brcm2708: rename target to bcm27xx (#3098)

Signed-off-by: AmadeusGhost <42570690+AmadeusGhost@users.noreply.github.com>

config/Config-images.in

@@ -14,11 +14,11 @@ menu "Target Images"
 
 		choice
 			prompt "Compression"
-			default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ar71xx
-			default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ramips
 			default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_apm821xx
+			default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ar71xx
+			default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_lantiq
 			default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_mpc85xx
-			default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ipq40xx
+			default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ramips
 			default TARGET_INITRAMFS_COMPRESSION_NONE
 			depends on TARGET_ROOTFS_INITRAMFS
 			help
@@ -194,7 +194,7 @@ menu "Target Images"
 		depends on TARGET_ROOTFS_EXT4FS || TARGET_ROOTFS_ISO || TARGET_ROOTFS_JFFS2 || TARGET_ROOTFS_SQUASHFS
 		select PACKAGE_grub2
 		default y
-		
+
 	config EFI_IMAGES
 		bool "Build EFI GRUB images (Linux x86 or x86_64 host only)"
 		depends on TARGET_x86
@@ -262,22 +262,22 @@ menu "Target Images"
 		select TARGET_IMAGES_PAD
 		select PACKAGE_kmod-e1000
 		default y
-		
+
 	config VHD_IMAGES
 		bool "Build Hyper-V image files (VHD)"
 		depends on TARGET_x86 || TARGET_x86_64
-		default n
 		depends on GRUB_IMAGES || EFI_IMAGES
 		select TARGET_IMAGES_PAD
-		select PACKAGE_kmod-tulip		
-		
+		select PACKAGE_kmod-tulip
+		default n
+
  	config QCOW2_IMAGES
 		bool "Build PVE/KVM image files (QCOW2)"
 		depends on TARGET_x86 || TARGET_x86_64
-		default n
 		depends on GRUB_IMAGES || EFI_IMAGES
 		select TARGET_IMAGES_PAD
-		select PACKAGE_kmod-e1000	
+		select PACKAGE_kmod-e1000
+		default n
 
 	config TARGET_IMAGES_PAD
 		bool "Pad images to filesystem size (for JFFS2)"
@@ -297,7 +297,7 @@ menu "Target Images"
 		int "Kernel partition size (in MB)"
 		depends on GRUB_IMAGES || EFI_IMAGES || USES_BOOT_PART
 		default 8 if TARGET_apm821xx_sata
-		default 64 if TARGET_brcm2708
+		default 64 if TARGET_bcm27xx
 		default 16
 
 	config TARGET_ROOTFS_PARTSIZE

config/Config-kernel.in

@@ -565,7 +565,7 @@ if KERNEL_CGROUPS
 
 		config KERNEL_BLK_DEV_THROTTLING
 			bool "Enable throttling policy"
-			default y if TARGET_brcm2708
+			default y if TARGET_bcm27xx
 
 		config KERNEL_BLK_DEV_THROTTLING_LOW
 			bool "Block throttling .low limit interface support (EXPERIMENTAL)"

package/firmware/cypress-firmware/Makefile

@@ -17,7 +17,7 @@ PKG_SOURCE:=cypress-fmac-$(PKG_VERSION).zip
 PKG_SOURCE_URL:=https://community.cypress.com/servlet/JiveServlet/download/19000-1-51721/
 PKG_HASH:=a5510f82aacf585b5d29732b6d6777d4a4b26a667154d91cfcfc0d6d5dc4fef5
 
-PKG_MAINTAINER:=?lvaro Fern?ndez Rojas <noltari@gmail.com>
+PKG_MAINTAINER:=Álvaro Fernández Rojas <noltari@gmail.com>
 
 include $(INCLUDE_DIR)/package.mk
 

package/firmware/cypress-nvram/Makefile

@@ -34,7 +34,7 @@ endef
 define Package/cypress-nvram-43430-sdio-rpi-3b
   $(Package/cypress-nvram-default)
   TITLE:=CYW43430 NVRAM for Raspberry Pi 3B
-  DEPENDS:=@TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
 endef
 
 define Package/cypress-nvram-43430-sdio-rpi-3b/install
@@ -50,7 +50,7 @@ $(eval $(call BuildPackage,cypress-nvram-43430-sdio-rpi-3b))
 define Package/cypress-nvram-43430-sdio-rpi-zero-w
   $(Package/cypress-nvram-default)
   TITLE:=CYW43430 NVRAM for Raspberry Pi Zero W
-  DEPENDS:=@TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
 endef
 
 define Package/cypress-nvram-43430-sdio-rpi-zero-w/install
@@ -66,7 +66,7 @@ $(eval $(call BuildPackage,cypress-nvram-43430-sdio-rpi-zero-w))
 define Package/cypress-nvram-43455-sdio-rpi-3b-plus
   $(Package/cypress-nvram-default)
   TITLE:=CYW43455 NVRAM for Raspberry Pi 3B+
-  DEPENDS:=@TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
 endef
 
 define Package/cypress-nvram-43455-sdio-rpi-3b-plus/install
@@ -82,7 +82,7 @@ $(eval $(call BuildPackage,cypress-nvram-43455-sdio-rpi-3b-plus))
 define Package/cypress-nvram-43455-sdio-rpi-4b
   $(Package/cypress-nvram-default)
   TITLE:=CYW43455 NVRAM for Raspberry Pi 4B
-  DEPENDS:=@TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
 endef
 
 define Package/cypress-nvram-43455-sdio-rpi-4b/install

package/kernel/bcm27xx-gpu-fw/Makefile

@@ -8,7 +8,7 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
-PKG_NAME:=brcm2708-gpu-fw
+PKG_NAME:=bcm27xx-gpu-fw
 PKG_VERSION:=2020-01-30
 PKG_RELEASE:=63bdbe0ea609a69f5c0a2212d608ef3d9915a7ad
 
@@ -133,16 +133,16 @@ define Download/start4x_elf
 endef
 $(eval $(call Download,start4x_elf))
 
-define Package/brcm2708-gpu-fw
+define Package/bcm27xx-gpu-fw
   SECTION:=boot
   CATEGORY:=Boot Loaders
-  DEPENDS:=@TARGET_brcm2708
-  TITLE:=brcm2708-gpu-fw
-  DEFAULT:=y if TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
+  TITLE:=bcm27xx-gpu-fw
+  DEFAULT:=y if TARGET_bcm27xx
 endef
 
-define Package/brcm2708-gpu-fw/description
- GPU and kernel boot firmware for brcm2708. 
+define Package/bcm27xx-gpu-fw/description
+ GPU and kernel boot firmware for bcm27xx.
 endef
 
 define Build/Prepare
@@ -168,7 +168,7 @@ define Build/Compile
 	true
 endef
 
-define Package/brcm2708-gpu-fw/install
+define Package/bcm27xx-gpu-fw/install
 	true
 endef
 
@@ -189,4 +189,4 @@ define Build/InstallDev
 	$(CP) $(PKG_BUILD_DIR)/fixup4x.dat $(KERNEL_BUILD_DIR)
 endef
 
-$(eval $(call BuildPackage,brcm2708-gpu-fw))
+$(eval $(call BuildPackage,bcm27xx-gpu-fw))

package/kernel/linux/modules/netdevices.mk

@@ -125,7 +125,7 @@ $(eval $(call KernelPackage,mii))
 define KernelPackage/mdio-gpio
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:= Supports GPIO lib-based MDIO busses
-  DEPENDS:=+kmod-libphy @GPIO_SUPPORT +(TARGET_armvirt||TARGET_brcm2708_bcm2708||TARGET_samsung||TARGET_tegra):kmod-of-mdio
+  DEPENDS:=+kmod-libphy @GPIO_SUPPORT +(TARGET_armvirt||TARGET_bcm27xx_bcm2708||TARGET_samsung||TARGET_tegra):kmod-of-mdio
   KCONFIG:= \
 	CONFIG_MDIO_BITBANG \
 	CONFIG_MDIO_GPIO
@@ -273,7 +273,7 @@ $(eval $(call KernelPackage,switch-rtl8306))
 define KernelPackage/switch-rtl8366-smi
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=Realtek RTL8366 SMI switch interface support
-  DEPENDS:=@GPIO_SUPPORT +kmod-swconfig +(TARGET_armvirt||TARGET_brcm2708_bcm2708||TARGET_samsung||TARGET_tegra):kmod-of-mdio
+  DEPENDS:=@GPIO_SUPPORT +kmod-swconfig +(TARGET_armvirt||TARGET_bcm27xx_bcm2708||TARGET_samsung||TARGET_tegra):kmod-of-mdio
   KCONFIG:=CONFIG_RTL8366_SMI
   FILES:=$(LINUX_DIR)/drivers/net/phy/rtl8366_smi.ko
   AUTOLOAD:=$(call AutoLoad,42,rtl8366_smi)

package/utils/bcm27xx-userland/Makefile

@@ -0,0 +1,64 @@
+#
+# Copyright (C) 2019 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=bcm27xx-userland
+PKG_VERSION:=42ec119e03eb8dffc7c83e2ac0e665e333abbef6
+PKG_RELEASE:=1
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=https://codeload.github.com/raspberrypi/userland/tar.gz/$(PKG_VERSION)?
+PKG_HASH:=cb0f1d653fdb9975783f30359277d9de2868607381e081796eac68745e3e8324
+
+PKG_FLAGS:=nonshared
+
+PKG_MAINTAINER:=Álvaro Fernández Rojas <noltari@gmail.com>
+
+CMAKE_INSTALL:=1
+CMAKE_OPTIONS+=-DVMCS_INSTALL_PREFIX=/usr
+
+ifeq ($(ARCH),aarch64)
+  CMAKE_OPTIONS+=-DARM64=ON
+else
+  CMAKE_OPTIONS+=-DARM64=OFF
+endif
+
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/cmake.mk
+
+TAR_OPTIONS:=--strip-components 1 $(TAR_OPTIONS)
+TAR_CMD=$(HOST_TAR) -C $(1) $(TAR_OPTIONS)
+
+define Package/bcm27xx-userland
+  SECTION:=utils
+  CATEGORY:=Utilities
+  DEPENDS:=@TARGET_bcm27xx
+  TITLE:=BCM27xx userland tools
+  DEFAULT:=y if TARGET_bcm27xx
+endef
+
+define Package/bcm27xx-userland/description
+  BCM27xx userland tools including vcgencmd and tvservice.
+endef
+
+define Package/bcm27xx-userland/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/dtparam $(1)/usr/bin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/dtoverlay $(1)/usr/bin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/tvservice $(1)/usr/bin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/vcgencmd $(1)/usr/bin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/vcmailbox $(1)/usr/bin
+
+	$(INSTALL_DIR) $(1)/usr/include
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/ $(1)/usr/
+
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/ $(1)/usr/
+endef
+
+$(eval $(call BuildPackage,bcm27xx-userland))

package/utils/bcm27xx-userland/patches/001-interface-vcms_host-cmake-fixes.patch

@@ -0,0 +1,11 @@
+--- a/interface/vmcs_host/CMakeLists.txt
++++ b/interface/vmcs_host/CMakeLists.txt
+@@ -24,7 +24,7 @@ if(NOT ARM64)
+ 
+ 	# ILCS pulls in EGL for the ILCS/EGL surface API support
+ 	target_link_libraries(vcilcs brcmEGL brcmGLESv2 khrn_client vchiq_arm vcos)
+-	set(INSTALL_TARGETS "${INSTALL_TARGETS} vcilcs")
++	set(INSTALL_TARGETS ${INSTALL_TARGETS} vcilcs)
+ endif()
+ 
+ # vchostif needs ilcore as well (vmcs_main pulls it in)

target/linux/bcm27xx/Makefile

@@ -8,7 +8,7 @@
 include $(TOPDIR)/rules.mk
 
 ARCH:=arm
-BOARD:=brcm2708
+BOARD:=bcm27xx
 BOARDNAME:=Broadcom BCM27xx
 FEATURES:=ext4 audio usb usbgadget display gpio fpu squashfs rootfs-part boot-part
 MAINTAINER:=Álvaro Fernández Rojas <noltari@gmail.com>
@@ -23,7 +23,7 @@ endef
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES += \
-	brcm2708-gpu-fw \
+	bcm27xx-gpu-fw \
 	kmod-usb-hid \
 	kmod-sound-core kmod-sound-arm-bcm2835 \
 	kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1 \

target/linux/bcm27xx/image/gen_rpi_sdcard_img.sh

@@ -24,3 +24,6 @@ ROOTFSSIZE="$(($4 / 512))"
 
 dd bs=512 if="$BOOTFS" of="$OUTPUT" seek="$BOOTOFFSET" conv=notrunc
 dd bs=512 if="$ROOTFS" of="$OUTPUT" seek="$ROOTFSOFFSET" conv=notrunc
+
+
+

target/linux/bcm27xx/modules.mk

@@ -5,4 +5,4 @@
 # See /LICENSE for more information.
 #
 
-include $(TOPDIR)/target/linux/brcm2708/modules/*.mk
+include $(TOPDIR)/target/linux/bcm27xx/modules/*.mk

target/linux/bcm27xx/modules/hwmon.mk

@@ -10,7 +10,7 @@ define KernelPackage/hwmon-raspberrypi
   KCONFIG:=CONFIG_SENSORS_RASPBERRYPI_HWMON
   FILES:=$(LINUX_DIR)/drivers/hwmon/raspberrypi-hwmon.ko
   AUTOLOAD:=$(call AutoLoad,60,raspberrypi-hwmon)
-  $(call AddDepends/hwmon,@TARGET_brcm2708)
+  $(call AddDepends/hwmon,@TARGET_bcm27xx)
 endef
 
 define KernelPackage/hwmon-raspberrypi/description
@@ -23,7 +23,7 @@ $(eval $(call KernelPackage,hwmon-raspberrypi))
 define KernelPackage/hwmon-rpi-poe-fan
   SUBMENU:=$(HWMON_MENU)
   TITLE:=Raspberry Pi PoE HAT fan
-  DEPENDS:=@TARGET_brcm2708 +kmod-hwmon-core
+  DEPENDS:=@TARGET_bcm27xx +kmod-hwmon-core
   KCONFIG:=CONFIG_SENSORS_RPI_POE_FAN
   FILES:=$(LINUX_DIR)/drivers/hwmon/rpi-poe-fan.ko
   AUTOLOAD:=$(call AutoProbe,rpi-poe-fan)

target/linux/bcm27xx/modules/i2c.mk

@@ -11,7 +11,7 @@ I2C_BCM2835_MODULES:=\
 define KernelPackage/i2c-bcm2835
   $(call i2c_defaults,$(I2C_BCM2835_MODULES),59)
   TITLE:=Broadcom BCM2835 I2C master controller driver
-  DEPENDS:=@TARGET_brcm2708 +kmod-i2c-core
+  DEPENDS:=@TARGET_bcm27xx +kmod-i2c-core
 endef
 
 define KernelPackage/i2c-bcm2835/description

target/linux/bcm27xx/modules/other.mk

@@ -13,7 +13,7 @@ define KernelPackage/pwm-bcm2835
     CONFIG_PWM_BCM2835
   FILES:=$(LINUX_DIR)/drivers/pwm/pwm-bcm2835.ko
   AUTOLOAD:=$(call AutoLoad,60,pwm-bcm2835)
-  DEPENDS:=@TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
 endef
 
 define KernelPackage/pwm-bcm2835/description
@@ -30,7 +30,7 @@ define KernelPackage/random-bcm2835
     CONFIG_HW_RANDOM_BCM2835
   FILES:=$(LINUX_DIR)/drivers/char/hw_random/bcm2835-rng.ko
   AUTOLOAD:=$(call AutoLoad,11,bcm2835-rng)
-  DEPENDS:=@TARGET_brcm2708 +kmod-random-core
+  DEPENDS:=@TARGET_bcm27xx +kmod-random-core
 endef
 
 define KernelPackage/random-bcm2835/description
@@ -46,7 +46,7 @@ define KernelPackage/smi-bcm2835
   KCONFIG:=CONFIG_BCM2835_SMI
   FILES:=$(LINUX_DIR)/drivers/misc/bcm2835_smi.ko
   AUTOLOAD:=$(call AutoLoad,20,bcm2835_smi)
-  DEPENDS:=@TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
 endef
 
 define KernelPackage/smi-bcm2835/description
@@ -63,7 +63,7 @@ define KernelPackage/smi-bcm2835-dev
   KCONFIG:=CONFIG_BCM2835_SMI_DEV
   FILES:=$(LINUX_DIR)/drivers/char/broadcom/bcm2835_smi_dev.ko
   AUTOLOAD:=$(call AutoLoad,21,bcm2835_smi_dev)
-  DEPENDS:=@TARGET_brcm2708 +kmod-smi-bcm2835
+  DEPENDS:=@TARGET_bcm27xx +kmod-smi-bcm2835
 endef
 
 define KernelPackage/smi-bcm2835-dev/description

target/linux/bcm27xx/modules/sound.mk

@@ -14,7 +14,7 @@ define KernelPackage/sound-arm-bcm2835
   FILES:= \
     $(LINUX_DIR)/drivers/staging/vc04_services/bcm2835-audio/snd-bcm2835.ko
   AUTOLOAD:=$(call AutoLoad,68,snd-bcm2835)
-  DEPENDS:=@TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
   $(call AddDepends/sound)
 endef
 
@@ -36,7 +36,7 @@ define KernelPackage/sound-soc-bcm2835-i2s
   FILES:= \
     $(LINUX_DIR)/sound/soc/bcm/snd-soc-bcm2835-i2s.ko
   AUTOLOAD:=$(call AutoLoad,68,snd-soc-bcm2835-i2s)
-  DEPENDS:=@TARGET_brcm2708 +kmod-sound-soc-core
+  DEPENDS:=@TARGET_bcm27xx +kmod-sound-soc-core
   $(call AddDepends/sound)
 endef
 

target/linux/bcm27xx/modules/spi.mk

@@ -14,7 +14,7 @@ define KernelPackage/spi-bcm2835
     CONFIG_SPI_MASTER=y
   FILES:=$(LINUX_DIR)/drivers/spi/spi-bcm2835.ko
   AUTOLOAD:=$(call AutoLoad,89,spi-bcm2835)
-  DEPENDS:=@TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
 endef
 
 define KernelPackage/spi-bcm2835/description
@@ -33,7 +33,7 @@ define KernelPackage/spi-bcm2835-aux
     CONFIG_SPI_MASTER=y
   FILES:=$(LINUX_DIR)/drivers/spi/spi-bcm2835aux.ko
   AUTOLOAD:=$(call AutoLoad,89,spi-bcm2835aux)
-  DEPENDS:=@TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
 endef
 
 define KernelPackage/spi-bcm2835-aux/description

target/linux/bcm27xx/modules/video.mk

@@ -13,7 +13,7 @@ define KernelPackage/camera-bcm2835
   FILES:= \
     $(LINUX_DIR)/drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko
   AUTOLOAD:=$(call AutoLoad,65,bcm2835-v4l2)
-  $(call AddDepends/video,@TARGET_brcm2708 +kmod-vchiq-mmal-bcm2835 +kmod-video-videobuf2)
+  $(call AddDepends/video,@TARGET_bcm27xx +kmod-vchiq-mmal-bcm2835 +kmod-video-videobuf2)
 endef
 
 define KernelPackage/camera-bcm2835/description
@@ -28,7 +28,7 @@ define KernelPackage/drm-vc4
   SUBMENU:=$(VIDEO_MENU)
   TITLE:=Broadcom VC4 Graphics
   DEPENDS:= \
-    @TARGET_brcm2708 +kmod-drm \
+    @TARGET_bcm27xx +kmod-drm \
     +kmod-sound-core \
     +kmod-sound-soc-core
   KCONFIG:= \
@@ -56,7 +56,7 @@ define KernelPackage/vc-sm-cma
     CONFIG_BCM_VC_SM_CMA
   FILES:= \
     $(LINUX_DIR)/drivers/staging/vc04_services/vc-sm-cma/vc-sm-cma.ko
-  $(call AddDepends/video,@TARGET_brcm2708)
+  $(call AddDepends/video,@TARGET_bcm27xx)
 endef
 
 define KernelPackage/vc-sm-cma/description
@@ -74,7 +74,7 @@ define KernelPackage/vchiq-mmal-bcm2835
     CONFIG_VIDEO_CODEC_BCM2835=n
   FILES:= \
     $(LINUX_DIR)/drivers/staging/vc04_services/vchiq-mmal/bcm2835-mmal-vchiq.ko
-  $(call AddDepends/video,@TARGET_brcm2708 +kmod-vc-sm-cma)
+  $(call AddDepends/video,@TARGET_bcm27xx +kmod-vc-sm-cma)
 endef
 
 define KernelPackage/vchiq-mmal-bcm2835/description