080000>;
read-only;
};
art: art@1200000 {
label = "art";
reg = <0x1200000 0x0140000>;
read-only;
};
artbak: art@1340000 {
label = "artbak";
reg = <0x1340000 0x0140000>;
read-only;
};
kernel@1480000 {
label = "kernel";
reg = <0x1480000 0x0400000>;
};
ubi@1880000 {
label = "ubi";
reg = <0x1880000 0x6080000>;
};
reserve@7900000 {
label = "reserve";
reg = <0x7900000 0x0700000>;
read-only;
};
};
};
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0xaa545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
0x00978 0x19008643 /* QM_PORT1_CTRL0 */
0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
0x00980 0x19008643 /* QM_PORT2_CTRL0 */
0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
0x00988 0x19008643 /* QM_PORT3_CTRL0 */
0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
0x00990 0x19008643 /* QM_PORT4_CTRL0 */
0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
>;
qca,ar8327-vlans = <
0x1 0x5e /* VLAN1 Ports 1/2/3/4/6 */
0x2 0x21 /* VLAN2 Ports 0/5 */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
qca,ar8327-initvals = <
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x0000c 0x80 /* PAD6_MODE */
>;
};
};
gmac1: ethernet@37200000 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <0>;
qcom,rgmii_delay = <1>;
qcom,phy_mii_type = <0>;
qcom,emulation = <0>;
qcom,irq = <255>;
mdiobus = <&mdio0>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mtd-mac-address = <&art 6>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
gmac2: ethernet@37400000 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
qcom,phy_mdio_addr = <0>; /* none */
qcom,poll_required = <0>; /* no polling */
qcom,rgmii_delay = <0>;
qcom,phy_mii_type = <1>;
qcom,emulation = <0>;
qcom,irq = <258>;
mdiobus = <&mdio0>;
mtd-mac-address = <&art 0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
debounce-interval = <60>;
wakeup-source;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
power_white: power_white {
label = "r7800:white:power";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
power_amber: power_amber {
label = "r7800:amber:power";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
wan_white {
label = "r7800:white:wan";
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
wan_amber {
label = "r7800:amber:wan";
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
usb1 {
label = "r7800:white:usb1";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb2 {
label = "r7800:white:usb2";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
esata {
label = "r7800:white:esata";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
wifi {
label = "r7800:white:wifi";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
wps {
label = "r7800:white:wps";
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
};
};
};
&adm_dma {
status = "okay";
};

128
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065.dtsi
View File

@ -1,128 +0,0 @@
#include "qcom-ipq8064-v2.0.dtsi"
/ {
model = "Qualcomm IPQ8065";
compatible = "qcom,ipq8065", "qcom,ipq8064";
soc: soc {
rpm@108000 {
regulators {
smb208_s2a: s2a {
regulator-min-microvolt = <775000>;
regulator-max-microvolt = <1275000>;
};
smb208_s2b: s2b {
regulator-min-microvolt = <775000>;
regulator-max-microvolt = <1275000>;
};
};
};
};
cpus {
qcom,l2 {
qcom,l2-cpufreq = <384000000 600000000 1400000000>;
};
idle-states {
CPU_SPC: spc {
status = "disabled";
};
};
};
};
&opp_table0 {
compatible = "operating-points-v2-qcom-cpu";
nvmem-cells = <&speedbin_efuse>;
/*
* On ipq8065 1.2 ghz freq is not present
* Remove it to make cpufreq work and not
* complain for missing definition
*/
/delete-node/opp-1200000000;
opp-384000000 {
opp-hz = /bits/ 64 <384000000>;
opp-microvolt-speed0-pvs0-v0 = <975000>;
opp-microvolt-speed0-pvs1-v0 = <950000>;
opp-microvolt-speed0-pvs2-v0 = <925000>;
opp-microvolt-speed0-pvs3-v0 = <900000>;
opp-microvolt-speed0-pvs4-v0 = <875000>;
opp-microvolt-speed0-pvs5-v0 = <825000>;
opp-microvolt-speed0-pvs6-v0 = <775000>;
opp-supported-hw = <0x1>;
clock-latency-ns = <100000>;
};
opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt-speed0-pvs0-v0 = <1000000>;
opp-microvolt-speed0-pvs1-v0 = <975000>;
opp-microvolt-speed0-pvs2-v0 = <950000>;
opp-microvolt-speed0-pvs3-v0 = <925000>;
opp-microvolt-speed0-pvs4-v0 = <900000>;
opp-microvolt-speed0-pvs5-v0 = <850000>;
opp-microvolt-speed0-pvs6-v0 = <800000>;
opp-supported-hw = <0x1>;
clock-latency-ns = <100000>;
};
opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt-speed0-pvs0-v0 = <1050000>;
opp-microvolt-speed0-pvs1-v0 = <1025000>;
opp-microvolt-speed0-pvs2-v0 = <1000000>;
opp-microvolt-speed0-pvs3-v0 = <975000>;
opp-microvolt-speed0-pvs4-v0 = <950000>;
opp-microvolt-speed0-pvs5-v0 = <900000>;
opp-microvolt-speed0-pvs6-v0 = <850000>;
opp-supported-hw = <0x1>;
clock-latency-ns = <100000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt-speed0-pvs0-v0 = <1100000>;
opp-microvolt-speed0-pvs1-v0 = <1075000>;
opp-microvolt-speed0-pvs2-v0 = <1050000>;
opp-microvolt-speed0-pvs3-v0 = <1025000>;
opp-microvolt-speed0-pvs4-v0 = <1000000>;
opp-microvolt-speed0-pvs5-v0 = <950000>;
opp-microvolt-speed0-pvs6-v0 = <900000>;
opp-supported-hw = <0x1>;
clock-latency-ns = <100000>;
};
opp-1400000000 {
opp-hz = /bits/ 64 <1400000000>;
opp-microvolt-speed0-pvs0-v0 = <1175000>;
opp-microvolt-speed0-pvs1-v0 = <1150000>;
opp-microvolt-speed0-pvs2-v0 = <1125000>;
opp-microvolt-speed0-pvs3-v0 = <1100000>;
opp-microvolt-speed0-pvs4-v0 = <1075000>;
opp-microvolt-speed0-pvs5-v0 = <1025000>;
opp-microvolt-speed0-pvs6-v0 = <975000>;
opp-supported-hw = <0x1>;
clock-latency-ns = <100000>;
};
opp-1725000000 {
opp-hz = /bits/ 64 <1725000000>;
opp-microvolt-speed0-pvs0-v0 = <1262500>;
opp-microvolt-speed0-pvs1-v0 = <1225000>;
opp-microvolt-speed0-pvs2-v0 = <1200000>;
opp-microvolt-speed0-pvs3-v0 = <1175000>;
opp-microvolt-speed0-pvs4-v0 = <1150000>;
opp-microvolt-speed0-pvs5-v0 = <1100000>;
opp-microvolt-speed0-pvs6-v0 = <1050000>;
opp-supported-hw = <0x1>;
clock-latency-ns = <100000>;
};
};

71
target/linux/ipq806x/patches-4.14/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch
View File

@ -1,71 +0,0 @@
From 28d0ed88f536dd639adf1b0c7c08e04be3c8f294 Mon Sep 17 00:00:00 2001
From: Thomas Pedersen <twp@codeaurora.org>
Date: Mon, 16 May 2016 17:58:50 -0700
Subject: [PATCH 01/69] dtbindings: qcom_adm: Fix channel specifiers
Original patch from Andy Gross.
This patch removes the crci information from the dma
channel property. At least one client device requires
using more than one CRCI value for a channel. This does
not match the current binding and the crci information
needs to be removed.
Instead, the client device will provide this information
via other means.
Signed-off-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
---
Documentation/devicetree/bindings/dma/qcom_adm.txt | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
--- a/Documentation/devicetree/bindings/dma/qcom_adm.txt
+++ b/Documentation/devicetree/bindings/dma/qcom_adm.txt
@@ -4,8 +4,7 @@ Required properties:
- compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960
- reg: Address range for DMA registers
- interrupts: Should contain one interrupt shared by all channels
-- #dma-cells: must be <2>. First cell denotes the channel number. Second cell
- denotes CRCI (client rate control interface) flow control assignment.
+- #dma-cells: must be <1>. First cell denotes the channel number.
- clocks: Should contain the core clock and interface clock.
- clock-names: Must contain "core" for the core clock and "iface" for the
interface clock.
@@ -22,7 +21,7 @@ Example:
compatible = "qcom,adm";
reg = <0x18300000 0x100000>;
interrupts = <0 170 0>;
- #dma-cells = <2>;
+ #dma-cells = <1>;
clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
clock-names = "core", "iface";
@@ -35,15 +34,12 @@ Example:
qcom,ee = <0>;
};
-DMA clients must use the format descripted in the dma.txt file, using a three
+DMA clients must use the format descripted in the dma.txt file, using a two
cell specifier for each channel.
-Each dmas request consists of 3 cells:
+Each dmas request consists of two cells:
1. phandle pointing to the DMA controller
2. channel number
- 3. CRCI assignment, if applicable. If no CRCI flow control is required, use 0.
- The CRCI is used for flow control. It identifies the peripheral device that
- is the source/destination for the transferred data.
Example:
@@ -55,7 +51,7 @@ Example:
cs-gpios = <&qcom_pinmux 20 0>;
- dmas = <&adm_dma 6 9>,
- <&adm_dma 5 10>;
+ dmas = <&adm_dma 6>,
+ <&adm_dma 5>;
dma-names = "rx", "tx";
};

966
target/linux/ipq806x/patches-4.14/0002-dmaengine-Add-ADM-driver.patch
View File

@ -1,966 +0,0 @@
From 563fa24db4e529c5a3311928d73a8a90531ee527 Mon Sep 17 00:00:00 2001
From: Thomas Pedersen <twp@codeaurora.org>
Date: Mon, 16 May 2016 17:58:51 -0700
Subject: [PATCH 02/69] dmaengine: Add ADM driver
Original patch by Andy Gross.
Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA
controller found in the MSM8x60 and IPQ/APQ8064 platforms.
The ADM supports both memory to memory transactions and memory
to/from peripheral device transactions. The controller also provides flow
control capabilities for transactions to/from peripheral devices.
The initial release of this driver supports slave transfers to/from peripherals
and also incorporates CRCI (client rate control interface) flow control.
Signed-off-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
---
drivers/dma/qcom/Kconfig | 10 +
drivers/dma/qcom/Makefile | 1 +
drivers/dma/qcom/qcom_adm.c | 900 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 911 insertions(+)
create mode 100644 drivers/dma/qcom/qcom_adm.c
--- a/drivers/dma/qcom/Kconfig
+++ b/drivers/dma/qcom/Kconfig
@@ -27,3 +27,13 @@ config QCOM_HIDMA
(user to kernel, kernel to kernel, etc.). It only supports
memcpy interface. The core is not intended for general
purpose slave DMA.
+
+config QCOM_ADM
+ tristate "Qualcomm ADM support"
+ depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
+ select DMA_ENGINE
+ select DMA_VIRTUAL_CHANNELS
+ ---help---
+ Enable support for the Qualcomm ADM DMA controller. This controller
+ provides DMA capabilities for both general purpose and on-chip
+ peripheral devices.
--- a/drivers/dma/qcom/Makefile
+++ b/drivers/dma/qcom/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mg
hdma_mgmt-objs := hidma_mgmt.o hidma_mgmt_sys.o
obj-$(CONFIG_QCOM_HIDMA) += hdma.o
hdma-objs := hidma_ll.o hidma.o hidma_dbg.o
+obj-$(CONFIG_QCOM_ADM) += qcom_adm.o
--- /dev/null
+++ b/drivers/dma/qcom/qcom_adm.c
@@ -0,0 +1,914 @@
+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_dma.h>
+#include <linux/reset.h>
+#include <linux/clk.h>
+#include <linux/dmaengine.h>
+
+#include "../dmaengine.h"
+#include "../virt-dma.h"
+
+/* ADM registers - calculated from channel number and security domain */
+#define ADM_CHAN_MULTI 0x4
+#define ADM_CI_MULTI 0x4
+#define ADM_CRCI_MULTI 0x4
+#define ADM_EE_MULTI 0x800
+#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan)
+#define ADM_EE_OFFS(ee) (ADM_EE_MULTI * ee)
+#define ADM_CHAN_EE_OFFS(chan, ee) (ADM_CHAN_OFFS(chan) + ADM_EE_OFFS(ee))
+#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan)
+#define ADM_CI_OFFS(ci) (ADM_CHAN_OFF(ci))
+#define ADM_CH_CMD_PTR(chan, ee) (ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_RSLT(chan, ee) (0x40 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_FLUSH_STATE0(chan, ee) (0x80 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_STATUS_SD(chan, ee) (0x200 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_CONF(chan) (0x240 + ADM_CHAN_OFFS(chan))
+#define ADM_CH_RSLT_CONF(chan, ee) (0x300 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_SEC_DOMAIN_IRQ_STATUS(ee) (0x380 + ADM_EE_OFFS(ee))
+#define ADM_CI_CONF(ci) (0x390 + ci * ADM_CI_MULTI)
+#define ADM_GP_CTL 0x3d8
+#define ADM_CRCI_CTL(crci, ee) (0x400 + crci * ADM_CRCI_MULTI + \
+ ADM_EE_OFFS(ee))
+
+/* channel status */
+#define ADM_CH_STATUS_VALID BIT(1)
+
+/* channel result */
+#define ADM_CH_RSLT_VALID BIT(31)
+#define ADM_CH_RSLT_ERR BIT(3)
+#define ADM_CH_RSLT_FLUSH BIT(2)
+#define ADM_CH_RSLT_TPD BIT(1)
+
+/* channel conf */
+#define ADM_CH_CONF_SHADOW_EN BIT(12)
+#define ADM_CH_CONF_MPU_DISABLE BIT(11)
+#define ADM_CH_CONF_PERM_MPU_CONF BIT(9)
+#define ADM_CH_CONF_FORCE_RSLT_EN BIT(7)
+#define ADM_CH_CONF_SEC_DOMAIN(ee) (((ee & 0x3) << 4) | ((ee & 0x4) << 11))
+
+/* channel result conf */
+#define ADM_CH_RSLT_CONF_FLUSH_EN BIT(1)
+#define ADM_CH_RSLT_CONF_IRQ_EN BIT(0)
+
+/* CRCI CTL */
+#define ADM_CRCI_CTL_MUX_SEL BIT(18)
+#define ADM_CRCI_CTL_RST BIT(17)
+
+/* CI configuration */
+#define ADM_CI_RANGE_END(x) (x << 24)
+#define ADM_CI_RANGE_START(x) (x << 16)
+#define ADM_CI_BURST_4_WORDS BIT(2)
+#define ADM_CI_BURST_8_WORDS BIT(3)
+
+/* GP CTL */
+#define ADM_GP_CTL_LP_EN BIT(12)
+#define ADM_GP_CTL_LP_CNT(x) (x << 8)
+
+/* Command pointer list entry */
+#define ADM_CPLE_LP BIT(31)
+#define ADM_CPLE_CMD_PTR_LIST BIT(29)
+
+/* Command list entry */
+#define ADM_CMD_LC BIT(31)
+#define ADM_CMD_DST_CRCI(n) (((n) & 0xf) << 7)
+#define ADM_CMD_SRC_CRCI(n) (((n) & 0xf) << 3)
+
+#define ADM_CMD_TYPE_SINGLE 0x0
+#define ADM_CMD_TYPE_BOX 0x3
+
+#define ADM_CRCI_MUX_SEL BIT(4)
+#define ADM_DESC_ALIGN 8
+#define ADM_MAX_XFER (SZ_64K-1)
+#define ADM_MAX_ROWS (SZ_64K-1)
+#define ADM_MAX_CHANNELS 16
+
+struct adm_desc_hw_box {
+ u32 cmd;
+ u32 src_addr;
+ u32 dst_addr;
+ u32 row_len;
+ u32 num_rows;
+ u32 row_offset;
+};
+
+struct adm_desc_hw_single {
+ u32 cmd;
+ u32 src_addr;
+ u32 dst_addr;
+ u32 len;
+};
+
+struct adm_async_desc {
+ struct virt_dma_desc vd;
+ struct adm_device *adev;
+
+ size_t length;
+ enum dma_transfer_direction dir;
+ dma_addr_t dma_addr;
+ size_t dma_len;
+
+ void *cpl;
+ dma_addr_t cp_addr;
+ u32 crci;
+ u32 mux;
+ u32 blk_size;
+};
+
+struct adm_chan {
+ struct virt_dma_chan vc;
+ struct adm_device *adev;
+
+ /* parsed from DT */
+ u32 id; /* channel id */
+
+ struct adm_async_desc *curr_txd;
+ struct dma_slave_config slave;
+ struct list_head node;
+
+ int error;
+ int initialized;
+};
+
+static inline struct adm_chan *to_adm_chan(struct dma_chan *common)
+{
+ return container_of(common, struct adm_chan, vc.chan);
+}
+
+struct adm_device {
+ void __iomem *regs;
+ struct device *dev;
+ struct dma_device common;
+ struct device_dma_parameters dma_parms;
+ struct adm_chan *channels;
+
+ u32 ee;
+
+ struct clk *core_clk;
+ struct clk *iface_clk;
+
+ struct reset_control *clk_reset;
+ struct reset_control *c0_reset;
+ struct reset_control *c1_reset;
+ struct reset_control *c2_reset;
+ int irq;
+};
+
+/**
+ * adm_free_chan - Frees dma resources associated with the specific channel
+ *
+ * Free all allocated descriptors associated with this channel
+ *
+ */
+static void adm_free_chan(struct dma_chan *chan)
+{
+ /* free all queued descriptors */
+ vchan_free_chan_resources(to_virt_chan(chan));
+}
+
+/**
+ * adm_get_blksize - Get block size from burst value
+ *
+ */
+static int adm_get_blksize(unsigned int burst)
+{
+ int ret;
+
+ switch (burst) {
+ case 16:
+ case 32:
+ case 64:
+ case 128:
+ ret = ffs(burst>>4) - 1;
+ break;
+ case 192:
+ ret = 4;
+ break;
+ case 256:
+ ret = 5;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+/**
+ * adm_process_fc_descriptors - Process descriptors for flow controlled xfers
+ *
+ * @achan: ADM channel
+ * @desc: Descriptor memory pointer
+ * @sg: Scatterlist entry
+ * @crci: CRCI value
+ * @burst: Burst size of transaction
+ * @direction: DMA transfer direction
+ */
+static void *adm_process_fc_descriptors(struct adm_chan *achan,
+ void *desc, struct scatterlist *sg, u32 crci, u32 burst,
+ enum dma_transfer_direction direction)
+{
+ struct adm_desc_hw_box *box_desc = NULL;
+ struct adm_desc_hw_single *single_desc;
+ u32 remainder = sg_dma_len(sg);
+ u32 rows, row_offset, crci_cmd;
+ u32 mem_addr = sg_dma_address(sg);
+ u32 *incr_addr = &mem_addr;
+ u32 *src, *dst;
+
+ if (direction == DMA_DEV_TO_MEM) {
+ crci_cmd = ADM_CMD_SRC_CRCI(crci);
+ row_offset = burst;
+ src = &achan->slave.src_addr;
+ dst = &mem_addr;
+ } else {
+ crci_cmd = ADM_CMD_DST_CRCI(crci);
+ row_offset = burst << 16;
+ src = &mem_addr;
+ dst = &achan->slave.dst_addr;
+ }
+
+ while (remainder >= burst) {
+ box_desc = desc;
+ box_desc->cmd = ADM_CMD_TYPE_BOX | crci_cmd;
+ box_desc->row_offset = row_offset;
+ box_desc->src_addr = *src;
+ box_desc->dst_addr = *dst;
+
+ rows = remainder / burst;
+ rows = min_t(u32, rows, ADM_MAX_ROWS);
+ box_desc->num_rows = rows << 16 | rows;
+ box_desc->row_len = burst << 16 | burst;
+
+ *incr_addr += burst * rows;
+ remainder -= burst * rows;
+ desc += sizeof(*box_desc);
+ }
+
+ /* if leftover bytes, do one single descriptor */
+ if (remainder) {
+ single_desc = desc;
+ single_desc->cmd = ADM_CMD_TYPE_SINGLE | crci_cmd;
+ single_desc->len = remainder;
+ single_desc->src_addr = *src;
+ single_desc->dst_addr = *dst;
+ desc += sizeof(*single_desc);
+
+ if (sg_is_last(sg))
+ single_desc->cmd |= ADM_CMD_LC;
+ } else {
+ if (box_desc && sg_is_last(sg))
+ box_desc->cmd |= ADM_CMD_LC;
+ }
+
+ return desc;
+}
+
+/**
+ * adm_process_non_fc_descriptors - Process descriptors for non-fc xfers
+ *
+ * @achan: ADM channel
+ * @desc: Descriptor memory pointer
+ * @sg: Scatterlist entry
+ * @direction: DMA transfer direction
+ */
+static void *adm_process_non_fc_descriptors(struct adm_chan *achan,
+ void *desc, struct scatterlist *sg,
+ enum dma_transfer_direction direction)
+{
+ struct adm_desc_hw_single *single_desc;
+ u32 remainder = sg_dma_len(sg);
+ u32 mem_addr = sg_dma_address(sg);
+ u32 *incr_addr = &mem_addr;
+ u32 *src, *dst;
+
+ if (direction == DMA_DEV_TO_MEM) {
+ src = &achan->slave.src_addr;
+ dst = &mem_addr;
+ } else {
+ src = &mem_addr;
+ dst = &achan->slave.dst_addr;
+ }
+
+ do {
+ single_desc = desc;
+ single_desc->cmd = ADM_CMD_TYPE_SINGLE;
+ single_desc->src_addr = *src;
+ single_desc->dst_addr = *dst;
+ single_desc->len = (remainder > ADM_MAX_XFER) ?
+ ADM_MAX_XFER : remainder;
+
+ remainder -= single_desc->len;
+ *incr_addr += single_desc->len;
+ desc += sizeof(*single_desc);
+ } while (remainder);
+
+ /* set last command if this is the end of the whole transaction */
+ if (sg_is_last(sg))
+ single_desc->cmd |= ADM_CMD_LC;
+
+ return desc;
+}
+
+/**
+ * adm_prep_slave_sg - Prep slave sg transaction
+ *
+ * @chan: dma channel
+ * @sgl: scatter gather list
+ * @sg_len: length of sg
+ * @direction: DMA transfer direction
+ * @flags: DMA flags
+ * @context: transfer context (unused)
+ */
+static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
+ struct scatterlist *sgl, unsigned int sg_len,
+ enum dma_transfer_direction direction, unsigned long flags,
+ void *context)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ struct adm_device *adev = achan->adev;
+ struct adm_async_desc *async_desc;
+ struct scatterlist *sg;
+ dma_addr_t cple_addr;
+ u32 i, burst;
+ u32 single_count = 0, box_count = 0, crci = 0;
+ void *desc;
+ u32 *cple;
+ int blk_size = 0;
+
+ if (!is_slave_direction(direction)) {
+ dev_err(adev->dev, "invalid dma direction\n");
+ return NULL;
+ }
+
+ /*
+ * get burst value from slave configuration
+ */
+ burst = (direction == DMA_MEM_TO_DEV) ?
+ achan->slave.dst_maxburst :
+ achan->slave.src_maxburst;
+
+ /* if using flow control, validate burst and crci values */
+ if (achan->slave.device_fc) {
+
+ blk_size = adm_get_blksize(burst);
+ if (blk_size < 0) {
+ dev_err(adev->dev, "invalid burst value: %d\n",
+ burst);
+ return ERR_PTR(-EINVAL);
+ }
+
+ crci = achan->slave.slave_id & 0xf;
+ if (!crci || achan->slave.slave_id > 0x1f) {
+ dev_err(adev->dev, "invalid crci value\n");
+ return ERR_PTR(-EINVAL);
+ }
+ }
+
+ /* iterate through sgs and compute allocation size of structures */
+ for_each_sg(sgl, sg, sg_len, i) {
+ if (achan->slave.device_fc) {
+ box_count += DIV_ROUND_UP(sg_dma_len(sg) / burst,
+ ADM_MAX_ROWS);
+ if (sg_dma_len(sg) % burst)
+ single_count++;
+ } else {
+ single_count += DIV_ROUND_UP(sg_dma_len(sg),
+ ADM_MAX_XFER);
+ }
+ }
+
+ async_desc = kzalloc(sizeof(*async_desc), GFP_ATOMIC);
+ if (!async_desc)
+ return ERR_PTR(-ENOMEM);
+
+ if (crci)
+ async_desc->mux = achan->slave.slave_id & ADM_CRCI_MUX_SEL ?
+ ADM_CRCI_CTL_MUX_SEL : 0;
+ async_desc->crci = crci;
+ async_desc->blk_size = blk_size;
+ async_desc->dma_len = single_count * sizeof(struct adm_desc_hw_single) +
+ box_count * sizeof(struct adm_desc_hw_box) +
+ sizeof(*cple) + 2 * ADM_DESC_ALIGN;
+
+ async_desc->cpl = kzalloc(async_desc->dma_len, GFP_ATOMIC);
+ if (!async_desc->cpl)
+ goto free;
+
+ async_desc->adev = adev;
+
+ /* both command list entry and descriptors must be 8 byte aligned */
+ cple = PTR_ALIGN(async_desc->cpl, ADM_DESC_ALIGN);
+ desc = PTR_ALIGN(cple + 1, ADM_DESC_ALIGN);
+
+ for_each_sg(sgl, sg, sg_len, i) {
+ async_desc->length += sg_dma_len(sg);
+
+ if (achan->slave.device_fc)
+ desc = adm_process_fc_descriptors(achan, desc, sg, crci,
+ burst, direction);
+ else
+ desc = adm_process_non_fc_descriptors(achan, desc, sg,
+ direction);
+ }
+
+ async_desc->dma_addr = dma_map_single(adev->dev, async_desc->cpl,
+ async_desc->dma_len,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(adev->dev, async_desc->dma_addr))
+ goto free;
+
+ cple_addr = async_desc->dma_addr + ((void *)cple - async_desc->cpl);
+
+ /* init cmd list */
+ dma_sync_single_for_cpu(adev->dev, cple_addr, sizeof(*cple),
+ DMA_TO_DEVICE);
+ *cple = ADM_CPLE_LP;
+ *cple |= (async_desc->dma_addr + ADM_DESC_ALIGN) >> 3;
+ dma_sync_single_for_device(adev->dev, cple_addr, sizeof(*cple),
+ DMA_TO_DEVICE);
+
+ return vchan_tx_prep(&achan->vc, &async_desc->vd, flags);
+
+free:
+ kfree(async_desc);
+ return ERR_PTR(-ENOMEM);
+}
+
+/**
+ * adm_terminate_all - terminate all transactions on a channel
+ * @achan: adm dma channel
+ *
+ * Dequeues and frees all transactions, aborts current transaction
+ * No callbacks are done
+ *
+ */
+static int adm_terminate_all(struct dma_chan *chan)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ struct adm_device *adev = achan->adev;
+ unsigned long flags;
+ LIST_HEAD(head);
+
+ spin_lock_irqsave(&achan->vc.lock, flags);
+ vchan_get_all_descriptors(&achan->vc, &head);
+
+ /* send flush command to terminate current transaction */
+ writel_relaxed(0x0,
+ adev->regs + ADM_CH_FLUSH_STATE0(achan->id, adev->ee));
+
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
+
+ vchan_dma_desc_free_list(&achan->vc, &head);
+
+ return 0;
+}
+
+static int adm_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ unsigned long flag;
+
+ spin_lock_irqsave(&achan->vc.lock, flag);
+ memcpy(&achan->slave, cfg, sizeof(struct dma_slave_config));
+ spin_unlock_irqrestore(&achan->vc.lock, flag);
+
+ return 0;
+}
+
+/**
+ * adm_start_dma - start next transaction
+ * @achan - ADM dma channel
+ */
+static void adm_start_dma(struct adm_chan *achan)
+{
+ struct virt_dma_desc *vd = vchan_next_desc(&achan->vc);
+ struct adm_device *adev = achan->adev;
+ struct adm_async_desc *async_desc;
+
+ lockdep_assert_held(&achan->vc.lock);
+
+ if (!vd)
+ return;
+
+ list_del(&vd->node);
+
+ /* write next command list out to the CMD FIFO */
+ async_desc = container_of(vd, struct adm_async_desc, vd);
+ achan->curr_txd = async_desc;
+
+ /* reset channel error */
+ achan->error = 0;
+
+ if (!achan->initialized) {
+ /* enable interrupts */
+ writel(ADM_CH_CONF_SHADOW_EN |
+ ADM_CH_CONF_PERM_MPU_CONF |
+ ADM_CH_CONF_MPU_DISABLE |
+ ADM_CH_CONF_SEC_DOMAIN(adev->ee),
+ adev->regs + ADM_CH_CONF(achan->id));
+
+ writel(ADM_CH_RSLT_CONF_IRQ_EN | ADM_CH_RSLT_CONF_FLUSH_EN,
+ adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
+
+ achan->initialized = 1;
+ }
+
+ /* set the crci block size if this transaction requires CRCI */
+ if (async_desc->crci) {
+ writel(async_desc->mux | async_desc->blk_size,
+ adev->regs + ADM_CRCI_CTL(async_desc->crci, adev->ee));
+ }
+
+ /* make sure IRQ enable doesn't get reordered */
+ wmb();
+
+ /* write next command list out to the CMD FIFO */
+ writel(ALIGN(async_desc->dma_addr, ADM_DESC_ALIGN) >> 3,
+ adev->regs + ADM_CH_CMD_PTR(achan->id, adev->ee));
+}
+
+/**
+ * adm_dma_irq - irq handler for ADM controller
+ * @irq: IRQ of interrupt
+ * @data: callback data
+ *
+ * IRQ handler for the bam controller
+ */
+static irqreturn_t adm_dma_irq(int irq, void *data)
+{
+ struct adm_device *adev = data;
+ u32 srcs, i;
+ struct adm_async_desc *async_desc;
+ unsigned long flags;
+
+ srcs = readl_relaxed(adev->regs +
+ ADM_SEC_DOMAIN_IRQ_STATUS(adev->ee));
+
+ for (i = 0; i < ADM_MAX_CHANNELS; i++) {
+ struct adm_chan *achan = &adev->channels[i];
+ u32 status, result;
+
+ if (srcs & BIT(i)) {
+ status = readl_relaxed(adev->regs +
+ ADM_CH_STATUS_SD(i, adev->ee));
+
+ /* if no result present, skip */
+ if (!(status & ADM_CH_STATUS_VALID))
+ continue;
+
+ result = readl_relaxed(adev->regs +
+ ADM_CH_RSLT(i, adev->ee));
+
+ /* no valid results, skip */
+ if (!(result & ADM_CH_RSLT_VALID))
+ continue;
+
+ /* flag error if transaction was flushed or failed */
+ if (result & (ADM_CH_RSLT_ERR | ADM_CH_RSLT_FLUSH))
+ achan->error = 1;
+
+ spin_lock_irqsave(&achan->vc.lock, flags);
+ async_desc = achan->curr_txd;
+
+ achan->curr_txd = NULL;
+
+ if (async_desc) {
+ vchan_cookie_complete(&async_desc->vd);
+
+ /* kick off next DMA */
+ adm_start_dma(achan);
+ }
+
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * adm_tx_status - returns status of transaction
+ * @chan: dma channel
+ * @cookie: transaction cookie
+ * @txstate: DMA transaction state
+ *
+ * Return status of dma transaction
+ */
+static enum dma_status adm_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
+ struct dma_tx_state *txstate)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ struct virt_dma_desc *vd;
+ enum dma_status ret;
+ unsigned long flags;
+ size_t residue = 0;
+
+ ret = dma_cookie_status(chan, cookie, txstate);
+ if (ret == DMA_COMPLETE || !txstate)
+ return ret;
+
+ spin_lock_irqsave(&achan->vc.lock, flags);
+
+ vd = vchan_find_desc(&achan->vc, cookie);
+ if (vd)
+ residue = container_of(vd, struct adm_async_desc, vd)->length;
+
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
+
+ /*
+ * residue is either the full length if it is in the issued list, or 0
+ * if it is in progress. We have no reliable way of determining
+ * anything inbetween
+ */
+ dma_set_residue(txstate, residue);
+
+ if (achan->error)
+ return DMA_ERROR;
+
+ return ret;
+}
+
+/**
+ * adm_issue_pending - starts pending transactions
+ * @chan: dma channel
+ *
+ * Issues all pending transactions and starts DMA
+ */
+static void adm_issue_pending(struct dma_chan *chan)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ unsigned long flags;
+
+ spin_lock_irqsave(&achan->vc.lock, flags);
+
+ if (vchan_issue_pending(&achan->vc) && !achan->curr_txd)
+ adm_start_dma(achan);
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
+}
+
+/**
+ * adm_dma_free_desc - free descriptor memory
+ * @vd: virtual descriptor
+ *
+ */
+static void adm_dma_free_desc(struct virt_dma_desc *vd)
+{
+ struct adm_async_desc *async_desc = container_of(vd,
+ struct adm_async_desc, vd);
+
+ dma_unmap_single(async_desc->adev->dev, async_desc->dma_addr,
+ async_desc->dma_len, DMA_TO_DEVICE);
+ kfree(async_desc->cpl);
+ kfree(async_desc);
+}
+
+static void adm_channel_init(struct adm_device *adev, struct adm_chan *achan,
+ u32 index)
+{
+ achan->id = index;
+ achan->adev = adev;
+
+ vchan_init(&achan->vc, &adev->common);
+ achan->vc.desc_free = adm_dma_free_desc;
+}
+
+static int adm_dma_probe(struct platform_device *pdev)
+{
+ struct adm_device *adev;
+ struct resource *iores;
+ int ret;
+ u32 i;
+
+ adev = devm_kzalloc(&pdev->dev, sizeof(*adev), GFP_KERNEL);
+ if (!adev)
+ return -ENOMEM;
+
+ adev->dev = &pdev->dev;
+
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ adev->regs = devm_ioremap_resource(&pdev->dev, iores);
+ if (IS_ERR(adev->regs))
+ return PTR_ERR(adev->regs);
+
+ adev->irq = platform_get_irq(pdev, 0);
+ if (adev->irq < 0)
+ return adev->irq;
+
+ ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &adev->ee);
+ if (ret) {
+ dev_err(adev->dev, "Execution environment unspecified\n");
+ return ret;
+ }
+
+ adev->core_clk = devm_clk_get(adev->dev, "core");
+ if (IS_ERR(adev->core_clk))
+ return PTR_ERR(adev->core_clk);
+
+ ret = clk_prepare_enable(adev->core_clk);
+ if (ret) {
+ dev_err(adev->dev, "failed to prepare/enable core clock\n");
+ return ret;
+ }
+
+ adev->iface_clk = devm_clk_get(adev->dev, "iface");
+ if (IS_ERR(adev->iface_clk)) {
+ ret = PTR_ERR(adev->iface_clk);
+ goto err_disable_core_clk;
+ }
+
+ ret = clk_prepare_enable(adev->iface_clk);
+ if (ret) {
+ dev_err(adev->dev, "failed to prepare/enable iface clock\n");
+ goto err_disable_core_clk;
+ }
+
+ adev->clk_reset = devm_reset_control_get(&pdev->dev, "clk");
+ if (IS_ERR(adev->clk_reset)) {
+ dev_err(adev->dev, "failed to get ADM0 reset\n");
+ ret = PTR_ERR(adev->clk_reset);
+ goto err_disable_clks;
+ }
+
+ adev->c0_reset = devm_reset_control_get(&pdev->dev, "c0");
+ if (IS_ERR(adev->c0_reset)) {
+ dev_err(adev->dev, "failed to get ADM0 C0 reset\n");
+ ret = PTR_ERR(adev->c0_reset);
+ goto err_disable_clks;
+ }
+
+ adev->c1_reset = devm_reset_control_get(&pdev->dev, "c1");
+ if (IS_ERR(adev->c1_reset)) {
+ dev_err(adev->dev, "failed to get ADM0 C1 reset\n");
+ ret = PTR_ERR(adev->c1_reset);
+ goto err_disable_clks;
+ }
+
+ adev->c2_reset = devm_reset_control_get(&pdev->dev, "c2");
+ if (IS_ERR(adev->c2_reset)) {
+ dev_err(adev->dev, "failed to get ADM0 C2 reset\n");
+ ret = PTR_ERR(adev->c2_reset);
+ goto err_disable_clks;
+ }
+
+ reset_control_assert(adev->clk_reset);
+ reset_control_assert(adev->c0_reset);
+ reset_control_assert(adev->c1_reset);
+ reset_control_assert(adev->c2_reset);
+
+ reset_control_deassert(adev->clk_reset);
+ reset_control_deassert(adev->c0_reset);
+ reset_control_deassert(adev->c1_reset);
+ reset_control_deassert(adev->c2_reset);
+
+ adev->channels = devm_kcalloc(adev->dev, ADM_MAX_CHANNELS,
+ sizeof(*adev->channels), GFP_KERNEL);
+
+ if (!adev->channels) {
+ ret = -ENOMEM;
+ goto err_disable_clks;
+ }
+
+ /* allocate and initialize channels */
+ INIT_LIST_HEAD(&adev->common.channels);
+
+ for (i = 0; i < ADM_MAX_CHANNELS; i++)
+ adm_channel_init(adev, &adev->channels[i], i);
+
+ /* reset CRCIs */
+ for (i = 0; i < 16; i++)
+ writel(ADM_CRCI_CTL_RST, adev->regs +
+ ADM_CRCI_CTL(i, adev->ee));
+
+ /* configure client interfaces */
+ writel(ADM_CI_RANGE_START(0x40) | ADM_CI_RANGE_END(0xb0) |
+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(0));
+ writel(ADM_CI_RANGE_START(0x2a) | ADM_CI_RANGE_END(0x2c) |
+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(1));
+ writel(ADM_CI_RANGE_START(0x12) | ADM_CI_RANGE_END(0x28) |
+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(2));
+ writel(ADM_GP_CTL_LP_EN | ADM_GP_CTL_LP_CNT(0xf),
+ adev->regs + ADM_GP_CTL);
+
+ ret = devm_request_irq(adev->dev, adev->irq, adm_dma_irq,
+ 0, "adm_dma", adev);
+ if (ret)
+ goto err_disable_clks;
+
+ platform_set_drvdata(pdev, adev);
+
+ adev->common.dev = adev->dev;
+ adev->common.dev->dma_parms = &adev->dma_parms;
+
+ /* set capabilities */
+ dma_cap_zero(adev->common.cap_mask);
+ dma_cap_set(DMA_SLAVE, adev->common.cap_mask);
+ dma_cap_set(DMA_PRIVATE, adev->common.cap_mask);
+
+ /* initialize dmaengine apis */
+ adev->common.directions = BIT(DMA_DEV_TO_MEM | DMA_MEM_TO_DEV);
+ adev->common.residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
+ adev->common.src_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ adev->common.dst_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ adev->common.device_free_chan_resources = adm_free_chan;
+ adev->common.device_prep_slave_sg = adm_prep_slave_sg;
+ adev->common.device_issue_pending = adm_issue_pending;
+ adev->common.device_tx_status = adm_tx_status;
+ adev->common.device_terminate_all = adm_terminate_all;
+ adev->common.device_config = adm_slave_config;
+
+ ret = dma_async_device_register(&adev->common);
+ if (ret) {
+ dev_err(adev->dev, "failed to register dma async device\n");
+ goto err_disable_clks;
+ }
+
+ ret = of_dma_controller_register(pdev->dev.of_node,
+ of_dma_xlate_by_chan_id,
+ &adev->common);
+ if (ret)
+ goto err_unregister_dma;
+
+ return 0;
+
+err_unregister_dma:
+ dma_async_device_unregister(&adev->common);
+err_disable_clks:
+ clk_disable_unprepare(adev->iface_clk);
+err_disable_core_clk:
+ clk_disable_unprepare(adev->core_clk);
+
+ return ret;
+}
+
+static int adm_dma_remove(struct platform_device *pdev)
+{
+ struct adm_device *adev = platform_get_drvdata(pdev);
+ struct adm_chan *achan;
+ u32 i;
+
+ of_dma_controller_free(pdev->dev.of_node);
+ dma_async_device_unregister(&adev->common);
+
+ for (i = 0; i < ADM_MAX_CHANNELS; i++) {
+ achan = &adev->channels[i];
+
+ /* mask IRQs for this channel/EE pair */
+ writel(0, adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
+
+ adm_terminate_all(&adev->channels[i].vc.chan);
+ }
+
+ devm_free_irq(adev->dev, adev->irq, adev);
+
+ clk_disable_unprepare(adev->core_clk);
+ clk_disable_unprepare(adev->iface_clk);
+
+ return 0;
+}
+
+static const struct of_device_id adm_of_match[] = {
+ { .compatible = "qcom,adm", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, adm_of_match);
+
+static struct platform_driver adm_dma_driver = {
+ .probe = adm_dma_probe,
+ .remove = adm_dma_remove,
+ .driver = {
+ .name = "adm-dma-engine",
+ .of_match_table = adm_of_match,
+ },
+};
+
+module_platform_driver(adm_dma_driver);
+
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
+MODULE_DESCRIPTION("QCOM ADM DMA engine driver");
+MODULE_LICENSE("GPL v2");

40
target/linux/ipq806x/patches-4.14/0030-clk-Disable-i2c-device-on-gsbi4.patch
View File

@ -1,40 +0,0 @@
From 0c974b87829e007dc4fae94e20d488204e20e662 Mon Sep 17 00:00:00 2001
From: John Crispin <john@phrozen.org>
Date: Thu, 9 Mar 2017 08:16:10 +0100
Subject: [PATCH 30/69] clk: Disable i2c device on gsbi4
This patch was not annotated and comes from the v4.4 tree.
Signed-off-by: John Crispin <john@phrozen.org>
---
drivers/clk/qcom/gcc-ipq806x.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -294,7 +294,7 @@ static struct clk_rcg gsbi1_uart_src = {
.parent_names = gcc_pxo_pll8,
.num_parents = 2,
.ops = &clk_rcg_ops,
- .flags = CLK_SET_PARENT_GATE,
+ .flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED,
},
},
};
@@ -312,7 +312,7 @@ static struct clk_branch gsbi1_uart_clk
},
.num_parents = 1,
.ops = &clk_branch_ops,
- .flags = CLK_SET_RATE_PARENT,
+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
},
},
};
@@ -890,6 +890,7 @@ static struct clk_branch gsbi1_h_clk = {
.hw.init = &(struct clk_init_data){
.name = "gsbi1_h_clk",
.ops = &clk_branch_ops,
+ .flags = CLK_IGNORE_UNUSED,
},
},
};

282
target/linux/ipq806x/patches-4.14/0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch
View File

@ -1,282 +0,0 @@
From d8eeb4de90e968ba32d956728c866f20752cf2c3 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Thu, 9 Mar 2017 08:18:08 +0100
Subject: [PATCH 31/69] mtd: add SMEM parser for QCOM platforms
On QCOM platforms using MTD devices storage (such as IPQ806x), SMEM is
used to store partition layout. This new parser can now be used to read
SMEM and use it to register an MTD layout according to its content.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
---
drivers/mtd/Kconfig | 7 ++
drivers/mtd/Makefile | 1 +
drivers/mtd/qcom_smem_part.c | 228 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 236 insertions(+)
create mode 100644 drivers/mtd/qcom_smem_part.c
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -194,6 +194,13 @@ config MTD_MYLOADER_PARTS
You will still need the parsing functions to be called by the driver
for your particular device. It won't happen automatically.
+config MTD_QCOM_SMEM_PARTS
+ tristate "QCOM SMEM partitioning support"
+ depends on QCOM_SMEM
+ help
+ This provides partitions parser for QCOM devices using SMEM
+ such as IPQ806x.
+
comment "User Modules And Translation Layers"
#
--- /dev/null
+++ b/drivers/mtd/qcom_smem_part.c
@@ -0,0 +1,235 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/module.h>
+
+#include <linux/soc/qcom/smem.h>
+
+/* Processor/host identifier for the application processor */
+#define SMEM_HOST_APPS 0
+
+/* SMEM items index */
+#define SMEM_AARM_PARTITION_TABLE 9
+#define SMEM_BOOT_FLASH_TYPE 421
+#define SMEM_BOOT_FLASH_BLOCK_SIZE 424
+
+/* SMEM Flash types */
+#define SMEM_FLASH_NAND 2
+#define SMEM_FLASH_SPI 6
+
+#define SMEM_PART_NAME_SZ 16
+#define SMEM_PARTS_MAX 32
+
+struct smem_partition {
+ char name[SMEM_PART_NAME_SZ];
+ __le32 start;
+ __le32 size;
+ __le32 attr;
+};
+
+struct smem_partition_table {
+ u8 magic[8];
+ __le32 version;
+ __le32 len;
+ struct smem_partition parts[SMEM_PARTS_MAX];
+};
+
+/* SMEM Magic values in partition table */
+static const u8 SMEM_PTABLE_MAGIC[] = {
+ 0xaa, 0x73, 0xee, 0x55,
+ 0xdb, 0xbd, 0x5e, 0xe3,
+};
+
+static int qcom_smem_get_flash_blksz(u64 **smem_blksz)
+{
+ size_t size;
+
+ *smem_blksz = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_BLOCK_SIZE,
+ &size);
+
+ if (IS_ERR(*smem_blksz)) {
+ pr_err("Unable to read flash blksz from SMEM\n");
+ return -ENOENT;
+ }
+
+ if (size != sizeof(**smem_blksz)) {
+ pr_err("Invalid flash blksz size in SMEM\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int qcom_smem_get_flash_type(u64 **smem_flash_type)
+{
+ size_t size;
+
+ *smem_flash_type = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_TYPE,
+ &size);
+
+ if (IS_ERR(*smem_flash_type)) {
+ pr_err("Unable to read flash type from SMEM\n");
+ return -ENOENT;
+ }
+
+ if (size != sizeof(**smem_flash_type)) {
+ pr_err("Invalid flash type size in SMEM\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int qcom_smem_get_flash_partitions(struct smem_partition_table **pparts)
+{
+ size_t size;
+
+ *pparts = qcom_smem_get(SMEM_HOST_APPS, SMEM_AARM_PARTITION_TABLE,
+ &size);
+
+ if (IS_ERR(*pparts)) {
+ pr_err("Unable to read partition table from SMEM\n");
+ return -ENOENT;
+ }
+
+ return 0;
+}
+
+static int of_dev_node_match(struct device *dev, void *data)
+{
+ return dev->of_node == data;
+}
+
+static bool is_spi_device(struct device_node *np)
+{
+ struct device *dev;
+
+ dev = bus_find_device(&spi_bus_type, NULL, np, of_dev_node_match);
+ if (!dev)
+ return false;
+
+ put_device(dev);
+ return true;
+}
+
+static int parse_qcom_smem_partitions(struct mtd_info *master,
+ const struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+{
+ struct smem_partition_table *smem_parts;
+ u64 *smem_flash_type, *smem_blksz;
+ struct mtd_partition *mtd_parts;
+ struct device_node *of_node = master->dev.of_node;
+ int i, ret;
+
+ /*
+ * SMEM will only store the partition table of the boot device.
+ * If this is not the boot device, do not return any partition.
+ */
+ ret = qcom_smem_get_flash_type(&smem_flash_type);
+ if (ret < 0)
+ return ret;
+
+ if ((*smem_flash_type == SMEM_FLASH_NAND && !mtd_type_is_nand(master))
+ || (*smem_flash_type == SMEM_FLASH_SPI && !is_spi_device(of_node)))
+ return 0;
+
+ /*
+ * Just for sanity purpose, make sure the block size in SMEM matches the
+ * block size of the MTD device
+ */
+ ret = qcom_smem_get_flash_blksz(&smem_blksz);
+ if (ret < 0)
+ return ret;
+
+ if (*smem_blksz != master->erasesize) {
+ pr_err("SMEM block size differs from MTD block size\n");
+ return -EINVAL;
+ }
+
+ /* Get partition pointer from SMEM */
+ ret = qcom_smem_get_flash_partitions(&smem_parts);
+ if (ret < 0)
+ return ret;
+
+ if (memcmp(SMEM_PTABLE_MAGIC, smem_parts->magic,
+ sizeof(SMEM_PTABLE_MAGIC))) {
+ pr_err("SMEM partition magic invalid\n");
+ return -EINVAL;
+ }
+
+ /* Allocate and populate the mtd structures */
+ mtd_parts = kcalloc(le32_to_cpu(smem_parts->len), sizeof(*mtd_parts),
+ GFP_KERNEL);
+ if (!mtd_parts)
+ return -ENOMEM;
+
+ for (i = 0; i < smem_parts->len; i++) {
+ struct smem_partition *s_part = &smem_parts->parts[i];
+ struct mtd_partition *m_part = &mtd_parts[i];
+
+ m_part->name = s_part->name;
+ m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz);
+ m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz);
+
+ /*
+ * The last SMEM partition may have its size marked as
+ * something like 0xffffffff, which means "until the end of the
+ * flash device". In this case, truncate it.
+ */
+ if (m_part->offset + m_part->size > master->size)
+ m_part->size = master->size - m_part->offset;
+ }
+
+ *pparts = mtd_parts;
+
+ return smem_parts->len;
+}
+
+static const struct of_device_id qcom_smem_of_match_table[] = {
+ { .compatible = "qcom,smem" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, qcom_smem_of_match_table);
+
+static struct mtd_part_parser qcom_smem_parser = {
+ .owner = THIS_MODULE,
+ .parse_fn = parse_qcom_smem_partitions,
+ .name = "qcom-smem",
+ .of_match_table = qcom_smem_of_match_table,
+};
+
+static int __init qcom_smem_parser_init(void)
+{
+ register_mtd_parser(&qcom_smem_parser);
+ return 0;
+}
+
+static void __exit qcom_smem_parser_exit(void)
+{
+ deregister_mtd_parser(&qcom_smem_parser);
+}
+
+module_init(qcom_smem_parser_init);
+module_exit(qcom_smem_parser_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mathieu Olivari <mathieu@codeaurora.org>");
+MODULE_DESCRIPTION("Parsing code for SMEM based partition tables");
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+obj-$(CONFIG_MTD_QCOM_SMEM_PARTS) += qcom_smem_part.o
obj-y += parsers/
# 'Users' - code which presents functionality to userspace.

616
target/linux/ipq806x/patches-4.14/0032-phy-add-qcom-dwc3-phy.patch
View File

@ -1,616 +0,0 @@
From b9004f4fd23e4c614d71c972f3a9311665480e29 Mon Sep 17 00:00:00 2001
From: Andy Gross <agross@codeaurora.org>
Date: Thu, 9 Mar 2017 08:19:18 +0100
Subject: [PATCH 32/69] phy: add qcom dwc3 phy
Signed-off-by: Andy Gross <agross@codeaurora.org>
---
drivers/phy/Kconfig | 12 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-qcom-dwc3.c | 575 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 588 insertions(+)
create mode 100644 drivers/phy/phy-qcom-dwc3.c
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
@@ -56,3 +56,15 @@ config PHY_QCOM_USB_HSIC
select GENERIC_PHY
help
Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
+
+config PHY_QCOM_DWC3
+ tristate "QCOM DWC3 USB PHY support"
+ depends on ARCH_QCOM
+ depends on HAS_IOMEM
+ depends on OF
+ select GENERIC_PHY
+ help
+ This option enables support for the Synopsis PHYs present inside the
+ Qualcomm USB3.0 DWC3 controller. This driver supports both HS and SS
+ PHY controllers.
+
--- a/drivers/phy/qualcomm/Makefile
+++ b/drivers/phy/qualcomm/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o
obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o
+obj-$(CONFIG_PHY_QCOM_DWC3) += phy-qcom-dwc3.o
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-dwc3.c
@@ -0,0 +1,575 @@
+/* Copyright (c) 2014-2015, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*/
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+/**
+ * USB QSCRATCH Hardware registers
+ */
+#define QSCRATCH_GENERAL_CFG (0x08)
+#define HSUSB_PHY_CTRL_REG (0x10)
+
+/* PHY_CTRL_REG */
+#define HSUSB_CTRL_DMSEHV_CLAMP BIT(24)
+#define HSUSB_CTRL_USB2_SUSPEND BIT(23)
+#define HSUSB_CTRL_UTMI_CLK_EN BIT(21)
+#define HSUSB_CTRL_UTMI_OTG_VBUS_VALID BIT(20)
+#define HSUSB_CTRL_USE_CLKCORE BIT(18)
+#define HSUSB_CTRL_DPSEHV_CLAMP BIT(17)
+#define HSUSB_CTRL_COMMONONN BIT(11)
+#define HSUSB_CTRL_ID_HV_CLAMP BIT(9)
+#define HSUSB_CTRL_OTGSESSVLD_CLAMP BIT(8)
+#define HSUSB_CTRL_CLAMP_EN BIT(7)
+#define HSUSB_CTRL_RETENABLEN BIT(1)
+#define HSUSB_CTRL_POR BIT(0)
+
+/* QSCRATCH_GENERAL_CFG */
+#define HSUSB_GCFG_XHCI_REV BIT(2)
+
+/**
+ * USB QSCRATCH Hardware registers
+ */
+#define SSUSB_PHY_CTRL_REG (0x00)
+#define SSUSB_PHY_PARAM_CTRL_1 (0x04)
+#define SSUSB_PHY_PARAM_CTRL_2 (0x08)
+#define CR_PROTOCOL_DATA_IN_REG (0x0c)
+#define CR_PROTOCOL_DATA_OUT_REG (0x10)
+#define CR_PROTOCOL_CAP_ADDR_REG (0x14)
+#define CR_PROTOCOL_CAP_DATA_REG (0x18)
+#define CR_PROTOCOL_READ_REG (0x1c)
+#define CR_PROTOCOL_WRITE_REG (0x20)
+
+/* PHY_CTRL_REG */
+#define SSUSB_CTRL_REF_USE_PAD BIT(28)
+#define SSUSB_CTRL_TEST_POWERDOWN BIT(27)
+#define SSUSB_CTRL_LANE0_PWR_PRESENT BIT(24)
+#define SSUSB_CTRL_SS_PHY_EN BIT(8)
+#define SSUSB_CTRL_SS_PHY_RESET BIT(7)
+
+/* SSPHY control registers */
+#define SSPHY_CTRL_RX_OVRD_IN_HI(lane) (0x1006 + 0x100 * lane)
+#define SSPHY_CTRL_TX_OVRD_DRV_LO(lane) (0x1002 + 0x100 * lane)
+
+/* SSPHY SoC version specific values */
+#define SSPHY_RX_EQ_VALUE 4 /* Override value for rx_eq */
+#define SSPHY_TX_DEEMPH_3_5DB 23 /* Override value for transmit
+ preemphasis */
+#define SSPHY_MPLL_VALUE 0 /* Override value for mpll */
+
+/* QSCRATCH PHY_PARAM_CTRL1 fields */
+#define PHY_PARAM_CTRL1_TX_FULL_SWING_MASK 0x07f00000u
+#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK 0x000fc000u
+#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK 0x00003f00u
+#define PHY_PARAM_CTRL1_LOS_BIAS_MASK 0x000000f8u
+
+#define PHY_PARAM_CTRL1_MASK \
+ (PHY_PARAM_CTRL1_TX_FULL_SWING_MASK | \
+ PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK | \
+ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK | \
+ PHY_PARAM_CTRL1_LOS_BIAS_MASK)
+
+#define PHY_PARAM_CTRL1_TX_FULL_SWING(x) \
+ (((x) << 20) & PHY_PARAM_CTRL1_TX_FULL_SWING_MASK)
+#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB(x) \
+ (((x) << 14) & PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK)
+#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(x) \
+ (((x) << 8) & PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK)
+#define PHY_PARAM_CTRL1_LOS_BIAS(x) \
+ (((x) << 3) & PHY_PARAM_CTRL1_LOS_BIAS_MASK)
+
+/* RX OVRD IN HI bits */
+#define RX_OVRD_IN_HI_RX_RESET_OVRD BIT(13)
+#define RX_OVRD_IN_HI_RX_RX_RESET BIT(12)
+#define RX_OVRD_IN_HI_RX_EQ_OVRD BIT(11)
+#define RX_OVRD_IN_HI_RX_EQ_MASK 0x0700
+#define RX_OVRD_IN_HI_RX_EQ_SHIFT 8
+#define RX_OVRD_IN_HI_RX_EQ_EN_OVRD BIT(7)
+#define RX_OVRD_IN_HI_RX_EQ_EN BIT(6)
+#define RX_OVRD_IN_HI_RX_LOS_FILTER_OVRD BIT(5)
+#define RX_OVRD_IN_HI_RX_LOS_FILTER_MASK 0x0018
+#define RX_OVRD_IN_HI_RX_RATE_OVRD BIT(2)
+#define RX_OVRD_IN_HI_RX_RATE_MASK 0x0003
+
+/* TX OVRD DRV LO register bits */
+#define TX_OVRD_DRV_LO_AMPLITUDE_MASK 0x007F
+#define TX_OVRD_DRV_LO_PREEMPH_MASK 0x3F80
+#define TX_OVRD_DRV_LO_PREEMPH_SHIFT 7
+#define TX_OVRD_DRV_LO_EN BIT(14)
+
+/* SS CAP register bits */
+#define SS_CR_CAP_ADDR_REG BIT(0)
+#define SS_CR_CAP_DATA_REG BIT(0)
+#define SS_CR_READ_REG BIT(0)
+#define SS_CR_WRITE_REG BIT(0)
+
+struct qcom_dwc3_usb_phy {
+ void __iomem *base;
+ struct device *dev;
+ struct clk *xo_clk;
+ struct clk *ref_clk;
+ u32 rx_eq;
+ u32 tx_deamp_3_5db;
+ u32 mpll;
+};
+
+struct qcom_dwc3_phy_drvdata {
+ struct phy_ops ops;
+ u32 clk_rate;
+};
+
+/**
+ * Write register and read back masked value to confirm it is written
+ *
+ * @base - QCOM DWC3 PHY base virtual address.
+ * @offset - register offset.
+ * @mask - register bitmask specifying what should be updated
+ * @val - value to write.
+ */
+static inline void qcom_dwc3_phy_write_readback(
+ struct qcom_dwc3_usb_phy *phy_dwc3, u32 offset,
+ const u32 mask, u32 val)
+{
+ u32 write_val, tmp = readl(phy_dwc3->base + offset);
+
+ tmp &= ~mask; /* retain other bits */
+ write_val = tmp | val;
+
+ writel(write_val, phy_dwc3->base + offset);
+
+ /* Read back to see if val was written */
+ tmp = readl(phy_dwc3->base + offset);
+ tmp &= mask; /* clear other bits */
+
+ if (tmp != val)
+ dev_err(phy_dwc3->dev, "write: %x to QSCRATCH: %x FAILED\n",
+ val, offset);
+}
+
+static int wait_for_latch(void __iomem *addr)
+{
+ u32 retry = 10;
+
+ while (true) {
+ if (!readl(addr))
+ break;
+
+ if (--retry == 0)
+ return -ETIMEDOUT;
+
+ usleep_range(10, 20);
+ }
+
+ return 0;
+}
+
+/**
+ * Write SSPHY register
+ *
+ * @base - QCOM DWC3 PHY base virtual address.
+ * @addr - SSPHY address to write.
+ * @val - value to write.
+ */
+static int qcom_dwc3_ss_write_phycreg(struct qcom_dwc3_usb_phy *phy_dwc3,
+ u32 addr, u32 val)
+{
+ int ret;
+
+ writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
+ writel(SS_CR_CAP_ADDR_REG, phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
+
+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
+ if (ret)
+ goto err_wait;
+
+ writel(val, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
+ writel(SS_CR_CAP_DATA_REG, phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
+
+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
+ if (ret)
+ goto err_wait;
+
+ writel(SS_CR_WRITE_REG, phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
+
+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
+
+err_wait:
+ if (ret)
+ dev_err(phy_dwc3->dev, "timeout waiting for latch\n");
+ return ret;
+}
+
+/**
+ * Read SSPHY register.
+ *
+ * @base - QCOM DWC3 PHY base virtual address.
+ * @addr - SSPHY address to read.
+ */
+static int qcom_dwc3_ss_read_phycreg(void __iomem *base, u32 addr, u32 *val)
+{
+ int ret;
+
+ writel(addr, base + CR_PROTOCOL_DATA_IN_REG);
+ writel(SS_CR_CAP_ADDR_REG, base + CR_PROTOCOL_CAP_ADDR_REG);
+
+ ret = wait_for_latch(base + CR_PROTOCOL_CAP_ADDR_REG);
+ if (ret)
+ goto err_wait;
+
+ /*
+ * Due to hardware bug, first read of SSPHY register might be
+ * incorrect. Hence as workaround, SW should perform SSPHY register
+ * read twice, but use only second read and ignore first read.
+ */
+ writel(SS_CR_READ_REG, base + CR_PROTOCOL_READ_REG);
+
+ ret = wait_for_latch(base + CR_PROTOCOL_READ_REG);
+ if (ret)
+ goto err_wait;
+
+ /* throwaway read */
+ readl(base + CR_PROTOCOL_DATA_OUT_REG);
+
+ writel(SS_CR_READ_REG, base + CR_PROTOCOL_READ_REG);
+
+ ret = wait_for_latch(base + CR_PROTOCOL_READ_REG);
+ if (ret)
+ goto err_wait;
+
+ *val = readl(base + CR_PROTOCOL_DATA_OUT_REG);
+
+err_wait:
+ return ret;
+}
+
+static int qcom_dwc3_hs_phy_init(struct phy *phy)
+{
+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
+ int ret;
+ u32 val;
+
+ ret = clk_prepare_enable(phy_dwc3->xo_clk);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(phy_dwc3->ref_clk);
+ if (ret) {
+ clk_disable_unprepare(phy_dwc3->xo_clk);
+ return ret;
+ }
+
+ /*
+ * HSPHY Initialization: Enable UTMI clock, select 19.2MHz fsel
+ * enable clamping, and disable RETENTION (power-on default is ENABLED)
+ */
+ val = HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_DMSEHV_CLAMP |
+ HSUSB_CTRL_RETENABLEN | HSUSB_CTRL_COMMONONN |
+ HSUSB_CTRL_OTGSESSVLD_CLAMP | HSUSB_CTRL_ID_HV_CLAMP |
+ HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_UTMI_OTG_VBUS_VALID |
+ HSUSB_CTRL_UTMI_CLK_EN | HSUSB_CTRL_CLAMP_EN | 0x70;
+
+ /* use core clock if external reference is not present */
+ if (!phy_dwc3->xo_clk)
+ val |= HSUSB_CTRL_USE_CLKCORE;
+
+ writel(val, phy_dwc3->base + HSUSB_PHY_CTRL_REG);
+ usleep_range(2000, 2200);
+
+ /* Disable (bypass) VBUS and ID filters */
+ writel(HSUSB_GCFG_XHCI_REV, phy_dwc3->base + QSCRATCH_GENERAL_CFG);
+
+ return 0;
+}
+
+static int qcom_dwc3_hs_phy_exit(struct phy *phy)
+{
+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
+
+ clk_disable_unprepare(phy_dwc3->ref_clk);
+ clk_disable_unprepare(phy_dwc3->xo_clk);
+
+ return 0;
+}
+
+static int qcom_dwc3_ss_phy_init(struct phy *phy)
+{
+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
+ int ret;
+ u32 data = 0;
+
+ ret = clk_prepare_enable(phy_dwc3->xo_clk);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(phy_dwc3->ref_clk);
+ if (ret) {
+ clk_disable_unprepare(phy_dwc3->xo_clk);
+ return ret;
+ }
+
+ /* reset phy */
+ data = readl(phy_dwc3->base + SSUSB_PHY_CTRL_REG);
+ writel(data | SSUSB_CTRL_SS_PHY_RESET,
+ phy_dwc3->base + SSUSB_PHY_CTRL_REG);
+ usleep_range(2000, 2200);
+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
+
+ /* clear REF_PAD if we don't have XO clk */
+ if (!phy_dwc3->xo_clk)
+ data &= ~SSUSB_CTRL_REF_USE_PAD;
+ else
+ data |= SSUSB_CTRL_REF_USE_PAD;
+
+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
+
+ /* wait for ref clk to become stable, this can take up to 30ms */
+ msleep(30);
+
+ data |= SSUSB_CTRL_SS_PHY_EN | SSUSB_CTRL_LANE0_PWR_PRESENT;
+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
+
+ /*
+ * WORKAROUND: There is SSPHY suspend bug due to which USB enumerates
+ * in HS mode instead of SS mode. Workaround it by asserting
+ * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus mode
+ */
+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, 0x102D, &data);
+ if (ret)
+ goto err_phy_trans;
+
+ data |= (1 << 7);
+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x102D, data);
+ if (ret)
+ goto err_phy_trans;
+
+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, 0x1010, &data);
+ if (ret)
+ goto err_phy_trans;
+
+ data &= ~0xff0;
+ data |= 0x20;
+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x1010, data);
+ if (ret)
+ goto err_phy_trans;
+
+ /*
+ * Fix RX Equalization setting as follows
+ * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0
+ * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1
+ * LANE0.RX_OVRD_IN_HI.RX_EQ set based on SoC version
+ * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1
+ */
+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base,
+ SSPHY_CTRL_RX_OVRD_IN_HI(0), &data);
+ if (ret)
+ goto err_phy_trans;
+
+ data &= ~RX_OVRD_IN_HI_RX_EQ_EN;
+ data |= RX_OVRD_IN_HI_RX_EQ_EN_OVRD;
+ data &= ~RX_OVRD_IN_HI_RX_EQ_MASK;
+ data |= phy_dwc3->rx_eq << RX_OVRD_IN_HI_RX_EQ_SHIFT;
+ data |= RX_OVRD_IN_HI_RX_EQ_OVRD;
+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3,
+ SSPHY_CTRL_RX_OVRD_IN_HI(0), data);
+ if (ret)
+ goto err_phy_trans;
+
+ /*
+ * Set EQ and TX launch amplitudes as follows
+ * LANE0.TX_OVRD_DRV_LO.PREEMPH set based on SoC version
+ * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 110
+ * LANE0.TX_OVRD_DRV_LO.EN set to 1.
+ */
+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base,
+ SSPHY_CTRL_TX_OVRD_DRV_LO(0), &data);
+ if (ret)
+ goto err_phy_trans;
+
+ data &= ~TX_OVRD_DRV_LO_PREEMPH_MASK;
+ data |= phy_dwc3->tx_deamp_3_5db << TX_OVRD_DRV_LO_PREEMPH_SHIFT;
+ data &= ~TX_OVRD_DRV_LO_AMPLITUDE_MASK;
+ data |= 0x6E;
+ data |= TX_OVRD_DRV_LO_EN;
+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3,
+ SSPHY_CTRL_TX_OVRD_DRV_LO(0), data);
+ if (ret)
+ goto err_phy_trans;
+
+ qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x30, phy_dwc3->mpll);
+
+ /*
+ * Set the QSCRATCH PHY_PARAM_CTRL1 parameters as follows
+ * TX_FULL_SWING [26:20] amplitude to 110
+ * TX_DEEMPH_6DB [19:14] to 32
+ * TX_DEEMPH_3_5DB [13:8] set based on SoC version
+ * LOS_BIAS [7:3] to 9
+ */
+ data = readl(phy_dwc3->base + SSUSB_PHY_PARAM_CTRL_1);
+
+ data &= ~PHY_PARAM_CTRL1_MASK;
+
+ data |= PHY_PARAM_CTRL1_TX_FULL_SWING(0x6e) |
+ PHY_PARAM_CTRL1_TX_DEEMPH_6DB(0x20) |
+ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(phy_dwc3->tx_deamp_3_5db) |
+ PHY_PARAM_CTRL1_LOS_BIAS(0x9);
+
+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_PARAM_CTRL_1,
+ PHY_PARAM_CTRL1_MASK, data);
+
+err_phy_trans:
+ return ret;
+}
+
+static int qcom_dwc3_ss_phy_exit(struct phy *phy)
+{
+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
+
+ /* Sequence to put SSPHY in low power state:
+ * 1. Clear REF_PHY_EN in PHY_CTRL_REG
+ * 2. Clear REF_USE_PAD in PHY_CTRL_REG
+ * 3. Set TEST_POWERED_DOWN in PHY_CTRL_REG to enable PHY retention
+ */
+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
+ SSUSB_CTRL_SS_PHY_EN, 0x0);
+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
+ SSUSB_CTRL_REF_USE_PAD, 0x0);
+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
+ SSUSB_CTRL_TEST_POWERDOWN, 0x0);
+
+ clk_disable_unprepare(phy_dwc3->ref_clk);
+ clk_disable_unprepare(phy_dwc3->xo_clk);
+
+ return 0;
+}
+
+static const struct qcom_dwc3_phy_drvdata qcom_dwc3_hs_drvdata = {
+ .ops = {
+ .init = qcom_dwc3_hs_phy_init,
+ .exit = qcom_dwc3_hs_phy_exit,
+ .owner = THIS_MODULE,
+ },
+ .clk_rate = 60000000,
+};
+
+static const struct qcom_dwc3_phy_drvdata qcom_dwc3_ss_drvdata = {
+ .ops = {
+ .init = qcom_dwc3_ss_phy_init,
+ .exit = qcom_dwc3_ss_phy_exit,
+ .owner = THIS_MODULE,
+ },
+ .clk_rate = 125000000,
+};
+
+static const struct of_device_id qcom_dwc3_phy_table[] = {
+ { .compatible = "qcom,dwc3-hs-usb-phy", .data = &qcom_dwc3_hs_drvdata },
+ { .compatible = "qcom,dwc3-ss-usb-phy", .data = &qcom_dwc3_ss_drvdata },
+ { /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, qcom_dwc3_phy_table);
+
+static int qcom_dwc3_phy_probe(struct platform_device *pdev)
+{
+ struct qcom_dwc3_usb_phy *phy_dwc3;
+ struct phy_provider *phy_provider;
+ struct phy *generic_phy;
+ struct resource *res;
+ const struct of_device_id *match;
+ const struct qcom_dwc3_phy_drvdata *data;
+ struct device_node *np;
+
+ phy_dwc3 = devm_kzalloc(&pdev->dev, sizeof(*phy_dwc3), GFP_KERNEL);
+ if (!phy_dwc3)
+ return -ENOMEM;
+
+ match = of_match_node(qcom_dwc3_phy_table, pdev->dev.of_node);
+ data = match->data;
+
+ phy_dwc3->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ phy_dwc3->base = devm_ioremap_resource(phy_dwc3->dev, res);
+ if (IS_ERR(phy_dwc3->base))
+ return PTR_ERR(phy_dwc3->base);
+
+ phy_dwc3->ref_clk = devm_clk_get(phy_dwc3->dev, "ref");
+ if (IS_ERR(phy_dwc3->ref_clk)) {
+ dev_dbg(phy_dwc3->dev, "cannot get reference clock\n");
+ return PTR_ERR(phy_dwc3->ref_clk);
+ }
+
+ clk_set_rate(phy_dwc3->ref_clk, data->clk_rate);
+
+ phy_dwc3->xo_clk = devm_clk_get(phy_dwc3->dev, "xo");
+ if (IS_ERR(phy_dwc3->xo_clk)) {
+ dev_dbg(phy_dwc3->dev, "cannot get TCXO clock\n");
+ phy_dwc3->xo_clk = NULL;
+ }
+
+ /* Parse device node to probe HSIO settings */
+ np = of_node_get(pdev->dev.of_node);
+ if (!of_compat_cmp(match->compatible, "qcom,dwc3-ss-usb-phy",
+ strlen(match->compatible))) {
+
+ if (of_property_read_u32(np, "rx_eq", &phy_dwc3->rx_eq) ||
+ of_property_read_u32(np, "tx_deamp_3_5db",
+ &phy_dwc3->tx_deamp_3_5db) ||
+ of_property_read_u32(np, "mpll", &phy_dwc3->mpll)) {
+
+ dev_err(phy_dwc3->dev, "cannot get HSIO settings from device node, using default values\n");
+
+ /* Default HSIO settings */
+ phy_dwc3->rx_eq = SSPHY_RX_EQ_VALUE;
+ phy_dwc3->tx_deamp_3_5db = SSPHY_TX_DEEMPH_3_5DB;
+ phy_dwc3->mpll = SSPHY_MPLL_VALUE;
+ }
+ }
+
+ generic_phy = devm_phy_create(phy_dwc3->dev, pdev->dev.of_node,
+ &data->ops);
+
+ if (IS_ERR(generic_phy))
+ return PTR_ERR(generic_phy);
+
+ phy_set_drvdata(generic_phy, phy_dwc3);
+ platform_set_drvdata(pdev, phy_dwc3);
+
+ phy_provider = devm_of_phy_provider_register(phy_dwc3->dev,
+ of_phy_simple_xlate);
+
+ if (IS_ERR(phy_provider))
+ return PTR_ERR(phy_provider);
+
+ return 0;
+}
+
+static struct platform_driver qcom_dwc3_phy_driver = {
+ .probe = qcom_dwc3_phy_probe,
+ .driver = {
+ .name = "qcom-dwc3-usb-phy",
+ .owner = THIS_MODULE,
+ .of_match_table = qcom_dwc3_phy_table,
+ },
+};
+
+module_platform_driver(qcom_dwc3_phy_driver);
+
+MODULE_ALIAS("platform:phy-qcom-dwc3");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
+MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>");
+MODULE_DESCRIPTION("DesignWare USB3 QCOM PHY driver");

Some files were not shown because too many files have changed in this diff Show More