diff --git a/include/kernel-version.mk b/include/kernel-version.mk index 071e6a65df..434119a871 100644 --- a/include/kernel-version.mk +++ b/include/kernel-version.mk @@ -7,10 +7,10 @@ ifdef CONFIG_TESTING_KERNEL endif LINUX_VERSION-4.19 = .138 -LINUX_VERSION-5.4 = .61 +LINUX_VERSION-5.4 = .63 LINUX_KERNEL_HASH-4.19.138 = d15c27d05f6c527269b75b30cc72972748e55720e7e00ad8abbaa4fe3b1d5e02 -LINUX_KERNEL_HASH-5.4.61 = 86f13d050f6389c5a1727fa81510ee8eceac795297bc584f443354609617fea4 +LINUX_KERNEL_HASH-5.4.63 = e0260dae0da01163b1a3289ad9c5cc6ee4226720e199e8a1d982e24efda7ffc0 remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1)))) sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1))))))) diff --git a/package/kernel/mac80211/ath.mk b/package/kernel/mac80211/ath.mk index 4169c08dc1..8b02c5cddb 100644 --- a/package/kernel/mac80211/ath.mk +++ b/package/kernel/mac80211/ath.mk @@ -55,7 +55,11 @@ config-$(call config_package,ath9k-htc) += ATH9K_HTC config-$(call config_package,ath10k) += ATH10K ATH10K_PCI config-$(call config_package,ath5k) += ATH5K -config-y += ATH5K_PCI +ifdef CONFIG_TARGET_ath25 + config-y += ATH5K_AHB +else + config-y += ATH5K_PCI +endif config-$(call config_package,ath6kl) += ATH6KL config-$(call config_package,ath6kl-sdio) += ATH6KL_SDIO @@ -117,7 +121,7 @@ endef define KernelPackage/ath $(call KernelPackage/mac80211/Default) TITLE:=Atheros common driver part - DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ath79 +kmod-mac80211 + DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ath79||TARGET_ath25 +kmod-mac80211 FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath.ko MENU:=1 endef @@ -130,7 +134,7 @@ define KernelPackage/ath5k $(call KernelPackage/mac80211/Default) TITLE:=Atheros 5xxx wireless cards support URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath5k - DEPENDS+= @PCI_SUPPORT +kmod-ath +@DRIVER_11W_SUPPORT + DEPENDS+= @(PCI_SUPPORT||TARGET_ath25) +kmod-ath +@DRIVER_11W_SUPPORT FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath5k/ath5k.ko AUTOLOAD:=$(call AutoProbe,ath5k) endef diff --git a/package/libs/jansson/Makefile b/package/libs/jansson/Makefile index 30278ca02e..5799a362dd 100644 --- a/package/libs/jansson/Makefile +++ b/package/libs/jansson/Makefile @@ -8,14 +8,14 @@ include $(TOPDIR)/rules.mk PKG_NAME:=jansson -PKG_VERSION:=2.12 -PKG_RELEASE:=1 +PKG_VERSION:=2.13.1 +PKG_RELEASE:=2 PKG_LICENSE:=MIT PKG_LICENSE_FILES:=LICENSE PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2 PKG_SOURCE_URL:=http://www.digip.org/jansson/releases/ -PKG_HASH:=645d72cc5dbebd4df608d33988e55aa42a7661039e19a379fcbe5c79d1aee1d2 +PKG_HASH:=ee90a0f879d2b7b7159124ff22b937a2a9a8c36d3bb65d1da7dd3f04370a10bd include $(INCLUDE_DIR)/package.mk include $(INCLUDE_DIR)/cmake.mk @@ -32,12 +32,16 @@ define Package/jansson CATEGORY:=Libraries TITLE:=Jansson library URL:=http://www.digip.org/jansson/ + ABI_VERSION:=4 endef define Package/jansson/description Jansson is a C library for encoding, decoding and manipulating JSON data endef +TARGET_CFLAGS += -flto +TARGET_LDFLAGS += -flto + define Package/jansson/install $(INSTALL_DIR) $(1)/usr/lib $(CP) $(PKG_INSTALL_DIR)/usr/lib/libjansson*so* $(1)/usr/lib/ diff --git a/package/libs/libnftnl/Makefile b/package/libs/libnftnl/Makefile index 74771fe678..c56fb068ce 100644 --- a/package/libs/libnftnl/Makefile +++ b/package/libs/libnftnl/Makefile @@ -8,12 +8,12 @@ include $(TOPDIR)/rules.mk PKG_NAME:=libnftnl -PKG_VERSION:=1.1.5 -PKG_RELEASE:=1 +PKG_VERSION:=1.1.7 +PKG_RELEASE:=2 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2 PKG_SOURCE_URL:=https://netfilter.org/projects/$(PKG_NAME)/files -PKG_HASH:=66de4d05227c0a1a731c369b193010d18a05b1185c2735211e0ecf658eeb14f3 +PKG_HASH:=20dbc13f11004aea2c9e479cfb90359cb11fe3446c3140811c18e4ec1648ed8f PKG_MAINTAINER:=Steven Barth PKG_LICENSE:=GPL-2.0+ @@ -39,7 +39,8 @@ define Package/libnftnl/description programming interface (API) to the in-kernel nf_tables subsystem. endef -TARGET_CFLAGS += $(FPIC) +TARGET_CFLAGS += $(FPIC) -flto +TARGET_LDFLAGS += -flto CONFIGURE_ARGS += \ --enable-static \ diff --git a/package/libs/wolfssl/Makefile b/package/libs/wolfssl/Makefile index 1fcca9fc5f..dc8ca2b262 100644 --- a/package/libs/wolfssl/Makefile +++ b/package/libs/wolfssl/Makefile @@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk PKG_NAME:=wolfssl PKG_VERSION:=4.5.0-stable -PKG_RELEASE:=1 +PKG_RELEASE:=2 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz PKG_SOURCE_URL:=https://github.com/wolfSSL/wolfssl/archive/v$(PKG_VERSION) @@ -56,7 +56,8 @@ define Package/libwolfssl/config source "$(SOURCE)/Config.in" endef -TARGET_CFLAGS += $(FPIC) -DFP_MAX_BITS=8192 -fomit-frame-pointer +TARGET_CFLAGS += $(FPIC) -DFP_MAX_BITS=8192 -fomit-frame-pointer -flto +TARGET_LDFLAGS += -flto # --enable-stunnel needed for OpenSSL API compatibility bits CONFIGURE_ARGS += \ diff --git a/package/network/services/dropbear/Config.in b/package/network/services/dropbear/Config.in index 108b80376b..6aa5a7e4e1 100644 --- a/package/network/services/dropbear/Config.in +++ b/package/network/services/dropbear/Config.in @@ -51,7 +51,7 @@ config DROPBEAR_ECC_FULL config DROPBEAR_ED25519 bool "Ed25519 support" - default n + default y if !SMALL_FLASH help This enables the following public key algorithm: ssh-ed25519 diff --git a/package/network/services/dropbear/Makefile b/package/network/services/dropbear/Makefile index 1cda98bf7e..6c97d3e77b 100644 --- a/package/network/services/dropbear/Makefile +++ b/package/network/services/dropbear/Makefile @@ -1,5 +1,5 @@ # -# Copyright (C) 2006-2016 OpenWrt.org +# Copyright (C) 2006-2020 OpenWrt.org # # This is free software, licensed under the GNU General Public License v2. # See /LICENSE for more information. @@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk PKG_NAME:=dropbear PKG_VERSION:=2020.80 -PKG_RELEASE:=2 +PKG_RELEASE:=3 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2 PKG_SOURCE_URL:= \ @@ -25,6 +25,7 @@ PKG_BUILD_PARALLEL:=1 PKG_ASLR_PIE_REGULAR:=1 PKG_USE_MIPS16:=0 PKG_FIXUP:=autoreconf +PKG_FLAGS:=nonshared PKG_CONFIG_DEPENDS:= \ CONFIG_TARGET_INIT_PATH CONFIG_DROPBEAR_ECC CONFIG_DROPBEAR_ECC_FULL \ diff --git a/package/network/utils/iw/Makefile b/package/network/utils/iw/Makefile index 7abf93e01e..90e6782911 100644 --- a/package/network/utils/iw/Makefile +++ b/package/network/utils/iw/Makefile @@ -8,12 +8,12 @@ include $(TOPDIR)/rules.mk PKG_NAME:=iw -PKG_VERSION:=5.4 +PKG_VERSION:=5.8 PKG_RELEASE:=1 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz PKG_SOURCE_URL:=@KERNEL/software/network/iw -PKG_HASH:=a2469f677088d7b1070a7fbb28f3c747041697e8f6ec70783339cb1bc27a395f +PKG_HASH:=b59c4bacb0b6675cc09f2f30ebdceb91174cb65443d0a062fba2c09fad772db4 PKG_MAINTAINER:=Felix Fietkau PKG_LICENSE:=GPL-2.0 diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch index d935a1dc3e..4b462d3f20 100644 --- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch +++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch @@ -1,696 +1,21 @@ --- a/nl80211.h +++ b/nl80211.h -@@ -11,7 +11,7 @@ - * Copyright 2008 Jouni Malinen - * Copyright 2008 Colin McCabe - * Copyright 2015-2017 Intel Deutschland GmbH -- * Copyright (C) 2018-2019 Intel Corporation -+ * Copyright (C) 2018-2020 Intel Corporation +@@ -2515,6 +2515,9 @@ enum nl80211_commands { + * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from + * association request when used with NL80211_CMD_NEW_STATION). * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above -@@ -249,6 +249,45 @@ - */ - - /** -+ * DOC: VLAN offload support for setting group keys and binding STAs to VLANs -+ * -+ * By setting @NL80211_EXT_FEATURE_VLAN_OFFLOAD flag drivers can indicate they -+ * support offloading VLAN functionality in a manner where the driver exposes a -+ * single netdev that uses VLAN tagged frames and separate VLAN-specific netdevs -+ * can then be added using RTM_NEWLINK/IFLA_VLAN_ID similarly to the Ethernet -+ * case. Frames received from stations that are not assigned to any VLAN are -+ * delivered on the main netdev and frames to such stations can be sent through -+ * that main netdev. -+ * -+ * %NL80211_CMD_NEW_KEY (for group keys), %NL80211_CMD_NEW_STATION, and -+ * %NL80211_CMD_SET_STATION will optionally specify vlan_id using -+ * %NL80211_ATTR_VLAN_ID. -+ */ -+ -+/** -+ * DOC: TID configuration -+ * -+ * TID config support can be checked in the %NL80211_ATTR_TID_CONFIG -+ * attribute given in wiphy capabilities. -+ * -+ * The necessary configuration parameters are mentioned in -+ * &enum nl80211_tid_config_attr and it will be passed to the -+ * %NL80211_CMD_SET_TID_CONFIG command in %NL80211_ATTR_TID_CONFIG. -+ * -+ * If the configuration needs to be applied for specific peer then the MAC -+ * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the -+ * configuration will be applied for all the connected peers in the vif except -+ * any peers that have peer specific configuration for the TID by default; if -+ * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values -+ * will be overwritten. -+ * -+ * All this configuration is valid only for STA's current connection -+ * i.e. the configuration will be reset to default when the STA connects back -+ * after disconnection/roaming, and this configuration will be cleared when -+ * the interface goes down. -+ */ -+ -+/** - * enum nl80211_commands - supported nl80211 commands - * - * @NL80211_CMD_UNSPEC: unspecified command to catch errors -@@ -257,13 +296,14 @@ - * to get a list of all present wiphys. - * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or - * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, -- * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the -- * attributes determining the channel width; this is used for setting -- * monitor mode channel), %NL80211_ATTR_WIPHY_RETRY_SHORT, -- * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, -- * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. -- * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL -- * instead, the support here is for backward compatibility only. -+ * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, -+ * %NL80211_ATTR_WIPHY_FREQ_OFFSET (and the attributes determining the -+ * channel width; this is used for setting monitor mode channel), -+ * %NL80211_ATTR_WIPHY_RETRY_SHORT, %NL80211_ATTR_WIPHY_RETRY_LONG, -+ * %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, and/or -+ * %NL80211_ATTR_WIPHY_RTS_THRESHOLD. However, for setting the channel, -+ * see %NL80211_CMD_SET_CHANNEL instead, the support here is for backward -+ * compatibility only. - * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request - * or rename notification. Has attributes %NL80211_ATTR_WIPHY and - * %NL80211_ATTR_WIPHY_NAME. -@@ -312,7 +352,8 @@ - * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT, - * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS. - * The channel to use can be set on the interface or be given using the -- * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width. -+ * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_FREQ_OFFSET, and the -+ * attributes determining channel width. - * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP - * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface - * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP -@@ -497,11 +538,12 @@ - * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and - * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify - * the SSID (mainly for association, but is included in authentication -- * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used -- * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE -- * is used to specify the authentication type. %NL80211_ATTR_IE is used to -- * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs) -- * to be added to the frame. -+ * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ + -+ * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the -+ * channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the -+ * authentication type. %NL80211_ATTR_IE is used to define IEs -+ * (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added -+ * to the frame. - * When used as an event, this reports reception of an Authentication - * frame in station and IBSS modes when the local MLME processed the - * frame, i.e., it was for the local STA and was received in correct -@@ -556,8 +598,9 @@ - * requests to connect to a specified network but without separating - * auth and assoc steps. For this, you need to specify the SSID in a - * %NL80211_ATTR_SSID attribute, and can optionally specify the association -- * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, -- * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, -+ * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, -+ * %NL80211_ATTR_USE_MFP, %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, -+ * %NL80211_ATTR_WIPHY_FREQ_OFFSET, %NL80211_ATTR_CONTROL_PORT, - * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, - * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, - * %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and -@@ -571,6 +614,14 @@ - * set of BSSID,frequency parameters is used (i.e., either the enforcing - * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict - * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT). -+ * Driver shall not modify the IEs specified through %NL80211_ATTR_IE if -+ * %NL80211_ATTR_MAC is included. However, if %NL80211_ATTR_MAC_HINT is -+ * included, these IEs through %NL80211_ATTR_IE are specified by the user -+ * space based on the best possible BSS selected. Thus, if the driver ends -+ * up selecting a different BSS, it can modify these IEs accordingly (e.g. -+ * userspace asks the driver to perform PMKSA caching with BSS1 and the -+ * driver ends up selecting BSS2 with different PMKSA cache entry; RSNIE -+ * has to get updated with the apt PMKID). - * %NL80211_ATTR_PREV_BSSID can be used to request a reassociation within - * the ESS in case the device is already associated and an association with - * a different BSS is desired. -@@ -640,6 +691,10 @@ - * four bytes for vendor frames including the OUI. The registration - * cannot be dropped, but is removed automatically when the netlink - * socket is closed. Multiple registrations can be made. -+ * The %NL80211_ATTR_RECEIVE_MULTICAST flag attribute can be given if -+ * %NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS is available, in which -+ * case the registration can also be modified to include/exclude the -+ * flag, rather than requiring unregistration to change it. - * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for - * backward compatibility - * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This -@@ -739,7 +794,7 @@ - * various triggers. These triggers can be configured through this - * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For - * more background information, see -- * http://wireless.kernel.org/en/users/Documentation/WoWLAN. -+ * https://wireless.wiki.kernel.org/en/users/Documentation/WoWLAN. - * The @NL80211_CMD_SET_WOWLAN command can also be used as a notification - * from the driver reporting the wakeup reason. In this case, the - * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason -@@ -1101,6 +1156,20 @@ - * peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame - * content. The frame is ethernet data. - * -+ * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration -+ * is passed using %NL80211_ATTR_TID_CONFIG attribute. -+ * -+ * @NL80211_CMD_UNPROT_BEACON: Unprotected or incorrectly protected Beacon -+ * frame. This event is used to indicate that a received Beacon frame was -+ * dropped because it did not include a valid MME MIC while beacon -+ * protection was enabled (BIGTK configured in station mode). -+ * -+ * @NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS: Report TX status of a control -+ * port frame transmitted with %NL80211_CMD_CONTROL_PORT_FRAME. -+ * %NL80211_ATTR_COOKIE identifies the TX command and %NL80211_ATTR_FRAME -+ * includes the contents of the frame. %NL80211_ATTR_ACK flag is included -+ * if the recipient acknowledged the frame. -+ * - * @NL80211_CMD_MAX: highest used command number - * @__NL80211_CMD_AFTER_LAST: internal use - */ -@@ -1325,6 +1394,12 @@ enum nl80211_commands { - - NL80211_CMD_PROBE_MESH_LINK, - -+ NL80211_CMD_SET_TID_CONFIG, -+ -+ NL80211_CMD_UNPROT_BEACON, -+ -+ NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS, -+ - /* add new commands above here */ - - /* used to define NL80211_CMD_MAX below */ -@@ -1370,7 +1445,8 @@ enum nl80211_commands { - * of &enum nl80211_chan_width, describing the channel width. See the - * documentation of the enum for more information. - * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the -- * channel, used for anything but 20 MHz bandwidth -+ * channel, used for anything but 20 MHz bandwidth. In S1G this is the -+ * operating channel center frequency. - * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the - * channel, used only for 80+80 MHz bandwidth - * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ -@@ -1580,7 +1656,8 @@ enum nl80211_commands { - * flag is included, then control port frames are sent over NL80211 instead - * using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is - * to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER -- * flag. -+ * flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth -+ * frames are not forwared over the control port. - * - * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. - * We recommend using nested, driver-specific attributes within this. -@@ -2373,6 +2450,64 @@ enum nl80211_commands { - * the allowed channel bandwidth configurations. (u8 attribute) - * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. - * -+ * @NL80211_ATTR_VLAN_ID: VLAN ID (1..4094) for the station and VLAN group key -+ * (u16). -+ * -+ * @NL80211_ATTR_HE_BSS_COLOR: nested attribute for BSS Color Settings. -+ * -+ * @NL80211_ATTR_IFTYPE_AKM_SUITES: nested array attribute, with each entry -+ * using attributes from &enum nl80211_iftype_akm_attributes. This -+ * attribute is sent in a response to %NL80211_CMD_GET_WIPHY indicating -+ * supported AKM suites capability per interface. AKMs advertised in -+ * %NL80211_ATTR_AKM_SUITES are default capabilities if AKM suites not -+ * advertised for a specific interface type. -+ * -+ * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a -+ * nested attribute with &enum nl80211_tid_config_attr sub-attributes; -+ * on output (in wiphy attributes) it contains only the feature sub- -+ * attributes. -+ * -+ * @NL80211_ATTR_CONTROL_PORT_NO_PREAUTH: disable preauth frame rx on control -+ * port in order to forward/receive them as ordinary data frames. -+ * -+ * @NL80211_ATTR_PMK_LIFETIME: Maximum lifetime for PMKSA in seconds (u32, -+ * dot11RSNAConfigPMKReauthThreshold; 0 is not a valid value). -+ * An optional parameter configured through %NL80211_CMD_SET_PMKSA. -+ * Drivers that trigger roaming need to know the lifetime of the -+ * configured PMKSA for triggering the full vs. PMKSA caching based -+ * authentication. This timeout helps authentication methods like SAE, -+ * where PMK gets updated only by going through a full (new SAE) -+ * authentication instead of getting updated during an association for EAP -+ * authentication. No new full authentication within the PMK expiry shall -+ * result in a disassociation at the end of the lifetime. -+ * -+ * @NL80211_ATTR_PMK_REAUTH_THRESHOLD: Reauthentication threshold time, in -+ * terms of percentage of %NL80211_ATTR_PMK_LIFETIME -+ * (u8, dot11RSNAConfigPMKReauthThreshold, 1..100). This is an optional -+ * parameter configured through %NL80211_CMD_SET_PMKSA. Requests the -+ * driver to trigger a full authentication roam (without PMKSA caching) -+ * after the reauthentication threshold time, but before the PMK lifetime -+ * has expired. -+ * -+ * Authentication methods like SAE need to be able to generate a new PMKSA -+ * entry without having to force a disconnection after the PMK timeout. If -+ * no roaming occurs between the reauth threshold and PMK expiration, -+ * disassociation is still forced. -+ * @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the -+ * %NL80211_CMD_REGISTER_FRAME command, see the description there. -+ * @NL80211_ATTR_WIPHY_FREQ_OFFSET: offset of the associated -+ * %NL80211_ATTR_WIPHY_FREQ in positive KHz. Only valid when supplied with -+ * an %NL80211_ATTR_WIPHY_FREQ_OFFSET. -+ * @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the -+ * first channel segment specified in %NL80211_ATTR_CENTER_FREQ1. -+ * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies -+ * -+ * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from -+ * association request when used with NL80211_CMD_NEW_STATION). -+ * + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce + * transmit power to stay within regulatory limits. u32, dBi. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use -@@ -2835,6 +2970,28 @@ enum nl80211_attrs { - NL80211_ATTR_WIPHY_EDMG_CHANNELS, - NL80211_ATTR_WIPHY_EDMG_BW_CONFIG, +@@ -2997,6 +3000,8 @@ enum nl80211_attrs { + + NL80211_ATTR_HE_6GHZ_CAPABILITY, -+ NL80211_ATTR_VLAN_ID, -+ -+ NL80211_ATTR_HE_BSS_COLOR, -+ -+ NL80211_ATTR_IFTYPE_AKM_SUITES, -+ -+ NL80211_ATTR_TID_CONFIG, -+ -+ NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, -+ -+ NL80211_ATTR_PMK_LIFETIME, -+ NL80211_ATTR_PMK_REAUTH_THRESHOLD, -+ -+ NL80211_ATTR_RECEIVE_MULTICAST, -+ NL80211_ATTR_WIPHY_FREQ_OFFSET, -+ NL80211_ATTR_CENTER_FREQ1_OFFSET, -+ NL80211_ATTR_SCAN_FREQ_KHZ, -+ -+ NL80211_ATTR_HE_6GHZ_CAPABILITY, -+ + NL80211_ATTR_WIPHY_ANTENNA_GAIN, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -@@ -3413,6 +3570,8 @@ enum nl80211_mpath_info { - * defined in HE capabilities IE - * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently - * defined -+ * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16), -+ * given for all 6 GHz band channels - * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use - */ - enum nl80211_band_iftype_attr { -@@ -3423,6 +3582,7 @@ enum nl80211_band_iftype_attr { - NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY, - NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET, - NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE, -+ NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA, - - /* keep last */ - __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST, -@@ -3554,6 +3714,9 @@ enum nl80211_wmm_rule { - * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations. - * This is a nested attribute that contains the wmm limitation per AC. - * (see &enum nl80211_wmm_rule) -+ * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel -+ * in current regulatory domain. -+ * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz - * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number - * currently defined - * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use -@@ -3583,6 +3746,8 @@ enum nl80211_frequency_attr { - NL80211_FREQUENCY_ATTR_NO_20MHZ, - NL80211_FREQUENCY_ATTR_NO_10MHZ, - NL80211_FREQUENCY_ATTR_WMM, -+ NL80211_FREQUENCY_ATTR_NO_HE, -+ NL80211_FREQUENCY_ATTR_OFFSET, - - /* keep last */ - __NL80211_FREQUENCY_ATTR_AFTER_LAST, -@@ -3780,6 +3945,7 @@ enum nl80211_sched_scan_match_attr { - * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation - * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed - * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed -+ * @NL80211_RRF_NO_HE: HE operation not allowed - */ - enum nl80211_reg_rule_flags { - NL80211_RRF_NO_OFDM = 1<<0, -@@ -3797,6 +3963,7 @@ enum nl80211_reg_rule_flags { - NL80211_RRF_NO_HT40PLUS = 1<<14, - NL80211_RRF_NO_80MHZ = 1<<15, - NL80211_RRF_NO_160MHZ = 1<<16, -+ NL80211_RRF_NO_HE = 1<<17, - }; - - #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR -@@ -4351,6 +4518,7 @@ enum nl80211_bss_scan_width { - * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update. - * Contains a nested array of signal strength attributes (u8, dBm), - * using the nesting index as the antenna number. -+ * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz - * @__NL80211_BSS_AFTER_LAST: internal - * @NL80211_BSS_MAX: highest BSS attribute - */ -@@ -4375,6 +4543,7 @@ enum nl80211_bss { - NL80211_BSS_PARENT_TSF, - NL80211_BSS_PARENT_BSSID, - NL80211_BSS_CHAIN_SIGNAL, -+ NL80211_BSS_FREQUENCY_OFFSET, - - /* keep last */ - __NL80211_BSS_AFTER_LAST, -@@ -4503,6 +4672,7 @@ enum nl80211_key_default_types { - * See &enum nl80211_key_default_types. - * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode. - * Defaults to @NL80211_KEY_RX_TX. -+ * @NL80211_KEY_DEFAULT_BEACON: flag indicating default Beacon frame key - * - * @__NL80211_KEY_AFTER_LAST: internal - * @NL80211_KEY_MAX: highest key attribute -@@ -4518,6 +4688,7 @@ enum nl80211_key_attributes { - NL80211_KEY_TYPE, - NL80211_KEY_DEFAULT_TYPES, - NL80211_KEY_MODE, -+ NL80211_KEY_DEFAULT_BEACON, - - /* keep last */ - __NL80211_KEY_AFTER_LAST, -@@ -4674,6 +4845,92 @@ enum nl80211_tx_power_setting { - }; - - /** -+ * enum nl80211_tid_config - TID config state -+ * @NL80211_TID_CONFIG_ENABLE: Enable config for the TID -+ * @NL80211_TID_CONFIG_DISABLE: Disable config for the TID -+ */ -+enum nl80211_tid_config { -+ NL80211_TID_CONFIG_ENABLE, -+ NL80211_TID_CONFIG_DISABLE, -+}; -+ -+/* enum nl80211_tx_rate_setting - TX rate configuration type -+ * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate -+ * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter -+ * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter -+ */ -+enum nl80211_tx_rate_setting { -+ NL80211_TX_RATE_AUTOMATIC, -+ NL80211_TX_RATE_LIMITED, -+ NL80211_TX_RATE_FIXED, -+}; -+ -+/* enum nl80211_tid_config_attr - TID specific configuration. -+ * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values -+ * @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported -+ * for per-vif configuration; doesn't list the ones that are generic -+ * (%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE). -+ * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but -+ * per peer instead. -+ * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates -+ * that the new configuration overrides all previous peer -+ * configurations, otherwise previous peer specific configurations -+ * should be left untouched. -+ * @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7) -+ * Its type is u16. -+ * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID. -+ * specified in %NL80211_TID_CONFIG_ATTR_TID. see %enum nl80211_tid_config. -+ * Its type is u8. -+ * @NL80211_TID_CONFIG_ATTR_RETRY_SHORT: Number of retries used with data frame -+ * transmission, user-space sets this configuration in -+ * &NL80211_CMD_SET_TID_CONFIG. It is u8 type, min value is 1 and -+ * the max value is advertised by the driver in this attribute on -+ * output in wiphy capabilities. -+ * @NL80211_TID_CONFIG_ATTR_RETRY_LONG: Number of retries used with data frame -+ * transmission, user-space sets this configuration in -+ * &NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and -+ * the max value is advertised by the driver in this attribute on -+ * output in wiphy capabilities. -+ * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable MPDU aggregation -+ * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. -+ * Its type is u8, using the values from &nl80211_tid_config. -+ * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs -+ * specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using -+ * the values from &nl80211_tid_config. -+ * @NL80211_TID_CONFIG_ATTR_AMSDU_CTRL: Enable/Disable MSDU aggregation -+ * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. -+ * Its type is u8, using the values from &nl80211_tid_config. -+ * @NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE: This attribute will be useful -+ * to notfiy the driver that what type of txrate should be used -+ * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. using -+ * the values form &nl80211_tx_rate_setting. -+ * @NL80211_TID_CONFIG_ATTR_TX_RATE: Data frame TX rate mask should be applied -+ * with the parameters passed through %NL80211_ATTR_TX_RATES. -+ * configuration is applied to the data frame for the tid to that connected -+ * station. -+ */ -+enum nl80211_tid_config_attr { -+ __NL80211_TID_CONFIG_ATTR_INVALID, -+ NL80211_TID_CONFIG_ATTR_PAD, -+ NL80211_TID_CONFIG_ATTR_VIF_SUPP, -+ NL80211_TID_CONFIG_ATTR_PEER_SUPP, -+ NL80211_TID_CONFIG_ATTR_OVERRIDE, -+ NL80211_TID_CONFIG_ATTR_TIDS, -+ NL80211_TID_CONFIG_ATTR_NOACK, -+ NL80211_TID_CONFIG_ATTR_RETRY_SHORT, -+ NL80211_TID_CONFIG_ATTR_RETRY_LONG, -+ NL80211_TID_CONFIG_ATTR_AMPDU_CTRL, -+ NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL, -+ NL80211_TID_CONFIG_ATTR_AMSDU_CTRL, -+ NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE, -+ NL80211_TID_CONFIG_ATTR_TX_RATE, -+ -+ /* keep last */ -+ __NL80211_TID_CONFIG_ATTR_AFTER_LAST, -+ NL80211_TID_CONFIG_ATTR_MAX = __NL80211_TID_CONFIG_ATTR_AFTER_LAST - 1 -+}; -+ -+/** - * enum nl80211_packet_pattern_attr - packet pattern attribute - * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute - * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has -@@ -5144,6 +5401,8 @@ enum plink_actions { - - #define NL80211_KCK_LEN 16 - #define NL80211_KEK_LEN 16 -+#define NL80211_KCK_EXT_LEN 24 -+#define NL80211_KEK_EXT_LEN 32 - #define NL80211_REPLAY_CTR_LEN 8 - - /** -@@ -5152,6 +5411,7 @@ enum plink_actions { - * @NL80211_REKEY_DATA_KEK: key encryption key (binary) - * @NL80211_REKEY_DATA_KCK: key confirmation key (binary) - * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary) -+ * @NL80211_REKEY_DATA_AKM: AKM data (OUI, suite type) - * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal) - * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal) - */ -@@ -5160,6 +5420,7 @@ enum nl80211_rekey_data { - NL80211_REKEY_DATA_KEK, - NL80211_REKEY_DATA_KCK, - NL80211_REKEY_DATA_REPLAY_CTR, -+ NL80211_REKEY_DATA_AKM, - - /* keep last */ - NUM_NL80211_REKEY_DATA, -@@ -5484,6 +5745,39 @@ enum nl80211_feature_flags { - * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in - * station mode (SAE password is passed as part of the connect command). - * -+ * @NL80211_EXT_FEATURE_VLAN_OFFLOAD: The driver supports a single netdev -+ * with VLAN tagged frames and separate VLAN-specific netdevs added using -+ * vconfig similarly to the Ethernet case. -+ * -+ * @NL80211_EXT_FEATURE_AQL: The driver supports the Airtime Queue Limit (AQL) -+ * feature, which prevents bufferbloat by using the expected transmission -+ * time to limit the amount of data buffered in the hardware. -+ * -+ * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection -+ * and can receive key configuration for BIGTK using key indexes 6 and 7. -+ * @NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT: The driver supports Beacon -+ * protection as a client only and cannot transmit protected beacons. -+ * -+ * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the -+ * forwarding of preauth frames over the control port. They are then -+ * handled as ordinary data frames. -+ * -+ * @NL80211_EXT_FEATURE_PROTECTED_TWT: Driver supports protected TWT frames -+ * -+ * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations -+ * in IBSS mode, essentially by dropping their state. -+ * -+ * @NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS: management frame registrations -+ * are possible for multicast frames and those will be reported properly. -+ * -+ * @NL80211_EXT_FEATURE_SCAN_FREQ_KHZ: This driver supports receiving and -+ * reporting scan request with %NL80211_ATTR_SCAN_FREQ_KHZ. In order to -+ * report %NL80211_ATTR_SCAN_FREQ_KHZ, %NL80211_SCAN_FLAG_FREQ_KHZ must be -+ * included in the scan request. -+ * -+ * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver -+ * can report tx status for control port over nl80211 tx operations. -+ * - * @NUM_NL80211_EXT_FEATURES: number of extended features. - * @MAX_NL80211_EXT_FEATURES: highest extended feature index. - */ -@@ -5529,6 +5823,16 @@ enum nl80211_ext_feature_index { - NL80211_EXT_FEATURE_EXT_KEY_ID, - NL80211_EXT_FEATURE_STA_TX_PWR, - NL80211_EXT_FEATURE_SAE_OFFLOAD, -+ NL80211_EXT_FEATURE_VLAN_OFFLOAD, -+ NL80211_EXT_FEATURE_AQL, -+ NL80211_EXT_FEATURE_BEACON_PROTECTION, -+ NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH, -+ NL80211_EXT_FEATURE_PROTECTED_TWT, -+ NL80211_EXT_FEATURE_DEL_IBSS_STA, -+ NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS, -+ NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT, -+ NL80211_EXT_FEATURE_SCAN_FREQ_KHZ, -+ NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS, - - /* add new features before the definition below */ - NUM_NL80211_EXT_FEATURES, -@@ -5640,6 +5944,9 @@ enum nl80211_timeout_reason { - * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to - * only have supported rates and no additional capabilities (unless - * added by userspace explicitly.) -+ * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with -+ * %NL80211_ATTR_SCAN_FREQ_KHZ. This also means -+ * %NL80211_ATTR_SCAN_FREQUENCIES will not be included. - */ - enum nl80211_scan_flags { - NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, -@@ -5655,6 +5962,7 @@ enum nl80211_scan_flags { - NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10, - NL80211_SCAN_FLAG_RANDOM_SN = 1<<11, - NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12, -+ NL80211_SCAN_FLAG_FREQ_KHZ = 1<<13, - }; - - /** -@@ -6151,12 +6459,14 @@ enum nl80211_ftm_responder_stats { - * @NL80211_PREAMBLE_HT: HT preamble - * @NL80211_PREAMBLE_VHT: VHT preamble - * @NL80211_PREAMBLE_DMG: DMG preamble -+ * @NL80211_PREAMBLE_HE: HE preamble - */ - enum nl80211_preamble { - NL80211_PREAMBLE_LEGACY, - NL80211_PREAMBLE_HT, - NL80211_PREAMBLE_VHT, - NL80211_PREAMBLE_DMG, -+ NL80211_PREAMBLE_HE, - }; - - /** -@@ -6349,6 +6659,10 @@ enum nl80211_peer_measurement_attrs { - * is valid) - * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating - * the maximum FTMs per burst (if not present anything is valid) -+ * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if -+ * trigger based ranging measurement is supported -+ * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating -+ * if non trigger based ranging measurement is supported - * - * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal - * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number -@@ -6364,6 +6678,8 @@ enum nl80211_peer_measurement_ftm_capa { - NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS, - NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT, - NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST, -+ NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED, -+ NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED, - - /* keep last */ - NUM_NL80211_PMSR_FTM_CAPA_ATTR, -@@ -6393,6 +6709,20 @@ enum nl80211_peer_measurement_ftm_capa { - * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag) - * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC: request civic location data - * (flag) -+ * @NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED: request trigger based ranging -+ * measurement (flag). -+ * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED are -+ * mutually exclusive. -+ * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor -+ * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based -+ * ranging will be used. -+ * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based -+ * ranging measurement (flag) -+ * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are -+ * mutually exclusive. -+ * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor -+ * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based -+ * ranging will be used. - * - * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal - * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number -@@ -6409,6 +6739,8 @@ enum nl80211_peer_measurement_ftm_req { - NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES, - NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI, - NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC, -+ NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED, -+ NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED, - - /* keep last */ - NUM_NL80211_PMSR_FTM_REQ_ATTR, -@@ -6548,5 +6880,51 @@ enum nl80211_obss_pd_attributes { - NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1, - }; - -+/** -+ * enum nl80211_bss_color_attributes - BSS Color attributes -+ * @__NL80211_HE_BSS_COLOR_ATTR_INVALID: Invalid -+ * -+ * @NL80211_HE_BSS_COLOR_ATTR_COLOR: the current BSS Color. -+ * @NL80211_HE_BSS_COLOR_ATTR_DISABLED: is BSS coloring disabled. -+ * @NL80211_HE_BSS_COLOR_ATTR_PARTIAL: the AID equation to be used.. -+ * -+ * @__NL80211_HE_BSS_COLOR_ATTR_LAST: Internal -+ * @NL80211_HE_BSS_COLOR_ATTR_MAX: highest BSS Color attribute. -+ */ -+enum nl80211_bss_color_attributes { -+ __NL80211_HE_BSS_COLOR_ATTR_INVALID, -+ -+ NL80211_HE_BSS_COLOR_ATTR_COLOR, -+ NL80211_HE_BSS_COLOR_ATTR_DISABLED, -+ NL80211_HE_BSS_COLOR_ATTR_PARTIAL, -+ -+ /* keep last */ -+ __NL80211_HE_BSS_COLOR_ATTR_LAST, -+ NL80211_HE_BSS_COLOR_ATTR_MAX = __NL80211_HE_BSS_COLOR_ATTR_LAST - 1, -+}; -+ -+/** -+ * enum nl80211_iftype_akm_attributes - interface type AKM attributes -+ * @__NL80211_IFTYPE_AKM_ATTR_INVALID: Invalid -+ * -+ * @NL80211_IFTYPE_AKM_ATTR_IFTYPES: nested attribute containing a flag -+ * attribute for each interface type that supports AKM suites specified in -+ * %NL80211_IFTYPE_AKM_ATTR_SUITES -+ * @NL80211_IFTYPE_AKM_ATTR_SUITES: an array of u32. Used to indicate supported -+ * AKM suites for the specified interface types. -+ * -+ * @__NL80211_IFTYPE_AKM_ATTR_LAST: Internal -+ * @NL80211_IFTYPE_AKM_ATTR_MAX: highest interface type AKM attribute. -+ */ -+enum nl80211_iftype_akm_attributes { -+ __NL80211_IFTYPE_AKM_ATTR_INVALID, -+ -+ NL80211_IFTYPE_AKM_ATTR_IFTYPES, -+ NL80211_IFTYPE_AKM_ATTR_SUITES, -+ -+ /* keep last */ -+ __NL80211_IFTYPE_AKM_ATTR_LAST, -+ NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1, -+}; - - #endif /* __LINUX_NL80211_H */ diff --git a/package/network/utils/iw/patches/200-reduce_size.patch b/package/network/utils/iw/patches/200-reduce_size.patch index 58613d59a0..24eb96537b 100644 --- a/package/network/utils/iw/patches/200-reduce_size.patch +++ b/package/network/utils/iw/patches/200-reduce_size.patch @@ -1,6 +1,6 @@ --- a/event.c +++ b/event.c -@@ -699,6 +699,7 @@ static int print_event(struct nl_msg *ms +@@ -944,6 +944,7 @@ static int print_event(struct nl_msg *ms } switch (gnlh->cmd) { @@ -8,15 +8,15 @@ case NL80211_CMD_NEW_WIPHY: printf("renamed to %s\n", nla_get_string(tb[NL80211_ATTR_WIPHY_NAME])); break; -@@ -734,6 +735,7 @@ static int print_event(struct nl_msg *ms +@@ -979,6 +980,7 @@ static int print_event(struct nl_msg *ms case NL80211_CMD_SCHED_SCAN_RESULTS: printf("got scheduled scan results\n"); break; +#endif + case NL80211_CMD_WIPHY_REG_CHANGE: case NL80211_CMD_REG_CHANGE: - printf("regulatory domain change: "); - -@@ -812,6 +814,7 @@ static int print_event(struct nl_msg *ms + if (gnlh->cmd == NL80211_CMD_WIPHY_REG_CHANGE) +@@ -1061,6 +1063,7 @@ static int print_event(struct nl_msg *ms mac_addr_n2a(macbuf, nla_data(tb[NL80211_ATTR_MAC])); printf("del station %s\n", macbuf); break; @@ -24,10 +24,10 @@ case NL80211_CMD_JOIN_IBSS: mac_addr_n2a(macbuf, nla_data(tb[NL80211_ATTR_MAC])); printf("IBSS %s joined\n", macbuf); -@@ -989,9 +992,9 @@ static int print_event(struct nl_msg *ms - parse_nan_match(tb); +@@ -1254,9 +1257,9 @@ static int print_event(struct nl_msg *ms + case NL80211_CMD_CH_SWITCH_NOTIFY: + parse_ch_switch_notify(tb, gnlh->cmd); break; - } +#endif default: - printf("unknown event %d (%s)\n", @@ -38,7 +38,7 @@ --- a/info.c +++ b/info.c -@@ -164,6 +164,7 @@ static int print_phy_handler(struct nl_m +@@ -167,6 +167,7 @@ static int print_phy_handler(struct nl_m tb_band[NL80211_BAND_ATTR_VHT_MCS_SET]) print_vht_info(nla_get_u32(tb_band[NL80211_BAND_ATTR_VHT_CAPA]), nla_data(tb_band[NL80211_BAND_ATTR_VHT_MCS_SET])); @@ -46,7 +46,7 @@ if (tb_band[NL80211_BAND_ATTR_IFTYPE_DATA]) { struct nlattr *nl_iftype; int rem_band; -@@ -171,6 +172,7 @@ static int print_phy_handler(struct nl_m +@@ -174,6 +175,7 @@ static int print_phy_handler(struct nl_m nla_for_each_nested(nl_iftype, tb_band[NL80211_BAND_ATTR_IFTYPE_DATA], rem_band) print_he_info(nl_iftype); } @@ -54,7 +54,7 @@ if (tb_band[NL80211_BAND_ATTR_FREQS]) { if (!band_had_freq) { printf("\t\tFrequencies:\n"); -@@ -213,6 +215,7 @@ next: +@@ -216,6 +218,7 @@ next: } } @@ -62,7 +62,7 @@ if (tb_band[NL80211_BAND_ATTR_RATES]) { printf("\t\tBitrates (non-HT):\n"); nla_for_each_nested(nl_rate, tb_band[NL80211_BAND_ATTR_RATES], rem_rate) { -@@ -229,6 +232,7 @@ next: +@@ -232,6 +235,7 @@ next: printf("\n"); } } @@ -70,7 +70,7 @@ } } -@@ -294,6 +298,7 @@ next: +@@ -297,6 +301,7 @@ next: printf("\tCoverage class: %d (up to %dm)\n", coverage, 450 * coverage); } @@ -78,7 +78,7 @@ if (tb_msg[NL80211_ATTR_CIPHER_SUITES]) { int num = nla_len(tb_msg[NL80211_ATTR_CIPHER_SUITES]) / sizeof(__u32); int i; -@@ -305,6 +310,7 @@ next: +@@ -308,6 +313,7 @@ next: cipher_name(ciphers[i])); } } @@ -86,7 +86,7 @@ if (tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX] && tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX]) -@@ -324,11 +330,13 @@ next: +@@ -327,11 +333,13 @@ next: printf("\t\t * %s\n", iftype_name(nla_type(nl_mode))); } @@ -100,7 +100,7 @@ if (tb_msg[NL80211_ATTR_INTERFACE_COMBINATIONS]) { struct nlattr *nl_combi; -@@ -425,6 +433,7 @@ broken_combination: +@@ -428,6 +436,7 @@ broken_combination: printf("\tinterface combinations are not supported\n"); } @@ -108,7 +108,7 @@ if (tb_msg[NL80211_ATTR_SUPPORTED_COMMANDS]) { printf("\tSupported commands:\n"); nla_for_each_nested(nl_cmd, tb_msg[NL80211_ATTR_SUPPORTED_COMMANDS], rem_cmd) -@@ -522,6 +531,7 @@ broken_combination: +@@ -525,6 +534,7 @@ broken_combination: printf("\t\t * wake up on TCP connection\n"); } } @@ -116,7 +116,7 @@ if (tb_msg[NL80211_ATTR_ROAM_SUPPORT]) printf("\tDevice supports roaming.\n"); -@@ -560,6 +570,7 @@ broken_combination: +@@ -563,6 +573,7 @@ broken_combination: } } @@ -124,7 +124,7 @@ if (tb_msg[NL80211_ATTR_FEATURE_FLAGS]) { unsigned int features = nla_get_u32(tb_msg[NL80211_ATTR_FEATURE_FLAGS]); -@@ -624,6 +635,7 @@ broken_combination: +@@ -627,6 +638,7 @@ broken_combination: if (features & NL80211_FEATURE_ND_RANDOM_MAC_ADDR) printf("\tDevice supports randomizing MAC-addr in net-detect scans.\n"); } @@ -132,7 +132,7 @@ if (tb_msg[NL80211_ATTR_TDLS_SUPPORT]) printf("\tDevice supports T-DLS.\n"); -@@ -732,6 +744,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP +@@ -762,6 +774,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP "List all wireless devices and their capabilities."); TOPLEVEL(phy, NULL, NL80211_CMD_GET_WIPHY, NLM_F_DUMP, CIB_NONE, handle_info, NULL); @@ -140,7 +140,7 @@ static int handle_commands(struct nl80211_state *state, struct nl_msg *msg, int argc, char **argv, enum id_input id) { -@@ -743,6 +756,7 @@ static int handle_commands(struct nl8021 +@@ -773,6 +786,7 @@ static int handle_commands(struct nl8021 } TOPLEVEL(commands, NULL, NL80211_CMD_GET_WIPHY, 0, CIB_NONE, handle_commands, "list all known commands and their decimal & hex value"); @@ -150,7 +150,7 @@ { --- a/scan.c +++ b/scan.c -@@ -1195,6 +1195,9 @@ static void print_ht_op(const uint8_t ty +@@ -1297,6 +1297,9 @@ static void print_ht_op(const uint8_t ty printf("\t\t * secondary channel offset: %s\n", ht_secondary_offset[data[1] & 0x3]); printf("\t\t * STA channel width: %s\n", sta_chan_width[(data[1] & 0x4)>>2]); @@ -160,7 +160,7 @@ printf("\t\t * RIFS: %d\n", (data[1] & 0x8)>>3); printf("\t\t * HT protection: %s\n", protection[data[2] & 0x3]); printf("\t\t * non-GF present: %d\n", (data[2] & 0x4) >> 2); -@@ -1522,6 +1525,14 @@ static void print_ie(const struct ie_pri +@@ -1707,6 +1710,14 @@ static void print_ie(const struct ie_pri static const struct ie_print ieprinters[] = { [0] = { "SSID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), }, @@ -175,12 +175,15 @@ [1] = { "Supported rates", print_supprates, 0, 255, BIT(PRINT_SCAN), }, [3] = { "DS Parameter set", print_ds, 1, 1, BIT(PRINT_SCAN), }, [5] = { "TIM", print_tim, 4, 255, BIT(PRINT_SCAN), }, -@@ -1531,21 +1542,15 @@ static const struct ie_print ieprinters[ +@@ -1716,26 +1727,20 @@ static const struct ie_print ieprinters[ [32] = { "Power constraint", print_powerconstraint, 1, 1, BIT(PRINT_SCAN), }, [35] = { "TPC report", print_tpcreport, 2, 2, BIT(PRINT_SCAN), }, [42] = { "ERP", print_erp, 1, 255, BIT(PRINT_SCAN), }, - [45] = { "HT capabilities", print_ht_capa, 26, 26, BIT(PRINT_SCAN), }, [47] = { "ERP D4.0", print_erp, 1, 255, BIT(PRINT_SCAN), }, + [51] = { "AP Channel Report", print_ap_channel_report, 1, 255, BIT(PRINT_SCAN), }, + [59] = { "Supported operating classes", print_supp_op_classes, 1, 255, BIT(PRINT_SCAN), }, + [66] = { "Measurement Pilot Transmission", print_measurement_pilot_tx, 1, 255, BIT(PRINT_SCAN), }, [74] = { "Overlapping BSS scan params", print_obss_scan_params, 14, 255, BIT(PRINT_SCAN), }, - [61] = { "HT operation", print_ht_op, 22, 22, BIT(PRINT_SCAN), }, - [62] = { "Secondary Channel Offset", print_secchan_offs, 1, 1, BIT(PRINT_SCAN), }, @@ -188,17 +191,19 @@ - [192] = { "VHT operation", print_vht_oper, 5, 255, BIT(PRINT_SCAN), }, - [48] = { "RSN", print_rsn, 2, 255, BIT(PRINT_SCAN), }, [50] = { "Extended supported rates", print_supprates, 0, 255, BIT(PRINT_SCAN), }, + [70] = { "RM enabled capabilities", print_rm_enabled_capabilities, 5, 5, BIT(PRINT_SCAN), }, [113] = { "MESH Configuration", print_mesh_conf, 7, 7, BIT(PRINT_SCAN), }, - [114] = { "MESH ID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), }, [127] = { "Extended capabilities", print_capabilities, 0, 255, BIT(PRINT_SCAN), }, [107] = { "802.11u Interworking", print_interworking, 0, 255, BIT(PRINT_SCAN), }, [108] = { "802.11u Advertisement", print_11u_advert, 0, 255, BIT(PRINT_SCAN), }, - [111] = { "802.11u Roaming Consortium", print_11u_rcon, 0, 255, BIT(PRINT_SCAN), }, + [111] = { "802.11u Roaming Consortium", print_11u_rcon, 2, 255, BIT(PRINT_SCAN), }, + [195] = { "Transmit Power Envelope", print_tx_power_envelope, 2, 5, BIT(PRINT_SCAN), }, +#endif }; static void print_wifi_wpa(const uint8_t type, uint8_t len, const uint8_t *data, -@@ -2024,6 +2029,7 @@ void print_ies(unsigned char *ie, int ie +@@ -2279,6 +2284,7 @@ void print_ies(unsigned char *ie, int ie ieprinters[ie[0]].flags & BIT(ptype)) { print_ie(&ieprinters[ie[0]], ie[0], ie[1], ie + 2, &ie_buffer); @@ -206,7 +211,7 @@ } else if (ie[0] == 221 /* vendor */) { print_vendor(ie[1], ie + 2, unknown, ptype); } else if (unknown) { -@@ -2033,6 +2039,7 @@ void print_ies(unsigned char *ie, int ie +@@ -2288,6 +2294,7 @@ void print_ies(unsigned char *ie, int ie for (i=0; i [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz] [beacons ] [block-tx]\n" -@@ -727,3 +730,4 @@ COMMAND(switch, freq, - "Switch the operating channel by sending a channel switch announcement (CSA)."); - COMMAND(switch, channel, " [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz] [beacons ] [block-tx]", - NL80211_CMD_CHANNEL_SWITCH, 0, CIB_NETDEV, handle_chan, NULL); +@@ -956,3 +959,4 @@ COMMAND(set, tidconf, "[peer /dev/null + ip link set $pi_ifname down + elif [ -n "$pi_ifname" ]; then + ip -4 addr flush dev $pi_ifname + fi +} diff --git a/target/linux/ath25/base-files/lib/upgrade/platform.sh b/target/linux/ath25/base-files/lib/upgrade/platform.sh new file mode 100644 index 0000000000..778bbf5a39 --- /dev/null +++ b/target/linux/ath25/base-files/lib/upgrade/platform.sh @@ -0,0 +1,76 @@ +CI_BLKSZ=65536 +CI_LDADR=0x80041000 + +platform_find_partitions() { + local first dev size erasesize name + while read dev size erasesize name; do + name=${name#'"'}; name=${name%'"'} + case "$name" in + vmlinux.bin.l7|kernel|linux|rootfs) + if [ -z "$first" ]; then + first="$name" + else + echo "$erasesize:$first:$name" + break + fi + ;; + esac + done < /proc/mtd +} + +platform_find_kernelpart() { + local part + for part in "${1%:*}" "${1#*:}"; do + case "$part" in + vmlinux.bin.l7|kernel|linux) + echo "$part" + break + ;; + esac + done +} + +platform_check_image() { + [ "$#" -gt 1 ] && return 1 + + case "$(get_magic_word "$1")" in + # Combined Image + 4349) + local md5_img=$(dd if="$1" bs=2 skip=9 count=16 2>/dev/null) + local md5_chk=$(dd if="$1" bs=$CI_BLKSZ skip=1 2>/dev/null | md5sum -); md5_chk="${md5_chk%% *}" + + if [ -n "$md5_img" -a -n "$md5_chk" ] && [ "$md5_img" = "$md5_chk" ]; then + return 0 + else + echo "Invalid image. Contents do not match checksum (image:$md5_img calculated:$md5_chk)" + return 1 + fi + ;; + *) + echo "Invalid image. Use combined .img files on this platform" + return 1 + ;; + esac +} + +platform_do_upgrade() { + local partitions=$(platform_find_partitions) + local kernelpart=$(platform_find_kernelpart "${partitions#*:}") + local erase_size=$((0x${partitions%%:*})); partitions="${partitions#*:}" + local kern_length=0x$(dd if="$1" bs=2 skip=1 count=4 2>/dev/null) + local kern_blocks=$(($kern_length / $CI_BLKSZ)) + local root_blocks=$((0x$(dd if="$1" bs=2 skip=5 count=4 2>/dev/null) / $CI_BLKSZ)) + + if [ -n "$partitions" ] && [ -n "$kernelpart" ] && \ + [ ${kern_blocks:-0} -gt 0 ] && \ + [ ${root_blocks:-0} -gt ${kern_blocks:-0} ] && \ + [ ${erase_size:-0} -gt 0 ]; + then + local append="" + [ -f "$UPGRADE_BACKUP" ] && append="-j $UPGRADE_BACKUP" + + ( dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null; \ + dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null ) | \ + mtd -r $append -F$kernelpart:$kern_length:$CI_LDADR,rootfs write - $partitions + fi +} diff --git a/target/linux/ath25/config-5.4 b/target/linux/ath25/config-5.4 new file mode 100644 index 0000000000..f59f48f655 --- /dev/null +++ b/target/linux/ath25/config-5.4 @@ -0,0 +1,181 @@ +CONFIG_ADM6996_PHY=y +CONFIG_AR2315_WDT=y +CONFIG_AR8216_PHY=y +CONFIG_ARCH_32BIT_OFF_T=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_ARCH_HAS_DMA_COHERENT_TO_PFN=y +CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y +CONFIG_ARCH_HAS_DMA_WRITE_COMBINE=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_ARCH_HAS_PHYS_TO_DMA=y +CONFIG_ARCH_HAS_PTE_SPECIAL=y +CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y +CONFIG_ARCH_HAS_UNCACHED_SEGMENT=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_MMAP_RND_BITS_MAX=15 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15 +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_USE_MEMREMAP_PROT=y +CONFIG_ARCH_USE_QUEUED_RWLOCKS=y +CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y +CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ATH25=y +CONFIG_BLK_MQ_PCI=y +CONFIG_CEVT_R4K=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2" +CONFIG_CMDLINE_BOOL=y +# CONFIG_CMDLINE_OVERRIDE is not set +CONFIG_COMPAT_32BIT_TIME=y +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_CPU_GENERIC_DUMP_TLB=y +CONFIG_CPU_HAS_LOAD_STORE_LR=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPS32_R1=y +CONFIG_CPU_MIPSR1=y +CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y +CONFIG_CPU_R4K_CACHE_TLB=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CSRC_R4K=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NONCOHERENT_CACHE_SYNC=y +CONFIG_EARLY_PRINTK=y +CONFIG_EFI_EARLYCON=y +CONFIG_ETHERNET_PACKET_MANGLE=y +CONFIG_FONT_8x16=y +CONFIG_FONT_AUTOSELECT=y +CONFIG_FONT_SUPPORT=y +CONFIG_FORCE_PCI=y +CONFIG_FW_LOADER_PAGED_BUF=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_GETTIMEOFDAY=y +CONFIG_GENERIC_IOMAP=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_LIB_ASHLDI3=y +CONFIG_GENERIC_LIB_ASHRDI3=y +CONFIG_GENERIC_LIB_CMPDI2=y +CONFIG_GENERIC_LIB_LSHRDI3=y +CONFIG_GENERIC_LIB_UCMPDI2=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_AR2315=y +CONFIG_GPIO_AR5312=y +CONFIG_HANDLE_DOMAIN_IRQ=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAVE_ARCH_COMPILER_H=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_ASM_MODVERSIONS=y +CONFIG_HAVE_CBPF_JIT=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_COPY_THREAD_TLS=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DEBUG_STACKOVERFLOW=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FAST_GUP=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_GENERIC_VDSO=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PCI=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_RSEQ=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HW_RANDOM=y +CONFIG_HZ=250 +CONFIG_HZ_250=y +CONFIG_HZ_PERIODIC=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IP17XX_PHY=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_MIPS_CPU=y +CONFIG_IRQ_WORK=y +CONFIG_LEDS_GPIO=y +CONFIG_LOCK_DEBUGGING_SUPPORT=y +CONFIG_MDIO_BUS=y +CONFIG_MDIO_DEVICE=y +CONFIG_MEMFD_CREATE=y +CONFIG_MIGRATION=y +CONFIG_MIPS=y +CONFIG_MIPS_ASID_BITS=8 +CONFIG_MIPS_ASID_SHIFT=0 +CONFIG_MIPS_CBPF_JIT=y +CONFIG_MIPS_CLOCK_VSYSCALL=y +# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set +CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_MTD_AR2315=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +# CONFIG_MTD_CFI_GEOMETRY is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_MYLOADER_PARTS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3 +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MVSWITCH_PHY=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NET_AR231X=y +CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y +# CONFIG_OF is not set +CONFIG_PCI=y +CONFIG_PCI_AR2315=y +CONFIG_PCI_DISABLE_COMMON_QUIRKS=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_DRIVERS_LEGACY=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PGTABLE_LEVELS=2 +CONFIG_PHYLIB=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_MCTRL_GPIO=y +CONFIG_SOC_AR2315=y +CONFIG_SOC_AR5312=y +CONFIG_SRCU=y +# CONFIG_SWAP is not set +CONFIG_SWCONFIG=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_TARGET_ISA_REV=1 +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TINY_SRCU=y +CONFIG_USB_SUPPORT=y diff --git a/target/linux/ath25/image/Makefile b/target/linux/ath25/image/Makefile new file mode 100644 index 0000000000..afc6c91259 --- /dev/null +++ b/target/linux/ath25/image/Makefile @@ -0,0 +1,117 @@ +# +# Copyright (C) 2006-2010 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/image.mk + +define Build/mkfwimage + $(STAGING_DIR_HOST)/bin/mkfwimage \ + -B $(1).$(VERSION_DIST).$(REVISION) \ + -k $(IMAGE_KERNEL) \ + -r $(IMAGE_ROOTFS) \ + -o $@.new && \ + mv $@.new $@ +endef + +define Build/combined-image + -sh $(TOPDIR)/scripts/combined-image.sh \ + "$(IMAGE_KERNEL)" \ + "$(IMAGE_ROOTFS)" \ + "$@.new" && \ + mv $@.new $@ +endef + +define Build/mkmylofw + $(STAGING_DIR_HOST)/bin/mkmylofw -B $(1) \ + -p0x020000:0x130000:ah:0x80041000:linux:$(IMAGE_KERNEL) \ + -p0x150000:0x2a0000:::rootfs:$(IMAGE_ROOTFS) \ + $@.new && \ + mv $@.new $@ +endef + +define Build/gzip-kernel + gzip -9n -c $@ > $@.gz + dd if=$@.gz of=$@ bs=65536 conv=sync +endef + +define Build/lzma-kernel + $(STAGING_DIR_HOST)/bin/lzma e $@ $@.l7 + dd if=$@.l7 of=$@ bs=65536 conv=sync +endef + +define Build/copy-kernel + rm -f $@ $@.elf + cp $< $@ + cp $< $@.elf +endef + +define Build/elf-kernel + cp $(IMAGE_KERNEL).elf $@ +endef + + +define Device/Default + PROFILES = Default $$(DEVICE_NAME) + KERNEL := copy-kernel | lzma-kernel + IMAGES := sysupgrade.bin + FILESYSTEMS := squashfs +endef + +define Device/generic + DEVICE_VENDOR := Atheros + DEVICE_MODEL := Generic AR2xxx board + IMAGES := kernel.lzma kernel.elf kernel.gz rootfs.bin sysupgrade.bin + IMAGE/kernel.gz := elf-kernel | gzip-kernel + IMAGE/kernel.elf := elf-kernel + IMAGE/kernel.lzma := elf-kernel | lzma-kernel + IMAGE/rootfs.bin := append-rootfs | pad-rootfs | pad-to 128k + IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to 128k | combined-image + IMAGE_NAME = $$(IMAGE_PREFIX)-$$(if $$(findstring kernel,$$(2)),,$$(1)-)$$(2) +endef +TARGET_DEVICES += generic + +define Device/ubnt_picostation-2 + DEVICE_VENDOR := Ubiquiti + DEVICE_MODEL := Picostation 2 (XS2-8) + IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to 128k | mkfwimage XS2-8 -v XS2.ar2316 +endef +TARGET_DEVICES += ubnt_picostation-2 + +define Device/ubnt_nanostation-2 + DEVICE_VENDOR := Ubiquiti + DEVICE_MODEL := Nanostation 2 (XS2) + IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to 128k | mkfwimage XS2 -v XS2.ar2316 + DEFAULT := n +endef +TARGET_DEVICES += ubnt_nanostation-2 + +define Device/ubnt_nanostation-5 + DEVICE_VENDOR := Ubiquiti + DEVICE_MODEL := Nanostation 5 (XS5) + IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to 128k | mkfwimage XS5 -v XS5.ar2313 + DEFAULT := n +endef +TARGET_DEVICES += ubnt_nanostation-5 + +define Device/compex_np25g + DEVICE_VENDOR := Compex + DEVICE_MODEL := NP25G + KERNEL := kernel-bin | gzip-kernel + IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to 128k | mkmylofw np25g + BROKEN := y +endef +TARGET_DEVICES += compex_np25g + +define Device/compex_wpe53g + DEVICE_VENDOR := Compex + DEVICE_MODEL := WPE53G + KERNEL := kernel-bin | gzip-kernel + IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to 128k | mkmylofw wpe53g + BROKEN := y +endef +TARGET_DEVICES += compex_wpe53g + +$(eval $(call BuildImage)) diff --git a/target/linux/ath25/patches-5.4/107-ar5312_gpio.patch b/target/linux/ath25/patches-5.4/107-ar5312_gpio.patch new file mode 100644 index 0000000000..cd7b27d636 --- /dev/null +++ b/target/linux/ath25/patches-5.4/107-ar5312_gpio.patch @@ -0,0 +1,212 @@ +--- a/arch/mips/ath25/Kconfig ++++ b/arch/mips/ath25/Kconfig +@@ -2,6 +2,7 @@ + config SOC_AR5312 + bool "Atheros AR5312/AR2312+ SoC support" + depends on ATH25 ++ select GPIO_AR5312 + default y + + config SOC_AR2315 +--- a/arch/mips/ath25/ar5312.c ++++ b/arch/mips/ath25/ar5312.c +@@ -22,6 +22,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -180,6 +181,22 @@ static struct platform_device ar5312_phy + .num_resources = 1, + }; + ++static struct resource ar5312_gpio_res[] = { ++ { ++ .name = "ar5312-gpio", ++ .flags = IORESOURCE_MEM, ++ .start = AR5312_GPIO_BASE, ++ .end = AR5312_GPIO_BASE + AR5312_GPIO_SIZE - 1, ++ }, ++}; ++ ++static struct platform_device ar5312_gpio = { ++ .name = "ar5312-gpio", ++ .id = -1, ++ .resource = ar5312_gpio_res, ++ .num_resources = ARRAY_SIZE(ar5312_gpio_res), ++}; ++ + static void __init ar5312_flash_init(void) + { + void __iomem *flashctl_base; +@@ -247,6 +264,8 @@ void __init ar5312_init_devices(void) + + platform_device_register(&ar5312_physmap_flash); + ++ platform_device_register(&ar5312_gpio); ++ + switch (ath25_soc) { + case ATH25_SOC_AR5312: + if (!ath25_board.radio) +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -113,6 +113,13 @@ config GPIO_AMDPT + driver for GPIO functionality on Promontory IOHub + Require ACPI ASL code to enumerate as a platform device. + ++config GPIO_AR5312 ++ bool "AR5312 SoC GPIO support" ++ default y if SOC_AR5312 ++ depends on SOC_AR5312 ++ help ++ Say yes here to enable GPIO support for Atheros AR5312/AR2312+ SoCs. ++ + config GPIO_ASPEED + tristate "Aspeed GPIO support" + depends on (ARCH_ASPEED || COMPILE_TEST) && OF_GPIO +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -30,6 +30,7 @@ obj-$(CONFIG_GPIO_ALTERA) += gpio-alt + obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o + obj-$(CONFIG_GPIO_AMD_FCH) += gpio-amd-fch.o + obj-$(CONFIG_GPIO_AMDPT) += gpio-amdpt.o ++obj-$(CONFIG_GPIO_AR5312) += gpio-ar5312.o + obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o + obj-$(CONFIG_GPIO_ASPEED) += gpio-aspeed.o + obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o +--- /dev/null ++++ b/drivers/gpio/gpio-ar5312.c +@@ -0,0 +1,121 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. ++ * Copyright (C) 2006 FON Technology, SL. ++ * Copyright (C) 2006 Imre Kaloz ++ * Copyright (C) 2006-2009 Felix Fietkau ++ * Copyright (C) 2012 Alexandros C. Couloumbis ++ */ ++ ++#include ++#include ++#include ++#include ++ ++#define DRIVER_NAME "ar5312-gpio" ++ ++#define AR5312_GPIO_DO 0x00 /* output register */ ++#define AR5312_GPIO_DI 0x04 /* intput register */ ++#define AR5312_GPIO_CR 0x08 /* control register */ ++ ++#define AR5312_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ ++#define AR5312_GPIO_CR_O(x) (0 << (x)) /* mask for output */ ++#define AR5312_GPIO_CR_I(x) (1 << (x)) /* mask for input */ ++#define AR5312_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */ ++#define AR5312_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */ ++ ++#define AR5312_GPIO_NUM 8 ++ ++static void __iomem *ar5312_mem; ++ ++static inline u32 ar5312_gpio_reg_read(unsigned reg) ++{ ++ return __raw_readl(ar5312_mem + reg); ++} ++ ++static inline void ar5312_gpio_reg_write(unsigned reg, u32 val) ++{ ++ __raw_writel(val, ar5312_mem + reg); ++} ++ ++static inline void ar5312_gpio_reg_mask(unsigned reg, u32 mask, u32 val) ++{ ++ ar5312_gpio_reg_write(reg, (ar5312_gpio_reg_read(reg) & ~mask) | val); ++} ++ ++static int ar5312_gpio_get_val(struct gpio_chip *chip, unsigned gpio) ++{ ++ return (ar5312_gpio_reg_read(AR5312_GPIO_DI) >> gpio) & 1; ++} ++ ++static void ar5312_gpio_set_val(struct gpio_chip *chip, unsigned gpio, int val) ++{ ++ u32 reg = ar5312_gpio_reg_read(AR5312_GPIO_DO); ++ ++ reg = val ? reg | (1 << gpio) : reg & ~(1 << gpio); ++ ar5312_gpio_reg_write(AR5312_GPIO_DO, reg); ++} ++ ++static int ar5312_gpio_dir_in(struct gpio_chip *chip, unsigned gpio) ++{ ++ ar5312_gpio_reg_mask(AR5312_GPIO_CR, 0, 1 << gpio); ++ return 0; ++} ++ ++static int ar5312_gpio_dir_out(struct gpio_chip *chip, unsigned gpio, int val) ++{ ++ ar5312_gpio_reg_mask(AR5312_GPIO_CR, 1 << gpio, 0); ++ ar5312_gpio_set_val(chip, gpio, val); ++ return 0; ++} ++ ++static struct gpio_chip ar5312_gpio_chip = { ++ .label = DRIVER_NAME, ++ .direction_input = ar5312_gpio_dir_in, ++ .direction_output = ar5312_gpio_dir_out, ++ .set = ar5312_gpio_set_val, ++ .get = ar5312_gpio_get_val, ++ .base = 0, ++ .ngpio = AR5312_GPIO_NUM, ++}; ++ ++static int ar5312_gpio_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct resource *res; ++ int ret; ++ ++ if (ar5312_mem) ++ return -EBUSY; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ ar5312_mem = devm_ioremap_resource(dev, res); ++ if (IS_ERR(ar5312_mem)) ++ return PTR_ERR(ar5312_mem); ++ ++ ar5312_gpio_chip.parent = dev; ++ ret = gpiochip_add(&ar5312_gpio_chip); ++ if (ret) { ++ dev_err(dev, "failed to add gpiochip\n"); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static struct platform_driver ar5312_gpio_driver = { ++ .probe = ar5312_gpio_probe, ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ } ++}; ++ ++static int __init ar5312_gpio_init(void) ++{ ++ return platform_driver_register(&ar5312_gpio_driver); ++} ++subsys_initcall(ar5312_gpio_init); +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -189,6 +189,7 @@ config ATH25 + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT ++ select GPIOLIB + select IRQ_MIPS_CPU + select IRQ_DOMAIN + select SYS_HAS_CPU_MIPS32_R1 diff --git a/target/linux/ath25/patches-5.4/108-ar2315_gpio.patch b/target/linux/ath25/patches-5.4/108-ar2315_gpio.patch new file mode 100644 index 0000000000..e198cecf15 --- /dev/null +++ b/target/linux/ath25/patches-5.4/108-ar2315_gpio.patch @@ -0,0 +1,363 @@ +--- a/arch/mips/ath25/Kconfig ++++ b/arch/mips/ath25/Kconfig +@@ -8,6 +8,7 @@ config SOC_AR5312 + config SOC_AR2315 + bool "Atheros AR2315+ SoC support" + depends on ATH25 ++ select GPIO_AR2315 + default y + + config PCI_AR2315 +--- a/arch/mips/ath25/ar2315.c ++++ b/arch/mips/ath25/ar2315.c +@@ -21,6 +21,8 @@ + #include + #include + #include ++#include ++#include + #include + #include + #include +@@ -167,11 +169,42 @@ void __init ar2315_arch_init_irq(void) + ar2315_misc_irq_domain = domain; + } + ++static struct resource ar2315_gpio_res[] = { ++ { ++ .name = "ar2315-gpio", ++ .flags = IORESOURCE_MEM, ++ .start = AR2315_RST_BASE + AR2315_GPIO, ++ .end = AR2315_RST_BASE + AR2315_GPIO + 0x10 - 1, ++ }, ++ { ++ .name = "ar2315-gpio", ++ .flags = IORESOURCE_IRQ, ++ }, ++ { ++ .name = "ar2315-gpio-irq-base", ++ .flags = IORESOURCE_IRQ, ++ .start = AR231X_GPIO_IRQ_BASE, ++ .end = AR231X_GPIO_IRQ_BASE, ++ } ++}; ++ ++static struct platform_device ar2315_gpio = { ++ .id = -1, ++ .name = "ar2315-gpio", ++ .resource = ar2315_gpio_res, ++ .num_resources = ARRAY_SIZE(ar2315_gpio_res) ++}; ++ + void __init ar2315_init_devices(void) + { + /* Find board configuration */ + ath25_find_config(AR2315_SPI_READ_BASE, AR2315_SPI_READ_SIZE); + ++ ar2315_gpio_res[1].start = irq_create_mapping(ar2315_misc_irq_domain, ++ AR2315_MISC_IRQ_GPIO); ++ ar2315_gpio_res[1].end = ar2315_gpio_res[1].start; ++ platform_device_register(&ar2315_gpio); ++ + ath25_add_wmac(0, AR2315_WLAN0_BASE, AR2315_IRQ_WLAN0); + } + +@@ -187,8 +220,8 @@ static void ar2315_restart(char *command + /* Cold reset does not work on the AR2315/6, use the GPIO reset bits + * a workaround. Give it some time to attempt a gpio based hardware + * reset (atheros reference design workaround) */ +- +- /* TODO: implement the GPIO reset workaround */ ++ gpio_request_one(AR2315_RESET_GPIO, GPIOF_OUT_INIT_LOW, "Reset"); ++ mdelay(100); + + /* Some boards (e.g. Senao EOC-2610) don't implement the reset logic + * workaround. Attempt to jump to the mips reset location - +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -113,6 +113,13 @@ config GPIO_AMDPT + driver for GPIO functionality on Promontory IOHub + Require ACPI ASL code to enumerate as a platform device. + ++config GPIO_AR2315 ++ bool "AR2315 SoC GPIO support" ++ default y if SOC_AR2315 ++ depends on SOC_AR2315 ++ help ++ Say yes here to enable GPIO support for Atheros AR2315+ SoCs. ++ + config GPIO_AR5312 + bool "AR5312 SoC GPIO support" + default y if SOC_AR5312 +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -30,6 +30,7 @@ obj-$(CONFIG_GPIO_ALTERA) += gpio-alt + obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o + obj-$(CONFIG_GPIO_AMD_FCH) += gpio-amd-fch.o + obj-$(CONFIG_GPIO_AMDPT) += gpio-amdpt.o ++obj-$(CONFIG_GPIO_AR2315) += gpio-ar2315.o + obj-$(CONFIG_GPIO_AR5312) += gpio-ar5312.o + obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o + obj-$(CONFIG_GPIO_ASPEED) += gpio-aspeed.o +--- /dev/null ++++ b/drivers/gpio/gpio-ar2315.c +@@ -0,0 +1,233 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. ++ * Copyright (C) 2006 FON Technology, SL. ++ * Copyright (C) 2006 Imre Kaloz ++ * Copyright (C) 2006 Felix Fietkau ++ * Copyright (C) 2012 Alexandros C. Couloumbis ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#define DRIVER_NAME "ar2315-gpio" ++ ++#define AR2315_GPIO_DI 0x0000 ++#define AR2315_GPIO_DO 0x0008 ++#define AR2315_GPIO_DIR 0x0010 ++#define AR2315_GPIO_INT 0x0018 ++ ++#define AR2315_GPIO_DIR_M(x) (1 << (x)) /* mask for i/o */ ++#define AR2315_GPIO_DIR_O(x) (1 << (x)) /* output */ ++#define AR2315_GPIO_DIR_I(x) (0) /* input */ ++ ++#define AR2315_GPIO_INT_NUM_M 0x3F /* mask for GPIO num */ ++#define AR2315_GPIO_INT_TRIG(x) ((x) << 6) /* interrupt trigger */ ++#define AR2315_GPIO_INT_TRIG_M (0x3 << 6) /* mask for int trig */ ++ ++#define AR2315_GPIO_INT_TRIG_OFF 0 /* Triggerring off */ ++#define AR2315_GPIO_INT_TRIG_LOW 1 /* Low Level Triggered */ ++#define AR2315_GPIO_INT_TRIG_HIGH 2 /* High Level Triggered */ ++#define AR2315_GPIO_INT_TRIG_EDGE 3 /* Edge Triggered */ ++ ++#define AR2315_GPIO_NUM 22 ++ ++static u32 ar2315_gpio_intmask; ++static u32 ar2315_gpio_intval; ++static unsigned ar2315_gpio_irq_base; ++static void __iomem *ar2315_mem; ++ ++static inline u32 ar2315_gpio_reg_read(unsigned reg) ++{ ++ return __raw_readl(ar2315_mem + reg); ++} ++ ++static inline void ar2315_gpio_reg_write(unsigned reg, u32 val) ++{ ++ __raw_writel(val, ar2315_mem + reg); ++} ++ ++static inline void ar2315_gpio_reg_mask(unsigned reg, u32 mask, u32 val) ++{ ++ ar2315_gpio_reg_write(reg, (ar2315_gpio_reg_read(reg) & ~mask) | val); ++} ++ ++static void ar2315_gpio_irq_handler(struct irq_desc *desc) ++{ ++ u32 pend; ++ int bit = -1; ++ ++ /* only do one gpio interrupt at a time */ ++ pend = ar2315_gpio_reg_read(AR2315_GPIO_DI); ++ pend ^= ar2315_gpio_intval; ++ pend &= ar2315_gpio_intmask; ++ ++ if (pend) { ++ bit = fls(pend) - 1; ++ pend &= ~(1 << bit); ++ ar2315_gpio_intval ^= (1 << bit); ++ } ++ ++ /* Enable interrupt with edge detection */ ++ if ((ar2315_gpio_reg_read(AR2315_GPIO_DIR) & AR2315_GPIO_DIR_M(bit)) != ++ AR2315_GPIO_DIR_I(bit)) ++ return; ++ ++ if (bit >= 0) ++ generic_handle_irq(ar2315_gpio_irq_base + bit); ++} ++ ++static void ar2315_gpio_int_setup(unsigned gpio, int trig) ++{ ++ u32 reg = ar2315_gpio_reg_read(AR2315_GPIO_INT); ++ ++ reg &= ~(AR2315_GPIO_INT_NUM_M | AR2315_GPIO_INT_TRIG_M); ++ reg |= gpio | AR2315_GPIO_INT_TRIG(trig); ++ ar2315_gpio_reg_write(AR2315_GPIO_INT, reg); ++} ++ ++static void ar2315_gpio_irq_unmask(struct irq_data *d) ++{ ++ unsigned gpio = d->irq - ar2315_gpio_irq_base; ++ u32 dir = ar2315_gpio_reg_read(AR2315_GPIO_DIR); ++ ++ /* Enable interrupt with edge detection */ ++ if ((dir & AR2315_GPIO_DIR_M(gpio)) != AR2315_GPIO_DIR_I(gpio)) ++ return; ++ ++ ar2315_gpio_intmask |= (1 << gpio); ++ ar2315_gpio_int_setup(gpio, AR2315_GPIO_INT_TRIG_EDGE); ++} ++ ++static void ar2315_gpio_irq_mask(struct irq_data *d) ++{ ++ unsigned gpio = d->irq - ar2315_gpio_irq_base; ++ ++ /* Disable interrupt */ ++ ar2315_gpio_intmask &= ~(1 << gpio); ++ ar2315_gpio_int_setup(gpio, AR2315_GPIO_INT_TRIG_OFF); ++} ++ ++static struct irq_chip ar2315_gpio_irq_chip = { ++ .name = DRIVER_NAME, ++ .irq_unmask = ar2315_gpio_irq_unmask, ++ .irq_mask = ar2315_gpio_irq_mask, ++}; ++ ++static void ar2315_gpio_irq_init(unsigned irq) ++{ ++ unsigned i; ++ ++ ar2315_gpio_intval = ar2315_gpio_reg_read(AR2315_GPIO_DI); ++ for (i = 0; i < AR2315_GPIO_NUM; i++) { ++ unsigned _irq = ar2315_gpio_irq_base + i; ++ ++ irq_set_chip_and_handler(_irq, &ar2315_gpio_irq_chip, ++ handle_level_irq); ++ } ++ irq_set_chained_handler(irq, ar2315_gpio_irq_handler); ++} ++ ++static int ar2315_gpio_get_val(struct gpio_chip *chip, unsigned gpio) ++{ ++ return (ar2315_gpio_reg_read(AR2315_GPIO_DI) >> gpio) & 1; ++} ++ ++static void ar2315_gpio_set_val(struct gpio_chip *chip, unsigned gpio, int val) ++{ ++ u32 reg = ar2315_gpio_reg_read(AR2315_GPIO_DO); ++ ++ reg = val ? reg | (1 << gpio) : reg & ~(1 << gpio); ++ ar2315_gpio_reg_write(AR2315_GPIO_DO, reg); ++} ++ ++static int ar2315_gpio_dir_in(struct gpio_chip *chip, unsigned gpio) ++{ ++ ar2315_gpio_reg_mask(AR2315_GPIO_DIR, 1 << gpio, 0); ++ return 0; ++} ++ ++static int ar2315_gpio_dir_out(struct gpio_chip *chip, unsigned gpio, int val) ++{ ++ ar2315_gpio_reg_mask(AR2315_GPIO_DIR, 0, 1 << gpio); ++ ar2315_gpio_set_val(chip, gpio, val); ++ return 0; ++} ++ ++static int ar2315_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) ++{ ++ return ar2315_gpio_irq_base + gpio; ++} ++ ++static struct gpio_chip ar2315_gpio_chip = { ++ .label = DRIVER_NAME, ++ .direction_input = ar2315_gpio_dir_in, ++ .direction_output = ar2315_gpio_dir_out, ++ .set = ar2315_gpio_set_val, ++ .get = ar2315_gpio_get_val, ++ .to_irq = ar2315_gpio_to_irq, ++ .base = 0, ++ .ngpio = AR2315_GPIO_NUM, ++}; ++ ++static int ar2315_gpio_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct resource *res; ++ unsigned irq; ++ int ret; ++ ++ if (ar2315_mem) ++ return -EBUSY; ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, ++ "ar2315-gpio-irq-base"); ++ if (!res) { ++ dev_err(dev, "not found GPIO IRQ base\n"); ++ return -ENXIO; ++ } ++ ar2315_gpio_irq_base = res->start; ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, DRIVER_NAME); ++ if (!res) { ++ dev_err(dev, "not found IRQ number\n"); ++ return -ENXIO; ++ } ++ irq = res->start; ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, DRIVER_NAME); ++ ar2315_mem = devm_ioremap_resource(dev, res); ++ if (IS_ERR(ar2315_mem)) ++ return PTR_ERR(ar2315_mem); ++ ++ ar2315_gpio_chip.parent = dev; ++ ret = gpiochip_add(&ar2315_gpio_chip); ++ if (ret) { ++ dev_err(dev, "failed to add gpiochip\n"); ++ return ret; ++ } ++ ++ ar2315_gpio_irq_init(irq); ++ ++ return 0; ++} ++ ++static struct platform_driver ar2315_gpio_driver = { ++ .probe = ar2315_gpio_probe, ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ } ++}; ++ ++static int __init ar2315_gpio_init(void) ++{ ++ return platform_driver_register(&ar2315_gpio_driver); ++} ++subsys_initcall(ar2315_gpio_init); +--- a/arch/mips/ath25/devices.h ++++ b/arch/mips/ath25/devices.h +@@ -4,6 +4,11 @@ + + #include + ++#define AR231X_GPIO_IRQ_BASE 0x30 ++ ++/* GPIO number for AR2315/16 reset issue workaround */ ++#define AR2315_RESET_GPIO 5 ++ + #define ATH25_REG_MS(_val, _field) (((_val) & _field##_M) >> _field##_S) + + #define ATH25_IRQ_CPU_CLOCK (MIPS_CPU_IRQ_BASE + 7) /* C0_CAUSE: 0x8000 */ +--- a/arch/mips/ath25/ar2315_regs.h ++++ b/arch/mips/ath25/ar2315_regs.h +@@ -315,6 +315,9 @@ + #define AR2315_MEM_CFG_BANKADDR_BITS_M 0x00000018 + #define AR2315_MEM_CFG_BANKADDR_BITS_S 3 + ++/* GPIO MMR base address */ ++#define AR2315_GPIO 0x0088 ++ + /* + * Local Bus Interface Registers + */ diff --git a/target/linux/ath25/patches-5.4/110-ar2313_ethernet.patch b/target/linux/ath25/patches-5.4/110-ar2313_ethernet.patch new file mode 100644 index 0000000000..57c18abf69 --- /dev/null +++ b/target/linux/ath25/patches-5.4/110-ar2313_ethernet.patch @@ -0,0 +1,1736 @@ +--- a/drivers/net/ethernet/atheros/Makefile ++++ b/drivers/net/ethernet/atheros/Makefile +@@ -9,3 +9,4 @@ obj-$(CONFIG_ATL2) += atlx/ + obj-$(CONFIG_ATL1E) += atl1e/ + obj-$(CONFIG_ATL1C) += atl1c/ + obj-$(CONFIG_ALX) += alx/ ++obj-$(CONFIG_NET_AR231X) += ar231x/ +--- a/drivers/net/ethernet/atheros/Kconfig ++++ b/drivers/net/ethernet/atheros/Kconfig +@@ -6,7 +6,7 @@ + config NET_VENDOR_ATHEROS + bool "Atheros devices" + default y +- depends on (PCI || ATH79) ++ depends on (PCI || ATH25 || ATH79) + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y. + +@@ -87,4 +87,10 @@ config ALX + To compile this driver as a module, choose M here. The module + will be called alx. + ++config NET_AR231X ++ tristate "Atheros AR231X built-in Ethernet support" ++ depends on ATH25 ++ help ++ Support for the AR231x/531x ethernet controller ++ + endif # NET_VENDOR_ATHEROS +--- /dev/null ++++ b/drivers/net/ethernet/atheros/ar231x/Makefile +@@ -0,0 +1 @@ ++obj-$(CONFIG_NET_AR231X) += ar231x.o +--- /dev/null ++++ b/drivers/net/ethernet/atheros/ar231x/ar231x.c +@@ -0,0 +1,1120 @@ ++/* ++ * ar231x.c: Linux driver for the Atheros AR231x Ethernet device. ++ * ++ * Copyright (C) 2004 by Sameer Dekate ++ * Copyright (C) 2006 Imre Kaloz ++ * Copyright (C) 2006-2009 Felix Fietkau ++ * ++ * Thanks to Atheros for providing hardware and documentation ++ * enabling me to write this driver. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * Additional credits: ++ * This code is taken from John Taylor's Sibyte driver and then ++ * modified for the AR2313. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define AR2313_MTU 1692 ++#define AR2313_PRIOS 1 ++#define AR2313_QUEUES (2*AR2313_PRIOS) ++#define AR2313_DESCR_ENTRIES 64 ++ ++#ifndef min ++#define min(a, b) (((a) < (b)) ? (a) : (b)) ++#endif ++ ++#ifndef SMP_CACHE_BYTES ++#define SMP_CACHE_BYTES L1_CACHE_BYTES ++#endif ++ ++#define AR2313_MBOX_SET_BIT 0x8 ++ ++#include "ar231x.h" ++ ++/** ++ * New interrupt handler strategy: ++ * ++ * An old interrupt handler worked using the traditional method of ++ * replacing an skbuff with a new one when a packet arrives. However ++ * the rx rings do not need to contain a static number of buffer ++ * descriptors, thus it makes sense to move the memory allocation out ++ * of the main interrupt handler and do it in a bottom half handler ++ * and only allocate new buffers when the number of buffers in the ++ * ring is below a certain threshold. In order to avoid starving the ++ * NIC under heavy load it is however necessary to force allocation ++ * when hitting a minimum threshold. The strategy for alloction is as ++ * follows: ++ * ++ * RX_LOW_BUF_THRES - allocate buffers in the bottom half ++ * RX_PANIC_LOW_THRES - we are very low on buffers, allocate ++ * the buffers in the interrupt handler ++ * RX_RING_THRES - maximum number of buffers in the rx ring ++ * ++ * One advantagous side effect of this allocation approach is that the ++ * entire rx processing can be done without holding any spin lock ++ * since the rx rings and registers are totally independent of the tx ++ * ring and its registers. This of course includes the kmalloc's of ++ * new skb's. Thus start_xmit can run in parallel with rx processing ++ * and the memory allocation on SMP systems. ++ * ++ * Note that running the skb reallocation in a bottom half opens up ++ * another can of races which needs to be handled properly. In ++ * particular it can happen that the interrupt handler tries to run ++ * the reallocation while the bottom half is either running on another ++ * CPU or was interrupted on the same CPU. To get around this the ++ * driver uses bitops to prevent the reallocation routines from being ++ * reentered. ++ * ++ * TX handling can also be done without holding any spin lock, wheee ++ * this is fun! since tx_csm is only written to by the interrupt ++ * handler. ++ */ ++ ++/** ++ * Threshold values for RX buffer allocation - the low water marks for ++ * when to start refilling the rings are set to 75% of the ring ++ * sizes. It seems to make sense to refill the rings entirely from the ++ * intrrupt handler once it gets below the panic threshold, that way ++ * we don't risk that the refilling is moved to another CPU when the ++ * one running the interrupt handler just got the slab code hot in its ++ * cache. ++ */ ++#define RX_RING_SIZE AR2313_DESCR_ENTRIES ++#define RX_PANIC_THRES (RX_RING_SIZE/4) ++#define RX_LOW_THRES ((3*RX_RING_SIZE)/4) ++#define CRC_LEN 4 ++#define RX_OFFSET 2 ++ ++#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) ++#define VLAN_HDR 4 ++#else ++#define VLAN_HDR 0 ++#endif ++ ++#define AR2313_BUFSIZE (AR2313_MTU + VLAN_HDR + ETH_HLEN + CRC_LEN + \ ++ RX_OFFSET) ++ ++#ifdef MODULE ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Sameer Dekate , Imre Kaloz , Felix Fietkau "); ++MODULE_DESCRIPTION("AR231x Ethernet driver"); ++#endif ++ ++#define virt_to_phys(x) ((u32)(x) & 0x1fffffff) ++ ++/* prototypes */ ++static void ar231x_halt(struct net_device *dev); ++static void rx_tasklet_func(unsigned long data); ++static void rx_tasklet_cleanup(struct net_device *dev); ++static void ar231x_multicast_list(struct net_device *dev); ++static void ar231x_tx_timeout(struct net_device *dev); ++ ++static int ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum); ++static int ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, ++ u16 value); ++static int ar231x_mdiobus_reset(struct mii_bus *bus); ++static int ar231x_mdiobus_probe(struct net_device *dev); ++static void ar231x_adjust_link(struct net_device *dev); ++ ++#ifndef ERR ++#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args) ++#endif ++ ++#ifdef CONFIG_NET_POLL_CONTROLLER ++static void ++ar231x_netpoll(struct net_device *dev) ++{ ++ unsigned long flags; ++ ++ local_irq_save(flags); ++ ar231x_interrupt(dev->irq, dev); ++ local_irq_restore(flags); ++} ++#endif ++ ++static const struct net_device_ops ar231x_ops = { ++ .ndo_open = ar231x_open, ++ .ndo_stop = ar231x_close, ++ .ndo_start_xmit = ar231x_start_xmit, ++ .ndo_set_rx_mode = ar231x_multicast_list, ++ .ndo_do_ioctl = ar231x_ioctl, ++ .ndo_change_mtu = eth_change_mtu, ++ .ndo_validate_addr = eth_validate_addr, ++ .ndo_set_mac_address = eth_mac_addr, ++ .ndo_tx_timeout = ar231x_tx_timeout, ++#ifdef CONFIG_NET_POLL_CONTROLLER ++ .ndo_poll_controller = ar231x_netpoll, ++#endif ++}; ++ ++static int ar231x_probe(struct platform_device *pdev) ++{ ++ struct net_device *dev; ++ struct ar231x_private *sp; ++ struct resource *res; ++ unsigned long ar_eth_base; ++ char buf[64]; ++ ++ dev = alloc_etherdev(sizeof(struct ar231x_private)); ++ ++ if (dev == NULL) { ++ printk(KERN_ERR ++ "ar231x: Unable to allocate net_device structure!\n"); ++ return -ENOMEM; ++ } ++ ++ platform_set_drvdata(pdev, dev); ++ ++ SET_NETDEV_DEV(dev, &pdev->dev); ++ ++ sp = netdev_priv(dev); ++ sp->dev = dev; ++ sp->pdev = pdev; ++ sp->cfg = pdev->dev.platform_data; ++ ++ sprintf(buf, "eth%d_membase", pdev->id); ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf); ++ if (!res) ++ return -ENODEV; ++ ++ sp->link = 0; ++ ar_eth_base = res->start; ++ ++ sprintf(buf, "eth%d_irq", pdev->id); ++ dev->irq = platform_get_irq_byname(pdev, buf); ++ ++ spin_lock_init(&sp->lock); ++ ++ dev->features |= NETIF_F_HIGHDMA; ++ dev->netdev_ops = &ar231x_ops; ++ ++ tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long)dev); ++ tasklet_disable(&sp->rx_tasklet); ++ ++ sp->eth_regs = ioremap_nocache(ar_eth_base, sizeof(*sp->eth_regs)); ++ if (!sp->eth_regs) { ++ printk("Can't remap eth registers\n"); ++ return -ENXIO; ++ } ++ ++ /** ++ * When there's only one MAC, PHY regs are typically on ENET0, ++ * even though the MAC might be on ENET1. ++ * So remap PHY regs separately. ++ */ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "eth0_mii"); ++ if (!res) { ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, ++ "eth1_mii"); ++ if (!res) ++ return -ENODEV; ++ } ++ sp->phy_regs = ioremap_nocache(res->start, resource_size(res)); ++ if (!sp->phy_regs) { ++ printk("Can't remap phy registers\n"); ++ return -ENXIO; ++ } ++ ++ sp->dma_regs = ioremap_nocache(ar_eth_base + 0x1000, ++ sizeof(*sp->dma_regs)); ++ if (!sp->dma_regs) { ++ printk("Can't remap DMA registers\n"); ++ return -ENXIO; ++ } ++ dev->base_addr = ar_eth_base + 0x1000; ++ ++ strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1); ++ sp->name[sizeof(sp->name) - 1] = '\0'; ++ memcpy(dev->dev_addr, sp->cfg->macaddr, 6); ++ ++ if (ar231x_init(dev)) { ++ /* ar231x_init() calls ar231x_init_cleanup() on error */ ++ kfree(dev); ++ return -ENODEV; ++ } ++ ++ if (register_netdev(dev)) { ++ printk("%s: register_netdev failed\n", __func__); ++ return -1; ++ } ++ ++ printk("%s: %s: %pM, irq %d\n", dev->name, sp->name, dev->dev_addr, ++ dev->irq); ++ ++ sp->mii_bus = mdiobus_alloc(); ++ if (sp->mii_bus == NULL) ++ return -1; ++ ++ sp->mii_bus->priv = dev; ++ sp->mii_bus->read = ar231x_mdiobus_read; ++ sp->mii_bus->write = ar231x_mdiobus_write; ++ sp->mii_bus->reset = ar231x_mdiobus_reset; ++ sp->mii_bus->name = "ar231x_eth_mii"; ++ snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "%d", pdev->id); ++ ++ mdiobus_register(sp->mii_bus); ++ ++ if (ar231x_mdiobus_probe(dev) != 0) { ++ printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name); ++ rx_tasklet_cleanup(dev); ++ ar231x_init_cleanup(dev); ++ unregister_netdev(dev); ++ kfree(dev); ++ return -ENODEV; ++ } ++ ++ return 0; ++} ++ ++static void ar231x_multicast_list(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ unsigned int filter; ++ ++ filter = sp->eth_regs->mac_control; ++ ++ if (dev->flags & IFF_PROMISC) ++ filter |= MAC_CONTROL_PR; ++ else ++ filter &= ~MAC_CONTROL_PR; ++ if ((dev->flags & IFF_ALLMULTI) || (netdev_mc_count(dev) > 0)) ++ filter |= MAC_CONTROL_PM; ++ else ++ filter &= ~MAC_CONTROL_PM; ++ ++ sp->eth_regs->mac_control = filter; ++} ++ ++static void rx_tasklet_cleanup(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ ++ /** ++ * Tasklet may be scheduled. Need to get it removed from the list ++ * since we're about to free the struct. ++ */ ++ ++ sp->unloading = 1; ++ tasklet_enable(&sp->rx_tasklet); ++ tasklet_kill(&sp->rx_tasklet); ++} ++ ++static int ar231x_remove(struct platform_device *pdev) ++{ ++ struct net_device *dev = platform_get_drvdata(pdev); ++ struct ar231x_private *sp = netdev_priv(dev); ++ ++ rx_tasklet_cleanup(dev); ++ ar231x_init_cleanup(dev); ++ unregister_netdev(dev); ++ mdiobus_unregister(sp->mii_bus); ++ mdiobus_free(sp->mii_bus); ++ kfree(dev); ++ return 0; ++} ++ ++/** ++ * Restart the AR2313 ethernet controller. ++ */ ++static int ar231x_restart(struct net_device *dev) ++{ ++ /* disable interrupts */ ++ disable_irq(dev->irq); ++ ++ /* stop mac */ ++ ar231x_halt(dev); ++ ++ /* initialize */ ++ ar231x_init(dev); ++ ++ /* enable interrupts */ ++ enable_irq(dev->irq); ++ ++ return 0; ++} ++ ++static struct platform_driver ar231x_driver = { ++ .driver.name = "ar231x-eth", ++ .probe = ar231x_probe, ++ .remove = ar231x_remove, ++}; ++ ++module_platform_driver(ar231x_driver); ++ ++static void ar231x_free_descriptors(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ ++ if (sp->rx_ring != NULL) { ++ kfree((void *)KSEG0ADDR(sp->rx_ring)); ++ sp->rx_ring = NULL; ++ sp->tx_ring = NULL; ++ } ++} ++ ++static int ar231x_allocate_descriptors(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ int size; ++ int j; ++ ar231x_descr_t *space; ++ ++ if (sp->rx_ring != NULL) { ++ printk("%s: already done.\n", __func__); ++ return 0; ++ } ++ ++ size = sizeof(ar231x_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES); ++ space = kmalloc(size, GFP_KERNEL); ++ if (space == NULL) ++ return 1; ++ ++ /* invalidate caches */ ++ dma_cache_inv((unsigned int)space, size); ++ ++ /* now convert pointer to KSEG1 */ ++ space = (ar231x_descr_t *)KSEG1ADDR(space); ++ ++ memset((void *)space, 0, size); ++ ++ sp->rx_ring = space; ++ space += AR2313_DESCR_ENTRIES; ++ ++ sp->tx_ring = space; ++ space += AR2313_DESCR_ENTRIES; ++ ++ /* Initialize the transmit Descriptors */ ++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { ++ ar231x_descr_t *td = &sp->tx_ring[j]; ++ ++ td->status = 0; ++ td->devcs = DMA_TX1_CHAINED; ++ td->addr = 0; ++ td->descr = virt_to_phys(&sp->tx_ring[DSC_NEXT(j)]); ++ } ++ ++ return 0; ++} ++ ++/** ++ * Generic cleanup handling data allocated during init. Used when the ++ * module is unloaded or if an error occurs during initialization ++ */ ++static void ar231x_init_cleanup(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ struct sk_buff *skb; ++ int j; ++ ++ ar231x_free_descriptors(dev); ++ ++ if (sp->eth_regs) ++ iounmap((void *)sp->eth_regs); ++ if (sp->dma_regs) ++ iounmap((void *)sp->dma_regs); ++ if (sp->phy_regs) ++ iounmap((void *)sp->phy_regs); ++ ++ if (sp->rx_skb) { ++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { ++ skb = sp->rx_skb[j]; ++ if (skb) { ++ sp->rx_skb[j] = NULL; ++ dev_kfree_skb(skb); ++ } ++ } ++ kfree(sp->rx_skb); ++ sp->rx_skb = NULL; ++ } ++ ++ if (sp->tx_skb) { ++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { ++ skb = sp->tx_skb[j]; ++ if (skb) { ++ sp->tx_skb[j] = NULL; ++ dev_kfree_skb(skb); ++ } ++ } ++ kfree(sp->tx_skb); ++ sp->tx_skb = NULL; ++ } ++} ++ ++static int ar231x_reset_reg(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ unsigned int ethsal, ethsah; ++ unsigned int flags; ++ ++ sp->cfg->reset_set(sp->cfg->reset_mac); ++ mdelay(10); ++ sp->cfg->reset_clear(sp->cfg->reset_mac); ++ mdelay(10); ++ sp->cfg->reset_set(sp->cfg->reset_phy); ++ mdelay(10); ++ sp->cfg->reset_clear(sp->cfg->reset_phy); ++ mdelay(10); ++ ++ sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR); ++ mdelay(10); ++ sp->dma_regs->bus_mode = ++ ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE); ++ ++ /* enable interrupts */ ++ sp->dma_regs->intr_ena = DMA_STATUS_AIS | DMA_STATUS_NIS | ++ DMA_STATUS_RI | DMA_STATUS_TI | ++ DMA_STATUS_FBE; ++ sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring); ++ sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring); ++ sp->dma_regs->control = ++ (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF); ++ ++ sp->eth_regs->flow_control = (FLOW_CONTROL_FCE); ++ sp->eth_regs->vlan_tag = (0x8100); ++ ++ /* Enable Ethernet Interface */ ++ flags = (MAC_CONTROL_TE | /* transmit enable */ ++ MAC_CONTROL_PM | /* pass mcast */ ++ MAC_CONTROL_F | /* full duplex */ ++ MAC_CONTROL_HBD); /* heart beat disabled */ ++ ++ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */ ++ flags |= MAC_CONTROL_PR; ++ } ++ sp->eth_regs->mac_control = flags; ++ ++ /* Set all Ethernet station address registers to their initial values */ ++ ethsah = (((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) | ++ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF); ++ ++ ethsal = (((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) | ++ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) | ++ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) | ++ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF); ++ ++ sp->eth_regs->mac_addr[0] = ethsah; ++ sp->eth_regs->mac_addr[1] = ethsal; ++ ++ mdelay(10); ++ ++ return 0; ++} ++ ++static int ar231x_init(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ int ecode = 0; ++ ++ /* Allocate descriptors */ ++ if (ar231x_allocate_descriptors(dev)) { ++ printk("%s: %s: ar231x_allocate_descriptors failed\n", ++ dev->name, __func__); ++ ecode = -EAGAIN; ++ goto init_error; ++ } ++ ++ /* Get the memory for the skb rings */ ++ if (sp->rx_skb == NULL) { ++ sp->rx_skb = ++ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, ++ GFP_KERNEL); ++ if (!(sp->rx_skb)) { ++ printk("%s: %s: rx_skb kmalloc failed\n", ++ dev->name, __func__); ++ ecode = -EAGAIN; ++ goto init_error; ++ } ++ } ++ memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES); ++ ++ if (sp->tx_skb == NULL) { ++ sp->tx_skb = ++ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, ++ GFP_KERNEL); ++ if (!(sp->tx_skb)) { ++ printk("%s: %s: tx_skb kmalloc failed\n", ++ dev->name, __func__); ++ ecode = -EAGAIN; ++ goto init_error; ++ } ++ } ++ memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES); ++ ++ /** ++ * Set tx_csm before we start receiving interrupts, otherwise ++ * the interrupt handler might think it is supposed to process ++ * tx ints before we are up and running, which may cause a null ++ * pointer access in the int handler. ++ */ ++ sp->rx_skbprd = 0; ++ sp->cur_rx = 0; ++ sp->tx_prd = 0; ++ sp->tx_csm = 0; ++ ++ /* Zero the stats before starting the interface */ ++ memset(&dev->stats, 0, sizeof(dev->stats)); ++ ++ /** ++ * We load the ring here as there seem to be no way to tell the ++ * firmware to wipe the ring without re-initializing it. ++ */ ++ ar231x_load_rx_ring(dev, RX_RING_SIZE); ++ ++ /* Init hardware */ ++ ar231x_reset_reg(dev); ++ ++ /* Get the IRQ */ ++ ecode = request_irq(dev->irq, &ar231x_interrupt, 0, ++ dev->name, dev); ++ if (ecode) { ++ printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n", ++ dev->name, __func__, dev->irq); ++ goto init_error; ++ } ++ ++ tasklet_enable(&sp->rx_tasklet); ++ ++ return 0; ++ ++init_error: ++ ar231x_init_cleanup(dev); ++ return ecode; ++} ++ ++/** ++ * Load the rx ring. ++ * ++ * Loading rings is safe without holding the spin lock since this is ++ * done only before the device is enabled, thus no interrupts are ++ * generated and by the interrupt handler/tasklet handler. ++ */ ++static void ar231x_load_rx_ring(struct net_device *dev, int nr_bufs) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ short i, idx; ++ ++ idx = sp->rx_skbprd; ++ ++ for (i = 0; i < nr_bufs; i++) { ++ struct sk_buff *skb; ++ ar231x_descr_t *rd; ++ ++ if (sp->rx_skb[idx]) ++ break; ++ ++ skb = netdev_alloc_skb_ip_align(dev, AR2313_BUFSIZE); ++ if (!skb) { ++ printk("\n\n\n\n %s: No memory in system\n\n\n\n", ++ __func__); ++ break; ++ } ++ ++ /* Make sure IP header starts on a fresh cache line */ ++ skb->dev = dev; ++ sp->rx_skb[idx] = skb; ++ ++ rd = (ar231x_descr_t *)&sp->rx_ring[idx]; ++ ++ /* initialize dma descriptor */ ++ rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) | ++ DMA_RX1_CHAINED); ++ rd->addr = virt_to_phys(skb->data); ++ rd->descr = virt_to_phys(&sp->rx_ring[DSC_NEXT(idx)]); ++ rd->status = DMA_RX_OWN; ++ ++ idx = DSC_NEXT(idx); ++ } ++ ++ if (i) ++ sp->rx_skbprd = idx; ++} ++ ++#define AR2313_MAX_PKTS_PER_CALL 64 ++ ++static int ar231x_rx_int(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ struct sk_buff *skb, *skb_new; ++ ar231x_descr_t *rxdesc; ++ unsigned int status; ++ u32 idx; ++ int pkts = 0; ++ int rval; ++ ++ idx = sp->cur_rx; ++ ++ /* process at most the entire ring and then wait for another int */ ++ while (1) { ++ rxdesc = &sp->rx_ring[idx]; ++ status = rxdesc->status; ++ ++ if (status & DMA_RX_OWN) { ++ /* SiByte owns descriptor or descr not yet filled in */ ++ rval = 0; ++ break; ++ } ++ ++ if (++pkts > AR2313_MAX_PKTS_PER_CALL) { ++ rval = 1; ++ break; ++ } ++ ++ if ((status & DMA_RX_ERROR) && !(status & DMA_RX_LONG)) { ++ dev->stats.rx_errors++; ++ dev->stats.rx_dropped++; ++ ++ /* add statistics counters */ ++ if (status & DMA_RX_ERR_CRC) ++ dev->stats.rx_crc_errors++; ++ if (status & DMA_RX_ERR_COL) ++ dev->stats.rx_over_errors++; ++ if (status & DMA_RX_ERR_LENGTH) ++ dev->stats.rx_length_errors++; ++ if (status & DMA_RX_ERR_RUNT) ++ dev->stats.rx_over_errors++; ++ if (status & DMA_RX_ERR_DESC) ++ dev->stats.rx_over_errors++; ++ ++ } else { ++ /* alloc new buffer. */ ++ skb_new = netdev_alloc_skb_ip_align(dev, ++ AR2313_BUFSIZE); ++ if (skb_new != NULL) { ++ skb = sp->rx_skb[idx]; ++ /* set skb */ ++ skb_put(skb, ((status >> DMA_RX_LEN_SHIFT) & ++ 0x3fff) - CRC_LEN); ++ ++ dev->stats.rx_bytes += skb->len; ++ skb->protocol = eth_type_trans(skb, dev); ++ /* pass the packet to upper layers */ ++ netif_rx(skb); ++ ++ skb_new->dev = dev; ++ /* reset descriptor's curr_addr */ ++ rxdesc->addr = virt_to_phys(skb_new->data); ++ ++ dev->stats.rx_packets++; ++ sp->rx_skb[idx] = skb_new; ++ } else { ++ dev->stats.rx_dropped++; ++ } ++ } ++ ++ rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) | ++ DMA_RX1_CHAINED); ++ rxdesc->status = DMA_RX_OWN; ++ ++ idx = DSC_NEXT(idx); ++ } ++ ++ sp->cur_rx = idx; ++ ++ return rval; ++} ++ ++static void ar231x_tx_int(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ u32 idx; ++ struct sk_buff *skb; ++ ar231x_descr_t *txdesc; ++ unsigned int status = 0; ++ ++ idx = sp->tx_csm; ++ ++ while (idx != sp->tx_prd) { ++ txdesc = &sp->tx_ring[idx]; ++ status = txdesc->status; ++ ++ if (status & DMA_TX_OWN) { ++ /* ar231x dma still owns descr */ ++ break; ++ } ++ /* done with this descriptor */ ++ dma_unmap_single(&sp->pdev->dev, txdesc->addr, ++ txdesc->devcs & DMA_TX1_BSIZE_MASK, ++ DMA_TO_DEVICE); ++ txdesc->status = 0; ++ ++ if (status & DMA_TX_ERROR) { ++ dev->stats.tx_errors++; ++ dev->stats.tx_dropped++; ++ if (status & DMA_TX_ERR_UNDER) ++ dev->stats.tx_fifo_errors++; ++ if (status & DMA_TX_ERR_HB) ++ dev->stats.tx_heartbeat_errors++; ++ if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK)) ++ dev->stats.tx_carrier_errors++; ++ if (status & (DMA_TX_ERR_LATE | DMA_TX_ERR_COL | ++ DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER)) ++ dev->stats.tx_aborted_errors++; ++ } else { ++ /* transmit OK */ ++ dev->stats.tx_packets++; ++ } ++ ++ skb = sp->tx_skb[idx]; ++ sp->tx_skb[idx] = NULL; ++ idx = DSC_NEXT(idx); ++ dev->stats.tx_bytes += skb->len; ++ dev_kfree_skb_irq(skb); ++ } ++ ++ sp->tx_csm = idx; ++} ++ ++static void rx_tasklet_func(unsigned long data) ++{ ++ struct net_device *dev = (struct net_device *)data; ++ struct ar231x_private *sp = netdev_priv(dev); ++ ++ if (sp->unloading) ++ return; ++ ++ if (ar231x_rx_int(dev)) { ++ tasklet_hi_schedule(&sp->rx_tasklet); ++ } else { ++ unsigned long flags; ++ ++ spin_lock_irqsave(&sp->lock, flags); ++ sp->dma_regs->intr_ena |= DMA_STATUS_RI; ++ spin_unlock_irqrestore(&sp->lock, flags); ++ } ++} ++ ++static void rx_schedule(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ ++ sp->dma_regs->intr_ena &= ~DMA_STATUS_RI; ++ ++ tasklet_hi_schedule(&sp->rx_tasklet); ++} ++ ++static irqreturn_t ar231x_interrupt(int irq, void *dev_id) ++{ ++ struct net_device *dev = (struct net_device *)dev_id; ++ struct ar231x_private *sp = netdev_priv(dev); ++ unsigned int status, enabled; ++ ++ /* clear interrupt */ ++ /* Don't clear RI bit if currently disabled */ ++ status = sp->dma_regs->status; ++ enabled = sp->dma_regs->intr_ena; ++ sp->dma_regs->status = status & enabled; ++ ++ if (status & DMA_STATUS_NIS) { ++ /* normal status */ ++ /** ++ * Don't schedule rx processing if interrupt ++ * is already disabled. ++ */ ++ if (status & enabled & DMA_STATUS_RI) { ++ /* receive interrupt */ ++ rx_schedule(dev); ++ } ++ if (status & DMA_STATUS_TI) { ++ /* transmit interrupt */ ++ ar231x_tx_int(dev); ++ } ++ } ++ ++ /* abnormal status */ ++ if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) ++ ar231x_restart(dev); ++ ++ return IRQ_HANDLED; ++} ++ ++static int ar231x_open(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ unsigned int ethsal, ethsah; ++ ++ /* reset the hardware, in case the MAC address changed */ ++ ethsah = (((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) | ++ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF); ++ ++ ethsal = (((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) | ++ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) | ++ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) | ++ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF); ++ ++ sp->eth_regs->mac_addr[0] = ethsah; ++ sp->eth_regs->mac_addr[1] = ethsal; ++ ++ mdelay(10); ++ ++ dev->mtu = 1500; ++ netif_start_queue(dev); ++ ++ sp->eth_regs->mac_control |= MAC_CONTROL_RE; ++ ++ phy_start(sp->phy_dev); ++ ++ return 0; ++} ++ ++static void ar231x_tx_timeout(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ unsigned long flags; ++ ++ spin_lock_irqsave(&sp->lock, flags); ++ ar231x_restart(dev); ++ spin_unlock_irqrestore(&sp->lock, flags); ++} ++ ++static void ar231x_halt(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ int j; ++ ++ tasklet_disable(&sp->rx_tasklet); ++ ++ /* kill the MAC */ ++ sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */ ++ MAC_CONTROL_TE); /* disable Transmits */ ++ /* stop dma */ ++ sp->dma_regs->control = 0; ++ sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR; ++ ++ /* place phy and MAC in reset */ ++ sp->cfg->reset_set(sp->cfg->reset_mac); ++ sp->cfg->reset_set(sp->cfg->reset_phy); ++ ++ /* free buffers on tx ring */ ++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { ++ struct sk_buff *skb; ++ ar231x_descr_t *txdesc; ++ ++ txdesc = &sp->tx_ring[j]; ++ txdesc->descr = 0; ++ ++ skb = sp->tx_skb[j]; ++ if (skb) { ++ dev_kfree_skb(skb); ++ sp->tx_skb[j] = NULL; ++ } ++ } ++} ++ ++/** ++ * close should do nothing. Here's why. It's called when ++ * 'ifconfig bond0 down' is run. If it calls free_irq then ++ * the irq is gone forever ! When bond0 is made 'up' again, ++ * the ar231x_open () does not call request_irq (). Worse, ++ * the call to ar231x_halt() generates a WDOG reset due to ++ * the write to reset register and the box reboots. ++ * Commenting this out is good since it allows the ++ * system to resume when bond0 is made up again. ++ */ ++static int ar231x_close(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++#if 0 ++ /* Disable interrupts */ ++ disable_irq(dev->irq); ++ ++ /** ++ * Without (or before) releasing irq and stopping hardware, this ++ * is an absolute non-sense, by the way. It will be reset instantly ++ * by the first irq. ++ */ ++ netif_stop_queue(dev); ++ ++ /* stop the MAC and DMA engines */ ++ ar231x_halt(dev); ++ ++ /* release the interrupt */ ++ free_irq(dev->irq, dev); ++ ++#endif ++ ++ phy_stop(sp->phy_dev); ++ ++ return 0; ++} ++ ++static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ ar231x_descr_t *td; ++ u32 idx; ++ ++ idx = sp->tx_prd; ++ td = &sp->tx_ring[idx]; ++ ++ if (td->status & DMA_TX_OWN) { ++ /* free skbuf and lie to the caller that we sent it out */ ++ dev->stats.tx_dropped++; ++ dev_kfree_skb(skb); ++ ++ /* restart transmitter in case locked */ ++ sp->dma_regs->xmt_poll = 0; ++ return 0; ++ } ++ ++ /* Setup the transmit descriptor. */ ++ td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) | ++ (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED)); ++ td->addr = dma_map_single(&sp->pdev->dev, skb->data, skb->len, DMA_TO_DEVICE); ++ td->status = DMA_TX_OWN; ++ ++ /* kick transmitter last */ ++ sp->dma_regs->xmt_poll = 0; ++ ++ sp->tx_skb[idx] = skb; ++ idx = DSC_NEXT(idx); ++ sp->tx_prd = idx; ++ ++ return 0; ++} ++ ++static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ ++ switch (cmd) { ++ case SIOCGMIIPHY: ++ case SIOCGMIIREG: ++ case SIOCSMIIREG: ++ return phy_mii_ioctl(sp->phy_dev, ifr, cmd); ++ ++ default: ++ break; ++ } ++ ++ return -EOPNOTSUPP; ++} ++ ++static void ar231x_adjust_link(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ struct phy_device *phydev = sp->phy_dev; ++ u32 mc; ++ ++ if (!phydev->link) { ++ if (sp->link) { ++ pr_info("%s: link down\n", dev->name); ++ sp->link = 0; ++ } ++ return; ++ } ++ sp->link = 1; ++ ++ pr_info("%s: link up (%uMbps/%s duplex)\n", dev->name, ++ phydev->speed, phydev->duplex ? "full" : "half"); ++ ++ mc = sp->eth_regs->mac_control; ++ if (phydev->duplex) ++ mc = (mc | MAC_CONTROL_F) & ~MAC_CONTROL_DRO; ++ else ++ mc = (mc | MAC_CONTROL_DRO) & ~MAC_CONTROL_F; ++ sp->eth_regs->mac_control = mc; ++ sp->duplex = phydev->duplex; ++} ++ ++#define MII_ADDR(phy, reg) \ ++ ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT)) ++ ++static int ++ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum) ++{ ++ struct net_device *const dev = bus->priv; ++ struct ar231x_private *sp = netdev_priv(dev); ++ volatile MII *ethernet = sp->phy_regs; ++ ++ ethernet->mii_addr = MII_ADDR(phy_addr, regnum); ++ while (ethernet->mii_addr & MII_ADDR_BUSY) ++ ; ++ return ethernet->mii_data >> MII_DATA_SHIFT; ++} ++ ++static int ++ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value) ++{ ++ struct net_device *const dev = bus->priv; ++ struct ar231x_private *sp = netdev_priv(dev); ++ volatile MII *ethernet = sp->phy_regs; ++ ++ while (ethernet->mii_addr & MII_ADDR_BUSY) ++ ; ++ ethernet->mii_data = value << MII_DATA_SHIFT; ++ ethernet->mii_addr = MII_ADDR(phy_addr, regnum) | MII_ADDR_WRITE; ++ ++ return 0; ++} ++ ++static int ar231x_mdiobus_reset(struct mii_bus *bus) ++{ ++ struct net_device *const dev = bus->priv; ++ ++ ar231x_reset_reg(dev); ++ ++ return 0; ++} ++ ++static int ar231x_mdiobus_probe(struct net_device *dev) ++{ ++ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; ++ struct ar231x_private *const sp = netdev_priv(dev); ++ struct phy_device *phydev = NULL; ++ ++ /* find the first (lowest address) PHY on the current MAC's MII bus */ ++ phydev = phy_find_first(sp->mii_bus); ++ if (!phydev) { ++ printk(KERN_ERR "ar231x: %s: no PHY found\n", dev->name); ++ return -1; ++ } ++ ++ /* now we are supposed to have a proper phydev, to attach to... */ ++ BUG_ON(phydev->attached_dev); ++ ++ phydev = phy_connect(dev, phydev_name(phydev), &ar231x_adjust_link, ++ PHY_INTERFACE_MODE_MII); ++ if (IS_ERR(phydev)) { ++ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); ++ return PTR_ERR(phydev); ++ } ++ ++ /* mask with MAC supported features */ ++ linkmode_set_bit_array(phy_10_100_features_array, ++ ARRAY_SIZE(phy_10_100_features_array), ++ mask); ++ linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, mask); ++ linkmode_set_bit(ETHTOOL_LINK_MODE_MII_BIT, mask); ++ linkmode_set_bit(ETHTOOL_LINK_MODE_TP_BIT, mask); ++ ++ linkmode_and(phydev->supported, phydev->supported, mask); ++ linkmode_copy(phydev->advertising, phydev->supported); ++ ++ sp->phy_dev = phydev; ++ ++ printk(KERN_INFO "%s: attached PHY driver [%s] (mii_bus:phy_addr=%s)\n", ++ dev->name, phydev->drv->name, phydev_name(phydev)); ++ ++ return 0; ++} ++ +--- /dev/null ++++ b/drivers/net/ethernet/atheros/ar231x/ar231x.h +@@ -0,0 +1,282 @@ ++/* ++ * ar231x.h: Linux driver for the Atheros AR231x Ethernet device. ++ * ++ * Copyright (C) 2004 by Sameer Dekate ++ * Copyright (C) 2006 Imre Kaloz ++ * Copyright (C) 2006-2009 Felix Fietkau ++ * ++ * Thanks to Atheros for providing hardware and documentation ++ * enabling me to write this driver. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#ifndef _AR2313_H_ ++#define _AR2313_H_ ++ ++#include ++#include ++#include ++#include ++ ++/* probe link timer - 5 secs */ ++#define LINK_TIMER (5*HZ) ++ ++#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0) ++#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0) ++#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0) ++ ++#define AR2313_TX_TIMEOUT (HZ/4) ++ ++/* Rings */ ++#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc)) ++#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1)) ++ ++#define AR2313_MBGET 2 ++#define AR2313_MBSET 3 ++#define AR2313_PCI_RECONFIG 4 ++#define AR2313_PCI_DUMP 5 ++#define AR2313_TEST_PANIC 6 ++#define AR2313_TEST_NULLPTR 7 ++#define AR2313_READ_DATA 8 ++#define AR2313_WRITE_DATA 9 ++#define AR2313_GET_VERSION 10 ++#define AR2313_TEST_HANG 11 ++#define AR2313_SYNC 12 ++ ++#define DMA_RX_ERR_CRC BIT(1) ++#define DMA_RX_ERR_DRIB BIT(2) ++#define DMA_RX_ERR_MII BIT(3) ++#define DMA_RX_EV2 BIT(5) ++#define DMA_RX_ERR_COL BIT(6) ++#define DMA_RX_LONG BIT(7) ++#define DMA_RX_LS BIT(8) /* last descriptor */ ++#define DMA_RX_FS BIT(9) /* first descriptor */ ++#define DMA_RX_MF BIT(10) /* multicast frame */ ++#define DMA_RX_ERR_RUNT BIT(11) /* runt frame */ ++#define DMA_RX_ERR_LENGTH BIT(12) /* length error */ ++#define DMA_RX_ERR_DESC BIT(14) /* descriptor error */ ++#define DMA_RX_ERROR BIT(15) /* error summary */ ++#define DMA_RX_LEN_MASK 0x3fff0000 ++#define DMA_RX_LEN_SHIFT 16 ++#define DMA_RX_FILT BIT(30) ++#define DMA_RX_OWN BIT(31) /* desc owned by DMA controller */ ++ ++#define DMA_RX1_BSIZE_MASK 0x000007ff ++#define DMA_RX1_BSIZE_SHIFT 0 ++#define DMA_RX1_CHAINED BIT(24) ++#define DMA_RX1_RER BIT(25) ++ ++#define DMA_TX_ERR_UNDER BIT(1) /* underflow error */ ++#define DMA_TX_ERR_DEFER BIT(2) /* excessive deferral */ ++#define DMA_TX_COL_MASK 0x78 ++#define DMA_TX_COL_SHIFT 3 ++#define DMA_TX_ERR_HB BIT(7) /* hearbeat failure */ ++#define DMA_TX_ERR_COL BIT(8) /* excessive collisions */ ++#define DMA_TX_ERR_LATE BIT(9) /* late collision */ ++#define DMA_TX_ERR_LINK BIT(10) /* no carrier */ ++#define DMA_TX_ERR_LOSS BIT(11) /* loss of carrier */ ++#define DMA_TX_ERR_JABBER BIT(14) /* transmit jabber timeout */ ++#define DMA_TX_ERROR BIT(15) /* frame aborted */ ++#define DMA_TX_OWN BIT(31) /* descr owned by DMA controller */ ++ ++#define DMA_TX1_BSIZE_MASK 0x000007ff ++#define DMA_TX1_BSIZE_SHIFT 0 ++#define DMA_TX1_CHAINED BIT(24) /* chained descriptors */ ++#define DMA_TX1_TER BIT(25) /* transmit end of ring */ ++#define DMA_TX1_FS BIT(29) /* first segment */ ++#define DMA_TX1_LS BIT(30) /* last segment */ ++#define DMA_TX1_IC BIT(31) /* interrupt on completion */ ++ ++#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */ ++ ++#define MAC_CONTROL_RE BIT(2) /* receive enable */ ++#define MAC_CONTROL_TE BIT(3) /* transmit enable */ ++#define MAC_CONTROL_DC BIT(5) /* Deferral check */ ++#define MAC_CONTROL_ASTP BIT(8) /* Auto pad strip */ ++#define MAC_CONTROL_DRTY BIT(10) /* Disable retry */ ++#define MAC_CONTROL_DBF BIT(11) /* Disable bcast frames */ ++#define MAC_CONTROL_LCC BIT(12) /* late collision ctrl */ ++#define MAC_CONTROL_HP BIT(13) /* Hash Perfect filtering */ ++#define MAC_CONTROL_HASH BIT(14) /* Unicast hash filtering */ ++#define MAC_CONTROL_HO BIT(15) /* Hash only filtering */ ++#define MAC_CONTROL_PB BIT(16) /* Pass Bad frames */ ++#define MAC_CONTROL_IF BIT(17) /* Inverse filtering */ ++#define MAC_CONTROL_PR BIT(18) /* promis mode (valid frames only) */ ++#define MAC_CONTROL_PM BIT(19) /* pass multicast */ ++#define MAC_CONTROL_F BIT(20) /* full-duplex */ ++#define MAC_CONTROL_DRO BIT(23) /* Disable Receive Own */ ++#define MAC_CONTROL_HBD BIT(28) /* heart-beat disabled (MUST BE SET) */ ++#define MAC_CONTROL_BLE BIT(30) /* big endian mode */ ++#define MAC_CONTROL_RA BIT(31) /* rcv all (valid and invalid frames) */ ++ ++#define MII_ADDR_BUSY BIT(0) ++#define MII_ADDR_WRITE BIT(1) ++#define MII_ADDR_REG_SHIFT 6 ++#define MII_ADDR_PHY_SHIFT 11 ++#define MII_DATA_SHIFT 0 ++ ++#define FLOW_CONTROL_FCE BIT(1) ++ ++#define DMA_BUS_MODE_SWR BIT(0) /* software reset */ ++#define DMA_BUS_MODE_BLE BIT(7) /* big endian mode */ ++#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */ ++#define DMA_BUS_MODE_DBO BIT(20) /* big-endian descriptors */ ++ ++#define DMA_STATUS_TI BIT(0) /* transmit interrupt */ ++#define DMA_STATUS_TPS BIT(1) /* transmit process stopped */ ++#define DMA_STATUS_TU BIT(2) /* transmit buffer unavailable */ ++#define DMA_STATUS_TJT BIT(3) /* transmit buffer timeout */ ++#define DMA_STATUS_UNF BIT(5) /* transmit underflow */ ++#define DMA_STATUS_RI BIT(6) /* receive interrupt */ ++#define DMA_STATUS_RU BIT(7) /* receive buffer unavailable */ ++#define DMA_STATUS_RPS BIT(8) /* receive process stopped */ ++#define DMA_STATUS_ETI BIT(10) /* early transmit interrupt */ ++#define DMA_STATUS_FBE BIT(13) /* fatal bus interrupt */ ++#define DMA_STATUS_ERI BIT(14) /* early receive interrupt */ ++#define DMA_STATUS_AIS BIT(15) /* abnormal interrupt summary */ ++#define DMA_STATUS_NIS BIT(16) /* normal interrupt summary */ ++#define DMA_STATUS_RS_SHIFT 17 /* receive process state */ ++#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */ ++#define DMA_STATUS_EB_SHIFT 23 /* error bits */ ++ ++#define DMA_CONTROL_SR BIT(1) /* start receive */ ++#define DMA_CONTROL_ST BIT(13) /* start transmit */ ++#define DMA_CONTROL_SF BIT(21) /* store and forward */ ++ ++typedef struct { ++ volatile unsigned int status; /* OWN, Device control and status. */ ++ volatile unsigned int devcs; /* pkt Control bits + Length */ ++ volatile unsigned int addr; /* Current Address. */ ++ volatile unsigned int descr; /* Next descriptor in chain. */ ++} ar231x_descr_t; ++ ++/** ++ * New Combo structure for Both Eth0 AND eth1 ++ * ++ * Don't directly access MII related regs since phy chip could be actually ++ * connected to another ethernet block. ++ */ ++typedef struct { ++ volatile unsigned int mac_control; /* 0x00 */ ++ volatile unsigned int mac_addr[2]; /* 0x04 - 0x08 */ ++ volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */ ++ volatile unsigned int __mii_addr; /* 0x14 */ ++ volatile unsigned int __mii_data; /* 0x18 */ ++ volatile unsigned int flow_control; /* 0x1c */ ++ volatile unsigned int vlan_tag; /* 0x20 */ ++ volatile unsigned int pad[7]; /* 0x24 - 0x3c */ ++ volatile unsigned int ucast_table[8]; /* 0x40-0x5c */ ++} ETHERNET_STRUCT; ++ ++typedef struct { ++ volatile unsigned int mii_addr; ++ volatile unsigned int mii_data; ++} MII; ++ ++/******************************************************************** ++ * Interrupt controller ++ ********************************************************************/ ++ ++typedef struct { ++ volatile unsigned int wdog_control; /* 0x08 */ ++ volatile unsigned int wdog_timer; /* 0x0c */ ++ volatile unsigned int misc_status; /* 0x10 */ ++ volatile unsigned int misc_mask; /* 0x14 */ ++ volatile unsigned int global_status; /* 0x18 */ ++ volatile unsigned int reserved; /* 0x1c */ ++ volatile unsigned int reset_control; /* 0x20 */ ++} INTERRUPT; ++ ++/******************************************************************** ++ * DMA controller ++ ********************************************************************/ ++typedef struct { ++ volatile unsigned int bus_mode; /* 0x00 (CSR0) */ ++ volatile unsigned int xmt_poll; /* 0x04 (CSR1) */ ++ volatile unsigned int rcv_poll; /* 0x08 (CSR2) */ ++ volatile unsigned int rcv_base; /* 0x0c (CSR3) */ ++ volatile unsigned int xmt_base; /* 0x10 (CSR4) */ ++ volatile unsigned int status; /* 0x14 (CSR5) */ ++ volatile unsigned int control; /* 0x18 (CSR6) */ ++ volatile unsigned int intr_ena; /* 0x1c (CSR7) */ ++ volatile unsigned int rcv_missed; /* 0x20 (CSR8) */ ++ volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */ ++ volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */ ++ volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */ ++} DMA; ++ ++/** ++ * Struct private for the Sibyte. ++ * ++ * Elements are grouped so variables used by the tx handling goes ++ * together, and will go into the same cache lines etc. in order to ++ * avoid cache line contention between the rx and tx handling on SMP. ++ * ++ * Frequently accessed variables are put at the beginning of the ++ * struct to help the compiler generate better/shorter code. ++ */ ++struct ar231x_private { ++ struct net_device *dev; ++ struct platform_device *pdev; ++ int version; ++ u32 mb[2]; ++ ++ volatile MII *phy_regs; ++ volatile ETHERNET_STRUCT *eth_regs; ++ volatile DMA *dma_regs; ++ struct ar231x_eth *cfg; ++ ++ spinlock_t lock; /* Serialise access to device */ ++ ++ /* RX and TX descriptors, must be adjacent */ ++ ar231x_descr_t *rx_ring; ++ ar231x_descr_t *tx_ring; ++ ++ struct sk_buff **rx_skb; ++ struct sk_buff **tx_skb; ++ ++ /* RX elements */ ++ u32 rx_skbprd; ++ u32 cur_rx; ++ ++ /* TX elements */ ++ u32 tx_prd; ++ u32 tx_csm; ++ ++ /* Misc elements */ ++ char name[48]; ++ struct { ++ u32 address; ++ u32 length; ++ char *mapping; ++ } desc; ++ ++ unsigned short link; /* 0 - link down, 1 - link up */ ++ unsigned short duplex; /* 0 - half, 1 - full */ ++ ++ struct tasklet_struct rx_tasklet; ++ int unloading; ++ ++ struct phy_device *phy_dev; ++ struct mii_bus *mii_bus; ++}; ++ ++/* Prototypes */ ++static int ar231x_init(struct net_device *dev); ++#ifdef TX_TIMEOUT ++static void ar231x_tx_timeout(struct net_device *dev); ++#endif ++static int ar231x_restart(struct net_device *dev); ++static void ar231x_load_rx_ring(struct net_device *dev, int bufs); ++static irqreturn_t ar231x_interrupt(int irq, void *dev_id); ++static int ar231x_open(struct net_device *dev); ++static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev); ++static int ar231x_close(struct net_device *dev); ++static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); ++static void ar231x_init_cleanup(struct net_device *dev); ++ ++#endif /* _AR2313_H_ */ +--- a/arch/mips/ath25/ar2315_regs.h ++++ b/arch/mips/ath25/ar2315_regs.h +@@ -57,6 +57,9 @@ + #define AR2315_PCI_EXT_BASE 0x80000000 /* PCI external */ + #define AR2315_PCI_EXT_SIZE 0x40000000 + ++/* MII registers offset inside Ethernet MMR region */ ++#define AR2315_ENET0_MII_BASE (AR2315_ENET0_BASE + 0x14) ++ + /* + * Configuration registers + */ +--- a/arch/mips/ath25/ar5312_regs.h ++++ b/arch/mips/ath25/ar5312_regs.h +@@ -64,6 +64,10 @@ + #define AR5312_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ + #define AR5312_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */ + ++/* MII registers offset inside Ethernet MMR region */ ++#define AR5312_ENET0_MII_BASE (AR5312_ENET0_BASE + 0x14) ++#define AR5312_ENET1_MII_BASE (AR5312_ENET1_BASE + 0x14) ++ + /* Reset/Timer Block Address Map */ + #define AR5312_TIMER 0x0000 /* countdown timer */ + #define AR5312_RELOAD 0x0004 /* timer reload value */ +--- a/arch/mips/ath25/ar2315.c ++++ b/arch/mips/ath25/ar2315.c +@@ -136,6 +136,8 @@ static void ar2315_irq_dispatch(void) + + if (pending & CAUSEF_IP3) + do_IRQ(AR2315_IRQ_WLAN0); ++ else if (pending & CAUSEF_IP4) ++ do_IRQ(AR2315_IRQ_ENET0); + #ifdef CONFIG_PCI_AR2315 + else if (pending & CAUSEF_IP5) + do_IRQ(AR2315_IRQ_LCBUS_PCI); +@@ -169,6 +171,29 @@ void __init ar2315_arch_init_irq(void) + ar2315_misc_irq_domain = domain; + } + ++static void ar2315_device_reset_set(u32 mask) ++{ ++ u32 val; ++ ++ val = ar2315_rst_reg_read(AR2315_RESET); ++ ar2315_rst_reg_write(AR2315_RESET, val | mask); ++} ++ ++static void ar2315_device_reset_clear(u32 mask) ++{ ++ u32 val; ++ ++ val = ar2315_rst_reg_read(AR2315_RESET); ++ ar2315_rst_reg_write(AR2315_RESET, val & ~mask); ++} ++ ++static struct ar231x_eth ar2315_eth_data = { ++ .reset_set = ar2315_device_reset_set, ++ .reset_clear = ar2315_device_reset_clear, ++ .reset_mac = AR2315_RESET_ENET0, ++ .reset_phy = AR2315_RESET_EPHY0, ++}; ++ + static struct resource ar2315_gpio_res[] = { + { + .name = "ar2315-gpio", +@@ -205,6 +230,11 @@ void __init ar2315_init_devices(void) + ar2315_gpio_res[1].end = ar2315_gpio_res[1].start; + platform_device_register(&ar2315_gpio); + ++ ar2315_eth_data.macaddr = ath25_board.config->enet0_mac; ++ ath25_add_ethernet(0, AR2315_ENET0_BASE, "eth0_mii", ++ AR2315_ENET0_MII_BASE, AR2315_IRQ_ENET0, ++ &ar2315_eth_data); ++ + ath25_add_wmac(0, AR2315_WLAN0_BASE, AR2315_IRQ_WLAN0); + } + +--- a/arch/mips/ath25/ar5312.c ++++ b/arch/mips/ath25/ar5312.c +@@ -132,6 +132,10 @@ static void ar5312_irq_dispatch(void) + + if (pending & CAUSEF_IP2) + do_IRQ(AR5312_IRQ_WLAN0); ++ else if (pending & CAUSEF_IP3) ++ do_IRQ(AR5312_IRQ_ENET0); ++ else if (pending & CAUSEF_IP4) ++ do_IRQ(AR5312_IRQ_ENET1); + else if (pending & CAUSEF_IP5) + do_IRQ(AR5312_IRQ_WLAN1); + else if (pending & CAUSEF_IP6) +@@ -163,6 +167,36 @@ void __init ar5312_arch_init_irq(void) + ar5312_misc_irq_domain = domain; + } + ++static void ar5312_device_reset_set(u32 mask) ++{ ++ u32 val; ++ ++ val = ar5312_rst_reg_read(AR5312_RESET); ++ ar5312_rst_reg_write(AR5312_RESET, val | mask); ++} ++ ++static void ar5312_device_reset_clear(u32 mask) ++{ ++ u32 val; ++ ++ val = ar5312_rst_reg_read(AR5312_RESET); ++ ar5312_rst_reg_write(AR5312_RESET, val & ~mask); ++} ++ ++static struct ar231x_eth ar5312_eth0_data = { ++ .reset_set = ar5312_device_reset_set, ++ .reset_clear = ar5312_device_reset_clear, ++ .reset_mac = AR5312_RESET_ENET0, ++ .reset_phy = AR5312_RESET_EPHY0, ++}; ++ ++static struct ar231x_eth ar5312_eth1_data = { ++ .reset_set = ar5312_device_reset_set, ++ .reset_clear = ar5312_device_reset_clear, ++ .reset_mac = AR5312_RESET_ENET1, ++ .reset_phy = AR5312_RESET_EPHY1, ++}; ++ + static struct physmap_flash_data ar5312_flash_data = { + .width = 2, + }; +@@ -243,6 +277,7 @@ static void __init ar5312_flash_init(voi + void __init ar5312_init_devices(void) + { + struct ath25_boarddata *config; ++ u8 *c; + + ar5312_flash_init(); + +@@ -266,8 +301,30 @@ void __init ar5312_init_devices(void) + + platform_device_register(&ar5312_gpio); + ++ /* Fix up MAC addresses if necessary */ ++ if (is_broadcast_ether_addr(config->enet0_mac)) ++ ether_addr_copy(config->enet0_mac, config->enet1_mac); ++ ++ /* If ENET0 and ENET1 have the same mac address, ++ * increment the one from ENET1 */ ++ if (ether_addr_equal(config->enet0_mac, config->enet1_mac)) { ++ c = config->enet1_mac + 5; ++ while ((c >= config->enet1_mac) && !(++(*c))) ++ c--; ++ } ++ + switch (ath25_soc) { + case ATH25_SOC_AR5312: ++ ar5312_eth0_data.macaddr = config->enet0_mac; ++ ath25_add_ethernet(0, AR5312_ENET0_BASE, "eth0_mii", ++ AR5312_ENET0_MII_BASE, AR5312_IRQ_ENET0, ++ &ar5312_eth0_data); ++ ++ ar5312_eth1_data.macaddr = config->enet1_mac; ++ ath25_add_ethernet(1, AR5312_ENET1_BASE, "eth1_mii", ++ AR5312_ENET1_MII_BASE, AR5312_IRQ_ENET1, ++ &ar5312_eth1_data); ++ + if (!ath25_board.radio) + return; + +@@ -276,8 +333,18 @@ void __init ar5312_init_devices(void) + + ath25_add_wmac(0, AR5312_WLAN0_BASE, AR5312_IRQ_WLAN0); + break; ++ /* ++ * AR2312/3 ethernet uses the PHY of ENET0, but the MAC ++ * of ENET1. Atheros calls it 'twisted' for a reason :) ++ */ + case ATH25_SOC_AR2312: + case ATH25_SOC_AR2313: ++ ar5312_eth1_data.reset_phy = ar5312_eth0_data.reset_phy; ++ ar5312_eth1_data.macaddr = config->enet0_mac; ++ ath25_add_ethernet(1, AR5312_ENET1_BASE, "eth0_mii", ++ AR5312_ENET0_MII_BASE, AR5312_IRQ_ENET1, ++ &ar5312_eth1_data); ++ + if (!ath25_board.radio) + return; + break; +--- a/arch/mips/ath25/devices.h ++++ b/arch/mips/ath25/devices.h +@@ -33,6 +33,8 @@ extern struct ar231x_board_config ath25_ + extern void (*ath25_irq_dispatch)(void); + + int ath25_find_config(phys_addr_t offset, unsigned long size); ++int ath25_add_ethernet(int nr, u32 base, const char *mii_name, u32 mii_base, ++ int irq, void *pdata); + void ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk); + int ath25_add_wmac(int nr, u32 base, int irq); + +--- a/arch/mips/ath25/devices.c ++++ b/arch/mips/ath25/devices.c +@@ -13,6 +13,51 @@ + struct ar231x_board_config ath25_board; + enum ath25_soc_type ath25_soc = ATH25_SOC_UNKNOWN; + ++static struct resource ath25_eth0_res[] = { ++ { ++ .name = "eth0_membase", ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = "eth0_mii", ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = "eth0_irq", ++ .flags = IORESOURCE_IRQ, ++ } ++}; ++ ++static struct resource ath25_eth1_res[] = { ++ { ++ .name = "eth1_membase", ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = "eth1_mii", ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = "eth1_irq", ++ .flags = IORESOURCE_IRQ, ++ } ++}; ++ ++static struct platform_device ath25_eth[] = { ++ { ++ .id = 0, ++ .name = "ar231x-eth", ++ .resource = ath25_eth0_res, ++ .num_resources = ARRAY_SIZE(ath25_eth0_res) ++ }, ++ { ++ .id = 1, ++ .name = "ar231x-eth", ++ .resource = ath25_eth1_res, ++ .num_resources = ARRAY_SIZE(ath25_eth1_res) ++ } ++}; ++ + static struct resource ath25_wmac0_res[] = { + { + .name = "wmac0_membase", +@@ -71,6 +116,25 @@ const char *get_system_type(void) + return soc_type_strings[ath25_soc]; + } + ++int __init ath25_add_ethernet(int nr, u32 base, const char *mii_name, ++ u32 mii_base, int irq, void *pdata) ++{ ++ struct resource *res; ++ ++ ath25_eth[nr].dev.platform_data = pdata; ++ res = &ath25_eth[nr].resource[0]; ++ res->start = base; ++ res->end = base + 0x2000 - 1; ++ res++; ++ res->name = mii_name; ++ res->start = mii_base; ++ res->end = mii_base + 8 - 1; ++ res++; ++ res->start = irq; ++ res->end = irq; ++ return platform_device_register(&ath25_eth[nr]); ++} ++ + void __init ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk) + { + #ifdef CONFIG_SERIAL_8250_CONSOLE +--- a/arch/mips/include/asm/mach-ath25/ath25_platform.h ++++ b/arch/mips/include/asm/mach-ath25/ath25_platform.h +@@ -71,4 +71,15 @@ struct ar231x_board_config { + const char *radio; + }; + ++/* ++ * Platform device information for the Ethernet MAC ++ */ ++struct ar231x_eth { ++ void (*reset_set)(u32); ++ void (*reset_clear)(u32); ++ u32 reset_mac; ++ u32 reset_phy; ++ char *macaddr; ++}; ++ + #endif /* __ASM_MACH_ATH25_PLATFORM_H */ diff --git a/target/linux/ath25/patches-5.4/120-spiflash.patch b/target/linux/ath25/patches-5.4/120-spiflash.patch new file mode 100644 index 0000000000..52460f89dd --- /dev/null +++ b/target/linux/ath25/patches-5.4/120-spiflash.patch @@ -0,0 +1,631 @@ +--- a/drivers/mtd/devices/Kconfig ++++ b/drivers/mtd/devices/Kconfig +@@ -114,6 +114,10 @@ config MTD_BCM47XXSFLASH + registered by bcma as platform devices. This enables driver for + serial flash memories. + ++config MTD_AR2315 ++ tristate "Atheros AR2315+ SPI Flash support" ++ depends on SOC_AR2315 ++ + config MTD_SLRAM + tristate "Uncached system RAM" + help +--- a/drivers/mtd/devices/Makefile ++++ b/drivers/mtd/devices/Makefile +@@ -15,6 +15,7 @@ obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataf + obj-$(CONFIG_MTD_MCHP23K256) += mchp23k256.o + obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o + obj-$(CONFIG_MTD_SST25L) += sst25l.o ++obj-$(CONFIG_MTD_AR2315) += ar2315.o + obj-$(CONFIG_MTD_BCM47XXSFLASH) += bcm47xxsflash.o + obj-$(CONFIG_MTD_ST_SPI_FSM) += st_spi_fsm.o + obj-$(CONFIG_MTD_POWERNV_FLASH) += powernv_flash.o +--- /dev/null ++++ b/drivers/mtd/devices/ar2315.c +@@ -0,0 +1,456 @@ ++ ++/* ++ * MTD driver for the SPI Flash Memory support on Atheros AR2315 ++ * ++ * Copyright (c) 2005-2006 Atheros Communications Inc. ++ * Copyright (C) 2006-2007 FON Technology, SL. ++ * Copyright (C) 2006-2007 Imre Kaloz ++ * Copyright (C) 2006-2009 Felix Fietkau ++ * Copyright (C) 2012 Alexandros C. Couloumbis ++ * ++ * This code is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "ar2315_spiflash.h" ++ ++#define DRIVER_NAME "ar2315-spiflash" ++ ++#define busy_wait(_priv, _condition, _wait) do { \ ++ while (_condition) { \ ++ if (_wait > 1) \ ++ msleep(_wait); \ ++ else if ((_wait == 1) && need_resched()) \ ++ schedule(); \ ++ else \ ++ udelay(1); \ ++ } \ ++} while (0) ++ ++enum { ++ FLASH_NONE, ++ FLASH_1MB, ++ FLASH_2MB, ++ FLASH_4MB, ++ FLASH_8MB, ++ FLASH_16MB, ++}; ++ ++/* Flash configuration table */ ++struct flashconfig { ++ u32 byte_cnt; ++ u32 sector_cnt; ++ u32 sector_size; ++}; ++ ++static const struct flashconfig flashconfig_tbl[] = { ++ [FLASH_NONE] = { 0, 0, 0}, ++ [FLASH_1MB] = { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, ++ STM_1MB_SECTOR_SIZE}, ++ [FLASH_2MB] = { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, ++ STM_2MB_SECTOR_SIZE}, ++ [FLASH_4MB] = { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, ++ STM_4MB_SECTOR_SIZE}, ++ [FLASH_8MB] = { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, ++ STM_8MB_SECTOR_SIZE}, ++ [FLASH_16MB] = { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT, ++ STM_16MB_SECTOR_SIZE} ++}; ++ ++/* Mapping of generic opcodes to STM serial flash opcodes */ ++enum { ++ SPI_WRITE_ENABLE, ++ SPI_WRITE_DISABLE, ++ SPI_RD_STATUS, ++ SPI_WR_STATUS, ++ SPI_RD_DATA, ++ SPI_FAST_RD_DATA, ++ SPI_PAGE_PROGRAM, ++ SPI_SECTOR_ERASE, ++ SPI_BULK_ERASE, ++ SPI_DEEP_PWRDOWN, ++ SPI_RD_SIG, ++}; ++ ++struct opcodes { ++ __u16 code; ++ __s8 tx_cnt; ++ __s8 rx_cnt; ++}; ++ ++static const struct opcodes stm_opcodes[] = { ++ [SPI_WRITE_ENABLE] = {STM_OP_WR_ENABLE, 1, 0}, ++ [SPI_WRITE_DISABLE] = {STM_OP_WR_DISABLE, 1, 0}, ++ [SPI_RD_STATUS] = {STM_OP_RD_STATUS, 1, 1}, ++ [SPI_WR_STATUS] = {STM_OP_WR_STATUS, 1, 0}, ++ [SPI_RD_DATA] = {STM_OP_RD_DATA, 4, 4}, ++ [SPI_FAST_RD_DATA] = {STM_OP_FAST_RD_DATA, 5, 0}, ++ [SPI_PAGE_PROGRAM] = {STM_OP_PAGE_PGRM, 8, 0}, ++ [SPI_SECTOR_ERASE] = {STM_OP_SECTOR_ERASE, 4, 0}, ++ [SPI_BULK_ERASE] = {STM_OP_BULK_ERASE, 1, 0}, ++ [SPI_DEEP_PWRDOWN] = {STM_OP_DEEP_PWRDOWN, 1, 0}, ++ [SPI_RD_SIG] = {STM_OP_RD_SIG, 4, 1}, ++}; ++ ++/* Driver private data structure */ ++struct spiflash_priv { ++ struct mtd_info mtd; ++ void __iomem *readaddr; /* memory mapped data for read */ ++ void __iomem *mmraddr; /* memory mapped register space */ ++ struct mutex lock; /* serialize registers access */ ++}; ++ ++#define to_spiflash(_mtd) container_of(_mtd, struct spiflash_priv, mtd) ++ ++enum { ++ FL_READY, ++ FL_READING, ++ FL_ERASING, ++ FL_WRITING ++}; ++ ++/*****************************************************************************/ ++ ++static u32 ++spiflash_read_reg(struct spiflash_priv *priv, int reg) ++{ ++ return ioread32(priv->mmraddr + reg); ++} ++ ++static void ++spiflash_write_reg(struct spiflash_priv *priv, int reg, u32 data) ++{ ++ iowrite32(data, priv->mmraddr + reg); ++} ++ ++static u32 ++spiflash_wait_busy(struct spiflash_priv *priv) ++{ ++ u32 reg; ++ ++ busy_wait(priv, (reg = spiflash_read_reg(priv, SPI_FLASH_CTL)) & ++ SPI_CTL_BUSY, 0); ++ return reg; ++} ++ ++static u32 ++spiflash_sendcmd(struct spiflash_priv *priv, int opcode, u32 addr) ++{ ++ const struct opcodes *op; ++ u32 reg, mask; ++ ++ op = &stm_opcodes[opcode]; ++ reg = spiflash_wait_busy(priv); ++ spiflash_write_reg(priv, SPI_FLASH_OPCODE, ++ ((u32)op->code) | (addr << 8)); ++ ++ reg &= ~SPI_CTL_TX_RX_CNT_MASK; ++ reg |= SPI_CTL_START | op->tx_cnt | (op->rx_cnt << 4); ++ ++ spiflash_write_reg(priv, SPI_FLASH_CTL, reg); ++ spiflash_wait_busy(priv); ++ ++ if (!op->rx_cnt) ++ return 0; ++ ++ reg = spiflash_read_reg(priv, SPI_FLASH_DATA); ++ ++ switch (op->rx_cnt) { ++ case 1: ++ mask = 0x000000ff; ++ break; ++ case 2: ++ mask = 0x0000ffff; ++ break; ++ case 3: ++ mask = 0x00ffffff; ++ break; ++ default: ++ mask = 0xffffffff; ++ break; ++ } ++ reg &= mask; ++ ++ return reg; ++} ++ ++/* ++ * Probe SPI flash device ++ * Function returns 0 for failure. ++ * and flashconfig_tbl array index for success. ++ */ ++static int ++spiflash_probe_chip(struct platform_device *pdev, struct spiflash_priv *priv) ++{ ++ u32 sig = spiflash_sendcmd(priv, SPI_RD_SIG, 0); ++ int flash_size; ++ ++ switch (sig) { ++ case STM_8MBIT_SIGNATURE: ++ flash_size = FLASH_1MB; ++ break; ++ case STM_16MBIT_SIGNATURE: ++ flash_size = FLASH_2MB; ++ break; ++ case STM_32MBIT_SIGNATURE: ++ flash_size = FLASH_4MB; ++ break; ++ case STM_64MBIT_SIGNATURE: ++ flash_size = FLASH_8MB; ++ break; ++ case STM_128MBIT_SIGNATURE: ++ flash_size = FLASH_16MB; ++ break; ++ default: ++ dev_warn(&pdev->dev, "read of flash device signature failed!\n"); ++ return 0; ++ } ++ ++ return flash_size; ++} ++ ++static void ++spiflash_wait_complete(struct spiflash_priv *priv, unsigned int timeout) ++{ ++ busy_wait(priv, spiflash_sendcmd(priv, SPI_RD_STATUS, 0) & ++ SPI_STATUS_WIP, timeout); ++} ++ ++static int ++spiflash_erase(struct mtd_info *mtd, struct erase_info *instr) ++{ ++ struct spiflash_priv *priv = to_spiflash(mtd); ++ const struct opcodes *op; ++ u32 temp, reg; ++ ++ if (instr->addr + instr->len > mtd->size) ++ return -EINVAL; ++ ++ mutex_lock(&priv->lock); ++ ++ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0); ++ reg = spiflash_wait_busy(priv); ++ ++ op = &stm_opcodes[SPI_SECTOR_ERASE]; ++ temp = ((u32)instr->addr << 8) | (u32)(op->code); ++ spiflash_write_reg(priv, SPI_FLASH_OPCODE, temp); ++ ++ reg &= ~SPI_CTL_TX_RX_CNT_MASK; ++ reg |= op->tx_cnt | SPI_CTL_START; ++ spiflash_write_reg(priv, SPI_FLASH_CTL, reg); ++ ++ spiflash_wait_complete(priv, 20); ++ ++ mutex_unlock(&priv->lock); ++ ++ return 0; ++} ++ ++static int ++spiflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, ++ u_char *buf) ++{ ++ struct spiflash_priv *priv = to_spiflash(mtd); ++ ++ if (!len) ++ return 0; ++ ++ if (from + len > mtd->size) ++ return -EINVAL; ++ ++ *retlen = len; ++ ++ mutex_lock(&priv->lock); ++ ++ memcpy_fromio(buf, priv->readaddr + from, len); ++ ++ mutex_unlock(&priv->lock); ++ ++ return 0; ++} ++ ++static int ++spiflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, ++ const u8 *buf) ++{ ++ struct spiflash_priv *priv = to_spiflash(mtd); ++ u32 opcode, bytes_left; ++ ++ *retlen = 0; ++ ++ if (!len) ++ return 0; ++ ++ if (to + len > mtd->size) ++ return -EINVAL; ++ ++ bytes_left = len; ++ ++ do { ++ u32 read_len, reg, page_offset, spi_data = 0; ++ ++ read_len = min(bytes_left, sizeof(u32)); ++ ++ /* 32-bit writes cannot span across a page boundary ++ * (256 bytes). This types of writes require two page ++ * program operations to handle it correctly. The STM part ++ * will write the overflow data to the beginning of the ++ * current page as opposed to the subsequent page. ++ */ ++ page_offset = (to & (STM_PAGE_SIZE - 1)) + read_len; ++ ++ if (page_offset > STM_PAGE_SIZE) ++ read_len -= (page_offset - STM_PAGE_SIZE); ++ ++ mutex_lock(&priv->lock); ++ ++ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0); ++ spi_data = 0; ++ switch (read_len) { ++ case 4: ++ spi_data |= buf[3] << 24; ++ /* fall through */ ++ case 3: ++ spi_data |= buf[2] << 16; ++ /* fall through */ ++ case 2: ++ spi_data |= buf[1] << 8; ++ /* fall through */ ++ case 1: ++ spi_data |= buf[0] & 0xff; ++ break; ++ default: ++ break; ++ } ++ ++ spiflash_write_reg(priv, SPI_FLASH_DATA, spi_data); ++ opcode = stm_opcodes[SPI_PAGE_PROGRAM].code | ++ (to & 0x00ffffff) << 8; ++ spiflash_write_reg(priv, SPI_FLASH_OPCODE, opcode); ++ ++ reg = spiflash_read_reg(priv, SPI_FLASH_CTL); ++ reg &= ~SPI_CTL_TX_RX_CNT_MASK; ++ reg |= (read_len + 4) | SPI_CTL_START; ++ spiflash_write_reg(priv, SPI_FLASH_CTL, reg); ++ ++ spiflash_wait_complete(priv, 1); ++ ++ mutex_unlock(&priv->lock); ++ ++ bytes_left -= read_len; ++ to += read_len; ++ buf += read_len; ++ ++ *retlen += read_len; ++ } while (bytes_left != 0); ++ ++ return 0; ++} ++ ++#if defined CONFIG_MTD_REDBOOT_PARTS || CONFIG_MTD_MYLOADER_PARTS ++static const char * const part_probe_types[] = { ++ "cmdlinepart", "RedBoot", "MyLoader", NULL ++}; ++#endif ++ ++static int ++spiflash_probe(struct platform_device *pdev) ++{ ++ struct spiflash_priv *priv; ++ struct mtd_info *mtd; ++ struct resource *res; ++ int index; ++ int result = 0; ++ ++ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; ++ ++ mutex_init(&priv->lock); ++ mtd = &priv->mtd; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 1); ++ priv->mmraddr = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(priv->mmraddr)) { ++ dev_warn(&pdev->dev, "failed to map flash MMR\n"); ++ return PTR_ERR(priv->mmraddr); ++ } ++ ++ index = spiflash_probe_chip(pdev, priv); ++ if (!index) { ++ dev_warn(&pdev->dev, "found no flash device\n"); ++ return -ENODEV; ++ } ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ priv->readaddr = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(priv->readaddr)) { ++ dev_warn(&pdev->dev, "failed to map flash read mem\n"); ++ return PTR_ERR(priv->readaddr); ++ } ++ ++ platform_set_drvdata(pdev, priv); ++ mtd->name = "spiflash"; ++ mtd->type = MTD_NORFLASH; ++ mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE); ++ mtd->size = flashconfig_tbl[index].byte_cnt; ++ mtd->erasesize = flashconfig_tbl[index].sector_size; ++ mtd->writesize = 1; ++ mtd->numeraseregions = 0; ++ mtd->eraseregions = NULL; ++ mtd->_erase = spiflash_erase; ++ mtd->_read = spiflash_read; ++ mtd->_write = spiflash_write; ++ mtd->owner = THIS_MODULE; ++ ++ dev_info(&pdev->dev, "%lld Kbytes flash detected\n", mtd->size >> 10); ++ ++#if defined CONFIG_MTD_REDBOOT_PARTS || CONFIG_MTD_MYLOADER_PARTS ++ /* parse redboot partitions */ ++ ++ result = mtd_device_parse_register(mtd, part_probe_types, ++ NULL, NULL, 0); ++#endif ++ ++ return result; ++} ++ ++static int ++spiflash_remove(struct platform_device *pdev) ++{ ++ struct spiflash_priv *priv = platform_get_drvdata(pdev); ++ ++ mtd_device_unregister(&priv->mtd); ++ ++ return 0; ++} ++ ++static struct platform_driver spiflash_driver = { ++ .driver.name = DRIVER_NAME, ++ .probe = spiflash_probe, ++ .remove = spiflash_remove, ++}; ++ ++module_platform_driver(spiflash_driver); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("OpenWrt.org"); ++MODULE_AUTHOR("Atheros Communications Inc"); ++MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros AR2315+ SOC"); ++MODULE_ALIAS("platform:" DRIVER_NAME); ++ +--- /dev/null ++++ b/drivers/mtd/devices/ar2315_spiflash.h +@@ -0,0 +1,106 @@ ++/* ++ * Atheros AR2315 SPI Flash Memory support header file. ++ * ++ * Copyright (c) 2005, Atheros Communications Inc. ++ * Copyright (C) 2006 FON Technology, SL. ++ * Copyright (C) 2006 Imre Kaloz ++ * Copyright (C) 2006-2009 Felix Fietkau ++ * ++ * This code is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++#ifndef __AR2315_SPIFLASH_H ++#define __AR2315_SPIFLASH_H ++ ++#define STM_PAGE_SIZE 256 ++ ++#define SFI_WRITE_BUFFER_SIZE 4 ++#define SFI_FLASH_ADDR_MASK 0x00ffffff ++ ++#define STM_8MBIT_SIGNATURE 0x13 ++#define STM_M25P80_BYTE_COUNT 1048576 ++#define STM_M25P80_SECTOR_COUNT 16 ++#define STM_M25P80_SECTOR_SIZE 0x10000 ++ ++#define STM_16MBIT_SIGNATURE 0x14 ++#define STM_M25P16_BYTE_COUNT 2097152 ++#define STM_M25P16_SECTOR_COUNT 32 ++#define STM_M25P16_SECTOR_SIZE 0x10000 ++ ++#define STM_32MBIT_SIGNATURE 0x15 ++#define STM_M25P32_BYTE_COUNT 4194304 ++#define STM_M25P32_SECTOR_COUNT 64 ++#define STM_M25P32_SECTOR_SIZE 0x10000 ++ ++#define STM_64MBIT_SIGNATURE 0x16 ++#define STM_M25P64_BYTE_COUNT 8388608 ++#define STM_M25P64_SECTOR_COUNT 128 ++#define STM_M25P64_SECTOR_SIZE 0x10000 ++ ++#define STM_128MBIT_SIGNATURE 0x17 ++#define STM_M25P128_BYTE_COUNT 16777216 ++#define STM_M25P128_SECTOR_COUNT 256 ++#define STM_M25P128_SECTOR_SIZE 0x10000 ++ ++#define STM_1MB_BYTE_COUNT STM_M25P80_BYTE_COUNT ++#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT ++#define STM_1MB_SECTOR_SIZE STM_M25P80_SECTOR_SIZE ++#define STM_2MB_BYTE_COUNT STM_M25P16_BYTE_COUNT ++#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT ++#define STM_2MB_SECTOR_SIZE STM_M25P16_SECTOR_SIZE ++#define STM_4MB_BYTE_COUNT STM_M25P32_BYTE_COUNT ++#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT ++#define STM_4MB_SECTOR_SIZE STM_M25P32_SECTOR_SIZE ++#define STM_8MB_BYTE_COUNT STM_M25P64_BYTE_COUNT ++#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT ++#define STM_8MB_SECTOR_SIZE STM_M25P64_SECTOR_SIZE ++#define STM_16MB_BYTE_COUNT STM_M25P128_BYTE_COUNT ++#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT ++#define STM_16MB_SECTOR_SIZE STM_M25P128_SECTOR_SIZE ++ ++/* ++ * ST Microelectronics Opcodes for Serial Flash ++ */ ++ ++#define STM_OP_WR_ENABLE 0x06 /* Write Enable */ ++#define STM_OP_WR_DISABLE 0x04 /* Write Disable */ ++#define STM_OP_RD_STATUS 0x05 /* Read Status */ ++#define STM_OP_WR_STATUS 0x01 /* Write Status */ ++#define STM_OP_RD_DATA 0x03 /* Read Data */ ++#define STM_OP_FAST_RD_DATA 0x0b /* Fast Read Data */ ++#define STM_OP_PAGE_PGRM 0x02 /* Page Program */ ++#define STM_OP_SECTOR_ERASE 0xd8 /* Sector Erase */ ++#define STM_OP_BULK_ERASE 0xc7 /* Bulk Erase */ ++#define STM_OP_DEEP_PWRDOWN 0xb9 /* Deep Power-Down Mode */ ++#define STM_OP_RD_SIG 0xab /* Read Electronic Signature */ ++ ++#define STM_STATUS_WIP 0x01 /* Write-In-Progress */ ++#define STM_STATUS_WEL 0x02 /* Write Enable Latch */ ++#define STM_STATUS_BP0 0x04 /* Block Protect 0 */ ++#define STM_STATUS_BP1 0x08 /* Block Protect 1 */ ++#define STM_STATUS_BP2 0x10 /* Block Protect 2 */ ++#define STM_STATUS_SRWD 0x80 /* Status Register Write Disable */ ++ ++/* ++ * SPI Flash Interface Registers ++ */ ++ ++#define SPI_FLASH_CTL 0x00 ++#define SPI_FLASH_OPCODE 0x04 ++#define SPI_FLASH_DATA 0x08 ++ ++#define SPI_CTL_START 0x00000100 ++#define SPI_CTL_BUSY 0x00010000 ++#define SPI_CTL_TXCNT_MASK 0x0000000f ++#define SPI_CTL_RXCNT_MASK 0x000000f0 ++#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff ++#define SPI_CTL_SIZE_MASK 0x00060000 ++ ++#define SPI_CTL_CLK_SEL_MASK 0x03000000 ++#define SPI_OPCODE_MASK 0x000000ff ++ ++#define SPI_STATUS_WIP STM_STATUS_WIP ++ ++#endif +--- a/arch/mips/ath25/ar2315.c ++++ b/arch/mips/ath25/ar2315.c +@@ -220,6 +220,28 @@ static struct platform_device ar2315_gpi + .num_resources = ARRAY_SIZE(ar2315_gpio_res) + }; + ++static struct resource ar2315_spiflash_res[] = { ++ { ++ .name = "spiflash_read", ++ .flags = IORESOURCE_MEM, ++ .start = AR2315_SPI_READ_BASE, ++ .end = AR2315_SPI_READ_BASE + AR2315_SPI_READ_SIZE - 1, ++ }, ++ { ++ .name = "spiflash_mmr", ++ .flags = IORESOURCE_MEM, ++ .start = AR2315_SPI_MMR_BASE, ++ .end = AR2315_SPI_MMR_BASE + AR2315_SPI_MMR_SIZE - 1, ++ }, ++}; ++ ++static struct platform_device ar2315_spiflash = { ++ .id = 0, ++ .name = "ar2315-spiflash", ++ .resource = ar2315_spiflash_res, ++ .num_resources = ARRAY_SIZE(ar2315_spiflash_res) ++}; ++ + void __init ar2315_init_devices(void) + { + /* Find board configuration */ +@@ -230,6 +252,8 @@ void __init ar2315_init_devices(void) + ar2315_gpio_res[1].end = ar2315_gpio_res[1].start; + platform_device_register(&ar2315_gpio); + ++ platform_device_register(&ar2315_spiflash); ++ + ar2315_eth_data.macaddr = ath25_board.config->enet0_mac; + ath25_add_ethernet(0, AR2315_ENET0_BASE, "eth0_mii", + AR2315_ENET0_MII_BASE, AR2315_IRQ_ENET0, diff --git a/target/linux/ath25/patches-5.4/130-watchdog.patch b/target/linux/ath25/patches-5.4/130-watchdog.patch new file mode 100644 index 0000000000..8a5bd83418 --- /dev/null +++ b/target/linux/ath25/patches-5.4/130-watchdog.patch @@ -0,0 +1,277 @@ +--- /dev/null ++++ b/drivers/watchdog/ar2315-wtd.c +@@ -0,0 +1,209 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, see . ++ * ++ * Copyright (C) 2008 John Crispin ++ * Based on EP93xx and ifxmips wdt driver ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define DRIVER_NAME "ar2315-wdt" ++ ++#define CLOCK_RATE 40000000 ++#define HEARTBEAT(x) (x < 1 || x > 90 ? 20 : x) ++ ++#define WDT_REG_TIMER 0x00 ++#define WDT_REG_CTRL 0x04 ++ ++#define WDT_CTRL_ACT_NONE 0x00000000 /* No action */ ++#define WDT_CTRL_ACT_NMI 0x00000001 /* NMI on watchdog */ ++#define WDT_CTRL_ACT_RESET 0x00000002 /* reset on watchdog */ ++ ++static int wdt_timeout = 20; ++static int started; ++static int in_use; ++static void __iomem *wdt_base; ++ ++static inline void ar2315_wdt_wr(unsigned reg, u32 val) ++{ ++ iowrite32(val, wdt_base + reg); ++} ++ ++static void ++ar2315_wdt_enable(void) ++{ ++ ar2315_wdt_wr(WDT_REG_TIMER, wdt_timeout * CLOCK_RATE); ++} ++ ++static ssize_t ++ar2315_wdt_write(struct file *file, const char __user *data, size_t len, ++ loff_t *ppos) ++{ ++ if (len) ++ ar2315_wdt_enable(); ++ return len; ++} ++ ++static int ++ar2315_wdt_open(struct inode *inode, struct file *file) ++{ ++ if (in_use) ++ return -EBUSY; ++ ar2315_wdt_enable(); ++ in_use = 1; ++ started = 1; ++ return nonseekable_open(inode, file); ++} ++ ++static int ++ar2315_wdt_release(struct inode *inode, struct file *file) ++{ ++ in_use = 0; ++ return 0; ++} ++ ++static irqreturn_t ++ar2315_wdt_interrupt(int irq, void *dev) ++{ ++ struct platform_device *pdev = (struct platform_device *)dev; ++ ++ if (started) { ++ dev_crit(&pdev->dev, "watchdog expired, rebooting system\n"); ++ emergency_restart(); ++ } else { ++ ar2315_wdt_wr(WDT_REG_CTRL, 0); ++ ar2315_wdt_wr(WDT_REG_TIMER, 0); ++ } ++ return IRQ_HANDLED; ++} ++ ++static struct watchdog_info ident = { ++ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, ++ .identity = "ar2315 Watchdog", ++}; ++ ++static long ++ar2315_wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ++{ ++ int new_wdt_timeout; ++ int ret = -ENOIOCTLCMD; ++ ++ switch (cmd) { ++ case WDIOC_GETSUPPORT: ++ ret = copy_to_user((void __user *)arg, &ident, sizeof(ident)) ? ++ -EFAULT : 0; ++ break; ++ case WDIOC_KEEPALIVE: ++ ar2315_wdt_enable(); ++ ret = 0; ++ break; ++ case WDIOC_SETTIMEOUT: ++ ret = get_user(new_wdt_timeout, (int __user *)arg); ++ if (ret) ++ break; ++ wdt_timeout = HEARTBEAT(new_wdt_timeout); ++ ar2315_wdt_enable(); ++ break; ++ case WDIOC_GETTIMEOUT: ++ ret = put_user(wdt_timeout, (int __user *)arg); ++ break; ++ } ++ return ret; ++} ++ ++static const struct file_operations ar2315_wdt_fops = { ++ .owner = THIS_MODULE, ++ .llseek = no_llseek, ++ .write = ar2315_wdt_write, ++ .unlocked_ioctl = ar2315_wdt_ioctl, ++ .open = ar2315_wdt_open, ++ .release = ar2315_wdt_release, ++}; ++ ++static struct miscdevice ar2315_wdt_miscdev = { ++ .minor = WATCHDOG_MINOR, ++ .name = "watchdog", ++ .fops = &ar2315_wdt_fops, ++}; ++ ++static int ++ar2315_wdt_probe(struct platform_device *dev) ++{ ++ struct resource *mem_res, *irq_res; ++ int ret = 0; ++ ++ if (wdt_base) ++ return -EBUSY; ++ ++ irq_res = platform_get_resource(dev, IORESOURCE_IRQ, 0); ++ if (!irq_res) { ++ dev_err(&dev->dev, "no IRQ resource\n"); ++ return -ENOENT; ++ } ++ ++ mem_res = platform_get_resource(dev, IORESOURCE_MEM, 0); ++ wdt_base = devm_ioremap_resource(&dev->dev, mem_res); ++ if (IS_ERR(wdt_base)) ++ return PTR_ERR(wdt_base); ++ ++ ret = devm_request_irq(&dev->dev, irq_res->start, ar2315_wdt_interrupt, ++ 0, DRIVER_NAME, dev); ++ if (ret) { ++ dev_err(&dev->dev, "failed to register inetrrupt\n"); ++ goto out; ++ } ++ ++ ret = misc_register(&ar2315_wdt_miscdev); ++ if (ret) ++ dev_err(&dev->dev, "failed to register miscdev\n"); ++ ++out: ++ return ret; ++} ++ ++static int ++ar2315_wdt_remove(struct platform_device *dev) ++{ ++ misc_deregister(&ar2315_wdt_miscdev); ++ return 0; ++} ++ ++static struct platform_driver ar2315_wdt_driver = { ++ .probe = ar2315_wdt_probe, ++ .remove = ar2315_wdt_remove, ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++module_platform_driver(ar2315_wdt_driver); ++ ++MODULE_DESCRIPTION("Atheros AR2315 hardware watchdog driver"); ++MODULE_AUTHOR("John Crispin "); ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS("platform:" DRIVER_NAME); +--- a/drivers/watchdog/Kconfig ++++ b/drivers/watchdog/Kconfig +@@ -1830,6 +1830,13 @@ config PIC32_DMT + To compile this driver as a loadable module, choose M here. + The module will be called pic32-dmt. + ++config AR2315_WDT ++ tristate "Atheros AR2315+ WiSoCs Watchdog Timer" ++ depends on ATH25 ++ help ++ Hardware driver for the built-in watchdog timer on the Atheros ++ AR2315/AR2316 WiSoCs. ++ + # PARISC Architecture + + # POWERPC Architecture +--- a/drivers/watchdog/Makefile ++++ b/drivers/watchdog/Makefile +@@ -161,6 +161,7 @@ obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o + obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o + obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o + obj-$(CONFIG_AR7_WDT) += ar7_wdt.o ++obj-$(CONFIG_AR2315_WDT) += ar2315-wtd.o + obj-$(CONFIG_TXX9_WDT) += txx9wdt.o + obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o + octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o +--- a/arch/mips/ath25/ar2315.c ++++ b/arch/mips/ath25/ar2315.c +@@ -220,6 +220,24 @@ static struct platform_device ar2315_gpi + .num_resources = ARRAY_SIZE(ar2315_gpio_res) + }; + ++static struct resource ar2315_wdt_res[] = { ++ { ++ .flags = IORESOURCE_MEM, ++ .start = AR2315_RST_BASE + AR2315_WDT_TIMER, ++ .end = AR2315_RST_BASE + AR2315_WDT_TIMER + 8 - 1, ++ }, ++ { ++ .flags = IORESOURCE_IRQ, ++ } ++}; ++ ++static struct platform_device ar2315_wdt = { ++ .id = 0, ++ .name = "ar2315-wdt", ++ .resource = ar2315_wdt_res, ++ .num_resources = ARRAY_SIZE(ar2315_wdt_res) ++}; ++ + static struct resource ar2315_spiflash_res[] = { + { + .name = "spiflash_read", +@@ -252,6 +270,11 @@ void __init ar2315_init_devices(void) + ar2315_gpio_res[1].end = ar2315_gpio_res[1].start; + platform_device_register(&ar2315_gpio); + ++ ar2315_wdt_res[1].start = irq_create_mapping(ar2315_misc_irq_domain, ++ AR2315_MISC_IRQ_WATCHDOG); ++ ar2315_wdt_res[1].end = ar2315_wdt_res[1].start; ++ platform_device_register(&ar2315_wdt); ++ + platform_device_register(&ar2315_spiflash); + + ar2315_eth_data.macaddr = ath25_board.config->enet0_mac; diff --git a/target/linux/ath25/patches-5.4/140-redboot_boardconfig.patch b/target/linux/ath25/patches-5.4/140-redboot_boardconfig.patch new file mode 100644 index 0000000000..0ffa12eec0 --- /dev/null +++ b/target/linux/ath25/patches-5.4/140-redboot_boardconfig.patch @@ -0,0 +1,60 @@ +--- a/drivers/mtd/parsers/redboot.c ++++ b/drivers/mtd/parsers/redboot.c +@@ -16,6 +16,8 @@ + #include + #include + ++#define BOARD_CONFIG_PART "boardconfig" ++ + struct fis_image_desc { + unsigned char name[16]; // Null terminated name + uint32_t flash_base; // Address within FLASH of image +@@ -67,6 +69,7 @@ static int parse_redboot_partitions(stru + const struct mtd_partition **pparts, + struct mtd_part_parser_data *data) + { ++ unsigned long max_offset = 0; + int nrparts = 0; + struct fis_image_desc *buf; + struct mtd_partition *parts; +@@ -234,14 +237,15 @@ static int parse_redboot_partitions(stru + } + } + #endif +- parts = kzalloc(sizeof(*parts)*nrparts + nulllen + namelen, GFP_KERNEL); ++ parts = kzalloc(sizeof(*parts) * (nrparts + 1) + nulllen + namelen + ++ sizeof(BOARD_CONFIG_PART), GFP_KERNEL); + + if (!parts) { + ret = -ENOMEM; + goto out; + } + +- nullname = (char *)&parts[nrparts]; ++ nullname = (char *)&parts[nrparts + 1]; + #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED + if (nulllen > 0) { + strcpy(nullname, nullstring); +@@ -260,6 +264,8 @@ static int parse_redboot_partitions(stru + } + #endif + for ( ; iimg->size; + parts[i].offset = fl->img->flash_base; + parts[i].name = names; +@@ -293,6 +299,13 @@ static int parse_redboot_partitions(stru + fl = fl->next; + kfree(tmp_fl); + } ++ if (master->size - max_offset >= master->erasesize) { ++ parts[nrparts].size = master->size - max_offset; ++ parts[nrparts].offset = max_offset; ++ parts[nrparts].name = names; ++ strcpy(names, BOARD_CONFIG_PART); ++ nrparts++; ++ } + ret = nrparts; + *pparts = parts; + out: diff --git a/target/linux/ath25/patches-5.4/141-redboot_partition_scan.patch b/target/linux/ath25/patches-5.4/141-redboot_partition_scan.patch new file mode 100644 index 0000000000..3302d6d247 --- /dev/null +++ b/target/linux/ath25/patches-5.4/141-redboot_partition_scan.patch @@ -0,0 +1,44 @@ +--- a/drivers/mtd/parsers/redboot.c ++++ b/drivers/mtd/parsers/redboot.c +@@ -88,12 +88,18 @@ static int parse_redboot_partitions(stru + + parse_redboot_of(master); + ++ buf = vmalloc(master->erasesize); ++ if (!buf) ++ return -ENOMEM; ++ ++ restart: + if ( directory < 0 ) { + offset = master->size + directory * master->erasesize; + while (mtd_block_isbad(master, offset)) { + if (!offset) { + nogood: + printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n"); ++ vfree(buf); + return -EIO; + } + offset -= master->erasesize; +@@ -106,10 +112,6 @@ static int parse_redboot_partitions(stru + goto nogood; + } + } +- buf = vmalloc(master->erasesize); +- +- if (!buf) +- return -ENOMEM; + + printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n", + master->name, offset); +@@ -182,6 +184,11 @@ static int parse_redboot_partitions(stru + } + if (i == numslots) { + /* Didn't find it */ ++ if (offset + master->erasesize < master->size) { ++ /* not at the end of the flash yet, maybe next block */ ++ directory++; ++ goto restart; ++ } + printk(KERN_NOTICE "No RedBoot partition table detected in %s\n", + master->name); + ret = 0; diff --git a/target/linux/ath25/patches-5.4/142-redboot_various_erase_size_fix.patch b/target/linux/ath25/patches-5.4/142-redboot_various_erase_size_fix.patch new file mode 100644 index 0000000000..2ac0eb92bf --- /dev/null +++ b/target/linux/ath25/patches-5.4/142-redboot_various_erase_size_fix.patch @@ -0,0 +1,72 @@ +--- a/drivers/mtd/parsers/redboot.c ++++ b/drivers/mtd/parsers/redboot.c +@@ -65,6 +65,22 @@ static void parse_redboot_of(struct mtd_ + directory = dirblock; + } + ++static uint32_t mtd_get_offset_erasesize(struct mtd_info *mtd, uint64_t offset) ++{ ++ struct mtd_erase_region_info *regions = mtd->eraseregions; ++ int i; ++ ++ for (i = 0; i < mtd->numeraseregions; i++) { ++ if (regions[i].offset + ++ regions[i].numblocks * regions[i].erasesize <= offset) ++ continue; ++ ++ return regions[i].erasesize; ++ } ++ ++ return mtd->erasesize; ++} ++ + static int parse_redboot_partitions(struct mtd_info *master, + const struct mtd_partition **pparts, + struct mtd_part_parser_data *data) +@@ -81,6 +97,7 @@ static int parse_redboot_partitions(stru + int namelen = 0; + int nulllen = 0; + int numslots; ++ int first_slot; + unsigned long offset; + #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED + static char nullstring[] = "unallocated"; +@@ -195,7 +212,10 @@ static int parse_redboot_partitions(stru + goto out; + } + +- for (i = 0; i < numslots; i++) { ++ first_slot = (buf[i].flash_base & (master->erasesize - 1)) / ++ sizeof(struct fis_image_desc); ++ ++ for (i = first_slot; i < first_slot + numslots; i++) { + struct fis_list *new_fl, **prev; + + if (buf[i].name[0] == 0xff) { +@@ -271,12 +291,13 @@ static int parse_redboot_partitions(stru + } + #endif + for ( ; iimg->size; + parts[i].offset = fl->img->flash_base; + parts[i].name = names; + ++ if (max_offset < parts[i].offset + parts[i].size) ++ max_offset = parts[i].offset + parts[i].size; ++ + strcpy(names, fl->img->name); + #ifdef CONFIG_MTD_REDBOOT_PARTS_READONLY + if (!memcmp(names, "RedBoot", 8) || +@@ -306,7 +327,9 @@ static int parse_redboot_partitions(stru + fl = fl->next; + kfree(tmp_fl); + } +- if (master->size - max_offset >= master->erasesize) { ++ ++ if (master->size - max_offset >= ++ mtd_get_offset_erasesize(master, max_offset)) { + parts[nrparts].size = master->size - max_offset; + parts[nrparts].offset = max_offset; + parts[nrparts].name = names; diff --git a/target/linux/ath25/patches-5.4/210-reset_button.patch b/target/linux/ath25/patches-5.4/210-reset_button.patch new file mode 100644 index 0000000000..b3f7a14cda --- /dev/null +++ b/target/linux/ath25/patches-5.4/210-reset_button.patch @@ -0,0 +1,71 @@ +--- a/arch/mips/ath25/Makefile ++++ b/arch/mips/ath25/Makefile +@@ -8,7 +8,7 @@ + # Copyright (C) 2006-2009 Felix Fietkau + # + +-obj-y += board.o prom.o devices.o ++obj-y += board.o prom.o devices.o reset.o + + obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + +--- /dev/null ++++ b/arch/mips/ath25/reset.c +@@ -0,0 +1,57 @@ ++#include ++#include ++#include ++#include ++#include ++#include ++#include "devices.h" ++ ++static int __init ++ar231x_init_reset(void) ++{ ++ struct platform_device *pdev; ++ struct gpio_keys_platform_data pdata; ++ struct gpio_keys_button *p; ++ int err; ++ ++ if (ath25_board.config->reset_config_gpio == 0xffff) ++ return -ENODEV; ++ ++ p = kzalloc(sizeof(*p), GFP_KERNEL); ++ if (!p) ++ goto err; ++ ++ p->desc = "reset"; ++ p->type = EV_KEY; ++ p->code = KEY_RESTART; ++ p->debounce_interval = 60; ++ p->gpio = ath25_board.config->reset_config_gpio; ++ ++ memset(&pdata, 0, sizeof(pdata)); ++ pdata.poll_interval = 20; ++ pdata.buttons = p; ++ pdata.nbuttons = 1; ++ ++ pdev = platform_device_alloc("gpio-keys-polled", 0); ++ if (!pdev) ++ goto err_free; ++ ++ err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); ++ if (err) ++ goto err_put_pdev; ++ ++ err = platform_device_add(pdev); ++ if (err) ++ goto err_put_pdev; ++ ++ return 0; ++ ++err_put_pdev: ++ platform_device_put(pdev); ++err_free: ++ kfree(p); ++err: ++ return -ENOMEM; ++} ++ ++device_initcall(ar231x_init_reset); diff --git a/target/linux/ath25/patches-5.4/220-enet_micrel_workaround.patch b/target/linux/ath25/patches-5.4/220-enet_micrel_workaround.patch new file mode 100644 index 0000000000..9051e1b466 --- /dev/null +++ b/target/linux/ath25/patches-5.4/220-enet_micrel_workaround.patch @@ -0,0 +1,111 @@ +--- a/drivers/net/ethernet/atheros/ar231x/ar231x.c ++++ b/drivers/net/ethernet/atheros/ar231x/ar231x.c +@@ -135,6 +135,7 @@ static int ar231x_mdiobus_write(struct m + static int ar231x_mdiobus_reset(struct mii_bus *bus); + static int ar231x_mdiobus_probe(struct net_device *dev); + static void ar231x_adjust_link(struct net_device *dev); ++static bool no_phy; + + #ifndef ERR + #define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args) +@@ -167,6 +168,32 @@ static const struct net_device_ops ar231 + #endif + }; + ++static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id) ++{ ++ int phy_reg; ++ ++ /** ++ * Grab the bits from PHYIR1, and put them ++ * in the upper half. ++ */ ++ phy_reg = mdiobus_read(bus, addr, MII_PHYSID1); ++ ++ if (phy_reg < 0) ++ return -EIO; ++ ++ *phy_id = (phy_reg & 0xffff) << 16; ++ ++ /* Grab the bits from PHYIR2, and put them in the lower half */ ++ phy_reg = mdiobus_read(bus, addr, MII_PHYSID2); ++ ++ if (phy_reg < 0) ++ return -EIO; ++ ++ *phy_id |= (phy_reg & 0xffff); ++ ++ return 0; ++} ++ + static int ar231x_probe(struct platform_device *pdev) + { + struct net_device *dev; +@@ -274,6 +301,24 @@ static int ar231x_probe(struct platform_ + + mdiobus_register(sp->mii_bus); + ++ /** ++ * Workaround for Micrel switch, which is only available on ++ * one PHY and cannot be configured through MDIO. ++ */ ++ if (!no_phy) { ++ u32 phy_id = 0; ++ ++ get_phy_id(sp->mii_bus, 1, &phy_id); ++ if (phy_id == 0x00221450) ++ no_phy = true; ++ } ++ if (no_phy) { ++ sp->link = 1; ++ netif_carrier_on(dev); ++ return 0; ++ } ++ no_phy = true; ++ + if (ar231x_mdiobus_probe(dev) != 0) { + printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name); + rx_tasklet_cleanup(dev); +@@ -327,8 +372,10 @@ static int ar231x_remove(struct platform + rx_tasklet_cleanup(dev); + ar231x_init_cleanup(dev); + unregister_netdev(dev); +- mdiobus_unregister(sp->mii_bus); +- mdiobus_free(sp->mii_bus); ++ if (sp->mii_bus) { ++ mdiobus_unregister(sp->mii_bus); ++ mdiobus_free(sp->mii_bus); ++ } + kfree(dev); + return 0; + } +@@ -871,7 +918,8 @@ static int ar231x_open(struct net_device + + sp->eth_regs->mac_control |= MAC_CONTROL_RE; + +- phy_start(sp->phy_dev); ++ if (sp->phy_dev) ++ phy_start(sp->phy_dev); + + return 0; + } +@@ -952,7 +1000,8 @@ static int ar231x_close(struct net_devic + + #endif + +- phy_stop(sp->phy_dev); ++ if (sp->phy_dev) ++ phy_stop(sp->phy_dev); + + return 0; + } +@@ -996,6 +1045,9 @@ static int ar231x_ioctl(struct net_devic + { + struct ar231x_private *sp = netdev_priv(dev); + ++ if (!sp->phy_dev) ++ return -ENODEV; ++ + switch (cmd) { + case SIOCGMIIPHY: + case SIOCGMIIREG: diff --git a/target/linux/ath25/patches-5.4/330-board_leds.patch b/target/linux/ath25/patches-5.4/330-board_leds.patch new file mode 100644 index 0000000000..e357fc6a64 --- /dev/null +++ b/target/linux/ath25/patches-5.4/330-board_leds.patch @@ -0,0 +1,116 @@ +--- a/arch/mips/ath25/ar2315.c ++++ b/arch/mips/ath25/ar2315.c +@@ -23,6 +23,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -260,6 +261,50 @@ static struct platform_device ar2315_spi + .num_resources = ARRAY_SIZE(ar2315_spiflash_res) + }; + ++#ifdef CONFIG_LEDS_GPIO ++static struct gpio_led ar2315_leds[6]; ++static struct gpio_led_platform_data ar2315_led_data = { ++ .leds = (void *)ar2315_leds, ++}; ++ ++static struct platform_device ar2315_gpio_leds = { ++ .name = "leds-gpio", ++ .id = -1, ++ .dev = { ++ .platform_data = (void *)&ar2315_led_data, ++ } ++}; ++ ++static void __init ar2315_init_gpio_leds(void) ++{ ++ static char led_names[6][6]; ++ int i, led = 0; ++ ++ ar2315_led_data.num_leds = 0; ++ for (i = 1; i < 8; i++) { ++ if ((i == AR2315_RESET_GPIO) || ++ (i == ath25_board.config->reset_config_gpio)) ++ continue; ++ ++ if (i == ath25_board.config->sys_led_gpio) ++ strcpy(led_names[led], "wlan"); ++ else ++ sprintf(led_names[led], "gpio%d", i); ++ ++ ar2315_leds[led].name = led_names[led]; ++ ar2315_leds[led].gpio = i; ++ ar2315_leds[led].active_low = 0; ++ led++; ++ } ++ ar2315_led_data.num_leds = led; ++ platform_device_register(&ar2315_gpio_leds); ++} ++#else ++static inline void ar2315_init_gpio_leds(void) ++{ ++} ++#endif ++ + void __init ar2315_init_devices(void) + { + /* Find board configuration */ +@@ -270,6 +315,8 @@ void __init ar2315_init_devices(void) + ar2315_gpio_res[1].end = ar2315_gpio_res[1].start; + platform_device_register(&ar2315_gpio); + ++ ar2315_init_gpio_leds(); ++ + ar2315_wdt_res[1].start = irq_create_mapping(ar2315_misc_irq_domain, + AR2315_MISC_IRQ_WATCHDOG); + ar2315_wdt_res[1].end = ar2315_wdt_res[1].start; +--- a/arch/mips/ath25/ar5312.c ++++ b/arch/mips/ath25/ar5312.c +@@ -23,6 +23,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -231,6 +232,23 @@ static struct platform_device ar5312_gpi + .num_resources = ARRAY_SIZE(ar5312_gpio_res), + }; + ++#ifdef CONFIG_LEDS_GPIO ++static struct gpio_led ar5312_leds[] = { ++ { .name = "wlan", .gpio = 0, .active_low = 1, }, ++}; ++ ++static const struct gpio_led_platform_data ar5312_led_data = { ++ .num_leds = ARRAY_SIZE(ar5312_leds), ++ .leds = (void *)ar5312_leds, ++}; ++ ++static struct platform_device ar5312_gpio_leds = { ++ .name = "leds-gpio", ++ .id = -1, ++ .dev.platform_data = (void *)&ar5312_led_data, ++}; ++#endif ++ + static void __init ar5312_flash_init(void) + { + void __iomem *flashctl_base; +@@ -301,6 +319,11 @@ void __init ar5312_init_devices(void) + + platform_device_register(&ar5312_gpio); + ++#ifdef CONFIG_LEDS_GPIO ++ ar5312_leds[0].gpio = config->sys_led_gpio; ++ platform_device_register(&ar5312_gpio_leds); ++#endif ++ + /* Fix up MAC addresses if necessary */ + if (is_broadcast_ether_addr(config->enet0_mac)) + ether_addr_copy(config->enet0_mac, config->enet1_mac); diff --git a/target/linux/ath25/profiles/00-default.mk b/target/linux/ath25/profiles/00-default.mk new file mode 100644 index 0000000000..b40eb1b0ce --- /dev/null +++ b/target/linux/ath25/profiles/00-default.mk @@ -0,0 +1,16 @@ +# +# Copyright (C) 2011 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/Default + NAME:=Default Profile + PRIORITY:=1 +endef + +define Profile/Default/Description + Default package set compatible with most boards. +endef +$(eval $(call Profile,Default)) diff --git a/target/linux/ath79/image/Makefile b/target/linux/ath79/image/Makefile index a555cfc6d5..4b4a67fd4d 100644 --- a/target/linux/ath79/image/Makefile +++ b/target/linux/ath79/image/Makefile @@ -19,11 +19,6 @@ define Build/loader-kernel $(call Build/loader-common,LOADER_DATA="$@") endef -define Build/loader-kernel-cmdline - $(call Build/loader-common,LOADER_DATA="$@") -endef - - define Build/loader-okli-compile $(call Build/loader-common,FLASH_OFFS=$(LOADER_FLASH_OFFS) FLASH_MAX=0) endef diff --git a/target/linux/bcm27xx/patches-5.4/950-0031-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch b/target/linux/bcm27xx/patches-5.4/950-0031-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch index 8e0ccd4d4e..e89250df04 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0031-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0031-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch @@ -14,7 +14,7 @@ use the same logic. --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c -@@ -2576,7 +2576,12 @@ static int pl011_setup_port(struct devic +@@ -2575,7 +2575,12 @@ static int pl011_setup_port(struct devic if (IS_ERR(base)) return PTR_ERR(base); diff --git a/target/linux/bcm27xx/patches-5.4/950-0032-amba_pl011-Round-input-clock-up.patch b/target/linux/bcm27xx/patches-5.4/950-0032-amba_pl011-Round-input-clock-up.patch index 7d5eb19c29..fec36493b3 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0032-amba_pl011-Round-input-clock-up.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0032-amba_pl011-Round-input-clock-up.patch @@ -59,7 +59,7 @@ Signed-off-by: Phil Elwell /* Clear pending error and receive interrupts */ pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS | -@@ -2322,7 +2339,7 @@ static int __init pl011_console_setup(st +@@ -2321,7 +2338,7 @@ static int pl011_console_setup(struct co plat->init(); } @@ -68,7 +68,7 @@ Signed-off-by: Phil Elwell if (uap->vendor->fixed_options) { baud = uap->fixed_baud; -@@ -2507,6 +2524,7 @@ static struct uart_driver amba_reg = { +@@ -2506,6 +2523,7 @@ static struct uart_driver amba_reg = { .cons = AMBA_CONSOLE, }; @@ -76,7 +76,7 @@ Signed-off-by: Phil Elwell static int pl011_probe_dt_alias(int index, struct device *dev) { struct device_node *np; -@@ -2538,6 +2556,7 @@ static int pl011_probe_dt_alias(int inde +@@ -2537,6 +2555,7 @@ static int pl011_probe_dt_alias(int inde return ret; } diff --git a/target/linux/bcm27xx/patches-5.4/950-0034-amba_pl011-Add-cts-event-workaround-DT-property.patch b/target/linux/bcm27xx/patches-5.4/950-0034-amba_pl011-Add-cts-event-workaround-DT-property.patch index 07989b5a1f..4c4cbb13c5 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0034-amba_pl011-Add-cts-event-workaround-DT-property.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0034-amba_pl011-Add-cts-event-workaround-DT-property.patch @@ -36,7 +36,7 @@ Signed-off-by: Phil Elwell - reg --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c -@@ -2660,6 +2660,11 @@ static int pl011_probe(struct amba_devic +@@ -2662,6 +2662,11 @@ static int pl011_probe(struct amba_devic if (IS_ERR(uap->clk)) return PTR_ERR(uap->clk); diff --git a/target/linux/bcm27xx/patches-5.4/950-0040-fbdev-add-FBIOCOPYAREA-ioctl.patch b/target/linux/bcm27xx/patches-5.4/950-0040-fbdev-add-FBIOCOPYAREA-ioctl.patch index 8fa4ddf5c8..77eb123cfb 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0040-fbdev-add-FBIOCOPYAREA-ioctl.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0040-fbdev-add-FBIOCOPYAREA-ioctl.patch @@ -234,7 +234,7 @@ Signed-off-by: Dave Stevenson static int bcm2708_fb_register(struct bcm2708_fb *fb) --- a/drivers/video/fbdev/core/fbmem.c +++ b/drivers/video/fbdev/core/fbmem.c -@@ -1076,6 +1076,30 @@ fb_blank(struct fb_info *info, int blank +@@ -1072,6 +1072,30 @@ fb_blank(struct fb_info *info, int blank } EXPORT_SYMBOL(fb_blank); @@ -265,7 +265,7 @@ Signed-off-by: Dave Stevenson static long do_fb_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg) { -@@ -1084,6 +1108,7 @@ static long do_fb_ioctl(struct fb_info * +@@ -1080,6 +1104,7 @@ static long do_fb_ioctl(struct fb_info * struct fb_fix_screeninfo fix; struct fb_cmap cmap_from; struct fb_cmap_user cmap; @@ -273,7 +273,7 @@ Signed-off-by: Dave Stevenson void __user *argp = (void __user *)arg; long ret = 0; -@@ -1159,6 +1184,15 @@ static long do_fb_ioctl(struct fb_info * +@@ -1155,6 +1180,15 @@ static long do_fb_ioctl(struct fb_info * unlock_fb_info(info); console_unlock(); break; @@ -289,7 +289,7 @@ Signed-off-by: Dave Stevenson default: lock_fb_info(info); fb = info->fbops; -@@ -1304,6 +1338,7 @@ static long fb_compat_ioctl(struct file +@@ -1300,6 +1334,7 @@ static long fb_compat_ioctl(struct file case FBIOPAN_DISPLAY: case FBIOGET_CON2FBMAP: case FBIOPUT_CON2FBMAP: diff --git a/target/linux/bcm27xx/patches-5.4/950-0222-xhci-implement-xhci_fixup_endpoint-for-interval-adju.patch b/target/linux/bcm27xx/patches-5.4/950-0222-xhci-implement-xhci_fixup_endpoint-for-interval-adju.patch index 0bb08a56fa..5710a88342 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0222-xhci-implement-xhci_fixup_endpoint-for-interval-adju.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0222-xhci-implement-xhci_fixup_endpoint-for-interval-adju.patch @@ -119,7 +119,7 @@ Signed-off-by: Jonathan Bell * non-error returns are a promise to giveback() the urb later * we drop ownership so next owner (or urb unlink) can get it */ -@@ -5334,6 +5431,7 @@ static const struct hc_driver xhci_hc_dr +@@ -5335,6 +5432,7 @@ static const struct hc_driver xhci_hc_dr .endpoint_reset = xhci_endpoint_reset, .check_bandwidth = xhci_check_bandwidth, .reset_bandwidth = xhci_reset_bandwidth, diff --git a/target/linux/bcm27xx/patches-5.4/950-0283-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch b/target/linux/bcm27xx/patches-5.4/950-0283-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch index f265beb34e..6a288e06a8 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0283-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0283-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch @@ -33,7 +33,7 @@ Signed-off-by: Jonathan Bell #define USB_VENDOR_ID_BELKIN 0x050d #define USB_DEVICE_ID_FLIP_KVM 0x3201 -@@ -1237,6 +1240,9 @@ +@@ -1238,6 +1241,9 @@ #define USB_VENDOR_ID_XAT 0x2505 #define USB_DEVICE_ID_XAT_CSR 0x0220 @@ -58,6 +58,6 @@ Signed-off-by: Jonathan Bell { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_QUAD_USB_JOYPAD), HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT }, { HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_XIN_MO_DUAL_ARCADE), HID_QUIRK_MULTI_INPUT }, + { HID_USB_DEVICE(USB_VENDOR_ID_XENTA, USB_DEVICE_ID_AIRMOUSE_MX3), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE }, + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_GROUP_AUDIO), HID_QUIRK_NOGET }, { 0 } - }; diff --git a/target/linux/bcm27xx/patches-5.4/950-0316-kbuild-Allow-.dtbo-overlays-to-be-built-piecemeal.patch b/target/linux/bcm27xx/patches-5.4/950-0316-kbuild-Allow-.dtbo-overlays-to-be-built-piecemeal.patch index 08115b256f..18b6260672 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0316-kbuild-Allow-.dtbo-overlays-to-be-built-piecemeal.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0316-kbuild-Allow-.dtbo-overlays-to-be-built-piecemeal.patch @@ -24,7 +24,7 @@ Signed-off-by: Phil Elwell --- a/Makefile +++ b/Makefile -@@ -1258,6 +1258,9 @@ ifneq ($(dtstree),) +@@ -1264,6 +1264,9 @@ ifneq ($(dtstree),) %.dtb: include/config/kernel.release scripts_dtc $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@ diff --git a/target/linux/bcm27xx/patches-5.4/950-0460-Kbuild-Allow-.dtbo-overlays-to-be-built-adjust.patch b/target/linux/bcm27xx/patches-5.4/950-0460-Kbuild-Allow-.dtbo-overlays-to-be-built-adjust.patch index b8f974c733..0e35d756ed 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0460-Kbuild-Allow-.dtbo-overlays-to-be-built-adjust.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0460-Kbuild-Allow-.dtbo-overlays-to-be-built-adjust.patch @@ -15,7 +15,7 @@ Signed-off-by: Nataliya Korovkina --- a/Makefile +++ b/Makefile -@@ -1258,7 +1258,7 @@ ifneq ($(dtstree),) +@@ -1264,7 +1264,7 @@ ifneq ($(dtstree),) %.dtb: include/config/kernel.release scripts_dtc $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@ diff --git a/target/linux/generic/backport-5.4/011-kbuild-export-SUBARCH.patch b/target/linux/generic/backport-5.4/011-kbuild-export-SUBARCH.patch index 3c305b4b81..60defa39c5 100644 --- a/target/linux/generic/backport-5.4/011-kbuild-export-SUBARCH.patch +++ b/target/linux/generic/backport-5.4/011-kbuild-export-SUBARCH.patch @@ -10,7 +10,7 @@ Signed-off-by: Felix Fietkau --- a/Makefile +++ b/Makefile -@@ -487,7 +487,7 @@ KBUILD_LDFLAGS := +@@ -493,7 +493,7 @@ KBUILD_LDFLAGS := GCC_PLUGINS_CFLAGS := CLANG_FLAGS := @@ -18,4 +18,4 @@ Signed-off-by: Felix Fietkau +export ARCH SRCARCH SUBARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC export CPP AR NM STRIP OBJCOPY OBJDUMP OBJSIZE READELF PAHOLE LEX YACC AWK INSTALLKERNEL export PERL PYTHON PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX - export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE + export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ diff --git a/target/linux/generic/backport-5.4/041-v5.5-arm64-Implement-optimised-checksum-routine.patch b/target/linux/generic/backport-5.4/041-v5.5-arm64-Implement-optimised-checksum-routine.patch new file mode 100644 index 0000000000..00ec7d0207 --- /dev/null +++ b/target/linux/generic/backport-5.4/041-v5.5-arm64-Implement-optimised-checksum-routine.patch @@ -0,0 +1,176 @@ +From: Robin Murphy +Date: Wed, 15 Jan 2020 16:42:39 +0000 +Subject: [PATCH] arm64: Implement optimised checksum routine + +Apparently there exist certain workloads which rely heavily on software +checksumming, for which the generic do_csum() implementation becomes a +significant bottleneck. Therefore let's give arm64 its own optimised +version - for ease of maintenance this foregoes assembly or intrisics, +and is thus not actually arm64-specific, but does rely heavily on C +idioms that translate well to the A64 ISA and the typical load/store +capabilities of most ARMv8 CPU cores. + +The resulting increase in checksum throughput scales nicely with buffer +size, tending towards 4x for a small in-order core (Cortex-A53), and up +to 6x or more for an aggressive big core (Ampere eMAG). + +Reported-by: Lingyan Huang +Tested-by: Lingyan Huang +Signed-off-by: Robin Murphy +Signed-off-by: Will Deacon +--- + create mode 100644 arch/arm64/lib/csum.c + +--- a/arch/arm64/include/asm/checksum.h ++++ b/arch/arm64/include/asm/checksum.h +@@ -36,6 +36,9 @@ static inline __sum16 ip_fast_csum(const + } + #define ip_fast_csum ip_fast_csum + ++extern unsigned int do_csum(const unsigned char *buff, int len); ++#define do_csum do_csum ++ + #include + + #endif /* __ASM_CHECKSUM_H */ +--- a/arch/arm64/lib/Makefile ++++ b/arch/arm64/lib/Makefile +@@ -1,9 +1,9 @@ + # SPDX-License-Identifier: GPL-2.0 + lib-y := clear_user.o delay.o copy_from_user.o \ + copy_to_user.o copy_in_user.o copy_page.o \ +- clear_page.o memchr.o memcpy.o memmove.o memset.o \ +- memcmp.o strcmp.o strncmp.o strlen.o strnlen.o \ +- strchr.o strrchr.o tishift.o ++ clear_page.o csum.o memchr.o memcpy.o memmove.o \ ++ memset.o memcmp.o strcmp.o strncmp.o strlen.o \ ++ strnlen.o strchr.o strrchr.o tishift.o + + ifeq ($(CONFIG_KERNEL_MODE_NEON), y) + obj-$(CONFIG_XOR_BLOCKS) += xor-neon.o +--- /dev/null ++++ b/arch/arm64/lib/csum.c +@@ -0,0 +1,123 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++// Copyright (C) 2019-2020 Arm Ltd. ++ ++#include ++#include ++#include ++ ++#include ++ ++/* Looks dumb, but generates nice-ish code */ ++static u64 accumulate(u64 sum, u64 data) ++{ ++ __uint128_t tmp = (__uint128_t)sum + data; ++ return tmp + (tmp >> 64); ++} ++ ++unsigned int do_csum(const unsigned char *buff, int len) ++{ ++ unsigned int offset, shift, sum; ++ const u64 *ptr; ++ u64 data, sum64 = 0; ++ ++ offset = (unsigned long)buff & 7; ++ /* ++ * This is to all intents and purposes safe, since rounding down cannot ++ * result in a different page or cache line being accessed, and @buff ++ * should absolutely not be pointing to anything read-sensitive. We do, ++ * however, have to be careful not to piss off KASAN, which means using ++ * unchecked reads to accommodate the head and tail, for which we'll ++ * compensate with an explicit check up-front. ++ */ ++ kasan_check_read(buff, len); ++ ptr = (u64 *)(buff - offset); ++ len = len + offset - 8; ++ ++ /* ++ * Head: zero out any excess leading bytes. Shifting back by the same ++ * amount should be at least as fast as any other way of handling the ++ * odd/even alignment, and means we can ignore it until the very end. ++ */ ++ shift = offset * 8; ++ data = READ_ONCE_NOCHECK(*ptr++); ++#ifdef __LITTLE_ENDIAN ++ data = (data >> shift) << shift; ++#else ++ data = (data << shift) >> shift; ++#endif ++ ++ /* ++ * Body: straightforward aligned loads from here on (the paired loads ++ * underlying the quadword type still only need dword alignment). The ++ * main loop strictly excludes the tail, so the second loop will always ++ * run at least once. ++ */ ++ while (unlikely(len > 64)) { ++ __uint128_t tmp1, tmp2, tmp3, tmp4; ++ ++ tmp1 = READ_ONCE_NOCHECK(*(__uint128_t *)ptr); ++ tmp2 = READ_ONCE_NOCHECK(*(__uint128_t *)(ptr + 2)); ++ tmp3 = READ_ONCE_NOCHECK(*(__uint128_t *)(ptr + 4)); ++ tmp4 = READ_ONCE_NOCHECK(*(__uint128_t *)(ptr + 6)); ++ ++ len -= 64; ++ ptr += 8; ++ ++ /* This is the "don't dump the carry flag into a GPR" idiom */ ++ tmp1 += (tmp1 >> 64) | (tmp1 << 64); ++ tmp2 += (tmp2 >> 64) | (tmp2 << 64); ++ tmp3 += (tmp3 >> 64) | (tmp3 << 64); ++ tmp4 += (tmp4 >> 64) | (tmp4 << 64); ++ tmp1 = ((tmp1 >> 64) << 64) | (tmp2 >> 64); ++ tmp1 += (tmp1 >> 64) | (tmp1 << 64); ++ tmp3 = ((tmp3 >> 64) << 64) | (tmp4 >> 64); ++ tmp3 += (tmp3 >> 64) | (tmp3 << 64); ++ tmp1 = ((tmp1 >> 64) << 64) | (tmp3 >> 64); ++ tmp1 += (tmp1 >> 64) | (tmp1 << 64); ++ tmp1 = ((tmp1 >> 64) << 64) | sum64; ++ tmp1 += (tmp1 >> 64) | (tmp1 << 64); ++ sum64 = tmp1 >> 64; ++ } ++ while (len > 8) { ++ __uint128_t tmp; ++ ++ sum64 = accumulate(sum64, data); ++ tmp = READ_ONCE_NOCHECK(*(__uint128_t *)ptr); ++ ++ len -= 16; ++ ptr += 2; ++ ++#ifdef __LITTLE_ENDIAN ++ data = tmp >> 64; ++ sum64 = accumulate(sum64, tmp); ++#else ++ data = tmp; ++ sum64 = accumulate(sum64, tmp >> 64); ++#endif ++ } ++ if (len > 0) { ++ sum64 = accumulate(sum64, data); ++ data = READ_ONCE_NOCHECK(*ptr); ++ len -= 8; ++ } ++ /* ++ * Tail: zero any over-read bytes similarly to the head, again ++ * preserving odd/even alignment. ++ */ ++ shift = len * -8; ++#ifdef __LITTLE_ENDIAN ++ data = (data << shift) >> shift; ++#else ++ data = (data >> shift) << shift; ++#endif ++ sum64 = accumulate(sum64, data); ++ ++ /* Finally, folding */ ++ sum64 += (sum64 >> 32) | (sum64 << 32); ++ sum = sum64 >> 32; ++ sum += (sum >> 16) | (sum << 16); ++ if (offset & 1) ++ return (u16)swab32(sum); ++ ++ return sum >> 16; ++} diff --git a/target/linux/generic/backport-5.4/042-v5.5-arm64-csum-Fix-pathological-zero-length-calls.patch b/target/linux/generic/backport-5.4/042-v5.5-arm64-csum-Fix-pathological-zero-length-calls.patch new file mode 100644 index 0000000000..50b210e14f --- /dev/null +++ b/target/linux/generic/backport-5.4/042-v5.5-arm64-csum-Fix-pathological-zero-length-calls.patch @@ -0,0 +1,28 @@ +From: Robin Murphy +Date: Fri, 17 Jan 2020 15:48:39 +0000 +Subject: [PATCH] arm64: csum: Fix pathological zero-length calls + +In validating the checksumming results of the new routine, I sadly +neglected to test its not-checksumming results. Thus it slipped through +that the one case where @buff is already dword-aligned and @len = 0 +manages to defeat the tail-masking logic and behave as if @len = 8. +For a zero length it doesn't make much sense to deference @buff anyway, +so just add an early return (which has essentially zero impact on +performance). + +Signed-off-by: Robin Murphy +Signed-off-by: Will Deacon +--- + +--- a/arch/arm64/lib/csum.c ++++ b/arch/arm64/lib/csum.c +@@ -20,6 +20,9 @@ unsigned int do_csum(const unsigned char + const u64 *ptr; + u64 data, sum64 = 0; + ++ if (unlikely(len == 0)) ++ return 0; ++ + offset = (unsigned long)buff & 7; + /* + * This is to all intents and purposes safe, since rounding down cannot diff --git a/target/linux/generic/backport-5.4/700-v5.5-net-core-allow-fast-GRO-for-skbs-with-Ethernet-heade.patch b/target/linux/generic/backport-5.4/700-v5.5-net-core-allow-fast-GRO-for-skbs-with-Ethernet-heade.patch new file mode 100644 index 0000000000..f864a7899c --- /dev/null +++ b/target/linux/generic/backport-5.4/700-v5.5-net-core-allow-fast-GRO-for-skbs-with-Ethernet-heade.patch @@ -0,0 +1,78 @@ +From: Alexander Lobakin +Date: Fri, 15 Nov 2019 12:11:35 +0300 +Subject: [PATCH] net: core: allow fast GRO for skbs with Ethernet header in + head + +Commit 78d3fd0b7de8 ("gro: Only use skb_gro_header for completely +non-linear packets") back in May'09 (v2.6.31-rc1) has changed the +original condition '!skb_headlen(skb)' to +'skb->mac_header == skb->tail' in gro_reset_offset() saying: "Since +the drivers that need this optimisation all provide completely +non-linear packets" (note that this condition has become the current +'skb_mac_header(skb) == skb_tail_pointer(skb)' later with commmit +ced14f6804a9 ("net: Correct comparisons and calculations using +skb->tail and skb-transport_header") without any functional changes). + +For now, we have the following rough statistics for v5.4-rc7: +1) napi_gro_frags: 14 +2) napi_gro_receive with skb->head containing (most of) payload: 83 +3) napi_gro_receive with skb->head containing all the headers: 20 +4) napi_gro_receive with skb->head containing only Ethernet header: 2 + +With the current condition, fast GRO with the usage of +NAPI_GRO_CB(skb)->frag0 is available only in the [1] case. +Packets pushed by [2] and [3] go through the 'slow' path, but +it's not a problem for them as they already contain all the needed +headers in skb->head, so pskb_may_pull() only moves skb->data. + +The layout of skbs in the fourth [4] case at the moment of +dev_gro_receive() is identical to skbs that have come through [1], +as napi_frags_skb() pulls Ethernet header to skb->head. The only +difference is that the mentioned condition is always false for them, +because skb_put() and friends irreversibly alter the tail pointer. +They also go through the 'slow' path, but now every single +pskb_may_pull() in every single .gro_receive() will call the *really* +slow __pskb_pull_tail() to pull headers to head. This significantly +decreases the overall performance for no visible reasons. + +The only two users of method [4] is: +* drivers/staging/qlge +* drivers/net/wireless/iwlwifi (all three variants: dvm, mvm, mvm-mq) + +Note that in case with wireless drivers we can't use [1] +(napi_gro_frags()) at least for now and mac80211 stack always +performs pushes and pulls anyways, so performance hit is inavoidable. + +At the moment of v2.6.31 the mentioned change was necessary (that's +why I don't add the "Fixes:" tag), but it became obsolete since +skb_gro_mac_header() has gone in commit a50e233c50db ("net-gro: +restore frag0 optimization"), so we can simply revert the condition +in gro_reset_offset() to allow skbs from [4] go through the 'fast' +path just like in case [1]. + +This was tested on a 600 MHz MIPS CPU and a custom driver and this +patch gave boosts up to 40 Mbps to method [4] in both directions +comparing to net-next, which made overall performance relatively +close to [1] (without it, [4] is the slowest). + +v2: +- Add more references and explanations to commit message +- Fix some typos ibid +- No functional changes + +Signed-off-by: Alexander Lobakin +Signed-off-by: David S. Miller +--- + +--- a/net/core/dev.c ++++ b/net/core/dev.c +@@ -5403,8 +5403,7 @@ static void skb_gro_reset_offset(struct + NAPI_GRO_CB(skb)->frag0 = NULL; + NAPI_GRO_CB(skb)->frag0_len = 0; + +- if (skb_mac_header(skb) == skb_tail_pointer(skb) && +- pinfo->nr_frags && ++ if (!skb_headlen(skb) && pinfo->nr_frags && + !PageHighMem(skb_frag_page(frag0))) { + NAPI_GRO_CB(skb)->frag0 = skb_frag_address(frag0); + NAPI_GRO_CB(skb)->frag0_len = min_t(unsigned int, diff --git a/target/linux/generic/backport-5.4/701-v5.5-net-core-use-listified-Rx-for-GRO_NORMAL-in-napi_gro.patch b/target/linux/generic/backport-5.4/701-v5.5-net-core-use-listified-Rx-for-GRO_NORMAL-in-napi_gro.patch new file mode 100644 index 0000000000..7be25f5338 --- /dev/null +++ b/target/linux/generic/backport-5.4/701-v5.5-net-core-use-listified-Rx-for-GRO_NORMAL-in-napi_gro.patch @@ -0,0 +1,51 @@ +From: Alexander Lobakin +Date: Mon, 14 Oct 2019 11:00:33 +0300 +Subject: [PATCH] net: core: use listified Rx for GRO_NORMAL in + napi_gro_receive() + +Commit 323ebb61e32b4 ("net: use listified RX for handling GRO_NORMAL +skbs") made use of listified skb processing for the users of +napi_gro_frags(). +The same technique can be used in a way more common napi_gro_receive() +to speed up non-merged (GRO_NORMAL) skbs for a wide range of drivers +including gro_cells and mac80211 users. +This slightly changes the return value in cases where skb is being +dropped by the core stack, but it seems to have no impact on related +drivers' functionality. +gro_normal_batch is left untouched as it's very individual for every +single system configuration and might be tuned in manual order to +achieve an optimal performance. + +Signed-off-by: Alexander Lobakin +Acked-by: Edward Cree +Signed-off-by: David S. Miller +--- + +--- a/net/core/dev.c ++++ b/net/core/dev.c +@@ -5601,12 +5601,13 @@ static void napi_skb_free_stolen_head(st + kmem_cache_free(skbuff_head_cache, skb); + } + +-static gro_result_t napi_skb_finish(gro_result_t ret, struct sk_buff *skb) ++static gro_result_t napi_skb_finish(struct napi_struct *napi, ++ struct sk_buff *skb, ++ gro_result_t ret) + { + switch (ret) { + case GRO_NORMAL: +- if (netif_receive_skb_internal(skb)) +- ret = GRO_DROP; ++ gro_normal_one(napi, skb); + break; + + case GRO_DROP: +@@ -5638,7 +5639,7 @@ gro_result_t napi_gro_receive(struct nap + + skb_gro_reset_offset(skb); + +- ret = napi_skb_finish(dev_gro_receive(napi, skb), skb); ++ ret = napi_skb_finish(napi, skb, dev_gro_receive(napi, skb)); + trace_napi_gro_receive_exit(ret); + + return ret; diff --git a/target/linux/generic/hack-5.4/230-openwrt_lzma_options.patch b/target/linux/generic/hack-5.4/230-openwrt_lzma_options.patch index d4de310a98..809ccbc1e5 100644 --- a/target/linux/generic/hack-5.4/230-openwrt_lzma_options.patch +++ b/target/linux/generic/hack-5.4/230-openwrt_lzma_options.patch @@ -27,11 +27,11 @@ Signed-off-by: Imre Kaloz # --------------------------------------------------------------------------- quiet_cmd_lzma = LZMA $@ -- cmd_lzma = { cat $(real-prereqs) | lzma -9; $(size_append); } > $@ -+ cmd_lzma = { cat $(real-prereqs) | lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so; $(size_append); } > $@ +- cmd_lzma = { cat $(real-prereqs) | $(LZMA) -9; $(size_append); } > $@ ++ cmd_lzma = { cat $(real-prereqs) | $(LZMA) e -d20 -lc1 -lp2 -pb2 -eos -si -so; $(size_append); } > $@ quiet_cmd_lzo = LZO $@ - cmd_lzo = { cat $(real-prereqs) | lzop -9; $(size_append); } > $@ + cmd_lzo = { cat $(real-prereqs) | $(KLZOP) -9; $(size_append); } > $@ --- a/usr/gen_initramfs_list.sh +++ b/usr/gen_initramfs_list.sh @@ -229,7 +229,7 @@ cpio_list= diff --git a/target/linux/generic/hack-5.4/550-loop-Report-EOPNOTSUPP-properly.patch b/target/linux/generic/hack-5.4/550-loop-Report-EOPNOTSUPP-properly.patch index 754c01be1b..0e5447d454 100644 --- a/target/linux/generic/hack-5.4/550-loop-Report-EOPNOTSUPP-properly.patch +++ b/target/linux/generic/hack-5.4/550-loop-Report-EOPNOTSUPP-properly.patch @@ -27,7 +27,7 @@ Reviewed-by: Bart Van Assche goto end_io; } -@@ -1970,7 +1970,10 @@ static void loop_handle_cmd(struct loop_ +@@ -1973,7 +1973,10 @@ static void loop_handle_cmd(struct loop_ failed: /* complete non-aio request */ if (!cmd->use_aio || ret) { diff --git a/target/linux/generic/hack-5.4/902-debloat_proc.patch b/target/linux/generic/hack-5.4/902-debloat_proc.patch index 8813b38da7..e566fd178e 100644 --- a/target/linux/generic/hack-5.4/902-debloat_proc.patch +++ b/target/linux/generic/hack-5.4/902-debloat_proc.patch @@ -235,7 +235,7 @@ Signed-off-by: Felix Fietkau if (!pe) --- a/mm/vmalloc.c +++ b/mm/vmalloc.c -@@ -3562,6 +3562,8 @@ static const struct seq_operations vmall +@@ -3564,6 +3564,8 @@ static const struct seq_operations vmall static int __init proc_vmalloc_init(void) { diff --git a/target/linux/generic/hack-5.4/904-debloat_dma_buf.patch b/target/linux/generic/hack-5.4/904-debloat_dma_buf.patch index ab53b74a76..7c768c6a7e 100644 --- a/target/linux/generic/hack-5.4/904-debloat_dma_buf.patch +++ b/target/linux/generic/hack-5.4/904-debloat_dma_buf.patch @@ -54,7 +54,7 @@ Signed-off-by: Felix Fietkau +MODULE_LICENSE("GPL"); --- a/kernel/sched/core.c +++ b/kernel/sched/core.c -@@ -2679,6 +2679,7 @@ int wake_up_state(struct task_struct *p, +@@ -2756,6 +2756,7 @@ int wake_up_state(struct task_struct *p, { return try_to_wake_up(p, state, 0); } diff --git a/target/linux/generic/pending-5.4/201-extra_optimization.patch b/target/linux/generic/pending-5.4/201-extra_optimization.patch index cbec8ef362..c606487992 100644 --- a/target/linux/generic/pending-5.4/201-extra_optimization.patch +++ b/target/linux/generic/pending-5.4/201-extra_optimization.patch @@ -14,7 +14,7 @@ Signed-off-by: Felix Fietkau --- a/Makefile +++ b/Makefile -@@ -713,11 +713,11 @@ KBUILD_CFLAGS += $(call cc-disable-warni +@@ -719,11 +719,11 @@ KBUILD_CFLAGS += $(call cc-disable-warni KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member) ifdef CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE diff --git a/target/linux/generic/pending-5.4/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch b/target/linux/generic/pending-5.4/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch index 702199242d..8bcca1c4d1 100644 --- a/target/linux/generic/pending-5.4/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch +++ b/target/linux/generic/pending-5.4/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch @@ -293,7 +293,7 @@ Signed-off-by: Steven Barth __skb_tunnel_rx(skb, tunnel->dev, tunnel->net); err = dscp_ecn_decapsulate(tunnel, ipv6h, skb); -@@ -951,6 +1091,7 @@ static void init_tel_txopt(struct ipv6_t +@@ -959,6 +1099,7 @@ static void init_tel_txopt(struct ipv6_t opt->ops.opt_nflen = 8; } @@ -301,7 +301,7 @@ Signed-off-by: Steven Barth /** * ip6_tnl_addr_conflict - compare packet addresses to tunnel's own * @t: the outgoing tunnel device -@@ -1303,6 +1444,7 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str +@@ -1311,6 +1452,7 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str { struct ip6_tnl *t = netdev_priv(dev); struct ipv6hdr *ipv6h; @@ -309,7 +309,7 @@ Signed-off-by: Steven Barth int encap_limit = -1; __u16 offset; struct flowi6 fl6; -@@ -1368,6 +1510,18 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str +@@ -1376,6 +1518,18 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str fl6.flowi6_uid = sock_net_uid(dev_net(dev), NULL); dsfield = INET_ECN_encapsulate(dsfield, ipv6_get_dsfield(ipv6h)); @@ -328,7 +328,7 @@ Signed-off-by: Steven Barth if (iptunnel_handle_offloads(skb, SKB_GSO_IPXIP6)) return -1; -@@ -1497,6 +1651,14 @@ ip6_tnl_change(struct ip6_tnl *t, const +@@ -1505,6 +1659,14 @@ ip6_tnl_change(struct ip6_tnl *t, const t->parms.link = p->link; t->parms.proto = p->proto; t->parms.fwmark = p->fwmark; @@ -343,7 +343,7 @@ Signed-off-by: Steven Barth dst_cache_reset(&t->dst_cache); ip6_tnl_link_config(t); return 0; -@@ -1535,6 +1697,7 @@ ip6_tnl_parm_from_user(struct __ip6_tnl_ +@@ -1543,6 +1705,7 @@ ip6_tnl_parm_from_user(struct __ip6_tnl_ p->flowinfo = u->flowinfo; p->link = u->link; p->proto = u->proto; @@ -351,7 +351,7 @@ Signed-off-by: Steven Barth memcpy(p->name, u->name, sizeof(u->name)); } -@@ -1919,6 +2082,15 @@ static int ip6_tnl_validate(struct nlatt +@@ -1927,6 +2090,15 @@ static int ip6_tnl_validate(struct nlatt return 0; } @@ -367,7 +367,7 @@ Signed-off-by: Steven Barth static void ip6_tnl_netlink_parms(struct nlattr *data[], struct __ip6_tnl_parm *parms) { -@@ -1956,6 +2128,46 @@ static void ip6_tnl_netlink_parms(struct +@@ -1964,6 +2136,46 @@ static void ip6_tnl_netlink_parms(struct if (data[IFLA_IPTUN_FWMARK]) parms->fwmark = nla_get_u32(data[IFLA_IPTUN_FWMARK]); @@ -414,7 +414,7 @@ Signed-off-by: Steven Barth } static bool ip6_tnl_netlink_encap_parms(struct nlattr *data[], -@@ -2071,6 +2283,12 @@ static void ip6_tnl_dellink(struct net_d +@@ -2079,6 +2291,12 @@ static void ip6_tnl_dellink(struct net_d static size_t ip6_tnl_get_size(const struct net_device *dev) { @@ -427,7 +427,7 @@ Signed-off-by: Steven Barth return /* IFLA_IPTUN_LINK */ nla_total_size(4) + -@@ -2100,6 +2318,24 @@ static size_t ip6_tnl_get_size(const str +@@ -2108,6 +2326,24 @@ static size_t ip6_tnl_get_size(const str nla_total_size(0) + /* IFLA_IPTUN_FWMARK */ nla_total_size(4) + @@ -452,7 +452,7 @@ Signed-off-by: Steven Barth 0; } -@@ -2107,6 +2343,9 @@ static int ip6_tnl_fill_info(struct sk_b +@@ -2115,6 +2351,9 @@ static int ip6_tnl_fill_info(struct sk_b { struct ip6_tnl *tunnel = netdev_priv(dev); struct __ip6_tnl_parm *parm = &tunnel->parms; @@ -462,7 +462,7 @@ Signed-off-by: Steven Barth if (nla_put_u32(skb, IFLA_IPTUN_LINK, parm->link) || nla_put_in6_addr(skb, IFLA_IPTUN_LOCAL, &parm->laddr) || -@@ -2116,9 +2355,27 @@ static int ip6_tnl_fill_info(struct sk_b +@@ -2124,9 +2363,27 @@ static int ip6_tnl_fill_info(struct sk_b nla_put_be32(skb, IFLA_IPTUN_FLOWINFO, parm->flowinfo) || nla_put_u32(skb, IFLA_IPTUN_FLAGS, parm->flags) || nla_put_u8(skb, IFLA_IPTUN_PROTO, parm->proto) || @@ -491,7 +491,7 @@ Signed-off-by: Steven Barth if (nla_put_u16(skb, IFLA_IPTUN_ENCAP_TYPE, tunnel->encap.type) || nla_put_be16(skb, IFLA_IPTUN_ENCAP_SPORT, tunnel->encap.sport) || nla_put_be16(skb, IFLA_IPTUN_ENCAP_DPORT, tunnel->encap.dport) || -@@ -2158,6 +2415,7 @@ static const struct nla_policy ip6_tnl_p +@@ -2166,6 +2423,7 @@ static const struct nla_policy ip6_tnl_p [IFLA_IPTUN_ENCAP_DPORT] = { .type = NLA_U16 }, [IFLA_IPTUN_COLLECT_METADATA] = { .type = NLA_FLAG }, [IFLA_IPTUN_FWMARK] = { .type = NLA_U32 }, diff --git a/target/linux/generic/pending-5.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch b/target/linux/generic/pending-5.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch index 5acadeceb1..5ba7f3e693 100644 --- a/target/linux/generic/pending-5.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch +++ b/target/linux/generic/pending-5.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch @@ -32,7 +32,7 @@ Signed-off-by: Felix Fietkau __u16 tc_index; /* traffic control index */ --- a/net/core/dev.c +++ b/net/core/dev.c -@@ -5469,6 +5469,9 @@ static enum gro_result dev_gro_receive(s +@@ -5468,6 +5468,9 @@ static enum gro_result dev_gro_receive(s int same_flow; int grow; diff --git a/target/linux/ipq806x/patches-5.4/093-1-v5.8-ipq806x-PCI-qcom-Add-missing-ipq806x-clocks-in-PCIe-driver.patch b/target/linux/ipq806x/patches-5.4/093-1-v5.8-ipq806x-PCI-qcom-Add-missing-ipq806x-clocks-in-PCIe-driver.patch deleted file mode 100644 index 6098cb8fe0..0000000000 --- a/target/linux/ipq806x/patches-5.4/093-1-v5.8-ipq806x-PCI-qcom-Add-missing-ipq806x-clocks-in-PCIe-driver.patch +++ /dev/null @@ -1,103 +0,0 @@ -From 8b6f0330b5f9a7543356bfa9e76d580f03aa2c1e Mon Sep 17 00:00:00 2001 -From: Ansuel Smith -Date: Mon, 15 Jun 2020 23:05:57 +0200 -Subject: PCI: qcom: Add missing ipq806x clocks in PCIe driver - -Aux and Ref clk are missing in PCIe qcom driver. Add support for this -optional clks for ipq8064/apq8064 SoC. - -Link: https://lore.kernel.org/r/20200615210608.21469-2-ansuelsmth@gmail.com -Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") -Signed-off-by: Sham Muthayyan -Signed-off-by: Ansuel Smith -Signed-off-by: Lorenzo Pieralisi -Reviewed-by: Rob Herring -Acked-by: Stanimir Varbanov ---- - drivers/pci/controller/dwc/pcie-qcom.c | 38 +++++++++++++++++++++++++++++----- - 1 file changed, 33 insertions(+), 5 deletions(-) - ---- a/drivers/pci/controller/dwc/pcie-qcom.c -+++ b/drivers/pci/controller/dwc/pcie-qcom.c -@@ -103,6 +103,8 @@ struct qcom_pcie_resources_2_1_0 { - struct clk *iface_clk; - struct clk *core_clk; - struct clk *phy_clk; -+ struct clk *aux_clk; -+ struct clk *ref_clk; - struct reset_control *pci_reset; - struct reset_control *axi_reset; - struct reset_control *ahb_reset; -@@ -253,6 +255,14 @@ static int qcom_pcie_get_resources_2_1_0 - if (IS_ERR(res->phy_clk)) - return PTR_ERR(res->phy_clk); - -+ res->aux_clk = devm_clk_get_optional(dev, "aux"); -+ if (IS_ERR(res->aux_clk)) -+ return PTR_ERR(res->aux_clk); -+ -+ res->ref_clk = devm_clk_get_optional(dev, "ref"); -+ if (IS_ERR(res->ref_clk)) -+ return PTR_ERR(res->ref_clk); -+ - res->pci_reset = devm_reset_control_get_exclusive(dev, "pci"); - if (IS_ERR(res->pci_reset)) - return PTR_ERR(res->pci_reset); -@@ -285,6 +295,8 @@ static void qcom_pcie_deinit_2_1_0(struc - clk_disable_unprepare(res->iface_clk); - clk_disable_unprepare(res->core_clk); - clk_disable_unprepare(res->phy_clk); -+ clk_disable_unprepare(res->aux_clk); -+ clk_disable_unprepare(res->ref_clk); - regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); - } - -@@ -315,16 +327,28 @@ static int qcom_pcie_init_2_1_0(struct q - goto err_assert_ahb; - } - -+ ret = clk_prepare_enable(res->core_clk); -+ if (ret) { -+ dev_err(dev, "cannot prepare/enable core clock\n"); -+ goto err_clk_core; -+ } -+ - ret = clk_prepare_enable(res->phy_clk); - if (ret) { - dev_err(dev, "cannot prepare/enable phy clock\n"); - goto err_clk_phy; - } - -- ret = clk_prepare_enable(res->core_clk); -+ ret = clk_prepare_enable(res->aux_clk); - if (ret) { -- dev_err(dev, "cannot prepare/enable core clock\n"); -- goto err_clk_core; -+ dev_err(dev, "cannot prepare/enable aux clock\n"); -+ goto err_clk_aux; -+ } -+ -+ ret = clk_prepare_enable(res->ref_clk); -+ if (ret) { -+ dev_err(dev, "cannot prepare/enable ref clock\n"); -+ goto err_clk_ref; - } - - ret = reset_control_deassert(res->ahb_reset); -@@ -400,10 +424,14 @@ static int qcom_pcie_init_2_1_0(struct q - return 0; - - err_deassert_ahb: -- clk_disable_unprepare(res->core_clk); --err_clk_core: -+ clk_disable_unprepare(res->ref_clk); -+err_clk_ref: -+ clk_disable_unprepare(res->aux_clk); -+err_clk_aux: - clk_disable_unprepare(res->phy_clk); - err_clk_phy: -+ clk_disable_unprepare(res->core_clk); -+err_clk_core: - clk_disable_unprepare(res->iface_clk); - err_assert_ahb: - regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); diff --git a/target/linux/ipq806x/patches-5.4/093-2-v5.8-ipq806x-PCI-qcom-Change-duplicate-PCI-reset-to-phy-reset.patch b/target/linux/ipq806x/patches-5.4/093-2-v5.8-ipq806x-PCI-qcom-Change-duplicate-PCI-reset-to-phy-reset.patch deleted file mode 100644 index 9600419710..0000000000 --- a/target/linux/ipq806x/patches-5.4/093-2-v5.8-ipq806x-PCI-qcom-Change-duplicate-PCI-reset-to-phy-reset.patch +++ /dev/null @@ -1,72 +0,0 @@ -From dd58318c019f10bc94db36df66af6c55d4c0cbba Mon Sep 17 00:00:00 2001 -From: Abhishek Sahu -Date: Mon, 15 Jun 2020 23:05:59 +0200 -Subject: PCI: qcom: Change duplicate PCI reset to phy reset - -The deinit issues reset_control_assert for PCI twice and does not contain -phy reset. - -Link: https://lore.kernel.org/r/20200615210608.21469-4-ansuelsmth@gmail.com -Signed-off-by: Abhishek Sahu -Signed-off-by: Ansuel Smith -Signed-off-by: Lorenzo Pieralisi -Reviewed-by: Rob Herring -Acked-by: Stanimir Varbanov ---- - drivers/pci/controller/dwc/pcie-qcom.c | 18 ++++++++---------- - 1 file changed, 8 insertions(+), 10 deletions(-) - ---- a/drivers/pci/controller/dwc/pcie-qcom.c -+++ b/drivers/pci/controller/dwc/pcie-qcom.c -@@ -287,14 +287,14 @@ static void qcom_pcie_deinit_2_1_0(struc - { - struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0; - -+ clk_disable_unprepare(res->phy_clk); - reset_control_assert(res->pci_reset); - reset_control_assert(res->axi_reset); - reset_control_assert(res->ahb_reset); - reset_control_assert(res->por_reset); -- reset_control_assert(res->pci_reset); -+ reset_control_assert(res->phy_reset); - clk_disable_unprepare(res->iface_clk); - clk_disable_unprepare(res->core_clk); -- clk_disable_unprepare(res->phy_clk); - clk_disable_unprepare(res->aux_clk); - clk_disable_unprepare(res->ref_clk); - regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); -@@ -333,12 +333,6 @@ static int qcom_pcie_init_2_1_0(struct q - goto err_clk_core; - } - -- ret = clk_prepare_enable(res->phy_clk); -- if (ret) { -- dev_err(dev, "cannot prepare/enable phy clock\n"); -- goto err_clk_phy; -- } -- - ret = clk_prepare_enable(res->aux_clk); - if (ret) { - dev_err(dev, "cannot prepare/enable aux clock\n"); -@@ -411,6 +405,12 @@ static int qcom_pcie_init_2_1_0(struct q - return ret; - } - -+ ret = clk_prepare_enable(res->phy_clk); -+ if (ret) { -+ dev_err(dev, "cannot prepare/enable phy clock\n"); -+ goto err_deassert_ahb; -+ } -+ - /* wait for clock acquisition */ - usleep_range(1000, 1500); - -@@ -428,8 +428,6 @@ err_deassert_ahb: - err_clk_ref: - clk_disable_unprepare(res->aux_clk); - err_clk_aux: -- clk_disable_unprepare(res->phy_clk); --err_clk_phy: - clk_disable_unprepare(res->core_clk); - err_clk_core: - clk_disable_unprepare(res->iface_clk); diff --git a/target/linux/ipq806x/patches-5.4/093-3-v5.8-ipq806x-PCI-qcom-Add-missing-reset-for-ipq806x.patch b/target/linux/ipq806x/patches-5.4/093-3-v5.8-ipq806x-PCI-qcom-Add-missing-reset-for-ipq806x.patch deleted file mode 100644 index fe31e55de3..0000000000 --- a/target/linux/ipq806x/patches-5.4/093-3-v5.8-ipq806x-PCI-qcom-Add-missing-reset-for-ipq806x.patch +++ /dev/null @@ -1,62 +0,0 @@ -From ee367e2cdd2202b5714982739e684543cd2cee0e Mon Sep 17 00:00:00 2001 -From: Ansuel Smith -Date: Mon, 15 Jun 2020 23:06:00 +0200 -Subject: PCI: qcom: Add missing reset for ipq806x - -Add missing ext reset used by ipq8064 SoC in PCIe qcom driver. - -Link: https://lore.kernel.org/r/20200615210608.21469-5-ansuelsmth@gmail.com -Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") -Signed-off-by: Sham Muthayyan -Signed-off-by: Ansuel Smith -Signed-off-by: Lorenzo Pieralisi -Reviewed-by: Rob Herring -Reviewed-by: Philipp Zabel -Acked-by: Stanimir Varbanov -Cc: stable@vger.kernel.org # v4.5+ ---- - drivers/pci/controller/dwc/pcie-qcom.c | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - ---- a/drivers/pci/controller/dwc/pcie-qcom.c -+++ b/drivers/pci/controller/dwc/pcie-qcom.c -@@ -110,6 +110,7 @@ struct qcom_pcie_resources_2_1_0 { - struct reset_control *ahb_reset; - struct reset_control *por_reset; - struct reset_control *phy_reset; -+ struct reset_control *ext_reset; - struct regulator_bulk_data supplies[QCOM_PCIE_2_1_0_MAX_SUPPLY]; - }; - -@@ -279,6 +280,10 @@ static int qcom_pcie_get_resources_2_1_0 - if (IS_ERR(res->por_reset)) - return PTR_ERR(res->por_reset); - -+ res->ext_reset = devm_reset_control_get_optional_exclusive(dev, "ext"); -+ if (IS_ERR(res->ext_reset)) -+ return PTR_ERR(res->ext_reset); -+ - res->phy_reset = devm_reset_control_get_exclusive(dev, "phy"); - return PTR_ERR_OR_ZERO(res->phy_reset); - } -@@ -292,6 +297,7 @@ static void qcom_pcie_deinit_2_1_0(struc - reset_control_assert(res->axi_reset); - reset_control_assert(res->ahb_reset); - reset_control_assert(res->por_reset); -+ reset_control_assert(res->ext_reset); - reset_control_assert(res->phy_reset); - clk_disable_unprepare(res->iface_clk); - clk_disable_unprepare(res->core_clk); -@@ -351,6 +357,12 @@ static int qcom_pcie_init_2_1_0(struct q - goto err_deassert_ahb; - } - -+ ret = reset_control_deassert(res->ext_reset); -+ if (ret) { -+ dev_err(dev, "cannot deassert ext reset\n"); -+ goto err_deassert_ahb; -+ } -+ - /* enable PCIe clocks and resets */ - val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); - val &= ~BIT(0); diff --git a/target/linux/layerscape/patches-5.4/701-net-0408-sdk_fman-fix-CONFIG_COMPAT-leak-during-headers-insta.patch b/target/linux/layerscape/patches-5.4/701-net-0408-sdk_fman-fix-CONFIG_COMPAT-leak-during-headers-insta.patch index 209b0347c9..bff431c52d 100644 --- a/target/linux/layerscape/patches-5.4/701-net-0408-sdk_fman-fix-CONFIG_COMPAT-leak-during-headers-insta.patch +++ b/target/linux/layerscape/patches-5.4/701-net-0408-sdk_fman-fix-CONFIG_COMPAT-leak-during-headers-insta.patch @@ -15,8 +15,6 @@ Signed-off-by: Yangbo Lu .../uapi/linux/fmd/Peripherals/fm_test_ioctls.h | 4 +- 5 files changed, 58 insertions(+), 53 deletions(-) -diff --git a/drivers/net/ethernet/freescale/sdk_fman/ncsw_config.mk b/drivers/net/ethernet/freescale/sdk_fman/ncsw_config.mk -index 586f9c7..99a0b73 100644 --- a/drivers/net/ethernet/freescale/sdk_fman/ncsw_config.mk +++ b/drivers/net/ethernet/freescale/sdk_fman/ncsw_config.mk @@ -44,6 +44,11 @@ ifdef CONFIG_FMAN_ARM @@ -31,11 +29,9 @@ index 586f9c7..99a0b73 100644 ccflags-y += -I$(FMAN)/src/inc ccflags-y += -I$(FMAN)/src/inc/system ccflags-y += -I$(FMAN)/src/inc/wrapper -diff --git a/include/uapi/linux/fmd/Peripherals/fm_ioctls.h b/include/uapi/linux/fmd/Peripherals/fm_ioctls.h -index e0c2dd3..ff9e66b6 100644 --- a/include/uapi/linux/fmd/Peripherals/fm_ioctls.h +++ b/include/uapi/linux/fmd/Peripherals/fm_ioctls.h -@@ -434,7 +434,7 @@ typedef struct ioc_fm_ctrl_mon_counters_params_t { +@@ -434,7 +434,7 @@ typedef struct ioc_fm_ctrl_mon_counters_ @Retval Handle to FM VSP object, or NULL for Failure. *//***************************************************************************/ @@ -44,7 +40,7 @@ index e0c2dd3..ff9e66b6 100644 #define FM_IOC_VSP_CONFIG_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_IOC_NUM(8), ioc_compat_fm_vsp_params_t) #endif #define FM_IOC_VSP_CONFIG _IOWR(FM_IOC_TYPE_BASE, FM_IOC_NUM(8), ioc_fm_vsp_params_t) -@@ -448,7 +448,7 @@ typedef struct ioc_fm_ctrl_mon_counters_params_t { +@@ -448,7 +448,7 @@ typedef struct ioc_fm_ctrl_mon_counters_ @Return E_OK on success; Error code otherwise. *//***************************************************************************/ @@ -53,7 +49,7 @@ index e0c2dd3..ff9e66b6 100644 #define FM_IOC_VSP_INIT_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(9), ioc_compat_fm_obj_t) #endif #define FM_IOC_VSP_INIT _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(9), ioc_fm_obj_t) -@@ -464,7 +464,7 @@ typedef struct ioc_fm_ctrl_mon_counters_params_t { +@@ -464,7 +464,7 @@ typedef struct ioc_fm_ctrl_mon_counters_ @Return E_OK on success; Error code otherwise. *//***************************************************************************/ @@ -62,7 +58,7 @@ index e0c2dd3..ff9e66b6 100644 #define FM_IOC_VSP_FREE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(10), ioc_compat_fm_obj_t) #endif #define FM_IOC_VSP_FREE _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(10), ioc_fm_obj_t) -@@ -482,7 +482,7 @@ typedef struct ioc_fm_ctrl_mon_counters_params_t { +@@ -482,7 +482,7 @@ typedef struct ioc_fm_ctrl_mon_counters_ @Cautions Allowed only following FM_VSP_Config() and before FM_VSP_Init(). *//***************************************************************************/ @@ -71,7 +67,7 @@ index e0c2dd3..ff9e66b6 100644 #define FM_IOC_VSP_CONFIG_POOL_DEPLETION_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(11), ioc_compat_fm_buf_pool_depletion_params_t) #endif #define FM_IOC_VSP_CONFIG_POOL_DEPLETION _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(11), ioc_fm_buf_pool_depletion_params_t) -@@ -512,7 +512,7 @@ typedef struct ioc_fm_ctrl_mon_counters_params_t { +@@ -512,7 +512,7 @@ typedef struct ioc_fm_ctrl_mon_counters_ @Cautions Allowed only following FM_VSP_Config() and before FM_VSP_Init(). *//***************************************************************************/ @@ -80,7 +76,7 @@ index e0c2dd3..ff9e66b6 100644 #define FM_IOC_VSP_CONFIG_BUFFER_PREFIX_CONTENT_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(12), ioc_compat_fm_buffer_prefix_content_params_t) #endif #define FM_IOC_VSP_CONFIG_BUFFER_PREFIX_CONTENT _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(12), ioc_fm_buffer_prefix_content_params_t) -@@ -530,7 +530,7 @@ typedef struct ioc_fm_ctrl_mon_counters_params_t { +@@ -530,7 +530,7 @@ typedef struct ioc_fm_ctrl_mon_counters_ @Cautions Allowed only following FM_VSP_Config() and before FM_VSP_Init(). *//***************************************************************************/ @@ -89,7 +85,7 @@ index e0c2dd3..ff9e66b6 100644 #define FM_IOC_VSP_CONFIG_NO_SG_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(13), ioc_compat_fm_vsp_config_no_sg_params_t) #endif #define FM_IOC_VSP_CONFIG_NO_SG _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(13), ioc_fm_vsp_config_no_sg_params_t) -@@ -554,7 +554,7 @@ typedef struct ioc_fm_ctrl_mon_counters_params_t { +@@ -554,7 +554,7 @@ typedef struct ioc_fm_ctrl_mon_counters_ @Cautions Allowed only following FM_VSP_Init(). *//***************************************************************************/ @@ -98,7 +94,7 @@ index e0c2dd3..ff9e66b6 100644 #define FM_IOC_VSP_GET_BUFFER_PRS_RESULT_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_IOC_NUM(14), ioc_compat_fm_vsp_prs_result_params_t) #endif #define FM_IOC_VSP_GET_BUFFER_PRS_RESULT _IOWR(FM_IOC_TYPE_BASE, FM_IOC_NUM(14), ioc_fm_vsp_prs_result_params_t) -@@ -612,7 +612,7 @@ typedef struct ioc_fm_ctrl_mon_counters_params_t { +@@ -612,7 +612,7 @@ typedef struct ioc_fm_ctrl_mon_counters_ @Cautions Allowed only following FM_Init(). *//***************************************************************************/ @@ -107,11 +103,9 @@ index e0c2dd3..ff9e66b6 100644 #define FM_IOC_CTRL_MON_GET_COUNTERS_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(17), ioc_compat_fm_ctrl_mon_counters_params_t) #endif #define FM_IOC_CTRL_MON_GET_COUNTERS _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(17), ioc_fm_ctrl_mon_counters_params_t) -diff --git a/include/uapi/linux/fmd/Peripherals/fm_pcd_ioctls.h b/include/uapi/linux/fmd/Peripherals/fm_pcd_ioctls.h -index d13e878..0606e80 100644 --- a/include/uapi/linux/fmd/Peripherals/fm_pcd_ioctls.h +++ b/include/uapi/linux/fmd/Peripherals/fm_pcd_ioctls.h -@@ -312,7 +312,7 @@ typedef struct ioc_fm_pcd_kg_dflt_value_params_t { +@@ -312,7 +312,7 @@ typedef struct ioc_fm_pcd_kg_dflt_value_ @Cautions Allowed only when PCD is disabled. *//***************************************************************************/ @@ -120,7 +114,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_PRS_LOAD_SW_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(3), ioc_compat_fm_pcd_prs_sw_params_t) #endif #define FM_PCD_IOC_PRS_LOAD_SW _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(3), ioc_fm_pcd_prs_sw_params_t) -@@ -385,7 +385,7 @@ typedef struct ioc_fm_pcd_kg_dflt_value_params_t { +@@ -385,7 +385,7 @@ typedef struct ioc_fm_pcd_kg_dflt_value_ @Cautions Allowed only following FM_PCD_Init() & FM_PCD_KgSchemeSet(). *//***************************************************************************/ @@ -129,7 +123,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_KG_SCHEME_GET_CNTR_COMPAT _IOR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(4), ioc_compat_fm_pcd_kg_scheme_spc_t) #endif #define FM_PCD_IOC_KG_SCHEME_GET_CNTR _IOR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(4), ioc_fm_pcd_kg_scheme_spc_t) -@@ -2413,7 +2413,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2413,7 +2413,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Cautions Allowed only following FM_PCD_MatchTableSet(). *//***************************************************************************/ @@ -138,7 +132,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_MATCH_TABLE_GET_KEY_STAT_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(12), ioc_compat_fm_pcd_cc_tbl_get_stats_t) #endif #define FM_PCD_IOC_MATCH_TABLE_GET_KEY_STAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(12), ioc_fm_pcd_cc_tbl_get_stats_t) -@@ -2439,7 +2439,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2439,7 +2439,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Cautions Allowed only following FM_PCD_MatchTableSet(). *//***************************************************************************/ @@ -147,7 +141,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_MATCH_TABLE_GET_MISS_STAT_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(13), ioc_compat_fm_pcd_cc_tbl_get_stats_t) #endif #define FM_PCD_IOC_MATCH_TABLE_GET_MISS_STAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(13), ioc_fm_pcd_cc_tbl_get_stats_t) -@@ -2463,7 +2463,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2463,7 +2463,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Cautions Allowed only following FM_PCD_HashTableSet(). *//***************************************************************************/ @@ -156,7 +150,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_HASH_TABLE_GET_MISS_STAT_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(14), ioc_compat_fm_pcd_cc_tbl_get_stats_t) #endif #define FM_PCD_IOC_HASH_TABLE_GET_MISS_STAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(14), ioc_fm_pcd_cc_tbl_get_stats_t) -@@ -2511,7 +2511,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2511,7 +2511,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Return 0 on success; Error code otherwise. *//***************************************************************************/ @@ -165,7 +159,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_NET_ENV_CHARACTERISTICS_SET_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(20), ioc_compat_fm_pcd_net_env_params_t) #endif #define FM_PCD_IOC_NET_ENV_CHARACTERISTICS_SET _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(20), ioc_fm_pcd_net_env_params_t) -@@ -2525,7 +2525,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2525,7 +2525,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Return 0 on success; Error code otherwise. *//***************************************************************************/ @@ -174,7 +168,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_NET_ENV_CHARACTERISTICS_DELETE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(21), ioc_compat_fm_obj_t) #endif #define FM_PCD_IOC_NET_ENV_CHARACTERISTICS_DELETE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(21), ioc_fm_obj_t) -@@ -2544,7 +2544,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2544,7 +2544,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Return 0 on success; Error code otherwise. *//***************************************************************************/ @@ -183,7 +177,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_KG_SCHEME_SET_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(24), ioc_compat_fm_pcd_kg_scheme_params_t) #endif #define FM_PCD_IOC_KG_SCHEME_SET _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(24), ioc_fm_pcd_kg_scheme_params_t) -@@ -2558,7 +2558,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2558,7 +2558,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Return 0 on success; Error code otherwise. *//***************************************************************************/ @@ -192,7 +186,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_KG_SCHEME_DELETE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(25), ioc_compat_fm_obj_t) #endif #define FM_PCD_IOC_KG_SCHEME_DELETE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(25), ioc_fm_obj_t) -@@ -2575,7 +2575,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2575,7 +2575,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Return 0 on success; Error code otherwise. *//***************************************************************************/ @@ -201,7 +195,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_CC_ROOT_BUILD_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(26), compat_uptr_t) #endif #define FM_PCD_IOC_CC_ROOT_BUILD _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(26), void *) /* workaround ...*/ -@@ -2587,7 +2587,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2587,7 +2587,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Param[in] ioc_fm_obj_t - The id of a CC tree. *//***************************************************************************/ @@ -210,7 +204,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_CC_ROOT_DELETE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(27), ioc_compat_fm_obj_t) #endif #define FM_PCD_IOC_CC_ROOT_DELETE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(27), ioc_fm_obj_t) -@@ -2604,7 +2604,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2604,7 +2604,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Return 0 on success; Error code otherwise. *//***************************************************************************/ @@ -219,7 +213,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_MATCH_TABLE_SET_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(28), compat_uptr_t) #endif #define FM_PCD_IOC_MATCH_TABLE_SET _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(28), void *) /* workaround ...*/ -@@ -2618,7 +2618,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2618,7 +2618,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Return 0 on success; Error code otherwise. *//***************************************************************************/ @@ -228,7 +222,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_MATCH_TABLE_DELETE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(29), ioc_compat_fm_obj_t) #endif #define FM_PCD_IOC_MATCH_TABLE_DELETE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(29), ioc_fm_obj_t) -@@ -2634,7 +2634,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2634,7 +2634,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Cautions Allowed only following FM_PCD_CcRootBuild(). *//***************************************************************************/ @@ -237,7 +231,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_CC_ROOT_MODIFY_NEXT_ENGINE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(30), ioc_compat_fm_pcd_cc_tree_modify_next_engine_params_t) #endif #define FM_PCD_IOC_CC_ROOT_MODIFY_NEXT_ENGINE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(30), ioc_fm_pcd_cc_tree_modify_next_engine_params_t) -@@ -2650,7 +2650,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2650,7 +2650,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Cautions Allowed only following FM_PCD_MatchTableSet(). *//***************************************************************************/ @@ -246,7 +240,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_MATCH_TABLE_MODIFY_NEXT_ENGINE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(31), ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t) #endif #define FM_PCD_IOC_MATCH_TABLE_MODIFY_NEXT_ENGINE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(31), ioc_fm_pcd_cc_node_modify_next_engine_params_t) -@@ -2666,7 +2666,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2666,7 +2666,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Cautions Allowed only following FM_PCD_MatchTableSet(). *//***************************************************************************/ @@ -255,7 +249,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_MATCH_TABLE_MODIFY_MISS_NEXT_ENGINE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(32), ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t) #endif #define FM_PCD_IOC_MATCH_TABLE_MODIFY_MISS_NEXT_ENGINE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(32), ioc_fm_pcd_cc_node_modify_next_engine_params_t) -@@ -2684,7 +2684,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2684,7 +2684,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Cautions Allowed only after FM_PCD_MatchTableSet() has been called for this node and for all of the nodes that lead to it. *//***************************************************************************/ @@ -264,7 +258,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_MATCH_TABLE_REMOVE_KEY_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(33), ioc_compat_fm_pcd_cc_node_remove_key_params_t) #endif #define FM_PCD_IOC_MATCH_TABLE_REMOVE_KEY _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(33), ioc_fm_pcd_cc_node_remove_key_params_t) -@@ -2705,7 +2705,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2705,7 +2705,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Cautions Allowed only after FM_PCD_MatchTableSet() has been called for this node and for all of the nodes that lead to it. *//***************************************************************************/ @@ -273,7 +267,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_MATCH_TABLE_ADD_KEY_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(34), ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t) #endif #define FM_PCD_IOC_MATCH_TABLE_ADD_KEY _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(34), ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t) -@@ -2722,7 +2722,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2722,7 +2722,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Cautions Allowed only following FM_PCD_MatchTableSet() not only of the relevnt node but also the node that points to this node *//***************************************************************************/ @@ -282,7 +276,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY_AND_NEXT_ENGINE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(35), ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t) #endif #define FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY_AND_NEXT_ENGINE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(35), ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t) -@@ -2739,7 +2739,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2739,7 +2739,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Cautions Allowed only after FM_PCD_MatchTableSet() has been called for this node and for all of the nodes that lead to it. *//***************************************************************************/ @@ -291,7 +285,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(36), ioc_compat_fm_pcd_cc_node_modify_key_params_t) #endif #define FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(36), ioc_fm_pcd_cc_node_modify_key_params_t) -@@ -2766,7 +2766,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2766,7 +2766,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Return 0 on success; Error code otherwise. *//***************************************************************************/ @@ -300,7 +294,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_HASH_TABLE_SET_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(37), ioc_compat_fm_pcd_hash_table_params_t) #endif #define FM_PCD_IOC_HASH_TABLE_SET _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(37), ioc_fm_pcd_hash_table_params_t) -@@ -2784,7 +2784,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2784,7 +2784,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Cautions Allowed only following FM_PCD_HashTableSet(). *//***************************************************************************/ @@ -309,7 +303,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_HASH_TABLE_DELETE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(37), ioc_compat_fm_obj_t) #endif #define FM_PCD_IOC_HASH_TABLE_DELETE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(37), ioc_fm_obj_t) -@@ -2803,7 +2803,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2803,7 +2803,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Cautions Allowed only following FM_PCD_HashTableSet(). *//***************************************************************************/ @@ -318,7 +312,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_HASH_TABLE_ADD_KEY_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(39), ioc_compat_fm_pcd_hash_table_add_key_params_t) #endif #define FM_PCD_IOC_HASH_TABLE_ADD_KEY _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(39), ioc_fm_pcd_hash_table_add_key_params_t) -@@ -2820,7 +2820,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2820,7 +2820,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Cautions Allowed only following FM_PCD_HashTableSet(). *//***************************************************************************/ @@ -327,7 +321,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_HASH_TABLE_REMOVE_KEY_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(40), ioc_compat_fm_pcd_hash_table_remove_key_params_t) #endif #define FM_PCD_IOC_HASH_TABLE_REMOVE_KEY _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(40), ioc_fm_pcd_hash_table_remove_key_params_t) -@@ -2836,7 +2836,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2836,7 +2836,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Return 0 on success; Error code otherwise. *//***************************************************************************/ @@ -336,7 +330,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_PLCR_PROFILE_SET_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(41), ioc_compat_fm_pcd_plcr_profile_params_t) #endif #define FM_PCD_IOC_PLCR_PROFILE_SET _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(41), ioc_fm_pcd_plcr_profile_params_t) -@@ -2851,7 +2851,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2851,7 +2851,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Return 0 on success; Error code otherwise. *//***************************************************************************/ @@ -345,7 +339,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_PLCR_PROFILE_DELETE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(41), ioc_compat_fm_obj_t) #endif #define FM_PCD_IOC_PLCR_PROFILE_DELETE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(41), ioc_fm_obj_t) -@@ -2867,7 +2867,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2867,7 +2867,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Return A handle to the initialized object on success; NULL code otherwise. *//***************************************************************************/ @@ -354,7 +348,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_MANIP_NODE_SET_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(43), ioc_compat_fm_pcd_manip_params_t) #endif #define FM_PCD_IOC_MANIP_NODE_SET _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(43), ioc_fm_pcd_manip_params_t) -@@ -2887,7 +2887,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2887,7 +2887,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Cautions Allowed only following FM_PCD_ManipNodeSet(). *//***************************************************************************/ @@ -363,7 +357,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_MANIP_NODE_REPLACE_COMPAT FM_PCD_IOC_MANIP_NODE_SET_COMPAT #endif #define FM_PCD_IOC_MANIP_NODE_REPLACE FM_PCD_IOC_MANIP_NODE_SET -@@ -2903,7 +2903,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2903,7 +2903,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Cautions Allowed only following FM_PCD_ManipNodeSet(). *//***************************************************************************/ @@ -372,7 +366,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_MANIP_NODE_DELETE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(44), ioc_compat_fm_obj_t) #endif #define FM_PCD_IOC_MANIP_NODE_DELETE _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(44), ioc_fm_obj_t) -@@ -2920,7 +2920,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2920,7 +2920,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Cautions Allowed only following FM_PCD_ManipNodeSet(). *//***************************************************************************/ @@ -381,7 +375,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_MANIP_GET_STATS_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(50), ioc_compat_fm_pcd_manip_get_stats_t) #endif #define FM_PCD_IOC_MANIP_GET_STATS _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(50), ioc_fm_pcd_manip_get_stats_t) -@@ -2953,7 +2953,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2953,7 +2953,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Cautions Allowed only following FM_PCD_Init(). *//***************************************************************************/ @@ -390,7 +384,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_FRM_REPLIC_GROUP_SET_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(46), ioc_compat_fm_pcd_frm_replic_group_params_t) #endif #define FM_PCD_IOC_FRM_REPLIC_GROUP_SET _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(46), ioc_fm_pcd_frm_replic_group_params_t) -@@ -2969,7 +2969,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2969,7 +2969,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Cautions Allowed only following FM_PCD_FrmReplicSetGroup(). *//***************************************************************************/ @@ -399,7 +393,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_FRM_REPLIC_GROUP_DELETE_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(47), ioc_compat_fm_obj_t) #endif #define FM_PCD_IOC_FRM_REPLIC_GROUP_DELETE _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(47), ioc_fm_obj_t) -@@ -2987,7 +2987,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -2987,7 +2987,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Cautions Allowed only following FM_PCD_FrmReplicSetGroup() of this group. *//***************************************************************************/ @@ -408,7 +402,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_FRM_REPLIC_MEMBER_ADD_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(48), ioc_compat_fm_pcd_frm_replic_member_params_t) #endif #define FM_PCD_IOC_FRM_REPLIC_MEMBER_ADD _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(48), ioc_fm_pcd_frm_replic_member_params_t) -@@ -3004,7 +3004,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -3004,7 +3004,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Cautions Allowed only following FM_PCD_FrmReplicSetGroup() of this group. *//***************************************************************************/ @@ -417,7 +411,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_FRM_REPLIC_MEMBER_REMOVE_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(49), ioc_compat_fm_pcd_frm_replic_member_t) #endif #define FM_PCD_IOC_FRM_REPLIC_MEMBER_REMOVE _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(49), ioc_fm_pcd_frm_replic_member_t) -@@ -3021,7 +3021,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -3021,7 +3021,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta @Return 0 on success; Error code otherwise. *//***************************************************************************/ @@ -426,7 +420,7 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_STATISTICS_SET_NODE_COMPAT _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(45), void *) #endif #define FM_PCD_IOC_STATISTICS_SET_NODE _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(45), void *) -@@ -3029,7 +3029,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_stats_t { +@@ -3029,7 +3029,7 @@ typedef struct ioc_fm_pcd_cc_tbl_get_sta #endif /* FM_CAPWAP_SUPPORT */ #ifdef NCSW_BACKWARD_COMPATIBLE_API @@ -435,11 +429,9 @@ index d13e878..0606e80 100644 #define FM_PCD_IOC_SET_NET_ENV_CHARACTERISTICS_COMPAT \ FM_PCD_IOC_NET_ENV_CHARACTERISTICS_SET_COMPAT #define FM_PCD_IOC_DELETE_NET_ENV_CHARACTERISTICS_COMPAT \ -diff --git a/include/uapi/linux/fmd/Peripherals/fm_port_ioctls.h b/include/uapi/linux/fmd/Peripherals/fm_port_ioctls.h -index eb9bd9a..23150e5 100644 --- a/include/uapi/linux/fmd/Peripherals/fm_port_ioctls.h +++ b/include/uapi/linux/fmd/Peripherals/fm_port_ioctls.h -@@ -589,7 +589,7 @@ typedef struct ioc_fm_port_pcd_fqids_params_t { +@@ -589,7 +589,7 @@ typedef struct ioc_fm_port_pcd_fqids_par @Return 0 on success; error code otherwise. *//***************************************************************************/ @@ -448,7 +440,7 @@ index eb9bd9a..23150e5 100644 #define FM_PORT_IOC_SET_PCD_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(20), ioc_compat_fm_port_pcd_params_t) #endif #define FM_PORT_IOC_SET_PCD _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(20), ioc_fm_port_pcd_params_t) -@@ -674,7 +674,7 @@ typedef struct ioc_fm_port_pcd_fqids_params_t { +@@ -674,7 +674,7 @@ typedef struct ioc_fm_port_pcd_fqids_par @Return 0 on success; error code otherwise. *//***************************************************************************/ @@ -457,7 +449,7 @@ index eb9bd9a..23150e5 100644 #define FM_PORT_IOC_PCD_KG_MODIFY_INITIAL_SCHEME_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(26), ioc_compat_fm_pcd_kg_scheme_select_t) #endif #define FM_PORT_IOC_PCD_KG_MODIFY_INITIAL_SCHEME _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(26), ioc_fm_pcd_kg_scheme_select_t) -@@ -691,7 +691,7 @@ typedef struct ioc_fm_port_pcd_fqids_params_t { +@@ -691,7 +691,7 @@ typedef struct ioc_fm_port_pcd_fqids_par @Return 0 on success; error code otherwise. *//***************************************************************************/ @@ -466,7 +458,7 @@ index eb9bd9a..23150e5 100644 #define FM_PORT_IOC_PCD_PLCR_MODIFY_INITIAL_PROFILE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(27), ioc_compat_fm_obj_t) #endif #define FM_PORT_IOC_PCD_PLCR_MODIFY_INITIAL_PROFILE _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(27), ioc_fm_obj_t) -@@ -708,7 +708,7 @@ typedef struct ioc_fm_port_pcd_fqids_params_t { +@@ -708,7 +708,7 @@ typedef struct ioc_fm_port_pcd_fqids_par @Cautions Allowed only following FM_PORT_SetPCD() and FM_PORT_DetachPCD() *//***************************************************************************/ @@ -475,7 +467,7 @@ index eb9bd9a..23150e5 100644 #define FM_PORT_IOC_PCD_CC_MODIFY_TREE_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(28), ioc_compat_fm_obj_t) #endif #define FM_PORT_IOC_PCD_CC_MODIFY_TREE _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(28), ioc_fm_obj_t) -@@ -726,7 +726,7 @@ typedef struct ioc_fm_port_pcd_fqids_params_t { +@@ -726,7 +726,7 @@ typedef struct ioc_fm_port_pcd_fqids_par @Cautions Allowed only following FM_PORT_SetPCD(). *//***************************************************************************/ @@ -484,7 +476,7 @@ index eb9bd9a..23150e5 100644 #define FM_PORT_IOC_PCD_KG_BIND_SCHEMES_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(30), ioc_compat_fm_pcd_port_schemes_params_t) #endif #define FM_PORT_IOC_PCD_KG_BIND_SCHEMES _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(30), ioc_fm_pcd_port_schemes_params_t) -@@ -744,7 +744,7 @@ typedef struct ioc_fm_port_pcd_fqids_params_t { +@@ -744,7 +744,7 @@ typedef struct ioc_fm_port_pcd_fqids_par @Cautions Allowed only following FM_PORT_SetPCD(). *//***************************************************************************/ @@ -493,7 +485,7 @@ index eb9bd9a..23150e5 100644 #define FM_PORT_IOC_PCD_KG_UNBIND_SCHEMES_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(31), ioc_compat_fm_pcd_port_schemes_params_t) #endif #define FM_PORT_IOC_PCD_KG_UNBIND_SCHEMES _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(31), ioc_fm_pcd_port_schemes_params_t) -@@ -917,7 +917,7 @@ typedef struct ioc_fm_port_vsp_alloc_params_t { +@@ -917,7 +917,7 @@ typedef struct ioc_fm_port_vsp_alloc_par @Cautions Allowed only following FM_PORT_Init(), and before FM_PORT_SetPCD() and also before FM_PORT_Enable() (i.e. the port should be disabled). *//***************************************************************************/ @@ -502,8 +494,6 @@ index eb9bd9a..23150e5 100644 #define FM_PORT_IOC_VSP_ALLOC_COMPAT _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(38), ioc_compat_fm_port_vsp_alloc_params_t) #endif #define FM_PORT_IOC_VSP_ALLOC _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(38), ioc_fm_port_vsp_alloc_params_t) -diff --git a/include/uapi/linux/fmd/Peripherals/fm_test_ioctls.h b/include/uapi/linux/fmd/Peripherals/fm_test_ioctls.h -index 207ed1e..2646704 100644 --- a/include/uapi/linux/fmd/Peripherals/fm_test_ioctls.h +++ b/include/uapi/linux/fmd/Peripherals/fm_test_ioctls.h @@ -90,7 +90,7 @@ typedef struct ioc_fmt_buff_context_t { @@ -524,6 +514,3 @@ index 207ed1e..2646704 100644 typedef struct ioc_fmt_compat_buff_desc_t { uint32_t qid; compat_uptr_t p_data; --- -2.7.4 - diff --git a/target/linux/layerscape/patches-5.4/820-usb-0005-usb-dwc3-add-otg-properties-update.patch b/target/linux/layerscape/patches-5.4/820-usb-0005-usb-dwc3-add-otg-properties-update.patch index c4dc00a916..1d1e63a07c 100644 --- a/target/linux/layerscape/patches-5.4/820-usb-0005-usb-dwc3-add-otg-properties-update.patch +++ b/target/linux/layerscape/patches-5.4/820-usb-0005-usb-dwc3-add-otg-properties-update.patch @@ -54,7 +54,7 @@ Signed-off-by: Peter Chen * All 3.1 IP version constants are greater than the 3.0 IP --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c -@@ -3427,6 +3427,10 @@ int dwc3_gadget_init(struct dwc3 *dwc) +@@ -3495,6 +3495,10 @@ int dwc3_gadget_init(struct dwc3 *dwc) dwc->gadget.sg_supported = true; dwc->gadget.name = "dwc3-gadget"; dwc->gadget.lpm_capable = true; diff --git a/target/linux/layerscape/patches-5.4/820-usb-0015-MLK-17380-4-usb-host-xhci-add-EH-SINGLE_STEP_SET_FEA.patch b/target/linux/layerscape/patches-5.4/820-usb-0015-MLK-17380-4-usb-host-xhci-add-EH-SINGLE_STEP_SET_FEA.patch index 635850ec7b..0ecfb978e4 100644 --- a/target/linux/layerscape/patches-5.4/820-usb-0015-MLK-17380-4-usb-host-xhci-add-EH-SINGLE_STEP_SET_FEA.patch +++ b/target/linux/layerscape/patches-5.4/820-usb-0015-MLK-17380-4-usb-host-xhci-add-EH-SINGLE_STEP_SET_FEA.patch @@ -24,7 +24,7 @@ Signed-off-by: Peter Chen --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c -@@ -1419,6 +1419,15 @@ int xhci_hub_control(struct usb_hcd *hcd +@@ -1420,6 +1420,15 @@ int xhci_hub_control(struct usb_hcd *hcd /* 4.19.6 Port Test Modes (USB2 Test Mode) */ if (hcd->speed != HCD_USB2) goto error; @@ -174,7 +174,7 @@ Signed-off-by: Peter Chen * bursts that are required to move all packets in this TD. Only SuperSpeed --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c -@@ -5361,6 +5361,7 @@ static const struct hc_driver xhci_hc_dr +@@ -5362,6 +5362,7 @@ static const struct hc_driver xhci_hc_dr .disable_usb3_lpm_timeout = xhci_disable_usb3_lpm_timeout, .find_raw_port_number = xhci_find_raw_port_number, .clear_tt_buffer_complete = xhci_clear_tt_buffer_complete, diff --git a/target/linux/layerscape/patches-5.4/820-usb-0018-MLK-18794-1-usb-host-xhci-add-.bus_suspend-override.patch b/target/linux/layerscape/patches-5.4/820-usb-0018-MLK-18794-1-usb-host-xhci-add-.bus_suspend-override.patch index 57818b1136..3140058689 100644 --- a/target/linux/layerscape/patches-5.4/820-usb-0018-MLK-18794-1-usb-host-xhci-add-.bus_suspend-override.patch +++ b/target/linux/layerscape/patches-5.4/820-usb-0018-MLK-18794-1-usb-host-xhci-add-.bus_suspend-override.patch @@ -24,7 +24,7 @@ Signed-off-by: Peter Chen --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c -@@ -5378,6 +5378,8 @@ void xhci_init_driver(struct hc_driver * +@@ -5379,6 +5379,8 @@ void xhci_init_driver(struct hc_driver * drv->reset = over->reset; if (over->start) drv->start = over->start; diff --git a/target/linux/layerscape/patches-5.4/820-usb-0021-MLK-22099-usb-host-xhci-do-warm-reset-for-link-state.patch b/target/linux/layerscape/patches-5.4/820-usb-0021-MLK-22099-usb-host-xhci-do-warm-reset-for-link-state.patch index 9cbf4ee139..b31c695794 100644 --- a/target/linux/layerscape/patches-5.4/820-usb-0021-MLK-22099-usb-host-xhci-do-warm-reset-for-link-state.patch +++ b/target/linux/layerscape/patches-5.4/820-usb-0021-MLK-22099-usb-host-xhci-do-warm-reset-for-link-state.patch @@ -16,7 +16,7 @@ Signed-off-by: Li Jun --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c -@@ -1732,7 +1732,8 @@ static bool xhci_port_missing_cas_quirk( +@@ -1733,7 +1733,8 @@ static bool xhci_port_missing_cas_quirk( return false; if (((portsc & PORT_PLS_MASK) != XDEV_POLLING) && diff --git a/target/linux/mediatek/mt7622/config-5.4 b/target/linux/mediatek/mt7622/config-5.4 index e037736055..cf12a1f52c 100755 --- a/target/linux/mediatek/mt7622/config-5.4 +++ b/target/linux/mediatek/mt7622/config-5.4 @@ -82,26 +82,24 @@ CONFIG_ARCH_WANT_FRAME_POINTERS=y CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y CONFIG_ARM64=y CONFIG_ARM64_4K_PAGES=y -CONFIG_ARM64_CNP=y +# CONFIG_ARM64_CNP is not set CONFIG_ARM64_CONT_SHIFT=4 -CONFIG_ARM64_ERRATUM_1165522=y -CONFIG_ARM64_ERRATUM_1286807=y -CONFIG_ARM64_ERRATUM_1418040=y -CONFIG_ARM64_HW_AFDBM=y +# CONFIG_ARM64_ERRATUM_1165522 is not set +# CONFIG_ARM64_ERRATUM_1286807 is not set +# CONFIG_ARM64_ERRATUM_1418040 is not set +CONFIG_ARM64_ERRATUM_843419=y +CONFIG_ARM64_ERRATUM_845719=y +CONFIG_ARM64_MODULE_PLTS=y CONFIG_ARM64_PAGE_SHIFT=12 -CONFIG_ARM64_PAN=y CONFIG_ARM64_PA_BITS=48 CONFIG_ARM64_PA_BITS_48=y -CONFIG_ARM64_PTR_AUTH=y +# CONFIG_ARM64_PTR_AUTH is not set CONFIG_ARM64_SSBD=y -CONFIG_ARM64_SVE=y +# CONFIG_ARM64_SVE is not set # CONFIG_ARM64_SW_TTBR0_PAN is not set CONFIG_ARM64_TAGGED_ADDR_ABI=y -CONFIG_ARM64_UAO=y CONFIG_ARM64_VA_BITS=39 CONFIG_ARM64_VA_BITS_39=y -CONFIG_ARM64_VHE=y -CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y # CONFIG_ARMV8_DEPRECATED is not set CONFIG_ARM_AMBA=y CONFIG_ARM_ARCH_TIMER=y @@ -138,7 +136,7 @@ CONFIG_BT_HS=y CONFIG_BT_LE=y CONFIG_BT_MTKUART=y CONFIG_BT_QCA=y -CONFIG_CAVIUM_TX2_ERRATUM_219=y +# CONFIG_CAVIUM_TX2_ERRATUM_219 is not set CONFIG_CC_HAS_KASAN_GENERIC=y CONFIG_CLKDEV_LOOKUP=y CONFIG_CLKSRC_MMIO=y @@ -250,7 +248,7 @@ CONFIG_FONT_8x16=y CONFIG_FONT_AUTOSELECT=y CONFIG_FONT_SUPPORT=y CONFIG_FRAME_POINTER=y -CONFIG_FUJITSU_ERRATUM_010001=y +# CONFIG_FUJITSU_ERRATUM_010001 is not set CONFIG_FW_LOADER_PAGED_BUF=y CONFIG_GENERIC_ALLOCATOR=y CONFIG_GENERIC_ARCH_TOPOLOGY=y @@ -284,7 +282,8 @@ CONFIG_GLOB=y CONFIG_GPIOLIB=y CONFIG_GRO_CELLS=y CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDEN_BRANCH_PREDICTOR=y +# CONFIG_HARDEN_BRANCH_PREDICTOR is not set +# CONFIG_HARDEN_EL2_VECTORS is not set CONFIG_HARDIRQS_SW_RESEND=y CONFIG_HAS_DMA=y CONFIG_HAS_IOMEM=y @@ -332,6 +331,7 @@ CONFIG_HAVE_GENERIC_VDSO=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y CONFIG_HAVE_NET_DSA=y CONFIG_HAVE_PATA_PLATFORM=y CONFIG_HAVE_PCI=y @@ -493,6 +493,7 @@ CONFIG_PINCTRL_MT7622=y CONFIG_PINCTRL_MT8516=y CONFIG_PINCTRL_MTK=y CONFIG_PINCTRL_MTK_MOORE=y +CONFIG_PLUGIN_HOSTCC="g++" CONFIG_PM=y CONFIG_PM_CLK=y CONFIG_PM_GENERIC_DOMAINS=y @@ -529,7 +530,6 @@ CONFIG_RTC_DRV_MT7622=y CONFIG_RTC_I2C_AND_SPI=y CONFIG_RTL8367S_GSW=y CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_SCHED_MC=y CONFIG_SCSI=y # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set CONFIG_SERIAL_8250_FSL=y diff --git a/target/linux/mediatek/patches-5.4/0503-crypto-fix-eip97-cache-incoherent.patch b/target/linux/mediatek/patches-5.4/0503-crypto-fix-eip97-cache-incoherent.patch index bb2bcebbfd..5bc0fd0b7d 100644 --- a/target/linux/mediatek/patches-5.4/0503-crypto-fix-eip97-cache-incoherent.patch +++ b/target/linux/mediatek/patches-5.4/0503-crypto-fix-eip97-cache-incoherent.patch @@ -1,6 +1,6 @@ --- a/drivers/crypto/inside-secure/safexcel.h +++ b/drivers/crypto/inside-secure/safexcel.h -@@ -722,6 +722,9 @@ +@@ -722,6 +722,9 @@ enum safexcel_eip_version { /* Priority we use for advertising our algorithms */ #define SAFEXCEL_CRA_PRIORITY 300 @@ -12,7 +12,7 @@ "\x8E\x61\x19\x48\x31\xE8\x1A\x8F" \ --- a/drivers/crypto/inside-secure/safexcel_hash.c +++ b/drivers/crypto/inside-secure/safexcel_hash.c -@@ -57,9 +57,9 @@ +@@ -57,9 +57,9 @@ struct safexcel_ahash_req { u8 block_sz; /* block size, only set once */ u8 digest_sz; /* output digest size, only set once */ __le32 state[SHA3_512_BLOCK_SIZE / diff --git a/target/linux/mediatek/patches-5.4/0900-bt-mtk-serial-fix.patch b/target/linux/mediatek/patches-5.4/0900-bt-mtk-serial-fix.patch index 473fb688ec..104334dc03 100644 --- a/target/linux/mediatek/patches-5.4/0900-bt-mtk-serial-fix.patch +++ b/target/linux/mediatek/patches-5.4/0900-bt-mtk-serial-fix.patch @@ -19,7 +19,7 @@ }, [PORT_NPCM] = { .name = "Nuvoton 16550", -@@ -2561,6 +2561,11 @@ serial8250_do_set_termios(struct uart_po +@@ -2564,6 +2564,11 @@ serial8250_do_set_termios(struct uart_po unsigned long flags; unsigned int baud, quot, frac = 0; diff --git a/target/linux/mediatek/patches-5.4/1003-dts-mt7622-rfb-change-to-ax-mtd-layout.patch b/target/linux/mediatek/patches-5.4/1003-dts-mt7622-rfb-change-to-ax-mtd-layout.patch index eba3caf9aa..817948986b 100644 --- a/target/linux/mediatek/patches-5.4/1003-dts-mt7622-rfb-change-to-ax-mtd-layout.patch +++ b/target/linux/mediatek/patches-5.4/1003-dts-mt7622-rfb-change-to-ax-mtd-layout.patch @@ -1,6 +1,6 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts 2020-07-16 16:31:01.073767264 +0800 -+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts 2020-07-16 16:33:02.518867067 +0800 -@@ -579,17 +579,17 @@ +--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts ++++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +@@ -591,17 +591,17 @@ factory: partition@1c0000 { label = "Factory"; diff --git a/target/linux/mvebu/patches-5.4/030-linkstation-poweroff.patch b/target/linux/mvebu/patches-5.4/030-linkstation-poweroff.patch index e4dee5c09e..7b7e8cd034 100644 --- a/target/linux/mvebu/patches-5.4/030-linkstation-poweroff.patch +++ b/target/linux/mvebu/patches-5.4/030-linkstation-poweroff.patch @@ -1,6 +1,6 @@ --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig -@@ -99,6 +99,17 @@ +@@ -99,6 +99,17 @@ config POWER_RESET_HISI help Reboot support for Hisilicon boards. @@ -20,7 +20,7 @@ depends on ARCH_QCOM --- a/drivers/power/reset/Makefile +++ b/drivers/power/reset/Makefile -@@ -10,6 +10,7 @@ +@@ -10,6 +10,7 @@ obj-$(CONFIG_POWER_RESET_GEMINI_POWEROFF obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o @@ -28,7 +28,7 @@ obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o ---- a/dev/null +--- /dev/null +++ b/drivers/power/reset/linkstation-poweroff.c @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: GPL-2.0 diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-2660-a1.dts b/target/linux/ramips/dts/mt7621_dlink_dir-2660-a1.dts new file mode 100644 index 0000000000..d15529b0c4 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_dlink_dir-2660-a1.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7621_dlink_dir-xx60-a1.dtsi" + +/ { + compatible = "dlink,dir-2660-a1", "mediatek,mt7621-soc"; + model = "D-Link DIR-2660 A1"; + + aliases { + led-boot = &led_power_orange; + led-failsafe = &led_power_white; + led-running = &led_power_white; + led-upgrade = &led_net_orange; + }; + + leds { + compatible = "gpio-leds"; + + led_power_orange: power_orange { + label = "dir-2660-a1:orange:power"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + + led_power_white: power_white { + label = "dir-2660-a1:white:power"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + led_net_orange: net_orange { + label = "dir-2660-a1:orange:net"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + + net_white { + label = "dir-2660-a1:white:net"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + + usb2_white { + label = "dir-2660-a1:white:usb2"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + trigger-sources = <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + + usb3_white { + label = "dir-2660-a1:white:usb3"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + trigger-sources = <&xhci_ehci_port1>; + linux,default-trigger = "usbport"; + }; + }; +}; + +&wifi0 { + mtd-mac-address = <&factory 0xe000>; + mtd-mac-address-increment = <1>; +}; + +&wifi1 { + mtd-mac-address = <&factory 0xe000>; + mtd-mac-address-increment = <2>; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 97fddfe274..681062ad71 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -275,6 +275,13 @@ define Device/dlink_dir-1960-a1 endef TARGET_DEVICES += dlink_dir-1960-a1 +define Device/dlink_dir-2660-a1 + $(Device/dlink_dir-xx60-a1) + DEVICE_MODEL := DIR-2660 + DEVICE_VARIANT := A1 +endef +TARGET_DEVICES += dlink_dir-2660-a1 + define Device/dlink_dir-860l-b1 $(Device/dsa-migration) $(Device/seama) diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index e594b47a1a..5fe71509b8 100755 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -26,7 +26,8 @@ d-team,pbr-m1|\ gehua,ghl-r-001) ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "wan" ;; -dlink,dir-1960-a1) +dlink,dir-1960-a1|\ +dlink,dir-2660-a1) ucidef_set_led_netdev "wan" "wan" "$boardname:white:net" "wan" ;; dlink,dir-860l-b1|\ diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index 90749f589b..b1feea7ae6 100755 --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -46,6 +46,7 @@ platform_do_upgrade() { asus,rt-ac65p|\ asus,rt-ac85p|\ dlink,dir-1960-a1|\ + dlink,dir-2660-a1|\ hiwifi,hc5962|\ linksys,ea7300-v1|\ linksys,ea7500-v2|\ diff --git a/target/linux/ramips/patches-5.4/401-net-ethernet-mediatek-support-net-labels.patch b/target/linux/ramips/patches-5.4/401-net-ethernet-mediatek-support-net-labels.patch index 66f1b12618..d7c0df6046 100644 --- a/target/linux/ramips/patches-5.4/401-net-ethernet-mediatek-support-net-labels.patch +++ b/target/linux/ramips/patches-5.4/401-net-ethernet-mediatek-support-net-labels.patch @@ -14,7 +14,7 @@ Signed-off-by: René van Dorst --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c -@@ -2856,6 +2856,7 @@ static const struct net_device_ops mtk_n +@@ -2860,6 +2860,7 @@ static const struct net_device_ops mtk_n static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np) { @@ -22,7 +22,7 @@ Signed-off-by: René van Dorst const __be32 *_id = of_get_property(np, "reg", NULL); struct phylink *phylink; int phy_mode, id, err; -@@ -2948,6 +2949,9 @@ static int mtk_add_mac(struct mtk_eth *e +@@ -2952,6 +2953,9 @@ static int mtk_add_mac(struct mtk_eth *e eth->netdev[id]->max_mtu = MTK_MAX_RX_LENGTH - MTK_RX_ETH_HLEN; diff --git a/target/linux/x86/patches-5.4/011-tune_lzma_options.patch b/target/linux/x86/patches-5.4/011-tune_lzma_options.patch index 8070af6085..451c5bcb03 100644 --- a/target/linux/x86/patches-5.4/011-tune_lzma_options.patch +++ b/target/linux/x86/patches-5.4/011-tune_lzma_options.patch @@ -4,11 +4,11 @@ # --------------------------------------------------------------------------- quiet_cmd_lzma = LZMA $@ -- cmd_lzma = { cat $(real-prereqs) | lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so; $(size_append); } > $@ -+ cmd_lzma = { cat $(real-prereqs) | lzma e -lc8 -eos -si -so; $(size_append); } > $@ +- cmd_lzma = { cat $(real-prereqs) | $(LZMA) e -d20 -lc1 -lp2 -pb2 -eos -si -so; $(size_append); } > $@ ++ cmd_lzma = { cat $(real-prereqs) | $(LZMA) e -lc8 -eos -si -so; $(size_append); } > $@ quiet_cmd_lzo = LZO $@ - cmd_lzo = { cat $(real-prereqs) | lzop -9; $(size_append); } > $@ + cmd_lzo = { cat $(real-prereqs) | $(KLZOP) -9; $(size_append); } > $@ --- a/arch/x86/include/asm/boot.h +++ b/arch/x86/include/asm/boot.h @@ -24,7 +24,7 @@