diff --git a/target/linux/rockchip/files/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/target/linux/rockchip/files/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
index 0c62193c67..7fcc801ffe 100644
--- a/target/linux/rockchip/files/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+++ b/target/linux/rockchip/files/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
@@ -95,6 +95,10 @@
 		     &gmac0_rx_bus2
 		     &gmac0_rgmii_clk
 		     &gmac0_rgmii_bus>;
+	snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
 	tx_delay = <0x3c>;
 	rx_delay = <0x2f>;
 	status = "okay";
@@ -106,9 +110,6 @@
 		reg = <1>;
 		pinctrl-0 = <&eth_phy0_reset_pin>;
 		pinctrl-names = "default";
-		reset-assert-us = <10000>;
-		reset-deassert-us = <50000>;
-		reset-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
 	};
 };
 
@@ -162,7 +163,7 @@
 &pinctrl {
 	gmac0 {
 		eth_phy0_reset_pin: eth-phy0-reset-pin {
-			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};