From abf73b0e66b33f621c80a86b7b9f75452f625c89 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 28 Nov 2020 12:08:42 +0100 Subject: [PATCH] ath79: add support for the Belkin F9K1115 v2 (AC1750 DB Wi-Fi) This device has (almost?) identical hardware to the F9J1108 v2 but uses a different firmware magic and model number. Specifications: SoC: QCA9558 CPU: 720 MHz Flash: 16 MiB NOR RAM: 128 MiB WiFi 2.4 GHz: QCA9558-AT4A 3x3 MIMO 802.11b/g/n WiFi 5 GHz: QCA9880-2R4E 3x3 MIMO 802.11a/n/ac Ethernet: 4x LAN and 1x WAN (all 1Gbit/s ports) USB: 1 x USB 2.0 (lower), 1 x USB 3.0 (upper) MAC addresses based on OEM firmware: Interface Address Location --------- ------- -------- lan *:5A sometimes in 0x6 wan *:5B 0x0 2.4Ghz *:5A 0x1002 5Ghz As per mini PCIe EEPROM Flashing instructions: The factory.bin can be flashed via the Belkin web UI or via the uboot HTTP upgrade page (which is by default listening on 192.168.2.1). Once the factory.bin has been written, sysupgrade.bin will work as usual. Signed-off-by: Martin Blumenstingl --- target/linux/ath79/dts/qca9558_belkin_f9k1115-v2.dts | 8 ++++++++ .../linux/ath79/generic/base-files/etc/board.d/02_network | 1 + target/linux/ath79/image/generic.mk | 8 ++++++++ 3 files changed, 17 insertions(+) create mode 100644 target/linux/ath79/dts/qca9558_belkin_f9k1115-v2.dts diff --git a/target/linux/ath79/dts/qca9558_belkin_f9k1115-v2.dts b/target/linux/ath79/dts/qca9558_belkin_f9k1115-v2.dts new file mode 100644 index 0000000000..aa5851c2e8 --- /dev/null +++ b/target/linux/ath79/dts/qca9558_belkin_f9k1115-v2.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9558_belkin_f9x-v2.dtsi" + +/ { + model = "Belkin F9K1115 v2 (AC 1750 DB)"; + compatible = "belkin,f9k1115-v2", "qca,qca9558"; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 5d8c470987..9336e8dbf2 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -113,6 +113,7 @@ ath79_setup_interfaces() "0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2" ;; belkin,f9j1108-v2|\ + belkin,f9k1115-v2|\ tplink,archer-c5-v1|\ tplink,archer-c7-v1|\ tplink,archer-c7-v2|\ diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 0bdd1c67b0..b0203f8ba7 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -433,6 +433,14 @@ define Device/belkin_f9j1108-v2 endef TARGET_DEVICES += belkin_f9j1108-v2 +define Device/belkin_f9k1115-v2 + $(Device/belkin_f9x-v2) + DEVICE_MODEL := F9K1115 v2 (AC1750 DB Wi-Fi) + EDIMAX_HEADER_MAGIC := eDiMaX + EDIMAX_HEADER_MODEL := F9K1115V2 +endef +TARGET_DEVICES += belkin_f9k1115-v2 + define Device/buffalo_bhr-4grv $(Device/buffalo_common) SOC := ar7242