fish/immortalwrt
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge Official Source

Browse Source
This commit is contained in:
AmadeusGhost 2020-08-30 12:18:07 +08:00
commit 5a0732011c
20 changed files with 285 additions and 363 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/apm821xx/base-files/etc/board.d/01_leds
View File

@ -42,9 +42,6 @@ netgear,wndap660)
netgear,wndr4700)
ucidef_set_led_switch "wan_green" "WAN (green)" "wndr4700:green:wan" "switch0" "0x20"
ucidef_set_led_netdev "wan_yellow" "WAN (yellow)" "wndr4700:yellow:wan" "eth0.2" "tx rx"
ucidef_set_led_usbport "usb3" "USB3" "wndr4700:blue:usb" "usb2-port1" "usb2-port2" "usb3-port1" "usb3-port2"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "wndr4700:blue:wlan" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "wndr4700:blue:wlan" "phy1tpt"
;;
*)

42
target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
View File

@ -7,27 +7,9 @@
board=$(board_name)
case "$FIRMWARE" in
"pci_wmac0.eeprom")
case $board in
netgear,wndr4700)
. /lib/upgrade/nand.sh
if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
caldata_extract_ubi "caldata" 0x5000 0x1000
else
caldata_extract "wifi_data" 0x5000 0x1000
ath9k_patch_mac $(mtd_get_mac_binary wifi_data 0xc)
fi
;;
*)
caldata_die "board $board is not supported yet"
;;
esac
;;
"pci_wmac1.eeprom")
case $board in
netgear,wndr4700)
"ath9k-eeprom-pci-0000:43:00.0.bin")
case $board in
netgear,wndr4700)
. /lib/upgrade/nand.sh
if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
@ -42,4 +24,22 @@ case "$FIRMWARE" in
;;
esac
;;
"ath9k-eeprom-pci-0000:44:00.0.bin")
case $board in
netgear,wndr4700)
. /lib/upgrade/nand.sh
if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
caldata_extract_ubi "caldata" 0x5000 0x1000
else
caldata_extract "wifi_data" 0x5000 0x1000
ath9k_patch_mac $(mtd_get_mac_binary wifi_data 0xc)
fi
;;
*)
caldata_die "board $board is not supported yet"
;;
esac
;;
esac

1
target/linux/apm821xx/config-5.4
View File

@ -334,7 +334,6 @@ CONFIG_VDSO32=y
# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
# CONFIG_WARP is not set
CONFIG_WATCHDOG_CORE=y
# CONFIG_WNDR4700 is not set
# CONFIG_XILINX_SYSACE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
CONFIG_XZ_DEC_BCJ=y

33
target/linux/apm821xx/dts/apm82181.dtsi
View File

@ -1,24 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Device Tree for Bluestone (APM821xx) board.
*
* Copyright (c) 2010, Applied Micro Circuits Corporation
* Author: Tirumala R Marri <tmarri@apm.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
#include <dt-bindings/dma/dw-dmac.h>
@ -40,7 +25,7 @@
#address-cells = <1>;
#size-cells = <0>;
CPU00: cpu@0 {
CPU0: cpu@0 {
device_type = "cpu";
model = "PowerPC,apm82181";
reg = <0x00000000>;
@ -170,7 +155,7 @@
dcr-reg = <0x240 0x009>;
interrupts = <0x1a IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&UIC2>;
status = "disabled";
};
TRNG: trng@110000 {
@ -306,6 +291,8 @@
reg = <0xef600800 0x00000014>;
interrupt-parent = <&UIC0>;
interrupts = <0x03 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
@ -407,6 +394,8 @@
dmas = <&AHBDMA0 0 0 1>;
dma-names = "sata-dma";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
SATA1: sata@bffd1800 {
@ -417,6 +406,8 @@
dmas = <&AHBDMA0 1 0 2>;
dma-names = "sata-dma";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
MSI: ppc4xx-msi@c10000000 {
@ -457,7 +448,8 @@
dcr-reg = <0x100 0x020>;
sdr-base = <0x300>;
/* Outbound ranges, one memory and one IO,
/*
* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000>,
@ -470,7 +462,8 @@
/* This drives busses 0x40 to 0x7f */
bus-range = <0x40 0x7f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
/*
* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* We are de-swizzling here because the numbers are actually for
* port of the root complex virtual P2P bridge. But I want

56
target/linux/apm821xx/dts/meraki-mr24.dts
View File

@ -1,13 +1,10 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Device Tree Source for Meraki MR24 (Ikarem)
*
* Copyright (C) 2016 Chris Blake <chrisrblake93@gmail.com>
*
* Based on Cisco Meraki GPL Release r23-20150601 MR24 DTS
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*/
/dts-v1/;
@ -182,6 +179,57 @@
&PCIE0 {
status = "okay";
/*
* relevant lspci topology:
*
* -+-[0000:40]---00.0-[41-7f]----00.0-[42-45]--+-02.0-[43]----00.0
* +-03.0-[44]----00.0
*
*/
bridge@64,0 {
reg = <0x00400000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
bridge@65,0 {
/* IDT PES3T3 PCI Express Switch */
compatible = "pci111d,8039";
reg = <0x00410000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
bridge@66,2 {
compatible = "pci111d,8039";
reg = <0x00421000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi0: wifi@67,0 {
/* Atheros AR9380 2.4GHz */
compatible = "pci168c,0030";
reg = <0x00430000 0 0 0 0>;
};
};
bridge@66,3 {
compatible = "pci111d,8039";
reg = <0x00421800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi1: wifi@68,0 {
/* Atheros AR9380 5GHz */
compatible = "pci168c,0030";
reg = <0x00440000 0 0 0 0>;
};
};
};
};
};
&MSI {

24
target/linux/apm821xx/dts/meraki-mx60.dts
View File

@ -1,13 +1,10 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Device Tree Source for Meraki MX60/MX60W (Buckminster)
*
* Copyright (C) 2016 Chris Blake <chrisrblake93@gmail.com>
*
* Based on Cisco Meraki DTS extracted from release wired-12-217818
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*/
/dts-v1/;
@ -175,6 +172,25 @@
&PCIE0 {
/* Leave this enabled as u-boot on the MX60 will disable it for us */
status = "okay";
/*
* relevant lspci topology:
*
* -+-[0000:40]---00.0-[41-7f]----00.0
*/
bridge@64,0 {
reg = <0x00400000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi0: wifi@65,0 {
/* Atheros AR9380 2.4/5GHz */
compatible = "pci168c,0030";
reg = <0x00410000 0 0 0 0>;
};
};
};
&MSI {

29
target/linux/apm821xx/dts/netgear-wndap620.dts
View File

@ -1,10 +1,4 @@
/*
* Device Tree Source for Netgear WNDAP620
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*/
// SPDX-License-Identifier: GPL-2.0-only
/dts-v1/;
@ -26,3 +20,24 @@
gpios = <&GPIO0 10 GPIO_ACTIVE_HIGH>;
};
};
&PCIE0 {
/*
* relevant lspci topology:
*
* -+-[0000:40]---00.0-[41-7f]----00.0
*/
bridge@64,0 {
reg = <0x00400000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi0: wifi@65,0 {
/* Atheros AR9380 5GHz */
compatible = "pci168c,0030";
reg = <0x00410000 0 0 0 0>;
};
};
};

62
target/linux/apm821xx/dts/netgear-wndap660.dts
View File

@ -1,10 +1,4 @@
/*
* Device Tree Source for Netgear WNDAP660
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*/
// SPDX-License-Identifier: GPL-2.0-only
/dts-v1/;
@ -36,3 +30,57 @@
gpios = <&GPIO0 10 GPIO_ACTIVE_HIGH>;
};
};
&PCIE0 {
/*
* relevant lspci topology:
*
* -+-[0000:40]---00.0-[41-7f]----00.0-[42-45]--+-02.0-[43]----00.0
* +-03.0-[44]----00.0
*
*/
bridge@64,0 {
reg = <0x00400000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
bridge@65,0 {
/* IDT PES3T3 PCI Express Switch */
compatible = "pci111d,8039";
reg = <0x00410000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
bridge@66,2 {
compatible = "pci111d,8039";
reg = <0x00421000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi0: wifi@67,0 {
/* Atheros AR9380 2.4/5GHz */
compatible = "pci168c,0030";
reg = <0x00430000 0 0 0 0>;
};
};
bridge@66,3 {
compatible = "pci111d,8039";
reg = <0x00421800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi1: wifi@68,0 {
/* Atheros AR9380 2.4/5GHz */
compatible = "pci168c,0030";
reg = <0x00440000 0 0 0 0>;
};
};
};
};
};

5
target/linux/apm821xx/dts/netgear-wndap6x0.dtsi
View File

@ -1,9 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Device Tree Source for Netgear WNDAP620 and WNDAP660
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*/
#include "apm82181.dtsi"

101
target/linux/apm821xx/dts/netgear-wndr4700.dts
View File

@ -1,11 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Device Tree Source for Netgear WNDR4700/WNDR4720 Series
*
* Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*/
/dts-v1/;
@ -15,7 +12,7 @@
/ {
model = "Netgear WNDR4700/WNDR4720 Series";
compatible = "netgear,wndr4700";
compatible = "netgear,wndr4700", "apm,bluestone";
aliases {
serial0 = &UART0;
@ -381,6 +378,9 @@
usb-blue {
label = "wndr4700:blue:usb";
gpios = <&GPIO0 10 GPIO_ACTIVE_HIGH>;
trigger-sources = <&usb2_port 1>, <&usb2_port 2>,
<&usb3_port 1>, <&usb3_port 2>;
linux,default-trigger = "usbport";
};
logo-white {
@ -412,12 +412,103 @@
wlan-blue {
label = "wndr4700:blue:wlan";
gpios = <&GPIO0 18 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
};
};
&PCIE0 {
status = "okay";
/*
* relevant lspci topology:
*
* -+-[0000:40]---00.0-[41-7f]----00.0-[42-45]--+-02.0-[43]----00.0
* +-03.0-[44]----00.0
* \-04.0-[45]----00.0
*
*/
bridge@64,0 {
reg = <0x00400000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
bridge@65,0 {
/* IDT PES4T4 PCI Express Switch */
compatible = "pci111d,803a";
reg = <0x00410000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
bridge@66,2 {
compatible = "pci111d,803a";
reg = <0x00421000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi0: wifi@67,0 {
/* Atheros AR9380 5GHz */
compatible = "pci168c,0030";
reg = <0x00430000 0 0 0 0>;
qca,no-eeprom;
/* wifi CAL & MAC is stored in nvram */
/*
* Because this was such a pain.
* Here's the full device path:
* pci0000:40/0000:40:00.0/0000:41:00.0/0000:42:02.0/0000:43:00.0
*/
};
};
bridge@66,3 {
compatible = "pci111d,803a";
reg = <0x00421800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi1: wifi@68,0 {
/* Atheros AR9381 2.4GHz */
compatible = "pci168c,0033";
reg = <0x00440000 0 0 0 0>;
qca,no-eeprom;
/* wifi CAL & MAC is stored in nvram */
};
};
bridge@66,4 {
compatible = "pci111d,803a";
reg = <0x00422000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
usb1: usb@69,0 {
/* Renesas uPD720202 */
compatible = "pci1912,0015";
reg = <0x00450000 0 0 0 0>;
#address-cells = <1>;
#size-cells = <0>;
usb2_port: port@1 {
reg = <1>;
#trigger-source-cells = <1>;
};
usb3_port: port@2 {
reg = <2>;
#trigger-source-cells = <1>;
};
};
};
};
};
};
&MSI {

5
target/linux/apm821xx/dts/wd-mybooklive.dts
View File

@ -1,10 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
* (c) Copyright 2010 Western Digital Technologies, Inc. All Rights Reserved.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*/
/dts-v1/;

99
target/linux/apm821xx/files/arch/powerpc/platforms/44x/wndr4700.c
View File

@ -1,99 +0,0 @@
/*
* Netgear Centria N900 WNDR4700/WNDR4720 platform support
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; version 2 of the License.
*
* This implemention is based on the simple platform support for the
* PowerPC 44x chips.
*/
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/ppc4xx.h>
#include <asm/prom.h>
#include <asm/time.h>
#include <asm/udbg.h>
#include <asm/uic.h>
#include <linux/init.h>
#include <linux/of_platform.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
#include <linux/firmware.h>
#include <linux/delay.h>
#include <asm/unaligned.h>
static const struct of_device_id ppc44x_of_bus[] __initconst = {
{ .compatible = "ibm,plb4", },
{ .compatible = "ibm,opb", },
{ .compatible = "ibm,ebc", },
{ .compatible = "simple-bus", },
{},
};
static int __init ppc44x_device_probe(void)
{
of_platform_bus_probe(NULL, ppc44x_of_bus, NULL);
return 0;
}
machine_device_initcall(wndr4700, ppc44x_device_probe);
static char *board[] __initdata = {
"netgear,wndr4700",
};
static int __init ppc44x_probe(void)
{
unsigned long root = of_get_flat_dt_root();
int i = 0;
pcie_bus_config = PCIE_BUS_PEER2PEER; /* force 128 Byte MPS */
for (i = 0; i < ARRAY_SIZE(board); i++) {
if (of_flat_dt_is_compatible(root, board[i])) {
pci_set_flags(PCI_REASSIGN_ALL_RSRC); /* PCI_PROBE_ONLY */
return 1;
}
}
return 0;
}
define_machine(wndr4700) {
.name = "WNDR4700 Platform",
.probe = ppc44x_probe,
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
.restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
static struct ath9k_platform_data ar9380_wmac0_data = {
.led_pin = -1,
.eeprom_name = "pci_wmac1.eeprom",
};
static struct ath9k_platform_data ar9580_wmac1_data = {
.led_pin = -1,
.eeprom_name = "pci_wmac0.eeprom",
};
static int __init wndr4700_ath9k_eeprom_load(void)
{
struct pci_dev *dev;
dev = pci_get_device(PCI_VENDOR_ID_ATHEROS, 0x0030, NULL);
if (dev)
dev->dev.platform_data = &ar9380_wmac0_data;
dev = pci_get_device(PCI_VENDOR_ID_ATHEROS, 0x0033, NULL);
if (dev)
dev->dev.platform_data = &ar9580_wmac1_data;
return 0;
}
machine_device_initcall(wndr4700, wndr4700_ath9k_eeprom_load);

1
target/linux/apm821xx/nand/config-default
View File

@ -48,5 +48,4 @@ CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_TC654=y
CONFIG_SWCONFIG=y
CONFIG_SWCONFIG_LEDS=y
CONFIG_WNDR4700=y

32
target/linux/apm821xx/patches-5.4/202-add-netgear-wndr4700-support.patch
View File

@ -1,32 +0,0 @@
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -4,6 +4,7 @@ ifneq ($(CONFIG_PPC4xx_CPM),y)
obj-y += idle.o
endif
obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o
+obj-$(CONFIG_WNDR4700) += wndr4700.o
obj-$(CONFIG_EBONY) += ebony.o
obj-$(CONFIG_SAM440EP) += sam440ep.o
obj-$(CONFIG_WARP) += warp.o
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -243,6 +243,19 @@ config ICON
help
This option enables support for the AMCC PPC440SPe evaluation board.
+config WNDR4700
+ bool "WNDR4700"
+ depends on 44x
+ default n
+ select APM821xx
+ select PCI_MSI
+ select PPC4xx_MSI
+ select PPC4xx_PCI_EXPRESS
+ select IBM_EMAC_RGMII
+ select 460EX
+ help
+ This option enables support for the Netgear WNDR4700/WNDR4720 board.
+
config XILINX_VIRTEX440_GENERIC_BOARD
bool "Generic Xilinx Virtex 5 FXT board support"
depends on 44x

7
target/linux/ipq40xx/base-files/etc/hotplug.d/net/16_adjust_network
View File

@ -1,7 +0,0 @@
#!/bin/sh
[ -f /lib/adjust_network.sh ] && {
. /lib/adjust_network.sh
adjust_eth_queue
}

19
target/linux/ipq40xx/base-files/etc/init.d/adjust_network
View File

@ -1,19 +0,0 @@
#!/bin/sh /etc/rc.common
# Copyright (C) 2006-2011 OpenWrt.org
START=11
STOP=98
adjust_smp_affinity() {
test -f /lib/adjust_network.sh && {
. /lib/adjust_network.sh
adjust_eth_queue
adjust_edma_smp_affinity
adjust_radio_smp_affinity
}
}
boot() {
adjust_smp_affinity
}

35
target/linux/ipq40xx/base-files/etc/init.d/zlinksys_recovery
View File

@ -1,35 +0,0 @@
#!/bin/sh /etc/rc.common
#
# This script sets auto_recovery to "yes" and resets the boot counter to 0.
# As a golden rule, this should be the latest script to run at boot. For a
# developer snapshot, it is fine to set auto_recovery here. But for a stable
# release, this script must in fact turn off auto_recovery.
#
# Why? Because the custom sysupgrade script for the device will turn on
# auto_recovery to "yes". And it's the job of this script to set the
# boot boot_count to 0 and then disable auto_recovery, as that condition
# means that the stable release went well.
#
# I have to repeat: this script should be changed for stable releases.
START=99
boot() {
. /lib/functions.sh
case $(board_name) in
linksys,ea6350v3)
# make sure auto_recovery in uboot is always on
IS_AUTO_RECOVERY="$(fw_printenv -n auto_recovery)"
if [ "$IS_AUTO_RECOVERY" != "yes" ] ; then
fw_setenv auto_recovery yes
echo "Linksys EA6350v3: fw_setenv: auto_recovery has been set to yes"
fi
# reset the boot counter
fw_setenv boot_count 0
mtd resetbc s_env
echo "Linksys EA6350v3: boot counter has been reset"
echo "Linksys EA6350v3: boot_part=$(fw_printenv -n boot_part)"
;;
esac
}

89
target/linux/ipq40xx/base-files/lib/adjust_network.sh
View File

@ -1,89 +0,0 @@
#!/bin/sh
# this scripts is used for adjust cpu's choice of interrupts.
#
################################################
# Adjust smp_affinity of edma
# Globals:
# None
# Arguments:
# None
# Returns:
# None
# Remark:
# execute only once on start-up.
################################################
adjust_edma_smp_affinity() {
grep -q edma_eth_ /proc/interrupts || return 0
local nr=`cat /proc/cpuinfo | grep processor | wc -l`
local cpu=0
local tx_irq_num
for tx_num in `seq 0 1 15` ; do
cpu=`printf "%x" $((1<<((tx_num/4+0)%nr)))`
tx_irq_num=`grep -m1 edma_eth_tx$tx_num /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
[ -n "$tx_irq_num" ] && echo $cpu > /proc/irq/$tx_irq_num/smp_affinity
done
for rx_num in `seq 0 1 7` ; do
cpu=`printf "%x" $((1<<((rx_num/2)%nr)))`
rx_irq_num=`grep -m1 edma_eth_rx$rx_num /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
[ -n "$rx_irq_num" ] && echo $cpu > /proc/irq/$rx_irq_num/smp_affinity
done
}
################################################
# Adjust smp_affinity of ath10k for 2G and 5G
# Globals:
# None
# Arguments:
# None
# Returns:
# None
# Remark:
# execute only once on start-up.
################################################
adjust_radio_smp_affinity() {
local irqs="`grep -E 'ath10k' /proc/interrupts | cut -d ':' -f 1 | tr -d ' '`"
local nr=`cat /proc/cpuinfo | grep processor | wc -l`
local idx=2
for irq in $irqs; do
cpu=`printf "%x" $((1<<((idx)%nr)))`
echo $cpu > /proc/irq/$irq/smp_affinity
idx=$((idx+1))
done
}
################################################
# Adjust queue of eth
# Globals:
# None
# Arguments:
# None
# Returns:
# None
# Remark:
# Each network reboot needs to be executed.
################################################
adjust_eth_queue() {
local nr=`cat /proc/cpuinfo | grep processor | wc -l`
local idx=0
for epath in /sys/class/net/eth[0-9]*; do
test -e $epath || break
echo $epath | grep -q "\." && continue
eth=`basename $epath`
idx=0
for exps in /sys/class/net/$eth/queues/rx-[0-9]*/rps_cpus; do
test -e $exps || break
cpu=`printf "%x" $((1<<((idx+1)%nr)))`
idx=$((idx+1))
echo $cpu > $exps
echo 256 > `dirname $exps`/rps_flow_cnt
done
which ethtool >/dev/null 2>&1 && ethtool -K $eth gro off
done
echo 1024 > /proc/sys/net/core/rps_sock_flow_entries
}

1
target/linux/ipq40xx/config-4.19
View File

@ -67,7 +67,6 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BOUNCE=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKSRC_QCOM=y
CONFIG_CLONE_BACKWARDS=y

4
target/linux/oxnas/image/ox820.mk
View File

@ -68,6 +68,10 @@ define Device/shuttle_kd20
DEVICE_VENDOR := Shuttle
DEVICE_MODEL := KD20
SUPPORTED_DEVICES += kd20
KERNEL_INITRAMFS_PREFIX = $$(IMAGE_PREFIX)-factory
KERNEL_INITRAMFS_SUFFIX := .tar.gz
KERNEL_INITRAMFS = kernel-bin | append-dtb | uImage none | omninas-factory | \
encrypt-3des sohmuntitnlaes
DEVICE_PACKAGES := kmod-usb2-oxnas kmod-usb3 kmod-usb-ledtrig-usbport \
kmod-i2c-gpio kmod-rtc-pcf8563 kmod-gpio-beeper kmod-hwmon-drivetemp \
kmod-hwmon-gpiofan kmod-ata-oxnas-sata kmod-md-mod kmod-md-raid0 \