diff --git a/target/linux/mediatek/dts/mt7981b-abt-asr3000-ubootmod.dts b/target/linux/mediatek/dts/mt7981b-abt-asr3000-ubootmod.dts
index 22d63782e6..80c77df895 100644
--- a/target/linux/mediatek/dts/mt7981b-abt-asr3000-ubootmod.dts
+++ b/target/linux/mediatek/dts/mt7981b-abt-asr3000-ubootmod.dts
@@ -77,9 +77,6 @@
 };
 
 &eth {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-
 	status = "okay";
 
 	gmac0: mac@0 {
@@ -109,7 +106,7 @@
 };
 
 &mdio_bus {
-	switch: switch@0 {
+	switch: switch@1f {
 		compatible = "mediatek,mt7531";
 		reg = <31>;
 		reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
diff --git a/target/linux/mediatek/dts/mt7981b-cetron-ct3003-ubootmod.dts b/target/linux/mediatek/dts/mt7981b-cetron-ct3003-ubootmod.dts
index e5a8ff4997..57b0901aa7 100644
--- a/target/linux/mediatek/dts/mt7981b-cetron-ct3003-ubootmod.dts
+++ b/target/linux/mediatek/dts/mt7981b-cetron-ct3003-ubootmod.dts
@@ -61,9 +61,6 @@
 };
 
 &eth {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-
 	status = "okay";
 
 	gmac0: mac@0 {
@@ -83,7 +80,7 @@
 };
 
 &mdio_bus {
-	switch: switch@0 {
+	switch: switch@1f {
 		compatible = "mediatek,mt7531";
 		reg = <31>;
 		reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
diff --git a/target/linux/mediatek/dts/mt7981b-cmcc-a10-ubootmod.dts b/target/linux/mediatek/dts/mt7981b-cmcc-a10-ubootmod.dts
index 10f060c4ca..29f486108e 100644
--- a/target/linux/mediatek/dts/mt7981b-cmcc-a10-ubootmod.dts
+++ b/target/linux/mediatek/dts/mt7981b-cmcc-a10-ubootmod.dts
@@ -85,7 +85,7 @@
 };
 
 &mdio_bus {
-	switch: switch@0 {
+	switch: switch@1f {
 		compatible = "mediatek,mt7531";
 		reg = <31>;
 		reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
diff --git a/target/linux/mediatek/dts/mt7981b-cmcc-rax3000m.dts b/target/linux/mediatek/dts/mt7981b-cmcc-rax3000m.dts
index e9c850e85b..3f330f40fa 100644
--- a/target/linux/mediatek/dts/mt7981b-cmcc-rax3000m.dts
+++ b/target/linux/mediatek/dts/mt7981b-cmcc-rax3000m.dts
@@ -90,7 +90,7 @@
 };
 
 &mdio_bus {
-	switch: switch@0 {
+	switch: switch@1f {
 		compatible = "mediatek,mt7531";
 		reg = <31>;
 		reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
diff --git a/target/linux/mediatek/dts/mt7981b-cudy-wr3000-v1.dts b/target/linux/mediatek/dts/mt7981b-cudy-wr3000-v1.dts
index 7975d247b1..56e90b1722 100644
--- a/target/linux/mediatek/dts/mt7981b-cudy-wr3000-v1.dts
+++ b/target/linux/mediatek/dts/mt7981b-cudy-wr3000-v1.dts
@@ -112,7 +112,7 @@
 };
 
 &mdio_bus {
-	switch: switch@0 {
+	switch: switch@1f {
 		compatible = "mediatek,mt7531";
 		reg = <31>;
 		reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
diff --git a/target/linux/mediatek/dts/mt7981b-h3c-magic-nx30-pro.dts b/target/linux/mediatek/dts/mt7981b-h3c-magic-nx30-pro.dts
index a75f514636..e7c75d9c5e 100644
--- a/target/linux/mediatek/dts/mt7981b-h3c-magic-nx30-pro.dts
+++ b/target/linux/mediatek/dts/mt7981b-h3c-magic-nx30-pro.dts
@@ -81,7 +81,7 @@
 };
 
 &mdio_bus {
-	switch: switch@0 {
+	switch: switch@1f {
 		compatible = "mediatek,mt7531";
 		reg = <31>;
 		reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
diff --git a/target/linux/mediatek/dts/mt7981b-imou-lc-hx3001-ubootmod.dts b/target/linux/mediatek/dts/mt7981b-imou-lc-hx3001-ubootmod.dts
index fe7dace67a..0c21c9db70 100644
--- a/target/linux/mediatek/dts/mt7981b-imou-lc-hx3001-ubootmod.dts
+++ b/target/linux/mediatek/dts/mt7981b-imou-lc-hx3001-ubootmod.dts
@@ -77,9 +77,6 @@
 };
 
 &eth {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-
 	status = "okay";
 
 	gmac0: mac@0 {
@@ -103,7 +100,7 @@
 };
 
 &mdio_bus {
-	switch: switch@0 {
+	switch: switch@1f {
 		compatible = "mediatek,mt7531";
 		reg = <31>;
 		reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
diff --git a/target/linux/mediatek/dts/mt7981b-jcg-q30.dts b/target/linux/mediatek/dts/mt7981b-jcg-q30.dts
index a22919263d..d91b7959d4 100644
--- a/target/linux/mediatek/dts/mt7981b-jcg-q30.dts
+++ b/target/linux/mediatek/dts/mt7981b-jcg-q30.dts
@@ -59,9 +59,6 @@
 };
 
 &eth {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-
 	status = "okay";
 
 	gmac0: mac@0 {
@@ -81,7 +78,7 @@
 };
 
 &mdio_bus {
-	switch: switch@0 {
+	switch: switch@1f {
 		compatible = "mediatek,mt7531";
 		reg = <31>;
 		reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
diff --git a/target/linux/mediatek/dts/mt7981b-livinet-zr-3020.dts b/target/linux/mediatek/dts/mt7981b-livinet-zr-3020.dts
index 3d0934c999..c160766572 100644
--- a/target/linux/mediatek/dts/mt7981b-livinet-zr-3020.dts
+++ b/target/linux/mediatek/dts/mt7981b-livinet-zr-3020.dts
@@ -110,7 +110,7 @@
 };
 
 &mdio_bus {
-	switch: switch@0 {
+	switch: switch@1f {
 		compatible = "mediatek,mt7531";
 		reg = <31>;
 		reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
diff --git a/target/linux/mediatek/dts/mt7981b-qihoo-360t7-ubootmod.dts b/target/linux/mediatek/dts/mt7981b-qihoo-360t7-ubootmod.dts
index d1fe6f31ce..7891344b93 100644
--- a/target/linux/mediatek/dts/mt7981b-qihoo-360t7-ubootmod.dts
+++ b/target/linux/mediatek/dts/mt7981b-qihoo-360t7-ubootmod.dts
@@ -58,9 +58,6 @@
 };
 
 &eth {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-
 	status = "okay";
 
 	gmac0: mac@0 {
@@ -80,7 +77,7 @@
 };
 
 &mdio_bus {
-	switch: switch@0 {
+	switch: switch@1f {
 		compatible = "mediatek,mt7531";
 		reg = <31>;
 		reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
diff --git a/target/linux/mediatek/dts/mt7981b-qihoo-360t7.dts b/target/linux/mediatek/dts/mt7981b-qihoo-360t7.dts
index d897697ef2..cd6f6b30c3 100644
--- a/target/linux/mediatek/dts/mt7981b-qihoo-360t7.dts
+++ b/target/linux/mediatek/dts/mt7981b-qihoo-360t7.dts
@@ -74,7 +74,7 @@
 };
 
 &mdio_bus {
-	switch: switch@0 {
+	switch: switch@1f {
 		compatible = "mediatek,mt7531";
 		reg = <31>;
 		reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
diff --git a/target/linux/mediatek/dts/mt7981b-xiaomi-mi-router-wr30u.dtsi b/target/linux/mediatek/dts/mt7981b-xiaomi-mi-router-wr30u.dtsi
index 7ab94f3623..d09ae2a3e7 100644
--- a/target/linux/mediatek/dts/mt7981b-xiaomi-mi-router-wr30u.dtsi
+++ b/target/linux/mediatek/dts/mt7981b-xiaomi-mi-router-wr30u.dtsi
@@ -86,7 +86,7 @@
 };
 
 &mdio_bus {
-	switch: switch@0 {
+	switch: switch@1f {
 		compatible = "mediatek,mt7531";
 		reg = <31>;
 		reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
diff --git a/target/linux/mediatek/dts/mt7986a-acer-predator-w6.dts b/target/linux/mediatek/dts/mt7986a-acer-predator-w6.dts
index 35a2c30bb4..6bff786558 100644
--- a/target/linux/mediatek/dts/mt7986a-acer-predator-w6.dts
+++ b/target/linux/mediatek/dts/mt7986a-acer-predator-w6.dts
@@ -229,7 +229,7 @@
 		mxl,led-config = <0x0 0x0 0x370 0x80>;
 	};
 
-	switch: switch@0 {
+	switch: switch@1f {
 		compatible = "mediatek,mt7531";
 		reg = <31>;
 
diff --git a/target/linux/mediatek/dts/mt7986a-asus-tuf-ax4200.dts b/target/linux/mediatek/dts/mt7986a-asus-tuf-ax4200.dts
index ac854f10d1..2af18958bc 100644
--- a/target/linux/mediatek/dts/mt7986a-asus-tuf-ax4200.dts
+++ b/target/linux/mediatek/dts/mt7986a-asus-tuf-ax4200.dts
@@ -136,7 +136,7 @@
 		mxl,led-config = <0x03f0 0x0 0x0 0x0>;
 	};
 
-	switch: switch@0 {
+	switch: switch@1f {
 		compatible = "mediatek,mt7531";
 		reg = <31>;
 
@@ -361,4 +361,4 @@
 
 &usb_phy {
 	status = "okay";
-};
\ No newline at end of file
+};
diff --git a/target/linux/mediatek/dts/mt7986a-asus-tuf-ax6000.dts b/target/linux/mediatek/dts/mt7986a-asus-tuf-ax6000.dts
index 2e9114f99c..41e6d2471d 100644
--- a/target/linux/mediatek/dts/mt7986a-asus-tuf-ax6000.dts
+++ b/target/linux/mediatek/dts/mt7986a-asus-tuf-ax6000.dts
@@ -142,7 +142,7 @@
 		mxl,led-config = <0x03f0 0x0 0x0 0x0>;
 	};
 
-	switch: switch@0 {
+	switch: switch@1f {
 		compatible = "mediatek,mt7531";
 		reg = <31>;
 
@@ -379,4 +379,4 @@
 
 &usb_phy {
 	status = "okay";
-};
\ No newline at end of file
+};
diff --git a/target/linux/mediatek/dts/mt7986a-glinet-gl-mt6000.dts b/target/linux/mediatek/dts/mt7986a-glinet-gl-mt6000.dts
index 2be1907f63..fded507039 100644
--- a/target/linux/mediatek/dts/mt7986a-glinet-gl-mt6000.dts
+++ b/target/linux/mediatek/dts/mt7986a-glinet-gl-mt6000.dts
@@ -122,7 +122,7 @@
 			realtek,aldps-enable;
 		};
 
-		switch: switch@31 {
+		switch: switch@1f {
 			compatible = "mediatek,mt7531";
 			reg = <31>;
 			reset-gpios = <&pio 18 GPIO_ACTIVE_HIGH>;
diff --git a/target/linux/mediatek/dts/mt7986a-tplink-tl-xdr-common.dtsi b/target/linux/mediatek/dts/mt7986a-tplink-tl-xdr-common.dtsi
index 84eb8cf3fe..717acfec16 100644
--- a/target/linux/mediatek/dts/mt7986a-tplink-tl-xdr-common.dtsi
+++ b/target/linux/mediatek/dts/mt7986a-tplink-tl-xdr-common.dtsi
@@ -143,7 +143,7 @@
 		realtek,led-link-select = <0xa7 0x0 0x0>;
 	};
 
-	switch: switch@31 {
+	switch: switch@1f {
 		compatible = "mediatek,mt7531";
 		reg = <31>;
 		reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
diff --git a/target/linux/mediatek/dts/mt7986a-xiaomi-redmi-router-ax6000.dtsi b/target/linux/mediatek/dts/mt7986a-xiaomi-redmi-router-ax6000.dtsi
index 9ae4418429..573d7ac23c 100644
--- a/target/linux/mediatek/dts/mt7986a-xiaomi-redmi-router-ax6000.dtsi
+++ b/target/linux/mediatek/dts/mt7986a-xiaomi-redmi-router-ax6000.dtsi
@@ -72,7 +72,7 @@
 };
 
 &mdio {
-	switch: switch@0 {
+	switch: switch@1f {
 		compatible = "mediatek,mt7531";
 		reg = <31>;
 		reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
diff --git a/target/linux/mediatek/dts/mt7986b-mercusys-mr90x-v1.dts b/target/linux/mediatek/dts/mt7986b-mercusys-mr90x-v1.dts
index e42b2c47c3..31a96cf790 100644
--- a/target/linux/mediatek/dts/mt7986b-mercusys-mr90x-v1.dts
+++ b/target/linux/mediatek/dts/mt7986b-mercusys-mr90x-v1.dts
@@ -120,7 +120,7 @@
 		reg = <6>;
 	};
 
-	switch: switch@0 {
+	switch: switch@1f {
 		compatible = "mediatek,mt7531";
 		reg = <31>;
 		reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
diff --git a/target/linux/mediatek/files-5.15/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts b/target/linux/mediatek/files-5.15/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
index 1d3c575b7d..d326c416a9 100644
--- a/target/linux/mediatek/files-5.15/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
+++ b/target/linux/mediatek/files-5.15/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
@@ -200,7 +200,7 @@
 };
 
 &mdio {
-	switch: switch@31 {
+	switch: switch@1f {
 		compatible = "mediatek,mt7531";
 		reg = <31>;
 		interrupt-controller;
diff --git a/target/linux/mediatek/files-5.15/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dtsi b/target/linux/mediatek/files-5.15/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dtsi
index 1ab56e37f7..26d560bd4b 100644
--- a/target/linux/mediatek/files-5.15/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dtsi
+++ b/target/linux/mediatek/files-5.15/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dtsi
@@ -99,7 +99,7 @@
 		reg = <6>;
 	};
 
-	switch: switch@0 {
+	switch: switch@1f {
 		compatible = "mediatek,mt7531";
 		reg = <31>;
 		reset-gpios = <&pio 5 0>;
diff --git a/target/linux/mediatek/files-5.15/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/target/linux/mediatek/files-5.15/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
index 83d5191671..8cd094f7c3 100644
--- a/target/linux/mediatek/files-5.15/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
+++ b/target/linux/mediatek/files-5.15/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -108,7 +108,7 @@
 			phy-mode = "2500base-x";
 		};
 
-		switch@0 {
+		switch@1f {
 			compatible = "mediatek,mt7531";
 			reg = <31>;
 			reset-gpios = <&pio 5 0>;