diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3710i.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3710i.dts index 5d81da4686..2eb6f6e21e 100644 --- a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3710i.dts +++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3710i.dts @@ -9,6 +9,8 @@ compatible = "enterasys,ws-ap3710i"; aliases { + ethernet0 = &enet0; + ethernet1 = &enet2; led-boot = &led_power_green; led-failsafe = &led_power_red; led-running = &led_power_green; @@ -16,6 +18,11 @@ label-mac-device = &enet0; }; + chosen { + bootargs-override = "console=ttyS0,115200"; + stdout-path = &serial0; + }; + memory { device_type = "memory"; }; @@ -74,7 +81,7 @@ #size-cells = <1>; partition@0 { - compatible = "denx,fit"; + compatible = "denx,uimage"; reg = <0x0 0x1d80000>; label = "firmware"; }; @@ -145,6 +152,13 @@ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; reg = <0 0xffe09000 0 0x1000>; + + /* Filled by U-Boot */ + bus-range = <0x00 0x01>; + dma-ranges = <0x2000000 0x00 0xfff00000 0x00 0xffe00000 + 0x00 0x100000 0x42000000 0x00 0x00 0x00 + 0x00 0x00 0x10000000>; + pcie@0 { ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 @@ -160,6 +174,13 @@ reg = <0 0xffe0a000 0 0x1000>; ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + + /* Filled by U-Boot */ + bus-range = <0x00 0x01>; + dma-ranges = <0x2000000 0x00 0xfff00000 0x00 + 0xffe00000 0x00 0x100000 0x42000000 + 0x00 0x00 0x00 0x00 0x00 0x10000000>; + pcie@0 { ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 @@ -174,6 +195,87 @@ }; /include/ "fsl/p1020si-post.dtsi" +/ { + cpus { + PowerPC,P1020@0 { + bus-frequency = <399999996>; + timebase-frequency = <50000000>; + clock-frequency = <799999992>; + d-cache-block-size = <0x20>; + d-cache-size = <0x8000>; + d-cache-sets = <0x80>; + i-cache-block-size = <0x20>; + i-cache-size = <0x8000>; + i-cache-sets = <0x80>; + cpu-release-addr = <0x0 0x0ffff280>; + status = "okay"; + enable-method = "spin-table"; + }; + + PowerPC,P1020@1 { + bus-frequency = <399999996>; + timebase-frequency = <50000000>; + clock-frequency = <799999992>; + d-cache-block-size = <0x20>; + d-cache-size = <0x8000>; + d-cache-sets = <0x80>; + i-cache-block-size = <0x20>; + i-cache-size = <0x8000>; + i-cache-sets = <0x80>; + cpu-release-addr = <0x0 0x0ffff2a0>; + status = "disabled"; + enable-method = "spin-table"; + }; + }; + + memory { + reg = <0x0 0x0 0x0 0x10000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cpu1-bootpage@ff00000 { + /* Reserve upper 1 MB for second-core-bootpage */ + reg = <0x0 0xff00000 0x0 0x100000>; + }; + }; + + soc@ffe00000 { + bus-frequency = <399999996>; + + serial@4600 { + clock-frequency = <399999996>; + }; + + serial@4500 { + clock-frequency = <399999996>; + }; + + pic@40000 { + clock-frequency = <399999996>; + }; + }; + + localbus@ffe05000 { + bus-frequency = <24999999>; + }; +}; + +&enet0 { + rx-stash-idx = <0x00>; + rx-stash-len = <0x60>; + bd-stash; +}; + +&enet2 { + rx-stash-idx = <0x00>; + rx-stash-len = <0x60>; + bd-stash; +}; + /* * For the OpenWrt 22.03 release, since Linux 5.10.138 now uses * aliases to determine PCI domain numbers, drop aliases so as not to diff --git a/target/linux/mpc85xx/image/p1020.mk b/target/linux/mpc85xx/image/p1020.mk index d3d7f93ddd..e5bfabf8ce 100644 --- a/target/linux/mpc85xx/image/p1020.mk +++ b/target/linux/mpc85xx/image/p1020.mk @@ -62,7 +62,11 @@ define Device/enterasys_ws-ap3710i DEVICE_VENDOR := Enterasys DEVICE_MODEL := WS-AP3710i BLOCKSIZE := 128k - KERNEL = kernel-bin | lzma | fit lzma $(KDIR)/image-$$(DEVICE_DTS).dtb + KERNEL_NAME := simpleImage.ws-ap3710i + KERNEL_ENTRY := 0x1000000 + KERNEL_LOADADDR := 0x1000000 + KERNEL = kernel-bin | uImage none + KERNEL_INITRAMFS := kernel-bin | uImage none IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata endef diff --git a/target/linux/mpc85xx/p1020/target.mk b/target/linux/mpc85xx/p1020/target.mk index 8770edb9a9..d0d919cb1d 100644 --- a/target/linux/mpc85xx/p1020/target.mk +++ b/target/linux/mpc85xx/p1020/target.mk @@ -1,5 +1,5 @@ BOARDNAME:=P1020 -KERNEL_IMAGES:=simpleImage.ws-ap3825i +KERNEL_IMAGES:=simpleImage.ws-ap3710i simpleImage.ws-ap3825i define Target/Description Build firmware images for Freescale P1020 based boards. diff --git a/target/linux/mpc85xx/patches-5.15/106-powerpc-85xx-ws-ap3710i-support.patch b/target/linux/mpc85xx/patches-5.15/106-powerpc-85xx-ws-ap3710i-support.patch index 124376ffd9..1edc2aa56b 100644 --- a/target/linux/mpc85xx/patches-5.15/106-powerpc-85xx-ws-ap3710i-support.patch +++ b/target/linux/mpc85xx/patches-5.15/106-powerpc-85xx-ws-ap3710i-support.patch @@ -28,3 +28,33 @@ obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o +--- a/arch/powerpc/boot/Makefile ++++ b/arch/powerpc/boot/Makefile +@@ -164,6 +164,7 @@ src-plat-$(CONFIG_PPC_POWERNV) += pserie + src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S + src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c + src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S ++src-plat-$(CONFIG_WS_AP3710I) += simpleboot.c fixed-head.S + + src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c + +@@ -345,6 +346,7 @@ image-$(CONFIG_TQM8555) += cuImage.tqm + image-$(CONFIG_TQM8560) += cuImage.tqm8560 + image-$(CONFIG_KSI8560) += cuImage.ksi8560 + image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1 ++image-$(CONFIG_WS_AP3710I) += simpleImage.ws-ap3710i + # Board ports in arch/powerpc/platform/86xx/Kconfig + image-$(CONFIG_MVME7100) += dtbImage.mvme7100 + +--- a/arch/powerpc/boot/wrapper ++++ b/arch/powerpc/boot/wrapper +@@ -326,7 +326,8 @@ adder875-redboot) + platformo="$object/fixed-head.o $object/redboot-8xx.o" + binary=y + ;; +-simpleboot-tl-wdr4900-v1) ++simpleboot-tl-wdr4900-v1|\ ++simpleboot-ws-ap3710i) + platformo="$object/fixed-head.o $object/simpleboot.o" + link_address='0x1000000' + binary=y diff --git a/target/linux/mpc85xx/patches-5.15/107-powerpc-85xx-add-ws-ap3825i-support.patch b/target/linux/mpc85xx/patches-5.15/107-powerpc-85xx-add-ws-ap3825i-support.patch index b211f3cb30..3f05c906af 100644 --- a/target/linux/mpc85xx/patches-5.15/107-powerpc-85xx-add-ws-ap3825i-support.patch +++ b/target/linux/mpc85xx/patches-5.15/107-powerpc-85xx-add-ws-ap3825i-support.patch @@ -37,29 +37,23 @@ WS-AP3825i AP. obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile -@@ -164,6 +164,7 @@ src-plat-$(CONFIG_PPC_POWERNV) += pserie - src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S - src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c - src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S -+src-plat-$(CONFIG_WS_AP3825I) += simpleboot.c fixed-head.S - - src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c - -@@ -345,6 +346,7 @@ image-$(CONFIG_TQM8555) += cuImage.tqm - image-$(CONFIG_TQM8560) += cuImage.tqm8560 +@@ -347,6 +347,7 @@ image-$(CONFIG_TQM8560) += cuImage.tqm image-$(CONFIG_KSI8560) += cuImage.ksi8560 image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1 + image-$(CONFIG_WS_AP3710I) += simpleImage.ws-ap3710i +image-$(CONFIG_WS_AP3825I) += simpleImage.ws-ap3825i # Board ports in arch/powerpc/platform/86xx/Kconfig image-$(CONFIG_MVME7100) += dtbImage.mvme7100 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper -@@ -326,6 +326,7 @@ adder875-redboot) - platformo="$object/fixed-head.o $object/redboot-8xx.o" +@@ -327,7 +327,8 @@ adder875-redboot) binary=y ;; -+simpleboot-ws-ap3825i|\ - simpleboot-tl-wdr4900-v1) + simpleboot-tl-wdr4900-v1|\ +-simpleboot-ws-ap3710i) ++simpleboot-ws-ap3710i|\ ++simpleboot-ws-ap3825i) platformo="$object/fixed-head.o $object/simpleboot.o" link_address='0x1000000' + binary=y diff --git a/target/linux/mpc85xx/patches-5.15/109-powerpc-85xx-add-ws-ap3715i-support.patch b/target/linux/mpc85xx/patches-5.15/109-powerpc-85xx-add-ws-ap3715i-support.patch index 8272d9dd2a..fe9abbb1e2 100644 --- a/target/linux/mpc85xx/patches-5.15/109-powerpc-85xx-add-ws-ap3715i-support.patch +++ b/target/linux/mpc85xx/patches-5.15/109-powerpc-85xx-add-ws-ap3715i-support.patch @@ -30,21 +30,21 @@ obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile -@@ -346,6 +346,7 @@ image-$(CONFIG_TQM8555) += cuImage.tqm - image-$(CONFIG_TQM8560) += cuImage.tqm8560 +@@ -347,6 +347,7 @@ image-$(CONFIG_TQM8560) += cuImage.tqm image-$(CONFIG_KSI8560) += cuImage.ksi8560 image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1 + image-$(CONFIG_WS_AP3710I) += simpleImage.ws-ap3710i +image-$(CONFIG_WS_AP3715I) += simpleImage.ws-ap3715i image-$(CONFIG_WS_AP3825I) += simpleImage.ws-ap3825i # Board ports in arch/powerpc/platform/86xx/Kconfig image-$(CONFIG_MVME7100) += dtbImage.mvme7100 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper -@@ -326,6 +326,7 @@ adder875-redboot) - platformo="$object/fixed-head.o $object/redboot-8xx.o" - binary=y +@@ -328,6 +328,7 @@ adder875-redboot) ;; + simpleboot-tl-wdr4900-v1|\ + simpleboot-ws-ap3710i|\ +simpleboot-ws-ap3715i|\ - simpleboot-ws-ap3825i|\ - simpleboot-tl-wdr4900-v1) + simpleboot-ws-ap3825i) platformo="$object/fixed-head.o $object/simpleboot.o" + link_address='0x1000000' diff --git a/target/linux/mpc85xx/patches-5.15/110-powerpc-85xx-br200-wp-support.patch b/target/linux/mpc85xx/patches-5.15/110-powerpc-85xx-br200-wp-support.patch index 8d510759dc..ef05df3430 100644 --- a/target/linux/mpc85xx/patches-5.15/110-powerpc-85xx-br200-wp-support.patch +++ b/target/linux/mpc85xx/patches-5.15/110-powerpc-85xx-br200-wp-support.patch @@ -35,7 +35,7 @@ src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c +src-plat-$(CONFIG_BR200_WP) += simpleboot.c fixed-head.S src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S - src-plat-$(CONFIG_WS_AP3825I) += simpleboot.c fixed-head.S + src-plat-$(CONFIG_WS_AP3710I) += simpleboot.c fixed-head.S @@ -345,6 +346,7 @@ image-$(CONFIG_TQM8548) += cuImage.tqm image-$(CONFIG_TQM8555) += cuImage.tqm8555 @@ -43,8 +43,8 @@ image-$(CONFIG_KSI8560) += cuImage.ksi8560 +image-$(CONFIG_BR200_WP) += simpleImage.br200-wp image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1 + image-$(CONFIG_WS_AP3710I) += simpleImage.ws-ap3710i image-$(CONFIG_WS_AP3715I) += simpleImage.ws-ap3715i - image-$(CONFIG_WS_AP3825I) += simpleImage.ws-ap3825i --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -326,6 +326,7 @@ adder875-redboot) @@ -52,6 +52,6 @@ binary=y ;; +simpleboot-br200-wp|\ + simpleboot-tl-wdr4900-v1|\ + simpleboot-ws-ap3710i|\ simpleboot-ws-ap3715i|\ - simpleboot-ws-ap3825i|\ - simpleboot-tl-wdr4900-v1)