fish/immortalwrt
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

rockchip: add NanoPi R5C support

Browse Source 
Hardware
--------
RockChip RK3568 ARM64 (4 cores)
1GB or 4GB LPDDR4X RAM
2x 2500 Base-T
4 LEDs (LAN / WAN / WIFI / POWER)
1 Button (Reset)
8GB or 32GB eMMC on-board
Micro-SD Slot
M.2 Slot
2x USB 3.0 Port

Installation
------------
Uncompress the ImmortalWrt sysupgrade and write it to a micro SD card using
dd.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
This commit is contained in:
Tianling Shen 2023-02-15 16:31:04 +08:00
parent 89b364e829
commit 34b89b34a7
No known key found for this signature in database
GPG Key ID: 6850B6345C862176
6 changed files with 742 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
target/linux/rockchip/armv8/base-files/etc/board.d/01_leds
View File

@ -17,6 +17,10 @@ xunlong,orangepi-r1-plus-lts)
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth0"
ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth1"
;;
friendlyarm,nanopi-r5c)
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0"
;;
esac
board_config_flush

4
target/linux/rockchip/armv8/base-files/etc/board.d/02_network
View File

@ -15,6 +15,7 @@ rockchip_setup_interfaces()
xunlong,orangepi-r1-plus-lts)
ucidef_set_interfaces_lan_wan 'eth1' 'eth0'
;;
friendlyarm,nanopi-r5c|\
lunzn,fastrhino-r66s)
ucidef_set_interfaces_lan_wan 'eth0' 'eth1'
;;
@ -42,7 +43,8 @@ rockchip_setup_macs()
wan_mac=$(macaddr_generate_from_mmc_cid mmcblk0)
lan_mac=$(macaddr_add "$wan_mac" 1)
;;
friendlyarm,nanopi-r4s)
friendlyarm,nanopi-r4s|\
friendlyarm,nanopi-r5c)
wan_mac=$(macaddr_generate_from_mmc_cid mmcblk1)
lan_mac=$(macaddr_add "$wan_mac" 1)
;;

1
target/linux/rockchip/armv8/base-files/etc/hotplug.d/net/40-net-smp-affinity
View File

@ -41,6 +41,7 @@ friendlyarm,nanopi-r4s-enterprise)
set_interface_core 10 "eth0"
set_interface_core 20 "eth1"
;;
friendlyarm,nanopi-r5c|\
lunzn,fastrhino-r66s)
set_interface_core 2 "eth0"
set_interface_core 4 "eth1"

721
target/linux/rockchip/files/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts Normal file
View File

@ -0,0 +1,721 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
* (http://www.friendlyelec.com)
*
* Copyright (c) 2023 Tianling Shen <cnsztl@immoratlwrt.org>
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3568.dtsi"
/ {
model = "FriendlyElec NanoPi R5C";
compatible = "friendlyarm,nanopi-r5c", "rockchip,rk3568";
aliases {
ethernet0 = &rtl8125_1;
ethernet1 = &rtl8125_2;
mmc0 = &sdhci;
mmc1 = &sdmmc0;
led-boot = &power_led;
led-failsafe = &power_led;
led-running = &power_led;
led-upgrade = &power_led;
};
chosen: chosen {
stdout-path = "serial2:1500000n8";
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&reset_button_pin>;
button-reset {
debounce-interval = <50>;
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
label = "reset";
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&lan_led_pin>, <&power_led_pin>, <&wan_led_pin>, <&wifi_led_pin>;
led-lan {
label = "green:lan";
gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
};
power_led: led-power {
label = "red:power";
gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
};
led-wan {
label = "green:wan";
gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
};
led-wifi {
label = "green:wifi";
gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
};
};
hdmi-con {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
rk809-sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
simple-audio-card,name = "Analog RK809";
simple-audio-card,mclk-fs = <256>;
simple-audio-card,cpu {
sound-dai = <&i2s1_8ch>;
};
simple-audio-card,codec {
sound-dai = <&rk809>;
};
};
vdd_usbc: vdd-usbc-regulator {
compatible = "regulator-fixed";
regulator-name = "vdd_usbc";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
vcc3v3_sys: vcc3v3-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vdd_usbc>;
};
vcc5v0_sys: vcc5v0-sys {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vdd_usbc>;
};
vcc3v3_pcie: vcc3v3-pcie-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_pcie";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
startup-delay-us = <200000>;
vin-supply = <&vcc5v0_sys>;
};
vcc5v0_usb: vcc5v0-usb-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usb";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vdd_usbc>;
};
vcc5v0_usb_host: vcc5v0-usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_usb_host_en>;
regulator-name = "vcc5v0_usb_host";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_usb>;
};
vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_usb_otg_en>;
regulator-name = "vcc5v0_usb_otg";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_usb>;
};
};
&combphy0 {
status = "okay";
};
&combphy1 {
status = "okay";
};
&combphy2 {
status = "okay";
};
&cpu0 {
cpu-supply = <&vdd_cpu>;
};
&cpu1 {
cpu-supply = <&vdd_cpu>;
};
&cpu2 {
cpu-supply = <&vdd_cpu>;
};
&cpu3 {
cpu-supply = <&vdd_cpu>;
};
&gpu {
mali-supply = <&vdd_gpu>;
status = "okay";
};
&hdmi {
avdd-0v9-supply = <&vdda0v9_image>;
avdd-1v8-supply = <&vcca1v8_image>;
status = "okay";
};
&hdmi_in {
hdmi_in_vp0: endpoint {
remote-endpoint = <&vp0_out_hdmi>;
};
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&hdmi_sound {
status = "okay";
};
&i2c0 {
status = "okay";
vdd_cpu: regulator@1c {
compatible = "tcs,tcs4525";
reg = <0x1c>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1150000>;
regulator-ramp-delay = <2300>;
vin-supply = <&vcc5v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
rk809: pmic@20 {
compatible = "rockchip,rk809";
reg = <0x20>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>;
rockchip,system-power-controller;
vcc1-supply = <&vcc3v3_sys>;
vcc2-supply = <&vcc3v3_sys>;
vcc3-supply = <&vcc3v3_sys>;
vcc4-supply = <&vcc3v3_sys>;
vcc5-supply = <&vcc3v3_sys>;
vcc6-supply = <&vcc3v3_sys>;
vcc7-supply = <&vcc3v3_sys>;
vcc8-supply = <&vcc3v3_sys>;
vcc9-supply = <&vcc3v3_sys>;
wakeup-source;
regulators {
vdd_logic: DCDC_REG1 {
regulator-name = "vdd_logic";
regulator-always-on;
regulator-boot-on;
regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_gpu: DCDC_REG2 {
regulator-name = "vdd_gpu";
regulator-always-on;
regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ddr: DCDC_REG3 {
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <0x2>;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vdd_npu: DCDC_REG4 {
regulator-name = "vdd_npu";
regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8: DCDC_REG5 {
regulator-name = "vcc_1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda0v9_image: LDO_REG1 {
regulator-name = "vdda0v9_image";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <950000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda_0v9: LDO_REG2 {
regulator-name = "vdda_0v9";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda0v9_pmu: LDO_REG3 {
regulator-name = "vdda0v9_pmu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <900000>;
};
};
vccio_acodec: LDO_REG4 {
regulator-name = "vccio_acodec";
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_sd: LDO_REG5 {
regulator-name = "vccio_sd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_pmu: LDO_REG6 {
regulator-name = "vcc3v3_pmu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcca_1v8: LDO_REG7 {
regulator-name = "vcca_1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcca1v8_pmu: LDO_REG8 {
regulator-name = "vcca1v8_pmu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcca1v8_image: LDO_REG9 {
regulator-name = "vcca1v8_image";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_3v3: SWITCH_REG1 {
regulator-name = "vcc_3v3";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_sd: SWITCH_REG2 {
regulator-name = "vcc3v3_sd";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
};
&i2c5 {
status = "okay";
hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <0>;
clock-output-names = "rtcic_32kout";
pinctrl-names = "default";
pinctrl-0 = <&hym8563_int>;
wakeup-source;
};
};
&i2s0_8ch {
status = "okay";
};
&i2s1_8ch {
rockchip,trcm-sync-tx-only;
status = "okay";
};
&pcie2x1 {
pinctrl-names = "default";
pinctrl-0 = <&pcie20_reset_pin>;
reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&pcie30phy {
data-lanes = <1 2>;
status = "okay";
};
&pcie3x1 {
num-lanes = <1>;
reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie>;
status = "okay";
pcie@10 {
reg = <0x00100000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
rtl8125_1: pcie-eth@10,0 {
compatible = "pci10ec,8125";
reg = <0x000000 0 0 0 0>;
realtek,led-data = <0x78>;
};
};
};
&pcie3x2 {
num-lanes = <1>;
reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie>;
status = "okay";
pcie@20 {
reg = <0x00200000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
rtl8125_2: pcie-eth@20,0 {
compatible = "pci10ec,8125";
reg = <0x000000 0 0 0 0>;
realtek,led-data = <0x78>;
};
};
};
&pinctrl {
hym8563 {
hym8563_int: hym8563-int {
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
gpio-leds {
lan_led_pin: lan-led-pin {
rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
power_led_pin: power-led-pin {
rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
wan_led_pin: wan-led-pin {
rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
wifi_led_pin: wifi-led-pin {
rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pcie {
pcie20_reset_pin: pcie20-reset-pin {
rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
pmic {
pmic_int: pmic-int {
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
rockchip-key {
reset_button_pin: reset-button-pin {
rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
usb {
vcc5v0_usb_host_en: vcc5v0-usb-host-en {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pmu_io_domains {
pmuio1-supply = <&vcc3v3_pmu>;
pmuio2-supply = <&vcc3v3_pmu>;
vccio1-supply = <&vccio_acodec>;
vccio3-supply = <&vccio_sd>;
vccio4-supply = <&vcc_1v8>;
vccio5-supply = <&vcc_3v3>;
vccio6-supply = <&vcc_1v8>;
vccio7-supply = <&vcc_3v3>;
status = "okay";
};
&rng {
status = "okay";
};
&saradc {
vref-supply = <&vcca_1v8>;
status = "okay";
};
&sdhci {
bus-width = <8>;
max-frequency = <200000000>;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
status = "okay";
};
&sdmmc0 {
max-frequency = <150000000>;
no-sdio;
no-mmc;
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
disable-wp;
vmmc-supply = <&vcc3v3_sd>;
vqmmc-supply = <&vccio_sd>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
status = "okay";
};
&tsadc {
rockchip,hw-tshut-mode = <1>;
rockchip,hw-tshut-polarity = <0>;
status = "okay";
};
&uart2 {
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&usb_host0_xhci {
extcon = <&usb2phy0>;
dr_mode = "host";
status = "okay";
};
&usb_host1_ehci {
status = "okay";
};
&usb_host1_ohci {
status = "okay";
};
&usb_host1_xhci {
status = "okay";
};
&usb2phy0 {
status = "okay";
};
&usb2phy0_host {
phy-supply = <&vcc5v0_usb_host>;
status = "okay";
};
&usb2phy0_otg {
status = "okay";
};
&usb2phy1 {
status = "okay";
};
&usb2phy1_host {
phy-supply = <&vcc5v0_usb_otg>;
status = "okay";
};
&usb2phy1_otg {
status = "okay";
};
&vop {
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
status = "okay";
};
&vop_mmu {
status = "okay";
};
&vp0 {
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
remote-endpoint = <&hdmi_in_vp0>;
};
};

10
target/linux/rockchip/image/armv8.mk
View File

@ -39,6 +39,16 @@ define Device/friendlyarm_nanopi-r4s-enterprise
endef
TARGET_DEVICES += friendlyarm_nanopi-r4s-enterprise
define Device/friendlyarm_nanopi-r5c
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R5C
SOC := rk3568
UBOOT_DEVICE_NAME := nanopi-r5c-rk3568
IMAGE/sysupgrade.img.gz := boot-common | boot-script | pine64-img | gzip | append-metadata
DEVICE_PACKAGES := kmod-r8125
endef
TARGET_DEVICES += friendlyarm_nanopi-r5c
define Device/lunzn_fastrhino-r66s
DEVICE_VENDOR := Lunzn
DEVICE_MODEL := FastRhino R66S

6
target/linux/rockchip/patches-5.15/900-arm64-boot-add-dts-files.patch
View File

@ -11,10 +11,10 @@
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
@@ -53,4 +55,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ro
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
@@ -54,3 +56,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sa
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r68s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb