diff --git a/target/linux/ramips/dts/mt7620a_tplink_archer-c5-v4.dts b/target/linux/ramips/dts/mt7620a_tplink_archer-c5-v4.dts new file mode 100644 index 0000000000..9da04cdd74 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_tplink_archer-c5-v4.dts @@ -0,0 +1,205 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "tplink,archer-c5-v4", "ralink,mt7620a-soc"; + model = "TP-Link Archer C5 v4"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + label-mac-device = ðernet; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "archer-c5-v4:green:power"; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + }; + + wlan2g { + label = "archer-c5-v4:green:wlan2g"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + wlan5g { + label = "archer-c5-v4:green:wlan5g"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + wan { + label = "archer-c5-v4:green:wan"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + wan_orange { + label = "archer-c5-v4:orange:wan"; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "archer-c5-v4:green:lan"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + + usb { + label = "archer-c5-v4:green:usb"; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + wps { + label = "archer-c5-v4:green:wps"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + rfkill { + label = "rfkill"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + rtl8367s { + compatible = "realtek,rtl8367b"; + cpu_port = <7>; + realtek,extif2 = <1 0 1 1 1 1 1 1 2>; + mii-bus = <&mdio0>; + phy_id = <29>; + }; +}; + +&gpio2 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@20000 { + compatible = "tplink,firmware"; + label = "firmware"; + reg = <0x20000 0x7a0000>; + }; + + partition@7c0000 { + label = "config"; + reg = <0x7c0000 0x10000>; + read-only; + }; + + rom: partition@7d0000 { + label = "rom"; + reg = <0x7d0000 0x10000>; + read-only; + }; + + partition@7e0000 { + label = "romfile"; + reg = <0x7e0000 0x10000>; + read-only; + }; + + radio: partition@7f0000 { + label = "radio"; + reg = <0x7f0000 0x10000>; + read-only; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "ephy", "rgmii2"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + mtd-mac-address = <&rom 0xf100>; + pinctrl-0 = <&rgmii1_pins &mdio_pins>; + + port@5 { + status = "okay"; + mediatek,fixed-link = <1000 1 1 1>; + phy-mode = "rgmii"; + }; + + mdio0: mdio-bus { + status = "okay"; + reset-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + reset-delay-us = <10000>; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&wmac { + ralink,mtd-eeprom = <&radio 0>; + mtd-mac-address = <&rom 0xf100>; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&radio 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + mtd-mac-address = <&rom 0xf100>; + mtd-mac-address-increment = <2>; + }; +}; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index ee2b1aea48..f06390950e 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -1003,6 +1003,19 @@ define Device/tplink_archer-c2-v1 endef TARGET_DEVICES += tplink_archer-c2-v1 +define Device/tplink_archer-c5-v4 + $(Device/Archer) + TPLINK_FLASHLAYOUT := 8Mmtk + TPLINK_HWID := 0x04DA857C + TPLINK_HWREV := 0x0C000600 + TPLINK_HWREVADD := 0x04000000 + IMAGES += factory.bin + DEVICE_MODEL := Archer C5 + DEVICE_VARIANT := v4 + DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport kmod-mt76x2 kmod-switch-rtl8367b +endef +TARGET_DEVICES += tplink_archer-c5-v4 + define Device/tplink_archer-c50-v1 $(Device/tplink-v2) SOC := mt7620a diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds index ec86ed4b3f..581f613b2b 100755 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds @@ -194,6 +194,11 @@ tplink,archer-c20i) ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e" ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01" ;; +tplink,archer-c5-v4) + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch1" "0x0f" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch1" "0x10" + ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" "wlan1" + ;; tplink,archer-c50-v1) ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network index 74550ffdba..a56cc959b7 100755 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network @@ -207,6 +207,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan:3" "2:lan:4" "3:lan:1" "4:lan:2" "0:wan" "6@eth0" ;; + tplink,archer-c5-v4) + ucidef_add_switch "switch1" \ + "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "7@eth0" + ;; tplink,archer-mr200) ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "6t@eth0"