sunxi: enable wifi module on Pine64 boards
The Pine64(+) and the SoPine64 baseboard has an optional BT+WiFi module, carrying an RTL8723BS. The wifi part is connected via SDIO, the BT part is connected via UART. The BT part requires additional code changes in the drivers so we'll skip that until 5.10. Aside from a DTS patch to enable the wifi module, add the required packages into the device definitions. [ 8.996970] RTL8723BS: module init start [ 9.000922] RTL8723BS: rtl8723bs v4.3.5.5_12290.20140916_BTCOEX20140507-4E40 [ 9.007965] RTL8723BS: rtl8723bs BT-Coex version = BTCOEX20140507-4E40 [ 9.014785] pnetdev = 000000009bdd5000 [ 9.047780] RTL8723BS: rtw_ndev_init(wlan0) [ 9.053349] RTL8723BS: module init ret =0 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
This commit is contained in:
parent
bb80b5a02d
commit
6ec43e6372
@ -76,6 +76,7 @@ TARGET_DEVICES += olimex_a64-olinuxino-emmc
|
||||
define Device/pine64_pine64-plus
|
||||
DEVICE_VENDOR := Pine64
|
||||
DEVICE_MODEL := Pine64+
|
||||
DEVICE_PACKAGES := kmod-rtl8723bs rtl8723bs-firmware
|
||||
$(Device/sun50i-a64)
|
||||
endef
|
||||
TARGET_DEVICES += pine64_pine64-plus
|
||||
@ -83,6 +84,7 @@ TARGET_DEVICES += pine64_pine64-plus
|
||||
define Device/pine64_sopine-baseboard
|
||||
DEVICE_VENDOR := Pine64
|
||||
DEVICE_MODEL := SoPine
|
||||
DEVICE_PACKAGES := kmod-rtl8723bs rtl8723bs-firmware
|
||||
$(Device/sun50i-a64)
|
||||
endef
|
||||
TARGET_DEVICES += pine64_sopine-baseboard
|
||||
|
||||
@ -0,0 +1,72 @@
|
||||
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
|
||||
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
|
||||
@@ -78,6 +78,11 @@
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
+
|
||||
+ wifi_pwrseq: wifi_pwrseq {
|
||||
+ compatible = "mmc-pwrseq-simple";
|
||||
+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
|
||||
+ };
|
||||
};
|
||||
|
||||
&ac_power_supply {
|
||||
@@ -138,6 +143,21 @@
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
+
|
||||
+&mmc1 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&mmc1_pins>;
|
||||
+ vmmc-supply = <®_dldo4>;
|
||||
+ vqmmc-supply = <®_eldo1>;
|
||||
+ mmc-pwrseq = <&wifi_pwrseq>;
|
||||
+ bus-width = <4>;
|
||||
+ non-removable;
|
||||
+ status = "okay";
|
||||
+
|
||||
+ rtl8723cs: wifi@1 {
|
||||
+ reg = <1>;
|
||||
+ };
|
||||
+};
|
||||
|
||||
&mmc2 {
|
||||
pinctrl-names = "default";
|
||||
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
|
||||
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
|
||||
@@ -73,6 +73,11 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
+
|
||||
+ wifi_pwrseq: wifi_pwrseq {
|
||||
+ compatible = "mmc-pwrseq-simple";
|
||||
+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
|
||||
+ };
|
||||
};
|
||||
|
||||
&codec {
|
||||
@@ -146,6 +151,21 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
+&mmc1 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&mmc1_pins>;
|
||||
+ vmmc-supply = <®_dldo4>;
|
||||
+ vqmmc-supply = <®_eldo1>;
|
||||
+ mmc-pwrseq = <&wifi_pwrseq>;
|
||||
+ bus-width = <4>;
|
||||
+ non-removable;
|
||||
+ status = "okay";
|
||||
+
|
||||
+ rtl8723cs: wifi@1 {
|
||||
+ reg = <1>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
&ohci0 {
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user