diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile index 072a2af738..74b03ddc12 100644 --- a/package/firmware/ipq-wifi/Makefile +++ b/package/firmware/ipq-wifi/Makefile @@ -27,6 +27,7 @@ ALLWIFIBOARDS:= \ cellc_rtl30vw \ century_wr142ac \ dlink_dap2610 \ + edgecore_ecw5410 \ engenius_eap2200 \ engenius_emd1 \ engenius_emr3500 \ @@ -36,6 +37,7 @@ ALLWIFIBOARDS:= \ hugo_ac1200 \ linksys_ea8300 \ mobipromo_cm520-79f \ + nec_wg2600hp3 \ p2w_r619ac \ qxwlan_e2600ac @@ -106,6 +108,7 @@ $(eval $(call generate-ipq-wifi-package,buffalo_wtr-m2133hp,Buffalo WTR-M2133HP) $(eval $(call generate-ipq-wifi-package,cellc_rtl30vw, Cell C RTL30VW)) $(eval $(call generate-ipq-wifi-package,century_wr142ac,Century WR142AC)) $(eval $(call generate-ipq-wifi-package,dlink_dap2610,D-Link DAP-2610)) +$(eval $(call generate-ipq-wifi-package,edgecore_ecw5410,Edgecore ECW5410)) $(eval $(call generate-ipq-wifi-package,engenius_eap2200,EnGenius EAP2200)) $(eval $(call generate-ipq-wifi-package,engenius_emd1,EnGenius EMD1)) $(eval $(call generate-ipq-wifi-package,engenius_emr3500,EnGenius EMR3500)) @@ -115,6 +118,7 @@ $(eval $(call generate-ipq-wifi-package,hiwifi_c526a,HiWiFi C526A)) $(eval $(call generate-ipq-wifi-package,hugo_ac1200,Hugo AC1200)) $(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300)) $(eval $(call generate-ipq-wifi-package,mobipromo_cm520-79f,MobiPromo CM520-79F)) +$(eval $(call generate-ipq-wifi-package,nec_wg2600hp3,NEC Platforms WG2600HP3)) $(eval $(call generate-ipq-wifi-package,p2w_r619ac,P&W R619AC)) $(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,Qxwlan E2600AC)) diff --git a/package/firmware/ipq-wifi/board-edgecore_ecw5410.qca9984 b/package/firmware/ipq-wifi/board-edgecore_ecw5410.qca9984 new file mode 100644 index 0000000000..2c1992001d Binary files /dev/null and b/package/firmware/ipq-wifi/board-edgecore_ecw5410.qca9984 differ diff --git a/package/firmware/ipq-wifi/board-nec_wg2600hp3.qca9984 b/package/firmware/ipq-wifi/board-nec_wg2600hp3.qca9984 new file mode 100644 index 0000000000..f95ccd251e Binary files /dev/null and b/package/firmware/ipq-wifi/board-nec_wg2600hp3.qca9984 differ diff --git a/target/linux/ipq806x/Makefile b/target/linux/ipq806x/Makefile index bede54fe7a..b7a4e1fc08 100644 --- a/target/linux/ipq806x/Makefile +++ b/target/linux/ipq806x/Makefile @@ -22,8 +22,8 @@ DEFAULT_PACKAGES += \ kmod-ata-core kmod-ata-ahci kmod-ata-ahci-platform \ kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \ kmod-phy-qcom-ipq806x-usb kmod-usb3 kmod-usb-dwc3-qcom \ - kmod-ath10k-ct wpad-openssl uboot-envtools e2fsprogs \ - autocore-arm automount autosamba shadowsocksr-libev-server \ + kmod-ath10k-ct wpad-openssl uboot-envtools \ + autocore-arm automount autosamba e2fsprogs \ luci-app-zerotier openssh-sftp-server $(eval $(call BuildTarget)) diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds b/target/linux/ipq806x/base-files/etc/board.d/01_leds index 903d2d1e13..284f9e2c1d 100755 --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds @@ -18,11 +18,18 @@ compex,wpq864) ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1" ucidef_set_led_usbport "pcie-usb" "PCIe USB" "green:usb-pcie" "usb3-port1" ;; +edgecore,ecw5410) + ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy1tpt" + ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy0tpt" + ;; nec,wg2600hp) ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy1tpt" ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy0tpt" ucidef_set_led_switch "wan" "WAN" "green:active" "switch0" "0x2" ;; +nec,wg2600hp3) + ucidef_set_led_switch "wan" "WAN" "green:active" "switch0" "0x2" + ;; netgear,d7800 |\ netgear,r7500 |\ netgear,r7500v2 |\ @@ -32,6 +39,15 @@ netgear,r7800) ucidef_set_led_switch "wan" "WAN" "white:wan" "switch0" "0x20" ucidef_set_led_ide "esata" "eSATA" "white:esata" ;; +tplink,ad7200) + ucidef_set_led_usbport "usb1" "USB 1" "blue:usb1" "usb1-port1" "usb2-port1" + ucidef_set_led_usbport "usb2" "USB 2" "blue:usb3" "usb3-port1" "usb4-port1" + ucidef_set_led_switch "wan" "wan" "blue:wan" "switch0" "0x02" + ucidef_set_led_switch "lan" "lan" "blue:lan" "switch0" "0x3c" + ucidef_set_led_wlan "wlan2g" "wlan2g" "blue:wlan2g" "phy2tpt" + ucidef_set_led_wlan "wlan5g" "wlan5g" "blue:wlan5g" "phy1tpt" + ucidef_set_led_netdev "wlan60g" "wlan60g" "blue:wlan60g" "wlan0" + ;; tplink,c2600) ucidef_set_led_usbport "usb1" "USB 1" "white:usb_2" "usb1-port1" "usb2-port1" ucidef_set_led_usbport "usb2" "USB 2" "white:usb_4" "usb3-port1" "usb4-port1" diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network index 5911be9aae..459788a3a0 100755 --- a/target/linux/ipq806x/base-files/etc/board.d/02_network +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network @@ -12,6 +12,11 @@ board_config_update board=$(board_name) case "$board" in +asrock,g10 |\ +nec,wg2600hp) + ucidef_add_switch "switch0" \ + "2:lan" "3:lan" "4:lan" "5:lan" "6@eth1" "1:wan" "0@eth0" + ;; buffalo,wxr-2533dhp |\ compex,wpq864 |\ netgear,d7800 |\ @@ -22,10 +27,16 @@ tplink,vr2600v) ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0" ;; -qcom,ipq8064-ap161) - ucidef_set_interface_lan "eth1 eth2" - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:lan" "3u@eth1" "6:wan" "4u@eth0" +edgecore,ecw5410) + ucidef_set_interfaces_lan_wan "eth1" "eth0" + if [ -b "$(find_mtd_part 0:art)" ]; then + ucidef_set_interface_macaddr "lan" "$(mtd_get_mac_binary "0:art" 0x6)" + ucidef_set_interface_macaddr "wan" "$(mtd_get_mac_binary "0:art" 0x0)" + else + # XXX: drop upper case after kernel v5.4 is gone (qcom-smem) + ucidef_set_interface_macaddr "lan" "$(mtd_get_mac_binary "0:ART" 0x6)" + ucidef_set_interface_macaddr "wan" "$(mtd_get_mac_binary "0:ART" 0x0)" + fi ;; linksys,ea7500-v1) hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr) @@ -41,15 +52,21 @@ linksys,ea8500) ucidef_set_interface_macaddr "lan" "$hw_mac_addr" ucidef_set_interface_macaddr "wan" "$hw_mac_addr" ;; -nec,wg2600hp) +nec,wg2600hp3) ucidef_add_switch "switch0" \ - "2:lan" "3:lan" "4:lan" "5:lan" "6@eth1" "1:wan" "0@eth0" + "2:lan" "3:lan" "4:lan" "5:lan" "0@eth1" "1:wan" "6@eth0" ;; netgear,r7800 |\ +tplink,ad7200 |\ tplink,c2600) ucidef_add_switch "switch0" \ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0" ;; +qcom,ipq8064-ap161) + ucidef_set_interface_lan "eth1 eth2" + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3u@eth1" "6:wan" "4u@eth0" + ;; qcom,ipq8064-db149) ucidef_set_interface_lan "eth1 eth2 eth3" ucidef_add_switch "switch0" \ @@ -62,6 +79,9 @@ ruijie,rg-mtfi-m520) ucidef_set_interface_macaddr "wan" "$hw_mac_addr" ucidef_set_interface_macaddr "lan" "$(macaddr_add $hw_mac_addr 1)" ;; +ubnt,unifi-ac-hd) + ucidef_set_interface_lan "eth0 eth1" + ;; zyxel,nbg6817) hw_mac_addr=$(mtd_get_mac_ascii 0:appsblenv ethaddr) # XXX: drop upper case after kernel v5.4 is gone (qcom-smem) diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index a0d8860e06..da70ab0341 100644 --- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -25,16 +25,33 @@ case "$FIRMWARE" in ;; "ath10k/pre-cal-pci-0000:01:00.0.bin") case $board in + asrock,g10) + if [ -b "$(find_mtd_part 0:art)" ]; then + caldata_extract "0:art" 0x1000 0x2f20 + else + # XXX: drop upper case after kernel v5.4 is gone (qcom-smem) + caldata_extract "0:ART" 0x1000 0x2f20 + fi + ;; buffalo,wxr-2533dhp) caldata_extract "ART" 0x1000 0x2f20 ath10k_patch_mac $(mtd_get_mac_binary ART 0x1e) ;; + edgecore,ecw5410) + if [ -b "$(find_mtd_part 0:art)" ]; then + caldata_extract "0:art" 0x1000 0x2f20 + else + # XXX: drop upper case after kernel v5.4 is gone (qcom-smem) + caldata_extract "0:ART" 0x1000 0x2f20 + fi + ;; linksys,ea7500-v1 |\ linksys,ea8500) caldata_extract "art" 0x1000 0x2f20 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +1) ;; - nec,wg2600hp) + nec,wg2600hp |\ + nec,wg2600hp3) caldata_extract "ART" 0x1000 0x2f20 ath10k_patch_mac $(mtd_get_mac_binary PRODUCTDATA 0x12) ;; @@ -44,6 +61,7 @@ case "$FIRMWARE" in caldata_extract "art" 0x1000 0x2f20 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x6) +1) ;; + tplink,ad7200 |\ tplink,c2600) caldata_extract "radio" 0x1000 0x2f20 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 0x8) -1) @@ -66,6 +84,14 @@ case "$FIRMWARE" in ;; "ath10k/pre-cal-pci-0001:01:00.0.bin") case $board in + asrock,g10) + if [ -b "$(find_mtd_part 0:art)" ]; then + caldata_extract "0:art" 0x5000 0x2f20 + else + # XXX: drop upper case after kernel v5.4 is gone (qcom-smem) + caldata_extract "0:ART" 0x5000 0x2f20 + fi + ;; buffalo,wxr-2533dhp) caldata_extract "ART" 0x5000 0x2f20 ath10k_patch_mac $(mtd_get_mac_binary ART 0x18) @@ -75,7 +101,8 @@ case "$FIRMWARE" in caldata_extract "art" 0x5000 0x2f20 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +2) ;; - nec,wg2600hp) + nec,wg2600hp |\ + nec,wg2600hp3) caldata_extract "ART" 0x5000 0x2f20 ath10k_patch_mac $(mtd_get_mac_binary PRODUCTDATA 0xc) ;; @@ -85,6 +112,7 @@ case "$FIRMWARE" in caldata_extract "art" 0x5000 0x2f20 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x6) +2) ;; + tplink,ad7200 |\ tplink,c2600) caldata_extract "radio" 0x5000 0x2f20 ath10k_patch_mac $(mtd_get_mac_binary default-mac 0x8) @@ -105,6 +133,18 @@ case "$FIRMWARE" in ;; esac ;; +"ath10k/pre-cal-pci-0002:01:00.0.bin") + case $board in + edgecore,ecw5410) + if [ -b "$(find_mtd_part 0:art)" ]; then + caldata_extract "0:art" 0x5000 0x2f20 + else + # XXX: drop upper case after kernel v5.4 is gone (qcom-smem) + caldata_extract "0:ART" 0x5000 0x2f20 + fi + ;; + esac + ;; *) exit 1 ;; diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index 4b476e56ae..5af3a5b805 100644 --- a/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -9,17 +9,25 @@ PHYNBR=${DEVPATH##*/phy} . /lib/functions.sh . /lib/functions/system.sh +board=$(board_name) + +case "$board" in + ubnt,unifi-ac-hd) + macaddr_add $(mtd_get_mac_binary EEPROM 0x6) $(($PHYNBR + 1)) > /sys${DEVPATH}/macaddress + ;; +esac + OPATH=${DEVPATH##/devices/platform/} OPATH=${OPATH%%/ieee*} # 10 radios is enough for anyone! -for i in `seq 0 9`; +for i in $(seq 0 9); do - BUS=`uci get wireless.@wifi-device[$i].path` + BUS=$(uci get wireless.@wifi-device[$i].path) if [ "$BUS " == "$OPATH " ] then PHYNAME=${DEVPATH##*ieee80211/} - NPHYNAME=`uci get wireless.@wifi-device[$i].phyname` + NPHYNAME=$(uci get wireless.@wifi-device[$i].phyname) if [ "$NPHYNAME " != " " ] then if [ "$PHYNAME " != "$NPHYNAME " ] diff --git a/target/linux/ipq806x/base-files/etc/init.d/bootcount b/target/linux/ipq806x/base-files/etc/init.d/bootcount new file mode 100755 index 0000000000..cb32a4ed35 --- /dev/null +++ b/target/linux/ipq806x/base-files/etc/init.d/bootcount @@ -0,0 +1,20 @@ +#!/bin/sh /etc/rc.common + +START=99 + +. "$IPKG_INSTROOT/lib/upgrade/asrock.sh" + +boot() { + case $(board_name) in + asrock,g10) + asrock_bootconfig_mangle "bootcheck" && reboot + ;; + edgecore,ecw5410) + fw_setenv bootcount 0 + ;; + linksys,ea7500-v1 |\ + linksys,ea8500) + mtd resetbc s_env || true + ;; + esac +} diff --git a/target/linux/ipq806x/base-files/etc/init.d/linksys_recovery b/target/linux/ipq806x/base-files/etc/init.d/linksys_recovery deleted file mode 100755 index 89d147e3b0..0000000000 --- a/target/linux/ipq806x/base-files/etc/init.d/linksys_recovery +++ /dev/null @@ -1,21 +0,0 @@ -#!/bin/sh /etc/rc.common -# Copyright (C) 2015 OpenWrt.org - -START=97 -boot() { - . /lib/functions.sh - - case $(board_name) in - linksys,ea7500-v1 |\ - linksys,ea8500) - # make sure auto_recovery in uboot is always on - AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`" - if [ "$AUTO_RECOVERY_ENA" != "yes" ] ; then - fw_setenv auto_recovery yes - fi - # reset the boot counter - mtd resetbc s_env - ;; - esac - -} diff --git a/target/linux/ipq806x/base-files/lib/preinit/04_reorder_eth b/target/linux/ipq806x/base-files/lib/preinit/04_reorder_eth new file mode 100644 index 0000000000..9f58473617 --- /dev/null +++ b/target/linux/ipq806x/base-files/lib/preinit/04_reorder_eth @@ -0,0 +1,13 @@ +. /lib/functions.sh + +preinit_reorder_eth() { + case $(board_name) in + ubnt,unifi-ac-hd) + ip link set eth0 name ethtmp + ip link set eth1 name eth0 + ip link set ethtmp name eth1 + ;; + esac +} + +boot_hook_add preinit_main preinit_reorder_eth diff --git a/target/linux/ipq806x/base-files/lib/preinit/05_set_iface_mac_ipq806x.sh b/target/linux/ipq806x/base-files/lib/preinit/05_set_iface_mac_ipq806x.sh index 6e3e97d12f..642be08f28 100644 --- a/target/linux/ipq806x/base-files/lib/preinit/05_set_iface_mac_ipq806x.sh +++ b/target/linux/ipq806x/base-files/lib/preinit/05_set_iface_mac_ipq806x.sh @@ -1,9 +1,13 @@ -#!/bin/sh - . /lib/functions.sh preinit_set_mac_address() { case $(board_name) in + asrock,g10) + lan_mac=$(mtd_get_mac_ascii hwconfig HW.LAN.MAC.Address) + wan_mac=$(mtd_get_mac_ascii hwconfig HW.WAN.MAC.Address) + ip link set dev eth0 address "${lan_mac}" + ip link set dev eth1 address "${wan_mac}" + ;; ruijie,rg-mtfi-m520) base_mac=$(mtd_get_mac_ascii PRODUCTINFO ethaddr) ip link set dev eth0 address $(macaddr_add "$base_mac" +1) diff --git a/target/linux/ipq806x/base-files/lib/upgrade/asrock.sh b/target/linux/ipq806x/base-files/lib/upgrade/asrock.sh new file mode 100644 index 0000000000..8be737d2da --- /dev/null +++ b/target/linux/ipq806x/base-files/lib/upgrade/asrock.sh @@ -0,0 +1,56 @@ +. /lib/functions.sh + +asrock_bootconfig_mangle() { + local mtdnum="$(find_mtd_index 0:bootconfig)" + # XXX: drop upper case after kernel v5.4 is gone (qcom-smem) + [ -n "$mtdnum" ] || mtdnum="$(find_mtd_index 0:BOOTCONFIG)" + + if [ -z "$mtdnum" ]; then + echo "cannot find bootconfig mtd partition" + return 1 + fi + dd if=/dev/mtd$mtdnum of=/tmp/mtd$mtdnum bs=1k + + local partition_byte="$(dd if=/tmp/mtd$mtdnum bs=1 skip=52 count=1)" + local upgrade_byte="$(dd if=/tmp/mtd$mtdnum bs=1 skip=4 count=1)" + + if [ $1 = "bootcheck" ]; then + if [ ! -s $upgrade_byte ]; then + dd if=/dev/mtd$mtdnum of=/tmp/mtd$mtdnum bs=1k + printf '\x00' | dd of=/tmp/mtd$mtdnum conv=notrunc bs=1 seek=4 + printf '\x00' | dd of=/tmp/mtd$mtdnum conv=notrunc bs=1 seek=56 + else + return 1 + fi + elif [ $1 = "sysupgrade" ]; then + printf '\x01' | dd of=/tmp/mtd$mtdnum conv=notrunc bs=1 seek=4 + printf '\x01' | dd of=/tmp/mtd$mtdnum conv=notrunc bs=1 seek=56 + fi + + if [ -s $partition_byte ]; then + printf '\x01' | dd of=/tmp/mtd$mtdnum conv=notrunc bs=1 seek=52 + else + printf '\x00' | dd of=/tmp/mtd$mtdnum conv=notrunc bs=1 seek=52 + fi + + mtd write /tmp/mtd$mtdnum /dev/mtd$mtdnum + return 0 +} + +asrock_upgrade_prepare() { + local ubidev="$( nand_find_ubi ubi )" + + #Set upgrade flag. If something goes wrong, router will boot with + #factory firmware. + asrock_bootconfig_mangle 'sysupgrade' + + if [ $? -ne 0 ]; then + echo "cannot find bootconfig mtd partition" + exit 1 + fi + + # Just delete these partitions if present and use + # OpenWrt's standard names for those. + ubirmvol /dev/$ubidev -N ubi_rootfs &> /dev/null || true + ubirmvol /dev/$ubidev -N ubi_rootfs_data &> /dev/null || true +} diff --git a/target/linux/ipq806x/base-files/lib/upgrade/linksys.sh b/target/linux/ipq806x/base-files/lib/upgrade/linksys.sh index 0234ce0a51..22771278ce 100644 --- a/target/linux/ipq806x/base-files/lib/upgrade/linksys.sh +++ b/target/linux/ipq806x/base-files/lib/upgrade/linksys.sh @@ -3,28 +3,45 @@ # linksys_get_target_firmware() { - cur_boot_part=`/usr/sbin/fw_printenv -n boot_part` - target_firmware="" - if [ "$cur_boot_part" = "1" ] - then - # current primary boot - update alt boot - target_firmware="kernel2" - fw_setenv boot_part 2 - #In EA8500 bootcmd is always "bootipq", so don't change - #fw_setenv bootcmd "run altnandboot" - elif [ "$cur_boot_part" = "2" ] - then - # current alt boot - update primary boot - target_firmware="kernel1" - fw_setenv boot_part 1 - #In EA8500 bootcmd is always "bootipq", so don't change - #fw_setenv bootcmd "run nandboot" + + local cur_boot_part mtd_ubi0 + + cur_boot_part=$(/usr/sbin/fw_printenv -n boot_part) + if [ -z "${cur_boot_part}" ] ; then + mtd_ubi0=$(cat /sys/devices/virtual/ubi/ubi0/mtd_num) + case $(egrep ^mtd${mtd_ubi0}: /proc/mtd | cut -d '"' -f 2) in + kernel1|rootfs1) + cur_boot_part=1 + ;; + kernel2|rootfs2) + cur_boot_part=2 + ;; + esac + >&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \ + "${cur_boot_part}" "${mtd_ubi0}" fi - # re-enable recovery so we get back if the new firmware is broken - fw_setenv auto_recovery yes - - echo "$target_firmware" + case $cur_boot_part in + 1) + fw_setenv -s - <<-EOF + boot_part 2 + auto_recovery yes + EOF + printf "kernel2" + return + ;; + 2) + fw_setenv -s - <<-EOF + boot_part 1 + auto_recovery yes + EOF + printf "kernel1" + return + ;; + *) + return + ;; + esac } linksys_get_root_magic() { diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh index f6b44fe753..f7fe041efc 100644 --- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh +++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh @@ -10,26 +10,40 @@ platform_check_image() { platform_do_upgrade() { case "$(board_name)" in + asrock,g10) + asrock_upgrade_prepare + nand_do_upgrade "$ARGV" + ;; buffalo,wxr-2533dhp) buffalo_upgrade_prepare_ubi CI_ROOTPART="ubi_rootfs" nand_do_upgrade "$ARGV" ;; - compex,wpq864|\ + compex,wpq864 |\ netgear,d7800 |\ netgear,r7500 |\ netgear,r7500v2 |\ netgear,r7800 |\ qcom,ipq8064-ap148 |\ - qcom,ipq8064-ap161 |\ - ruijie,rg-mtfi-m520 |\ - zyxel,nbg6817) + qcom,ipq8064-ap161) + nand_do_upgrade "$ARGV" + ;; + edgecore,ecw5410) + part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')" + if [ "$part" = "rootfs1" ]; then + fw_setenv active 2 || exit 1 + CI_UBIPART="rootfs2" + else + fw_setenv active 1 || exit 1 + CI_UBIPART="rootfs1" + fi nand_do_upgrade "$ARGV" ;; linksys,ea7500-v1 |\ linksys,ea8500) platform_do_upgrade_linksys "$ARGV" ;; + tplink,ad7200 |\ tplink,c2600) PART_NAME="os-image:rootfs" MTD_CONFIG_ARGS="-s 0x200000" @@ -40,20 +54,14 @@ platform_do_upgrade() { MTD_CONFIG_ARGS="-s 0x200000" default_do_upgrade "$ARGV" ;; - nec,wg2600hp |\ - *) - default_do_upgrade "$ARGV" - ;; - esac -} - -platform_nand_pre_upgrade() { - case "$(board_name)" in ruijie,rg-mtfi-m520) ruijie_do_upgrade "$1" ;; zyxel,nbg6817) zyxel_do_upgrade "$1" ;; + *) + default_do_upgrade "$ARGV" + ;; esac } diff --git a/target/linux/ipq806x/base-files/lib/upgrade/ruijie.sh b/target/linux/ipq806x/base-files/lib/upgrade/ruijie.sh index 46723ec5d3..6644621715 100644 --- a/target/linux/ipq806x/base-files/lib/upgrade/ruijie.sh +++ b/target/linux/ipq806x/base-files/lib/upgrade/ruijie.sh @@ -48,5 +48,7 @@ ruijie_do_upgrade() { ruijie_do_flash $tar_file $kernel $rootfs + nand_do_upgrade "$1" + return 0 } diff --git a/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh b/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh index 3e58665aec..3e9a1a0fcc 100644 --- a/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh +++ b/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh @@ -121,5 +121,7 @@ zyxel_do_upgrade() { zyxel_do_flash $tar_file $kernel $rootfs $dualflagmtd + nand_do_upgrade "$1" + return 0 } diff --git a/target/linux/ipq806x/base-files/sbin/asrock_g10_back_to_factory b/target/linux/ipq806x/base-files/sbin/asrock_g10_back_to_factory new file mode 100755 index 0000000000..0ab6f176d0 --- /dev/null +++ b/target/linux/ipq806x/base-files/sbin/asrock_g10_back_to_factory @@ -0,0 +1,15 @@ +#!/bin/sh + +. /lib/upgrade/asrock.sh + +case $(board_name) in +asrock,g10) + asrock_bootconfig_mangle "factory" + if [ $? -eq 0 ]; then + reboot + fi + ;; +*) + echo "Unsupported hardware." + ;; +esac diff --git a/target/linux/ipq806x/config-5.4 b/target/linux/ipq806x/config-5.4 index 298dc03a46..80549ad304 100644 --- a/target/linux/ipq806x/config-5.4 +++ b/target/linux/ipq806x/config-5.4 @@ -79,6 +79,7 @@ CONFIG_CC_HAS_KASAN_GENERIC=y CONFIG_CLKDEV_LOOKUP=y CONFIG_CLKSRC_QCOM=y CONFIG_CLONE_BACKWARDS=y +CONFIG_CMDLINE_OVERRIDE=y CONFIG_COMMON_CLK=y CONFIG_COMMON_CLK_QCOM=y CONFIG_COMPAT_32BIT_TIME=y diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts deleted file mode 100644 index d2e0efe92d..0000000000 --- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts +++ /dev/null @@ -1,303 +0,0 @@ -#include "qcom-ipq8064-v2.0.dtsi" - -#include - -/ { - model = "Linksys EA8500 WiFi Router"; - compatible = "linksys,ea8500", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - aliases { - mdio-gpio0 = &mdio0; - - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - chosen { - bootargs = "console=ttyMSM0,115200n8"; - append-rootblock = "ubi.mtd="; /* append to bootargs adding the root deviceblock nbr from bootloader */ - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - wps { - label = "green:wps"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - }; - - power: power { - label = "white:power"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - wifi { - label = "green:wifi"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio65", "gpio67", "gpio68"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio6", "gpio53", "gpio54"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; -}; - -&sata_phy { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - max-link-speed = <1>; -}; - -&pcie1 { - status = "okay"; -}; - -&pcie2 { - status = "okay"; -}; - -&nand_controller { - status = "okay"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - SBL1@0 { - label = "SBL1"; - reg = <0x0000000 0x0040000>; - read-only; - }; - - MIBIB@40000 { - label = "MIBIB"; - reg = <0x0040000 0x0140000>; - read-only; - }; - - SBL2@180000 { - label = "SBL2"; - reg = <0x0180000 0x0140000>; - read-only; - }; - - SBL3@2c0000 { - label = "SBL3"; - reg = <0x02c0000 0x0280000>; - read-only; - }; - - DDRCONFIG@540000 { - label = "DDRCONFIG"; - reg = <0x0540000 0x0120000>; - read-only; - }; - - SSD@660000 { - label = "SSD"; - reg = <0x0660000 0x0120000>; - read-only; - }; - - TZ@780000 { - label = "TZ"; - reg = <0x0780000 0x0280000>; - read-only; - }; - - RPM@a00000 { - label = "RPM"; - reg = <0x0a00000 0x0280000>; - read-only; - }; - - art: art@c80000 { - label = "art"; - reg = <0x0c80000 0x0140000>; - read-only; - }; - - APPSBL@dc0000 { - label = "APPSBL"; - reg = <0x0dc0000 0x0100000>; - read-only; - }; - - u_env@ec0000 { - label = "u_env"; - reg = <0x0ec0000 0x0040000>; - }; - - s_env@f00000 { - label = "s_env"; - reg = <0x0f00000 0x0040000>; - }; - - devinfo@f40000 { - label = "devinfo"; - reg = <0x0f40000 0x0040000>; - }; - - linux@f80000 { - label = "kernel1"; - reg = <0x0f80000 0x2800000>; /* 3 MB spill to rootfs*/ - }; - - rootfs@1280000 { - label = "rootfs1"; - reg = <0x1280000 0x2500000>; - }; - - linux2@3780000 { - label = "kernel2"; - reg = <0x3780000 0x2800000>; - }; - - rootfs2@3a80000 { - label = "rootfs2"; - reg = <0x3a80000 0x2500000>; - }; - - syscfg@5f80000 { - label = "syscfg"; - reg = <0x5f80000 0x2080000>; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x00010 0x2613a0 /* PWS_REG */ - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; - }; - - phy4: ethernet-phy@4 { - reg = <4>; - }; -}; - -&gmac1 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <1>; - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,rgmii_delay = <0>; - qcom,emulation = <0>; - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - fixed-link { - speed = <1000>; - full-duplex; - }; -}; -/* LAN */ -&gmac2 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <2>; - qcom,phy_mdio_addr = <0>; /* none */ - qcom,poll_required = <0>; /* no polling */ - qcom,rgmii_delay = <0>; - qcom,emulation = <0>; - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&adm_dma { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts new file mode 100644 index 0000000000..3e04618d57 --- /dev/null +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts @@ -0,0 +1,438 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq8062.dtsi" +#include + +/delete-node/ &nand_pins; + +/ { + model = "NEC Platforms Aterm WG2600HP3"; + compatible = "nec,wg2600hp3", "qcom,ipq8062", "qcom,ipq8064"; + + memory { + device_type = "memory"; + reg = <0x42000000 0x1e000000>; + }; + + aliases { + label-mac-device = &gmac2; + + led-boot = &led_power_green; + led-failsafe = &led_power_red; + led-running = &led_power_green; + led-upgrade = &led_power_red; + }; + + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&buttons_pins>; + pinctrl-names = "default"; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + + mode0 { + label = "mode0"; + gpios = <&qcom_pinmux 40 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + debounce-interval = <60>; + wakeup-source; + }; + + mode1 { + label = "mode1"; + gpios = <&qcom_pinmux 41 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + debounce-interval = <60>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&leds_pins>; + pinctrl-names = "default"; + + led_power_green: power_green { + label = "green:power"; + gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>; + }; + + led_power_red: power_red { + label = "red:power"; + gpios = <&qcom_pinmux 35 GPIO_ACTIVE_HIGH>; + }; + + active_green { + label = "green:active"; + gpios = <&qcom_pinmux 42 GPIO_ACTIVE_HIGH>; + }; + + active_red { + label = "red:active"; + gpios = <&qcom_pinmux 38 GPIO_ACTIVE_HIGH>; + }; + + wlan2g_green { + label = "green:wlan2g"; + gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy1tpt"; + }; + + wlan2g_red { + label = "red:wlan2g"; + gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>; + }; + + wlan5g_green { + label = "green:wlan5g"; + gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; + + wlan5g_red { + label = "red:wlan5g"; + gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>; + }; + + tv_green { + label = "green:tv"; + gpios = <&qcom_pinmux 46 GPIO_ACTIVE_HIGH>; + }; + + tv_red { + label = "red:tv"; + gpios = <&qcom_pinmux 36 GPIO_ACTIVE_HIGH>; + }; + + converter_green { + label = "green:converter"; + gpios = <&qcom_pinmux 43 GPIO_ACTIVE_HIGH>; + }; + + converter_red { + label = "red:converter"; + gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&qcom_pinmux { + pinctrl-0 = <&akro_pins>; + pinctrl-names = "default"; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + bias-pull-down; + }; + + data { + pins = "gpio18", "gpio19"; + drive-strength = <10>; + }; + + cs { + pins = "gpio20"; + drive-strength = <10>; + }; + + clk { + pins = "gpio21"; + drive-strength = <12>; + }; + }; + + buttons_pins: buttons_pins { + mux { + pins = "gpio22", "gpio24", "gpio40", + "gpio41"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + leds_pins: leds_pins { + mux { + pins = "gpio14", "gpio15", "gpio35", + "gpio36", "gpio38", "gpio42", + "gpio43", "gpio46", "gpio55", + "gpio56", "gpio57", "gpio58"; + function = "gpio"; + bias-pull-down; + }; + + akro2 { + pins = "gpio15", "gpio35", "gpio38", + "gpio42", "gpio43", "gpio46", + "gpio55", "gpio56", "gpio57", + "gpio58"; + drive-strength = <2>; + }; + + akro4 { + pins = "gpio14", "gpio36"; + drive-strength = <4>; + }; + }; + + /* + * Stock firmware has the following settings, so let's do the same. + * I don't sure why these are required. + */ + akro_pins: akro_pinmux { + akro { + pins = "gpio17", "gpio26", "gpio47"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + reset { + pins = "gpio45"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + gmac0_rgmii { + pins = "gpio25"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; +}; + +&gsbi5 { + status = "okay"; + qcom,mode = ; + + spi@1a280000 { + status = "okay"; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SBL1"; + reg = <0x0000000 0x0020000>; + read-only; + }; + + partition@20000 { + label = "MIBIB"; + reg = <0x0020000 0x0020000>; + read-only; + }; + + partition@40000 { + label = "SBL2"; + reg = <0x0040000 0x0040000>; + read-only; + }; + + partition@80000 { + label = "SBL3"; + reg = <0x0080000 0x0080000>; + read-only; + }; + + partition@100000 { + label = "DDRCONFIG"; + reg = <0x0100000 0x0010000>; + read-only; + }; + + partition@110000 { + label = "SSD"; + reg = <0x0110000 0x0010000>; + read-only; + }; + + partition@120000 { + label = "TZ"; + reg = <0x0120000 0x0080000>; + read-only; + }; + + partition@1a0000 { + label = "RPM"; + reg = <0x01a0000 0x0080000>; + read-only; + }; + + partition@220000 { + label = "APPSBL"; + reg = <0x0220000 0x0080000>; + read-only; + }; + + partition@2a0000 { + label = "APPSBLENV"; + reg = <0x02a0000 0x0010000>; + read-only; + }; + + factory: partition@2b0000 { + label = "PRODUCTDATA"; + reg = <0x02b0000 0x0030000>; + read-only; + }; + + partition@2e0000 { + label = "ART"; + reg = <0x02e0000 0x0040000>; + read-only; + }; + + partition@320000 { + label = "TP"; + reg = <0x0320000 0x0040000>; + read-only; + }; + + partition@360000 { + label = "TINY"; + reg = <0x0360000 0x0500000>; + read-only; + }; + + partition@860000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x0860000 0x17a0000>; + }; + }; + }; + }; +}; + +&adm_dma { + status = "okay"; +}; + +&pcie0 { + status = "okay"; + + bridge@0,0 { + reg = <0x00000000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi@1,0 { + compatible = "qcom,ath10k"; + reg = <0x00010000 0 0 0 0>; + + qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3"; + }; + }; +}; + +&pcie1 { + status = "okay"; + force_gen1 = <1>; + + bridge@0,0 { + reg = <0x00000000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi@1,0 { + compatible = "qcom,ath10k"; + reg = <0x00010000 0 0 0 0>; + + ieee80211-freq-limit = <2400000 2483000>; + qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3"; + }; + }; +}; + +&mdio0 { + status = "okay"; + + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + reg = <0>; + qca,ar8327-initvals = < + 0x04 0x80080080 /* PAD0_MODE */ + 0x0c 0x06000000 /* PAD6_MODE */ + 0x10 0x002613a0 /* PWS_REG */ + 0x50 0xcc36cc36 /* LED_CTRL0 */ + 0x54 0xca36ca36 /* LED_CTRL1 */ + 0x58 0xc936c936 /* LED_CTRL2 */ + 0x5c 0x03ffff00 /* LED_CTRL3 */ + 0x7c 0x0000004e /* PORT0_STATUS */ + 0x94 0x0000004e /* PORT6_STATUS */ + 0xe0 0xc74164de /* SGMII_CTRL */ + 0xe4 0x0006a545 /* MAC_PWR_SEL */ + >; + }; +}; + +&gmac1 { + status = "okay"; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + phy-mode = "rgmii"; + qcom,id = <1>; + mdiobus = <&mdio0>; + mtd-mac-address = <&factory 0x0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&gmac2 { + status = "okay"; + phy-mode = "sgmii"; + qcom,id = <2>; + mdiobus = <&mdio0>; + mtd-mac-address = <&factory 0x6>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ad7200-c2600.dtsi similarity index 63% rename from target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-c2600.dts rename to target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ad7200-c2600.dtsi index 4ae7de604b..af0efb2565 100644 --- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-c2600.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ad7200-c2600.dtsi @@ -1,11 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + #include "qcom-ipq8064-v2.0.dtsi" #include / { - model = "TP-Link Archer C2600"; - compatible = "tplink,c2600", "qcom,ipq8064"; - memory@0 { reg = <0x42000000 0x1e000000>; device_type = "memory"; @@ -13,112 +12,11 @@ aliases { mdio-gpio0 = &mdio0; - - led-boot = &power; - led-failsafe = &general; - led-running = &power; - led-upgrade = &general; label-mac-device = &gmac2; }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - ledswitch { - label = "ledswitch"; - gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - lan { - label = "white:lan"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>; - }; - - usb4 { - label = "white:usb_4"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - usb2 { - label = "white:usb_2"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - wps { - label = "white:wps"; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - wan_amber { - label = "amber:wan"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; - }; - - wan_white { - label = "white:wan"; - gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>; - }; - - power: power { - label = "white:power"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - general: general { - label = "white:general"; - gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>; - }; - }; }; &qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio16", "gpio54", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33", - "gpio53", "gpio66"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - spi_pins: spi_pins { mux { pins = "gpio18", "gpio19", "gpio21"; @@ -169,7 +67,7 @@ qcom,mode = ; status = "okay"; - spi5: spi@1a280000 { + spi@1a280000 { status = "okay"; pinctrl-0 = <&spi_pins>; @@ -177,156 +75,156 @@ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - m25p80@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <50000000>; reg = <0>; - SBL1@0 { + partition@0 { label = "SBL1"; reg = <0x0 0x20000>; read-only; }; - MIBIB@20000 { + partition@20000 { label = "MIBIB"; reg = <0x20000 0x20000>; read-only; }; - SBL2@40000 { + partition@40000 { label = "SBL2"; reg = <0x40000 0x20000>; read-only; }; - SBL3@60000 { + partition@60000 { label = "SBL3"; reg = <0x60000 0x30000>; read-only; }; - DDRCONFIG@90000 { + partition@90000 { label = "DDRCONFIG"; reg = <0x90000 0x10000>; read-only; }; - SSD@a0000 { + partition@a0000 { label = "SSD"; reg = <0xa0000 0x10000>; read-only; }; - TZ@b0000 { + partition@b0000 { label = "TZ"; reg = <0xb0000 0x30000>; read-only; }; - RPM@e0000 { + partition@e0000 { label = "RPM"; reg = <0xe0000 0x20000>; read-only; }; - fs-uboot@100000 { + partition@100000 { label = "fs-uboot"; reg = <0x100000 0x70000>; read-only; }; - uboot-env@170000 { + partition@170000 { label = "uboot-env"; reg = <0x170000 0x40000>; read-only; }; - radio@1b0000 { + partition@1b0000 { label = "radio"; reg = <0x1b0000 0x40000>; read-only; }; - os-image@1f0000 { + partition@1f0000 { label = "os-image"; reg = <0x1f0000 0x400000>; }; - rootfs@5f0000 { + partition@5f0000 { label = "rootfs"; reg = <0x5f0000 0x1900000>; }; - defaultmac: default-mac@1ef0000 { + defaultmac: partition@1ef0000 { label = "default-mac"; reg = <0x1ef0000 0x00200>; read-only; }; - pin@1ef0200 { + partition@1ef0200 { label = "pin"; reg = <0x1ef0200 0x00200>; read-only; }; - product-info@1ef0400 { + partition@1ef0400 { label = "product-info"; reg = <0x1ef0400 0x0fc00>; read-only; }; - partition-table@1f00000 { + partition@1f00000 { label = "partition-table"; reg = <0x1f00000 0x10000>; read-only; }; - soft-version@1f10000 { + partition@1f10000 { label = "soft-version"; reg = <0x1f10000 0x10000>; read-only; }; - support-list@1f20000 { + partition@1f20000 { label = "support-list"; reg = <0x1f20000 0x10000>; read-only; }; - profile@1f30000 { + partition@1f30000 { label = "profile"; reg = <0x1f30000 0x10000>; read-only; }; - default-config@1f40000 { + partition@1f40000 { label = "default-config"; reg = <0x1f40000 0x10000>; read-only; }; - user-config@1f50000 { + partition@1f50000 { label = "user-config"; reg = <0x1f50000 0x40000>; read-only; }; - qos-db@1f90000 { + partition@1f90000 { label = "qos-db"; reg = <0x1f90000 0x40000>; read-only; }; - usb-config@1fd0000 { + partition@1fd0000 { label = "usb-config"; reg = <0x1fd0000 0x10000>; read-only; }; - log@1fe0000 { + partition@1fe0000 { label = "log"; reg = <0x1fe0000 0x20000>; read-only; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts new file mode 100644 index 0000000000..6cb21fc4f3 --- /dev/null +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts @@ -0,0 +1,135 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq8064-ad7200-c2600.dtsi" + +/ { + model = "TP-Link Talon AD7200"; + compatible = "tplink,ad7200", "qcom,ipq8064"; + + aliases { + led-boot = &led_status; + led-failsafe = &led_status; + led-running = &led_status; + led-upgrade = &led_status; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + wifi { + label = "wifi"; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + + led_enable { + label = "led-enable"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + lan { + label = "blue:lan"; + gpios = <&qcom_pinmux 2 GPIO_ACTIVE_HIGH>; + }; + + usb1 { + label = "blue:usb1"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + }; + + wlan5g { + label = "blue:wlan5g"; + gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>; + }; + + usb3 { + label = "blue:usb3"; + gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>; + }; + + wlan2g { + label = "blue:wlan2g"; + gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>; + }; + + wan_orange { + label = "orange:wan"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; + }; + + wan_blue { + label = "blue:wan"; + gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "blue:wps"; + gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>; + }; + + wlan60g { + label = "blue:wlan60g"; + gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>; + }; + + led_status: status { + label = "blue:status"; + gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&qcom_pinmux { + button_pins: button_pins { + mux { + pins = "gpio53", "gpio54", "gpio67"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio2", "gpio8", "gpio15", "gpio16", "gpio17", "gpio26", + "gpio33", "gpio55", "gpio56", "gpio66"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; +}; + +&pcie2 { + status = "okay"; + max-link-speed = <1>; +}; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ap148.dts similarity index 100% rename from target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts rename to target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ap148.dts diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap161.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ap161.dts similarity index 100% rename from target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap161.dts rename to target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ap161.dts diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-c2600.dts new file mode 100644 index 0000000000..cef1aba344 --- /dev/null +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-c2600.dts @@ -0,0 +1,119 @@ +#include "qcom-ipq8064-ad7200-c2600.dtsi" + +/ { + model = "TP-Link Archer C2600"; + compatible = "tplink,c2600", "qcom,ipq8064"; + + aliases { + led-boot = &power; + led-failsafe = &general; + led-running = &power; + led-upgrade = &general; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + wifi { + label = "wifi"; + gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + + ledswitch { + label = "ledswitch"; + gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + lan { + label = "white:lan"; + gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>; + }; + + usb4 { + label = "white:usb_4"; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; + }; + + usb2 { + label = "white:usb_2"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + }; + + wps { + label = "white:wps"; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + }; + + wan_amber { + label = "amber:wan"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; + }; + + wan_white { + label = "white:wan"; + gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>; + }; + + power: power { + label = "white:power"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + general: general { + label = "white:general"; + gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&qcom_pinmux { + button_pins: button_pins { + mux { + pins = "gpio16", "gpio54", "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33", + "gpio53", "gpio66"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; +}; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-d7800.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-d7800.dts similarity index 99% rename from target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-d7800.dts rename to target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-d7800.dts index e460b1a738..82535cc86b 100644 --- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-d7800.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-d7800.dts @@ -292,13 +292,17 @@ &gmac1 { status = "okay"; phy-mode = "rgmii"; - phy-handle = <&phy4>; qcom,id = <1>; pinctrl-0 = <&rgmii2_pins>; pinctrl-names = "default"; mtd-mac-address = <&art 6>; + + fixed-link { + speed = <1000>; + full-duplex; + }; }; &gmac2 { diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-db149.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-db149.dts similarity index 100% rename from target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-db149.dts rename to target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-db149.dts diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts new file mode 100644 index 0000000000..9d82d52d27 --- /dev/null +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq8064-eax500.dtsi" + +/ { + model = "Linksys EA7500 V1 WiFi Router"; + compatible = "linksys,ea7500-v1", "qcom,ipq8064"; + + memory@0 { + reg = <0x42000000 0xe000000>; + device_type = "memory"; + }; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + /* look for root deviceblock nbr in this bootarg */ + find-rootblock = "ubi.mtd="; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + led_power: power { + label = "white:power"; + gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + }; +}; + +&qcom_pinmux { + button_pins: button_pins { + mux { + pins = "gpio65", "gpio68"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio6"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; +}; + +&partitions { + partition@5f80000 { + label = "sysdiag"; + reg = <0x5f80000 0x100000>; + }; + + partition@6080000 { + label = "syscfg"; + reg = <0x6080000 0x1f80000>; + }; +}; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts new file mode 100644 index 0000000000..1c6a4bdacd --- /dev/null +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts @@ -0,0 +1,128 @@ +#include "qcom-ipq8064-eax500.dtsi" + +/ { + model = "Linksys EA8500 WiFi Router"; + compatible = "linksys,ea8500", "qcom,ipq8064"; + + memory@0 { + reg = <0x42000000 0x1e000000>; + device_type = "memory"; + }; + + aliases { + mdio-gpio0 = &mdio0; + + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + wifi { + label = "wifi"; + gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + wps { + label = "green:wps"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + }; + + led_power: power { + label = "white:power"; + gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + wifi { + label = "green:wifi"; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&qcom_pinmux { + button_pins: button_pins { + mux { + pins = "gpio65", "gpio67", "gpio68"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio6", "gpio53", "gpio54"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; +}; + +&sata_phy { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&partitions { + partition@5f80000 { + label = "syscfg"; + reg = <0x5f80000 0x2080000>; + }; +}; + +&mdio0 { + phy4: ethernet-phy@4 { + reg = <4>; + }; +}; + +&gmac1 { + qcom,phy_mdio_addr = <4>; + qcom,poll_required = <1>; + qcom,rgmii_delay = <0>; + qcom,emulation = <0>; +}; + +/* LAN */ +&gmac2 { + qcom,phy_mdio_addr = <0>; /* none */ + qcom,poll_required = <0>; /* no polling */ + qcom,rgmii_delay = <0>; + qcom,emulation = <0>; +}; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi similarity index 67% rename from target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts rename to target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi index b94beeff42..98c4b2d29d 100644 --- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi @@ -1,79 +1,14 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT + #include "qcom-ipq8064-v2.0.dtsi" #include / { - model = "Linksys EA7500 V1 WiFi Router"; - compatible = "linksys,ea7500-v1", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0xe000000>; - device_type = "memory"; - }; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - chosen { bootargs = "console=ttyMSM0,115200n8"; - - append-rootblock = "ubi.mtd="; /* append to bootargs adding the root deviceblock nbr from bootloader */ - find-rootblock = "ubi.mtd="; /* look for root deviceblock nbr in this bootarg */ - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - led_power: power { - label = "white:power"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio65", "gpio68"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio6"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; + /* append to bootargs adding the root deviceblock nbr from bootloader */ + append-rootblock = "ubi.mtd="; }; }; @@ -87,6 +22,7 @@ &pcie0 { status = "okay"; + max-link-speed = <1>; }; @@ -197,7 +133,7 @@ partition@f80000 { label = "kernel1"; - reg = <0x0f80000 0x2800000>; /* 3 MB spill to rootfs*/ + reg = <0x0f80000 0x2800000>; /* 3 MB spill to rootfs */ }; partition@1280000 { @@ -214,16 +150,6 @@ label = "rootfs2"; reg = <0x3a80000 0x2500000>; }; - - partition@5f80000 { - label = "sysdiag"; - reg = <0x5f80000 0x100000>; - }; - - partition@6080000 { - label = "syscfg"; - reg = <0x6080000 0x1f80000>; - }; }; }; }; @@ -251,6 +177,7 @@ &gmac1 { status = "okay"; + phy-mode = "rgmii"; qcom,id = <1>; @@ -265,6 +192,7 @@ &gmac2 { status = "okay"; + phy-mode = "sgmii"; qcom,id = <2>; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-g10.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-g10.dts new file mode 100644 index 0000000000..45efb2b46f --- /dev/null +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-g10.dts @@ -0,0 +1,250 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-ipq8064-v2.0.dtsi" + +#include +#include + +/ { + compatible = "asrock,g10", "qcom,ipq8064"; + model = "ASRock G10"; + + aliases { + ethernet0 = &gmac1; + ethernet1 = &gmac0; + + led-boot = &led_status_blue; + led-failsafe = &led_status_amber; + led-running = &led_status_blue; + led-upgrade = &led_status_amber; + }; + + chosen { + bootargs-override = "console=ttyMSM0,115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + /* + * this is a bit misleading. Because there are about seven + * multicolor LEDs connected all wired together in parallel. + */ + + status_yellow { + label = "yellow:status"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + }; + + led_status_amber: status_amber { + label = "amber:status"; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; + }; + + led_status_blue: status_blue { + label = "blue:status"; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + }; + + /* + * LED is declared in vendors boardfile but it's not + * working and the manual doesn't mention anything + * about the LED being white. + + status_white { + label = "white:status"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; + }; + */ + }; + + i2c-gpio { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "i2c-gpio"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>, /* sda */ + <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; /* scl */ + i2c-gpio,delay-us = <5>; + i2c-gpio,scl-output-only; + + mcu@50 { + reg = <0x50>; + compatible = "sonix,sn8f25e21"; + }; + }; + + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + ir-remote { + label = "ir-remote"; + gpios = <&qcom_pinmux 15 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + + wps5g { + label = "wps5g"; + gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + + wps2g { + label = "wps2g"; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + }; +}; + +&adm_dma { + status = "okay"; +}; + +&gmac1 { + status = "okay"; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + phy-mode = "rgmii"; + qcom,id = <1>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&gmac2 { + status = "okay"; + + phy-mode = "sgmii"; + qcom,id = <2>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&gsbi4_serial { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; +}; + +&mdio0 { + status = "okay"; + + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + ethernet-phy@0 { + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0x6a545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + >; + }; +}; + +&nand_controller { + status = "okay"; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + nand@0 { + reg = <0>; + compatible = "qcom,nandcs"; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "qcom,smem-part"; + }; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&qcom_pinmux { + led_pins: led_pins { + mux { + pins = "gpio7", "gpio8", "gpio9", "gpio26"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + button_pins: button_pins { + mux { + pins = "gpio15", "gpio16", "gpio64", "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + uart0_pins: uart0_pins { + mux { + pins = "gpio10", "gpio11"; + function = "gsbi4"; + drive-strength = <10>; + bias-disable; + }; + }; +}; + +&rpm { + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&tcsr { + qcom,usb-ctrl-select = ; +}; + +/delete-node/ &pcie2_pins; +/delete-node/ &pcie2; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500.dts similarity index 100% rename from target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500.dts rename to target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500.dts diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts similarity index 100% rename from target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts rename to target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-mtfi-m520.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-rg-mtfi-m520.dts similarity index 95% rename from target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-mtfi-m520.dts rename to target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-rg-mtfi-m520.dts index 817a6348e9..83f0162d5d 100644 --- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-mtfi-m520.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-rg-mtfi-m520.dts @@ -22,14 +22,6 @@ bootargs = "root=/dev/mmcblk0p3 rootfstype=squashfs,ext4 rootwait noinitrd"; }; - cpus { - idle-states { - CPU_SPC: spc { - status = "disabled"; - }; - }; - }; - keys { compatible = "gpio-keys"; pinctrl-0 = <&button_pins>; @@ -232,6 +224,14 @@ }; }; +&sata_phy { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + &usb3_0 { status = "okay"; }; @@ -242,16 +242,17 @@ &pcie0 { status = "okay"; - reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>; - /delete-property/ perst-gpios; + pinctrl-0 = <&pcie0_pins>; + pinctrl-names = "default"; }; &pcie1 { status = "okay"; - reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>; - /delete-property/ perst-gpios; + pinctrl-0 = <&pcie1_pins>; + pinctrl-names = "default"; + max-link-speed = <1>; }; &mdio0 { @@ -314,3 +315,7 @@ &adm_dma { status = "okay"; }; + +&CPU_SPC { + status = "disabled"; +}; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts new file mode 100644 index 0000000000..d6ac1fef1d --- /dev/null +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts @@ -0,0 +1,301 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq8064-v2.0.dtsi" + +#include +#include + +/ { + model = "Ubiquiti UniFi AC HD"; + compatible = "ubnt,unifi-ac-hd", "qcom,ipq8064"; + + aliases { + label-mac-device = &gmac2; + led-boot = &led_dome_white; + led-failsafe = &led_dome_white; + led-running = &led_dome_blue; + led-upgrade = &led_dome_blue; + mdio-gpio0 = &mdio0; + ethernet0 = &gmac2; + ethernet1 = &gmac1; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + led_dome_blue: dome_blue { + label = "blue:dome"; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + }; + + led_dome_white: dome_white { + label = "white:dome"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + }; +}; + +&qcom_pinmux { + button_pins: button_pins { + mux { + pins = "gpio68"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio9", "gpio53"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + output-low; + }; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + drive-strength = <10>; + bias-none; + }; + + cs { + pins = "gpio20"; + drive-strength = <12>; + }; + }; +}; + +&CPU_SPC { + status = "disabled"; +}; + +&gsbi5 { + status = "okay"; + + qcom,mode = ; + + spi@1a280000 { + status = "okay"; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + cs-gpios = <&qcom_pinmux 20 0>; + + flash@0 { + compatible = "mx25u25635f", "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SBL1"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@20000 { + label = "MIBIB"; + reg = <0x20000 0x10000>; + read-only; + }; + + partition@30000 { + label = "SBL2"; + reg = <0x30000 0x20000>; + read-only; + }; + + partition@50000 { + label = "SBL3"; + reg = <0x50000 0x30000>; + read-only; + }; + + partition@80000 { + label = "DDRCONFIG"; + reg = <0x80000 0x10000>; + read-only; + }; + + partition@90000 { + label = "SSD"; + reg = <0x90000 0x10000>; + read-only; + }; + + partition@a0000 { + label = "TZ"; + reg = <0xa0000 0x30000>; + read-only; + }; + + partition@d0000 { + label = "RPM"; + reg = <0xd0000 0x20000>; + read-only; + }; + + partition@f0000 { + label = "APPSBL"; + reg = <0xf0000 0xc0000>; + read-only; + }; + + partition@1b0000 { + label = "APPSBLENV"; + reg = <0x1b0000 0x10000>; + read-only; + }; + + eeprom: partition@1c0000 { + label = "EEPROM"; + reg = <0x1c0000 0x10000>; + read-only; + }; + + partition@1d0000 { + label = "bootselect"; + reg = <0x1d0000 0x10000>; + }; + + partition@1e0000 { + compatible = "denx,fit"; + label = "firmware"; + reg = <0x1e0000 0xe70000>; + }; + + partition@1050000 { + label = "kernel1"; + reg = <0x1050000 0xe70000>; + read-only; + }; + + partition@1ec0000 { + label = "debug"; + reg = <0x1ec0000 0x100000>; + read-only; + }; + + partition@1fc0000 { + label = "cfg"; + reg = <0x1fc0000 0x40000>; + read-only; + }; + }; + }; + }; +}; + +&adm_dma { + status = "okay"; +}; + +&nand_controller { + status = "okay"; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + nand-ecc-strength = <4>; + nand-bus-width = <8>; +}; + +&mdio0 { + status = "okay"; + + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + phy4: ethernet-phy@4 { + reg = <4>; + }; + + phy5: ethernet-phy@5 { + reg = <5>; + }; +}; + +&gmac1 { + status = "okay"; + + mdiobus = <&mdio0>; + phy-handle = <&phy5>; + phy-mode = "sgmii"; + qcom,id = <1>; + + mtd-mac-address = <&eeprom 0x6>; +}; + +&gmac2 { + status = "okay"; + + mdiobus = <&mdio0>; + phy-handle = <&phy4>; + phy-mode = "sgmii"; + qcom,id = <2>; + + mtd-mac-address = <&eeprom 0x0>; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&tcsr { + status = "okay"; +}; + +&hs_phy_0 { + status = "okay"; +}; + +&ss_phy_0 { + status = "okay"; +}; + +&usb3_0 { + status = "okay"; +}; + +&hs_phy_1 { + status = "okay"; +}; + +&ss_phy_1 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi similarity index 100% rename from target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi rename to target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts similarity index 100% rename from target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts rename to target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts similarity index 99% rename from target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts rename to target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts index 952194bc75..635e9fc8f9 100644 --- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts @@ -127,6 +127,10 @@ }; }; +&CPU_SPC { + status = "disabled"; +}; + &adm_dma { status = "okay"; }; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts similarity index 82% rename from target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts rename to target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts index b8f5017a2d..ec5d5047aa 100644 --- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts @@ -1,34 +1,8 @@ +// SPDX-License-Identifier: BSD-3-Clause /* - * BSD LICENSE - * * Copyright (C) 2017 Christian Mehlis * Copyright (C) 2018 Mathias Kresin * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the names of the copyright holders nor the names of any - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include "qcom-ipq8064-v1.0.dtsi" diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts similarity index 100% rename from target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts rename to target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts similarity index 100% rename from target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts rename to target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts similarity index 100% rename from target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-r7800.dts rename to target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi similarity index 100% rename from target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi rename to target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8068-ecw5410.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8068-ecw5410.dts new file mode 100644 index 0000000000..43bed451cb --- /dev/null +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8068-ecw5410.dts @@ -0,0 +1,341 @@ +#include "qcom-ipq8064-v2.0.dtsi" + +#include +#include + +/ { + model = "Edgecore ECW5410"; + compatible = "edgecore,ecw5410", "qcom,ipq8064"; + + reserved-memory { + nss@40000000 { + reg = <0x40000000 0x1000000>; + no-map; + }; + + smem: smem@41000000 { + reg = <0x41000000 0x200000>; + no-map; + }; + + wifi_dump@44000000 { + reg = <0x44000000 0x600000>; + no-map; + }; + }; + + cpus { + idle-states { + CPU_SPC: spc { + status = "disabled"; + }; + }; + }; + + aliases { + serial1 = &gsbi1_serial; + mdio-gpio0 = &mdio0; + ethernet0 = &gmac3; + ethernet1 = &gmac2; + + led-boot = &led_power_green; + led-failsafe = &led_power_red; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + + chosen { + bootargs-append = " console=ttyMSM0,115200n8 root=/dev/ubiblock0_1"; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + led_power_green: power_green { + label = "green:power"; + gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>; + }; + + wlan2g_green { + label = "green:wlan2g"; + gpios = <&qcom_pinmux 23 GPIO_ACTIVE_LOW>; + }; + + wlan2g_yellow { + label = "yellow:wlan2g"; + gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>; + }; + + wlan5g_green { + label = "green:wlan5g"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; + }; + + led_power_red: power_red { + label = "red:power"; + gpios = <&qcom_pinmux 28 GPIO_ACTIVE_LOW>; + }; + + wlan5g_yellow { + label = "yellow:wlan5g"; + gpios = <&qcom_pinmux 59 GPIO_ACTIVE_LOW>; + }; + }; +}; + + +&qcom_pinmux { + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19"; + function = "gsbi5"; + drive-strength = <10>; + bias-pull-down; + }; + + clk { + pins = "gpio21"; + function = "gsbi5"; + drive-strength = <12>; + bias-pull-down; + }; + + cs { + pins = "gpio20"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio16", "gpio23", "gpio24", "gpio26", + "gpio28", "gpio59"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + button_pins: button_pins { + mux { + pins = "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + uart1_pins: uart1_pins { + mux { + pins = "gpio51", "gpio52", "gpio53", "gpio54"; + function = "gsbi1"; + drive-strength = <12>; + bias-none; + }; + }; +}; + +&gsbi1 { + qcom,mode = ; + status = "okay"; + + serial@12450000 { + status = "okay"; + + pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + }; +}; + +&gsbi5 { + qcom,mode = ; + status = "okay"; + + spi4: spi@1a280000 { + status = "okay"; + spi-max-frequency = <50000000>; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; + + m25p80@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + partitions { + compatible = "qcom,smem-part"; + }; + }; + }; +}; + +&hs_phy_0 { /* USB3 port 0 HS phy */ + status = "okay"; +}; + +&hs_phy_1 { /* USB3 port 1 HS phy */ + status = "okay"; +}; + +&ss_phy_0 { /* USB3 port 0 SS phy */ + status = "okay"; +}; + +&ss_phy_1 { /* USB3 port 1 SS phy */ + status = "okay"; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; + + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + /delete-property/ perst-gpios; + + bridge@0,0 { + reg = <0x00000000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi@1,0 { + compatible = "qcom,ath10k"; + status = "okay"; + reg = <0x00010000 0 0 0 0>; + qcom,ath10k-calibration-variant = "Edgecore-ECW5410-L"; + }; + }; +}; + +&pcie2 { + status = "okay"; + + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + /delete-property/ perst-gpios; + + bridge@0,0 { + reg = <0x00000000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi@1,0 { + compatible = "qcom,ath10k"; + status = "okay"; + reg = <0x00010000 0 0 0 0>; + qcom,ath10k-calibration-variant = "Edgecore-ECW5410-L"; + }; + }; +}; + +&nand_controller { + status = "okay"; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + nand@0 { + compatible = "qcom,nandcs"; + + reg = <0>; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + rootfs1@0 { + label = "rootfs1"; + reg = <0x0000000 0x4000000>; + }; + + rootfs2@4000000 { + label = "rootfs2"; + reg = <0x4000000 0x4000000>; + }; + }; + }; +}; + +&soc { + mdio1: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + +&gmac2 { + status = "okay"; + + qcom,id = <2>; + mdiobus = <&mdio0>; + + phy-mode = "sgmii"; + phy-handle = <&phy1>; +}; + +&gmac3 { + status = "okay"; + + qcom,id = <3>; + mdiobus = <&mdio1>; + + phy-mode = "sgmii"; + phy-handle = <&phy0>; +}; + +&adm_dma { + status = "okay"; +}; diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile index 9d7ee22ee7..4a3f43eb36 100644 --- a/target/linux/ipq806x/image/Makefile +++ b/target/linux/ipq806x/image/Makefile @@ -3,6 +3,9 @@ include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/image.mk +DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID +DEVICE_VARS += TPLINK_BOARD_ID + define Build/buffalo-rootfs-cksum ( \ echo -ne "\x$$(od -A n -t u1 $@ | tr -s ' ' '\n' | \ @@ -10,13 +13,25 @@ define Build/buffalo-rootfs-cksum ) >> $@ endef +define Build/edimax-header + $(eval edimax_model=$(word 1,$(1))) + + $(STAGING_DIR_HOST)/bin/mkedimaximg \ + -b -s CSYS -m $(edimax_model) \ + -f 0x70000 -S 0x1200000 \ + -i $@ -o $@.new + @mv $@.new $@ +endef + define Device/Default PROFILES := Default KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts) KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs KERNEL_PREFIX := $$(IMAGE_PREFIX) KERNEL_LOADADDR = 0x42208000 + DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1))) DEVICE_DTS_CONFIG := config@1 + IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata IMAGE/sysupgrade.bin/squashfs := endef @@ -53,42 +68,53 @@ define Device/DniImage NETGEAR_BOARD_ID := NETGEAR_HW_ID := UBINIZE_OPTS := -E 5 - IMAGES := factory.img sysupgrade.bin + IMAGES += factory.img IMAGE/factory.img := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | netgear-dni IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | sysupgrade-tar kernel=$$$$@ | append-metadata endef -DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID define Device/TpSafeImage KERNEL_SUFFIX := -uImage KERNEL = kernel-bin | append-dtb | uImage none KERNEL_NAME := zImage TPLINK_BOARD_ID := - IMAGES := factory.bin sysupgrade.bin + IMAGES += factory.bin IMAGE/factory.bin := append-rootfs | tplink-safeloader factory IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | append-metadata endef -DEVICE_VARS += TPLINK_BOARD_ID define Device/ZyXELImage KERNEL_SUFFIX := -uImage - KERNEL = kernel-bin | append-dtb | uImage none | pad-to $${KERNEL_SIZE} + KERNEL = kernel-bin | append-dtb | uImage none | pad-to $$(KERNEL_SIZE) KERNEL_NAME := zImage - IMAGES := factory.bin sysupgrade.bin + IMAGES += factory.bin IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to $$$$(BLOCKSIZE) | zyxel-ras-image separate-kernel - IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to $$$${BLOCKSIZE} | sysupgrade-tar rootfs=$$$$@ | append-metadata + IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to $$$$(BLOCKSIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata endef +define Device/asrock_g10 + $(call Device/FitImage) + $(call Device/UbiFit) + SOC := qcom-ipq8064 + DEVICE_VENDOR := ASRock + DEVICE_MODEL := G10 + BLOCKSIZE := 128k + PAGESIZE := 2048 + KERNEL_SIZE := 5332k + DEVICE_PACKAGES := kmod-i2c-gpio ath10k-firmware-qca99x0-ct + IMAGE/nand-factory.bin := append-ubi | edimax-header RN67 +endef +TARGET_DEVICES += asrock_g10 + define Device/buffalo_wxr-2533dhp $(call Device/LegacyImage) + SOC := qcom-ipq8064 DEVICE_VENDOR := Buffalo DEVICE_MODEL := WXR-2533DHP - DEVICE_DTS := qcom-ipq8064-wxr-2533dhp BLOCKSIZE := 128k PAGESIZE := 2048 IMAGE_SIZE := 65536k KERNEL_IN_UBI := 1 - IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin := append-rootfs | buffalo-rootfs-cksum | \ sysupgrade-tar rootfs=$$$$@ | append-metadata DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct @@ -100,19 +126,32 @@ define Device/compex_wpq864 $(call Device/UbiFit) DEVICE_VENDOR := Compex DEVICE_MODEL := WPQ864 - DEVICE_DTS := qcom-ipq8064-wpq864 BLOCKSIZE := 128k PAGESIZE := 2048 + SOC := qcom-ipq8064 DEVICE_PACKAGES := kmod-gpio-beeper endef TARGET_DEVICES += compex_wpq864 +define Device/edgecore_ecw5410 + $(call Device/FitImage) + $(call Device/UbiFit) + DEVICE_VENDOR := Edgecore + DEVICE_MODEL := ECW5410 + SOC := qcom-ipq8068 + BLOCKSIZE := 128k + PAGESIZE := 2048 + DEVICE_DTS_CONFIG := config@v2.0-ap160 + DEVICE_PACKAGES := ath10k-firmware-qca9984-ct ipq-wifi-edgecore_ecw5410 +endef +TARGET_DEVICES += edgecore_ecw5410 + define Device/linksys_ea7500-v1 $(call Device/LegacyImage) DEVICE_VENDOR := Linksys DEVICE_MODEL := EA7500 DEVICE_VARIANT := v1 - DEVICE_DTS := qcom-ipq8064-ea7500-v1 + SOC := qcom-ipq8064 PAGESIZE := 2048 BLOCKSIZE := 128k KERNEL_SIZE := 3072k @@ -128,7 +167,7 @@ define Device/linksys_ea8500 $(call Device/LegacyImage) DEVICE_VENDOR := Linksys DEVICE_MODEL := EA8500 - DEVICE_DTS := qcom-ipq8064-ea8500 + SOC := qcom-ipq8064 PAGESIZE := 2048 BLOCKSIZE := 128k KERNEL_SIZE := 3072k @@ -136,8 +175,8 @@ define Device/linksys_ea8500 BOARD_NAME := ea8500 SUPPORTED_DEVICES += ea8500 UBINIZE_OPTS := -E 5 - IMAGES := factory.bin sysupgrade.bin - IMAGE/factory.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-ubi + IMAGES += factory.bin + IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct endef TARGET_DEVICES += linksys_ea8500 @@ -146,20 +185,33 @@ define Device/nec_wg2600hp $(call Device/LegacyImage) DEVICE_VENDOR := NEC DEVICE_MODEL := Aterm WG2600HP - DEVICE_DTS := qcom-ipq8064-wg2600hp + SOC := qcom-ipq8064 BLOCKSIZE := 64k BOARD_NAME := wg2600hp - IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct endef TARGET_DEVICES += nec_wg2600hp +define Device/nec_wg2600hp3 + $(call Device/LegacyImage) + DEVICE_VENDOR := NEC Platforms + DEVICE_MODEL := Aterm WG2600HP3 + SOC := qcom-ipq8062 + BLOCKSIZE := 64k + IMAGES := sysupgrade.bin + IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata + DEVICE_PACKAGES := -kmod-ata-ahci -kmod-ata-ahci-platform -kmod-usb-ohci -kmod-usb2 \ + -kmod-usb-ledtrig-usbport -kmod-usb-phy-qcom-dwc3 -kmod-usb3 -kmod-usb-dwc3-qcom \ + ath10k-firmware-qca9984-ct ipq-wifi-nec_wg2600hp3 +endef +TARGET_DEVICES += nec_wg2600hp3 + define Device/netgear_d7800 $(call Device/DniImage) DEVICE_VENDOR := NETGEAR DEVICE_MODEL := Nighthawk X4 D7800 - DEVICE_DTS := qcom-ipq8064-d7800 + SOC := qcom-ipq8064 KERNEL_SIZE := 4096k NETGEAR_BOARD_ID := D7800 NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4 @@ -176,7 +228,7 @@ define Device/netgear_r7500 DEVICE_VENDOR := NETGEAR DEVICE_MODEL := Nighthawk X4 R7500 DEVICE_VARIANT := v1 - DEVICE_DTS := qcom-ipq8064-r7500 + SOC := qcom-ipq8064 KERNEL_SIZE := 4096k NETGEAR_BOARD_ID := R7500 NETGEAR_HW_ID := 29764841+0+128+256+3x3+4x4 @@ -193,7 +245,7 @@ define Device/netgear_r7500v2 DEVICE_VENDOR := NETGEAR DEVICE_MODEL := Nighthawk X4 R7500 DEVICE_VARIANT := v2 - DEVICE_DTS := qcom-ipq8064-r7500v2 + SOC := qcom-ipq8064 KERNEL_SIZE := 4096k NETGEAR_BOARD_ID := R7500v2 NETGEAR_HW_ID := 29764958+0+128+512+3x3+4x4 @@ -209,7 +261,7 @@ define Device/netgear_r7800 $(call Device/DniImage) DEVICE_VENDOR := NETGEAR DEVICE_MODEL := Nighthawk X4S R7800 - DEVICE_DTS := qcom-ipq8065-r7800 + SOC := qcom-ipq8065 KERNEL_SIZE := 4096k NETGEAR_BOARD_ID := R7800 NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4+cascade @@ -227,6 +279,7 @@ define Device/qcom_ipq8064-ap148 DEVICE_VENDOR := Qualcomm DEVICE_MODEL := AP148 DEVICE_VARIANT := standard + SOC := qcom-ipq8064 DEVICE_DTS := qcom-ipq8064-ap148 KERNEL_INSTALL := 1 BLOCKSIZE := 128k @@ -243,6 +296,7 @@ define Device/qcom_ipq8064-ap148-legacy DEVICE_VENDOR := Qualcomm DEVICE_MODEL := AP148 DEVICE_VARIANT := legacy + SOC := qcom-ipq8064 DEVICE_DTS := qcom-ipq8064-ap148 BLOCKSIZE := 128k PAGESIZE := 2048 @@ -257,6 +311,7 @@ define Device/qcom_ipq8064-ap161 $(call Device/UbiFit) DEVICE_VENDOR := Qualcomm DEVICE_MODEL := AP161 + SOC := qcom-ipq8064 DEVICE_DTS := qcom-ipq8064-ap161 KERNEL_INSTALL := 1 BLOCKSIZE := 128k @@ -270,6 +325,7 @@ define Device/qcom_ipq8064-db149 $(call Device/FitImage) DEVICE_VENDOR := Qualcomm DEVICE_MODEL := DB149 + SOC := qcom-ipq8064 DEVICE_DTS := qcom-ipq8064-db149 KERNEL_INSTALL := 1 BOARD_NAME := db149 @@ -280,7 +336,7 @@ TARGET_DEVICES += qcom_ipq8064-db149 define Device/ruijie_rg-mtfi-m520 DEVICE_VENDOR := Ruijie DEVICE_MODEL := RG-MTFi-M520 - DEVICE_DTS := qcom-ipq8064-mtfi-m520 + SOC := qcom-ipq8064 KERNEL_SIZE := 4096k BLOCKSIZE := 64k BOARD_NAME := rg-mtfi-m520 @@ -297,12 +353,28 @@ define Device/ruijie_rg-mtfi-m520 endef TARGET_DEVICES += ruijie_rg-mtfi-m520 +define Device/tplink_ad7200 + $(call Device/TpSafeImage) + DEVICE_VENDOR := TP-Link + DEVICE_MODEL := AD7200 + DEVICE_VARIANT := v1/v2 + DEVICE_ALT0_VENDOR := TP-Link + DEVICE_ALT0_MODEL := Talon AD7200 + DEVICE_ALT0_VARIANT := v1/v2 + SOC := qcom-ipq8064 + BLOCKSIZE := 128k + PAGESIZE := 2048 + TPLINK_BOARD_ID := AD7200 + DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct kmod-wil6210 +endef +TARGET_DEVICES += tplink_ad7200 + define Device/tplink_c2600 $(call Device/TpSafeImage) DEVICE_VENDOR := TP-Link DEVICE_MODEL := Archer C2600 DEVICE_VARIANT := v1 - DEVICE_DTS := qcom-ipq8064-c2600 + SOC := qcom-ipq8064 BLOCKSIZE := 128k PAGESIZE := 2048 BOARD_NAME := c2600 @@ -316,25 +388,36 @@ define Device/tplink_vr2600v DEVICE_VENDOR := TP-Link DEVICE_MODEL := Archer VR2600v DEVICE_VARIANT := v1 - DEVICE_DTS := qcom-ipq8064-vr2600v KERNEL_SUFFIX := -uImage KERNEL = kernel-bin | append-dtb | uImage none KERNEL_NAME := zImage KERNEL_SIZE := 3072k + SOC := qcom-ipq8064 BLOCKSIZE := 128k PAGESIZE := 2048 BOARD_NAME := vr2600v SUPPORTED_DEVICES += vr2600v DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct - IMAGES := sysupgrade.bin - IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata + IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata endef TARGET_DEVICES += tplink_vr2600v +define Device/ubnt_unifi-ac-hd + $(call Device/FitImageLzma) + DEVICE_VENDOR := Ubiquiti + DEVICE_MODEL := UniFi AC HD + SOC := qcom-ipq8064 + BLOCKSIZE := 64k + IMAGE_SIZE := 14784k + DEVICE_PACKAGES := ath10k-firmware-qca9984-ct + IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata | check-size +endef +TARGET_DEVICES += ubnt_unifi-ac-hd + define Device/zyxel_nbg6817 DEVICE_VENDOR := ZyXEL DEVICE_MODEL := NBG6817 - DEVICE_DTS := qcom-ipq8065-nbg6817 + SOC := qcom-ipq8065 KERNEL_SIZE := 4096k BLOCKSIZE := 64k BOARD_NAME := nbg6817 diff --git a/target/linux/ipq806x/patches-5.10/0069-arm-boot-add-dts-files.patch b/target/linux/ipq806x/patches-5.10/0069-arm-boot-add-dts-files.patch index ba9c70cedd..55c6fe346b 100644 --- a/target/linux/ipq806x/patches-5.10/0069-arm-boot-add-dts-files.patch +++ b/target/linux/ipq806x/patches-5.10/0069-arm-boot-add-dts-files.patch @@ -10,27 +10,30 @@ Signed-off-by: John Crispin --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -907,8 +907,23 @@ dtb-$(CONFIG_ARCH_QCOM) += \ +@@ -907,8 +907,26 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq4019-ap.dk04.1-c3.dtb \ qcom-ipq4019-ap.dk07.1-c1.dtb \ qcom-ipq4019-ap.dk07.1-c2.dtb \ + qcom-ipq8062-wg2600hp3.dtb \ qcom-ipq8064-ap148.dtb \ qcom-ipq8064-rb3011.dtb \ -+ qcom-ipq8064-ap161.dtb \ + qcom-ipq8064-c2600.dtb \ + qcom-ipq8064-d7800.dtb \ + qcom-ipq8064-db149.dtb \ ++ qcom-ipq8064-ap161.dtb \ + qcom-ipq8064-ea7500-v1.dtb \ + qcom-ipq8064-ea8500.dtb \ -+ qcom-ipq8064-mtfi-m520.dtb \ ++ qcom-ipq8064-g10.dtb \ + qcom-ipq8064-r7500.dtb \ + qcom-ipq8064-r7500v2.dtb \ ++ qcom-ipq8064-rg-mtfi-m520.dtb \ ++ qcom-ipq8064-unifi-ac-hd.dtb \ + qcom-ipq8064-wg2600hp.dtb \ + qcom-ipq8064-wpq864.dtb \ + qcom-ipq8064-wxr-2533dhp.dtb \ + qcom-ipq8065-nbg6817.dtb \ + qcom-ipq8065-r7800.dtb \ ++ qcom-ipq8068-ecw5410.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8974-fairphone-fp2.dtb \ diff --git a/target/linux/ipq806x/patches-5.4/0069-arm-boot-add-dts-files.patch b/target/linux/ipq806x/patches-5.4/0069-arm-boot-add-dts-files.patch index 29d8ac2a6c..6a6f59c8bd 100644 --- a/target/linux/ipq806x/patches-5.4/0069-arm-boot-add-dts-files.patch +++ b/target/linux/ipq806x/patches-5.4/0069-arm-boot-add-dts-files.patch @@ -10,25 +10,29 @@ Signed-off-by: John Crispin --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -842,7 +842,21 @@ dtb-$(CONFIG_ARCH_QCOM) += \ +@@ -842,7 +842,25 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq4019-ap.dk04.1-c3.dtb \ qcom-ipq4019-ap.dk07.1-c1.dtb \ qcom-ipq4019-ap.dk07.1-c2.dtb \ ++ qcom-ipq8062-wg2600hp3.dtb \ qcom-ipq8064-ap148.dtb \ -+ qcom-ipq8064-ap161.dtb \ + qcom-ipq8064-c2600.dtb \ + qcom-ipq8064-d7800.dtb \ + qcom-ipq8064-db149.dtb \ ++ qcom-ipq8064-ap161.dtb \ + qcom-ipq8064-ea7500-v1.dtb \ + qcom-ipq8064-ea8500.dtb \ -+ qcom-ipq8064-mtfi-m520.dtb \ ++ qcom-ipq8064-g10.dtb \ + qcom-ipq8064-r7500.dtb \ + qcom-ipq8064-r7500v2.dtb \ ++ qcom-ipq8064-rg-mtfi-m520.dtb \ ++ qcom-ipq8064-unifi-ac-hd.dtb \ + qcom-ipq8064-wg2600hp.dtb \ + qcom-ipq8064-wpq864.dtb \ + qcom-ipq8064-wxr-2533dhp.dtb \ + qcom-ipq8065-nbg6817.dtb \ + qcom-ipq8065-r7800.dtb \ ++ qcom-ipq8068-ecw5410.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8974-fairphone-fp2.dtb \ diff --git a/target/linux/ipq806x/patches-5.4/900-arm-add-cmdline-override.patch b/target/linux/ipq806x/patches-5.4/900-arm-add-cmdline-override.patch new file mode 100644 index 0000000000..49cd68b68d --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/900-arm-add-cmdline-override.patch @@ -0,0 +1,37 @@ +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -1840,6 +1840,14 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGL + + endchoice + ++config CMDLINE_OVERRIDE ++ bool "Use alternative cmdline from device tree" ++ help ++ Some bootloaders may have uneditable bootargs. While CMDLINE_FORCE can ++ be used, this is not a good option for kernels that are shared across ++ devices. This setting enables using "chosen/cmdline-override" as the ++ cmdline if it exists in the device tree. ++ + config CMDLINE + string "Default kernel command string" + default "" +--- a/drivers/of/fdt.c ++++ b/drivers/of/fdt.c +@@ -1060,6 +1060,17 @@ int __init early_init_dt_scan_chosen(uns + if (p != NULL && l > 0) + strlcpy(data, p, min(l, COMMAND_LINE_SIZE)); + ++ /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different ++ * device tree option of chosen/bootargs-override. This is ++ * helpful on boards where u-boot sets bootargs, and is unable ++ * to be modified. ++ */ ++#ifdef CONFIG_CMDLINE_OVERRIDE ++ p = of_get_flat_dt_prop(node, "bootargs-override", &l); ++ if (p != NULL && l > 0) ++ strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE)); ++#endif ++ + /* + * CONFIG_CMDLINE is meant to be a default in case nothing else + * managed to set the command line, unless CONFIG_CMDLINE_FORCE diff --git a/target/linux/ipq806x/patches-5.4/997-device_tree_cmdline.patch b/target/linux/ipq806x/patches-5.4/997-device_tree_cmdline.patch index 3cc032fdd2..b6b1b04765 100644 --- a/target/linux/ipq806x/patches-5.4/997-device_tree_cmdline.patch +++ b/target/linux/ipq806x/patches-5.4/997-device_tree_cmdline.patch @@ -8,5 +8,5 @@ + if (p != NULL && l > 0) + strlcat(data, p, min_t(int, strlen(data) + (int)l, COMMAND_LINE_SIZE)); - /* - * CONFIG_CMDLINE is meant to be a default in case nothing else + /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different + * device tree option of chosen/bootargs-override. This is