@ -0,0 +1,851 @@
#!/bin/sh
# 读取设置文件
function get_config(){
serverchan_enable=`uci get serverchan.serverchan.serverchan_enable`>/dev/null 2>&1
serverchan_sckey=`uci get serverchan.serverchan.sckey`>/dev/null 2>&1
serverchan_ip=`uci get serverchan.serverchan.serverchan_ip`>/dev/null 2>&1
serverchan_up=`uci get serverchan.serverchan.serverchan_up`>/dev/null 2>&1
serverchan_down=`uci get serverchan.serverchan.serverchan_down`>/dev/null 2>&1
serverchan_sheep=`uci get serverchan.serverchan.serverchan_sheep`>/dev/null 2>&1
if [ -z "$serverchan_sheep" ] ; then serverchan_sheep="0";fi
serverchan_whitelist=`uci get serverchan.serverchan.serverchan_whitelist` >/dev/null 2>&1
serverchan_blacklist=`uci get serverchan.serverchan.serverchan_blacklist` >/dev/null 2>&1
serverchan_interface=`uci get serverchan.serverchan.serverchan_interface` >/dev/null 2>&1
device_aliases=`uci get serverchan.serverchan.device_aliases` >/dev/null 2>&1
device_aliases=`echo $device_aliases | sed 's/ /\n/g' | sed 's/-/ /g'`
starttime=`uci get serverchan.serverchan.starttime` >/dev/null 2>&1
endtime=`uci get serverchan.serverchan.endtime` >/dev/null 2>&1
#sleeptime=`uci get serverchan.serverchan.serverchan_sleeptime` >/dev/null 2>&1
#if [ -z "$sleeptime" ] ; then sleeptime="60";fi
sleeptime=60
cpuload_enable=`uci get serverchan.serverchan.cpuload_enable` >/dev/null 2>&1
cpuload=`uci get serverchan.serverchan.cpuload` >/dev/null 2>&1
temperature_enable=`uci get serverchan.serverchan.temperature_enable` >/dev/null 2>&1
temperature=`uci get serverchan.serverchan.temperature` >/dev/null 2>&1
dir="/tmp/serverchan/"
debuglevel=`uci get serverchan.serverchan.debuglevel` >/dev/null 2>&1
#debuglevel="5"
if [ -z "$debuglevel" ] ; then logfile="/dev/null";else logfile="/tmp/serverchan/server_chan.log";fi
if [ -z "$serverchan_enable" ] ; then echo "`date "+%H:%M:%S"` 【！！！】无法读取程序开关 " >> ${logfile};fi
#if [ -z "$serverchan_enable" ] || [ "$serverchan_enable" -eq "0" ] ; then echo "`date "+%H:%M:%S"` 【！！！】程序未启用，即将关闭 " >> ${logfile};fi
if [ -z "$serverchan_enable" ] || [ "$serverchan_enable" -eq "0" ] ; then exit;fi
if [ -z "$serverchan_sckey" ] ; then echo "`date "+%H:%M:%S"` 【！！！】无法读取 SCKEY" >> ${logfile};fi
if [ -z "$serverchan_sckey" ] ; then exit;fi
if [ -z "$serverchan_sckey" ] && [ "${#serverchan_sckey}" -lt "50" ] ; then echo "`date "+%H:%M:%S"` 【！！！】请填入正确的 SCKEY " >> ${logfile};fi
if [ -z "$serverchan_ip" ] || [ "$serverchan_ip" -ne "0" ] && [ "$serverchan_ip" -ne "1" ] ; then echo "`date "+%H:%M:%S"` 【！！！】无法读取 ip 变化通知 开关" >> ${logfile};fi
if [ -z "$serverchan_up" ] || [ "$serverchan_up" -ne "0" ] && [ "$serverchan_up" -ne "1" ] ; then echo "`date "+%H:%M:%S"` 【！！！】无法读取 设备上线提醒 开关" >> ${logfile};fi
if [ -z "$serverchan_down" ] || [ "$serverchan_down" -ne "0" ] && [ "$serverchan_down" -ne "1" ] ; then echo "`date "+%H:%M:%S"` 【！！！】无法读取 设备下线提醒 开关" >> ${logfile};fi
}
#等待 5s，
sleep 5
get_config
# 检测程序开关
function enable_detection(){
if [ "$1" ] ;then
for i in `seq 1 $1`
do
serverchan_enable=`uci get serverchan.serverchan.serverchan_enable`>/dev/null 2>&1
if [ -z "$serverchan_enable" ] || [ "$serverchan_enable" -eq "0" ] ; then kill -9 `pgrep -f serverchan`;fi
sleep 1
done
else
serverchan_enable=`uci get serverchan.serverchan.serverchan_enable`>/dev/null 2>&1
if [ -z "$serverchan_enable" ] || [ "$serverchan_enable" -eq "0" ] ; then kill -9 `pgrep -f serverchan`;fi
fi
}
# 初始化
function serverchan_init(){
mkdir -p ${dir}
network_enable="200"
rm -f ${dir}title >/dev/null 2>&1
rm -f ${dir}content >/dev/null 2>&1
rm -f ${dir}serverchan.lock >/dev/null 2>&1
Temperature_n=0
cpuload_n=0
send_enable=0
echo "`date "+%H:%M:%S"` 【初始化】载入配置文件" >> ${logfile}
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "`date "+%H:%M:%S"` 【初始化】工作目录为 $dir " >> ${logfile};fi
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "`date "+%H:%M:%S"` 【初始化】log 目录为 $logfile " >> ${logfile};fi
# 如果 “忽略列表 为空” 并且 “关注列表为空”
if [ -z "$serverchan_whitelist" ] && [ -z "$serverchan_blacklist" ] && [ -z "$serverchan_interface" ]; then
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "`date "+%H:%M:%S"` 【初始化】未启用 MAC 过滤" >> ${logfile};fi
# 如果 “忽略列表不为空”
elif [ ! -z "$serverchan_whitelist" ] ; then
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "`date "+%H:%M:%S"` 【初始化】忽略列表内设备" >> ${logfile};fi
# 如果 “关注列表不为空”
elif [ ! -z "$serverchan_blacklist" ] ; then
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "`date "+%H:%M:%S"` 【初始化】仅关注列表内设备" >> ${logfile};fi
# 如果 “仅关注接口选项打开”
elif [ ! -z "$serverchan_interface" ] ; then
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "`date "+%H:%M:%S"` 【初始化】仅关注接口内设备" >> ${logfile};fi
fi
}
serverchan_init
#创建计划任务
function serverchan_cron(){
send_mode=`uci get serverchan.serverchan.send_mode`>/dev/null 2>&1
if [ ! -z "$send_mode" ] ; then
if [ "$send_mode" -eq "1" ] ; then
regular_time=`uci get serverchan.serverchan.regular_time`>/dev/null 2>&1
if ( echo `crontab -l` | grep "serverchan" | grep -q " $regular_time " ); then
echo "" >/dev/null
elif ( echo `crontab -l` | grep -q "serverchan" ); then
crontab -l > conf && sed -i "/serverchan/d" conf && crontab conf && rm -f conf
crontab -l > conf && echo -e "0 $regular_time * * * /usr/bin/serverchan/serverchan send &" >> conf && crontab conf && rm -f conf
/etc/init.d/cron stop
/etc/init.d/cron start
else
crontab -l > conf && echo -e "0 $regular_time * * * /usr/bin/serverchan/serverchan send &" >> conf && crontab conf && rm -f conf
/etc/init.d/cron stop
/etc/init.d/cron start
fi
elif [ "$send_mode" -eq "2" ] ; then
interval_time=`uci get serverchan.serverchan.interval_time`>/dev/null 2>&1
if ( echo `crontab -l` | grep "serverchan" | grep -q "*/$interval_time " ); then
echo "" >/dev/null
elif ( echo `crontab -l` | grep -q "serverchan" ); then
crontab -l > conf && sed -i "/serverchan/d" conf && crontab conf && rm -f conf
crontab -l > conf && echo -e "0 */$interval_time * * * /usr/bin/serverchan/serverchan send &" >> conf && crontab conf && rm -f conf
/etc/init.d/cron stop
/etc/init.d/cron start
else
crontab -l > conf && echo -e "0 $regular_time * * * /usr/bin/serverchan/serverchan send &" >> conf && crontab conf && rm -f conf
/etc/init.d/cron stop
/etc/init.d/cron start
fi
fi
elif [ -z "$send_mode" ] ; then
if ( echo `crontab -l` | grep -q "serverchan" ); then
crontab -l > conf && sed -i "/serverchan/d" conf && crontab conf && rm -f conf
/etc/init.d/cron stop
/etc/init.d/cron start
fi
fi
}
serverchan_cron
#免打扰检测
function serverchan_disturb(){
if [ ! -z "$serverchan_sheep" ] && [ "$serverchan_sheep" -eq "1" ] && [ ! -z "$starttime" ] && [ ! -z "$endtime" ] ;then
if [ `date +%H` -ge $endtime -a $starttime -lt $endtime ] || [ `date +%H` -lt $starttime -a $starttime -lt $endtime ] || [ `date +%H` -lt $starttime -a `date +%H` -ge $endtime -a $starttime -gt $endtime ] ; then enable=1;else enable=0;fi
if [ "$enable" -eq "0" ] ;then
sheep_str=0
while [ $enable -eq "0" ] ;
do
if [ "$sheep_str" -eq "0" ] ; then
echo "`date "+%H:%M:%S"` 【免打扰】夜深了，该休息了" >> ${logfile}
sheep_str=1
fi
get_config
if [ `date +%H` -ge $endtime -a $starttime -lt $endtime ] || [ `date +%H` -lt $starttime -a $starttime -lt $endtime ] || [ `date +%H` -lt $starttime -a `date +%H` -ge $endtime -a $starttime -gt $endtime ] ; then
enable=1
else
enable=0
enable_detection 1
fi
continue
done
unset title
unset content
rm -f ${dir}title >/dev/null 2>&1
rm -f ${dir}content >/dev/null 2>&1
fi
fi
}
serverchan_disturb
#清理日志
function clean_log(){
logrow=$(grep -c "" ${logfile})
if [ $logrow -gt 500 ] ;then
#cat /dev/null > ${logfile}
sed -i '1,100d' ${logfile}
echo "`date "+%H:%M:%S"` 【清理】日志超出上限，删除前 100 条" >> ${logfile}
fi
}
if [ -f ${logfile} ] ; then clean_log;fi
#文件锁
function LockFile()
{
if [ ! -f "${dir}serverchan.lock" ] ; then
> ${dir}serverchan.lock
else
while [ -f "${dir}serverchan.lock" ] ;
do
#sleep 1
continue
done
LockFile
fi
}
#检测设备上线
function up(){
if [ ! -f "${dir}ipAddress" ] ; then > ${dir}ipAddress;fi
if [ "$1" ] ;then
send_enable=`uci get serverchan.serverchan.send_enable`>/dev/null 2>&1
local temp_send_enable="$send_enable"
grep -w -q $1 ${dir}ipAddress
if [ $? -ne 0 ] ; then
# 如果 ipAddress 文件中存在此ip， ，
ip_mac=$( cat /var/dhcp.leases | grep -w $1 |awk '{print $2}' | grep -v "^$" | sort -u )
if [ -z "$ip_mac" ] ; then ip_mac=$( cat /proc/net/arp | grep "0x2" | grep -w $1 | awk '{print $4}' | grep -v "^$" | sort -u );fi
if [ ! -z "$device_aliases" ] && [ ! -z "$ip_mac" ] && ( echo "$device_aliases" | grep -q -i $ip_mac ); then
ip_name=$( echo "$device_aliases" | grep -i $ip_mac |awk '{print $2}' | grep -v "^$" | sort -u )
else
ip_name=$( cat /var/dhcp.leases | grep -w $1 |awk '{print $4}' | grep -v "^$" | sort -u )
fi
if [ -z "$ip_mac" ] ; then ip_mac="未知设备";fi
if [ -z "$ip_name" ] ; then ip_name="未知设备";fi
local ip_ms=`echo $( arping -I $( cat /proc/net/arp | grep -w $1 | awk '{print $6}' | grep -v "^$" | sort -u ) -c 10 -f -w 3 $1)`
if ( ! echo ${ip_ms} | grep -q ms );then
local ip_ms=`ping -c 1 -w 2 $1`
if ( ! echo ${ip_ms} | grep -q ms );then
sleep 2
local ip_ms=`echo $( arping -I $( cat /proc/net/arp | grep -w $1 | awk '{print $6}' | grep -v "^$" | sort -u ) -c 10 -f -w 5 $1)`
fi
fi
send_enable=`uci get serverchan.serverchan.send_enable`>/dev/null 2>&1
if [ "$temp_send_enable" -ne "$send_enable" ] ; then return;fi
if ( echo ${ip_ms} | grep -q ms ); then
# 如果连接成功
LockFile
if ( echo "$ip_mac" | grep -q "未知设备" ) || ( echo "$ip_name" | grep -q "未知设备" ) ; then
for i in `seq 1 5`
do
echo "`date "+%H:%M:%S"` 获取 $1 $ip_mac 设备信息失败，重试中" >> ${logfile}
sleep 1
ip_mac=$( cat /var/dhcp.leases | grep -w $1 |awk '{print $2}' | grep -v "^$" | sort -u )
if [ -z "$ip_mac" ] ; then ip_mac=$( cat /proc/net/arp | grep "0x2" | grep -w $1 | awk '{print $4}' | grep -v "^$" | sort -u );fi
if [ ! -z "$device_aliases" ] && [ ! -z "$ip_mac" ] && ( echo "$device_aliases" | grep -q -i $ip_mac ); then
ip_name=$( echo "$device_aliases" | grep -i $ip_mac |awk '{print $2}' | grep -v "^$" | sort -u )
else
ip_name=$( cat /var/dhcp.leases | grep -w $1 |awk '{print $4}' | grep -v "^$" | sort -u )
fi
if [ ! -z "$ip_mac" ] && [ ! -z "$ip_name" ] ; then break;fi
done
fi
if [ -z "$ip_mac" ] ; then
ip_mac="未知设备"
echo "`date "+%H:%M:%S"` 获取 $1 mac 超时，暂停跳过" >> ${logfile}
fi
if [ -z "$ip_name" ] ; then
ip_name="未知设备"
echo "`date "+%H:%M:%S"` 获取 $1 设备名超时，暂停跳过" >> ${logfile}
fi
if [ ! -z "$send_enable" ] && [ "$send_enable" -ne 3 ] ; then
# 如果定时任务没有运行
if [ -f "${dir}title" ] ; then title=`cat ${dir}title` ;fi
if [ -f "${dir}content" ] ; then content=`cat ${dir}content` ;fi
if [ -z "$title" ] ; then
title="有人连接了你的路由器"
content="%0D%0A%0D%0A---%0D%0A%0D%0A####新设备连接%0D%0A%0D%0A"">$ip_name"
elif ( echo ${title} | grep -q "有人连接了你的路由器" ) ; then
title="有人连接了你的路由器"
content="%0D%0A%0D%0A"">$ip_name"
else
title="设备状态变化"
content="%0D%0A%0D%0A---%0D%0A%0D%0A####新设备连接%0D%0A%0D%0A"">$ip_name"
fi
#echo "$1 $( cat /var/dhcp.leases | grep -w $1 |awk '{print $2" "$4}' )" >> ${dir}ipAddress
echo "$1 $ip_mac $ip_name" >> ${dir}ipAddress
echo "`date "+%H:%M:%S"` 【微信推送】新设备 $ip_name $1 连接了">> ${logfile}
if [ ! -z "$serverchan_blacklist" ] ; then
if ( echo $serverchan_blacklist | grep -q -i $ip_mac ); then
title="你偷偷关注的设备上线了"
fi
fi
echo $title >${dir}title
echo -n $content >>${dir}content
else
# 如果定时任务运行
echo "`date "+%H:%M:%S"` 新设备 $ip_name $1 连接了" >> ${logfile}
echo "$1 $ip_mac $ip_name" >> ${dir}ipAddress
unset title
unset content
fi
else
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "`date "+%H:%M:%S"` 设备 $ip_name $1 连接失败" >> ${logfile};fi
fi
rm -f ${dir}serverchan.lock >/dev/null 2>&1
else
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -eq "5" ] ; then echo "`date "+%H:%M:%S"` $ip_name $1 已存在，跳过" >> ${logfile};fi
fi
unset ip_ms
fi
}
#检测设备下线
function down(){
if [ ! -f "${dir}ipAddress" ] ; then return;fi
if [ "$1" ] ;then
send_enable=`uci get serverchan.serverchan.send_enable`>/dev/null 2>&1
local temp_send_enable="$send_enable"
ip_mac=$( cat ${dir}ipAddress | grep -w $1 |awk '{print $2}' | grep -v "^$" | sort -u )
if [ -z "$ip_mac" ] ; then ip_mac=$( cat /proc/net/arp | grep "0x2" | grep -w $1 | awk '{print $4}' | grep -v "^$" | sort -u );fi
ip_name=$( cat ${dir}ipAddress | grep -w $1 |awk '{print $3}' | grep -v "^$" | sort -u )
if ( echo "$ip_mac" | grep -q "未知设备" ) || ( echo "$ip_name" | grep -q "未知设备" ) ; then
echo "`date "+%H:%M:%S"` $1 $ip_mac 无设备名，尝试重新读取" >> ${logfile}
sed -i "/$1/d" ${dir}ipAddress
ip_mac=$( cat /var/dhcp.leases | grep -w $1 |awk '{print $2}' | grep -v "^$" | sort -u )
if [ -z "$ip_mac" ] ; then ip_mac=$( cat /proc/net/arp | grep "0x2" | grep -w $1 | awk '{print $4}' | grep -v "^$" | sort -u );fi
if [ ! -z "$device_aliases" ] && [ ! -z "$ip_mac" ] && ( echo "$device_aliases" | grep -q -i $ip_mac ); then
ip_name=$( echo "$device_aliases" | grep -i $ip_mac |awk '{print $2}' | grep -v "^$" | sort -u )
else
ip_name=$( cat /var/dhcp.leases | grep -w $1 |awk '{print $4}' | grep -v "^$" | sort -u )
fi
if [ -z "$ip_mac" ] ; then ip_mac="未知设备";fi
if [ -z "$ip_name" ] ; then ip_name="未知设备";fi
echo "$1 $ip_mac $ip_name" >> ${dir}ipAddress
fi
local ip_ms=`echo $( arping -I $( cat /proc/net/arp | grep -w $1 | awk '{print $6}' | grep -v "^$" | sort -u ) -c 10 -f -w 3 $1)`
if ( ! echo ${ip_ms} | grep -q ms );then
local ip_ms=`ping -c 1 -w 2 $1`
if ( ! echo ${ip_ms} | grep -q ms );then
sleep 3
local ip_ms=`echo $( arping -I $( cat /proc/net/arp | grep -w $1 | awk '{print $6}' | grep -v "^$" | sort -u ) -c 10 -f -w 10 $1)`
fi
fi
send_enable=`uci get serverchan.serverchan.send_enable`>/dev/null 2>&1
if [ "$temp_send_enable" -ne "$send_enable" ] ; then return;fi
if ( echo ${ip_ms} | grep -q ms ); then
# 如果连接成功
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "`date "+%H:%M:%S"` 设备 $ip_name $1 依然坚挺" >> ${logfile};fi
else
# 如果连接失败
LockFile
if [ ! -z "$send_enable" ] && [ "$send_enable" -ne 3 ] && [ ! -z "$ip_ms" ] ; then
# 如果定时任务没有运行
if [ ! -z "$serverchan_down" ] && [ "$serverchan_down" -eq "1" ] ; then
# 如果打开了下线提醒
if [ -f "${dir}title" ] ; then title=`cat ${dir}title` ;fi
if [ -f "${dir}content" ] ; then content=`cat ${dir}content` ;fi
if [ -z "$title" ] ; then
title="设备离线通知"
content="%0D%0A%0D%0A---%0D%0A%0D%0A####设备断开连接%0D%0A%0D%0A"">$ip_name"
elif ( echo ${title} | grep -q "设备离线通知" ) ; then
title="设备离线通知"
content="%0D%0A%0D%0A"">$ip_name"
else
title="设备状态变化"
content="%0D%0A%0D%0A---%0D%0A%0D%0A####设备断开连接%0D%0A%0D%0A"">$ip_name"
fi
echo "`date "+%H:%M:%S"` 【微信推送】设备 $ip_name $1 断开连接 " >> ${logfile}
echo $title >${dir}title
echo -n $content >>${dir}content
fi
echo "`date "+%H:%M:%S"` 设备 $ip_name $1 断开连接 " >> ${logfile}
sed -i "/$1/d" ${dir}ipAddress
unset title
unset content
fi
rm -f ${dir}serverchan.lock >/dev/null 2>&1
fi
unset ip_ms
fi
}
#发送定时数据
function send(){
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "`date "+%H:%M:%S"` 创建定时任务" >> ${logfile};fi
uci set serverchan.serverchan.send_enable=3
uci commit serverchan
unset title
unset content
send_content=""
serverchan_cron
send_title=`uci get serverchan.serverchan.send_title` >/dev/null 2>&1
if [ -z "$send_title" ] ; then send_title="OpenWrt By tty228 路由状态：";fi
router_status=`uci get serverchan.serverchan.router_status` >/dev/null 2>&1
if [ ! -z "$router_status" ] && [ "$router_status" -eq "1" ] ; then send_content=${send_content}"%0D%0A%0D%0A---%0D%0A%0D%0A#### 系统运行状态%0D%0A%0D%0A";fi
#if [ ! -z "$router_status" ] && [ "$router_status" -eq "1" ] ; then send_content=${send_content}"%0D%0A%0D%0A"" CPU占用：
if [ ! -z "$router_status" ] && [ "$router_status" -eq "1" ] ; then send_content=${send_content}"%0D%0A%0D%0A"" 平均负载：`cat /proc/loadavg | awk '{print $1" "$2" "$3}'`";fi
if [ ! -z "$router_status" ] && [ "$router_status" -eq "1" ] ; then send_content=${send_content}"%0D%0A%0D%0A"" 内存占用：`free -m | sed -n '2p' | awk '{print""($3/$2)*100"%"}'`";fi
if [ ! -z "$router_status" ] && [ "$router_status" -eq "1" ] ; then send_content=${send_content}"%0D%0A%0D%0A""`cat /proc/uptime| awk -F. '{run_days=$1 / 86400;run_hour=($1 % 86400)/3600;run_minute=($1 % 3600)/60;run_second=$1 % 60;printf(" 运行时间：%d天%d时%d分%d秒",run_days,run_hour,run_minute,run_second)}'`";fi
router_temp=`uci get serverchan.serverchan.router_temp` >/dev/null 2>&1
if [ ! -z "$router_temp" ] && [ "$router_temp" -eq "1" ] ; then send_content=${send_content}"%0D%0A%0D%0A""---%0D%0A%0D%0A#### 设备温度%0D%0A%0D%0A CPU：
router_wan=`uci get serverchan.serverchan.router_wan` >/dev/null 2>&1
send_wanIP=$(ubus call network.interface.wan status | grep '\"address\"' | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}')
send_hostIP=$(curl -k -s "http://members.3322.org/dyndns/getip")
if [ ! -z "$router_wan" ] && [ "$router_wan" -eq "1" ] ; then
send_content=${send_content}"%0D%0A%0D%0A""---%0D%0A%0D%0A#### WAN 口信息%0D%0A%0D%0A WAN ip：
send_content=${send_content}"%0D%0A%0D%0A"" 外网 ip：
if [ ! -z "$send_content" ] && [ ! -z "$router_wan" ] ; then
if ( ! echo ${send_wanIP} | grep -q ${send_hostIP} );then send_content=${send_content}"%0D%0A%0D%0A"" 外网 ip 与接口 ip 不一致，你的 ip 不是公网 ip";fi
else
send_content=${send_content}"%0D%0A%0D%0A"" ip 获取失败"
fi
send_content=${send_content}"%0D%0A%0D%0A""`ubus call network.interface.wan status | grep \"uptime\" | sed $'s/\"uptime": //g'| sed $'s/\,//g'| awk -F. '{run_days=$1 / 86400;run_hour=($1 % 86400)/3600;run_minute=($1 % 3600)/60;run_second=$1 % 60;printf(" 在线时间：%d天%d时%d分%d秒",run_days,run_hour,run_minute,run_second)}'`"
fi
client_list=`uci get serverchan.serverchan.client_list` >/dev/null 2>&1
if [ ! -z "$client_list" ] && [ "$client_list" -eq "1" ] ; then
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "`date "+%H:%M:%S"` 检测客户端列表" >> ${logfile};fi
if [ ! -f "${dir}ipAddress" ] ; then > ${dir}ipAddress;fi
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "`date "+%H:%M:%S"` 【连接】开始进行设备下线检测" >> ${logfile};fi
IPLIST=$( cat ${dir}ipAddress| awk '{print $1}' | grep -v "^$" | sort -u )
for ip in $IPLIST; do
if [ ! -z "$ip" ] ; then
down $ip &
fi
done
wait
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "`date "+%H:%M:%S"` 【连接】开始进行设备接入检测" >> ${logfile};fi
IPLISTrow=$(grep -c "" ${dir}ipAddress)
IPLIST=$( cat /proc/net/arp | grep "0x2" | awk '{print $1}' | grep -v "^$" | sort -u )
for ip in $IPLIST; do
if [ ! -z "$ip" ] ; then
up $ip &
fi
done
wait
if [ "$IPLISTrow" -eq $(grep -c "" ${dir}ipAddress) ] ; then echo "`date "+%H:%M:%S"` 没有新设备连接" >> ${logfile};fi
send_content=${send_content}"%0D%0A%0D%0A---%0D%0A%0D%0A#### 在线设备%0D%0A%0D%0A";
IPLIST=$( cat ${dir}ipAddress| awk '{print $1" "$3}' )
n=0
for ip in $IPLIST; do
n=$(($n+1))
if [ "${#ip}" -gt "20" ] ; then ip=`echo ${ip:0:20}"*"`;fi
[ $((n%2)) -eq 1 ] && send_content=${send_content}"%0D%0A%0D%0A"" $ip "
[ $((n%2)) -eq 0 ] && send_content=${send_content}"$ip"
done
fi
send_title=$( echo $send_title | sed $'s/\ /%20/g'| sed $'s/\"/%22/g'| sed $'s/\#/%23/g'| sed $'s/\&/%26/g'| sed $'s/\,/%2C/g'| sed $'s/\//%2F/g'| sed $'s/\:/%3A/g'| sed $'s/\;/%3B/g'| sed $'s/\=/%3D/g'| sed $'s/\@/%40/g')
#send_content=$( echo $send_content | sed $'s/\ /%20/g'| sed $'s/\"/%22/g'| sed $'s/\#/%23/g'| sed $'s/\&/%26/g'| sed $'s/\,/%2C/g'| sed $'s/\//%2F/g'| sed $'s/\:/%3A/g'| sed $'s/\;/%3B/g'| sed $'s/\=/%3D/g'| sed $'s/\@/%40/g')
#未转义 | sed $'s/\(/%28/g' | sed $'s/\)/%29/g' | sed $'s/\+/%2B/g' | sed $'s/\%/%25/g' | sed $'s/\</%3C/g' | sed $'s/\>/%3E/g' | sed $'s/\?/%3F/g' | sed $'s/\\/%5C/g' | sed $'s/\|/%7C/g'
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "`date "+%H:%M:%S"` 进行 URL 编码，标题=$send_title" >> ${logfile};fi
if [ -z "$send_content" ] ; then
send_content="%0D%0A%0D%0A---%0D%0A%0D%0A#### 我遇到了一个难题%0D%0A%0D%0A>你没有选择需要发送的项目，该怎么办呢%0D%0A%0D%0A---";
echo "`date "+%H:%M:%S"` 【！！！】定时发送选项错误，请检查你的设置" >> ${logfile}
fi
nowtime=`date "+%Y-%m-%d %H:%M:%S"`
curl -s "http://sc.ftqq.com/$serverchan_sckey.send?text=${send_title}" -d "&desp=${nowtime}%0D%0A%0D%0A${send_content}" >/dev/null
uci set serverchan.serverchan.send_enable=0
uci commit serverchan
echo "`date "+%H:%M:%S"` 【微信推送】定时发送状态消息" >> ${logfile}
exit
}
if [ "$1" ] ;then
if [ $1="send" ] ;then send;fi
exit
fi
#初始化在线设备列表
function serverchan_first(){
if [ ! -z "$serverchan_enable" ] && [ "$serverchan_enable" -eq "1" ] ; then
echo "`date "+%H:%M:%S"` 【初始化】初始化在线设备列表" >> ${logfile}
uci set serverchan.serverchan.send_enable=3
uci commit serverchan
IPLIST=$( cat /proc/net/arp | grep "0x2" | awk '{print $1}' | grep -v "^$" | sort -u )
> ${dir}ipAddress
for ip in $IPLIST; do
#忽略列表不检测
#只检测关注列表
# 如果 “ip 列表不为空”
if [ ! -z "$ip" ] ; then
ip_mac=$( cat /var/dhcp.leases | grep -w $ip |awk '{print $2}' | grep -v "^$" | sort -u )
if [ -z "$ip_mac" ] ; then ip_mac=$( cat /proc/net/arp | grep "0x2" | grep -w $ip | awk '{print $4}' | grep -v "^$" | sort -u );fi
if [ ! -z "$device_aliases" ] && [ ! -z "$ip_mac" ] && ( echo "$device_aliases" | grep -q -i $ip_mac ); then
ip_name=$( echo "$device_aliases" | grep -i $ip_mac |awk '{print $2}' | grep -v "^$" | sort -u )
else
ip_name=$( cat /var/dhcp.leases | grep -w $ip |awk '{print $4}' | grep -v "^$" | sort -u )
fi
if [ -z "$ip_name" ] ; then
temp_ms=`ping -c 1 -w 2 $ip` &
fi
if [ -z "$ip_mac" ] ; then ip_mac="未知设备";fi
if [ -z "$ip_name" ] ; then ip_name="未知设备";fi
# 如果 “忽略列表 为空” 并且 “关注列表为空”
if [ -z "$serverchan_whitelist" ] && [ -z "$serverchan_blacklist" ] && [ -z "$serverchan_interface" ]; then
up $ip &
# 如果 “忽略列表不为空”
elif [ ! -z "$serverchan_whitelist" ] ; then
if ( ! echo $serverchan_whitelist | grep -q -i $ip_mac ); then
up $ip &
else
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] && ( ! echo ${ip_mac} | grep -q "未知设备" ) ; then echo "`date "+%H:%M:%S"` 忽略列表已启用，跳过$ip_name $ip" >> ${logfile};fi
fi
# 如果 “关注列表不为空”
elif [ ! -z "$serverchan_blacklist" ] ; then
if ( echo $serverchan_blacklist | grep -q -i $ip_mac ); then
up $ip &
else
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] && ( ! echo ${ip_mac} | grep -q "未知设备" ) ; then echo "`date "+%H:%M:%S"` 关注列表已启用，跳过$ip_name $ip" >> ${logfile};fi
fi
# 如果 “仅关注接口选项打开”
elif [ ! -z "$serverchan_interface" ] ; then
if ( echo $serverchan_interface | grep -q -i $( cat /proc/net/arp | grep $ip |awk '{print $6}' | grep -v "^$" | sort -u )); then
up $ip &
else
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] && ( ! echo ${ip_mac} | grep -q "未知设备" ) ; then echo "`date "+%H:%M:%S"` 仅关注接口已启用，跳过$ip_name $ip" >> ${logfile};fi
fi
fi
fi
done
wait
uci set serverchan.serverchan.send_enable=0
uci commit serverchan
fi
}
serverchan_first
while [ "$serverchan_enable" -eq "1" ] ;
do
if [ -f ${logfile} ] ; then clean_log;fi
get_config
function rand_geturl(){
urllist="https://www.163.com https://www.qq.com https://www.baidu.com https://www.qidian.com https://www.douban.com"
url_str=$( echo "$urllist" | awk -v i="`awk 'BEGIN{srand();sum=rand()*5+ 1;printf("%d",sum)}'`" '{print $i}' )
check=`curl -k -s -w "%{http_code}" $url_str -A "Mozilla/5.0 (Windows NT 6.1) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11Mozilla/5.0 (Windows NT 6.1) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11" -o /dev/null`
}
rand_geturl
if [ -z "$check" ] || [ "$check" -ne "200" ] ; then sleep 1 && rand_geturl;fi
if [ ! -z "$check" ] && [ "$check" -eq "200" ] ; then
if [ ! -z "$network_enable" ] && [ "$network_enable" -eq "404" ] ; then echo "`date "+%H:%M:%S"` 【网络状态】网络恢复正常.." >> ${logfile};fi
network_enable="200"
#外网IP变化
if [ ! -z "$serverchan_ip" ] && [ "$serverchan_ip" -eq "1" ] ; then
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "`date "+%H:%M:%S"` 【外网IP】正在检测外网IP变化" >> ${logfile};fi
nowtime=`date "+%Y-%m-%d %H:%M:%S"`
#查询当前ip
#hostIP=$(curl -k -s "http://members.3322.org/dyndns/getip")
wanIP=$(ubus call network.interface.wan status | grep '\"address\"' | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}')
#查询ip历史记录
if [ -f ${dir}ip ] ; then lastIP=$( cat "${dir}ip");else unset lastIP;fi
if [ ! -z "$lastIP" ] ; then
#if [ "$wanIP"!="$lastIP" ] && [ ! -z "$wanIP" ] ; then
if [ ! -z "$wanIP" ] && ( echo ${wanIP} | grep -w -q ${lastIP} );then
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "`date "+%H:%M:%S"` IP 无变化，当前 ip 为 $lastIP" >> ${logfile};fi
else
echo "`date "+%H:%M:%S"` 当前 IP: ${wanIP}" >> ${logfile}
echo "`date "+%H:%M:%S"` 上次 IP: ${lastIP}" >> ${logfile}
echo "`date "+%H:%M:%S"` 【微信推送】当前IP：
echo -n $wanIP > ${dir}ip
if [ -f "${dir}title" ] ; then title=`cat ${dir}title` ;fi
if [ -f "${dir}content" ] ; then content=`cat ${dir}content` ;fi
if ( echo ${title} | grep -q "外网IP地址变化" ) || [ -z "$title" ] ; then
title="外网IP地址变化"
else
title="设备状态变化"
fi
content="%0D%0A%0D%0A---%0D%0A%0D%0A""####外网IP地址变化%0D%0A%0D%0A>当前IP：
echo $title >${dir}title
echo -n $content >>${dir}content
fi
else
echo "`date "+%H:%M:%S"` 【微信推送】路由器已经重启!当前IP：
echo "`date "+%H:%M:%S"` 当前IP: ${wanIP}" >> ${logfile}
echo -n $wanIP > ${dir}ip
if [ -f "${dir}title" ] ; then title=`cat ${dir}title` ;fi
if [ -f "${dir}content" ] ; then content=`cat ${dir}content` ;fi
if ( echo ${title} | grep -q "路由器重新启动" ) || [ -z "$title" ] ; then
title="路由器重新启动"
else
title="设备状态变化"
fi
content="%0D%0A%0D%0A---%0D%0A%0D%0A""####路由器重新启动%0D%0A%0D%0A>当前IP：
echo $title >${dir}title
echo -n $content >>${dir}content
fi
if [ -f ${logfile} ] ; then clean_log;fi
fi
#设备下线提醒
if [ ! -z "$serverchan_down" ] && [ "$serverchan_down" -eq "1" ] ; then
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "`date "+%H:%M:%S"` 【离线】开始进行设备下线检测" >> ${logfile};fi
fi
get_config
IPLIST=$( cat ${dir}ipAddress | awk '{print $1}' | grep -v "^$" | sort -u )
#从 ipAddress 文件中读取上次检测到的在线列表
for ip in $IPLIST; do
# 如果 ip 列表不为空
send_enable=`uci get serverchan.serverchan.send_enable`>/dev/null 2>&1
if [ ! -z "$ip" ] && [ "$send_enable" -ne 3 ] ; then
ip_mac=$( cat /var/dhcp.leases | grep -w $ip |awk '{print $2}' | grep -v "^$" | sort -u )
if [ -z "$ip_mac" ] ; then ip_mac=$( cat /proc/net/arp | grep "0x2" | grep -w $ip | awk '{print $4}' | grep -v "^$" | sort -u );fi
if [ ! -z "$device_aliases" ] && [ ! -z "$ip_mac" ] && ( echo "$device_aliases" | grep -q -i $ip_mac ); then
ip_name=$( echo "$device_aliases" | grep -i $ip_mac |awk '{print $2}' | grep -v "^$" | sort -u )
ipAddress_name=$( cat ${dir}ipAddress | grep -w $ip | awk '{print $3}' | grep -v "^$" | sort -u )
if [ ! -z ipAddress_name ] && ( ! echo $ip_name | grep -q $ipAddress_name ) ; then
sed -i "/$ip/d" ${dir}ipAddress
echo "$ip $ip_mac $ip_name" >> ${dir}ipAddress
fi
else
ip_name=$( cat /var/dhcp.leases | grep -w $ip |awk '{print $4}' | grep -v "^$" | sort -u )
fi
if [ -z "$ip_mac" ] ; then ip_mac="未知设备";fi
if [ -z "$ip_name" ] ; then ip_name="未知设备";fi
# 如果 “忽略列表 为空” 并且 “关注列表为空”
if [ -z "$serverchan_whitelist" ] && [ -z "$serverchan_blacklist" ] && [ -z "$serverchan_interface" ]; then
down $ip &
# 如果 “忽略列表不为空”
elif [ ! -z "$serverchan_whitelist" ] ; then
if ( ! echo $serverchan_whitelist | grep -q -i $ip_mac ); then
down $ip &
else
sed -i "/$ip/d" ${dir}ipAddress
fi
# 如果 “关注列表不为空”
elif [ ! -z "$serverchan_blacklist" ] ; then
if ( echo $serverchan_blacklist | grep -q -i $ip_mac ); then
down $ip &
else
sed -i "/$ip/d" ${dir}ipAddress
fi
# 如果 “仅关注接口选项打开”
elif [ ! -z "$serverchan_interface" ] ; then
if ( echo $serverchan_interface | grep -q -i $( cat /proc/net/arp | grep $ip |awk '{print $6}' | grep -v "^$" | sort -u )); then
down $ip &
else
sed -i "/$ip/d" ${dir}ipAddress
fi
fi
fi
done
wait
if [ -f "${dir}content" ] ; then content=`cat ${dir}content` ;fi
if [ -z "$content" ] || ( ! echo ${content} | grep -q "设备断开连接" ) ; then
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "`date "+%H:%M:%S"` 没有检测到设备离线" >> ${logfile};fi
fi
#fi
#新设备接入
if [ ! -z "$serverchan_up" ] && [ "$serverchan_up" -eq "1" ] ; then
get_config
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "`date "+%H:%M:%S"` 【连接】开始进行设备接入检测" >> ${logfile};fi
#从 arp 缓存中读取 0x2 在线列表
IPLIST=$( cat /proc/net/arp | grep "0x2" | awk '{print $1}' | grep -v "^$" | sort -u )
for ip in $IPLIST; do
# 如果 “ip 列表不为空”
send_enable=`uci get serverchan.serverchan.send_enable`>/dev/null 2>&1
if [ ! -z "$ip" ] && [ "$send_enable" -ne 3 ] ; then
ip_mac=$( cat /var/dhcp.leases | grep -w $ip |awk '{print $2}' | grep -v "^$" | sort -u )
if [ -z "$ip_mac" ] ; then ip_mac=$( cat /proc/net/arp | grep "0x2" | grep -w $ip | awk '{print $4}' | grep -v "^$" | sort -u );fi
if [ ! -z "$device_aliases" ] && [ ! -z "$ip_mac" ] && ( echo "$device_aliases" | grep -q -i $ip_mac ); then
ip_name=$( echo "$device_aliases" | grep -i $ip_mac |awk '{print $2}' | grep -v "^$" | sort -u )
else
ip_name=$( cat /var/dhcp.leases | grep -w $ip |awk '{print $4}' | grep -v "^$" | sort -u )
fi
if [ -z "$ip_name" ] ; then
temp_ms=`ping -c 1 -w 2 $ip` &
fi
if [ -z "$ip_mac" ] ; then ip_mac="未知设备";fi
if [ -z "$ip_name" ] ; then ip_name="未知设备";fi
# 如果 “忽略列表为空” 并且 “关注列表为空”
if [ -z "$serverchan_whitelist" ] && [ -z "$serverchan_blacklist" ] && [ -z "$serverchan_interface" ]; then
up $ip &
# 如果 “忽略列表不为空”
elif [ ! -z "$serverchan_whitelist" ] ; then
if ( ! echo $serverchan_whitelist | grep -q -i $ip_mac ); then
up $ip &
else
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] && ( ! echo ${ip_mac} | grep -q "未知设备" ) ; then echo "`date "+%H:%M:%S"` 忽略列表已启用，跳过$ip_name $ip" >> ${logfile};fi
fi
# 如果 “关注列表不为空”
elif [ ! -z "$serverchan_blacklist" ] ; then
if ( echo $serverchan_blacklist | grep -q -i $ip_mac ); then
up $ip &
else
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] && ( ! echo ${ip_mac} | grep -q "未知设备" ) ; then echo "`date "+%H:%M:%S"` 关注列表已启用，跳过$ip_name $ip" >> ${logfile};fi
fi
# 如果 “仅关注接口选项打开”
elif [ ! -z "$serverchan_interface" ] ; then
if ( echo $serverchan_interface | grep -q -i $( cat /proc/net/arp | grep $ip |awk '{print $6}' | grep -v "^$" | sort -u )); then
up $ip &
else
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] && ( ! echo ${ip_mac} | grep -q "未知设备" ) ; then echo "`date "+%H:%M:%S"` 仅关注接口已启用，跳过$ip_name $ip" >> ${logfile};fi
fi
fi
fi
done
wait
if [ -f "${dir}content" ] ; then content=`cat ${dir}content` ;fi
if [ -z "$content" ] || ( ! echo ${content} | grep -q "新设备连接" ) ; then
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "`date "+%H:%M:%S"` 没有新设备连接" >> ${logfile};fi
fi
fi
#负载状态报警
if [ ! -z "$cpuload_enable" ] && [ "$cpuload_enable" -eq "1" ] ; then
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "`date "+%H:%M:%S"` 【负载】正在检测 CPU 负载" >> ${logfile};fi
cpu_fuzai=`cat /proc/loadavg | awk '{print $1}'`
cpuload=`uci get serverchan.serverchan.cpuload`>/dev/null 2>&1
if [ ! -z "$cpuload" ] && [ `expr $cpu_fuzai \> $cpuload` -eq "1" ] ; then
cpuload_n=$(($cpuload_n+1))
echo "`date "+%H:%M:%S"` 【！！警报！！】当前 CPU 负载过高: ${cpu_fuzai}" >> ${logfile}
elif [ "$cpuload_n" -ge "5" ] ;then
cpuload_n=$(($cpuload_n+1))
else
cpuload_n=0
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "`date "+%H:%M:%S"` CPU 负载正常：$cpu_fuzai" >> ${logfile};fi
fi
if [ "$cpuload_n" -eq "5" ] ;then
if [ -f "${dir}title" ] ; then title=`cat ${dir}title` ;fi
if [ -f "${dir}content" ] ; then content=`cat ${dir}content` ;fi
if ( echo ${title} | grep -q "设备报警" ) || [ -z "$title" ] ; then
title="CPU 负载过高！"
else
title="设备报警！"
fi
echo "`date "+%H:%M:%S"` 【微信推送】当前 CPU 负载过高: ${cpu_fuzai}" >> ${logfile}
content="%0D%0A%0D%0A---%0D%0A%0D%0A""####CPU 负载过高%0D%0A%0D%0A>CPU 负载已连续五分钟超过预设%0D%0A%0D%0A>接下来一小时不再提示%0D%0A%0D%0A>当前负载：${cpu_fuzai}"
echo $title >${dir}title
echo -n $content >>${dir}content
elif [ "$cpuload_n" -ge "60" ] ;then
cpuload_n=0
fi
fi
#温度状态报警
if [ ! -z "$temperature_enable" ] && [ "$temperature_enable" -eq "1" ] ; then
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "`date "+%H:%M:%S"` 【温度】正在检测 CPU 温度" >> ${logfile};fi
cpu_wendu=`cut -c1-2 /sys/class/thermal/thermal_zone0/temp`
temperature=`uci get serverchan.serverchan.temperature`>/dev/null 2>&1
if [ ! -z "$temperature" ] && [ "$cpu_wendu" -gt "$temperature" ] ; then
Temperature_n=$(($Temperature_n+1))
echo "`date "+%H:%M:%S"` 【！！警报！！】当前 CPU 温度过高: ${cpu_wendu}" >> ${logfile}
elif [ "$Temperature_n" -ge "5" ] ;then
Temperature_n=$(($Temperature_n+1))
else
Temperature_n=0
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "`date "+%H:%M:%S"` CPU 温度正常：$cpu_wendu" >> ${logfile};fi
fi
if [ "$Temperature_n" -eq "5" ] ;then
if [ -f "${dir}title" ] ; then title=`cat ${dir}title` ;fi
if [ -f "${dir}content" ] ; then content=`cat ${dir}content` ;fi
if ( echo ${title} | grep -q "设备报警" ) || [ -z "$title" ] ; then
title="CPU 温度过高！"
else
title="设备报警！"
fi
echo "`date "+%H:%M:%S"` 【微信推送】当前 CPU 温度过高: ${cpu_wendu}" >> ${logfile}
content="%0D%0A%0D%0A---%0D%0A%0D%0A""####CPU 温度过高%0D%0A%0D%0A>CPU 温度已连续五分钟超过预设%0D%0A%0D%0A>接下来一小时不再提示%0D%0A%0D%0A>当前温度：${cpu_wendu}"
echo $title >${dir}title
echo -n $content >>${dir}content
elif [ "$Temperature_n" -ge "60" ] ;then
Temperature_n=0
fi
fi
else
if [ ! -z "$network_enable" ] && [ "$network_enable" -eq "200" ] ; then
echo "`date "+%H:%M:%S"` 【！！！！】当前网络不通！停止检测！ " >> ${logfile}
network_enable="404"
fi
enable_detection 60
continue
fi
send_enable=`uci get serverchan.serverchan.send_enable`>/dev/null 2>&1
if [ ! -z "$send_enable" ] && [ "$send_enable" -eq "3" ] ;then
send_str=0
while [ $send_enable -eq "3" ] ;
do
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] && [ "$send_str" -eq "0" ] ; then
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "-----------------------------------------------------" >> ${logfile};fi
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "`date "+%H:%M:%S"` 发送定时数据，程序暂停中" >> ${logfile};fi
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo ""-----------------------------------------------------"" >> ${logfile};fi
send_str=1
fi
enable_detection 60
send_enable=`uci get serverchan.serverchan.send_enable`>/dev/null 2>&1
continue
done
continue
fi
enable_detection
function serverchan_send(){
if [ -f "${dir}title" ] ; then title=`cat ${dir}title` ;fi
if [ -f "${dir}content" ] ; then content=`cat ${dir}content` ;fi
if [ ! -z "$title" ] && [ ! -z "$content" ] ; then
nowtime=`date "+%Y-%m-%d %H:%M:%S"`
curl -s "http://sc.ftqq.com/$serverchan_sckey.send?text=${title}" -d "&desp=${nowtime}%0D%0A%0D%0A${content}" >/dev/null
unset title
unset content
rm -f ${dir}title >/dev/null 2>&1
rm -f ${dir}content >/dev/null 2>&1
fi
if [ ! -z "$debuglevel" ] && [ "$debuglevel" -ne "1" ] ; then echo "`date "+%H:%M:%S"` 【等待】我累了，$sleeptime 秒后再回来" >> ${logfile};fi
enable_detection 60
serverchan_disturb
}
if [ ! -z "$serverchan_sheep" ] && [ "$serverchan_sheep" -eq "1" ] && [ ! -z "$starttime" ] && [ ! -z "$endtime" ] ;then
if [ `date +%H` -ge $endtime -a $starttime -lt $endtime ] || [ `date +%H` -lt $starttime -a $starttime -lt $endtime ] || [ `date +%H` -lt $starttime -a `date +%H` -ge $endtime -a $starttime -gt $endtime ] ; then
serverchan_send
else
serverchan_disturb
fi
else
serverchan_send
fi
continue
done
echo "`date "+%H:%M:%S"` 【！！！】程序未启用，退出脚本！" >> ${logfile}
exit
CN_SZTL