diff --git a/include/rootfs.mk b/include/rootfs.mk
index 907a95a794..9fb7d8cfdf 100644
--- a/include/rootfs.mk
+++ b/include/rootfs.mk
@@ -47,6 +47,7 @@ apk = \
   IPKG_INSTROOT=$(1) \
   $(FAKEROOT) $(STAGING_DIR_HOST)/bin/apk \
 	--root $(1) \
+	--repositories-file /dev/zero \
 	--keys-dir $(TOPDIR) \
 	--no-cache \
 	--no-logfile \
@@ -111,7 +112,6 @@ define prepare_rootfs
 	)
 
 	@-find $(1) -name CVS -o -name .svn -o -name .git -o -name '.#*' | $(XARGS) rm -rf
-	@-find $(1)/usr/cache/apk/ -name '*.apk' -delete
 	rm -rf \
 		$(1)/boot \
 		$(1)/tmp/* \
diff --git a/package/boot/arm-trusted-firmware-mediatek/Makefile b/package/boot/arm-trusted-firmware-mediatek/Makefile
index 37d71e183c..84491b57b6 100644
--- a/package/boot/arm-trusted-firmware-mediatek/Makefile
+++ b/package/boot/arm-trusted-firmware-mediatek/Makefile
@@ -160,6 +160,14 @@ define Trusted-Firmware-A/mt7981-ram-ddr3
   DEFAULT:=TARGET_mediatek_filogic
 endef
 
+define Trusted-Firmware-A/mt7981-nor-ddr4
+  NAME:=MediaTek MT7981 (SPI-NOR, DDR4)
+  BOOT_DEVICE:=nor
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7981
+  DDR_TYPE:=ddr4
+endef
+
 define Trusted-Firmware-A/mt7981-emmc-ddr3
   NAME:=MediaTek MT7981 (eMMC, DDR3)
   BOOT_DEVICE:=emmc
@@ -203,6 +211,15 @@ define Trusted-Firmware-A/mt7986-ram-ddr4
   DEFAULT:=TARGET_mediatek_filogic
 endef
 
+define Trusted-Firmware-A/mt7981-spim-nand-ubi-ddr4
+  NAME:=MediaTek MT7981 (SPI-NAND via SPIM, DDR4)
+  BOOT_DEVICE:=spim-nand
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7981
+  DDR_TYPE:=ddr4
+  USE_UBI:=1
+endef
+
 define Trusted-Firmware-A/mt7986-nor-ddr4
   NAME:=MediaTek MT7986 (SPI-NOR, DDR4)
   BOOT_DEVICE:=nor
@@ -477,9 +494,11 @@ TFA_TARGETS:= \
 	mt7981-ram-ddr3 \
 	mt7981-emmc-ddr3 \
 	mt7981-nor-ddr3 \
+	mt7981-nor-ddr4 \
 	mt7981-sdmmc-ddr3 \
 	mt7981-snand-ddr3 \
 	mt7981-spim-nand-ddr3 \
+	mt7981-spim-nand-ubi-ddr4 \
 	mt7981-ram-ddr4 \
 	mt7981-emmc-ddr4 \
 	mt7981-spim-nand-ddr4 \
@@ -527,6 +546,7 @@ TFA_MAKE_FLAGS += \
 	$(if $(DRAM_USE_COMB),DRAM_USE_COMB=1) \
 	$(if $(RAM_BOOT_UART_DL),RAM_BOOT_UART_DL=1) \
 	$(if $(USE_UBI),UBI=1 $(if $(findstring mt7622,$(PLAT)),OVERRIDE_UBI_START_ADDR=0x80000)) \
+	$(if $(USE_UBI),UBI=1 $(if $(findstring mt7981,$(PLAT)),OVERRIDE_UBI_START_ADDR=0x100000)) \
 	all
 
 define Package/trusted-firmware-a-ram/install
diff --git a/package/boot/uboot-mediatek/Makefile b/package/boot/uboot-mediatek/Makefile
index 60aca27128..8827bcf8c2 100644
--- a/package/boot/uboot-mediatek/Makefile
+++ b/package/boot/uboot-mediatek/Makefile
@@ -279,6 +279,31 @@ define U-Boot/mt7981_nokia_ea0326gmp
   DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
 endef
 
+define U-Boot/mt7981_openwrt_one-snand
+  NAME:=OpenWrt One NAND
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=openwrt_one
+  UBOOT_CONFIG:=mt7981_openwrt-one-spi-nand
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand-ubi
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr4
+  DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ubi-ddr4
+endef
+
+define U-Boot/mt7981_openwrt_one-nor
+  NAME:=OpenWrt One NOR
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=openwrt_one
+  UBOOT_CONFIG:=mt7981_openwrt-one-nor
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=nor
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr4
+  FIP_COMPRESS:=1
+  DEPENDS:=+trusted-firmware-a-mt7981-nor-ddr4
+endef
+
 define U-Boot/mt7981_rfb-spim-nand
   NAME:=MT7981 Reference Board
   BUILD_SUBTARGET:=filogic
@@ -714,6 +739,8 @@ UBOOT_TARGETS := \
 	mt7981_h3c_magic-nx30-pro \
 	mt7981_jcg_q30-pro \
 	mt7981_nokia_ea0326gmp \
+	mt7981_openwrt_one-snand \
+	mt7981_openwrt_one-nor \
 	mt7981_rfb-spim-nand \
 	mt7981_rfb-emmc \
 	mt7981_rfb-nor \
diff --git a/package/boot/uboot-mediatek/patches/290-mt7981-add-USB-nodes.patch b/package/boot/uboot-mediatek/patches/290-mt7981-add-USB-nodes.patch
new file mode 100644
index 0000000000..574b541bfe
--- /dev/null
+++ b/package/boot/uboot-mediatek/patches/290-mt7981-add-USB-nodes.patch
@@ -0,0 +1,76 @@
+From cca5775031e4890f195246772e00f7f4ae7438f6 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Mon, 19 Feb 2024 05:52:24 +0100
+Subject: [PATCH 1/2] mt7981.dtsi: add USB nodes
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ arch/arm/dts/mt7981.dtsi | 47 ++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 47 insertions(+)
+
+diff --git a/arch/arm/dts/mt7981.dtsi b/arch/arm/dts/mt7981.dtsi
+index bda80ac9..6f4e5b9f 100644
+--- a/arch/arm/dts/mt7981.dtsi
++++ b/arch/arm/dts/mt7981.dtsi
+@@ -6,6 +6,7 @@
+ 
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
++#include <dt-bindings/phy/phy.h>
+ #include <dt-bindings/clock/mt7981-clk.h>
+ #include <dt-bindings/reset/mt7629-reset.h>
+ #include <dt-bindings/pinctrl/mt65xx.h>
+@@ -342,4 +343,50 @@
+ 		status = "disabled";
+ 	};
+ 
++	xhci: xhci@11200000 {
++		compatible = "mediatek,mt7981-xhci",
++			     "mediatek,mtk-xhci";
++		reg = <0x11200000 0x2e00>,
++		      <0x11203e00 0x0100>;
++		reg-names = "mac", "ippc";
++		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
++		phys = <&u2port0 PHY_TYPE_USB2>,
++		       <&u3port0 PHY_TYPE_USB3>;
++		clocks = <&infracfg_ao CK_INFRA_IUSB_SYS_CK>,
++			 <&infracfg_ao CK_INFRA_IUSB_CK>,
++			 <&infracfg_ao CK_INFRA_IUSB_133_CK>,
++			 <&infracfg_ao CK_INFRA_IUSB_66M_CK>,
++			 <&topckgen CK_TOP_U2U3_XHCI_SEL>;
++		clock-names = "sys_ck",
++			      "ref_ck",
++			      "mcu_ck",
++			      "dma_ck",
++			      "xhci_ck";
++		mediatek,u3p-dis-msk = <0x1>;
++		status = "okay";
++	};
++
++	usbtphy: usb-phy@11e10000 {
++		compatible = "mediatek,mt7981",
++			     "mediatek,generic-tphy-v2";
++		#address-cells = <1>;
++		#size-cells = <1>;
++		status = "okay";
++
++		u2port0: usb-phy@11e10000 {
++			reg = <0x11e10000 0x700>;
++			clocks = <&topckgen CK_TOP_USB_FRMCNT_SEL>;
++			clock-names = "ref";
++			#phy-cells = <1>;
++			status = "okay";
++		};
++
++		u3port0: usb-phy@11e10700 {
++			reg = <0x11e10700 0x900>;
++			clocks = <&topckgen CK_TOP_USB3_PHY_SEL>;
++			clock-names = "ref";
++			#phy-cells = <1>;
++			status = "okay";
++		};
++	};
+ };
+-- 
+2.34.1
+
diff --git a/package/boot/uboot-mediatek/patches/453-add-openwrt-one.patch b/package/boot/uboot-mediatek/patches/453-add-openwrt-one.patch
new file mode 100644
index 0000000000..25d2733d1c
--- /dev/null
+++ b/package/boot/uboot-mediatek/patches/453-add-openwrt-one.patch
@@ -0,0 +1,3949 @@
+--- /dev/null
++++ b/arch/arm/dts/openwrt-one.dts
+@@ -0,0 +1,203 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2024 John Crispin <john@phrozen.org>
++ */
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "OpenWrt One";
++	compatible = "openwrt,one", "mediatek,mt7981";
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x10000000>;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++
++		user {
++			label = "front";
++			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
++			linux,code = <BTN_0>;
++		};
++
++		reset {
++			label = "back";
++			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
++			linux,code = <BTN_1>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		red {
++			label = "red";
++			gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
++		};
++
++		white {
++			label = "white";
++			gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
++		};
++
++		green {
++			label = "green";
++			gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
++		};
++	};
++};
++
++&uart0 {
++	status = "okay";
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <1>;
++	phy-mode = "gmii";
++	phy-handle = <&phy0>;
++
++	phy0: eth-phy@0 {
++		compatible = "ethernet-phy-ieee802.3-c22";
++		reg = <0>;
++	};
++};
++
++&pinctrl {
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
++		};
++
++		conf-pd {
++			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
++		};
++	};
++
++	spi2_flash_pins: spi2-spi2-pins {
++		mux {
++			function = "spi";
++			groups = "spi2", "spi2_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
++		};
++
++		conf-pd {
++			pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
++		};
++	};
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "bl2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@200000 {
++				label = "ubi";
++				reg = <0x100000 0x7f00000>;
++			};
++		};
++	};
++};
++
++&spi2 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi2_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nor@0 {
++		compatible = "jedec,spi-nor";
++		reg = <0>;
++		spi-max-frequency = <5000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@00000 {
++				label = "bl2-nor";
++				reg = <0x00000 0x0040000>;
++			};
++
++			partition@40000 {
++				label = "factory";
++				reg = <0x40000 0x00C0000>;
++			};
++
++			partition@100000 {
++				label = "fip-nor";
++				reg = <0x100000 0x0080000>;
++			};
++
++			partition@180000 {
++				label = "recovery";
++				reg = <0x180000 0xc80000>;
++			};
++		};
++	};
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/configs/mt7981_openwrt-one-nor_defconfig
+@@ -0,0 +1,1811 @@
++#
++# Automatically generated file; DO NOT EDIT.
++# U-Boot 2024.01 Configuration
++#
++
++#
++# Compiler: aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.2.0 r26144+12-219018185e) 13.2.0
++#
++CONFIG_CREATE_ARCH_SYMLINK=y
++CONFIG_SYS_CACHE_SHIFT_6=y
++CONFIG_SYS_CACHELINE_SIZE=64
++CONFIG_LINKER_LIST_ALIGN=8
++# CONFIG_ARC is not set
++CONFIG_ARM=y
++# CONFIG_M68K is not set
++# CONFIG_MICROBLAZE is not set
++# CONFIG_MIPS is not set
++# CONFIG_NIOS2 is not set
++# CONFIG_PPC is not set
++# CONFIG_RISCV is not set
++# CONFIG_SANDBOX is not set
++# CONFIG_SH is not set
++# CONFIG_X86 is not set
++# CONFIG_XTENSA is not set
++CONFIG_SYS_ARCH="arm"
++CONFIG_SYS_CPU="armv8"
++CONFIG_SYS_SOC="mediatek"
++CONFIG_SYS_VENDOR="mediatek"
++CONFIG_SYS_BOARD="mt7981"
++CONFIG_SYS_CONFIG_NAME="mt7981"
++
++#
++# Skipping low level initialization functions
++#
++# CONFIG_SKIP_LOWLEVEL_INIT is not set
++# CONFIG_SKIP_LOWLEVEL_INIT_ONLY is not set
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_SYS_NONCACHED_MEMORY=0x100000
++# CONFIG_SYS_ICACHE_OFF is not set
++# CONFIG_SYS_DCACHE_OFF is not set
++
++#
++# ARM architecture
++#
++CONFIG_ARM64=y
++CONFIG_ARM64_CRC32=y
++CONFIG_COUNTER_FREQUENCY=0
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_INIT_SP_RELATIVE=y
++CONFIG_SYS_INIT_SP_BSS_OFFSET=524288
++# CONFIG_GIC_V3_ITS is not set
++CONFIG_STATIC_RELA=y
++CONFIG_DMA_ADDR_T_64BIT=y
++CONFIG_GPIO_EXTRA_HEADER=y
++CONFIG_ARM_ASM_UNIFIED=y
++# CONFIG_SYS_ARM_CACHE_CP15 is not set
++# CONFIG_SYS_ARM_MMU is not set
++# CONFIG_SYS_ARM_MPU is not set
++CONFIG_SYS_ARM_ARCH=8
++CONFIG_SYS_ARM_CACHE_WRITEBACK=y
++# CONFIG_SYS_ARM_CACHE_WRITETHROUGH is not set
++# CONFIG_SYS_ARM_CACHE_WRITEALLOC is not set
++# CONFIG_ARCH_CPU_INIT is not set
++CONFIG_SYS_ARCH_TIMER=y
++CONFIG_ARM_SMCCC=y
++# CONFIG_SYS_L2_PL310 is not set
++# CONFIG_SPL_SYS_L2_PL310 is not set
++# CONFIG_SYS_L2CACHE_OFF is not set
++# CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK is not set
++# CONFIG_USE_ARCH_MEMCPY is not set
++# CONFIG_USE_ARCH_MEMSET is not set
++CONFIG_ARM64_SUPPORT_AARCH32=y
++# CONFIG_ARCH_AT91 is not set
++# CONFIG_ARCH_DAVINCI is not set
++# CONFIG_ARCH_HISTB is not set
++# CONFIG_ARCH_KIRKWOOD is not set
++# CONFIG_ARCH_MVEBU is not set
++# CONFIG_ARCH_ORION5X is not set
++# CONFIG_TARGET_STV0991 is not set
++# CONFIG_ARCH_BCM283X is not set
++# CONFIG_ARCH_BCMSTB is not set
++# CONFIG_ARCH_BCMBCA is not set
++# CONFIG_TARGET_VEXPRESS_CA9X4 is not set
++# CONFIG_TARGET_BCMNS is not set
++# CONFIG_TARGET_BCMNS2 is not set
++# CONFIG_TARGET_BCMNS3 is not set
++# CONFIG_ARCH_EXYNOS is not set
++# CONFIG_ARCH_S5PC1XX is not set
++# CONFIG_ARCH_HIGHBANK is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_IPQ40XX is not set
++# CONFIG_ARCH_KEYSTONE is not set
++# CONFIG_ARCH_K3 is not set
++# CONFIG_ARCH_OMAP2PLUS is not set
++# CONFIG_ARCH_MESON is not set
++CONFIG_ARCH_MEDIATEK=y
++# CONFIG_ARCH_LPC32XX is not set
++# CONFIG_ARCH_IMX8 is not set
++# CONFIG_ARCH_IMX8M is not set
++# CONFIG_ARCH_IMX8ULP is not set
++# CONFIG_ARCH_IMX9 is not set
++# CONFIG_ARCH_IMXRT is not set
++# CONFIG_ARCH_MX23 is not set
++# CONFIG_ARCH_MX28 is not set
++# CONFIG_ARCH_MX31 is not set
++# CONFIG_ARCH_MX7ULP is not set
++# CONFIG_ARCH_MX7 is not set
++# CONFIG_ARCH_MX6 is not set
++# CONFIG_ARCH_MX5 is not set
++# CONFIG_ARCH_NEXELL is not set
++# CONFIG_ARCH_NPCM is not set
++# CONFIG_ARCH_APPLE is not set
++# CONFIG_ARCH_OWL is not set
++# CONFIG_ARCH_QEMU is not set
++# CONFIG_ARCH_RMOBILE is not set
++# CONFIG_ARCH_SNAPDRAGON is not set
++# CONFIG_ARCH_SOCFPGA is not set
++# CONFIG_ARCH_SUNXI is not set
++# CONFIG_ARCH_U8500 is not set
++# CONFIG_ARCH_VERSAL is not set
++# CONFIG_ARCH_VERSAL_NET is not set
++# CONFIG_ARCH_VF610 is not set
++# CONFIG_ARCH_ZYNQ is not set
++# CONFIG_ARCH_ZYNQMP_R5 is not set
++# CONFIG_ARCH_ZYNQMP is not set
++# CONFIG_ARCH_TEGRA is not set
++# CONFIG_ARCH_VEXPRESS64 is not set
++# CONFIG_TARGET_CORSTONE1000 is not set
++# CONFIG_TARGET_TOTAL_COMPUTE is not set
++# CONFIG_TARGET_LS2080A_EMU is not set
++# CONFIG_TARGET_LS1088AQDS is not set
++# CONFIG_TARGET_LS2080AQDS is not set
++# CONFIG_TARGET_LS2080ARDB is not set
++# CONFIG_TARGET_LS2081ARDB is not set
++# CONFIG_TARGET_LX2160ARDB is not set
++# CONFIG_TARGET_LX2160AQDS is not set
++# CONFIG_TARGET_LX2162AQDS is not set
++# CONFIG_TARGET_HIKEY is not set
++# CONFIG_TARGET_HIKEY960 is not set
++# CONFIG_TARGET_POPLAR is not set
++# CONFIG_TARGET_LS1012AQDS is not set
++# CONFIG_TARGET_LS1012ARDB is not set
++# CONFIG_TARGET_LS1012A2G5RDB is not set
++# CONFIG_TARGET_LS1012AFRWY is not set
++# CONFIG_TARGET_LS1012AFRDM is not set
++# CONFIG_TARGET_LS1028AQDS is not set
++# CONFIG_TARGET_LS1028ARDB is not set
++# CONFIG_TARGET_LS1088ARDB is not set
++# CONFIG_TARGET_LS1021AQDS is not set
++# CONFIG_TARGET_LS1021ATWR is not set
++# CONFIG_TARGET_PG_WCOM_SELI8 is not set
++# CONFIG_TARGET_PG_WCOM_EXPU1 is not set
++# CONFIG_TARGET_LS1021ATSN is not set
++# CONFIG_TARGET_LS1021AIOT is not set
++# CONFIG_TARGET_LS1043AQDS is not set
++# CONFIG_TARGET_LS1043ARDB is not set
++# CONFIG_TARGET_LS1046AQDS is not set
++# CONFIG_TARGET_LS1046ARDB is not set
++# CONFIG_TARGET_LS1046AFRWY is not set
++# CONFIG_TARGET_SL28 is not set
++# CONFIG_TARGET_TEN64 is not set
++# CONFIG_ARCH_UNIPHIER is not set
++# CONFIG_ARCH_SYNQUACER is not set
++# CONFIG_ARCH_STM32 is not set
++# CONFIG_ARCH_STI is not set
++# CONFIG_ARCH_STM32MP is not set
++# CONFIG_ARCH_ROCKCHIP is not set
++# CONFIG_ARCH_OCTEONTX is not set
++# CONFIG_ARCH_OCTEONTX2 is not set
++# CONFIG_TARGET_THUNDERX_88XX is not set
++# CONFIG_ARCH_ASPEED is not set
++# CONFIG_TARGET_DURIAN is not set
++# CONFIG_TARGET_POMELO is not set
++# CONFIG_TARGET_PRESIDIO_ASIC is not set
++# CONFIG_TARGET_XENGUEST_ARM64 is not set
++# CONFIG_ARCH_GXP is not set
++# CONFIG_STATIC_MACH_TYPE is not set
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_LEN=0x400000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_ENV_SOURCE_FILE=""
++CONFIG_SF_DEFAULT_SPEED=1000000
++CONFIG_SF_DEFAULT_MODE=0x0
++CONFIG_ENV_SIZE=0x8000
++CONFIG_DM_GPIO=y
++CONFIG_DEFAULT_DEVICE_TREE="openwrt-one"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_MULTI_DTB_FIT_UNCOMPRESS_SZ=0x8000
++CONFIG_DM_RESET=y
++CONFIG_SYS_MONITOR_LEN=0
++# CONFIG_MT8512 is not set
++# CONFIG_TARGET_MT7622 is not set
++# CONFIG_TARGET_MT7623 is not set
++# CONFIG_TARGET_MT7629 is not set
++CONFIG_TARGET_MT7981=y
++# CONFIG_TARGET_MT7986 is not set
++# CONFIG_TARGET_MT7988 is not set
++# CONFIG_TARGET_MT8183 is not set
++# CONFIG_TARGET_MT8512 is not set
++# CONFIG_TARGET_MT8516 is not set
++# CONFIG_TARGET_MT8518 is not set
++CONFIG_MTK_BROM_HEADER_INFO="media=snand;nandinfo=2k+64"
++CONFIG_RESET_BUTTON_LABEL="back"
++CONFIG_RESET_BUTTON_SETTLE_DELAY=0
++CONFIG_ERR_PTR_OFFSET=0x0
++# CONFIG_SPL is not set
++CONFIG_BOOTSTAGE_STASH_ADDR=0x0
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++# CONFIG_DEBUG_UART_BOARD_INIT is not set
++CONFIG_IDENT_STRING=""
++CONFIG_SYS_CLK_FREQ=0
++# CONFIG_CHIP_DIP_SCAN is not set
++# CONFIG_CMO_BY_VA_ONLY is not set
++# CONFIG_ARMV8_MULTIENTRY is not set
++# CONFIG_ARMV8_SET_SMPEN is not set
++# CONFIG_ARMV8_SWITCH_TO_EL1 is not set
++
++#
++# ARMv8 secure monitor firmware
++#
++# CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT is not set
++CONFIG_PSCI_RESET=y
++# CONFIG_ARMV8_PSCI is not set
++# CONFIG_ARMV8_EA_EL3_FIRST is not set
++# CONFIG_ARMV8_CRYPTO is not set
++# CONFIG_CMD_DEKBLOB is not set
++# CONFIG_IMX_CAAM_DEK_ENCAP is not set
++# CONFIG_IMX_OPTEE_DEK_ENCAP is not set
++# CONFIG_IMX_SECO_DEK_ENCAP is not set
++# CONFIG_IMX_ELE_DEK_ENCAP is not set
++# CONFIG_CMD_HDMIDETECT is not set
++CONFIG_IMX_DCD_ADDR=0x00910000
++CONFIG_SYS_MEM_TOP_HIDE=0x0
++CONFIG_SYS_LOAD_ADDR=0x46000000
++
++#
++# ARM debug
++#
++CONFIG_BUILD_TARGET=""
++# CONFIG_PCI is not set
++CONFIG_FWU_NUM_BANKS=2
++CONFIG_FWU_NUM_IMAGES_PER_BANK=2
++CONFIG_DEBUG_UART=y
++# CONFIG_AHCI is not set
++# CONFIG_OF_BOARD_FIXUP is not set
++
++#
++# Functionality shared between NXP SoCs
++#
++# CONFIG_NXP_ESBC is not set
++
++#
++# General setup
++#
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_CC_IS_GCC=y
++CONFIG_GCC_VERSION=130200
++CONFIG_CLANG_VERSION=0
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++# CONFIG_CC_OPTIMIZE_FOR_SPEED is not set
++# CONFIG_CC_OPTIMIZE_FOR_DEBUG is not set
++# CONFIG_OPTIMIZE_INLINING is not set
++CONFIG_ARCH_SUPPORTS_LTO=y
++# CONFIG_LTO is not set
++CONFIG_CC_HAS_ASM_INLINE=y
++# CONFIG_XEN is not set
++# CONFIG_ENV_VARS_UBOOT_CONFIG is not set
++# CONFIG_SYS_BOOT_GET_CMDLINE is not set
++# CONFIG_SYS_BOOT_GET_KBD is not set
++CONFIG_SYS_MALLOC_F=y
++# CONFIG_VALGRIND is not set
++CONFIG_EXPERT=y
++CONFIG_SYS_MALLOC_CLEAR_ON_INIT=y
++# CONFIG_SYS_MALLOC_DEFAULT_TO_INIT is not set
++# CONFIG_TOOLS_DEBUG is not set
++CONFIG_PHYS_64BIT=y
++CONFIG_FDT_64BIT=y
++# CONFIG_REMAKE_ELF is not set
++# CONFIG_HAS_BOARD_SIZE_LIMIT is not set
++# CONFIG_SYS_CUSTOM_LDSCRIPT is not set
++CONFIG_PLATFORM_ELFENTRY="_start"
++CONFIG_STACK_SIZE=0x1000000
++CONFIG_SYS_SRAM_BASE=0x0
++CONFIG_SYS_SRAM_SIZE=0x0
++# CONFIG_MP is not set
++CONFIG_HAVE_TEXT_BASE=y
++# CONFIG_HAVE_SYS_UBOOT_START is not set
++CONFIG_SYS_UBOOT_START=0x41e00000
++# CONFIG_DYNAMIC_SYS_CLK_FREQ is not set
++# CONFIG_API is not set
++
++#
++# Boot options
++#
++
++#
++# Boot images
++#
++# CONFIG_ANDROID_BOOT_IMAGE is not set
++# CONFIG_TIMESTAMP is not set
++CONFIG_FIT=y
++CONFIG_FIT_EXTERNAL_OFFSET=0x0
++CONFIG_FIT_FULL_CHECK=y
++# CONFIG_FIT_SIGNATURE is not set
++# CONFIG_FIT_CIPHER is not set
++# CONFIG_FIT_VERBOSE is not set
++# CONFIG_FIT_BEST_MATCH is not set
++CONFIG_FIT_PRINT=y
++# CONFIG_SPL_LOAD_FIT_FULL is not set
++CONFIG_PXE_UTILS=y
++CONFIG_BOOTSTD=y
++# CONFIG_BOOTSTD_FULL is not set
++# CONFIG_BOOTSTD_DEFAULTS is not set
++CONFIG_BOOTSTD_BOOTCOMMAND=y
++CONFIG_BOOTMETH_GLOBAL=y
++# CONFIG_BOOTMETH_CROS is not set
++CONFIG_BOOTMETH_EXTLINUX=y
++CONFIG_BOOTMETH_EXTLINUX_PXE=y
++CONFIG_BOOTMETH_EFILOADER=y
++CONFIG_BOOTMETH_VBE=y
++CONFIG_BOOTMETH_VBE_REQUEST=y
++CONFIG_BOOTMETH_VBE_SIMPLE=y
++CONFIG_BOOTMETH_VBE_SIMPLE_OS=y
++# CONFIG_BOOTMETH_SCRIPT is not set
++CONFIG_LEGACY_IMAGE_FORMAT=y
++# CONFIG_SUPPORT_RAW_INITRD is not set
++# CONFIG_CHROMEOS is not set
++# CONFIG_CHROMEOS_VBOOT is not set
++# CONFIG_RAMBOOT_PBL is not set
++CONFIG_SYS_BOOT_RAMDISK_HIGH=y
++# CONFIG_DISTRO_DEFAULTS is not set
++
++#
++# Boot timing
++#
++# CONFIG_BOOTSTAGE is not set
++CONFIG_BOOTSTAGE_STASH_SIZE=0x1000
++# CONFIG_SHOW_BOOT_PROGRESS is not set
++
++#
++# Boot media
++#
++CONFIG_NAND_BOOT=y
++# CONFIG_ONENAND_BOOT is not set
++# CONFIG_QSPI_BOOT is not set
++# CONFIG_SATA_BOOT is not set
++# CONFIG_SD_BOOT is not set
++# CONFIG_SD_BOOT_QSPI is not set
++CONFIG_SPI_BOOT=y
++
++#
++# Autoboot options
++#
++CONFIG_AUTOBOOT=y
++CONFIG_BOOTDELAY=2
++# CONFIG_AUTOBOOT_KEYED is not set
++# CONFIG_AUTOBOOT_USE_MENUKEY is not set
++CONFIG_AUTOBOOT_MENU_SHOW=y
++# CONFIG_BOOTMENU_DISABLE_UBOOT_CONSOLE is not set
++# CONFIG_BOOT_RETRY is not set
++
++#
++# Image support
++#
++# CONFIG_IMAGE_PRE_LOAD is not set
++
++#
++# Devicetree fixup
++#
++# CONFIG_OF_BOARD_SETUP is not set
++# CONFIG_OF_SYSTEM_SETUP is not set
++# CONFIG_OF_STDOUT_VIA_ALIAS is not set
++# CONFIG_FDT_FIXUP_PARTITIONS is not set
++# CONFIG_FDT_SIMPLEFB is not set
++CONFIG_ARCH_FIXUP_FDT_MEMORY=y
++# CONFIG_USE_BOOTARGS is not set
++# CONFIG_BOOTARGS_SUBST is not set
++# CONFIG_USE_BOOTCOMMAND is not set
++CONFIG_USE_PREBOOT=y
++CONFIG_DEFAULT_FDT_FILE="openwrt-one"
++# CONFIG_SAVE_PREV_BL_FDT_ADDR is not set
++# CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR is not set
++
++#
++# Configuration editor
++#
++# CONFIG_CEDIT is not set
++
++#
++# Console
++#
++CONFIG_MENU=y
++# CONFIG_CONSOLE_RECORD is not set
++# CONFIG_DISABLE_CONSOLE is not set
++CONFIG_LOGLEVEL=7
++# CONFIG_SILENT_CONSOLE is not set
++# CONFIG_SPL_SILENT_CONSOLE is not set
++# CONFIG_TPL_SILENT_CONSOLE is not set
++# CONFIG_PRE_CONSOLE_BUFFER is not set
++CONFIG_CONSOLE_FLUSH_SUPPORT=y
++# CONFIG_CONSOLE_FLUSH_ON_NEWLINE is not set
++# CONFIG_CONSOLE_MUX is not set
++# CONFIG_SYS_CONSOLE_IS_IN_ENV is not set
++# CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE is not set
++# CONFIG_SYS_CONSOLE_INFO_QUIET is not set
++# CONFIG_SYS_STDIO_DEREGISTER is not set
++# CONFIG_SPL_SYS_STDIO_DEREGISTER is not set
++# CONFIG_SYS_DEVICE_NULLDEV is not set
++
++#
++# Logging
++#
++CONFIG_LOG=y
++CONFIG_LOG_MAX_LEVEL=6
++CONFIG_LOG_DEFAULT_LEVEL=6
++CONFIG_LOG_CONSOLE=y
++# CONFIG_LOGF_FILE is not set
++# CONFIG_LOGF_LINE is not set
++# CONFIG_LOGF_FUNC is not set
++CONFIG_LOGF_FUNC_PAD=20
++# CONFIG_LOG_SYSLOG is not set
++# CONFIG_LOG_ERROR_RETURN is not set
++
++#
++# Init options
++#
++# CONFIG_BOARD_TYPES is not set
++CONFIG_DISPLAY_CPUINFO=y
++CONFIG_DISPLAY_BOARDINFO=y
++# CONFIG_DISPLAY_BOARDINFO_LATE is not set
++
++#
++# Start-up hooks
++#
++# CONFIG_CYCLIC is not set
++CONFIG_EVENT=y
++CONFIG_EVENT_DYNAMIC=y
++# CONFIG_EVENT_DEBUG is not set
++# CONFIG_ARCH_MISC_INIT is not set
++# CONFIG_BOARD_EARLY_INIT_F is not set
++# CONFIG_BOARD_EARLY_INIT_R is not set
++# CONFIG_BOARD_POSTCLK_INIT is not set
++CONFIG_BOARD_LATE_INIT=y
++# CONFIG_CLOCKS is not set
++# CONFIG_HWCONFIG is not set
++CONFIG_LAST_STAGE_INIT=y
++# CONFIG_MISC_INIT_R is not set
++# CONFIG_SYS_MALLOC_BOOTPARAMS is not set
++# CONFIG_ID_EEPROM is not set
++# CONFIG_RESET_PHY_R is not set
++
++#
++# Security support
++#
++CONFIG_HASH=y
++# CONFIG_STACKPROTECTOR is not set
++# CONFIG_BOARD_RNG_SEED is not set
++
++#
++# Update support
++#
++# CONFIG_UPDATE_TFTP is not set
++# CONFIG_ANDROID_AB is not set
++
++#
++# Blob list
++#
++# CONFIG_BLOBLIST is not set
++CONFIG_SUPPORT_SPL=y
++# CONFIG_VPL is not set
++
++#
++# Command line interface
++#
++CONFIG_CMDLINE=y
++CONFIG_HUSH_PARSER=y
++CONFIG_CMDLINE_EDITING=y
++# CONFIG_CMDLINE_PS_SUPPORT is not set
++CONFIG_AUTO_COMPLETE=y
++CONFIG_SYS_LONGHELP=y
++CONFIG_SYS_PROMPT="OpenWrt One> "
++CONFIG_SYS_PROMPT_HUSH_PS2="> "
++CONFIG_SYS_MAXARGS=16
++CONFIG_SYS_CBSIZE=512
++CONFIG_SYS_PBSIZE=1049
++CONFIG_SYS_XTRACE=y
++CONFIG_BUILD_BIN2C=y
++
++#
++# Commands
++#
++
++#
++# Info commands
++#
++CONFIG_CMD_BDI=y
++# CONFIG_CMD_BDINFO_EXTRA is not set
++# CONFIG_CMD_CONFIG is not set
++CONFIG_CMD_CONSOLE=y
++CONFIG_CMD_CPU=y
++# CONFIG_CMD_HISTORY is not set
++CONFIG_CMD_LICENSE=y
++# CONFIG_CMD_PMC is not set
++
++#
++# Boot commands
++#
++CONFIG_CMD_BOOTD=y
++CONFIG_CMD_BOOTM=y
++# CONFIG_CMD_BOOTDEV is not set
++CONFIG_CMD_BOOTFLOW=y
++# CONFIG_CMD_BOOTMETH is not set
++CONFIG_BOOTM_EFI=y
++# CONFIG_CMD_BOOTZ is not set
++CONFIG_CMD_BOOTI=y
++CONFIG_BOOTM_LINUX=y
++# CONFIG_BOOTM_NETBSD is not set
++# CONFIG_BOOTM_OPENRTOS is not set
++# CONFIG_BOOTM_OSE is not set
++# CONFIG_BOOTM_PLAN9 is not set
++# CONFIG_BOOTM_RTEMS is not set
++# CONFIG_CMD_VBE is not set
++# CONFIG_BOOTM_VXWORKS is not set
++CONFIG_SYS_BOOTM_LEN=0x4000000
++CONFIG_CMD_BOOTEFI=y
++CONFIG_CMD_BOOTEFI_HELLO_COMPILE=y
++# CONFIG_CMD_BOOTEFI_HELLO is not set
++# CONFIG_CMD_BOOTEFI_SELFTEST is not set
++CONFIG_CMD_BOOTMENU=y
++# CONFIG_CMD_ADTIMG is not set
++CONFIG_CMD_ELF=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_GO=y
++CONFIG_CMD_RUN=y
++CONFIG_CMD_IMI=y
++# CONFIG_CMD_IMLS is not set
++CONFIG_CMD_XIMG=y
++# CONFIG_CMD_ZBOOT is not set
++
++#
++# Environment commands
++#
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_EXPORTENV=y
++CONFIG_CMD_IMPORTENV=y
++CONFIG_CMD_EDITENV=y
++# CONFIG_CMD_GREPENV is not set
++CONFIG_CMD_SAVEENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_EXISTS=y
++CONFIG_CMD_ENV_READMEM=y
++# CONFIG_CMD_ENV_CALLBACK is not set
++CONFIG_CMD_ENV_FLAGS=y
++# CONFIG_CMD_NVEDIT_EFI is not set
++# CONFIG_CMD_NVEDIT_INDIRECT is not set
++# CONFIG_CMD_NVEDIT_INFO is not set
++# CONFIG_CMD_NVEDIT_LOAD is not set
++# CONFIG_CMD_NVEDIT_SELECT is not set
++
++#
++# Memory commands
++#
++# CONFIG_CMD_BINOP is not set
++# CONFIG_CMD_BLOBLIST is not set
++CONFIG_CMD_CRC32=y
++# CONFIG_CRC32_VERIFY is not set
++# CONFIG_CMD_EEPROM is not set
++# CONFIG_LOOPW is not set
++# CONFIG_CMD_MD5SUM is not set
++# CONFIG_CMD_MEMINFO is not set
++CONFIG_CMD_MEMORY=y
++# CONFIG_CMD_MEM_SEARCH is not set
++# CONFIG_CMD_MX_CYCLIC is not set
++CONFIG_CMD_RANDOM=y
++# CONFIG_CMD_MEMTEST is not set
++# CONFIG_CMD_SHA1SUM is not set
++CONFIG_CMD_STRINGS=y
++
++#
++# Compression commands
++#
++CONFIG_CMD_LZMADEC=y
++# CONFIG_CMD_UNLZ4 is not set
++# CONFIG_CMD_UNZIP is not set
++# CONFIG_CMD_ZIP is not set
++
++#
++# Device access commands
++#
++# CONFIG_CMD_ARMFLASH is not set
++# CONFIG_CMD_BIND is not set
++# CONFIG_CMD_CLK is not set
++# CONFIG_CMD_DEMO is not set
++# CONFIG_CMD_DFU is not set
++CONFIG_CMD_DM=y
++CONFIG_CMD_FLASH=y
++# CONFIG_CMD_FPGAD is not set
++# CONFIG_CMD_FUSE is not set
++CONFIG_CMD_GPIO=y
++# CONFIG_CMD_GPIO_READ is not set
++CONFIG_CMD_PWM=y
++# CONFIG_CMD_GPT is not set
++# CONFIG_RANDOM_UUID is not set
++# CONFIG_CMD_IDE is not set
++# CONFIG_CMD_IO is not set
++# CONFIG_CMD_IOTRACE is not set
++# CONFIG_CMD_I2C is not set
++CONFIG_CMD_LOADB=y
++# CONFIG_CMD_LOADM is not set
++CONFIG_CMD_LOADS=y
++# CONFIG_LOADS_ECHO is not set
++# CONFIG_CMD_SAVES is not set
++# CONFIG_SYS_LOADS_BAUD_CHANGE is not set
++CONFIG_CMD_LOADXY_TIMEOUT=90
++# CONFIG_CMD_LSBLK is not set
++# CONFIG_CMD_MBR is not set
++# CONFIG_CMD_CLONE is not set
++CONFIG_CMD_MTD=y
++CONFIG_CMD_NAND_EXT=y
++# CONFIG_CMD_ONENAND is not set
++# CONFIG_CMD_OSD is not set
++# CONFIG_CMD_PART is not set
++CONFIG_CMD_PCI=y
++CONFIG_CMD_PINMUX=y
++# CONFIG_CMD_POWEROFF is not set
++# CONFIG_CMD_READ is not set
++# CONFIG_CMD_SATA is not set
++# CONFIG_CMD_SDRAM is not set
++CONFIG_CMD_SF=y
++CONFIG_CMD_SF_TEST=y
++# CONFIG_CMD_SPI is not set
++# CONFIG_CMD_TSI148 is not set
++# CONFIG_CMD_UNIVERSE is not set
++CONFIG_CMD_USB=y
++# CONFIG_CMD_USB_SDP is not set
++# CONFIG_CMD_RKMTD is not set
++# CONFIG_CMD_WRITE is not set
++
++#
++# Shell scripting commands
++#
++# CONFIG_CMD_CAT is not set
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_SETEXPR=y
++# CONFIG_CMD_SETEXPR_FMT is not set
++# CONFIG_CMD_XXD is not set
++
++#
++# Android support commands
++#
++CONFIG_CMD_NET=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_DHCP=y
++# CONFIG_BOOTP_MAY_FAIL is not set
++CONFIG_BOOTP_BOOTPATH=y
++# CONFIG_BOOTP_VENDOREX is not set
++# CONFIG_BOOTP_BOOTFILESIZE is not set
++CONFIG_BOOTP_DNS=y
++# CONFIG_BOOTP_DNS2 is not set
++CONFIG_BOOTP_GATEWAY=y
++CONFIG_BOOTP_HOSTNAME=y
++# CONFIG_BOOTP_PREFER_SERVERIP is not set
++CONFIG_BOOTP_SUBNETMASK=y
++# CONFIG_BOOTP_NISDOMAIN is not set
++# CONFIG_BOOTP_NTPSERVER is not set
++# CONFIG_BOOTP_TIMEOFFSET is not set
++# CONFIG_CMD_PCAP is not set
++CONFIG_BOOTP_PXE=y
++CONFIG_BOOTP_PXE_CLIENTARCH=0x16
++# CONFIG_BOOTP_PXE_DHCP_OPTION is not set
++CONFIG_BOOTP_VCI_STRING="U-Boot.armv8"
++CONFIG_CMD_TFTPBOOT=y
++# CONFIG_CMD_TFTPPUT is not set
++CONFIG_CMD_TFTPSRV=y
++CONFIG_NET_TFTP_VARS=y
++CONFIG_CMD_RARP=y
++# CONFIG_CMD_NFS is not set
++# CONFIG_SYS_DISABLE_AUTOLOAD is not set
++# CONFIG_CMD_WGET is not set
++# CONFIG_CMD_MII is not set
++# CONFIG_CMD_MDIO is not set
++CONFIG_CMD_PING=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_LINK_LOCAL=y
++# CONFIG_CMD_ETHSW is not set
++CONFIG_CMD_PXE=y
++# CONFIG_CMD_WOL is not set
++
++#
++# Misc commands
++#
++# CONFIG_CMD_2048 is not set
++# CONFIG_CMD_BSP is not set
++CONFIG_CMD_BLOCK_CACHE=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++# CONFIG_CMD_CONITRACE is not set
++# CONFIG_CMD_CLS is not set
++# CONFIG_CMD_EFIDEBUG is not set
++CONFIG_CMD_EFICONFIG=y
++# CONFIG_CMD_EXCEPTION is not set
++CONFIG_CMD_LED=y
++# CONFIG_CMD_INI is not set
++# CONFIG_CMD_DATE is not set
++# CONFIG_CMD_TIME is not set
++# CONFIG_CMD_GETTIME is not set
++# CONFIG_CMD_PAUSE is not set
++CONFIG_CMD_SLEEP=y
++# CONFIG_CMD_TIMER is not set
++# CONFIG_CMD_SYSBOOT is not set
++# CONFIG_CMD_QFW is not set
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_PSTORE_MEM_SIZE=0x10000
++CONFIG_CMD_PSTORE_RECORD_SIZE=0x1000
++CONFIG_CMD_PSTORE_CONSOLE_SIZE=0x1000
++CONFIG_CMD_PSTORE_FTRACE_SIZE=0x1000
++CONFIG_CMD_PSTORE_PMSG_SIZE=0x1000
++CONFIG_CMD_PSTORE_ECC_SIZE=0
++# CONFIG_CMD_TERMINAL is not set
++CONFIG_CMD_UUID=y
++
++#
++# TI specific command line interface
++#
++
++#
++# Power commands
++#
++
++#
++# Security commands
++#
++# CONFIG_CMD_AES is not set
++# CONFIG_CMD_BLOB is not set
++CONFIG_CMD_HASH=y
++# CONFIG_CMD_HVC is not set
++CONFIG_CMD_SMC=y
++# CONFIG_HASH_VERIFY is not set
++
++#
++# Firmware commands
++#
++
++#
++# Filesystem commands
++#
++# CONFIG_CMD_BTRFS is not set
++# CONFIG_CMD_EROFS is not set
++# CONFIG_CMD_EXT2 is not set
++# CONFIG_CMD_EXT4 is not set
++CONFIG_CMD_FAT=y
++# CONFIG_CMD_SQUASHFS is not set
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++# CONFIG_CMD_JFFS2 is not set
++# CONFIG_CMD_MTDPARTS is not set
++CONFIG_MTDIDS_DEFAULT=""
++CONFIG_MTDPARTS_DEFAULT=""
++# CONFIG_CMD_REISER is not set
++# CONFIG_CMD_ZFS is not set
++
++#
++# Debug commands
++#
++# CONFIG_CMD_DIAG is not set
++# CONFIG_CMD_EVENT is not set
++# CONFIG_CMD_LOG is not set
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_CMD_UBIFS=y
++
++#
++# Partition Types
++#
++CONFIG_PARTITIONS=y
++# CONFIG_MAC_PARTITION is not set
++CONFIG_DOS_PARTITION=y
++# CONFIG_ISO_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++CONFIG_PARTITION_UUIDS=y
++CONFIG_SUPPORT_OF_CONTROL=y
++
++#
++# Device Tree Control
++#
++CONFIG_OF_CONTROL=y
++CONFIG_OF_REAL=y
++# CONFIG_OF_LIVE is not set
++CONFIG_OF_SEPARATE=y
++# CONFIG_OF_EMBED is not set
++# CONFIG_OF_BOARD is not set
++# CONFIG_OF_OMIT_DTB is not set
++CONFIG_DEVICE_TREE_INCLUDES=""
++CONFIG_OF_LIST="openwrt-one"
++# CONFIG_MULTI_DTB_FIT is not set
++CONFIG_OF_TAG_MIGRATE=y
++# CONFIG_OF_DTB_PROPS_REMOVE is not set
++
++#
++# Environment
++#
++CONFIG_ENV_SUPPORT=y
++CONFIG_SAVEENV=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_MIN_ENTRIES=64
++CONFIG_ENV_MAX_ENTRIES=512
++CONFIG_ENV_IS_DEFAULT=y
++CONFIG_ENV_IS_NOWHERE=y
++# CONFIG_ENV_IS_IN_EEPROM is not set
++# CONFIG_ENV_IS_IN_FAT is not set
++# CONFIG_ENV_IS_IN_EXT4 is not set
++# CONFIG_ENV_IS_IN_FLASH is not set
++# CONFIG_ENV_IS_IN_MTD is not set
++# CONFIG_ENV_IS_IN_NAND is not set
++# CONFIG_ENV_IS_IN_NVRAM is not set
++# CONFIG_ENV_IS_IN_ONENAND is not set
++# CONFIG_ENV_IS_IN_REMOTE is not set
++# CONFIG_ENV_IS_IN_SPI_FLASH is not set
++# CONFIG_ENV_IS_IN_UBI is not set
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_DEFAULT_ENV_FILE="openwrt-one-nor_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++# CONFIG_ENV_IMPORT_FDT is not set
++# CONFIG_ENV_APPEND is not set
++# CONFIG_ENV_WRITEABLE_LIST is not set
++# CONFIG_ENV_ACCESS_IGNORE_FORCE is not set
++# CONFIG_USE_BOOTFILE is not set
++# CONFIG_USE_ETHPRIME is not set
++# CONFIG_USE_HOSTNAME is not set
++# CONFIG_VERSION_VARIABLE is not set
++CONFIG_NET=y
++CONFIG_ARP_TIMEOUT=5000
++CONFIG_NET_RETRY_COUNT=5
++CONFIG_PROT_UDP=y
++CONFIG_BOOTDEV_ETH=y
++# CONFIG_BOOTP_SEND_HOSTNAME is not set
++CONFIG_NET_RANDOM_ETHADDR=y
++# CONFIG_NETCONSOLE is not set
++# CONFIG_IP_DEFRAG is not set
++# CONFIG_SYS_FAULT_ECHO_LINK_DOWN is not set
++CONFIG_TFTP_BLOCKSIZE=1468
++# CONFIG_TFTP_PORT is not set
++CONFIG_TFTP_WINDOWSIZE=1
++# CONFIG_TFTP_TSIZE is not set
++# CONFIG_SERVERIP_FROM_PROXYDHCP is not set
++CONFIG_SERVERIP_FROM_PROXYDHCP_DELAY_MS=100
++# CONFIG_KEEP_SERVERADDR is not set
++# CONFIG_UDP_CHECKSUM is not set
++# CONFIG_BOOTP_SERVERIP is not set
++CONFIG_BOOTP_MAX_ROOT_PATH_LEN=64
++# CONFIG_USE_GATEWAYIP is not set
++# CONFIG_USE_IPADDR is not set
++# CONFIG_USE_NETMASK is not set
++# CONFIG_USE_ROOTPATH is not set
++# CONFIG_USE_SERVERIP is not set
++# CONFIG_PROT_TCP is not set
++# CONFIG_IPV6 is not set
++CONFIG_SYS_RX_ETH_BUFFER=4
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_DM=y
++# CONFIG_DM_WARN is not set
++# CONFIG_DM_DEBUG is not set
++# CONFIG_DM_STATS is not set
++CONFIG_DM_DEVICE_REMOVE=y
++CONFIG_DM_EVENT=y
++CONFIG_DM_STDIO=y
++CONFIG_DM_SEQ_ALIAS=y
++# CONFIG_DM_DMA is not set
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++# CONFIG_DEVRES is not set
++CONFIG_SIMPLE_BUS=y
++# CONFIG_SIMPLE_BUS_CORRECT_RANGE is not set
++# CONFIG_SIMPLE_PM_BUS is not set
++CONFIG_OF_TRANSLATE=y
++# CONFIG_TRANSLATION_OFFSET is not set
++CONFIG_DM_DEV_READ_INLINE=y
++# CONFIG_OFNODE_MULTI_TREE is not set
++# CONFIG_BOUNCE_BUFFER is not set
++# CONFIG_ADC is not set
++# CONFIG_ADC_EXYNOS is not set
++# CONFIG_ADC_SANDBOX is not set
++# CONFIG_SARADC_MESON is not set
++# CONFIG_SARADC_ROCKCHIP is not set
++# CONFIG_SATA is not set
++# CONFIG_SCSI_AHCI is not set
++
++#
++# SATA/SCSI device support
++#
++# CONFIG_AXI is not set
++
++#
++# Bus devices
++#
++CONFIG_BLK=y
++CONFIG_BLOCK_CACHE=y
++# CONFIG_BLKMAP is not set
++# CONFIG_EFI_MEDIA is not set
++# CONFIG_IDE is not set
++# CONFIG_LBA48 is not set
++# CONFIG_SYS_64BIT_LBA is not set
++# CONFIG_RKMTD is not set
++# CONFIG_BOOTCOUNT_LIMIT is not set
++
++#
++# Button Support
++#
++CONFIG_BUTTON=y
++# CONFIG_BUTTON_ADC is not set
++CONFIG_BUTTON_GPIO=y
++
++#
++# Cache Controller drivers
++#
++# CONFIG_CACHE is not set
++# CONFIG_L2X0_CACHE is not set
++# CONFIG_V5L2_CACHE is not set
++# CONFIG_NCORE_CACHE is not set
++# CONFIG_SIFIVE_CCACHE is not set
++
++#
++# Clock
++#
++CONFIG_CLK=y
++# CONFIG_CLK_CCF is not set
++# CONFIG_CLK_GPIO is not set
++# CONFIG_CLK_CDCE9XX is not set
++# CONFIG_CLK_ICS8N3QV01 is not set
++# CONFIG_CLK_K210 is not set
++# CONFIG_CLK_MPC83XX is not set
++# CONFIG_CLK_XLNX_CLKWZRD is not set
++# CONFIG_CLK_AT91 is not set
++# CONFIG_CLK_RCAR is not set
++# CONFIG_CLK_RCAR_CPG_LIB is not set
++# CONFIG_CLK_SIFIVE is not set
++# CONFIG_CLK_TI_AM3_DPLL is not set
++# CONFIG_CLK_TI_CTRL is not set
++# CONFIG_CLK_TI_GATE is not set
++# CONFIG_CLK_K3 is not set
++CONFIG_CPU=y
++# CONFIG_CPU_IMX is not set
++
++#
++# Hardware crypto devices
++#
++# CONFIG_DM_HASH is not set
++# CONFIG_FSL_CAAM is not set
++CONFIG_CAAM_64BIT=y
++# CONFIG_SYS_FSL_SEC_BE is not set
++# CONFIG_SYS_FSL_SEC_LE is not set
++# CONFIG_NPCM_AES is not set
++# CONFIG_NPCM_SHA is not set
++# CONFIG_DDR_SPD is not set
++# CONFIG_IMX_SNPS_DDR_PHY is not set
++
++#
++# Demo for driver model
++#
++# CONFIG_DM_DEMO is not set
++
++#
++# DFU support
++#
++
++#
++# DMA Support
++#
++# CONFIG_DMA is not set
++# CONFIG_DMA_LPC32XX is not set
++# CONFIG_TI_EDMA3 is not set
++# CONFIG_DMA_LEGACY is not set
++
++#
++# Extcon Support
++#
++# CONFIG_EXTCON is not set
++
++#
++# Fastboot support
++#
++# CONFIG_UDP_FUNCTION_FASTBOOT is not set
++# CONFIG_TCP_FUNCTION_FASTBOOT is not set
++CONFIG_FIRMWARE=y
++CONFIG_ARM_PSCI_FW=y
++# CONFIG_ZYNQMP_FIRMWARE is not set
++# CONFIG_ARM_SMCCC_FEATURES is not set
++# CONFIG_ARM_FFA_TRANSPORT is not set
++# CONFIG_SCMI_FIRMWARE is not set
++# CONFIG_DM_FUZZING_ENGINE is not set
++
++#
++# FPGA support
++#
++# CONFIG_FPGA_ALTERA is not set
++# CONFIG_FPGA_SOCFPGA is not set
++# CONFIG_FPGA_LATTICE is not set
++# CONFIG_FPGA_XILINX is not set
++# CONFIG_DM_FPGA is not set
++# CONFIG_FWU_MDATA is not set
++CONFIG_GPIO=y
++CONFIG_GPIO_HOG=y
++# CONFIG_DM_GPIO_LOOKUP_LABEL is not set
++# CONFIG_ALTERA_PIO is not set
++# CONFIG_BCM2835_GPIO is not set
++# CONFIG_DWAPB_GPIO is not set
++# CONFIG_AT91_GPIO is not set
++# CONFIG_ATMEL_PIO4 is not set
++# CONFIG_ASPEED_GPIO is not set
++# CONFIG_DA8XX_GPIO is not set
++# CONFIG_HIKEY_GPIO is not set
++# CONFIG_INTEL_BROADWELL_GPIO is not set
++# CONFIG_INTEL_GPIO is not set
++# CONFIG_INTEL_ICH6_GPIO is not set
++# CONFIG_IMX_RGPIO2P is not set
++# CONFIG_IPROC_GPIO is not set
++# CONFIG_HSDK_CREG_GPIO is not set
++# CONFIG_KIRKWOOD_GPIO is not set
++# CONFIG_LPC32XX_GPIO is not set
++# CONFIG_MCP230XX_GPIO is not set
++# CONFIG_MSM_GPIO is not set
++# CONFIG_MXC_GPIO is not set
++# CONFIG_MXS_GPIO is not set
++# CONFIG_NPCM_GPIO is not set
++# CONFIG_CMD_PCA953X is not set
++# CONFIG_ROCKCHIP_GPIO is not set
++# CONFIG_XILINX_GPIO is not set
++# CONFIG_TCA642X is not set
++# CONFIG_TEGRA_GPIO is not set
++# CONFIG_TEGRA186_GPIO is not set
++# CONFIG_VYBRID_GPIO is not set
++# CONFIG_SIFIVE_GPIO is not set
++# CONFIG_ZYNQ_GPIO is not set
++# CONFIG_DM_74X164 is not set
++# CONFIG_PCA953X is not set
++# CONFIG_MPC8XXX_GPIO is not set
++# CONFIG_MPC8XX_GPIO is not set
++# CONFIG_NX_GPIO is not set
++# CONFIG_NOMADIK_GPIO is not set
++# CONFIG_ZYNQMP_GPIO_MODEPIN is not set
++# CONFIG_SLG7XL45106_I2C_GPO is not set
++# CONFIG_TURRIS_OMNIA_MCU is not set
++# CONFIG_FTGPIO010 is not set
++
++#
++# Hardware Spinlock Support
++#
++# CONFIG_DM_HWSPINLOCK is not set
++CONFIG_I2C=y
++# CONFIG_DM_I2C is not set
++# CONFIG_SYS_I2C_LEGACY is not set
++# CONFIG_SPL_SYS_I2C_LEGACY is not set
++# CONFIG_SYS_I2C_FSL is not set
++# CONFIG_SYS_I2C_DW is not set
++# CONFIG_SYS_I2C_IMX_LPI2C is not set
++# CONFIG_SYS_I2C_MTK is not set
++# CONFIG_SYS_I2C_MICROCHIP is not set
++# CONFIG_SYS_I2C_MXC is not set
++# CONFIG_SYS_I2C_NPCM is not set
++# CONFIG_SYS_I2C_SOFT is not set
++# CONFIG_SYS_I2C_MV is not set
++# CONFIG_SYS_I2C_MVTWSI is not set
++CONFIG_INPUT=y
++# CONFIG_DM_KEYBOARD is not set
++# CONFIG_CROS_EC_KEYB is not set
++# CONFIG_TEGRA_KEYBOARD is not set
++# CONFIG_TWL4030_INPUT is not set
++
++#
++# IOMMU device drivers
++#
++# CONFIG_IOMMU is not set
++
++#
++# LED Support
++#
++CONFIG_LED=y
++# CONFIG_LED_PWM is not set
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++# CONFIG_LED_STATUS is not set
++
++#
++# Mailbox Controller Support
++#
++# CONFIG_DM_MAILBOX is not set
++
++#
++# Memory Controller drivers
++#
++# CONFIG_MEMORY is not set
++# CONFIG_ATMEL_EBI is not set
++# CONFIG_MFD_ATMEL_SMC is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MISC is not set
++# CONFIG_NVMEM is not set
++# CONFIG_SPL_NVMEM is not set
++# CONFIG_SMSC_LPC47M is not set
++# CONFIG_SMSC_SIO1007 is not set
++# CONFIG_CROS_EC is not set
++# CONFIG_DS4510 is not set
++# CONFIG_FSL_SEC_MON is not set
++# CONFIG_IRQ is not set
++# CONFIG_NPCM_HOST is not set
++# CONFIG_NUVOTON_NCT6102D is not set
++# CONFIG_PWRSEQ is not set
++# CONFIG_PCA9551_LED is not set
++# CONFIG_TEST_DRV is not set
++# CONFIG_USB_HUB_USB251XB is not set
++# CONFIG_TWL4030_LED is not set
++# CONFIG_WINBOND_W83627 is not set
++# CONFIG_FS_LOADER is not set
++
++#
++# MMC Host controller Support
++#
++# CONFIG_MMC is not set
++# CONFIG_MMC_BROKEN_CD is not set
++# CONFIG_DM_MMC is not set
++# CONFIG_FSL_ESDHC is not set
++# CONFIG_FSL_ESDHC_IMX is not set
++
++#
++# MTD Support
++#
++CONFIG_MTD_PARTITIONS=y
++CONFIG_MTD=y
++CONFIG_DM_MTD=y
++# CONFIG_MTD_NOR_FLASH is not set
++# CONFIG_MTD_CONCAT is not set
++# CONFIG_SYS_MTDPARTS_RUNTIME is not set
++# CONFIG_FLASH_CFI_DRIVER is not set
++# CONFIG_CFI_FLASH is not set
++# CONFIG_ALTERA_QSPI is not set
++# CONFIG_HBMC_AM654 is not set
++# CONFIG_SAMSUNG_ONENAND is not set
++# CONFIG_USE_SYS_MAX_FLASH_BANKS is not set
++CONFIG_MTD_NAND_CORE=y
++# CONFIG_MTD_RAW_NAND is not set
++CONFIG_MTD_SPI_NAND=y
++
++#
++# SPI Flash Support
++#
++CONFIG_DM_SPI_FLASH=y
++CONFIG_SPI_FLASH=y
++CONFIG_SF_DEFAULT_BUS=0
++CONFIG_SF_DEFAULT_CS=0
++# CONFIG_BOOTDEV_SPI_FLASH is not set
++CONFIG_SPI_FLASH_SFDP_SUPPORT=y
++CONFIG_SPI_FLASH_SMART_HWCAPS=y
++# CONFIG_SPI_NOR_BOOT_SOFT_RESET_EXT_INVERT is not set
++# CONFIG_SPI_FLASH_SOFT_RESET is not set
++# CONFIG_SPI_FLASH_BAR is not set
++CONFIG_SPI_FLASH_LOCK=y
++CONFIG_SPI_FLASH_UNLOCK_ALL=y
++# CONFIG_SPI_FLASH_ATMEL is not set
++CONFIG_SPI_FLASH_EON=y
++CONFIG_SPI_FLASH_GIGADEVICE=y
++CONFIG_SPI_FLASH_ISSI=y
++CONFIG_SPI_FLASH_MACRONIX=y
++CONFIG_SPI_FLASH_SPANSION=y
++# CONFIG_SPI_FLASH_S28HX_T is not set
++CONFIG_SPI_FLASH_STMICRO=y
++# CONFIG_SPI_FLASH_MT35XU is not set
++# CONFIG_SPI_FLASH_SST is not set
++CONFIG_SPI_FLASH_WINBOND=y
++CONFIG_SPI_FLASH_XMC=y
++CONFIG_SPI_FLASH_XTX=y
++# CONFIG_SPI_FLASH_ZBIT is not set
++CONFIG_SPI_FLASH_USE_4K_SECTORS=y
++# CONFIG_SPI_FLASH_DATAFLASH is not set
++CONFIG_SPI_FLASH_MTD=y
++
++#
++# UBI support
++#
++CONFIG_UBI_SILENCE_MSG=y
++CONFIG_MTD_UBI=y
++CONFIG_MTD_UBI_MODULE=y
++CONFIG_MTD_UBI_WL_THRESHOLD=4096
++CONFIG_MTD_UBI_BEB_LIMIT=20
++# CONFIG_MTD_UBI_FASTMAP is not set
++# CONFIG_NVMXIP is not set
++# CONFIG_NVMXIP_QSPI is not set
++# CONFIG_NMBM is not set
++
++#
++# Multiplexer drivers
++#
++# CONFIG_MULTIPLEXER is not set
++# CONFIG_BITBANGMII is not set
++# CONFIG_MV88E6352_SWITCH is not set
++CONFIG_PHYLIB=y
++# CONFIG_PHY_ADDR_ENABLE is not set
++# CONFIG_B53_SWITCH is not set
++# CONFIG_MV88E61XX_SWITCH is not set
++# CONFIG_PHYLIB_10G is not set
++# CONFIG_PHY_ADIN is not set
++# CONFIG_PHY_AIROHA is not set
++# CONFIG_PHY_AQUANTIA is not set
++# CONFIG_PHY_ATHEROS is not set
++# CONFIG_SPL_PHY_ATHEROS is not set
++# CONFIG_PHY_BROADCOM is not set
++# CONFIG_PHY_CORTINA is not set
++# CONFIG_PHY_DAVICOM is not set
++# CONFIG_PHY_ET1011C is not set
++# CONFIG_PHY_LXT is not set
++# CONFIG_PHY_MARVELL is not set
++# CONFIG_PHY_MARVELL_10G is not set
++# CONFIG_PHY_MESON_GXL is not set
++# CONFIG_PHY_MICREL is not set
++# CONFIG_PHY_MOTORCOMM is not set
++# CONFIG_PHY_MSCC is not set
++# CONFIG_PHY_NATSEMI is not set
++# CONFIG_PHY_NXP_C45_TJA11XX is not set
++# CONFIG_PHY_NXP_TJA11XX is not set
++# CONFIG_PHY_REALTEK is not set
++# CONFIG_PHY_SMSC is not set
++# CONFIG_PHY_TERANETICS is not set
++# CONFIG_PHY_TI is not set
++# CONFIG_PHY_TI_DP83867 is not set
++# CONFIG_PHY_TI_DP83869 is not set
++# CONFIG_PHY_TI_GENERIC is not set
++# CONFIG_PHY_VITESSE is not set
++# CONFIG_PHY_XILINX is not set
++# CONFIG_PHY_XILINX_GMII2RGMII is not set
++# CONFIG_PHY_XWAY is not set
++# CONFIG_PHY_ETHERNET_ID is not set
++CONFIG_PHY_FIXED=y
++# CONFIG_PHY_NCSI is not set
++# CONFIG_FSL_MEMAC is not set
++CONFIG_PHY_RESET_DELAY=0
++# CONFIG_FSL_PFE is not set
++CONFIG_ETH=y
++CONFIG_DM_ETH=y
++# CONFIG_DM_MDIO is not set
++# CONFIG_DM_ETH_PHY is not set
++CONFIG_NETDEVICES=y
++# CONFIG_PHY_GIGE is not set
++# CONFIG_ALTERA_TSE is not set
++# CONFIG_BCM_SF2_ETH is not set
++# CONFIG_BCMGENET is not set
++# CONFIG_BNXT_ETH is not set
++# CONFIG_CALXEDA_XGMAC is not set
++# CONFIG_DRIVER_DM9000 is not set
++# CONFIG_DWC_ETH_QOS is not set
++# CONFIG_EEPRO100 is not set
++# CONFIG_ETH_DESIGNWARE is not set
++# CONFIG_ETH_DESIGNWARE_MESON8B is not set
++# CONFIG_ETHOC is not set
++# CONFIG_FMAN_ENET is not set
++# CONFIG_FTMAC100 is not set
++# CONFIG_FTGMAC100 is not set
++# CONFIG_MCFFEC is not set
++# CONFIG_FSLDMAFEC is not set
++# CONFIG_KS8851_MLL is not set
++# CONFIG_LITEETH is not set
++# CONFIG_MACB is not set
++# CONFIG_NET_NPCM750 is not set
++# CONFIG_PCH_GBE is not set
++# CONFIG_RGMII is not set
++# CONFIG_MII is not set
++# CONFIG_RMII is not set
++# CONFIG_PCNET is not set
++# CONFIG_QE_UEC is not set
++# CONFIG_RTL8139 is not set
++# CONFIG_SMC911X is not set
++# CONFIG_SUN7I_GMAC is not set
++# CONFIG_SUN4I_EMAC is not set
++# CONFIG_SUN8I_EMAC is not set
++# CONFIG_SH_ETHER is not set
++# CONFIG_DRIVER_TI_CPSW is not set
++# CONFIG_DRIVER_TI_EMAC is not set
++# CONFIG_DRIVER_TI_KEYSTONE_NET is not set
++# CONFIG_TULIP is not set
++# CONFIG_XILINX_AXIEMAC is not set
++# CONFIG_VSC7385_ENET is not set
++# CONFIG_XILINX_EMACLITE is not set
++# CONFIG_ZYNQ_GEM is not set
++# CONFIG_SYS_DPAA_QBMAN is not set
++# CONFIG_TSEC_ENET is not set
++CONFIG_MEDIATEK_ETH=y
++# CONFIG_HIFEMAC_ETH is not set
++# CONFIG_HIGMACV300_ETH is not set
++# CONFIG_NVME is not set
++# CONFIG_NVME_APPLE is not set
++
++#
++# PCI Endpoint
++#
++# CONFIG_PCI_ENDPOINT is not set
++# CONFIG_X86_PCH7 is not set
++# CONFIG_X86_PCH9 is not set
++
++#
++# PHY Subsystem
++#
++CONFIG_PHY=y
++# CONFIG_NOP_PHY is not set
++# CONFIG_MIPI_DPHY_HELPERS is not set
++# CONFIG_BCM_SR_PCIE_PHY is not set
++# CONFIG_OMAP_USB2_PHY is not set
++CONFIG_PHY_MTK_TPHY=y
++
++#
++# Rockchip PHY driver
++#
++# CONFIG_PHY_CADENCE_SIERRA is not set
++# CONFIG_PHY_CADENCE_TORRENT is not set
++# CONFIG_MSM8916_USB_PHY is not set
++# CONFIG_MVEBU_COMPHY_SUPPORT is not set
++
++#
++# Pin controllers
++#
++CONFIG_PINCTRL=y
++CONFIG_PINCTRL_FULL=y
++CONFIG_PINCTRL_GENERIC=y
++CONFIG_PINMUX=y
++CONFIG_PINCONF=y
++CONFIG_PINCONF_RECURSIVE=y
++# CONFIG_PINCTRL_AT91 is not set
++# CONFIG_PINCTRL_AT91PIO4 is not set
++# CONFIG_PINCTRL_INTEL is not set
++# CONFIG_PINCTRL_QE is not set
++# CONFIG_PINCTRL_ROCKCHIP_RV1108 is not set
++# CONFIG_PINCTRL_SINGLE is not set
++# CONFIG_PINCTRL_STM32 is not set
++# CONFIG_PINCTRL_STMFX is not set
++# CONFIG_PINCTRL_K210 is not set
++CONFIG_PINCTRL_MTK=y
++# CONFIG_PINCTRL_MT7622 is not set
++# CONFIG_PINCTRL_MT7623 is not set
++# CONFIG_PINCTRL_MT7629 is not set
++CONFIG_PINCTRL_MT7981=y
++# CONFIG_PINCTRL_MT7986 is not set
++# CONFIG_PINCTRL_MT7988 is not set
++# CONFIG_PINCTRL_MT8512 is not set
++# CONFIG_PINCTRL_MT8516 is not set
++# CONFIG_PINCTRL_MT8518 is not set
++CONFIG_POWER=y
++# CONFIG_POWER_LEGACY is not set
++# CONFIG_ACPI_PMC is not set
++
++#
++# Power Domain Support
++#
++CONFIG_POWER_DOMAIN=y
++# CONFIG_APPLE_PMGR_POWER_DOMAIN is not set
++CONFIG_MTK_POWER_DOMAIN=y
++# CONFIG_DM_PMIC is not set
++# CONFIG_PMIC_TPS65217 is not set
++# CONFIG_POWER_TPS65218 is not set
++# CONFIG_POWER_TPS62362 is not set
++# CONFIG_DM_REGULATOR is not set
++# CONFIG_TPS6586X_POWER is not set
++# CONFIG_POWER_MT6323 is not set
++CONFIG_DM_PWM=y
++# CONFIG_PWM_ASPEED is not set
++# CONFIG_PWM_CADENCE_TTC is not set
++# CONFIG_PWM_CROS_EC is not set
++# CONFIG_PWM_EXYNOS is not set
++# CONFIG_PWM_IMX is not set
++# CONFIG_PWM_MESON is not set
++CONFIG_PWM_MTK=y
++# CONFIG_PWM_ROCKCHIP is not set
++# CONFIG_PWM_SANDBOX is not set
++# CONFIG_PWM_SIFIVE is not set
++# CONFIG_PWM_TEGRA is not set
++# CONFIG_PWM_SUNXI is not set
++# CONFIG_U_QE is not set
++# CONFIG_RAM is not set
++
++#
++# Reboot Mode Support
++#
++# CONFIG_DM_REBOOT_MODE is not set
++
++#
++# Remote Processor drivers
++#
++
++#
++# Reset Controller Support
++#
++# CONFIG_RESET_AST2500 is not set
++# CONFIG_RESET_AST2600 is not set
++CONFIG_RESET_MEDIATEK=y
++# CONFIG_RESET_HISILICON is not set
++# CONFIG_RESET_SYSCON is not set
++# CONFIG_RESET_SCMI is not set
++# CONFIG_RESET_DRA7 is not set
++# CONFIG_DM_RNG is not set
++
++#
++# Real Time Clock
++#
++# CONFIG_DM_RTC is not set
++# CONFIG_RTC_ENABLE_32KHZ_OUTPUT is not set
++# CONFIG_RTC_DS1337 is not set
++# CONFIG_RTC_DS1338 is not set
++# CONFIG_RTC_DS1374 is not set
++# CONFIG_RTC_DS3231 is not set
++# CONFIG_RTC_PCF8563 is not set
++# CONFIG_RTC_PT7C4338 is not set
++# CONFIG_RTC_PL031 is not set
++# CONFIG_RTC_S35392A is not set
++# CONFIG_RTC_MC13XXX is not set
++# CONFIG_RTC_MC146818 is not set
++# CONFIG_RTC_M41T62 is not set
++# CONFIG_SCSI is not set
++# CONFIG_DM_SCSI is not set
++CONFIG_SERIAL=y
++CONFIG_BAUDRATE=115200
++# CONFIG_DEFAULT_ENV_IS_RW is not set
++CONFIG_REQUIRE_SERIAL_CONSOLE=y
++# CONFIG_SPECIFY_CONSOLE_INDEX is not set
++CONFIG_SERIAL_PRESENT=y
++CONFIG_DM_SERIAL=y
++# CONFIG_SERIAL_RX_BUFFER is not set
++# CONFIG_SERIAL_PUTS is not set
++# CONFIG_SERIAL_SEARCH_ALL is not set
++# CONFIG_SERIAL_PROBE_ALL is not set
++# CONFIG_VPL_DM_SERIAL is not set
++CONFIG_DEBUG_UART_MTK=y
++CONFIG_DEBUG_UART_SHIFT=0
++# CONFIG_DEBUG_UART_ANNOUNCE is not set
++# CONFIG_DEBUG_UART_SKIP_INIT is not set
++# CONFIG_ALTERA_JTAG_UART is not set
++# CONFIG_ALTERA_UART is not set
++# CONFIG_ARC_SERIAL is not set
++# CONFIG_ARM_DCC is not set
++# CONFIG_ATMEL_USART is not set
++# CONFIG_BCM6345_SERIAL is not set
++# CONFIG_COREBOOT_SERIAL is not set
++# CONFIG_CORTINA_UART is not set
++# CONFIG_FSL_LINFLEXUART is not set
++# CONFIG_FSL_LPUART is not set
++# CONFIG_MVEBU_A3700_UART is not set
++# CONFIG_MCFUART is not set
++# CONFIG_NULLDEV_SERIAL is not set
++# CONFIG_SYS_NS16550 is not set
++# CONFIG_PL01X_SERIAL is not set
++# CONFIG_ROCKCHIP_SERIAL is not set
++# CONFIG_XILINX_UARTLITE is not set
++# CONFIG_MSM_SERIAL is not set
++# CONFIG_MSM_GENI_SERIAL is not set
++# CONFIG_MXS_AUART_SERIAL is not set
++# CONFIG_OMAP_SERIAL is not set
++# CONFIG_SIFIVE_SERIAL is not set
++# CONFIG_ZYNQ_SERIAL is not set
++CONFIG_MTK_SERIAL=y
++# CONFIG_MT7620_SERIAL is not set
++# CONFIG_NPCM_SERIAL is not set
++# CONFIG_SM is not set
++# CONFIG_MESON_SM is not set
++# CONFIG_SMEM is not set
++
++#
++# Sound support
++#
++# CONFIG_SOUND is not set
++
++#
++# SOC (System On Chip) specific Drivers
++#
++# CONFIG_SOC_DEVICE is not set
++# CONFIG_SOC_TI is not set
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_SPI_MEM=y
++# CONFIG_SPI_DIRMAP is not set
++# CONFIG_ALTERA_SPI is not set
++# CONFIG_APPLE_SPI is not set
++# CONFIG_ATCSPI200_SPI is not set
++# CONFIG_ATMEL_SPI is not set
++# CONFIG_BCMSTB_SPI is not set
++# CONFIG_CORTINA_SFLASH is not set
++# CONFIG_CADENCE_QSPI is not set
++# CONFIG_CF_SPI is not set
++# CONFIG_DESIGNWARE_SPI is not set
++# CONFIG_EXYNOS_SPI is not set
++# CONFIG_FSL_DSPI is not set
++# CONFIG_FSL_QSPI is not set
++# CONFIG_GXP_SPI is not set
++# CONFIG_ICH_SPI is not set
++# CONFIG_IPROC_QSPI is not set
++# CONFIG_KIRKWOOD_SPI is not set
++# CONFIG_MICROCHIP_COREQSPI is not set
++# CONFIG_MPC8XXX_SPI is not set
++# CONFIG_MTK_SNOR is not set
++# CONFIG_MTK_SNFI_SPI is not set
++CONFIG_MTK_SPIM=y
++# CONFIG_MVEBU_A3700_SPI is not set
++# CONFIG_MXS_SPI is not set
++# CONFIG_SPI_MXIC is not set
++# CONFIG_NPCM_FIU_SPI is not set
++# CONFIG_NPCM_PSPI is not set
++# CONFIG_NXP_FSPI is not set
++# CONFIG_OMAP3_SPI is not set
++# CONFIG_PL022_SPI is not set
++# CONFIG_ROCKCHIP_SFC is not set
++# CONFIG_ROCKCHIP_SPI is not set
++# CONFIG_SPI_ASPEED_SMC is not set
++# CONFIG_SPI_SIFIVE is not set
++# CONFIG_SOFT_SPI is not set
++# CONFIG_SPI_SN_F_OSPI is not set
++# CONFIG_SPI_SUNXI is not set
++# CONFIG_TEGRA114_SPI is not set
++# CONFIG_TEGRA20_SFLASH is not set
++# CONFIG_TEGRA20_SLINK is not set
++# CONFIG_TEGRA210_QSPI is not set
++# CONFIG_TI_QSPI is not set
++# CONFIG_XILINX_SPI is not set
++# CONFIG_ZYNQ_SPI is not set
++# CONFIG_ZYNQ_QSPI is not set
++# CONFIG_ZYNQMP_GQSPI is not set
++# CONFIG_SH_QSPI is not set
++# CONFIG_MXC_SPI is not set
++
++#
++# SPMI support
++#
++# CONFIG_SPMI is not set
++# CONFIG_SYSINFO is not set
++
++#
++# System reset device drivers
++#
++# CONFIG_SYSRESET is not set
++# CONFIG_TEE is not set
++# CONFIG_DM_THERMAL is not set
++
++#
++# Timer Support
++#
++# CONFIG_TIMER is not set
++
++#
++# TPM support
++#
++CONFIG_USB=y
++CONFIG_DM_USB=y
++# CONFIG_DM_USB_GADGET is not set
++
++#
++# USB Host Controller Drivers
++#
++CONFIG_USB_HOST=y
++CONFIG_USB_XHCI_HCD=y
++# CONFIG_USB_XHCI_DWC3 is not set
++# CONFIG_USB_XHCI_DWC3_OF_SIMPLE is not set
++CONFIG_USB_XHCI_MTK=y
++# CONFIG_USB_XHCI_FSL is not set
++# CONFIG_USB_XHCI_BRCM is not set
++# CONFIG_USB_EHCI_HCD is not set
++# CONFIG_USB_OHCI_HCD is not set
++# CONFIG_USB_UHCI_HCD is not set
++# CONFIG_USB_DWC2 is not set
++# CONFIG_USB_R8A66597_HCD is not set
++# CONFIG_USB_ISP1760 is not set
++# CONFIG_USB_CDNS3 is not set
++# CONFIG_USB_DWC3 is not set
++# CONFIG_USB_MTU3 is not set
++
++#
++# Legacy MUSB Support
++#
++# CONFIG_USB_MUSB_HCD is not set
++# CONFIG_USB_MUSB_UDC is not set
++
++#
++# MUSB Controller Driver
++#
++# CONFIG_USB_MUSB_HOST is not set
++# CONFIG_USB_MUSB_PIO_ONLY is not set
++
++#
++# USB Phy
++#
++# CONFIG_TWL4030_USB is not set
++# CONFIG_ROCKCHIP_USB2_PHY is not set
++
++#
++# ULPI drivers
++#
++
++#
++# USB peripherals
++#
++CONFIG_USB_STORAGE=y
++# CONFIG_USB_KEYBOARD is not set
++# CONFIG_USB_ONBOARD_HUB is not set
++CONFIG_USB_HUB_DEBOUNCE_TIMEOUT=1000
++# CONFIG_USB_HOST_ETHER is not set
++# CONFIG_USB_GADGET is not set
++# CONFIG_SPL_USB_GADGET is not set
++
++#
++# UFS Host Controller Support
++#
++# CONFIG_TI_J721E_UFS is not set
++
++#
++# Graphics support
++#
++# CONFIG_VIDEO is not set
++
++#
++# VirtIO Drivers
++#
++# CONFIG_VIRTIO_MMIO is not set
++
++#
++# 1-Wire support
++#
++# CONFIG_W1 is not set
++
++#
++# 1-wire EEPROM support
++#
++# CONFIG_W1_EEPROM is not set
++
++#
++# Watchdog Timer Support
++#
++# CONFIG_WATCHDOG is not set
++CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
++# CONFIG_IMX_WATCHDOG is not set
++# CONFIG_ULP_WATCHDOG is not set
++# CONFIG_WDT is not set
++# CONFIG_PHYS_TO_BUS is not set
++
++#
++# File systems
++#
++# CONFIG_FS_BTRFS is not set
++# CONFIG_FS_CBFS is not set
++# CONFIG_FS_EXT4 is not set
++CONFIG_FS_FAT=y
++CONFIG_FAT_WRITE=y
++CONFIG_FS_FAT_MAX_CLUSTSIZE=65536
++# CONFIG_FS_JFFS2 is not set
++CONFIG_UBIFS_SILENCE_MSG=y
++CONFIG_UBIFS_SILENCE_DEBUG_DUMP=y
++# CONFIG_FS_CRAMFS is not set
++# CONFIG_YAFFS2 is not set
++# CONFIG_FS_SQUASHFS is not set
++# CONFIG_FS_EROFS is not set
++
++#
++# Library routines
++#
++# CONFIG_ADDR_MAP is not set
++# CONFIG_SYS_TIMER_COUNTS_DOWN is not set
++# CONFIG_PHYSMEM is not set
++# CONFIG_BCH is not set
++# CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED is not set
++CONFIG_CHARSET=y
++# CONFIG_DYNAMIC_CRC_TABLE is not set
++CONFIG_LIB_UUID=y
++# CONFIG_SEMIHOSTING is not set
++CONFIG_PRINTF=y
++CONFIG_SPRINTF=y
++CONFIG_STRTO=y
++CONFIG_SYS_HZ=1000
++# CONFIG_PANIC_HANG is not set
++CONFIG_REGEX=y
++CONFIG_LIB_RAND=y
++# CONFIG_LIB_HW_RAND is not set
++CONFIG_SUPPORT_ACPI=y
++# CONFIG_ACPI is not set
++CONFIG_RBTREE=y
++# CONFIG_BITREVERSE is not set
++# CONFIG_TRACE is not set
++# CONFIG_CIRCBUF is not set
++# CONFIG_CMD_DHRYSTONE is not set
++
++#
++# Security support
++#
++# CONFIG_AES is not set
++# CONFIG_ECDSA is not set
++# CONFIG_RSA is not set
++# CONFIG_TPM is not set
++
++#
++# Android Verified Boot
++#
++
++#
++# Hashing Support
++#
++# CONFIG_BLAKE2 is not set
++CONFIG_SHA1=y
++CONFIG_SHA256=y
++# CONFIG_SHA512 is not set
++# CONFIG_SHA384 is not set
++# CONFIG_SHA_HW_ACCEL is not set
++CONFIG_MD5=y
++CONFIG_CRC8=y
++CONFIG_CRC32=y
++
++#
++# Compression Support
++#
++# CONFIG_LZ4 is not set
++CONFIG_LZMA=y
++CONFIG_LZO=y
++CONFIG_GZIP=y
++# CONFIG_ZLIB_UNCOMPRESS is not set
++# CONFIG_BZIP2 is not set
++CONFIG_ZLIB=y
++# CONFIG_ZSTD is not set
++CONFIG_VPL_LZMA=y
++# CONFIG_SPL_GZIP is not set
++# CONFIG_ERRNO_STR is not set
++CONFIG_HEXDUMP=y
++# CONFIG_GETOPT is not set
++CONFIG_OF_LIBFDT=y
++CONFIG_OF_LIBFDT_ASSUME_MASK=0x0
++CONFIG_SYS_FDT_PAD=0x3000
++
++#
++# System tables
++#
++CONFIG_GENERATE_SMBIOS_TABLE=y
++# CONFIG_LIB_RATIONAL is not set
++CONFIG_SMBIOS=y
++# CONFIG_SMBIOS_PARSER is not set
++CONFIG_EFI_LOADER=y
++CONFIG_CMD_BOOTEFI_BOOTMGR=y
++CONFIG_EFI_VARIABLE_FILE_STORE=y
++# CONFIG_EFI_VARIABLE_NO_STORE is not set
++# CONFIG_EFI_VARIABLES_PRESEED is not set
++CONFIG_EFI_VAR_BUF_SIZE=131072
++# CONFIG_EFI_SCROLL_ON_CLEAR_SCREEN is not set
++# CONFIG_EFI_RUNTIME_UPDATE_CAPSULE is not set
++CONFIG_EFI_CAPSULE_MAX=15
++CONFIG_EFI_DEVICE_PATH_TO_TEXT=y
++CONFIG_EFI_DEVICE_PATH_UTIL=y
++CONFIG_EFI_DT_FIXUP=y
++CONFIG_EFI_LOADER_HII=y
++CONFIG_EFI_UNICODE_COLLATION_PROTOCOL2=y
++CONFIG_EFI_UNICODE_CAPITALIZATION=y
++# CONFIG_EFI_LOADER_BOUNCE_BUFFER is not set
++CONFIG_EFI_PLATFORM_LANG_CODES="en-US"
++CONFIG_EFI_HAVE_RUNTIME_RESET=y
++CONFIG_EFI_LOAD_FILE2_INITRD=y
++CONFIG_EFI_ECPT=y
++CONFIG_EFI_EBBR_2_1_CONFORMANCE=y
++# CONFIG_OPTEE_LIB is not set
++# CONFIG_OPTEE_IMAGE is not set
++# CONFIG_BOOTM_OPTEE is not set
++# CONFIG_TEST_FDTDEC is not set
++CONFIG_LIB_ELF=y
++CONFIG_LMB=y
++CONFIG_LMB_USE_MAX_REGIONS=y
++CONFIG_LMB_MAX_REGIONS=64
++# CONFIG_PHANDLE_CHECK_SEQ is not set
++
++#
++# Testing
++#
++# CONFIG_UNIT_TEST is not set
++# CONFIG_POST is not set
++
++#
++# Tools options
++#
++CONFIG_MKIMAGE_DTC_PATH="dtc"
++CONFIG_TOOLS_CRC32=y
++# CONFIG_TOOLS_LIBCRYPTO is not set
++CONFIG_TOOLS_FIT=y
++CONFIG_TOOLS_FIT_FULL_CHECK=y
++CONFIG_TOOLS_FIT_PRINT=y
++CONFIG_TOOLS_FIT_RSASSA_PSS=y
++CONFIG_TOOLS_FIT_SIGNATURE=y
++CONFIG_TOOLS_FIT_SIGNATURE_MAX_SIZE=0x10000000
++CONFIG_TOOLS_FIT_VERBOSE=y
++CONFIG_TOOLS_MD5=y
++CONFIG_TOOLS_OF_LIBFDT=y
++CONFIG_TOOLS_SHA1=y
++CONFIG_TOOLS_SHA256=y
++CONFIG_TOOLS_SHA384=y
++CONFIG_TOOLS_SHA512=y
++# CONFIG_TOOLS_MKEFICAPSULE is not set
++# CONFIG_FSPI_CONF_HEADER is not set
++# CONFIG_TOOLS_MKFWUMDATA is not set
+--- /dev/null
++++ b/configs/mt7981_openwrt-one-spi-nand_defconfig
+@@ -0,0 +1,1815 @@
++#
++# Automatically generated file; DO NOT EDIT.
++# U-Boot 2024.01 Configuration
++#
++
++#
++# Compiler: aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r25206+8-d5e2177a6b) 12.3.0
++#
++CONFIG_CREATE_ARCH_SYMLINK=y
++CONFIG_SYS_CACHE_SHIFT_6=y
++CONFIG_SYS_CACHELINE_SIZE=64
++CONFIG_LINKER_LIST_ALIGN=8
++# CONFIG_ARC is not set
++CONFIG_ARM=y
++# CONFIG_M68K is not set
++# CONFIG_MICROBLAZE is not set
++# CONFIG_MIPS is not set
++# CONFIG_NIOS2 is not set
++# CONFIG_PPC is not set
++# CONFIG_RISCV is not set
++# CONFIG_SANDBOX is not set
++# CONFIG_SH is not set
++# CONFIG_X86 is not set
++# CONFIG_XTENSA is not set
++CONFIG_SYS_ARCH="arm"
++CONFIG_SYS_CPU="armv8"
++CONFIG_SYS_SOC="mediatek"
++CONFIG_SYS_VENDOR="mediatek"
++CONFIG_SYS_BOARD="mt7981"
++CONFIG_SYS_CONFIG_NAME="mt7981"
++
++#
++# Skipping low level initialization functions
++#
++# CONFIG_SKIP_LOWLEVEL_INIT is not set
++# CONFIG_SKIP_LOWLEVEL_INIT_ONLY is not set
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_SYS_NONCACHED_MEMORY=0x100000
++# CONFIG_SYS_ICACHE_OFF is not set
++# CONFIG_SYS_DCACHE_OFF is not set
++
++#
++# ARM architecture
++#
++CONFIG_ARM64=y
++CONFIG_ARM64_CRC32=y
++CONFIG_COUNTER_FREQUENCY=0
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_INIT_SP_RELATIVE=y
++CONFIG_SYS_INIT_SP_BSS_OFFSET=524288
++# CONFIG_GIC_V3_ITS is not set
++CONFIG_STATIC_RELA=y
++CONFIG_DMA_ADDR_T_64BIT=y
++CONFIG_GPIO_EXTRA_HEADER=y
++CONFIG_ARM_ASM_UNIFIED=y
++# CONFIG_SYS_ARM_CACHE_CP15 is not set
++# CONFIG_SYS_ARM_MMU is not set
++# CONFIG_SYS_ARM_MPU is not set
++CONFIG_SYS_ARM_ARCH=8
++CONFIG_SYS_ARM_CACHE_WRITEBACK=y
++# CONFIG_SYS_ARM_CACHE_WRITETHROUGH is not set
++# CONFIG_SYS_ARM_CACHE_WRITEALLOC is not set
++# CONFIG_ARCH_CPU_INIT is not set
++CONFIG_SYS_ARCH_TIMER=y
++CONFIG_ARM_SMCCC=y
++# CONFIG_SYS_L2_PL310 is not set
++# CONFIG_SPL_SYS_L2_PL310 is not set
++# CONFIG_SYS_L2CACHE_OFF is not set
++# CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK is not set
++# CONFIG_USE_ARCH_MEMCPY is not set
++# CONFIG_USE_ARCH_MEMSET is not set
++CONFIG_ARM64_SUPPORT_AARCH32=y
++# CONFIG_ARCH_AT91 is not set
++# CONFIG_ARCH_DAVINCI is not set
++# CONFIG_ARCH_HISTB is not set
++# CONFIG_ARCH_KIRKWOOD is not set
++# CONFIG_ARCH_MVEBU is not set
++# CONFIG_ARCH_ORION5X is not set
++# CONFIG_TARGET_STV0991 is not set
++# CONFIG_ARCH_BCM283X is not set
++# CONFIG_ARCH_BCMSTB is not set
++# CONFIG_ARCH_BCMBCA is not set
++# CONFIG_TARGET_VEXPRESS_CA9X4 is not set
++# CONFIG_TARGET_BCMNS is not set
++# CONFIG_TARGET_BCMNS2 is not set
++# CONFIG_TARGET_BCMNS3 is not set
++# CONFIG_ARCH_EXYNOS is not set
++# CONFIG_ARCH_S5PC1XX is not set
++# CONFIG_ARCH_HIGHBANK is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_IPQ40XX is not set
++# CONFIG_ARCH_KEYSTONE is not set
++# CONFIG_ARCH_K3 is not set
++# CONFIG_ARCH_OMAP2PLUS is not set
++# CONFIG_ARCH_MESON is not set
++CONFIG_ARCH_MEDIATEK=y
++# CONFIG_ARCH_LPC32XX is not set
++# CONFIG_ARCH_IMX8 is not set
++# CONFIG_ARCH_IMX8M is not set
++# CONFIG_ARCH_IMX8ULP is not set
++# CONFIG_ARCH_IMX9 is not set
++# CONFIG_ARCH_IMXRT is not set
++# CONFIG_ARCH_MX23 is not set
++# CONFIG_ARCH_MX28 is not set
++# CONFIG_ARCH_MX31 is not set
++# CONFIG_ARCH_MX7ULP is not set
++# CONFIG_ARCH_MX7 is not set
++# CONFIG_ARCH_MX6 is not set
++# CONFIG_ARCH_MX5 is not set
++# CONFIG_ARCH_NEXELL is not set
++# CONFIG_ARCH_NPCM is not set
++# CONFIG_ARCH_APPLE is not set
++# CONFIG_ARCH_OWL is not set
++# CONFIG_ARCH_QEMU is not set
++# CONFIG_ARCH_RMOBILE is not set
++# CONFIG_ARCH_SNAPDRAGON is not set
++# CONFIG_ARCH_SOCFPGA is not set
++# CONFIG_ARCH_SUNXI is not set
++# CONFIG_ARCH_U8500 is not set
++# CONFIG_ARCH_VERSAL is not set
++# CONFIG_ARCH_VERSAL_NET is not set
++# CONFIG_ARCH_VF610 is not set
++# CONFIG_ARCH_ZYNQ is not set
++# CONFIG_ARCH_ZYNQMP_R5 is not set
++# CONFIG_ARCH_ZYNQMP is not set
++# CONFIG_ARCH_TEGRA is not set
++# CONFIG_ARCH_VEXPRESS64 is not set
++# CONFIG_TARGET_CORSTONE1000 is not set
++# CONFIG_TARGET_TOTAL_COMPUTE is not set
++# CONFIG_TARGET_LS2080A_EMU is not set
++# CONFIG_TARGET_LS1088AQDS is not set
++# CONFIG_TARGET_LS2080AQDS is not set
++# CONFIG_TARGET_LS2080ARDB is not set
++# CONFIG_TARGET_LS2081ARDB is not set
++# CONFIG_TARGET_LX2160ARDB is not set
++# CONFIG_TARGET_LX2160AQDS is not set
++# CONFIG_TARGET_LX2162AQDS is not set
++# CONFIG_TARGET_HIKEY is not set
++# CONFIG_TARGET_HIKEY960 is not set
++# CONFIG_TARGET_POPLAR is not set
++# CONFIG_TARGET_LS1012AQDS is not set
++# CONFIG_TARGET_LS1012ARDB is not set
++# CONFIG_TARGET_LS1012A2G5RDB is not set
++# CONFIG_TARGET_LS1012AFRWY is not set
++# CONFIG_TARGET_LS1012AFRDM is not set
++# CONFIG_TARGET_LS1028AQDS is not set
++# CONFIG_TARGET_LS1028ARDB is not set
++# CONFIG_TARGET_LS1088ARDB is not set
++# CONFIG_TARGET_LS1021AQDS is not set
++# CONFIG_TARGET_LS1021ATWR is not set
++# CONFIG_TARGET_PG_WCOM_SELI8 is not set
++# CONFIG_TARGET_PG_WCOM_EXPU1 is not set
++# CONFIG_TARGET_LS1021ATSN is not set
++# CONFIG_TARGET_LS1021AIOT is not set
++# CONFIG_TARGET_LS1043AQDS is not set
++# CONFIG_TARGET_LS1043ARDB is not set
++# CONFIG_TARGET_LS1046AQDS is not set
++# CONFIG_TARGET_LS1046ARDB is not set
++# CONFIG_TARGET_LS1046AFRWY is not set
++# CONFIG_TARGET_SL28 is not set
++# CONFIG_TARGET_TEN64 is not set
++# CONFIG_ARCH_UNIPHIER is not set
++# CONFIG_ARCH_SYNQUACER is not set
++# CONFIG_ARCH_STM32 is not set
++# CONFIG_ARCH_STI is not set
++# CONFIG_ARCH_STM32MP is not set
++# CONFIG_ARCH_ROCKCHIP is not set
++# CONFIG_ARCH_OCTEONTX is not set
++# CONFIG_ARCH_OCTEONTX2 is not set
++# CONFIG_TARGET_THUNDERX_88XX is not set
++# CONFIG_ARCH_ASPEED is not set
++# CONFIG_TARGET_DURIAN is not set
++# CONFIG_TARGET_POMELO is not set
++# CONFIG_TARGET_PRESIDIO_ASIC is not set
++# CONFIG_TARGET_XENGUEST_ARM64 is not set
++# CONFIG_ARCH_GXP is not set
++# CONFIG_STATIC_MACH_TYPE is not set
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_LEN=0x400000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_ENV_SOURCE_FILE=""
++CONFIG_SF_DEFAULT_SPEED=1000000
++CONFIG_SF_DEFAULT_MODE=0x0
++CONFIG_ENV_SIZE=0x1f000
++CONFIG_DM_GPIO=y
++CONFIG_DEFAULT_DEVICE_TREE="openwrt-one"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_MULTI_DTB_FIT_UNCOMPRESS_SZ=0x8000
++CONFIG_DM_RESET=y
++CONFIG_SYS_MONITOR_LEN=0
++# CONFIG_MT8512 is not set
++# CONFIG_TARGET_MT7622 is not set
++# CONFIG_TARGET_MT7623 is not set
++# CONFIG_TARGET_MT7629 is not set
++CONFIG_TARGET_MT7981=y
++# CONFIG_TARGET_MT7986 is not set
++# CONFIG_TARGET_MT7988 is not set
++# CONFIG_TARGET_MT8183 is not set
++# CONFIG_TARGET_MT8512 is not set
++# CONFIG_TARGET_MT8516 is not set
++# CONFIG_TARGET_MT8518 is not set
++CONFIG_MTK_BROM_HEADER_INFO="media=snand;nandinfo=2k+64"
++CONFIG_RESET_BUTTON_LABEL="back"
++CONFIG_RESET_BUTTON_SETTLE_DELAY=0
++CONFIG_ERR_PTR_OFFSET=0x0
++# CONFIG_SPL is not set
++CONFIG_BOOTSTAGE_STASH_ADDR=0x0
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++# CONFIG_DEBUG_UART_BOARD_INIT is not set
++CONFIG_IDENT_STRING=""
++CONFIG_SYS_CLK_FREQ=0
++# CONFIG_CHIP_DIP_SCAN is not set
++# CONFIG_CMO_BY_VA_ONLY is not set
++# CONFIG_ARMV8_MULTIENTRY is not set
++# CONFIG_ARMV8_SET_SMPEN is not set
++# CONFIG_ARMV8_SWITCH_TO_EL1 is not set
++
++#
++# ARMv8 secure monitor firmware
++#
++# CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT is not set
++CONFIG_PSCI_RESET=y
++# CONFIG_ARMV8_PSCI is not set
++# CONFIG_ARMV8_EA_EL3_FIRST is not set
++# CONFIG_ARMV8_CRYPTO is not set
++# CONFIG_CMD_DEKBLOB is not set
++# CONFIG_IMX_CAAM_DEK_ENCAP is not set
++# CONFIG_IMX_OPTEE_DEK_ENCAP is not set
++# CONFIG_IMX_SECO_DEK_ENCAP is not set
++# CONFIG_IMX_ELE_DEK_ENCAP is not set
++# CONFIG_CMD_HDMIDETECT is not set
++CONFIG_IMX_DCD_ADDR=0x00910000
++CONFIG_SYS_MEM_TOP_HIDE=0x0
++CONFIG_SYS_LOAD_ADDR=0x46000000
++
++#
++# ARM debug
++#
++CONFIG_BUILD_TARGET=""
++# CONFIG_PCI is not set
++CONFIG_FWU_NUM_BANKS=2
++CONFIG_FWU_NUM_IMAGES_PER_BANK=2
++CONFIG_DEBUG_UART=y
++# CONFIG_AHCI is not set
++# CONFIG_OF_BOARD_FIXUP is not set
++
++#
++# Functionality shared between NXP SoCs
++#
++# CONFIG_NXP_ESBC is not set
++
++#
++# General setup
++#
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_CC_IS_GCC=y
++CONFIG_GCC_VERSION=120300
++CONFIG_CLANG_VERSION=0
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++# CONFIG_CC_OPTIMIZE_FOR_SPEED is not set
++# CONFIG_CC_OPTIMIZE_FOR_DEBUG is not set
++# CONFIG_OPTIMIZE_INLINING is not set
++CONFIG_ARCH_SUPPORTS_LTO=y
++# CONFIG_LTO is not set
++CONFIG_CC_HAS_ASM_INLINE=y
++# CONFIG_XEN is not set
++# CONFIG_ENV_VARS_UBOOT_CONFIG is not set
++# CONFIG_SYS_BOOT_GET_CMDLINE is not set
++# CONFIG_SYS_BOOT_GET_KBD is not set
++CONFIG_SYS_MALLOC_F=y
++# CONFIG_VALGRIND is not set
++CONFIG_EXPERT=y
++CONFIG_SYS_MALLOC_CLEAR_ON_INIT=y
++# CONFIG_SYS_MALLOC_DEFAULT_TO_INIT is not set
++# CONFIG_TOOLS_DEBUG is not set
++CONFIG_PHYS_64BIT=y
++CONFIG_FDT_64BIT=y
++# CONFIG_REMAKE_ELF is not set
++# CONFIG_HAS_BOARD_SIZE_LIMIT is not set
++# CONFIG_SYS_CUSTOM_LDSCRIPT is not set
++CONFIG_PLATFORM_ELFENTRY="_start"
++CONFIG_STACK_SIZE=0x1000000
++CONFIG_SYS_SRAM_BASE=0x0
++CONFIG_SYS_SRAM_SIZE=0x0
++# CONFIG_MP is not set
++CONFIG_HAVE_TEXT_BASE=y
++# CONFIG_HAVE_SYS_UBOOT_START is not set
++CONFIG_SYS_UBOOT_START=0x41e00000
++# CONFIG_DYNAMIC_SYS_CLK_FREQ is not set
++# CONFIG_API is not set
++
++#
++# Boot options
++#
++
++#
++# Boot images
++#
++# CONFIG_ANDROID_BOOT_IMAGE is not set
++# CONFIG_TIMESTAMP is not set
++CONFIG_FIT=y
++CONFIG_FIT_EXTERNAL_OFFSET=0x0
++CONFIG_FIT_FULL_CHECK=y
++# CONFIG_FIT_SIGNATURE is not set
++# CONFIG_FIT_CIPHER is not set
++# CONFIG_FIT_VERBOSE is not set
++# CONFIG_FIT_BEST_MATCH is not set
++CONFIG_FIT_PRINT=y
++# CONFIG_SPL_LOAD_FIT_FULL is not set
++CONFIG_PXE_UTILS=y
++CONFIG_BOOTSTD=y
++# CONFIG_BOOTSTD_FULL is not set
++# CONFIG_BOOTSTD_DEFAULTS is not set
++CONFIG_BOOTSTD_BOOTCOMMAND=y
++CONFIG_BOOTMETH_GLOBAL=y
++# CONFIG_BOOTMETH_CROS is not set
++CONFIG_BOOTMETH_EXTLINUX=y
++CONFIG_BOOTMETH_EXTLINUX_PXE=y
++CONFIG_BOOTMETH_EFILOADER=y
++CONFIG_BOOTMETH_VBE=y
++CONFIG_BOOTMETH_VBE_REQUEST=y
++CONFIG_BOOTMETH_VBE_SIMPLE=y
++CONFIG_BOOTMETH_VBE_SIMPLE_OS=y
++# CONFIG_BOOTMETH_SCRIPT is not set
++CONFIG_LEGACY_IMAGE_FORMAT=y
++# CONFIG_SUPPORT_RAW_INITRD is not set
++# CONFIG_CHROMEOS is not set
++# CONFIG_CHROMEOS_VBOOT is not set
++# CONFIG_RAMBOOT_PBL is not set
++CONFIG_SYS_BOOT_RAMDISK_HIGH=y
++# CONFIG_DISTRO_DEFAULTS is not set
++
++#
++# Boot timing
++#
++# CONFIG_BOOTSTAGE is not set
++CONFIG_BOOTSTAGE_STASH_SIZE=0x1000
++# CONFIG_SHOW_BOOT_PROGRESS is not set
++
++#
++# Boot media
++#
++CONFIG_NAND_BOOT=y
++# CONFIG_ONENAND_BOOT is not set
++# CONFIG_QSPI_BOOT is not set
++# CONFIG_SATA_BOOT is not set
++# CONFIG_SD_BOOT is not set
++# CONFIG_SD_BOOT_QSPI is not set
++CONFIG_SPI_BOOT=y
++
++#
++# Autoboot options
++#
++CONFIG_AUTOBOOT=y
++CONFIG_BOOTDELAY=2
++# CONFIG_AUTOBOOT_KEYED is not set
++# CONFIG_AUTOBOOT_USE_MENUKEY is not set
++CONFIG_AUTOBOOT_MENU_SHOW=y
++# CONFIG_BOOTMENU_DISABLE_UBOOT_CONSOLE is not set
++# CONFIG_BOOT_RETRY is not set
++
++#
++# Image support
++#
++# CONFIG_IMAGE_PRE_LOAD is not set
++
++#
++# Devicetree fixup
++#
++# CONFIG_OF_BOARD_SETUP is not set
++# CONFIG_OF_SYSTEM_SETUP is not set
++# CONFIG_OF_STDOUT_VIA_ALIAS is not set
++# CONFIG_FDT_FIXUP_PARTITIONS is not set
++# CONFIG_FDT_SIMPLEFB is not set
++CONFIG_ARCH_FIXUP_FDT_MEMORY=y
++# CONFIG_USE_BOOTARGS is not set
++# CONFIG_BOOTARGS_SUBST is not set
++# CONFIG_USE_BOOTCOMMAND is not set
++CONFIG_USE_PREBOOT=y
++CONFIG_DEFAULT_FDT_FILE="openwrt-one"
++# CONFIG_SAVE_PREV_BL_FDT_ADDR is not set
++# CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR is not set
++
++#
++# Configuration editor
++#
++# CONFIG_CEDIT is not set
++
++#
++# Console
++#
++CONFIG_MENU=y
++# CONFIG_CONSOLE_RECORD is not set
++# CONFIG_DISABLE_CONSOLE is not set
++CONFIG_LOGLEVEL=7
++# CONFIG_SILENT_CONSOLE is not set
++# CONFIG_SPL_SILENT_CONSOLE is not set
++# CONFIG_TPL_SILENT_CONSOLE is not set
++# CONFIG_PRE_CONSOLE_BUFFER is not set
++CONFIG_CONSOLE_FLUSH_SUPPORT=y
++# CONFIG_CONSOLE_FLUSH_ON_NEWLINE is not set
++# CONFIG_CONSOLE_MUX is not set
++# CONFIG_SYS_CONSOLE_IS_IN_ENV is not set
++# CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE is not set
++# CONFIG_SYS_CONSOLE_INFO_QUIET is not set
++# CONFIG_SYS_STDIO_DEREGISTER is not set
++# CONFIG_SPL_SYS_STDIO_DEREGISTER is not set
++# CONFIG_SYS_DEVICE_NULLDEV is not set
++
++#
++# Logging
++#
++CONFIG_LOG=y
++CONFIG_LOG_MAX_LEVEL=6
++CONFIG_LOG_DEFAULT_LEVEL=6
++CONFIG_LOG_CONSOLE=y
++# CONFIG_LOGF_FILE is not set
++# CONFIG_LOGF_LINE is not set
++# CONFIG_LOGF_FUNC is not set
++CONFIG_LOGF_FUNC_PAD=20
++# CONFIG_LOG_SYSLOG is not set
++# CONFIG_LOG_ERROR_RETURN is not set
++
++#
++# Init options
++#
++# CONFIG_BOARD_TYPES is not set
++CONFIG_DISPLAY_CPUINFO=y
++CONFIG_DISPLAY_BOARDINFO=y
++# CONFIG_DISPLAY_BOARDINFO_LATE is not set
++
++#
++# Start-up hooks
++#
++# CONFIG_CYCLIC is not set
++CONFIG_EVENT=y
++CONFIG_EVENT_DYNAMIC=y
++# CONFIG_EVENT_DEBUG is not set
++# CONFIG_ARCH_MISC_INIT is not set
++# CONFIG_BOARD_EARLY_INIT_F is not set
++# CONFIG_BOARD_EARLY_INIT_R is not set
++# CONFIG_BOARD_POSTCLK_INIT is not set
++CONFIG_BOARD_LATE_INIT=y
++# CONFIG_CLOCKS is not set
++# CONFIG_HWCONFIG is not set
++CONFIG_LAST_STAGE_INIT=y
++# CONFIG_MISC_INIT_R is not set
++# CONFIG_SYS_MALLOC_BOOTPARAMS is not set
++# CONFIG_ID_EEPROM is not set
++# CONFIG_RESET_PHY_R is not set
++
++#
++# Security support
++#
++CONFIG_HASH=y
++# CONFIG_STACKPROTECTOR is not set
++# CONFIG_BOARD_RNG_SEED is not set
++
++#
++# Update support
++#
++# CONFIG_UPDATE_TFTP is not set
++# CONFIG_ANDROID_AB is not set
++
++#
++# Blob list
++#
++# CONFIG_BLOBLIST is not set
++CONFIG_SUPPORT_SPL=y
++# CONFIG_VPL is not set
++
++#
++# Command line interface
++#
++CONFIG_CMDLINE=y
++CONFIG_HUSH_PARSER=y
++CONFIG_CMDLINE_EDITING=y
++# CONFIG_CMDLINE_PS_SUPPORT is not set
++CONFIG_AUTO_COMPLETE=y
++CONFIG_SYS_LONGHELP=y
++CONFIG_SYS_PROMPT="OpenWrt One> "
++CONFIG_SYS_PROMPT_HUSH_PS2="> "
++CONFIG_SYS_MAXARGS=16
++CONFIG_SYS_CBSIZE=512
++CONFIG_SYS_PBSIZE=1049
++CONFIG_SYS_XTRACE=y
++CONFIG_BUILD_BIN2C=y
++
++#
++# Commands
++#
++
++#
++# Info commands
++#
++CONFIG_CMD_BDI=y
++# CONFIG_CMD_BDINFO_EXTRA is not set
++# CONFIG_CMD_CONFIG is not set
++CONFIG_CMD_CONSOLE=y
++CONFIG_CMD_CPU=y
++# CONFIG_CMD_HISTORY is not set
++CONFIG_CMD_LICENSE=y
++# CONFIG_CMD_PMC is not set
++
++#
++# Boot commands
++#
++CONFIG_CMD_BOOTD=y
++CONFIG_CMD_BOOTM=y
++# CONFIG_CMD_BOOTDEV is not set
++CONFIG_CMD_BOOTFLOW=y
++# CONFIG_CMD_BOOTMETH is not set
++CONFIG_BOOTM_EFI=y
++# CONFIG_CMD_BOOTZ is not set
++CONFIG_CMD_BOOTI=y
++CONFIG_BOOTM_LINUX=y
++# CONFIG_BOOTM_NETBSD is not set
++# CONFIG_BOOTM_OPENRTOS is not set
++# CONFIG_BOOTM_OSE is not set
++# CONFIG_BOOTM_PLAN9 is not set
++# CONFIG_BOOTM_RTEMS is not set
++# CONFIG_CMD_VBE is not set
++# CONFIG_BOOTM_VXWORKS is not set
++CONFIG_SYS_BOOTM_LEN=0x4000000
++CONFIG_CMD_BOOTEFI=y
++CONFIG_CMD_BOOTEFI_HELLO_COMPILE=y
++# CONFIG_CMD_BOOTEFI_HELLO is not set
++# CONFIG_CMD_BOOTEFI_SELFTEST is not set
++CONFIG_CMD_BOOTMENU=y
++# CONFIG_CMD_ADTIMG is not set
++CONFIG_CMD_ELF=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_GO=y
++CONFIG_CMD_RUN=y
++CONFIG_CMD_IMI=y
++# CONFIG_CMD_IMLS is not set
++CONFIG_CMD_XIMG=y
++# CONFIG_CMD_ZBOOT is not set
++
++#
++# Environment commands
++#
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_EXPORTENV=y
++CONFIG_CMD_IMPORTENV=y
++CONFIG_CMD_EDITENV=y
++# CONFIG_CMD_GREPENV is not set
++CONFIG_CMD_SAVEENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_EXISTS=y
++CONFIG_CMD_ENV_READMEM=y
++# CONFIG_CMD_ENV_CALLBACK is not set
++CONFIG_CMD_ENV_FLAGS=y
++# CONFIG_CMD_NVEDIT_EFI is not set
++# CONFIG_CMD_NVEDIT_INDIRECT is not set
++# CONFIG_CMD_NVEDIT_INFO is not set
++# CONFIG_CMD_NVEDIT_LOAD is not set
++# CONFIG_CMD_NVEDIT_SELECT is not set
++
++#
++# Memory commands
++#
++# CONFIG_CMD_BINOP is not set
++# CONFIG_CMD_BLOBLIST is not set
++CONFIG_CMD_CRC32=y
++# CONFIG_CRC32_VERIFY is not set
++# CONFIG_CMD_EEPROM is not set
++# CONFIG_LOOPW is not set
++# CONFIG_CMD_MD5SUM is not set
++# CONFIG_CMD_MEMINFO is not set
++CONFIG_CMD_MEMORY=y
++# CONFIG_CMD_MEM_SEARCH is not set
++# CONFIG_CMD_MX_CYCLIC is not set
++CONFIG_CMD_RANDOM=y
++# CONFIG_CMD_MEMTEST is not set
++# CONFIG_CMD_SHA1SUM is not set
++CONFIG_CMD_STRINGS=y
++
++#
++# Compression commands
++#
++CONFIG_CMD_LZMADEC=y
++# CONFIG_CMD_UNLZ4 is not set
++# CONFIG_CMD_UNZIP is not set
++# CONFIG_CMD_ZIP is not set
++
++#
++# Device access commands
++#
++# CONFIG_CMD_ARMFLASH is not set
++# CONFIG_CMD_BIND is not set
++# CONFIG_CMD_CLK is not set
++# CONFIG_CMD_DEMO is not set
++# CONFIG_CMD_DFU is not set
++CONFIG_CMD_DM=y
++CONFIG_CMD_FLASH=y
++# CONFIG_CMD_FPGAD is not set
++# CONFIG_CMD_FUSE is not set
++CONFIG_CMD_GPIO=y
++# CONFIG_CMD_GPIO_READ is not set
++CONFIG_CMD_PWM=y
++# CONFIG_CMD_GPT is not set
++# CONFIG_RANDOM_UUID is not set
++# CONFIG_CMD_IDE is not set
++# CONFIG_CMD_IO is not set
++# CONFIG_CMD_IOTRACE is not set
++# CONFIG_CMD_I2C is not set
++CONFIG_CMD_LOADB=y
++# CONFIG_CMD_LOADM is not set
++CONFIG_CMD_LOADS=y
++# CONFIG_LOADS_ECHO is not set
++# CONFIG_CMD_SAVES is not set
++# CONFIG_SYS_LOADS_BAUD_CHANGE is not set
++CONFIG_CMD_LOADXY_TIMEOUT=90
++# CONFIG_CMD_LSBLK is not set
++# CONFIG_CMD_MBR is not set
++# CONFIG_CMD_CLONE is not set
++CONFIG_CMD_MTD=y
++CONFIG_CMD_NAND_EXT=y
++# CONFIG_CMD_ONENAND is not set
++# CONFIG_CMD_OSD is not set
++# CONFIG_CMD_PART is not set
++CONFIG_CMD_PCI=y
++CONFIG_CMD_PINMUX=y
++# CONFIG_CMD_POWEROFF is not set
++# CONFIG_CMD_READ is not set
++# CONFIG_CMD_SATA is not set
++# CONFIG_CMD_SDRAM is not set
++CONFIG_CMD_SF=y
++CONFIG_CMD_SF_TEST=y
++# CONFIG_CMD_SPI is not set
++# CONFIG_CMD_TSI148 is not set
++# CONFIG_CMD_UNIVERSE is not set
++CONFIG_CMD_USB=y
++# CONFIG_CMD_USB_SDP is not set
++# CONFIG_CMD_RKMTD is not set
++# CONFIG_CMD_WRITE is not set
++
++#
++# Shell scripting commands
++#
++# CONFIG_CMD_CAT is not set
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_SETEXPR=y
++# CONFIG_CMD_SETEXPR_FMT is not set
++# CONFIG_CMD_XXD is not set
++
++#
++# Android support commands
++#
++CONFIG_CMD_NET=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_DHCP=y
++# CONFIG_BOOTP_MAY_FAIL is not set
++CONFIG_BOOTP_BOOTPATH=y
++# CONFIG_BOOTP_VENDOREX is not set
++# CONFIG_BOOTP_BOOTFILESIZE is not set
++CONFIG_BOOTP_DNS=y
++# CONFIG_BOOTP_DNS2 is not set
++CONFIG_BOOTP_GATEWAY=y
++CONFIG_BOOTP_HOSTNAME=y
++# CONFIG_BOOTP_PREFER_SERVERIP is not set
++CONFIG_BOOTP_SUBNETMASK=y
++# CONFIG_BOOTP_NISDOMAIN is not set
++# CONFIG_BOOTP_NTPSERVER is not set
++# CONFIG_BOOTP_TIMEOFFSET is not set
++# CONFIG_CMD_PCAP is not set
++CONFIG_BOOTP_PXE=y
++CONFIG_BOOTP_PXE_CLIENTARCH=0x16
++# CONFIG_BOOTP_PXE_DHCP_OPTION is not set
++CONFIG_BOOTP_VCI_STRING="U-Boot.armv8"
++CONFIG_CMD_TFTPBOOT=y
++# CONFIG_CMD_TFTPPUT is not set
++CONFIG_CMD_TFTPSRV=y
++CONFIG_NET_TFTP_VARS=y
++CONFIG_CMD_RARP=y
++# CONFIG_CMD_NFS is not set
++# CONFIG_SYS_DISABLE_AUTOLOAD is not set
++# CONFIG_CMD_WGET is not set
++# CONFIG_CMD_MII is not set
++# CONFIG_CMD_MDIO is not set
++CONFIG_CMD_PING=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_LINK_LOCAL=y
++# CONFIG_CMD_ETHSW is not set
++CONFIG_CMD_PXE=y
++# CONFIG_CMD_WOL is not set
++
++#
++# Misc commands
++#
++# CONFIG_CMD_2048 is not set
++# CONFIG_CMD_BSP is not set
++CONFIG_CMD_BLOCK_CACHE=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++# CONFIG_CMD_CONITRACE is not set
++# CONFIG_CMD_CLS is not set
++# CONFIG_CMD_EFIDEBUG is not set
++CONFIG_CMD_EFICONFIG=y
++# CONFIG_CMD_EXCEPTION is not set
++CONFIG_CMD_LED=y
++# CONFIG_CMD_INI is not set
++# CONFIG_CMD_DATE is not set
++# CONFIG_CMD_TIME is not set
++# CONFIG_CMD_GETTIME is not set
++# CONFIG_CMD_PAUSE is not set
++CONFIG_CMD_SLEEP=y
++# CONFIG_CMD_TIMER is not set
++# CONFIG_CMD_SYSBOOT is not set
++# CONFIG_CMD_QFW is not set
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_PSTORE_MEM_SIZE=0x10000
++CONFIG_CMD_PSTORE_RECORD_SIZE=0x1000
++CONFIG_CMD_PSTORE_CONSOLE_SIZE=0x1000
++CONFIG_CMD_PSTORE_FTRACE_SIZE=0x1000
++CONFIG_CMD_PSTORE_PMSG_SIZE=0x1000
++CONFIG_CMD_PSTORE_ECC_SIZE=0
++# CONFIG_CMD_TERMINAL is not set
++CONFIG_CMD_UUID=y
++
++#
++# TI specific command line interface
++#
++
++#
++# Power commands
++#
++
++#
++# Security commands
++#
++# CONFIG_CMD_AES is not set
++# CONFIG_CMD_BLOB is not set
++CONFIG_CMD_HASH=y
++# CONFIG_CMD_HVC is not set
++CONFIG_CMD_SMC=y
++# CONFIG_HASH_VERIFY is not set
++
++#
++# Firmware commands
++#
++
++#
++# Filesystem commands
++#
++# CONFIG_CMD_BTRFS is not set
++# CONFIG_CMD_EROFS is not set
++# CONFIG_CMD_EXT2 is not set
++# CONFIG_CMD_EXT4 is not set
++CONFIG_CMD_FAT=y
++# CONFIG_CMD_SQUASHFS is not set
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++# CONFIG_CMD_JFFS2 is not set
++# CONFIG_CMD_MTDPARTS is not set
++CONFIG_MTDIDS_DEFAULT=""
++CONFIG_MTDPARTS_DEFAULT=""
++# CONFIG_CMD_REISER is not set
++# CONFIG_CMD_ZFS is not set
++
++#
++# Debug commands
++#
++# CONFIG_CMD_DIAG is not set
++# CONFIG_CMD_EVENT is not set
++# CONFIG_CMD_LOG is not set
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_CMD_UBIFS=y
++
++#
++# Partition Types
++#
++CONFIG_PARTITIONS=y
++# CONFIG_MAC_PARTITION is not set
++CONFIG_DOS_PARTITION=y
++# CONFIG_ISO_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++CONFIG_PARTITION_UUIDS=y
++CONFIG_SUPPORT_OF_CONTROL=y
++
++#
++# Device Tree Control
++#
++CONFIG_OF_CONTROL=y
++CONFIG_OF_REAL=y
++# CONFIG_OF_LIVE is not set
++CONFIG_OF_SEPARATE=y
++# CONFIG_OF_EMBED is not set
++# CONFIG_OF_BOARD is not set
++# CONFIG_OF_OMIT_DTB is not set
++CONFIG_DEVICE_TREE_INCLUDES=""
++CONFIG_OF_LIST="openwrt-one"
++# CONFIG_MULTI_DTB_FIT is not set
++CONFIG_OF_TAG_MIGRATE=y
++# CONFIG_OF_DTB_PROPS_REMOVE is not set
++
++#
++# Environment
++#
++CONFIG_ENV_SUPPORT=y
++CONFIG_SAVEENV=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_MIN_ENTRIES=64
++CONFIG_ENV_MAX_ENTRIES=512
++# CONFIG_ENV_IS_NOWHERE is not set
++# CONFIG_ENV_IS_IN_EEPROM is not set
++# CONFIG_ENV_IS_IN_FAT is not set
++# CONFIG_ENV_IS_IN_EXT4 is not set
++# CONFIG_ENV_IS_IN_FLASH is not set
++# CONFIG_ENV_IS_IN_MTD is not set
++# CONFIG_ENV_IS_IN_NAND is not set
++# CONFIG_ENV_IS_IN_NVRAM is not set
++# CONFIG_ENV_IS_IN_ONENAND is not set
++# CONFIG_ENV_IS_IN_REMOTE is not set
++# CONFIG_ENV_IS_IN_SPI_FLASH is not set
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++# CONFIG_ENV_UBI_VOLUME_CREATE is not set
++CONFIG_ENV_UBI_VID_OFFSET=0
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_DEFAULT_ENV_FILE="openwrt-one-spi-nand_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++# CONFIG_ENV_IMPORT_FDT is not set
++# CONFIG_ENV_APPEND is not set
++# CONFIG_ENV_WRITEABLE_LIST is not set
++# CONFIG_ENV_ACCESS_IGNORE_FORCE is not set
++# CONFIG_USE_BOOTFILE is not set
++# CONFIG_USE_ETHPRIME is not set
++# CONFIG_USE_HOSTNAME is not set
++# CONFIG_VERSION_VARIABLE is not set
++CONFIG_NET=y
++CONFIG_ARP_TIMEOUT=5000
++CONFIG_NET_RETRY_COUNT=5
++CONFIG_PROT_UDP=y
++CONFIG_BOOTDEV_ETH=y
++# CONFIG_BOOTP_SEND_HOSTNAME is not set
++CONFIG_NET_RANDOM_ETHADDR=y
++# CONFIG_NETCONSOLE is not set
++# CONFIG_IP_DEFRAG is not set
++# CONFIG_SYS_FAULT_ECHO_LINK_DOWN is not set
++CONFIG_TFTP_BLOCKSIZE=1468
++# CONFIG_TFTP_PORT is not set
++CONFIG_TFTP_WINDOWSIZE=1
++# CONFIG_TFTP_TSIZE is not set
++# CONFIG_SERVERIP_FROM_PROXYDHCP is not set
++CONFIG_SERVERIP_FROM_PROXYDHCP_DELAY_MS=100
++# CONFIG_KEEP_SERVERADDR is not set
++# CONFIG_UDP_CHECKSUM is not set
++# CONFIG_BOOTP_SERVERIP is not set
++CONFIG_BOOTP_MAX_ROOT_PATH_LEN=64
++# CONFIG_USE_GATEWAYIP is not set
++# CONFIG_USE_IPADDR is not set
++# CONFIG_USE_NETMASK is not set
++# CONFIG_USE_ROOTPATH is not set
++# CONFIG_USE_SERVERIP is not set
++# CONFIG_PROT_TCP is not set
++# CONFIG_IPV6 is not set
++CONFIG_SYS_RX_ETH_BUFFER=4
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_DM=y
++# CONFIG_DM_WARN is not set
++# CONFIG_DM_DEBUG is not set
++# CONFIG_DM_STATS is not set
++CONFIG_DM_DEVICE_REMOVE=y
++CONFIG_DM_EVENT=y
++CONFIG_DM_STDIO=y
++CONFIG_DM_SEQ_ALIAS=y
++# CONFIG_DM_DMA is not set
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++# CONFIG_DEVRES is not set
++CONFIG_SIMPLE_BUS=y
++# CONFIG_SIMPLE_BUS_CORRECT_RANGE is not set
++# CONFIG_SIMPLE_PM_BUS is not set
++CONFIG_OF_TRANSLATE=y
++# CONFIG_TRANSLATION_OFFSET is not set
++CONFIG_DM_DEV_READ_INLINE=y
++# CONFIG_OFNODE_MULTI_TREE is not set
++# CONFIG_BOUNCE_BUFFER is not set
++# CONFIG_ADC is not set
++# CONFIG_ADC_EXYNOS is not set
++# CONFIG_ADC_SANDBOX is not set
++# CONFIG_SARADC_MESON is not set
++# CONFIG_SARADC_ROCKCHIP is not set
++# CONFIG_SATA is not set
++# CONFIG_SCSI_AHCI is not set
++
++#
++# SATA/SCSI device support
++#
++# CONFIG_AXI is not set
++
++#
++# Bus devices
++#
++CONFIG_BLK=y
++CONFIG_BLOCK_CACHE=y
++# CONFIG_BLKMAP is not set
++# CONFIG_EFI_MEDIA is not set
++# CONFIG_IDE is not set
++# CONFIG_LBA48 is not set
++# CONFIG_SYS_64BIT_LBA is not set
++# CONFIG_RKMTD is not set
++# CONFIG_BOOTCOUNT_LIMIT is not set
++
++#
++# Button Support
++#
++CONFIG_BUTTON=y
++# CONFIG_BUTTON_ADC is not set
++CONFIG_BUTTON_GPIO=y
++
++#
++# Cache Controller drivers
++#
++# CONFIG_CACHE is not set
++# CONFIG_L2X0_CACHE is not set
++# CONFIG_V5L2_CACHE is not set
++# CONFIG_NCORE_CACHE is not set
++# CONFIG_SIFIVE_CCACHE is not set
++
++#
++# Clock
++#
++CONFIG_CLK=y
++# CONFIG_CLK_CCF is not set
++# CONFIG_CLK_GPIO is not set
++# CONFIG_CLK_CDCE9XX is not set
++# CONFIG_CLK_ICS8N3QV01 is not set
++# CONFIG_CLK_K210 is not set
++# CONFIG_CLK_MPC83XX is not set
++# CONFIG_CLK_XLNX_CLKWZRD is not set
++# CONFIG_CLK_AT91 is not set
++# CONFIG_CLK_RCAR is not set
++# CONFIG_CLK_RCAR_CPG_LIB is not set
++# CONFIG_CLK_SIFIVE is not set
++# CONFIG_CLK_TI_AM3_DPLL is not set
++# CONFIG_CLK_TI_CTRL is not set
++# CONFIG_CLK_TI_GATE is not set
++# CONFIG_CLK_K3 is not set
++CONFIG_CPU=y
++# CONFIG_CPU_IMX is not set
++
++#
++# Hardware crypto devices
++#
++# CONFIG_DM_HASH is not set
++# CONFIG_FSL_CAAM is not set
++CONFIG_CAAM_64BIT=y
++# CONFIG_SYS_FSL_SEC_BE is not set
++# CONFIG_SYS_FSL_SEC_LE is not set
++# CONFIG_NPCM_AES is not set
++# CONFIG_NPCM_SHA is not set
++# CONFIG_DDR_SPD is not set
++# CONFIG_IMX_SNPS_DDR_PHY is not set
++
++#
++# Demo for driver model
++#
++# CONFIG_DM_DEMO is not set
++
++#
++# DFU support
++#
++
++#
++# DMA Support
++#
++# CONFIG_DMA is not set
++# CONFIG_DMA_LPC32XX is not set
++# CONFIG_TI_EDMA3 is not set
++# CONFIG_DMA_LEGACY is not set
++
++#
++# Extcon Support
++#
++# CONFIG_EXTCON is not set
++
++#
++# Fastboot support
++#
++# CONFIG_UDP_FUNCTION_FASTBOOT is not set
++# CONFIG_TCP_FUNCTION_FASTBOOT is not set
++CONFIG_FIRMWARE=y
++CONFIG_ARM_PSCI_FW=y
++# CONFIG_ZYNQMP_FIRMWARE is not set
++# CONFIG_ARM_SMCCC_FEATURES is not set
++# CONFIG_ARM_FFA_TRANSPORT is not set
++# CONFIG_SCMI_FIRMWARE is not set
++# CONFIG_DM_FUZZING_ENGINE is not set
++
++#
++# FPGA support
++#
++# CONFIG_FPGA_ALTERA is not set
++# CONFIG_FPGA_SOCFPGA is not set
++# CONFIG_FPGA_LATTICE is not set
++# CONFIG_FPGA_XILINX is not set
++# CONFIG_DM_FPGA is not set
++# CONFIG_FWU_MDATA is not set
++CONFIG_GPIO=y
++CONFIG_GPIO_HOG=y
++# CONFIG_DM_GPIO_LOOKUP_LABEL is not set
++# CONFIG_ALTERA_PIO is not set
++# CONFIG_BCM2835_GPIO is not set
++# CONFIG_DWAPB_GPIO is not set
++# CONFIG_AT91_GPIO is not set
++# CONFIG_ATMEL_PIO4 is not set
++# CONFIG_ASPEED_GPIO is not set
++# CONFIG_DA8XX_GPIO is not set
++# CONFIG_HIKEY_GPIO is not set
++# CONFIG_INTEL_BROADWELL_GPIO is not set
++# CONFIG_INTEL_GPIO is not set
++# CONFIG_INTEL_ICH6_GPIO is not set
++# CONFIG_IMX_RGPIO2P is not set
++# CONFIG_IPROC_GPIO is not set
++# CONFIG_HSDK_CREG_GPIO is not set
++# CONFIG_KIRKWOOD_GPIO is not set
++# CONFIG_LPC32XX_GPIO is not set
++# CONFIG_MCP230XX_GPIO is not set
++# CONFIG_MSM_GPIO is not set
++# CONFIG_MXC_GPIO is not set
++# CONFIG_MXS_GPIO is not set
++# CONFIG_NPCM_GPIO is not set
++# CONFIG_CMD_PCA953X is not set
++# CONFIG_ROCKCHIP_GPIO is not set
++# CONFIG_XILINX_GPIO is not set
++# CONFIG_TCA642X is not set
++# CONFIG_TEGRA_GPIO is not set
++# CONFIG_TEGRA186_GPIO is not set
++# CONFIG_VYBRID_GPIO is not set
++# CONFIG_SIFIVE_GPIO is not set
++# CONFIG_ZYNQ_GPIO is not set
++# CONFIG_DM_74X164 is not set
++# CONFIG_PCA953X is not set
++# CONFIG_MPC8XXX_GPIO is not set
++# CONFIG_MPC8XX_GPIO is not set
++# CONFIG_NX_GPIO is not set
++# CONFIG_NOMADIK_GPIO is not set
++# CONFIG_ZYNQMP_GPIO_MODEPIN is not set
++# CONFIG_SLG7XL45106_I2C_GPO is not set
++# CONFIG_TURRIS_OMNIA_MCU is not set
++# CONFIG_FTGPIO010 is not set
++
++#
++# Hardware Spinlock Support
++#
++# CONFIG_DM_HWSPINLOCK is not set
++CONFIG_I2C=y
++# CONFIG_DM_I2C is not set
++# CONFIG_SYS_I2C_LEGACY is not set
++# CONFIG_SPL_SYS_I2C_LEGACY is not set
++# CONFIG_SYS_I2C_FSL is not set
++# CONFIG_SYS_I2C_DW is not set
++# CONFIG_SYS_I2C_IMX_LPI2C is not set
++# CONFIG_SYS_I2C_MTK is not set
++# CONFIG_SYS_I2C_MICROCHIP is not set
++# CONFIG_SYS_I2C_MXC is not set
++# CONFIG_SYS_I2C_NPCM is not set
++# CONFIG_SYS_I2C_SOFT is not set
++# CONFIG_SYS_I2C_MV is not set
++# CONFIG_SYS_I2C_MVTWSI is not set
++CONFIG_INPUT=y
++# CONFIG_DM_KEYBOARD is not set
++# CONFIG_CROS_EC_KEYB is not set
++# CONFIG_TEGRA_KEYBOARD is not set
++# CONFIG_TWL4030_INPUT is not set
++
++#
++# IOMMU device drivers
++#
++# CONFIG_IOMMU is not set
++
++#
++# LED Support
++#
++CONFIG_LED=y
++# CONFIG_LED_PWM is not set
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++# CONFIG_LED_STATUS is not set
++
++#
++# Mailbox Controller Support
++#
++# CONFIG_DM_MAILBOX is not set
++
++#
++# Memory Controller drivers
++#
++# CONFIG_MEMORY is not set
++# CONFIG_ATMEL_EBI is not set
++# CONFIG_MFD_ATMEL_SMC is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MISC is not set
++# CONFIG_NVMEM is not set
++# CONFIG_SPL_NVMEM is not set
++# CONFIG_SMSC_LPC47M is not set
++# CONFIG_SMSC_SIO1007 is not set
++# CONFIG_CROS_EC is not set
++# CONFIG_DS4510 is not set
++# CONFIG_FSL_SEC_MON is not set
++# CONFIG_IRQ is not set
++# CONFIG_NPCM_HOST is not set
++# CONFIG_NUVOTON_NCT6102D is not set
++# CONFIG_PWRSEQ is not set
++# CONFIG_PCA9551_LED is not set
++# CONFIG_TEST_DRV is not set
++# CONFIG_USB_HUB_USB251XB is not set
++# CONFIG_TWL4030_LED is not set
++# CONFIG_WINBOND_W83627 is not set
++# CONFIG_FS_LOADER is not set
++
++#
++# MMC Host controller Support
++#
++# CONFIG_MMC is not set
++# CONFIG_MMC_BROKEN_CD is not set
++# CONFIG_DM_MMC is not set
++# CONFIG_FSL_ESDHC is not set
++# CONFIG_FSL_ESDHC_IMX is not set
++
++#
++# MTD Support
++#
++CONFIG_MTD_PARTITIONS=y
++CONFIG_MTD=y
++CONFIG_DM_MTD=y
++# CONFIG_MTD_NOR_FLASH is not set
++# CONFIG_MTD_CONCAT is not set
++# CONFIG_SYS_MTDPARTS_RUNTIME is not set
++# CONFIG_FLASH_CFI_DRIVER is not set
++# CONFIG_CFI_FLASH is not set
++# CONFIG_ALTERA_QSPI is not set
++# CONFIG_HBMC_AM654 is not set
++# CONFIG_SAMSUNG_ONENAND is not set
++# CONFIG_USE_SYS_MAX_FLASH_BANKS is not set
++CONFIG_MTD_NAND_CORE=y
++# CONFIG_MTD_RAW_NAND is not set
++CONFIG_MTD_SPI_NAND=y
++
++#
++# SPI Flash Support
++#
++CONFIG_DM_SPI_FLASH=y
++CONFIG_SPI_FLASH=y
++CONFIG_SF_DEFAULT_BUS=0
++CONFIG_SF_DEFAULT_CS=0
++# CONFIG_BOOTDEV_SPI_FLASH is not set
++CONFIG_SPI_FLASH_SFDP_SUPPORT=y
++CONFIG_SPI_FLASH_SMART_HWCAPS=y
++# CONFIG_SPI_NOR_BOOT_SOFT_RESET_EXT_INVERT is not set
++# CONFIG_SPI_FLASH_SOFT_RESET is not set
++# CONFIG_SPI_FLASH_BAR is not set
++CONFIG_SPI_FLASH_LOCK=y
++CONFIG_SPI_FLASH_UNLOCK_ALL=y
++# CONFIG_SPI_FLASH_ATMEL is not set
++CONFIG_SPI_FLASH_EON=y
++CONFIG_SPI_FLASH_GIGADEVICE=y
++CONFIG_SPI_FLASH_ISSI=y
++CONFIG_SPI_FLASH_MACRONIX=y
++CONFIG_SPI_FLASH_SPANSION=y
++# CONFIG_SPI_FLASH_S28HX_T is not set
++CONFIG_SPI_FLASH_STMICRO=y
++# CONFIG_SPI_FLASH_MT35XU is not set
++# CONFIG_SPI_FLASH_SST is not set
++CONFIG_SPI_FLASH_WINBOND=y
++CONFIG_SPI_FLASH_XMC=y
++CONFIG_SPI_FLASH_XTX=y
++# CONFIG_SPI_FLASH_ZBIT is not set
++CONFIG_SPI_FLASH_USE_4K_SECTORS=y
++# CONFIG_SPI_FLASH_DATAFLASH is not set
++CONFIG_SPI_FLASH_MTD=y
++
++#
++# UBI support
++#
++CONFIG_UBI_SILENCE_MSG=y
++CONFIG_MTD_UBI=y
++CONFIG_MTD_UBI_MODULE=y
++CONFIG_MTD_UBI_WL_THRESHOLD=4096
++CONFIG_MTD_UBI_BEB_LIMIT=20
++# CONFIG_MTD_UBI_FASTMAP is not set
++# CONFIG_NVMXIP is not set
++# CONFIG_NVMXIP_QSPI is not set
++# CONFIG_NMBM is not set
++
++#
++# Multiplexer drivers
++#
++# CONFIG_MULTIPLEXER is not set
++# CONFIG_BITBANGMII is not set
++# CONFIG_MV88E6352_SWITCH is not set
++CONFIG_PHYLIB=y
++# CONFIG_PHY_ADDR_ENABLE is not set
++# CONFIG_B53_SWITCH is not set
++# CONFIG_MV88E61XX_SWITCH is not set
++# CONFIG_PHYLIB_10G is not set
++# CONFIG_PHY_ADIN is not set
++# CONFIG_PHY_AIROHA is not set
++# CONFIG_PHY_AQUANTIA is not set
++# CONFIG_PHY_ATHEROS is not set
++# CONFIG_SPL_PHY_ATHEROS is not set
++# CONFIG_PHY_BROADCOM is not set
++# CONFIG_PHY_CORTINA is not set
++# CONFIG_PHY_DAVICOM is not set
++# CONFIG_PHY_ET1011C is not set
++# CONFIG_PHY_LXT is not set
++# CONFIG_PHY_MARVELL is not set
++# CONFIG_PHY_MARVELL_10G is not set
++# CONFIG_PHY_MESON_GXL is not set
++# CONFIG_PHY_MICREL is not set
++# CONFIG_PHY_MOTORCOMM is not set
++# CONFIG_PHY_MSCC is not set
++# CONFIG_PHY_NATSEMI is not set
++# CONFIG_PHY_NXP_C45_TJA11XX is not set
++# CONFIG_PHY_NXP_TJA11XX is not set
++# CONFIG_PHY_REALTEK is not set
++# CONFIG_PHY_SMSC is not set
++# CONFIG_PHY_TERANETICS is not set
++# CONFIG_PHY_TI is not set
++# CONFIG_PHY_TI_DP83867 is not set
++# CONFIG_PHY_TI_DP83869 is not set
++# CONFIG_PHY_TI_GENERIC is not set
++# CONFIG_PHY_VITESSE is not set
++# CONFIG_PHY_XILINX is not set
++# CONFIG_PHY_XILINX_GMII2RGMII is not set
++# CONFIG_PHY_XWAY is not set
++# CONFIG_PHY_ETHERNET_ID is not set
++CONFIG_PHY_FIXED=y
++# CONFIG_PHY_NCSI is not set
++# CONFIG_FSL_MEMAC is not set
++CONFIG_PHY_RESET_DELAY=0
++# CONFIG_FSL_PFE is not set
++CONFIG_ETH=y
++CONFIG_DM_ETH=y
++# CONFIG_DM_MDIO is not set
++# CONFIG_DM_ETH_PHY is not set
++CONFIG_NETDEVICES=y
++# CONFIG_PHY_GIGE is not set
++# CONFIG_ALTERA_TSE is not set
++# CONFIG_BCM_SF2_ETH is not set
++# CONFIG_BCMGENET is not set
++# CONFIG_BNXT_ETH is not set
++# CONFIG_CALXEDA_XGMAC is not set
++# CONFIG_DRIVER_DM9000 is not set
++# CONFIG_DWC_ETH_QOS is not set
++# CONFIG_EEPRO100 is not set
++# CONFIG_ETH_DESIGNWARE is not set
++# CONFIG_ETH_DESIGNWARE_MESON8B is not set
++# CONFIG_ETHOC is not set
++# CONFIG_FMAN_ENET is not set
++# CONFIG_FTMAC100 is not set
++# CONFIG_FTGMAC100 is not set
++# CONFIG_MCFFEC is not set
++# CONFIG_FSLDMAFEC is not set
++# CONFIG_KS8851_MLL is not set
++# CONFIG_LITEETH is not set
++# CONFIG_MACB is not set
++# CONFIG_NET_NPCM750 is not set
++# CONFIG_PCH_GBE is not set
++# CONFIG_RGMII is not set
++# CONFIG_MII is not set
++# CONFIG_RMII is not set
++# CONFIG_PCNET is not set
++# CONFIG_QE_UEC is not set
++# CONFIG_RTL8139 is not set
++# CONFIG_SMC911X is not set
++# CONFIG_SUN7I_GMAC is not set
++# CONFIG_SUN4I_EMAC is not set
++# CONFIG_SUN8I_EMAC is not set
++# CONFIG_SH_ETHER is not set
++# CONFIG_DRIVER_TI_CPSW is not set
++# CONFIG_DRIVER_TI_EMAC is not set
++# CONFIG_DRIVER_TI_KEYSTONE_NET is not set
++# CONFIG_TULIP is not set
++# CONFIG_XILINX_AXIEMAC is not set
++# CONFIG_VSC7385_ENET is not set
++# CONFIG_XILINX_EMACLITE is not set
++# CONFIG_ZYNQ_GEM is not set
++# CONFIG_SYS_DPAA_QBMAN is not set
++# CONFIG_TSEC_ENET is not set
++CONFIG_MEDIATEK_ETH=y
++# CONFIG_HIFEMAC_ETH is not set
++# CONFIG_HIGMACV300_ETH is not set
++# CONFIG_NVME is not set
++# CONFIG_NVME_APPLE is not set
++
++#
++# PCI Endpoint
++#
++# CONFIG_PCI_ENDPOINT is not set
++# CONFIG_X86_PCH7 is not set
++# CONFIG_X86_PCH9 is not set
++
++#
++# PHY Subsystem
++#
++CONFIG_PHY=y
++# CONFIG_NOP_PHY is not set
++# CONFIG_MIPI_DPHY_HELPERS is not set
++# CONFIG_BCM_SR_PCIE_PHY is not set
++# CONFIG_OMAP_USB2_PHY is not set
++CONFIG_PHY_MTK_TPHY=y
++
++#
++# Rockchip PHY driver
++#
++# CONFIG_PHY_CADENCE_SIERRA is not set
++# CONFIG_PHY_CADENCE_TORRENT is not set
++# CONFIG_MSM8916_USB_PHY is not set
++# CONFIG_MVEBU_COMPHY_SUPPORT is not set
++
++#
++# Pin controllers
++#
++CONFIG_PINCTRL=y
++CONFIG_PINCTRL_FULL=y
++CONFIG_PINCTRL_GENERIC=y
++CONFIG_PINMUX=y
++CONFIG_PINCONF=y
++CONFIG_PINCONF_RECURSIVE=y
++# CONFIG_PINCTRL_AT91 is not set
++# CONFIG_PINCTRL_AT91PIO4 is not set
++# CONFIG_PINCTRL_INTEL is not set
++# CONFIG_PINCTRL_QE is not set
++# CONFIG_PINCTRL_ROCKCHIP_RV1108 is not set
++# CONFIG_PINCTRL_SINGLE is not set
++# CONFIG_PINCTRL_STM32 is not set
++# CONFIG_PINCTRL_STMFX is not set
++# CONFIG_PINCTRL_K210 is not set
++CONFIG_PINCTRL_MTK=y
++# CONFIG_PINCTRL_MT7622 is not set
++# CONFIG_PINCTRL_MT7623 is not set
++# CONFIG_PINCTRL_MT7629 is not set
++CONFIG_PINCTRL_MT7981=y
++# CONFIG_PINCTRL_MT7986 is not set
++# CONFIG_PINCTRL_MT7988 is not set
++# CONFIG_PINCTRL_MT8512 is not set
++# CONFIG_PINCTRL_MT8516 is not set
++# CONFIG_PINCTRL_MT8518 is not set
++CONFIG_POWER=y
++# CONFIG_POWER_LEGACY is not set
++# CONFIG_ACPI_PMC is not set
++
++#
++# Power Domain Support
++#
++CONFIG_POWER_DOMAIN=y
++# CONFIG_APPLE_PMGR_POWER_DOMAIN is not set
++CONFIG_MTK_POWER_DOMAIN=y
++# CONFIG_DM_PMIC is not set
++# CONFIG_PMIC_TPS65217 is not set
++# CONFIG_POWER_TPS65218 is not set
++# CONFIG_POWER_TPS62362 is not set
++# CONFIG_DM_REGULATOR is not set
++# CONFIG_TPS6586X_POWER is not set
++# CONFIG_POWER_MT6323 is not set
++CONFIG_DM_PWM=y
++# CONFIG_PWM_ASPEED is not set
++# CONFIG_PWM_CADENCE_TTC is not set
++# CONFIG_PWM_CROS_EC is not set
++# CONFIG_PWM_EXYNOS is not set
++# CONFIG_PWM_IMX is not set
++# CONFIG_PWM_MESON is not set
++CONFIG_PWM_MTK=y
++# CONFIG_PWM_ROCKCHIP is not set
++# CONFIG_PWM_SANDBOX is not set
++# CONFIG_PWM_SIFIVE is not set
++# CONFIG_PWM_TEGRA is not set
++# CONFIG_PWM_SUNXI is not set
++# CONFIG_U_QE is not set
++# CONFIG_RAM is not set
++
++#
++# Reboot Mode Support
++#
++# CONFIG_DM_REBOOT_MODE is not set
++
++#
++# Remote Processor drivers
++#
++
++#
++# Reset Controller Support
++#
++# CONFIG_RESET_AST2500 is not set
++# CONFIG_RESET_AST2600 is not set
++CONFIG_RESET_MEDIATEK=y
++# CONFIG_RESET_HISILICON is not set
++# CONFIG_RESET_SYSCON is not set
++# CONFIG_RESET_SCMI is not set
++# CONFIG_RESET_DRA7 is not set
++# CONFIG_DM_RNG is not set
++
++#
++# Real Time Clock
++#
++# CONFIG_DM_RTC is not set
++# CONFIG_RTC_ENABLE_32KHZ_OUTPUT is not set
++# CONFIG_RTC_DS1337 is not set
++# CONFIG_RTC_DS1338 is not set
++# CONFIG_RTC_DS1374 is not set
++# CONFIG_RTC_DS3231 is not set
++# CONFIG_RTC_PCF8563 is not set
++# CONFIG_RTC_PT7C4338 is not set
++# CONFIG_RTC_PL031 is not set
++# CONFIG_RTC_S35392A is not set
++# CONFIG_RTC_MC13XXX is not set
++# CONFIG_RTC_MC146818 is not set
++# CONFIG_RTC_M41T62 is not set
++# CONFIG_SCSI is not set
++# CONFIG_DM_SCSI is not set
++CONFIG_SERIAL=y
++CONFIG_BAUDRATE=115200
++# CONFIG_DEFAULT_ENV_IS_RW is not set
++CONFIG_REQUIRE_SERIAL_CONSOLE=y
++# CONFIG_SPECIFY_CONSOLE_INDEX is not set
++CONFIG_SERIAL_PRESENT=y
++CONFIG_DM_SERIAL=y
++# CONFIG_SERIAL_RX_BUFFER is not set
++# CONFIG_SERIAL_PUTS is not set
++# CONFIG_SERIAL_SEARCH_ALL is not set
++# CONFIG_SERIAL_PROBE_ALL is not set
++# CONFIG_VPL_DM_SERIAL is not set
++CONFIG_DEBUG_UART_MTK=y
++CONFIG_DEBUG_UART_SHIFT=0
++# CONFIG_DEBUG_UART_ANNOUNCE is not set
++# CONFIG_DEBUG_UART_SKIP_INIT is not set
++# CONFIG_ALTERA_JTAG_UART is not set
++# CONFIG_ALTERA_UART is not set
++# CONFIG_ARC_SERIAL is not set
++# CONFIG_ARM_DCC is not set
++# CONFIG_ATMEL_USART is not set
++# CONFIG_BCM6345_SERIAL is not set
++# CONFIG_COREBOOT_SERIAL is not set
++# CONFIG_CORTINA_UART is not set
++# CONFIG_FSL_LINFLEXUART is not set
++# CONFIG_FSL_LPUART is not set
++# CONFIG_MVEBU_A3700_UART is not set
++# CONFIG_MCFUART is not set
++# CONFIG_NULLDEV_SERIAL is not set
++# CONFIG_SYS_NS16550 is not set
++# CONFIG_PL01X_SERIAL is not set
++# CONFIG_ROCKCHIP_SERIAL is not set
++# CONFIG_XILINX_UARTLITE is not set
++# CONFIG_MSM_SERIAL is not set
++# CONFIG_MSM_GENI_SERIAL is not set
++# CONFIG_MXS_AUART_SERIAL is not set
++# CONFIG_OMAP_SERIAL is not set
++# CONFIG_SIFIVE_SERIAL is not set
++# CONFIG_ZYNQ_SERIAL is not set
++CONFIG_MTK_SERIAL=y
++# CONFIG_MT7620_SERIAL is not set
++# CONFIG_NPCM_SERIAL is not set
++# CONFIG_SM is not set
++# CONFIG_MESON_SM is not set
++# CONFIG_SMEM is not set
++
++#
++# Sound support
++#
++# CONFIG_SOUND is not set
++
++#
++# SOC (System On Chip) specific Drivers
++#
++# CONFIG_SOC_DEVICE is not set
++# CONFIG_SOC_TI is not set
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_SPI_MEM=y
++# CONFIG_SPI_DIRMAP is not set
++# CONFIG_ALTERA_SPI is not set
++# CONFIG_APPLE_SPI is not set
++# CONFIG_ATCSPI200_SPI is not set
++# CONFIG_ATMEL_SPI is not set
++# CONFIG_BCMSTB_SPI is not set
++# CONFIG_CORTINA_SFLASH is not set
++# CONFIG_CADENCE_QSPI is not set
++# CONFIG_CF_SPI is not set
++# CONFIG_DESIGNWARE_SPI is not set
++# CONFIG_EXYNOS_SPI is not set
++# CONFIG_FSL_DSPI is not set
++# CONFIG_FSL_QSPI is not set
++# CONFIG_GXP_SPI is not set
++# CONFIG_ICH_SPI is not set
++# CONFIG_IPROC_QSPI is not set
++# CONFIG_KIRKWOOD_SPI is not set
++# CONFIG_MICROCHIP_COREQSPI is not set
++# CONFIG_MPC8XXX_SPI is not set
++# CONFIG_MTK_SNOR is not set
++# CONFIG_MTK_SNFI_SPI is not set
++CONFIG_MTK_SPIM=y
++# CONFIG_MVEBU_A3700_SPI is not set
++# CONFIG_MXS_SPI is not set
++# CONFIG_SPI_MXIC is not set
++# CONFIG_NPCM_FIU_SPI is not set
++# CONFIG_NPCM_PSPI is not set
++# CONFIG_NXP_FSPI is not set
++# CONFIG_OMAP3_SPI is not set
++# CONFIG_PL022_SPI is not set
++# CONFIG_ROCKCHIP_SFC is not set
++# CONFIG_ROCKCHIP_SPI is not set
++# CONFIG_SPI_ASPEED_SMC is not set
++# CONFIG_SPI_SIFIVE is not set
++# CONFIG_SOFT_SPI is not set
++# CONFIG_SPI_SN_F_OSPI is not set
++# CONFIG_SPI_SUNXI is not set
++# CONFIG_TEGRA114_SPI is not set
++# CONFIG_TEGRA20_SFLASH is not set
++# CONFIG_TEGRA20_SLINK is not set
++# CONFIG_TEGRA210_QSPI is not set
++# CONFIG_TI_QSPI is not set
++# CONFIG_XILINX_SPI is not set
++# CONFIG_ZYNQ_SPI is not set
++# CONFIG_ZYNQ_QSPI is not set
++# CONFIG_ZYNQMP_GQSPI is not set
++# CONFIG_SH_QSPI is not set
++# CONFIG_MXC_SPI is not set
++
++#
++# SPMI support
++#
++# CONFIG_SPMI is not set
++# CONFIG_SYSINFO is not set
++
++#
++# System reset device drivers
++#
++# CONFIG_SYSRESET is not set
++# CONFIG_TEE is not set
++# CONFIG_DM_THERMAL is not set
++
++#
++# Timer Support
++#
++# CONFIG_TIMER is not set
++
++#
++# TPM support
++#
++CONFIG_USB=y
++CONFIG_DM_USB=y
++# CONFIG_DM_USB_GADGET is not set
++
++#
++# USB Host Controller Drivers
++#
++CONFIG_USB_HOST=y
++CONFIG_USB_XHCI_HCD=y
++# CONFIG_USB_XHCI_DWC3 is not set
++# CONFIG_USB_XHCI_DWC3_OF_SIMPLE is not set
++CONFIG_USB_XHCI_MTK=y
++# CONFIG_USB_XHCI_FSL is not set
++# CONFIG_USB_XHCI_BRCM is not set
++# CONFIG_USB_EHCI_HCD is not set
++# CONFIG_USB_OHCI_HCD is not set
++# CONFIG_USB_UHCI_HCD is not set
++# CONFIG_USB_DWC2 is not set
++# CONFIG_USB_R8A66597_HCD is not set
++# CONFIG_USB_ISP1760 is not set
++# CONFIG_USB_CDNS3 is not set
++# CONFIG_USB_DWC3 is not set
++# CONFIG_USB_MTU3 is not set
++
++#
++# Legacy MUSB Support
++#
++# CONFIG_USB_MUSB_HCD is not set
++# CONFIG_USB_MUSB_UDC is not set
++
++#
++# MUSB Controller Driver
++#
++# CONFIG_USB_MUSB_HOST is not set
++# CONFIG_USB_MUSB_PIO_ONLY is not set
++
++#
++# USB Phy
++#
++# CONFIG_TWL4030_USB is not set
++# CONFIG_ROCKCHIP_USB2_PHY is not set
++
++#
++# ULPI drivers
++#
++
++#
++# USB peripherals
++#
++CONFIG_USB_STORAGE=y
++# CONFIG_USB_KEYBOARD is not set
++# CONFIG_USB_ONBOARD_HUB is not set
++CONFIG_USB_HUB_DEBOUNCE_TIMEOUT=1000
++# CONFIG_USB_HOST_ETHER is not set
++# CONFIG_USB_GADGET is not set
++# CONFIG_SPL_USB_GADGET is not set
++
++#
++# UFS Host Controller Support
++#
++# CONFIG_TI_J721E_UFS is not set
++
++#
++# Graphics support
++#
++# CONFIG_VIDEO is not set
++
++#
++# VirtIO Drivers
++#
++# CONFIG_VIRTIO_MMIO is not set
++
++#
++# 1-Wire support
++#
++# CONFIG_W1 is not set
++
++#
++# 1-wire EEPROM support
++#
++# CONFIG_W1_EEPROM is not set
++
++#
++# Watchdog Timer Support
++#
++# CONFIG_WATCHDOG is not set
++CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
++# CONFIG_IMX_WATCHDOG is not set
++# CONFIG_ULP_WATCHDOG is not set
++# CONFIG_WDT is not set
++# CONFIG_PHYS_TO_BUS is not set
++
++#
++# File systems
++#
++# CONFIG_FS_BTRFS is not set
++# CONFIG_FS_CBFS is not set
++# CONFIG_FS_EXT4 is not set
++CONFIG_FS_FAT=y
++CONFIG_FAT_WRITE=y
++CONFIG_FS_FAT_MAX_CLUSTSIZE=65536
++# CONFIG_FS_JFFS2 is not set
++CONFIG_UBIFS_SILENCE_MSG=y
++CONFIG_UBIFS_SILENCE_DEBUG_DUMP=y
++# CONFIG_FS_CRAMFS is not set
++# CONFIG_YAFFS2 is not set
++# CONFIG_FS_SQUASHFS is not set
++# CONFIG_FS_EROFS is not set
++
++#
++# Library routines
++#
++# CONFIG_ADDR_MAP is not set
++# CONFIG_SYS_TIMER_COUNTS_DOWN is not set
++# CONFIG_PHYSMEM is not set
++# CONFIG_BCH is not set
++# CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED is not set
++CONFIG_CHARSET=y
++# CONFIG_DYNAMIC_CRC_TABLE is not set
++CONFIG_LIB_UUID=y
++# CONFIG_SEMIHOSTING is not set
++CONFIG_PRINTF=y
++CONFIG_SPRINTF=y
++CONFIG_STRTO=y
++CONFIG_SYS_HZ=1000
++# CONFIG_PANIC_HANG is not set
++CONFIG_REGEX=y
++CONFIG_LIB_RAND=y
++# CONFIG_LIB_HW_RAND is not set
++CONFIG_SUPPORT_ACPI=y
++# CONFIG_ACPI is not set
++CONFIG_RBTREE=y
++# CONFIG_BITREVERSE is not set
++# CONFIG_TRACE is not set
++# CONFIG_CIRCBUF is not set
++# CONFIG_CMD_DHRYSTONE is not set
++
++#
++# Security support
++#
++# CONFIG_AES is not set
++# CONFIG_ECDSA is not set
++# CONFIG_RSA is not set
++# CONFIG_TPM is not set
++
++#
++# Android Verified Boot
++#
++
++#
++# Hashing Support
++#
++# CONFIG_BLAKE2 is not set
++CONFIG_SHA1=y
++CONFIG_SHA256=y
++# CONFIG_SHA512 is not set
++# CONFIG_SHA384 is not set
++# CONFIG_SHA_HW_ACCEL is not set
++CONFIG_MD5=y
++CONFIG_CRC8=y
++CONFIG_CRC32=y
++
++#
++# Compression Support
++#
++# CONFIG_LZ4 is not set
++CONFIG_LZMA=y
++CONFIG_LZO=y
++CONFIG_GZIP=y
++# CONFIG_ZLIB_UNCOMPRESS is not set
++# CONFIG_BZIP2 is not set
++CONFIG_ZLIB=y
++# CONFIG_ZSTD is not set
++CONFIG_VPL_LZMA=y
++# CONFIG_SPL_GZIP is not set
++# CONFIG_ERRNO_STR is not set
++CONFIG_HEXDUMP=y
++# CONFIG_GETOPT is not set
++CONFIG_OF_LIBFDT=y
++CONFIG_OF_LIBFDT_ASSUME_MASK=0x0
++CONFIG_SYS_FDT_PAD=0x3000
++
++#
++# System tables
++#
++CONFIG_GENERATE_SMBIOS_TABLE=y
++# CONFIG_LIB_RATIONAL is not set
++CONFIG_SMBIOS=y
++# CONFIG_SMBIOS_PARSER is not set
++CONFIG_EFI_LOADER=y
++CONFIG_CMD_BOOTEFI_BOOTMGR=y
++CONFIG_EFI_VARIABLE_FILE_STORE=y
++# CONFIG_EFI_VARIABLE_NO_STORE is not set
++# CONFIG_EFI_VARIABLES_PRESEED is not set
++CONFIG_EFI_VAR_BUF_SIZE=131072
++# CONFIG_EFI_SCROLL_ON_CLEAR_SCREEN is not set
++# CONFIG_EFI_RUNTIME_UPDATE_CAPSULE is not set
++CONFIG_EFI_CAPSULE_MAX=15
++CONFIG_EFI_DEVICE_PATH_TO_TEXT=y
++CONFIG_EFI_DEVICE_PATH_UTIL=y
++CONFIG_EFI_DT_FIXUP=y
++CONFIG_EFI_LOADER_HII=y
++CONFIG_EFI_UNICODE_COLLATION_PROTOCOL2=y
++CONFIG_EFI_UNICODE_CAPITALIZATION=y
++# CONFIG_EFI_LOADER_BOUNCE_BUFFER is not set
++CONFIG_EFI_PLATFORM_LANG_CODES="en-US"
++CONFIG_EFI_HAVE_RUNTIME_RESET=y
++CONFIG_EFI_LOAD_FILE2_INITRD=y
++CONFIG_EFI_ECPT=y
++CONFIG_EFI_EBBR_2_1_CONFORMANCE=y
++# CONFIG_OPTEE_LIB is not set
++# CONFIG_OPTEE_IMAGE is not set
++# CONFIG_BOOTM_OPTEE is not set
++# CONFIG_TEST_FDTDEC is not set
++CONFIG_LIB_ELF=y
++CONFIG_LMB=y
++CONFIG_LMB_USE_MAX_REGIONS=y
++CONFIG_LMB_MAX_REGIONS=64
++# CONFIG_PHANDLE_CHECK_SEQ is not set
++
++#
++# Testing
++#
++# CONFIG_UNIT_TEST is not set
++# CONFIG_POST is not set
++
++#
++# Tools options
++#
++CONFIG_MKIMAGE_DTC_PATH="dtc"
++CONFIG_TOOLS_CRC32=y
++CONFIG_TOOLS_LIBCRYPTO=y
++CONFIG_TOOLS_FIT=y
++CONFIG_TOOLS_FIT_FULL_CHECK=y
++CONFIG_TOOLS_FIT_PRINT=y
++CONFIG_TOOLS_FIT_RSASSA_PSS=y
++CONFIG_TOOLS_FIT_SIGNATURE=y
++CONFIG_TOOLS_FIT_SIGNATURE_MAX_SIZE=0x10000000
++CONFIG_TOOLS_FIT_VERBOSE=y
++CONFIG_TOOLS_MD5=y
++CONFIG_TOOLS_OF_LIBFDT=y
++CONFIG_TOOLS_SHA1=y
++CONFIG_TOOLS_SHA256=y
++CONFIG_TOOLS_SHA384=y
++CONFIG_TOOLS_SHA512=y
++# CONFIG_TOOLS_MKEFICAPSULE is not set
++# CONFIG_FSPI_CONF_HEADER is not set
++# CONFIG_TOOLS_MKFWUMDATA is not set
+--- /dev/null
++++ b/openwrt-one-nor_env
+@@ -0,0 +1,46 @@
++bl2_mtd_write=mtd erase bl2-nor &&  mtd write bl2-nor $loadaddr 0x0 0x40000
++bl2_tftp_write=tftpboot $loadaddr $bootfile_bl2_nor && run bl2_mtd_write
++bootcmd=run check_button ; run led_start ; mtd read recovery ${loadaddr} ; bootm ; run led_loop_error
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-openwrt_one-initramfs.itb
++bootfile_bl2_nor=openwrt-mediatek-filogic-openwrt_one-nor-preloader.bin
++bootfile_fip_nor=openwrt-mediatek-filogic-openwrt_one-nor-bl31-uboot.fip
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run bootcmd
++bootmenu_1=Boot system via TFTP.=run tftp_boot ; run bootmenu_confirm_return
++bootmenu_2=Unlock NOR. (Make sure the NOR/WP jumper is populated)=sf probe 1:0 && sf protect unlock 0x0 0x1000000 ; run bootmenu_confirm_return
++bootmenu_3=Load BL31+U-Boot FIP via TFTP then write to NOR.=run fip_tftp_write ; run bootmenu_confirm_return
++bootmenu_4=Load BL2 preloader via TFTP then write to NOR.=run bl2_tftp_write ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NOR.=run tftp_write ; run bootmenu_confirm_return
++bootmenu_6=Lock NOR. (Remove jumper afterwards)=sf probe 1:0 && sf protect lock 0x0 0x1000000 ; run bootmenu_confirm_return
++bootmenu_7=Reboot.=reset
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )  [SPI-NOR]
++check_button=if button front ; then run usb_recovery ; run led_loop_error ; fi
++fip_mtd_write=mtd erase fip-nor && mtd write fip-nor $loadaddr
++fip_tftp_write=tftpboot $loadaddr $bootfile_fip_nor && run fip_mtd_write
++ipaddr=192.168.11.11
++led_done=led green off ; led white on
++led_loop_done=led white off ; led green on ; echo done ; while true ; do  sleep 1 ; done
++led_loop_error=led white off ; led green off ; while true ; do led red on ; sleep 1 ; led red off ; sleep 1 ; done
++led_boot=led green on ; led white on ; led red on
++led_start=led green off ; led red off; led white on
++loadaddr=0x46000000
++preboot=run led_boot
++recoverfile_bl2=openwrt-mediatek-filogic-openwrt_one-snand-preloader.bin
++recoverfile_ubi=openwrt-mediatek-filogic-openwrt_one-factory.ubi
++recovery_write_bl2=mtd erase bl2 && for offset in 0x0 0x40000 0x80000; do mtd write bl2 $loadaddr $offset 0x40000 ; done
++recovery_write_ubi=mtd erase ubi && mtd write ubi $loadaddr 0 ${filesize}
++serverip=192.168.11.23
++tftp_boot=run led_start ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++tftp_write=run led_start ; tftpboot $loadaddr $bootfile && mtd erase recovery 0x0 ${filesize} && mtd write recovery $loadaddr 0x0 ${filesize}
++usb_recovery=run led_start ; usb start && run usb_recovery_bl2 && run usb_recovery_ubi && run led_loop_done
++usb_recovery_bl2=fatload usb 0:1 ${loadaddr} ${recoverfile_bl2} && run recovery_write_bl2
++usb_recovery_ubi=fatload usb 0:1 ${loadaddr} ${recoverfile_ubi} && run recovery_write_ubi
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; bootmenu
++_init_env=setenv _init_env ; echo Initialize Env ; run ubi_create_env ; saveenv
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
+--- /dev/null
++++ b/openwrt-one-spi-nand_env
+@@ -0,0 +1,59 @@
++ipaddr=192.168.11.11
++serverip=192.168.11.23
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootcmd=run check_buttons ; run led_start ; run boot_calibration ; run boot_production ; run boot_recovery
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-openwrt_one-initramfs.itb
++bootfile_bl2=openwrt-mediatek-filogic-openwrt_one-snand-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-openwrt_one-snand-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-openwrt_one-squashfs-sysupgrade.itb
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; run led_boot ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )  [SPI-NAND]
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=noboot=1 ; replacevol=1 ; run boot_tftp_production ; noboot= ; replacevol= ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=noboot=1 ; replacevol=1 ; run boot_tftp_recovery ; noboot= ; replacevol= ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_default=run bootcmd ; run boot_recovery ; replacevol=1 ; run boot_tftp_forever
++boot_calibration=ubi read $loadaddr calibration && bootm $loadaddr#$bootconf
++boot_production=led white on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led white off
++boot_recovery=led green on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led green off
++boot_tftp=run led_start ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_forever=led green off ; led white off ; led red on ; while true ; do run boot_tftp_recovery ; led red off ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && test $replacevol = 1 && iminfo $loadaddr && run ubi_write_production ; if test $noboot = 1 ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && test $replacevol = 1 && iminfo $loadaddr && run ubi_write_recovery ; if test $noboot = 1 ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run ubi_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run snand_write_bl2
++check_buttons=if button front ; then run boot_recovery ; run boot_tftp ; run led_loop_error ; else if button back ; then ; run usb_recover ; run led_loop_error ; fi ; fi
++led_boot=led green on ; led white on ; led red on
++led_done=led green on ; led white off ; led red off
++led_loop_error=led white off ; led green off ; while true ; do led red on ; sleep 1 ; led red off ; sleep 1 ; done
++led_start=led white on ; led green off ; led red off
++preboot=run led_boot
++reset_factory=mw $loadaddr 0xff 0x1f000 ; ubi write $loadaddr ubootenv 0x1f000 ; ubi write $loadaddr ubootenv2 0x1f000 ; ubi remove rootfs_data
++snand_write_bl2=mtd erase bl2 && for offset in 0x0 0x40000 0x80000 0xc0000 ; do mtd write bl2 $loadaddr $offset 0x40000 ; done
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x1f000 dynamic ; ubi check ubootenv2 || ubi create ubootenv2 0x1f000 dynamic
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++usb_recover=run led_start ; usb start && run usb_recover_production && run led_loop_done
++usb_recover_production=fatload usb 0:1 ${loadaddr} ${bootfile_upg} && iminfo $loadaddr && run ubi_write_production
++ubi_write_fip=run ubi_remove_rootfs ; ubi check fip && ubi remove fip ; ubi create fip $filesize static && ubi write $loadaddr fip $filesize
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; bootmenu
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"
diff --git a/package/firmware/linux-firmware/realtek.mk b/package/firmware/linux-firmware/realtek.mk
index cd64d79d63..e070725160 100644
--- a/package/firmware/linux-firmware/realtek.mk
+++ b/package/firmware/linux-firmware/realtek.mk
@@ -136,7 +136,7 @@ $(eval $(call BuildPackage,rtl8761bu-firmware))
 Package/rtl8821ae-firmware = $(call Package/firmware-default,RealTek RTL8821AE firmware,,LICENCE.rtlwifi_firmware.txt)
 define Package/rtl8821ae-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8821aefw.bin $(1)/lib/firmware/rtlwifi
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8821aefw_29.bin $(1)/lib/firmware/rtlwifi
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8821aefw_wowlan.bin $(1)/lib/firmware/rtlwifi
 endef
 $(eval $(call BuildPackage,rtl8821ae-firmware))
diff --git a/package/firmware/wireless-regdb/Makefile b/package/firmware/wireless-regdb/Makefile
index a0080bdbfd..5b95ec59de 100644
--- a/package/firmware/wireless-regdb/Makefile
+++ b/package/firmware/wireless-regdb/Makefile
@@ -1,14 +1,14 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wireless-regdb
-PKG_VERSION:=2024.01.23
+PKG_VERSION:=2024.05.08
 PKG_RELEASE:=1
 PKG_LICENSE:=ISC
 PKG_LICENSE_FILES:=LICENSE
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
 PKG_SOURCE_URL:=@KERNEL/software/network/wireless-regdb/
-PKG_HASH:=c8a61c9acf76fa7eb4239e89f640dee3e87098d9f69b4d3518c9c60fc6d20c55
+PKG_HASH:=9aee1d86ebebb363b714bec941b2820f31e3b7f1a485ddc9fcbd9985c7d3e7c4
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 
diff --git a/package/kernel/linux/modules/crypto.mk b/package/kernel/linux/modules/crypto.mk
index 4a8a283d37..638182d712 100644
--- a/package/kernel/linux/modules/crypto.mk
+++ b/package/kernel/linux/modules/crypto.mk
@@ -411,7 +411,7 @@ define KernelPackage/crypto-hw-ixp4xx
   KCONFIG:= \
 	CONFIG_CRYPTO_HW=y \
 	CONFIG_CRYPTO_DEV_IXP4XX
-  FILES:=$(LINUX_DIR)/drivers/crypto/ixp4xx_crypto.ko
+  FILES:=$(LINUX_DIR)/drivers/crypto/intel/ixp4xx/ixp4xx_crypto.ko
   AUTOLOAD:=$(call AutoProbe,ixp4xx_crypto)
   $(call AddDepends/crypto)
 endef
diff --git a/package/kernel/mt76/Makefile b/package/kernel/mt76/Makefile
index 36661ec327..5df553b45b 100644
--- a/package/kernel/mt76/Makefile
+++ b/package/kernel/mt76/Makefile
@@ -8,9 +8,9 @@ PKG_LICENSE_FILES:=
 
 PKG_SOURCE_URL:=https://github.com/openwrt/mt76
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2024-04-03
-PKG_SOURCE_VERSION:=1e336a8582dce2ef32ddd440d423e9afef961e71
-PKG_MIRROR_HASH:=276613540603dc6ece9d2474ae1899b6aaa6ca93bd27824056c9689c725f5890
+PKG_SOURCE_DATE:=2024-05-17
+PKG_SOURCE_VERSION:=513c131c6309712a51502870b041f45b4bd6a6d4
+PKG_MIRROR_HASH:=3e5d8ee6b8b122cc4e32668fdde0552a9fa23819b7ebdc758ecb63b5f761683a
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 PKG_USE_NINJA:=0
@@ -635,6 +635,11 @@ define Package/mt76-test/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/tools/mt76-test $(1)/usr/sbin
 endef
 
+define Build/InstallDev
+	mkdir -p $(STAGING_DIR_IMAGE)
+	$(CP) $(PKG_BUILD_DIR)/firmware/mt7981_eeprom_mt7976_dbdc.bin $(STAGING_DIR_IMAGE)/
+endef
+
 $(eval $(call KernelPackage,mt76-core))
 $(eval $(call KernelPackage,mt76-usb))
 $(eval $(call KernelPackage,mt76x02-usb))
diff --git a/package/libs/libbpf/Makefile b/package/libs/libbpf/Makefile
index 6b894972a7..2105a1c568 100644
--- a/package/libs/libbpf/Makefile
+++ b/package/libs/libbpf/Makefile
@@ -8,13 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libbpf
-PKG_VERSION:=1.4.1
+PKG_VERSION:=1.4.2
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL:=https://github.com/libbpf/libbpf
-PKG_MIRROR_HASH:=46469f720ed246529e46d84a6444ae1c1a1eaf2a717a5a055c9973bb52159ec3
+PKG_MIRROR_HASH:=eaf56a8d4297a1dfb477d91b4fb7c7c5ad6b6df73e0f7ac3c8fd93f2664c2e85
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=v1.4.1
+PKG_SOURCE_VERSION:=v1.4.2
 PKG_ABI_VERSION:=$(firstword $(subst .,$(space),$(PKG_VERSION)))
 
 PKG_MAINTAINER:=Tony Ambardar <itugrok@yahoo.com>
diff --git a/package/network/config/firewall4/Makefile b/package/network/config/firewall4/Makefile
index b0579a2361..7d34924f48 100644
--- a/package/network/config/firewall4/Makefile
+++ b/package/network/config/firewall4/Makefile
@@ -9,9 +9,9 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/firewall4.git
-PKG_SOURCE_DATE:=2023-11-03
-PKG_SOURCE_VERSION:=698a53354fd280aae097efe08803c0c9a10c14c2
-PKG_MIRROR_HASH:=736b3d03cf0db1170242de20776b0095cc37d260108e4313f84eafb46b1be711
+PKG_SOURCE_DATE:=2024-05-21
+PKG_SOURCE_VERSION:=4c01d1ebf99e8ecfa69758a9b4f450ecef7b93cd
+PKG_MIRROR_HASH:=bbc5622bc03e3b43116fcc86e3fa2d2372bfc07b3a00d2b3a6efac4f7454a403
 PKG_MAINTAINER:=Jo-Philipp Wich <jo@mein.io>
 PKG_LICENSE:=ISC
 
diff --git a/package/system/apk/Makefile b/package/system/apk/Makefile
index eecbcdd7e1..0e663d17da 100644
--- a/package/system/apk/Makefile
+++ b/package/system/apk/Makefile
@@ -5,9 +5,9 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://gitlab.alpinelinux.org/alpine/apk-tools.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2024-05-18
-PKG_SOURCE_VERSION:=a6ce0a1be1a42a5cf4136eb0db5ea95168ee73fe
-PKG_MIRROR_HASH:=a5f59907cd742ec12f31f42910ea9a6ecfaf91e18218a7888836a01cfa272a72
+PKG_SOURCE_DATE:=2024-05-19
+PKG_SOURCE_VERSION:=825681118d05ca5801c6b3852a70a42499e57def
+PKG_MIRROR_HASH:=adc07e3320e8d780bbbd3d95d3c6c6ce259f3dbf97ab0a4ff9dc4853af21e04f
 
 PKG_VERSION=3.0.0_pre$(subst -,,$(PKG_SOURCE_DATE))
 
diff --git a/target/imagebuilder/files/Makefile b/target/imagebuilder/files/Makefile
index c032306c8e..7d01bc0e42 100644
--- a/target/imagebuilder/files/Makefile
+++ b/target/imagebuilder/files/Makefile
@@ -159,7 +159,11 @@ _call_manifest: FORCE
 	mkdir -p $(TARGET_DIR) $(BIN_DIR) $(TMP_DIR) $(DL_DIR)
 	$(MAKE) package_reload >/dev/null
 	$(MAKE) package_install >/dev/null
+ifeq ($(CONFIG_USE_APK),)
+	$(OPKG) list-installed $(if $(STRIP_ABI),--strip-abi)
+else
 	$(APK) list --quiet --manifest --no-network
+endif
 
 package_index: FORCE
 	@echo >&2
@@ -202,7 +206,11 @@ endif
 
 package_list: FORCE
 	@$(MAKE) -s package_reload
+ifeq ($(CONFIG_USE_APK),)
+	@$(OPKG) list --size 2>/dev/null
+else
 	@$(APK) list --size 2>/dev/null
+endif
 
 package_install: FORCE
 	@echo
@@ -277,8 +285,6 @@ endif
 
 _check_keys: FORCE
 ifeq ($(CONFIG_USE_APK),)
-	# TODO
-else
 ifneq ($(CONFIG_SIGNATURE_CHECK),)
 	@if [ ! -s $(BUILD_KEY) -o ! -s $(BUILD_KEY).pub ]; then \
 		echo Generate local signing keys... >&2; \
@@ -294,6 +300,8 @@ ifneq ($(CONFIG_SIGNATURE_CHECK),)
 			-s $(BUILD_KEY); \
 	fi
 endif
+else
+	# TODO
 endif
 
 image:
diff --git a/target/linux/gemini/patches-6.6/0003-net-ethernet-cortina-Locking-fixes.patch b/target/linux/gemini/patches-6.6/0003-net-ethernet-cortina-Locking-fixes.patch
new file mode 100644
index 0000000000..661e9287c0
--- /dev/null
+++ b/target/linux/gemini/patches-6.6/0003-net-ethernet-cortina-Locking-fixes.patch
@@ -0,0 +1,73 @@
+From 81889eb2b37bc21df4ff259441e8fc12d4f27cd9 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Thu, 9 May 2024 08:48:31 +0200
+Subject: [PATCH] net: ethernet: cortina: Locking fixes
+
+This fixes a probably long standing problem in the Cortina
+Gemini ethernet driver: there are some paths in the code
+where the IRQ registers are written without taking the proper
+locks.
+
+Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+---
+ drivers/net/ethernet/cortina/gemini.c | 12 ++++++++++--
+ 1 file changed, 10 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/ethernet/cortina/gemini.c
++++ b/drivers/net/ethernet/cortina/gemini.c
+@@ -1107,10 +1107,13 @@ static void gmac_tx_irq_enable(struct ne
+ {
+ 	struct gemini_ethernet_port *port = netdev_priv(netdev);
+ 	struct gemini_ethernet *geth = port->geth;
++	unsigned long flags;
+ 	u32 val, mask;
+ 
+ 	netdev_dbg(netdev, "%s device %d\n", __func__, netdev->dev_id);
+ 
++	spin_lock_irqsave(&geth->irq_lock, flags);
++
+ 	mask = GMAC0_IRQ0_TXQ0_INTS << (6 * netdev->dev_id + txq);
+ 
+ 	if (en)
+@@ -1119,6 +1122,8 @@ static void gmac_tx_irq_enable(struct ne
+ 	val = readl(geth->base + GLOBAL_INTERRUPT_ENABLE_0_REG);
+ 	val = en ? val | mask : val & ~mask;
+ 	writel(val, geth->base + GLOBAL_INTERRUPT_ENABLE_0_REG);
++
++	spin_unlock_irqrestore(&geth->irq_lock, flags);
+ }
+ 
+ static void gmac_tx_irq(struct net_device *netdev, unsigned int txq_num)
+@@ -1415,15 +1420,19 @@ static unsigned int gmac_rx(struct net_d
+ 	union gmac_rxdesc_3 word3;
+ 	struct page *page = NULL;
+ 	unsigned int page_offs;
++	unsigned long flags;
+ 	unsigned short r, w;
+ 	union dma_rwptr rw;
+ 	dma_addr_t mapping;
+ 	int frag_nr = 0;
+ 
++	spin_lock_irqsave(&geth->irq_lock, flags);
+ 	rw.bits32 = readl(ptr_reg);
+ 	/* Reset interrupt as all packages until here are taken into account */
+ 	writel(DEFAULT_Q0_INT_BIT << netdev->dev_id,
+ 	       geth->base + GLOBAL_INTERRUPT_STATUS_1_REG);
++	spin_unlock_irqrestore(&geth->irq_lock, flags);
++
+ 	r = rw.bits.rptr;
+ 	w = rw.bits.wptr;
+ 
+@@ -1726,10 +1735,9 @@ static irqreturn_t gmac_irq(int irq, voi
+ 		gmac_update_hw_stats(netdev);
+ 
+ 	if (val & (GMAC0_RX_OVERRUN_INT_BIT << (netdev->dev_id * 8))) {
++		spin_lock(&geth->irq_lock);
+ 		writel(GMAC0_RXDERR_INT_BIT << (netdev->dev_id * 8),
+ 		       geth->base + GLOBAL_INTERRUPT_STATUS_4_REG);
+-
+-		spin_lock(&geth->irq_lock);
+ 		u64_stats_update_begin(&port->ir_stats_syncp);
+ 		++port->stats.rx_fifo_errors;
+ 		u64_stats_update_end(&port->ir_stats_syncp);
diff --git a/target/linux/gemini/patches-6.6/0004-net-ethernet-cortina-Restore-TSO-support.patch b/target/linux/gemini/patches-6.6/0004-net-ethernet-cortina-Restore-TSO-support.patch
new file mode 100644
index 0000000000..809941a95d
--- /dev/null
+++ b/target/linux/gemini/patches-6.6/0004-net-ethernet-cortina-Restore-TSO-support.patch
@@ -0,0 +1,124 @@
+From 30fcba19ed88997a2909e4a68b4d39ff371357c3 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Wed, 1 May 2024 21:46:31 +0200
+Subject: [PATCH 1/5] net: ethernet: cortina: Restore TSO support
+
+An earlier commit deleted the TSO support in the Cortina Gemini
+driver because the driver was confusing gso_size and MTU,
+probably because what the Linux kernel calls "gso_size" was
+called "MTU" in the datasheet.
+
+Restore the functionality properly reading the gso_size from
+the skbuff.
+
+Tested with iperf3, running a server on a different machine
+and client on the device with the cortina gemini ethernet:
+
+Connecting to host 192.168.1.2, port 5201
+60008000.ethernet-port eth0: segment offloading mss = 05ea len=1c8a
+60008000.ethernet-port eth0: segment offloading mss = 05ea len=1c8a
+60008000.ethernet-port eth0: segment offloading mss = 05ea len=27da
+60008000.ethernet-port eth0: segment offloading mss = 05ea len=0b92
+60008000.ethernet-port eth0: segment offloading mss = 05ea len=2bda
+(...)
+
+(The hardware MSS 0x05ea here includes the ethernet headers.)
+
+If I disable all segment offloading on the receiving host and
+dump packets using tcpdump -xx like this:
+
+ethtool -K enp2s0 gro off gso off tso off
+tcpdump -xx -i enp2s0 host 192.168.1.136
+
+I get segmented packages such as this when running iperf3:
+
+23:16:54.024139 IP OpenWrt.lan.59168 > Fecusia.targus-getdata1:
+Flags [.], seq 1486:2934, ack 1, win 4198,
+options [nop,nop,TS val 3886192908 ecr 3601341877], length 1448
+0x0000:  fc34 9701 a0c6 14d6 4da8 3c4f 0800 4500
+0x0010:  05dc 16a0 4000 4006 9aa1 c0a8 0188 c0a8
+0x0020:  0102 e720 1451 ff25 9822 4c52 29cf 8010
+0x0030:  1066 ac8c 0000 0101 080a e7a2 990c d6a8
+(...)
+0x05c0:  5e49 e109 fe8c 4617 5e18 7a82 7eae d647
+0x05d0:  e8ee ae64 dc88 c897 3f8a 07a4 3a33 6b1b
+0x05e0:  3501 a30f 2758 cc44 4b4a
+
+Several such packets often follow after each other verifying
+the segmentation into 0x05a8 (1448) byte packages also on the
+reveiving end. As can be seen, the ethernet frames are
+0x05ea (1514) in size.
+
+Performance with iperf3 before this patch: ~15.5 Mbit/s
+Performance with iperf3 after this patch: ~175 Mbit/s
+
+This was running a 60 second test (twice) the best measurement
+was 179 Mbit/s.
+
+For comparison if I run iperf3 with UDP I get around 1.05 Mbit/s
+both before and after this patch.
+
+While this is a gigabit ethernet interface, the CPU is a cheap
+D-Link DIR-685 router (based on the ARMv5 Faraday FA526 at
+~50 MHz), and the software is not supposed to drive traffic,
+as the device has a DSA chip, so this kind of numbers can be
+expected.
+
+Fixes: ac631873c9e7 ("net: ethernet: cortina: Drop TSO support")
+Reviewed-by: Eric Dumazet <edumazet@google.com>
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+---
+ drivers/net/ethernet/cortina/gemini.c | 23 +++++++++++++++++++----
+ 1 file changed, 19 insertions(+), 4 deletions(-)
+
+--- a/drivers/net/ethernet/cortina/gemini.c
++++ b/drivers/net/ethernet/cortina/gemini.c
+@@ -79,7 +79,8 @@ MODULE_PARM_DESC(debug, "Debug level (0=
+ #define GMAC0_IRQ4_8 (GMAC0_MIB_INT_BIT | GMAC0_RX_OVERRUN_INT_BIT)
+ 
+ #define GMAC_OFFLOAD_FEATURES (NETIF_F_SG | NETIF_F_IP_CSUM | \
+-			       NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM)
++			       NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM | \
++			       NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6)
+ 
+ /**
+  * struct gmac_queue_page - page buffer per-page info
+@@ -1148,13 +1149,25 @@ static int gmac_map_tx_bufs(struct net_d
+ 	skb_frag_t *skb_frag;
+ 	dma_addr_t mapping;
+ 	void *buffer;
++	u16 mss;
+ 	int ret;
+ 
+-	/* TODO: implement proper TSO using MTU in word3 */
+ 	word1 = skb->len;
+ 	word3 = SOF_BIT;
+ 
+-	if (skb->len >= ETH_FRAME_LEN) {
++	mss = skb_shinfo(skb)->gso_size;
++	if (mss) {
++		/* This means we are dealing with TCP and skb->len is the
++		 * sum total of all the segments. The TSO will deal with
++		 * chopping this up for us.
++		 */
++		/* The accelerator needs the full frame size here */
++		mss += skb_tcp_all_headers(skb);
++		netdev_dbg(netdev, "segment offloading mss = %04x len=%04x\n",
++			   mss, skb->len);
++		word1 |= TSS_MTU_ENABLE_BIT;
++		word3 |= mss;
++	} else if (skb->len >= ETH_FRAME_LEN) {
+ 		/* Hardware offloaded checksumming isn't working on frames
+ 		 * bigger than 1514 bytes. A hypothesis about this is that the
+ 		 * checksum buffer is only 1518 bytes, so when the frames get
+@@ -1169,7 +1182,9 @@ static int gmac_map_tx_bufs(struct net_d
+ 				return ret;
+ 		}
+ 		word1 |= TSS_BYPASS_BIT;
+-	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
++	}
++
++	if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ 		int tcp = 0;
+ 
+ 		/* We do not switch off the checksumming on non TCP/UDP
diff --git a/target/linux/gemini/patches-6.6/0005-net-ethernet-cortina-Use-TSO-also-on-common-TCP.patch b/target/linux/gemini/patches-6.6/0005-net-ethernet-cortina-Use-TSO-also-on-common-TCP.patch
new file mode 100644
index 0000000000..c690b8fddb
--- /dev/null
+++ b/target/linux/gemini/patches-6.6/0005-net-ethernet-cortina-Use-TSO-also-on-common-TCP.patch
@@ -0,0 +1,95 @@
+From 91fb8a7328dda827bc6c0da240a1eb17028416cd Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Thu, 9 May 2024 23:59:28 +0200
+Subject: [PATCH 2/5] net: ethernet: cortina: Use TSO also on common TCP
+
+It is possible to push the segment offloader to also
+process non-segmented frames: just pass the skb->len
+or desired MSS to the offloader and it will handle them.
+
+This is especially good if the user sets up the MTU
+and the frames get big, because the checksumming engine
+cannot handle any frames bigger than 1518 bytes, so
+segmenting them all to be at max that will be helpful
+for the hardware, which only need to quirk odd frames
+such as big UDP ping packets.
+
+The vendor driver always uses the TSO like this, and
+the driver seems more stable after this, so apparently
+the hardware may have been engineered to always use
+the TSO on anything it can handle.
+
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+---
+ drivers/net/ethernet/cortina/gemini.c | 31 +++++++++++++++++++++------
+ 1 file changed, 24 insertions(+), 7 deletions(-)
+
+--- a/drivers/net/ethernet/cortina/gemini.c
++++ b/drivers/net/ethernet/cortina/gemini.c
+@@ -1148,6 +1148,7 @@ static int gmac_map_tx_bufs(struct net_d
+ 	struct gmac_txdesc *txd;
+ 	skb_frag_t *skb_frag;
+ 	dma_addr_t mapping;
++	bool tcp = false;
+ 	void *buffer;
+ 	u16 mss;
+ 	int ret;
+@@ -1155,6 +1156,13 @@ static int gmac_map_tx_bufs(struct net_d
+ 	word1 = skb->len;
+ 	word3 = SOF_BIT;
+ 
++	/* Determine if we are doing TCP */
++	if (skb->protocol == htons(ETH_P_IP))
++		tcp = (ip_hdr(skb)->protocol == IPPROTO_TCP);
++	else
++		/* IPv6 */
++		tcp = (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP);
++
+ 	mss = skb_shinfo(skb)->gso_size;
+ 	if (mss) {
+ 		/* This means we are dealing with TCP and skb->len is the
+@@ -1167,6 +1175,20 @@ static int gmac_map_tx_bufs(struct net_d
+ 			   mss, skb->len);
+ 		word1 |= TSS_MTU_ENABLE_BIT;
+ 		word3 |= mss;
++	} else if (tcp) {
++		/* Even if we are not using TSO, use the segment offloader
++		 * for transferring the TCP frame: the TSO engine will deal
++		 * with chopping up frames that exceed ETH_DATA_LEN which
++		 * the checksumming engine cannot handle (see below) into
++		 * manageable chunks. It flawlessly deals with quite big
++		 * frames and frames containing custom DSA EtherTypes.
++		 */
++		mss = netdev->mtu + skb_tcp_all_headers(skb);
++		mss = min(mss, skb->len);
++		netdev_dbg(netdev, "botched TSO len %04x mtu %04x mss %04x\n",
++			   skb->len, netdev->mtu, mss);
++		word1 |= TSS_MTU_ENABLE_BIT;
++		word3 |= mss;
+ 	} else if (skb->len >= ETH_FRAME_LEN) {
+ 		/* Hardware offloaded checksumming isn't working on frames
+ 		 * bigger than 1514 bytes. A hypothesis about this is that the
+@@ -1185,21 +1207,16 @@ static int gmac_map_tx_bufs(struct net_d
+ 	}
+ 
+ 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
+-		int tcp = 0;
+-
+ 		/* We do not switch off the checksumming on non TCP/UDP
+ 		 * frames: as is shown from tests, the checksumming engine
+ 		 * is smart enough to see that a frame is not actually TCP
+ 		 * or UDP and then just pass it through without any changes
+ 		 * to the frame.
+ 		 */
+-		if (skb->protocol == htons(ETH_P_IP)) {
++		if (skb->protocol == htons(ETH_P_IP))
+ 			word1 |= TSS_IP_CHKSUM_BIT;
+-			tcp = ip_hdr(skb)->protocol == IPPROTO_TCP;
+-		} else { /* IPv6 */
++		else
+ 			word1 |= TSS_IPV6_ENABLE_BIT;
+-			tcp = ipv6_hdr(skb)->nexthdr == IPPROTO_TCP;
+-		}
+ 
+ 		word1 |= tcp ? TSS_TCP_CHKSUM_BIT : TSS_UDP_CHKSUM_BIT;
+ 	}
diff --git a/target/linux/gemini/patches-6.6/0006-net-ethernet-cortina-Rename-adjust-link-callback.patch b/target/linux/gemini/patches-6.6/0006-net-ethernet-cortina-Rename-adjust-link-callback.patch
new file mode 100644
index 0000000000..bbdef8fefc
--- /dev/null
+++ b/target/linux/gemini/patches-6.6/0006-net-ethernet-cortina-Rename-adjust-link-callback.patch
@@ -0,0 +1,36 @@
+From fa01c904b844e6033445f75b0b4d46a8e83b6086 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Fri, 10 May 2024 19:48:27 +0200
+Subject: [PATCH 3/5] net: ethernet: cortina: Rename adjust link callback
+
+The callback passed to of_phy_get_and_connect() in the
+Cortina Gemini driver is called "gmac_speed_set" which is
+archaic, rename it to "gmac_adjust_link" following the
+pattern of most other drivers.
+
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+---
+ drivers/net/ethernet/cortina/gemini.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/ethernet/cortina/gemini.c
++++ b/drivers/net/ethernet/cortina/gemini.c
+@@ -288,7 +288,7 @@ static void gmac_set_flow_control(struct
+ 	spin_unlock_irqrestore(&port->config_lock, flags);
+ }
+ 
+-static void gmac_speed_set(struct net_device *netdev)
++static void gmac_adjust_link(struct net_device *netdev)
+ {
+ 	struct gemini_ethernet_port *port = netdev_priv(netdev);
+ 	struct phy_device *phydev = netdev->phydev;
+@@ -367,7 +367,7 @@ static int gmac_setup_phy(struct net_dev
+ 
+ 	phy = of_phy_get_and_connect(netdev,
+ 				     dev->of_node,
+-				     gmac_speed_set);
++				     gmac_adjust_link);
+ 	if (!phy)
+ 		return -ENODEV;
+ 	netdev->phydev = phy;
diff --git a/target/linux/gemini/patches-6.6/0007-net-ethernet-cortina-Use-negotiated-TX-RX-pause.patch b/target/linux/gemini/patches-6.6/0007-net-ethernet-cortina-Use-negotiated-TX-RX-pause.patch
new file mode 100644
index 0000000000..a1b8707f72
--- /dev/null
+++ b/target/linux/gemini/patches-6.6/0007-net-ethernet-cortina-Use-negotiated-TX-RX-pause.patch
@@ -0,0 +1,46 @@
+From 50ac9765c674bac803719c6b8294670edc6df31d Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Fri, 10 May 2024 19:44:39 +0200
+Subject: [PATCH 4/5] net: ethernet: cortina: Use negotiated TX/RX pause
+
+Instead of directly poking into registers of the PHY, use
+the existing function to query phylib about this directly.
+
+Suggested-by: Andrew Lunn <andrew@lunn.ch>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+---
+ drivers/net/ethernet/cortina/gemini.c | 15 +++++----------
+ 1 file changed, 5 insertions(+), 10 deletions(-)
+
+--- a/drivers/net/ethernet/cortina/gemini.c
++++ b/drivers/net/ethernet/cortina/gemini.c
+@@ -293,8 +293,8 @@ static void gmac_adjust_link(struct net_
+ 	struct gemini_ethernet_port *port = netdev_priv(netdev);
+ 	struct phy_device *phydev = netdev->phydev;
+ 	union gmac_status status, old_status;
+-	int pause_tx = 0;
+-	int pause_rx = 0;
++	bool pause_tx = false;
++	bool pause_rx = false;
+ 
+ 	status.bits32 = readl(port->gmac_base + GMAC_STATUS);
+ 	old_status.bits32 = status.bits32;
+@@ -329,14 +329,9 @@ static void gmac_adjust_link(struct net_
+ 	}
+ 
+ 	if (phydev->duplex == DUPLEX_FULL) {
+-		u16 lcladv = phy_read(phydev, MII_ADVERTISE);
+-		u16 rmtadv = phy_read(phydev, MII_LPA);
+-		u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
+-
+-		if (cap & FLOW_CTRL_RX)
+-			pause_rx = 1;
+-		if (cap & FLOW_CTRL_TX)
+-			pause_tx = 1;
++		phy_get_pause(phydev, &pause_tx, &pause_rx);
++		netdev_dbg(netdev, "set negotiated pause params pause TX = %s, pause RX = %s\n",
++			   pause_tx ? "ON" : "OFF", pause_rx ? "ON" : "OFF");
+ 	}
+ 
+ 	gmac_set_flow_control(netdev, pause_tx, pause_rx);
diff --git a/target/linux/gemini/patches-6.6/0008-net-ethernet-cortina-Implement-.set_pauseparam.patch b/target/linux/gemini/patches-6.6/0008-net-ethernet-cortina-Implement-.set_pauseparam.patch
new file mode 100644
index 0000000000..ad7594e855
--- /dev/null
+++ b/target/linux/gemini/patches-6.6/0008-net-ethernet-cortina-Implement-.set_pauseparam.patch
@@ -0,0 +1,46 @@
+From 4eed4b87f17d10b7586349c13c3a30f9c24c9ba4 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Wed, 8 May 2024 23:21:17 +0200
+Subject: [PATCH 5/5] net: ethernet: cortina: Implement .set_pauseparam()
+
+The Cortina Gemini ethernet can very well set up TX or RX
+pausing, so add this functionality to the driver in a
+.set_pauseparam() callback. Essentially just call down to
+phylib and let phylib deal with this, .adjust_link()
+will respect the setting from phylib.
+
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+---
+ drivers/net/ethernet/cortina/gemini.c | 14 ++++++++++++++
+ 1 file changed, 14 insertions(+)
+
+--- a/drivers/net/ethernet/cortina/gemini.c
++++ b/drivers/net/ethernet/cortina/gemini.c
+@@ -2143,6 +2143,19 @@ static void gmac_get_pauseparam(struct n
+ 	pparam->autoneg = true;
+ }
+ 
++static int gmac_set_pauseparam(struct net_device *netdev,
++			       struct ethtool_pauseparam *pparam)
++{
++	struct phy_device *phydev = netdev->phydev;
++
++	if (!pparam->autoneg)
++		return -EOPNOTSUPP;
++
++	phy_set_asym_pause(phydev, pparam->rx_pause, pparam->tx_pause);
++
++	return 0;
++}
++
+ static void gmac_get_ringparam(struct net_device *netdev,
+ 			       struct ethtool_ringparam *rp,
+ 			       struct kernel_ethtool_ringparam *kernel_rp,
+@@ -2263,6 +2276,7 @@ static const struct ethtool_ops gmac_351
+ 	.set_link_ksettings = gmac_set_ksettings,
+ 	.nway_reset	= gmac_nway_reset,
+ 	.get_pauseparam	= gmac_get_pauseparam,
++	.set_pauseparam = gmac_set_pauseparam,
+ 	.get_ringparam	= gmac_get_ringparam,
+ 	.set_ringparam	= gmac_set_ringparam,
+ 	.get_coalesce	= gmac_get_coalesce,
diff --git a/target/linux/ixp4xx/Makefile b/target/linux/ixp4xx/Makefile
index f089687da9..33f7c579ea 100644
--- a/target/linux/ixp4xx/Makefile
+++ b/target/linux/ixp4xx/Makefile
@@ -11,7 +11,7 @@ FEATURES:=dt squashfs gpio
 CPU_TYPE:=xscale
 SUBTARGETS:=generic
 
-KERNEL_PATCHVER:=6.1
+KERNEL_PATCHVER:=6.6
 
 define Target/Description
 	Build firmware images for the IXP4xx XScale CPU
diff --git a/target/linux/ixp4xx/config-6.1 b/target/linux/ixp4xx/config-6.6
similarity index 90%
rename from target/linux/ixp4xx/config-6.1
rename to target/linux/ixp4xx/config-6.6
index 4c4aa11969..960012ada4 100644
--- a/target/linux/ixp4xx/config-6.1
+++ b/target/linux/ixp4xx/config-6.6
@@ -11,10 +11,10 @@ CONFIG_ARCH_MULTI_CPU_AUTO=y
 # CONFIG_ARCH_MULTI_V4T is not set
 CONFIG_ARCH_MULTI_V4_V5=y
 CONFIG_ARCH_MULTI_V5=y
-CONFIG_ARCH_NR_GPIO=0
 CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_STACKWALK=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ARM=y
 CONFIG_ARM_APPENDED_DTB=y
@@ -30,6 +30,7 @@ CONFIG_AUTO_ZRELADDR=y
 CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_MQ_PCI=y
+CONFIG_BUFFER_HEAD=y
 CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
 CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
 CONFIG_CC_NO_ARRAY_BOUNDS=y
@@ -45,6 +46,7 @@ CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_CP15=y
 CONFIG_CPU_CP15_MMU=y
 CONFIG_CPU_ENDIAN_BE32=y
+CONFIG_CPU_MITIGATIONS=y
 CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_THUMB_CAPABLE=y
 CONFIG_CPU_TLB_V4WBI=y
@@ -60,9 +62,9 @@ CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_HW=y
 CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
 CONFIG_CRYPTO_LIB_DES=m
+CONFIG_CRYPTO_LIB_GF128MUL=y
 CONFIG_CRYPTO_LIB_SHA1=y
 CONFIG_CRYPTO_LIB_UTILS=y
-CONFIG_CRYPTO_RNG2=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
@@ -82,10 +84,12 @@ CONFIG_FIX_EARLYCON_MEM=y
 CONFIG_FORCE_PCI=y
 CONFIG_FS_IOMAP=y
 CONFIG_FS_MBCACHE=y
+CONFIG_FUNCTION_ALIGNMENT=0
 CONFIG_FWNODE_MDIO=y
 CONFIG_FW_LOADER_PAGED_BUF=y
 CONFIG_FW_LOADER_SYSFS=y
-CONFIG_GCC11_NO_ARRAY_BOUNDS=y
+CONFIG_GCC10_NO_ARRAY_BOUNDS=y
+CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND=y
 CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_GENERIC_ATOMIC64=y
 CONFIG_GENERIC_BUG=y
@@ -108,13 +112,14 @@ CONFIG_GPIO_CDEV=y
 CONFIG_GPIO_GENERIC=y
 CONFIG_GPIO_GW_PLD=y
 CONFIG_GPIO_IXP4XX=y
+CONFIG_GRO_CELLS=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_HAS_DMA=y
 CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
 CONFIG_HAS_IOPORT_MAP=y
 CONFIG_HDLC=y
 CONFIG_HWMON=y
-CONFIG_HWMON_VID=y
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_IXP4XX=y
 CONFIG_HZ_FIXED=0
@@ -150,9 +155,9 @@ CONFIG_LOCK_DEBUGGING_SUPPORT=y
 CONFIG_MDIO_BUS=y
 CONFIG_MDIO_DEVICE=y
 CONFIG_MDIO_DEVRES=y
-CONFIG_MEMFD_CREATE=y
 CONFIG_MFD_SYSCON=y
 CONFIG_MIGRATION=y
+CONFIG_MMU_LAZY_TLB_REFCOUNT=y
 CONFIG_MODULES_USE_ELF_REL=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
 # CONFIG_MTD_CFI_GEOMETRY is not set
@@ -165,13 +170,20 @@ CONFIG_MTD_SPLIT_FIRMWARE_NAME="linux"
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_KUSER_HELPERS=y
 CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_DEVLINK=y
 CONFIG_NET_DSA=y
 CONFIG_NET_DSA_MV88E6060=y
+CONFIG_NET_DSA_TAG_TRAILER=y
+CONFIG_NET_EGRESS=y
+CONFIG_NET_INGRESS=y
 CONFIG_NET_PTP_CLASSIFY=y
 CONFIG_NET_SELFTESTS=y
+CONFIG_NET_SWITCHDEV=y
 CONFIG_NET_VENDOR_XSCALE=y
+CONFIG_NET_XGRESS=y
 CONFIG_NLS=y
 CONFIG_NVMEM=y
+CONFIG_NVMEM_LAYOUTS=y
 CONFIG_NVMEM_SYSFS=y
 CONFIG_OF=y
 CONFIG_OF_ADDRESS=y
@@ -181,12 +193,13 @@ CONFIG_OF_GPIO=y
 CONFIG_OF_IRQ=y
 CONFIG_OF_KOBJ=y
 CONFIG_OF_MDIO=y
-# CONFIG_OLD_SIGACTION is not set
-# CONFIG_OLD_SIGSUSPEND3 is not set
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
 CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PAGE_POOL=y
 CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
 CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
+CONFIG_PAHOLE_HAS_LANG_EXCLUDE=y
 CONFIG_PATA_IXP4XX_CF=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
@@ -195,6 +208,8 @@ CONFIG_PCI_IXP4XX=y
 CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PGTABLE_LEVELS=2
 CONFIG_PHYLIB=y
+CONFIG_PHYLIB_LEDS=y
+CONFIG_PHYLINK=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_PREEMPT_NONE_BUILD=y
@@ -203,22 +218,17 @@ CONFIG_RANDSTRUCT_NONE=y
 CONFIG_RATIONAL=y
 CONFIG_REALTEK_PHY=y
 CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
 CONFIG_REGMAP_MMIO=y
-CONFIG_RUST_IS_AVAILABLE=y
 CONFIG_SCSI=y
 CONFIG_SCSI_COMMON=y
-# CONFIG_SERIAL_8250_EXAR is not set
-# CONFIG_SERIAL_8250_FSL is not set
-# CONFIG_SERIAL_8250_PCI is not set
-# CONFIG_SERIAL_8250_PERICOM is not set
+CONFIG_SERIAL_8250_FSL=y
 CONFIG_SERIAL_MCTRL_GPIO=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SG_POOL=y
 CONFIG_SOFTIRQ_ON_OWN_STACK=y
 CONFIG_SPARSE_IRQ=y
 CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_SRCU=y
+CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
 CONFIG_SWPHY=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_THREAD_INFO_IN_TASK=y
diff --git a/target/linux/ixp4xx/image/Makefile b/target/linux/ixp4xx/image/Makefile
index c6d4817c96..b532bcd914 100644
--- a/target/linux/ixp4xx/image/Makefile
+++ b/target/linux/ixp4xx/image/Makefile
@@ -29,6 +29,7 @@ endef
 
 define Device/Default
 	PROFILES := Default
+	DEVICE_DTS_DIR = $$(DTS_DIR)/intel/ixp
 	KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
 	KERNEL_NAME := zImage
 	KERNEL := kernel-bin | append-dtb
diff --git a/target/linux/ixp4xx/patches-6.1/0002-gpio-ixp4xx-Handle-clock-output-on-pin-14-and-15.patch b/target/linux/ixp4xx/patches-6.6/0001-gpio-ixp4xx-Handle-clock-output-on-pin-14-and-15.patch
similarity index 96%
rename from target/linux/ixp4xx/patches-6.1/0002-gpio-ixp4xx-Handle-clock-output-on-pin-14-and-15.patch
rename to target/linux/ixp4xx/patches-6.6/0001-gpio-ixp4xx-Handle-clock-output-on-pin-14-and-15.patch
index 38adecd64f..0498edcd1b 100644
--- a/target/linux/ixp4xx/patches-6.1/0002-gpio-ixp4xx-Handle-clock-output-on-pin-14-and-15.patch
+++ b/target/linux/ixp4xx/patches-6.6/0001-gpio-ixp4xx-Handle-clock-output-on-pin-14-and-15.patch
@@ -40,7 +40,7 @@ Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
  /**
   * struct ixp4xx_gpio - IXP4 GPIO state container
   * @dev: containing device for this instance
-@@ -203,6 +215,8 @@ static int ixp4xx_gpio_probe(struct plat
+@@ -202,6 +214,8 @@ static int ixp4xx_gpio_probe(struct plat
  	struct ixp4xx_gpio *g;
  	struct gpio_irq_chip *girq;
  	struct device_node *irq_parent;
@@ -49,7 +49,7 @@ Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
  	int ret;
  
  	g = devm_kzalloc(dev, sizeof(*g), GFP_KERNEL);
-@@ -233,7 +247,40 @@ static int ixp4xx_gpio_probe(struct plat
+@@ -231,7 +245,40 @@ static int ixp4xx_gpio_probe(struct plat
  	 */
  	if (of_machine_is_compatible("dlink,dsm-g600-a") ||
  	    of_machine_is_compatible("iom,nas-100d"))
diff --git a/target/linux/ixp4xx/patches-6.1/0005-net-ixp4xx_eth-Support-changing-the-MTU.patch b/target/linux/ixp4xx/patches-6.6/0002-net-ixp4xx_eth-Support-changing-the-MTU.patch
similarity index 100%
rename from target/linux/ixp4xx/patches-6.1/0005-net-ixp4xx_eth-Support-changing-the-MTU.patch
rename to target/linux/ixp4xx/patches-6.6/0002-net-ixp4xx_eth-Support-changing-the-MTU.patch
diff --git a/target/linux/ixp4xx/patches-6.1/0004-ARM-dts-ixp4xx-Add-USRobotics-USR8200-device-tree.patch b/target/linux/ixp4xx/patches-6.6/0003-ARM-dts-ixp4xx-Add-USRobotics-USR8200-device-tree.patch
similarity index 89%
rename from target/linux/ixp4xx/patches-6.1/0004-ARM-dts-ixp4xx-Add-USRobotics-USR8200-device-tree.patch
rename to target/linux/ixp4xx/patches-6.6/0003-ARM-dts-ixp4xx-Add-USRobotics-USR8200-device-tree.patch
index 0ae80d170e..93b12a5381 100644
--- a/target/linux/ixp4xx/patches-6.1/0004-ARM-dts-ixp4xx-Add-USRobotics-USR8200-device-tree.patch
+++ b/target/linux/ixp4xx/patches-6.6/0003-ARM-dts-ixp4xx-Add-USRobotics-USR8200-device-tree.patch
@@ -1,33 +1,33 @@
-From 02693ffdb93bffcbe772bd91a399dabd123b8c19 Mon Sep 17 00:00:00 2001
+From a1490c1e8a12a8286c6a34c3d277a519066fc51e Mon Sep 17 00:00:00 2001
 From: Linus Walleij <linus.walleij@linaro.org>
-Date: Tue, 19 Sep 2023 16:02:15 +0200
-Subject: [PATCH 4/4] ARM: dts: ixp4xx: Add USRobotics USR8200 device tree
+Date: Sat, 7 Oct 2023 14:32:40 +0200
+Subject: [PATCH] ARM: dts: ixp4xx: Add USRobotics USR8200 device tree
 
 This is a USRobotics NAS/Firewall/router that has been supported
 by OpenWrt in the past. It had dedicated users so let's get it
 properly supported.
 
+Some debugging and fixing was provided by Howard Harte.
+
+Link: https://lore.kernel.org/r/20231007-ixp4xx-usr8200-v1-1-aded3d6ff6f1@linaro.org
 Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
 ---
- arch/arm/boot/dts/Makefile                    |   3 +-
- .../dts/intel-ixp42x-usrobotics-usr8200.dts   | 229 ++++++++++++++++++
+ arch/arm/boot/dts/intel/ixp/Makefile          |   3 +-
+ .../ixp/intel-ixp42x-usrobotics-usr8200.dts   | 229 ++++++++++++++++++
  2 files changed, 231 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/intel-ixp42x-usrobotics-usr8200.dts
+ create mode 100644 arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
 
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -292,7 +292,8 @@ dtb-$(CONFIG_ARCH_IXP4XX) += \
+--- a/arch/arm/boot/dts/intel/ixp/Makefile
++++ b/arch/arm/boot/dts/intel/ixp/Makefile
+@@ -16,4 +16,5 @@ dtb-$(CONFIG_ARCH_IXP4XX) += \
  	intel-ixp43x-gateworks-gw2358.dtb \
  	intel-ixp42x-netgear-wg302v1.dtb \
  	intel-ixp42x-arcom-vulcan.dtb \
 -	intel-ixp42x-gateway-7001.dtb
 +	intel-ixp42x-gateway-7001.dtb \
 +	intel-ixp42x-usrobotics-usr8200.dtb
- dtb-$(CONFIG_ARCH_KEYSTONE) += \
- 	keystone-k2hk-evm.dtb \
- 	keystone-k2l-evm.dtb \
 --- /dev/null
-+++ b/arch/arm/boot/dts/intel-ixp42x-usrobotics-usr8200.dts
++++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
 @@ -0,0 +1,229 @@
 +// SPDX-License-Identifier: ISC
 +/*
diff --git a/target/linux/ixp4xx/patches-6.1/0008-ARM-dts-usr8200-Fix-phy-registers.patch b/target/linux/ixp4xx/patches-6.6/0004-ARM-dts-usr8200-Fix-phy-registers.patch
similarity index 74%
rename from target/linux/ixp4xx/patches-6.1/0008-ARM-dts-usr8200-Fix-phy-registers.patch
rename to target/linux/ixp4xx/patches-6.6/0004-ARM-dts-usr8200-Fix-phy-registers.patch
index bf056b89a9..93458bc2e8 100644
--- a/target/linux/ixp4xx/patches-6.1/0008-ARM-dts-usr8200-Fix-phy-registers.patch
+++ b/target/linux/ixp4xx/patches-6.6/0004-ARM-dts-usr8200-Fix-phy-registers.patch
@@ -1,6 +1,6 @@
-From a1ab45966e5a21841af58742adf27725e523d303 Mon Sep 17 00:00:00 2001
+From 98f3b5f44b9ae86c4a80185b57149867472a2570 Mon Sep 17 00:00:00 2001
 From: Linus Walleij <linus.walleij@linaro.org>
-Date: Sat, 14 Oct 2023 19:53:24 +0200
+Date: Fri, 20 Oct 2023 15:11:41 +0200
 Subject: [PATCH] ARM: dts: usr8200: Fix phy registers
 
 The MV88E6060 switch has internal PHY registers at MDIO
@@ -8,12 +8,14 @@ addresses 0x00..0x04. Tie each port to the corresponding
 PHY.
 
 Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Link: https://lore.kernel.org/r/20231020-ixp4xx-usr8200-dtsfix-v1-1-3a8591dea259@linaro.org
+Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 ---
- .../dts/intel-ixp42x-usrobotics-usr8200.dts   | 22 +++++++++++++++++++
+ .../ixp/intel-ixp42x-usrobotics-usr8200.dts   | 22 +++++++++++++++++++
  1 file changed, 22 insertions(+)
 
---- a/arch/arm/boot/dts/intel-ixp42x-usrobotics-usr8200.dts
-+++ b/arch/arm/boot/dts/intel-ixp42x-usrobotics-usr8200.dts
+--- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
++++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
 @@ -165,6 +165,24 @@
  				#address-cells = <1>;
  				#size-cells = <0>;
diff --git a/target/linux/ixp4xx/patches-6.6/0005-ARM-dts-ixp4xx-nslu2-Enable-write-on-flash.patch b/target/linux/ixp4xx/patches-6.6/0005-ARM-dts-ixp4xx-nslu2-Enable-write-on-flash.patch
new file mode 100644
index 0000000000..ccbd7ea77d
--- /dev/null
+++ b/target/linux/ixp4xx/patches-6.6/0005-ARM-dts-ixp4xx-nslu2-Enable-write-on-flash.patch
@@ -0,0 +1,25 @@
+From 89eccb6726d93c9c78997e91bd641b0e46bc3c5f Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Fri, 8 Sep 2023 12:49:48 +0200
+Subject: [PATCH] ARM: dts: ixp4xx-nslu2: Enable write on flash
+
+To upgrade the firmware and similar, the flash needs write
+access.
+
+Link: https://lore.kernel.org/r/20230908-ixp4xx-dts-v1-1-98d36264ed6d@linaro.org
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+---
+ arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts
++++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts
+@@ -101,6 +101,8 @@
+ 			flash@0,0 {
+ 				compatible = "intel,ixp4xx-flash", "cfi-flash";
+ 				bank-width = <2>;
++				/* Enable writes on the expansion bus */
++				intel,ixp4xx-eb-write-enable = <1>;
+ 				/*
+ 				 * 8 MB of Flash in 0x20000 byte blocks
+ 				 * mapped in at CS0.
diff --git a/target/linux/ixp4xx/patches-6.6/0006-ARM-dts-ixp4xx-Use-right-restart-keycode.patch b/target/linux/ixp4xx/patches-6.6/0006-ARM-dts-ixp4xx-Use-right-restart-keycode.patch
new file mode 100644
index 0000000000..648c6efe2b
--- /dev/null
+++ b/target/linux/ixp4xx/patches-6.6/0006-ARM-dts-ixp4xx-Use-right-restart-keycode.patch
@@ -0,0 +1,62 @@
+From deb93908958e74dffbef1ce6a1cc2f82ac4f96ed Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Fri, 8 Sep 2023 12:49:49 +0200
+Subject: [PATCH] ARM: dts: ixp4xx: Use right restart keycode
+
+The "reset" key on a few IXP4xx routers were sending KEY_ESC
+but what we want to send is KEY_RESTART which will make
+OpenWrt and similar userspace do a controlled reboot.
+
+Link: https://lore.kernel.org/r/20230908-ixp4xx-dts-v1-2-98d36264ed6d@linaro.org
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+---
+ arch/arm/boot/dts/intel/ixp/intel-ixp42x-dlink-dsm-g600.dts | 2 +-
+ arch/arm/boot/dts/intel/ixp/intel-ixp42x-freecom-fsg-3.dts  | 2 +-
+ arch/arm/boot/dts/intel/ixp/intel-ixp42x-iomega-nas100d.dts | 2 +-
+ arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts  | 2 +-
+ 4 files changed, 4 insertions(+), 4 deletions(-)
+
+--- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-dlink-dsm-g600.dts
++++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-dlink-dsm-g600.dts
+@@ -57,7 +57,7 @@
+ 
+ 		button-reset {
+ 			wakeup-source;
+-			linux,code = <KEY_ESC>;
++			linux,code = <KEY_RESTART>;
+ 			label = "reset";
+ 			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ 		};
+--- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-freecom-fsg-3.dts
++++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-freecom-fsg-3.dts
+@@ -44,7 +44,7 @@
+ 		};
+ 		button-reset {
+ 			wakeup-source;
+-			linux,code = <KEY_ESC>;
++			linux,code = <KEY_RESTART>;
+ 			label = "reset";
+ 			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ 		};
+--- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-iomega-nas100d.dts
++++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-iomega-nas100d.dts
+@@ -63,7 +63,7 @@
+ 		};
+ 		button-reset {
+ 			wakeup-source;
+-			linux,code = <KEY_ESC>;
++			linux,code = <KEY_RESTART>;
+ 			label = "reset";
+ 			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ 		};
+--- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts
++++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts
+@@ -65,7 +65,7 @@
+ 		};
+ 		button-reset {
+ 			wakeup-source;
+-			linux,code = <KEY_ESC>;
++			linux,code = <KEY_RESTART>;
+ 			label = "reset";
+ 			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ 		};
diff --git a/target/linux/ixp4xx/patches-6.1/301-ARM-dts-ixp4xx-Boot-NSLU2-from-harddrive.patch b/target/linux/ixp4xx/patches-6.6/301-ARM-dts-ixp4xx-Boot-NSLU2-from-harddrive.patch
similarity index 69%
rename from target/linux/ixp4xx/patches-6.1/301-ARM-dts-ixp4xx-Boot-NSLU2-from-harddrive.patch
rename to target/linux/ixp4xx/patches-6.6/301-ARM-dts-ixp4xx-Boot-NSLU2-from-harddrive.patch
index ffd69a774c..2a82ec0a2d 100644
--- a/target/linux/ixp4xx/patches-6.1/301-ARM-dts-ixp4xx-Boot-NSLU2-from-harddrive.patch
+++ b/target/linux/ixp4xx/patches-6.6/301-ARM-dts-ixp4xx-Boot-NSLU2-from-harddrive.patch
@@ -1,4 +1,4 @@
-From 2792791a19f90b0141ed2e781599ba0a42a8cfd5 Mon Sep 17 00:00:00 2001
+From 6484f966af53447deefcd4b805c201d8624981cb Mon Sep 17 00:00:00 2001
 From: Linus Walleij <linus.walleij@linaro.org>
 Date: Mon, 29 May 2023 23:32:44 +0200
 Subject: [PATCH] ARM: dts: ixp4xx: Boot NSLU2 from harddrive
@@ -8,11 +8,11 @@ to hold any rootfs these days.
 
 Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
 ---
- arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts | 2 +-
+ arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
 
---- a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
-+++ b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
+--- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts
++++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts
 @@ -21,7 +21,7 @@
  	};
  
diff --git a/target/linux/mediatek/dts/mt7981b-openwrt-one.dts b/target/linux/mediatek/dts/mt7981b-openwrt-one.dts
new file mode 100644
index 0000000000..b2223f8d76
--- /dev/null
+++ b/target/linux/mediatek/dts/mt7981b-openwrt-one.dts
@@ -0,0 +1,457 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+#include "mt7981.dtsi"
+
+/ {
+	model = "OpenWrt One";
+	compatible = "openwrt,one", "mediatek,mt7981";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		serial0 = &uart0;
+		led-boot = &led_status_white;
+		led-failsafe = &led_status_red;
+		led-running = &led_status_green;
+		led-upgrade = &led_status_green;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		rootdisk = <&ubi_fit_volume>;
+	};
+
+	memory {
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user {
+			label = "user";
+			linux,code = <BTN_0>;
+			gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		led_status_white: led-0 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_STATUS;
+			pwms = <&pwm 0 10000>;
+			linux,default-trigger = "pattern";
+			led-pattern = <0 500 25 500>;
+		};
+
+		led_status_green: led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			pwms = <&pwm 1 10000>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led_status_red: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&pio 34 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 35 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-export {
+		compatible = "gpio-export";
+
+		 gpio-0 {
+			gpio-export,name = "mikrobus-reset";
+			gpio-export,output = <1>;
+			gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		gpio-1 {
+			gpio-export,name = "watchdog-enable";
+			gpio-export,output = <1>;
+			gpios = <&pio 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		gpio-2 {
+			gpio-export,name = "usb-enable";
+			gpio-export,output = <1>;
+			gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-watchdog {
+		compatible = "linux,wdt-gpio";
+		gpios = <&pio 8 GPIO_ACTIVE_LOW>;
+		hw_algo = "toggle";
+		hw_margin_ms = <25000>;
+		always-running;
+	};
+};
+
+&eth {
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-handle = <&phy15>;
+		phy-mode = "2500base-x";
+		nvmem-cell-names = "mac-address";
+		nvmem-cells = <&macaddr_factory_4>;
+	};
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "gmii";
+		phy-handle = <&int_gbe_phy>;
+		nvmem-cell-names = "mac-address";
+		nvmem-cells = <&macaddr_factory_a>;
+	};
+};
+
+&mdio_bus {
+	phy15: phy@f {
+		reg = <0xf>;
+
+		airoha,pnswap-rx;
+
+		interrupt-parent = <&pio>;
+		interrupts = <38 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <20000>;
+
+		phy-mode = "2500base-x";
+		full-duplex;
+		pause;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				function = LED_FUNCTION_WAN;
+				color = <LED_COLOR_ID_AMBER>;
+			};
+
+			led@1 {
+				reg = <1>;
+				function = LED_FUNCTION_WAN;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+		};
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&pio {
+	spi0_flash_pins: spi0-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+
+		conf-pu {
+			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
+		};
+
+		conf-pd {
+			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
+		};
+	};
+
+	spi1_flash_pins: spi1-pins {
+		mux {
+			function = "spi";
+			groups = "spi1_1";
+		};
+
+		conf-pu {
+			pins = "SPI1_CS";
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
+		};
+
+		conf-pd {
+			pins = "SPI1_CLK", "SPI1_MOSI", "SPI1_MISO";
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
+		};
+	};
+
+	spi2_flash_pins: spi2-pins {
+		mux {
+			function = "spi";
+			groups = "spi2";
+		};
+
+		conf-pu {
+			pins = "SPI2_CS", "SPI2_WP";
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
+		};
+
+		conf-pd {
+			pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
+		};
+	};
+
+	i2c_pins: i2c-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c0_0";
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		mux {
+			function = "uart";
+			groups = "uart2_0_tx_rx";
+		};
+	};
+
+	pwm_pins: pwm-pins {
+		mux {
+			function = "pwm";
+			groups = "pwm0_0", "pwm1_1";
+		};
+	};
+
+	pcie_pins: pcie-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie_pereset";
+		};
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_flash_pins>;
+	cs-gpios = <0>, <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-nand";
+		reg = <1>;
+		spi-max-frequency = <52000000>;
+
+		spi-cal-enable;
+		spi-cal-mode = "read-data";
+		spi-cal-datalen = <7>;
+		spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>;
+		spi-cal-addrlen = <5>;
+		spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bl2";
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			partition@580000 {
+				label = "ubi";
+				reg = <0x100000 0x7F00000>;
+				compatible = "linux,ubi";
+
+				volumes {
+					ubi_fit_volume: ubi-volume-fit {
+						volname = "fit";
+					};
+				};
+			};
+		};
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_flash_pins>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_flash_pins>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		spi-max-frequency = <52000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bl2-nor";
+				reg = <0x00000 0x40000>;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0xc0000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x1000>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						compatible = "mac-base";
+						reg = <0x24 0x6>;
+						#nvmem-cell-cells = <1>;
+					};
+
+					macaddr_factory_a: macaddr@a {
+						compatible = "mac-base";
+						reg = <0x2a 0x6>;
+						#nvmem-cell-cells = <1>;
+					};
+				};
+			};
+
+			partition@100000 {
+				label = "fip-nor";
+				reg = <0x100000 0x80000>;
+			};
+
+			partition@180000 {
+				label = "recovery";
+				reg = <0x180000 0xc80000>;
+			};
+		};
+	};
+};
+
+&xhci {
+	phys = <&u2port0 PHY_TYPE_USB2>;
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	mediatek,u3p-dis-msk = <0x01>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&wifi {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins>;
+	status = "okay";
+};
+
+&sgmiisys0 {
+	/delete-node/ mediatek,pnswap;
+};
diff --git a/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7981.dtsi b/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7981.dtsi
index 54cfd0b4b9..012c6e4e5b 100644
--- a/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7981.dtsi
+++ b/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7981.dtsi
@@ -416,7 +416,7 @@
 
 		pcie: pcie@11280000 {
 			compatible = "mediatek,mt7981-pcie",
-				     "mediatek,mt7986-pcie";
+				     "mediatek,mt8192-pcie";
 			reg = <0 0x11280000 0 0x4000>;
 			reg-names = "pcie-mac";
 			ranges = <0x82000000 0 0x20000000
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
index a886007b61..c4c352de7a 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
@@ -76,6 +76,12 @@ openembed,som7981)
 	ucidef_set_led_netdev "lanact" "LANACT" "green:lan" "eth1" "rx tx"
 	ucidef_set_led_netdev "lanlink" "LANLINK" "amber:lan" "eth1" "link"
 	;;
+openwrt,one)
+	ucidef_set_led_netdev "wanact" "WANACT" "mdio-bus:0f:green:wan" "eth0" "rx tx"
+	ucidef_set_led_netdev "wanlink" "WANLINK" "mdio-bus:0f:amber:wan" "eth0" "link"
+	ucidef_set_led_netdev "lanact" "LANACT" "green:lan" "eth1" "rx tx"
+	ucidef_set_led_netdev "lanlink" "LANLINK" "amber:lan" "eth1" "link"
+	;;
 routerich,ax3000)
 	ucidef_set_led_netdev "lan-1" "lan-1" "blue:lan-1" "lan1" "link tx rx"
 	ucidef_set_led_netdev "lan-2" "lan-2" "blue:lan-2" "lan2" "link tx rx"
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
index 4488e37a7c..bbaa0d1e14 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
@@ -69,7 +69,8 @@ mediatek_setup_interfaces()
 	glinet,gl-mt3000|\
 	glinet,gl-x3000|\
 	glinet,gl-xe3000|\
-	openembed,som7981)
+	openembed,som7981|\
+	openwrt,one)
 		ucidef_set_interfaces_lan_wan eth1 eth0
 		;;
 	dlink,aquila-pro-ai-m30-a1)
diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata
index bd68ef7415..27a16e0fb7 100644
--- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata
+++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata
@@ -31,6 +31,9 @@ case "$FIRMWARE" in
 			;;
 		esac
 		;;
+	openwrt,one)
+		caldata_extract "factory" 0x0 0x1000
+		;;
 	ubnt,unifi-6-plus)
 		caldata_extract_mmc "factory" 0x0 0x1000
 		;;
diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
index 72279d2940..dc073643ee 100755
--- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
@@ -85,7 +85,8 @@ platform_do_upgrade() {
 	bananapi,bpi-r4|\
 	bananapi,bpi-r4-poe|\
 	jdcloud,re-cp-03|\
-	mediatek,mt7988a-rfb)
+	mediatek,mt7988a-rfb|\
+	openwrt,one)
 		[ -e /dev/fit0 ] && fitblk /dev/fit0
 		[ -e /dev/fitrw ] && fitblk /dev/fitrw
 		bootdev="$(fitblk_get_bootdev)"
diff --git a/target/linux/mediatek/filogic/config-6.6 b/target/linux/mediatek/filogic/config-6.6
index 110f6e7550..5f4e42ac0f 100644
--- a/target/linux/mediatek/filogic/config-6.6
+++ b/target/linux/mediatek/filogic/config-6.6
@@ -228,6 +228,7 @@ CONFIG_IRQ_TIME_ACCOUNTING=y
 CONFIG_IRQ_WORK=y
 CONFIG_JBD2=y
 CONFIG_JUMP_LABEL=y
+CONFIG_LEDS_PWM=y
 CONFIG_LEDS_SMARTRG_LED=y
 CONFIG_LIBFDT=y
 CONFIG_LOCK_DEBUGGING_SUPPORT=y
diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk
index bcb727535b..303be28a06 100644
--- a/target/linux/mediatek/image/filogic.mk
+++ b/target/linux/mediatek/image/filogic.mk
@@ -1134,6 +1134,54 @@ define Device/openembed_som7981
 endef
 TARGET_DEVICES += openembed_som7981
 
+define Build/append-openwrt-one-eeprom
+        dd if=$(STAGING_DIR_IMAGE)/mt7981_eeprom_mt7976_dbdc.bin >> $@
+endef
+
+define Device/openwrt_one
+  DEVICE_VENDOR := OpenWrt
+  DEVICE_MODEL := One
+  DEVICE_DTS := mt7981b-openwrt-one
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_DTC_FLAGS := --pad 4096
+  DEVICE_DTS_LOADADDR := 0x43f00000
+  DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-rtc-pcf8563 kmod-usb3 kmod-nvme kmod-phy-airoha-en8811h
+  KERNEL_LOADADDR := 0x44000000
+  KERNEL := kernel-bin | gzip
+  KERNEL_INITRAMFS := kernel-bin | lzma | \
+	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+  KERNEL_INITRAMFS_SUFFIX := .itb
+  KERNEL_IN_UBI := 1
+  UBOOTENV_IN_UBI := 1
+  IMAGES := sysupgrade.itb
+  IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
+  IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
+  ARTIFACTS := \
+	nor-preloader.bin nor-bl31-uboot.fip \
+	snand-preloader.bin snand-bl31-uboot.fip \
+	factory.ubi snand-factory.bin nor-factory.bin
+  ARTIFACT/nor-preloader.bin		:= mt7981-bl2 nor-ddr4
+  ARTIFACT/nor-bl31-uboot.fip		:= mt7981-bl31-uboot openwrt_one-nor
+  ARTIFACT/snand-preloader.bin		:= mt7981-bl2 spim-nand-ubi-ddr4
+  ARTIFACT/snand-bl31-uboot.fip		:= mt7981-bl31-uboot openwrt_one-snand
+  ARTIFACT/factory.ubi			:= ubinize-image fit squashfs-sysupgrade.itb
+  ARTIFACT/snand-factory.bin		:= mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 256k | \
+					   mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 512k | \
+					   mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 768k | \
+					   mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 1024k | \
+					   ubinize-image fit squashfs-sysupgrade.itb
+  ARTIFACT/nor-factory.bin		:= mt7981-bl2 nor-ddr4 | pad-to 256k | \
+					   append-openwrt-one-eeprom | pad-to 1024k | \
+					   mt7981-bl31-uboot openwrt_one-nor | pad-to 512k | \
+					   append-image-stage initramfs.itb
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  UBINIZE_PARTS := fip=:$(STAGING_DIR_IMAGE)/mt7981_openwrt_one-snand-u-boot.fip recovery=:$(KDIR)/tmp/openwrt-mediatek-filogic-openwrt_one-initramfs.itb \
+		   $(if $(wildcard $(TOPDIR)/openwrt-mediatek-filogic-openwrt_one-calibration.itb), calibration=:$(TOPDIR)/openwrt-mediatek-filogic-openwrt_one-calibration.itb)
+endef
+TARGET_DEVICES += openwrt_one
+
 define Device/qihoo_360t7
   DEVICE_VENDOR := Qihoo
   DEVICE_MODEL := 360T7