From 940a258a1a7c6d75e346ab8607b365524820b1b7 Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Sat, 2 Jan 2021 15:05:13 +0100 Subject: [PATCH] ath79: fix USB power GPIO for TP-Link TL-WR810N v1 The TP-Link TL-WR810N v1 is known to cause soft-brick on ath79 and work fine for ar71xx [1]. On closer inspection, the only apparent difference is the GPIO used for the USB regulator, which deviates between the two targets. This applies the value from ar71xx to ath79. Tested successfully by a forum user. [1] https://forum.openwrt.org/t/tp-link-tl-wr810n-v1-ath79/48267 Fixes: cdbf2de77768 ("ath79: Add support for TP-Link WR810N") Fixes: FS#3522 Signed-off-by: Adrian Schmutzler --- target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts b/target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts index 36f83809b8..6749479616 100644 --- a/target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts +++ b/target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts @@ -11,7 +11,7 @@ regulator-name = "usb_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; + gpio = <&gpio 11 GPIO_ACTIVE_HIGH>; enable-active-high; }; };