x86/64: Add support for AMD SOC Ethernet controller

This feature is already supported in kernel. Add definition
and configuration in Makefile of OpenWRT.
It is tested on board Dibbler with processor V1605B.
Dmesg is as below.
--------------------------------------------
[    0.317122] smpboot: CPU0: AMD Ryzen Embedded V1605B with Radeon
Vega Gfx (family: 0x17, model: 0x11, stepping: 0x0)

[    8.227270] libphy: amd-xgbe-mii: probed
[    8.228189] amd-xgbe 0000:02:00.1 eth0: net device enabled
[    8.228999] libphy: amd-xgbe-mii: probed
[    8.229921] amd-xgbe 0000:02:00.2 eth1: net device enabled
.....
[   11.760869] br-lan: port 1(eth0) entered blocking state
[   11.761365] br-lan: port 1(eth0) entered disabled state
[   11.762019] device eth0 entered promiscuous mode
[   11.785285] 8021q: adding VLAN 0 to HW filter on device eth1
[   16.881431] amd-xgbe 0000:02:00.1 eth0: Link is Up - 1Gbps/Full -
flow control off
[   16.882108] br-lan: port 1(eth0) entered blocking state
[   16.882583] br-lan: port 1(eth0) entered forwarding state
[   16.883249] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
-----------------------------------------------

Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
This commit is contained in:
Zheng Bao 2021-04-13 12:46:17 +08:00 committed by AmadeusGhost
parent 829f41c458
commit b57c060efb

View File

@ -19,6 +19,22 @@ endef
$(eval $(call KernelPackage,amazon-ena))
define KernelPackage/amd-xgbe
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=AMD Ethernet on SoC support
DEPENDS:=@PCI_SUPPORT @TARGET_x86_64 +kmod-lib-crc32c +kmod-ptp +kmod-libphy
KCONFIG:=CONFIG_AMD_XGBE
FILES:=$(LINUX_DIR)/drivers/net/ethernet/amd/xgbe/amd-xgbe.ko
AUTOLOAD:=$(call AutoLoad,35,amd-xgbe)
endef
define KernelPackage/amd-xgbe/description
Kernel modules for AMD 10GbE Ethernet device on an AMD SoC.
endef
$(eval $(call KernelPackage,amd-xgbe))
define KernelPackage/sound-cs5535audio
TITLE:=CS5535/CS5536 Audio Controller
DEPENDS:=@TARGET_x86_geode +kmod-ac97