r8152: drop package

package/ctcgfw/r8152/Makefile

@@ -1,52 +0,0 @@
-#Download realtek r8152 linux driver from official site [https://www.realtek.com/en/component/zoo/category/network-interface-controllers-10-100-1000m-gigabit-ethernet-usb-3-0-software]
-#Unpack source file
-#Replace orginal Makefile with this file
-#Put this source to 'package' folder of OpenWRT/LEDE SDK
-#Build(make menuconfig, make defconfig, make)
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=r8152
-PKG_VERSION:=2.14
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=https://codeload.github.com/wget/realtek-r8152-linux/tar.gz/v$(PKG_VERSION)?
-PKG_HASH:=617c159eb72355c240be3f78971e5a01c9dffe5545a7ae76bb2bd87bb7a346ed
-
-PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/realtek-$(PKG_NAME)-linux-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/usb-net-rtl8152-vendor
-  TITLE:=Kernel module for USB-to-Ethernet Realtek convertors
-  SUBMENU:=USB Support
-  VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
-  DEPENDS:=+kmod-usb-net
-  CONFLICTS:=kmod-usb-net-rtl8152
-  FILES:= $(PKG_BUILD_DIR)/r8152.ko
-  AUTOLOAD:=$(call AutoProbe,r8152)
-endef
-
-define KernelPackage/usb-net-rtl8152-vendor/description
- Kernel module for Realtek RTL8152/RTL8153 Based USB Ethernet Adapters
-endef
-
-R8152_MAKEOPTS= -C $(PKG_BUILD_DIR) \
-		PATH="$(TARGET_PATH)" \
-		ARCH="$(LINUX_KARCH)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		TARGET="$(HAL_TARGET)" \
-		TOOLPREFIX="$(KERNEL_CROSS)" \
-		TOOLPATH="$(KERNEL_CROSS)" \
-		KERNELPATH="$(LINUX_DIR)" \
-		KERNELDIR="$(LINUX_DIR)" \
-		LDOPTS=" " \
-		DOMULTI=1
-
-define Build/Compile
-	+$(MAKE) $(PKG_JOBS) $(R8152_MAKEOPTS) modules
-endef
-
-$(eval $(call KernelPackage,usb-net-rtl8152-vendor))

package/ctcgfw/r8152/patches/100-add-LED-configuration-from-OF.patch

@@ -1,74 +0,0 @@
-From 82985725e071f2a5735052f18e109a32aeac3a0b Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sun, 26 Jul 2020 02:38:31 +0200
-Subject: [PATCH] add LED configuration from OF
-
-This adds the ability to configure the LED configuration register using
-OF. This way, the correct value for board specific LED configuration can
-be determined.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- r8152.c | 23 +++++++++++++++++++++++
- 1 file changed, 23 insertions(+)
-
---- a/r8152.c
-+++ b/r8152.c
-@@ -17,6 +17,7 @@
- #include <linux/mii.h>
- #include <linux/ethtool.h>
- #include <linux/usb.h>
-+#include <linux/of.h>
- #include <linux/crc32.h>
- #include <linux/if_vlan.h>
- #include <linux/uaccess.h>
-@@ -9736,6 +9737,22 @@ static void rtl_tally_reset(struct r8152
- 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data);
- }
- 
-+static int r8152_led_configuration(struct r8152 *tp)
-+{
-+	u32 led_data;
-+	int ret;
-+
-+	ret = of_property_read_u32(tp->udev->dev.of_node, "realtek,led-data",
-+								&led_data);
-+
-+	if (ret)
-+		return ret;
-+	
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_LEDSEL, led_data);
-+
-+	return 0;
-+}
-+
- static void r8152b_init(struct r8152 *tp)
- {
- 	u32 ocp_data;
-@@ -9797,6 +9814,8 @@ static void r8152b_init(struct r8152 *tp
- 	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
- 	ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
- 	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
-+
-+	r8152_led_configuration(tp);
- }
- 
- static void r8153_init(struct r8152 *tp)
-@@ -9937,6 +9956,8 @@ static void r8153_init(struct r8152 *tp)
- 		tp->coalesce = COALESCE_SLOW;
- 		break;
- 	}
-+
-+	r8152_led_configuration(tp);
- }
- 
- static void r8153b_init(struct r8152 *tp)
-@@ -10026,6 +10047,8 @@ static void r8153b_init(struct r8152 *tp
- 	rtl_tally_reset(tp);
- 
- 	tp->coalesce = 15000;	/* 15 us */
-+
-+	r8152_led_configuration(tp);
- }
- 
- static void r8153c_init(struct r8152 *tp)