diff --git a/include/autotools.mk b/include/autotools.mk
index cba36ccd9f..c378efe6f9 100644
--- a/include/autotools.mk
+++ b/include/autotools.mk
@@ -124,13 +124,6 @@ ifneq ($(filter libtool-abiver,$(PKG_FIXUP)),)
   Hooks/Configure/Post += set_libtool_abiver
 endif
 
-ifneq ($(filter libtool-ucxx,$(PKG_FIXUP)),)
-  PKG_BUILD_DEPENDS += libtool
- ifeq ($(filter no-autoreconf,$(PKG_FIXUP)),)
-  Hooks/Configure/Pre += autoreconf_target
- endif
-endif
-
 ifneq ($(filter autoreconf,$(PKG_FIXUP)),)
   ifeq ($(filter autoreconf,$(Hooks/Configure/Pre)),)
     Hooks/Configure/Pre += autoreconf_target
@@ -166,12 +159,6 @@ ifneq ($(filter libtool,$(HOST_FIXUP)),)
  endif
 endif
 
-ifneq ($(filter libtool-ucxx,$(HOST_FIXUP)),)
- ifeq ($(filter no-autoreconf,$(HOST_FIXUP)),)
-  Hooks/HostConfigure/Pre += autoreconf_host
- endif
-endif
-
 ifneq ($(filter autoreconf,$(HOST_FIXUP)),)
   ifeq ($(filter autoreconf,$(Hooks/HostConfigure/Pre)),)
     Hooks/HostConfigure/Pre += autoreconf_host
diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79
index b968fa8fde..c7049f7029 100644
--- a/package/boot/uboot-envtools/files/ath79
+++ b/package/boot/uboot-envtools/files/ath79
@@ -88,6 +88,18 @@ ziking,cpe46b|\
 zyxel,nbg6616)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"
 	;;
+aruba,ap-105|\
+aruba,ap-175|\
+dongwon,dw02-412h-64m|\
+dongwon,dw02-412h-128m|\
+glinet,gl-ar300m-lite|\
+glinet,gl-ar300m-nand|\
+glinet,gl-ar300m-nor|\
+glinet,gl-ar300m16)
+	idx="$(find_mtd_index u-boot-env)"
+	[ -n "$idx" ] && \
+		ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x10000" "0x10000"
+	;;
 buffalo,wzr-hp-ag300h)
 	ubootenv_add_uci_config "/dev/mtd3" "0x0" "0x10000" "0x10000"
 	;;
@@ -99,16 +111,6 @@ linksys,ea4500-v3)
 domywifi,dw33d)
 	ubootenv_add_uci_config "/dev/mtd4" "0x0" "0x10000" "0x10000"
 	;;
-dongwon,dw02-412h-64m|\
-dongwon,dw02-412h-128m|\
-glinet,gl-ar300m-lite|\
-glinet,gl-ar300m-nand|\
-glinet,gl-ar300m-nor|\
-glinet,gl-ar300m16)
-	idx="$(find_mtd_index u-boot-env)"
-	[ -n "$idx" ] && \
-		ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x10000" "0x10000"
-	;;
 glinet,gl-ar150)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x8000" "0x10000"
 	;;
diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips
index 6a0256c568..bc56210036 100644
--- a/package/boot/uboot-envtools/files/ramips
+++ b/package/boot/uboot-envtools/files/ramips
@@ -19,7 +19,8 @@ alfa-network,r36m-e4g|\
 alfa-network,tube-e4g|\
 engenius,epg600|\
 engenius,esr600h|\
-sitecom,wlr-4100-v1-002)
+sitecom,wlr-4100-v1-002|\
+zyxel,keenetic-lite-iii-a)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x1000"
 	;;
 arcadyan,we420223-99)
diff --git a/package/kernel/mac80211/patches/subsys/329-wifi-mac80211-fix-receiving-mesh-packets-in-forwardi.patch b/package/kernel/mac80211/patches/subsys/329-wifi-mac80211-fix-receiving-mesh-packets-in-forwardi.patch
new file mode 100644
index 0000000000..6882694da8
--- /dev/null
+++ b/package/kernel/mac80211/patches/subsys/329-wifi-mac80211-fix-receiving-mesh-packets-in-forwardi.patch
@@ -0,0 +1,50 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Sun, 26 Mar 2023 17:11:34 +0200
+Subject: [PATCH] wifi: mac80211: fix receiving mesh packets in forwarding=0
+ networks
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+When forwarding is set to 0, frames are typically sent with ttl=1.
+Move the ttl decrement check below the check for local receive in order to
+fix packet drops.
+
+Reported-by: Thomas Hühn <thomas.huehn@hs-nordhausen.de>
+Reported-by: Nick Hainke <vincent@systemli.org>
+Fixes: 986e43b19ae9 ("wifi: mac80211: fix receiving A-MSDU frames on mesh interfaces")
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/net/mac80211/rx.c
++++ b/net/mac80211/rx.c
+@@ -2828,14 +2828,6 @@ ieee80211_rx_mesh_data(struct ieee80211_
+ 	if (sdata->crypto_tx_tailroom_needed_cnt)
+ 		tailroom = IEEE80211_ENCRYPT_TAILROOM;
+ 
+-	if (!--mesh_hdr->ttl) {
+-		if (multicast)
+-			goto rx_accept;
+-
+-		IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_ttl);
+-		return RX_DROP_MONITOR;
+-	}
+-
+ 	if (mesh_hdr->flags & MESH_FLAGS_AE) {
+ 		struct mesh_path *mppath;
+ 		char *proxied_addr;
+@@ -2874,6 +2866,14 @@ ieee80211_rx_mesh_data(struct ieee80211_
+ 	if (ether_addr_equal(sdata->vif.addr, eth->h_dest))
+ 		goto rx_accept;
+ 
++	if (!--mesh_hdr->ttl) {
++		if (multicast)
++			goto rx_accept;
++
++		IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_ttl);
++		return RX_DROP_MONITOR;
++	}
++
+ 	if (!ifmsh->mshcfg.dot11MeshForwarding) {
+ 		if (is_multicast_ether_addr(eth->h_dest))
+ 			goto rx_accept;
diff --git a/rules.mk b/rules.mk
index a2f5bcca4b..57d7995d4f 100644
--- a/rules.mk
+++ b/rules.mk
@@ -252,6 +252,7 @@ TARGET_NM:=$(TARGET_CROSS)gcc-nm
 TARGET_CC:=$(TARGET_CROSS)gcc
 TARGET_CXX:=$(TARGET_CROSS)g++
 KPATCH:=$(SCRIPT_DIR)/patch-kernel.sh
+FILECMD:=$(STAGING_DIR_HOST)/bin/file
 SED:=$(STAGING_DIR_HOST)/bin/sed -i -e
 ESED:=$(STAGING_DIR_HOST)/bin/sed -E -i -e
 MKHASH:=$(STAGING_DIR_HOST)/bin/mkhash
diff --git a/target/linux/apm821xx/image/nand.mk b/target/linux/apm821xx/image/nand.mk
index db3c9c0722..1d28df98e5 100644
--- a/target/linux/apm821xx/image/nand.mk
+++ b/target/linux/apm821xx/image/nand.mk
@@ -51,7 +51,7 @@ define Device/meraki_mx60
   IMAGES := sysupgrade.bin
   DTB_SIZE := 20480
   IMAGE_SIZE := 1021m
-  KERNEL := kernel-bin | gzip | dtb | MuImage-initramfs gzip
+  KERNEL := kernel-bin | libdeflate-gzip | dtb | MuImage-initramfs gzip
   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
   UBINIZE_OPTS := -E 5
   DEVICE_COMPAT_VERSION := 2.0
@@ -70,7 +70,7 @@ define Device/netgear_wndap6x0
   IMAGE_SIZE := 27392k
   IMAGES := sysupgrade.bin factory.img
   KERNEL_SIZE := 6080k
-  KERNEL := dtb | kernel-bin | gzip | MuImage-initramfs gzip
+  KERNEL := dtb | kernel-bin | libdeflate-gzip | MuImage-initramfs gzip
   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
   IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
   UBINIZE_OPTS := -E 5
@@ -114,7 +114,7 @@ define Device/netgear_wndr4700
   # CHECK_DNI_FIRMWARE_ROOTFS_INTEGRITY in do_chk_dniimg()
   KERNEL := kernel-bin | lzma -d16 | uImage lzma | pad-offset $$(BLOCKSIZE) 64 | \
 	    append-uImage-fakehdr filesystem | dtb | create-uImage-dtb | prepend-dtb
-  KERNEL_INITRAMFS := kernel-bin | gzip | dtb | MuImage-initramfs gzip
+  KERNEL_INITRAMFS := kernel-bin | libdeflate-gzip | dtb | MuImage-initramfs gzip
   IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
 		       netgear-dni | check-size
   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
diff --git a/target/linux/apm821xx/image/sata.mk b/target/linux/apm821xx/image/sata.mk
index 138b992476..18a1229d34 100644
--- a/target/linux/apm821xx/image/sata.mk
+++ b/target/linux/apm821xx/image/sata.mk
@@ -12,14 +12,14 @@ define Device/wd_mybooklive
   SUPPORTED_DEVICES += mbl wd,mybooklive-duo
   BLOCKSIZE := 1k
   DTB_SIZE := 16384
-  KERNEL := kernel-bin | dtb | gzip | uImage gzip
-  KERNEL_INITRAMFS := kernel-bin | gzip | dtb | MuImage-initramfs gzip
+  KERNEL := kernel-bin | dtb | libdeflate-gzip | uImage gzip
+  KERNEL_INITRAMFS := kernel-bin | libdeflate-gzip | dtb | MuImage-initramfs gzip
   IMAGES := factory.img.gz sysupgrade.img.gz
   ARTIFACTS := apollo3g.dtb
   DEVICE_DTB := apollo3g.dtb
   FILESYSTEMS := ext4 squashfs
-  IMAGE/factory.img.gz := boot-script | boot-img | hdd-img | gzip
-  IMAGE/sysupgrade.img.gz := boot-script | boot-img | hdd-img | gzip | append-metadata
+  IMAGE/factory.img.gz := boot-script | boot-img | hdd-img | libdeflate-gzip
+  IMAGE/sysupgrade.img.gz := boot-script | boot-img | hdd-img | libdeflate-gzip | append-metadata
   ARTIFACT/apollo3g.dtb := export-dtb
 endef
 
diff --git a/target/linux/ath79/dts/ar7161_aruba_ap-175.dts b/target/linux/ath79/dts/ar7161_aruba_ap-175.dts
new file mode 100644
index 0000000000..dd29a687ba
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_aruba_ap-175.dts
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7100.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "aruba,ap-175", "qca,ar7161";
+	model = "Aruba AP-175";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	aliases {
+		led-boot = &led_power_amber;
+		led-failsafe = &led_power_amber;
+		led-upgrade = &led_power_amber;
+		label-mac-device = &eth0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* These internal LEDs cannot be seen when case is closed */
+		internal_2g_green {
+			label = "green:internal_2g";
+			gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		internal_5g_green {
+			label = "green:internal_5g";
+			gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+		};
+
+        /* These external LEDs are visible from the bottom panel */
+
+		led_power_amber: power_amber {
+			label = "amber:power";
+			gpios = <&gpio_ext 5 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+
+		r1_act_blue {
+			label = "blue:r1_act";
+			gpios = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy1tpt";
+		};
+
+		r1_rssi1_blue {
+			label = "blue:r1_rssi1";
+			gpios = <&gpio_ext 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		r1_rssi2_blue {
+			label = "blue:r1_rssi2";
+			gpios = <&gpio_ext 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		r1_rssi3_blue {
+			label = "blue:r1_rssi3";
+			gpios = <&gpio_ext 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		r1_rssi4_blue {
+			label = "blue:r1_rssi4";
+			gpios = <&gpio_ext 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		r0_act_amber {
+			label = "amber:r0_act";
+			gpios = <&gpio_ext 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		r0_rssi1_amber {
+			label = "amber:r0_rssi1";
+			gpios = <&gpio_ext 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		r0_rssi2_amber {
+			label = "amber:r0_rssi2";
+			gpios = <&gpio_ext 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		r0_rssi3_amber {
+			label = "amber:r0_rssi3";
+			gpios = <&gpio_ext 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		r0_rssi4_amber {
+			label = "amber:r0_rssi4";
+			gpios = <&gpio_ext 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	i2c0: i2c {
+		compatible = "i2c-gpio";
+		i2c-gpio,delay-us = <10>;
+		i2c-gpio,timeout-ms = <1>;
+		sda-gpios = <&gpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio 2 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+
+	ath9k0: wifi@0,11 {
+		compatible = "pci168c,0029";
+		nvmem-cells = <&macaddr_hwinfo_1c>;
+		nvmem-cell-names = "mac-address";
+		mac-address-increment = <1>;
+		reg = <0x8800 0 0 0 0>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	ath9k1: wifi@0,12 {
+		compatible = "pci168c,0029";
+		nvmem-cells = <&macaddr_hwinfo_1c>;
+		nvmem-cell-names = "mac-address";
+		mac-address-increment = <2>;
+		reg = <0x9000 0 0 0 0>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <0x1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	nvmem-cells = <&macaddr_hwinfo_1c>;
+	nvmem-cell-names = "mac-address";
+
+	phy-mode = "rgmii";
+	phy-handle = <&phy1>;
+};
+
+&spi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x000000 0x40000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "firmware";
+				reg = <0x40000 0xfa0000>;
+				compatible = "denx,uimage";
+			};
+
+			hwinfo: partition@fe0000 {
+				label = "hwinfo";
+				reg = <0xfe0000 0x10000>;
+				read-only;
+			};
+
+			partition@ff0000 {
+				label = "u-boot-env";
+				reg = <0xff0000 0x10000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&hwinfo {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_hwinfo_1c: macaddr@1c {
+		reg = <0x1c 0x6>;
+	};
+};
+
+&i2c0 {
+	gpio_ext: gpio@21 {
+		status = "okay";
+
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	temp-sensor@4a {
+		 compatible = "national,lm75";
+		 reg = <0x4a>;
+	};
+
+	eeprom@50 { /* 24lc2561 */
+		compatible = "atmel,24c256","at24";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x50>;
+		size = <256>;
+	};
+
+	ds1374c: rtc@68 {
+		status = "okay";
+
+		compatible = "dallas,ds1374";
+		reg = <0x68>;
+	};
+};
diff --git a/target/linux/ath79/dts/ar7161_dlink_dir-825-b1.dts b/target/linux/ath79/dts/ar7161_dlink_dir-825-b1.dts
index 6934a8f952..0e39be7d0b 100644
--- a/target/linux/ath79/dts/ar7161_dlink_dir-825-b1.dts
+++ b/target/linux/ath79/dts/ar7161_dlink_dir-825-b1.dts
@@ -139,7 +139,8 @@
 	ath9k0: wifi@0,11 {
 		compatible = "pci168c,0029";
 		reg = <0x8800 0 0 0 0>;
-		qca,no-eeprom;
+		nvmem-cells = <&macaddr_lan>, <&cal_art_1000>;
+		nvmem-cell-names = "mac-address-ascii", "calibration";
 		#gpio-cells = <2>;
 		gpio-controller;
 	};
@@ -147,7 +148,9 @@
 	ath9k1: wifi@0,12 {
 		compatible = "pci168c,0029";
 		reg = <0x9000 0 0 0 0>;
-		qca,no-eeprom;
+		nvmem-cells = <&macaddr_wan>, <&cal_art_5000>;
+		nvmem-cell-names = "mac-address-ascii", "calibration";
+		mac-address-increment = <1>;
 		#gpio-cells = <2>;
 		gpio-controller;
 	};
@@ -184,9 +187,28 @@
 			};
 
 			partition@660000 {
+				compatible = "nvmem-cells";
 				label = "caldata";
 				reg = <0x660000 0x010000>;
 				read-only;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				cal_art_1000: cal@1000 {
+					reg = <0x1000 0xeb8>;
+				};
+
+				cal_art_5000: cal@5000 {
+					reg = <0x5000 0xeb8>;
+				};
+
+				macaddr_lan: macaddr@ffa0 {
+					reg = <0xffa0 0x11>;
+				};
+
+				macaddr_wan: macaddr@ffb4 {
+					reg = <0xffb4 0x11>;
+				};
 			};
 
 			fwconcat1: partition@670000 {
@@ -202,6 +224,9 @@
 
 	pll-data = <0x11110000 0x00001099 0x00991099>;
 
+	nvmem-cells = <&macaddr_lan>;
+	nvmem-cell-names = "mac-address-ascii";
+
 	fixed-link {
 		speed = <1000>;
 		full-duplex;
@@ -213,5 +238,9 @@
 
 	pll-data = <0x11110000 0x00001099 0x00991099>;
 
+	nvmem-cells = <&macaddr_wan>;
+	nvmem-cell-names = "mac-address-ascii";
+
 	phy-handle = <&phy4>;
 };
+
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 31ea891d57..c6284edafd 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -19,6 +19,7 @@ ath79_setup_interfaces()
 	araknis,an-700-ap-i-ac|\
 	arduino,yun|\
 	aruba,ap-105|\
+	aruba,ap-175|\
 	asus,rp-ac51|\
 	asus,rp-ac66|\
 	avm,fritz1750e|\
@@ -634,7 +635,6 @@ ath79_setup_macs()
 	dlink,dir-629-a1)
 		wan_mac=$(mtd_get_mac_text "mfcdata" 0x6a)
 		;;
-	dlink,dir-825-b1|\
 	trendnet,tew-673gru)
 		lan_mac=$(mtd_get_mac_text "caldata" 0xffa0)
 		wan_mac=$(mtd_get_mac_text "caldata" 0xffb4)
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 9827508c04..022f5e2947 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -124,7 +124,6 @@ case "$FIRMWARE" in
 	buffalo,wzr-hp-ag300h)
 		caldata_extract "art" 0x1000 0xeb8
 		;;
-	dlink,dir-825-b1|\
 	trendnet,tew-673gru)
 		caldata_extract "caldata" 0x1000 0xeb8
 		ath9k_patch_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 0x20c
@@ -143,7 +142,6 @@ case "$FIRMWARE" in
 	buffalo,wzr-hp-ag300h)
 		caldata_extract "art" 0x5000 0xeb8
 		;;
-	dlink,dir-825-b1|\
 	trendnet,tew-673gru)
 		caldata_extract "caldata" 0x5000 0xeb8
 		ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 0x20c
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 0df43f86ab..8c9750adff 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -395,6 +395,15 @@ define Device/aruba_ap-105
 endef
 TARGET_DEVICES += aruba_ap-105
 
+define Device/aruba_ap-175
+  SOC := ar7161
+  DEVICE_VENDOR := Aruba
+  DEVICE_MODEL := AP-175
+  IMAGE_SIZE := 16000k
+  DEVICE_PACKAGES := kmod-gpio-pca953x kmod-hwmon-lm75 kmod-i2c-gpio kmod-rtc-ds1374
+endef
+TARGET_DEVICES += aruba_ap-175
+
 define Device/asus_pl-ac56
   SOC := qca9563
   DEVICE_VENDOR := ASUS
diff --git a/target/linux/bcm47xx/config-5.10 b/target/linux/bcm47xx/config-5.10
index 31d6d1de39..bee300d9c0 100644
--- a/target/linux/bcm47xx/config-5.10
+++ b/target/linux/bcm47xx/config-5.10
@@ -1,4 +1,3 @@
-CONFIG_ADM6996_PHY=y
 CONFIG_ARCH_BINFMT_ELF_STATE=y
 CONFIG_ARCH_CLOCKSOURCE_DATA=y
 CONFIG_ARCH_DISCARD_MEMBLOCK=y
diff --git a/target/linux/bcm47xx/config-5.15 b/target/linux/bcm47xx/config-5.15
index 0714c9a57c..6f091c0e7f 100644
--- a/target/linux/bcm47xx/config-5.15
+++ b/target/linux/bcm47xx/config-5.15
@@ -1,4 +1,3 @@
-CONFIG_ADM6996_PHY=y
 CONFIG_ARCH_32BIT_OFF_T=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_KEEP_MEMBLOCK=y
diff --git a/target/linux/bcm47xx/legacy/config-default b/target/linux/bcm47xx/legacy/config-default
index 8a52e475c7..b80b03b5cb 100644
--- a/target/linux/bcm47xx/legacy/config-default
+++ b/target/linux/bcm47xx/legacy/config-default
@@ -1,8 +1,8 @@
+CONFIG_ADM6996_PHY=y
 CONFIG_B44=y
 CONFIG_B44_PCI=y
 CONFIG_B44_PCICORE_AUTOSELECT=y
 CONFIG_B44_PCI_AUTOSELECT=y
 # CONFIG_BCM47XX_BCMA is not set
 # CONFIG_BCMA is not set
-# CONFIG_MTD_NAND is not set
 # CONFIG_SSB_DRIVER_GIGE is not set
diff --git a/target/linux/bcm47xx/mips74k/config-default b/target/linux/bcm47xx/mips74k/config-default
index 2c3c40377a..3ba49507d4 100644
--- a/target/linux/bcm47xx/mips74k/config-default
+++ b/target/linux/bcm47xx/mips74k/config-default
@@ -1,20 +1,16 @@
-# CONFIG_ADM6996_PHY is not set
 # CONFIG_BCM47XX_SSB is not set
 CONFIG_BGMAC=y
 CONFIG_BGMAC_BCMA=y
 CONFIG_BOUNCE=y
+CONFIG_CPU_HAS_DIEI=y
+CONFIG_CPU_HAS_RIXI=y
 # CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPSR1 is not set
 CONFIG_CPU_MIPS32_R2=y
 CONFIG_CPU_MIPSR2=y
-# CONFIG_FIXED_PHY is not set
+CONFIG_CPU_SUPPORTS_MSA=y
 # CONFIG_GPIO_WDT is not set
 CONFIG_HIGHMEM=y
+CONFIG_KMAP_LOCAL=y
+CONFIG_MIPS_SPRAM=y
 # CONFIG_SSB is not set
-# CONFIG_SSB_DRIVER_EXTIF is not set
-# CONFIG_SSB_DRIVER_GIGE is not set
-# CONFIG_SSB_DRIVER_MIPS is not set
-# CONFIG_SSB_EMBEDDED is not set
-# CONFIG_SSB_PCICORE_HOSTMODE is not set
-# CONFIG_SSB_SERIAL is not set
-# CONFIG_SSB_SFLASH is not set
+CONFIG_TARGET_ISA_REV=2
diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/linksys.sh b/target/linux/ipq40xx/base-files/lib/upgrade/linksys.sh
index c0d45d640d..696f653eb9 100644
--- a/target/linux/ipq40xx/base-files/lib/upgrade/linksys.sh
+++ b/target/linux/ipq40xx/base-files/lib/upgrade/linksys.sh
@@ -100,7 +100,12 @@ platform_do_upgrade_linksys() {
 		fi
 
 		# complete std upgrade
-		nand_upgrade_tar "$1"
+		if nand_upgrade_tar "$1" ; then
+			nand_do_upgrade_success
+		else
+			nand_do_upgrade_failure
+		fi
+
 	}
 
 	[ "$magic_long" = "27051956" ] && {
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360-v2.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360-v2.dts
index 063d6dca5e..a30746cde2 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360-v2.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360-v2.dts
@@ -42,6 +42,18 @@
 				label = "urlader";
 				reg = <0x00000 0x20000>;
 				read-only;
+
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				cal_urlader_985: cal@985 {
+					reg = <0x985 0x440>;
+				};
+
+				macaddr_urlader_a91: macaddr@a91 {
+					reg = <0xa91 0x6>;
+				};
 			};
 
 			partition@20000 {
@@ -78,12 +90,8 @@
 	reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
 };
 
-&urlader {
-	compatible = "nvmem-cells";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	macaddr_urlader_a91: macaddr@a91 {
-		reg = <0xa91 0x6>;
-	};
+&wifi {
+	/delete-property/ qca,no-eeprom;
+	nvmem-cells = <&cal_urlader_985>;
+	nvmem-cell-names = "calibration";
 };
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi
index 73f6e152bf..7324127d2a 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi
@@ -151,7 +151,7 @@
 		#address-cells = <2>;
 		device_type = "pci";
 
-		wifi@168c,002e {
+		wifi: wifi@168c,002e {
 			compatible = "pci168c,002e";
 			reg = <0 0 0 0 0>;
 			qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
diff --git a/target/linux/lantiq/image/ar9.mk b/target/linux/lantiq/image/ar9.mk
index 1edcf58fb0..ff0a132f4a 100644
--- a/target/linux/lantiq/image/ar9.mk
+++ b/target/linux/lantiq/image/ar9.mk
@@ -17,6 +17,8 @@ define Device/avm_fritz7320
   DEVICE_MODEL := FRITZ!Box 7320
   DEVICE_ALT0_VENDOR := 1&1
   DEVICE_ALT0_MODEL := HomeServer
+  DEVICE_ALT1_VENDOR := AVM
+  DEVICE_ALT1_MODEL := Fritz!box 7330
   SOC := ar9
   IMAGE_SIZE := 15744k
   LOADER_FLASH_OFFS := 0x31000
diff --git a/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
index c6bacb8d3c..eefc39b30b 100644
--- a/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
+++ b/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
@@ -19,8 +19,7 @@ case "$FIRMWARE" in
 			avm,fritz3390)
 				caldata_extract_reverse "urlader" 0x2546 0x440
 				;;
-			avm,fritz7360sl|\
-			avm,fritz7360-v2)
+			avm,fritz7360sl)
 				caldata_extract "urlader" 0x985 0x1000
 				;;
 			avm,fritz7412|\
diff --git a/target/linux/ramips/dts/mt7620n_zyxel_keenetic-lite-iii-a.dts b/target/linux/ramips/dts/mt7620n_zyxel_keenetic-lite-iii-a.dts
new file mode 100644
index 0000000000..0d1c4696d7
--- /dev/null
+++ b/target/linux/ramips/dts/mt7620n_zyxel_keenetic-lite-iii-a.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "zyxel,keenetic-lite-iii-a", "ralink,mt7620n-soc";
+	model = "ZyXEL Keenetic Lite III (rev. A)";
+
+	aliases {
+		led-boot = &led_wan;
+		led-failsafe = &led_wan;
+		led-running = &led_wan;
+		led-upgrade = &led_wan;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+ 
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; // #GPIO1
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; // #GPIO2
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		sw0 {
+			label = "sw0";
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; // #GPIO17
+			linux,code = <BTN_0>;
+		};
+
+		sw1 {
+			label = "sw1";
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; // #GPIO20
+			linux,code = <BTN_1>;
+		};
+
+		sw2 {
+			label = "sw2";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; // #GPIO21
+			linux,code = <BTN_2>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_wan: wan {
+			label = "green:wan";
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; // #GPIO38
+		};
+
+		wifi {
+			label = "green:wifi";
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; // #GPIO72
+		};
+	};
+
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <48000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "U-Config";
+				reg = <0x30000 0x10000>;
+			};
+
+			factory: partition@40000 {
+				label = "RF-EEPROM";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x7a0000>;
+			};
+
+			partition@7f0000 {
+				label = "Config";
+				reg = <0x7f0000 0x10000>;
+			};
+
+			partition@0_1 {
+				label = "Full";
+				reg = <0x0 0x800000>;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c";
+		function = "gpio";
+	};
+};
+
+&wmac {
+	ralink,mtd-eeprom = <&factory 0x0>;
+};
diff --git a/target/linux/ramips/dts/mt7621_h3c_tx180x.dtsi b/target/linux/ramips/dts/mt7621_h3c_tx180x.dtsi
index 54d7908e40..fe374bfa6b 100644
--- a/target/linux/ramips/dts/mt7621_h3c_tx180x.dtsi
+++ b/target/linux/ramips/dts/mt7621_h3c_tx180x.dtsi
@@ -138,10 +138,6 @@
 	};
 };
 
-&pcie2 {
-	status = "disabled";
-};
-
 &state_default {
 	gpio {
 		groups = "jtag";
diff --git a/target/linux/ramips/dts/mt7621_haier-sim_wr1800k.dtsi b/target/linux/ramips/dts/mt7621_haier-sim_wr1800k.dtsi
index a272d1ad75..4dd6f3b0ae 100644
--- a/target/linux/ramips/dts/mt7621_haier-sim_wr1800k.dtsi
+++ b/target/linux/ramips/dts/mt7621_haier-sim_wr1800k.dtsi
@@ -152,10 +152,6 @@
 	};
 };
 
-&pcie2 {
-	status = "disabled";
-};
-
 &state_default {
 	gpio {
 		groups = "i2c", "uart3", "wdt";
diff --git a/target/linux/ramips/dts/mt7621_netgear_wax202.dts b/target/linux/ramips/dts/mt7621_netgear_wax202.dts
index 02f540d743..fbe17ef0d3 100644
--- a/target/linux/ramips/dts/mt7621_netgear_wax202.dts
+++ b/target/linux/ramips/dts/mt7621_netgear_wax202.dts
@@ -217,10 +217,6 @@
 	};
 };
 
-&pcie2 {
-	status = "disabled";
-};
-
 &state_default {
 	gpio {
 		groups = "uart3", "uart2", "jtag", "wdt";
diff --git a/target/linux/ramips/dts/mt7621_tplink_eap615-wall-v1.dts b/target/linux/ramips/dts/mt7621_tplink_eap615-wall-v1.dts
index 36809d48ff..58e4bbf757 100644
--- a/target/linux/ramips/dts/mt7621_tplink_eap615-wall-v1.dts
+++ b/target/linux/ramips/dts/mt7621_tplink_eap615-wall-v1.dts
@@ -148,10 +148,6 @@
 	};
 };
 
-&pcie2 {
-	status = "disabled";
-};
-
 &gmac0 {
 	nvmem-cells = <&macaddr_info_8>;
 	nvmem-cell-names = "mac-address";
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index f5eabfe1ad..cbd7219d14 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -1473,6 +1473,18 @@ define Device/zte_q7
 endef
 TARGET_DEVICES += zte_q7
 
+define Device/zyxel_keenetic-lite-iii-a
+  SOC := mt7620n
+  IMAGE_SIZE := 7872k
+  DEVICE_VENDOR := ZyXEL
+  DEVICE_MODEL := Keenetic Lite III
+  DEVICE_VARIANT := A
+  IMAGES += factory.bin
+  IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to 64k | check-size | \
+		zyimage -d 2102018 -v "ZyXEL Keenetic Lite III"
+endef
+TARGET_DEVICES += zyxel_keenetic-lite-iii-a
+
 define Device/zyxel_keenetic-omni
   SOC := mt7620n
   IMAGE_SIZE := 7872k
diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
index 36e3045a38..2deda0861a 100644
--- a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
@@ -55,6 +55,7 @@ planex,mzk-ex300np|\
 zbtlink,zbt-we826-16m|\
 zbtlink,zbt-we826-32m|\
 zbtlink,zbt-wr8305rt|\
+zyxel,keenetic-lite-iii-a|\
 zyxel,keenetic-omni|\
 zyxel,keenetic-omni-ii|\
 zyxel,keenetic-viva)
diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
index 992d8a9c40..787e123e31 100644
--- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
@@ -28,6 +28,7 @@ ramips_setup_interfaces()
 	zbtlink,zbt-we826-32m|\
 	zbtlink,zbt-we826-e|\
 	zbtlink,zbt-wr8305rt|\
+	zyxel,keenetic-lite-iii-a|\
 	zyxel,keenetic-omni)
 		ucidef_add_switch "switch0" \
 			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
@@ -404,6 +405,11 @@ ramips_setup_macs()
 	zbtlink,zbt-we1026-5g-16m)
 		label_mac=$(mtd_get_mac_binary factory 0x4)
 		;;
+	zyxel,keenetic-lite-iii-a)
+		lan_mac=$(mtd_get_mac_binary RF-EEPROM 0x4)		
+		wan_mac=$(mtd_get_mac_binary RF-EEPROM 0x28)
+		label_mac=$wan_mac
+		;;
 	zyxel,keenetic-omni|\
 	zyxel,keenetic-omni-ii|\
 	zyxel,keenetic-viva)
diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index b23464bebe..b3de1f39cf 100644
--- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -152,6 +152,10 @@ case "$board" in
 		hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
 		[ "$PHYNBR" = "1" ] &&  macaddr_add $hw_mac_addr "0x100000" > /sys${DEVPATH}/macaddress
 		;;
+	totolink,x5000r)
+		hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
+		[ "$PHYNBR" = "1" ] &&  macaddr_add $hw_mac_addr 4 > /sys${DEVPATH}/macaddress
+		;;
 	tplink,eap615-wall-v1)
 		hw_mac_addr="$(mtd_get_mac_binary product-info 0x8)"
 		macaddr_add "$hw_mac_addr" "$PHYNBR" > "/sys${DEVPATH}/macaddress"
diff --git a/tools/automake/patches/200-other-V-values-for-verbosity.patch b/tools/automake/patches/200-other-V-values-for-verbosity.patch
new file mode 100644
index 0000000000..1ea9d38b0e
--- /dev/null
+++ b/tools/automake/patches/200-other-V-values-for-verbosity.patch
@@ -0,0 +1,59 @@
+From: Bogdan Drozdowski <bogdandr AT op.pl>
+Date: Sat, 31 Dec 2022 20:17:35 +0100
+Subject: [PATCH] Allow other V values for verbosity
+
+---
+ m4/silent.m4    |  2 +-
+ t/silent-gen.sh | 24 ++++++++++++++++++++++++
+ 2 files changed, 25 insertions(+), 1 deletion(-)
+
+--- a/m4/silent.m4
++++ b/m4/silent.m4
+@@ -43,7 +43,7 @@ else
+ fi])
+ if test $am_cv_make_support_nested_variables = yes; then
+   dnl Using '$V' instead of '$(V)' breaks IRIX make.
+-  AM_V='$(V)'
++  AM_V='$(shell if ( test "x$(V)" = "x0" ); then echo 0; elif ( test "x$(V)" = "x" ); then echo $(AM_DEFAULT_VERBOSITY); else echo 1; fi)'
+   AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+ else
+   AM_V=$AM_DEFAULT_VERBOSITY
+--- a/t/silent-gen.sh
++++ b/t/silent-gen.sh
+@@ -54,6 +54,18 @@ grep 'cp ' stdout
+ grep 'echo ' stdout
+ 
+ $MAKE clean
++run_make -O V=99
++grep 'GEN ' stdout && exit 1
++grep 'cp ' stdout
++grep 'echo ' stdout
++
++$MAKE clean
++run_make -O V=vvv
++grep 'GEN ' stdout && exit 1
++grep 'cp ' stdout
++grep 'echo ' stdout
++
++$MAKE clean
+ run_make -O V=0
+ grep 'GEN .*foo' stdout
+ grep 'cp ' stdout && exit 1
+@@ -78,5 +90,17 @@ run_make -O V=1
+ grep 'GEN ' stdout && exit 1
+ grep 'cp ' stdout
+ grep 'echo ' stdout
++
++$MAKE clean
++run_make -O V=99
++grep 'GEN ' stdout && exit 1
++grep 'cp ' stdout
++grep 'echo ' stdout
++
++$MAKE clean
++run_make -O V=v
++grep 'GEN ' stdout && exit 1
++grep 'cp ' stdout
++grep 'echo ' stdout
+ 
+ :
diff --git a/tools/libtool/Makefile b/tools/libtool/Makefile
index 6626142294..b4f3ecc36b 100644
--- a/tools/libtool/Makefile
+++ b/tools/libtool/Makefile
@@ -23,7 +23,7 @@ HOST_CONFIGURE_VARS += \
 
 define Host/Prepare
 	$(call Host/Prepare/Default)
-	(cd $(STAGING_DIR_HOST)/share/aclocal/ && rm -f libtool.m4 ltdl.m4 lt~obsolete.m4 ltoptions.m4 ltsugar.m4 ltversion.m4)
+	$(call Host/Uninstall)
 	$(if $(QUILT),,(cd $(HOST_BUILD_DIR); touch README-release; $(AM_TOOL_PATHS) ./bootstrap --skip-git --skip-po --force))
 endef
 
@@ -33,18 +33,13 @@ define Host/Configure
 endef
 
 define Host/Install
-	$(MAKE) -C $(HOST_BUILD_DIR) install
+	$(call Host/Compile/Default,install)
 	$(SED) 's,\(hardcode_into_libs\)=yes,\1=no,g' $(STAGING_DIR_HOST)/bin/libtool
-	$(CP) $(STAGING_DIR_HOST)/bin/libtool $(STAGING_DIR_HOST)/bin/libtool-ucxx
-	$(SED) 's,-lstdc++,-luClibc++,g' $(STAGING_DIR_HOST)/bin/libtool-ucxx
 endef
 
 define Host/Uninstall
 	-$(call Host/Compile/Default,uninstall)
-endef
-
-define Host/Clean
-	$(call Host/Clean/Default)
+	(cd $(STAGING_DIR_HOST)/share/aclocal/ && rm -f libtool.m4 ltdl.m4 lt~obsolete.m4 ltoptions.m4 ltsugar.m4 ltversion.m4)
 endef
 
 $(eval $(call HostBuild))