Merge Official Source

package/base-files/Makefile

@@ -12,7 +12,7 @@ include $(INCLUDE_DIR)/version.mk
 include $(INCLUDE_DIR)/feeds.mk
 
 PKG_NAME:=base-files
-PKG_RELEASE:=221
+PKG_RELEASE:=222
 PKG_FLAGS:=nonshared
 
 PKG_FILE_DEPENDS:=$(PLATFORM_DIR)/ $(GENERIC_PLATFORM_DIR)/base-files/

package/base-files/files/lib/functions/caldata.sh

@@ -64,7 +64,8 @@ caldata_from_file() {
 
 	[ -n "$target" ] || target=/lib/firmware/$FIRMWARE
 
-	dd if=$source of=$target iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
+	# dd doesn't handle partial reads from special files: use cat
+	cat $source | dd of=$target iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
 		caldata_die "failed to extract calibration data from $source"
 }
 
@@ -73,13 +74,14 @@ caldata_sysfsload_from_file() {
 	local offset=$(($2))
 	local count=$(($3))
 
+	# dd doesn't handle partial reads from special files: use cat
 	# test extract to /dev/null first
-	dd if=$source of=/dev/null iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
+	cat $source | dd of=/dev/null iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
 		caldata_die "failed to extract calibration data from $source"
 
 	# can't fail now
 	echo 1 > /sys/$DEVPATH/loading
-	dd if=$source of=/sys/$DEVPATH/data iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null
+	cat $source | dd of=/sys/$DEVPATH/data iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null
 	echo 0 > /sys/$DEVPATH/loading
 }
 

package/boot/rbcfg/Makefile

@@ -1,47 +0,0 @@
-#
-# Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=rbcfg
-PKG_RELEASE:=3
-
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-
-PKG_FLAGS:=nonshared
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/rbcfg
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=Boot Loaders
-  TITLE:=RouterBOOT configuration tool
-  DEPENDS:=@(TARGET_ar71xx||TARGET_ath79)
-endef
-
-define Package/rbcfg/description
- This package contains an utility to manipulate RouterBOOT configuration on the
- MikroTIK RB-4XX devices.
-endef
-
-define Build/Configure
-endef
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR) \
-		CC="$(TARGET_CC)" \
-		CFLAGS="$(TARGET_CFLAGS) -Wall" \
-		LDFLAGS="$(TARGET_LDFLAGS)"
-endef
-
-define Package/rbcfg/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/rbcfg $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,rbcfg))

package/boot/rbcfg/src/Makefile

@@ -1,14 +0,0 @@
-CC = gcc
-CFLAGS = -Wall
-OBJS = main.o cyg_crc32.o
-
-all: rbcfg
-
-%.o: %.c
-	$(CC) $(CFLAGS) -c -o $@ $<
-
-rbcfg: $(OBJS)
-	$(CC) -o $@ $(OBJS)
-
-clean:
-	rm -f rbcfg *.o

package/boot/rbcfg/src/cyg_crc.h

@@ -1,109 +0,0 @@
-//==========================================================================
-//
-//      crc.h
-//
-//      Interface for the CRC algorithms.
-//
-//==========================================================================
-//####ECOSGPLCOPYRIGHTBEGIN####
-// -------------------------------------------
-// This file is part of eCos, the Embedded Configurable Operating System.
-// Copyright (C) 2002 Andrew Lunn
-//
-// eCos is free software; you can redistribute it and/or modify it under
-// the terms of the GNU General Public License as published by the Free
-// Software Foundation; either version 2 or (at your option) any later version.
-//
-// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
-// WARRANTY; without even the implied warranty of MERCHANTABILITY or
-// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-// for more details.
-//
-// You should have received a copy of the GNU General Public License along
-// with eCos; if not, write to the Free Software Foundation, Inc.,
-// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-//
-// As a special exception, if other files instantiate templates or use macros
-// or inline functions from this file, or you compile this file and link it
-// with other works to produce a work based on this file, this file does not
-// by itself cause the resulting work to be covered by the GNU General Public
-// License. However the source code for this file must still be made available
-// in accordance with section (3) of the GNU General Public License.
-//
-// This exception does not invalidate any other reasons why a work based on
-// this file might be covered by the GNU General Public License.
-//
-// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
-// at http://sources.redhat.com/ecos/ecos-license/
-// -------------------------------------------
-//####ECOSGPLCOPYRIGHTEND####
-//==========================================================================
-//#####DESCRIPTIONBEGIN####
-//
-// Author(s):    Andrew Lunn
-// Contributors: Andrew Lunn
-// Date:         2002-08-06
-// Purpose:
-// Description:
-//
-// This code is part of eCos (tm).
-//
-//####DESCRIPTIONEND####
-//
-//==========================================================================
-
-#ifndef _SERVICES_CRC_CRC_H_
-#define _SERVICES_CRC_CRC_H_
-
-#if 0
-#include <cyg/infra/cyg_type.h>
-#else
-#include <stdint.h>
-typedef uint32_t cyg_uint32;
-typedef uint16_t cyg_uint16;
-#endif
-
-#ifndef __externC
-# ifdef __cplusplus
-#  define __externC extern "C"
-# else
-#  define __externC extern
-# endif
-#endif
-
-// Compute a CRC, using the POSIX 1003 definition
-
-__externC cyg_uint32
-cyg_posix_crc32(unsigned char *s, int len);
-
-// Gary S. Brown's 32 bit CRC
-
-__externC cyg_uint32
-cyg_crc32(unsigned char *s, int len);
-
-// Gary S. Brown's 32 bit CRC, but accumulate the result from a
-// previous CRC calculation
-
-__externC cyg_uint32
-cyg_crc32_accumulate(cyg_uint32 crc, unsigned char *s, int len);
-
-// Ethernet FCS Algorithm
-
-__externC cyg_uint32
-cyg_ether_crc32(unsigned char *s, int len);
-
-// Ethernet FCS algorithm, but accumulate the result from a previous
-// CRC calculation.
-
-__externC cyg_uint32
-cyg_ether_crc32_accumulate(cyg_uint32 crc, unsigned char *s, int len);
-
-// 16 bit CRC with polynomial x^16+x^12+x^5+1
-
-__externC cyg_uint16
-cyg_crc16(unsigned char *s, int len);
-
-#endif // _SERVICES_CRC_CRC_H_
-
-
-

package/boot/rbcfg/src/cyg_crc32.c

@@ -1,172 +0,0 @@
-//==========================================================================
-//
-//      crc32.c
-//
-//      Gary S. Brown's 32 bit CRC
-//
-//==========================================================================
-//####ECOSGPLCOPYRIGHTBEGIN####
-// -------------------------------------------
-// This file is part of eCos, the Embedded Configurable Operating System.
-// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
-// Copyright (C) 2002 Gary Thomas
-//
-// eCos is free software; you can redistribute it and/or modify it under
-// the terms of the GNU General Public License as published by the Free
-// Software Foundation; either version 2 or (at your option) any later version.
-//
-// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
-// WARRANTY; without even the implied warranty of MERCHANTABILITY or
-// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-// for more details.
-//
-// You should have received a copy of the GNU General Public License along
-// with eCos; if not, write to the Free Software Foundation, Inc.,
-// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-//
-// As a special exception, if other files instantiate templates or use macros
-// or inline functions from this file, or you compile this file and link it
-// with other works to produce a work based on this file, this file does not
-// by itself cause the resulting work to be covered by the GNU General Public
-// License. However the source code for this file must still be made available
-// in accordance with section (3) of the GNU General Public License.
-//
-// This exception does not invalidate any other reasons why a work based on
-// this file might be covered by the GNU General Public License.
-//
-// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
-// at http://sources.redhat.com/ecos/ecos-license/
-// -------------------------------------------
-//####ECOSGPLCOPYRIGHTEND####
-//==========================================================================
-//#####DESCRIPTIONBEGIN####
-//
-// Author(s):    gthomas
-// Contributors: gthomas,asl
-// Date:         2001-01-31
-// Purpose:      
-// Description:  
-//              
-// This code is part of eCos (tm).
-//
-//####DESCRIPTIONEND####
-//
-//==========================================================================
-
-#if 0
-#include <cyg/crc/crc.h>
-#else
-#include "cyg_crc.h"
-#endif
-
-  /* ====================================================================== */
-  /*  COPYRIGHT (C) 1986 Gary S. Brown.  You may use this program, or       */
-  /*  code or tables extracted from it, as desired without restriction.     */
-  /*                                                                        */
-  /*  First, the polynomial itself and its table of feedback terms.  The    */
-  /*  polynomial is                                                         */
-  /*  X^32+X^26+X^23+X^22+X^16+X^12+X^11+X^10+X^8+X^7+X^5+X^4+X^2+X^1+X^0   */
-  /*                                                                        */
-  /* ====================================================================== */
-
-static const cyg_uint32 crc32_tab[] = {
-      0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L,
-      0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L,
-      0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L,
-      0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL,
-      0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L,
-      0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L,
-      0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L,
-      0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL,
-      0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L,
-      0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL,
-      0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L,
-      0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L,
-      0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L,
-      0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL,
-      0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL,
-      0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L,
-      0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL,
-      0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L,
-      0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L,
-      0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L,
-      0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL,
-      0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L,
-      0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L,
-      0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL,
-      0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L,
-      0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L,
-      0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L,
-      0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L,
-      0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L,
-      0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL,
-      0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL,
-      0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L,
-      0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L,
-      0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL,
-      0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL,
-      0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L,
-      0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL,
-      0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L,
-      0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL,
-      0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L,
-      0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL,
-      0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L,
-      0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L,
-      0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL,
-      0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L,
-      0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L,
-      0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L,
-      0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L,
-      0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L,
-      0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L,
-      0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL,
-      0x2d02ef8dL
-   };
-
-/* This is the standard Gary S. Brown's 32 bit CRC algorithm, but
-   accumulate the CRC into the result of a previous CRC. */
-cyg_uint32 
-cyg_crc32_accumulate(cyg_uint32 crc32val, unsigned char *s, int len)
-{
-  int i;
-
-  for (i = 0;  i < len;  i++) {
-    crc32val = crc32_tab[(crc32val ^ s[i]) & 0xff] ^ (crc32val >> 8);
-  }
-  return crc32val;
-}
-
-/* This is the standard Gary S. Brown's 32 bit CRC algorithm */
-cyg_uint32
-cyg_crc32(unsigned char *s, int len)
-{
-  return (cyg_crc32_accumulate(0,s,len));
-}
-
-/* Return a 32-bit CRC of the contents of the buffer accumulating the
-   result from a previous CRC calculation. This uses the Ethernet FCS
-   algorithm.*/
-cyg_uint32
-cyg_ether_crc32_accumulate(cyg_uint32 crc32val, unsigned char *s, int len)
-{
-  int i;
-
-  if (s == 0) return 0L;
-  
-  crc32val = crc32val ^ 0xffffffff;
-  for (i = 0;  i < len;  i++) {
-      crc32val = crc32_tab[(crc32val ^ s[i]) & 0xff] ^ (crc32val >> 8);
-  }
-  return crc32val ^ 0xffffffff;
-}
-
-/* Return a 32-bit CRC of the contents of the buffer, using the
-   Ethernet FCS algorithm. */
-cyg_uint32
-cyg_ether_crc32(unsigned char *s, int len)
-{
-  return cyg_ether_crc32_accumulate(0,s,len);
-}
-
-

package/boot/rbcfg/src/main.c

@@ -1,922 +0,0 @@
-/*
- *  RouterBOOT configuration utility
- *
- *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2017 Thibaut VARENE <varenet@parisc-linux.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <stddef.h>
-#include <stdint.h>
-#include <string.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <sys/stat.h>
-#include <linux/limits.h>
-
-#include "rbcfg.h"
-#include "cyg_crc.h"
-
-#define RBCFG_TMP_FILE	"/tmp/.rbcfg"
-#define RBCFG_MTD_NAME	"soft_config"
-
-#define RB_ERR_NOTFOUND		1
-#define RB_ERR_INVALID		2
-#define RB_ERR_NOMEM		3
-#define RB_ERR_IO		4
-#define RB_ERR_NOTWANTED	5
-
-#define ARRAY_SIZE(_a)	(sizeof((_a)) / sizeof((_a)[0]))
-
-struct rbcfg_ctx {
-	char		*mtd_device;
-	char		*tmp_file;
-	char		*buf;
-	unsigned	buflen;
-};
-
-struct rbcfg_value {
-	const char		*name;
-	const char		*desc;
-	union {
-		uint32_t	u32;
-		const char	*raw;
-	} val;
-};
-
-#define RBCFG_ENV_TYPE_U32	0
-
-struct rbcfg_env {
-	const char			*name;
-	int				type;
-	uint16_t			id;
-	const struct rbcfg_value	*values;
-	int				num_values;
-};
-
-#define CMD_FLAG_USES_CFG	0x01
-
-struct rbcfg_command {
-	const char	*command;
-	const char	*usage;
-	int		flags;
-	int		(*exec)(int argc, const char *argv[]);
-};
-
-struct rbcfg_soc {
-	const char	*needle;
-	const int	type;
-};
-
-static void usage(void);
-
-/* Globals */
-
-static struct rbcfg_ctx *rbcfg_ctx;
-static char *rbcfg_name;
-
-#define CFG_U32(_name, _desc, _val) { 	\
-	.name		= (_name),	\
-	.desc		= (_desc),	\
-	.val.u32	= (_val),	\
-}
-
-static const struct rbcfg_value rbcfg_boot_delay[] = {
-	CFG_U32("1", "1 second", RB_BOOT_DELAY_1SEC),
-	CFG_U32("2", "2 seconds", RB_BOOT_DELAY_2SEC),
-	CFG_U32("3", "3 seconds", RB_BOOT_DELAY_3SEC),
-	CFG_U32("4", "4 seconds", RB_BOOT_DELAY_4SEC),
-	CFG_U32("5", "5 seconds", RB_BOOT_DELAY_5SEC),
-	CFG_U32("6", "6 seconds", RB_BOOT_DELAY_6SEC),
-	CFG_U32("7", "7 seconds", RB_BOOT_DELAY_7SEC),
-	CFG_U32("8", "8 seconds", RB_BOOT_DELAY_8SEC),
-	CFG_U32("9", "9 seconds", RB_BOOT_DELAY_9SEC),
-};
-
-static const struct rbcfg_value rbcfg_boot_device[] = {
-	CFG_U32("eth", "boot over Ethernet",
-		RB_BOOT_DEVICE_ETHER),
-	CFG_U32("nandeth", "boot from NAND, if fail then Ethernet",
-		RB_BOOT_DEVICE_NANDETH),
-	CFG_U32("ethnand", "boot Ethernet once, then NAND",
-		RB_BOOT_DEVICE_ETHONCE),
-	CFG_U32("nand", "boot from NAND only",
-		RB_BOOT_DEVICE_NANDONLY),
-	CFG_U32("flash", "boot in flash configuration mode",
-		RB_BOOT_DEVICE_FLASHCFG),
-	CFG_U32("flashnand", "boot in flash configuration mode once, then NAND",
-		RB_BOOT_DEVICE_FLSHONCE),
-};
-
-static const struct rbcfg_value rbcfg_boot_key[] = {
-	CFG_U32("any", "any key", RB_BOOT_KEY_ANY),
-	CFG_U32("del", "<Delete> key only", RB_BOOT_KEY_DEL),
-};
-
-static const struct rbcfg_value rbcfg_boot_protocol[] = {
-	CFG_U32("bootp", "BOOTP protocol", RB_BOOT_PROTOCOL_BOOTP),
-	CFG_U32("dhcp", "DHCP protocol", RB_BOOT_PROTOCOL_DHCP),
-};
-
-static const struct rbcfg_value rbcfg_uart_speed[] = {
-	CFG_U32("115200", "", RB_UART_SPEED_115200),
-	CFG_U32("57600", "", RB_UART_SPEED_57600),
-	CFG_U32("38400", "", RB_UART_SPEED_38400),
-	CFG_U32("19200", "", RB_UART_SPEED_19200),
-	CFG_U32("9600", "", RB_UART_SPEED_9600),
-	CFG_U32("4800", "", RB_UART_SPEED_4800),
-	CFG_U32("2400", "", RB_UART_SPEED_2400),
-	CFG_U32("1200", "", RB_UART_SPEED_1200),
-	CFG_U32("off", "disable console output", RB_UART_SPEED_OFF),
-};
-
-static const struct rbcfg_value rbcfg_cpu_mode[] = {
-	CFG_U32("powersave", "power save", RB_CPU_MODE_POWERSAVE),
-	CFG_U32("regular", "regular (better for -0c environment)",
-		RB_CPU_MODE_REGULAR),
-};
-
-static const struct rbcfg_value rbcfg_cpu_freq_dummy[] = {
-};
-
-static const struct rbcfg_value rbcfg_cpu_freq_qca953x[] = {
-	CFG_U32("-2", "-100MHz", RB_CPU_FREQ_L2),
-	CFG_U32("-1", "- 50MHz", RB_CPU_FREQ_L1),
-	CFG_U32("0", "Factory", RB_CPU_FREQ_N0),
-	CFG_U32("+1", "+ 50MHz", RB_CPU_FREQ_H1),
-	CFG_U32("+2", "+100MHz", RB_CPU_FREQ_H2),
-};
-
-static const struct rbcfg_value rbcfg_cpu_freq_ar9344[] = {
-	CFG_U32("-2", "-100MHz", RB_CPU_FREQ_L2),
-	CFG_U32("-1", "- 50MHz", RB_CPU_FREQ_L1),
-	CFG_U32("0", "Factory", RB_CPU_FREQ_N0),
-	CFG_U32("+1", "+ 50MHz", RB_CPU_FREQ_H1),
-	CFG_U32("+2", "+100MHz", RB_CPU_FREQ_H2),
-	CFG_U32("+3", "+150MHz", RB_CPU_FREQ_H3),
-};
-
-static const struct rbcfg_value rbcfg_booter[] = {
-	CFG_U32("regular", "load regular booter", RB_BOOTER_REGULAR),
-	CFG_U32("backup", "force backup-booter loading", RB_BOOTER_BACKUP),
-};
-
-static struct rbcfg_env rbcfg_envs[] = {
-	{
-		.name		= "boot_delay",
-		.id		= RB_ID_BOOT_DELAY,
-		.type		= RBCFG_ENV_TYPE_U32,
-		.values		= rbcfg_boot_delay,
-		.num_values	= ARRAY_SIZE(rbcfg_boot_delay),
-	}, {
-		.name		= "boot_device",
-		.id		= RB_ID_BOOT_DEVICE,
-		.type		= RBCFG_ENV_TYPE_U32,
-		.values		= rbcfg_boot_device,
-		.num_values	= ARRAY_SIZE(rbcfg_boot_device),
-	}, {
-		.name		= "boot_key",
-		.id		= RB_ID_BOOT_KEY,
-		.type		= RBCFG_ENV_TYPE_U32,
-		.values		= rbcfg_boot_key,
-		.num_values	= ARRAY_SIZE(rbcfg_boot_key),
-	}, {
-		.name		= "boot_protocol",
-		.id		= RB_ID_BOOT_PROTOCOL,
-		.type		= RBCFG_ENV_TYPE_U32,
-		.values		= rbcfg_boot_protocol,
-		.num_values	= ARRAY_SIZE(rbcfg_boot_protocol),
-	}, {
-		.name		= "booter",
-		.id		= RB_ID_BOOTER,
-		.type		= RBCFG_ENV_TYPE_U32,
-		.values		= rbcfg_booter,
-		.num_values	= ARRAY_SIZE(rbcfg_booter),
-	}, {
-		.name		= "cpu_mode",
-		.id		= RB_ID_CPU_MODE,
-		.type		= RBCFG_ENV_TYPE_U32,
-		.values		= rbcfg_cpu_mode,
-		.num_values	= ARRAY_SIZE(rbcfg_cpu_mode),
-	}, {
-		.name		= "cpu_freq",
-		.id		= RB_ID_CPU_FREQ,
-		.type		= RBCFG_ENV_TYPE_U32,
-		.values		= rbcfg_cpu_freq_dummy,
-		.num_values	= ARRAY_SIZE(rbcfg_cpu_freq_dummy),
-	}, {
-		.name		= "uart_speed",
-		.id		= RB_ID_UART_SPEED,
-		.type		= RBCFG_ENV_TYPE_U32,
-		.values		= rbcfg_uart_speed,
-		.num_values	= ARRAY_SIZE(rbcfg_uart_speed),
-	}
-};
-
-static inline uint16_t
-get_u16(const void *buf)
-{
-	const uint8_t *p = buf;
-
-	return ((uint16_t) p[1] + ((uint16_t) p[0] << 8));
-}
-
-static inline uint32_t
-get_u32(const void *buf)
-{
-	const uint8_t *p = buf;
-
-	return ((uint32_t) p[3] + ((uint32_t) p[2] << 8) +
-	       ((uint32_t) p[1] << 16) + ((uint32_t) p[0] << 24));
-}
-
-static inline void
-put_u32(void *buf, uint32_t val)
-{
-	uint8_t *p = buf;
-
-	p[3] = val & 0xff;
-	p[2] = (val >> 8) & 0xff;
-	p[1] = (val >> 16) & 0xff;
-	p[0] = (val >> 24) & 0xff;
-}
-
-static int
-rbcfg_find_tag(struct rbcfg_ctx *ctx, uint16_t tag_id, uint16_t *tag_len,
-	       void **tag_data)
-{
-	uint16_t id;
-	uint16_t len;
-	char *buf = ctx->buf;
-	unsigned int buflen = ctx->buflen;
-	int ret = RB_ERR_NOTFOUND;
-
-	/* skip magic and CRC value */
-	buf += 8;
-	buflen -= 8;
-
-	while (buflen > 2) {
-		len = get_u16(buf);
-		buf += 2;
-		buflen -= 2;
-
-		if (buflen < 2)
-			break;
-
-		id = get_u16(buf);
-		buf += 2;
-		buflen -= 2;
-
-		if (id == RB_ID_TERMINATOR) {
-			ret = RB_ERR_NOTWANTED;
-			break;
-		}
-
-		if (buflen < len)
-			break;
-
-		if (id == tag_id) {
-			*tag_len = len;
-			*tag_data = buf;
-			ret = 0;
-			break;
-		}
-
-		buf += len;
-		buflen -= len;
-	}
-
-	if (RB_ERR_NOTFOUND == ret)
-		fprintf(stderr, "no tag found with id=%u\n", tag_id);
-
-	return ret;
-}
-
-static int
-rbcfg_get_u32(struct rbcfg_ctx *ctx, uint16_t id, uint32_t *val)
-{
-	void *tag_data;
-	uint16_t tag_len;
-	int err;
-
-	err = rbcfg_find_tag(ctx, id, &tag_len, &tag_data);
-	if (err)
-		return err;
-
-	*val = get_u32(tag_data);
-	return 0;
-}
-
-static int
-rbcfg_set_u32(struct rbcfg_ctx *ctx, uint16_t id, uint32_t val)
-{
-	void *tag_data;
-	uint16_t tag_len;
-	int err;
-
-	err = rbcfg_find_tag(ctx, id, &tag_len, &tag_data);
-	if (err)
-		return err;
-
-	put_u32(tag_data, val);
-	return 0;
-}
-
-char *rbcfg_find_mtd(const char *name, int *erase_size)
-{
-	FILE *f;
-	int mtd_num;
-	char dev[PATH_MAX];
-	char *ret = NULL;
-	struct stat s;
-	int err;
-
-	f = fopen("/proc/mtd", "r");
-	if (!f)
-		return NULL;
-
-	while (1) {
-		char *p;
-		p = fgets(dev, sizeof(dev), f);
-		if (!p)
-			break;
-
-		if (!strstr(dev, name))
-			continue;
-
-		err = sscanf(dev, "mtd%d: %08x", &mtd_num, erase_size);
-		if (err != 2)
-			break;
-
-		sprintf(dev, "/dev/mtdblock%d", mtd_num);
-		err = stat(dev, &s);
-		if (err < 0)
-			break;
-
-		if ((s.st_mode & S_IFBLK) == 0)
-			break;
-
-		ret = malloc(strlen(dev) + 1);
-		if (ret == NULL)
-			break;
-
-		strncpy(ret, dev, strlen(dev) + 1);
-		break;
-	}
-
-	fclose(f);
-	return ret;
-}
-
-static int
-rbcfg_check_tmp(struct rbcfg_ctx *ctx)
-{
-	struct stat s;
-	int err;
-
-	err = stat(ctx->tmp_file, &s);
-	if (err < 0)
-		return 0;
-
-	if ((s.st_mode & S_IFREG) == 0)
-		return 0;
-
-	if (s.st_size != ctx->buflen)
-		return 0;
-
-	return 1;
-}
-
-static int
-rbcfg_load(struct rbcfg_ctx *ctx)
-{
-	uint32_t magic;
-	uint32_t crc_orig, crc;
-	char *name;
-	int tmp;
-	int fd;
-	int err;
-
-	tmp = rbcfg_check_tmp(ctx);
-	name = (tmp) ? ctx->tmp_file : ctx->mtd_device;
-
-	fd = open(name, O_RDONLY);
-	if (fd < 0) {
-		fprintf(stderr, "unable to open %s\n", name);
-		err = RB_ERR_IO;
-		goto err;
-	}
-
-	err = read(fd, ctx->buf, ctx->buflen);
-	if (err != ctx->buflen) {
-		fprintf(stderr, "unable to read from %s\n", name);
-		err = RB_ERR_IO;
-		goto err_close;
-	}
-
-	magic = get_u32(ctx->buf);
-	if (magic != RB_MAGIC_SOFT) {
-		fprintf(stderr, "invalid configuration\n");
-		err = RB_ERR_INVALID;
-		goto err_close;
-	}
-
-	crc_orig = get_u32(ctx->buf + 4);
-	put_u32(ctx->buf + 4, 0);
-	crc = cyg_ether_crc32((unsigned char *) ctx->buf, ctx->buflen);
-	if (crc != crc_orig) {
-		fprintf(stderr, "configuration has CRC error\n");
-		err = RB_ERR_INVALID;
-		goto err_close;
-	}
-
-	err = 0;
-
- err_close:
-	close(fd);
- err:
-	return err;
-}
-
-static int
-rbcfg_open()
-{
-	char *mtd_device;
-	struct rbcfg_ctx *ctx;
-	int buflen;
-	int err;
-
-	mtd_device = rbcfg_find_mtd(RBCFG_MTD_NAME, &buflen);
-	if (!mtd_device) {
-		fprintf(stderr, "unable to find configuration\n");
-		return RB_ERR_NOTFOUND;
-	}
-
-	ctx = malloc(sizeof(struct rbcfg_ctx) + buflen);
-	if (ctx == NULL) {
-		err = RB_ERR_NOMEM;
-		goto err_free_mtd;
-	}
-
-	ctx->mtd_device = mtd_device;
-	ctx->tmp_file = RBCFG_TMP_FILE;
-	ctx->buflen = buflen;
-	ctx->buf = (char *) &ctx[1];
-
-	err = rbcfg_load(ctx);
-	if (err)
-		goto err_free_ctx;
-
-	rbcfg_ctx = ctx;
-	return 0;
-
- err_free_ctx:
-	free(ctx);
- err_free_mtd:
-	free(mtd_device);
-	return err;
-}
-
-static int
-rbcfg_update(int tmp)
-{
-	struct rbcfg_ctx *ctx = rbcfg_ctx;
-	char *name;
-	uint32_t crc;
-	int fd;
-	int err;
-
-	put_u32(ctx->buf, RB_MAGIC_SOFT);
-	put_u32(ctx->buf + 4, 0);
-	crc = cyg_ether_crc32((unsigned char *) ctx->buf, ctx->buflen);
-	put_u32(ctx->buf + 4, crc);
-
-	name = (tmp) ? ctx->tmp_file : ctx->mtd_device;
-	fd = open(name, O_WRONLY | O_CREAT, 0640);
-	if (fd < 0) {
-		fprintf(stderr, "unable to open %s for writing\n", name);
-		err = RB_ERR_IO;
-		goto out;
-	}
-
-	err = write(fd, ctx->buf, ctx->buflen);
-	if (err != ctx->buflen) {
-		err = RB_ERR_IO;
-		goto out_close;
-	}
-
-	fsync(fd);
-	err = 0;
-
- out_close:
-	close(fd);
- out:
-	return err;
-}
-
-static void
-rbcfg_close(void)
-{
-	struct rbcfg_ctx *ctx;
-
-	ctx = rbcfg_ctx;
-	free(ctx->mtd_device);
-	free(ctx);
-}
-
-static const struct rbcfg_value *
-rbcfg_env_find(const struct rbcfg_env *env, const char *name)
-{
-	unsigned i;
-
-	for (i = 0; i < env->num_values; i++) {
-		const struct rbcfg_value *v = &env->values[i];
-
-		if (strcmp(v->name, name) == 0)
-			return v;
-	}
-
-	return NULL;
-}
-
-static const struct rbcfg_value *
-rbcfg_env_find_u32(const struct rbcfg_env *env, uint32_t val)
-{
-	unsigned i;
-
-	for (i = 0; i < env->num_values; i++) {
-		const struct rbcfg_value *v = &env->values[i];
-
-		if (v->val.u32 == val)
-			return v;
-	}
-
-	return NULL;
-}
-
-static const char *
-rbcfg_env_get_u32(const struct rbcfg_env *env)
-{
-	const struct rbcfg_value *v;
-	uint32_t val;
-	int err;
-
-	err = rbcfg_get_u32(rbcfg_ctx, env->id, &val);
-	if (err)
-		return NULL;
-
-	v = rbcfg_env_find_u32(env, val);
-	if (v == NULL) {
-		fprintf(stderr, "unknown value %08x found for %s\n",
-			val, env->name);
-		return NULL;
-	}
-
-	return v->name;
-}
-
-static int
-rbcfg_env_set_u32(const struct rbcfg_env *env, const char *data)
-{
-	const struct rbcfg_value *v;
-	int err;
-
-	v = rbcfg_env_find(env, data);
-	if (v == NULL) {
-		fprintf(stderr, "invalid value '%s'\n", data);
-		return RB_ERR_INVALID;
-	}
-
-	err = rbcfg_set_u32(rbcfg_ctx, env->id, v->val.u32);
-	return err;
-}
-
-static const char *
-rbcfg_env_get(const struct rbcfg_env *env)
-{
-	const char *ret = NULL;
-
-	switch (env->type) {
-	case RBCFG_ENV_TYPE_U32:
-		ret = rbcfg_env_get_u32(env);
-		break;
-	}
-
-	return ret;
-}
-
-static int
-rbcfg_env_set(const struct rbcfg_env *env, const char *data)
-{
-	int ret = 0;
-
-	switch (env->type) {
-	case RBCFG_ENV_TYPE_U32:
-		ret = rbcfg_env_set_u32(env, data);
-		break;
-	}
-
-	return ret;
-}
-
-static int
-rbcfg_cmd_apply(int argc, const char *argv[])
-{
-	return rbcfg_update(0);
-}
-
-static int
-rbcfg_cmd_help(int argc, const char *argv[])
-{
-	usage();
-	return 0;
-}
-
-static int
-rbcfg_cmd_get(int argc, const char *argv[])
-{
-	int err = RB_ERR_NOTFOUND;
-	int i;
-
-	if (argc != 1) {
-		usage();
-		return RB_ERR_INVALID;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(rbcfg_envs); i++) {
-		const struct rbcfg_env *env = &rbcfg_envs[i];
-		const char *value;
-
-		if (strcmp(env->name, argv[0]))
-			continue;
-
-		value = rbcfg_env_get(env);
-		if (value) {
-			fprintf(stdout, "%s\n", value);
-			err = 0;
-		}
-		break;
-	}
-
-	return err;
-}
-
-static int
-rbcfg_cmd_set(int argc, const char *argv[])
-{
-	int err = RB_ERR_INVALID;
-	int i;
-
-	if (argc != 2) {
-		/* not enough parameters */
-		usage();
-		return RB_ERR_INVALID;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(rbcfg_envs); i++) {
-		const struct rbcfg_env *env = &rbcfg_envs[i];
-
-		if (strcmp(env->name, argv[0]))
-			continue;
-
-		err = rbcfg_env_set(env, argv[1]);
-		if (err == 0)
-			err = rbcfg_update(1);
-		break;
-	}
-
-	return err;
-}
-
-static int
-rbcfg_cmd_show(int argc, const char *argv[])
-{
-	int i;
-
-	if (argc != 0) {
-		usage();
-		return RB_ERR_INVALID;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(rbcfg_envs); i++) {
-		const struct rbcfg_env *env = &rbcfg_envs[i];
-		const char *value;
-
-		value = rbcfg_env_get(env);
-		if (value)
-			fprintf(stdout, "%s=%s\n", env->name, value);
-	}
-
-	return 0;
-}
-
-static const struct rbcfg_command rbcfg_commands[] = {
-	{
-		.command	= "apply",
-		.usage		= "apply\n"
-				  "\t- write configuration to the mtd device",
-		.flags		= CMD_FLAG_USES_CFG,
-		.exec		= rbcfg_cmd_apply,
-	}, {
-		.command	= "help",
-		.usage		= "help\n"
-				  "\t- show this screen",
-		.exec		= rbcfg_cmd_help,
-	}, {
-		.command	= "get",
-		.usage		= "get <name>\n"
-				  "\t- get value of the configuration option <name>",
-		.flags		= CMD_FLAG_USES_CFG,
-		.exec		= rbcfg_cmd_get,
-	}, {
-		.command	= "set",
-		.usage		= "set <name> <value>\n"
-				  "\t- set value of the configuration option <name> to <value>",
-		.flags		= CMD_FLAG_USES_CFG,
-		.exec		= rbcfg_cmd_set,
-	}, {
-		.command	= "show",
-		.usage		= "show\n"
-				  "\t- show value of all configuration options",
-		.flags		= CMD_FLAG_USES_CFG,
-		.exec		= rbcfg_cmd_show,
-	}
-};
-
-static void
-usage(void)
-{
-	char buf[255];
-	int len;
-	int i;
-
-	fprintf(stderr, "Usage: %s <command>\n", rbcfg_name);
-
-	fprintf(stderr, "\nCommands:\n");
-	for (i = 0; i < ARRAY_SIZE(rbcfg_commands); i++) {
-		const struct rbcfg_command *cmd;
-		cmd = &rbcfg_commands[i];
-
-		len = snprintf(buf, sizeof(buf), "%s", cmd->usage);
-		buf[len] = '\0';
-		fprintf(stderr, "%s\n", buf);
-	}
-
-	fprintf(stderr, "\nConfiguration options:\n");
-	for (i = 0; i < ARRAY_SIZE(rbcfg_envs); i++) {
-		const struct rbcfg_env *env;
-		int j;
-
-		env = &rbcfg_envs[i];
-		fprintf(stderr, "\n%s:\n", env->name);
-		for (j = 0; j < env->num_values; j++) {
-			const struct rbcfg_value *v = &env->values[j];
-			fprintf(stderr, "\t%-12s %s\n", v->name, v->desc);
-		}
-	}
-	fprintf(stderr, "\n");
-}
-
-#define RBCFG_SOC_UNKNOWN	0
-#define RBCFG_SOC_QCA953X	1
-#define RBCFG_SOC_AR9344	2
-
-static const struct rbcfg_soc rbcfg_socs[] = {
-	{
-		.needle = "QCA953",
-		.type = RBCFG_SOC_QCA953X,
-	}, {
-		.needle = "AR9344",
-		.type = RBCFG_SOC_AR9344,
-	},
-};
-
-#define CPUINFO_BUFSIZE		128	/* lines of interest are < 80 chars */
-
-static int cpuinfo_find_soc(void)
-{
-	FILE *fp;
-	char temp[CPUINFO_BUFSIZE];
-	char *haystack, *needle;
-	int i, found = 0, soc_type = RBCFG_SOC_UNKNOWN;
-
-	fp = fopen("/proc/cpuinfo", "r");
-	if (!fp)
-		goto end;
-
-	/* first, extract the system type line */
-	needle = "system type";
-	while(fgets(temp, CPUINFO_BUFSIZE, fp)) {
-		if (!strncmp(temp, needle, strlen(needle))) {
-			found = 1;
-			break;
-		}
-	}
-
-	fclose(fp);
-
-	/* failsafe in case cpuinfo format changes */
-	if (!found)
-		goto end;
-
-	/* skip the field header */
-	haystack = strchr(temp, ':');
-
-	/* then, try to identify known SoC, stop at first match */
-	for (i = 0; i < ARRAY_SIZE(rbcfg_socs); i++) {
-		if ((strstr(haystack, rbcfg_socs[i].needle))) {
-			soc_type = rbcfg_socs[i].type;
-			break;
-		}
-	}
-
-end:
-	return soc_type;
-}
-
-static void fixup_rbcfg_envs(void)
-{
-	int i, num_val, soc_type;
-	const struct rbcfg_value * env_value;
-
-	/* detect SoC */
-	soc_type = cpuinfo_find_soc();
-
-	/* update rbcfg_envs */
-	switch (soc_type) {
-		case RBCFG_SOC_QCA953X:
-			env_value = rbcfg_cpu_freq_qca953x;
-			num_val = ARRAY_SIZE(rbcfg_cpu_freq_qca953x);
-			break;
-		case RBCFG_SOC_AR9344:
-			env_value = rbcfg_cpu_freq_ar9344;
-			num_val = ARRAY_SIZE(rbcfg_cpu_freq_ar9344);
-			break;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(rbcfg_envs); i++) {
-		if (RB_ID_CPU_FREQ == rbcfg_envs[i].id) {
-			if (RBCFG_SOC_UNKNOWN == soc_type)
-				rbcfg_envs[i].id = RB_ID_TERMINATOR;
-			else {
-				rbcfg_envs[i].values = env_value;
-				rbcfg_envs[i].num_values = num_val;
-			}
-			break;
-		}
-	}
-}
-
-int main(int argc, const char *argv[])
-{
-	const struct rbcfg_command *cmd = NULL;
-	int ret;
-	int i;
-
-	rbcfg_name = (char *) argv[0];
-
-	fixup_rbcfg_envs();
-
-	if (argc < 2) {
-		usage();
-		return EXIT_FAILURE;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(rbcfg_commands); i++) {
-		if (strcmp(rbcfg_commands[i].command, argv[1]) == 0) {
-			cmd = &rbcfg_commands[i];
-			break;
-		}
-	}
-
-	if (cmd == NULL) {
-		fprintf(stderr, "unknown command '%s'\n", argv[1]);
-		usage();
-		return EXIT_FAILURE;
-	}
-
-	argc -= 2;
-	argv += 2;
-
-	if (cmd->flags & CMD_FLAG_USES_CFG) {
-		ret = rbcfg_open();
-		if (ret)
-			return EXIT_FAILURE;
-	}
-
-	ret = cmd->exec(argc, argv);
-
-	if (cmd->flags & CMD_FLAG_USES_CFG)
-		rbcfg_close();
-
-	if (ret)
-		return EXIT_FAILURE;
-
-	return EXIT_SUCCESS;
-}

package/boot/rbcfg/src/rbcfg.h

@@ -1,85 +0,0 @@
-/*
- *  Mikrotik's RouterBOOT configuration defines
- *
- *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _RBCFG_H
-#define _RBCFG_H
-
-/*
- * Magic numbers
- */
-#define RB_MAGIC_SOFT	0x74666f53 /* 'Soft' */
-
-/*
- * ID values for Software settings
- */
-#define RB_ID_TERMINATOR	0
-#define RB_ID_UART_SPEED	1
-#define RB_ID_BOOT_DELAY	2
-#define RB_ID_BOOT_DEVICE	3
-#define RB_ID_BOOT_KEY		4
-#define RB_ID_CPU_MODE		5
-#define RB_ID_FW_VERSION	6
-#define RB_ID_SOFT_07		7
-#define RB_ID_SOFT_08		8
-#define RB_ID_BOOT_PROTOCOL	9
-#define RB_ID_SOFT_10		10
-#define RB_ID_SOFT_11		11
-#define RB_ID_CPU_FREQ		12
-#define RB_ID_BOOTER		13
-
-#define RB_UART_SPEED_115200	0
-#define RB_UART_SPEED_57600	1
-#define RB_UART_SPEED_38400	2
-#define RB_UART_SPEED_19200	3
-#define RB_UART_SPEED_9600	4
-#define RB_UART_SPEED_4800	5
-#define RB_UART_SPEED_2400	6
-#define RB_UART_SPEED_1200	7
-#define RB_UART_SPEED_OFF	8
-
-#define RB_BOOT_DELAY_1SEC	1
-#define RB_BOOT_DELAY_2SEC	2
-#define RB_BOOT_DELAY_3SEC	3
-#define RB_BOOT_DELAY_4SEC	4
-#define RB_BOOT_DELAY_5SEC	5
-#define RB_BOOT_DELAY_6SEC	6
-#define RB_BOOT_DELAY_7SEC	7
-#define RB_BOOT_DELAY_8SEC	8
-#define RB_BOOT_DELAY_9SEC	9
-
-#define RB_BOOT_DEVICE_ETHER	0
-#define RB_BOOT_DEVICE_NANDETH	1
-#define RB_BOOT_DEVICE_CFCARD	2
-#define RB_BOOT_DEVICE_ETHONCE	3
-#define RB_BOOT_DEVICE_NANDONLY	5
-#define RB_BOOT_DEVICE_FLASHCFG	7
-#define RB_BOOT_DEVICE_FLSHONCE	8
-
-#define RB_BOOT_KEY_ANY		0
-#define RB_BOOT_KEY_DEL		1
-
-#define RB_CPU_MODE_POWERSAVE	0
-#define RB_CPU_MODE_REGULAR	1
-
-#define RB_BOOT_PROTOCOL_BOOTP	0
-#define RB_BOOT_PROTOCOL_DHCP	1
-
-#define RB_CPU_FREQ_L2		(0 << 3)
-#define RB_CPU_FREQ_L1		(1 << 3)
-#define RB_CPU_FREQ_N0		(2 << 3)
-#define RB_CPU_FREQ_H1		(3 << 3)
-#define RB_CPU_FREQ_H2		(4 << 3)
-#define RB_CPU_FREQ_H3		(5 << 3)
-
-#define RB_BOOTER_REGULAR	0
-#define RB_BOOTER_BACKUP	1
-
-#endif /* _RBCFG_H */

package/firmware/cypress-firmware/Makefile

@@ -11,6 +11,7 @@ UNPACK_CMD=unzip -q -p $(DL_DIR)/$(PKG_SOURCE) $(PKG_SOURCE_UNZIP) | gzip -dc |
 
 PKG_NAME:=cypress-firmware
 PKG_VERSION:=v5.4.18-2020_0402
+PKG_RELEASE:=2
 
 PKG_SOURCE_UNZIP:=cypress-firmware-$(PKG_VERSION).tar.gz
 PKG_SOURCE:=cypress-fmac-$(PKG_VERSION).zip
@@ -68,6 +69,7 @@ $(eval $(call BuildPackage,cypress-firmware-43340-sdio))
 define Package/cypress-firmware-43362-sdio
   $(Package/cypress-firmware-default)
   TITLE:=CYW43362 FullMac SDIO firmware
+  PROVIDES:=brcmfmac-firmware-43362-sdio
 endef
 
 define Package/cypress-firmware-43362-sdio/install
@@ -98,6 +100,7 @@ $(eval $(call BuildPackage,cypress-firmware-4339-sdio))
 define Package/cypress-firmware-43430-sdio
   $(Package/cypress-firmware-default)
   TITLE:=CYW43430 FullMac SDIO firmware
+  PROVIDES:=brcmfmac-firmware-43430-sdio
 endef
 
 define Package/cypress-firmware-43430-sdio/install
@@ -116,6 +119,7 @@ $(eval $(call BuildPackage,cypress-firmware-43430-sdio))
 define Package/cypress-firmware-43455-sdio
   $(Package/cypress-firmware-default)
   TITLE:=CYW43455 FullMac SDIO firmware
+  PROVIDES:=brcmfmac-firmware-43455-sdio
 endef
 
 define Package/cypress-firmware-43455-sdio/install

package/kernel/bcm27xx-gpu-fw/Makefile

@@ -2,8 +2,8 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=bcm27xx-gpu-fw
-PKG_VERSION:=2020-03-26
-PKG_RELEASE:=5574077183389cd4c65077ba18b59144ed6ccd6d
+PKG_VERSION:=2020-05-27
+PKG_RELEASE:=62fc8c01165a80021054a430182b504f7b877c2d
 
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)/rpi-firmware-$(PKG_RELEASE)
 
@@ -26,7 +26,7 @@ define Download/bootcode_bin
   FILE:=$(RPI_FIRMWARE_FILE)-bootcode.bin
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=bootcode.bin
-  HASH:=1e3582640b97f6a1ba77b66181fe698767d205f5d4c4315f56d03b398a7e55d1
+  HASH:=12c6b5fdd893ff60cddbad0fa8aea0ebd5328ed2a9cd39a2a09d7ac99621d5bf
 endef
 $(eval $(call Download,bootcode_bin))
 
@@ -34,7 +34,7 @@ define Download/fixup_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup.dat
-  HASH:=1b90af0c87d5f705b5b6d921b2b47d37f73af81c5c9fb1d683201e619a00d2df
+  HASH:=25d39e703af377ca6412c0ac68e6739d2ffb56634b9a7262140d26d8150fdf23
 endef
 $(eval $(call Download,fixup_dat))
 
@@ -42,7 +42,7 @@ define Download/fixup_cd_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup_cd.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup_cd.dat
-  HASH:=134c5f3db2de3e5fd285bd4073016f074cf4151cdd1bfe3443b9a14700d48a55
+  HASH:=9639f81ad007561048bb3956e88da425a84cef37f307a16734cdcfcdcbd40b4c
 endef
 $(eval $(call Download,fixup_cd_dat))
 
@@ -50,7 +50,7 @@ define Download/fixup_x_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup_x.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup_x.dat
-  HASH:=32fd8182a9a603f41acb7d542cbb15aa4e84c2768816ae48e36b68d0d4e1754c
+  HASH:=538c4d514b55c09670bbc7bdc092e44ff1f572c4f124a47c5b514f120dff6263
 endef
 $(eval $(call Download,fixup_x_dat))
 
@@ -58,7 +58,7 @@ define Download/fixup4_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup4.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup4.dat
-  HASH:=605b28219ba13b73dbf57a45e995e7ea090421ad96a971c950afb34e0d3f7841
+  HASH:=75312421da0e036f9d451facb848bd439247e4322ee2d36bbfe2f7acc9a6d681
 endef
 $(eval $(call Download,fixup4_dat))
 
@@ -66,7 +66,7 @@ define Download/fixup4cd_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup4cd.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup4cd.dat
-  HASH:=a3a4c600472032cd6597e774f0b7be2cebbfa918ccfd7fa1cfecdf853c5f61a9
+  HASH:=9639f81ad007561048bb3956e88da425a84cef37f307a16734cdcfcdcbd40b4c
 endef
 $(eval $(call Download,fixup4cd_dat))
 
@@ -74,7 +74,7 @@ define Download/fixup4x_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup4x.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup4x.dat
-  HASH:=c196692b2cac949fdeb354364eb15da83d192d77ab698cf3fe43142401c5281c
+  HASH:=d3d1a044412a22a7c366d57e79433532e137e9b184ea9ea68b0eb7577e70e4f3
 endef
 $(eval $(call Download,fixup4x_dat))
 
@@ -82,7 +82,7 @@ define Download/start_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start.elf
-  HASH:=2364737aade5c6459a0dfd7b5d5070ab6a6139803779d3f94b579744b40731a5
+  HASH:=5980340e652491926f263ac89b7bc2ab513246bd3eb27103bba4780d6e8568f8
 endef
 $(eval $(call Download,start_elf))
 
@@ -90,7 +90,7 @@ define Download/start_cd_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start_cd.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start_cd.elf
-  HASH:=12b98b6c5336b4f1ee1a61753bd6471ce7ce8ee2644550dc79c8e41d3ee4e719
+  HASH:=389a44e371802207ed56fe82a3beaf675eb51176112bde7d77546039d7085572
 endef
 $(eval $(call Download,start_cd_elf))
 
@@ -98,7 +98,7 @@ define Download/start_x_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start_x.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start_x.elf
-  HASH:=d21ece84f1ac70148787578ec7549a01d5fa7453b46119ab230470f8e403c0f9
+  HASH:=32016c544353b285394f0006d57a785239fee0262ed1b0ff80b8028c918f0ad9
 endef
 $(eval $(call Download,start_x_elf))
 
@@ -106,7 +106,7 @@ define Download/start4_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start4.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start4.elf
-  HASH:=98c4cba6bd4ee03a53b02816c645f783becd9f9899787f7b1bcb8a784eeca4c0
+  HASH:=ec26d746ddf76527b1702fbf7e76c7b036545cc43da81361a2887c92e4965dcc
 endef
 $(eval $(call Download,start4_elf))
 
@@ -114,7 +114,7 @@ define Download/start4cd_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start4cd.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start4cd.elf
-  HASH:=b9ee5a895563b891a74ac4be3e9e11be553aa69d600a196556328db164735f8a
+  HASH:=ee507a448911a9d82edf632decb160d5712ab43d8d32b1225f1c406d4eb87820
 endef
 $(eval $(call Download,start4cd_elf))
 
@@ -122,7 +122,7 @@ define Download/start4x_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start4x.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start4x.elf
-  HASH:=bd2741aca11ecface061fd93d6b412d4f2a777165d780f5a2924569c9417ed92
+  HASH:=9a32a06aadeb84649ee03a15f067fa9285791488ffe61b82f9788303a1355614
 endef
 $(eval $(call Download,start4x_elf))
 

package/kernel/broadcom-wl/Makefile

@@ -10,7 +10,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=broadcom-wl
 PKG_VERSION:=5.10.56.27.3
-PKG_RELEASE:=8
+PKG_RELEASE:=9
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(ARCH).tar.bz2
 PKG_SOURCE_URL:=http://downloads.openwrt.org/sources

package/kernel/broadcom-wl/files/lib/wifi/broadcom.sh

@@ -443,7 +443,10 @@ EOF
 	txpower=${txpower:-$vif_txpower}
 	[ -z "$txpower" ] || iwconfig $device txpower ${txpower}dBm
 
-	eval "$nas_cmd"
+	# fd 1000 is an inherited lock file descriptor for preventing concurrent
+	# init script executions. Close it here to prevent the nas daemon from
+	# inheriting it further to avoid holding the lock indefinitely.
+	eval "$nas_cmd 1000>&-"
 }
 
 

package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh

@@ -782,6 +782,7 @@ mac80211_setup_vif() {
 	case "$mode" in
 		mesh)
 			wireless_vif_parse_encryption
+			[ -z "$htmode" ] && htmode="NOHT";
 			freq="$(get_freq "$phy" "$channel")"
 			if [ "$wpa" -gt 0 -o "$auto_channel" -gt 0 ] || chan_is_dfs "$phy" "$channel"; then
 				mac80211_setup_supplicant $vif_enable || failed=1

package/network/services/hostapd/files/hostapd.sh

@@ -774,7 +774,8 @@ wpa_supplicant_set_fixed_freq() {
 	case "$htmode" in
 		VHT80) append network_data "max_oper_chwidth=1" "$N$T";;
 		VHT160) append network_data "max_oper_chwidth=2" "$N$T";;
-		*) append network_data "max_oper_chwidth=0" "$N$T";;
+		VHT20|VHT40) append network_data "max_oper_chwidth=0" "$N$T";;
+		*) append network_data "disable_vht=1" "$N$T";;
 	esac
 }
 

package/system/procd/Makefile

@@ -12,9 +12,9 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/procd.git
-PKG_SOURCE_DATE:=2020-05-15
-PKG_SOURCE_VERSION:=1ab539b3a8a0070b493112c8263ab380a689db66
-PKG_MIRROR_HASH:=fcc9fb1a046dbbea776ab1ca616c885e73d6a0a35c2278b8fddcc7e42d6b8647
+PKG_SOURCE_DATE:=2020-05-28
+PKG_SOURCE_VERSION:=b9b39e2061d7035a9d84eecbb4a4613deaf6d03f
+PKG_MIRROR_HASH:=0d6a96a2fb38f72c72b457a2a8638bee22f91009f9686152fcf4aee97846fc84
 CMAKE_INSTALL:=1
 
 PKG_LICENSE:=GPL-2.0

package/utils/bcm27xx-userland/Makefile

@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bcm27xx-userland
-PKG_VERSION:=6fb59736b1ae80fc62cddfe3309c800f72e1c07e
+PKG_VERSION:=f4bccc38f9d0a740aeb7818d33ca1fd551e325de
 PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=https://codeload.github.com/raspberrypi/userland/tar.gz/$(PKG_VERSION)?
-PKG_HASH:=f81fe28c636178645fb406cc87f543efa828ca896df856536f7b1b4ab54dfe0e
+PKG_HASH:=3a4ea8788809bf889da9fe61759e4f8daafab3444264c011db9c6b25237fd044
 
 PKG_FLAGS:=nonshared
 
@@ -51,10 +51,12 @@ define Package/bcm27xx-userland/install
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/dtmerge $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/dtparam $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/dtoverlay $(1)/usr/bin
+ifneq ($(ARCH),aarch64)
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/raspistill $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/raspivid $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/raspividyuv $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/raspiyuv $(1)/usr/bin
+endif
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/tvservice $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/vcgencmd $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/vcmailbox $(1)/usr/bin

package/utils/bcm27xx-userland/patches/0001-Revert-Add-MMAL-and-MMAL_APPS-to-64bit-builds.patch

@@ -0,0 +1,75 @@
+From 39c946b5dfcc38d3b2cd16d9c96f47a8341387cd Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
+Date: Thu, 28 May 2020 15:19:57 +0200
+Subject: [PATCH] Revert "Add MMAL and MMAL_APPS to 64bit builds"
+
+This reverts commit 7d3c6b9f4c3ddeecefdeb2b882bada74a235249b.
+---
+ CMakeLists.txt                         | 18 ++++++++++--------
+ host_applications/linux/CMakeLists.txt |  4 ++--
+ interface/mmal/CMakeLists.txt          |  6 ++----
+ 3 files changed, 14 insertions(+), 14 deletions(-)
+
+--- a/CMakeLists.txt
++++ b/CMakeLists.txt
+@@ -8,9 +8,13 @@ SET(PROJECT_VER_PATCH 0)
+ SET(PROJECT_VER "${PROJECT_VER_MAJOR}.${PROJECT_VER_MINOR}.${PROJECT_VER_PATCH}")
+ SET(PROJECT_APIVER "${PROJECT_VER}")
+ 
+-set(BUILD_MMAL TRUE)
+-set(BUILD_MMAL_APPS TRUE)
+-
++if(ARM64)
++   set(BUILD_MMAL FALSE)
++   set(BUILD_MMAL_APPS FALSE)
++else()
++   set(BUILD_MMAL TRUE)
++   set(BUILD_MMAL_APPS TRUE)
++endif()
+ set(vmcs_root ${PROJECT_SOURCE_DIR})
+ get_filename_component(VIDEOCORE_ROOT . ABSOLUTE)
+ 
+@@ -74,11 +78,9 @@ if(BUILD_MMAL)
+ endif()
+ 
+ # VidTex supports Android and Linux
+-if(NOT ARM64)
+-   if(BUILD_MMAL_APPS)
+-   add_subdirectory(host_applications/android/apps/vidtex)
+-   endif(BUILD_MMAL_APPS)
+-endif()
++if(BUILD_MMAL_APPS)
++add_subdirectory(host_applications/android/apps/vidtex)
++endif(BUILD_MMAL_APPS)
+ 
+ if(NOT ARM64)
+    add_subdirectory(middleware/openmaxil)
+--- a/host_applications/linux/CMakeLists.txt
++++ b/host_applications/linux/CMakeLists.txt
+@@ -4,9 +4,9 @@ add_subdirectory(libs/bcm_host)
+ add_subdirectory(apps/gencmd)
+ add_subdirectory(apps/tvservice)
+ add_subdirectory(apps/vcmailbox)
+-add_subdirectory(apps/raspicam)
+-add_subdirectory(libs/sm)
+ if(NOT ARM64)
++   add_subdirectory(apps/raspicam)
++   add_subdirectory(libs/sm)
+    add_subdirectory(apps/smem)
+ endif()
+ add_subdirectory(libs/debug_sym)
+--- a/interface/mmal/CMakeLists.txt
++++ b/interface/mmal/CMakeLists.txt
+@@ -11,10 +11,8 @@ add_subdirectory(core)
+ add_subdirectory(util)
+ add_subdirectory(vc)
+ add_subdirectory(components)
+-if(NOT ARM64)
+-   add_subdirectory(openmaxil)
+-   add_subdirectory(client)
+-endif()
++add_subdirectory(openmaxil)
++add_subdirectory(client)
+ 
+ target_link_libraries(mmal mmal_core mmal_util mmal_vc_client vcos mmal_components)
+ 

package/utils/fbtest/src/Makefile

@@ -11,4 +11,4 @@ fbtest: $(OBJS)
 	$(CC) -o $@ $(OBJS)
 
 clean:
-	rm -f rbcfg *.o
+	rm -f fbtest *.o

target/linux/ar71xx/image/mikrotik.mk

@@ -43,7 +43,7 @@ TARGET_DEVICES += nand-large-ac
 define Device/rb-nor-flash-16M
   $(Device/mikrotik)
   DEVICE_TITLE := MikroTik RouterBoard (16 MB SPI NOR)
-  DEVICE_PACKAGES := rbcfg rssileds -nand-utils kmod-ledtrig-gpio
+  DEVICE_PACKAGES := rssileds -nand-utils kmod-ledtrig-gpio
   IMAGE_SIZE := 16000k
   KERNEL_INSTALL := 1
   SUPPORTED_DEVICES := rb-750-r2 rb-750up-r2 rb-750p-pbr2 rb-911-2hn rb-911-5hn rb-931-2nd rb-941-2nd rb-951ui-2nd rb-952ui-5ac2nd rb-962uigs-5hact2hnt rb-lhg-5nd rb-map-2nd rb-mapl-2nd rb-wap-2nd rb-wapr-2nd rb-sxt-2nd-r3

target/linux/ath79/image/common-mikrotik.mk

@@ -1,6 +1,5 @@
 define Device/mikrotik
 	DEVICE_VENDOR := MikroTik
-	DEVICE_PACKAGES := rbcfg
 	LOADER_TYPE := elf
 	KERNEL := kernel-bin | append-dtb | lzma | loader-kernel
 	KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel

target/linux/bcm27xx/bcm2708/config-4.19

@@ -1,411 +0,0 @@
-# CONFIG_AIO is not set
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_BCM=y
-CONFIG_ARCH_BCM2835=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
-CONFIG_ARCH_HAS_PHYS_TO_DMA=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_BCM2835_CPUFREQ=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_ERRATA_411920=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_SCMI_PROTOCOL is not set
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_TIMER_SP804=y
-CONFIG_ARM_UNWIND=y
-CONFIG_AUTO_ZRELADDR=y
-# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BCM2708_VCMEM=y
-CONFIG_BCM2835_DEVGPIOMEM=y
-CONFIG_BCM2835_FAST_MEMCPY=y
-CONFIG_BCM2835_MBOX=y
-CONFIG_BCM2835_POWER=y
-# CONFIG_BCM2835_SMI is not set
-CONFIG_BCM2835_THERMAL=y
-CONFIG_BCM2835_TIMER=y
-CONFIG_BCM2835_VCHIQ=y
-# CONFIG_BCM2835_VCHIQ_MMAL is not set
-CONFIG_BCM2835_WDT=y
-CONFIG_BCM_VCIO=y
-CONFIG_BCM_VC_SM=y
-# CONFIG_BCM_VC_SM_CMA is not set
-CONFIG_BCM_VIDEOCORE=y
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_SCSI_REQUEST=y
-# CONFIG_BRCMSTB_THERMAL is not set
-CONFIG_BRCM_CHAR_DRIVERS=y
-CONFIG_BUILD_BIN2C=y
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-# CONFIG_CLK_RASPBERRYPI is not set
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=5
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_COMMON_CLK=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-# CONFIG_CPUFREQ_DT is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_ABRT_EV6=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_PM=y
-# CONFIG_CPU_THERMAL is not set
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_V6K=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-# CONFIG_DEBUG_USER is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_DMADEVICES=y
-CONFIG_DMA_BCM2708=y
-CONFIG_DMA_BCM2835=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-# CONFIG_F2FS_CHECK_FS is not set
-CONFIG_F2FS_FS=y
-# CONFIG_F2FS_FS_SECURITY is not set
-CONFIG_F2FS_FS_XATTR=y
-CONFIG_F2FS_STAT_FS=y
-CONFIG_FB=y
-CONFIG_FB_BCM2708=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-# CONFIG_FB_RPISENSE is not set
-CONFIG_FB_SIMPLE=y
-CONFIG_FIQ=y
-CONFIG_FIX_EARLYCON_MEM=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_FPE_NWFPE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FREEZER=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-# CONFIG_GPIO_BCM_VIRT is not set
-CONFIG_GPIO_RASPBERRYPI_EXP=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-# CONFIG_I2C_BCM2708 is not set
-CONFIG_I2C_BOARDINFO=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_INPUT=y
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_IOSCHED_CFQ=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_XZ is not set
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_INPUT=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MAILBOX=y
-# CONFIG_MAILBOX_TEST is not set
-CONFIG_MAX_RAW_DEVS=256
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_RPISENSE_CORE is not set
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BCM2835=y
-CONFIG_MMC_BCM2835_DMA=y
-CONFIG_MMC_BCM2835_MMC=y
-CONFIG_MMC_BCM2835_PIO_DMA_BARRIER=2
-CONFIG_MMC_BCM2835_SDHOST=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_MINORS=32
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD is not set
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NLS=y
-CONFIG_NLS_ASCII=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NVMEM=y
-CONFIG_OABI_COMPAT=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_CONFIGFS=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_NET=y
-CONFIG_OF_OVERLAY=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OF_RESOLVE=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_BCM2835=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
-CONFIG_PM_SLEEP=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PRINTK_TIME=y
-CONFIG_RASPBERRYPI_FIRMWARE=y
-CONFIG_RASPBERRYPI_POWER=y
-CONFIG_RATIONAL=y
-# CONFIG_RAVE_SP_CORE is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RESET_CONTROLLER=y
-# CONFIG_RPIVID_MEM is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_SERIAL_8250_BCM2835AUX=y
-# CONFIG_SERIAL_8250_DMA is not set
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=0
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_DEV_BUS=y
-# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SG_POOL=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SRCU=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_TEXTSEARCH is not set
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TINY_SRCU=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_UEVENT_HELPER_PATH=""
-# CONFIG_UID16 is not set
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_DWCOTG=y
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_NET_DRIVERS=y
-CONFIG_USB_NET_SMSC95XX=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_UAS=y
-CONFIG_USB_USBNET=y
-CONFIG_USE_OF=y
-CONFIG_VFP=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0

target/linux/bcm27xx/bcm2708/config-5.4

@@ -43,12 +43,14 @@ CONFIG_ARM_ERRATA_411920=y
 CONFIG_ARM_HAS_SG_CHAIN=y
 CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_ARM_PATCH_PHYS_VIRT=y
+# CONFIG_ARM_RASPBERRYPI_CPUFREQ is not set
 # CONFIG_ARM_SCMI_PROTOCOL is not set
 CONFIG_ARM_THUMB=y
 CONFIG_ARM_TIMER_SP804=y
 CONFIG_ARM_UNWIND=y
 CONFIG_AUTO_ZRELADDR=y
 CONFIG_BCM2708_VCMEM=y
+# CONFIG_BCM2711_THERMAL is not set
 CONFIG_BCM2835_DEVGPIOMEM=y
 CONFIG_BCM2835_FAST_MEMCPY=y
 CONFIG_BCM2835_MBOX=y
@@ -72,14 +74,13 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_PM=y
 CONFIG_BLK_SCSI_REQUEST=y
-# CONFIG_BRCMSTB_THERMAL is not set
 CONFIG_BRCM_CHAR_DRIVERS=y
 # CONFIG_CACHE_L2X0 is not set
 CONFIG_CC_HAS_KASAN_GENERIC=y
 CONFIG_CLKDEV_LOOKUP=y
 CONFIG_CLKSRC_MMIO=y
 CONFIG_CLK_BCM2835=y
-# CONFIG_CLK_RASPBERRYPI is not set
+CONFIG_CLK_RASPBERRYPI=y
 CONFIG_CLONE_BACKWARDS=y
 CONFIG_CMA=y
 CONFIG_CMA_ALIGNMENT=8
@@ -136,6 +137,9 @@ CONFIG_DCACHE_WORD_ACCESS=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+CONFIG_DMABUF_HEAPS=y
+CONFIG_DMABUF_HEAPS_CMA=y
+CONFIG_DMABUF_HEAPS_SYSTEM=y
 CONFIG_DMADEVICES=y
 CONFIG_DMA_BCM2708=y
 CONFIG_DMA_BCM2835=y
@@ -243,12 +247,15 @@ CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_HAVE_UID16=y
 CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
 CONFIG_HW_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_BCM2835=y
 CONFIG_HZ=100
 CONFIG_HZ_100=y
 CONFIG_HZ_FIXED=0
 CONFIG_I2C=y
 # CONFIG_I2C_BCM2708 is not set
 CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_BRCMSTB is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_INPUT=y
@@ -342,6 +349,7 @@ CONFIG_REGMAP_MMIO=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_RESET_CONTROLLER=y
+CONFIG_RESET_SIMPLE=y
 # CONFIG_RPIVID_MEM is not set
 CONFIG_SCSI=y
 # CONFIG_SCSI_LOWLEVEL is not set

target/linux/bcm27xx/bcm2709/config-4.19

@@ -1,525 +0,0 @@
-# CONFIG_AIO is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_ARCH_AXXIA is not set
-CONFIG_ARCH_BCM=y
-CONFIG_ARCH_BCM2835=y
-# CONFIG_ARCH_BCM_HR2 is not set
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
-CONFIG_ARCH_HAS_PHYS_TO_DMA=y
-CONFIG_ARCH_HAS_PTE_SPECIAL=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-# CONFIG_ARM_BCM2835_CPUFREQ is not set
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_LPAE=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_RASPBERRYPI_CPUFREQ=y
-# CONFIG_ARM_SCMI_PROTOCOL is not set
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_TIMER_SP804=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ASSOCIATIVE_ARRAY=y
-CONFIG_AUTO_ZRELADDR=y
-# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BCM2708_VCMEM=y
-CONFIG_BCM2835_DEVGPIOMEM=y
-CONFIG_BCM2835_MBOX=y
-CONFIG_BCM2835_POWER=y
-# CONFIG_BCM2835_SMI is not set
-CONFIG_BCM2835_THERMAL=y
-CONFIG_BCM2835_TIMER=y
-CONFIG_BCM2835_VCHIQ=y
-# CONFIG_BCM2835_VCHIQ_MMAL is not set
-CONFIG_BCM2835_WDT=y
-CONFIG_BCM7XXX_PHY=y
-CONFIG_BCMGENET=y
-CONFIG_BCM_NET_PHYLIB=y
-CONFIG_BCM_VCIO=y
-CONFIG_BCM_VC_SM=y
-# CONFIG_BCM_VC_SM_CMA is not set
-CONFIG_BCM_VIDEOCORE=y
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOUNCE=y
-CONFIG_BRCMSTB_THERMAL=y
-CONFIG_BRCM_CHAR_DRIVERS=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_BUILD_BIN2C=y
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLK_RASPBERRYPI=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=5
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_COMMON_CLK=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-# CONFIG_CPU_THERMAL is not set
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CTR=y
-CONFIG_CRYPTO_CTS=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CRYPTO_XTS=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-# CONFIG_DEBUG_USER is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_DMADEVICES=y
-CONFIG_DMA_BCM2708=y
-CONFIG_DMA_BCM2835=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_ENCRYPTION=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_ENCRYPTION=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-# CONFIG_F2FS_CHECK_FS is not set
-CONFIG_F2FS_FS=y
-# CONFIG_F2FS_FS_SECURITY is not set
-CONFIG_F2FS_FS_XATTR=y
-CONFIG_F2FS_STAT_FS=y
-CONFIG_FB=y
-CONFIG_FB_BCM2708=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-# CONFIG_FB_RPISENSE is not set
-CONFIG_FB_SIMPLE=y
-CONFIG_FIQ=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_FPE_NWFPE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FREEZER=y
-CONFIG_FS_ENCRYPTION=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_BCM_VIRT=y
-CONFIG_GPIO_RASPBERRYPI_EXP=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
-CONFIG_HAVE_ARM_SMCCC=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_GUP=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_RCU_TABLE_FREE=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HOTPLUG_CPU=y
-# CONFIG_HUGETLBFS is not set
-CONFIG_HW_CONSOLE=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-# CONFIG_I2C_BCM2708 is not set
-CONFIG_I2C_BOARDINFO=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_INPUT=y
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_IOSCHED_CFQ=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_KEYS=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_INPUT=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MAILBOX=y
-# CONFIG_MAILBOX_TEST is not set
-CONFIG_MAX_RAW_DEVS=256
-CONFIG_MDIO_BCM_UNIMAC=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_RPISENSE_CORE is not set
-CONFIG_MFD_SYSCON=y
-CONFIG_MICROCHIP_PHY=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BCM2835=y
-CONFIG_MMC_BCM2835_DMA=y
-CONFIG_MMC_BCM2835_MMC=y
-CONFIG_MMC_BCM2835_PIO_DMA_BARRIER=2
-CONFIG_MMC_BCM2835_SDHOST=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_MINORS=32
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-CONFIG_MMC_SDHCI_IPROC=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NLS=y
-CONFIG_NLS_ASCII=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-CONFIG_OABI_COMPAT=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_CONFIGFS=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_OVERLAY=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OF_RESOLVE=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_BRCMSTB=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYLIB=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_BCM2835=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
-CONFIG_PM_OPP=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PRINTK_TIME=y
-CONFIG_RAS=y
-CONFIG_RASPBERRYPI_FIRMWARE=y
-CONFIG_RASPBERRYPI_POWER=y
-CONFIG_RATIONAL=y
-# CONFIG_RAVE_SP_CORE is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-# CONFIG_RPIVID_MEM is not set
-CONFIG_RPS=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_SERIAL_8250_BCM2835AUX=y
-# CONFIG_SERIAL_8250_DMA is not set
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=0
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_DEV_BUS=y
-# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SRCU=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-# CONFIG_TEXTSEARCH is not set
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UEVENT_HELPER_PATH=""
-# CONFIG_UID16 is not set
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_DWCOTG=y
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_LAN78XX=y
-CONFIG_USB_NET_DRIVERS=y
-CONFIG_USB_NET_SMSC95XX=y
-CONFIG_USB_PCI=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_UAS=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_USB_USBNET=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_PCI=y
-CONFIG_USB_XHCI_PLATFORM=y
-CONFIG_USE_OF=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0

target/linux/bcm27xx/bcm2709/config-5.4

@@ -65,6 +65,7 @@ CONFIG_ARM_VIRT_EXT=y
 CONFIG_ASSOCIATIVE_ARRAY=y
 CONFIG_AUTO_ZRELADDR=y
 CONFIG_BCM2708_VCMEM=y
+CONFIG_BCM2711_THERMAL=y
 CONFIG_BCM2835_DEVGPIOMEM=y
 CONFIG_BCM2835_MBOX=y
 CONFIG_BCM2835_POWER=y
@@ -92,7 +93,6 @@ CONFIG_BLK_MQ_PCI=y
 CONFIG_BLK_PM=y
 CONFIG_BLK_SCSI_REQUEST=y
 CONFIG_BOUNCE=y
-CONFIG_BRCMSTB_THERMAL=y
 CONFIG_BRCM_CHAR_DRIVERS=y
 CONFIG_BROADCOM_PHY=y
 # CONFIG_CACHE_L2X0 is not set
@@ -183,6 +183,9 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
 CONFIG_DIMLIB=y
+CONFIG_DMABUF_HEAPS=y
+CONFIG_DMABUF_HEAPS_CMA=y
+CONFIG_DMABUF_HEAPS_SYSTEM=y
 CONFIG_DMADEVICES=y
 CONFIG_DMA_BCM2708=y
 CONFIG_DMA_BCM2835=y
@@ -311,12 +314,15 @@ CONFIG_HIGHMEM=y
 CONFIG_HIGHPTE=y
 CONFIG_HOTPLUG_CPU=y
 CONFIG_HW_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_BCM2835=y
 CONFIG_HZ=100
 CONFIG_HZ_100=y
 CONFIG_HZ_FIXED=0
 CONFIG_I2C=y
 # CONFIG_I2C_BCM2708 is not set
 CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_BRCMSTB is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_INPUT=y
@@ -441,6 +447,7 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_RESET_CONTROLLER=y
+CONFIG_RESET_SIMPLE=y
 CONFIG_RFS_ACCEL=y
 # CONFIG_RPIVID_MEM is not set
 CONFIG_RPS=y

target/linux/bcm27xx/bcm2710/config-4.19

@@ -1,576 +0,0 @@
-CONFIG_64BIT=y
-# CONFIG_AIO is not set
-CONFIG_ARCH_BCM2835=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
-CONFIG_ARCH_HAS_PTE_SPECIAL=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_INLINE_READ_LOCK=y
-CONFIG_ARCH_INLINE_READ_LOCK_BH=y
-CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_READ_UNLOCK=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_INLINE_SPIN_LOCK=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y
-CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_INLINE_WRITE_LOCK=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_INT128=y
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
-CONFIG_ARM64=y
-# CONFIG_ARM64_16K_PAGES is not set
-CONFIG_ARM64_4K_PAGES=y
-# CONFIG_ARM64_64K_PAGES is not set
-CONFIG_ARM64_CONT_SHIFT=4
-# CONFIG_ARM64_CRYPTO is not set
-CONFIG_ARM64_ERRATUM_819472=y
-CONFIG_ARM64_ERRATUM_824069=y
-CONFIG_ARM64_ERRATUM_826319=y
-CONFIG_ARM64_ERRATUM_827319=y
-CONFIG_ARM64_ERRATUM_832075=y
-CONFIG_ARM64_ERRATUM_843419=y
-CONFIG_ARM64_HW_AFDBM=y
-# CONFIG_ARM64_LSE_ATOMICS is not set
-CONFIG_ARM64_MODULE_PLTS=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PAN=y
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-# CONFIG_ARM64_PMEM is not set
-# CONFIG_ARM64_PTDUMP_DEBUGFS is not set
-# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
-CONFIG_ARM64_SSBD=y
-CONFIG_ARM64_SVE=y
-CONFIG_ARM64_UAO=y
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-# CONFIG_ARM64_VA_BITS_48 is not set
-CONFIG_ARM64_VHE=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
-# CONFIG_ARM_BCM2835_CPUFREQ is not set
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-CONFIG_ARM_PSCI_FW=y
-CONFIG_ARM_RASPBERRYPI_CPUFREQ=y
-# CONFIG_ARM_SCMI_PROTOCOL is not set
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_ARM_TIMER_SP804=y
-CONFIG_ASSOCIATIVE_ARRAY=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BCM2708_VCMEM=y
-CONFIG_BCM2835_DEVGPIOMEM=y
-CONFIG_BCM2835_MBOX=y
-CONFIG_BCM2835_POWER=y
-# CONFIG_BCM2835_SMI is not set
-CONFIG_BCM2835_THERMAL=y
-CONFIG_BCM2835_VCHIQ=y
-# CONFIG_BCM2835_VCHIQ_MMAL is not set
-CONFIG_BCM2835_WDT=y
-CONFIG_BCM_VCIO=y
-# CONFIG_BCM_VC_SM is not set
-# CONFIG_BCM_VC_SM_CMA is not set
-CONFIG_BCM_VIDEOCORE=y
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BRCMSTB_THERMAL=y
-CONFIG_BRCM_CHAR_DRIVERS=y
-CONFIG_BUILD_BIN2C=y
-CONFIG_CAVIUM_ERRATUM_22375=y
-CONFIG_CAVIUM_ERRATUM_23154=y
-CONFIG_CAVIUM_ERRATUM_27456=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLK_RASPBERRYPI=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=5
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_XGENE=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-# CONFIG_CPU_THERMAL is not set
-CONFIG_CRC16=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CTR=y
-CONFIG_CRYPTO_CTS=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CRYPTO_XTS=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_DMADEVICES=y
-CONFIG_DMA_BCM2708=y
-CONFIG_DMA_BCM2835=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_DIRECT_OPS=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_ENCRYPTION=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_ENCRYPTION=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-# CONFIG_F2FS_CHECK_FS is not set
-CONFIG_F2FS_FS=y
-# CONFIG_F2FS_FS_SECURITY is not set
-CONFIG_F2FS_FS_XATTR=y
-CONFIG_F2FS_STAT_FS=y
-CONFIG_FB=y
-CONFIG_FB_BCM2708=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-# CONFIG_FB_RPISENSE is not set
-CONFIG_FB_SIMPLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FREEZER=y
-CONFIG_FSL_ERRATUM_A008585=y
-CONFIG_FS_ENCRYPTION=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_BCM_VIRT=y
-CONFIG_GPIO_RASPBERRYPI_EXP=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_HUGE_VMAP=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KASAN=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_ARCH_VMAP_STACK=y
-CONFIG_HAVE_ARM_SMCCC=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CMPXCHG_DOUBLE=y
-CONFIG_HAVE_CMPXCHG_LOCAL=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_BUGVERBOSE=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_GUP=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_PATA_PLATFORM=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_RCU_TABLE_FREE=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_HOTPLUG_CPU=y
-# CONFIG_HUGETLBFS is not set
-CONFIG_HW_CONSOLE=y
-CONFIG_I2C=y
-# CONFIG_I2C_BCM2708 is not set
-CONFIG_I2C_BOARDINFO=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_INLINE_READ_LOCK=y
-CONFIG_INLINE_READ_LOCK_BH=y
-CONFIG_INLINE_READ_LOCK_IRQ=y
-CONFIG_INLINE_READ_LOCK_IRQSAVE=y
-CONFIG_INLINE_READ_UNLOCK_BH=y
-CONFIG_INLINE_READ_UNLOCK_IRQRESTORE=y
-CONFIG_INLINE_SPIN_LOCK=y
-CONFIG_INLINE_SPIN_LOCK_BH=y
-CONFIG_INLINE_SPIN_LOCK_IRQ=y
-CONFIG_INLINE_SPIN_LOCK_IRQSAVE=y
-CONFIG_INLINE_SPIN_TRYLOCK=y
-CONFIG_INLINE_SPIN_TRYLOCK_BH=y
-CONFIG_INLINE_SPIN_UNLOCK_BH=y
-CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE=y
-CONFIG_INLINE_WRITE_LOCK=y
-CONFIG_INLINE_WRITE_LOCK_BH=y
-CONFIG_INLINE_WRITE_LOCK_IRQ=y
-CONFIG_INLINE_WRITE_LOCK_IRQSAVE=y
-CONFIG_INLINE_WRITE_UNLOCK_BH=y
-CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE=y
-CONFIG_INPUT=y
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_IOSCHED_CFQ=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_KEYS=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_INPUT=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MAILBOX=y
-# CONFIG_MAILBOX_TEST is not set
-CONFIG_MAX_RAW_DEVS=256
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_RPISENSE_CORE is not set
-CONFIG_MFD_SYSCON=y
-CONFIG_MICROCHIP_PHY=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BCM2835=y
-CONFIG_MMC_BCM2835_DMA=y
-CONFIG_MMC_BCM2835_MMC=y
-CONFIG_MMC_BCM2835_PIO_DMA_BARRIER=2
-CONFIG_MMC_BCM2835_SDHOST=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_MINORS=32
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-CONFIG_MMC_SDHCI_IPROC=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MTD is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NLS=y
-CONFIG_NLS_ASCII=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=4
-# CONFIG_NUMA is not set
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_CONFIGFS=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_OVERLAY=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OF_RESOLVE=y
-CONFIG_PADATA=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCI=y
-# CONFIG_PCIE_BRCMSTB is not set
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYLIB=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_BCM2835=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
-CONFIG_PM_OPP=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PRINTK_TIME=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-# CONFIG_RANDOMIZE_BASE is not set
-CONFIG_RASPBERRYPI_FIRMWARE=y
-CONFIG_RASPBERRYPI_POWER=y
-CONFIG_RATIONAL=y
-# CONFIG_RAVE_SP_CORE is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-# CONFIG_RPIVID_MEM is not set
-CONFIG_RPS=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_SERIAL_8250_BCM2835AUX=y
-# CONFIG_SERIAL_8250_DMA is not set
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=0
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_DEV_BUS=y
-# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SRCU=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-# CONFIG_TEXTSEARCH is not set
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-CONFIG_THERMAL_WRITABLE_TRIPS=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UEVENT_HELPER_PATH=""
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_DWCOTG=y
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_LAN78XX=y
-CONFIG_USB_NET_DRIVERS=y
-CONFIG_USB_NET_SMSC95XX=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_UAS=y
-CONFIG_USB_USBNET=y
-CONFIG_VMAP_STACK=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZONE_DMA32=y

target/linux/bcm27xx/bcm2710/config-5.4

@@ -125,6 +125,7 @@ CONFIG_ARM_TIMER_SP804=y
 CONFIG_ASSOCIATIVE_ARRAY=y
 CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
 CONFIG_BCM2708_VCMEM=y
+# CONFIG_BCM2711_THERMAL is not set
 CONFIG_BCM2835_DEVGPIOMEM=y
 CONFIG_BCM2835_MBOX=y
 CONFIG_BCM2835_POWER=y
@@ -147,7 +148,6 @@ CONFIG_BLK_MQ_PCI=y
 CONFIG_BLK_PM=y
 CONFIG_BLK_SCSI_REQUEST=y
 CONFIG_BOUNCE=y
-CONFIG_BRCMSTB_THERMAL=y
 CONFIG_BRCM_CHAR_DRIVERS=y
 CONFIG_CAVIUM_ERRATUM_22375=y
 CONFIG_CAVIUM_ERRATUM_23154=y
@@ -224,6 +224,9 @@ CONFIG_CRYPTO_XTS=y
 CONFIG_DCACHE_WORD_ACCESS=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
+CONFIG_DMABUF_HEAPS=y
+CONFIG_DMABUF_HEAPS_CMA=y
+CONFIG_DMABUF_HEAPS_SYSTEM=y
 CONFIG_DMADEVICES=y
 CONFIG_DMA_BCM2708=y
 CONFIG_DMA_BCM2835=y
@@ -232,6 +235,7 @@ CONFIG_DMA_DIRECT_REMAP=y
 CONFIG_DMA_ENGINE=y
 CONFIG_DMA_OF=y
 CONFIG_DMA_REMAP=y
+CONFIG_DMA_SHARED_BUFFER=y
 CONFIG_DMA_VIRTUAL_CHANNELS=y
 CONFIG_DNOTIFY=y
 CONFIG_DRM_RCAR_WRITEBACK=y
@@ -367,11 +371,14 @@ CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
 CONFIG_HOLES_IN_ZONE=y
 CONFIG_HOTPLUG_CPU=y
 CONFIG_HW_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_BCM2835=y
 CONFIG_HZ=250
 CONFIG_HZ_250=y
 CONFIG_I2C=y
 # CONFIG_I2C_BCM2708 is not set
 CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_BRCMSTB is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
@@ -513,6 +520,7 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_RESET_CONTROLLER=y
+CONFIG_RESET_SIMPLE=y
 CONFIG_RFS_ACCEL=y
 CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
 # CONFIG_RPIVID_MEM is not set

target/linux/bcm27xx/bcm2711/config-4.19

@@ -1,586 +0,0 @@
-CONFIG_64BIT=y
-# CONFIG_AIO is not set
-CONFIG_ARCH_BCM2835=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
-CONFIG_ARCH_HAS_PTE_SPECIAL=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_INLINE_READ_LOCK=y
-CONFIG_ARCH_INLINE_READ_LOCK_BH=y
-CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_READ_UNLOCK=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_INLINE_SPIN_LOCK=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y
-CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_INLINE_WRITE_LOCK=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_INT128=y
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
-CONFIG_ARM64=y
-# CONFIG_ARM64_16K_PAGES is not set
-CONFIG_ARM64_4K_PAGES=y
-# CONFIG_ARM64_64K_PAGES is not set
-CONFIG_ARM64_CONT_SHIFT=4
-# CONFIG_ARM64_CRYPTO is not set
-CONFIG_ARM64_ERRATUM_819472=y
-CONFIG_ARM64_ERRATUM_824069=y
-CONFIG_ARM64_ERRATUM_826319=y
-CONFIG_ARM64_ERRATUM_827319=y
-CONFIG_ARM64_ERRATUM_832075=y
-CONFIG_ARM64_ERRATUM_843419=y
-CONFIG_ARM64_HW_AFDBM=y
-# CONFIG_ARM64_LSE_ATOMICS is not set
-CONFIG_ARM64_MODULE_PLTS=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PAN=y
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-# CONFIG_ARM64_PMEM is not set
-# CONFIG_ARM64_PTDUMP_DEBUGFS is not set
-# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
-CONFIG_ARM64_SSBD=y
-CONFIG_ARM64_SVE=y
-CONFIG_ARM64_UAO=y
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-# CONFIG_ARM64_VA_BITS_48 is not set
-CONFIG_ARM64_VHE=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
-# CONFIG_ARM_BCM2835_CPUFREQ is not set
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-CONFIG_ARM_PSCI_FW=y
-CONFIG_ARM_RASPBERRYPI_CPUFREQ=y
-# CONFIG_ARM_SCMI_PROTOCOL is not set
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_ARM_TIMER_SP804=y
-CONFIG_ASSOCIATIVE_ARRAY=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BCM2708_VCMEM=y
-CONFIG_BCM2835_DEVGPIOMEM=y
-CONFIG_BCM2835_MBOX=y
-CONFIG_BCM2835_POWER=y
-# CONFIG_BCM2835_SMI is not set
-# CONFIG_BCM2835_THERMAL is not set
-CONFIG_BCM2835_VCHIQ=y
-# CONFIG_BCM2835_VCHIQ_MMAL is not set
-CONFIG_BCM2835_WDT=y
-CONFIG_BCM7XXX_PHY=y
-CONFIG_BCMGENET=y
-CONFIG_BCM_NET_PHYLIB=y
-CONFIG_BCM_VCIO=y
-# CONFIG_BCM_VC_SM is not set
-# CONFIG_BCM_VC_SM_CMA is not set
-CONFIG_BCM_VIDEOCORE=y
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BRCMSTB_THERMAL=y
-CONFIG_BRCM_CHAR_DRIVERS=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_BUILD_BIN2C=y
-CONFIG_CAVIUM_ERRATUM_22375=y
-CONFIG_CAVIUM_ERRATUM_23154=y
-CONFIG_CAVIUM_ERRATUM_27456=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLK_RASPBERRYPI=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=5
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_XGENE=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-# CONFIG_CPU_THERMAL is not set
-CONFIG_CRC16=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CTR=y
-CONFIG_CRYPTO_CTS=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CRYPTO_XTS=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_DMADEVICES=y
-CONFIG_DMA_BCM2708=y
-CONFIG_DMA_BCM2835=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_DIRECT_OPS=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_ENCRYPTION=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_ENCRYPTION=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-# CONFIG_F2FS_CHECK_FS is not set
-CONFIG_F2FS_FS=y
-# CONFIG_F2FS_FS_SECURITY is not set
-CONFIG_F2FS_FS_XATTR=y
-CONFIG_F2FS_STAT_FS=y
-CONFIG_FB=y
-CONFIG_FB_BCM2708=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-# CONFIG_FB_RPISENSE is not set
-CONFIG_FB_SIMPLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FREEZER=y
-CONFIG_FSL_ERRATUM_A008585=y
-CONFIG_FS_ENCRYPTION=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_BCM_VIRT=y
-CONFIG_GPIO_RASPBERRYPI_EXP=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_HUGE_VMAP=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KASAN=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_ARCH_VMAP_STACK=y
-CONFIG_HAVE_ARM_SMCCC=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CMPXCHG_DOUBLE=y
-CONFIG_HAVE_CMPXCHG_LOCAL=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_BUGVERBOSE=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_GUP=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_PATA_PLATFORM=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_RCU_TABLE_FREE=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_HOTPLUG_CPU=y
-# CONFIG_HUGETLBFS is not set
-CONFIG_HW_CONSOLE=y
-CONFIG_I2C=y
-# CONFIG_I2C_BCM2708 is not set
-CONFIG_I2C_BOARDINFO=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_INLINE_READ_LOCK=y
-CONFIG_INLINE_READ_LOCK_BH=y
-CONFIG_INLINE_READ_LOCK_IRQ=y
-CONFIG_INLINE_READ_LOCK_IRQSAVE=y
-CONFIG_INLINE_READ_UNLOCK_BH=y
-CONFIG_INLINE_READ_UNLOCK_IRQRESTORE=y
-CONFIG_INLINE_SPIN_LOCK=y
-CONFIG_INLINE_SPIN_LOCK_BH=y
-CONFIG_INLINE_SPIN_LOCK_IRQ=y
-CONFIG_INLINE_SPIN_LOCK_IRQSAVE=y
-CONFIG_INLINE_SPIN_TRYLOCK=y
-CONFIG_INLINE_SPIN_TRYLOCK_BH=y
-CONFIG_INLINE_SPIN_UNLOCK_BH=y
-CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE=y
-CONFIG_INLINE_WRITE_LOCK=y
-CONFIG_INLINE_WRITE_LOCK_BH=y
-CONFIG_INLINE_WRITE_LOCK_IRQ=y
-CONFIG_INLINE_WRITE_LOCK_IRQSAVE=y
-CONFIG_INLINE_WRITE_UNLOCK_BH=y
-CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE=y
-CONFIG_INPUT=y
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_IOSCHED_CFQ=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_KEYS=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_INPUT=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MAILBOX=y
-# CONFIG_MAILBOX_TEST is not set
-CONFIG_MAX_RAW_DEVS=256
-CONFIG_MDIO_BCM_UNIMAC=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_RPISENSE_CORE is not set
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BCM2835=y
-CONFIG_MMC_BCM2835_DMA=y
-CONFIG_MMC_BCM2835_MMC=y
-CONFIG_MMC_BCM2835_PIO_DMA_BARRIER=2
-CONFIG_MMC_BCM2835_SDHOST=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_MINORS=32
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-CONFIG_MMC_SDHCI_IPROC=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MTD is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NLS=y
-CONFIG_NLS_ASCII=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=4
-# CONFIG_NUMA is not set
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_CONFIGFS=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_OVERLAY=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OF_RESOLVE=y
-CONFIG_PADATA=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_BRCMSTB=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYLIB=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_BCM2835=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
-CONFIG_PM_OPP=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PRINTK_TIME=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-# CONFIG_RANDOMIZE_BASE is not set
-CONFIG_RAS=y
-CONFIG_RASPBERRYPI_FIRMWARE=y
-CONFIG_RASPBERRYPI_POWER=y
-CONFIG_RATIONAL=y
-# CONFIG_RAVE_SP_CORE is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-# CONFIG_RPIVID_MEM is not set
-CONFIG_RPS=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_SERIAL_8250_BCM2835AUX=y
-# CONFIG_SERIAL_8250_DMA is not set
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=0
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_DEV_BUS=y
-# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SRCU=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-# CONFIG_TEXTSEARCH is not set
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-CONFIG_THERMAL_WRITABLE_TRIPS=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UEVENT_HELPER_PATH=""
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_DWCOTG=y
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_PCI=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_UAS=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_PCI=y
-CONFIG_USB_XHCI_PLATFORM=y
-CONFIG_VMAP_STACK=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZONE_DMA32=y

target/linux/bcm27xx/bcm2711/config-5.4

@@ -125,6 +125,7 @@ CONFIG_ARM_TIMER_SP804=y
 CONFIG_ASSOCIATIVE_ARRAY=y
 CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
 CONFIG_BCM2708_VCMEM=y
+CONFIG_BCM2711_THERMAL=y
 CONFIG_BCM2835_DEVGPIOMEM=y
 CONFIG_BCM2835_MBOX=y
 CONFIG_BCM2835_POWER=y
@@ -150,7 +151,6 @@ CONFIG_BLK_MQ_PCI=y
 CONFIG_BLK_PM=y
 CONFIG_BLK_SCSI_REQUEST=y
 CONFIG_BOUNCE=y
-CONFIG_BRCMSTB_THERMAL=y
 CONFIG_BRCM_CHAR_DRIVERS=y
 CONFIG_BROADCOM_PHY=y
 CONFIG_CAVIUM_ERRATUM_22375=y
@@ -229,6 +229,9 @@ CONFIG_DCACHE_WORD_ACCESS=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DIMLIB=y
+CONFIG_DMABUF_HEAPS=y
+CONFIG_DMABUF_HEAPS_CMA=y
+CONFIG_DMABUF_HEAPS_SYSTEM=y
 CONFIG_DMADEVICES=y
 CONFIG_DMA_BCM2708=y
 CONFIG_DMA_BCM2835=y
@@ -237,6 +240,7 @@ CONFIG_DMA_DIRECT_REMAP=y
 CONFIG_DMA_ENGINE=y
 CONFIG_DMA_OF=y
 CONFIG_DMA_REMAP=y
+CONFIG_DMA_SHARED_BUFFER=y
 CONFIG_DMA_VIRTUAL_CHANNELS=y
 CONFIG_DNOTIFY=y
 CONFIG_DRM_RCAR_WRITEBACK=y
@@ -373,11 +377,14 @@ CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
 CONFIG_HOLES_IN_ZONE=y
 CONFIG_HOTPLUG_CPU=y
 CONFIG_HW_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_BCM2835=y
 CONFIG_HZ=250
 CONFIG_HZ_250=y
 CONFIG_I2C=y
 # CONFIG_I2C_BCM2708 is not set
 CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_BRCMSTB is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
@@ -523,6 +530,7 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_RESET_CONTROLLER=y
+CONFIG_RESET_SIMPLE=y
 CONFIG_RFS_ACCEL=y
 CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
 # CONFIG_RPIVID_MEM is not set

target/linux/bcm27xx/modules/other.mk

@@ -23,23 +23,6 @@ endef
 $(eval $(call KernelPackage,pwm-bcm2835))
 
 
-define KernelPackage/random-bcm2835
-  SUBMENU:=$(OTHER_MENU)
-  TITLE:=BCM2835 HW Random Number Generator
-  KCONFIG:= \
-    CONFIG_HW_RANDOM_BCM2835
-  FILES:=$(LINUX_DIR)/drivers/char/hw_random/bcm2835-rng.ko
-  AUTOLOAD:=$(call AutoLoad,11,bcm2835-rng)
-  DEPENDS:=@TARGET_bcm27xx +kmod-random-core
-endef
-
-define KernelPackage/random-bcm2835/description
-  This package contains the Broadcom 2835 HW random number generator driver
-endef
-
-$(eval $(call KernelPackage,random-bcm2835))
-
-
 define KernelPackage/smi-bcm2835
   SUBMENU:=$(OTHER_MENU)
   TITLE:=BCM2835 SMI driver

target/linux/bcm27xx/modules/sound.mk

@@ -268,6 +268,33 @@ endef
 $(eval $(call KernelPackage,sound-soc-allo-katana-codec))
 
 
+define KernelPackage/sound-soc-audioinjector-isolated-soundcard
+  TITLE:=Support for AudioInjector Isolated soundcard
+  KCONFIG:= \
+    CONFIG_SND_AUDIOINJECTOR_ISOLATED_SOUNDCARD \
+    CONFIG_SND_SOC_CS4271 \
+    CONFIG_SND_SOC_CS4271_I2C
+  FILES:= \
+    $(LINUX_DIR)/sound/soc/bcm/snd-soc-audioinjector-isolated-soundcard.ko \
+    $(LINUX_DIR)/sound/soc/codecs/snd-soc-wm8731.ko
+  AUTOLOAD:=$(call AutoLoad,68,snd-soc-cs4271.o \
+    snd-soc-cs4271-i2c \
+    snd-soc-audioinjector-isolated-soundcard)
+  DEPENDS:= \
+    kmod-sound-soc-bcm2835-i2s \
+    +kmod-i2c-bcm2835 \
+    +kmod-regmap-i2c \
+    +kmod-regmap-spi
+  $(call AddDepends/sound)
+endef
+
+define KernelPackage/sound-soc-audioinjector-isolated-soundcard/description
+  This package contains support for AudioInjector Isolated soundcard
+endef
+
+$(eval $(call KernelPackage,sound-soc-audioinjector-isolated-soundcard))
+
+
 define KernelPackage/sound-soc-audioinjector-octo-soundcard
   TITLE:=Support for AudioInjector Octo soundcard
   KCONFIG:= \
@@ -884,6 +911,28 @@ endef
 $(eval $(call KernelPackage,sound-soc-rpi-dac))
 
 
+define KernelPackage/sound-soc-merus-amp
+  TITLE:=Support for Infineon Merus Amp
+  KCONFIG:= \
+    CONFIG_SND_SOC_MA120X0P
+  FILES:= \
+    $(LINUX_DIR)/sound/soc/codecs/snd-soc-ma120x0p.ko
+  AUTOLOAD:=$(call AutoLoad,68,snd-soc-ma120x0p)
+  DEPENDS:= \
+    kmod-sound-soc-bcm2835-i2s \
+    +kmod-sound-soc-rpi-simple-soundcard \
+    +kmod-i2c-bcm2835 \
+    +kmod-regmap-i2c
+  $(call AddDepends/sound)
+endef
+
+define KernelPackage/sound-soc-merus-amp/description
+  This package contains support for Infineon Merus Amp
+endef
+
+$(eval $(call KernelPackage,sound-soc-merus-amp))
+
+
 define KernelPackage/sound-soc-rpi-proto
   TITLE:=Support for RPi-PROTO
   KCONFIG:= \

target/linux/bcm27xx/modules/video.mk

@@ -33,12 +33,13 @@ define KernelPackage/drm-vc4
     +kmod-sound-soc-core
   KCONFIG:= \
     CONFIG_DRM_VC4 \
-    CONFIG_DRM_VC4_HDMI_CEC=n \
+    CONFIG_DRM_VC4_HDMI_CEC=y \
     CONFIG_DRM_V3D=n \
     CONFIG_DRM_TVE200=n
   FILES:= \
     $(LINUX_DIR)/drivers/gpu/drm/vc4/vc4.ko \
-    $(LINUX_DIR)/drivers/gpu/drm/drm_kms_helper.ko
+    $(LINUX_DIR)/drivers/gpu/drm/drm_kms_helper.ko \
+    $(LINUX_DIR)/drivers/media/cec/cec.ko
   AUTOLOAD:=$(call AutoProbe,vc4)
 endef
 

target/linux/bcm27xx/patches-4.19/950-0001-arm-partially-revert-702b94bff3c50542a6e4ab9a4f4cef0.patch

@@ -1,99 +0,0 @@
-From 2096cda971fed28cbc822d8c7d489bf85af22f34 Mon Sep 17 00:00:00 2001
-From: Dan Pasanen <dan.pasanen@gmail.com>
-Date: Thu, 21 Sep 2017 09:55:42 -0500
-Subject: [PATCH] arm: partially revert
- 702b94bff3c50542a6e4ab9a4f4cef093262fe65
-
-* Re-expose some dmi APIs for use in VCSM
----
- arch/arm/include/asm/cacheflush.h | 21 +++++++++++++++++++++
- arch/arm/include/asm/glue-cache.h |  2 ++
- arch/arm/mm/proc-macros.S         |  2 ++
- arch/arm/mm/proc-syms.c           |  3 +++
- 4 files changed, 28 insertions(+)
-
---- a/arch/arm/include/asm/cacheflush.h
-+++ b/arch/arm/include/asm/cacheflush.h
-@@ -94,6 +94,21 @@
-  *	DMA Cache Coherency
-  *	===================
-  *
-+ *	dma_inv_range(start, end)
-+ *
-+ *		Invalidate (discard) the specified virtual address range.
-+ *		May not write back any entries.  If 'start' or 'end'
-+ *		are not cache line aligned, those lines must be written
-+ *		back.
-+ *		- start  - virtual start address
-+ *		- end    - virtual end address
-+ *
-+ *	dma_clean_range(start, end)
-+ *
-+ *		Clean (write back) the specified virtual address range.
-+ *		- start  - virtual start address
-+ *		- end    - virtual end address
-+ *
-  *	dma_flush_range(start, end)
-  *
-  *		Clean and invalidate the specified virtual address range.
-@@ -115,6 +130,8 @@ struct cpu_cache_fns {
- 	void (*dma_map_area)(const void *, size_t, int);
- 	void (*dma_unmap_area)(const void *, size_t, int);
- 
-+	void (*dma_inv_range)(const void *, const void *);
-+	void (*dma_clean_range)(const void *, const void *);
- 	void (*dma_flush_range)(const void *, const void *);
- } __no_randomize_layout;
- 
-@@ -140,6 +157,8 @@ extern struct cpu_cache_fns cpu_cache;
-  * is visible to DMA, or data written by DMA to system memory is
-  * visible to the CPU.
-  */
-+#define dmac_inv_range			cpu_cache.dma_inv_range
-+#define dmac_clean_range		cpu_cache.dma_clean_range
- #define dmac_flush_range		cpu_cache.dma_flush_range
- 
- #else
-@@ -159,6 +178,8 @@ extern void __cpuc_flush_dcache_area(voi
-  * is visible to DMA, or data written by DMA to system memory is
-  * visible to the CPU.
-  */
-+extern void dmac_inv_range(const void *, const void *);
-+extern void dmac_clean_range(const void *, const void *);
- extern void dmac_flush_range(const void *, const void *);
- 
- #endif
---- a/arch/arm/include/asm/glue-cache.h
-+++ b/arch/arm/include/asm/glue-cache.h
-@@ -158,6 +158,8 @@ static inline void nop_dma_unmap_area(co
- #define __cpuc_coherent_user_range	__glue(_CACHE,_coherent_user_range)
- #define __cpuc_flush_dcache_area	__glue(_CACHE,_flush_kern_dcache_area)
- 
-+#define dmac_inv_range			__glue(_CACHE,_dma_inv_range)
-+#define dmac_clean_range		__glue(_CACHE,_dma_clean_range)
- #define dmac_flush_range		__glue(_CACHE,_dma_flush_range)
- #endif
- 
---- a/arch/arm/mm/proc-macros.S
-+++ b/arch/arm/mm/proc-macros.S
-@@ -335,6 +335,8 @@ ENTRY(\name\()_cache_fns)
- 	.long	\name\()_flush_kern_dcache_area
- 	.long	\name\()_dma_map_area
- 	.long	\name\()_dma_unmap_area
-+	.long	\name\()_dma_inv_range
-+	.long	\name\()_dma_clean_range
- 	.long	\name\()_dma_flush_range
- 	.size	\name\()_cache_fns, . - \name\()_cache_fns
- .endm
---- a/arch/arm/mm/proc-syms.c
-+++ b/arch/arm/mm/proc-syms.c
-@@ -30,6 +30,9 @@ EXPORT_SYMBOL(__cpuc_flush_user_all);
- EXPORT_SYMBOL(__cpuc_flush_user_range);
- EXPORT_SYMBOL(__cpuc_coherent_kern_range);
- EXPORT_SYMBOL(__cpuc_flush_dcache_area);
-+EXPORT_SYMBOL(dmac_inv_range);
-+EXPORT_SYMBOL(dmac_clean_range);
-+EXPORT_SYMBOL(dmac_flush_range);
- #else
- EXPORT_SYMBOL(cpu_cache);
- #endif

target/linux/bcm27xx/patches-4.19/950-0002-smsx95xx-fix-crimes-against-truesize.patch

@@ -1,47 +0,0 @@
-From 26bb49317b44d0927ed7b4be1d72aa11853a01f7 Mon Sep 17 00:00:00 2001
-From: Steve Glendinning <steve.glendinning@smsc.com>
-Date: Thu, 19 Feb 2015 18:47:12 +0000
-Subject: [PATCH] smsx95xx: fix crimes against truesize
-
-smsc95xx is adjusting truesize when it shouldn't, and following a recent patch from Eric this is now triggering warnings.
-
-This patch stops smsc95xx from changing truesize.
-
-Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
----
- drivers/net/usb/smsc95xx.c | 10 ++++++++--
- 1 file changed, 8 insertions(+), 2 deletions(-)
-
---- a/drivers/net/usb/smsc95xx.c
-+++ b/drivers/net/usb/smsc95xx.c
-@@ -82,6 +82,10 @@ static bool turbo_mode = true;
- module_param(turbo_mode, bool, 0644);
- MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
- 
-+static bool truesize_mode = false;
-+module_param(truesize_mode, bool, 0644);
-+MODULE_PARM_DESC(truesize_mode, "Report larger truesize value");
-+
- static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index,
- 					    u32 *data, int in_pm)
- {
-@@ -1972,7 +1976,8 @@ static int smsc95xx_rx_fixup(struct usbn
- 				if (dev->net->features & NETIF_F_RXCSUM)
- 					smsc95xx_rx_csum_offload(skb);
- 				skb_trim(skb, skb->len - 4); /* remove fcs */
--				skb->truesize = size + sizeof(struct sk_buff);
-+				if (truesize_mode)
-+					skb->truesize = size + sizeof(struct sk_buff);
- 
- 				return 1;
- 			}
-@@ -1990,7 +1995,8 @@ static int smsc95xx_rx_fixup(struct usbn
- 			if (dev->net->features & NETIF_F_RXCSUM)
- 				smsc95xx_rx_csum_offload(ax_skb);
- 			skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */
--			ax_skb->truesize = size + sizeof(struct sk_buff);
-+			if (truesize_mode)
-+				ax_skb->truesize = size + sizeof(struct sk_buff);
- 
- 			usbnet_skb_return(dev, ax_skb);
- 		}

target/linux/bcm27xx/patches-4.19/950-0003-smsc95xx-Experimental-Enable-turbo_mode-and-packetsi.patch

@@ -1,43 +0,0 @@
-From ac6edc14a931f10413d4586c2d0d1f2ddc1a416a Mon Sep 17 00:00:00 2001
-From: Sam Nazarko <email@samnazarko.co.uk>
-Date: Fri, 1 Apr 2016 17:27:21 +0100
-Subject: [PATCH] smsc95xx: Experimental: Enable turbo_mode and
- packetsize=2560 by default
-
-See: http://forum.kodi.tv/showthread.php?tid=285288
----
- drivers/net/usb/smsc95xx.c | 14 +++++++++-----
- 1 file changed, 9 insertions(+), 5 deletions(-)
-
---- a/drivers/net/usb/smsc95xx.c
-+++ b/drivers/net/usb/smsc95xx.c
-@@ -86,6 +86,10 @@ static bool truesize_mode = false;
- module_param(truesize_mode, bool, 0644);
- MODULE_PARM_DESC(truesize_mode, "Report larger truesize value");
- 
-+static int packetsize = 2560;
-+module_param(packetsize, int, 0644);
-+MODULE_PARM_DESC(packetsize, "Override the RX URB packet size");
-+
- static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index,
- 					    u32 *data, int in_pm)
- {
-@@ -1109,13 +1113,13 @@ static int smsc95xx_reset(struct usbnet
- 
- 	if (!turbo_mode) {
- 		burst_cap = 0;
--		dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE;
-+		dev->rx_urb_size = packetsize ? packetsize : MAX_SINGLE_PACKET_SIZE;
- 	} else if (dev->udev->speed == USB_SPEED_HIGH) {
--		burst_cap = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE;
--		dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE;
-+		dev->rx_urb_size = packetsize ? packetsize : DEFAULT_HS_BURST_CAP_SIZE;
-+		burst_cap = dev->rx_urb_size / HS_USB_PKT_SIZE;
- 	} else {
--		burst_cap = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE;
--		dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
-+		dev->rx_urb_size = packetsize ? packetsize : DEFAULT_FS_BURST_CAP_SIZE;
-+		burst_cap = dev->rx_urb_size / FS_USB_PKT_SIZE;
- 	}
- 
- 	netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld\n",

target/linux/bcm27xx/patches-4.19/950-0004-Allow-mac-address-to-be-set-in-smsc95xx.patch

@@ -1,96 +0,0 @@
-From fa1451d655f59916aec1c1e4fb17f19a78005066 Mon Sep 17 00:00:00 2001
-From: popcornmix <popcornmix@gmail.com>
-Date: Tue, 26 Mar 2013 17:26:38 +0000
-Subject: [PATCH] Allow mac address to be set in smsc95xx
-
-Signed-off-by: popcornmix <popcornmix@gmail.com>
----
- drivers/net/usb/smsc95xx.c | 56 ++++++++++++++++++++++++++++++++++++++
- 1 file changed, 56 insertions(+)
-
---- a/drivers/net/usb/smsc95xx.c
-+++ b/drivers/net/usb/smsc95xx.c
-@@ -60,6 +60,7 @@
- #define SUSPEND_SUSPEND3		(0x08)
- #define SUSPEND_ALLMODES		(SUSPEND_SUSPEND0 | SUSPEND_SUSPEND1 | \
- 					 SUSPEND_SUSPEND2 | SUSPEND_SUSPEND3)
-+#define MAC_ADDR_LEN                    (6)
- 
- #define CARRIER_CHECK_DELAY (2 * HZ)
- 
-@@ -90,6 +91,10 @@ static int packetsize = 2560;
- module_param(packetsize, int, 0644);
- MODULE_PARM_DESC(packetsize, "Override the RX URB packet size");
- 
-+static char *macaddr = ":";
-+module_param(macaddr, charp, 0);
-+MODULE_PARM_DESC(macaddr, "MAC address");
-+
- static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index,
- 					    u32 *data, int in_pm)
- {
-@@ -921,6 +926,53 @@ static int smsc95xx_ioctl(struct net_dev
- 	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
- }
- 
-+/* Check the macaddr module parameter for a MAC address */
-+static int smsc95xx_is_macaddr_param(struct usbnet *dev, u8 *dev_mac)
-+{
-+       int i, j, got_num, num;
-+       u8 mtbl[MAC_ADDR_LEN];
-+
-+       if (macaddr[0] == ':')
-+               return 0;
-+
-+       i = 0;
-+       j = 0;
-+       num = 0;
-+       got_num = 0;
-+       while (j < MAC_ADDR_LEN) {
-+               if (macaddr[i] && macaddr[i] != ':') {
-+                       got_num++;
-+                       if ('0' <= macaddr[i] && macaddr[i] <= '9')
-+                               num = num * 16 + macaddr[i] - '0';
-+                       else if ('A' <= macaddr[i] && macaddr[i] <= 'F')
-+                               num = num * 16 + 10 + macaddr[i] - 'A';
-+                       else if ('a' <= macaddr[i] && macaddr[i] <= 'f')
-+                               num = num * 16 + 10 + macaddr[i] - 'a';
-+                       else
-+                               break;
-+                       i++;
-+               } else if (got_num == 2) {
-+                       mtbl[j++] = (u8) num;
-+                       num = 0;
-+                       got_num = 0;
-+                       i++;
-+               } else {
-+                       break;
-+               }
-+       }
-+
-+       if (j == MAC_ADDR_LEN) {
-+               netif_dbg(dev, ifup, dev->net, "Overriding MAC address with: "
-+               "%02x:%02x:%02x:%02x:%02x:%02x\n", mtbl[0], mtbl[1], mtbl[2],
-+                                               mtbl[3], mtbl[4], mtbl[5]);
-+               for (i = 0; i < MAC_ADDR_LEN; i++)
-+                       dev_mac[i] = mtbl[i];
-+               return 1;
-+       } else {
-+               return 0;
-+       }
-+}
-+
- static void smsc95xx_init_mac_address(struct usbnet *dev)
- {
- 	const u8 *mac_addr;
-@@ -942,6 +994,10 @@ static void smsc95xx_init_mac_address(st
- 		}
- 	}
- 
-+	/* Check module parameters */
-+	if (smsc95xx_is_macaddr_param(dev, dev->net->dev_addr))
-+		return;
-+
- 	/* no useful static MAC address found. generate a random one */
- 	eth_hw_addr_random(dev->net);
- 	netif_dbg(dev, ifup, dev->net, "MAC address set to eth_random_addr\n");

target/linux/bcm27xx/patches-4.19/950-0005-Protect-__release_resource-against-resources-without.patch

@@ -1,28 +0,0 @@
-From 6209e42d384cfe873123b411a9bd170de027d4b5 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Fri, 13 Mar 2015 12:43:36 +0000
-Subject: [PATCH] Protect __release_resource against resources without
- parents
-
-Without this patch, removing a device tree overlay can crash here.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- kernel/resource.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/kernel/resource.c
-+++ b/kernel/resource.c
-@@ -213,6 +213,12 @@ static int __release_resource(struct res
- {
- 	struct resource *tmp, **p, *chd;
- 
-+	if (!old->parent) {
-+		WARN(old->sibling, "sibling but no parent");
-+		if (old->sibling)
-+			return -EINVAL;
-+		return 0;
-+	}
- 	p = &old->parent->child;
- 	for (;;) {
- 		tmp = *p;

target/linux/bcm27xx/patches-4.19/950-0006-irq-bcm2836-Prevent-spurious-interrupts-and-trap-the.patch

@@ -1,27 +0,0 @@
-From 5e9082be2fca137fe13b8af15aa0b9d178cd99c1 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Fri, 4 Dec 2015 17:41:50 +0000
-Subject: [PATCH] irq-bcm2836: Prevent spurious interrupts, and trap
- them early
-
-The old arch-specific IRQ macros included a dsb to ensure the
-write to clear the mailbox interrupt completed before returning
-from the interrupt. The BCM2836 irqchip driver needs the same
-precaution to avoid spurious interrupts.
-
-Spurious interrupts are still possible for other reasons,
-though, so trap them early.
----
- drivers/irqchip/irq-bcm2836.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/irqchip/irq-bcm2836.c
-+++ b/drivers/irqchip/irq-bcm2836.c
-@@ -144,6 +144,7 @@ __exception_irq_entry bcm2836_arm_irqchi
- 		u32 ipi = ffs(mbox_val) - 1;
- 
- 		writel(1 << ipi, mailbox0);
-+		dsb(sy);
- 		handle_IPI(ipi, regs);
- #endif
- 	} else if (stat) {

target/linux/bcm27xx/patches-4.19/950-0007-irq-bcm2836-Avoid-Invalid-trigger-warning.patch

@@ -1,24 +0,0 @@
-From b8a56e2dbae7dbcc0537b03f8a99eb5ba638876b Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Thu, 9 Feb 2017 14:33:30 +0000
-Subject: [PATCH] irq-bcm2836: Avoid "Invalid trigger warning"
-
-Initialise the level for each IRQ to avoid a warning from the
-arm arch timer code.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- drivers/irqchip/irq-bcm2836.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/irqchip/irq-bcm2836.c
-+++ b/drivers/irqchip/irq-bcm2836.c
-@@ -124,7 +124,7 @@ static int bcm2836_map(struct irq_domain
- 	irq_set_percpu_devid(irq);
- 	irq_domain_set_info(d, irq, hw, chip, d->host_data,
- 			    handle_percpu_devid_irq, NULL, NULL);
--	irq_set_status_flags(irq, IRQ_NOAUTOEN);
-+	irq_set_status_flags(irq, IRQ_NOAUTOEN | IRQ_TYPE_LEVEL_LOW);
- 
- 	return 0;
- }

target/linux/bcm27xx/patches-4.19/950-0008-irqchip-bcm2835-Add-FIQ-support.patch

@@ -1,127 +0,0 @@
-From 9334b65d3020bca44aa2695b84eda865ecc340e2 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
-Date: Fri, 12 Jun 2015 19:01:05 +0200
-Subject: [PATCH] irqchip: bcm2835: Add FIQ support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add a duplicate irq range with an offset on the hwirq's so the
-driver can detect that enable_fiq() is used.
-Tested with downstream dwc_otg USB controller driver.
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
-Reviewed-by: Eric Anholt <eric@anholt.net>
-Acked-by: Stephen Warren <swarren@wwwdotorg.org>
----
- arch/arm/mach-bcm/Kconfig     |  1 +
- drivers/irqchip/irq-bcm2835.c | 51 +++++++++++++++++++++++++++++++----
- 2 files changed, 47 insertions(+), 5 deletions(-)
-
---- a/arch/arm/mach-bcm/Kconfig
-+++ b/arch/arm/mach-bcm/Kconfig
-@@ -165,6 +165,7 @@ config ARCH_BCM2835
- 	select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
- 	select TIMER_OF
- 	select BCM2835_TIMER
-+	select FIQ
- 	select PINCTRL
- 	select PINCTRL_BCM2835
- 	help
---- a/drivers/irqchip/irq-bcm2835.c
-+++ b/drivers/irqchip/irq-bcm2835.c
-@@ -54,7 +54,7 @@
- #include <asm/exception.h>
- 
- /* Put the bank and irq (32 bits) into the hwirq */
--#define MAKE_HWIRQ(b, n)	((b << 5) | (n))
-+#define MAKE_HWIRQ(b, n)	(((b) << 5) | (n))
- #define HWIRQ_BANK(i)		(i >> 5)
- #define HWIRQ_BIT(i)		BIT(i & 0x1f)
- 
-@@ -70,9 +70,13 @@
- 					| SHORTCUT1_MASK | SHORTCUT2_MASK)
- 
- #define REG_FIQ_CONTROL		0x0c
-+#define REG_FIQ_ENABLE		0x80
-+#define REG_FIQ_DISABLE		0
- 
- #define NR_BANKS		3
- #define IRQS_PER_BANK		32
-+#define NUMBER_IRQS		MAKE_HWIRQ(NR_BANKS, 0)
-+#define FIQ_START		(NR_IRQS_BANK0 + MAKE_HWIRQ(NR_BANKS - 1, 0))
- 
- static const int reg_pending[] __initconst = { 0x00, 0x04, 0x08 };
- static const int reg_enable[] __initconst = { 0x18, 0x10, 0x14 };
-@@ -97,14 +101,38 @@ static void __exception_irq_entry bcm283
- 	struct pt_regs *regs);
- static void bcm2836_chained_handle_irq(struct irq_desc *desc);
- 
-+static inline unsigned int hwirq_to_fiq(unsigned long hwirq)
-+{
-+	hwirq -= NUMBER_IRQS;
-+	/*
-+	 * The hwirq numbering used in this driver is:
-+	 *   BASE (0-7) GPU1 (32-63) GPU2 (64-95).
-+	 * This differ from the one used in the FIQ register:
-+	 *   GPU1 (0-31) GPU2 (32-63) BASE (64-71)
-+	 */
-+	if (hwirq >= 32)
-+		return hwirq - 32;
-+
-+	return hwirq + 64;
-+}
-+
- static void armctrl_mask_irq(struct irq_data *d)
- {
--	writel_relaxed(HWIRQ_BIT(d->hwirq), intc.disable[HWIRQ_BANK(d->hwirq)]);
-+	if (d->hwirq >= NUMBER_IRQS)
-+		writel_relaxed(REG_FIQ_DISABLE, intc.base + REG_FIQ_CONTROL);
-+	else
-+		writel_relaxed(HWIRQ_BIT(d->hwirq),
-+			       intc.disable[HWIRQ_BANK(d->hwirq)]);
- }
- 
- static void armctrl_unmask_irq(struct irq_data *d)
- {
--	writel_relaxed(HWIRQ_BIT(d->hwirq), intc.enable[HWIRQ_BANK(d->hwirq)]);
-+	if (d->hwirq >= NUMBER_IRQS)
-+		writel_relaxed(REG_FIQ_ENABLE | hwirq_to_fiq(d->hwirq),
-+			       intc.base + REG_FIQ_CONTROL);
-+	else
-+		writel_relaxed(HWIRQ_BIT(d->hwirq),
-+			       intc.enable[HWIRQ_BANK(d->hwirq)]);
- }
- 
- static struct irq_chip armctrl_chip = {
-@@ -149,8 +177,9 @@ static int __init armctrl_of_init(struct
- 	if (!base)
- 		panic("%pOF: unable to map IC registers\n", node);
- 
--	intc.domain = irq_domain_add_linear(node, MAKE_HWIRQ(NR_BANKS, 0),
--			&armctrl_ops, NULL);
-+	intc.base = base;
-+	intc.domain = irq_domain_add_linear(node, NUMBER_IRQS * 2,
-+					    &armctrl_ops, NULL);
- 	if (!intc.domain)
- 		panic("%pOF: unable to create IRQ domain\n", node);
- 
-@@ -180,6 +209,18 @@ static int __init armctrl_of_init(struct
- 		set_handle_irq(bcm2835_handle_irq);
- 	}
- 
-+	/* Make a duplicate irq range which is used to enable FIQ */
-+	for (b = 0; b < NR_BANKS; b++) {
-+		for (i = 0; i < bank_irqs[b]; i++) {
-+			irq = irq_create_mapping(intc.domain,
-+					MAKE_HWIRQ(b, i) + NUMBER_IRQS);
-+			BUG_ON(irq <= 0);
-+			irq_set_chip(irq, &armctrl_chip);
-+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-+		}
-+	}
-+	init_FIQ(FIQ_START);
-+
- 	return 0;
- }
- 

target/linux/bcm27xx/patches-4.19/950-0009-irqchip-irq-bcm2835-Add-2836-FIQ-support.patch

@@ -1,99 +0,0 @@
-From a2416a2926904e3a07bdb10b9cf3c7871e87583c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
-Date: Fri, 23 Oct 2015 16:26:55 +0200
-Subject: [PATCH] irqchip: irq-bcm2835: Add 2836 FIQ support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
----
- drivers/irqchip/irq-bcm2835.c | 43 +++++++++++++++++++++++++++++++++--
- 1 file changed, 41 insertions(+), 2 deletions(-)
-
---- a/drivers/irqchip/irq-bcm2835.c
-+++ b/drivers/irqchip/irq-bcm2835.c
-@@ -50,8 +50,11 @@
- #include <linux/of_irq.h>
- #include <linux/irqchip.h>
- #include <linux/irqdomain.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/regmap.h>
- 
- #include <asm/exception.h>
-+#include <asm/mach/irq.h>
- 
- /* Put the bank and irq (32 bits) into the hwirq */
- #define MAKE_HWIRQ(b, n)	(((b) << 5) | (n))
-@@ -69,6 +72,9 @@
- #define BANK0_VALID_MASK	(BANK0_HWIRQ_MASK | BANK1_HWIRQ | BANK2_HWIRQ \
- 					| SHORTCUT1_MASK | SHORTCUT2_MASK)
- 
-+#undef ARM_LOCAL_GPU_INT_ROUTING
-+#define ARM_LOCAL_GPU_INT_ROUTING 0x0c
-+
- #define REG_FIQ_CONTROL		0x0c
- #define REG_FIQ_ENABLE		0x80
- #define REG_FIQ_DISABLE		0
-@@ -94,6 +100,7 @@ struct armctrl_ic {
- 	void __iomem *enable[NR_BANKS];
- 	void __iomem *disable[NR_BANKS];
- 	struct irq_domain *domain;
-+	struct regmap *local_regmap;
- };
- 
- static struct armctrl_ic intc __read_mostly;
-@@ -127,12 +134,35 @@ static void armctrl_mask_irq(struct irq_
- 
- static void armctrl_unmask_irq(struct irq_data *d)
- {
--	if (d->hwirq >= NUMBER_IRQS)
-+	if (d->hwirq >= NUMBER_IRQS) {
-+		if (num_online_cpus() > 1) {
-+			unsigned int data;
-+			int ret;
-+
-+			if (!intc.local_regmap) {
-+				pr_err("FIQ is disabled due to missing regmap\n");
-+				return;
-+			}
-+
-+			ret = regmap_read(intc.local_regmap,
-+					  ARM_LOCAL_GPU_INT_ROUTING, &data);
-+			if (ret) {
-+				pr_err("Failed to read int routing %d\n", ret);
-+				return;
-+			}
-+
-+			data &= ~0xc;
-+			data |= (1 << 2);
-+			regmap_write(intc.local_regmap,
-+				     ARM_LOCAL_GPU_INT_ROUTING, data);
-+		}
-+
- 		writel_relaxed(REG_FIQ_ENABLE | hwirq_to_fiq(d->hwirq),
- 			       intc.base + REG_FIQ_CONTROL);
--	else
-+	} else {
- 		writel_relaxed(HWIRQ_BIT(d->hwirq),
- 			       intc.enable[HWIRQ_BANK(d->hwirq)]);
-+	}
- }
- 
- static struct irq_chip armctrl_chip = {
-@@ -209,6 +239,15 @@ static int __init armctrl_of_init(struct
- 		set_handle_irq(bcm2835_handle_irq);
- 	}
- 
-+	if (is_2836) {
-+		intc.local_regmap =
-+			syscon_regmap_lookup_by_compatible("brcm,bcm2836-arm-local");
-+		if (IS_ERR(intc.local_regmap)) {
-+			pr_err("Failed to get local register map. FIQ is disabled for cpus > 1\n");
-+			intc.local_regmap = NULL;
-+		}
-+	}
-+
- 	/* Make a duplicate irq range which is used to enable FIQ */
- 	for (b = 0; b < NR_BANKS; b++) {
- 		for (i = 0; i < bank_irqs[b]; i++) {

target/linux/bcm27xx/patches-4.19/950-0010-spi-bcm2835-Support-pin-groups-other-than-7-11.patch

@@ -1,80 +0,0 @@
-From 61ca6adb1fc93622bb85acc18b6ce4f620c8c690 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Wed, 24 Jun 2015 14:10:44 +0100
-Subject: [PATCH] spi-bcm2835: Support pin groups other than 7-11
-
-The spi-bcm2835 driver automatically uses GPIO chip-selects due to
-some unreliability of the native ones. In doing so it chooses the
-same pins as the native chip-selects would use, but the existing
-code always uses pins 7 and 8, wherever the SPI function is mapped.
-
-Search the pinctrl group assigned to the driver for pins that
-correspond to native chip-selects, and use those for GPIO chip-
-selects.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- drivers/spi/spi-bcm2835.c | 45 ++++++++++++++++++++++++++++++++-------
- 1 file changed, 37 insertions(+), 8 deletions(-)
-
---- a/drivers/spi/spi-bcm2835.c
-+++ b/drivers/spi/spi-bcm2835.c
-@@ -687,6 +687,8 @@ static int bcm2835_spi_setup(struct spi_
- {
- 	int err;
- 	struct gpio_chip *chip;
-+	struct device_node *pins;
-+	u32 pingroup_index;
- 	/*
- 	 * sanity checking the native-chipselects
- 	 */
-@@ -703,15 +705,42 @@ static int bcm2835_spi_setup(struct spi_
- 			"setup: only two native chip-selects are supported\n");
- 		return -EINVAL;
- 	}
--	/* now translate native cs to GPIO */
- 
--	/* get the gpio chip for the base */
--	chip = gpiochip_find("pinctrl-bcm2835", chip_match_name);
--	if (!chip)
--		return 0;
-+	/* now translate native cs to GPIO */
-+	/* first look for chip select pins in the devices pin groups */
-+	for (pingroup_index = 0;
-+	     (pins = of_parse_phandle(spi->master->dev.of_node,
-+				     "pinctrl-0",
-+				      pingroup_index)) != 0;
-+	     pingroup_index++) {
-+		u32 pin;
-+		u32 pin_index;
-+		for (pin_index = 0;
-+		     of_property_read_u32_index(pins,
-+						"brcm,pins",
-+						pin_index,
-+						&pin) == 0;
-+		     pin_index++) {
-+			if (((spi->chip_select == 0) &&
-+			     ((pin == 8) || (pin == 36) || (pin == 46))) ||
-+			    ((spi->chip_select == 1) &&
-+			     ((pin == 7) || (pin == 35)))) {
-+				spi->cs_gpio = pin;
-+				break;
-+			}
-+		}
-+		of_node_put(pins);
-+	}
-+	/* if that fails, assume GPIOs 7-11 are used */
-+	if (!gpio_is_valid(spi->cs_gpio) ) {
-+		/* get the gpio chip for the base */
-+		chip = gpiochip_find("pinctrl-bcm2835", chip_match_name);
-+		if (!chip)
-+			return 0;
- 
--	/* and calculate the real CS */
--	spi->cs_gpio = chip->base + 8 - spi->chip_select;
-+		/* and calculate the real CS */
-+		spi->cs_gpio = chip->base + 8 - spi->chip_select;
-+	}
- 
- 	/* and set up the "mode" and level */
- 	dev_info(&spi->dev, "setting up native-CS%i as GPIO %i\n",

target/linux/bcm27xx/patches-4.19/950-0011-spi-bcm2835-Disable-forced-software-CS.patch

@@ -1,34 +0,0 @@
-From 2610aceda837370048f86b4af27852463c3b5a47 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Fri, 1 Jul 2016 22:09:24 +0100
-Subject: [PATCH] spi-bcm2835: Disable forced software CS
-
-Select software CS in bcm2708_common.dtsi, and disable the automatic
-conversion in the driver to allow hardware CS to be re-enabled with an
-overlay.
-
-See: https://github.com/raspberrypi/linux/issues/1547
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- drivers/spi/spi-bcm2835.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/spi/spi-bcm2835.c
-+++ b/drivers/spi/spi-bcm2835.c
-@@ -706,6 +706,7 @@ static int bcm2835_spi_setup(struct spi_
- 		return -EINVAL;
- 	}
- 
-+#if 0
- 	/* now translate native cs to GPIO */
- 	/* first look for chip select pins in the devices pin groups */
- 	for (pingroup_index = 0;
-@@ -755,6 +756,7 @@ static int bcm2835_spi_setup(struct spi_
- 			spi->chip_select, spi->cs_gpio, err);
- 		return err;
- 	}
-+#endif
- 
- 	return 0;
- }

target/linux/bcm27xx/patches-4.19/950-0012-spi-bcm2835-Remove-unused-code.patch

@@ -1,88 +0,0 @@
-From 80dc41f5617db0dbe3e17a399603a50b91997c5b Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Tue, 8 Nov 2016 21:35:38 +0000
-Subject: [PATCH] spi-bcm2835: Remove unused code
-
----
- drivers/spi/spi-bcm2835.c | 61 ---------------------------------------
- 1 file changed, 61 deletions(-)
-
---- a/drivers/spi/spi-bcm2835.c
-+++ b/drivers/spi/spi-bcm2835.c
-@@ -678,17 +678,8 @@ static void bcm2835_spi_set_cs(struct sp
- 	bcm2835_wr(bs, BCM2835_SPI_CS, cs);
- }
- 
--static int chip_match_name(struct gpio_chip *chip, void *data)
--{
--	return !strcmp(chip->label, data);
--}
--
- static int bcm2835_spi_setup(struct spi_device *spi)
- {
--	int err;
--	struct gpio_chip *chip;
--	struct device_node *pins;
--	u32 pingroup_index;
- 	/*
- 	 * sanity checking the native-chipselects
- 	 */
-@@ -706,58 +697,6 @@ static int bcm2835_spi_setup(struct spi_
- 		return -EINVAL;
- 	}
- 
--#if 0
--	/* now translate native cs to GPIO */
--	/* first look for chip select pins in the devices pin groups */
--	for (pingroup_index = 0;
--	     (pins = of_parse_phandle(spi->master->dev.of_node,
--				     "pinctrl-0",
--				      pingroup_index)) != 0;
--	     pingroup_index++) {
--		u32 pin;
--		u32 pin_index;
--		for (pin_index = 0;
--		     of_property_read_u32_index(pins,
--						"brcm,pins",
--						pin_index,
--						&pin) == 0;
--		     pin_index++) {
--			if (((spi->chip_select == 0) &&
--			     ((pin == 8) || (pin == 36) || (pin == 46))) ||
--			    ((spi->chip_select == 1) &&
--			     ((pin == 7) || (pin == 35)))) {
--				spi->cs_gpio = pin;
--				break;
--			}
--		}
--		of_node_put(pins);
--	}
--	/* if that fails, assume GPIOs 7-11 are used */
--	if (!gpio_is_valid(spi->cs_gpio) ) {
--		/* get the gpio chip for the base */
--		chip = gpiochip_find("pinctrl-bcm2835", chip_match_name);
--		if (!chip)
--			return 0;
--
--		/* and calculate the real CS */
--		spi->cs_gpio = chip->base + 8 - spi->chip_select;
--	}
--
--	/* and set up the "mode" and level */
--	dev_info(&spi->dev, "setting up native-CS%i as GPIO %i\n",
--		 spi->chip_select, spi->cs_gpio);
--
--	/* set up GPIO as output and pull to the correct level */
--	err = gpio_direction_output(spi->cs_gpio,
--				    (spi->mode & SPI_CS_HIGH) ? 0 : 1);
--	if (err) {
--		dev_err(&spi->dev,
--			"could not set CS%i gpio %i as output: %i",
--			spi->chip_select, spi->cs_gpio, err);
--		return err;
--	}
--#endif
--
- 	return 0;
- }
- 

target/linux/bcm27xx/patches-4.19/950-0013-dmaengine-bcm2835-Load-driver-early-and-support-lega.patch

@@ -1,101 +0,0 @@
-From 10d11b6b5410b9d31845efd23147fd08477a5151 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
-Date: Sat, 3 Oct 2015 22:22:55 +0200
-Subject: [PATCH] dmaengine: bcm2835: Load driver early and support
- legacy API
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Load driver early since at least bcm2708_fb doesn't support deferred
-probing and even if it did, we don't want the video driver deferred.
-Support the legacy DMA API which is needed by bcm2708_fb.
-Don't mask out channel 2.
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
----
- drivers/dma/Kconfig       |  2 +-
- drivers/dma/bcm2835-dma.c | 26 +++++++++++++++++++++++++-
- 2 files changed, 26 insertions(+), 2 deletions(-)
-
---- a/drivers/dma/Kconfig
-+++ b/drivers/dma/Kconfig
-@@ -131,7 +131,7 @@ config COH901318
- 
- config DMA_BCM2835
- 	tristate "BCM2835 DMA engine support"
--	depends on ARCH_BCM2835
-+	depends on ARCH_BCM2835 || ARCH_BCM2708 || ARCH_BCM2709
- 	select DMA_ENGINE
- 	select DMA_VIRTUAL_CHANNELS
- 
---- a/drivers/dma/bcm2835-dma.c
-+++ b/drivers/dma/bcm2835-dma.c
-@@ -37,6 +37,7 @@
- #include <linux/interrupt.h>
- #include <linux/list.h>
- #include <linux/module.h>
-+#include <linux/platform_data/dma-bcm2708.h>
- #include <linux/platform_device.h>
- #include <linux/slab.h>
- #include <linux/io.h>
-@@ -48,6 +49,7 @@
- 
- #define BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED 14
- #define BCM2835_DMA_CHAN_NAME_SIZE 8
-+#define BCM2835_DMA_BULK_MASK  BIT(0)
- 
- struct bcm2835_dmadev {
- 	struct dma_device ddev;
-@@ -914,6 +916,9 @@ static int bcm2835_dma_probe(struct plat
- 	base = devm_ioremap_resource(&pdev->dev, res);
- 	if (IS_ERR(base))
- 		return PTR_ERR(base);
-+	rc = bcm_dmaman_probe(pdev, base, BCM2835_DMA_BULK_MASK);
-+	if (rc)
-+		dev_err(&pdev->dev, "Failed to initialize the legacy API\n");
- 
- 	od->base = base;
- 
-@@ -952,6 +957,9 @@ static int bcm2835_dma_probe(struct plat
- 		goto err_no_dma;
- 	}
- 
-+	/* Channel 0 is used by the legacy API */
-+	chans_available &= ~BCM2835_DMA_BULK_MASK;
-+
- 	/* get irqs for each channel that we support */
- 	for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) {
- 		/* skip masked out channels */
-@@ -1026,6 +1034,7 @@ static int bcm2835_dma_remove(struct pla
- {
- 	struct bcm2835_dmadev *od = platform_get_drvdata(pdev);
- 
-+	bcm_dmaman_remove(pdev);
- 	dma_async_device_unregister(&od->ddev);
- 	bcm2835_dma_free(od);
- 
-@@ -1041,7 +1050,22 @@ static struct platform_driver bcm2835_dm
- 	},
- };
- 
--module_platform_driver(bcm2835_dma_driver);
-+static int bcm2835_dma_init(void)
-+{
-+	return platform_driver_register(&bcm2835_dma_driver);
-+}
-+
-+static void bcm2835_dma_exit(void)
-+{
-+	platform_driver_unregister(&bcm2835_dma_driver);
-+}
-+
-+/*
-+ * Load after serial driver (arch_initcall) so we see the messages if it fails,
-+ * but before drivers (module_init) that need a DMA channel.
-+ */
-+subsys_initcall(bcm2835_dma_init);
-+module_exit(bcm2835_dma_exit);
- 
- MODULE_ALIAS("platform:bcm2835-dma");
- MODULE_DESCRIPTION("BCM2835 DMA engine driver");

target/linux/bcm27xx/patches-4.19/950-0014-firmware-Updated-mailbox-header.patch

@@ -1,36 +0,0 @@
-From e00fde59167c31cf376c74b333b58f011b244dfa Mon Sep 17 00:00:00 2001
-From: popcornmix <popcornmix@gmail.com>
-Date: Mon, 25 Jan 2016 17:25:12 +0000
-Subject: [PATCH] firmware: Updated mailbox header
-
----
- include/soc/bcm2835/raspberrypi-firmware.h | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/include/soc/bcm2835/raspberrypi-firmware.h
-+++ b/include/soc/bcm2835/raspberrypi-firmware.h
-@@ -12,6 +12,8 @@
- #include <linux/types.h>
- #include <linux/of_device.h>
- 
-+#define RPI_FIRMWARE_CHAN_FB		1
-+
- struct rpi_firmware;
- 
- enum rpi_firmware_property_status {
-@@ -76,6 +78,8 @@ enum rpi_firmware_property_tag {
- 	RPI_FIRMWARE_GET_CUSTOMER_OTP =                       0x00030021,
- 	RPI_FIRMWARE_GET_DOMAIN_STATE =                       0x00030030,
- 	RPI_FIRMWARE_GET_THROTTLED =                          0x00030046,
-+	RPI_FIRMWARE_GET_CLOCK_MEASURED =                     0x00030047,
-+	RPI_FIRMWARE_NOTIFY_REBOOT =                          0x00030048,
- 	RPI_FIRMWARE_SET_CLOCK_STATE =                        0x00038001,
- 	RPI_FIRMWARE_SET_CLOCK_RATE =                         0x00038002,
- 	RPI_FIRMWARE_SET_VOLTAGE =                            0x00038003,
-@@ -158,5 +162,6 @@ static inline struct rpi_firmware *rpi_f
- 	return NULL;
- }
- #endif
-+int rpi_firmware_transaction(struct rpi_firmware *fw, u32 chan, u32 data);
- 
- #endif /* __SOC_RASPBERRY_FIRMWARE_H__ */

target/linux/bcm27xx/patches-4.19/950-0015-rtc-Add-SPI-alias-for-pcf2123-driver.patch

@@ -1,20 +0,0 @@
-From 3c8282fa8f1a50bf5ff5b83e83d97b37433bbdd9 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Wed, 15 Jun 2016 16:48:41 +0100
-Subject: [PATCH] rtc: Add SPI alias for pcf2123 driver
-
-Without this alias, Device Tree won't cause the driver
-to be loaded.
-
-See: https://github.com/raspberrypi/linux/pull/1510
----
- drivers/rtc/rtc-pcf2123.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/rtc/rtc-pcf2123.c
-+++ b/drivers/rtc/rtc-pcf2123.c
-@@ -472,3 +472,4 @@ module_spi_driver(pcf2123_driver);
- MODULE_AUTHOR("Chris Verges <chrisv@cyberswitching.com>");
- MODULE_DESCRIPTION("NXP PCF2123 RTC driver");
- MODULE_LICENSE("GPL");
-+MODULE_ALIAS("spi:rtc-pcf2123");

target/linux/bcm27xx/patches-4.19/950-0016-watchdog-bcm2835-Support-setting-reboot-partition.patch

@@ -1,102 +0,0 @@
-From 8018869c6c8590018c1cd272475eda0dbf72a7ec Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
-Date: Fri, 7 Oct 2016 16:50:59 +0200
-Subject: [PATCH] watchdog: bcm2835: Support setting reboot partition
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The Raspberry Pi firmware looks at the RSTS register to know which
-partition to boot from. The reboot syscall command
-LINUX_REBOOT_CMD_RESTART2 supports passing in a string argument.
-
-Add support for passing in a partition number 0..63 to boot from.
-Partition 63 is a special partiton indicating halt.
-If the partition doesn't exist, the firmware falls back to partition 0.
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
----
- drivers/watchdog/bcm2835_wdt.c | 49 +++++++++++++++++++---------------
- 1 file changed, 27 insertions(+), 22 deletions(-)
-
---- a/drivers/watchdog/bcm2835_wdt.c
-+++ b/drivers/watchdog/bcm2835_wdt.c
-@@ -31,13 +31,7 @@
- #define PM_RSTC_WRCFG_SET		0x00000030
- #define PM_RSTC_WRCFG_FULL_RESET	0x00000020
- #define PM_RSTC_RESET			0x00000102
--
--/*
-- * The Raspberry Pi firmware uses the RSTS register to know which partition
-- * to boot from. The partition value is spread into bits 0, 2, 4, 6, 8, 10.
-- * Partition 63 is a special partition used by the firmware to indicate halt.
-- */
--#define PM_RSTS_RASPBERRYPI_HALT	0x555
-+#define PM_RSTS_PARTITION_CLR          0xfffffaaa
- 
- #define SECS_TO_WDOG_TICKS(x) ((x) << 16)
- #define WDOG_TICKS_TO_SECS(x) ((x) >> 16)
-@@ -94,9 +88,24 @@ static unsigned int bcm2835_wdt_get_time
- 	return WDOG_TICKS_TO_SECS(ret & PM_WDOG_TIME_SET);
- }
- 
--static void __bcm2835_restart(struct bcm2835_wdt *wdt)
-+/*
-+ * The Raspberry Pi firmware uses the RSTS register to know which partiton
-+ * to boot from. The partiton value is spread into bits 0, 2, 4, 6, 8, 10.
-+ * Partiton 63 is a special partition used by the firmware to indicate halt.
-+ */
-+
-+static void __bcm2835_restart(struct bcm2835_wdt *wdt, u8 partition)
- {
--	u32 val;
-+	u32 val, rsts;
-+
-+	rsts = (partition & BIT(0)) | ((partition & BIT(1)) << 1) |
-+	       ((partition & BIT(2)) << 2) | ((partition & BIT(3)) << 3) |
-+	       ((partition & BIT(4)) << 4) | ((partition & BIT(5)) << 5);
-+
-+	val = readl_relaxed(wdt->base + PM_RSTS);
-+	val &= PM_RSTS_PARTITION_CLR;
-+	val |= PM_PASSWORD | rsts;
-+	writel_relaxed(val, wdt->base + PM_RSTS);
- 
- 	/* use a timeout of 10 ticks (~150us) */
- 	writel_relaxed(10 | PM_PASSWORD, wdt->base + PM_WDOG);
-@@ -114,7 +123,13 @@ static int bcm2835_restart(struct watchd
- {
- 	struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog);
- 
--	__bcm2835_restart(wdt);
-+	unsigned long long val;
-+	u8 partition = 0;
-+
-+	if (data && !kstrtoull(data, 0, &val) && val <= 63)
-+		partition = val;
-+
-+	__bcm2835_restart(wdt, partition);
- 
- 	return 0;
- }
-@@ -152,19 +167,9 @@ static void bcm2835_power_off(void)
- 		of_find_compatible_node(NULL, NULL, "brcm,bcm2835-pm-wdt");
- 	struct platform_device *pdev = of_find_device_by_node(np);
- 	struct bcm2835_wdt *wdt = platform_get_drvdata(pdev);
--	u32 val;
--
--	/*
--	 * We set the watchdog hard reset bit here to distinguish this reset
--	 * from the normal (full) reset. bootcode.bin will not reboot after a
--	 * hard reset.
--	 */
--	val = readl_relaxed(wdt->base + PM_RSTS);
--	val |= PM_PASSWORD | PM_RSTS_RASPBERRYPI_HALT;
--	writel_relaxed(val, wdt->base + PM_RSTS);
- 
--	/* Continue with normal reset mechanism */
--	__bcm2835_restart(wdt);
-+	/* Partition 63 tells the firmware that this is a halt */
-+	__bcm2835_restart(wdt, 63);
- }
- 
- static int bcm2835_wdt_probe(struct platform_device *pdev)

target/linux/bcm27xx/patches-4.19/950-0017-reboot-Use-power-off-rather-than-busy-spinning-when-.patch

@@ -1,23 +0,0 @@
-From c296f60b7a5b3c4f82aa0768030ebf64ab64792b Mon Sep 17 00:00:00 2001
-From: popcornmix <popcornmix@gmail.com>
-Date: Tue, 5 Apr 2016 19:40:12 +0100
-Subject: [PATCH] reboot: Use power off rather than busy spinning when
- halt is requested
-
----
- arch/arm/kernel/reboot.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
---- a/arch/arm/kernel/reboot.c
-+++ b/arch/arm/kernel/reboot.c
-@@ -105,9 +105,7 @@ void machine_shutdown(void)
-  */
- void machine_halt(void)
- {
--	local_irq_disable();
--	smp_send_stop();
--	while (1);
-+	machine_power_off();
- }
- 
- /*

target/linux/bcm27xx/patches-4.19/950-0018-bcm-Make-RASPBERRYPI_POWER-depend-on-PM.patch

@@ -1,19 +0,0 @@
-From f54671cb165da1c13d33777cd59329a464f9863b Mon Sep 17 00:00:00 2001
-From: popcornmix <popcornmix@gmail.com>
-Date: Wed, 9 Nov 2016 13:02:52 +0000
-Subject: [PATCH] bcm: Make RASPBERRYPI_POWER depend on PM
-
----
- drivers/soc/bcm/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/soc/bcm/Kconfig
-+++ b/drivers/soc/bcm/Kconfig
-@@ -4,6 +4,7 @@ config RASPBERRYPI_POWER
- 	bool "Raspberry Pi power domain driver"
- 	depends on ARCH_BCM2835 || (COMPILE_TEST && OF)
- 	depends on RASPBERRYPI_FIRMWARE=y
-+	depends on PM
- 	select PM_GENERIC_DOMAINS if PM
- 	help
- 	  This enables support for the RPi power domains which can be enabled

target/linux/bcm27xx/patches-4.19/950-0019-Register-the-clocks-early-during-the-boot-process-so.patch

@@ -1,45 +0,0 @@
-From 05caac5f388bf0b821d4a75e480a74ae40fc8478 Mon Sep 17 00:00:00 2001
-From: Martin Sperl <kernel@martin.sperl.org>
-Date: Fri, 2 Sep 2016 16:45:27 +0100
-Subject: [PATCH] Register the clocks early during the boot process, so
- that special/critical clocks can get enabled early on in the boot process
- avoiding the risk of disabling a clock, pll_divider or pll when a claiming
- driver fails to install propperly - maybe it needs to defer.
-
-Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
----
- drivers/clk/bcm/clk-bcm2835.c | 15 +++++++++++++--
- 1 file changed, 13 insertions(+), 2 deletions(-)
-
---- a/drivers/clk/bcm/clk-bcm2835.c
-+++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -2184,8 +2184,15 @@ static int bcm2835_clk_probe(struct plat
- 	if (ret)
- 		return ret;
- 
--	return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
-+	ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
- 				      &cprman->onecell);
-+	if (ret)
-+		return ret;
-+
-+	/* note that we have registered all the clocks */
-+	dev_dbg(dev, "registered %d clocks\n", asize);
-+
-+	return 0;
- }
- 
- static const struct of_device_id bcm2835_clk_of_match[] = {
-@@ -2202,7 +2209,11 @@ static struct platform_driver bcm2835_cl
- 	.probe          = bcm2835_clk_probe,
- };
- 
--builtin_platform_driver(bcm2835_clk_driver);
-+static int __init __bcm2835_clk_driver_init(void)
-+{
-+	return platform_driver_register(&bcm2835_clk_driver);
-+}
-+core_initcall(__bcm2835_clk_driver_init);
- 
- MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
- MODULE_DESCRIPTION("BCM2835 clock driver");

target/linux/bcm27xx/patches-4.19/950-0020-bcm2835-rng-Avoid-initialising-if-already-enabled.patch

@@ -1,25 +0,0 @@
-From d5df60f32f3c3b2f7f6d758ac08de6acb9fd947f Mon Sep 17 00:00:00 2001
-From: popcornmix <popcornmix@gmail.com>
-Date: Tue, 6 Dec 2016 17:05:39 +0000
-Subject: [PATCH] bcm2835-rng: Avoid initialising if already enabled
-
-Avoids the 0x40000 cycles of warmup again if firmware has already used it
----
- drivers/char/hw_random/bcm2835-rng.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/drivers/char/hw_random/bcm2835-rng.c
-+++ b/drivers/char/hw_random/bcm2835-rng.c
-@@ -105,8 +105,10 @@ static int bcm2835_rng_init(struct hwrng
- 	}
- 
- 	/* set warm-up count & enable */
--	rng_writel(priv, RNG_WARMUP_COUNT, RNG_STATUS);
--	rng_writel(priv, RNG_RBGEN, RNG_CTRL);
-+	if (!(rng_readl(priv, RNG_CTRL) & RNG_RBGEN)) {
-+		rng_writel(priv, RNG_WARMUP_COUNT, RNG_STATUS);
-+		rng_writel(priv, RNG_RBGEN, RNG_CTRL);
-+	}
- 
- 	return ret;
- }

target/linux/bcm27xx/patches-4.19/950-0021-kbuild-Ignore-dtco-targets-when-filtering-symbols.patch

@@ -1,20 +0,0 @@
-From 3437db6e19e29ff9b6d2eef9a5ee703f04ca1d41 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Wed, 24 Aug 2016 16:28:44 +0100
-Subject: [PATCH] kbuild: Ignore dtco targets when filtering symbols
-
----
- scripts/Kbuild.include | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/scripts/Kbuild.include
-+++ b/scripts/Kbuild.include
-@@ -287,7 +287,7 @@ ksym_dep_filter =
- 	    $(CPP) $(call flags_nodeps,c_flags) -D__KSYM_DEPS__ $< ;;        \
- 	  as_*_S|cpp_s_S)                                                    \
- 	    $(CPP) $(call flags_nodeps,a_flags) -D__KSYM_DEPS__ $< ;;        \
--	  boot*|build*|cpp_its_S|*cpp_lds_S|dtc|host*|vdso*) : ;;            \
-+	  boot*|build*|cpp_its_S|*cpp_lds_S|dtc*|host*|vdso*) : ;;            \
- 	  *) echo "Don't know how to preprocess $(1)" >&2; false ;;          \
- 	esac | tr ";" "\n" | sed -n 's/^.*=== __KSYM_\(.*\) ===.*$$/_\1/p'
- 

target/linux/bcm27xx/patches-4.19/950-0022-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch

@@ -1,28 +0,0 @@
-From f1f199b682e258674137105f49d033cb81612ab7 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Mon, 13 Feb 2017 17:20:08 +0000
-Subject: [PATCH] clk-bcm2835: Mark used PLLs and dividers CRITICAL
-
-The VPU configures and relies on several PLLs and dividers. Mark all
-enabled dividers and their PLLs as CRITICAL to prevent the kernel from
-switching them off.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- drivers/clk/bcm/clk-bcm2835.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/clk/bcm/clk-bcm2835.c
-+++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1362,6 +1362,11 @@ bcm2835_register_pll_divider(struct bcm2
- 	divider->div.hw.init = &init;
- 	divider->div.table = NULL;
- 
-+	if (!(cprman_read(cprman, data->cm_reg) & data->hold_mask)) {
-+		init.flags |= CLK_IS_CRITICAL;
-+		divider->div.flags |= CLK_IS_CRITICAL;
-+	}
-+
- 	divider->cprman = cprman;
- 	divider->data = data;
- 

target/linux/bcm27xx/patches-4.19/950-0023-clk-bcm2835-Add-claim-clocks-property.patch

@@ -1,102 +0,0 @@
-From 787234827719aa1d44b079969419d91b665a491d Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Mon, 13 Feb 2017 17:20:08 +0000
-Subject: [PATCH] clk-bcm2835: Add claim-clocks property
-
-The claim-clocks property can be used to prevent PLLs and dividers
-from being marked as critical. It contains a vector of clock IDs,
-as defined by dt-bindings/clock/bcm2835.h.
-
-Use this mechanism to claim PLLD_DSI0, PLLD_DSI1, PLLH_AUX and
-PLLH_PIX for the vc4_kms_v3d driver.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- drivers/clk/bcm/clk-bcm2835.c | 34 ++++++++++++++++++++++++++++++++--
- 1 file changed, 32 insertions(+), 2 deletions(-)
-
---- a/drivers/clk/bcm/clk-bcm2835.c
-+++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1294,6 +1294,8 @@ static const struct clk_ops bcm2835_vpu_
- 	.debug_init = bcm2835_clock_debug_init,
- };
- 
-+static bool bcm2835_clk_is_claimed(const char *name);
-+
- static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman,
- 					   const struct bcm2835_pll_data *data)
- {
-@@ -1310,6 +1312,9 @@ static struct clk_hw *bcm2835_register_p
- 	init.ops = &bcm2835_pll_clk_ops;
- 	init.flags = CLK_IGNORE_UNUSED;
- 
-+	if (!bcm2835_clk_is_claimed(data->name))
-+		init.flags |= CLK_IS_CRITICAL;
-+
- 	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
- 	if (!pll)
- 		return NULL;
-@@ -1363,8 +1368,10 @@ bcm2835_register_pll_divider(struct bcm2
- 	divider->div.table = NULL;
- 
- 	if (!(cprman_read(cprman, data->cm_reg) & data->hold_mask)) {
--		init.flags |= CLK_IS_CRITICAL;
--		divider->div.flags |= CLK_IS_CRITICAL;
-+		if (!bcm2835_clk_is_claimed(data->source_pll))
-+			init.flags |= CLK_IS_CRITICAL;
-+		if (!bcm2835_clk_is_claimed(data->name))
-+			divider->div.flags |= CLK_IS_CRITICAL;
- 	}
- 
- 	divider->cprman = cprman;
-@@ -2116,6 +2123,8 @@ static const struct bcm2835_clk_desc clk
- 		.ctl_reg = CM_PERIICTL),
- };
- 
-+static bool bcm2835_clk_claimed[ARRAY_SIZE(clk_desc_array)];
-+
- /*
-  * Permanently take a reference on the parent of the SDRAM clock.
-  *
-@@ -2135,6 +2144,19 @@ static int bcm2835_mark_sdc_parent_criti
- 	return clk_prepare_enable(parent);
- }
- 
-+static bool bcm2835_clk_is_claimed(const char *name)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(clk_desc_array); i++) {
-+		const char *clk_name = *(const char **)(clk_desc_array[i].data);
-+		if (!strcmp(name, clk_name))
-+		    return bcm2835_clk_claimed[i];
-+	}
-+
-+	return false;
-+}
-+
- static int bcm2835_clk_probe(struct platform_device *pdev)
- {
- 	struct device *dev = &pdev->dev;
-@@ -2144,6 +2166,7 @@ static int bcm2835_clk_probe(struct plat
- 	const struct bcm2835_clk_desc *desc;
- 	const size_t asize = ARRAY_SIZE(clk_desc_array);
- 	size_t i;
-+	u32 clk_id;
- 	int ret;
- 
- 	cprman = devm_kzalloc(dev,
-@@ -2159,6 +2182,13 @@ static int bcm2835_clk_probe(struct plat
- 	if (IS_ERR(cprman->regs))
- 		return PTR_ERR(cprman->regs);
- 
-+	memset(bcm2835_clk_claimed, 0, sizeof(bcm2835_clk_claimed));
-+	for (i = 0;
-+	     !of_property_read_u32_index(pdev->dev.of_node, "claim-clocks",
-+					 i, &clk_id);
-+	     i++)
-+		bcm2835_clk_claimed[clk_id]= true;
-+
- 	memcpy(cprman->real_parent_names, cprman_parent_names,
- 	       sizeof(cprman_parent_names));
- 	of_clk_parent_fill(dev->of_node, cprman->real_parent_names,

target/linux/bcm27xx/patches-4.19/950-0024-clk-bcm2835-Read-max-core-clock-from-firmware.patch

@@ -1,115 +0,0 @@
-From f8e7e4a65b3f99452db67cfb7e21afc80b8af7f2 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Mon, 6 Mar 2017 09:06:18 +0000
-Subject: [PATCH] clk-bcm2835: Read max core clock from firmware
-
-The VPU is responsible for managing the core clock, usually under
-direction from the bcm2835-cpufreq driver but not via the clk-bcm2835
-driver. Since the core frequency can change without warning, it is
-safer to report the maximum clock rate to users of the core clock -
-I2C, SPI and the mini UART - to err on the safe side when calculating
-clock divisors.
-
-If the DT node for the clock driver includes a reference to the
-firmware node, use the firmware API to query the maximum core clock
-instead of reading the divider registers.
-
-Prior to this patch, a "100KHz" I2C bus was sometimes clocked at about
-160KHz. In particular, switching to the 4.9 kernel was likely to break
-SenseHAT usage on a Pi3.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- drivers/clk/bcm/clk-bcm2835.c | 39 ++++++++++++++++++++++++++++++++++-
- 1 file changed, 38 insertions(+), 1 deletion(-)
-
---- a/drivers/clk/bcm/clk-bcm2835.c
-+++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -44,6 +44,7 @@
- #include <linux/platform_device.h>
- #include <linux/slab.h>
- #include <dt-bindings/clock/bcm2835.h>
-+#include <soc/bcm2835/raspberrypi-firmware.h>
- 
- #define CM_PASSWORD		0x5a000000
- 
-@@ -298,6 +299,8 @@
- #define LOCK_TIMEOUT_NS		100000000
- #define BCM2835_MAX_FB_RATE	1750000000u
- 
-+#define VCMSG_ID_CORE_CLOCK     4
-+
- /*
-  * Names of clocks used within the driver that need to be replaced
-  * with an external parent's name.  This array is in the order that
-@@ -316,6 +319,7 @@ static const char *const cprman_parent_n
- struct bcm2835_cprman {
- 	struct device *dev;
- 	void __iomem *regs;
-+	struct rpi_firmware *fw;
- 	spinlock_t regs_lock; /* spinlock for all clocks */
- 
- 	/*
-@@ -998,6 +1002,30 @@ static unsigned long bcm2835_clock_get_r
- 	return bcm2835_clock_rate_from_divisor(clock, parent_rate, div);
- }
- 
-+static unsigned long bcm2835_clock_get_rate_vpu(struct clk_hw *hw,
-+						unsigned long parent_rate)
-+{
-+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
-+	struct bcm2835_cprman *cprman = clock->cprman;
-+
-+	if (cprman->fw) {
-+		struct {
-+			u32 id;
-+			u32 val;
-+		} packet;
-+
-+		packet.id = VCMSG_ID_CORE_CLOCK;
-+		packet.val = 0;
-+
-+		if (!rpi_firmware_property(cprman->fw,
-+					   RPI_FIRMWARE_GET_MAX_CLOCK_RATE,
-+					   &packet, sizeof(packet)))
-+			return packet.val;
-+	}
-+
-+	return bcm2835_clock_get_rate(hw, parent_rate);
-+}
-+
- static void bcm2835_clock_wait_busy(struct bcm2835_clock *clock)
- {
- 	struct bcm2835_cprman *cprman = clock->cprman;
-@@ -1286,7 +1314,7 @@ static int bcm2835_vpu_clock_is_on(struc
-  */
- static const struct clk_ops bcm2835_vpu_clock_clk_ops = {
- 	.is_prepared = bcm2835_vpu_clock_is_on,
--	.recalc_rate = bcm2835_clock_get_rate,
-+	.recalc_rate = bcm2835_clock_get_rate_vpu,
- 	.set_rate = bcm2835_clock_set_rate,
- 	.determine_rate = bcm2835_clock_determine_rate,
- 	.set_parent = bcm2835_clock_set_parent,
-@@ -2165,6 +2193,7 @@ static int bcm2835_clk_probe(struct plat
- 	struct resource *res;
- 	const struct bcm2835_clk_desc *desc;
- 	const size_t asize = ARRAY_SIZE(clk_desc_array);
-+	struct device_node *fw_node;
- 	size_t i;
- 	u32 clk_id;
- 	int ret;
-@@ -2182,6 +2211,14 @@ static int bcm2835_clk_probe(struct plat
- 	if (IS_ERR(cprman->regs))
- 		return PTR_ERR(cprman->regs);
- 
-+	fw_node = of_parse_phandle(dev->of_node, "firmware", 0);
-+	if (fw_node) {
-+		struct rpi_firmware *fw = rpi_firmware_get(NULL);
-+		if (!fw)
-+			return -EPROBE_DEFER;
-+		cprman->fw = fw;
-+	}
-+
- 	memset(bcm2835_clk_claimed, 0, sizeof(bcm2835_clk_claimed));
- 	for (i = 0;
- 	     !of_property_read_u32_index(pdev->dev.of_node, "claim-clocks",

target/linux/bcm27xx/patches-4.19/950-0025-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch

@@ -1,38 +0,0 @@
-From 6272fd1e55945522b156a28c1f605b69ae6e05b7 Mon Sep 17 00:00:00 2001
-From: Eric Anholt <eric@anholt.net>
-Date: Mon, 9 May 2016 17:28:18 -0700
-Subject: [PATCH] clk: bcm2835: Mark GPIO clocks enabled at boot as
- critical.
-
-These divide off of PLLD_PER and are used for the ethernet and wifi
-PHYs source PLLs.  Neither of them is currently represented by a phy
-device that would grab the clock for us.
-
-This keeps other drivers from killing the networking PHYs when they
-disable their own clocks and trigger PLLD_PER's refcount going to 0.
-
-v2: Skip marking as critical if they aren't on at boot.
-
-Signed-off-by: Eric Anholt <eric@anholt.net>
----
- drivers/clk/bcm/clk-bcm2835.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/drivers/clk/bcm/clk-bcm2835.c
-+++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1454,6 +1454,15 @@ static struct clk_hw *bcm2835_register_c
- 	init.flags = data->flags | CLK_IGNORE_UNUSED;
- 
- 	/*
-+	 * Some GPIO clocks for ethernet/wifi PLLs are marked as
-+	 * critical (since some platforms use them), but if the
-+	 * firmware didn't have them turned on then they clearly
-+	 * aren't actually critical.
-+	 */
-+	if ((cprman_read(cprman, data->ctl_reg) & CM_ENABLE) == 0)
-+		init.flags &= ~CLK_IS_CRITICAL;
-+
-+	/*
- 	 * Pass the CLK_SET_RATE_PARENT flag if we are allowed to propagate
- 	 * rate changes on at least of the parents.
- 	 */

target/linux/bcm27xx/patches-4.19/950-0026-sound-Demote-deferral-errors-to-INFO-level.patch

@@ -1,37 +0,0 @@
-From fd613a5d5dc7f023d7d983aee9d854fd3a41d669 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Thu, 9 Feb 2017 14:36:44 +0000
-Subject: [PATCH] sound: Demote deferral errors to INFO level
-
-At present there is no mechanism to specify driver load order,
-which can lead to deferrals and repeated retries until successful.
-Since this situation is expected, reduce the dmesg level to
-INFO and mention that the operation will be retried.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- sound/soc/soc-core.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/sound/soc/soc-core.c
-+++ b/sound/soc/soc-core.c
-@@ -868,8 +868,8 @@ static int soc_bind_dai_link(struct snd_
- 	cpu_dai_component.dai_name = dai_link->cpu_dai_name;
- 	rtd->cpu_dai = snd_soc_find_dai(&cpu_dai_component);
- 	if (!rtd->cpu_dai) {
--		dev_info(card->dev, "ASoC: CPU DAI %s not registered\n",
--			 dai_link->cpu_dai_name);
-+		dev_info(card->dev, "ASoC: CPU DAI %s not registered - will retry\n",
-+			dai_link->cpu_dai_name);
- 		goto _err_defer;
- 	}
- 	snd_soc_rtdcom_add(rtd, rtd->cpu_dai->component);
-@@ -881,7 +881,7 @@ static int soc_bind_dai_link(struct snd_
- 	for (i = 0; i < rtd->num_codecs; i++) {
- 		codec_dais[i] = snd_soc_find_dai(&codecs[i]);
- 		if (!codec_dais[i]) {
--			dev_err(card->dev, "ASoC: CODEC DAI %s not registered\n",
-+			dev_info(card->dev, "ASoC: CODEC DAI %s not registered - will retry\n",
- 				codecs[i].dai_name);
- 			goto _err_defer;
- 		}

target/linux/bcm27xx/patches-4.19/950-0027-Update-vfpmodule.c.patch

@@ -1,137 +0,0 @@
-From 0eb679e4b41dab1e421415917feae44d00e1687f Mon Sep 17 00:00:00 2001
-From: Claggy3 <stephen.maclagan@hotmail.com>
-Date: Sat, 11 Feb 2017 14:00:30 +0000
-Subject: [PATCH] Update vfpmodule.c
-
-Christopher Alexander Tobias Schulze - May 2, 2015, 11:57 a.m.
-This patch fixes a problem with VFP state save and restore related
-to exception handling (panic with message "BUG: unsupported FP
-instruction in kernel mode") present on VFP11 floating point units
-(as used with ARM1176JZF-S CPUs, e.g. on first generation Raspberry
-Pi boards). This patch was developed and discussed on
-
-   https://github.com/raspberrypi/linux/issues/859
-
-A precondition to see the crashes is that floating point exception
-traps are enabled. In this case, the VFP11 might determine that a FPU
-operation needs to trap at a point in time when it is not possible to
-signal this to the ARM11 core any more. The VFP11 will then set the
-FPEXC.EX bit and store the trapped opcode in FPINST. (In some cases,
-a second opcode might have been accepted by the VFP11 before the
-exception was detected and could be reported to the ARM11 - in this
-case, the VFP11 also sets FPEXC.FP2V and stores the second opcode in
-FPINST2.)
-
-If FPEXC.EX is set, the VFP11 will "bounce" the next FPU opcode issued
-by the ARM11 CPU, which will be seen by the ARM11 as an undefined opcode
-trap. The VFP support code examines the FPEXC.EX and FPEXC.FP2V bits
-to decide what actions to take, i.e., whether to emulate the opcodes
-found in FPINST and FPINST2, and whether to retry the bounced instruction.
-
-If a user space application has left the VFP11 in this "pending trap"
-state, the next FPU opcode issued to the VFP11 might actually be the
-VSTMIA operation vfp_save_state() uses to store the FPU registers
-to memory (in our test cases, when building the signal stack frame).
-In this case, the kernel crashes as described above.
-
-This patch fixes the problem by making sure that vfp_save_state() is
-always entered with FPEXC.EX cleared. (The current value of FPEXC has
-already been saved, so this does not corrupt the context. Clearing
-FPEXC.EX has no effects on FPINST or FPINST2. Also note that many
-callers already modify FPEXC by setting FPEXC.EN before invoking
-vfp_save_state().)
-
-This patch also addresses a second problem related to FPEXC.EX: After
-returning from signal handling, the kernel reloads the VFP context
-from the user mode stack. However, the current code explicitly clears
-both FPEXC.EX and FPEXC.FP2V during reload. As VFP11 requires these
-bits to be preserved, this patch disables clearing them for VFP
-implementations belonging to architecture 1. There should be no
-negative side effects: the user can set both bits by executing FPU
-opcodes anyway, and while user code may now place arbitrary values
-into FPINST and FPINST2 (e.g., non-VFP ARM opcodes) the VFP support
-code knows which instructions can be emulated, and rejects other
-opcodes with "unhandled bounce" messages, so there should be no
-security impact from allowing reloading FPEXC.EX and FPEXC.FP2V.
-
-Signed-off-by: Christopher Alexander Tobias Schulze <cat.schulze@alice-dsl.net>
----
- arch/arm/vfp/vfpmodule.c | 25 +++++++++++++++++++------
- 1 file changed, 19 insertions(+), 6 deletions(-)
-
---- a/arch/arm/vfp/vfpmodule.c
-+++ b/arch/arm/vfp/vfpmodule.c
-@@ -179,8 +179,11 @@ static int vfp_notifier(struct notifier_
- 		 * case the thread migrates to a different CPU. The
- 		 * restoring is done lazily.
- 		 */
--		if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu])
-+		if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu]) {
-+			/* vfp_save_state oopses on VFP11 if EX bit set */
-+			fmxr(FPEXC, fpexc & ~FPEXC_EX);
- 			vfp_save_state(vfp_current_hw_state[cpu], fpexc);
-+		}
- #endif
- 
- 		/*
-@@ -462,13 +465,16 @@ static int vfp_pm_suspend(void)
- 	/* if vfp is on, then save state for resumption */
- 	if (fpexc & FPEXC_EN) {
- 		pr_debug("%s: saving vfp state\n", __func__);
-+		/* vfp_save_state oopses on VFP11 if EX bit set */
-+		fmxr(FPEXC, fpexc & ~FPEXC_EX);
- 		vfp_save_state(&ti->vfpstate, fpexc);
- 
- 		/* disable, just in case */
- 		fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
- 	} else if (vfp_current_hw_state[ti->cpu]) {
- #ifndef CONFIG_SMP
--		fmxr(FPEXC, fpexc | FPEXC_EN);
-+		/* vfp_save_state oopses on VFP11 if EX bit set */
-+		fmxr(FPEXC, (fpexc & ~FPEXC_EX) | FPEXC_EN);
- 		vfp_save_state(vfp_current_hw_state[ti->cpu], fpexc);
- 		fmxr(FPEXC, fpexc);
- #endif
-@@ -531,7 +537,8 @@ void vfp_sync_hwstate(struct thread_info
- 		/*
- 		 * Save the last VFP state on this CPU.
- 		 */
--		fmxr(FPEXC, fpexc | FPEXC_EN);
-+		/* vfp_save_state oopses on VFP11 if EX bit set */
-+		fmxr(FPEXC, (fpexc & ~FPEXC_EX) | FPEXC_EN);
- 		vfp_save_state(&thread->vfpstate, fpexc | FPEXC_EN);
- 		fmxr(FPEXC, fpexc);
- 	}
-@@ -597,6 +604,7 @@ int vfp_restore_user_hwstate(struct user
- 	struct thread_info *thread = current_thread_info();
- 	struct vfp_hard_struct *hwstate = &thread->vfpstate.hard;
- 	unsigned long fpexc;
-+	u32 fpsid = fmrx(FPSID);
- 
- 	/* Disable VFP to avoid corrupting the new thread state. */
- 	vfp_flush_hwstate(thread);
-@@ -619,8 +627,12 @@ int vfp_restore_user_hwstate(struct user
- 	/* Ensure the VFP is enabled. */
- 	fpexc |= FPEXC_EN;
- 
--	/* Ensure FPINST2 is invalid and the exception flag is cleared. */
--	fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
-+	/* Mask FPXEC_EX and FPEXC_FP2V if not required by VFP arch */
-+	if ((fpsid & FPSID_ARCH_MASK) != (1 << FPSID_ARCH_BIT)) {
-+		/* Ensure FPINST2 is invalid and the exception flag is cleared. */
-+		fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
-+	}
-+
- 	hwstate->fpexc = fpexc;
- 
- 	hwstate->fpinst = ufp_exc->fpinst;
-@@ -690,7 +702,8 @@ void kernel_neon_begin(void)
- 	cpu = get_cpu();
- 
- 	fpexc = fmrx(FPEXC) | FPEXC_EN;
--	fmxr(FPEXC, fpexc);
-+	/* vfp_save_state oopses on VFP11 if EX bit set */
-+	fmxr(FPEXC, fpexc & ~FPEXC_EX);
- 
- 	/*
- 	 * Save the userland NEON/VFP state. Under UP,

target/linux/bcm27xx/patches-4.19/950-0028-i2c-bcm2835-Add-debug-support.patch

@@ -1,189 +0,0 @@
-From b6494e2070983020d56f82d9d0be74d11b001823 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
-Date: Tue, 1 Nov 2016 15:15:41 +0100
-Subject: [PATCH] i2c: bcm2835: Add debug support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This adds a debug module parameter to aid in debugging transfer issues
-by printing info to the kernel log. When enabled, status values are
-collected in the interrupt routine and msg info in
-bcm2835_i2c_start_transfer(). This is done in a way that tries to avoid
-affecting timing. Having printk in the isr can mask issues.
-
-debug values (additive):
-1: Print info on error
-2: Print info on all transfers
-3: Print messages before transfer is started
-
-The value can be changed at runtime:
-/sys/module/i2c_bcm2835/parameters/debug
-
-Example output, debug=3:
-[  747.114448] bcm2835_i2c_xfer: msg(1/2) write addr=0x54, len=2 flags= [i2c1]
-[  747.114463] bcm2835_i2c_xfer: msg(2/2) read addr=0x54, len=32 flags= [i2c1]
-[  747.117809] start_transfer: msg(1/2) write addr=0x54, len=2 flags= [i2c1]
-[  747.117825] isr: remain=2, status=0x30000055 : TA TXW TXD TXE  [i2c1]
-[  747.117839] start_transfer: msg(2/2) read addr=0x54, len=32 flags= [i2c1]
-[  747.117849] isr: remain=32, status=0xd0000039 : TA RXR TXD RXD  [i2c1]
-[  747.117861] isr: remain=20, status=0xd0000039 : TA RXR TXD RXD  [i2c1]
-[  747.117870] isr: remain=8, status=0x32 : DONE TXD RXD  [i2c1]
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
----
- drivers/i2c/busses/i2c-bcm2835.c | 99 +++++++++++++++++++++++++++++++-
- 1 file changed, 98 insertions(+), 1 deletion(-)
-
---- a/drivers/i2c/busses/i2c-bcm2835.c
-+++ b/drivers/i2c/busses/i2c-bcm2835.c
-@@ -56,6 +56,18 @@
- #define BCM2835_I2C_CDIV_MIN	0x0002
- #define BCM2835_I2C_CDIV_MAX	0xFFFE
- 
-+static unsigned int debug;
-+module_param(debug, uint, 0644);
-+MODULE_PARM_DESC(debug, "1=err, 2=isr, 3=xfer");
-+
-+#define BCM2835_DEBUG_MAX	512
-+struct bcm2835_debug {
-+	struct i2c_msg *msg;
-+	int msg_idx;
-+	size_t remain;
-+	u32 status;
-+};
-+
- struct bcm2835_i2c_dev {
- 	struct device *dev;
- 	void __iomem *regs;
-@@ -69,8 +81,78 @@ struct bcm2835_i2c_dev {
- 	u32 msg_err;
- 	u8 *msg_buf;
- 	size_t msg_buf_remaining;
-+	struct bcm2835_debug debug[BCM2835_DEBUG_MAX];
-+	unsigned int debug_num;
-+	unsigned int debug_num_msgs;
- };
- 
-+static inline void bcm2835_debug_add(struct bcm2835_i2c_dev *i2c_dev, u32 s)
-+{
-+	if (!i2c_dev->debug_num_msgs || i2c_dev->debug_num >= BCM2835_DEBUG_MAX)
-+		return;
-+
-+	i2c_dev->debug[i2c_dev->debug_num].msg = i2c_dev->curr_msg;
-+	i2c_dev->debug[i2c_dev->debug_num].msg_idx =
-+				i2c_dev->debug_num_msgs - i2c_dev->num_msgs;
-+	i2c_dev->debug[i2c_dev->debug_num].remain = i2c_dev->msg_buf_remaining;
-+	i2c_dev->debug[i2c_dev->debug_num].status = s;
-+	i2c_dev->debug_num++;
-+}
-+
-+static void bcm2835_debug_print_status(struct bcm2835_i2c_dev *i2c_dev,
-+				       struct bcm2835_debug *d)
-+{
-+	u32 s = d->status;
-+
-+	pr_info("isr: remain=%zu, status=0x%x : %s%s%s%s%s%s%s%s%s%s [i2c%d]\n",
-+		d->remain, s,
-+		s & BCM2835_I2C_S_TA ? "TA " : "",
-+		s & BCM2835_I2C_S_DONE ? "DONE " : "",
-+		s & BCM2835_I2C_S_TXW ? "TXW " : "",
-+		s & BCM2835_I2C_S_RXR ? "RXR " : "",
-+		s & BCM2835_I2C_S_TXD ? "TXD " : "",
-+		s & BCM2835_I2C_S_RXD ? "RXD " : "",
-+		s & BCM2835_I2C_S_TXE ? "TXE " : "",
-+		s & BCM2835_I2C_S_RXF ? "RXF " : "",
-+		s & BCM2835_I2C_S_ERR ? "ERR " : "",
-+		s & BCM2835_I2C_S_CLKT ? "CLKT " : "",
-+		i2c_dev->adapter.nr);
-+}
-+
-+static void bcm2835_debug_print_msg(struct bcm2835_i2c_dev *i2c_dev,
-+				    struct i2c_msg *msg, int i, int total,
-+				    const char *fname)
-+{
-+	pr_info("%s: msg(%d/%d) %s addr=0x%02x, len=%u flags=%s%s%s%s%s%s%s [i2c%d]\n",
-+		fname, i, total,
-+		msg->flags & I2C_M_RD ? "read" : "write", msg->addr, msg->len,
-+		msg->flags & I2C_M_TEN ? "TEN" : "",
-+		msg->flags & I2C_M_RECV_LEN ? "RECV_LEN" : "",
-+		msg->flags & I2C_M_NO_RD_ACK ? "NO_RD_ACK" : "",
-+		msg->flags & I2C_M_IGNORE_NAK ? "IGNORE_NAK" : "",
-+		msg->flags & I2C_M_REV_DIR_ADDR ? "REV_DIR_ADDR" : "",
-+		msg->flags & I2C_M_NOSTART ? "NOSTART" : "",
-+		msg->flags & I2C_M_STOP ? "STOP" : "",
-+		i2c_dev->adapter.nr);
-+}
-+
-+static void bcm2835_debug_print(struct bcm2835_i2c_dev *i2c_dev)
-+{
-+	struct bcm2835_debug *d;
-+	unsigned int i;
-+
-+	for (i = 0; i < i2c_dev->debug_num; i++) {
-+		d = &i2c_dev->debug[i];
-+		if (d->status == ~0)
-+			bcm2835_debug_print_msg(i2c_dev, d->msg, d->msg_idx,
-+				i2c_dev->debug_num_msgs, "start_transfer");
-+		else
-+			bcm2835_debug_print_status(i2c_dev, d);
-+	}
-+	if (i2c_dev->debug_num >= BCM2835_DEBUG_MAX)
-+		pr_info("BCM2835_DEBUG_MAX reached\n");
-+}
-+
- static inline void bcm2835_i2c_writel(struct bcm2835_i2c_dev *i2c_dev,
- 				      u32 reg, u32 val)
- {
-@@ -189,6 +271,7 @@ static void bcm2835_i2c_start_transfer(s
- 	bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_A, msg->addr);
- 	bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DLEN, msg->len);
- 	bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, c);
-+	bcm2835_debug_add(i2c_dev, ~0);
- }
- 
- static void bcm2835_i2c_finish_transfer(struct bcm2835_i2c_dev *i2c_dev)
-@@ -215,6 +298,7 @@ static irqreturn_t bcm2835_i2c_isr(int t
- 	u32 val, err;
- 
- 	val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S);
-+	bcm2835_debug_add(i2c_dev, val);
- 
- 	err = val & (BCM2835_I2C_S_CLKT | BCM2835_I2C_S_ERR);
- 	if (err) {
-@@ -281,6 +365,13 @@ static int bcm2835_i2c_xfer(struct i2c_a
- 	unsigned long time_left;
- 	int i, ret;
- 
-+	if (debug)
-+		i2c_dev->debug_num_msgs = num;
-+
-+	if (debug > 2)
-+		for (i = 0; i < num; i++)
-+			bcm2835_debug_print_msg(i2c_dev, &msgs[i], i + 1, num, __func__);
-+
- 	for (i = 0; i < (num - 1); i++)
- 		if (msgs[i].flags & I2C_M_RD) {
- 			dev_warn_once(i2c_dev->dev,
-@@ -303,6 +394,10 @@ static int bcm2835_i2c_xfer(struct i2c_a
- 
- 	bcm2835_i2c_finish_transfer(i2c_dev);
- 
-+	if (debug > 1 || (debug && (!time_left || i2c_dev->msg_err)))
-+		bcm2835_debug_print(i2c_dev);
-+	i2c_dev->debug_num_msgs = 0;
-+	i2c_dev->debug_num = 0;
- 	if (!time_left) {
- 		bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C,
- 				   BCM2835_I2C_C_CLEAR);
-@@ -313,7 +408,9 @@ static int bcm2835_i2c_xfer(struct i2c_a
- 	if (!i2c_dev->msg_err)
- 		return num;
- 
--	dev_dbg(i2c_dev->dev, "i2c transfer failed: %x\n", i2c_dev->msg_err);
-+	if (debug)
-+		dev_err(i2c_dev->dev, "i2c transfer failed: %x\n",
-+			i2c_dev->msg_err);
- 
- 	if (i2c_dev->msg_err & BCM2835_I2C_S_ERR)
- 		return -EREMOTEIO;

target/linux/bcm27xx/patches-4.19/950-0029-mm-Remove-the-PFN-busy-warning.patch

@@ -1,25 +0,0 @@
-From a8a5ad555b7168ce90263395dc5f26b99af9bf4e Mon Sep 17 00:00:00 2001
-From: Eric Anholt <eric@anholt.net>
-Date: Thu, 18 Dec 2014 16:07:15 -0800
-Subject: [PATCH] mm: Remove the PFN busy warning
-
-See commit dae803e165a11bc88ca8dbc07a11077caf97bbcb -- the warning is
-expected sometimes when using CMA.  However, that commit still spams
-my kernel log with these warnings.
-
-Signed-off-by: Eric Anholt <eric@anholt.net>
----
- mm/page_alloc.c | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/mm/page_alloc.c
-+++ b/mm/page_alloc.c
-@@ -8008,8 +8008,6 @@ int alloc_contig_range(unsigned long sta
- 
- 	/* Make sure the range is really isolated. */
- 	if (test_pages_isolated(outer_start, end, false)) {
--		pr_info_ratelimited("%s: [%lx, %lx) PFNs busy\n",
--			__func__, outer_start, end);
- 		ret = -EBUSY;
- 		goto done;
- 	}

target/linux/bcm27xx/patches-4.19/950-0030-ASoC-Add-prompt-for-ICS43432-codec.patch

@@ -1,25 +0,0 @@
-From e4cd2b482eadc7f7901ba6c0df3080f792c4d655 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Thu, 23 Mar 2017 10:06:56 +0000
-Subject: [PATCH] ASoC: Add prompt for ICS43432 codec
-
-Without a prompt string, a config setting can't be included in a
-defconfig. Give CONFIG_SND_SOC_ICS43432 a prompt so that Pi soundcards
-can use the driver.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- sound/soc/codecs/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/sound/soc/codecs/Kconfig
-+++ b/sound/soc/codecs/Kconfig
-@@ -616,7 +616,7 @@ config SND_SOC_HDAC_HDMI
- 	select HDMI
- 
- config SND_SOC_ICS43432
--	tristate
-+	tristate "InvenSense ICS43432 I2S microphone codec"
- 
- config SND_SOC_INNO_RK3036
- 	tristate "Inno codec driver for RK3036 SoC"

target/linux/bcm27xx/patches-4.19/950-0031-irqchip-irq-bcm2836-Remove-regmap-and-syscon-use.patch

@@ -1,112 +0,0 @@
-From f1905bc5137db49ef155f835d52d68cb86c4c9a9 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Tue, 23 Jan 2018 16:52:45 +0000
-Subject: [PATCH] irqchip: irq-bcm2836: Remove regmap and syscon use
-
-The syscon node defines a register range that duplicates that used by
-the local_intc node on bcm2836/7. Since irq-bcm2835 and irq-bcm2836 are
-built in and always present together (both drivers are enabled by
-CONFIG_ARCH_BCM2835), it is possible to replace the syscon usage with a
-global variable that simplifies the code. Doing so does lose the
-locking provided by regmap, but as only one side is using the regmap
-interface (irq-bcm2835 uses readl and write) there is no loss of
-atomicity.
-
-See: https://github.com/raspberrypi/firmware/issues/926
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- drivers/irqchip/irq-bcm2835.c | 32 ++++++++++++--------------------
- drivers/irqchip/irq-bcm2836.c |  5 +++++
- 2 files changed, 17 insertions(+), 20 deletions(-)
-
---- a/drivers/irqchip/irq-bcm2835.c
-+++ b/drivers/irqchip/irq-bcm2835.c
-@@ -50,8 +50,6 @@
- #include <linux/of_irq.h>
- #include <linux/irqchip.h>
- #include <linux/irqdomain.h>
--#include <linux/mfd/syscon.h>
--#include <linux/regmap.h>
- 
- #include <asm/exception.h>
- #include <asm/mach/irq.h>
-@@ -100,7 +98,7 @@ struct armctrl_ic {
- 	void __iomem *enable[NR_BANKS];
- 	void __iomem *disable[NR_BANKS];
- 	struct irq_domain *domain;
--	struct regmap *local_regmap;
-+	void __iomem *local_base;
- };
- 
- static struct armctrl_ic intc __read_mostly;
-@@ -137,24 +135,20 @@ static void armctrl_unmask_irq(struct ir
- 	if (d->hwirq >= NUMBER_IRQS) {
- 		if (num_online_cpus() > 1) {
- 			unsigned int data;
--			int ret;
- 
--			if (!intc.local_regmap) {
--				pr_err("FIQ is disabled due to missing regmap\n");
-+			if (!intc.local_base) {
-+				pr_err("FIQ is disabled due to missing arm_local_intc\n");
- 				return;
- 			}
- 
--			ret = regmap_read(intc.local_regmap,
--					  ARM_LOCAL_GPU_INT_ROUTING, &data);
--			if (ret) {
--				pr_err("Failed to read int routing %d\n", ret);
--				return;
--			}
-+			data = readl_relaxed(intc.local_base +
-+					     ARM_LOCAL_GPU_INT_ROUTING);
- 
- 			data &= ~0xc;
- 			data |= (1 << 2);
--			regmap_write(intc.local_regmap,
--				     ARM_LOCAL_GPU_INT_ROUTING, data);
-+			writel_relaxed(data,
-+				       intc.local_base +
-+				       ARM_LOCAL_GPU_INT_ROUTING);
- 		}
- 
- 		writel_relaxed(REG_FIQ_ENABLE | hwirq_to_fiq(d->hwirq),
-@@ -240,12 +234,10 @@ static int __init armctrl_of_init(struct
- 	}
- 
- 	if (is_2836) {
--		intc.local_regmap =
--			syscon_regmap_lookup_by_compatible("brcm,bcm2836-arm-local");
--		if (IS_ERR(intc.local_regmap)) {
--			pr_err("Failed to get local register map. FIQ is disabled for cpus > 1\n");
--			intc.local_regmap = NULL;
--		}
-+		extern void __iomem * __attribute__((weak)) arm_local_intc;
-+		intc.local_base = arm_local_intc;
-+		if (!intc.local_base)
-+			pr_err("Failed to get local intc base. FIQ is disabled for cpus > 1\n");
- 	}
- 
- 	/* Make a duplicate irq range which is used to enable FIQ */
---- a/drivers/irqchip/irq-bcm2836.c
-+++ b/drivers/irqchip/irq-bcm2836.c
-@@ -30,6 +30,9 @@ struct bcm2836_arm_irqchip_intc {
- 
- static struct bcm2836_arm_irqchip_intc intc  __read_mostly;
- 
-+void __iomem *arm_local_intc;
-+EXPORT_SYMBOL_GPL(arm_local_intc);
-+
- static void bcm2836_arm_irqchip_mask_per_cpu_irq(unsigned int reg_offset,
- 						 unsigned int bit,
- 						 int cpu)
-@@ -234,6 +237,8 @@ static int __init bcm2836_arm_irqchip_l1
- 		panic("%pOF: unable to map local interrupt registers\n", node);
- 	}
- 
-+	arm_local_intc = intc.base;
-+
- 	bcm2835_init_local_timer_frequency();
- 
- 	intc.domain = irq_domain_add_linear(node, LAST_IRQ + 1,

target/linux/bcm27xx/patches-4.19/950-0032-lan78xx-Enable-LEDs-and-auto-negotiation.patch

@@ -1,48 +0,0 @@
-From 645eb2cf211c04496c9f5daca23ab16ce796b0df Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Tue, 17 Oct 2017 15:04:29 +0100
-Subject: [PATCH] lan78xx: Enable LEDs and auto-negotiation
-
-For applications of the LAN78xx that don't have valid programmed
-EEPROMs or OTPs, enabling both LEDs and auto-negotiation by default
-seems reasonable.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- drivers/net/usb/lan78xx.c | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
---- a/drivers/net/usb/lan78xx.c
-+++ b/drivers/net/usb/lan78xx.c
-@@ -2477,6 +2477,11 @@ static int lan78xx_reset(struct lan78xx_
- 	int ret = 0;
- 	unsigned long timeout;
- 	u8 sig;
-+	bool has_eeprom;
-+	bool has_otp;
-+
-+	has_eeprom = !lan78xx_read_eeprom(dev, 0, 0, NULL);
-+	has_otp = !lan78xx_read_otp(dev, 0, 0, NULL);
- 
- 	ret = lan78xx_read_reg(dev, HW_CFG, &buf);
- 	buf |= HW_CFG_LRST_;
-@@ -2530,6 +2535,9 @@ static int lan78xx_reset(struct lan78xx_
- 
- 	ret = lan78xx_read_reg(dev, HW_CFG, &buf);
- 	buf |= HW_CFG_MEF_;
-+	/* If no valid EEPROM and no valid OTP, enable the LEDs by default */
-+	if (!has_eeprom && !has_otp)
-+	    buf |= HW_CFG_LED0_EN_ | HW_CFG_LED1_EN_;
- 	ret = lan78xx_write_reg(dev, HW_CFG, buf);
- 
- 	ret = lan78xx_read_reg(dev, USB_CFG0, &buf);
-@@ -2585,6 +2593,9 @@ static int lan78xx_reset(struct lan78xx_
- 			buf |= MAC_CR_AUTO_DUPLEX_ | MAC_CR_AUTO_SPEED_;
- 		}
- 	}
-+	/* If no valid EEPROM and no valid OTP, enable AUTO negotiation */
-+	if (!has_eeprom && !has_otp)
-+	    buf |= MAC_CR_AUTO_DUPLEX_ | MAC_CR_AUTO_SPEED_;
- 	ret = lan78xx_write_reg(dev, MAC_CR, buf);
- 
- 	ret = lan78xx_read_reg(dev, MAC_TX, &buf);

target/linux/bcm27xx/patches-4.19/950-0033-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch

@@ -1,29 +0,0 @@
-From c048d8c7b1ae0d56d9ee1bca2be8cc9da5a43bba Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Tue, 23 Feb 2016 17:26:48 +0000
-Subject: [PATCH] amba_pl011: Don't use DT aliases for numbering
-
-The pl011 driver looks for DT aliases of the form "serial<n>",
-and if found uses <n> as the device ID. This can cause
-/dev/ttyAMA0 to become /dev/ttyAMA1, which is confusing if the
-other serial port is provided by the 8250 driver which doesn't
-use the same logic.
----
- drivers/tty/serial/amba-pl011.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/tty/serial/amba-pl011.c
-+++ b/drivers/tty/serial/amba-pl011.c
-@@ -2576,7 +2576,12 @@ static int pl011_setup_port(struct devic
- 	if (IS_ERR(base))
- 		return PTR_ERR(base);
- 
-+	/* Don't use DT serial<n> aliases - it causes the device to
-+	   be renumbered to ttyAMA1 if it is the second serial port in the
-+	   system, even though the other one is ttyS0. The 8250 driver
-+	   doesn't use this logic, so always remains ttyS0.
- 	index = pl011_probe_dt_alias(index, dev);
-+	*/
- 
- 	uap->old_cr = 0;
- 	uap->port.dev = dev;

target/linux/bcm27xx/patches-4.19/950-0034-amba_pl011-Round-input-clock-up.patch

@@ -1,86 +0,0 @@
-From 610cb34f3d7c5fdffb0db82538731714a2df1d13 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Wed, 1 Mar 2017 16:07:39 +0000
-Subject: [PATCH] amba_pl011: Round input clock up
-
-The UART clock is initialised to be as close to the requested
-frequency as possible without exceeding it. Now that there is a
-clock manager that returns the actual frequencies, an expected
-48MHz clock is reported as 47999625. If the requested baudrate
-== requested clock/16, there is no headroom and the slight
-reduction in actual clock rate results in failure.
-
-Detect cases where it looks like a "round" clock was chosen and
-adjust the reported clock to match that "round" value. As the
-code comment says:
-
-/*
- * If increasing a clock by less than 0.1% changes it
- * from ..999.. to ..000.., round up.
- */
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- drivers/tty/serial/amba-pl011.c | 23 +++++++++++++++++++++--
- 1 file changed, 21 insertions(+), 2 deletions(-)
-
---- a/drivers/tty/serial/amba-pl011.c
-+++ b/drivers/tty/serial/amba-pl011.c
-@@ -1650,6 +1650,23 @@ static void pl011_put_poll_char(struct u
- 
- #endif /* CONFIG_CONSOLE_POLL */
- 
-+unsigned long pl011_clk_round(unsigned long clk)
-+{
-+	unsigned long scaler;
-+
-+	/*
-+	 * If increasing a clock by less than 0.1% changes it
-+	 * from ..999.. to ..000.., round up.
-+	 */
-+	scaler = 1;
-+	while (scaler * 100000 < clk)
-+		scaler *= 10;
-+	if ((clk + scaler - 1)/scaler % 1000 == 0)
-+		clk = (clk/scaler + 1) * scaler;
-+
-+	return clk;
-+}
-+
- static int pl011_hwinit(struct uart_port *port)
- {
- 	struct uart_amba_port *uap =
-@@ -1666,7 +1683,7 @@ static int pl011_hwinit(struct uart_port
- 	if (retval)
- 		return retval;
- 
--	uap->port.uartclk = clk_get_rate(uap->clk);
-+	uap->port.uartclk = pl011_clk_round(clk_get_rate(uap->clk));
- 
- 	/* Clear pending error and receive interrupts */
- 	pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS |
-@@ -2322,7 +2339,7 @@ static int __init pl011_console_setup(st
- 			plat->init();
- 	}
- 
--	uap->port.uartclk = clk_get_rate(uap->clk);
-+	uap->port.uartclk = pl011_clk_round(clk_get_rate(uap->clk));
- 
- 	if (uap->vendor->fixed_options) {
- 		baud = uap->fixed_baud;
-@@ -2507,6 +2524,7 @@ static struct uart_driver amba_reg = {
- 	.cons			= AMBA_CONSOLE,
- };
- 
-+#if 0
- static int pl011_probe_dt_alias(int index, struct device *dev)
- {
- 	struct device_node *np;
-@@ -2538,6 +2556,7 @@ static int pl011_probe_dt_alias(int inde
- 
- 	return ret;
- }
-+#endif
- 
- /* unregisters the driver also if no more ports are left */
- static void pl011_unregister_port(struct uart_amba_port *uap)

target/linux/bcm27xx/patches-4.19/950-0035-amba_pl011-Insert-mb-for-correct-FIFO-handling.patch

@@ -1,27 +0,0 @@
-From 76627df3e5f0513118dac20710766f97fc5ca32d Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Fri, 29 Sep 2017 10:32:19 +0100
-Subject: [PATCH] amba_pl011: Insert mb() for correct FIFO handling
-
-The pl011 register accessor functions use the _relaxed versions of the
-standard readl() and writel() functions, meaning that there are no
-automatic memory barriers. When polling a FIFO status register to check
-for fullness, it is necessary to ensure that any outstanding writes have
-completed; otherwise the flags are effectively stale, making it possible
-that the next write is to a full FIFO.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- drivers/tty/serial/amba-pl011.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/tty/serial/amba-pl011.c
-+++ b/drivers/tty/serial/amba-pl011.c
-@@ -1383,6 +1383,7 @@ static bool pl011_tx_char(struct uart_am
- 		return false; /* unable to transmit character */
- 
- 	pl011_write(c, uap, REG_DR);
-+	mb();
- 	uap->port.icount.tx++;
- 
- 	return true;

target/linux/bcm27xx/patches-4.19/950-0036-amba_pl011-Add-cts-event-workaround-DT-property.patch

@@ -1,47 +0,0 @@
-From 17a4507175ca6018ea40e91c9d753bc39f043d99 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Fri, 29 Sep 2017 10:32:19 +0100
-Subject: [PATCH] amba_pl011: Add cts-event-workaround DT property
-
-The BCM2835 PL011 implementation seems to have a bug that can lead to a
-transmission lockup if CTS changes frequently. A workaround was added to
-the driver with a vendor-specific flag to enable it, but this flag is
-currently not set for ARM implementations.
-
-Add a "cts-event-workaround" property to Pi DTBs and use the presence
-of that property to force the flag to be enabled in the driver.
-
-See: https://github.com/raspberrypi/linux/issues/1280
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- Documentation/devicetree/bindings/serial/pl011.txt | 3 +++
- drivers/tty/serial/amba-pl011.c                    | 5 +++++
- 2 files changed, 8 insertions(+)
-
---- a/Documentation/devicetree/bindings/serial/pl011.txt
-+++ b/Documentation/devicetree/bindings/serial/pl011.txt
-@@ -35,6 +35,9 @@ Optional properties:
- - poll-timeout-ms:
- 	   Poll timeout when auto-poll is set, default
- 	   3000ms.
-+- cts-event-workaround:
-+	   Enables the (otherwise vendor-specific) workaround for the
-+	   CTS-induced TX lockup.
- 
- See also bindings/arm/primecell.txt
- 
---- a/drivers/tty/serial/amba-pl011.c
-+++ b/drivers/tty/serial/amba-pl011.c
-@@ -2659,6 +2659,11 @@ static int pl011_probe(struct amba_devic
- 	if (IS_ERR(uap->clk))
- 		return PTR_ERR(uap->clk);
- 
-+	if (of_property_read_bool(dev->dev.of_node, "cts-event-workaround")) {
-+	    vendor->cts_event_workaround = true;
-+	    dev_info(&dev->dev, "cts_event_workaround enabled\n");
-+	}
-+
- 	uap->reg_offset = vendor->reg_offset;
- 	uap->vendor = vendor;
- 	uap->fifosize = vendor->get_fifosize(dev);

target/linux/bcm27xx/patches-4.19/950-0037-pinctrl-bcm2835-Set-base-to-0-give-expected-gpio-num.patch

@@ -1,22 +0,0 @@
-From 491316e4e140152fb6c66fa99716450bb13ea49a Mon Sep 17 00:00:00 2001
-From: notro <notro@tronnes.org>
-Date: Thu, 10 Jul 2014 13:59:47 +0200
-Subject: [PATCH] pinctrl-bcm2835: Set base to 0 give expected gpio
- numbering
-
-Signed-off-by: Noralf Tronnes <notro@tronnes.org>
----
- drivers/pinctrl/bcm/pinctrl-bcm2835.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
-+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
-@@ -350,7 +350,7 @@ static const struct gpio_chip bcm2835_gp
- 	.get_direction = bcm2835_gpio_get_direction,
- 	.get = bcm2835_gpio_get,
- 	.set = bcm2835_gpio_set,
--	.base = -1,
-+	.base = 0,
- 	.ngpio = BCM2835_NUM_GPIOS,
- 	.can_sleep = false,
- };

target/linux/bcm27xx/patches-4.19/950-0038-Main-bcm2708-bcm2709-linux-port.patch

@@ -1,150 +0,0 @@
-From b37c8c275b90b3730ad99b0e96ae5e36895b26e8 Mon Sep 17 00:00:00 2001
-From: popcornmix <popcornmix@gmail.com>
-Date: Sun, 12 May 2013 12:24:19 +0100
-Subject: [PATCH] Main bcm2708/bcm2709 linux port
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: popcornmix <popcornmix@gmail.com>
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
-
-bcm2709: Drop platform smp and timer init code
-
-irq-bcm2836 handles this through these functions:
-bcm2835_init_local_timer_frequency()
-bcm2836_arm_irqchip_smp_init()
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
-
-bcm270x: Use watchdog for reboot/poweroff
-
-The watchdog driver already has support for reboot/poweroff.
-Make use of this and remove the code from the platform files.
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
-
-board_bcm2835: Remove coherent dma pool increase - API has gone
----
- arch/arm/mach-bcm/Kconfig         |  1 +
- arch/arm/mm/proc-v6.S             | 15 ++++++++++++---
- drivers/irqchip/irq-bcm2835.c     |  7 ++++++-
- drivers/mailbox/bcm2835-mailbox.c | 18 ++++++++++++++++--
- 4 files changed, 35 insertions(+), 6 deletions(-)
-
---- a/arch/arm/mach-bcm/Kconfig
-+++ b/arch/arm/mach-bcm/Kconfig
-@@ -168,6 +168,7 @@ config ARCH_BCM2835
- 	select FIQ
- 	select PINCTRL
- 	select PINCTRL_BCM2835
-+	select MFD_SYSCON if ARCH_MULTI_V7
- 	help
- 	  This enables support for the Broadcom BCM2835 and BCM2836 SoCs.
- 	  This SoC is used in the Raspberry Pi and Roku 2 devices.
---- a/arch/arm/mm/proc-v6.S
-+++ b/arch/arm/mm/proc-v6.S
-@@ -73,10 +73,19 @@ ENDPROC(cpu_v6_reset)
-  *
-  *	IRQs are already disabled.
-  */
-+
-+/* See jira SW-5991 for details of this workaround */
- ENTRY(cpu_v6_do_idle)
--	mov	r1, #0
--	mcr	p15, 0, r1, c7, c10, 4		@ DWB - WFI may enter a low-power mode
--	mcr	p15, 0, r1, c7, c0, 4		@ wait for interrupt
-+	.align 5
-+	mov     r1, #2
-+1:	subs	r1, #1
-+	nop
-+	mcreq	p15, 0, r1, c7, c10, 4		@ DWB - WFI may enter a low-power mode
-+	mcreq	p15, 0, r1, c7, c0, 4		@ wait for interrupt
-+	nop
-+	nop
-+	nop
-+	bne 1b
- 	ret	lr
- 
- ENTRY(cpu_v6_dcache_clean_area)
---- a/drivers/irqchip/irq-bcm2835.c
-+++ b/drivers/irqchip/irq-bcm2835.c
-@@ -52,7 +52,9 @@
- #include <linux/irqdomain.h>
- 
- #include <asm/exception.h>
-+#ifndef CONFIG_ARM64
- #include <asm/mach/irq.h>
-+#endif
- 
- /* Put the bank and irq (32 bits) into the hwirq */
- #define MAKE_HWIRQ(b, n)	(((b) << 5) | (n))
-@@ -80,6 +82,7 @@
- #define NR_BANKS		3
- #define IRQS_PER_BANK		32
- #define NUMBER_IRQS		MAKE_HWIRQ(NR_BANKS, 0)
-+#undef FIQ_START
- #define FIQ_START		(NR_IRQS_BANK0 + MAKE_HWIRQ(NR_BANKS - 1, 0))
- 
- static const int reg_pending[] __initconst = { 0x00, 0x04, 0x08 };
-@@ -247,10 +250,12 @@ static int __init armctrl_of_init(struct
- 					MAKE_HWIRQ(b, i) + NUMBER_IRQS);
- 			BUG_ON(irq <= 0);
- 			irq_set_chip(irq, &armctrl_chip);
--			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-+			irq_set_probe(irq);
- 		}
- 	}
-+#ifndef CONFIG_ARM64
- 	init_FIQ(FIQ_START);
-+#endif
- 
- 	return 0;
- }
---- a/drivers/mailbox/bcm2835-mailbox.c
-+++ b/drivers/mailbox/bcm2835-mailbox.c
-@@ -51,12 +51,15 @@
- #define MAIL1_WRT	(ARM_0_MAIL1 + 0x00)
- #define MAIL1_STA	(ARM_0_MAIL1 + 0x18)
- 
-+/* On ARCH_BCM270x these come through <linux/interrupt.h> (arm_control.h ) */
-+#ifndef ARM_MS_FULL
- /* Status register: FIFO state. */
- #define ARM_MS_FULL		BIT(31)
- #define ARM_MS_EMPTY		BIT(30)
- 
- /* Configuration register: Enable interrupts. */
- #define ARM_MC_IHAVEDATAIRQEN	BIT(0)
-+#endif
- 
- struct bcm2835_mbox {
- 	void __iomem *regs;
-@@ -151,7 +154,7 @@ static int bcm2835_mbox_probe(struct pla
- 		return -ENOMEM;
- 	spin_lock_init(&mbox->lock);
- 
--	ret = devm_request_irq(dev, irq_of_parse_and_map(dev->of_node, 0),
-+	ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
- 			       bcm2835_mbox_irq, 0, dev_name(dev), mbox);
- 	if (ret) {
- 		dev_err(dev, "Failed to register a mailbox IRQ handler: %d\n",
-@@ -209,7 +212,18 @@ static struct platform_driver bcm2835_mb
- 	.probe		= bcm2835_mbox_probe,
- 	.remove		= bcm2835_mbox_remove,
- };
--module_platform_driver(bcm2835_mbox_driver);
-+
-+static int __init bcm2835_mbox_init(void)
-+{
-+	return platform_driver_register(&bcm2835_mbox_driver);
-+}
-+arch_initcall(bcm2835_mbox_init);
-+
-+static void __init bcm2835_mbox_exit(void)
-+{
-+	platform_driver_unregister(&bcm2835_mbox_driver);
-+}
-+module_exit(bcm2835_mbox_exit);
- 
- MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
- MODULE_DESCRIPTION("BCM2835 mailbox IPC driver");

target/linux/bcm27xx/patches-4.19/950-0041-Speed-up-console-framebuffer-imageblit-function.patch

@@ -1,209 +0,0 @@
-From f4489532d7a73ded68e1b8a815a71b0fe25e9e21 Mon Sep 17 00:00:00 2001
-From: Harm Hanemaaijer <fgenfb@yahoo.com>
-Date: Thu, 20 Jun 2013 20:21:39 +0200
-Subject: [PATCH] Speed up console framebuffer imageblit function
-
-Especially on platforms with a slower CPU but a relatively high
-framebuffer fill bandwidth, like current ARM devices, the existing
-console monochrome imageblit function used to draw console text is
-suboptimal for common pixel depths such as 16bpp and 32bpp. The existing
-code is quite general and can deal with several pixel depths. By creating
-special case functions for 16bpp and 32bpp, by far the most common pixel
-formats used on modern systems, a significant speed-up is attained
-which can be readily felt on ARM-based devices like the Raspberry Pi
-and the Allwinner platform, but should help any platform using the
-fb layer.
-
-The special case functions allow constant folding, eliminating a number
-of instructions including divide operations, and allow the use of an
-unrolled loop, eliminating instructions with a variable shift size,
-reducing source memory access instructions, and eliminating excessive
-branching. These unrolled loops also allow much better code optimization
-by the C compiler. The code that selects which optimized variant is used
-is also simplified, eliminating integer divide instructions.
-
-The speed-up, measured by timing 'cat file.txt' in the console, varies
-between 40% and 70%, when testing on the Raspberry Pi and Allwinner
-ARM-based platforms, depending on font size and the pixel depth, with
-the greater benefit for 32bpp.
-
-Signed-off-by: Harm Hanemaaijer <fgenfb@yahoo.com>
----
- drivers/video/fbdev/core/cfbimgblt.c | 152 ++++++++++++++++++++++++++-
- 1 file changed, 147 insertions(+), 5 deletions(-)
-
---- a/drivers/video/fbdev/core/cfbimgblt.c
-+++ b/drivers/video/fbdev/core/cfbimgblt.c
-@@ -28,6 +28,11 @@
-  *
-  *  Also need to add code to deal with cards endians that are different than
-  *  the native cpu endians. I also need to deal with MSB position in the word.
-+ *  Modified by Harm Hanemaaijer (fgenfb@yahoo.com) 2013:
-+ *  - Provide optimized versions of fast_imageblit for 16 and 32bpp that are
-+ *    significantly faster than the previous implementation.
-+ *  - Simplify the fast/slow_imageblit selection code, avoiding integer
-+ *    divides.
-  */
- #include <linux/module.h>
- #include <linux/string.h>
-@@ -262,6 +267,133 @@ static inline void fast_imageblit(const
- 	}
- }	
- 	
-+/*
-+ * Optimized fast_imageblit for bpp == 16. ppw = 2, bit_mask = 3 folded
-+ * into the code, main loop unrolled.
-+ */
-+
-+static inline void fast_imageblit16(const struct fb_image *image,
-+				    struct fb_info *p, u8 __iomem * dst1,
-+				    u32 fgcolor, u32 bgcolor)
-+{
-+	u32 fgx = fgcolor, bgx = bgcolor;
-+	u32 spitch = (image->width + 7) / 8;
-+	u32 end_mask, eorx;
-+	const char *s = image->data, *src;
-+	u32 __iomem *dst;
-+	const u32 *tab = NULL;
-+	int i, j, k;
-+
-+	tab = fb_be_math(p) ? cfb_tab16_be : cfb_tab16_le;
-+
-+	fgx <<= 16;
-+	bgx <<= 16;
-+	fgx |= fgcolor;
-+	bgx |= bgcolor;
-+
-+	eorx = fgx ^ bgx;
-+	k = image->width / 2;
-+
-+	for (i = image->height; i--;) {
-+		dst = (u32 __iomem *) dst1;
-+		src = s;
-+
-+		j = k;
-+		while (j >= 4) {
-+			u8 bits = *src;
-+			end_mask = tab[(bits >> 6) & 3];
-+			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
-+			end_mask = tab[(bits >> 4) & 3];
-+			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
-+			end_mask = tab[(bits >> 2) & 3];
-+			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
-+			end_mask = tab[bits & 3];
-+			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
-+			src++;
-+			j -= 4;
-+		}
-+		if (j != 0) {
-+			u8 bits = *src;
-+			end_mask = tab[(bits >> 6) & 3];
-+			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
-+			if (j >= 2) {
-+				end_mask = tab[(bits >> 4) & 3];
-+				FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
-+				if (j == 3) {
-+					end_mask = tab[(bits >> 2) & 3];
-+					FB_WRITEL((end_mask & eorx) ^ bgx, dst);
-+				}
-+			}
-+		}
-+		dst1 += p->fix.line_length;
-+		s += spitch;
-+	}
-+}
-+
-+/*
-+ * Optimized fast_imageblit for bpp == 32. ppw = 1, bit_mask = 1 folded
-+ * into the code, main loop unrolled.
-+ */
-+
-+static inline void fast_imageblit32(const struct fb_image *image,
-+				    struct fb_info *p, u8 __iomem * dst1,
-+				    u32 fgcolor, u32 bgcolor)
-+{
-+	u32 fgx = fgcolor, bgx = bgcolor;
-+	u32 spitch = (image->width + 7) / 8;
-+	u32 end_mask, eorx;
-+	const char *s = image->data, *src;
-+	u32 __iomem *dst;
-+	const u32 *tab = NULL;
-+	int i, j, k;
-+
-+	tab = cfb_tab32;
-+
-+	eorx = fgx ^ bgx;
-+	k = image->width;
-+
-+	for (i = image->height; i--;) {
-+		dst = (u32 __iomem *) dst1;
-+		src = s;
-+
-+		j = k;
-+		while (j >= 8) {
-+			u8 bits = *src;
-+			end_mask = tab[(bits >> 7) & 1];
-+			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
-+			end_mask = tab[(bits >> 6) & 1];
-+			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
-+			end_mask = tab[(bits >> 5) & 1];
-+			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
-+			end_mask = tab[(bits >> 4) & 1];
-+			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
-+			end_mask = tab[(bits >> 3) & 1];
-+			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
-+			end_mask = tab[(bits >> 2) & 1];
-+			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
-+			end_mask = tab[(bits >> 1) & 1];
-+			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
-+			end_mask = tab[bits & 1];
-+			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
-+			src++;
-+			j -= 8;
-+		}
-+		if (j != 0) {
-+			u32 bits = (u32) * src;
-+			while (j > 1) {
-+				end_mask = tab[(bits >> 7) & 1];
-+				FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
-+				bits <<= 1;
-+				j--;
-+			}
-+			end_mask = tab[(bits >> 7) & 1];
-+			FB_WRITEL((end_mask & eorx) ^ bgx, dst);
-+		}
-+		dst1 += p->fix.line_length;
-+		s += spitch;
-+	}
-+}
-+
- void cfb_imageblit(struct fb_info *p, const struct fb_image *image)
- {
- 	u32 fgcolor, bgcolor, start_index, bitstart, pitch_index = 0;
-@@ -294,11 +426,21 @@ void cfb_imageblit(struct fb_info *p, co
- 			bgcolor = image->bg_color;
- 		}	
- 		
--		if (32 % bpp == 0 && !start_index && !pitch_index && 
--		    ((width & (32/bpp-1)) == 0) &&
--		    bpp >= 8 && bpp <= 32) 			
--			fast_imageblit(image, p, dst1, fgcolor, bgcolor);
--		else 
-+		if (!start_index && !pitch_index) {
-+			if (bpp == 32)
-+				fast_imageblit32(image, p, dst1, fgcolor,
-+						 bgcolor);
-+			else if (bpp == 16 && (width & 1) == 0)
-+				fast_imageblit16(image, p, dst1, fgcolor,
-+						 bgcolor);
-+			else if (bpp == 8 && (width & 3) == 0)
-+				fast_imageblit(image, p, dst1, fgcolor,
-+					       bgcolor);
-+			else
-+				slow_imageblit(image, p, dst1, fgcolor,
-+					       bgcolor,
-+					       start_index, pitch_index);
-+		} else
- 			slow_imageblit(image, p, dst1, fgcolor, bgcolor,
- 					start_index, pitch_index);
- 	} else

target/linux/bcm27xx/patches-4.19/950-0042-dmaengine-Add-support-for-BCM2708.patch

@@ -1,640 +0,0 @@
-From 9405d98a5b9ad11e9be2dc1247de3e26896a00d9 Mon Sep 17 00:00:00 2001
-From: Florian Meier <florian.meier@koalo.de>
-Date: Fri, 22 Nov 2013 14:22:53 +0100
-Subject: [PATCH] dmaengine: Add support for BCM2708
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add support for DMA controller of BCM2708 as used in the Raspberry Pi.
-Currently it only supports cyclic DMA.
-
-Signed-off-by: Florian Meier <florian.meier@koalo.de>
-
-dmaengine: expand functionality by supporting scatter/gather transfers sdhci-bcm2708 and dma.c: fix for LITE channels
-
-DMA: fix cyclic LITE length overflow bug
-
-dmaengine: bcm2708: Remove chancnt affectations
-
-Mirror bcm2835-dma.c commit 9eba5536a7434c69d8c185d4bd1c70734d92287d:
-chancnt is already filled by dma_async_device_register, which uses the channel
-list to know how much channels there is.
-
-Since it's already filled, we can safely remove it from the drivers' probe
-function.
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
-
-dmaengine: bcm2708: overwrite dreq only if it is not set
-
-dreq is set when the DMA channel is fetched from Device Tree.
-slave_id is set using dmaengine_slave_config().
-Only overwrite dreq with slave_id if it is not set.
-
-dreq/slave_id in the cyclic DMA case is not touched, because I don't
-have hardware to test with.
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
-
-dmaengine: bcm2708: do device registration in the board file
-
-Don't register the device in the driver. Do it in the board file.
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
-
-dmaengine: bcm2708: don't restrict DT support to ARCH_BCM2835
-
-Both ARCH_BCM2835 and ARCH_BCM270x are built with OF now.
-Add Device Tree support to the non ARCH_BCM2835 case.
-Use the same driver name regardless of architecture.
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
-
-BCM270x_DT: add bcm2835-dma entry
-
-Add Device Tree entry for bcm2835-dma.
-The entry doesn't contain any resources since they are handled
-by the arch/arm/mach-bcm270x/dma.c driver.
-In non-DT mode, don't add the device in the board file.
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
-
-bcm2708-dmaengine: Add debug options
-
-BCM270x: Add memory and irq resources to dmaengine device and DT
-
-Prepare for merging of the legacy DMA API arch driver dma.c
-with bcm2708-dmaengine by adding memory and irq resources both
-to platform file device and Device Tree node.
-Don't use BCM_DMAMAN_DRIVER_NAME so we don't have to include mach/dma.h
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
-
-dmaengine: bcm2708: Merge with arch dma.c driver and disable dma.c
-
-Merge the legacy DMA API driver with bcm2708-dmaengine.
-This is done so we can use bcm2708_fb on ARCH_BCM2835 (mailbox
-driver is also needed).
-
-Changes to the dma.c code:
-- Use BIT() macro.
-- Cutdown some comments to one line.
-- Add mutex to vc_dmaman and use this, since the dev lock is locked
-  during probing of the engine part.
-- Add global g_dmaman variable since drvdata is used by the engine part.
-- Restructure for readability:
-  vc_dmaman_chan_alloc()
-  vc_dmaman_chan_free()
-  bcm_dma_chan_free()
-- Restructure bcm_dma_chan_alloc() to simplify error handling.
-- Use device irq resources instead of hardcoded bcm_dma_irqs table.
-- Remove dev_dmaman_register() and code it directly.
-- Remove dev_dmaman_deregister() and code it directly.
-- Simplify bcm_dmaman_probe() using devm_* functions.
-- Get dmachans from DT if available.
-- Keep 'dma.dmachans' module argument name for backwards compatibility.
-
-Make it available on ARCH_BCM2835 as well.
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
-
-dmaengine: bcm2708: set residue_granularity field
-
-bcm2708-dmaengine supports residue reporting at burst level
-but didn't report this via the residue_granularity field.
-
-Without this field set properly we get playback issues with I2S cards.
-
-dmaengine: bcm2708-dmaengine: Fix memory leak when stopping a running transfer
-
-bcm2708-dmaengine: Use more DMA channels (but not 12)
-
-1) Only the bcm2708_fb drivers uses the legacy DMA API, and
-it requires a BULK-capable channel, so all other types
-(FAST, NORMAL and LITE) can be made available to the regular
-DMA API.
-
-2) DMA channels 11-14 share an interrupt. The driver can't
-handle this, so don't use channels 12-14 (12 was used, probably
-because it appears to have an interrupt, but in reality that
-interrupt is for activity on ANY channel). This may explain
-a lockup encountered when running out of DMA channels.
-
-The combined effect of this patch is to leave 7 DMA channels
-available + channel 0 for bcm2708_fb via the legacy API.
-
-See: https://github.com/raspberrypi/linux/issues/1110
-     https://github.com/raspberrypi/linux/issues/1108
-
-dmaengine: bcm2708: Make legacy API available for bcm2835-dma
-
-bcm2708_fb uses the legacy DMA API, so in order to start using
-bcm2835-dma, bcm2835-dma has to support the legacy API. Make this
-possible by exporting bcm_dmaman_probe() and bcm_dmaman_remove().
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
-
-dmaengine: bcm2708: Change DT compatible string
-
-Both bcm2835-dma and bcm2708-dmaengine have the same compatible string.
-So change compatible to "brcm,bcm2708-dma".
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
-
-dmaengine: bcm2708: Remove driver but keep legacy API
-
-Dropping non-DT support means we don't need this driver,
-but we still need the legacy DMA API.
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
-
-bcm2708-dmaengine - Fix arm64 portability/build issues
-
-dma-bcm2708: Fix module compilation of CONFIG_DMA_BCM2708
-
-bcm2708-dmaengine.c defines functions like bcm_dma_start which are
-defined as well in dma-bcm2708.h as inline versions when
-CONFIG_DMA_BCM2708 is not defined. This works fine when
-CONFIG_DMA_BCM2708 is built in, but when it is selected as module build
-fails with redefinition errors because in the build system when
-CONFIG_DMA_BCM2708 is selected as module, the macro becomes
-CONFIG_DMA_BCM2708_MODULE.
-
-This patch makes the header use CONFIG_DMA_BCM2708_MODULE too when
-available.
-
-Fixes https://github.com/raspberrypi/linux/issues/2056
-
-Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
----
- drivers/dma/Kconfig                       |   6 +-
- drivers/dma/Makefile                      |   1 +
- drivers/dma/bcm2708-dmaengine.c           | 281 ++++++++++++++++++++++
- include/linux/platform_data/dma-bcm2708.h | 143 +++++++++++
- 4 files changed, 430 insertions(+), 1 deletion(-)
- create mode 100644 drivers/dma/bcm2708-dmaengine.c
- create mode 100644 include/linux/platform_data/dma-bcm2708.h
-
---- a/drivers/dma/Kconfig
-+++ b/drivers/dma/Kconfig
-@@ -131,7 +131,7 @@ config COH901318
- 
- config DMA_BCM2835
- 	tristate "BCM2835 DMA engine support"
--	depends on ARCH_BCM2835 || ARCH_BCM2708 || ARCH_BCM2709
-+	depends on ARCH_BCM2835
- 	select DMA_ENGINE
- 	select DMA_VIRTUAL_CHANNELS
- 
-@@ -576,6 +576,10 @@ config TIMB_DMA
- 	help
- 	  Enable support for the Timberdale FPGA DMA engine.
- 
-+config DMA_BCM2708
-+	tristate "BCM2708 DMA legacy API support"
-+	depends on DMA_BCM2835
-+
- config XGENE_DMA
- 	tristate "APM X-Gene DMA support"
- 	depends on ARCH_XGENE || COMPILE_TEST
---- a/drivers/dma/Makefile
-+++ b/drivers/dma/Makefile
-@@ -21,6 +21,7 @@ obj-$(CONFIG_AT_XDMAC) += at_xdmac.o
- obj-$(CONFIG_AXI_DMAC) += dma-axi-dmac.o
- obj-$(CONFIG_BCM_SBA_RAID) += bcm-sba-raid.o
- obj-$(CONFIG_COH901318) += coh901318.o coh901318_lli.o
-+obj-$(CONFIG_DMA_BCM2708) += bcm2708-dmaengine.o
- obj-$(CONFIG_DMA_BCM2835) += bcm2835-dma.o
- obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o
- obj-$(CONFIG_DMA_JZ4780) += dma-jz4780.o
---- /dev/null
-+++ b/drivers/dma/bcm2708-dmaengine.c
-@@ -0,0 +1,281 @@
-+/*
-+ * BCM2708 legacy DMA API
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/list.h>
-+#include <linux/module.h>
-+#include <linux/platform_data/dma-bcm2708.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/io.h>
-+#include <linux/spinlock.h>
-+
-+#include "virt-dma.h"
-+
-+#define CACHE_LINE_MASK 31
-+#define DEFAULT_DMACHAN_BITMAP 0x10  /* channel 4 only */
-+
-+/* valid only for channels 0 - 14, 15 has its own base address */
-+#define BCM2708_DMA_CHAN(n)	((n) << 8) /* base address */
-+#define BCM2708_DMA_CHANIO(dma_base, n) \
-+	((void __iomem *)((char *)(dma_base) + BCM2708_DMA_CHAN(n)))
-+
-+struct vc_dmaman {
-+	void __iomem *dma_base;
-+	u32 chan_available; /* bitmap of available channels */
-+	u32 has_feature[BCM_DMA_FEATURE_COUNT]; /* bitmap of feature presence */
-+	struct mutex lock;
-+};
-+
-+static struct device *dmaman_dev;	/* we assume there's only one! */
-+static struct vc_dmaman *g_dmaman;	/* DMA manager */
-+
-+/* DMA Auxiliary Functions */
-+
-+/* A DMA buffer on an arbitrary boundary may separate a cache line into a
-+   section inside the DMA buffer and another section outside it.
-+   Even if we flush DMA buffers from the cache there is always the chance that
-+   during a DMA someone will access the part of a cache line that is outside
-+   the DMA buffer - which will then bring in unwelcome data.
-+   Without being able to dictate our own buffer pools we must insist that
-+   DMA buffers consist of a whole number of cache lines.
-+*/
-+extern int bcm_sg_suitable_for_dma(struct scatterlist *sg_ptr, int sg_len)
-+{
-+	int i;
-+
-+	for (i = 0; i < sg_len; i++) {
-+		if (sg_ptr[i].offset & CACHE_LINE_MASK ||
-+		    sg_ptr[i].length & CACHE_LINE_MASK)
-+			return 0;
-+	}
-+
-+	return 1;
-+}
-+EXPORT_SYMBOL_GPL(bcm_sg_suitable_for_dma);
-+
-+extern void bcm_dma_start(void __iomem *dma_chan_base,
-+			  dma_addr_t control_block)
-+{
-+	dsb(sy);	/* ARM data synchronization (push) operation */
-+
-+	writel(control_block, dma_chan_base + BCM2708_DMA_ADDR);
-+	writel(BCM2708_DMA_ACTIVE, dma_chan_base + BCM2708_DMA_CS);
-+}
-+EXPORT_SYMBOL_GPL(bcm_dma_start);
-+
-+extern void bcm_dma_wait_idle(void __iomem *dma_chan_base)
-+{
-+	dsb(sy);
-+
-+	/* ugly busy wait only option for now */
-+	while (readl(dma_chan_base + BCM2708_DMA_CS) & BCM2708_DMA_ACTIVE)
-+		cpu_relax();
-+}
-+EXPORT_SYMBOL_GPL(bcm_dma_wait_idle);
-+
-+extern bool bcm_dma_is_busy(void __iomem *dma_chan_base)
-+{
-+	dsb(sy);
-+
-+	return readl(dma_chan_base + BCM2708_DMA_CS) & BCM2708_DMA_ACTIVE;
-+}
-+EXPORT_SYMBOL_GPL(bcm_dma_is_busy);
-+
-+/* Complete an ongoing DMA (assuming its results are to be ignored)
-+   Does nothing if there is no DMA in progress.
-+   This routine waits for the current AXI transfer to complete before
-+   terminating the current DMA. If the current transfer is hung on a DREQ used
-+   by an uncooperative peripheral the AXI transfer may never complete.	In this
-+   case the routine times out and return a non-zero error code.
-+   Use of this routine doesn't guarantee that the ongoing or aborted DMA
-+   does not produce an interrupt.
-+*/
-+extern int bcm_dma_abort(void __iomem *dma_chan_base)
-+{
-+	unsigned long int cs;
-+	int rc = 0;
-+
-+	cs = readl(dma_chan_base + BCM2708_DMA_CS);
-+
-+	if (BCM2708_DMA_ACTIVE & cs) {
-+		long int timeout = 10000;
-+
-+		/* write 0 to the active bit - pause the DMA */
-+		writel(0, dma_chan_base + BCM2708_DMA_CS);
-+
-+		/* wait for any current AXI transfer to complete */
-+		while (0 != (cs & BCM2708_DMA_ISPAUSED) && --timeout >= 0)
-+			cs = readl(dma_chan_base + BCM2708_DMA_CS);
-+
-+		if (0 != (cs & BCM2708_DMA_ISPAUSED)) {
-+			/* we'll un-pause when we set of our next DMA */
-+			rc = -ETIMEDOUT;
-+
-+		} else if (BCM2708_DMA_ACTIVE & cs) {
-+			/* terminate the control block chain */
-+			writel(0, dma_chan_base + BCM2708_DMA_NEXTCB);
-+
-+			/* abort the whole DMA */
-+			writel(BCM2708_DMA_ABORT | BCM2708_DMA_ACTIVE,
-+			       dma_chan_base + BCM2708_DMA_CS);
-+		}
-+	}
-+
-+	return rc;
-+}
-+EXPORT_SYMBOL_GPL(bcm_dma_abort);
-+
-+ /* DMA Manager Device Methods */
-+
-+static void vc_dmaman_init(struct vc_dmaman *dmaman, void __iomem *dma_base,
-+			   u32 chans_available)
-+{
-+	dmaman->dma_base = dma_base;
-+	dmaman->chan_available = chans_available;
-+	dmaman->has_feature[BCM_DMA_FEATURE_FAST_ORD] = 0x0c;  /* 2 & 3 */
-+	dmaman->has_feature[BCM_DMA_FEATURE_BULK_ORD] = 0x01;  /* 0 */
-+	dmaman->has_feature[BCM_DMA_FEATURE_NORMAL_ORD] = 0xfe;  /* 1 to 7 */
-+	dmaman->has_feature[BCM_DMA_FEATURE_LITE_ORD] = 0x7f00;  /* 8 to 14 */
-+}
-+
-+static int vc_dmaman_chan_alloc(struct vc_dmaman *dmaman,
-+				unsigned required_feature_set)
-+{
-+	u32 chans;
-+	int chan = 0;
-+	int feature;
-+
-+	chans = dmaman->chan_available;
-+	for (feature = 0; feature < BCM_DMA_FEATURE_COUNT; feature++)
-+		/* select the subset of available channels with the desired
-+		   features */
-+		if (required_feature_set & (1 << feature))
-+			chans &= dmaman->has_feature[feature];
-+
-+	if (!chans)
-+		return -ENOENT;
-+
-+	/* return the ordinal of the first channel in the bitmap */
-+	while (chans != 0 && (chans & 1) == 0) {
-+		chans >>= 1;
-+		chan++;
-+	}
-+	/* claim the channel */
-+	dmaman->chan_available &= ~(1 << chan);
-+
-+	return chan;
-+}
-+
-+static int vc_dmaman_chan_free(struct vc_dmaman *dmaman, int chan)
-+{
-+	if (chan < 0)
-+		return -EINVAL;
-+
-+	if ((1 << chan) & dmaman->chan_available)
-+		return -EIDRM;
-+
-+	dmaman->chan_available |= (1 << chan);
-+
-+	return 0;
-+}
-+
-+/* DMA Manager Monitor */
-+
-+extern int bcm_dma_chan_alloc(unsigned required_feature_set,
-+			      void __iomem **out_dma_base, int *out_dma_irq)
-+{
-+	struct vc_dmaman *dmaman = g_dmaman;
-+	struct platform_device *pdev = to_platform_device(dmaman_dev);
-+	struct resource *r;
-+	int chan;
-+
-+	if (!dmaman_dev)
-+		return -ENODEV;
-+
-+	mutex_lock(&dmaman->lock);
-+	chan = vc_dmaman_chan_alloc(dmaman, required_feature_set);
-+	if (chan < 0)
-+		goto out;
-+
-+	r = platform_get_resource(pdev, IORESOURCE_IRQ, (unsigned int)chan);
-+	if (!r) {
-+		dev_err(dmaman_dev, "failed to get irq for DMA channel %d\n",
-+			chan);
-+		vc_dmaman_chan_free(dmaman, chan);
-+		chan = -ENOENT;
-+		goto out;
-+	}
-+
-+	*out_dma_base = BCM2708_DMA_CHANIO(dmaman->dma_base, chan);
-+	*out_dma_irq = r->start;
-+	dev_dbg(dmaman_dev,
-+		"Legacy API allocated channel=%d, base=%p, irq=%i\n",
-+		chan, *out_dma_base, *out_dma_irq);
-+
-+out:
-+	mutex_unlock(&dmaman->lock);
-+
-+	return chan;
-+}
-+EXPORT_SYMBOL_GPL(bcm_dma_chan_alloc);
-+
-+extern int bcm_dma_chan_free(int channel)
-+{
-+	struct vc_dmaman *dmaman = g_dmaman;
-+	int rc;
-+
-+	if (!dmaman_dev)
-+		return -ENODEV;
-+
-+	mutex_lock(&dmaman->lock);
-+	rc = vc_dmaman_chan_free(dmaman, channel);
-+	mutex_unlock(&dmaman->lock);
-+
-+	return rc;
-+}
-+EXPORT_SYMBOL_GPL(bcm_dma_chan_free);
-+
-+int bcm_dmaman_probe(struct platform_device *pdev, void __iomem *base,
-+		     u32 chans_available)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct vc_dmaman *dmaman;
-+
-+	dmaman = devm_kzalloc(dev, sizeof(*dmaman), GFP_KERNEL);
-+	if (!dmaman)
-+		return -ENOMEM;
-+
-+	mutex_init(&dmaman->lock);
-+	vc_dmaman_init(dmaman, base, chans_available);
-+	g_dmaman = dmaman;
-+	dmaman_dev = dev;
-+
-+	dev_info(dev, "DMA legacy API manager at %p, dmachans=0x%x\n",
-+		 base, chans_available);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(bcm_dmaman_probe);
-+
-+int bcm_dmaman_remove(struct platform_device *pdev)
-+{
-+	dmaman_dev = NULL;
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(bcm_dmaman_remove);
-+
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/include/linux/platform_data/dma-bcm2708.h
-@@ -0,0 +1,143 @@
-+/*
-+ *  Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef _PLAT_BCM2708_DMA_H
-+#define _PLAT_BCM2708_DMA_H
-+
-+/* DMA CS Control and Status bits */
-+#define BCM2708_DMA_ACTIVE	BIT(0)
-+#define BCM2708_DMA_INT		BIT(2)
-+#define BCM2708_DMA_ISPAUSED	BIT(4)  /* Pause requested or not active */
-+#define BCM2708_DMA_ISHELD	BIT(5)  /* Is held by DREQ flow control */
-+#define BCM2708_DMA_ERR		BIT(8)
-+#define BCM2708_DMA_ABORT	BIT(30) /* stop current CB, go to next, WO */
-+#define BCM2708_DMA_RESET	BIT(31) /* WO, self clearing */
-+
-+/* DMA control block "info" field bits */
-+#define BCM2708_DMA_INT_EN	BIT(0)
-+#define BCM2708_DMA_TDMODE	BIT(1)
-+#define BCM2708_DMA_WAIT_RESP	BIT(3)
-+#define BCM2708_DMA_D_INC	BIT(4)
-+#define BCM2708_DMA_D_WIDTH	BIT(5)
-+#define BCM2708_DMA_D_DREQ	BIT(6)
-+#define BCM2708_DMA_S_INC	BIT(8)
-+#define BCM2708_DMA_S_WIDTH	BIT(9)
-+#define BCM2708_DMA_S_DREQ	BIT(10)
-+
-+#define	BCM2708_DMA_BURST(x)	(((x) & 0xf) << 12)
-+#define	BCM2708_DMA_PER_MAP(x)	((x) << 16)
-+#define	BCM2708_DMA_WAITS(x)	(((x) & 0x1f) << 21)
-+
-+#define BCM2708_DMA_DREQ_EMMC	11
-+#define BCM2708_DMA_DREQ_SDHOST	13
-+
-+#define BCM2708_DMA_CS		0x00 /* Control and Status */
-+#define BCM2708_DMA_ADDR	0x04
-+/* the current control block appears in the following registers - read only */
-+#define BCM2708_DMA_INFO	0x08
-+#define BCM2708_DMA_SOURCE_AD	0x0c
-+#define BCM2708_DMA_DEST_AD	0x10
-+#define BCM2708_DMA_NEXTCB	0x1C
-+#define BCM2708_DMA_DEBUG	0x20
-+
-+#define BCM2708_DMA4_CS		(BCM2708_DMA_CHAN(4) + BCM2708_DMA_CS)
-+#define BCM2708_DMA4_ADDR	(BCM2708_DMA_CHAN(4) + BCM2708_DMA_ADDR)
-+
-+#define BCM2708_DMA_TDMODE_LEN(w, h) ((h) << 16 | (w))
-+
-+/* When listing features we can ask for when allocating DMA channels give
-+   those with higher priority smaller ordinal numbers */
-+#define BCM_DMA_FEATURE_FAST_ORD	0
-+#define BCM_DMA_FEATURE_BULK_ORD	1
-+#define BCM_DMA_FEATURE_NORMAL_ORD	2
-+#define BCM_DMA_FEATURE_LITE_ORD	3
-+#define BCM_DMA_FEATURE_FAST		BIT(BCM_DMA_FEATURE_FAST_ORD)
-+#define BCM_DMA_FEATURE_BULK		BIT(BCM_DMA_FEATURE_BULK_ORD)
-+#define BCM_DMA_FEATURE_NORMAL		BIT(BCM_DMA_FEATURE_NORMAL_ORD)
-+#define BCM_DMA_FEATURE_LITE		BIT(BCM_DMA_FEATURE_LITE_ORD)
-+#define BCM_DMA_FEATURE_COUNT		4
-+
-+struct bcm2708_dma_cb {
-+	u32 info;
-+	u32 src;
-+	u32 dst;
-+	u32 length;
-+	u32 stride;
-+	u32 next;
-+	u32 pad[2];
-+};
-+
-+struct scatterlist;
-+struct platform_device;
-+
-+#if defined(CONFIG_DMA_BCM2708) || defined(CONFIG_DMA_BCM2708_MODULE)
-+
-+int bcm_sg_suitable_for_dma(struct scatterlist *sg_ptr, int sg_len);
-+void bcm_dma_start(void __iomem *dma_chan_base, dma_addr_t control_block);
-+void bcm_dma_wait_idle(void __iomem *dma_chan_base);
-+bool bcm_dma_is_busy(void __iomem *dma_chan_base);
-+int bcm_dma_abort(void __iomem *dma_chan_base);
-+
-+/* return channel no or -ve error */
-+int bcm_dma_chan_alloc(unsigned preferred_feature_set,
-+		       void __iomem **out_dma_base, int *out_dma_irq);
-+int bcm_dma_chan_free(int channel);
-+
-+int bcm_dmaman_probe(struct platform_device *pdev, void __iomem *base,
-+		     u32 chans_available);
-+int bcm_dmaman_remove(struct platform_device *pdev);
-+
-+#else /* CONFIG_DMA_BCM2708 */
-+
-+static inline int bcm_sg_suitable_for_dma(struct scatterlist *sg_ptr,
-+					  int sg_len)
-+{
-+	return 0;
-+}
-+
-+static inline void bcm_dma_start(void __iomem *dma_chan_base,
-+				 dma_addr_t control_block) { }
-+
-+static inline void bcm_dma_wait_idle(void __iomem *dma_chan_base) { }
-+
-+static inline bool bcm_dma_is_busy(void __iomem *dma_chan_base)
-+{
-+	return false;
-+}
-+
-+static inline int bcm_dma_abort(void __iomem *dma_chan_base)
-+{
-+	return -EINVAL;
-+}
-+
-+static inline int bcm_dma_chan_alloc(unsigned preferred_feature_set,
-+				     void __iomem **out_dma_base,
-+				     int *out_dma_irq)
-+{
-+	return -EINVAL;
-+}
-+
-+static inline int bcm_dma_chan_free(int channel)
-+{
-+	return -EINVAL;
-+}
-+
-+static inline int bcm_dmaman_probe(struct platform_device *pdev,
-+				   void __iomem *base, u32 chans_available)
-+{
-+	return 0;
-+}
-+
-+static inline int bcm_dmaman_remove(struct platform_device *pdev)
-+{
-+	return 0;
-+}
-+
-+#endif /* CONFIG_DMA_BCM2708 || CONFIG_DMA_BCM2708_MODULE */
-+
-+#endif /* _PLAT_BCM2708_DMA_H */

target/linux/bcm27xx/patches-4.19/950-0045-vc_mem-Add-vc_mem-driver-for-querying-firmware-memor.patch

@@ -1,515 +0,0 @@
-From cfdf39199781b73840dfdfb7d1281b398c1334cf Mon Sep 17 00:00:00 2001
-From: popcornmix <popcornmix@gmail.com>
-Date: Fri, 28 Oct 2016 15:36:43 +0100
-Subject: [PATCH] vc_mem: Add vc_mem driver for querying firmware
- memory addresses
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: popcornmix <popcornmix@gmail.com>
-
-BCM270x: Move vc_mem
-
-Make the vc_mem module available for ARCH_BCM2835 by moving it.
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
----
- drivers/char/broadcom/Kconfig   |  18 ++
- drivers/char/broadcom/Makefile  |   1 +
- drivers/char/broadcom/vc_mem.c  | 422 ++++++++++++++++++++++++++++++++
- include/linux/broadcom/vc_mem.h |  35 +++
- 4 files changed, 476 insertions(+)
- create mode 100644 drivers/char/broadcom/Kconfig
- create mode 100644 drivers/char/broadcom/Makefile
- create mode 100644 drivers/char/broadcom/vc_mem.c
- create mode 100644 include/linux/broadcom/vc_mem.h
-
---- /dev/null
-+++ b/drivers/char/broadcom/Kconfig
-@@ -0,0 +1,18 @@
-+#
-+# Broadcom char driver config
-+#
-+
-+menuconfig BRCM_CHAR_DRIVERS
-+	bool "Broadcom Char Drivers"
-+	help
-+	  Broadcom's char drivers
-+
-+if BRCM_CHAR_DRIVERS
-+
-+config BCM2708_VCMEM
-+	bool "Videocore Memory"
-+        default y
-+        help
-+          Helper for videocore memory access and total size allocation.
-+
-+endif
---- /dev/null
-+++ b/drivers/char/broadcom/Makefile
-@@ -0,0 +1 @@
-+obj-$(CONFIG_BCM2708_VCMEM)	+= vc_mem.o
---- /dev/null
-+++ b/drivers/char/broadcom/vc_mem.c
-@@ -0,0 +1,422 @@
-+/*****************************************************************************
-+* Copyright 2010 - 2011 Broadcom Corporation.  All rights reserved.
-+*
-+* Unless you and Broadcom execute a separate written software license
-+* agreement governing use of this software, this software is licensed to you
-+* under the terms of the GNU General Public License version 2, available at
-+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-+*
-+* Notwithstanding the above, under no circumstances may you combine this
-+* software in any way with any other Broadcom software provided under a
-+* license other than the GPL, without Broadcom's express prior written
-+* consent.
-+*****************************************************************************/
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/fs.h>
-+#include <linux/device.h>
-+#include <linux/cdev.h>
-+#include <linux/mm.h>
-+#include <linux/slab.h>
-+#include <linux/debugfs.h>
-+#include <linux/uaccess.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/broadcom/vc_mem.h>
-+
-+#define DRIVER_NAME  "vc-mem"
-+
-+// Device (/dev) related variables
-+static dev_t vc_mem_devnum = 0;
-+static struct class *vc_mem_class = NULL;
-+static struct cdev vc_mem_cdev;
-+static int vc_mem_inited = 0;
-+
-+#ifdef CONFIG_DEBUG_FS
-+static struct dentry *vc_mem_debugfs_entry;
-+#endif
-+
-+/*
-+ * Videocore memory addresses and size
-+ *
-+ * Drivers that wish to know the videocore memory addresses and sizes should
-+ * use these variables instead of the MM_IO_BASE and MM_ADDR_IO defines in
-+ * headers. This allows the other drivers to not be tied down to a a certain
-+ * address/size at compile time.
-+ *
-+ * In the future, the goal is to have the videocore memory virtual address and
-+ * size be calculated at boot time rather than at compile time. The decision of
-+ * where the videocore memory resides and its size would be in the hands of the
-+ * bootloader (and/or kernel). When that happens, the values of these variables
-+ * would be calculated and assigned in the init function.
-+ */
-+// in the 2835 VC in mapped above ARM, but ARM has full access to VC space
-+unsigned long mm_vc_mem_phys_addr = 0x00000000;
-+unsigned int mm_vc_mem_size = 0;
-+unsigned int mm_vc_mem_base = 0;
-+
-+EXPORT_SYMBOL(mm_vc_mem_phys_addr);
-+EXPORT_SYMBOL(mm_vc_mem_size);
-+EXPORT_SYMBOL(mm_vc_mem_base);
-+
-+static uint phys_addr = 0;
-+static uint mem_size = 0;
-+static uint mem_base = 0;
-+
-+
-+/****************************************************************************
-+*
-+*   vc_mem_open
-+*
-+***************************************************************************/
-+
-+static int
-+vc_mem_open(struct inode *inode, struct file *file)
-+{
-+	(void) inode;
-+	(void) file;
-+
-+	pr_debug("%s: called file = 0x%p\n", __func__, file);
-+
-+	return 0;
-+}
-+
-+/****************************************************************************
-+*
-+*   vc_mem_release
-+*
-+***************************************************************************/
-+
-+static int
-+vc_mem_release(struct inode *inode, struct file *file)
-+{
-+	(void) inode;
-+	(void) file;
-+
-+	pr_debug("%s: called file = 0x%p\n", __func__, file);
-+
-+	return 0;
-+}
-+
-+/****************************************************************************
-+*
-+*   vc_mem_get_size
-+*
-+***************************************************************************/
-+
-+static void
-+vc_mem_get_size(void)
-+{
-+}
-+
-+/****************************************************************************
-+*
-+*   vc_mem_get_base
-+*
-+***************************************************************************/
-+
-+static void
-+vc_mem_get_base(void)
-+{
-+}
-+
-+/****************************************************************************
-+*
-+*   vc_mem_get_current_size
-+*
-+***************************************************************************/
-+
-+int
-+vc_mem_get_current_size(void)
-+{
-+	return mm_vc_mem_size;
-+}
-+
-+EXPORT_SYMBOL_GPL(vc_mem_get_current_size);
-+
-+/****************************************************************************
-+*
-+*   vc_mem_ioctl
-+*
-+***************************************************************************/
-+
-+static long
-+vc_mem_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+	int rc = 0;
-+
-+	(void) cmd;
-+	(void) arg;
-+
-+	pr_debug("%s: called file = 0x%p\n", __func__, file);
-+
-+	switch (cmd) {
-+	case VC_MEM_IOC_MEM_PHYS_ADDR:
-+		{
-+			pr_debug("%s: VC_MEM_IOC_MEM_PHYS_ADDR=0x%p\n",
-+				__func__, (void *) mm_vc_mem_phys_addr);
-+
-+			if (copy_to_user((void *) arg, &mm_vc_mem_phys_addr,
-+					 sizeof (mm_vc_mem_phys_addr)) != 0) {
-+				rc = -EFAULT;
-+			}
-+			break;
-+		}
-+	case VC_MEM_IOC_MEM_SIZE:
-+		{
-+			// Get the videocore memory size first
-+			vc_mem_get_size();
-+
-+			pr_debug("%s: VC_MEM_IOC_MEM_SIZE=%u\n", __func__,
-+				mm_vc_mem_size);
-+
-+			if (copy_to_user((void *) arg, &mm_vc_mem_size,
-+					 sizeof (mm_vc_mem_size)) != 0) {
-+				rc = -EFAULT;
-+			}
-+			break;
-+		}
-+	case VC_MEM_IOC_MEM_BASE:
-+		{
-+			// Get the videocore memory base
-+			vc_mem_get_base();
-+
-+			pr_debug("%s: VC_MEM_IOC_MEM_BASE=%u\n", __func__,
-+				mm_vc_mem_base);
-+
-+			if (copy_to_user((void *) arg, &mm_vc_mem_base,
-+					 sizeof (mm_vc_mem_base)) != 0) {
-+				rc = -EFAULT;
-+			}
-+			break;
-+		}
-+	case VC_MEM_IOC_MEM_LOAD:
-+		{
-+			// Get the videocore memory base
-+			vc_mem_get_base();
-+
-+			pr_debug("%s: VC_MEM_IOC_MEM_LOAD=%u\n", __func__,
-+				mm_vc_mem_base);
-+
-+			if (copy_to_user((void *) arg, &mm_vc_mem_base,
-+					 sizeof (mm_vc_mem_base)) != 0) {
-+				rc = -EFAULT;
-+			}
-+			break;
-+		}
-+	default:
-+		{
-+			return -ENOTTY;
-+		}
-+	}
-+	pr_debug("%s: file = 0x%p returning %d\n", __func__, file, rc);
-+
-+	return rc;
-+}
-+
-+/****************************************************************************
-+*
-+*   vc_mem_mmap
-+*
-+***************************************************************************/
-+
-+static int
-+vc_mem_mmap(struct file *filp, struct vm_area_struct *vma)
-+{
-+	int rc = 0;
-+	unsigned long length = vma->vm_end - vma->vm_start;
-+	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
-+
-+	pr_debug("%s: vm_start = 0x%08lx vm_end = 0x%08lx vm_pgoff = 0x%08lx\n",
-+		__func__, (long) vma->vm_start, (long) vma->vm_end,
-+		(long) vma->vm_pgoff);
-+
-+	if (offset + length > mm_vc_mem_size) {
-+		pr_err("%s: length %ld is too big\n", __func__, length);
-+		return -EINVAL;
-+	}
-+	// Do not cache the memory map
-+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-+
-+	rc = remap_pfn_range(vma, vma->vm_start,
-+			     (mm_vc_mem_phys_addr >> PAGE_SHIFT) +
-+			     vma->vm_pgoff, length, vma->vm_page_prot);
-+	if (rc != 0) {
-+		pr_err("%s: remap_pfn_range failed (rc=%d)\n", __func__, rc);
-+	}
-+
-+	return rc;
-+}
-+
-+/****************************************************************************
-+*
-+*   File Operations for the driver.
-+*
-+***************************************************************************/
-+
-+static const struct file_operations vc_mem_fops = {
-+	.owner = THIS_MODULE,
-+	.open = vc_mem_open,
-+	.release = vc_mem_release,
-+	.unlocked_ioctl = vc_mem_ioctl,
-+	.mmap = vc_mem_mmap,
-+};
-+
-+#ifdef CONFIG_DEBUG_FS
-+static void vc_mem_debugfs_deinit(void)
-+{
-+	debugfs_remove_recursive(vc_mem_debugfs_entry);
-+	vc_mem_debugfs_entry = NULL;
-+}
-+
-+
-+static int vc_mem_debugfs_init(
-+	struct device *dev)
-+{
-+	vc_mem_debugfs_entry = debugfs_create_dir(DRIVER_NAME, NULL);
-+	if (!vc_mem_debugfs_entry) {
-+		dev_warn(dev, "could not create debugfs entry\n");
-+		return -EFAULT;
-+	}
-+
-+	if (!debugfs_create_x32("vc_mem_phys_addr",
-+				0444,
-+				vc_mem_debugfs_entry,
-+				(u32 *)&mm_vc_mem_phys_addr)) {
-+		dev_warn(dev, "%s:could not create vc_mem_phys entry\n",
-+			__func__);
-+		goto fail;
-+	}
-+
-+	if (!debugfs_create_x32("vc_mem_size",
-+				0444,
-+				vc_mem_debugfs_entry,
-+				(u32 *)&mm_vc_mem_size)) {
-+		dev_warn(dev, "%s:could not create vc_mem_size entry\n",
-+			__func__);
-+		goto fail;
-+	}
-+
-+	if (!debugfs_create_x32("vc_mem_base",
-+				0444,
-+				vc_mem_debugfs_entry,
-+				(u32 *)&mm_vc_mem_base)) {
-+		dev_warn(dev, "%s:could not create vc_mem_base entry\n",
-+			 __func__);
-+		goto fail;
-+	}
-+
-+	return 0;
-+
-+fail:
-+	vc_mem_debugfs_deinit();
-+	return -EFAULT;
-+}
-+
-+#endif /* CONFIG_DEBUG_FS */
-+
-+
-+/****************************************************************************
-+*
-+*   vc_mem_init
-+*
-+***************************************************************************/
-+
-+static int __init
-+vc_mem_init(void)
-+{
-+	int rc = -EFAULT;
-+	struct device *dev;
-+
-+	pr_debug("%s: called\n", __func__);
-+
-+	mm_vc_mem_phys_addr = phys_addr;
-+	mm_vc_mem_size = mem_size;
-+	mm_vc_mem_base = mem_base;
-+
-+	vc_mem_get_size();
-+
-+	pr_info("vc-mem: phys_addr:0x%08lx mem_base=0x%08x mem_size:0x%08x(%u MiB)\n",
-+		mm_vc_mem_phys_addr, mm_vc_mem_base, mm_vc_mem_size, mm_vc_mem_size / (1024 * 1024));
-+
-+	if ((rc = alloc_chrdev_region(&vc_mem_devnum, 0, 1, DRIVER_NAME)) < 0) {
-+		pr_err("%s: alloc_chrdev_region failed (rc=%d)\n",
-+		       __func__, rc);
-+		goto out_err;
-+	}
-+
-+	cdev_init(&vc_mem_cdev, &vc_mem_fops);
-+	if ((rc = cdev_add(&vc_mem_cdev, vc_mem_devnum, 1)) != 0) {
-+		pr_err("%s: cdev_add failed (rc=%d)\n", __func__, rc);
-+		goto out_unregister;
-+	}
-+
-+	vc_mem_class = class_create(THIS_MODULE, DRIVER_NAME);
-+	if (IS_ERR(vc_mem_class)) {
-+		rc = PTR_ERR(vc_mem_class);
-+		pr_err("%s: class_create failed (rc=%d)\n", __func__, rc);
-+		goto out_cdev_del;
-+	}
-+
-+	dev = device_create(vc_mem_class, NULL, vc_mem_devnum, NULL,
-+			    DRIVER_NAME);
-+	if (IS_ERR(dev)) {
-+		rc = PTR_ERR(dev);
-+		pr_err("%s: device_create failed (rc=%d)\n", __func__, rc);
-+		goto out_class_destroy;
-+	}
-+
-+#ifdef CONFIG_DEBUG_FS
-+	/* don't fail if the debug entries cannot be created */
-+	vc_mem_debugfs_init(dev);
-+#endif
-+
-+	vc_mem_inited = 1;
-+	return 0;
-+
-+	device_destroy(vc_mem_class, vc_mem_devnum);
-+
-+      out_class_destroy:
-+	class_destroy(vc_mem_class);
-+	vc_mem_class = NULL;
-+
-+      out_cdev_del:
-+	cdev_del(&vc_mem_cdev);
-+
-+      out_unregister:
-+	unregister_chrdev_region(vc_mem_devnum, 1);
-+
-+      out_err:
-+	return -1;
-+}
-+
-+/****************************************************************************
-+*
-+*   vc_mem_exit
-+*
-+***************************************************************************/
-+
-+static void __exit
-+vc_mem_exit(void)
-+{
-+	pr_debug("%s: called\n", __func__);
-+
-+	if (vc_mem_inited) {
-+#if CONFIG_DEBUG_FS
-+		vc_mem_debugfs_deinit();
-+#endif
-+		device_destroy(vc_mem_class, vc_mem_devnum);
-+		class_destroy(vc_mem_class);
-+		cdev_del(&vc_mem_cdev);
-+		unregister_chrdev_region(vc_mem_devnum, 1);
-+	}
-+}
-+
-+module_init(vc_mem_init);
-+module_exit(vc_mem_exit);
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Broadcom Corporation");
-+
-+module_param(phys_addr, uint, 0644);
-+module_param(mem_size, uint, 0644);
-+module_param(mem_base, uint, 0644);
---- /dev/null
-+++ b/include/linux/broadcom/vc_mem.h
-@@ -0,0 +1,35 @@
-+/*****************************************************************************
-+* Copyright 2010 - 2011 Broadcom Corporation.  All rights reserved.
-+*
-+* Unless you and Broadcom execute a separate written software license
-+* agreement governing use of this software, this software is licensed to you
-+* under the terms of the GNU General Public License version 2, available at
-+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-+*
-+* Notwithstanding the above, under no circumstances may you combine this
-+* software in any way with any other Broadcom software provided under a
-+* license other than the GPL, without Broadcom's express prior written
-+* consent.
-+*****************************************************************************/
-+
-+#ifndef _VC_MEM_H
-+#define _VC_MEM_H
-+
-+#include <linux/ioctl.h>
-+
-+#define VC_MEM_IOC_MAGIC  'v'
-+
-+#define VC_MEM_IOC_MEM_PHYS_ADDR    _IOR( VC_MEM_IOC_MAGIC, 0, unsigned long )
-+#define VC_MEM_IOC_MEM_SIZE         _IOR( VC_MEM_IOC_MAGIC, 1, unsigned int )
-+#define VC_MEM_IOC_MEM_BASE         _IOR( VC_MEM_IOC_MAGIC, 2, unsigned int )
-+#define VC_MEM_IOC_MEM_LOAD         _IOR( VC_MEM_IOC_MAGIC, 3, unsigned int )
-+
-+#if defined( __KERNEL__ )
-+#define VC_MEM_TO_ARM_ADDR_MASK 0x3FFFFFFF
-+
-+extern unsigned long mm_vc_mem_phys_addr;
-+extern unsigned int  mm_vc_mem_size;
-+extern int vc_mem_get_current_size( void );
-+#endif
-+
-+#endif  /* _VC_MEM_H */

target/linux/bcm27xx/patches-4.19/950-0047-Add-dev-gpiomem-device-for-rootless-user-GPIO-access.patch

@@ -1,303 +0,0 @@
-From cff179ff275e8f7849384ad2876c9a3237eeac79 Mon Sep 17 00:00:00 2001
-From: Luke Wren <luke@raspberrypi.org>
-Date: Fri, 21 Aug 2015 23:14:48 +0100
-Subject: [PATCH] Add /dev/gpiomem device for rootless user GPIO access
-
-Signed-off-by: Luke Wren <luke@raspberrypi.org>
-
-bcm2835-gpiomem: Fix for ARCH_BCM2835 builds
-
-Build on ARCH_BCM2835, and fail to probe if no IO resource.
-
-See: https://github.com/raspberrypi/linux/issues/1154
----
- drivers/char/broadcom/Kconfig           |   9 +
- drivers/char/broadcom/Makefile          |   3 +
- drivers/char/broadcom/bcm2835-gpiomem.c | 258 ++++++++++++++++++++++++
- 3 files changed, 270 insertions(+)
- create mode 100644 drivers/char/broadcom/bcm2835-gpiomem.c
-
---- a/drivers/char/broadcom/Kconfig
-+++ b/drivers/char/broadcom/Kconfig
-@@ -26,3 +26,12 @@ config BCM_VC_SM
- 	help
- 	Support for the VC shared memory on the Broadcom reference
- 	design. Uses the VCHIQ stack.
-+
-+config BCM2835_DEVGPIOMEM
-+	tristate "/dev/gpiomem rootless GPIO access via mmap() on the BCM2835"
-+	default m
-+	help
-+		Provides users with root-free access to the GPIO registers
-+		on the 2835. Calling mmap(/dev/gpiomem) will map the GPIO
-+		register page to the user's pointer.
-+
---- a/drivers/char/broadcom/Makefile
-+++ b/drivers/char/broadcom/Makefile
-@@ -1,2 +1,5 @@
- obj-$(CONFIG_BCM2708_VCMEM)	+= vc_mem.o
- obj-$(CONFIG_BCM_VC_SM)         += vc_sm/
-+
-+obj-$(CONFIG_BCM2835_DEVGPIOMEM)+= bcm2835-gpiomem.o
-+
---- /dev/null
-+++ b/drivers/char/broadcom/bcm2835-gpiomem.c
-@@ -0,0 +1,258 @@
-+/**
-+ * GPIO memory device driver
-+ *
-+ * Creates a chardev /dev/gpiomem which will provide user access to
-+ * the BCM2835's GPIO registers when it is mmap()'d.
-+ * No longer need root for user GPIO access, but without relaxing permissions
-+ * on /dev/mem.
-+ *
-+ * Written by Luke Wren <luke@raspberrypi.org>
-+ * Copyright (c) 2015, Raspberry Pi (Trading) Ltd.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ * 1. Redistributions of source code must retain the above copyright
-+ *    notice, this list of conditions, and the following disclaimer,
-+ *    without modification.
-+ * 2. Redistributions in binary form must reproduce the above copyright
-+ *    notice, this list of conditions and the following disclaimer in the
-+ *    documentation and/or other materials provided with the distribution.
-+ * 3. The names of the above-listed copyright holders may not be used
-+ *    to endorse or promote products derived from this software without
-+ *    specific prior written permission.
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") version 2, as published by the Free
-+ * Software Foundation.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
-+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/mm.h>
-+#include <linux/slab.h>
-+#include <linux/cdev.h>
-+#include <linux/pagemap.h>
-+#include <linux/io.h>
-+
-+#define DEVICE_NAME "bcm2835-gpiomem"
-+#define DRIVER_NAME "gpiomem-bcm2835"
-+#define DEVICE_MINOR 0
-+
-+struct bcm2835_gpiomem_instance {
-+	unsigned long gpio_regs_phys;
-+	struct device *dev;
-+};
-+
-+static struct cdev bcm2835_gpiomem_cdev;
-+static dev_t bcm2835_gpiomem_devid;
-+static struct class *bcm2835_gpiomem_class;
-+static struct device *bcm2835_gpiomem_dev;
-+static struct bcm2835_gpiomem_instance *inst;
-+
-+
-+/****************************************************************************
-+*
-+*   GPIO mem chardev file ops
-+*
-+***************************************************************************/
-+
-+static int bcm2835_gpiomem_open(struct inode *inode, struct file *file)
-+{
-+	int dev = iminor(inode);
-+	int ret = 0;
-+
-+	if (dev != DEVICE_MINOR) {
-+		dev_err(inst->dev, "Unknown minor device: %d", dev);
-+		ret = -ENXIO;
-+	}
-+	return ret;
-+}
-+
-+static int bcm2835_gpiomem_release(struct inode *inode, struct file *file)
-+{
-+	int dev = iminor(inode);
-+	int ret = 0;
-+
-+	if (dev != DEVICE_MINOR) {
-+		dev_err(inst->dev, "Unknown minor device %d", dev);
-+		ret = -ENXIO;
-+	}
-+	return ret;
-+}
-+
-+static const struct vm_operations_struct bcm2835_gpiomem_vm_ops = {
-+#ifdef CONFIG_HAVE_IOREMAP_PROT
-+	.access = generic_access_phys
-+#endif
-+};
-+
-+static int bcm2835_gpiomem_mmap(struct file *file, struct vm_area_struct *vma)
-+{
-+	/* Ignore what the user says - they're getting the GPIO regs
-+	   whether they like it or not! */
-+	unsigned long gpio_page = inst->gpio_regs_phys >> PAGE_SHIFT;
-+
-+	vma->vm_page_prot = phys_mem_access_prot(file, gpio_page,
-+						 PAGE_SIZE,
-+						 vma->vm_page_prot);
-+	vma->vm_ops = &bcm2835_gpiomem_vm_ops;
-+	if (remap_pfn_range(vma, vma->vm_start,
-+			gpio_page,
-+			PAGE_SIZE,
-+			vma->vm_page_prot)) {
-+		return -EAGAIN;
-+	}
-+	return 0;
-+}
-+
-+static const struct file_operations
-+bcm2835_gpiomem_fops = {
-+	.owner = THIS_MODULE,
-+	.open = bcm2835_gpiomem_open,
-+	.release = bcm2835_gpiomem_release,
-+	.mmap = bcm2835_gpiomem_mmap,
-+};
-+
-+
-+ /****************************************************************************
-+*
-+*   Probe and remove functions
-+*
-+***************************************************************************/
-+
-+
-+static int bcm2835_gpiomem_probe(struct platform_device *pdev)
-+{
-+	int err;
-+	void *ptr_err;
-+	struct device *dev = &pdev->dev;
-+	struct resource *ioresource;
-+
-+	/* Allocate buffers and instance data */
-+
-+	inst = kzalloc(sizeof(struct bcm2835_gpiomem_instance), GFP_KERNEL);
-+
-+	if (!inst) {
-+		err = -ENOMEM;
-+		goto failed_inst_alloc;
-+	}
-+
-+	inst->dev = dev;
-+
-+	ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (ioresource) {
-+		inst->gpio_regs_phys = ioresource->start;
-+	} else {
-+		dev_err(inst->dev, "failed to get IO resource");
-+		err = -ENOENT;
-+		goto failed_get_resource;
-+	}
-+
-+	/* Create character device entries */
-+
-+	err = alloc_chrdev_region(&bcm2835_gpiomem_devid,
-+				  DEVICE_MINOR, 1, DEVICE_NAME);
-+	if (err != 0) {
-+		dev_err(inst->dev, "unable to allocate device number");
-+		goto failed_alloc_chrdev;
-+	}
-+	cdev_init(&bcm2835_gpiomem_cdev, &bcm2835_gpiomem_fops);
-+	bcm2835_gpiomem_cdev.owner = THIS_MODULE;
-+	err = cdev_add(&bcm2835_gpiomem_cdev, bcm2835_gpiomem_devid, 1);
-+	if (err != 0) {
-+		dev_err(inst->dev, "unable to register device");
-+		goto failed_cdev_add;
-+	}
-+
-+	/* Create sysfs entries */
-+
-+	bcm2835_gpiomem_class = class_create(THIS_MODULE, DEVICE_NAME);
-+	ptr_err = bcm2835_gpiomem_class;
-+	if (IS_ERR(ptr_err))
-+		goto failed_class_create;
-+
-+	bcm2835_gpiomem_dev = device_create(bcm2835_gpiomem_class, NULL,
-+					bcm2835_gpiomem_devid, NULL,
-+					"gpiomem");
-+	ptr_err = bcm2835_gpiomem_dev;
-+	if (IS_ERR(ptr_err))
-+		goto failed_device_create;
-+
-+	dev_info(inst->dev, "Initialised: Registers at 0x%08lx",
-+		inst->gpio_regs_phys);
-+
-+	return 0;
-+
-+failed_device_create:
-+	class_destroy(bcm2835_gpiomem_class);
-+failed_class_create:
-+	cdev_del(&bcm2835_gpiomem_cdev);
-+	err = PTR_ERR(ptr_err);
-+failed_cdev_add:
-+	unregister_chrdev_region(bcm2835_gpiomem_devid, 1);
-+failed_alloc_chrdev:
-+failed_get_resource:
-+	kfree(inst);
-+failed_inst_alloc:
-+	dev_err(inst->dev, "could not load bcm2835_gpiomem");
-+	return err;
-+}
-+
-+static int bcm2835_gpiomem_remove(struct platform_device *pdev)
-+{
-+	struct device *dev = inst->dev;
-+
-+	kfree(inst);
-+	device_destroy(bcm2835_gpiomem_class, bcm2835_gpiomem_devid);
-+	class_destroy(bcm2835_gpiomem_class);
-+	cdev_del(&bcm2835_gpiomem_cdev);
-+	unregister_chrdev_region(bcm2835_gpiomem_devid, 1);
-+
-+	dev_info(dev, "GPIO mem driver removed - OK");
-+	return 0;
-+}
-+
-+ /****************************************************************************
-+*
-+*   Register the driver with device tree
-+*
-+***************************************************************************/
-+
-+static const struct of_device_id bcm2835_gpiomem_of_match[] = {
-+	{.compatible = "brcm,bcm2835-gpiomem",},
-+	{ /* sentinel */ },
-+};
-+
-+MODULE_DEVICE_TABLE(of, bcm2835_gpiomem_of_match);
-+
-+static struct platform_driver bcm2835_gpiomem_driver = {
-+	.probe = bcm2835_gpiomem_probe,
-+	.remove = bcm2835_gpiomem_remove,
-+	.driver = {
-+		   .name = DRIVER_NAME,
-+		   .owner = THIS_MODULE,
-+		   .of_match_table = bcm2835_gpiomem_of_match,
-+		   },
-+};
-+
-+module_platform_driver(bcm2835_gpiomem_driver);
-+
-+MODULE_ALIAS("platform:gpiomem-bcm2835");
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("gpiomem driver for accessing GPIO from userspace");
-+MODULE_AUTHOR("Luke Wren <luke@raspberrypi.org>");

target/linux/bcm27xx/patches-4.19/950-0049-MISC-bcm2835-smi-use-clock-manager-and-fix-reload-is.patch

@@ -1,170 +0,0 @@
-From f7cccb2e66f0187f69a432536f227b32a458f94b Mon Sep 17 00:00:00 2001
-From: Martin Sperl <kernel@martin.sperl.org>
-Date: Tue, 26 Apr 2016 14:59:21 +0000
-Subject: [PATCH] MISC: bcm2835: smi: use clock manager and fix reload
- issues
-
-Use clock manager instead of self-made clockmanager.
-
-Also fix some error paths that showd up during development
-(especially missing release of dma resources on rmmod)
-
-Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
----
- drivers/misc/bcm2835_smi.c | 86 +++++++++++++-------------------------
- 1 file changed, 28 insertions(+), 58 deletions(-)
-
---- a/drivers/misc/bcm2835_smi.c
-+++ b/drivers/misc/bcm2835_smi.c
-@@ -34,6 +34,7 @@
-  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  */
- 
-+#include <linux/clk.h>
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/of.h>
-@@ -62,7 +63,7 @@
- struct bcm2835_smi_instance {
- 	struct device *dev;
- 	struct smi_settings settings;
--	__iomem void *smi_regs_ptr, *cm_smi_regs_ptr;
-+	__iomem void *smi_regs_ptr;
- 	dma_addr_t smi_regs_busaddr;
- 
- 	struct dma_chan *dma_chan;
-@@ -72,8 +73,7 @@ struct bcm2835_smi_instance {
- 
- 	struct scatterlist buffer_sgl;
- 
--	int clock_source;
--	int clock_divisor;
-+	struct clk *clk;
- 
- 	/* Sometimes we are called into in an atomic context (e.g. by
- 	   JFFS2 + MTD) so we can't use a mutex */
-@@ -82,42 +82,6 @@ struct bcm2835_smi_instance {
- 
- /****************************************************************************
- *
--*   SMI clock manager setup
--*
--***************************************************************************/
--
--static inline void write_smi_cm_reg(struct bcm2835_smi_instance *inst,
--	u32 val, unsigned reg)
--{
--	writel(CM_PWD | val, inst->cm_smi_regs_ptr + reg);
--}
--
--static inline u32 read_smi_cm_reg(struct bcm2835_smi_instance *inst,
--	unsigned reg)
--{
--	return readl(inst->cm_smi_regs_ptr + reg);
--}
--
--static void smi_setup_clock(struct bcm2835_smi_instance *inst)
--{
--	dev_dbg(inst->dev, "Setting up clock...");
--	/* Disable SMI clock and wait for it to stop. */
--	write_smi_cm_reg(inst, 0, CM_SMI_CTL);
--	while (read_smi_cm_reg(inst, CM_SMI_CTL) & CM_SMI_CTL_BUSY)
--		;
--
--	write_smi_cm_reg(inst, (inst->clock_divisor << CM_SMI_DIV_DIVI_OFFS),
--	       CM_SMI_DIV);
--	write_smi_cm_reg(inst, (inst->clock_source << CM_SMI_CTL_SRC_OFFS),
--	       CM_SMI_CTL);
--
--	/* Enable the clock */
--	write_smi_cm_reg(inst, (inst->clock_source << CM_SMI_CTL_SRC_OFFS) |
--	       CM_SMI_CTL_ENAB, CM_SMI_CTL);
--}
--
--/****************************************************************************
--*
- *   SMI peripheral setup
- *
- ***************************************************************************/
-@@ -894,42 +858,40 @@ static int bcm2835_smi_probe(struct plat
- 	struct device_node *node = dev->of_node;
- 	struct resource *ioresource;
- 	struct bcm2835_smi_instance *inst;
-+	const __be32 *addr;
- 
-+	/* We require device tree support */
-+	if (!node)
-+		return -EINVAL;
- 	/* Allocate buffers and instance data */
--
- 	inst = devm_kzalloc(dev, sizeof(struct bcm2835_smi_instance),
- 		GFP_KERNEL);
--
- 	if (!inst)
- 		return -ENOMEM;
- 
- 	inst->dev = dev;
- 	spin_lock_init(&inst->transaction_lock);
- 
--	/* We require device tree support */
--	if (!node)
--		return -EINVAL;
--
- 	ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- 	inst->smi_regs_ptr = devm_ioremap_resource(dev, ioresource);
--	ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 1);
--	inst->cm_smi_regs_ptr = devm_ioremap_resource(dev, ioresource);
--	inst->smi_regs_busaddr = be32_to_cpu(
--		*of_get_address(node, 0, NULL, NULL));
--	of_property_read_u32(node,
--			     "brcm,smi-clock-source",
--			     &inst->clock_source);
--	of_property_read_u32(node,
--			     "brcm,smi-clock-divisor",
--			     &inst->clock_divisor);
-+	if (IS_ERR(inst->smi_regs_ptr)) {
-+		err = PTR_ERR(inst->smi_regs_ptr);
-+		goto err;
-+	}
-+	addr = of_get_address(node, 0, NULL, NULL);
-+	inst->smi_regs_busaddr = be32_to_cpu(addr);
- 
- 	err = bcm2835_smi_dma_setup(inst);
- 	if (err)
--		return err;
-+		goto err;
- 
--	/* Finally, do peripheral setup */
-+	/* request clock */
-+	inst->clk = devm_clk_get(dev, NULL);
-+	if (!inst->clk)
-+		goto err;
-+	clk_prepare_enable(inst->clk);
- 
--	smi_setup_clock(inst);
-+	/* Finally, do peripheral setup */
- 	smi_setup_regs(inst);
- 
- 	platform_set_drvdata(pdev, inst);
-@@ -937,6 +899,9 @@ static int bcm2835_smi_probe(struct plat
- 	dev_info(inst->dev, "initialised");
- 
- 	return 0;
-+err:
-+	kfree(inst);
-+	return err;
- }
- 
- /****************************************************************************
-@@ -950,6 +915,11 @@ static int bcm2835_smi_remove(struct pla
- 	struct bcm2835_smi_instance *inst = platform_get_drvdata(pdev);
- 	struct device *dev = inst->dev;
- 
-+	dmaengine_terminate_all(inst->dma_chan);
-+	dma_release_channel(inst->dma_chan);
-+
-+	clk_disable_unprepare(inst->clk);
-+
- 	dev_info(dev, "SMI device removed - OK");
- 	return 0;
- }

target/linux/bcm27xx/patches-4.19/950-0050-Add-SMI-NAND-driver.patch

@@ -1,348 +0,0 @@
-From 06d1fce502f478f7e554c591a68cd42cc861e976 Mon Sep 17 00:00:00 2001
-From: Luke Wren <wren6991@gmail.com>
-Date: Sat, 5 Sep 2015 01:16:10 +0100
-Subject: [PATCH] Add SMI NAND driver
-
-Signed-off-by: Luke Wren <wren6991@gmail.com>
----
- .../bindings/mtd/brcm,bcm2835-smi-nand.txt    |  42 +++
- drivers/mtd/nand/raw/Kconfig                  |   7 +
- drivers/mtd/nand/raw/Makefile                 |   1 +
- drivers/mtd/nand/raw/bcm2835_smi_nand.c       | 258 ++++++++++++++++++
- 4 files changed, 308 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/mtd/brcm,bcm2835-smi-nand.txt
- create mode 100644 drivers/mtd/nand/raw/bcm2835_smi_nand.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mtd/brcm,bcm2835-smi-nand.txt
-@@ -0,0 +1,42 @@
-+* BCM2835 SMI NAND flash
-+
-+This driver is a shim between the BCM2835 SMI driver (SMI is a peripheral for
-+talking to parallel register interfaces) and Linux's MTD layer.
-+
-+Required properties:
-+- compatible: "brcm,bcm2835-smi-nand"
-+- status: "okay"
-+
-+Optional properties:
-+- partition@n, where n is an integer from a consecutive sequence starting at 0
-+	- Difficult to store partition table on NAND device - normally put it
-+	in the source code, kernel bootparams, or device tree (the best way!)
-+	- Sub-properties:
-+		- label: the partition name, as shown by mtdinfo /dev/mtd*
-+		- reg: the size and offset of this partition.
-+		- (optional) read-only: an empty property flagging as read only
-+
-+Example:
-+
-+nand: flash@0 {
-+	compatible = "brcm,bcm2835-smi-nand";
-+	status = "okay";
-+
-+	partition@0 {
-+		label = "stage2";
-+		// 128k
-+		reg = <0 0x20000>;
-+		read-only;
-+	};
-+	partition@1 {
-+		label = "firmware";
-+		// 16M
-+		reg = <0x20000 0x1000000>;
-+		read-only;
-+	};
-+	partition@2 {
-+		label = "root";
-+		// 2G
-+		reg = <0x1020000 0x80000000>;
-+	};
-+};
-\ No newline at end of file
---- a/drivers/mtd/nand/raw/Kconfig
-+++ b/drivers/mtd/nand/raw/Kconfig
-@@ -40,6 +40,13 @@ config MTD_SM_COMMON
- 	tristate
- 	default n
- 
-+config MTD_NAND_BCM2835_SMI
-+        tristate "Use Broadcom's Secondary Memory Interface as a NAND controller (BCM283x)"
-+        depends on BCM2835_SMI
-+        default m
-+        help
-+	  Uses the BCM2835's SMI peripheral as a NAND controller.
-+
- config MTD_NAND_DENALI
- 	tristate
- 
---- a/drivers/mtd/nand/raw/Makefile
-+++ b/drivers/mtd/nand/raw/Makefile
-@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_NAND_DENALI)		+= denali
- obj-$(CONFIG_MTD_NAND_DENALI_PCI)	+= denali_pci.o
- obj-$(CONFIG_MTD_NAND_DENALI_DT)	+= denali_dt.o
- obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o
-+obj-$(CONFIG_MTD_NAND_BCM2835_SMI)	+= bcm2835_smi_nand.o
- obj-$(CONFIG_MTD_NAND_S3C2410)		+= s3c2410.o
- obj-$(CONFIG_MTD_NAND_TANGO)		+= tango_nand.o
- obj-$(CONFIG_MTD_NAND_DAVINCI)		+= davinci_nand.o
---- /dev/null
-+++ b/drivers/mtd/nand/raw/bcm2835_smi_nand.c
-@@ -0,0 +1,258 @@
-+/**
-+ * NAND flash driver for Broadcom Secondary Memory Interface
-+ *
-+ * Written by Luke Wren <luke@raspberrypi.org>
-+ * Copyright (c) 2015, Raspberry Pi (Trading) Ltd.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ * 1. Redistributions of source code must retain the above copyright
-+ *    notice, this list of conditions, and the following disclaimer,
-+ *    without modification.
-+ * 2. Redistributions in binary form must reproduce the above copyright
-+ *    notice, this list of conditions and the following disclaimer in the
-+ *    documentation and/or other materials provided with the distribution.
-+ * 3. The names of the above-listed copyright holders may not be used
-+ *    to endorse or promote products derived from this software without
-+ *    specific prior written permission.
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") version 2, as published by the Free
-+ * Software Foundation.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
-+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/mtd/rawnand.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include <linux/broadcom/bcm2835_smi.h>
-+
-+#define DEVICE_NAME "bcm2835-smi-nand"
-+#define DRIVER_NAME "smi-nand-bcm2835"
-+
-+struct bcm2835_smi_nand_host {
-+	struct bcm2835_smi_instance *smi_inst;
-+	struct nand_chip nand_chip;
-+	struct mtd_info mtd;
-+	struct device *dev;
-+};
-+
-+/****************************************************************************
-+*
-+*   NAND functionality implementation
-+*
-+****************************************************************************/
-+
-+#define SMI_NAND_CLE_PIN 0x01
-+#define SMI_NAND_ALE_PIN 0x02
-+
-+static inline void bcm2835_smi_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
-+					     unsigned int ctrl)
-+{
-+	uint32_t cmd32 = cmd;
-+	uint32_t addr = ~(SMI_NAND_CLE_PIN | SMI_NAND_ALE_PIN);
-+	struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent);
-+	struct bcm2835_smi_instance *inst = host->smi_inst;
-+
-+	if (ctrl & NAND_CLE)
-+		addr |= SMI_NAND_CLE_PIN;
-+	if (ctrl & NAND_ALE)
-+		addr |= SMI_NAND_ALE_PIN;
-+	/* Lower ALL the CS pins! */
-+	if (ctrl & NAND_NCE)
-+		addr &= (SMI_NAND_CLE_PIN | SMI_NAND_ALE_PIN);
-+
-+	bcm2835_smi_set_address(inst, addr);
-+
-+	if (cmd != NAND_CMD_NONE)
-+		bcm2835_smi_write_buf(inst, &cmd32, 1);
-+}
-+
-+static inline uint8_t bcm2835_smi_nand_read_byte(struct mtd_info *mtd)
-+{
-+	uint8_t byte;
-+	struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent);
-+	struct bcm2835_smi_instance *inst = host->smi_inst;
-+
-+	bcm2835_smi_read_buf(inst, &byte, 1);
-+	return byte;
-+}
-+
-+static inline void bcm2835_smi_nand_write_byte(struct mtd_info *mtd,
-+					       uint8_t byte)
-+{
-+	struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent);
-+	struct bcm2835_smi_instance *inst = host->smi_inst;
-+
-+	bcm2835_smi_write_buf(inst, &byte, 1);
-+}
-+
-+static inline void bcm2835_smi_nand_write_buf(struct mtd_info *mtd,
-+					      const uint8_t *buf, int len)
-+{
-+	struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent);
-+	struct bcm2835_smi_instance *inst = host->smi_inst;
-+
-+	bcm2835_smi_write_buf(inst, buf, len);
-+}
-+
-+static inline void bcm2835_smi_nand_read_buf(struct mtd_info *mtd,
-+					     uint8_t *buf, int len)
-+{
-+	struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent);
-+	struct bcm2835_smi_instance *inst = host->smi_inst;
-+
-+	bcm2835_smi_read_buf(inst, buf, len);
-+}
-+
-+/****************************************************************************
-+*
-+*   Probe and remove functions
-+*
-+***************************************************************************/
-+
-+static int bcm2835_smi_nand_probe(struct platform_device *pdev)
-+{
-+	struct bcm2835_smi_nand_host *host;
-+	struct nand_chip *this;
-+	struct mtd_info *mtd;
-+	struct device *dev = &pdev->dev;
-+	struct device_node *node = dev->of_node, *smi_node;
-+	struct mtd_part_parser_data ppdata;
-+	struct smi_settings *smi_settings;
-+	struct bcm2835_smi_instance *smi_inst;
-+	int ret = -ENXIO;
-+
-+	if (!node) {
-+		dev_err(dev, "No device tree node supplied!");
-+		return -EINVAL;
-+	}
-+
-+	smi_node = of_parse_phandle(node, "smi_handle", 0);
-+
-+	/* Request use of SMI peripheral: */
-+	smi_inst = bcm2835_smi_get(smi_node);
-+
-+	if (!smi_inst) {
-+		dev_err(dev, "Could not register with SMI.");
-+		return -EPROBE_DEFER;
-+	}
-+
-+	/* Set SMI timing and bus width */
-+
-+	smi_settings = bcm2835_smi_get_settings_from_regs(smi_inst);
-+
-+	smi_settings->data_width = SMI_WIDTH_8BIT;
-+	smi_settings->read_setup_time = 2;
-+	smi_settings->read_hold_time = 1;
-+	smi_settings->read_pace_time = 1;
-+	smi_settings->read_strobe_time = 3;
-+
-+	smi_settings->write_setup_time = 2;
-+	smi_settings->write_hold_time = 1;
-+	smi_settings->write_pace_time = 1;
-+	smi_settings->write_strobe_time = 3;
-+
-+	bcm2835_smi_set_regs_from_settings(smi_inst);
-+
-+	host = devm_kzalloc(dev, sizeof(struct bcm2835_smi_nand_host),
-+		GFP_KERNEL);
-+	if (!host)
-+		return -ENOMEM;
-+
-+	host->dev = dev;
-+	host->smi_inst = smi_inst;
-+
-+	platform_set_drvdata(pdev, host);
-+
-+	/* Link the structures together */
-+
-+	this = &host->nand_chip;
-+	mtd = &host->mtd;
-+	mtd->priv = this;
-+	mtd->owner = THIS_MODULE;
-+	mtd->dev.parent = dev;
-+	mtd->name = DRIVER_NAME;
-+
-+	/* 20 us command delay time... */
-+	this->chip_delay = 20;
-+
-+	this->priv = host;
-+	this->cmd_ctrl = bcm2835_smi_nand_cmd_ctrl;
-+	this->read_byte = bcm2835_smi_nand_read_byte;
-+	this->write_byte = bcm2835_smi_nand_write_byte;
-+	this->write_buf = bcm2835_smi_nand_write_buf;
-+	this->read_buf = bcm2835_smi_nand_read_buf;
-+
-+	this->ecc.mode = NAND_ECC_SOFT;
-+
-+	/* Should never be accessed directly: */
-+
-+	this->IO_ADDR_R = (void *)0xdeadbeef;
-+	this->IO_ADDR_W = (void *)0xdeadbeef;
-+
-+	/* Scan to find the device and get the page size */
-+
-+	if (nand_scan(mtd, 1))
-+		return -ENXIO;
-+
-+	nand_release(mtd);
-+	return -EINVAL;
-+}
-+
-+static int bcm2835_smi_nand_remove(struct platform_device *pdev)
-+{
-+	struct bcm2835_smi_nand_host *host = platform_get_drvdata(pdev);
-+
-+	nand_release(&host->mtd);
-+
-+	return 0;
-+}
-+
-+/****************************************************************************
-+*
-+*   Register the driver with device tree
-+*
-+***************************************************************************/
-+
-+static const struct of_device_id bcm2835_smi_nand_of_match[] = {
-+	{.compatible = "brcm,bcm2835-smi-nand",},
-+	{ /* sentinel */ }
-+};
-+
-+MODULE_DEVICE_TABLE(of, bcm2835_smi_nand_of_match);
-+
-+static struct platform_driver bcm2835_smi_nand_driver = {
-+	.probe = bcm2835_smi_nand_probe,
-+	.remove = bcm2835_smi_nand_remove,
-+	.driver = {
-+		.name = DRIVER_NAME,
-+		.owner = THIS_MODULE,
-+		.of_match_table = bcm2835_smi_nand_of_match,
-+	},
-+};
-+
-+module_platform_driver(bcm2835_smi_nand_driver);
-+
-+MODULE_ALIAS("platform:smi-nand-bcm2835");
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION
-+	("Driver for NAND chips using Broadcom Secondary Memory Interface");
-+MODULE_AUTHOR("Luke Wren <luke@raspberrypi.org>");

target/linux/bcm27xx/patches-4.19/950-0051-Add-cpufreq-driver.patch

@@ -1,259 +0,0 @@
-From 0a248af6e18d7f1ad57fffa7f588bc8a5851832e Mon Sep 17 00:00:00 2001
-From: popcornmix <popcornmix@gmail.com>
-Date: Wed, 3 Jul 2013 00:49:20 +0100
-Subject: [PATCH] Add cpufreq driver
-
-Signed-off-by: popcornmix <popcornmix@gmail.com>
-
-bcm2835-cpufreq: Change licence to GPLv2
-
-Signed-off-by: Eben Upton <eben.upton@broadcom.com>
-Signed-off-by: Dom Cobley <dom@raspberrypi.com>
----
- drivers/cpufreq/Kconfig.arm       |   9 ++
- drivers/cpufreq/Makefile          |   1 +
- drivers/cpufreq/bcm2835-cpufreq.c | 210 ++++++++++++++++++++++++++++++
- 3 files changed, 220 insertions(+)
- create mode 100644 drivers/cpufreq/bcm2835-cpufreq.c
-
---- a/drivers/cpufreq/Kconfig.arm
-+++ b/drivers/cpufreq/Kconfig.arm
-@@ -260,6 +260,15 @@ config ARM_TANGO_CPUFREQ
- 	depends on CPUFREQ_DT && ARCH_TANGO
- 	default y
- 
-+config ARM_BCM2835_CPUFREQ
-+	depends on RASPBERRYPI_FIRMWARE
-+	bool "BCM2835 Driver"
-+	default y
-+	help
-+	  This adds the CPUFreq driver for BCM2835
-+
-+	  If in doubt, say N.
-+
- config ARM_TEGRA20_CPUFREQ
- 	tristate "Tegra20 CPUFreq support"
- 	depends on ARCH_TEGRA
---- a/drivers/cpufreq/Makefile
-+++ b/drivers/cpufreq/Makefile
-@@ -80,6 +80,7 @@ obj-$(CONFIG_ARM_SCPI_CPUFREQ)		+= scpi-
- obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
- obj-$(CONFIG_ARM_STI_CPUFREQ)		+= sti-cpufreq.o
- obj-$(CONFIG_ARM_TANGO_CPUFREQ)		+= tango-cpufreq.o
-+obj-$(CONFIG_ARM_BCM2835_CPUFREQ)	+= bcm2835-cpufreq.o
- obj-$(CONFIG_ARM_TEGRA20_CPUFREQ)	+= tegra20-cpufreq.o
- obj-$(CONFIG_ARM_TEGRA124_CPUFREQ)	+= tegra124-cpufreq.o
- obj-$(CONFIG_ARM_TEGRA186_CPUFREQ)	+= tegra186-cpufreq.o
---- /dev/null
-+++ b/drivers/cpufreq/bcm2835-cpufreq.c
-@@ -0,0 +1,210 @@
-+/*
-+ * Copyright 2011 Broadcom Corporation.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; version 2
-+ * of the License.
-+ *
-+ * This driver dynamically manages the CPU Frequency of the ARM
-+ * processor. Messages are sent to Videocore either setting or requesting the
-+ * frequency of the ARM in order to match an appropiate frequency to the current
-+ * usage of the processor. The policy which selects the frequency to use is
-+ * defined in the kernel .config file, but can be changed during runtime.
-+ */
-+
-+/* ---------- INCLUDES ---------- */
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/cpufreq.h>
-+#include <soc/bcm2835/raspberrypi-firmware.h>
-+
-+/* ---------- DEFINES ---------- */
-+/*#define CPUFREQ_DEBUG_ENABLE*/		/* enable debugging */
-+#define MODULE_NAME "bcm2835-cpufreq"
-+
-+#define VCMSG_ID_ARM_CLOCK 0x000000003		/* Clock/Voltage ID's */
-+
-+/* debug printk macros */
-+#ifdef CPUFREQ_DEBUG_ENABLE
-+#define print_debug(fmt,...) pr_debug("%s:%s:%d: "fmt, MODULE_NAME, __func__, __LINE__, ##__VA_ARGS__)
-+#else
-+#define print_debug(fmt,...)
-+#endif
-+#define print_err(fmt,...) pr_err("%s:%s:%d: "fmt, MODULE_NAME, __func__,__LINE__, ##__VA_ARGS__)
-+#define print_info(fmt,...) pr_info("%s: "fmt, MODULE_NAME, ##__VA_ARGS__)
-+
-+/* ---------- GLOBALS ---------- */
-+static struct cpufreq_driver bcm2835_cpufreq_driver;	/* the cpufreq driver global */
-+static unsigned int min_frequency, max_frequency;
-+static struct cpufreq_frequency_table bcm2835_freq_table[3];
-+
-+/*
-+ ===============================================
-+  clk_rate either gets or sets the clock rates.
-+ ===============================================
-+*/
-+
-+static int bcm2835_cpufreq_clock_property(u32 tag, u32 id, u32 *val)
-+{
-+	struct rpi_firmware *fw = rpi_firmware_get(NULL);
-+	struct {
-+		u32 id;
-+		u32 val;
-+	} packet;
-+	int ret;
-+
-+	packet.id = id;
-+	packet.val = *val;
-+	ret = rpi_firmware_property(fw, tag, &packet, sizeof(packet));
-+	if (ret)
-+		return ret;
-+
-+	*val = packet.val;
-+
-+	return 0;
-+}
-+
-+static uint32_t bcm2835_cpufreq_set_clock(int cur_rate, int arm_rate)
-+{
-+	u32 rate = arm_rate * 1000;
-+	int ret;
-+
-+	ret = bcm2835_cpufreq_clock_property(RPI_FIRMWARE_SET_CLOCK_RATE, VCMSG_ID_ARM_CLOCK, &rate);
-+	if (ret) {
-+		print_err("Failed to set clock: %d (%d)\n", arm_rate, ret);
-+		return 0;
-+	}
-+
-+	rate /= 1000;
-+	print_debug("Setting new frequency = %d -> %d (actual %d)\n", cur_rate, arm_rate, rate);
-+
-+	return rate;
-+}
-+
-+static uint32_t bcm2835_cpufreq_get_clock(int tag)
-+{
-+	u32 rate;
-+	int ret;
-+
-+	ret = bcm2835_cpufreq_clock_property(tag, VCMSG_ID_ARM_CLOCK, &rate);
-+	if (ret) {
-+		print_err("Failed to get clock (%d)\n", ret);
-+		return 0;
-+	}
-+
-+	rate /= 1000;
-+	print_debug("%s frequency = %u\n",
-+		tag == RPI_FIRMWARE_GET_CLOCK_RATE ? "Current":
-+		tag == RPI_FIRMWARE_GET_MIN_CLOCK_RATE ? "Min":
-+		tag == RPI_FIRMWARE_GET_MAX_CLOCK_RATE ? "Max":
-+		"Unexpected", rate);
-+
-+	return rate;
-+}
-+
-+/*
-+ ====================================================
-+  Module Initialisation registers the cpufreq driver
-+ ====================================================
-+*/
-+static int __init bcm2835_cpufreq_module_init(void)
-+{
-+	print_debug("IN\n");
-+	return cpufreq_register_driver(&bcm2835_cpufreq_driver);
-+}
-+
-+/*
-+ =============
-+  Module exit
-+ =============
-+*/
-+static void __exit bcm2835_cpufreq_module_exit(void)
-+{
-+	print_debug("IN\n");
-+	cpufreq_unregister_driver(&bcm2835_cpufreq_driver);
-+	return;
-+}
-+
-+/*
-+ ==============================================================
-+  Initialisation function sets up the CPU policy for first use
-+ ==============================================================
-+*/
-+static int bcm2835_cpufreq_driver_init(struct cpufreq_policy *policy)
-+{
-+	/* measured value of how long it takes to change frequency */
-+	const unsigned int transition_latency = 355000; /* ns */
-+
-+	if (!rpi_firmware_get(NULL)) {
-+		print_err("Firmware is not available\n");
-+		return -ENODEV;
-+	}
-+
-+	/* now find out what the maximum and minimum frequencies are */
-+	min_frequency = bcm2835_cpufreq_get_clock(RPI_FIRMWARE_GET_MIN_CLOCK_RATE);
-+	max_frequency = bcm2835_cpufreq_get_clock(RPI_FIRMWARE_GET_MAX_CLOCK_RATE);
-+
-+	if (min_frequency == max_frequency) {
-+		bcm2835_freq_table[0].frequency = min_frequency;
-+		bcm2835_freq_table[1].frequency = CPUFREQ_TABLE_END;
-+	} else {
-+		bcm2835_freq_table[0].frequency = min_frequency;
-+		bcm2835_freq_table[1].frequency = max_frequency;
-+		bcm2835_freq_table[2].frequency = CPUFREQ_TABLE_END;
-+	}
-+
-+	print_info("min=%d max=%d\n", min_frequency, max_frequency);
-+	return cpufreq_generic_init(policy, bcm2835_freq_table, transition_latency);
-+}
-+
-+/*
-+ =====================================================================
-+  Target index function chooses the requested frequency from the table
-+ =====================================================================
-+*/
-+
-+static int bcm2835_cpufreq_driver_target_index(struct cpufreq_policy *policy, unsigned int state)
-+{
-+	unsigned int target_freq = state == 0 ? min_frequency : max_frequency;
-+	unsigned int cur = bcm2835_cpufreq_set_clock(policy->cur, target_freq);
-+
-+	if (!cur)
-+	{
-+		print_err("Error occurred setting a new frequency (%d)\n", target_freq);
-+		return -EINVAL;
-+	}
-+	print_debug("%s: %i: freq %d->%d\n", policy->governor->name, state, policy->cur, cur);
-+	return 0;
-+}
-+
-+/*
-+ ======================================================
-+  Get function returns the current frequency from table
-+ ======================================================
-+*/
-+
-+static unsigned int bcm2835_cpufreq_driver_get(unsigned int cpu)
-+{
-+	unsigned int actual_rate = bcm2835_cpufreq_get_clock(RPI_FIRMWARE_GET_CLOCK_RATE);
-+	print_debug("cpu%d: freq=%d\n", cpu, actual_rate);
-+	return actual_rate <= min_frequency ? min_frequency : max_frequency;
-+}
-+
-+/* the CPUFreq driver */
-+static struct cpufreq_driver bcm2835_cpufreq_driver = {
-+	.name         = "BCM2835 CPUFreq",
-+	.init         = bcm2835_cpufreq_driver_init,
-+	.verify       = cpufreq_generic_frequency_table_verify,
-+	.target_index = bcm2835_cpufreq_driver_target_index,
-+	.get          = bcm2835_cpufreq_driver_get,
-+	.attr         = cpufreq_generic_attr,
-+};
-+
-+MODULE_AUTHOR("Dorian Peake and Dom Cobley");
-+MODULE_DESCRIPTION("CPU frequency driver for BCM2835 chip");
-+MODULE_LICENSE("GPL");
-+
-+module_init(bcm2835_cpufreq_module_init);
-+module_exit(bcm2835_cpufreq_module_exit);

target/linux/bcm27xx/patches-4.19/950-0052-Add-Chris-Boot-s-i2c-driver.patch

@@ -1,660 +0,0 @@
-From 1f72dfe2738305c57605a8192176117e1641779c Mon Sep 17 00:00:00 2001
-From: popcornmix <popcornmix@gmail.com>
-Date: Wed, 17 Jun 2015 15:44:08 +0100
-Subject: [PATCH] Add Chris Boot's i2c driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-i2c-bcm2708: fixed baudrate
-
-Fixed issue where the wrong CDIV value was set for baudrates below 3815 Hz (for 250MHz bus clock).
-In that case the computed CDIV value was more than 0xffff. However the CDIV register width is only 16 bits.
-This resulted in incorrect setting of CDIV and higher baudrate than intended.
-Example: 3500Hz -> CDIV=0x11704 -> CDIV(16bit)=0x1704 -> 42430Hz
-After correction: 3500Hz -> CDIV=0x11704 -> CDIV(16bit)=0xffff -> 3815Hz
-The correct baudrate is shown in the log after the cdiv > 0xffff correction.
-
-Perform I2C combined transactions when possible
-
-Perform I2C combined transactions whenever possible, within the
-restrictions of the Broadcomm Serial Controller.
-
-Disable DONE interrupt during TA poll
-
-Prevent interrupt from being triggered if poll is missed and transfer
-starts and finishes.
-
-i2c: Make combined transactions optional and disabled by default
-
-i2c: bcm2708: add device tree support
-
-Add DT support to driver and add to .dtsi file.
-Setup pins in .dts file.
-i2c is disabled by default.
-
-Signed-off-by: Noralf Tronnes <notro@tronnes.org>
-
-bcm2708: don't register i2c controllers when using DT
-
-The devices for the i2c controllers are in the Device Tree.
-Only register devices when not using DT.
-
-Signed-off-by: Noralf Tronnes <notro@tronnes.org>
-
-I2C: Only register the I2C device for the current board revision
-
-i2c_bcm2708: Fix clock reference counting
-
-Fix grabbing lock from atomic context in i2c driver
-
-2 main changes:
-- check for timeouts in the bcm2708_bsc_setup function as indicated by this comment:
-      /* poll for transfer start bit (should only take 1-20 polls) */
-  This implies that the setup function can now fail so account for this everywhere it's called
-- Removed the clk_get_rate call from inside the setup function as it locks a mutex and that's not ok since we call it from under a spin lock.
-
-i2c-bcm2708: When using DT, leave the GPIO setup to pinctrl
-
-i2c-bcm2708: Increase timeouts to allow larger transfers
-
-Use the timeout value provided by the I2C_TIMEOUT ioctl when waiting
-for completion. The default timeout is 1 second.
-
-See: https://github.com/raspberrypi/linux/issues/260
-
-i2c-bcm2708/BCM270X_DT: Add support for I2C2
-
-The third I2C bus (I2C2) is normally reserved for HDMI use. Careless
-use of this bus can break an attached display - use with caution.
-
-It is recommended to disable accesses by VideoCore by setting
-hdmi_ignore_edid=1 or hdmi_edid_file=1 in config.txt.
-
-The interface is disabled by default - enable using the
-i2c2_iknowwhatimdoing DT parameter.
-
-bcm2708-spi: Don't use static pin configuration with DT
-
-Also remove superfluous error checking - the SPI framework ensures the
-validity of the chip_select value.
-
-i2c-bcm2708: Remove non-DT support
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
-
-Set the BSC_CLKT clock streching timeout to 35ms as per SMBus specs.
-
-Fixes i2c_bcm2708: Write to FIFO correctly - v2 (#1574)
-
-* i2c: fix i2c_bcm2708: Clear FIFO before sending data
-
-Make sure FIFO gets cleared before trying to send
-data in case of a repeated start (COMBINED=Y).
-
-* i2c: fix i2c_bcm2708: Only write to FIFO when not full
-
-Check if FIFO can accept data before writing.
-To avoid a peripheral read on the last iteration of a loop,
-both bcm2708_bsc_fifo_fill and ~drain are changed as well.
----
- drivers/i2c/busses/Kconfig       |  19 ++
- drivers/i2c/busses/Makefile      |   2 +
- drivers/i2c/busses/i2c-bcm2708.c | 512 +++++++++++++++++++++++++++++++
- 3 files changed, 533 insertions(+)
- create mode 100644 drivers/i2c/busses/i2c-bcm2708.c
-
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -8,6 +8,25 @@ menu "I2C Hardware Bus support"
- comment "PC SMBus host controller drivers"
- 	depends on PCI
- 
-+config I2C_BCM2708
-+	tristate "BCM2708 BSC"
-+	depends on ARCH_BCM2835
-+	help
-+	  Enabling this option will add BSC (Broadcom Serial Controller)
-+	  support for the BCM2708. BSC is a Broadcom proprietary bus compatible
-+	  with I2C/TWI/SMBus.
-+
-+config I2C_BCM2708_BAUDRATE
-+	prompt "BCM2708 I2C baudrate"
-+	depends on I2C_BCM2708
-+	int
-+	default 100000
-+	help
-+	  Set the I2C baudrate. This will alter the default value. A
-+	  different baudrate can be set by using a module parameter as well. If
-+	  no parameter is provided when loading, this is the value that will be
-+	  used.
-+
- config I2C_ALI1535
- 	tristate "ALI 1535"
- 	depends on PCI
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -3,6 +3,8 @@
- # Makefile for the i2c bus drivers.
- #
- 
-+obj-$(CONFIG_I2C_BCM2708)	+= i2c-bcm2708.o
-+
- # ACPI drivers
- obj-$(CONFIG_I2C_SCMI)		+= i2c-scmi.o
- 
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-bcm2708.c
-@@ -0,0 +1,512 @@
-+/*
-+ * Driver for Broadcom BCM2708 BSC Controllers
-+ *
-+ * Copyright (C) 2012 Chris Boot & Frank Buss
-+ *
-+ * This driver is inspired by:
-+ * i2c-ocores.c, by Peter Korsgaard <jacmet@sunsite.dk>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/spinlock.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/slab.h>
-+#include <linux/i2c.h>
-+#include <linux/interrupt.h>
-+#include <linux/sched.h>
-+#include <linux/wait.h>
-+
-+/* BSC register offsets */
-+#define BSC_C			0x00
-+#define BSC_S			0x04
-+#define BSC_DLEN		0x08
-+#define BSC_A			0x0c
-+#define BSC_FIFO		0x10
-+#define BSC_DIV			0x14
-+#define BSC_DEL			0x18
-+#define BSC_CLKT		0x1c
-+
-+/* Bitfields in BSC_C */
-+#define BSC_C_I2CEN		0x00008000
-+#define BSC_C_INTR		0x00000400
-+#define BSC_C_INTT		0x00000200
-+#define BSC_C_INTD		0x00000100
-+#define BSC_C_ST		0x00000080
-+#define BSC_C_CLEAR_1		0x00000020
-+#define BSC_C_CLEAR_2		0x00000010
-+#define BSC_C_READ		0x00000001
-+
-+/* Bitfields in BSC_S */
-+#define BSC_S_CLKT		0x00000200
-+#define BSC_S_ERR		0x00000100
-+#define BSC_S_RXF		0x00000080
-+#define BSC_S_TXE		0x00000040
-+#define BSC_S_RXD		0x00000020
-+#define BSC_S_TXD		0x00000010
-+#define BSC_S_RXR		0x00000008
-+#define BSC_S_TXW		0x00000004
-+#define BSC_S_DONE		0x00000002
-+#define BSC_S_TA		0x00000001
-+
-+#define I2C_WAIT_LOOP_COUNT	200
-+
-+#define DRV_NAME		"bcm2708_i2c"
-+
-+static unsigned int baudrate;
-+module_param(baudrate, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP);
-+MODULE_PARM_DESC(baudrate, "The I2C baudrate");
-+
-+static bool combined = false;
-+module_param(combined, bool, 0644);
-+MODULE_PARM_DESC(combined, "Use combined transactions");
-+
-+struct bcm2708_i2c {
-+	struct i2c_adapter adapter;
-+
-+	spinlock_t lock;
-+	void __iomem *base;
-+	int irq;
-+	struct clk *clk;
-+	u32 cdiv;
-+	u32 clk_tout;
-+
-+	struct completion done;
-+
-+	struct i2c_msg *msg;
-+	int pos;
-+	int nmsgs;
-+	bool error;
-+};
-+
-+static inline u32 bcm2708_rd(struct bcm2708_i2c *bi, unsigned reg)
-+{
-+	return readl(bi->base + reg);
-+}
-+
-+static inline void bcm2708_wr(struct bcm2708_i2c *bi, unsigned reg, u32 val)
-+{
-+	writel(val, bi->base + reg);
-+}
-+
-+static inline void bcm2708_bsc_reset(struct bcm2708_i2c *bi)
-+{
-+	bcm2708_wr(bi, BSC_C, 0);
-+	bcm2708_wr(bi, BSC_S, BSC_S_CLKT | BSC_S_ERR | BSC_S_DONE);
-+}
-+
-+static inline void bcm2708_bsc_fifo_drain(struct bcm2708_i2c *bi)
-+{
-+	while ((bi->pos < bi->msg->len) && (bcm2708_rd(bi, BSC_S) & BSC_S_RXD))
-+		bi->msg->buf[bi->pos++] = bcm2708_rd(bi, BSC_FIFO);
-+}
-+
-+static inline void bcm2708_bsc_fifo_fill(struct bcm2708_i2c *bi)
-+{
-+	while ((bi->pos < bi->msg->len) && (bcm2708_rd(bi, BSC_S) & BSC_S_TXD))
-+		bcm2708_wr(bi, BSC_FIFO, bi->msg->buf[bi->pos++]);
-+}
-+
-+static inline int bcm2708_bsc_setup(struct bcm2708_i2c *bi)
-+{
-+	u32 cdiv, s, clk_tout;
-+	u32 c = BSC_C_I2CEN | BSC_C_INTD | BSC_C_ST | BSC_C_CLEAR_1;
-+	int wait_loops = I2C_WAIT_LOOP_COUNT;
-+
-+	/* Can't call clk_get_rate as it locks a mutex and here we are spinlocked.
-+	 * Use the value that we cached in the probe.
-+	 */
-+	cdiv = bi->cdiv;
-+	clk_tout = bi->clk_tout;
-+
-+	if (bi->msg->flags & I2C_M_RD)
-+		c |= BSC_C_INTR | BSC_C_READ;
-+	else
-+		c |= BSC_C_INTT;
-+
-+	bcm2708_wr(bi, BSC_CLKT, clk_tout);
-+	bcm2708_wr(bi, BSC_DIV, cdiv);
-+	bcm2708_wr(bi, BSC_A, bi->msg->addr);
-+	bcm2708_wr(bi, BSC_DLEN, bi->msg->len);
-+	if (combined)
-+	{
-+		/* Do the next two messages meet combined transaction criteria?
-+		   - Current message is a write, next message is a read
-+		   - Both messages to same slave address
-+		   - Write message can fit inside FIFO (16 bytes or less) */
-+		if ( (bi->nmsgs > 1) &&
-+			!(bi->msg[0].flags & I2C_M_RD) && (bi->msg[1].flags & I2C_M_RD) &&
-+			 (bi->msg[0].addr == bi->msg[1].addr) && (bi->msg[0].len <= 16)) {
-+
-+			/* Clear FIFO */
-+			bcm2708_wr(bi, BSC_C, BSC_C_CLEAR_1);
-+
-+			/* Fill FIFO with entire write message (16 byte FIFO) */
-+			while (bi->pos < bi->msg->len) {
-+				bcm2708_wr(bi, BSC_FIFO, bi->msg->buf[bi->pos++]);
-+			}
-+			/* Start write transfer (no interrupts, don't clear FIFO) */
-+			bcm2708_wr(bi, BSC_C, BSC_C_I2CEN | BSC_C_ST);
-+
-+			/* poll for transfer start bit (should only take 1-20 polls) */
-+			do {
-+				s = bcm2708_rd(bi, BSC_S);
-+			} while (!(s & (BSC_S_TA | BSC_S_ERR | BSC_S_CLKT | BSC_S_DONE)) && --wait_loops >= 0);
-+
-+			/* did we time out or some error occured? */
-+			if (wait_loops < 0 || (s & (BSC_S_ERR | BSC_S_CLKT))) {
-+				return -1;
-+			}
-+
-+			/* Send next read message before the write transfer finishes. */
-+			bi->nmsgs--;
-+			bi->msg++;
-+			bi->pos = 0;
-+			bcm2708_wr(bi, BSC_DLEN, bi->msg->len);
-+			c = BSC_C_I2CEN | BSC_C_INTD | BSC_C_INTR | BSC_C_ST | BSC_C_READ;
-+		}
-+	}
-+	bcm2708_wr(bi, BSC_C, c);
-+
-+	return 0;
-+}
-+
-+static irqreturn_t bcm2708_i2c_interrupt(int irq, void *dev_id)
-+{
-+	struct bcm2708_i2c *bi = dev_id;
-+	bool handled = true;
-+	u32 s;
-+	int ret;
-+
-+	spin_lock(&bi->lock);
-+
-+	/* we may see camera interrupts on the "other" I2C channel
-+		   Just return if we've not sent anything */
-+	if (!bi->nmsgs || !bi->msg) {
-+		goto early_exit;
-+	}
-+
-+	s = bcm2708_rd(bi, BSC_S);
-+
-+	if (s & (BSC_S_CLKT | BSC_S_ERR)) {
-+		bcm2708_bsc_reset(bi);
-+		bi->error = true;
-+
-+		bi->msg = 0; /* to inform the that all work is done */
-+		bi->nmsgs = 0;
-+		/* wake up our bh */
-+		complete(&bi->done);
-+	} else if (s & BSC_S_DONE) {
-+		bi->nmsgs--;
-+
-+		if (bi->msg->flags & I2C_M_RD) {
-+			bcm2708_bsc_fifo_drain(bi);
-+		}
-+
-+		bcm2708_bsc_reset(bi);
-+
-+		if (bi->nmsgs) {
-+			/* advance to next message */
-+			bi->msg++;
-+			bi->pos = 0;
-+			ret = bcm2708_bsc_setup(bi);
-+			if (ret < 0) {
-+				bcm2708_bsc_reset(bi);
-+				bi->error = true;
-+				bi->msg = 0; /* to inform the that all work is done */
-+				bi->nmsgs = 0;
-+				/* wake up our bh */
-+				complete(&bi->done);
-+				goto early_exit;
-+			}
-+		} else {
-+			bi->msg = 0; /* to inform the that all work is done */
-+			bi->nmsgs = 0;
-+			/* wake up our bh */
-+			complete(&bi->done);
-+		}
-+	} else if (s & BSC_S_TXW) {
-+		bcm2708_bsc_fifo_fill(bi);
-+	} else if (s & BSC_S_RXR) {
-+		bcm2708_bsc_fifo_drain(bi);
-+	} else {
-+		handled = false;
-+	}
-+
-+early_exit:
-+	spin_unlock(&bi->lock);
-+
-+	return handled ? IRQ_HANDLED : IRQ_NONE;
-+}
-+
-+static int bcm2708_i2c_master_xfer(struct i2c_adapter *adap,
-+	struct i2c_msg *msgs, int num)
-+{
-+	struct bcm2708_i2c *bi = adap->algo_data;
-+	unsigned long flags;
-+	int ret;
-+
-+	spin_lock_irqsave(&bi->lock, flags);
-+
-+	reinit_completion(&bi->done);
-+	bi->msg = msgs;
-+	bi->pos = 0;
-+	bi->nmsgs = num;
-+	bi->error = false;
-+
-+	ret = bcm2708_bsc_setup(bi);
-+
-+	spin_unlock_irqrestore(&bi->lock, flags);
-+
-+	/* check the result of the setup */
-+	if (ret < 0)
-+	{
-+		dev_err(&adap->dev, "transfer setup timed out\n");
-+		goto error_timeout;
-+	}
-+
-+	ret = wait_for_completion_timeout(&bi->done, adap->timeout);
-+	if (ret == 0) {
-+		dev_err(&adap->dev, "transfer timed out\n");
-+		goto error_timeout;
-+	}
-+
-+	ret = bi->error ? -EIO : num;
-+	return ret;
-+
-+error_timeout:
-+	spin_lock_irqsave(&bi->lock, flags);
-+	bcm2708_bsc_reset(bi);
-+	bi->msg = 0; /* to inform the interrupt handler that there's nothing else to be done */
-+	bi->nmsgs = 0;
-+	spin_unlock_irqrestore(&bi->lock, flags);
-+	return -ETIMEDOUT;
-+}
-+
-+static u32 bcm2708_i2c_functionality(struct i2c_adapter *adap)
-+{
-+	return I2C_FUNC_I2C | /*I2C_FUNC_10BIT_ADDR |*/ I2C_FUNC_SMBUS_EMUL;
-+}
-+
-+static struct i2c_algorithm bcm2708_i2c_algorithm = {
-+	.master_xfer = bcm2708_i2c_master_xfer,
-+	.functionality = bcm2708_i2c_functionality,
-+};
-+
-+static int bcm2708_i2c_probe(struct platform_device *pdev)
-+{
-+	struct resource *regs;
-+	int irq, err = -ENOMEM;
-+	struct clk *clk;
-+	struct bcm2708_i2c *bi;
-+	struct i2c_adapter *adap;
-+	unsigned long bus_hz;
-+	u32 cdiv, clk_tout;
-+	u32 baud;
-+
-+	baud = CONFIG_I2C_BCM2708_BAUDRATE;
-+
-+	if (pdev->dev.of_node) {
-+		u32 bus_clk_rate;
-+		pdev->id = of_alias_get_id(pdev->dev.of_node, "i2c");
-+		if (pdev->id < 0) {
-+			dev_err(&pdev->dev, "alias is missing\n");
-+			return -EINVAL;
-+		}
-+		if (!of_property_read_u32(pdev->dev.of_node,
-+					"clock-frequency", &bus_clk_rate))
-+			baud = bus_clk_rate;
-+		else
-+			dev_warn(&pdev->dev,
-+				"Could not read clock-frequency property\n");
-+	}
-+
-+	if (baudrate)
-+		baud = baudrate;
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs) {
-+		dev_err(&pdev->dev, "could not get IO memory\n");
-+		return -ENXIO;
-+	}
-+
-+	irq = platform_get_irq(pdev, 0);
-+	if (irq < 0) {
-+		dev_err(&pdev->dev, "could not get IRQ\n");
-+		return irq;
-+	}
-+
-+	clk = clk_get(&pdev->dev, NULL);
-+	if (IS_ERR(clk)) {
-+		dev_err(&pdev->dev, "could not find clk: %ld\n", PTR_ERR(clk));
-+		return PTR_ERR(clk);
-+	}
-+
-+	err = clk_prepare_enable(clk);
-+	if (err) {
-+		dev_err(&pdev->dev, "could not enable clk: %d\n", err);
-+		goto out_clk_put;
-+	}
-+
-+	bi = kzalloc(sizeof(*bi), GFP_KERNEL);
-+	if (!bi)
-+		goto out_clk_disable;
-+
-+	platform_set_drvdata(pdev, bi);
-+
-+	adap = &bi->adapter;
-+	adap->class = I2C_CLASS_HWMON | I2C_CLASS_DDC;
-+	adap->algo = &bcm2708_i2c_algorithm;
-+	adap->algo_data = bi;
-+	adap->dev.parent = &pdev->dev;
-+	adap->nr = pdev->id;
-+	strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name));
-+	adap->dev.of_node = pdev->dev.of_node;
-+
-+	switch (pdev->id) {
-+	case 0:
-+		adap->class = I2C_CLASS_HWMON;
-+		break;
-+	case 1:
-+		adap->class = I2C_CLASS_DDC;
-+		break;
-+	case 2:
-+		adap->class = I2C_CLASS_DDC;
-+		break;
-+	default:
-+		dev_err(&pdev->dev, "can only bind to BSC 0, 1 or 2\n");
-+		err = -ENXIO;
-+		goto out_free_bi;
-+	}
-+
-+	spin_lock_init(&bi->lock);
-+	init_completion(&bi->done);
-+
-+	bi->base = ioremap(regs->start, resource_size(regs));
-+	if (!bi->base) {
-+		dev_err(&pdev->dev, "could not remap memory\n");
-+		goto out_free_bi;
-+	}
-+
-+	bi->irq = irq;
-+	bi->clk = clk;
-+
-+	err = request_irq(irq, bcm2708_i2c_interrupt, IRQF_SHARED,
-+			dev_name(&pdev->dev), bi);
-+	if (err) {
-+		dev_err(&pdev->dev, "could not request IRQ: %d\n", err);
-+		goto out_iounmap;
-+	}
-+
-+	bcm2708_bsc_reset(bi);
-+
-+	err = i2c_add_numbered_adapter(adap);
-+	if (err < 0) {
-+		dev_err(&pdev->dev, "could not add I2C adapter: %d\n", err);
-+		goto out_free_irq;
-+	}
-+
-+	bus_hz = clk_get_rate(bi->clk);
-+	cdiv = bus_hz / baud;
-+	if (cdiv > 0xffff) {
-+		cdiv = 0xffff;
-+		baud = bus_hz / cdiv;
-+	}
-+
-+	clk_tout = 35/1000*baud; //35ms timeout as per SMBus specs.
-+	if (clk_tout > 0xffff)
-+		clk_tout = 0xffff;
-+	
-+	bi->cdiv = cdiv;
-+	bi->clk_tout = clk_tout;
-+
-+	dev_info(&pdev->dev, "BSC%d Controller at 0x%08lx (irq %d) (baudrate %d)\n",
-+		pdev->id, (unsigned long)regs->start, irq, baud);
-+
-+	return 0;
-+
-+out_free_irq:
-+	free_irq(bi->irq, bi);
-+out_iounmap:
-+	iounmap(bi->base);
-+out_free_bi:
-+	kfree(bi);
-+out_clk_disable:
-+	clk_disable_unprepare(clk);
-+out_clk_put:
-+	clk_put(clk);
-+	return err;
-+}
-+
-+static int bcm2708_i2c_remove(struct platform_device *pdev)
-+{
-+	struct bcm2708_i2c *bi = platform_get_drvdata(pdev);
-+
-+	platform_set_drvdata(pdev, NULL);
-+
-+	i2c_del_adapter(&bi->adapter);
-+	free_irq(bi->irq, bi);
-+	iounmap(bi->base);
-+	clk_disable_unprepare(bi->clk);
-+	clk_put(bi->clk);
-+	kfree(bi);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id bcm2708_i2c_of_match[] = {
-+        { .compatible = "brcm,bcm2708-i2c" },
-+        {},
-+};
-+MODULE_DEVICE_TABLE(of, bcm2708_i2c_of_match);
-+
-+static struct platform_driver bcm2708_i2c_driver = {
-+	.driver		= {
-+		.name	= DRV_NAME,
-+		.owner	= THIS_MODULE,
-+		.of_match_table = bcm2708_i2c_of_match,
-+	},
-+	.probe		= bcm2708_i2c_probe,
-+	.remove		= bcm2708_i2c_remove,
-+};
-+
-+// module_platform_driver(bcm2708_i2c_driver);
-+
-+
-+static int __init bcm2708_i2c_init(void)
-+{
-+	return platform_driver_register(&bcm2708_i2c_driver);
-+}
-+
-+static void __exit bcm2708_i2c_exit(void)
-+{
-+	platform_driver_unregister(&bcm2708_i2c_driver);
-+}
-+
-+module_init(bcm2708_i2c_init);
-+module_exit(bcm2708_i2c_exit);
-+
-+
-+
-+MODULE_DESCRIPTION("BSC controller driver for Broadcom BCM2708");
-+MODULE_AUTHOR("Chris Boot <bootc@bootc.net>");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:" DRV_NAME);

target/linux/bcm27xx/patches-4.19/950-0053-char-broadcom-Add-vcio-module.patch

@@ -1,220 +0,0 @@
-From 6e169c17c0de4503264186d90aa51639924c6e9c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
-Date: Fri, 26 Jun 2015 14:27:06 +0200
-Subject: [PATCH] char: broadcom: Add vcio module
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add module for accessing the mailbox property channel through
-/dev/vcio. Was previously in bcm2708-vcio.
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
----
- drivers/char/broadcom/Kconfig  |   6 ++
- drivers/char/broadcom/Makefile |   1 +
- drivers/char/broadcom/vcio.c   | 175 +++++++++++++++++++++++++++++++++
- 3 files changed, 182 insertions(+)
- create mode 100644 drivers/char/broadcom/vcio.c
-
---- a/drivers/char/broadcom/Kconfig
-+++ b/drivers/char/broadcom/Kconfig
-@@ -15,6 +15,12 @@ config BCM2708_VCMEM
-         help
-           Helper for videocore memory access and total size allocation.
- 
-+config BCM_VCIO
-+	tristate "Mailbox userspace access"
-+	depends on BCM2835_MBOX
-+	help
-+	  Gives access to the mailbox property channel from userspace.
-+
- endif
- 
- config BCM_VC_SM
---- a/drivers/char/broadcom/Makefile
-+++ b/drivers/char/broadcom/Makefile
-@@ -1,4 +1,5 @@
- obj-$(CONFIG_BCM2708_VCMEM)	+= vc_mem.o
-+obj-$(CONFIG_BCM_VCIO)		+= vcio.o
- obj-$(CONFIG_BCM_VC_SM)         += vc_sm/
- 
- obj-$(CONFIG_BCM2835_DEVGPIOMEM)+= bcm2835-gpiomem.o
---- /dev/null
-+++ b/drivers/char/broadcom/vcio.c
-@@ -0,0 +1,175 @@
-+/*
-+ *  Copyright (C) 2010 Broadcom
-+ *  Copyright (C) 2015 Noralf Trønnes
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-+
-+#include <linux/cdev.h>
-+#include <linux/device.h>
-+#include <linux/fs.h>
-+#include <linux/init.h>
-+#include <linux/ioctl.h>
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/uaccess.h>
-+#include <soc/bcm2835/raspberrypi-firmware.h>
-+
-+#define MBOX_CHAN_PROPERTY 8
-+
-+#define VCIO_IOC_MAGIC 100
-+#define IOCTL_MBOX_PROPERTY _IOWR(VCIO_IOC_MAGIC, 0, char *)
-+
-+static struct {
-+	dev_t devt;
-+	struct cdev cdev;
-+	struct class *class;
-+	struct rpi_firmware *fw;
-+} vcio;
-+
-+static int vcio_user_property_list(void *user)
-+{
-+	u32 *buf, size;
-+	int ret;
-+
-+	/* The first 32-bit is the size of the buffer */
-+	if (copy_from_user(&size, user, sizeof(size)))
-+		return -EFAULT;
-+
-+	buf = kmalloc(size, GFP_KERNEL);
-+	if (!buf)
-+		return -ENOMEM;
-+
-+	if (copy_from_user(buf, user, size)) {
-+		kfree(buf);
-+		return -EFAULT;
-+	}
-+
-+	/* Strip off protocol encapsulation */
-+	ret = rpi_firmware_property_list(vcio.fw, &buf[2], size - 12);
-+	if (ret) {
-+		kfree(buf);
-+		return ret;
-+	}
-+
-+	buf[1] = RPI_FIRMWARE_STATUS_SUCCESS;
-+	if (copy_to_user(user, buf, size))
-+		ret = -EFAULT;
-+
-+	kfree(buf);
-+
-+	return ret;
-+}
-+
-+static int vcio_device_open(struct inode *inode, struct file *file)
-+{
-+	try_module_get(THIS_MODULE);
-+
-+	return 0;
-+}
-+
-+static int vcio_device_release(struct inode *inode, struct file *file)
-+{
-+	module_put(THIS_MODULE);
-+
-+	return 0;
-+}
-+
-+static long vcio_device_ioctl(struct file *file, unsigned int ioctl_num,
-+			      unsigned long ioctl_param)
-+{
-+	switch (ioctl_num) {
-+	case IOCTL_MBOX_PROPERTY:
-+		return vcio_user_property_list((void *)ioctl_param);
-+	default:
-+		pr_err("unknown ioctl: %d\n", ioctl_num);
-+		return -EINVAL;
-+	}
-+}
-+
-+const struct file_operations vcio_fops = {
-+	.unlocked_ioctl = vcio_device_ioctl,
-+	.open = vcio_device_open,
-+	.release = vcio_device_release,
-+};
-+
-+static int __init vcio_init(void)
-+{
-+	struct device_node *np;
-+	static struct device *dev;
-+	int ret;
-+
-+	np = of_find_compatible_node(NULL, NULL,
-+				     "raspberrypi,bcm2835-firmware");
-+/* Uncomment this when we only boot with Device Tree
-+	if (!of_device_is_available(np))
-+		return -ENODEV;
-+*/
-+	vcio.fw = rpi_firmware_get(np);
-+	if (!vcio.fw)
-+		return -ENODEV;
-+
-+	ret = alloc_chrdev_region(&vcio.devt, 0, 1, "vcio");
-+	if (ret) {
-+		pr_err("failed to allocate device number\n");
-+		return ret;
-+	}
-+
-+	cdev_init(&vcio.cdev, &vcio_fops);
-+	vcio.cdev.owner = THIS_MODULE;
-+	ret = cdev_add(&vcio.cdev, vcio.devt, 1);
-+	if (ret) {
-+		pr_err("failed to register device\n");
-+		goto err_unregister_chardev;
-+	}
-+
-+	/*
-+	 * Create sysfs entries
-+	 * 'bcm2708_vcio' is used for backwards compatibility so we don't break
-+	 * userspace. Raspian has a udev rule that changes the permissions.
-+	 */
-+	vcio.class = class_create(THIS_MODULE, "bcm2708_vcio");
-+	if (IS_ERR(vcio.class)) {
-+		ret = PTR_ERR(vcio.class);
-+		pr_err("failed to create class\n");
-+		goto err_cdev_del;
-+	}
-+
-+	dev = device_create(vcio.class, NULL, vcio.devt, NULL, "vcio");
-+	if (IS_ERR(dev)) {
-+		ret = PTR_ERR(dev);
-+		pr_err("failed to create device\n");
-+		goto err_class_destroy;
-+	}
-+
-+	return 0;
-+
-+err_class_destroy:
-+	class_destroy(vcio.class);
-+err_cdev_del:
-+	cdev_del(&vcio.cdev);
-+err_unregister_chardev:
-+	unregister_chrdev_region(vcio.devt, 1);
-+
-+	return ret;
-+}
-+module_init(vcio_init);
-+
-+static void __exit vcio_exit(void)
-+{
-+	device_destroy(vcio.class, vcio.devt);
-+	class_destroy(vcio.class);
-+	cdev_del(&vcio.cdev);
-+	unregister_chrdev_region(vcio.devt, 1);
-+}
-+module_exit(vcio_exit);
-+
-+MODULE_AUTHOR("Gray Girling");
-+MODULE_AUTHOR("Noralf Trønnes");
-+MODULE_DESCRIPTION("Mailbox userspace access");
-+MODULE_LICENSE("GPL");

target/linux/bcm27xx/patches-4.19/950-0054-firmware-bcm2835-Support-ARCH_BCM270x.patch

@@ -1,83 +0,0 @@
-From 6f190ee10a1d3276450e6190bb6d75a03040dcef Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
-Date: Fri, 26 Jun 2015 14:25:01 +0200
-Subject: [PATCH] firmware: bcm2835: Support ARCH_BCM270x
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Support booting without Device Tree.
-Turn on USB power.
-Load driver early because of lacking support for deferred probing
-in many drivers.
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
-
-firmware: bcm2835: Don't turn on USB power
-
-The raspberrypi-power driver is now used to turn on USB power.
-
-This partly reverts commit:
-firmware: bcm2835: Support ARCH_BCM270x
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
----
- drivers/firmware/raspberrypi.c | 19 +++++++++++++++++--
- 1 file changed, 17 insertions(+), 2 deletions(-)
-
---- a/drivers/firmware/raspberrypi.c
-+++ b/drivers/firmware/raspberrypi.c
-@@ -31,6 +31,8 @@ struct rpi_firmware {
- 	u32 enabled;
- };
- 
-+static struct platform_device *g_pdev;
-+
- static DEFINE_MUTEX(transaction_lock);
- 
- static void response_callback(struct mbox_client *cl, void *msg)
-@@ -230,6 +232,7 @@ static int rpi_firmware_probe(struct pla
- 	init_completion(&fw->c);
- 
- 	platform_set_drvdata(pdev, fw);
-+	g_pdev = pdev;
- 
- 	rpi_firmware_print_firmware_revision(fw);
- 	rpi_register_hwmon_driver(dev, fw);
-@@ -244,6 +247,7 @@ static int rpi_firmware_remove(struct pl
- 	platform_device_unregister(rpi_hwmon);
- 	rpi_hwmon = NULL;
- 	mbox_free_channel(fw->chan);
-+	g_pdev = NULL;
- 
- 	return 0;
- }
-@@ -256,7 +260,7 @@ static int rpi_firmware_remove(struct pl
-  */
- struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node)
- {
--	struct platform_device *pdev = of_find_device_by_node(firmware_node);
-+	struct platform_device *pdev = g_pdev;
- 
- 	if (!pdev)
- 		return NULL;
-@@ -279,7 +283,18 @@ static struct platform_driver rpi_firmwa
- 	.probe		= rpi_firmware_probe,
- 	.remove		= rpi_firmware_remove,
- };
--module_platform_driver(rpi_firmware_driver);
-+
-+static int __init rpi_firmware_init(void)
-+{
-+	return platform_driver_register(&rpi_firmware_driver);
-+}
-+subsys_initcall(rpi_firmware_init);
-+
-+static void __init rpi_firmware_exit(void)
-+{
-+	platform_driver_unregister(&rpi_firmware_driver);
-+}
-+module_exit(rpi_firmware_exit);
- 
- MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
- MODULE_DESCRIPTION("Raspberry Pi firmware driver");

target/linux/bcm27xx/patches-4.19/950-0055-scripts-Add-mkknlimg-and-knlinfo-scripts-from-tools-.patch

@@ -1,533 +0,0 @@
-From 28951ab97e67b20640b183364d2396e91e8a6148 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Mon, 11 May 2015 09:00:42 +0100
-Subject: [PATCH] scripts: Add mkknlimg and knlinfo scripts from tools
- repo
-
-The Raspberry Pi firmware looks for a trailer on the kernel image to
-determine whether it was compiled with Device Tree support enabled.
-If the firmware finds a kernel without this trailer, or which has a
-trailer indicating that it isn't DT-capable, it disables DT support
-and reverts to using ATAGs.
-
-The mkknlimg utility adds that trailer, having first analysed the
-image to look for signs of DT support and the kernel version string.
-
-knlinfo displays the contents of the trailer in the given kernel image.
-
-scripts/mkknlimg: Add support for ARCH_BCM2835
-
-Add a new trailer field indicating whether this is an ARCH_BCM2835
-build, as opposed to MACH_BCM2708/9. If the loader finds this flag
-is set it changes the default base dtb file name from bcm270x...
-to bcm283y...
-
-Also update knlinfo to show the status of the field.
-
-scripts/mkknlimg: Improve ARCH_BCM2835 detection
-
-The board support code contains sufficient strings to be able to
-distinguish 2708 vs. 2835 builds, so remove the check for
-bcm2835-pm-wdt which could exist in either.
-
-Also, since the canned configuration is no longer built in (it's
-a module), remove the config string checking.
-
-See: https://github.com/raspberrypi/linux/issues/1157
-
-scripts: Multi-platform support for mkknlimg and knlinfo
-
-The firmware uses tags in the kernel trailer to choose which dtb file
-to load. Current firmware loads bcm2835-*.dtb if the '283x' tag is true,
-otherwise it loads bcm270*.dtb. This scheme breaks if an image supports
-multiple platforms.
-
-This patch adds '270X' and '283X' tags to indicate support for RPi and
-upstream platforms, respectively. '283x' (note lower case 'x') is left
-for old firmware, and is only set if the image only supports upstream
-builds.
-
-scripts/mkknlimg: Append a trailer for all input
-
-Now that the firmware assumes an unsigned kernel is DT-capable, it is
-helpful to be able to mark a kernel as being non-DT-capable.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
-
-scripts/knlinfo: Decode DDTK atom
-
-Show the DDTK atom as being a boolean.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
-
-mkknlimg: Retain downstream-kernel detection
-
-With the death of ARCH_BCM2708 and ARCH_BCM2709, a new way is needed to
-determine if this is a "downstream" build that wants the firmware to
-load a bcm27xx .dtb. The vc_cma driver is used downstream but not
-upstream, making vc_cma_init a suitable predicate symbol.
-
-mkknlimg: Find some more downstream-only strings
-
-See: https://github.com/raspberrypi/linux/issues/1920
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
-
-scripts: Update mkknlimg, just in case
-
-With the removal of the vc_cma driver, mkknlimg lost an indication that
-the user had built a downstream kernel. Update the script, adding a few
-more key strings, in case it is still being used.
-
-Note that mkknlimg is now deprecated, except to tag kernels as upstream
-(283x), and thus requiring upstream DTBs.
-
-See: https://github.com/raspberrypi/linux/issues/2239
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- scripts/knlinfo  | 171 +++++++++++++++++++++++++++++++
- scripts/mkknlimg | 262 +++++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 433 insertions(+)
- create mode 100755 scripts/knlinfo
- create mode 100755 scripts/mkknlimg
-
---- /dev/null
-+++ b/scripts/knlinfo
-@@ -0,0 +1,171 @@
-+#!/usr/bin/env perl
-+# ----------------------------------------------------------------------
-+# knlinfo by Phil Elwell for Raspberry Pi
-+#
-+# (c) 2014,2015 Raspberry Pi (Trading) Limited <info@raspberrypi.org>
-+#
-+# Licensed under the terms of the GNU General Public License.
-+# ----------------------------------------------------------------------
-+
-+use strict;
-+use integer;
-+
-+use Fcntl ":seek";
-+
-+my $trailer_magic = 'RPTL';
-+
-+my %atom_formats =
-+(
-+    'DDTK' => \&format_bool,
-+    'DTOK' => \&format_bool,
-+    'KVer' => \&format_string,
-+    '270X' => \&format_bool,
-+    '283X' => \&format_bool,
-+    '283x' => \&format_bool,
-+);
-+
-+if (@ARGV != 1)
-+{
-+	print ("Usage: knlinfo <kernel image>\n");
-+	exit(1);
-+}
-+
-+my $kernel_file = $ARGV[0];
-+
-+
-+my ($atoms, $pos) = read_trailer($kernel_file);
-+
-+exit(1) if (!$atoms);
-+
-+printf("Kernel trailer found at %d/0x%x:\n", $pos, $pos);
-+
-+foreach my $atom (@$atoms)
-+{
-+    printf("  %s: %s\n", $atom->[0], format_atom($atom));
-+}
-+
-+exit(0);
-+
-+sub read_trailer
-+{
-+	my ($kernel_file) = @_;
-+	my $fh;
-+
-+	if (!open($fh, '<', $kernel_file))
-+	{
-+		print ("* Failed to open '$kernel_file'\n");
-+		return undef;
-+	}
-+
-+	if (!seek($fh, -12, SEEK_END))
-+	{
-+		print ("* seek error in '$kernel_file'\n");
-+		return undef;
-+	}
-+
-+	my $last_bytes;
-+	sysread($fh, $last_bytes, 12);
-+
-+	my ($trailer_len, $data_len, $magic) = unpack('VVa4', $last_bytes);
-+
-+	if (($magic ne $trailer_magic) || ($data_len != 4))
-+	{
-+		print ("* no trailer\n");
-+		return undef;
-+	}
-+	if (!seek($fh, -12, SEEK_END))
-+	{
-+		print ("* seek error in '$kernel_file'\n");
-+		return undef;
-+	}
-+
-+	$trailer_len -= 12;
-+
-+	while ($trailer_len > 0)
-+	{
-+		if ($trailer_len < 8)
-+		{
-+			print ("* truncated atom header in trailer\n");
-+			return undef;
-+		}
-+		if (!seek($fh, -8, SEEK_CUR))
-+		{
-+			print ("* seek error in '$kernel_file'\n");
-+			return undef;
-+		}
-+		$trailer_len -= 8;
-+
-+		my $atom_hdr;
-+		sysread($fh, $atom_hdr, 8);
-+		my ($atom_len, $atom_type) = unpack('Va4', $atom_hdr);
-+
-+		if ($trailer_len < $atom_len)
-+		{
-+			print ("* truncated atom data in trailer\n");
-+			return undef;
-+		}
-+
-+		my $rounded_len = (($atom_len + 3) & ~3);
-+		if (!seek($fh, -(8 + $rounded_len), SEEK_CUR))
-+		{
-+			print ("* seek error in '$kernel_file'\n");
-+			return undef;
-+		}
-+		$trailer_len -= $rounded_len;
-+
-+		my $atom_data;
-+		sysread($fh, $atom_data, $atom_len);
-+
-+		if (!seek($fh, -$atom_len, SEEK_CUR))
-+		{
-+			print ("* seek error in '$kernel_file'\n");
-+			return undef;
-+		}
-+
-+		push @$atoms, [ $atom_type, $atom_data ];
-+	}
-+
-+ 	if (($$atoms[-1][0] eq "\x00\x00\x00\x00") &&
-+	    ($$atoms[-1][1] eq ""))
-+	{
-+		pop @$atoms;
-+	}
-+	else
-+	{
-+		print ("* end marker missing from trailer\n");
-+	}
-+
-+	return ($atoms, tell($fh));
-+}
-+
-+sub format_atom
-+{
-+    my ($atom) = @_;
-+
-+    my $format_func = $atom_formats{$atom->[0]} || \&format_hex;
-+    return $format_func->($atom->[1]);
-+}
-+
-+sub format_bool
-+{
-+    my ($data) = @_;
-+    return unpack('V', $data) ? 'y' : 'n';
-+}
-+
-+sub format_int
-+{
-+    my ($data) = @_;
-+    return unpack('V', $data);
-+}
-+
-+sub format_string
-+{
-+    my ($data) = @_;
-+    return '"'.$data.'"';
-+}
-+
-+sub format_hex
-+{
-+    my ($data) = @_;
-+    return unpack('H*', $data);
-+}
---- /dev/null
-+++ b/scripts/mkknlimg
-@@ -0,0 +1,262 @@
-+#!/usr/bin/env perl
-+# ----------------------------------------------------------------------
-+# mkknlimg by Phil Elwell for Raspberry Pi
-+# based on extract-ikconfig by Dick Streefland
-+#
-+# (c) 2009,2010 Dick Streefland <dick@streefland.net>
-+# (c) 2014,2015 Raspberry Pi (Trading) Limited <info@raspberrypi.org>
-+#
-+# Licensed under the terms of the GNU General Public License.
-+# ----------------------------------------------------------------------
-+
-+use strict;
-+use warnings;
-+use integer;
-+
-+use constant FLAG_PI   => 0x01;
-+use constant FLAG_DTOK => 0x02;
-+use constant FLAG_DDTK => 0x04;
-+use constant FLAG_270X => 0x08;
-+use constant FLAG_283X => 0x10;
-+
-+my $trailer_magic = 'RPTL';
-+
-+my $tmpfile1 = "/tmp/mkknlimg_$$.1";
-+my $tmpfile2 = "/tmp/mkknlimg_$$.2";
-+
-+my $dtok = 0;
-+my $ddtk = 0;
-+my $is_270x = 0;
-+my $is_283x = 0;
-+
-+while (@ARGV && ($ARGV[0] =~ /^-/))
-+{
-+    my $arg = shift(@ARGV);
-+    if ($arg eq '--dtok')
-+    {
-+	$dtok = 1;
-+    }
-+    elsif ($arg eq '--ddtk')
-+    {
-+	$ddtk = 1;
-+    }
-+    elsif ($arg eq '--270x')
-+    {
-+	$is_270x = 1;
-+    }
-+    elsif ($arg eq '--283x')
-+    {
-+	$is_283x = 1;
-+    }
-+    else
-+    {
-+	print ("* Unknown option '$arg'\n");
-+	usage();
-+    }
-+}
-+
-+usage() if (@ARGV != 2);
-+
-+my $kernel_file = $ARGV[0];
-+my $out_file = $ARGV[1];
-+
-+if (! -r $kernel_file)
-+{
-+    print ("* File '$kernel_file' not found\n");
-+    usage();
-+}
-+
-+my $wanted_strings =
-+{
-+	'brcm,bcm2835-mmc' => FLAG_PI,
-+	'brcm,bcm2835-sdhost' => FLAG_PI,
-+	'brcm,bcm2835-gpio' => FLAG_PI | FLAG_DTOK,
-+	'brcm,bcm2708-fb'   => FLAG_PI | FLAG_DTOK | FLAG_270X,
-+	'brcm,bcm2708-usb'  => FLAG_PI | FLAG_DTOK | FLAG_270X,
-+	'brcm,bcm2835' => FLAG_PI | FLAG_DTOK | FLAG_283X,
-+	'brcm,bcm2836' => FLAG_PI | FLAG_DTOK | FLAG_283X,
-+	'brcm,bcm2837' => FLAG_PI | FLAG_DTOK | FLAG_283X,
-+	'of_cfs_init' => FLAG_DTOK | FLAG_DDTK,
-+};
-+
-+my $res = try_extract($kernel_file, $tmpfile1);
-+$res ||= try_decompress('\037\213\010', 'xy',    'gunzip', 0,
-+			$kernel_file, $tmpfile1, $tmpfile2);
-+$res ||= try_decompress('\3757zXZ\000', 'abcde', 'unxz --single-stream', -1,
-+			$kernel_file, $tmpfile1, $tmpfile2);
-+$res ||= try_decompress('BZh',          'xy',    'bunzip2', 0,
-+			$kernel_file, $tmpfile1, $tmpfile2);
-+$res ||= try_decompress('\135\0\0\0',   'xxx',   'unlzma', 0,
-+			$kernel_file, $tmpfile1, $tmpfile2);
-+$res ||= try_decompress('\211\114\132', 'xy',    'lzop -d', 0,
-+			$kernel_file, $tmpfile1, $tmpfile2);
-+$res ||= try_decompress('\002\041\114\030', 'xy',    'lz4 -d', 1,
-+			$kernel_file, $tmpfile1, $tmpfile2);
-+
-+my $append_trailer;
-+my $trailer;
-+my $kver = '?';
-+
-+$append_trailer = 1;
-+
-+if ($res)
-+{
-+    $kver = $res->{'kver'} || '?';
-+    my $flags = $res->{'flags'};
-+    print("Version: $kver\n");
-+
-+    if ($flags & FLAG_PI)
-+    {
-+	$dtok ||= ($flags & FLAG_DTOK) != 0;
-+	$is_270x ||= ($flags & FLAG_270X) != 0;
-+	$is_283x ||= ($flags & FLAG_283X) != 0;
-+	$ddtk ||= ($flags & FLAG_DDTK) != 0;
-+    }
-+    else
-+    {
-+	print ("* This doesn't look like a Raspberry Pi kernel.\n");
-+    }
-+}
-+elsif (!$dtok)
-+{
-+    print ("* Is this a valid kernel?\n");
-+}
-+
-+if ($append_trailer)
-+{
-+    printf("DT: %s\n", $dtok ? "y" : "n");
-+    printf("DDT: %s\n", $ddtk ? "y" : "n");
-+    printf("270x: %s\n", $is_270x ? "y" : "n");
-+    printf("283x: %s\n", $is_283x ? "y" : "n");
-+
-+    my @atoms;
-+
-+    push @atoms, [ $trailer_magic, pack('V', 0) ];
-+    push @atoms, [ 'KVer', $kver ];
-+    push @atoms, [ 'DTOK', pack('V', $dtok) ];
-+    push @atoms, [ 'DDTK', pack('V', $ddtk) ];
-+    push @atoms, [ '270X', pack('V', $is_270x) ];
-+    push @atoms, [ '283X', pack('V', $is_283x) ];
-+    push @atoms, [ '283x', pack('V', $is_283x && !$is_270x) ];
-+
-+    $trailer = pack_trailer(\@atoms);
-+    $atoms[0]->[1] = pack('V', length($trailer));
-+
-+    $trailer = pack_trailer(\@atoms);
-+}
-+
-+my $ofh;
-+my $total_len = 0;
-+
-+if ($out_file eq $kernel_file)
-+{
-+    die "* Failed to open '$out_file' for append\n"
-+	if (!open($ofh, '>>', $out_file));
-+    $total_len = tell($ofh);
-+}
-+else
-+{
-+    die "* Failed to open '$kernel_file'\n"
-+	if (!open(my $ifh, '<', $kernel_file));
-+    die "* Failed to create '$out_file'\n"
-+	if (!open($ofh, '>', $out_file));
-+
-+    my $copybuf;
-+    while (1)
-+    {
-+	my $bytes = sysread($ifh, $copybuf, 64*1024);
-+	last if (!$bytes);
-+	syswrite($ofh, $copybuf, $bytes);
-+	$total_len += $bytes;
-+    }
-+    close($ifh);
-+}
-+
-+if ($trailer)
-+{
-+    # Pad to word-alignment
-+    syswrite($ofh, "\x000\x000\x000", (-$total_len & 0x3));
-+    syswrite($ofh, $trailer);
-+}
-+
-+close($ofh);
-+
-+exit($trailer ? 0 : 1);
-+
-+END {
-+	unlink($tmpfile1) if ($tmpfile1);
-+	unlink($tmpfile2) if ($tmpfile2);
-+}
-+
-+
-+sub usage
-+{
-+	print ("Usage: mkknlimg [--dtok] [--270x] [--283x] <vmlinux|zImage|bzImage> <outfile>\n");
-+	exit(1);
-+}
-+
-+sub try_extract
-+{
-+	my ($knl, $tmp) = @_;
-+
-+	my $ver = `strings "$knl" | grep -a -E "^Linux version [1-9]"`;
-+
-+	return undef if (!$ver);
-+
-+	chomp($ver);
-+
-+	my $res = { 'kver'=>$ver };
-+	$res->{'flags'} = strings_to_flags($knl, $wanted_strings);
-+
-+	return $res;
-+}
-+
-+
-+sub try_decompress
-+{
-+	my ($magic, $subst, $zcat, $idx, $knl, $tmp1, $tmp2) = @_;
-+
-+	my $pos = `tr "$magic\n$subst" "\n$subst=" < "$knl" | grep -abo "^$subst"`;
-+	if ($pos)
-+	{
-+		chomp($pos);
-+		$pos = (split(/[\r\n]+/, $pos))[$idx];
-+		return undef if (!defined($pos));
-+		$pos =~ s/:.*[\r\n]*$//s;
-+		my $cmd = "tail -c+$pos \"$knl\" | $zcat > $tmp2 2> /dev/null";
-+		my $err = (system($cmd) >> 8);
-+		return undef if (($err != 0) && ($err != 2));
-+
-+		return try_extract($tmp2, $tmp1);
-+	}
-+
-+	return undef;
-+}
-+
-+sub strings_to_flags
-+{
-+	my ($knl, $strings) = @_;
-+	my $string_pattern = '^('.join('|', keys(%$strings)).')$';
-+	my $flags = 0;
-+
-+	my @matches = `strings \"$knl\" | grep -E \"$string_pattern\"`;
-+	foreach my $match (@matches)
-+	{
-+	    chomp($match);
-+	    $flags |= $strings->{$match};
-+	}
-+
-+	return $flags;
-+}
-+
-+sub pack_trailer
-+{
-+	my ($atoms) = @_;
-+	my $trailer = pack('VV', 0, 0);
-+	for (my $i = $#$atoms; $i>=0; $i--)
-+	{
-+		my $atom = $atoms->[$i];
-+		$trailer .= pack('a*x!4Va4', $atom->[1], length($atom->[1]), $atom->[0]);
-+	}
-+	return $trailer;
-+}

target/linux/bcm27xx/patches-4.19/950-0057-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch

@@ -1,168 +0,0 @@
-From 7181db1685aa67e127f80fe9607270d3c87aa3b9 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Fri, 6 Feb 2015 13:50:57 +0000
-Subject: [PATCH] BCM270x_DT: Add pwr_led, and the required "input"
- trigger
-
-The "input" trigger makes the associated GPIO an input.  This is to support
-the Raspberry Pi PWR LED, which is driven by external hardware in normal use.
-
-N.B. pwr_led is not available on Model A or B boards.
-
-leds-gpio: Implement the brightness_get method
-
-The power LED uses some clever logic that means it is driven
-by a voltage measuring circuit when configured as input, otherwise
-it is driven by the GPIO output value. This patch wires up the
-brightness_get method for leds-gpio so that user-space can monitor
-the LED value via /sys/class/gpio/led1/brightness. Using the input
-trigger this returns an indication of the system power health,
-otherwise it is just whatever value the trigger has written most
-recently.
-
-See: https://github.com/raspberrypi/linux/issues/1064
----
- drivers/leds/leds-gpio.c             | 17 ++++++++-
- drivers/leds/trigger/Kconfig         |  7 ++++
- drivers/leds/trigger/Makefile        |  1 +
- drivers/leds/trigger/ledtrig-input.c | 55 ++++++++++++++++++++++++++++
- include/linux/leds.h                 |  3 ++
- 5 files changed, 82 insertions(+), 1 deletion(-)
- create mode 100644 drivers/leds/trigger/ledtrig-input.c
-
---- a/drivers/leds/leds-gpio.c
-+++ b/drivers/leds/leds-gpio.c
-@@ -50,8 +50,15 @@ static void gpio_led_set(struct led_clas
- 		led_dat->platform_gpio_blink_set(led_dat->gpiod, level,
- 						 NULL, NULL);
- 		led_dat->blinking = 0;
-+	} else if (led_dat->cdev.flags & SET_GPIO_INPUT) {
-+		gpiod_direction_input(led_dat->gpiod);
-+		led_dat->cdev.flags &= ~SET_GPIO_INPUT;
-+	} else if (led_dat->cdev.flags & SET_GPIO_OUTPUT) {
-+		gpiod_direction_output(led_dat->gpiod, level);
-+		led_dat->cdev.flags &= ~SET_GPIO_OUTPUT;
- 	} else {
--		if (led_dat->can_sleep)
-+		if (led_dat->can_sleep ||
-+			(led_dat->cdev.flags & (SET_GPIO_INPUT | SET_GPIO_OUTPUT) ))
- 			gpiod_set_value_cansleep(led_dat->gpiod, level);
- 		else
- 			gpiod_set_value(led_dat->gpiod, level);
-@@ -65,6 +72,13 @@ static int gpio_led_set_blocking(struct
- 	return 0;
- }
- 
-+static enum led_brightness gpio_led_get(struct led_classdev *led_cdev)
-+{
-+	struct gpio_led_data *led_dat =
-+		container_of(led_cdev, struct gpio_led_data, cdev);
-+	return gpiod_get_value_cansleep(led_dat->gpiod) ? LED_FULL : LED_OFF;
-+}
-+
- static int gpio_blink_set(struct led_classdev *led_cdev,
- 	unsigned long *delay_on, unsigned long *delay_off)
- {
-@@ -122,6 +136,7 @@ static int create_gpio_led(const struct
- 		led_dat->platform_gpio_blink_set = blink_set;
- 		led_dat->cdev.blink_set = gpio_blink_set;
- 	}
-+	led_dat->cdev.brightness_get = gpio_led_get;
- 	if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP) {
- 		state = gpiod_get_value_cansleep(led_dat->gpiod);
- 		if (state < 0)
---- a/drivers/leds/trigger/Kconfig
-+++ b/drivers/leds/trigger/Kconfig
-@@ -113,6 +113,13 @@ config LEDS_TRIGGER_CAMERA
- 	  This enables direct flash/torch on/off by the driver, kernel space.
- 	  If unsure, say Y.
- 
-+config LEDS_TRIGGER_INPUT
-+	tristate "LED Input Trigger"
-+	depends on LEDS_TRIGGERS
-+	help
-+	  This allows the GPIOs assigned to be LEDs to be initialised to inputs.
-+	  If unsure, say Y.
-+
- config LEDS_TRIGGER_PANIC
- 	bool "LED Panic Trigger"
- 	help
---- a/drivers/leds/trigger/Makefile
-+++ b/drivers/leds/trigger/Makefile
-@@ -11,5 +11,6 @@ obj-$(CONFIG_LEDS_TRIGGER_ACTIVITY)	+= l
- obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
- obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT)	+= ledtrig-transient.o
- obj-$(CONFIG_LEDS_TRIGGER_CAMERA)	+= ledtrig-camera.o
-+obj-$(CONFIG_LEDS_TRIGGER_INPUT)	+= ledtrig-input.o
- obj-$(CONFIG_LEDS_TRIGGER_PANIC)	+= ledtrig-panic.o
- obj-$(CONFIG_LEDS_TRIGGER_NETDEV)	+= ledtrig-netdev.o
---- /dev/null
-+++ b/drivers/leds/trigger/ledtrig-input.c
-@@ -0,0 +1,55 @@
-+/*
-+ * Set LED GPIO to Input "Trigger"
-+ *
-+ * Copyright 2015 Phil Elwell <phil@raspberrypi.org>
-+ *
-+ * Based on Nick Forbes's ledtrig-default-on.c.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/leds.h>
-+#include <linux/gpio.h>
-+#include "../leds.h"
-+
-+static int input_trig_activate(struct led_classdev *led_cdev)
-+{
-+	led_cdev->flags |= SET_GPIO_INPUT;
-+	led_set_brightness(led_cdev, 0);
-+	return 0;
-+}
-+
-+static void input_trig_deactivate(struct led_classdev *led_cdev)
-+{
-+	led_cdev->flags |= SET_GPIO_OUTPUT;
-+	led_set_brightness(led_cdev, 0);
-+}
-+
-+static struct led_trigger input_led_trigger = {
-+	.name     = "input",
-+	.activate = input_trig_activate,
-+	.deactivate = input_trig_deactivate,
-+};
-+
-+static int __init input_trig_init(void)
-+{
-+	return led_trigger_register(&input_led_trigger);
-+}
-+
-+static void __exit input_trig_exit(void)
-+{
-+	led_trigger_unregister(&input_led_trigger);
-+}
-+
-+module_init(input_trig_init);
-+module_exit(input_trig_exit);
-+
-+MODULE_AUTHOR("Phil Elwell <phil@raspberrypi.org>");
-+MODULE_DESCRIPTION("Set LED GPIO to Input \"trigger\"");
-+MODULE_LICENSE("GPL");
---- a/include/linux/leds.h
-+++ b/include/linux/leds.h
-@@ -50,6 +50,9 @@ struct led_classdev {
- #define LED_PANIC_INDICATOR	BIT(20)
- #define LED_BRIGHT_HW_CHANGED	BIT(21)
- #define LED_RETAIN_AT_SHUTDOWN	BIT(22)
-+	/* Additions for Raspberry Pi PWR LED */
-+#define SET_GPIO_INPUT		BIT(30)
-+#define SET_GPIO_OUTPUT		BIT(31)
- 
- 	/* set_brightness_work / blink_timer flags, atomic, private. */
- 	unsigned long		work_flags;

target/linux/bcm27xx/patches-4.19/950-0058-fbdev-add-FBIOCOPYAREA-ioctl.patch

@@ -1,265 +0,0 @@
-From 5269119dadfc6874aec51fed4468c73f1b0187a2 Mon Sep 17 00:00:00 2001
-From: Siarhei Siamashka <siarhei.siamashka@gmail.com>
-Date: Mon, 17 Jun 2013 13:32:11 +0300
-Subject: [PATCH] fbdev: add FBIOCOPYAREA ioctl
-
-Based on the patch authored by Ali Gholami Rudi at
-    https://lkml.org/lkml/2009/7/13/153
-
-Provide an ioctl for userspace applications, but only if this operation
-is hardware accelerated (otherwide it does not make any sense).
-
-Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
-
-bcm2708_fb: Add ioctl for reading gpu memory through dma
----
- drivers/video/fbdev/bcm2708_fb.c | 119 ++++++++++++++++++++++++++++++-
- drivers/video/fbdev/core/fbmem.c |  36 ++++++++++
- include/uapi/linux/fb.h          |  12 ++++
- 3 files changed, 166 insertions(+), 1 deletion(-)
-
---- a/drivers/video/fbdev/bcm2708_fb.c
-+++ b/drivers/video/fbdev/bcm2708_fb.c
-@@ -31,8 +31,10 @@
- #include <linux/console.h>
- #include <linux/debugfs.h>
- #include <asm/sizes.h>
-+#include <linux/uaccess.h>
- #include <linux/io.h>
- #include <linux/dma-mapping.h>
-+#include <linux/cred.h>
- #include <soc/bcm2835/raspberrypi-firmware.h>
- 
- //#define BCM2708_FB_DEBUG
-@@ -95,6 +97,7 @@ struct bcm2708_fb {
- 	wait_queue_head_t dma_waitq;
- 	struct bcm2708_fb_stats stats;
- 	unsigned long fb_bus_address;
-+	struct { u32 base, length; } gpu;
- };
- 
- #define to_bcm2708(info)	container_of(info, struct bcm2708_fb, fb)
-@@ -439,7 +442,118 @@ static int bcm2708_fb_pan_display(struct
- 	return result;
- }
- 
--static int bcm2708_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg)
-+static void dma_memcpy(struct bcm2708_fb *fb, dma_addr_t dst, dma_addr_t src,
-+		       int size)
-+{
-+	int burst_size = (fb->dma_chan == 0) ? 8 : 2;
-+	struct bcm2708_dma_cb *cb = fb->cb_base;
-+
-+	cb->info = BCM2708_DMA_BURST(burst_size) | BCM2708_DMA_S_WIDTH |
-+		   BCM2708_DMA_S_INC | BCM2708_DMA_D_WIDTH |
-+		   BCM2708_DMA_D_INC;
-+	cb->dst = dst;
-+	cb->src = src;
-+	cb->length = size;
-+	cb->stride = 0;
-+	cb->pad[0] = 0;
-+	cb->pad[1] = 0;
-+	cb->next = 0;
-+
-+	if (size < dma_busy_wait_threshold) {
-+		bcm_dma_start(fb->dma_chan_base, fb->cb_handle);
-+		bcm_dma_wait_idle(fb->dma_chan_base);
-+	} else {
-+		void __iomem *dma_chan = fb->dma_chan_base;
-+
-+		cb->info |= BCM2708_DMA_INT_EN;
-+		bcm_dma_start(fb->dma_chan_base, fb->cb_handle);
-+		while (bcm_dma_is_busy(dma_chan)) {
-+			wait_event_interruptible(
-+				fb->dma_waitq,
-+				!bcm_dma_is_busy(dma_chan));
-+		}
-+		fb->stats.dma_irqs++;
-+	}
-+	fb->stats.dma_copies++;
-+}
-+
-+/* address with no aliases */
-+#define INTALIAS_NORMAL(x) ((x)&~0xc0000000)
-+/* cache coherent but non-allocating in L1 and L2 */
-+#define INTALIAS_L1L2_NONALLOCATING(x) (((x)&~0xc0000000)|0x80000000)
-+
-+static long vc_mem_copy(struct bcm2708_fb *fb, unsigned long arg)
-+{
-+	struct fb_dmacopy ioparam;
-+	size_t size = PAGE_SIZE;
-+	u32 *buf = NULL;
-+	dma_addr_t bus_addr;
-+	long rc = 0;
-+	size_t offset;
-+
-+	/* restrict this to root user */
-+	if (!uid_eq(current_euid(), GLOBAL_ROOT_UID)) {
-+		rc = -EFAULT;
-+		goto out;
-+	}
-+
-+	/* Get the parameter data.
-+	 */
-+	if (copy_from_user
-+	    (&ioparam, (void *)arg, sizeof(ioparam)) != 0) {
-+		pr_err("[%s]: failed to copy-from-user\n",
-+				__func__);
-+		rc = -EFAULT;
-+		goto out;
-+	}
-+
-+	if (fb->gpu.base == 0 || fb->gpu.length == 0) {
-+		pr_err("[%s]: Unable to determine gpu memory (%x,%x)\n",
-+			__func__, fb->gpu.base, fb->gpu.length);
-+		return -EFAULT;
-+	}
-+
-+	if (INTALIAS_NORMAL(ioparam.src) < fb->gpu.base ||
-+		INTALIAS_NORMAL(ioparam.src) >= fb->gpu.base + fb->gpu.length) {
-+		pr_err("[%s]: Invalid memory access %x (%x-%x)", __func__,
-+			INTALIAS_NORMAL(ioparam.src), fb->gpu.base,
-+			fb->gpu.base + fb->gpu.length);
-+		return -EFAULT;
-+	}
-+
-+	buf = dma_alloc_coherent(fb->fb.device, PAGE_ALIGN(size), &bus_addr,
-+				 GFP_ATOMIC);
-+	if (!buf) {
-+		pr_err("[%s]: failed to dma_alloc_coherent(%d)\n",
-+				__func__, size);
-+		rc = -ENOMEM;
-+		goto out;
-+	}
-+
-+	for (offset = 0; offset < ioparam.length; offset += size) {
-+		size_t remaining = ioparam.length - offset;
-+		size_t s = min(size, remaining);
-+		unsigned char *p = (unsigned char *)ioparam.src + offset;
-+		unsigned char *q = (unsigned char *)ioparam.dst + offset;
-+
-+		dma_memcpy(fb, bus_addr,
-+			   INTALIAS_L1L2_NONALLOCATING((dma_addr_t)p), size);
-+		if (copy_to_user(q, buf, s) != 0) {
-+			pr_err("[%s]: failed to copy-to-user\n",
-+					__func__);
-+			rc = -EFAULT;
-+			goto out;
-+		}
-+	}
-+out:
-+	if (buf)
-+		dma_free_coherent(fb->fb.device, PAGE_ALIGN(size), buf,
-+				  bus_addr);
-+	return rc;
-+}
-+
-+static int bcm2708_ioctl(struct fb_info *info, unsigned int cmd,
-+			 unsigned long arg)
- {
- 	struct bcm2708_fb *fb = to_bcm2708(info);
- 	u32 dummy = 0;
-@@ -451,6 +565,9 @@ static int bcm2708_ioctl(struct fb_info
- 					    RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC,
- 					    &dummy, sizeof(dummy));
- 		break;
-+	case FBIODMACOPY:
-+		ret = vc_mem_copy(fb, arg);
-+		break;
- 	default:
- 		dev_dbg(info->device, "Unknown ioctl 0x%x\n", cmd);
- 		return -ENOTTY;
---- a/drivers/video/fbdev/core/fbmem.c
-+++ b/drivers/video/fbdev/core/fbmem.c
-@@ -1081,6 +1081,31 @@ fb_blank(struct fb_info *info, int blank
- }
- EXPORT_SYMBOL(fb_blank);
- 
-+static int fb_copyarea_user(struct fb_info *info,
-+			    struct fb_copyarea *copy)
-+{
-+	int ret = 0;
-+	if (!lock_fb_info(info))
-+		return -ENODEV;
-+	if (copy->dx >= info->var.xres ||
-+	    copy->sx >= info->var.xres ||
-+	    copy->width > info->var.xres ||
-+	    copy->dy >= info->var.yres ||
-+	    copy->sy >= info->var.yres ||
-+	    copy->height > info->var.yres ||
-+	    copy->dx + copy->width > info->var.xres ||
-+	    copy->sx + copy->width > info->var.xres ||
-+	    copy->dy + copy->height > info->var.yres ||
-+	    copy->sy + copy->height > info->var.yres) {
-+		ret = -EINVAL;
-+		goto out;
-+	}
-+	info->fbops->fb_copyarea(info, copy);
-+out:
-+	unlock_fb_info(info);
-+	return ret;
-+}
-+
- static long do_fb_ioctl(struct fb_info *info, unsigned int cmd,
- 			unsigned long arg)
- {
-@@ -1091,6 +1116,7 @@ static long do_fb_ioctl(struct fb_info *
- 	struct fb_cmap cmap_from;
- 	struct fb_cmap_user cmap;
- 	struct fb_event event;
-+	struct fb_copyarea copy;
- 	void __user *argp = (void __user *)arg;
- 	long ret = 0;
- 
-@@ -1208,6 +1234,15 @@ static long do_fb_ioctl(struct fb_info *
- 		unlock_fb_info(info);
- 		console_unlock();
- 		break;
-+	case FBIOCOPYAREA:
-+		if (info->flags & FBINFO_HWACCEL_COPYAREA) {
-+			/* only provide this ioctl if it is accelerated */
-+			if (copy_from_user(&copy, argp, sizeof(copy)))
-+				return -EFAULT;
-+			ret = fb_copyarea_user(info, &copy);
-+			break;
-+		}
-+		/* fall through */
- 	default:
- 		if (!lock_fb_info(info))
- 			return -ENODEV;
-@@ -1353,6 +1388,7 @@ static long fb_compat_ioctl(struct file
- 	case FBIOPAN_DISPLAY:
- 	case FBIOGET_CON2FBMAP:
- 	case FBIOPUT_CON2FBMAP:
-+	case FBIOCOPYAREA:
- 		arg = (unsigned long) compat_ptr(arg);
- 		/* fall through */
- 	case FBIOBLANK:
---- a/include/uapi/linux/fb.h
-+++ b/include/uapi/linux/fb.h
-@@ -35,6 +35,12 @@
- #define FBIOPUT_MODEINFO        0x4617
- #define FBIOGET_DISPINFO        0x4618
- #define FBIO_WAITFORVSYNC	_IOW('F', 0x20, __u32)
-+/*
-+ * HACK: use 'z' in order not to clash with any other ioctl numbers which might
-+ * be concurrently added to the mainline kernel
-+ */
-+#define FBIOCOPYAREA		_IOW('z', 0x21, struct fb_copyarea)
-+#define FBIODMACOPY 		_IOW('z', 0x22, struct fb_dmacopy)
- 
- #define FB_TYPE_PACKED_PIXELS		0	/* Packed Pixels	*/
- #define FB_TYPE_PLANES			1	/* Non interleaved planes */
-@@ -347,6 +353,12 @@ struct fb_copyarea {
- 	__u32 sy;
- };
- 
-+struct fb_dmacopy {
-+	void *dst;
-+	__u32 src;
-+	__u32 length;
-+};
-+
- struct fb_fillrect {
- 	__u32 dx;	/* screen-relative */
- 	__u32 dy;

target/linux/bcm27xx/patches-4.19/950-0059-Added-Device-IDs-for-August-DVB-T-205.patch

@@ -1,22 +0,0 @@
-From 298368d476283829d222cb974491ac313605ed69 Mon Sep 17 00:00:00 2001
-From: popcornmix <popcornmix@gmail.com>
-Date: Wed, 3 Jul 2013 00:54:08 +0100
-Subject: [PATCH] Added Device IDs for August DVB-T 205
-
----
- drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
-+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
-@@ -1917,6 +1917,10 @@ static const struct usb_device_id rtl28x
- 		&rtl28xxu_props, "Compro VideoMate U650F", NULL) },
- 	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd394,
- 		&rtl28xxu_props, "MaxMedia HU394-T", NULL) },
-+	{ DVB_USB_DEVICE(USB_VID_GTEK, 0xb803 /*USB_PID_AUGUST_DVBT205*/,
-+		&rtl28xxu_props, "August DVB-T 205", NULL) },
-+	{ DVB_USB_DEVICE(USB_VID_GTEK, 0xa803 /*USB_PID_AUGUST_DVBT205*/,
-+		&rtl28xxu_props, "August DVB-T 205", NULL) },
- 	{ DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6a03,
- 		&rtl28xxu_props, "Leadtek WinFast DTV Dongle mini", NULL) },
- 	{ DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_CPYTO_REDI_PC50A,

target/linux/bcm27xx/patches-4.19/950-0060-rpi-ft5406-Add-touchscreen-driver-for-pi-LCD-display.patch

@@ -1,340 +0,0 @@
-From 8137201823bd2ed1b3951220f29fdc9555c3c6de Mon Sep 17 00:00:00 2001
-From: Gordon Hollingworth <gordon@raspberrypi.org>
-Date: Tue, 12 May 2015 14:47:56 +0100
-Subject: [PATCH] rpi-ft5406: Add touchscreen driver for pi LCD display
-
-Fix driver detection failure Check that the buffer response is non-zero meaning the touchscreen was detected
-
-rpi-ft5406: Use firmware API
-
-RPI-FT5406: Enable aarch64 support through explicit iomem interface
-
-Signed-off-by: Gerhard de Clercq <gerharddeclercq@outlook.com>
----
- drivers/input/touchscreen/Kconfig      |   7 +
- drivers/input/touchscreen/Makefile     |   1 +
- drivers/input/touchscreen/rpi-ft5406.c | 292 +++++++++++++++++++++++++
- 3 files changed, 300 insertions(+)
- create mode 100644 drivers/input/touchscreen/rpi-ft5406.c
-
---- a/drivers/input/touchscreen/Kconfig
-+++ b/drivers/input/touchscreen/Kconfig
-@@ -696,6 +696,13 @@ config TOUCHSCREEN_EDT_FT5X06
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called edt-ft5x06.
- 
-+config TOUCHSCREEN_RPI_FT5406
-+	tristate "Raspberry Pi FT5406 driver"
-+	depends on RASPBERRYPI_FIRMWARE
-+	help
-+	  Say Y here to enable the Raspberry Pi memory based FT5406 device
-+
-+
- config TOUCHSCREEN_MIGOR
- 	tristate "Renesas MIGO-R touchscreen"
- 	depends on (SH_MIGOR || COMPILE_TEST) && I2C
---- a/drivers/input/touchscreen/Makefile
-+++ b/drivers/input/touchscreen/Makefile
-@@ -33,6 +33,7 @@ obj-$(CONFIG_TOUCHSCREEN_DA9034)	+= da90
- obj-$(CONFIG_TOUCHSCREEN_DA9052)	+= da9052_tsi.o
- obj-$(CONFIG_TOUCHSCREEN_DYNAPRO)	+= dynapro.o
- obj-$(CONFIG_TOUCHSCREEN_EDT_FT5X06)	+= edt-ft5x06.o
-+obj-$(CONFIG_TOUCHSCREEN_RPI_FT5406)	+= rpi-ft5406.o
- obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE)	+= hampshire.o
- obj-$(CONFIG_TOUCHSCREEN_GUNZE)		+= gunze.o
- obj-$(CONFIG_TOUCHSCREEN_EETI)		+= eeti_ts.o
---- /dev/null
-+++ b/drivers/input/touchscreen/rpi-ft5406.c
-@@ -0,0 +1,292 @@
-+/*
-+ * Driver for memory based ft5406 touchscreen
-+ *
-+ * Copyright (C) 2015 Raspberry Pi
-+ *
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+
-+#include <linux/module.h>
-+#include <linux/interrupt.h>
-+#include <linux/input.h>
-+#include <linux/irq.h>
-+#include <linux/delay.h>
-+#include <linux/slab.h>
-+#include <linux/bitops.h>
-+#include <linux/input/mt.h>
-+#include <linux/kthread.h>
-+#include <linux/platform_device.h>
-+#include <linux/stddef.h>
-+#include <asm/io.h>
-+#include <linux/dma-mapping.h>
-+#include <soc/bcm2835/raspberrypi-firmware.h>
-+
-+#define MAXIMUM_SUPPORTED_POINTS 10
-+struct ft5406_regs {
-+	uint8_t device_mode;
-+	uint8_t gesture_id;
-+	uint8_t num_points;
-+	struct ft5406_touch {
-+		uint8_t xh;
-+		uint8_t xl;
-+		uint8_t yh;
-+		uint8_t yl;
-+		uint8_t res1;
-+		uint8_t res2;
-+	} point[MAXIMUM_SUPPORTED_POINTS];
-+};
-+
-+#define SCREEN_WIDTH  800
-+#define SCREEN_HEIGHT 480
-+
-+struct ft5406 {
-+	struct platform_device * pdev;
-+	struct input_dev       * input_dev;
-+	void __iomem           * ts_base;
-+	dma_addr_t		 bus_addr;
-+	struct task_struct     * thread;
-+};
-+
-+/* Thread to poll for touchscreen events
-+ * 
-+ * This thread polls the memory based register copy of the ft5406 registers
-+ * using the number of points register to know whether the copy has been
-+ * updated (we write 99 to the memory copy, the GPU will write between 
-+ * 0 - 10 points)
-+ */
-+static int ft5406_thread(void *arg)
-+{
-+	struct ft5406 *ts = (struct ft5406 *) arg;
-+	struct ft5406_regs regs;
-+	int known_ids = 0;
-+	
-+	while(!kthread_should_stop())
-+	{
-+		// 60fps polling
-+		msleep_interruptible(17);
-+		memcpy_fromio(&regs, ts->ts_base, sizeof(struct ft5406_regs));
-+		iowrite8(99, ts->ts_base + offsetof(struct ft5406_regs, num_points));
-+		// Do not output if theres no new information (num_points is 99)
-+		// or we have no touch points and don't need to release any
-+		if(!(regs.num_points == 99 || (regs.num_points == 0 && known_ids == 0)))
-+		{
-+			int i;
-+			int modified_ids = 0, released_ids;
-+			for(i = 0; i < regs.num_points; i++)
-+			{
-+				int x = (((int) regs.point[i].xh & 0xf) << 8) + regs.point[i].xl;
-+				int y = (((int) regs.point[i].yh & 0xf) << 8) + regs.point[i].yl;
-+				int touchid = (regs.point[i].yh >> 4) & 0xf;
-+				
-+				modified_ids |= 1 << touchid;
-+
-+				if(!((1 << touchid) & known_ids))
-+					dev_dbg(&ts->pdev->dev, "x = %d, y = %d, touchid = %d\n", x, y, touchid);
-+				
-+				input_mt_slot(ts->input_dev, touchid);
-+				input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, 1);
-+
-+				input_report_abs(ts->input_dev, ABS_MT_POSITION_X, x);
-+				input_report_abs(ts->input_dev, ABS_MT_POSITION_Y, y);
-+
-+			}
-+
-+			released_ids = known_ids & ~modified_ids;
-+			for(i = 0; released_ids && i < MAXIMUM_SUPPORTED_POINTS; i++)
-+			{
-+				if(released_ids & (1<<i))
-+				{
-+					dev_dbg(&ts->pdev->dev, "Released %d, known = %x modified = %x\n", i, known_ids, modified_ids);
-+					input_mt_slot(ts->input_dev, i);
-+					input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, 0);
-+					modified_ids &= ~(1 << i);
-+				}
-+			}
-+			known_ids = modified_ids;
-+			
-+			input_mt_report_pointer_emulation(ts->input_dev, true);
-+			input_sync(ts->input_dev);
-+		}
-+			
-+	}
-+	
-+	return 0;
-+}
-+
-+static int ft5406_probe(struct platform_device *pdev)
-+{
-+	int err = 0;
-+	struct device *dev = &pdev->dev;
-+	struct device_node *np = dev->of_node;
-+	struct ft5406 * ts;
-+	struct device_node *fw_node;
-+	struct rpi_firmware *fw;
-+	u32 touchbuf;
-+	
-+	dev_info(dev, "Probing device\n");
-+	
-+	fw_node = of_parse_phandle(np, "firmware", 0);
-+	if (!fw_node) {
-+		dev_err(dev, "Missing firmware node\n");
-+		return -ENOENT;
-+	}
-+
-+	fw = rpi_firmware_get(fw_node);
-+	if (!fw)
-+		return -EPROBE_DEFER;
-+
-+	ts = devm_kzalloc(dev, sizeof(struct ft5406), GFP_KERNEL);
-+	if (!ts) {
-+		dev_err(dev, "Failed to allocate memory\n");
-+		return -ENOMEM;
-+	}
-+
-+	ts->input_dev = input_allocate_device();
-+	if (!ts->input_dev) {
-+		dev_err(dev, "Failed to allocate input device\n");
-+		return -ENOMEM;
-+	}
-+
-+	ts->ts_base = dma_zalloc_coherent(dev, PAGE_SIZE, &ts->bus_addr, GFP_KERNEL);
-+	if (!ts->ts_base) {
-+		pr_err("[%s]: failed to dma_alloc_coherent(%ld)\n",
-+				__func__, PAGE_SIZE);
-+		err = -ENOMEM;
-+		goto out;
-+	}
-+
-+	touchbuf = (u32)ts->bus_addr;
-+	err = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF,
-+				    &touchbuf, sizeof(touchbuf));
-+
-+	if (err || touchbuf != 0) {
-+		dev_warn(dev, "Failed to set touchbuf, trying to get err:%x\n", err);
-+		dma_free_coherent(dev, PAGE_SIZE, ts->ts_base, ts->bus_addr);
-+		ts->ts_base = 0;
-+		ts->bus_addr = 0;
-+	}
-+
-+	if (!ts->ts_base) {
-+		dev_warn(dev, "set failed, trying get (err:%d touchbuf:%x virt:%p bus:%x)\n", err, touchbuf, ts->ts_base, ts->bus_addr);
-+
-+		err = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_GET_TOUCHBUF,
-+				    &touchbuf, sizeof(touchbuf));
-+		if (err) {
-+			dev_err(dev, "Failed to get touch buffer\n");
-+			goto out;
-+		}
-+
-+		if (!touchbuf) {
-+			dev_err(dev, "Touchscreen not detected\n");
-+			err = -ENODEV;
-+			goto out;
-+		}
-+
-+		dev_dbg(dev, "Got TS buffer 0x%x\n", touchbuf);
-+
-+		// mmap the physical memory
-+		touchbuf &= ~0xc0000000;
-+		ts->ts_base = ioremap(touchbuf, sizeof(struct ft5406_regs));
-+		if (ts->ts_base == NULL)
-+		{
-+			dev_err(dev, "Failed to map physical address\n");
-+			err = -ENOMEM;
-+			goto out;
-+		}
-+	}
-+	platform_set_drvdata(pdev, ts);
-+	ts->pdev = pdev;
-+	
-+	ts->input_dev->name = "FT5406 memory based driver";
-+	
-+	__set_bit(EV_KEY, ts->input_dev->evbit);
-+	__set_bit(EV_SYN, ts->input_dev->evbit);
-+	__set_bit(EV_ABS, ts->input_dev->evbit);
-+
-+	input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X, 0,
-+			     SCREEN_WIDTH, 0, 0);
-+	input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y, 0,
-+			     SCREEN_HEIGHT, 0, 0);
-+
-+	input_mt_init_slots(ts->input_dev, MAXIMUM_SUPPORTED_POINTS, INPUT_MT_DIRECT);
-+
-+	input_set_drvdata(ts->input_dev, ts);
-+	
-+	err = input_register_device(ts->input_dev);
-+	if (err) {
-+		dev_err(dev, "could not register input device, %d\n",
-+			err);
-+		goto out;
-+	}
-+
-+	// create thread to poll the touch events
-+	ts->thread = kthread_run(ft5406_thread, ts, "ft5406");
-+	if(ts->thread == NULL)
-+	{
-+		dev_err(dev, "Failed to create kernel thread");
-+		err = -ENOMEM;
-+		goto out;
-+	}
-+
-+	return 0;
-+
-+out:
-+	if (ts->bus_addr) {
-+		dma_free_coherent(dev, PAGE_SIZE, ts->ts_base, ts->bus_addr);
-+		ts->bus_addr = 0;
-+		ts->ts_base = NULL;
-+	} else if (ts->ts_base) {
-+		iounmap(ts->ts_base);
-+		ts->ts_base = NULL;
-+	}
-+	if (ts->input_dev) {
-+		input_unregister_device(ts->input_dev);
-+		ts->input_dev = NULL;
-+	}
-+	return err;
-+}
-+
-+static int ft5406_remove(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct ft5406 *ts = (struct ft5406 *) platform_get_drvdata(pdev);
-+	
-+	dev_info(dev, "Removing rpi-ft5406\n");
-+	
-+	kthread_stop(ts->thread);
-+
-+	if (ts->bus_addr)
-+		dma_free_coherent(dev, PAGE_SIZE, ts->ts_base, ts->bus_addr);
-+	else if (ts->ts_base)
-+		iounmap(ts->ts_base);
-+	if (ts->input_dev)
-+		input_unregister_device(ts->input_dev);
-+	
-+	return 0;
-+}
-+
-+static const struct of_device_id ft5406_match[] = {
-+	{ .compatible = "rpi,rpi-ft5406", },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, ft5406_match);
-+
-+static struct platform_driver ft5406_driver = {
-+	.driver = {
-+		.name   = "rpi-ft5406",
-+		.owner  = THIS_MODULE,
-+		.of_match_table = ft5406_match,
-+	},
-+	.probe          = ft5406_probe,
-+	.remove         = ft5406_remove,
-+};
-+
-+module_platform_driver(ft5406_driver);
-+
-+MODULE_AUTHOR("Gordon Hollingworth");
-+MODULE_DESCRIPTION("Touchscreen driver for memory based FT5406");
-+MODULE_LICENSE("GPL");

target/linux/bcm27xx/patches-4.19/950-0062-gpio-poweroff-Allow-it-to-work-on-Raspberry-Pi.patch

@@ -1,35 +0,0 @@
-From 84cd61bdf5fe5ecf70ad88e60e07879cbde2d4a6 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Thu, 25 Jun 2015 12:16:11 +0100
-Subject: [PATCH] gpio-poweroff: Allow it to work on Raspberry Pi
-
-The Raspberry Pi firmware manages the power-down and reboot
-process. To do this it installs a pm_power_off handler, causing
-the gpio-poweroff module to abort the probe function.
-
-This patch introduces a "force" DT property that overrides that
-behaviour, and also adds a DT overlay to enable and control it.
-
-Note that running in an active-low configuration (DT parameter
-"active_low") requires a custom dt-blob.bin and probably won't
-allow a reboot without switching off, so an external inversion
-of the trigger signal may be preferable.
----
- drivers/power/reset/gpio-poweroff.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/power/reset/gpio-poweroff.c
-+++ b/drivers/power/reset/gpio-poweroff.c
-@@ -51,9 +51,11 @@ static int gpio_poweroff_probe(struct pl
- {
- 	bool input = false;
- 	enum gpiod_flags flags;
-+	bool force = false;
- 
- 	/* If a pm_power_off function has already been added, leave it alone */
--	if (pm_power_off != NULL) {
-+	force = of_property_read_bool(pdev->dev.of_node, "force");
-+	if (!force && (pm_power_off != NULL)) {
- 		dev_err(&pdev->dev,
- 			"%s: pm_power_off function already registered",
- 		       __func__);

target/linux/bcm27xx/patches-4.19/950-0063-mfd-Add-Raspberry-Pi-Sense-HAT-core-driver.patch

@@ -1,841 +0,0 @@
-From 0d63b8a00c925eb02093e9ed4866c4a0d9209a00 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <pelwell@users.noreply.github.com>
-Date: Tue, 14 Jul 2015 14:32:47 +0100
-Subject: [PATCH] mfd: Add Raspberry Pi Sense HAT core driver
-
----
- drivers/input/joystick/Kconfig           |   8 +
- drivers/input/joystick/Makefile          |   1 +
- drivers/input/joystick/rpisense-js.c     | 153 ++++++++++++
- drivers/mfd/Kconfig                      |   8 +
- drivers/mfd/Makefile                     |   2 +-
- drivers/mfd/rpisense-core.c              | 157 ++++++++++++
- drivers/video/fbdev/Kconfig              |  13 +
- drivers/video/fbdev/Makefile             |   1 +
- drivers/video/fbdev/rpisense-fb.c        | 293 +++++++++++++++++++++++
- include/linux/mfd/rpisense/core.h        |  47 ++++
- include/linux/mfd/rpisense/framebuffer.h |  32 +++
- include/linux/mfd/rpisense/joystick.h    |  35 +++
- 12 files changed, 749 insertions(+), 1 deletion(-)
- create mode 100644 drivers/input/joystick/rpisense-js.c
- create mode 100644 drivers/mfd/rpisense-core.c
- create mode 100644 drivers/video/fbdev/rpisense-fb.c
- create mode 100644 include/linux/mfd/rpisense/core.h
- create mode 100644 include/linux/mfd/rpisense/framebuffer.h
- create mode 100644 include/linux/mfd/rpisense/joystick.h
-
---- a/drivers/input/joystick/Kconfig
-+++ b/drivers/input/joystick/Kconfig
-@@ -361,4 +361,12 @@ config JOYSTICK_PXRC
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called pxrc.
- 
-+config JOYSTICK_RPISENSE
-+	tristate "Raspberry Pi Sense HAT joystick"
-+	depends on GPIOLIB && INPUT
-+	select MFD_RPISENSE_CORE
-+
-+	help
-+	  This is the joystick driver for the Raspberry Pi Sense HAT
-+
- endif
---- a/drivers/input/joystick/Makefile
-+++ b/drivers/input/joystick/Makefile
-@@ -35,4 +35,5 @@ obj-$(CONFIG_JOYSTICK_WARRIOR)		+= warri
- obj-$(CONFIG_JOYSTICK_XPAD)		+= xpad.o
- obj-$(CONFIG_JOYSTICK_ZHENHUA)		+= zhenhua.o
- obj-$(CONFIG_JOYSTICK_WALKERA0701)	+= walkera0701.o
-+obj-$(CONFIG_JOYSTICK_RPISENSE)		+= rpisense-js.o
- 
---- /dev/null
-+++ b/drivers/input/joystick/rpisense-js.c
-@@ -0,0 +1,153 @@
-+/*
-+ * Raspberry Pi Sense HAT joystick driver
-+ * http://raspberrypi.org
-+ *
-+ * Copyright (C) 2015 Raspberry Pi
-+ *
-+ * Author: Serge Schneider
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+
-+#include <linux/mfd/rpisense/joystick.h>
-+#include <linux/mfd/rpisense/core.h>
-+
-+static struct rpisense *rpisense;
-+static unsigned char keymap[5] = {KEY_DOWN, KEY_RIGHT, KEY_UP, KEY_ENTER, KEY_LEFT,};
-+
-+static void keys_work_fn(struct work_struct *work)
-+{
-+	int i;
-+	static s32 prev_keys;
-+	struct rpisense_js *rpisense_js = &rpisense->joystick;
-+	s32 keys = rpisense_reg_read(rpisense, RPISENSE_KEYS);
-+	s32 changes = keys ^ prev_keys;
-+
-+	prev_keys = keys;
-+	for (i = 0; i < 5; i++) {
-+		if (changes & 1) {
-+			input_report_key(rpisense_js->keys_dev,
-+					 keymap[i], keys & 1);
-+		}
-+		changes >>= 1;
-+		keys >>= 1;
-+	}
-+	input_sync(rpisense_js->keys_dev);
-+}
-+
-+static irqreturn_t keys_irq_handler(int irq, void *pdev)
-+{
-+	struct rpisense_js *rpisense_js = &rpisense->joystick;
-+
-+	schedule_work(&rpisense_js->keys_work_s);
-+	return IRQ_HANDLED;
-+}
-+
-+static int rpisense_js_probe(struct platform_device *pdev)
-+{
-+	int ret;
-+	int i;
-+	struct rpisense_js *rpisense_js;
-+
-+	rpisense = rpisense_get_dev();
-+	rpisense_js = &rpisense->joystick;
-+
-+	INIT_WORK(&rpisense_js->keys_work_s, keys_work_fn);
-+
-+	rpisense_js->keys_dev = input_allocate_device();
-+	if (!rpisense_js->keys_dev) {
-+		dev_err(&pdev->dev, "Could not allocate input device.\n");
-+		return -ENOMEM;
-+	}
-+
-+	rpisense_js->keys_dev->evbit[0] = BIT_MASK(EV_KEY);
-+	for (i = 0; i < ARRAY_SIZE(keymap); i++) {
-+		set_bit(keymap[i],
-+			rpisense_js->keys_dev->keybit);
-+	}
-+
-+	rpisense_js->keys_dev->name = "Raspberry Pi Sense HAT Joystick";
-+	rpisense_js->keys_dev->phys = "rpi-sense-joy/input0";
-+	rpisense_js->keys_dev->id.bustype = BUS_I2C;
-+	rpisense_js->keys_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
-+	rpisense_js->keys_dev->keycode = keymap;
-+	rpisense_js->keys_dev->keycodesize = sizeof(unsigned char);
-+	rpisense_js->keys_dev->keycodemax = ARRAY_SIZE(keymap);
-+
-+	ret = input_register_device(rpisense_js->keys_dev);
-+	if (ret) {
-+		dev_err(&pdev->dev, "Could not register input device.\n");
-+		goto err_keys_alloc;
-+	}
-+
-+	ret = gpiod_direction_input(rpisense_js->keys_desc);
-+	if (ret) {
-+		dev_err(&pdev->dev, "Could not set keys-int direction.\n");
-+		goto err_keys_reg;
-+	}
-+
-+	rpisense_js->keys_irq = gpiod_to_irq(rpisense_js->keys_desc);
-+	if (rpisense_js->keys_irq < 0) {
-+		dev_err(&pdev->dev, "Could not determine keys-int IRQ.\n");
-+		ret = rpisense_js->keys_irq;
-+		goto err_keys_reg;
-+	}
-+
-+	ret = devm_request_irq(&pdev->dev, rpisense_js->keys_irq,
-+			       keys_irq_handler, IRQF_TRIGGER_RISING,
-+			       "keys", &pdev->dev);
-+	if (ret) {
-+		dev_err(&pdev->dev, "IRQ request failed.\n");
-+		goto err_keys_reg;
-+	}
-+	return 0;
-+err_keys_reg:
-+	input_unregister_device(rpisense_js->keys_dev);
-+err_keys_alloc:
-+	input_free_device(rpisense_js->keys_dev);
-+	return ret;
-+}
-+
-+static int rpisense_js_remove(struct platform_device *pdev)
-+{
-+	struct rpisense_js *rpisense_js = &rpisense->joystick;
-+
-+	input_unregister_device(rpisense_js->keys_dev);
-+	input_free_device(rpisense_js->keys_dev);
-+	return 0;
-+}
-+
-+#ifdef CONFIG_OF
-+static const struct of_device_id rpisense_js_id[] = {
-+	{ .compatible = "rpi,rpi-sense-js" },
-+	{ },
-+};
-+MODULE_DEVICE_TABLE(of, rpisense_js_id);
-+#endif
-+
-+static struct platform_device_id rpisense_js_device_id[] = {
-+	{ .name = "rpi-sense-js" },
-+	{ },
-+};
-+MODULE_DEVICE_TABLE(platform, rpisense_js_device_id);
-+
-+static struct platform_driver rpisense_js_driver = {
-+	.probe = rpisense_js_probe,
-+	.remove = rpisense_js_remove,
-+	.driver = {
-+		.name = "rpi-sense-js",
-+		.owner = THIS_MODULE,
-+	},
-+};
-+
-+module_platform_driver(rpisense_js_driver);
-+
-+MODULE_DESCRIPTION("Raspberry Pi Sense HAT joystick driver");
-+MODULE_AUTHOR("Serge Schneider <serge@raspberrypi.org>");
-+MODULE_LICENSE("GPL");
---- a/drivers/mfd/Kconfig
-+++ b/drivers/mfd/Kconfig
-@@ -10,6 +10,14 @@ config MFD_CORE
- 	select IRQ_DOMAIN
- 	default n
- 
-+config MFD_RPISENSE_CORE
-+	tristate "Raspberry Pi Sense HAT core functions"
-+	depends on I2C
-+	select MFD_CORE
-+	help
-+	  This is the core driver for the Raspberry Pi Sense HAT. This provides
-+	  the necessary functions to communicate with the hardware.
-+
- config MFD_CS5535
- 	tristate "AMD CS5535 and CS5536 southbridge core functions"
- 	select MFD_CORE
---- a/drivers/mfd/Makefile
-+++ b/drivers/mfd/Makefile
-@@ -240,4 +240,4 @@ obj-$(CONFIG_MFD_MXS_LRADC)     += mxs-l
- obj-$(CONFIG_MFD_SC27XX_PMIC)	+= sprd-sc27xx-spi.o
- obj-$(CONFIG_RAVE_SP_CORE)	+= rave-sp.o
- obj-$(CONFIG_MFD_ROHM_BD718XX)	+= rohm-bd718x7.o
--
-+obj-$(CONFIG_MFD_RPISENSE_CORE)	+= rpisense-core.o
---- /dev/null
-+++ b/drivers/mfd/rpisense-core.c
-@@ -0,0 +1,157 @@
-+/*
-+ * Raspberry Pi Sense HAT core driver
-+ * http://raspberrypi.org
-+ *
-+ * Copyright (C) 2015 Raspberry Pi
-+ *
-+ * Author: Serge Schneider
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  This driver is based on wm8350 implementation.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+#include <linux/i2c.h>
-+#include <linux/platform_device.h>
-+#include <linux/mfd/rpisense/core.h>
-+#include <linux/slab.h>
-+
-+static struct rpisense *rpisense;
-+
-+static void rpisense_client_dev_register(struct rpisense *rpisense,
-+					 const char *name,
-+					 struct platform_device **pdev)
-+{
-+	int ret;
-+
-+	*pdev = platform_device_alloc(name, -1);
-+	if (*pdev == NULL) {
-+		dev_err(rpisense->dev, "Failed to allocate %s\n", name);
-+		return;
-+	}
-+
-+	(*pdev)->dev.parent = rpisense->dev;
-+	platform_set_drvdata(*pdev, rpisense);
-+	ret = platform_device_add(*pdev);
-+	if (ret != 0) {
-+		dev_err(rpisense->dev, "Failed to register %s: %d\n",
-+			name, ret);
-+		platform_device_put(*pdev);
-+		*pdev = NULL;
-+	}
-+}
-+
-+static int rpisense_probe(struct i2c_client *i2c,
-+			       const struct i2c_device_id *id)
-+{
-+	int ret;
-+	struct rpisense_js *rpisense_js;
-+
-+	rpisense = devm_kzalloc(&i2c->dev, sizeof(struct rpisense), GFP_KERNEL);
-+	if (rpisense == NULL)
-+		return -ENOMEM;
-+
-+	i2c_set_clientdata(i2c, rpisense);
-+	rpisense->dev = &i2c->dev;
-+	rpisense->i2c_client = i2c;
-+
-+	ret = rpisense_reg_read(rpisense, RPISENSE_WAI);
-+	if (ret > 0) {
-+		if (ret != 's')
-+			return -EINVAL;
-+	} else {
-+		return ret;
-+	}
-+	ret = rpisense_reg_read(rpisense, RPISENSE_VER);
-+	if (ret < 0)
-+		return ret;
-+
-+	dev_info(rpisense->dev,
-+		 "Raspberry Pi Sense HAT firmware version %i\n", ret);
-+
-+	rpisense_js = &rpisense->joystick;
-+	rpisense_js->keys_desc = devm_gpiod_get(&i2c->dev,
-+						"keys-int", GPIOD_IN);
-+	if (IS_ERR(rpisense_js->keys_desc)) {
-+		dev_warn(&i2c->dev, "Failed to get keys-int descriptor.\n");
-+		rpisense_js->keys_desc = gpio_to_desc(23);
-+		if (rpisense_js->keys_desc == NULL) {
-+			dev_err(&i2c->dev, "GPIO23 fallback failed.\n");
-+			return PTR_ERR(rpisense_js->keys_desc);
-+		}
-+	}
-+	rpisense_client_dev_register(rpisense, "rpi-sense-js",
-+				     &(rpisense->joystick.pdev));
-+	rpisense_client_dev_register(rpisense, "rpi-sense-fb",
-+				     &(rpisense->framebuffer.pdev));
-+
-+	return 0;
-+}
-+
-+static int rpisense_remove(struct i2c_client *i2c)
-+{
-+	struct rpisense *rpisense = i2c_get_clientdata(i2c);
-+
-+	platform_device_unregister(rpisense->joystick.pdev);
-+	return 0;
-+}
-+
-+struct rpisense *rpisense_get_dev(void)
-+{
-+	return rpisense;
-+}
-+EXPORT_SYMBOL_GPL(rpisense_get_dev);
-+
-+s32 rpisense_reg_read(struct rpisense *rpisense, int reg)
-+{
-+	int ret = i2c_smbus_read_byte_data(rpisense->i2c_client, reg);
-+
-+	if (ret < 0)
-+		dev_err(rpisense->dev, "Read from reg %d failed\n", reg);
-+	/* Due to the BCM270x I2C clock stretching bug, some values
-+	 * may have MSB set. Clear it to avoid incorrect values.
-+	 * */
-+	return ret & 0x7F;
-+}
-+EXPORT_SYMBOL_GPL(rpisense_reg_read);
-+
-+int rpisense_block_write(struct rpisense *rpisense, const char *buf, int count)
-+{
-+	int ret = i2c_master_send(rpisense->i2c_client, buf, count);
-+
-+	if (ret < 0)
-+		dev_err(rpisense->dev, "Block write failed\n");
-+	return ret;
-+}
-+EXPORT_SYMBOL_GPL(rpisense_block_write);
-+
-+static const struct i2c_device_id rpisense_i2c_id[] = {
-+	{ "rpi-sense", 0 },
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(i2c, rpisense_i2c_id);
-+
-+
-+static struct i2c_driver rpisense_driver = {
-+	.driver = {
-+		   .name = "rpi-sense",
-+		   .owner = THIS_MODULE,
-+	},
-+	.probe = rpisense_probe,
-+	.remove = rpisense_remove,
-+	.id_table = rpisense_i2c_id,
-+};
-+
-+module_i2c_driver(rpisense_driver);
-+
-+MODULE_DESCRIPTION("Raspberry Pi Sense HAT core driver");
-+MODULE_AUTHOR("Serge Schneider <serge@raspberrypi.org>");
-+MODULE_LICENSE("GPL");
-+
---- a/drivers/video/fbdev/Kconfig
-+++ b/drivers/video/fbdev/Kconfig
-@@ -2350,6 +2350,19 @@ config FB_SM712
- 	  called sm712fb. If you want to compile it as a module, say M
- 	  here and read <file:Documentation/kbuild/modules.txt>.
- 
-+config FB_RPISENSE
-+	tristate "Raspberry Pi Sense HAT framebuffer"
-+	depends on FB
-+	select MFD_RPISENSE_CORE
-+	select FB_SYS_FOPS
-+	select FB_SYS_FILLRECT
-+	select FB_SYS_COPYAREA
-+	select FB_SYS_IMAGEBLIT
-+	select FB_DEFERRED_IO
-+
-+	help
-+	  This is the framebuffer driver for the Raspberry Pi Sense HAT
-+
- source "drivers/video/fbdev/omap/Kconfig"
- source "drivers/video/fbdev/omap2/Kconfig"
- source "drivers/video/fbdev/mmp/Kconfig"
---- a/drivers/video/fbdev/Makefile
-+++ b/drivers/video/fbdev/Makefile
-@@ -138,6 +138,7 @@ obj-$(CONFIG_FB_DA8XX)		  += da8xx-fb.o
- obj-$(CONFIG_FB_MXS)		  += mxsfb.o
- obj-$(CONFIG_FB_SSD1307)	  += ssd1307fb.o
- obj-$(CONFIG_FB_SIMPLE)           += simplefb.o
-+obj-$(CONFIG_FB_RPISENSE)	  += rpisense-fb.o
- 
- # the test framebuffer is last
- obj-$(CONFIG_FB_VIRTUAL)          += vfb.o
---- /dev/null
-+++ b/drivers/video/fbdev/rpisense-fb.c
-@@ -0,0 +1,293 @@
-+/*
-+ * Raspberry Pi Sense HAT framebuffer driver
-+ * http://raspberrypi.org
-+ *
-+ * Copyright (C) 2015 Raspberry Pi
-+ *
-+ * Author: Serge Schneider
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/string.h>
-+#include <linux/mm.h>
-+#include <linux/slab.h>
-+#include <linux/uaccess.h>
-+#include <linux/delay.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+
-+#include <linux/mfd/rpisense/framebuffer.h>
-+#include <linux/mfd/rpisense/core.h>
-+
-+static bool lowlight;
-+module_param(lowlight, bool, 0);
-+MODULE_PARM_DESC(lowlight, "Reduce LED matrix brightness to one third");
-+
-+static struct rpisense *rpisense;
-+
-+struct rpisense_fb_param {
-+	char __iomem *vmem;
-+	u8 *vmem_work;
-+	u32 vmemsize;
-+	u8 *gamma;
-+};
-+
-+static u8 gamma_default[32] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01,
-+			       0x02, 0x02, 0x03, 0x03, 0x04, 0x05, 0x06, 0x07,
-+			       0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0E, 0x0F, 0x11,
-+			       0x12, 0x14, 0x15, 0x17, 0x19, 0x1B, 0x1D, 0x1F,};
-+
-+static u8 gamma_low[32] = {0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
-+			   0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x02, 0x02,
-+			   0x03, 0x03, 0x03, 0x04, 0x04, 0x05, 0x05, 0x06,
-+			   0x06, 0x07, 0x07, 0x08, 0x08, 0x09, 0x0A, 0x0A,};
-+
-+static u8 gamma_user[32];
-+
-+static struct rpisense_fb_param rpisense_fb_param = {
-+	.vmem = NULL,
-+	.vmemsize = 128,
-+	.gamma = gamma_default,
-+};
-+
-+static struct fb_deferred_io rpisense_fb_defio;
-+
-+static struct fb_fix_screeninfo rpisense_fb_fix = {
-+	.id =		"RPi-Sense FB",
-+	.type =		FB_TYPE_PACKED_PIXELS,
-+	.visual =	FB_VISUAL_TRUECOLOR,
-+	.xpanstep =	0,
-+	.ypanstep =	0,
-+	.ywrapstep =	0,
-+	.accel =	FB_ACCEL_NONE,
-+	.line_length =	16,
-+};
-+
-+static struct fb_var_screeninfo rpisense_fb_var = {
-+	.xres		= 8,
-+	.yres		= 8,
-+	.xres_virtual	= 8,
-+	.yres_virtual	= 8,
-+	.bits_per_pixel = 16,
-+	.red		= {11, 5, 0},
-+	.green		= {5, 6, 0},
-+	.blue		= {0, 5, 0},
-+};
-+
-+static ssize_t rpisense_fb_write(struct fb_info *info,
-+				 const char __user *buf, size_t count,
-+				 loff_t *ppos)
-+{
-+	ssize_t res = fb_sys_write(info, buf, count, ppos);
-+
-+	schedule_delayed_work(&info->deferred_work, rpisense_fb_defio.delay);
-+	return res;
-+}
-+
-+static void rpisense_fb_fillrect(struct fb_info *info,
-+				 const struct fb_fillrect *rect)
-+{
-+	sys_fillrect(info, rect);
-+	schedule_delayed_work(&info->deferred_work, rpisense_fb_defio.delay);
-+}
-+
-+static void rpisense_fb_copyarea(struct fb_info *info,
-+				 const struct fb_copyarea *area)
-+{
-+	sys_copyarea(info, area);
-+	schedule_delayed_work(&info->deferred_work, rpisense_fb_defio.delay);
-+}
-+
-+static void rpisense_fb_imageblit(struct fb_info *info,
-+				  const struct fb_image *image)
-+{
-+	sys_imageblit(info, image);
-+	schedule_delayed_work(&info->deferred_work, rpisense_fb_defio.delay);
-+}
-+
-+static void rpisense_fb_deferred_io(struct fb_info *info,
-+				struct list_head *pagelist)
-+{
-+	int i;
-+	int j;
-+	u8 *vmem_work = rpisense_fb_param.vmem_work;
-+	u16 *mem = (u16 *)rpisense_fb_param.vmem;
-+	u8 *gamma = rpisense_fb_param.gamma;
-+
-+	vmem_work[0] = 0;
-+	for (j = 0; j < 8; j++) {
-+		for (i = 0; i < 8; i++) {
-+			vmem_work[(j * 24) + i + 1] =
-+				gamma[(mem[(j * 8) + i] >> 11) & 0x1F];
-+			vmem_work[(j * 24) + (i + 8) + 1] =
-+				gamma[(mem[(j * 8) + i] >> 6) & 0x1F];
-+			vmem_work[(j * 24) + (i + 16) + 1] =
-+				gamma[(mem[(j * 8) + i]) & 0x1F];
-+		}
-+	}
-+	rpisense_block_write(rpisense, vmem_work, 193);
-+}
-+
-+static struct fb_deferred_io rpisense_fb_defio = {
-+	.delay		= HZ/100,
-+	.deferred_io	= rpisense_fb_deferred_io,
-+};
-+
-+static int rpisense_fb_ioctl(struct fb_info *info, unsigned int cmd,
-+			     unsigned long arg)
-+{
-+	switch (cmd) {
-+	case SENSEFB_FBIOGET_GAMMA:
-+		if (copy_to_user((void __user *) arg, rpisense_fb_param.gamma,
-+				 sizeof(u8[32])))
-+			return -EFAULT;
-+		return 0;
-+	case SENSEFB_FBIOSET_GAMMA:
-+		if (copy_from_user(gamma_user, (void __user *)arg,
-+				   sizeof(u8[32])))
-+			return -EFAULT;
-+		rpisense_fb_param.gamma = gamma_user;
-+		schedule_delayed_work(&info->deferred_work,
-+				      rpisense_fb_defio.delay);
-+		return 0;
-+	case SENSEFB_FBIORESET_GAMMA:
-+		switch (arg) {
-+		case 0:
-+			rpisense_fb_param.gamma = gamma_default;
-+			break;
-+		case 1:
-+			rpisense_fb_param.gamma = gamma_low;
-+			break;
-+		case 2:
-+			rpisense_fb_param.gamma = gamma_user;
-+			break;
-+		default:
-+			return -EINVAL;
-+		}
-+		schedule_delayed_work(&info->deferred_work,
-+				      rpisense_fb_defio.delay);
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+	return 0;
-+}
-+
-+static struct fb_ops rpisense_fb_ops = {
-+	.owner		= THIS_MODULE,
-+	.fb_read	= fb_sys_read,
-+	.fb_write	= rpisense_fb_write,
-+	.fb_fillrect	= rpisense_fb_fillrect,
-+	.fb_copyarea	= rpisense_fb_copyarea,
-+	.fb_imageblit	= rpisense_fb_imageblit,
-+	.fb_ioctl	= rpisense_fb_ioctl,
-+};
-+
-+static int rpisense_fb_probe(struct platform_device *pdev)
-+{
-+	struct fb_info *info;
-+	int ret = -ENOMEM;
-+	struct rpisense_fb *rpisense_fb;
-+
-+	rpisense = rpisense_get_dev();
-+	rpisense_fb = &rpisense->framebuffer;
-+
-+	rpisense_fb_param.vmem = vzalloc(rpisense_fb_param.vmemsize);
-+	if (!rpisense_fb_param.vmem)
-+		return ret;
-+
-+	rpisense_fb_param.vmem_work = devm_kmalloc(&pdev->dev, 193, GFP_KERNEL);
-+	if (!rpisense_fb_param.vmem_work)
-+		goto err_malloc;
-+
-+	info = framebuffer_alloc(0, &pdev->dev);
-+	if (!info) {
-+		dev_err(&pdev->dev, "Could not allocate framebuffer.\n");
-+		goto err_malloc;
-+	}
-+	rpisense_fb->info = info;
-+
-+	rpisense_fb_fix.smem_start = (unsigned long)rpisense_fb_param.vmem;
-+	rpisense_fb_fix.smem_len = rpisense_fb_param.vmemsize;
-+
-+	info->fbops = &rpisense_fb_ops;
-+	info->fix = rpisense_fb_fix;
-+	info->var = rpisense_fb_var;
-+	info->fbdefio = &rpisense_fb_defio;
-+	info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB;
-+	info->screen_base = rpisense_fb_param.vmem;
-+	info->screen_size = rpisense_fb_param.vmemsize;
-+
-+	if (lowlight)
-+		rpisense_fb_param.gamma = gamma_low;
-+
-+	fb_deferred_io_init(info);
-+
-+	ret = register_framebuffer(info);
-+	if (ret < 0) {
-+		dev_err(&pdev->dev, "Could not register framebuffer.\n");
-+		goto err_fballoc;
-+	}
-+
-+	fb_info(info, "%s frame buffer device\n", info->fix.id);
-+	schedule_delayed_work(&info->deferred_work, rpisense_fb_defio.delay);
-+	return 0;
-+err_fballoc:
-+	framebuffer_release(info);
-+err_malloc:
-+	vfree(rpisense_fb_param.vmem);
-+	return ret;
-+}
-+
-+static int rpisense_fb_remove(struct platform_device *pdev)
-+{
-+	struct rpisense_fb *rpisense_fb = &rpisense->framebuffer;
-+	struct fb_info *info = rpisense_fb->info;
-+
-+	if (info) {
-+		unregister_framebuffer(info);
-+		fb_deferred_io_cleanup(info);
-+		framebuffer_release(info);
-+		vfree(rpisense_fb_param.vmem);
-+	}
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_OF
-+static const struct of_device_id rpisense_fb_id[] = {
-+	{ .compatible = "rpi,rpi-sense-fb" },
-+	{ },
-+};
-+MODULE_DEVICE_TABLE(of, rpisense_fb_id);
-+#endif
-+
-+static struct platform_device_id rpisense_fb_device_id[] = {
-+	{ .name = "rpi-sense-fb" },
-+	{ },
-+};
-+MODULE_DEVICE_TABLE(platform, rpisense_fb_device_id);
-+
-+static struct platform_driver rpisense_fb_driver = {
-+	.probe = rpisense_fb_probe,
-+	.remove = rpisense_fb_remove,
-+	.driver = {
-+		.name = "rpi-sense-fb",
-+		.owner = THIS_MODULE,
-+	},
-+};
-+
-+module_platform_driver(rpisense_fb_driver);
-+
-+MODULE_DESCRIPTION("Raspberry Pi Sense HAT framebuffer driver");
-+MODULE_AUTHOR("Serge Schneider <serge@raspberrypi.org>");
-+MODULE_LICENSE("GPL");
-+
---- /dev/null
-+++ b/include/linux/mfd/rpisense/core.h
-@@ -0,0 +1,47 @@
-+/*
-+ * Raspberry Pi Sense HAT core driver
-+ * http://raspberrypi.org
-+ *
-+ * Copyright (C) 2015 Raspberry Pi
-+ *
-+ * Author: Serge Schneider
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ */
-+
-+#ifndef __LINUX_MFD_RPISENSE_CORE_H_
-+#define __LINUX_MFD_RPISENSE_CORE_H_
-+
-+#include <linux/mfd/rpisense/joystick.h>
-+#include <linux/mfd/rpisense/framebuffer.h>
-+
-+/*
-+ * Register values.
-+ */
-+#define RPISENSE_FB			0x00
-+#define RPISENSE_WAI			0xF0
-+#define RPISENSE_VER			0xF1
-+#define RPISENSE_KEYS			0xF2
-+#define RPISENSE_EE_WP			0xF3
-+
-+#define RPISENSE_ID			's'
-+
-+struct rpisense {
-+	struct device *dev;
-+	struct i2c_client *i2c_client;
-+
-+	/* Client devices */
-+	struct rpisense_js joystick;
-+	struct rpisense_fb framebuffer;
-+};
-+
-+struct rpisense *rpisense_get_dev(void);
-+s32 rpisense_reg_read(struct rpisense *rpisense, int reg);
-+int rpisense_reg_write(struct rpisense *rpisense, int reg, u16 val);
-+int rpisense_block_write(struct rpisense *rpisense, const char *buf, int count);
-+
-+#endif
---- /dev/null
-+++ b/include/linux/mfd/rpisense/framebuffer.h
-@@ -0,0 +1,32 @@
-+/*
-+ * Raspberry Pi Sense HAT framebuffer driver
-+ * http://raspberrypi.org
-+ *
-+ * Copyright (C) 2015 Raspberry Pi
-+ *
-+ * Author: Serge Schneider
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ */
-+
-+#ifndef __LINUX_RPISENSE_FB_H_
-+#define __LINUX_RPISENSE_FB_H_
-+
-+#define SENSEFB_FBIO_IOC_MAGIC 0xF1
-+
-+#define SENSEFB_FBIOGET_GAMMA _IO(SENSEFB_FBIO_IOC_MAGIC, 0)
-+#define SENSEFB_FBIOSET_GAMMA _IO(SENSEFB_FBIO_IOC_MAGIC, 1)
-+#define SENSEFB_FBIORESET_GAMMA _IO(SENSEFB_FBIO_IOC_MAGIC, 2)
-+
-+struct rpisense;
-+
-+struct rpisense_fb {
-+	struct platform_device *pdev;
-+	struct fb_info *info;
-+};
-+
-+#endif
---- /dev/null
-+++ b/include/linux/mfd/rpisense/joystick.h
-@@ -0,0 +1,35 @@
-+/*
-+ * Raspberry Pi Sense HAT joystick driver
-+ * http://raspberrypi.org
-+ *
-+ * Copyright (C) 2015 Raspberry Pi
-+ *
-+ * Author: Serge Schneider
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ */
-+
-+#ifndef __LINUX_RPISENSE_JOYSTICK_H_
-+#define __LINUX_RPISENSE_JOYSTICK_H_
-+
-+#include <linux/input.h>
-+#include <linux/interrupt.h>
-+#include <linux/gpio/consumer.h>
-+#include <linux/platform_device.h>
-+
-+struct rpisense;
-+
-+struct rpisense_js {
-+	struct platform_device *pdev;
-+	struct input_dev *keys_dev;
-+	struct gpio_desc *keys_desc;
-+	struct work_struct keys_work_s;
-+	int keys_irq;
-+};
-+
-+
-+#endif

target/linux/bcm27xx/patches-4.19/950-0064-ASoC-pcm512x-implement-set_tdm_slot-interface.patch

@@ -1,80 +0,0 @@
-From 5fd7bb26ef791a7da1c0573b980ab4fe6b9c2641 Mon Sep 17 00:00:00 2001
-From: Matthias Reichl <hias@horus.com>
-Date: Thu, 22 Feb 2018 11:55:06 +0100
-Subject: [PATCH] ASoC: pcm512x: implement set_tdm_slot interface
-
-PCM512x can accept data padded with additional BCLK cycles
-but the driver currently lacks an interface to configure this.
-
-This leads to the problem that S24_LE format in master mode
-can result in non-integer clock divisors and pcm512x running
-at a rather off rate.
-
-For example 48kHz with 48fs BCLK and SCLK at 24.576MHz uses
-a divisor of 10 (rounded down from 10.6666) and results in a
-51.2kHz LRCLK. With 64fs BCLK a divisor of 8 is used and
-LRCLK runs at exactly 48kHz.
-
-Fix this by providing a minimal set_tdm_slot implementation
-so machine drivers can optionally configure custom BCLK ratios.
-
-Signed-off-by: Matthias Reichl <hias@horus.com>
----
- sound/soc/codecs/pcm512x.c | 28 +++++++++++++++++++++++++++-
- 1 file changed, 27 insertions(+), 1 deletion(-)
-
---- a/sound/soc/codecs/pcm512x.c
-+++ b/sound/soc/codecs/pcm512x.c
-@@ -53,6 +53,7 @@ struct pcm512x_priv {
- 	unsigned long overclock_pll;
- 	unsigned long overclock_dac;
- 	unsigned long overclock_dsp;
-+	int lrclk_div;
- };
- 
- /*
-@@ -851,7 +852,10 @@ static int pcm512x_set_dividers(struct s
- 	int fssp;
- 	int gpio;
- 
--	lrclk_div = snd_soc_params_to_frame_size(params);
-+	if (pcm512x->lrclk_div)
-+		lrclk_div = pcm512x->lrclk_div;
-+	else
-+		lrclk_div = snd_soc_params_to_frame_size(params);
- 	if (lrclk_div == 0) {
- 		dev_err(dev, "No LRCLK?\n");
- 		return -EINVAL;
-@@ -1319,10 +1323,32 @@ static int pcm512x_set_fmt(struct snd_so
- 	return 0;
- }
- 
-+static int pcm512x_set_tdm_slot(struct snd_soc_dai *dai,
-+	unsigned int tx_mask, unsigned int rx_mask,
-+	int slots, int width)
-+{
-+	struct snd_soc_component *component = dai->component;
-+	struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component);
-+
-+	switch (slots) {
-+	case 0:
-+		pcm512x->lrclk_div = 0;
-+		return 0;
-+	case 2:
-+		if (tx_mask != 0x03 || rx_mask != 0x03)
-+			return -EINVAL;
-+		pcm512x->lrclk_div = slots * width;
-+		return 0;
-+	default:
-+		return -EINVAL;
-+	}
-+}
-+
- static const struct snd_soc_dai_ops pcm512x_dai_ops = {
- 	.startup = pcm512x_dai_startup,
- 	.hw_params = pcm512x_hw_params,
- 	.set_fmt = pcm512x_set_fmt,
-+	.set_tdm_slot = pcm512x_set_tdm_slot,
- };
- 
- static struct snd_soc_dai_driver pcm512x_dai = {

target/linux/bcm27xx/patches-4.19/950-0065-ASoC-Add-support-for-Rpi-DAC.patch

@@ -1,123 +0,0 @@
-From 13ddc845b271d7cc79bcbdd288f95c03ea927b89 Mon Sep 17 00:00:00 2001
-From: Florian Meier <florian.meier@koalo.de>
-Date: Mon, 25 Jan 2016 15:48:59 +0000
-Subject: [PATCH] ASoC: Add support for Rpi-DAC
-
----
- sound/soc/codecs/Kconfig    |  5 +++
- sound/soc/codecs/Makefile   |  2 ++
- sound/soc/codecs/pcm1794a.c | 69 +++++++++++++++++++++++++++++++++++++
- 3 files changed, 76 insertions(+)
- create mode 100644 sound/soc/codecs/pcm1794a.c
-
---- a/sound/soc/codecs/Kconfig
-+++ b/sound/soc/codecs/Kconfig
-@@ -118,6 +118,7 @@ config SND_SOC_ALL_CODECS
- 	select SND_SOC_PCM179X_SPI if SPI_MASTER
- 	select SND_SOC_PCM186X_I2C if I2C
- 	select SND_SOC_PCM186X_SPI if SPI_MASTER
-+	select SND_SOC_PCM1794A if I2C
- 	select SND_SOC_PCM3008
- 	select SND_SOC_PCM3168A_I2C if I2C
- 	select SND_SOC_PCM3168A_SPI if SPI_MASTER
-@@ -834,6 +835,10 @@ config SND_SOC_RT5616
- 	tristate "Realtek RT5616 CODEC"
- 	depends on I2C
- 
-+config SND_SOC_PCM1794A
-+	tristate
-+	depends on I2C
-+
- config SND_SOC_RT5631
- 	tristate "Realtek ALC5631/RT5631 CODEC"
- 	depends on I2C
---- a/sound/soc/codecs/Makefile
-+++ b/sound/soc/codecs/Makefile
-@@ -118,6 +118,7 @@ snd-soc-pcm179x-spi-objs := pcm179x-spi.
- snd-soc-pcm186x-objs := pcm186x.o
- snd-soc-pcm186x-i2c-objs := pcm186x-i2c.o
- snd-soc-pcm186x-spi-objs := pcm186x-spi.o
-+snd-soc-pcm1794a-objs := pcm1794a.o
- snd-soc-pcm3008-objs := pcm3008.o
- snd-soc-pcm3168a-objs := pcm3168a.o
- snd-soc-pcm3168a-i2c-objs := pcm3168a-i2c.o
-@@ -386,6 +387,7 @@ obj-$(CONFIG_SND_SOC_PCM5102A)	+= snd-so
- obj-$(CONFIG_SND_SOC_PCM512x)	+= snd-soc-pcm512x.o
- obj-$(CONFIG_SND_SOC_PCM512x_I2C)	+= snd-soc-pcm512x-i2c.o
- obj-$(CONFIG_SND_SOC_PCM512x_SPI)	+= snd-soc-pcm512x-spi.o
-+obj-$(CONFIG_SND_SOC_PCM1794A)	+= snd-soc-pcm1794a.o
- obj-$(CONFIG_SND_SOC_RL6231)	+= snd-soc-rl6231.o
- obj-$(CONFIG_SND_SOC_RL6347A)	+= snd-soc-rl6347a.o
- obj-$(CONFIG_SND_SOC_RT1305)	+= snd-soc-rt1305.o
---- /dev/null
-+++ b/sound/soc/codecs/pcm1794a.c
-@@ -0,0 +1,69 @@
-+/*
-+ * Driver for the PCM1794A codec
-+ *
-+ * Author:	Florian Meier <florian.meier@koalo.de>
-+ *		Copyright 2013
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ */
-+
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <sound/soc.h>
-+
-+static struct snd_soc_dai_driver pcm1794a_dai = {
-+	.name = "pcm1794a-hifi",
-+	.playback = {
-+		.channels_min = 2,
-+		.channels_max = 2,
-+		.rates = SNDRV_PCM_RATE_8000_192000,
-+		.formats = SNDRV_PCM_FMTBIT_S16_LE |
-+			   SNDRV_PCM_FMTBIT_S24_LE
-+	},
-+};
-+
-+static struct snd_soc_component_driver soc_component_dev_pcm1794a;
-+
-+static int pcm1794a_probe(struct platform_device *pdev)
-+{
-+	return snd_soc_register_component(&pdev->dev, &soc_component_dev_pcm1794a,
-+			&pcm1794a_dai, 1);
-+}
-+
-+static int pcm1794a_remove(struct platform_device *pdev)
-+{
-+	snd_soc_unregister_component(&pdev->dev);
-+	return 0;
-+}
-+
-+static const struct of_device_id pcm1794a_of_match[] = {
-+	{ .compatible = "ti,pcm1794a", },
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(of, pcm1794a_of_match);
-+
-+static struct platform_driver pcm1794a_component_driver = {
-+	.probe 		= pcm1794a_probe,
-+	.remove 	= pcm1794a_remove,
-+	.driver		= {
-+		.name	= "pcm1794a-codec",
-+		.owner	= THIS_MODULE,
-+		.of_match_table = of_match_ptr(pcm1794a_of_match),
-+	},
-+};
-+
-+module_platform_driver(pcm1794a_component_driver);
-+
-+MODULE_DESCRIPTION("ASoC PCM1794A codec driver");
-+MODULE_AUTHOR("Florian Meier <florian.meier@koalo.de>");
-+MODULE_LICENSE("GPL v2");

target/linux/bcm27xx/patches-4.19/950-0066-Add-IQaudIO-Sound-Card-support-for-Raspberry-Pi.patch

@@ -1,292 +0,0 @@
-From 76c252645ad542bd35ce52230635f36e3c0f730d Mon Sep 17 00:00:00 2001
-From: Gordon Garrity <gordon@iqaudio.com>
-Date: Sat, 8 Mar 2014 16:56:57 +0000
-Subject: [PATCH] Add IQaudIO Sound Card support for Raspberry Pi
-
-Set a limit of 0dB on Digital Volume Control
-
-The main volume control in the PCM512x DAC has a range up to
-+24dB. This is dangerously loud and can potentially cause massive
-clipping in the output stages. Therefore this sets a sensible
-limit of 0dB for this control.
-
-Allow up to 24dB digital gain to be applied when using IQAudIO DAC+
-
-24db_digital_gain DT param can be used to specify that PCM512x
-codec "Digital" volume control should not be limited to 0dB gain,
-and if specified will allow the full 24dB gain.
-
-Modify IQAudIO DAC+ ASoC driver to set card/dai config from dt
-
-Add the ability to set the card name, dai name and dai stream name, from
-dt config.
-
-Signed-off-by: DigitalDreamtime <clive.messer@digitaldreamtime.co.uk>
-
-IQaudIO: auto-mute for AMP+ and DigiAMP+
-
-IQAudIO amplifier mute via GPIO22. Add dt params for "one-shot" unmute
-and auto mute.
-
-Revision 2, auto mute implementing HiassofT suggestion to mute/unmute
-using set_bias_level, rather than startup/shutdown....
-"By default DAPM waits 5 seconds (pmdown_time) before shutting down
-playback streams so a close/stop immediately followed by open/start
-doesn't trigger an amp mute+unmute."
-
-Tested on both AMP+ (via DAC+) and DigiAMP+, with both options...
-
-dtoverlay=iqaudio-dacplus,unmute_amp
- "one-shot" unmute when kernel module loads.
-
-dtoverlay=iqaudio-dacplus,auto_mute_amp
- Unmute amp when ALSA device opened by a client. Mute, with 5 second delay
- when ALSA device closed. (Re-opening the device within the 5 second close
- window, will cancel mute.)
-
-Revision 4, using gpiod.
-
-Revision 5, clean-up formatting before adding mute code.
- - Convert tab plus 4 space formatting to 2x tab
- - Remove '// NOT USED' commented code
-
-Revision 6, don't attempt to "one-shot" unmute amp, unless card is
-successfully registered.
-
-Signed-off-by: DigitalDreamtime <clive.messer@digitaldreamtime.co.uk>
-
-ASoC: iqaudio-dac: fix S24_LE format
-
-Remove set_bclk_ratio call so 24-bit data is transmitted in
-24 bclk cycles.
-
-Signed-off-by: Matthias Reichl <hias@horus.com>
----
- sound/soc/bcm/iqaudio-dac.c | 221 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 221 insertions(+)
- create mode 100644 sound/soc/bcm/iqaudio-dac.c
-
---- /dev/null
-+++ b/sound/soc/bcm/iqaudio-dac.c
-@@ -0,0 +1,221 @@
-+/*
-+ * ASoC Driver for IQaudIO DAC
-+ *
-+ * Author:	Florian Meier <florian.meier@koalo.de>
-+ *		Copyright 2013
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/gpio/consumer.h>
-+#include <linux/platform_device.h>
-+
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/pcm_params.h>
-+#include <sound/soc.h>
-+#include <sound/jack.h>
-+
-+static bool digital_gain_0db_limit = true;
-+
-+static struct gpio_desc *mute_gpio;
-+
-+static int snd_rpi_iqaudio_dac_init(struct snd_soc_pcm_runtime *rtd)
-+{
-+	if (digital_gain_0db_limit)
-+	{
-+		int ret;
-+		struct snd_soc_card *card = rtd->card;
-+
-+		ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207);
-+		if (ret < 0)
-+			dev_warn(card->dev, "Failed to set volume limit: %d\n", ret);
-+	}
-+
-+	return 0;
-+}
-+
-+static void snd_rpi_iqaudio_gpio_mute(struct snd_soc_card *card)
-+{
-+	if (mute_gpio) {
-+		dev_info(card->dev, "%s: muting amp using GPIO22\n",
-+			 __func__);
-+		gpiod_set_value_cansleep(mute_gpio, 0);
-+	}
-+}
-+
-+static void snd_rpi_iqaudio_gpio_unmute(struct snd_soc_card *card)
-+{
-+	if (mute_gpio) {
-+		dev_info(card->dev, "%s: un-muting amp using GPIO22\n",
-+			 __func__);
-+		gpiod_set_value_cansleep(mute_gpio, 1);
-+	}
-+}
-+
-+static int snd_rpi_iqaudio_set_bias_level(struct snd_soc_card *card,
-+	struct snd_soc_dapm_context *dapm, enum snd_soc_bias_level level)
-+{
-+	struct snd_soc_pcm_runtime *rtd;
-+	struct snd_soc_dai *codec_dai;
-+
-+	rtd = snd_soc_get_pcm_runtime(card, card->dai_link[0].name);
-+	codec_dai = rtd->codec_dai;
-+
-+	if (dapm->dev != codec_dai->dev)
-+		return 0;
-+
-+	switch (level) {
-+	case SND_SOC_BIAS_PREPARE:
-+		if (dapm->bias_level != SND_SOC_BIAS_STANDBY)
-+			break;
-+
-+		/* UNMUTE AMP */
-+		snd_rpi_iqaudio_gpio_unmute(card);
-+
-+		break;
-+	case SND_SOC_BIAS_STANDBY:
-+		if (dapm->bias_level != SND_SOC_BIAS_PREPARE)
-+			break;
-+
-+		/* MUTE AMP */
-+		snd_rpi_iqaudio_gpio_mute(card);
-+
-+		break;
-+	default:
-+		break;
-+	}
-+
-+	return 0;
-+}
-+
-+static struct snd_soc_dai_link snd_rpi_iqaudio_dac_dai[] = {
-+{
-+	.cpu_dai_name	= "bcm2708-i2s.0",
-+	.codec_dai_name	= "pcm512x-hifi",
-+	.platform_name	= "bcm2708-i2s.0",
-+	.codec_name	= "pcm512x.1-004c",
-+	.dai_fmt	= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
-+				SND_SOC_DAIFMT_CBS_CFS,
-+	.init		= snd_rpi_iqaudio_dac_init,
-+},
-+};
-+
-+/* audio machine driver */
-+static struct snd_soc_card snd_rpi_iqaudio_dac = {
-+	.owner        = THIS_MODULE,
-+	.dai_link     = snd_rpi_iqaudio_dac_dai,
-+	.num_links    = ARRAY_SIZE(snd_rpi_iqaudio_dac_dai),
-+};
-+
-+static int snd_rpi_iqaudio_dac_probe(struct platform_device *pdev)
-+{
-+	int ret = 0;
-+	bool gpio_unmute = false;
-+
-+	snd_rpi_iqaudio_dac.dev = &pdev->dev;
-+
-+	if (pdev->dev.of_node) {
-+		struct device_node *i2s_node;
-+		struct snd_soc_card *card = &snd_rpi_iqaudio_dac;
-+		struct snd_soc_dai_link *dai = &snd_rpi_iqaudio_dac_dai[0];
-+		bool auto_gpio_mute = false;
-+
-+		i2s_node = of_parse_phandle(pdev->dev.of_node,
-+					    "i2s-controller", 0);
-+		if (i2s_node) {
-+			dai->cpu_dai_name = NULL;
-+			dai->cpu_of_node = i2s_node;
-+			dai->platform_name = NULL;
-+			dai->platform_of_node = i2s_node;
-+		}
-+
-+		digital_gain_0db_limit = !of_property_read_bool(
-+			pdev->dev.of_node, "iqaudio,24db_digital_gain");
-+
-+		if (of_property_read_string(pdev->dev.of_node, "card_name",
-+					    &card->name))
-+			card->name = "IQaudIODAC";
-+
-+		if (of_property_read_string(pdev->dev.of_node, "dai_name",
-+					    &dai->name))
-+			dai->name = "IQaudIO DAC";
-+
-+		if (of_property_read_string(pdev->dev.of_node,
-+					"dai_stream_name", &dai->stream_name))
-+			dai->stream_name = "IQaudIO DAC HiFi";
-+
-+		/* gpio_unmute - one time unmute amp using GPIO */
-+		gpio_unmute = of_property_read_bool(pdev->dev.of_node,
-+						    "iqaudio-dac,unmute-amp");
-+
-+		/* auto_gpio_mute - mute/unmute amp using GPIO */
-+		auto_gpio_mute = of_property_read_bool(pdev->dev.of_node,
-+						"iqaudio-dac,auto-mute-amp");
-+
-+		if (auto_gpio_mute || gpio_unmute) {
-+			mute_gpio = devm_gpiod_get_optional(&pdev->dev, "mute",
-+							    GPIOD_OUT_LOW);
-+			if (IS_ERR(mute_gpio)) {
-+				ret = PTR_ERR(mute_gpio);
-+				dev_err(&pdev->dev,
-+					"Failed to get mute gpio: %d\n", ret);
-+				return ret;
-+			}
-+
-+			if (auto_gpio_mute && mute_gpio)
-+				snd_rpi_iqaudio_dac.set_bias_level =
-+						snd_rpi_iqaudio_set_bias_level;
-+		}
-+	}
-+
-+	ret = snd_soc_register_card(&snd_rpi_iqaudio_dac);
-+	if (ret) {
-+		if (ret != -EPROBE_DEFER)
-+			dev_err(&pdev->dev,
-+				"snd_soc_register_card() failed: %d\n", ret);
-+		return ret;
-+	}
-+
-+	if (gpio_unmute && mute_gpio)
-+		snd_rpi_iqaudio_gpio_unmute(&snd_rpi_iqaudio_dac);
-+
-+	return 0;
-+}
-+
-+static int snd_rpi_iqaudio_dac_remove(struct platform_device *pdev)
-+{
-+	snd_rpi_iqaudio_gpio_mute(&snd_rpi_iqaudio_dac);
-+
-+	return snd_soc_unregister_card(&snd_rpi_iqaudio_dac);
-+}
-+
-+static const struct of_device_id iqaudio_of_match[] = {
-+	{ .compatible = "iqaudio,iqaudio-dac", },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, iqaudio_of_match);
-+
-+static struct platform_driver snd_rpi_iqaudio_dac_driver = {
-+	.driver = {
-+		.name   = "snd-rpi-iqaudio-dac",
-+		.owner  = THIS_MODULE,
-+		.of_match_table = iqaudio_of_match,
-+	},
-+	.probe          = snd_rpi_iqaudio_dac_probe,
-+	.remove         = snd_rpi_iqaudio_dac_remove,
-+};
-+
-+module_platform_driver(snd_rpi_iqaudio_dac_driver);
-+
-+MODULE_AUTHOR("Florian Meier <florian.meier@koalo.de>");
-+MODULE_DESCRIPTION("ASoC Driver for IQAudio DAC");
-+MODULE_LICENSE("GPL v2");

target/linux/bcm27xx/patches-4.19/950-0067-Added-support-for-HiFiBerry-DAC.patch

@@ -1,595 +0,0 @@
-From 86d09076abd36ad87477c21f7b33c90cb696e196 Mon Sep 17 00:00:00 2001
-From: Daniel Matuschek <info@crazy-audio.com>
-Date: Mon, 4 Aug 2014 10:06:56 +0200
-Subject: [PATCH] Added support for HiFiBerry DAC+
-
-The driver is based on the HiFiBerry DAC driver. However HiFiBerry DAC+ uses
-a different codec chip (PCM5122), therefore a new driver is necessary.
-
-Add support for the HiFiBerry DAC+ Pro.
-
-The HiFiBerry DAC+ and DAC+ Pro products both use the existing bcm sound driver with the DAC+ Pro having a special clock device driver representing the two high precision oscillators.
-
-An addition bug fix is included for the PCM512x codec where by the physical size of the sample frame is used in the calculation of the LRCK divisor as it was found to be wrong when using 24-bit depth sample contained in a little endian 4-byte sample frame.
-
-Limit PCM512x "Digital" gain to 0dB by default with HiFiBerry DAC+
-
-24db_digital_gain DT param can be used to specify that PCM512x
-codec "Digital" volume control should not be limited to 0dB gain,
-and if specified will allow the full 24dB gain.
-
-Add dt param to force HiFiBerry DAC+ Pro into slave mode
-
-"dtoverlay=hifiberry-dacplus,slave"
-
-Add 'slave' param to use HiFiBerry DAC+ Pro in slave mode,
-with Pi as master for bit and frame clock.
-
-Signed-off-by: DigitalDreamtime <clive.messer@digitaldreamtime.co.uk>
-
-Fixed a bug when using 352.8kHz sample rate
-
-Signed-off-by: Daniel Matuschek <daniel@hifiberry.com>
-
-ASoC: pcm512x: revert downstream changes
-
-This partially reverts commit 185ea05465aac8bf02a0d2b2f4289d42c72870b7
-which was added by https://github.com/raspberrypi/linux/pull/1152
-
-The downstream pcm512x changes caused a regression, it broke normal
-use of the 24bit format with the codec, eg when using simple-audio-card.
-
-The actual bug with 24bit playback is the incorrect usage
-of physical_width in various drivers in the downstream tree
-which causes 24bit data to be transmitted with 32 clock
-cycles. So it's not the pcm512x that needs fixing, it's the
-soundcard drivers.
-
-Signed-off-by: Matthias Reichl <hias@horus.com>
-
-ASoC: hifiberry_dacplus: fix S24_LE format
-
-Remove set_bclk_ratio call so 24-bit data is transmitted in
-24 bclk cycles.
-
-Signed-off-by: Matthias Reichl <hias@horus.com>
-
-ASoC: hifiberry_dacplus: transmit S24_LE with 64 BCLK cycles
-
-Signed-off-by: Matthias Reichl <hias@horus.com>
----
- drivers/clk/Makefile               |   1 +
- drivers/clk/clk-hifiberry-dacpro.c | 160 +++++++++++++
- sound/soc/bcm/hifiberry_dacplus.c  | 352 +++++++++++++++++++++++++++++
- 3 files changed, 513 insertions(+)
- create mode 100644 drivers/clk/clk-hifiberry-dacpro.c
- create mode 100644 sound/soc/bcm/hifiberry_dacplus.c
-
---- a/drivers/clk/Makefile
-+++ b/drivers/clk/Makefile
-@@ -30,6 +30,7 @@ obj-$(CONFIG_COMMON_CLK_GEMINI)		+= clk-
- obj-$(CONFIG_COMMON_CLK_ASPEED)		+= clk-aspeed.o
- obj-$(CONFIG_ARCH_HIGHBANK)		+= clk-highbank.o
- obj-$(CONFIG_CLK_HSDK)			+= clk-hsdk-pll.o
-+obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += clk-hifiberry-dacpro.o
- obj-$(CONFIG_COMMON_CLK_MAX77686)	+= clk-max77686.o
- obj-$(CONFIG_COMMON_CLK_MAX9485)	+= clk-max9485.o
- obj-$(CONFIG_ARCH_MOXART)		+= clk-moxart.o
---- /dev/null
-+++ b/drivers/clk/clk-hifiberry-dacpro.c
-@@ -0,0 +1,160 @@
-+/*
-+ * Clock Driver for HiFiBerry DAC Pro
-+ *
-+ * Author: Stuart MacLean
-+ *         Copyright 2015
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/clkdev.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+
-+/* Clock rate of CLK44EN attached to GPIO6 pin */
-+#define CLK_44EN_RATE 22579200UL
-+/* Clock rate of CLK48EN attached to GPIO3 pin */
-+#define CLK_48EN_RATE 24576000UL
-+
-+/**
-+ * struct hifiberry_dacpro_clk - Common struct to the HiFiBerry DAC Pro
-+ * @hw: clk_hw for the common clk framework
-+ * @mode: 0 => CLK44EN, 1 => CLK48EN
-+ */
-+struct clk_hifiberry_hw {
-+	struct clk_hw hw;
-+	uint8_t mode;
-+};
-+
-+#define to_hifiberry_clk(_hw) container_of(_hw, struct clk_hifiberry_hw, hw)
-+
-+static const struct of_device_id clk_hifiberry_dacpro_dt_ids[] = {
-+	{ .compatible = "hifiberry,dacpro-clk",},
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(of, clk_hifiberry_dacpro_dt_ids);
-+
-+static unsigned long clk_hifiberry_dacpro_recalc_rate(struct clk_hw *hw,
-+	unsigned long parent_rate)
-+{
-+	return (to_hifiberry_clk(hw)->mode == 0) ? CLK_44EN_RATE :
-+		CLK_48EN_RATE;
-+}
-+
-+static long clk_hifiberry_dacpro_round_rate(struct clk_hw *hw,
-+	unsigned long rate, unsigned long *parent_rate)
-+{
-+	long actual_rate;
-+
-+	if (rate <= CLK_44EN_RATE) {
-+		actual_rate = (long)CLK_44EN_RATE;
-+	} else if (rate >= CLK_48EN_RATE) {
-+		actual_rate = (long)CLK_48EN_RATE;
-+	} else {
-+		long diff44Rate = (long)(rate - CLK_44EN_RATE);
-+		long diff48Rate = (long)(CLK_48EN_RATE - rate);
-+
-+		if (diff44Rate < diff48Rate)
-+			actual_rate = (long)CLK_44EN_RATE;
-+		else
-+			actual_rate = (long)CLK_48EN_RATE;
-+	}
-+	return actual_rate;
-+}
-+
-+
-+static int clk_hifiberry_dacpro_set_rate(struct clk_hw *hw,
-+	unsigned long rate, unsigned long parent_rate)
-+{
-+	unsigned long actual_rate;
-+	struct clk_hifiberry_hw *clk = to_hifiberry_clk(hw);
-+
-+	actual_rate = (unsigned long)clk_hifiberry_dacpro_round_rate(hw, rate,
-+		&parent_rate);
-+	clk->mode = (actual_rate == CLK_44EN_RATE) ? 0 : 1;
-+	return 0;
-+}
-+
-+
-+const struct clk_ops clk_hifiberry_dacpro_rate_ops = {
-+	.recalc_rate = clk_hifiberry_dacpro_recalc_rate,
-+	.round_rate = clk_hifiberry_dacpro_round_rate,
-+	.set_rate = clk_hifiberry_dacpro_set_rate,
-+};
-+
-+static int clk_hifiberry_dacpro_probe(struct platform_device *pdev)
-+{
-+	int ret;
-+	struct clk_hifiberry_hw *proclk;
-+	struct clk *clk;
-+	struct device *dev;
-+	struct clk_init_data init;
-+
-+	dev = &pdev->dev;
-+
-+	proclk = kzalloc(sizeof(struct clk_hifiberry_hw), GFP_KERNEL);
-+	if (!proclk)
-+		return -ENOMEM;
-+
-+	init.name = "clk-hifiberry-dacpro";
-+	init.ops = &clk_hifiberry_dacpro_rate_ops;
-+	init.flags = CLK_IS_BASIC;
-+	init.parent_names = NULL;
-+	init.num_parents = 0;
-+
-+	proclk->mode = 0;
-+	proclk->hw.init = &init;
-+
-+	clk = devm_clk_register(dev, &proclk->hw);
-+	if (!IS_ERR(clk)) {
-+		ret = of_clk_add_provider(dev->of_node, of_clk_src_simple_get,
-+			clk);
-+	} else {
-+		dev_err(dev, "Fail to register clock driver\n");
-+		kfree(proclk);
-+		ret = PTR_ERR(clk);
-+	}
-+	return ret;
-+}
-+
-+static int clk_hifiberry_dacpro_remove(struct platform_device *pdev)
-+{
-+	of_clk_del_provider(pdev->dev.of_node);
-+	return 0;
-+}
-+
-+static struct platform_driver clk_hifiberry_dacpro_driver = {
-+	.probe = clk_hifiberry_dacpro_probe,
-+	.remove = clk_hifiberry_dacpro_remove,
-+	.driver = {
-+		.name = "clk-hifiberry-dacpro",
-+		.of_match_table = clk_hifiberry_dacpro_dt_ids,
-+	},
-+};
-+
-+static int __init clk_hifiberry_dacpro_init(void)
-+{
-+	return platform_driver_register(&clk_hifiberry_dacpro_driver);
-+}
-+core_initcall(clk_hifiberry_dacpro_init);
-+
-+static void __exit clk_hifiberry_dacpro_exit(void)
-+{
-+	platform_driver_unregister(&clk_hifiberry_dacpro_driver);
-+}
-+module_exit(clk_hifiberry_dacpro_exit);
-+
-+MODULE_DESCRIPTION("HiFiBerry DAC Pro clock driver");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:clk-hifiberry-dacpro");
---- /dev/null
-+++ b/sound/soc/bcm/hifiberry_dacplus.c
-@@ -0,0 +1,352 @@
-+/*
-+ * ASoC Driver for HiFiBerry DAC+ / DAC Pro
-+ *
-+ * Author:	Daniel Matuschek, Stuart MacLean <stuart@hifiberry.com>
-+ *		Copyright 2014-2015
-+ *		based on code by Florian Meier <florian.meier@koalo.de>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/kernel.h>
-+#include <linux/clk.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/pcm_params.h>
-+#include <sound/soc.h>
-+#include <sound/jack.h>
-+
-+#include "../codecs/pcm512x.h"
-+
-+#define HIFIBERRY_DACPRO_NOCLOCK 0
-+#define HIFIBERRY_DACPRO_CLK44EN 1
-+#define HIFIBERRY_DACPRO_CLK48EN 2
-+
-+struct pcm512x_priv {
-+	struct regmap *regmap;
-+	struct clk *sclk;
-+};
-+
-+/* Clock rate of CLK44EN attached to GPIO6 pin */
-+#define CLK_44EN_RATE 22579200UL
-+/* Clock rate of CLK48EN attached to GPIO3 pin */
-+#define CLK_48EN_RATE 24576000UL
-+
-+static bool slave;
-+static bool snd_rpi_hifiberry_is_dacpro;
-+static bool digital_gain_0db_limit = true;
-+
-+static void snd_rpi_hifiberry_dacplus_select_clk(struct snd_soc_component *component,
-+	int clk_id)
-+{
-+	switch (clk_id) {
-+	case HIFIBERRY_DACPRO_NOCLOCK:
-+		snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x24, 0x00);
-+		break;
-+	case HIFIBERRY_DACPRO_CLK44EN:
-+		snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x24, 0x20);
-+		break;
-+	case HIFIBERRY_DACPRO_CLK48EN:
-+		snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x24, 0x04);
-+		break;
-+	}
-+}
-+
-+static void snd_rpi_hifiberry_dacplus_clk_gpio(struct snd_soc_component *component)
-+{
-+	snd_soc_component_update_bits(component, PCM512x_GPIO_EN, 0x24, 0x24);
-+	snd_soc_component_update_bits(component, PCM512x_GPIO_OUTPUT_3, 0x0f, 0x02);
-+	snd_soc_component_update_bits(component, PCM512x_GPIO_OUTPUT_6, 0x0f, 0x02);
-+}
-+
-+static bool snd_rpi_hifiberry_dacplus_is_sclk(struct snd_soc_component *component)
-+{
-+	unsigned int sck;
-+
-+	snd_soc_component_read(component, PCM512x_RATE_DET_4, &sck);
-+	return (!(sck & 0x40));
-+}
-+
-+static bool snd_rpi_hifiberry_dacplus_is_sclk_sleep(
-+	struct snd_soc_component *component)
-+{
-+	msleep(2);
-+	return snd_rpi_hifiberry_dacplus_is_sclk(component);
-+}
-+
-+static bool snd_rpi_hifiberry_dacplus_is_pro_card(struct snd_soc_component *component)
-+{
-+	bool isClk44EN, isClk48En, isNoClk;
-+
-+	snd_rpi_hifiberry_dacplus_clk_gpio(component);
-+
-+	snd_rpi_hifiberry_dacplus_select_clk(component, HIFIBERRY_DACPRO_CLK44EN);
-+	isClk44EN = snd_rpi_hifiberry_dacplus_is_sclk_sleep(component);
-+
-+	snd_rpi_hifiberry_dacplus_select_clk(component, HIFIBERRY_DACPRO_NOCLOCK);
-+	isNoClk = snd_rpi_hifiberry_dacplus_is_sclk_sleep(component);
-+
-+	snd_rpi_hifiberry_dacplus_select_clk(component, HIFIBERRY_DACPRO_CLK48EN);
-+	isClk48En = snd_rpi_hifiberry_dacplus_is_sclk_sleep(component);
-+
-+	return (isClk44EN && isClk48En && !isNoClk);
-+}
-+
-+static int snd_rpi_hifiberry_dacplus_clk_for_rate(int sample_rate)
-+{
-+	int type;
-+
-+	switch (sample_rate) {
-+	case 11025:
-+	case 22050:
-+	case 44100:
-+	case 88200:
-+	case 176400:
-+	case 352800:
-+		type = HIFIBERRY_DACPRO_CLK44EN;
-+		break;
-+	default:
-+		type = HIFIBERRY_DACPRO_CLK48EN;
-+		break;
-+	}
-+	return type;
-+}
-+
-+static void snd_rpi_hifiberry_dacplus_set_sclk(struct snd_soc_component *component,
-+	int sample_rate)
-+{
-+	struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component);
-+
-+	if (!IS_ERR(pcm512x->sclk)) {
-+		int ctype;
-+
-+		ctype = snd_rpi_hifiberry_dacplus_clk_for_rate(sample_rate);
-+		clk_set_rate(pcm512x->sclk, (ctype == HIFIBERRY_DACPRO_CLK44EN)
-+			? CLK_44EN_RATE : CLK_48EN_RATE);
-+		snd_rpi_hifiberry_dacplus_select_clk(component, ctype);
-+	}
-+}
-+
-+static int snd_rpi_hifiberry_dacplus_init(struct snd_soc_pcm_runtime *rtd)
-+{
-+	struct snd_soc_component *component = rtd->codec_dai->component;
-+	struct pcm512x_priv *priv;
-+
-+	if (slave)
-+		snd_rpi_hifiberry_is_dacpro = false;
-+	else
-+		snd_rpi_hifiberry_is_dacpro =
-+				snd_rpi_hifiberry_dacplus_is_pro_card(component);
-+
-+	if (snd_rpi_hifiberry_is_dacpro) {
-+		struct snd_soc_dai_link *dai = rtd->dai_link;
-+
-+		dai->name = "HiFiBerry DAC+ Pro";
-+		dai->stream_name = "HiFiBerry DAC+ Pro HiFi";
-+		dai->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
-+			| SND_SOC_DAIFMT_CBM_CFM;
-+
-+		snd_soc_component_update_bits(component, PCM512x_BCLK_LRCLK_CFG, 0x31, 0x11);
-+		snd_soc_component_update_bits(component, PCM512x_MASTER_MODE, 0x03, 0x03);
-+		snd_soc_component_update_bits(component, PCM512x_MASTER_CLKDIV_2, 0x7f, 63);
-+	} else {
-+		priv = snd_soc_component_get_drvdata(component);
-+		priv->sclk = ERR_PTR(-ENOENT);
-+	}
-+
-+	snd_soc_component_update_bits(component, PCM512x_GPIO_EN, 0x08, 0x08);
-+	snd_soc_component_update_bits(component, PCM512x_GPIO_OUTPUT_4, 0x0f, 0x02);
-+	snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x08, 0x08);
-+
-+	if (digital_gain_0db_limit)
-+	{
-+		int ret;
-+		struct snd_soc_card *card = rtd->card;
-+
-+		ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207);
-+		if (ret < 0)
-+			dev_warn(card->dev, "Failed to set volume limit: %d\n", ret);
-+	}
-+
-+	return 0;
-+}
-+
-+static int snd_rpi_hifiberry_dacplus_update_rate_den(
-+	struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params)
-+{
-+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+	struct snd_soc_component *component = rtd->codec_dai->component;
-+	struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component);
-+	struct snd_ratnum *rats_no_pll;
-+	unsigned int num = 0, den = 0;
-+	int err;
-+
-+	rats_no_pll = devm_kzalloc(rtd->dev, sizeof(*rats_no_pll), GFP_KERNEL);
-+	if (!rats_no_pll)
-+		return -ENOMEM;
-+
-+	rats_no_pll->num = clk_get_rate(pcm512x->sclk) / 64;
-+	rats_no_pll->den_min = 1;
-+	rats_no_pll->den_max = 128;
-+	rats_no_pll->den_step = 1;
-+
-+	err = snd_interval_ratnum(hw_param_interval(params,
-+		SNDRV_PCM_HW_PARAM_RATE), 1, rats_no_pll, &num, &den);
-+	if (err >= 0 && den) {
-+		params->rate_num = num;
-+		params->rate_den = den;
-+	}
-+
-+	devm_kfree(rtd->dev, rats_no_pll);
-+	return 0;
-+}
-+
-+static int snd_rpi_hifiberry_dacplus_hw_params(
-+	struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params)
-+{
-+	int ret = 0;
-+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+	int channels = params_channels(params);
-+	int width = 32;
-+
-+	if (snd_rpi_hifiberry_is_dacpro) {
-+		struct snd_soc_component *component = rtd->codec_dai->component;
-+
-+		width = snd_pcm_format_physical_width(params_format(params));
-+
-+		snd_rpi_hifiberry_dacplus_set_sclk(component,
-+			params_rate(params));
-+
-+		ret = snd_rpi_hifiberry_dacplus_update_rate_den(
-+			substream, params);
-+	}
-+
-+	ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x03, 0x03,
-+		channels, width);
-+	if (ret)
-+		return ret;
-+	ret = snd_soc_dai_set_tdm_slot(rtd->codec_dai, 0x03, 0x03,
-+		channels, width);
-+	return ret;
-+}
-+
-+static int snd_rpi_hifiberry_dacplus_startup(
-+	struct snd_pcm_substream *substream)
-+{
-+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+	struct snd_soc_component *component = rtd->codec_dai->component;
-+
-+	snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x08, 0x08);
-+	return 0;
-+}
-+
-+static void snd_rpi_hifiberry_dacplus_shutdown(
-+	struct snd_pcm_substream *substream)
-+{
-+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+	struct snd_soc_component *component = rtd->codec_dai->component;
-+
-+	snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x08, 0x00);
-+}
-+
-+/* machine stream operations */
-+static struct snd_soc_ops snd_rpi_hifiberry_dacplus_ops = {
-+	.hw_params = snd_rpi_hifiberry_dacplus_hw_params,
-+	.startup = snd_rpi_hifiberry_dacplus_startup,
-+	.shutdown = snd_rpi_hifiberry_dacplus_shutdown,
-+};
-+
-+static struct snd_soc_dai_link snd_rpi_hifiberry_dacplus_dai[] = {
-+{
-+	.name		= "HiFiBerry DAC+",
-+	.stream_name	= "HiFiBerry DAC+ HiFi",
-+	.cpu_dai_name	= "bcm2708-i2s.0",
-+	.codec_dai_name	= "pcm512x-hifi",
-+	.platform_name	= "bcm2708-i2s.0",
-+	.codec_name	= "pcm512x.1-004d",
-+	.dai_fmt	= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
-+				SND_SOC_DAIFMT_CBS_CFS,
-+	.ops		= &snd_rpi_hifiberry_dacplus_ops,
-+	.init		= snd_rpi_hifiberry_dacplus_init,
-+},
-+};
-+
-+/* audio machine driver */
-+static struct snd_soc_card snd_rpi_hifiberry_dacplus = {
-+	.name         = "snd_rpi_hifiberry_dacplus",
-+	.driver_name  = "HifiberryDacp",
-+	.owner        = THIS_MODULE,
-+	.dai_link     = snd_rpi_hifiberry_dacplus_dai,
-+	.num_links    = ARRAY_SIZE(snd_rpi_hifiberry_dacplus_dai),
-+};
-+
-+static int snd_rpi_hifiberry_dacplus_probe(struct platform_device *pdev)
-+{
-+	int ret = 0;
-+
-+	snd_rpi_hifiberry_dacplus.dev = &pdev->dev;
-+	if (pdev->dev.of_node) {
-+		struct device_node *i2s_node;
-+		struct snd_soc_dai_link *dai;
-+
-+		dai = &snd_rpi_hifiberry_dacplus_dai[0];
-+		i2s_node = of_parse_phandle(pdev->dev.of_node,
-+			"i2s-controller", 0);
-+
-+		if (i2s_node) {
-+			dai->cpu_dai_name = NULL;
-+			dai->cpu_of_node = i2s_node;
-+			dai->platform_name = NULL;
-+			dai->platform_of_node = i2s_node;
-+		}
-+
-+		digital_gain_0db_limit = !of_property_read_bool(
-+			pdev->dev.of_node, "hifiberry,24db_digital_gain");
-+		slave = of_property_read_bool(pdev->dev.of_node,
-+						"hifiberry-dacplus,slave");
-+	}
-+
-+	ret = devm_snd_soc_register_card(&pdev->dev,
-+			&snd_rpi_hifiberry_dacplus);
-+	if (ret && ret != -EPROBE_DEFER)
-+		dev_err(&pdev->dev,
-+			"snd_soc_register_card() failed: %d\n", ret);
-+
-+	return ret;
-+}
-+
-+static const struct of_device_id snd_rpi_hifiberry_dacplus_of_match[] = {
-+	{ .compatible = "hifiberry,hifiberry-dacplus", },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, snd_rpi_hifiberry_dacplus_of_match);
-+
-+static struct platform_driver snd_rpi_hifiberry_dacplus_driver = {
-+	.driver = {
-+		.name   = "snd-rpi-hifiberry-dacplus",
-+		.owner  = THIS_MODULE,
-+		.of_match_table = snd_rpi_hifiberry_dacplus_of_match,
-+	},
-+	.probe          = snd_rpi_hifiberry_dacplus_probe,
-+};
-+
-+module_platform_driver(snd_rpi_hifiberry_dacplus_driver);
-+
-+MODULE_AUTHOR("Daniel Matuschek <daniel@hifiberry.com>");
-+MODULE_DESCRIPTION("ASoC Driver for HiFiBerry DAC+");
-+MODULE_LICENSE("GPL v2");

target/linux/bcm27xx/patches-4.19/950-0068-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch

@@ -1,647 +0,0 @@
-From a1344150b31e3b9592f76df8f453a15565a8390a Mon Sep 17 00:00:00 2001
-From: Daniel Matuschek <info@crazy-audio.com>
-Date: Mon, 4 Aug 2014 11:09:58 +0200
-Subject: [PATCH] Added driver for HiFiBerry Amp amplifier add-on board
-
-The driver contains a low-level hardware driver for the TAS5713 and the
-drivers for the Raspberry Pi I2S subsystem.
-
-TAS5713: return error if initialisation fails
-
-Existing TAS5713 driver logs errors during initialisation, but does not return
-an error code. Therefore even if initialisation fails, the driver will still be
-loaded, but won't work. This patch fixes this. I2C communication error will now
-reported correctly by a non-zero return code.
-
-HiFiBerry Amp: fix device-tree problems
-
-Some code to load the driver based on device-tree-overlays was missing. This is added by this patch.
----
- sound/soc/codecs/Kconfig   |   4 +
- sound/soc/codecs/Makefile  |   2 +
- sound/soc/codecs/tas5713.c | 366 +++++++++++++++++++++++++++++++++++++
- sound/soc/codecs/tas5713.h | 210 +++++++++++++++++++++
- 4 files changed, 582 insertions(+)
- create mode 100644 sound/soc/codecs/tas5713.c
- create mode 100644 sound/soc/codecs/tas5713.h
-
---- a/sound/soc/codecs/Kconfig
-+++ b/sound/soc/codecs/Kconfig
-@@ -167,6 +167,7 @@ config SND_SOC_ALL_CODECS
- 	select SND_SOC_TFA9879 if I2C
- 	select SND_SOC_TLV320AIC23_I2C if I2C
- 	select SND_SOC_TLV320AIC23_SPI if SPI_MASTER
-+	select SND_SOC_TAS5713 if I2C
- 	select SND_SOC_TLV320AIC26 if SPI_MASTER
- 	select SND_SOC_TLV320AIC31XX if I2C
- 	select SND_SOC_TLV320AIC32X4_I2C if I2C
-@@ -997,6 +998,9 @@ config SND_SOC_TFA9879
- 	tristate "NXP Semiconductors TFA9879 amplifier"
- 	depends on I2C
- 
-+config SND_SOC_TAS5713
-+	tristate
-+
- config SND_SOC_TLV320AIC23
- 	tristate
- 
---- a/sound/soc/codecs/Makefile
-+++ b/sound/soc/codecs/Makefile
-@@ -176,6 +176,7 @@ snd-soc-tas5720-objs := tas5720.o
- snd-soc-tas6424-objs := tas6424.o
- snd-soc-tda7419-objs := tda7419.o
- snd-soc-tfa9879-objs := tfa9879.o
-+snd-soc-tas5713-objs := tas5713.o
- snd-soc-tlv320aic23-objs := tlv320aic23.o
- snd-soc-tlv320aic23-i2c-objs := tlv320aic23-i2c.o
- snd-soc-tlv320aic23-spi-objs := tlv320aic23-spi.o
-@@ -436,6 +437,7 @@ obj-$(CONFIG_SND_SOC_TAS5720)	+= snd-soc
- obj-$(CONFIG_SND_SOC_TAS6424)	+= snd-soc-tas6424.o
- obj-$(CONFIG_SND_SOC_TDA7419)	+= snd-soc-tda7419.o
- obj-$(CONFIG_SND_SOC_TFA9879)	+= snd-soc-tfa9879.o
-+obj-$(CONFIG_SND_SOC_TAS5713)	+= snd-soc-tas5713.o
- obj-$(CONFIG_SND_SOC_TLV320AIC23)	+= snd-soc-tlv320aic23.o
- obj-$(CONFIG_SND_SOC_TLV320AIC23_I2C)	+= snd-soc-tlv320aic23-i2c.o
- obj-$(CONFIG_SND_SOC_TLV320AIC23_SPI)	+= snd-soc-tlv320aic23-spi.o
---- /dev/null
-+++ b/sound/soc/codecs/tas5713.c
-@@ -0,0 +1,366 @@
-+/*
-+ * ASoC Driver for TAS5713
-+ *
-+ * Author:	Sebastian Eickhoff <basti.eickhoff@googlemail.com>
-+ *		Copyright 2014
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/pm.h>
-+#include <linux/i2c.h>
-+#include <linux/of_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/regmap.h>
-+#include <linux/regulator/consumer.h>
-+#include <linux/slab.h>
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/pcm_params.h>
-+#include <sound/soc.h>
-+#include <sound/initval.h>
-+#include <sound/tlv.h>
-+
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/fs.h>
-+#include <asm/uaccess.h>
-+
-+#include "tas5713.h"
-+
-+
-+static struct i2c_client *i2c;
-+
-+struct tas5713_priv {
-+	struct regmap *regmap;
-+	int mclk_div;
-+	struct snd_soc_component *component;
-+};
-+
-+static struct tas5713_priv *priv_data;
-+
-+
-+
-+
-+/*
-+ *    _   _    ___   _      ___         _           _
-+ *   /_\ | |  / __| /_\    / __|___ _ _| |_ _ _ ___| |___
-+ *  / _ \| |__\__ \/ _ \  | (__/ _ \ ' \  _| '_/ _ \ (_-<
-+ * /_/ \_\____|___/_/ \_\  \___\___/_||_\__|_| \___/_/__/
-+ *
-+ */
-+
-+static const DECLARE_TLV_DB_SCALE(tas5713_vol_tlv, -10000, 50, 1);
-+
-+
-+static const struct snd_kcontrol_new tas5713_snd_controls[] = {
-+	SOC_SINGLE_TLV  ("Master"    , TAS5713_VOL_MASTER, 0, 248, 1, tas5713_vol_tlv),
-+	SOC_DOUBLE_R_TLV("Channels"  , TAS5713_VOL_CH1, TAS5713_VOL_CH2, 0, 248, 1, tas5713_vol_tlv)
-+};
-+
-+
-+
-+
-+/*
-+ *  __  __         _    _            ___      _
-+ * |  \/  |__ _ __| |_ (_)_ _  ___  |   \ _ _(_)_ _____ _ _
-+ * | |\/| / _` / _| ' \| | ' \/ -_) | |) | '_| \ V / -_) '_|
-+ * |_|  |_\__,_\__|_||_|_|_||_\___| |___/|_| |_|\_/\___|_|
-+ *
-+ */
-+
-+static int tas5713_hw_params(struct snd_pcm_substream *substream,
-+			    struct snd_pcm_hw_params *params,
-+			    struct snd_soc_dai *dai)
-+{
-+	u16 blen = 0x00;
-+
-+	struct snd_soc_component *component = dai->component;
-+	priv_data->component = component;
-+
-+	switch (params_format(params)) {
-+	case SNDRV_PCM_FORMAT_S16_LE:
-+		blen = 0x03;
-+		break;
-+	case SNDRV_PCM_FORMAT_S20_3LE:
-+		blen = 0x1;
-+		break;
-+	case SNDRV_PCM_FORMAT_S24_LE:
-+		blen = 0x04;
-+		break;
-+	case SNDRV_PCM_FORMAT_S32_LE:
-+		blen = 0x05;
-+		break;
-+	default:
-+		dev_err(dai->dev, "Unsupported word length: %u\n",
-+			params_format(params));
-+		return -EINVAL;
-+	}
-+
-+	// set word length
-+	snd_soc_component_update_bits(component, TAS5713_SERIAL_DATA_INTERFACE, 0x7, blen);
-+
-+	return 0;
-+}
-+
-+
-+static int tas5713_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
-+{
-+	unsigned int val = 0;
-+
-+	struct tas5713_priv *tas5713;
-+	struct snd_soc_component *component = dai->component;
-+	tas5713 = snd_soc_component_get_drvdata(component);
-+
-+	if (mute) {
-+		val = TAS5713_SOFT_MUTE_ALL;
-+	}
-+
-+	return regmap_write(tas5713->regmap, TAS5713_SOFT_MUTE, val);
-+}
-+
-+
-+static const struct snd_soc_dai_ops tas5713_dai_ops = {
-+	.hw_params 		= tas5713_hw_params,
-+	.mute_stream	= tas5713_mute_stream,
-+};
-+
-+
-+static struct snd_soc_dai_driver tas5713_dai = {
-+	.name		= "tas5713-hifi",
-+	.playback 	= {
-+		.stream_name	= "Playback",
-+		.channels_min	= 2,
-+		.channels_max	= 2,
-+		.rates		    = SNDRV_PCM_RATE_8000_48000,
-+		.formats	    = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE ),
-+	},
-+	.ops        = &tas5713_dai_ops,
-+};
-+
-+
-+
-+
-+/*
-+ *   ___         _          ___      _
-+ *  / __|___  __| |___ __  |   \ _ _(_)_ _____ _ _
-+ * | (__/ _ \/ _` / -_) _| | |) | '_| \ V / -_) '_|
-+ *  \___\___/\__,_\___\__| |___/|_| |_|\_/\___|_|
-+ *
-+ */
-+
-+static void tas5713_remove(struct snd_soc_component *component)
-+{
-+	struct tas5713_priv *tas5713;
-+
-+	tas5713 = snd_soc_component_get_drvdata(component);
-+}
-+
-+
-+static int tas5713_probe(struct snd_soc_component *component)
-+{
-+	struct tas5713_priv *tas5713;
-+	int i, ret;
-+
-+	i2c = container_of(component->dev, struct i2c_client, dev);
-+
-+	tas5713 = snd_soc_component_get_drvdata(component);
-+
-+	// Reset error
-+	ret = snd_soc_component_write(component, TAS5713_ERROR_STATUS, 0x00);
-+	if (ret < 0) return ret;
-+
-+	// Trim oscillator
-+	ret = snd_soc_component_write(component, TAS5713_OSC_TRIM, 0x00);
-+	if (ret < 0) return ret;
-+	msleep(1000);
-+
-+	// Reset error
-+	ret = snd_soc_component_write(component, TAS5713_ERROR_STATUS, 0x00);
-+	if (ret < 0) return ret;
-+
-+	// Clock mode: 44/48kHz, MCLK=64xfs
-+	ret = snd_soc_component_write(component, TAS5713_CLOCK_CTRL, 0x60);
-+	if (ret < 0) return ret;
-+
-+	// I2S 24bit
-+	ret = snd_soc_component_write(component, TAS5713_SERIAL_DATA_INTERFACE, 0x05);
-+	if (ret < 0) return ret;
-+
-+	// Unmute
-+	ret = snd_soc_component_write(component, TAS5713_SYSTEM_CTRL2, 0x00);
-+	if (ret < 0) return ret;
-+	ret = snd_soc_component_write(component, TAS5713_SOFT_MUTE, 0x00);
-+	if (ret < 0) return ret;
-+
-+	// Set volume to 0db
-+	ret = snd_soc_component_write(component, TAS5713_VOL_MASTER, 0x00);
-+	if (ret < 0) return ret;
-+
-+	// Now start programming the default initialization sequence
-+	for (i = 0; i < ARRAY_SIZE(tas5713_init_sequence); ++i) {
-+		ret = i2c_master_send(i2c,
-+				     tas5713_init_sequence[i].data,
-+				     tas5713_init_sequence[i].size);
-+		if (ret < 0) {
-+			printk(KERN_INFO "TAS5713 CODEC PROBE: InitSeq returns: %d\n", ret);
-+		}
-+	}
-+
-+	// Unmute
-+	ret = snd_soc_component_write(component, TAS5713_SYSTEM_CTRL2, 0x00);
-+	if (ret < 0) return ret;
-+
-+	return 0;
-+}
-+
-+
-+static struct snd_soc_component_driver soc_codec_dev_tas5713 = {
-+	.probe = tas5713_probe,
-+	.remove = tas5713_remove,
-+	.controls = tas5713_snd_controls,
-+	.num_controls = ARRAY_SIZE(tas5713_snd_controls),
-+};
-+
-+
-+
-+
-+/*
-+ *   ___ ___ ___   ___      _
-+ *  |_ _|_  ) __| |   \ _ _(_)_ _____ _ _
-+ *   | | / / (__  | |) | '_| \ V / -_) '_|
-+ *  |___/___\___| |___/|_| |_|\_/\___|_|
-+ *
-+ */
-+
-+static const struct reg_default tas5713_reg_defaults[] = {
-+	{ 0x07 ,0x80 },     // R7  - VOL_MASTER    - -40dB
-+	{ 0x08 ,  30 },     // R8  - VOL_CH1	   -   0dB
-+	{ 0x09 ,  30 },     // R9  - VOL_CH2       -   0dB
-+	{ 0x0A ,0x80 },     // R10 - VOL_HEADPHONE - -40dB
-+};
-+
-+
-+static bool tas5713_reg_volatile(struct device *dev, unsigned int reg)
-+{
-+	switch (reg) {
-+		case TAS5713_DEVICE_ID:
-+		case TAS5713_ERROR_STATUS:
-+			return true;
-+	default:
-+			return false;
-+	}
-+}
-+
-+
-+static const struct of_device_id tas5713_of_match[] = {
-+	{ .compatible = "ti,tas5713", },
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(of, tas5713_of_match);
-+
-+
-+static struct regmap_config tas5713_regmap_config = {
-+	.reg_bits = 8,
-+	.val_bits = 8,
-+
-+	.max_register = TAS5713_MAX_REGISTER,
-+	.volatile_reg = tas5713_reg_volatile,
-+
-+	.cache_type = REGCACHE_RBTREE,
-+	.reg_defaults = tas5713_reg_defaults,
-+	.num_reg_defaults = ARRAY_SIZE(tas5713_reg_defaults),
-+};
-+
-+
-+static int tas5713_i2c_probe(struct i2c_client *i2c,
-+			    const struct i2c_device_id *id)
-+{
-+	int ret;
-+
-+	priv_data = devm_kzalloc(&i2c->dev, sizeof *priv_data, GFP_KERNEL);
-+	if (!priv_data)
-+		return -ENOMEM;
-+
-+	priv_data->regmap = devm_regmap_init_i2c(i2c, &tas5713_regmap_config);
-+	if (IS_ERR(priv_data->regmap)) {
-+		ret = PTR_ERR(priv_data->regmap);
-+		return ret;
-+	}
-+
-+	i2c_set_clientdata(i2c, priv_data);
-+
-+	ret = snd_soc_register_component(&i2c->dev,
-+				     &soc_codec_dev_tas5713, &tas5713_dai, 1);
-+
-+	return ret;
-+}
-+
-+
-+static int tas5713_i2c_remove(struct i2c_client *i2c)
-+{
-+	snd_soc_unregister_component(&i2c->dev);
-+	i2c_set_clientdata(i2c, NULL);
-+
-+	kfree(priv_data);
-+
-+	return 0;
-+}
-+
-+
-+static const struct i2c_device_id tas5713_i2c_id[] = {
-+	{ "tas5713", 0 },
-+	{ }
-+};
-+
-+MODULE_DEVICE_TABLE(i2c, tas5713_i2c_id);
-+
-+
-+static struct i2c_driver tas5713_i2c_driver = {
-+	.driver = {
-+		.name = "tas5713",
-+		.owner = THIS_MODULE,
-+		.of_match_table = tas5713_of_match,
-+	},
-+	.probe = tas5713_i2c_probe,
-+	.remove = tas5713_i2c_remove,
-+	.id_table = tas5713_i2c_id
-+};
-+
-+
-+static int __init tas5713_modinit(void)
-+{
-+	int ret = 0;
-+
-+	ret = i2c_add_driver(&tas5713_i2c_driver);
-+	if (ret) {
-+		printk(KERN_ERR "Failed to register tas5713 I2C driver: %d\n",
-+		       ret);
-+	}
-+
-+	return ret;
-+}
-+module_init(tas5713_modinit);
-+
-+
-+static void __exit tas5713_exit(void)
-+{
-+	i2c_del_driver(&tas5713_i2c_driver);
-+}
-+module_exit(tas5713_exit);
-+
-+
-+MODULE_AUTHOR("Sebastian Eickhoff <basti.eickhoff@googlemail.com>");
-+MODULE_DESCRIPTION("ASoC driver for TAS5713");
-+MODULE_LICENSE("GPL v2");
---- /dev/null
-+++ b/sound/soc/codecs/tas5713.h
-@@ -0,0 +1,210 @@
-+/*
-+ * ASoC Driver for TAS5713
-+ *
-+ * Author:      Sebastian Eickhoff <basti.eickhoff@googlemail.com>
-+ *              Copyright 2014
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ */
-+
-+#ifndef _TAS5713_H
-+#define _TAS5713_H
-+
-+
-+// TAS5713 I2C-bus register addresses
-+
-+#define TAS5713_CLOCK_CTRL              0x00
-+#define TAS5713_DEVICE_ID               0x01
-+#define TAS5713_ERROR_STATUS            0x02
-+#define TAS5713_SYSTEM_CTRL1            0x03
-+#define TAS5713_SERIAL_DATA_INTERFACE   0x04
-+#define TAS5713_SYSTEM_CTRL2            0x05
-+#define TAS5713_SOFT_MUTE               0x06
-+#define TAS5713_VOL_MASTER              0x07
-+#define TAS5713_VOL_CH1                 0x08
-+#define TAS5713_VOL_CH2                 0x09
-+#define TAS5713_VOL_HEADPHONE           0x0A
-+#define TAS5713_VOL_CONFIG              0x0E
-+#define TAS5713_MODULATION_LIMIT        0x10
-+#define TAS5713_IC_DLY_CH1              0x11
-+#define TAS5713_IC_DLY_CH2              0x12
-+#define TAS5713_IC_DLY_CH3              0x13
-+#define TAS5713_IC_DLY_CH4              0x14
-+
-+#define TAS5713_START_STOP_PERIOD       0x1A
-+#define TAS5713_OSC_TRIM                0x1B
-+#define TAS5713_BKND_ERR                0x1C
-+
-+#define TAS5713_INPUT_MUX               0x20
-+#define TAS5713_SRC_SELECT_CH4          0x21
-+#define TAS5713_PWM_MUX                 0x25
-+
-+#define TAS5713_CH1_BQ0                 0x29
-+#define TAS5713_CH1_BQ1                 0x2A
-+#define TAS5713_CH1_BQ2                 0x2B
-+#define TAS5713_CH1_BQ3                 0x2C
-+#define TAS5713_CH1_BQ4                 0x2D
-+#define TAS5713_CH1_BQ5                 0x2E
-+#define TAS5713_CH1_BQ6                 0x2F
-+#define TAS5713_CH1_BQ7                 0x58
-+#define TAS5713_CH1_BQ8                 0x59
-+
-+#define TAS5713_CH2_BQ0                 0x30
-+#define TAS5713_CH2_BQ1                 0x31
-+#define TAS5713_CH2_BQ2                 0x32
-+#define TAS5713_CH2_BQ3                 0x33
-+#define TAS5713_CH2_BQ4                 0x34
-+#define TAS5713_CH2_BQ5                 0x35
-+#define TAS5713_CH2_BQ6                 0x36
-+#define TAS5713_CH2_BQ7                 0x5C
-+#define TAS5713_CH2_BQ8                 0x5D
-+
-+#define TAS5713_CH4_BQ0                 0x5A
-+#define TAS5713_CH4_BQ1                 0x5B
-+#define TAS5713_CH3_BQ0                 0x5E
-+#define TAS5713_CH3_BQ1                 0x5F
-+
-+#define TAS5713_DRC1_SOFTENING_FILTER_ALPHA_OMEGA       0x3B
-+#define TAS5713_DRC1_ATTACK_RELEASE_RATE                0x3C
-+#define TAS5713_DRC2_SOFTENING_FILTER_ALPHA_OMEGA       0x3E
-+#define TAS5713_DRC2_ATTACK_RELEASE_RATE                0x3F
-+#define TAS5713_DRC1_ATTACK_RELEASE_THRES               0x40
-+#define TAS5713_DRC2_ATTACK_RELEASE_THRES               0x43
-+#define TAS5713_DRC_CTRL                                0x46
-+
-+#define TAS5713_BANK_SW_CTRL            0x50
-+#define TAS5713_CH1_OUTPUT_MIXER        0x51
-+#define TAS5713_CH2_OUTPUT_MIXER        0x52
-+#define TAS5713_CH1_INPUT_MIXER         0x53
-+#define TAS5713_CH2_INPUT_MIXER         0x54
-+#define TAS5713_OUTPUT_POST_SCALE       0x56
-+#define TAS5713_OUTPUT_PRESCALE         0x57
-+
-+#define TAS5713_IDF_POST_SCALE          0x62
-+
-+#define TAS5713_CH1_INLINE_MIXER        0x70
-+#define TAS5713_CH1_INLINE_DRC_EN_MIXER 0x71
-+#define TAS5713_CH1_R_CHANNEL_MIXER     0x72
-+#define TAS5713_CH1_L_CHANNEL_MIXER     0x73
-+#define TAS5713_CH2_INLINE_MIXER        0x74
-+#define TAS5713_CH2_INLINE_DRC_EN_MIXER 0x75
-+#define TAS5713_CH2_L_CHANNEL_MIXER     0x76
-+#define TAS5713_CH2_R_CHANNEL_MIXER     0x77
-+
-+#define TAS5713_UPDATE_DEV_ADDR_KEY     0xF8
-+#define TAS5713_UPDATE_DEV_ADDR_REG     0xF9
-+
-+#define TAS5713_REGISTER_COUNT          0x46
-+#define TAS5713_MAX_REGISTER            0xF9
-+
-+
-+// Bitmasks for registers
-+#define TAS5713_SOFT_MUTE_ALL           0x07
-+
-+
-+
-+struct tas5713_init_command {
-+        const int size;
-+        const char *const data;
-+};
-+
-+static const struct tas5713_init_command tas5713_init_sequence[] = {
-+
-+        // Trim oscillator
-+    { .size = 2,  .data = "\x1B\x00" },
-+    // System control register 1 (0x03): block DC
-+    { .size = 2,  .data = "\x03\x80" },
-+    // Mute everything
-+    { .size = 2,  .data = "\x05\x40" },
-+    // Modulation limit register (0x10): 97.7%
-+    { .size = 2,  .data = "\x10\x02" },
-+    // Interchannel delay registers
-+    // (0x11, 0x12, 0x13, and 0x14): BD mode
-+    { .size = 2,  .data = "\x11\xB8" },
-+    { .size = 2,  .data = "\x12\x60" },
-+    { .size = 2,  .data = "\x13\xA0" },
-+    { .size = 2,  .data = "\x14\x48" },
-+    // PWM shutdown group register (0x19): no shutdown
-+    { .size = 2,  .data = "\x19\x00" },
-+    // Input multiplexer register (0x20): BD mode
-+    { .size = 2,  .data = "\x20\x00\x89\x77\x72" },
-+    // PWM output mux register (0x25)
-+    // Channel 1 --> OUTA, channel 1 neg --> OUTB
-+    // Channel 2 --> OUTC, channel 2 neg --> OUTD
-+    { .size = 5,  .data = "\x25\x01\x02\x13\x45" },
-+    // DRC control (0x46): DRC off
-+    { .size = 5,  .data = "\x46\x00\x00\x00\x00" },
-+    // BKND_ERR register (0x1C): 299ms reset period
-+    { .size = 2,  .data = "\x1C\x07" },
-+    // Mute channel 3
-+    { .size = 2,  .data = "\x0A\xFF" },
-+    // Volume configuration register (0x0E): volume slew 512 steps
-+    { .size = 2,  .data = "\x0E\x90" },
-+    // Clock control register (0x00): 44/48kHz, MCLK=64xfs
-+    { .size = 2,  .data = "\x00\x60" },
-+    // Bank switch and eq control (0x50): no bank switching
-+    { .size = 5,  .data = "\x50\x00\x00\x00\x00" },
-+    // Volume registers (0x07, 0x08, 0x09, 0x0A)
-+    { .size = 2,  .data = "\x07\x20" },
-+    { .size = 2,  .data = "\x08\x30" },
-+    { .size = 2,  .data = "\x09\x30" },
-+    { .size = 2,  .data = "\x0A\xFF" },
-+    // 0x72, 0x73, 0x76, 0x77 input mixer:
-+    // no intermix between channels
-+    { .size = 5,  .data = "\x72\x00\x00\x00\x00" },
-+    { .size = 5,  .data = "\x73\x00\x80\x00\x00" },
-+    { .size = 5,  .data = "\x76\x00\x00\x00\x00" },
-+    { .size = 5,  .data = "\x77\x00\x80\x00\x00" },
-+    // 0x70, 0x71, 0x74, 0x75 inline DRC mixer:
-+    // no inline DRC inmix
-+    { .size = 5,  .data = "\x70\x00\x80\x00\x00" },
-+    { .size = 5,  .data = "\x71\x00\x00\x00\x00" },
-+    { .size = 5,  .data = "\x74\x00\x80\x00\x00" },
-+    { .size = 5,  .data = "\x75\x00\x00\x00\x00" },
-+    // 0x56, 0x57 Output scale
-+    { .size = 5,  .data = "\x56\x00\x80\x00\x00" },
-+    { .size = 5,  .data = "\x57\x00\x02\x00\x00" },
-+    // 0x3B, 0x3c
-+    { .size = 9,  .data = "\x3B\x00\x08\x00\x00\x00\x78\x00\x00" },
-+    { .size = 9,  .data = "\x3C\x00\x00\x01\x00\xFF\xFF\xFF\x00" },
-+    { .size = 9,  .data = "\x3E\x00\x08\x00\x00\x00\x78\x00\x00" },
-+    { .size = 9,  .data = "\x3F\x00\x00\x01\x00\xFF\xFF\xFF\x00" },
-+    { .size = 9,  .data = "\x40\x00\x00\x01\x00\xFF\xFF\xFF\x00" },
-+    { .size = 9,  .data = "\x43\x00\x00\x01\x00\xFF\xFF\xFF\x00" },
-+    // 0x51, 0x52: output mixer
-+    { .size = 9,  .data = "\x51\x00\x80\x00\x00\x00\x00\x00\x00" },
-+    { .size = 9,  .data = "\x52\x00\x80\x00\x00\x00\x00\x00\x00" },
-+    // PEQ defaults
-+    { .size = 21,  .data = "\x29\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+    { .size = 21,  .data = "\x2A\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+    { .size = 21,  .data = "\x2B\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+    { .size = 21,  .data = "\x2C\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+    { .size = 21,  .data = "\x2D\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+    { .size = 21,  .data = "\x2E\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+    { .size = 21,  .data = "\x2F\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+    { .size = 21,  .data = "\x30\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+    { .size = 21,  .data = "\x31\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+    { .size = 21,  .data = "\x32\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+    { .size = 21,  .data = "\x33\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+    { .size = 21,  .data = "\x34\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+    { .size = 21,  .data = "\x35\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+    { .size = 21,  .data = "\x36\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+    { .size = 21,  .data = "\x58\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+    { .size = 21,  .data = "\x59\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+    { .size = 21,  .data = "\x5C\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+    { .size = 21,  .data = "\x5D\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+    { .size = 21,  .data = "\x5E\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+    { .size = 21,  .data = "\x5F\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+    { .size = 21,  .data = "\x5A\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+    { .size = 21,  .data = "\x5B\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" },
-+};
-+
-+
-+#endif  /* _TAS5713_H */

target/linux/bcm27xx/patches-4.19/950-0069-Add-driver-for-rpi-proto.patch

@@ -1,168 +0,0 @@
-From bf4dee727fc7c72e250784e8e3e681f9d11bbdc1 Mon Sep 17 00:00:00 2001
-From: Waldemar Brodkorb <wbrodkorb@conet.de>
-Date: Wed, 25 Mar 2015 09:26:17 +0100
-Subject: [PATCH] Add driver for rpi-proto
-
-Forward port of 3.10.x driver from https://github.com/koalo
-We are using a custom board and would like to use rpi 3.18.x
-kernel. Patch works fine for our embedded system.
-
-URL to the audio chip:
-http://www.mikroe.com/add-on-boards/audio-voice/audio-codec-proto/
-
-Playback tested with devicetree enabled.
-
-Signed-off-by: Waldemar Brodkorb <wbrodkorb@conet.de>
----
- sound/soc/bcm/rpi-proto.c | 145 ++++++++++++++++++++++++++++++++++++++
- 1 file changed, 145 insertions(+)
- create mode 100644 sound/soc/bcm/rpi-proto.c
-
---- /dev/null
-+++ b/sound/soc/bcm/rpi-proto.c
-@@ -0,0 +1,145 @@
-+/*
-+ * ASoC driver for PROTO AudioCODEC (with a WM8731)
-+ * connected to a Raspberry Pi
-+ *
-+ * Author:      Florian Meier, <koalo@koalo.de>
-+ *	      Copyright 2013
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/soc.h>
-+#include <sound/jack.h>
-+
-+#include "../codecs/wm8731.h"
-+
-+static const unsigned int wm8731_rates_12288000[] = {
-+	8000, 32000, 48000, 96000,
-+};
-+
-+static struct snd_pcm_hw_constraint_list wm8731_constraints_12288000 = {
-+	.list = wm8731_rates_12288000,
-+	.count = ARRAY_SIZE(wm8731_rates_12288000),
-+};
-+
-+static int snd_rpi_proto_startup(struct snd_pcm_substream *substream)
-+{
-+	/* Setup constraints, because there is a 12.288 MHz XTAL on the board */
-+	snd_pcm_hw_constraint_list(substream->runtime, 0,
-+				SNDRV_PCM_HW_PARAM_RATE,
-+				&wm8731_constraints_12288000);
-+	return 0;
-+}
-+
-+static int snd_rpi_proto_hw_params(struct snd_pcm_substream *substream,
-+				       struct snd_pcm_hw_params *params)
-+{
-+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-+	int sysclk = 12288000; /* This is fixed on this board */
-+
-+	/* Set proto bclk */
-+	int ret = snd_soc_dai_set_bclk_ratio(cpu_dai,32*2);
-+	if (ret < 0){
-+		dev_err(rtd->card->dev,
-+				"Failed to set BCLK ratio %d\n", ret);
-+		return ret;
-+	}
-+
-+	/* Set proto sysclk */
-+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_XTAL,
-+			sysclk, SND_SOC_CLOCK_IN);
-+	if (ret < 0) {
-+		dev_err(rtd->card->dev,
-+				"Failed to set WM8731 SYSCLK: %d\n", ret);
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+/* machine stream operations */
-+static struct snd_soc_ops snd_rpi_proto_ops = {
-+	.startup = snd_rpi_proto_startup,
-+	.hw_params = snd_rpi_proto_hw_params,
-+};
-+
-+static struct snd_soc_dai_link snd_rpi_proto_dai[] = {
-+{
-+	.name		= "WM8731",
-+	.stream_name	= "WM8731 HiFi",
-+	.cpu_dai_name	= "bcm2708-i2s.0",
-+	.codec_dai_name	= "wm8731-hifi",
-+	.platform_name	= "bcm2708-i2s.0",
-+	.codec_name	= "wm8731.1-001a",
-+	.dai_fmt	= SND_SOC_DAIFMT_I2S
-+				| SND_SOC_DAIFMT_NB_NF
-+				| SND_SOC_DAIFMT_CBM_CFM,
-+	.ops		= &snd_rpi_proto_ops,
-+},
-+};
-+
-+/* audio machine driver */
-+static struct snd_soc_card snd_rpi_proto = {
-+	.name		= "snd_rpi_proto",
-+	.owner		= THIS_MODULE,
-+	.dai_link	= snd_rpi_proto_dai,
-+	.num_links	= ARRAY_SIZE(snd_rpi_proto_dai),
-+};
-+
-+static int snd_rpi_proto_probe(struct platform_device *pdev)
-+{
-+	int ret = 0;
-+
-+	snd_rpi_proto.dev = &pdev->dev;
-+
-+	if (pdev->dev.of_node) {
-+		struct device_node *i2s_node;
-+		struct snd_soc_dai_link *dai = &snd_rpi_proto_dai[0];
-+		i2s_node = of_parse_phandle(pdev->dev.of_node,
-+				            "i2s-controller", 0);
-+
-+		if (i2s_node) {
-+			dai->cpu_dai_name = NULL;
-+			dai->cpu_of_node = i2s_node;
-+			dai->platform_name = NULL;
-+			dai->platform_of_node = i2s_node;
-+		}
-+	}
-+
-+	ret = devm_snd_soc_register_card(&pdev->dev, &snd_rpi_proto);
-+	if (ret && ret != -EPROBE_DEFER)
-+		dev_err(&pdev->dev,
-+				"snd_soc_register_card() failed: %d\n", ret);
-+
-+	return ret;
-+}
-+
-+static const struct of_device_id snd_rpi_proto_of_match[] = {
-+	{ .compatible = "rpi,rpi-proto", },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, snd_rpi_proto_of_match);
-+
-+static struct platform_driver snd_rpi_proto_driver = {
-+	.driver = {
-+		.name   = "snd-rpi-proto",
-+		.owner  = THIS_MODULE,
-+		.of_match_table = snd_rpi_proto_of_match,
-+	},
-+	.probe	  = snd_rpi_proto_probe,
-+};
-+
-+module_platform_driver(snd_rpi_proto_driver);
-+
-+MODULE_AUTHOR("Florian Meier");
-+MODULE_DESCRIPTION("ASoC Driver for Raspberry Pi connected to PROTO board (WM8731)");
-+MODULE_LICENSE("GPL");