From 1d6e594aa07547c17904be7e2e92ee6a2447ba33 Mon Sep 17 00:00:00 2001
From: Russell Morris <rmorris@rkmorris.us>
Date: Thu, 29 Jul 2021 22:19:45 -0500
Subject: [PATCH 01/17] ramips: sunvalley - allow larger sysupgrade Aligned to
 size of mtd-concat partition (firmware)   - in this device we have mtd-concat
 driver that joins multiple flash partitions   - since sysupgrade works with
 mtd devices the rootfs partition is already joined   - we can use a bigger
 sysupgrade image than factory/TFTP install images Checked on hardware, no
 issues seen. No modifications to images other than sysupgrade (i.e. TFTP /
 recovery images not touched).

Signed-off-by: Russell Morris <rmorris@rkmorris.us>
---
 target/linux/ramips/image/mt7620.mk | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index 7c2ff740f0..bb06e0d6c8 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -592,6 +592,8 @@ define Device/sunvalley_filehub_common
   IMAGES += kernel.bin rootfs.bin
   IMAGE/kernel.bin := append-loader-okli $(1) | check-size 64k
   IMAGE/rootfs.bin := $$(sysupgrade_bin) | check-size
+  IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
+       check-size 7744k | append-metadata
 endef
 
 define Device/hootoo_ht-tm05

From 0bbd5699c81d6887c4d895e85b56d8c23b1211ec Mon Sep 17 00:00:00 2001
From: Kim DoHyoung <azusahmr@k-on.kr>
Date: Thu, 11 Aug 2022 08:13:35 +0000
Subject: [PATCH 02/17] ramips: mt7621: add support for Zbtlink ZBT-WG1608
 (32M)

Zbtlink ZBT-WG1608 is a Wi-Fi router intendent to use with WWAN (4G/5G)
modems.

Specifications:
* SoC: MediaTek MT7621A
* RAM: 256/512 MiB
* Flash: 16/32 MiB (SPI NOR)
* Wi-Fi:
  * MediaTek MT7603E : 2.4Ghz
  * MediaTek MT7613BE : 5Ghz
* Ethernet: 10/100/1000 Mbps Ethernet x5 ports (4xLAN + WAN)
* M.2: 1x slot with USB&SIM
  * EM7455/EM12-G/EM160R/RM500Q-AE
* USB: 1x 3.0 Type-A port
* External storage: 1x microSD (SDXC) slot
* UART: console (115200 baud)
* LED:
  * 1 power indicator
  * 1 WLAN 2.4G controlled (wlan 2G)
  * 3 SoC controlled (wlan 5G, wwan, internet)
  * 5 per Eth phy (4xLAN + WAN)

MAC Addresses:
* LAN    : f8:5e:3c:xx:xx:e0 (Factory, 0xe000 (hex))
* WAN    : f8:5e:3c:xx:xx:e1 (Factory, 0xe006 (hex))
* 2.4 GHz: f8:5e:3c:xx:xx:de (Factory, 0x0004 (hex))
* 5 GHz  : f8:5e:3c:xx:xx:df (Factory, 0x8004 (hex))

Installation:
* Vendor's firmware is OpenWrt (LEDE) based, so the sysupgrade image can
  be directly used to install OpenWrt. Firmware must be upgraded using the
  'force' and 'do not save configuration' command line options (or
  correspondig web interface checkboxes) since the vendor firmware is from
  the pre-DSA era.

Recovery Mode:
 * Press reset button, power up the device, wait for about 10sec.
 * Upload sysupgrade image through the firmware recovery mode web page at
  192.168.1.1.

Signed-off-by: Kim DoHyoung <azusahmr@k-on.kr>
---
 .../ramips/dts/mt7621_zbtlink_zbt-wg1608-32m.dts | 16 ++++++++++++++++
 .../ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi    |  2 +-
 target/linux/ramips/image/mt7621.mk              | 12 ++++++++++++
 3 files changed, 29 insertions(+), 1 deletion(-)
 create mode 100644 target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608-32m.dts

diff --git a/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608-32m.dts b/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608-32m.dts
new file mode 100644
index 0000000000..00feec2ff3
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608-32m.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621_zbtlink_zbt-wg1608.dtsi"
+
+/ {
+	compatible = "zbtlink,zbt-wg1608-32m", "mediatek,mt7621-soc";
+	model = "Zbtlink ZBT-WG1608 (32M)";
+};
+
+&flash0 {
+	broken-flash-reset;
+};
+
+&firmware {
+	reg = <0x50000 0x1fb0000>;
+};
diff --git a/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi b/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi
index 59fab90ed1..303708fab0 100644
--- a/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi
+++ b/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi
@@ -61,7 +61,7 @@
 &spi0 {
 	status = "okay";
 
-	flash@0 {
+	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <50000000>;
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index b8fa0cefdb..a5b69839a7 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -2706,6 +2706,18 @@ define Device/zbtlink_zbt-wg1608-16m
 endef
 TARGET_DEVICES += zbtlink_zbt-wg1608-16m
 
+define Device/zbtlink_zbt-wg1608-32m
+  $(Device/dsa-migration)
+  $(Device/uimage-lzma-loader)
+  IMAGE_SIZE := 32448k
+  DEVICE_VENDOR := Zbtlink
+  DEVICE_MODEL := ZBT-WG1608
+  DEVICE_VARIANT := 32M
+  DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt7603 kmod-mt7615e \
+	kmod-mt7663-firmware-ap kmod-usb3 kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += zbtlink_zbt-wg1608-32m
+
 define Device/zbtlink_zbt-wg2626
   $(Device/dsa-migration)
   $(Device/uimage-lzma-loader)

From 008cc836fe42577af2843730dfefd31b750c7de6 Mon Sep 17 00:00:00 2001
From: Joshua O'Leary <josh.oleary@mobile-power.co.uk>
Date: Wed, 7 Jun 2023 11:32:22 +0100
Subject: [PATCH 03/17] zbt-wd323: add GPIO WDT support

Watchdog has not been properly configured for this router - the PCB has a
hardware watchdog connected to one of the GPIO pin 21 [1]
This commit provides this fix [2]

Without this fix, the ZBT-WD323 is unusable in OpenWRT because it power
cycles every 30 seconds due to the watchdog tripping

[1] https://forum.openwrt.org/t/zbt-wd323-router-power-cycles-every-30-seconds/77535/7
[2] https://forum.openwrt.org/t/zbt-wd323-images-unusable-proposed-workaround/162145/5

Signed-off-by: Joshua O'Leary <josh.oleary@mobile-power.co.uk>
---
 target/linux/ath79/dts/ar9344_zbtlink_zbt-wd323.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/target/linux/ath79/dts/ar9344_zbtlink_zbt-wd323.dts b/target/linux/ath79/dts/ar9344_zbtlink_zbt-wd323.dts
index 8fc21be1dc..8dc1ceb666 100644
--- a/target/linux/ath79/dts/ar9344_zbtlink_zbt-wd323.dts
+++ b/target/linux/ath79/dts/ar9344_zbtlink_zbt-wd323.dts
@@ -59,6 +59,14 @@
 			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
 		};
 	};
+	
+	watchdog {
+		compatible = "linux,wdt-gpio";
+		gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
+		hw_algo = "toggle";
+		hw_margin_ms = <30000>;
+		always-running;
+	};
 };
 
 &wdt {

From 984786a2f7ec622c99e8c9cdada65d0ea0cf4e0b Mon Sep 17 00:00:00 2001
From: Flole Systems <flole@flole.de>
Date: Mon, 10 Apr 2023 23:36:59 +0200
Subject: [PATCH 04/17] filogic: add support for Netgear WAX220

Hardware
--------
SOC:   MediaTek MT7986
RAM:   1024MB DDR3
FLASH: 128MB SPI-NAND (Winbond)
WIFI:  Mediatek MT7986 DBDC 802.11ax 2.4/5 GHz
ETH:   Realtek RTL8221B-VB-CG 2.5 N-Base-T PHY with PoE
UART:  3V3 115200 8N1 (Pinout silkscreened / Do not connect VCC)

Installation
------------

1. Download the OpenWrt initramfs image. Copy the image to a TFTP server
2. Connect the TFTP server to the WAX220. Conect to the serial console,
   interrupt the autoboot process by pressing '0' when prompted.
3. Download & Boot the OpenWrt initramfs image.

   $ setenv ipaddr 192.168.2.1
   $ setenv serverip 192.168.2.2
   $ tftpboot openwrt.bin
   $ bootm

4. Wait for OpenWrt to boot. Transfer the sysupgrade image to the device
   using scp and install using sysupgrade.

   $ sysupgrade -n <path-to-sysupgrade.bin>

Signed-off-by: Flole Systems <flole@flole.de>
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
 .../uboot-envtools/files/mediatek_filogic     |   3 +
 .../mediatek/dts/mt7986b-netgear-wax220.dts   | 288 ++++++++++++++++++
 .../filogic/base-files/etc/board.d/01_leds    |   5 +
 .../filogic/base-files/etc/board.d/02_network |   7 +
 .../etc/hotplug.d/ieee80211/11_fix_wifi_mac   |   5 +
 target/linux/mediatek/image/filogic.mk        |  16 +
 6 files changed, 324 insertions(+)
 create mode 100644 target/linux/mediatek/dts/mt7986b-netgear-wax220.dts

diff --git a/package/boot/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-envtools/files/mediatek_filogic
index 9df64791b2..881d0c4501 100644
--- a/package/boot/uboot-envtools/files/mediatek_filogic
+++ b/package/boot/uboot-envtools/files/mediatek_filogic
@@ -40,6 +40,9 @@ bananapi,bpi-r3)
 glinet,gl-mt3000)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x20000"
 	;;
+netgear,wax220)
+	ubootenv_add_uci_config "/dev/mtd5" "0x0" "0x20000" "0x20000"
+	;;
 xiaomi,redmi-router-ax6000-stock)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x20000"
 	ubootenv_add_uci_sys_config "/dev/mtd2" "0x0" "0x10000" "0x20000"
diff --git a/target/linux/mediatek/dts/mt7986b-netgear-wax220.dts b/target/linux/mediatek/dts/mt7986b-netgear-wax220.dts
new file mode 100644
index 0000000000..f7da6e3630
--- /dev/null
+++ b/target/linux/mediatek/dts/mt7986b-netgear-wax220.dts
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7986b.dtsi"
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Netgear WAX220";
+	compatible = "netgear,wax220", "mediatek,mt7986b-spim-snand-rfb";
+
+	aliases {
+		serial0 = &uart0;
+		led-boot = &led_power_blue;
+		led-failsafe = &led_power_amber;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_amber;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		reset {
+			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+		};
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wlan5g_green {
+			gpios = <&pio 12 GPIO_ACTIVE_LOW>;
+			label = "green:wlan5g";
+		};
+
+		led_power_amber: power_amber {
+			gpios = <&pio 15 GPIO_ACTIVE_LOW>;
+			label = "amber:power";
+		};
+
+		wlan2g_green {
+			gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
+			label = "green:wlan2g";
+		};
+
+		led_power_blue: power_blue {
+			gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+			label = "blue:power";
+		};
+
+		led_power_green: power_green {
+			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+			label = "green:power";
+		};
+
+		wlan2g_blue {
+			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+			label = "blue:wlan2g";
+		};
+
+		lan_green {
+			gpios = <&pio 22 GPIO_ACTIVE_HIGH>;
+			label = "green:lan";
+		};
+
+		lan_amber {
+			gpios = <&pio 13 GPIO_ACTIVE_LOW>;
+			label = "amber:lan";
+		};
+
+		wlan5g_blue {
+			gpios = <&pio 2 GPIO_ACTIVE_LOW>;
+			label = "blue:wlan5g";
+		};
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-handle = <&phy6>;
+		phy-mode = "2500base-x";
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&mdio {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	phy6: ethernet-phy@6 {
+		reg = <6>;
+		reset-assert-us = <100000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+
+&pio {
+	spi_flash_pins: spi-flash-pins-33-to-38 {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+		conf-pu {
+			pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <0>; /* bias-disable */
+		};
+		conf-pd {
+			pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
+			drive-strength = <8>;
+			mediatek,pull-down-adv = <0>; /* bias-disable */
+		};
+	};
+
+	wf_2g_5g_pins: wf_2g_5g-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_2g", "wf_5g";
+		};
+		conf {
+			pins =  "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+				"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+				"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+				"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+				"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+				"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+				"WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+
+	wf_dbdc_pins: wf-dbdc-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_dbdc";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			 "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			 "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			 "WF0_TOP_CLK", "WF0_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_flash_pins>;
+	status = "okay";
+
+	spi_nand_flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-nand";
+		reg = <0>;
+
+		spi-max-frequency = <20000000>;
+		spi-tx-buswidth = <4>;
+		spi-rx-buswidth = <4>;
+
+		partitions: partitions {
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			compatible = "fixed-partitions";
+
+			partition@5fc0000 {
+				label = "Traffic";
+				reg = <0x5fc0000 0x200000>;
+			};
+
+			partition@63c0000 {
+				label = "NTGRcryptD";
+				reg = <0x63c0000 0x500000>;
+			};
+
+			partition@580000 {
+				label = "ubi";
+				reg = <0x580000 0x5140000>;
+			};
+
+			factory: partition@180000 {
+				label = "Factory";
+				reg = <0x180000 0x200000>;
+			};
+
+			partition@69c0000 {
+				label = "User_data";
+				reg = <0x69c0000 0x640000>;
+			};
+
+			partition@100000 {
+				label = "u-boot-env";
+				reg = <0x100000 0x80000>;
+			};
+
+			partition@68c0000 {
+				label = "LOG";
+				reg = <0x68c0000 0x100000>;
+			};
+
+			partition@5ac0000 {
+				label = "POT";
+				reg = <0x5ac0000 0x100000>;
+			};
+
+			partition@0 {
+				label = "BL2";
+				read-only;
+				reg = <0x0 0x100000>;
+			};
+
+			partition@5bc0000 {
+				label = "Language";
+				reg = <0x5bc0000 0x400000>;
+			};
+
+			partition@61c0000 {
+				label = "Cert";
+				reg = <0x61c0000 0x100000>;
+			};
+
+			partition@380000 {
+				label = "FIP";
+				reg = <0x380000 0x200000>;
+			};
+
+			partition@56c0000 {
+				label = "RAE";
+				reg = <0x56c0000 0x400000>;
+			};
+
+			partition@62c0000 {
+				label = "NTGRcryptK";
+				reg = <0x62c0000 0x100000>;
+			};
+		};
+	};
+
+};
+
+&trng {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+	pinctrl-names = "default", "dbdc";
+	pinctrl-0 = <&wf_2g_5g_pins>;
+	pinctrl-1 = <&wf_dbdc_pins>;
+
+	mediatek,mtd-eeprom = <&factory 0x0>;
+};
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
index 1cb00ce26d..0ba825fd2b 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
@@ -9,6 +9,11 @@ case $board in
 cudy,wr3000-v1)
 	ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
 	;;
+netgear,wax220)
+	ucidef_set_led_netdev "eth0" "LAN" "green:lan" "eth0"
+	ucidef_set_led_netdev "wlan2g" "WLAN2G" "blue:wlan2g" "phy0-ap0"
+	ucidef_set_led_netdev "wlan5g" "WLAN5G" "blue:wlan5g" "phy1-ap0"
+	;;
 xiaomi,redmi-router-ax6000-stock|\
 xiaomi,redmi-router-ax6000-ubootmod)
 	ucidef_set_led_netdev "wan" "wan" "rgb:network" "wan"
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
index a327a46108..8803326b27 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
@@ -11,6 +11,9 @@ mediatek_setup_interfaces()
 	asus,tuf-ax4200)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" eth1
 		;;
+	netgear,wax220)
+		ucidef_set_interface_lan "eth0"
+		;;
 	bananapi,bpi-r3)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 sfp2" "eth1 wan"
 		;;
@@ -66,6 +69,10 @@ mediatek_setup_macs()
 	bananapi,bpi-r3)
 		wan_mac=$(macaddr_add $(cat /sys/class/net/eth0/address) 1)
 		;;
+	netgear,wax220)
+		lan_mac=$(mtd_get_mac_ascii u-boot-env mac)
+		label_mac=$lan_mac
+		;;
 	qihoo,360t7)
 		lan_mac=$(mtd_get_mac_ascii factory lanMac)
 		wan_mac=$(macaddr_add "$lan_mac" 1)
diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
index a3db00f5e8..3969a7bfe4 100644
--- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
+++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
@@ -32,6 +32,11 @@ case "$board" in
 		[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
 		[ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr 1) > /sys${DEVPATH}/macaddress
 		;;
+	netgear,wax220)
+		hw_mac_addr=$(mtd_get_mac_ascii u-boot-env mac)
+		[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
+		[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 3 > /sys${DEVPATH}/macaddress
+		;;
 	qihoo,360t7)
 		addr=$(mtd_get_mac_ascii factory lanMac)
 		[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk
index 6323a05de2..ae25aee2ed 100644
--- a/target/linux/mediatek/image/filogic.mk
+++ b/target/linux/mediatek/image/filogic.mk
@@ -176,6 +176,22 @@ define Device/glinet_gl-mt3000
 endef
 TARGET_DEVICES += glinet_gl-mt3000
 
+define Device/netgear_wax220
+  DEVICE_VENDOR := Netgear
+  DEVICE_MODEL := WAX220
+  DEVICE_DTS := mt7986b-netgear-wax220
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
+  IMAGES := sysupgrade.bin
+  KERNEL_IN_UBI := 1
+  KERNEL := kernel-bin | lzma | \
+        fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+  KERNEL_INITRAMFS := kernel-bin | lzma | \
+        fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += netgear_wax220
+
 define Device/mediatek_mt7986a-rfb-nand
   DEVICE_VENDOR := MediaTek
   DEVICE_MODEL := MT7986 rfba AP (NAND)

From adc3ee1cc8e4b16ffb5b95fa9034fda81cb01a7a Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Wed, 21 Jun 2023 11:35:33 +0200
Subject: [PATCH 05/17] generic: 6.1: backport LEDs patch adding additional
 modes

Backport LEDs patch adding additional modes for split link speed and
half/full duplex state.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 ...dev-add-additional-specific-link-spe.patch | 242 ++++++++++++++++++
 ...dev-add-additional-specific-link-dup.patch | 138 ++++++++++
 ...dev-expose-hw_control-status-via-sys.patch |  45 ++++
 3 files changed, 425 insertions(+)
 create mode 100644 target/linux/generic/backport-6.1/805-v6.5-01-leds-trigger-netdev-add-additional-specific-link-spe.patch
 create mode 100644 target/linux/generic/backport-6.1/805-v6.5-02-leds-trigger-netdev-add-additional-specific-link-dup.patch
 create mode 100644 target/linux/generic/backport-6.1/805-v6.5-03-leds-trigger-netdev-expose-hw_control-status-via-sys.patch

diff --git a/target/linux/generic/backport-6.1/805-v6.5-01-leds-trigger-netdev-add-additional-specific-link-spe.patch b/target/linux/generic/backport-6.1/805-v6.5-01-leds-trigger-netdev-add-additional-specific-link-spe.patch
new file mode 100644
index 0000000000..1c564b3897
--- /dev/null
+++ b/target/linux/generic/backport-6.1/805-v6.5-01-leds-trigger-netdev-add-additional-specific-link-spe.patch
@@ -0,0 +1,242 @@
+From d5e01266e7f5fa12400d4c8aa4e86fe89dcc61e9 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Mon, 19 Jun 2023 22:46:58 +0200
+Subject: [PATCH 1/3] leds: trigger: netdev: add additional specific link speed
+ mode
+
+Add additional modes for specific link speed. Use ethtool APIs to get the
+current link speed and enable the LED accordingly. Under netdev event
+handler the rtnl lock is already held and is not needed to be set to
+access ethtool APIs.
+
+This is especially useful for PHY and Switch that supports LEDs hw
+control for specific link speed. (example scenario a PHY that have 2 LED
+connected one green and one orange where the green is turned on with
+1000mbps speed and orange is turned on with 10mpbs speed)
+
+On mode set from sysfs we check if we have enabled split link speed mode
+and reject enabling generic link mode to prevent wrong and redundant
+configuration.
+
+Rework logic on the set baseline state to support these new modes to
+select if we need to turn on or off the LED.
+
+Add additional modes:
+- link_10: Turn on LED when link speed is 10mbps
+- link_100: Turn on LED when link speed is 100mbps
+- link_1000: Turn on LED when link speed is 1000mbps
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Acked-by: Lee Jones <lee@kernel.org>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/leds/trigger/ledtrig-netdev.c | 80 +++++++++++++++++++++++----
+ include/linux/leds.h                  |  3 +
+ 2 files changed, 73 insertions(+), 10 deletions(-)
+
+--- a/drivers/leds/trigger/ledtrig-netdev.c
++++ b/drivers/leds/trigger/ledtrig-netdev.c
+@@ -13,6 +13,7 @@
+ #include <linux/atomic.h>
+ #include <linux/ctype.h>
+ #include <linux/device.h>
++#include <linux/ethtool.h>
+ #include <linux/init.h>
+ #include <linux/jiffies.h>
+ #include <linux/kernel.h>
+@@ -21,6 +22,7 @@
+ #include <linux/module.h>
+ #include <linux/netdevice.h>
+ #include <linux/mutex.h>
++#include <linux/rtnetlink.h>
+ #include <linux/timer.h>
+ #include "../leds.h"
+ 
+@@ -52,6 +54,8 @@ struct led_netdev_data {
+ 	unsigned int last_activity;
+ 
+ 	unsigned long mode;
++	int link_speed;
++
+ 	bool carrier_link_up;
+ 	bool hw_control;
+ };
+@@ -77,7 +81,24 @@ static void set_baseline_state(struct le
+ 	if (!trigger_data->carrier_link_up) {
+ 		led_set_brightness(led_cdev, LED_OFF);
+ 	} else {
++		bool blink_on = false;
++
+ 		if (test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode))
++			blink_on = true;
++
++		if (test_bit(TRIGGER_NETDEV_LINK_10, &trigger_data->mode) &&
++		    trigger_data->link_speed == SPEED_10)
++			blink_on = true;
++
++		if (test_bit(TRIGGER_NETDEV_LINK_100, &trigger_data->mode) &&
++		    trigger_data->link_speed == SPEED_100)
++			blink_on = true;
++
++		if (test_bit(TRIGGER_NETDEV_LINK_1000, &trigger_data->mode) &&
++		    trigger_data->link_speed == SPEED_1000)
++			blink_on = true;
++
++		if (blink_on)
+ 			led_set_brightness(led_cdev,
+ 					   led_cdev->blink_brightness);
+ 		else
+@@ -161,6 +182,18 @@ static bool can_hw_control(struct led_ne
+ 	return true;
+ }
+ 
++static void get_device_state(struct led_netdev_data *trigger_data)
++{
++	struct ethtool_link_ksettings cmd;
++
++	trigger_data->carrier_link_up = netif_carrier_ok(trigger_data->net_dev);
++	if (!trigger_data->carrier_link_up)
++		return;
++
++	if (!__ethtool_get_link_ksettings(trigger_data->net_dev, &cmd))
++		trigger_data->link_speed = cmd.base.speed;
++}
++
+ static ssize_t device_name_show(struct device *dev,
+ 				struct device_attribute *attr, char *buf)
+ {
+@@ -196,8 +229,12 @@ static int set_device_name(struct led_ne
+ 		    dev_get_by_name(&init_net, trigger_data->device_name);
+ 
+ 	trigger_data->carrier_link_up = false;
+-	if (trigger_data->net_dev != NULL)
+-		trigger_data->carrier_link_up = netif_carrier_ok(trigger_data->net_dev);
++	trigger_data->link_speed = SPEED_UNKNOWN;
++	if (trigger_data->net_dev != NULL) {
++		rtnl_lock();
++		get_device_state(trigger_data);
++		rtnl_unlock();
++	}
+ 
+ 	trigger_data->last_activity = 0;
+ 
+@@ -234,6 +271,9 @@ static ssize_t netdev_led_attr_show(stru
+ 
+ 	switch (attr) {
+ 	case TRIGGER_NETDEV_LINK:
++	case TRIGGER_NETDEV_LINK_10:
++	case TRIGGER_NETDEV_LINK_100:
++	case TRIGGER_NETDEV_LINK_1000:
+ 	case TRIGGER_NETDEV_TX:
+ 	case TRIGGER_NETDEV_RX:
+ 		bit = attr;
+@@ -249,7 +289,7 @@ static ssize_t netdev_led_attr_store(str
+ 				     size_t size, enum led_trigger_netdev_modes attr)
+ {
+ 	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
+-	unsigned long state;
++	unsigned long state, mode = trigger_data->mode;
+ 	int ret;
+ 	int bit;
+ 
+@@ -259,6 +299,9 @@ static ssize_t netdev_led_attr_store(str
+ 
+ 	switch (attr) {
+ 	case TRIGGER_NETDEV_LINK:
++	case TRIGGER_NETDEV_LINK_10:
++	case TRIGGER_NETDEV_LINK_100:
++	case TRIGGER_NETDEV_LINK_1000:
+ 	case TRIGGER_NETDEV_TX:
+ 	case TRIGGER_NETDEV_RX:
+ 		bit = attr;
+@@ -267,13 +310,20 @@ static ssize_t netdev_led_attr_store(str
+ 		return -EINVAL;
+ 	}
+ 
+-	cancel_delayed_work_sync(&trigger_data->work);
+-
+ 	if (state)
+-		set_bit(bit, &trigger_data->mode);
++		set_bit(bit, &mode);
+ 	else
+-		clear_bit(bit, &trigger_data->mode);
++		clear_bit(bit, &mode);
++
++	if (test_bit(TRIGGER_NETDEV_LINK, &mode) &&
++	    (test_bit(TRIGGER_NETDEV_LINK_10, &mode) ||
++	     test_bit(TRIGGER_NETDEV_LINK_100, &mode) ||
++	     test_bit(TRIGGER_NETDEV_LINK_1000, &mode)))
++		return -EINVAL;
++
++	cancel_delayed_work_sync(&trigger_data->work);
+ 
++	trigger_data->mode = mode;
+ 	trigger_data->hw_control = can_hw_control(trigger_data);
+ 
+ 	set_baseline_state(trigger_data);
+@@ -295,6 +345,9 @@ static ssize_t netdev_led_attr_store(str
+ 	static DEVICE_ATTR_RW(trigger_name)
+ 
+ DEFINE_NETDEV_TRIGGER(link, TRIGGER_NETDEV_LINK);
++DEFINE_NETDEV_TRIGGER(link_10, TRIGGER_NETDEV_LINK_10);
++DEFINE_NETDEV_TRIGGER(link_100, TRIGGER_NETDEV_LINK_100);
++DEFINE_NETDEV_TRIGGER(link_1000, TRIGGER_NETDEV_LINK_1000);
+ DEFINE_NETDEV_TRIGGER(tx, TRIGGER_NETDEV_TX);
+ DEFINE_NETDEV_TRIGGER(rx, TRIGGER_NETDEV_RX);
+ 
+@@ -338,6 +391,9 @@ static DEVICE_ATTR_RW(interval);
+ static struct attribute *netdev_trig_attrs[] = {
+ 	&dev_attr_device_name.attr,
+ 	&dev_attr_link.attr,
++	&dev_attr_link_10.attr,
++	&dev_attr_link_100.attr,
++	&dev_attr_link_1000.attr,
+ 	&dev_attr_rx.attr,
+ 	&dev_attr_tx.attr,
+ 	&dev_attr_interval.attr,
+@@ -368,9 +424,10 @@ static int netdev_trig_notify(struct not
+ 	mutex_lock(&trigger_data->lock);
+ 
+ 	trigger_data->carrier_link_up = false;
++	trigger_data->link_speed = SPEED_UNKNOWN;
+ 	switch (evt) {
+ 	case NETDEV_CHANGENAME:
+-		trigger_data->carrier_link_up = netif_carrier_ok(dev);
++		get_device_state(trigger_data);
+ 		fallthrough;
+ 	case NETDEV_REGISTER:
+ 		if (trigger_data->net_dev)
+@@ -384,7 +441,7 @@ static int netdev_trig_notify(struct not
+ 		break;
+ 	case NETDEV_UP:
+ 	case NETDEV_CHANGE:
+-		trigger_data->carrier_link_up = netif_carrier_ok(dev);
++		get_device_state(trigger_data);
+ 		break;
+ 	}
+ 
+@@ -427,7 +484,10 @@ static void netdev_trig_work(struct work
+ 	if (trigger_data->last_activity != new_activity) {
+ 		led_stop_software_blink(trigger_data->led_cdev);
+ 
+-		invert = test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode);
++		invert = test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode) ||
++			 test_bit(TRIGGER_NETDEV_LINK_10, &trigger_data->mode) ||
++			 test_bit(TRIGGER_NETDEV_LINK_100, &trigger_data->mode) ||
++			 test_bit(TRIGGER_NETDEV_LINK_1000, &trigger_data->mode);
+ 		interval = jiffies_to_msecs(
+ 				atomic_read(&trigger_data->interval));
+ 		/* base state is ON (link present) */
+--- a/include/linux/leds.h
++++ b/include/linux/leds.h
+@@ -530,6 +530,9 @@ static inline void *led_get_trigger_data
+ /* Trigger specific enum */
+ enum led_trigger_netdev_modes {
+ 	TRIGGER_NETDEV_LINK = 0,
++	TRIGGER_NETDEV_LINK_10,
++	TRIGGER_NETDEV_LINK_100,
++	TRIGGER_NETDEV_LINK_1000,
+ 	TRIGGER_NETDEV_TX,
+ 	TRIGGER_NETDEV_RX,
+ 
diff --git a/target/linux/generic/backport-6.1/805-v6.5-02-leds-trigger-netdev-add-additional-specific-link-dup.patch b/target/linux/generic/backport-6.1/805-v6.5-02-leds-trigger-netdev-add-additional-specific-link-dup.patch
new file mode 100644
index 0000000000..a5ab461828
--- /dev/null
+++ b/target/linux/generic/backport-6.1/805-v6.5-02-leds-trigger-netdev-add-additional-specific-link-dup.patch
@@ -0,0 +1,138 @@
+From f22f95b9ff1551c9bab13104131929f33d51f23f Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Mon, 19 Jun 2023 22:46:59 +0200
+Subject: [PATCH 2/3] leds: trigger: netdev: add additional specific link
+ duplex mode
+
+Add additional modes for specific link duplex. Use ethtool APIs to get the
+current link duplex and enable the LED accordingly. Under netdev event
+handler the rtnl lock is already held and is not needed to be set to
+access ethtool APIs.
+
+This is especially useful for PHY and Switch that supports LEDs hw
+control for specific link duplex.
+
+Add additional modes:
+- half_duplex: Turn on LED when link is half duplex
+- full_duplex: Turn on LED when link is full duplex
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Acked-by: Lee Jones <lee@kernel.org>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/leds/trigger/ledtrig-netdev.c | 27 +++++++++++++++++++++++++--
+ include/linux/leds.h                  |  2 ++
+ 2 files changed, 27 insertions(+), 2 deletions(-)
+
+--- a/drivers/leds/trigger/ledtrig-netdev.c
++++ b/drivers/leds/trigger/ledtrig-netdev.c
+@@ -55,6 +55,7 @@ struct led_netdev_data {
+ 
+ 	unsigned long mode;
+ 	int link_speed;
++	u8 duplex;
+ 
+ 	bool carrier_link_up;
+ 	bool hw_control;
+@@ -98,6 +99,14 @@ static void set_baseline_state(struct le
+ 		    trigger_data->link_speed == SPEED_1000)
+ 			blink_on = true;
+ 
++		if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &trigger_data->mode) &&
++		    trigger_data->duplex == DUPLEX_HALF)
++			blink_on = true;
++
++		if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &trigger_data->mode) &&
++		    trigger_data->duplex == DUPLEX_FULL)
++			blink_on = true;
++
+ 		if (blink_on)
+ 			led_set_brightness(led_cdev,
+ 					   led_cdev->blink_brightness);
+@@ -190,8 +199,10 @@ static void get_device_state(struct led_
+ 	if (!trigger_data->carrier_link_up)
+ 		return;
+ 
+-	if (!__ethtool_get_link_ksettings(trigger_data->net_dev, &cmd))
++	if (!__ethtool_get_link_ksettings(trigger_data->net_dev, &cmd)) {
+ 		trigger_data->link_speed = cmd.base.speed;
++		trigger_data->duplex = cmd.base.duplex;
++	}
+ }
+ 
+ static ssize_t device_name_show(struct device *dev,
+@@ -230,6 +241,7 @@ static int set_device_name(struct led_ne
+ 
+ 	trigger_data->carrier_link_up = false;
+ 	trigger_data->link_speed = SPEED_UNKNOWN;
++	trigger_data->duplex = DUPLEX_UNKNOWN;
+ 	if (trigger_data->net_dev != NULL) {
+ 		rtnl_lock();
+ 		get_device_state(trigger_data);
+@@ -274,6 +286,8 @@ static ssize_t netdev_led_attr_show(stru
+ 	case TRIGGER_NETDEV_LINK_10:
+ 	case TRIGGER_NETDEV_LINK_100:
+ 	case TRIGGER_NETDEV_LINK_1000:
++	case TRIGGER_NETDEV_HALF_DUPLEX:
++	case TRIGGER_NETDEV_FULL_DUPLEX:
+ 	case TRIGGER_NETDEV_TX:
+ 	case TRIGGER_NETDEV_RX:
+ 		bit = attr;
+@@ -302,6 +316,8 @@ static ssize_t netdev_led_attr_store(str
+ 	case TRIGGER_NETDEV_LINK_10:
+ 	case TRIGGER_NETDEV_LINK_100:
+ 	case TRIGGER_NETDEV_LINK_1000:
++	case TRIGGER_NETDEV_HALF_DUPLEX:
++	case TRIGGER_NETDEV_FULL_DUPLEX:
+ 	case TRIGGER_NETDEV_TX:
+ 	case TRIGGER_NETDEV_RX:
+ 		bit = attr;
+@@ -348,6 +364,8 @@ DEFINE_NETDEV_TRIGGER(link, TRIGGER_NETD
+ DEFINE_NETDEV_TRIGGER(link_10, TRIGGER_NETDEV_LINK_10);
+ DEFINE_NETDEV_TRIGGER(link_100, TRIGGER_NETDEV_LINK_100);
+ DEFINE_NETDEV_TRIGGER(link_1000, TRIGGER_NETDEV_LINK_1000);
++DEFINE_NETDEV_TRIGGER(half_duplex, TRIGGER_NETDEV_HALF_DUPLEX);
++DEFINE_NETDEV_TRIGGER(full_duplex, TRIGGER_NETDEV_FULL_DUPLEX);
+ DEFINE_NETDEV_TRIGGER(tx, TRIGGER_NETDEV_TX);
+ DEFINE_NETDEV_TRIGGER(rx, TRIGGER_NETDEV_RX);
+ 
+@@ -394,6 +412,8 @@ static struct attribute *netdev_trig_att
+ 	&dev_attr_link_10.attr,
+ 	&dev_attr_link_100.attr,
+ 	&dev_attr_link_1000.attr,
++	&dev_attr_full_duplex.attr,
++	&dev_attr_half_duplex.attr,
+ 	&dev_attr_rx.attr,
+ 	&dev_attr_tx.attr,
+ 	&dev_attr_interval.attr,
+@@ -425,6 +445,7 @@ static int netdev_trig_notify(struct not
+ 
+ 	trigger_data->carrier_link_up = false;
+ 	trigger_data->link_speed = SPEED_UNKNOWN;
++	trigger_data->duplex = DUPLEX_UNKNOWN;
+ 	switch (evt) {
+ 	case NETDEV_CHANGENAME:
+ 		get_device_state(trigger_data);
+@@ -487,7 +508,9 @@ static void netdev_trig_work(struct work
+ 		invert = test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode) ||
+ 			 test_bit(TRIGGER_NETDEV_LINK_10, &trigger_data->mode) ||
+ 			 test_bit(TRIGGER_NETDEV_LINK_100, &trigger_data->mode) ||
+-			 test_bit(TRIGGER_NETDEV_LINK_1000, &trigger_data->mode);
++			 test_bit(TRIGGER_NETDEV_LINK_1000, &trigger_data->mode) ||
++			 test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &trigger_data->mode) ||
++			 test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &trigger_data->mode);
+ 		interval = jiffies_to_msecs(
+ 				atomic_read(&trigger_data->interval));
+ 		/* base state is ON (link present) */
+--- a/include/linux/leds.h
++++ b/include/linux/leds.h
+@@ -533,6 +533,8 @@ enum led_trigger_netdev_modes {
+ 	TRIGGER_NETDEV_LINK_10,
+ 	TRIGGER_NETDEV_LINK_100,
+ 	TRIGGER_NETDEV_LINK_1000,
++	TRIGGER_NETDEV_HALF_DUPLEX,
++	TRIGGER_NETDEV_FULL_DUPLEX,
+ 	TRIGGER_NETDEV_TX,
+ 	TRIGGER_NETDEV_RX,
+ 
diff --git a/target/linux/generic/backport-6.1/805-v6.5-03-leds-trigger-netdev-expose-hw_control-status-via-sys.patch b/target/linux/generic/backport-6.1/805-v6.5-03-leds-trigger-netdev-expose-hw_control-status-via-sys.patch
new file mode 100644
index 0000000000..67528cafe0
--- /dev/null
+++ b/target/linux/generic/backport-6.1/805-v6.5-03-leds-trigger-netdev-expose-hw_control-status-via-sys.patch
@@ -0,0 +1,45 @@
+From b655892ffd6d89b0c7407e099c40dbde82ee3f03 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Mon, 19 Jun 2023 22:47:00 +0200
+Subject: [PATCH 3/3] leds: trigger: netdev: expose hw_control status via sysfs
+
+Expose hw_control status via sysfs for the netdev trigger to give
+userspace better understanding of the current state of the trigger and
+the LED.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
+Acked-by: Lee Jones <lee@kernel.org>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/leds/trigger/ledtrig-netdev.c | 11 +++++++++++
+ 1 file changed, 11 insertions(+)
+
+--- a/drivers/leds/trigger/ledtrig-netdev.c
++++ b/drivers/leds/trigger/ledtrig-netdev.c
+@@ -406,6 +406,16 @@ static ssize_t interval_store(struct dev
+ 
+ static DEVICE_ATTR_RW(interval);
+ 
++static ssize_t hw_control_show(struct device *dev,
++			       struct device_attribute *attr, char *buf)
++{
++	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
++
++	return sprintf(buf, "%d\n", trigger_data->hw_control);
++}
++
++static DEVICE_ATTR_RO(hw_control);
++
+ static struct attribute *netdev_trig_attrs[] = {
+ 	&dev_attr_device_name.attr,
+ 	&dev_attr_link.attr,
+@@ -417,6 +427,7 @@ static struct attribute *netdev_trig_att
+ 	&dev_attr_rx.attr,
+ 	&dev_attr_tx.attr,
+ 	&dev_attr_interval.attr,
++	&dev_attr_hw_control.attr,
+ 	NULL
+ };
+ ATTRIBUTE_GROUPS(netdev_trig);

From 68ef2d18567529e06e523df3e74a39ab210d00ce Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@nbd.name>
Date: Thu, 22 Jun 2023 15:58:30 +0200
Subject: [PATCH 06/17] netifd: update to the latest version

077e05f2b129 vlan/vlandev: pass through extra vlan information passed via hotplug
40fad91eb5be wireless: add network_vlan config attribute

Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 package/network/config/netifd/Makefile | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/package/network/config/netifd/Makefile b/package/network/config/netifd/Makefile
index 31fd0838a4..190f2fc570 100644
--- a/package/network/config/netifd/Makefile
+++ b/package/network/config/netifd/Makefile
@@ -5,9 +5,9 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/netifd.git
-PKG_SOURCE_DATE:=2023-06-04
-PKG_SOURCE_VERSION:=ec9dba72124597b7224bbfe75960386dc320f4bd
-PKG_MIRROR_HASH:=baee39a3882a2b03fc83a3a6a8963c340fa8d884c7a8c9e80e7d2dddc50e24bd
+PKG_SOURCE_DATE:=2023-06-21
+PKG_SOURCE_VERSION:=40fad91eb5be5959783d7bb06dcfcfb56bbbb9bd
+PKG_MIRROR_HASH:=cb0faf04a9a010e82575289d3128b459fd81d156a793647a093499a7af5276f0
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 
 PKG_LICENSE:=GPL-2.0

From df8e4b6c2e6440bc9a31467de1739c69c328e391 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Daniel=20Gonz=C3=A1lez=20Cabanelas?= <dgcbueu@gmail.com>
Date: Wed, 21 Jun 2023 23:14:02 +0200
Subject: [PATCH 07/17] bmips: add support for Arcadyan AR7516
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The Arcadyan AR7516, AKA Orange Bright Box or EE Bright Box 1, is a wifi
fast ethernet router, 2.4 GHz single band with two internal antennas. It
comes with a horizontal stand black shiny casing.

Newer Bright Box 1 model stands vertically, and comes with a totally
different board inside, not compatible with this firmware.

Hardware:
 - SoC: Broadcom BCM6328
 - CPU: single core BMIPS4350 V7.5 @ 320Mhz
 - RAM: 64 MB DDR2
 - Flash: 8 MB SPI NOR
 - Ethernet LAN: 4x 100Mbit
 - Wifi 2.4 GHz: Broadcom BCM43227 802.11bgn (onboard)
 - USB: 1x 2.0
 - ADSL: yes, unsupported
 - Buttons: 2x
 - LEDs: 9x, power LED is hardware controlled
 - UART: yes

Installation in two steps, new CFE bootloader and firmware:

Install new CFE:
  1. Power off the router and press the RESET button
  2. Power on the router and wait some seconds
  3. Release the RESET button
  3. Browse to http://192.168.1.1, this web interface will offer both
     firmware (“Software”) upgrade and bootloader upgrade; be sure to
     use the bootloader section of the upload form.
  4. Upload the new CFE (availabe at the wiki page)
  5. Wait about a minute for flashing to finish and reboot into the new bootloader.

Install OpenWrt via new CFE web UI:
  1. After installing the new CFE, visit http://192.168.1.1
  2. Upload the Openwrt cfe firmware
  5. Wait a few minutes for it to finish

Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
---
 .../bcm6328/base-files/etc/board.d/01_leds    |   4 +
 .../bcm6328/base-files/etc/board.d/02_network |   4 +
 .../base-files/etc/uci-defaults/09_fix_crc    |   1 +
 .../bmips/dts/bcm6328-arcadyan-ar7516.dts     | 186 ++++++++++++++++++
 target/linux/bmips/image/bcm6328.mk           |  13 ++
 5 files changed, 208 insertions(+)
 create mode 100644 target/linux/bmips/dts/bcm6328-arcadyan-ar7516.dts

diff --git a/target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds b/target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds
index 5e80eb34e7..b2ccc9a60e 100644
--- a/target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds
+++ b/target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds
@@ -6,6 +6,10 @@
 board_config_update
 
 case "$(board_name)" in
+arcadyan,ar7516)
+	ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan"
+	ucidef_set_led_netdev "wlan0" "WiFi" "green:wifi" "phy0-ap0"
+	;;
 nucom,r5010unv2 |\
 sercomm,ad1018)
 	ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1"
diff --git a/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network b/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network
index bfedad9e45..391e38c4dc 100644
--- a/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network
+++ b/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network
@@ -5,6 +5,10 @@
 board_config_update
 
 case "$(board_name)" in
+arcadyan,ar7516)
+	ucidef_set_bridge_device switch
+	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+	;;
 comtrend,ar-5381u |\
 comtrend,ar-5387un |\
 nucom,r5010unv2)
diff --git a/target/linux/bmips/bcm6328/base-files/etc/uci-defaults/09_fix_crc b/target/linux/bmips/bcm6328/base-files/etc/uci-defaults/09_fix_crc
index 2056ea017f..e521af36ba 100644
--- a/target/linux/bmips/bcm6328/base-files/etc/uci-defaults/09_fix_crc
+++ b/target/linux/bmips/bcm6328/base-files/etc/uci-defaults/09_fix_crc
@@ -3,6 +3,7 @@
 . /lib/functions.sh
 
 case "$(board_name)" in
+arcadyan,ar7516 |\
 comtrend,ar-5381u |\
 comtrend,ar-5387un |\
 nucom,r5010unv2)
diff --git a/target/linux/bmips/dts/bcm6328-arcadyan-ar7516.dts b/target/linux/bmips/dts/bcm6328-arcadyan-ar7516.dts
new file mode 100644
index 0000000000..cc50f57549
--- /dev/null
+++ b/target/linux/bmips/dts/bcm6328-arcadyan-ar7516.dts
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "bcm6328.dtsi"
+
+/ {
+	model = "Arcadyan AR7516";
+	compatible = "arcadyan,ar7516", "brcm,bcm6328";
+
+	aliases {
+		led-failsafe = &led_upgrade_green;
+		led-upgrade = &led_upgrade_green;
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+		};
+	};
+
+	bcm43227-sprom {
+		compatible = "brcm,bcma-sprom";
+
+		pci-bus = <1>;
+		pci-dev = <0>;
+
+		nvmem-cells = <&macaddr_cfe_6a0>;
+		nvmem-cell-names = "mac-address";
+		mac-address-increment = <1>;
+
+		brcm,sprom = "brcm/bcm43227-sprom.bin";
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ethernet {
+	status = "okay";
+
+	nvmem-cells = <&macaddr_cfe_6a0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&hsspi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <16666667>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			cfe: partition@0 {
+				label = "cfe";
+				reg = <0x000000 0x010000>;
+				read-only;
+			};
+
+			partition@10000 {
+				compatible = "brcm,bcm963xx-imagetag";
+				label = "firmware";
+				reg = <0x010000 0x7e0000>;
+			};
+
+			partition@7f0000 {
+				label = "nvram";
+				reg = <0x7f0000 0x010000>;
+			};
+		};
+	};
+};
+
+&leds {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
+		     &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led
+		     &pinctrl_leds>;
+
+	led_upgrade_green: led@1 {
+		reg = <1>;
+		label = "green:upgrade";
+	};
+
+	led@6 {
+		reg = <6>;
+		active-low;
+		label = "green:wan";
+	};
+
+	led@7 {
+		reg = <7>;
+		active-low;
+		label = "green:wifi";
+	};
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl_leds: leds {
+		function = "led";
+		pins = "gpio1", "gpio6", "gpio7";
+	};
+};
+
+&switch0 {
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan1";
+
+			phy-handle = <&phy1>;
+			phy-mode = "mii";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan2";
+
+			phy-handle = <&phy2>;
+			phy-mode = "mii";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan3";
+
+			phy-handle = <&phy3>;
+			phy-mode = "mii";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "wan";
+
+			phy-handle = <&phy4>;
+			phy-mode = "mii";
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usbh {
+	status = "okay";
+};
+
+&cfe {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_cfe_6a0: macaddr@6a0 {
+		reg = <0x6a0 0x6>;
+	};
+};
diff --git a/target/linux/bmips/image/bcm6328.mk b/target/linux/bmips/image/bcm6328.mk
index 8023ef8fa1..fd0cf16dbb 100644
--- a/target/linux/bmips/image/bcm6328.mk
+++ b/target/linux/bmips/image/bcm6328.mk
@@ -1,5 +1,18 @@
 # SPDX-License-Identifier: GPL-2.0-or-later
 
+define Device/arcadyan_ar7516
+  $(Device/bcm63xx-cfe)
+  DEVICE_VENDOR := Arcadyan
+  DEVICE_MODEL := AR7516
+  CHIP_ID := 6328
+  CFE_BOARD_ID := AR7516AAW
+  FLASH_MB := 8
+  DEVICE_PACKAGES += $(USB2_PACKAGES) \
+    $(B43_PACKAGES) broadcom-43227-sprom \
+    kmod-leds-bcm6328
+endef
+TARGET_DEVICES += arcadyan_ar7516
+
 define Device/comtrend_ar-5381u
   $(Device/bcm63xx-cfe)
   DEVICE_VENDOR := Comtrend

From 1b467a902ec9b8bf29805c6928627e8bbad0f14c Mon Sep 17 00:00:00 2001
From: David Bauer <mail@david-bauer.net>
Date: Mon, 3 Apr 2023 13:56:58 +0200
Subject: [PATCH 08/17] ath79: add support for Aruba AP-115

Hardware
========

CPU   Qualcomm Atheros QCA9558
RAM   256MB DDR2
FLASH 2x 16M SPI-NOR (Macronix MX25L12805D)
WIFI  Qualcomm Atheros QCA9558
      Atheros AR9590

Installation
============

1. Attach to the serial console of the AP-105.
   Interrupt autoboot and change the U-Boot env.

   $ setenv rb_openwrt "setenv ipaddr 192.168.1.1;
     setenv serverip 192.168.1.66;
     netget 0x80060000 ap115.bin; go 0x80060000"
   $ setenv fb_openwrt "bank 1;
     cp.b 0xbf100040 0x80060000 0x10000; go 0x80060000"
   $ setenv bootcmd "run fb_openwrt"
   $ saveenv

2. Load the OpenWrt initramfs image on the device using TFTP.
   Place the initramfs image as "ap105.bin" in the TFTP server
   root directory, connect it to the AP and make the server reachable
   at 192.168.1.66/24.

   $ run rb_openwrt

3. Once OpenWrt booted, transfer the sysupgrade image to the device
   using scp and use sysupgrade to install the firmware.

Signed-off-by: David Bauer <mail@david-bauer.net>
---
 package/boot/uboot-envtools/files/ath79       |   1 +
 .../linux/ath79/dts/qca9558_aruba_ap-115.dts  | 239 ++++++++++++++++++
 .../etc/hotplug.d/firmware/10-ath9k-eeprom    |   6 +
 target/linux/ath79/image/generic.mk           |  15 ++
 4 files changed, 261 insertions(+)
 create mode 100644 target/linux/ath79/dts/qca9558_aruba_ap-115.dts

diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79
index 7c30aa052a..5201b8b27a 100644
--- a/package/boot/uboot-envtools/files/ath79
+++ b/package/boot/uboot-envtools/files/ath79
@@ -93,6 +93,7 @@ zyxel,nbg6616)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"
 	;;
 aruba,ap-105|\
+aruba,ap-115|\
 aruba,ap-175|\
 dongwon,dw02-412h-64m|\
 dongwon,dw02-412h-128m|\
diff --git a/target/linux/ath79/dts/qca9558_aruba_ap-115.dts b/target/linux/ath79/dts/qca9558_aruba_ap-115.dts
new file mode 100644
index 0000000000..b8aed4c283
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_aruba_ap-115.dts
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "aruba,ap-115", "qca,qca9558";
+	model = "Aruba AP-115";
+
+	aliases {
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_red;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_red;
+		label-mac-device = &eth0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,9600n8";
+	};
+
+	/**
+	 * Currently unused GPIOs in OpenWrt:
+	 *
+	 * TPM-CLK: 19
+	 * TPM-IO: 20
+	 * ETH-PHY-Interrupt: 11
+	 * Power-DC: 22
+	 * Power-PoE: 23
+	 * Power-PoE-8023af: 17
+	 */
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power_green: power-green {
+			label = "green:power";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+		
+		led_power_red: power-red {
+			label = "red:power";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+		};
+
+		radio-24-green {
+			label = "green:radio-24";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		radio-24-amber {
+			label = "amber:radio-24";
+			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+		};
+
+		radio-5-green {
+			label = "green:radio-5";
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+
+		radio-5-amber {
+			label = "amber:radio-5";
+			gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_usb_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+
+	ath9k: wifi@0,0 {
+		compatible = "pci168c,0033";
+		reg = <0x0000 0 0 0 0>;
+		qca,no-eeprom;
+
+		nvmem-cells = <&macaddr_oemdata_1d>;
+		nvmem-cell-names = "mac-address";
+
+		mac-address-increment = <1>;
+	};
+};
+
+&pinmux {
+	/**
+	 * Ugly hack ahead!
+	 *
+	 * GPIO05: Bank1-CS  / Bank2-CLK
+	 * GPIO14: Bank1-CLK / Bank2-CS
+	 *
+	 * We can not support this with OpenWrt, as this
+	 * would require us to influence the pinmux based on the CS.
+	 * 
+	 * We force-select Bank 1. Remember to blame Aruba for that.
+	 */
+	cs0_pin5: spi-cs0-pin5 {
+		pinctrl-single,bits = <0x4 0x900 0xff00>;
+	};
+
+	clk_pin14: spi-cs1-pin14 {
+		pinctrl-single,bits = <0xc 0x0a0000 0xff0000>;
+	};
+};
+
+&spi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cs0_pin5 &clk_pin14>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@1 {
+				label = "flash-full";
+				reg = <0x0 0x1000000>;
+				read-only;
+			};
+
+			uboot: partition@0 {
+				label = "u-boot";
+				reg = <0x000000 0x040000>;
+				read-only;
+			};
+
+			/* Here be dragons */
+
+			partition@100000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x100000 0xe00000>;
+			};
+
+			oemdata: partition@fe0000 {
+				label = "oemdata";
+				reg = <0xfe0000 0x010000>;
+				read-only;
+			};
+
+			partition@ff0000 {
+				label = "u-boot-env";
+				reg = <0xff0000 0x10000>;
+			};
+		};
+	};
+};
+
+&wmac {
+	status = "okay";
+
+	qca,no-eeprom;
+	nvmem-cells = <&macaddr_oemdata_1d>;
+	nvmem-cell-names = "mac-address";
+};
+
+&mdio0 {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+
+		reset-gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <10000>;
+
+		eee-broken-100tx;
+		eee-broken-1000t;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	nvmem-cells = <&macaddr_oemdata_1d>;
+	nvmem-cell-names = "mac-address";
+
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+
+	pll-data = <0xa6000000 0xa0000101 0xa0001313>;
+
+	gmac-config {
+		device = <&gmac>;
+		ge0-sgmii = <0>;
+		txen-delay = <3>;
+		txd-delay = <3>;
+		rxdv-delay = <3>;
+		rxd-delay = <3>;
+		rgmii-enabled = <1>;
+	};
+};
+
+&oemdata {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_oemdata_1d: macaddr@1d {
+		reg = <0x1d 0x6>;
+	};
+};
+
+&usb_phy0 {
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index a57479b87c..c46573ece5 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -12,6 +12,9 @@ case "$FIRMWARE" in
 	8dev,lima)
 		caldata_extract "art" 0x1000 0x800
 		;;
+	aruba,ap-115)
+		caldata_extract "oemdata" 0x1000 0x440
+		;;
 	asus,pl-ac56|\
 	asus,rp-ac51|\
 	asus,rp-ac66)
@@ -79,6 +82,9 @@ case "$FIRMWARE" in
 	;;
 "ath9k-eeprom-pci-0000:00:00.0.bin")
 	case $board in
+	aruba,ap-115)
+		caldata_extract "oemdata" 0x5000 0x440
+		;;
 	avm,fritz300e)
 		caldata_extract_reverse "urloader" 0x1541 0x440
 		;;
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 788520120d..1a558c30a0 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -413,6 +413,21 @@ define Device/aruba_ap-105
 endef
 TARGET_DEVICES += aruba_ap-105
 
+define Device/aruba_ap-115
+  SOC := qca9558
+  DEVICE_VENDOR := Aruba
+  DEVICE_MODEL := AP-115
+  IMAGE_SIZE := 16000k
+  DEVICE_PACKAGES := kmod-usb2
+  LOADER_TYPE := bin
+  LOADER_FLASH_OFFS := 0x102000
+  COMPILE := loader-$(1).bin
+  COMPILE/loader-$(1).bin := loader-okli-compile
+  KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 8128 | uImage none
+  KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel
+endef
+TARGET_DEVICES += aruba_ap-115
+
 define Device/aruba_ap-175
   SOC := ar7161
   DEVICE_VENDOR := Aruba

From ed816f6ba8b5e3df609e5fc53f7bcb09bdaa16be Mon Sep 17 00:00:00 2001
From: David Bauer <mail@david-bauer.net>
Date: Wed, 17 May 2023 12:04:00 +0200
Subject: [PATCH 09/17] mac80211: always use mac80211 loss detection

ath10k does not report excessive loss in case of broken block-ack
sessions. The loss is communicated to the host-os, but ath10k does not
trigger a low-ack events by itself.

The mac80211 framework for loss detection however detects this
circumstance well in case of ath10k. So use it regardless of ath10k's
own loss detection mechanism.

Signed-off-by: David Bauer <mail@david-bauer.net>
---
 ...1-always-use-mac80211-loss-detection.patch | 36 +++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 package/kernel/mac80211/patches/subsys/340-mac80211-always-use-mac80211-loss-detection.patch

diff --git a/package/kernel/mac80211/patches/subsys/340-mac80211-always-use-mac80211-loss-detection.patch b/package/kernel/mac80211/patches/subsys/340-mac80211-always-use-mac80211-loss-detection.patch
new file mode 100644
index 0000000000..e084773fd9
--- /dev/null
+++ b/package/kernel/mac80211/patches/subsys/340-mac80211-always-use-mac80211-loss-detection.patch
@@ -0,0 +1,36 @@
+From cdf461888f900c3a149b10a04d72b4a590ecdec3 Mon Sep 17 00:00:00 2001
+From: David Bauer <mail@david-bauer.net>
+Date: Tue, 16 May 2023 23:11:32 +0200
+Subject: [PATCH] mac80211: always use mac80211 loss detection
+
+ath10k does not report excessive loss in case of broken block-ack
+sessions. The loss is communicated to the host-os, but ath10k does not
+trigger a low-ack events by itself.
+
+The mac80211 framework for loss detection however detects this
+circumstance well in case of ath10k. So use it regardless of ath10k's
+own loss detection mechanism.
+
+Patching this in mac80211 does allow this hack to be used with any
+flavor of ath10k/ath11k.
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+---
+ net/mac80211/status.c | 6 ------
+ 1 file changed, 6 deletions(-)
+
+--- a/net/mac80211/status.c
++++ b/net/mac80211/status.c
+@@ -794,12 +794,6 @@ static void ieee80211_lost_packet(struct
+ 	unsigned long pkt_time = STA_LOST_PKT_TIME;
+ 	unsigned int pkt_thr = STA_LOST_PKT_THRESHOLD;
+ 
+-	/* If driver relies on its own algorithm for station kickout, skip
+-	 * mac80211 packet loss mechanism.
+-	 */
+-	if (ieee80211_hw_check(&sta->local->hw, REPORTS_LOW_ACK))
+-		return;
+-
+ 	/* This packet was aggregated but doesn't carry status info */
+ 	if ((info->flags & IEEE80211_TX_CTL_AMPDU) &&
+ 	    !(info->flags & IEEE80211_TX_STAT_AMPDU))

From 45176e81c6548bdd2d921848936f792222675d39 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@nbd.name>
Date: Thu, 22 Jun 2023 15:58:30 +0200
Subject: [PATCH 10/17] netifd: update to the latest version

1571e18e4a69 bridge: add support for configuring extra tagged vlans on member devices
b719f189f243 bridge: make hotplug-added vlans default to tagged
edf3aced9f9a bridge: add support for adding vlan ranges via hotplug

Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 package/network/config/netifd/Makefile | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/package/network/config/netifd/Makefile b/package/network/config/netifd/Makefile
index 190f2fc570..69fdfa28ec 100644
--- a/package/network/config/netifd/Makefile
+++ b/package/network/config/netifd/Makefile
@@ -5,9 +5,9 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/netifd.git
-PKG_SOURCE_DATE:=2023-06-21
-PKG_SOURCE_VERSION:=40fad91eb5be5959783d7bb06dcfcfb56bbbb9bd
-PKG_MIRROR_HASH:=cb0faf04a9a010e82575289d3128b459fd81d156a793647a093499a7af5276f0
+PKG_SOURCE_DATE:=2023-06-23
+PKG_SOURCE_VERSION:=edf3aced9f9ae4b07cfbb98d3919ddc7a9e44362
+PKG_MIRROR_HASH:=cae6397d7e10d5f2659bf4c1e66b1ed7198693d2d4e448c414780fcf2a43ea94
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 
 PKG_LICENSE:=GPL-2.0

From 9219b0660a91330e099fca061dff468a028c446e Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@nbd.name>
Date: Thu, 22 Jun 2023 19:21:42 +0200
Subject: [PATCH 11/17] mac80211: fix HE issues with AP_VLAN interfaces

Fixes issues with aggregation

Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 ...sband-iftype-data-lookup-for-AP_VLAN.patch | 35 +++++++++++++++++++
 .../500-mac80211_configure_antenna_gain.patch |  4 +--
 2 files changed, 37 insertions(+), 2 deletions(-)
 create mode 100644 package/kernel/mac80211/patches/subsys/337-mac80211-fix-sband-iftype-data-lookup-for-AP_VLAN.patch

diff --git a/package/kernel/mac80211/patches/subsys/337-mac80211-fix-sband-iftype-data-lookup-for-AP_VLAN.patch b/package/kernel/mac80211/patches/subsys/337-mac80211-fix-sband-iftype-data-lookup-for-AP_VLAN.patch
new file mode 100644
index 0000000000..9d8b1978b2
--- /dev/null
+++ b/package/kernel/mac80211/patches/subsys/337-mac80211-fix-sband-iftype-data-lookup-for-AP_VLAN.patch
@@ -0,0 +1,35 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Thu, 22 Jun 2023 18:02:25 +0200
+Subject: [PATCH] mac80211: fix sband iftype data lookup for AP_VLAN
+
+AP_VLAN interfaces are virtual, so doesn't really exist as a type for
+capabilities. When passed in as a type, AP is the one that's really intended.
+
+Fixes: c4cbaf7973a7 ("cfg80211: Add support for HE")
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/include/net/cfg80211.h
++++ b/include/net/cfg80211.h
+@@ -567,6 +567,9 @@ ieee80211_get_sband_iftype_data(const st
+ 	if (WARN_ON(iftype >= NL80211_IFTYPE_MAX))
+ 		return NULL;
+ 
++	if (iftype == NL80211_IFTYPE_AP_VLAN)
++		iftype = NL80211_IFTYPE_AP;
++
+ 	for (i = 0; i < sband->n_iftype_data; i++)  {
+ 		const struct ieee80211_sband_iftype_data *data =
+ 			&sband->iftype_data[i];
+--- a/include/net/cfg80211.h
++++ b/include/net/cfg80211.h
+@@ -567,6 +567,9 @@ ieee80211_get_sband_iftype_data(const st
+ 	if (WARN_ON(iftype >= NL80211_IFTYPE_MAX))
+ 		return NULL;
+ 
++	if (iftype == NL80211_IFTYPE_AP_VLAN)
++		iftype = NL80211_IFTYPE_AP;
++
+ 	for (i = 0; i < sband->n_iftype_data; i++)  {
+ 		const struct ieee80211_sband_iftype_data *data =
+ 			&sband->iftype_data[i];
diff --git a/package/kernel/mac80211/patches/subsys/500-mac80211_configure_antenna_gain.patch b/package/kernel/mac80211/patches/subsys/500-mac80211_configure_antenna_gain.patch
index 4a3984fb42..7438f4fb88 100644
--- a/package/kernel/mac80211/patches/subsys/500-mac80211_configure_antenna_gain.patch
+++ b/package/kernel/mac80211/patches/subsys/500-mac80211_configure_antenna_gain.patch
@@ -1,6 +1,6 @@
 --- a/include/net/cfg80211.h
 +++ b/include/net/cfg80211.h
-@@ -4081,6 +4081,7 @@ struct mgmt_frame_regs {
+@@ -4087,6 +4087,7 @@ struct mgmt_frame_regs {
   *	(as advertised by the nl80211 feature flag.)
   * @get_tx_power: store the current TX power into the dbm variable;
   *	return 0 if successful
@@ -8,7 +8,7 @@
   *
   * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting
   *	functions to adjust rfkill hw state
-@@ -4431,6 +4432,7 @@ struct cfg80211_ops {
+@@ -4437,6 +4438,7 @@ struct cfg80211_ops {
  				enum nl80211_tx_power_setting type, int mbm);
  	int	(*get_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev,
  				int *dbm);

From b99dd5b8bda2ce8f627326cddb69206abf5742f9 Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Fri, 23 Jun 2023 05:48:52 +0200
Subject: [PATCH 12/17] generic: 6.1: backport qca8k patch enabling additional
 LED trigger modes

Backport qca8k patch enabling additional netdev LED trigger modes.

Additional mode supported for hw control:
- link_10
- link_100
- link_1000
- half_duplex
- full_duplex

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 ...d-support-for-additional-modes-for-n.patch | 64 +++++++++++++++++++
 1 file changed, 64 insertions(+)
 create mode 100644 target/linux/generic/backport-6.1/806-v6.5-net-dsa-qca8k-add-support-for-additional-modes-for-n.patch

diff --git a/target/linux/generic/backport-6.1/806-v6.5-net-dsa-qca8k-add-support-for-additional-modes-for-n.patch b/target/linux/generic/backport-6.1/806-v6.5-net-dsa-qca8k-add-support-for-additional-modes-for-n.patch
new file mode 100644
index 0000000000..ac322e1939
--- /dev/null
+++ b/target/linux/generic/backport-6.1/806-v6.5-net-dsa-qca8k-add-support-for-additional-modes-for-n.patch
@@ -0,0 +1,64 @@
+From 2555f35a4f428a9bfdf09aa0459dbfdf59a24a9a Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Wed, 21 Jun 2023 11:54:09 +0200
+Subject: [PATCH] net: dsa: qca8k: add support for additional modes for netdev
+ trigger
+
+The QCA8K switch supports additional modes that can be handled in
+hardware for the LED netdev trigger.
+
+Add these additional modes to further support the Switch LEDs and
+offload more blink modes.
+
+Add additional modes:
+- link_10
+- link_100
+- link_1000
+- half_duplex
+- full_duplex
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
+Link: https://lore.kernel.org/r/20230621095409.25859-1-ansuelsmth@gmail.com
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/dsa/qca/qca8k-leds.c | 20 ++++++++++++++++++++
+ 1 file changed, 20 insertions(+)
+
+--- a/drivers/net/dsa/qca/qca8k-leds.c
++++ b/drivers/net/dsa/qca/qca8k-leds.c
+@@ -68,6 +68,16 @@ qca8k_parse_netdev(unsigned long rules,
+ 		*offload_trigger |= QCA8K_LED_TX_BLINK_MASK;
+ 	if (test_bit(TRIGGER_NETDEV_RX, &rules))
+ 		*offload_trigger |= QCA8K_LED_RX_BLINK_MASK;
++	if (test_bit(TRIGGER_NETDEV_LINK_10, &rules))
++		*offload_trigger |= QCA8K_LED_LINK_10M_EN_MASK;
++	if (test_bit(TRIGGER_NETDEV_LINK_100, &rules))
++		*offload_trigger |= QCA8K_LED_LINK_100M_EN_MASK;
++	if (test_bit(TRIGGER_NETDEV_LINK_1000, &rules))
++		*offload_trigger |= QCA8K_LED_LINK_1000M_EN_MASK;
++	if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &rules))
++		*offload_trigger |= QCA8K_LED_HALF_DUPLEX_MASK;
++	if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &rules))
++		*offload_trigger |= QCA8K_LED_FULL_DUPLEX_MASK;
+ 
+ 	if (rules && !*offload_trigger)
+ 		return -EOPNOTSUPP;
+@@ -322,6 +332,16 @@ qca8k_cled_hw_control_get(struct led_cla
+ 		set_bit(TRIGGER_NETDEV_TX, rules);
+ 	if (val & QCA8K_LED_RX_BLINK_MASK)
+ 		set_bit(TRIGGER_NETDEV_RX, rules);
++	if (val & QCA8K_LED_LINK_10M_EN_MASK)
++		set_bit(TRIGGER_NETDEV_LINK_10, rules);
++	if (val & QCA8K_LED_LINK_100M_EN_MASK)
++		set_bit(TRIGGER_NETDEV_LINK_100, rules);
++	if (val & QCA8K_LED_LINK_1000M_EN_MASK)
++		set_bit(TRIGGER_NETDEV_LINK_1000, rules);
++	if (val & QCA8K_LED_HALF_DUPLEX_MASK)
++		set_bit(TRIGGER_NETDEV_HALF_DUPLEX, rules);
++	if (val & QCA8K_LED_FULL_DUPLEX_MASK)
++		set_bit(TRIGGER_NETDEV_FULL_DUPLEX, rules);
+ 
+ 	return 0;
+ }

From f343001b251a8ce080ec770f980ce67f4bd66bca Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@nbd.name>
Date: Fri, 23 Jun 2023 17:33:50 +0200
Subject: [PATCH 13/17] mac80211: fix quilt patch corruption

Fixes: 9219b0660a91 ("mac80211: fix HE issues with AP_VLAN interfaces")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 ...11-fix-sband-iftype-data-lookup-for-AP_VLAN.patch | 12 ------------
 .../subsys/500-mac80211_configure_antenna_gain.patch |  4 ++--
 2 files changed, 2 insertions(+), 14 deletions(-)

diff --git a/package/kernel/mac80211/patches/subsys/337-mac80211-fix-sband-iftype-data-lookup-for-AP_VLAN.patch b/package/kernel/mac80211/patches/subsys/337-mac80211-fix-sband-iftype-data-lookup-for-AP_VLAN.patch
index 9d8b1978b2..67b4284949 100644
--- a/package/kernel/mac80211/patches/subsys/337-mac80211-fix-sband-iftype-data-lookup-for-AP_VLAN.patch
+++ b/package/kernel/mac80211/patches/subsys/337-mac80211-fix-sband-iftype-data-lookup-for-AP_VLAN.patch
@@ -21,15 +21,3 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	for (i = 0; i < sband->n_iftype_data; i++)  {
  		const struct ieee80211_sband_iftype_data *data =
  			&sband->iftype_data[i];
---- a/include/net/cfg80211.h
-+++ b/include/net/cfg80211.h
-@@ -567,6 +567,9 @@ ieee80211_get_sband_iftype_data(const st
- 	if (WARN_ON(iftype >= NL80211_IFTYPE_MAX))
- 		return NULL;
- 
-+	if (iftype == NL80211_IFTYPE_AP_VLAN)
-+		iftype = NL80211_IFTYPE_AP;
-+
- 	for (i = 0; i < sband->n_iftype_data; i++)  {
- 		const struct ieee80211_sband_iftype_data *data =
- 			&sband->iftype_data[i];
diff --git a/package/kernel/mac80211/patches/subsys/500-mac80211_configure_antenna_gain.patch b/package/kernel/mac80211/patches/subsys/500-mac80211_configure_antenna_gain.patch
index 7438f4fb88..58a590682a 100644
--- a/package/kernel/mac80211/patches/subsys/500-mac80211_configure_antenna_gain.patch
+++ b/package/kernel/mac80211/patches/subsys/500-mac80211_configure_antenna_gain.patch
@@ -1,6 +1,6 @@
 --- a/include/net/cfg80211.h
 +++ b/include/net/cfg80211.h
-@@ -4087,6 +4087,7 @@ struct mgmt_frame_regs {
+@@ -4084,6 +4084,7 @@ struct mgmt_frame_regs {
   *	(as advertised by the nl80211 feature flag.)
   * @get_tx_power: store the current TX power into the dbm variable;
   *	return 0 if successful
@@ -8,7 +8,7 @@
   *
   * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting
   *	functions to adjust rfkill hw state
-@@ -4437,6 +4438,7 @@ struct cfg80211_ops {
+@@ -4434,6 +4435,7 @@ struct cfg80211_ops {
  				enum nl80211_tx_power_setting type, int mbm);
  	int	(*get_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev,
  				int *dbm);

From 3ebebf08be950a8a0f3bf5b2c3db910621f2cc21 Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Fri, 23 Jun 2023 17:44:10 +0200
Subject: [PATCH 14/17] netfilter: fix typo in nf-socket and nf-tproxy kconfig

Fix a typo where the wrong KCONFIG was used and fix selecting the
correct kernel config option to use these packages.

Fixes: 4f443c885ded ("netfilter: separate packages for kmod-ipt-socket and kmod-ipt-tproxy")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 package/kernel/linux/modules/netfilter.mk | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/package/kernel/linux/modules/netfilter.mk b/package/kernel/linux/modules/netfilter.mk
index 86a5ffb5c5..da3e69e49a 100644
--- a/package/kernel/linux/modules/netfilter.mk
+++ b/package/kernel/linux/modules/netfilter.mk
@@ -197,7 +197,7 @@ $(eval $(call KernelPackage,nf-flow))
 define KernelPackage/nf-socket
   SUBMENU:=$(NF_MENU)
   TITLE:=Netfilter socket lookup support
-  KCONFIG:= $(KCOFNIG_NF_SOCKET)
+  KCONFIG:= $(KCONFIG_NF_SOCKET)
   FILES:=$(foreach mod,$(NF_SOCKET-m),$(LINUX_DIR)/net/$(mod).ko)
   AUTOLOAD:=$(call AutoProbe,$(notdir $(NF_SOCKET-m)))
 endef
@@ -208,7 +208,7 @@ $(eval $(call KernelPackage,nf-socket))
 define KernelPackage/nf-tproxy
   SUBMENU:=$(NF_MENU)
   TITLE:=Netfilter tproxy support
-  KCONFIG:= $(KCOFNIG_NF_TPROXY)
+  KCONFIG:= $(KCONFIG_NF_TPROXY)
   FILES:=$(foreach mod,$(NF_TPROXY-m),$(LINUX_DIR)/net/$(mod).ko)
   AUTOLOAD:=$(call AutoProbe,$(notdir $(NF_TPROXY-m)))
 endef

From 901af2718957fc878279073e9b917458144c75a4 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@nbd.name>
Date: Thu, 22 Jun 2023 19:37:13 +0200
Subject: [PATCH 15/17] mt76: update to the latest version

2c9c8ffe9d8c wifi: mt76: mt7615: fix possible race in mt7615_mac_sta_poll
3365c80f4202 wifi: mt76: connac: fix stats->tx_bytes calculation
b69d82130b47 wifi: mt76: connac: do not check WED status for non-mmio devices
1f9cd65b55d7 wifi: mt76: mt7921e: fix probe timeout after reboot
42dace9ce247 wifi: mt76: mt7921: Fix use-after-free in fw features query.
540adbb38205 wifi: mt76: mt7921: add Netgear AXE3000 (A8000) support
150e2d0ffc0c wifi: mt76: mt7996: fix possible NULL pointer dereference in mt7996_mac_write_txwi()
5b7519be2bf6 wifi: mt76: mt7996: fix endianness of MT_TXD6_TX_RATE
40f6e433f747 wifi: mt76: mt76x02: remove WEP support
84ea1a24f5b5 mt76: mt7921: don't assume adequate headroom for SDIO headers
5c28e17f8c78 wifi: mt76: mt7996: fix header translation logic
2386cec860fa wifi: mt76: mt7996: enable BSS_CHANGED_MU_GROUPS support
748d4a2bfebd wifi: mt76: mt7615: enable BSS_CHANGED_MU_GROUPS support
458ad0af21be wifi: mt76: enable UNII-4 channel 177 support
7fb046011293 wifi: mt76: mt7915: fix background radar event being blocked
d2a77a9954bb wifi: mt76: mt7915: report tx retries/failed counts for non-WED path
f76b102b09ca wifi: mt76: mt7915: rework tx packets counting when WED is active
5637d9e37d9e wifi: mt76: mt7915: rework tx bytes counting when WED is active
34bdc7fcb4c0 wifi: mt76: report non-binding skb tx rate when WED is active
d71aa7b992a3 wifi: mt76: mt7915: drop return in mt7915_sta_statistics
251c363c3087 wifi: mt76: mt7996: drop return in mt7996_sta_statistics
150bb95cb153 wifi: mt76: mt7921: do not support one stream on secondary antenna only
d480c3281f21 wifi: mt76: mt7921: remove macro duplication in regs.h
18b1027e5b6e wifi: mt76: mt7915: move mib_stats structure in mt76.h
25ec4b91020e wifi: mt76: mt7996: rely on mib_stats shared definition
6541afa88b3b wifi: mt76: mt7921: rely on mib_stats shared definition
eeb60eb9a5a0 wifi: mt76: mt7915: add support for MT7981 [sync with upstream]
d5b7e6a3d735 wifi: mt76: mt7921e: report tx retries/failed counts in tx free event
f0f19cea6646 wifi: mt76: mt7921: fix skb leak by txs missing in AMSDU
edd8a830f6e3 wifi: mt76: add tx_nss histogram to ethtool stats
e48235308b3e wifi: mt76: mt7915: accumulate mu-mimo ofdma muru stats
a729242363d9 wifi: mt76: mt7921: fix non-PSC channel scan fail
8d52436ee0cd wifi: mt76: mt7921: Support temp sensor
d152c8688c14 wifi: mt76: mt7915: disable WFDMA Tx/Rx during SER recovery
d07785c344ac wifi: mt76: mt7996: disable WFDMA Tx/Rx during SER recovery
2a19784137f9 wifi: mt76: mt7921: make mt7921_mac_sta_poll static
da8e33a15e71 wifi: mt76: mt7915: fix command timeout in AP stop period
cc58d5c4a9c9 mt76: mt7996: rely on mt76_sta_stats in mt76_wcid
98a37c82a373 wifi: mt76: mt7921: get rid of MT7921_RESET_TIMEOUT marco
ece724cf562b wifi: mt76: mt7996: move radio ctrl commands to proper functions
527cbbc5ede7 wifi: mt76: connac: add support for dsp firmware download
44e323340637 wifi: mt76: mt7996: fix bss wlan_idx when sending bss_info command
63f0053df07a wifi: mt76: mt7996: enable VHT extended NSS BW feature
e1bb4ef7b2bb wifi: mt76: connac: add support to set ifs time by mcu command
080ca19cc686 wifi: mt76: mt7996: use correct phy for background radar event
2c163f1812a3 wifi: mt76: mt7996: fix WA event ring size
b511a437ace4 wifi: mt76: mt7996: add muru support
ece67c98dc1c wifi: mt76: mt7996: increase tx token size
7c2515d85117 wifi: mt76: mt7921e: fix init command fail with enabled device
30706095c566 wifi: mt76: mt7915: move sta_poll_list and sta_poll_lock in mt76_dev
b06ed10ee271 wifi: mt76: mt7603: rely on shared sta_poll_list and sta_poll_lock
b59bdae339de wifi: mt76: mt7615: rely on shared sta_poll_list and sta_poll_lock
6da2e0e4ef54 wifi: mt76: mt7996: rely on shared sta_poll_list and sta_poll_lock
b19d3ad88e8b wifi: mt76: mt7921: rely on shared sta_poll_list and sta_poll_lock
595b033275a3 wifi: mt76: mt7915: move poll_list in mt76_wcid
16fcad171849 wifi: mt76: mt7603: rely on shared poll_list field
e19f84091d2e wifi: mt76: mt7615: rely on shared poll_list field
b87e4dad1e84 wifi: mt76: mt7996: rely on shared poll_list field
6d7950e258d0 wifi: mt76: mt7921: rely on shared poll_list field
f5c5eece5038 wifi: mt76: move ampdu_state in mt76_wcid
7e44467469fe mt76: connac: move more mt7921/mt7915 mac shared code in connac lib
39a70710ddcd wifi: mt76: move rate info in mt76_vif
0dc4326991df wifi: mt76: connac: move connac3 definitions in mt76_connac3_mac.h
29cfabbb4b90 wifi: mt76: connac: add connac3 mac library

Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 package/kernel/mt76/Makefile | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/package/kernel/mt76/Makefile b/package/kernel/mt76/Makefile
index 04db7fe32c..11a4c5ba87 100644
--- a/package/kernel/mt76/Makefile
+++ b/package/kernel/mt76/Makefile
@@ -8,9 +8,9 @@ PKG_LICENSE_FILES:=
 
 PKG_SOURCE_URL:=https://github.com/openwrt/mt76
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2023-05-13
-PKG_SOURCE_VERSION:=969b7b5ebd129068ca56e4b0d831593a2f92382f
-PKG_MIRROR_HASH:=d28869591d1cb9a967b72f5cd8215c7b2c3388b7b31147b7b18c797018ab8ffb
+PKG_SOURCE_DATE:=2023-06-22
+PKG_SOURCE_VERSION:=29cfabbb4b9076aca2a5b5124729a2a9c391905c
+PKG_MIRROR_HASH:=4b696f473fa784c5cc14ea964a0942e7263022e078e2929db650b458b576f1ce
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 PKG_USE_NINJA:=0
@@ -266,7 +266,7 @@ define KernelPackage/mt7921-common
   $(KernelPackage/mt76-default)
   TITLE:=MediaTek MT7615 wireless driver common code
   HIDDEN:=1
-  DEPENDS+=+kmod-mt76-connac +kmod-mt7921-firmware +@DRIVER_11AX_SUPPORT
+  DEPENDS+=+kmod-mt76-connac +kmod-mt7921-firmware +@DRIVER_11AX_SUPPORT +kmod-hwmon-core
   FILES:= $(PKG_BUILD_DIR)/mt7921/mt7921-common.ko
 endef
 

From 1f5fce27c195373fedcf233a48470de97752058f Mon Sep 17 00:00:00 2001
From: John Audia <therealgraysky@proton.me>
Date: Wed, 21 Jun 2023 12:17:06 -0400
Subject: [PATCH 16/17] kernel: bump 5.15 to 5.15.118

All patches automatically rebased.

Build system: x86_64
Build-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod

Signed-off-by: John Audia <therealgraysky@proton.me>
---
 include/kernel-5.15                                         | 4 ++--
 target/linux/ath25/patches-5.15/107-ar5312_gpio.patch       | 2 +-
 .../patches-5.15/0032-MIPS-ath79-sanitize-symbols.patch     | 2 +-
 .../ath79/patches-5.15/910-unaligned_access_hacks.patch     | 2 +-
 .../322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch             | 2 +-
 .../patches-5.15/202-mips-bmips-tweak-Kconfig-options.patch | 2 +-
 .../bmips/patches-5.15/600-mips-bmips-add-pci-support.patch | 2 +-
 .../600-v5.18-page_pool-Add-allocation-stats.patch          | 2 +-
 ...707-v6.3-net-pcs-add-driver-for-MediaTek-SGMII-PCS.patch | 2 +-
 ...0011-net-dsa-mt7530-introduce-separate-MDIO-driver.patch | 2 +-
 ...t-dsa-mt7530-introduce-driver-for-MT7988-built-in-.patch | 2 +-
 ...y-Add-driver-for-Motorcomm-yt8521-gigabit-ethernet.patch | 2 +-
 ...-0009-nvmem-Add-driver-for-OCOTP-in-Sunplus-SP7021.patch | 2 +-
 .../806-v6.0-0001-nvmem-microchip-otpc-add-support.patch    | 2 +-
 ...-v5.17-net-qmi_wwan-add-ZTE-MF286D-modem-19d2-1485.patch | 2 +-
 target/linux/generic/hack-5.15/251-kconfig.patch            | 2 +-
 target/linux/generic/hack-5.15/280-rfkill-stubs.patch       | 2 +-
 .../generic/hack-5.15/721-net-add-packet-mangeling.patch    | 6 +++---
 .../hack-5.15/780-usb-net-MeigLink_modem_support.patch      | 2 +-
 .../generic/pending-5.15/300-mips_expose_boot_raw.patch     | 4 ++--
 .../680-NET-skip-GRO-for-foreign-MAC-addresses.patch        | 2 +-
 ...t-core-add-optional-threading-for-backlog-processi.patch | 6 +++---
 target/linux/lantiq/patches-5.15/0152-lantiq-VPE.patch      | 2 +-
 .../patches-5.15/701-staging-add-fsl_ppfe-driver.patch      | 2 +-
 ...t-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch | 2 +-
 ...INTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch | 2 +-
 .../octeon/patches-5.15/100-mips_image_cmdline_hack.patch   | 2 +-
 .../314-MIPS-add-bootargs-override-property.patch           | 4 ++--
 .../patches-5.15/315-owrt-hack-fix-mt7688-cache-issue.patch | 4 ++--
 .../008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch | 2 +-
 .../patches-5.15/300-mips-add-rtl838x-platform.patch        | 2 +-
 31 files changed, 39 insertions(+), 39 deletions(-)

diff --git a/include/kernel-5.15 b/include/kernel-5.15
index fc637450b5..aa4541d277 100644
--- a/include/kernel-5.15
+++ b/include/kernel-5.15
@@ -1,2 +1,2 @@
-LINUX_VERSION-5.15 = .117
-LINUX_KERNEL_HASH-5.15.117 = a9a8331f3c0e004b40a41f30d688b53bf85405597ac41c2c89be7f4fbcf7239f
+LINUX_VERSION-5.15 = .118
+LINUX_KERNEL_HASH-5.15.118 = 4e6bf4dadb04d5d11d1d4cc37c0eabcf33bc333b7dd3dc2143c3099a823eb5b3
diff --git a/target/linux/ath25/patches-5.15/107-ar5312_gpio.patch b/target/linux/ath25/patches-5.15/107-ar5312_gpio.patch
index 4ad1d40fac..e6e1290d35 100644
--- a/target/linux/ath25/patches-5.15/107-ar5312_gpio.patch
+++ b/target/linux/ath25/patches-5.15/107-ar5312_gpio.patch
@@ -202,7 +202,7 @@
 +subsys_initcall(ar5312_gpio_init);
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -230,6 +230,7 @@ config ATH25
+@@ -231,6 +231,7 @@ config ATH25
  	select CEVT_R4K
  	select CSRC_R4K
  	select DMA_NONCOHERENT
diff --git a/target/linux/ath79/patches-5.15/0032-MIPS-ath79-sanitize-symbols.patch b/target/linux/ath79/patches-5.15/0032-MIPS-ath79-sanitize-symbols.patch
index 9bce3a2633..9d014434ec 100644
--- a/target/linux/ath79/patches-5.15/0032-MIPS-ath79-sanitize-symbols.patch
+++ b/target/linux/ath79/patches-5.15/0032-MIPS-ath79-sanitize-symbols.patch
@@ -15,7 +15,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
 
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -256,6 +256,8 @@ config ATH79
+@@ -257,6 +257,8 @@ config ATH79
  	select SYS_SUPPORTS_BIG_ENDIAN
  	select SYS_SUPPORTS_MIPS16
  	select SYS_SUPPORTS_ZBOOT_UART_PROM
diff --git a/target/linux/ath79/patches-5.15/910-unaligned_access_hacks.patch b/target/linux/ath79/patches-5.15/910-unaligned_access_hacks.patch
index c2b646643e..ad685fb13b 100644
--- a/target/linux/ath79/patches-5.15/910-unaligned_access_hacks.patch
+++ b/target/linux/ath79/patches-5.15/910-unaligned_access_hacks.patch
@@ -784,7 +784,7 @@ SVN-Revision: 35130
  
 --- a/include/net/neighbour.h
 +++ b/include/net/neighbour.h
-@@ -275,8 +275,10 @@ static inline bool neigh_key_eq128(const
+@@ -270,8 +270,10 @@ static inline bool neigh_key_eq128(const
  	const u32 *n32 = (const u32 *)n->primary_key;
  	const u32 *p32 = pkey;
  
diff --git a/target/linux/bcm63xx/patches-5.15/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch b/target/linux/bcm63xx/patches-5.15/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch
index a848165ac5..aff3f4a1a0 100644
--- a/target/linux/bcm63xx/patches-5.15/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch
+++ b/target/linux/bcm63xx/patches-5.15/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch
@@ -14,7 +14,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
 
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -331,6 +331,9 @@ config BCM63XX
+@@ -332,6 +332,9 @@ config BCM63XX
  	select SYNC_R4K
  	select DMA_NONCOHERENT
  	select IRQ_MIPS_CPU
diff --git a/target/linux/bmips/patches-5.15/202-mips-bmips-tweak-Kconfig-options.patch b/target/linux/bmips/patches-5.15/202-mips-bmips-tweak-Kconfig-options.patch
index c39df850a0..eb3f1c1d5c 100644
--- a/target/linux/bmips/patches-5.15/202-mips-bmips-tweak-Kconfig-options.patch
+++ b/target/linux/bmips/patches-5.15/202-mips-bmips-tweak-Kconfig-options.patch
@@ -13,7 +13,7 @@ Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -274,25 +274,20 @@ config BMIPS_GENERIC
+@@ -275,25 +275,20 @@ config BMIPS_GENERIC
  	select SYNC_R4K
  	select COMMON_CLK
  	select BCM6345_L1_IRQ
diff --git a/target/linux/bmips/patches-5.15/600-mips-bmips-add-pci-support.patch b/target/linux/bmips/patches-5.15/600-mips-bmips-add-pci-support.patch
index 36b09105b7..e2ca75a393 100644
--- a/target/linux/bmips/patches-5.15/600-mips-bmips-add-pci-support.patch
+++ b/target/linux/bmips/patches-5.15/600-mips-bmips-add-pci-support.patch
@@ -14,7 +14,7 @@ Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -274,6 +274,7 @@ config BMIPS_GENERIC
+@@ -275,6 +275,7 @@ config BMIPS_GENERIC
  	select SYNC_R4K
  	select COMMON_CLK
  	select BCM6345_L1_IRQ
diff --git a/target/linux/generic/backport-5.15/600-v5.18-page_pool-Add-allocation-stats.patch b/target/linux/generic/backport-5.15/600-v5.18-page_pool-Add-allocation-stats.patch
index f4c5b9afee..dca1062be9 100644
--- a/target/linux/generic/backport-5.15/600-v5.18-page_pool-Add-allocation-stats.patch
+++ b/target/linux/generic/backport-5.15/600-v5.18-page_pool-Add-allocation-stats.patch
@@ -65,7 +65,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
  struct page *page_pool_alloc_pages(struct page_pool *pool, gfp_t gfp);
 --- a/net/Kconfig
 +++ b/net/Kconfig
-@@ -434,6 +434,19 @@ config NET_DEVLINK
+@@ -432,6 +432,19 @@ config NET_DEVLINK
  config PAGE_POOL
  	bool
  
diff --git a/target/linux/generic/backport-5.15/707-v6.3-net-pcs-add-driver-for-MediaTek-SGMII-PCS.patch b/target/linux/generic/backport-5.15/707-v6.3-net-pcs-add-driver-for-MediaTek-SGMII-PCS.patch
index 9743a3f206..3668a821ef 100644
--- a/target/linux/generic/backport-5.15/707-v6.3-net-pcs-add-driver-for-MediaTek-SGMII-PCS.patch
+++ b/target/linux/generic/backport-5.15/707-v6.3-net-pcs-add-driver-for-MediaTek-SGMII-PCS.patch
@@ -32,7 +32,7 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -11789,6 +11789,14 @@ L:	netdev@vger.kernel.org
+@@ -11782,6 +11782,14 @@ L:	netdev@vger.kernel.org
  S:	Maintained
  F:	drivers/net/ethernet/mediatek/
  
diff --git a/target/linux/generic/backport-5.15/790-v6.4-0011-net-dsa-mt7530-introduce-separate-MDIO-driver.patch b/target/linux/generic/backport-5.15/790-v6.4-0011-net-dsa-mt7530-introduce-separate-MDIO-driver.patch
index 51346d0620..d5ba5dbf66 100644
--- a/target/linux/generic/backport-5.15/790-v6.4-0011-net-dsa-mt7530-introduce-separate-MDIO-driver.patch
+++ b/target/linux/generic/backport-5.15/790-v6.4-0011-net-dsa-mt7530-introduce-separate-MDIO-driver.patch
@@ -25,7 +25,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -11901,6 +11901,7 @@ M:	Landen Chao <Landen.Chao@mediatek.com
+@@ -11894,6 +11894,7 @@ M:	Landen Chao <Landen.Chao@mediatek.com
  M:	DENG Qingfang <dqfext@gmail.com>
  L:	netdev@vger.kernel.org
  S:	Maintained
diff --git a/target/linux/generic/backport-5.15/790-v6.4-0013-net-dsa-mt7530-introduce-driver-for-MT7988-built-in-.patch b/target/linux/generic/backport-5.15/790-v6.4-0013-net-dsa-mt7530-introduce-driver-for-MT7988-built-in-.patch
index 00f4b25c44..b748fb5f8f 100644
--- a/target/linux/generic/backport-5.15/790-v6.4-0013-net-dsa-mt7530-introduce-driver-for-MT7988-built-in-.patch
+++ b/target/linux/generic/backport-5.15/790-v6.4-0013-net-dsa-mt7530-introduce-driver-for-MT7988-built-in-.patch
@@ -28,7 +28,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -11899,9 +11899,11 @@ MEDIATEK SWITCH DRIVER
+@@ -11892,9 +11892,11 @@ MEDIATEK SWITCH DRIVER
  M:	Sean Wang <sean.wang@mediatek.com>
  M:	Landen Chao <Landen.Chao@mediatek.com>
  M:	DENG Qingfang <dqfext@gmail.com>
diff --git a/target/linux/generic/backport-5.15/791-v6.2-01-net-phy-Add-driver-for-Motorcomm-yt8521-gigabit-ethernet.patch b/target/linux/generic/backport-5.15/791-v6.2-01-net-phy-Add-driver-for-Motorcomm-yt8521-gigabit-ethernet.patch
index e2a0e25a79..eb51b410b5 100644
--- a/target/linux/generic/backport-5.15/791-v6.2-01-net-phy-Add-driver-for-Motorcomm-yt8521-gigabit-ethernet.patch
+++ b/target/linux/generic/backport-5.15/791-v6.2-01-net-phy-Add-driver-for-Motorcomm-yt8521-gigabit-ethernet.patch
@@ -21,7 +21,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -12700,6 +12700,7 @@ F:	include/uapi/linux/meye.h
+@@ -12693,6 +12693,7 @@ F:	include/uapi/linux/meye.h
  
  MOTORCOMM PHY DRIVER
  M:	Peter Geis <pgwipeout@gmail.com>
diff --git a/target/linux/generic/backport-5.15/804-v5.18-0009-nvmem-Add-driver-for-OCOTP-in-Sunplus-SP7021.patch b/target/linux/generic/backport-5.15/804-v5.18-0009-nvmem-Add-driver-for-OCOTP-in-Sunplus-SP7021.patch
index ae177e0cb0..6ad9257d60 100644
--- a/target/linux/generic/backport-5.15/804-v5.18-0009-nvmem-Add-driver-for-OCOTP-in-Sunplus-SP7021.patch
+++ b/target/linux/generic/backport-5.15/804-v5.18-0009-nvmem-Add-driver-for-OCOTP-in-Sunplus-SP7021.patch
@@ -19,7 +19,7 @@ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -17965,6 +17965,11 @@ L:	netdev@vger.kernel.org
+@@ -17958,6 +17958,11 @@ L:	netdev@vger.kernel.org
  S:	Maintained
  F:	drivers/net/ethernet/dlink/sundance.c
  
diff --git a/target/linux/generic/backport-5.15/806-v6.0-0001-nvmem-microchip-otpc-add-support.patch b/target/linux/generic/backport-5.15/806-v6.0-0001-nvmem-microchip-otpc-add-support.patch
index ad0460d4f3..f7ea61626c 100644
--- a/target/linux/generic/backport-5.15/806-v6.0-0001-nvmem-microchip-otpc-add-support.patch
+++ b/target/linux/generic/backport-5.15/806-v6.0-0001-nvmem-microchip-otpc-add-support.patch
@@ -57,7 +57,7 @@ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -12364,6 +12364,14 @@ S:	Supported
+@@ -12357,6 +12357,14 @@ S:	Supported
  F:	Documentation/devicetree/bindings/mtd/atmel-nand.txt
  F:	drivers/mtd/nand/raw/atmel/*
  
diff --git a/target/linux/generic/backport-5.15/810-v5.17-net-qmi_wwan-add-ZTE-MF286D-modem-19d2-1485.patch b/target/linux/generic/backport-5.15/810-v5.17-net-qmi_wwan-add-ZTE-MF286D-modem-19d2-1485.patch
index 25802be7e3..41d3e121de 100644
--- a/target/linux/generic/backport-5.15/810-v5.17-net-qmi_wwan-add-ZTE-MF286D-modem-19d2-1485.patch
+++ b/target/linux/generic/backport-5.15/810-v5.17-net-qmi_wwan-add-ZTE-MF286D-modem-19d2-1485.patch
@@ -49,7 +49,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
 
 --- a/drivers/net/usb/qmi_wwan.c
 +++ b/drivers/net/usb/qmi_wwan.c
-@@ -1314,6 +1314,7 @@ static const struct usb_device_id produc
+@@ -1316,6 +1316,7 @@ static const struct usb_device_id produc
  	{QMI_FIXED_INTF(0x19d2, 0x1426, 2)},	/* ZTE MF91 */
  	{QMI_FIXED_INTF(0x19d2, 0x1428, 2)},	/* Telewell TW-LTE 4G v2 */
  	{QMI_FIXED_INTF(0x19d2, 0x1432, 3)},	/* ZTE ME3620 */
diff --git a/target/linux/generic/hack-5.15/251-kconfig.patch b/target/linux/generic/hack-5.15/251-kconfig.patch
index 0e24c3e804..9350e366d8 100644
--- a/target/linux/generic/hack-5.15/251-kconfig.patch
+++ b/target/linux/generic/hack-5.15/251-kconfig.patch
@@ -199,7 +199,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
  	bool
 --- a/net/Kconfig
 +++ b/net/Kconfig
-@@ -432,7 +432,7 @@ config NET_DEVLINK
+@@ -430,7 +430,7 @@ config NET_DEVLINK
  	default n
  
  config PAGE_POOL
diff --git a/target/linux/generic/hack-5.15/280-rfkill-stubs.patch b/target/linux/generic/hack-5.15/280-rfkill-stubs.patch
index 7a650d132e..ff6638f7a0 100644
--- a/target/linux/generic/hack-5.15/280-rfkill-stubs.patch
+++ b/target/linux/generic/hack-5.15/280-rfkill-stubs.patch
@@ -26,7 +26,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
   * @name: name of the struct -- the string is not copied internally
 --- a/net/Makefile
 +++ b/net/Makefile
-@@ -52,7 +52,7 @@ obj-$(CONFIG_TIPC)		+= tipc/
+@@ -51,7 +51,7 @@ obj-$(CONFIG_TIPC)		+= tipc/
  obj-$(CONFIG_NETLABEL)		+= netlabel/
  obj-$(CONFIG_IUCV)		+= iucv/
  obj-$(CONFIG_SMC)		+= smc/
diff --git a/target/linux/generic/hack-5.15/721-net-add-packet-mangeling.patch b/target/linux/generic/hack-5.15/721-net-add-packet-mangeling.patch
index b4e92b4a18..69771cef39 100644
--- a/target/linux/generic/hack-5.15/721-net-add-packet-mangeling.patch
+++ b/target/linux/generic/hack-5.15/721-net-add-packet-mangeling.patch
@@ -38,7 +38,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  
  /* Specifies the type of the struct net_device::ml_priv pointer */
  enum netdev_ml_priv_type {
-@@ -2015,6 +2020,7 @@ struct net_device {
+@@ -2014,6 +2019,7 @@ struct net_device {
  	/* Read-mostly cache-line for fast-path access */
  	unsigned int		flags;
  	unsigned int		priv_flags;
@@ -46,7 +46,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	const struct net_device_ops *netdev_ops;
  	int			ifindex;
  	unsigned short		gflags;
-@@ -2075,6 +2081,11 @@ struct net_device {
+@@ -2074,6 +2080,11 @@ struct net_device {
  	const struct tlsdev_ops *tlsdev_ops;
  #endif
  
@@ -58,7 +58,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	const struct header_ops *header_ops;
  
  	unsigned char		operstate;
-@@ -2149,6 +2160,10 @@ struct net_device {
+@@ -2145,6 +2156,10 @@ struct net_device {
  	struct mctp_dev __rcu	*mctp_ptr;
  #endif
  
diff --git a/target/linux/generic/hack-5.15/780-usb-net-MeigLink_modem_support.patch b/target/linux/generic/hack-5.15/780-usb-net-MeigLink_modem_support.patch
index 367d66fc66..96d800669a 100644
--- a/target/linux/generic/hack-5.15/780-usb-net-MeigLink_modem_support.patch
+++ b/target/linux/generic/hack-5.15/780-usb-net-MeigLink_modem_support.patch
@@ -29,7 +29,7 @@ Subject: [PATCH] net/usb/qmi_wwan: add MeigLink modem support
  
  #define QUECTEL_VENDOR_ID			0x2c7c
  /* These Quectel products use Quectel's vendor ID */
-@@ -1169,6 +1171,11 @@ static const struct usb_device_id option
+@@ -1173,6 +1175,11 @@ static const struct usb_device_id option
  	  .driver_info = ZLP },
  	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96),
  	  .driver_info = RSVD(4) },
diff --git a/target/linux/generic/pending-5.15/300-mips_expose_boot_raw.patch b/target/linux/generic/pending-5.15/300-mips_expose_boot_raw.patch
index 05d024925d..436c2cc767 100644
--- a/target/linux/generic/pending-5.15/300-mips_expose_boot_raw.patch
+++ b/target/linux/generic/pending-5.15/300-mips_expose_boot_raw.patch
@@ -9,7 +9,7 @@ Acked-by: Rob Landley <rob@landley.net>
 ---
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -1100,9 +1100,6 @@ config FW_ARC
+@@ -1101,9 +1101,6 @@ config FW_ARC
  config ARCH_MAY_HAVE_PC_FDC
  	bool
  
@@ -19,7 +19,7 @@ Acked-by: Rob Landley <rob@landley.net>
  config CEVT_BCM1480
  	bool
  
-@@ -3182,6 +3179,18 @@ choice
+@@ -3183,6 +3180,18 @@ choice
  		bool "Extend builtin kernel arguments with bootloader arguments"
  endchoice
  
diff --git a/target/linux/generic/pending-5.15/680-NET-skip-GRO-for-foreign-MAC-addresses.patch b/target/linux/generic/pending-5.15/680-NET-skip-GRO-for-foreign-MAC-addresses.patch
index 4ccf229026..f01348d349 100644
--- a/target/linux/generic/pending-5.15/680-NET-skip-GRO-for-foreign-MAC-addresses.patch
+++ b/target/linux/generic/pending-5.15/680-NET-skip-GRO-for-foreign-MAC-addresses.patch
@@ -11,7 +11,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 
 --- a/include/linux/netdevice.h
 +++ b/include/linux/netdevice.h
-@@ -2101,6 +2101,8 @@ struct net_device {
+@@ -2100,6 +2100,8 @@ struct net_device {
  	struct netdev_hw_addr_list	mc;
  	struct netdev_hw_addr_list	dev_addrs;
  
diff --git a/target/linux/generic/pending-5.15/760-net-core-add-optional-threading-for-backlog-processi.patch b/target/linux/generic/pending-5.15/760-net-core-add-optional-threading-for-backlog-processi.patch
index d846a05a24..1ccdea6d99 100644
--- a/target/linux/generic/pending-5.15/760-net-core-add-optional-threading-for-backlog-processi.patch
+++ b/target/linux/generic/pending-5.15/760-net-core-add-optional-threading-for-backlog-processi.patch
@@ -20,7 +20,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  
  /**
   *	napi_disable - prevent NAPI from scheduling
-@@ -3368,6 +3369,7 @@ struct softnet_data {
+@@ -3364,6 +3365,7 @@ struct softnet_data {
  	unsigned int		processed;
  	unsigned int		time_squeeze;
  	unsigned int		received_rps;
@@ -162,7 +162,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  void netif_napi_add(struct net_device *dev, struct napi_struct *napi,
  		    int (*poll)(struct napi_struct *, int), int weight)
  {
-@@ -11371,6 +11446,9 @@ static int dev_cpu_dead(unsigned int old
+@@ -11369,6 +11444,9 @@ static int dev_cpu_dead(unsigned int old
  	raise_softirq_irqoff(NET_TX_SOFTIRQ);
  	local_irq_enable();
  
@@ -172,7 +172,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  #ifdef CONFIG_RPS
  	remsd = oldsd->rps_ipi_list;
  	oldsd->rps_ipi_list = NULL;
-@@ -11710,6 +11788,7 @@ static int __init net_dev_init(void)
+@@ -11708,6 +11786,7 @@ static int __init net_dev_init(void)
  		sd->cpu = i;
  #endif
  
diff --git a/target/linux/lantiq/patches-5.15/0152-lantiq-VPE.patch b/target/linux/lantiq/patches-5.15/0152-lantiq-VPE.patch
index bf2962a3ff..6776d35ece 100644
--- a/target/linux/lantiq/patches-5.15/0152-lantiq-VPE.patch
+++ b/target/linux/lantiq/patches-5.15/0152-lantiq-VPE.patch
@@ -15,7 +15,7 @@ Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
 
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -2429,6 +2429,12 @@ config MIPS_VPE_LOADER
+@@ -2430,6 +2430,12 @@ config MIPS_VPE_LOADER
  	  Includes a loader for loading an elf relocatable object
  	  onto another VPE and running it.
  
diff --git a/target/linux/layerscape/patches-5.15/701-staging-add-fsl_ppfe-driver.patch b/target/linux/layerscape/patches-5.15/701-staging-add-fsl_ppfe-driver.patch
index 6130bf0030..e8a6915350 100644
--- a/target/linux/layerscape/patches-5.15/701-staging-add-fsl_ppfe-driver.patch
+++ b/target/linux/layerscape/patches-5.15/701-staging-add-fsl_ppfe-driver.patch
@@ -854,7 +854,7 @@ Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
 +};
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -7526,6 +7526,14 @@ F:	drivers/ptp/ptp_qoriq.c
+@@ -7519,6 +7519,14 @@ F:	drivers/ptp/ptp_qoriq.c
  F:	drivers/ptp/ptp_qoriq_debugfs.c
  F:	include/linux/fsl/ptp_qoriq.h
  
diff --git a/target/linux/mediatek/patches-5.15/730-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch b/target/linux/mediatek/patches-5.15/730-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch
index 6af9e84335..43876deb66 100644
--- a/target/linux/mediatek/patches-5.15/730-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch
+++ b/target/linux/mediatek/patches-5.15/730-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch
@@ -21,7 +21,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -11797,6 +11797,15 @@ S:	Maintained
+@@ -11790,6 +11790,15 @@ S:	Maintained
  F:	drivers/net/pcs/pcs-mtk-lynxi.c
  F:	include/linux/pcs/pcs-mtk-lynxi.h
  
diff --git a/target/linux/mvebu/patches-5.15/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch b/target/linux/mvebu/patches-5.15/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch
index b8accf180b..242a6c1e00 100644
--- a/target/linux/mvebu/patches-5.15/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch
+++ b/target/linux/mvebu/patches-5.15/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch
@@ -16,7 +16,7 @@ Cc: Robert Marko <robert.marko@sartura.hr>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -9063,6 +9063,22 @@ F:	include/net/nl802154.h
+@@ -9056,6 +9056,22 @@ F:	include/net/nl802154.h
  F:	net/ieee802154/
  F:	net/mac802154/
  
diff --git a/target/linux/octeon/patches-5.15/100-mips_image_cmdline_hack.patch b/target/linux/octeon/patches-5.15/100-mips_image_cmdline_hack.patch
index 15e233aceb..4b225277f9 100644
--- a/target/linux/octeon/patches-5.15/100-mips_image_cmdline_hack.patch
+++ b/target/linux/octeon/patches-5.15/100-mips_image_cmdline_hack.patch
@@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -1180,6 +1180,10 @@ config MIPS_MSC
+@@ -1181,6 +1181,10 @@ config MIPS_MSC
  config SYNC_R4K
  	bool
  
diff --git a/target/linux/ramips/patches-5.15/314-MIPS-add-bootargs-override-property.patch b/target/linux/ramips/patches-5.15/314-MIPS-add-bootargs-override-property.patch
index 07635a9d86..ef45aac61b 100644
--- a/target/linux/ramips/patches-5.15/314-MIPS-add-bootargs-override-property.patch
+++ b/target/linux/ramips/patches-5.15/314-MIPS-add-bootargs-override-property.patch
@@ -17,7 +17,7 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
 
 --- a/arch/mips/kernel/setup.c
 +++ b/arch/mips/kernel/setup.c
-@@ -544,8 +544,28 @@ static int __init bootcmdline_scan_chose
+@@ -545,8 +545,28 @@ static int __init bootcmdline_scan_chose
  
  #endif /* CONFIG_OF_EARLY_FLATTREE */
  
@@ -46,7 +46,7 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
  	bool dt_bootargs = false;
  
  	/*
-@@ -559,6 +579,14 @@ static void __init bootcmdline_init(void
+@@ -560,6 +580,14 @@ static void __init bootcmdline_init(void
  	}
  
  	/*
diff --git a/target/linux/ramips/patches-5.15/315-owrt-hack-fix-mt7688-cache-issue.patch b/target/linux/ramips/patches-5.15/315-owrt-hack-fix-mt7688-cache-issue.patch
index f36f028cab..d49429f7a3 100644
--- a/target/linux/ramips/patches-5.15/315-owrt-hack-fix-mt7688-cache-issue.patch
+++ b/target/linux/ramips/patches-5.15/315-owrt-hack-fix-mt7688-cache-issue.patch
@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 
 --- a/arch/mips/kernel/setup.c
 +++ b/arch/mips/kernel/setup.c
-@@ -686,7 +686,6 @@ static void __init arch_mem_init(char **
+@@ -687,7 +687,6 @@ static void __init arch_mem_init(char **
  	mips_reserve_vmcore();
  
  	mips_parse_crashkernel();
@@ -18,7 +18,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  	/*
  	 * In order to reduce the possibility of kernel panic when failed to
-@@ -803,6 +802,7 @@ void __init setup_arch(char **cmdline_p)
+@@ -804,6 +803,7 @@ void __init setup_arch(char **cmdline_p)
  
  	cpu_cache_init();
  	paging_init();
diff --git a/target/linux/realtek/patches-5.15/008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch b/target/linux/realtek/patches-5.15/008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch
index 17ff729f52..dfe7ab28d7 100644
--- a/target/linux/realtek/patches-5.15/008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch
+++ b/target/linux/realtek/patches-5.15/008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch
@@ -32,7 +32,7 @@ Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -15902,6 +15902,13 @@ S:	Maintained
+@@ -15895,6 +15895,13 @@ S:	Maintained
  F:	include/sound/rt*.h
  F:	sound/soc/codecs/rt*
  
diff --git a/target/linux/realtek/patches-5.15/300-mips-add-rtl838x-platform.patch b/target/linux/realtek/patches-5.15/300-mips-add-rtl838x-platform.patch
index 6407a49fb6..f853ef4fee 100644
--- a/target/linux/realtek/patches-5.15/300-mips-add-rtl838x-platform.patch
+++ b/target/linux/realtek/patches-5.15/300-mips-add-rtl838x-platform.patch
@@ -25,7 +25,7 @@ Submitted-by: Birger Koblitz <git@birger-koblitz.de>
  platform-$(CONFIG_SGI_IP28)		+= sgi-ip22/
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -1053,8 +1053,58 @@ config NLM_XLP_BOARD
+@@ -1054,8 +1054,58 @@ config NLM_XLP_BOARD
  	  This board is based on Netlogic XLP Processor.
  	  Say Y here if you have a XLP based board.
  

From e0fb38f4eeed6cd56d4b5178aeb91442b4fe92a5 Mon Sep 17 00:00:00 2001
From: John Audia <therealgraysky@proton.me>
Date: Wed, 21 Jun 2023 11:19:45 -0400
Subject: [PATCH 17/17] kernel: bump 6.1 to 6.1.35

All patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B
Run-tested: bcm2711/RPi4B

Signed-off-by: John Audia <therealgraysky@proton.me>
---
 include/kernel-6.1                                          | 4 ++--
 .../950-0084-cgroup-Disable-cgroup-memory-by-default.patch  | 6 +++---
 .../950-0238-zswap-Defer-zswap-initialisation.patch         | 4 ++--
 .../patches-6.1/202-mips-bmips-tweak-Kconfig-options.patch  | 4 ++--
 .../bmips/patches-6.1/600-mips-bmips-add-pci-support.patch  | 2 +-
 .../hack-6.1/780-usb-net-MeigLink_modem_support.patch       | 2 +-
 .../generic/pending-6.1/300-mips_expose_boot_raw.patch      | 4 ++--
 7 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/include/kernel-6.1 b/include/kernel-6.1
index 96a1eadb2a..bc84e23dad 100644
--- a/include/kernel-6.1
+++ b/include/kernel-6.1
@@ -1,2 +1,2 @@
-LINUX_VERSION-6.1 = .34
-LINUX_KERNEL_HASH-6.1.34 = b26f7cbcbf8031efc49f11f236f372fc34a4fd5fc6ad3151b893d1aa038ed603
\ No newline at end of file
+LINUX_VERSION-6.1 = .35
+LINUX_KERNEL_HASH-6.1.35 = be368143bc5d0dc73dd3e8c6191630c1620520379baf6f47c16116b2c0bc26ac
\ No newline at end of file
diff --git a/target/linux/bcm27xx/patches-6.1/950-0084-cgroup-Disable-cgroup-memory-by-default.patch b/target/linux/bcm27xx/patches-6.1/950-0084-cgroup-Disable-cgroup-memory-by-default.patch
index 77419cbc4b..d437cccb3c 100644
--- a/target/linux/bcm27xx/patches-6.1/950-0084-cgroup-Disable-cgroup-memory-by-default.patch
+++ b/target/linux/bcm27xx/patches-6.1/950-0084-cgroup-Disable-cgroup-memory-by-default.patch
@@ -29,7 +29,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
   *
 @@ -6079,6 +6082,12 @@ int __init cgroup_init(void)
  
- 	mutex_unlock(&cgroup_mutex);
+ 	cgroup_unlock();
  
 +	/*
 +	 * Apply an implicit disable, knowing that an explicit enable will
@@ -40,7 +40,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  	for_each_subsys(ss, ssid) {
  		if (ss->early_init) {
  			struct cgroup_subsys_state *css =
-@@ -6717,6 +6726,10 @@ static int __init cgroup_disable(char *s
+@@ -6716,6 +6725,10 @@ static int __init cgroup_disable(char *s
  			    strcmp(token, ss->legacy_name))
  				continue;
  
@@ -51,7 +51,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  			static_branch_disable(cgroup_subsys_enabled_key[i]);
  			pr_info("Disabling %s control group subsystem\n",
  				ss->name);
-@@ -6735,6 +6748,31 @@ static int __init cgroup_disable(char *s
+@@ -6734,6 +6747,31 @@ static int __init cgroup_disable(char *s
  }
  __setup("cgroup_disable=", cgroup_disable);
  
diff --git a/target/linux/bcm27xx/patches-6.1/950-0238-zswap-Defer-zswap-initialisation.patch b/target/linux/bcm27xx/patches-6.1/950-0238-zswap-Defer-zswap-initialisation.patch
index eccee8dd36..845b3466de 100644
--- a/target/linux/bcm27xx/patches-6.1/950-0238-zswap-Defer-zswap-initialisation.patch
+++ b/target/linux/bcm27xx/patches-6.1/950-0238-zswap-Defer-zswap-initialisation.patch
@@ -80,7 +80,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
  }
  
  /*********************************
-@@ -1489,7 +1505,6 @@ static int __init zswap_debugfs_init(voi
+@@ -1496,7 +1512,6 @@ static int __init zswap_debugfs_init(voi
  **********************************/
  static int __init init_zswap(void)
  {
@@ -88,7 +88,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
  	int ret;
  
  	zswap_init_started = true;
-@@ -1513,33 +1528,23 @@ static int __init init_zswap(void)
+@@ -1520,33 +1535,23 @@ static int __init init_zswap(void)
  	if (ret)
  		goto hp_fail;
  
diff --git a/target/linux/bmips/patches-6.1/202-mips-bmips-tweak-Kconfig-options.patch b/target/linux/bmips/patches-6.1/202-mips-bmips-tweak-Kconfig-options.patch
index e85056aee7..1c4a478148 100644
--- a/target/linux/bmips/patches-6.1/202-mips-bmips-tweak-Kconfig-options.patch
+++ b/target/linux/bmips/patches-6.1/202-mips-bmips-tweak-Kconfig-options.patch
@@ -13,7 +13,7 @@ Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -272,19 +272,13 @@ config BMIPS_GENERIC
+@@ -273,19 +273,13 @@ config BMIPS_GENERIC
  	select SYNC_R4K
  	select COMMON_CLK
  	select BCM6345_L1_IRQ
@@ -33,7 +33,7 @@ Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
  	select SWAP_IO_SPACE
  	select USB_EHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
  	select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
-@@ -294,6 +288,7 @@ config BMIPS_GENERIC
+@@ -295,6 +289,7 @@ config BMIPS_GENERIC
  	select HAVE_PCI
  	select PCI_DRIVERS_GENERIC
  	select FW_CFE
diff --git a/target/linux/bmips/patches-6.1/600-mips-bmips-add-pci-support.patch b/target/linux/bmips/patches-6.1/600-mips-bmips-add-pci-support.patch
index f28dda908d..66e8db4d01 100644
--- a/target/linux/bmips/patches-6.1/600-mips-bmips-add-pci-support.patch
+++ b/target/linux/bmips/patches-6.1/600-mips-bmips-add-pci-support.patch
@@ -14,7 +14,7 @@ Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -286,7 +286,6 @@ config BMIPS_GENERIC
+@@ -287,7 +287,6 @@ config BMIPS_GENERIC
  	select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
  	select HARDIRQS_SW_RESEND
  	select HAVE_PCI
diff --git a/target/linux/generic/hack-6.1/780-usb-net-MeigLink_modem_support.patch b/target/linux/generic/hack-6.1/780-usb-net-MeigLink_modem_support.patch
index 23f8be5d26..7257f7010b 100644
--- a/target/linux/generic/hack-6.1/780-usb-net-MeigLink_modem_support.patch
+++ b/target/linux/generic/hack-6.1/780-usb-net-MeigLink_modem_support.patch
@@ -29,7 +29,7 @@ Subject: [PATCH] net/usb/qmi_wwan: add MeigLink modem support
  
  #define QUECTEL_VENDOR_ID			0x2c7c
  /* These Quectel products use Quectel's vendor ID */
-@@ -1169,6 +1171,11 @@ static const struct usb_device_id option
+@@ -1173,6 +1175,11 @@ static const struct usb_device_id option
  	  .driver_info = ZLP },
  	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96),
  	  .driver_info = RSVD(4) },
diff --git a/target/linux/generic/pending-6.1/300-mips_expose_boot_raw.patch b/target/linux/generic/pending-6.1/300-mips_expose_boot_raw.patch
index a4413e919b..82576d644d 100644
--- a/target/linux/generic/pending-6.1/300-mips_expose_boot_raw.patch
+++ b/target/linux/generic/pending-6.1/300-mips_expose_boot_raw.patch
@@ -9,7 +9,7 @@ Acked-by: Rob Landley <rob@landley.net>
 ---
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -1032,9 +1032,6 @@ config FW_ARC
+@@ -1033,9 +1033,6 @@ config FW_ARC
  config ARCH_MAY_HAVE_PC_FDC
  	bool
  
@@ -19,7 +19,7 @@ Acked-by: Rob Landley <rob@landley.net>
  config CEVT_BCM1480
  	bool
  
-@@ -3089,6 +3086,18 @@ choice
+@@ -3090,6 +3087,18 @@ choice
  		bool "Extend builtin kernel arguments with bootloader arguments"
  endchoice