port-mirroring: add package

package/ctcgfw/port-mirroring/Makefile

@@ -0,0 +1,108 @@
+#
+# @file Makefile
+#
+# @author Akagi201
+# @date 2015/03/23
+#
+# OpenWrt feeds Makefile
+#
+
+##############################################
+# OpenWrt Makefile for port-mirroring program
+#
+#
+# Most of the variables used here are defined in
+# the include directives below. We just need to
+# specify a basic description of the package,
+# where to build our program, where to find
+# the source files, and where to install the
+# compiled program on the router.
+#
+# Be very careful of spacing in this file.
+# Indents should be tabs, not spaces, and
+# there should be no trailing whitespace in
+# lines that are not commented.
+#
+##############################################
+
+include $(TOPDIR)/rules.mk
+
+# Name and release number of this package
+PKG_NAME:=port-mirroring
+PKG_VERSION:=1.3
+PKG_RELEASE:=1
+
+# This specifies the directory where we're going to build the program.
+# The root build directory, $(BUILD_DIR), is by default the build_mipsel
+# directory in your OpenWrt SDK directory
+#PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+#PKG_SOURCE_URL:=http://port-mirroring.googlecode.com/files/
+#PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://github.com/Akagi201/port-mirroring.git
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_SOURCE_VERSION:=master
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+# Specify package information for this program.
+# The variables defined here should be self explanatory.
+# If you are running Kamikaze, delete the DESCRIPTION
+# variable below and uncomment the Kamikaze define
+# directive for the description below
+define Package/port-mirroring
+	SECTION:=net
+	CATEGORY:=Network
+	DEPENDS:=+libpcap +libpthread
+	TITLE:=port-mirroring tool
+	URL:=https://github.com/Akagi201/port-mirroring
+	MENU:=1
+endef
+
+define Package/port-mirroring/description
+	port-mirroring offers port mirror in a software.
+endef
+
+# Specify where and how to install the program. Since we only have one file,
+# the port-mirroring, install it by copying it to the /bin directory on
+# the router. The $(1) variable represents the root directory on the router running
+# OpenWrt. The $(INSTALL_DIR) variable contains a command to prepare the install
+# directory if it does not already exist.  Likewise $(INSTALL_BIN) contains the
+# command to copy the binary file from its current location (in our case the build
+# directory) to the install directory.
+define Package/port-mirroring/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/port-mirroring $(1)/usr/sbin/
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/port-mirroring.conf $(1)/etc/config/port-mirroring
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/port-mirroringd $(1)/etc/init.d/port_mirroring
+endef
+
+define Package/port-mirroring/postinst
+#!/bin/sh
+if [ -z "$${IPKG_INSTROOT}" ]; then
+	echo "Enabling rc.d symlink for port-mirroring"
+	/etc/init.d/port_mirroring enable
+fi
+exit 0
+endef
+
+define Package/port-mirroring/prerm
+#!/bin/sh
+# check if we are on real system
+if [ -z "$${IPKG_INSTROOT}" ]; then
+	echo "Removing rc.d symlink for port-mirroring"
+	/etc/init.d/port_mirroring disable
+fi
+exit 0
+endef
+
+# This line executes the necessary commands to compile our program.
+# The above define directives specify all the information needed, but this
+# line calls BuildPackage which in turn actually uses this information to
+# build a package.
+$(eval $(call BuildPackage,port-mirroring))