diff --git a/target/linux/generic/backport-5.10/401-v5.11-dt-bindings-mtd-convert-fixed-partitions-to-the-json.patch b/target/linux/generic/backport-5.10/401-v5.11-dt-bindings-mtd-convert-fixed-partitions-to-the-json.patch new file mode 100644 index 0000000000..8aded43526 --- /dev/null +++ b/target/linux/generic/backport-5.10/401-v5.11-dt-bindings-mtd-convert-fixed-partitions-to-the-json.patch @@ -0,0 +1,324 @@ +From 04e9ab75267489224364fa510a88ada83e11c325 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Thu, 10 Dec 2020 18:23:52 +0100 +Subject: [PATCH] dt-bindings: mtd: convert "fixed-partitions" to the + json-schema +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This standardizes its documentation, allows validating with Makefile +checks and helps writing DTS files. + +Noticeable changes: +1. Dropped "Partitions can be represented by sub-nodes of a flash + device." as we also support subpartitions (don't have to be part of + flash device node) +2. Dropped "to Linux" as bindings are meant to be os agnostic. + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20201210172352.31632-1-zajec5@gmail.com +Signed-off-by: Rob Herring +--- + .../devicetree/bindings/mtd/partition.txt | 131 +-------------- + .../mtd/partitions/fixed-partitions.yaml | 152 ++++++++++++++++++ + 2 files changed, 154 insertions(+), 129 deletions(-) + create mode 100644 Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml + +--- a/Documentation/devicetree/bindings/mtd/partition.txt ++++ b/Documentation/devicetree/bindings/mtd/partition.txt +@@ -24,137 +24,10 @@ another partitioning method. + Available bindings are listed in the "partitions" subdirectory. + + +-Fixed Partitions +-================ +- +-Partitions can be represented by sub-nodes of a flash device. This can be used +-on platforms which have strong conventions about which portions of a flash are +-used for what purposes, but which don't use an on-flash partition table such +-as RedBoot. +- +-The partition table should be a subnode of the flash node and should be named +-'partitions'. This node should have the following property: +-- compatible : (required) must be "fixed-partitions" +-Partitions are then defined in subnodes of the partitions node. ++Deprecated: partitions defined in flash node ++============================================ + + For backwards compatibility partitions as direct subnodes of the flash device are + supported. This use is discouraged. + NOTE: also for backwards compatibility, direct subnodes that have a compatible + string are not considered partitions, as they may be used for other bindings. +- +-#address-cells & #size-cells must both be present in the partitions subnode of the +-flash device. There are two valid values for both: +-<1>: for partitions that require a single 32-bit cell to represent their +- size/address (aka the value is below 4 GiB) +-<2>: for partitions that require two 32-bit cells to represent their +- size/address (aka the value is 4 GiB or greater). +- +-Required properties: +-- reg : The partition's offset and size within the flash +- +-Optional properties: +-- label : The label / name for this partition. If omitted, the label is taken +- from the node name (excluding the unit address). +-- read-only : This parameter, if present, is a hint to Linux that this +- partition should only be mounted read-only. This is usually used for flash +- partitions containing early-boot firmware images or data which should not be +- clobbered. +-- lock : Do not unlock the partition at initialization time (not supported on +- all devices) +-- slc-mode: This parameter, if present, allows one to emulate SLC mode on a +- partition attached to an MLC NAND thus making this partition immune to +- paired-pages corruptions +- +-Examples: +- +- +-flash@0 { +- partitions { +- compatible = "fixed-partitions"; +- #address-cells = <1>; +- #size-cells = <1>; +- +- partition@0 { +- label = "u-boot"; +- reg = <0x0000000 0x100000>; +- read-only; +- }; +- +- uimage@100000 { +- reg = <0x0100000 0x200000>; +- }; +- }; +-}; +- +-flash@1 { +- partitions { +- compatible = "fixed-partitions"; +- #address-cells = <1>; +- #size-cells = <2>; +- +- /* a 4 GiB partition */ +- partition@0 { +- label = "filesystem"; +- reg = <0x00000000 0x1 0x00000000>; +- }; +- }; +-}; +- +-flash@2 { +- partitions { +- compatible = "fixed-partitions"; +- #address-cells = <2>; +- #size-cells = <2>; +- +- /* an 8 GiB partition */ +- partition@0 { +- label = "filesystem #1"; +- reg = <0x0 0x00000000 0x2 0x00000000>; +- }; +- +- /* a 4 GiB partition */ +- partition@200000000 { +- label = "filesystem #2"; +- reg = <0x2 0x00000000 0x1 0x00000000>; +- }; +- }; +-}; +- +-flash@3 { +- partitions { +- compatible = "fixed-partitions"; +- #address-cells = <1>; +- #size-cells = <1>; +- +- partition@0 { +- label = "bootloader"; +- reg = <0x000000 0x100000>; +- read-only; +- }; +- +- firmware@100000 { +- label = "firmware"; +- reg = <0x100000 0xe00000>; +- compatible = "brcm,trx"; +- }; +- +- calibration@f00000 { +- label = "calibration"; +- reg = <0xf00000 0x100000>; +- compatible = "fixed-partitions"; +- ranges = <0 0xf00000 0x100000>; +- #address-cells = <1>; +- #size-cells = <1>; +- +- partition@0 { +- label = "wifi0"; +- reg = <0x000000 0x080000>; +- }; +- +- partition@80000 { +- label = "wifi1"; +- reg = <0x080000 0x080000>; +- }; +- }; +- }; +-}; +--- /dev/null ++++ b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml +@@ -0,0 +1,152 @@ ++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/mtd/partitions/fixed-partitions.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Fixed partitions ++ ++description: | ++ This binding can be used on platforms which have strong conventions about ++ which portions of a flash are used for what purposes, but which don't use an ++ on-flash partition table such as RedBoot. ++ ++ The partition table should be a node named "partitions". Partitions are then ++ defined as subnodes. ++ ++maintainers: ++ - Rafał Miłecki ++ ++properties: ++ compatible: ++ const: fixed-partitions ++ ++ "#address-cells": true ++ ++ "#size-cells": true ++ ++patternProperties: ++ "@[0-9a-f]+$": ++ description: node describing a single flash partition ++ type: object ++ ++ properties: ++ reg: ++ description: partition's offset and size within the flash ++ maxItems: 1 ++ ++ label: ++ description: The label / name for this partition. If omitted, the label ++ is taken from the node name (excluding the unit address). ++ ++ read-only: ++ description: This parameter, if present, is a hint that this partition ++ should only be mounted read-only. This is usually used for flash ++ partitions containing early-boot firmware images or data which should ++ not be clobbered. ++ type: boolean ++ ++ lock: ++ description: Do not unlock the partition at initialization time (not ++ supported on all devices) ++ type: boolean ++ ++ slc-mode: ++ description: This parameter, if present, allows one to emulate SLC mode ++ on a partition attached to an MLC NAND thus making this partition ++ immune to paired-pages corruptions ++ type: boolean ++ ++ required: ++ - reg ++ ++required: ++ - "#address-cells" ++ - "#size-cells" ++ ++additionalProperties: true ++ ++examples: ++ - | ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "u-boot"; ++ reg = <0x0000000 0x100000>; ++ read-only; ++ }; ++ ++ uimage@100000 { ++ reg = <0x0100000 0x200000>; ++ }; ++ }; ++ - | ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <2>; ++ ++ /* a 4 GiB partition */ ++ partition@0 { ++ label = "filesystem"; ++ reg = <0x00000000 0x1 0x00000000>; ++ }; ++ }; ++ - | ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ++ /* an 8 GiB partition */ ++ partition@0 { ++ label = "filesystem #1"; ++ reg = <0x0 0x00000000 0x2 0x00000000>; ++ }; ++ ++ /* a 4 GiB partition */ ++ partition@200000000 { ++ label = "filesystem #2"; ++ reg = <0x2 0x00000000 0x1 0x00000000>; ++ }; ++ }; ++ - | ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "bootloader"; ++ reg = <0x000000 0x100000>; ++ read-only; ++ }; ++ ++ firmware@100000 { ++ compatible = "brcm,trx"; ++ label = "firmware"; ++ reg = <0x100000 0xe00000>; ++ }; ++ ++ calibration@f00000 { ++ compatible = "fixed-partitions"; ++ label = "calibration"; ++ reg = <0xf00000 0x100000>; ++ ranges = <0 0xf00000 0x100000>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "wifi0"; ++ reg = <0x000000 0x080000>; ++ }; ++ ++ partition@80000 { ++ label = "wifi1"; ++ reg = <0x080000 0x080000>; ++ }; ++ }; ++ }; diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.c b/target/linux/generic/files/drivers/net/phy/ar8216.c index acfa0ebecd..ef0fc54949 100644 --- a/target/linux/generic/files/drivers/net/phy/ar8216.c +++ b/target/linux/generic/files/drivers/net/phy/ar8216.c @@ -891,7 +891,11 @@ ar8216_phy_write(struct ar8xxx_priv *priv, int addr, int regnum, u16 val) static int ar8229_hw_init(struct ar8xxx_priv *priv) { +#if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 5, 0) + phy_interface_t phy_if_mode; +#else int phy_if_mode; +#endif if (priv->initialized) return 0; @@ -899,7 +903,11 @@ ar8229_hw_init(struct ar8xxx_priv *priv) ar8xxx_write(priv, AR8216_REG_CTRL, AR8216_CTRL_RESET); ar8xxx_reg_wait(priv, AR8216_REG_CTRL, AR8216_CTRL_RESET, 0, 1000); +#if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 5, 0) + of_get_phy_mode(priv->pdev->of_node, &phy_if_mode); +#else phy_if_mode = of_get_phy_mode(priv->pdev->of_node); +#endif if (phy_if_mode == PHY_INTERFACE_MODE_GMII) { ar8xxx_write(priv, AR8229_REG_OPER_MODE0, diff --git a/target/linux/generic/hack-5.10/249-udp-tunnel-selection.patch b/target/linux/generic/hack-5.10/249-udp-tunnel-selection.patch new file mode 100644 index 0000000000..2c74298dfe --- /dev/null +++ b/target/linux/generic/hack-5.10/249-udp-tunnel-selection.patch @@ -0,0 +1,11 @@ +--- a/net/ipv4/Kconfig ++++ b/net/ipv4/Kconfig +@@ -315,7 +315,7 @@ config NET_IPVTI + on top. + + config NET_UDP_TUNNEL +- tristate ++ tristate "IP: UDP tunneling support" + select NET_IP_TUNNEL + default n + diff --git a/target/linux/generic/hack-5.10/531-debloat_lzma.patch b/target/linux/generic/hack-5.10/531-debloat_lzma.patch index 0854872ffa..2f70eee3e9 100644 --- a/target/linux/generic/hack-5.10/531-debloat_lzma.patch +++ b/target/linux/generic/hack-5.10/531-debloat_lzma.patch @@ -710,26 +710,26 @@ Signed-off-by: Felix Fietkau { UInt32 dicSize; Byte d; -@@ -935,33 +883,11 @@ static SRes LzmaDec_AllocateProbs2(CLzma +@@ -935,7 +883,7 @@ static SRes LzmaDec_AllocateProbs2(CLzma return SZ_OK; } -SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc) --{ -- CLzmaProps propNew; -- RINOK(LzmaProps_Decode(&propNew, props, propsSize)); -- RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc)); -- p->prop = propNew; -- return SZ_OK; --} -- --SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc) +static SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc) { CLzmaProps propNew; -- SizeT dicBufSize; RINOK(LzmaProps_Decode(&propNew, props, propsSize)); - RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc)); +@@ -943,28 +891,6 @@ SRes LzmaDec_AllocateProbs(CLzmaDec *p, + p->prop = propNew; + return SZ_OK; + } +- +-SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc) +-{ +- CLzmaProps propNew; +- SizeT dicBufSize; +- RINOK(LzmaProps_Decode(&propNew, props, propsSize)); +- RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc)); - dicBufSize = propNew.dicSize; - if (p->dic == 0 || dicBufSize != p->dicBufSize) - { @@ -742,9 +742,12 @@ Signed-off-by: Felix Fietkau - } - } - p->dicBufSize = dicBufSize; - p->prop = propNew; - return SZ_OK; - } +- p->prop = propNew; +- return SZ_OK; +-} + + SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, + const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode, --- a/lib/lzma/LzmaEnc.c +++ b/lib/lzma/LzmaEnc.c @@ -53,7 +53,7 @@ void LzmaEncProps_Init(CLzmaEncProps *p) diff --git a/target/linux/generic/hack-5.10/998-add-ndo-do-ioctl.patch b/target/linux/generic/hack-5.10/998-add-ndo-do-ioctl.patch index 9cbfc6a1d3..43e3e628a4 100644 --- a/target/linux/generic/hack-5.10/998-add-ndo-do-ioctl.patch +++ b/target/linux/generic/hack-5.10/998-add-ndo-do-ioctl.patch @@ -10,4 +10,5 @@ index 6cdb0544..7d1e09e3 100644 + if (dev->netdev_ops->ndo_do_ioctl) + return dev->netdev_ops->ndo_do_ioctl(dev, (struct ifreq *) iwr, cmd); return -EOPNOTSUPP; - } \ No newline at end of file + } + diff --git a/target/linux/generic/hack-5.4/998-add-ndo-do-ioctl.patch b/target/linux/generic/hack-5.4/998-add-ndo-do-ioctl.patch index 9cbfc6a1d3..43e3e628a4 100644 --- a/target/linux/generic/hack-5.4/998-add-ndo-do-ioctl.patch +++ b/target/linux/generic/hack-5.4/998-add-ndo-do-ioctl.patch @@ -10,4 +10,5 @@ index 6cdb0544..7d1e09e3 100644 + if (dev->netdev_ops->ndo_do_ioctl) + return dev->netdev_ops->ndo_do_ioctl(dev, (struct ifreq *) iwr, cmd); return -EOPNOTSUPP; - } \ No newline at end of file + } + diff --git a/target/linux/generic/pending-5.10/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch b/target/linux/generic/pending-5.10/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch index 5a0e44b76b..2808c95322 100644 --- a/target/linux/generic/pending-5.10/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch +++ b/target/linux/generic/pending-5.10/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch @@ -267,15 +267,15 @@ Signed-off-by: Yousong Zhou + EXPORT(kexec_argv_buf) + .skip KEXEC_COMMAND_LINE_SIZE + .size kexec_argv_buf, KEXEC_COMMAND_LINE_SIZE ++ ++kexec_argv: ++ EXPORT(kexec_argv) ++ .skip KEXEC_ARGV_SIZE ++ .size kexec_argv, KEXEC_ARGV_SIZE -relocate_new_kernel_size: - EXPORT(relocate_new_kernel_size) - PTR relocate_new_kernel_end - relocate_new_kernel - .size relocate_new_kernel_size, PTRSIZE -+kexec_argv: -+ EXPORT(kexec_argv) -+ .skip KEXEC_ARGV_SIZE -+ .size kexec_argv, KEXEC_ARGV_SIZE -+ +kexec_relocate_new_kernel_end: + EXPORT(kexec_relocate_new_kernel_end) diff --git a/target/linux/generic/pending-5.10/640-11-netfilter-flowtable-add-offload-support-for-xmit-pat.patch b/target/linux/generic/pending-5.10/640-11-netfilter-flowtable-add-offload-support-for-xmit-pat.patch index 5e3c7e031a..508dc90e14 100644 --- a/target/linux/generic/pending-5.10/640-11-netfilter-flowtable-add-offload-support-for-xmit-pat.patch +++ b/target/linux/generic/pending-5.10/640-11-netfilter-flowtable-add-offload-support-for-xmit-pat.patch @@ -85,12 +85,14 @@ tag to the driver. - n = dst_neigh_lookup(dst_cache, daddr); - if (!n) - return -ENOENT; -+ this_tuple = &flow->tuplehash[dir].tuple; - +- - read_lock_bh(&n->lock); - nud_state = n->nud_state; - ether_addr_copy(ha, n->ha); - read_unlock_bh(&n->lock); ++ this_tuple = &flow->tuplehash[dir].tuple; + +- if (!(nud_state & NUD_VALID)) { + switch (this_tuple->xmit_type) { + case FLOW_OFFLOAD_XMIT_DIRECT: + ether_addr_copy(ha, this_tuple->out.h_dest); @@ -102,8 +104,7 @@ tag to the driver. + n = dst_neigh_lookup(dst_cache, daddr); + if (!n) + return -ENOENT; - -- if (!(nud_state & NUD_VALID)) { ++ + read_lock_bh(&n->lock); + nud_state = n->nud_state; + ether_addr_copy(ha, n->ha); @@ -143,8 +144,7 @@ tag to the driver. + struct flow_action_entry *entry; + struct net_device *dev; + int ifindex; - -- rt = (struct rtable *)flow->tuplehash[dir].tuple.dst_cache; ++ + this_tuple = &flow->tuplehash[dir].tuple; + switch (this_tuple->xmit_type) { + case FLOW_OFFLOAD_XMIT_DIRECT: @@ -158,7 +158,8 @@ tag to the driver. + default: + return; + } -+ + +- rt = (struct rtable *)flow->tuplehash[dir].tuple.dst_cache; + dev = dev_get_by_index(net, ifindex); + if (!dev) + return; diff --git a/target/linux/generic/pending-5.10/690-net-add-support-for-threaded-NAPI-polling.patch b/target/linux/generic/pending-5.10/690-net-add-support-for-threaded-NAPI-polling.patch index 79b7832f2a..2979934926 100644 --- a/target/linux/generic/pending-5.10/690-net-add-support-for-threaded-NAPI-polling.patch +++ b/target/linux/generic/pending-5.10/690-net-add-support-for-threaded-NAPI-polling.patch @@ -214,7 +214,7 @@ Signed-off-by: Felix Fietkau napi_hash_del(napi); list_del_rcu(&napi->dev_list); napi_free_frags(napi); -@@ -6788,52 +6881,18 @@ EXPORT_SYMBOL(__netif_napi_del); +@@ -6788,53 +6881,19 @@ EXPORT_SYMBOL(__netif_napi_del); static int napi_poll(struct napi_struct *n, struct list_head *repoll) { @@ -228,7 +228,8 @@ Signed-off-by: Felix Fietkau have = netpoll_poll_lock(n); - weight = n->weight; -- ++ work = __napi_poll(n, &do_repoll); + - /* This NAPI_STATE_SCHED test is for avoiding a race - * with netpoll's poll_napi(). Only the entity which - * obtains the lock and sees NAPI_STATE_SCHED set will @@ -246,8 +247,8 @@ Signed-off-by: Felix Fietkau - n->poll, work, weight); - - if (likely(work < weight)) -- goto out_unlock; -+ work = __napi_poll(n, &do_repoll); ++ if (!do_repoll) + goto out_unlock; - /* Drivers must not modify the NAPI state if they - * consume the entire weight. In such cases this code @@ -256,8 +257,7 @@ Signed-off-by: Felix Fietkau - */ - if (unlikely(napi_disable_pending(n))) { - napi_complete(n); -+ if (!do_repoll) - goto out_unlock; +- goto out_unlock; - } - - if (n->gro_bitmask) { @@ -268,9 +268,10 @@ Signed-off-by: Felix Fietkau - } - - gro_normal_list(n); - +- /* Some drivers may have called napi_schedule * prior to exhausting their budget. + */ @@ -11288,6 +11347,10 @@ static int __init net_dev_init(void) sd->backlog.weight = weight_p; } diff --git a/target/linux/generic/pending-5.10/770-15-net-ethernet-mtk_eth_soc-add-support-for-initializin.patch b/target/linux/generic/pending-5.10/770-15-net-ethernet-mtk_eth_soc-add-support-for-initializin.patch index fa4803211a..09282175b0 100644 --- a/target/linux/generic/pending-5.10/770-15-net-ethernet-mtk_eth_soc-add-support-for-initializin.patch +++ b/target/linux/generic/pending-5.10/770-15-net-ethernet-mtk_eth_soc-add-support-for-initializin.patch @@ -185,7 +185,7 @@ Signed-off-by: Felix Fietkau +{ + unsigned long timeout = jiffies + HZ; + -+ while (time_is_before_jiffies(timeout)) { ++ while (time_is_after_jiffies(timeout)) { + if (!(ppe_r32(ppe, MTK_PPE_GLO_CFG) & MTK_PPE_GLO_CFG_BUSY)) + return 0; + diff --git a/target/linux/generic/pending-5.10/834-ledtrig-libata.patch b/target/linux/generic/pending-5.10/834-ledtrig-libata.patch index 623e48085d..a52e712d8c 100644 --- a/target/linux/generic/pending-5.10/834-ledtrig-libata.patch +++ b/target/linux/generic/pending-5.10/834-ledtrig-libata.patch @@ -106,11 +106,11 @@ Signed-off-by: Daniel Golle + for (i = 0; i < host->n_ports; i++) { + if (unlikely(!host->ports[i]->ledtrig)) + continue; -+ + + snprintf(host->ports[i]->ledtrig_name, + sizeof(host->ports[i]->ledtrig_name), "ata%u", + host->ports[i]->print_id); - ++ + host->ports[i]->ledtrig->name = host->ports[i]->ledtrig_name; + + if (led_trigger_register(host->ports[i]->ledtrig)) {