diff --git a/package/boot/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-envtools/files/mediatek_filogic index b92a2c788c..61a52d64a9 100644 --- a/package/boot/uboot-envtools/files/mediatek_filogic +++ b/package/boot/uboot-envtools/files/mediatek_filogic @@ -34,6 +34,7 @@ ubootenv_add_ubi_default() { case "$board" in abt,asr3000|\ +cetron,ct3003-ubootmod|\ h3c,magic-nx30-pro|\ jcg,q30-pro|\ konka,komi-a31|\ @@ -75,7 +76,6 @@ jdcloud,re-cp-03) esac ;; cetron,ct3003|\ -cetron,ct3003-ubootmod|\ edgecore,eap111|\ h3c,magic-nx30-pro-nmbm|\ netgear,wax220|\ diff --git a/package/boot/uboot-mediatek/Makefile b/package/boot/uboot-mediatek/Makefile index 27f53cc28d..db001f2844 100644 --- a/package/boot/uboot-mediatek/Makefile +++ b/package/boot/uboot-mediatek/Makefile @@ -231,6 +231,18 @@ define U-Boot/mt7981_abt_asr3000 DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3 endef +define U-Boot/mt7981_cetron_ct3003 + NAME:=Cetron CT3003 + BUILD_SUBTARGET:=filogic + BUILD_DEVICES:=cetron_ct3003-ubootmod + UBOOT_CONFIG:=mt7981_cetron_ct3003 + UBOOT_IMAGE:=u-boot.fip + BL2_BOOTDEV:=spim-nand + BL2_SOC:=mt7981 + BL2_DDRTYPE:=ddr3 + DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3 +endef + define U-Boot/mt7981_cmcc_rax3000m-emmc NAME:=CMCC RAX3000M BUILD_SUBTARGET:=filogic @@ -771,6 +783,7 @@ UBOOT_TARGETS := \ mt7628_ravpower_rp-wd009 \ mt7629_rfb \ mt7981_abt_asr3000 \ + mt7981_cetron_ct3003 \ mt7981_cmcc_rax3000m-emmc \ mt7981_cmcc_rax3000m-nand \ mt7981_h3c_magic-nx30-pro \ diff --git a/package/boot/uboot-mediatek/patches/455-add-cetron_ct3003.patch b/package/boot/uboot-mediatek/patches/455-add-cetron_ct3003.patch new file mode 100644 index 0000000000..d9bbc2bf39 --- /dev/null +++ b/package/boot/uboot-mediatek/patches/455-add-cetron_ct3003.patch @@ -0,0 +1,327 @@ +--- /dev/null ++++ b/configs/mt7981_cetron_ct3003_defconfig +@@ -0,0 +1,107 @@ ++CONFIG_ARM=y ++CONFIG_SYS_HAS_NONCACHED_MEMORY=y ++CONFIG_POSITION_INDEPENDENT=y ++CONFIG_ARCH_MEDIATEK=y ++CONFIG_TEXT_BASE=0x41e00000 ++CONFIG_SYS_MALLOC_F_LEN=0x4000 ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_DEFAULT_DEVICE_TREE="mt7981-cetron-ct3003" ++CONFIG_OF_LIBFDT_OVERLAY=y ++CONFIG_TARGET_MT7981=y ++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00 ++CONFIG_DEBUG_UART_BASE=0x11002000 ++CONFIG_DEBUG_UART_CLOCK=40000000 ++CONFIG_SYS_LOAD_ADDR=0x46000000 ++CONFIG_DEBUG_UART=y ++CONFIG_FIT=y ++CONFIG_BOOTDELAY=30 ++CONFIG_AUTOBOOT_KEYED=y ++CONFIG_AUTOBOOT_MENU_SHOW=y ++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-cetron-ct3003.dtb" ++CONFIG_LOGLEVEL=7 ++CONFIG_PRE_CONSOLE_BUFFER=y ++CONFIG_LOG=y ++CONFIG_BOARD_LATE_INIT=y ++CONFIG_HUSH_PARSER=y ++CONFIG_SYS_PROMPT="MT7981> " ++CONFIG_CMD_CPU=y ++CONFIG_CMD_LICENSE=y ++CONFIG_CMD_BOOTMENU=y ++CONFIG_CMD_ASKENV=y ++CONFIG_CMD_ERASEENV=y ++CONFIG_CMD_ENV_FLAGS=y ++CONFIG_CMD_STRINGS=y ++CONFIG_CMD_DM=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_GPT=y ++CONFIG_CMD_MTD=y ++CONFIG_CMD_PART=y ++CONFIG_CMD_DHCP=y ++CONFIG_CMD_TFTPSRV=y ++CONFIG_CMD_RARP=y ++CONFIG_CMD_PING=y ++CONFIG_CMD_CDP=y ++CONFIG_CMD_SNTP=y ++CONFIG_CMD_DNS=y ++CONFIG_CMD_LINK_LOCAL=y ++CONFIG_CMD_PXE=y ++CONFIG_CMD_CACHE=y ++CONFIG_CMD_PSTORE=y ++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000 ++CONFIG_CMD_UUID=y ++CONFIG_CMD_HASH=y ++CONFIG_CMD_SMC=y ++CONFIG_CMD_UBI=y ++CONFIG_CMD_UBI_RENAME=y ++CONFIG_OF_EMBED=y ++CONFIG_ENV_OVERWRITE=y ++CONFIG_ENV_IS_IN_UBI=y ++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y ++CONFIG_ENV_UBI_PART="ubi" ++CONFIG_ENV_UBI_VOLUME="ubootenv" ++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2" ++CONFIG_SYS_RELOC_GD_ENV_ADDR=y ++CONFIG_USE_DEFAULT_ENV_FILE=y ++CONFIG_DEFAULT_ENV_FILE="cetron_ct3003_env" ++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y ++CONFIG_VERSION_VARIABLE=y ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_NETCONSOLE=y ++CONFIG_USE_IPADDR=y ++CONFIG_IPADDR="192.168.1.1" ++CONFIG_USE_SERVERIP=y ++CONFIG_SERVERIP="192.168.1.254" ++CONFIG_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_BUTTON=y ++CONFIG_BUTTON_GPIO=y ++CONFIG_CLK=y ++CONFIG_GPIO_HOG=y ++CONFIG_LED=y ++CONFIG_LED_BLINK=y ++CONFIG_LED_GPIO=y ++# CONFIG_MMC is not set ++CONFIG_MTD=y ++CONFIG_DM_MTD=y ++CONFIG_MTD_SPI_NAND=y ++CONFIG_MTD_UBI_FASTMAP=y ++CONFIG_PHY_FIXED=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PHY=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7981=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_REGULATOR_GPIO=y ++CONFIG_RAM=y ++CONFIG_DM_SERIAL=y ++CONFIG_MTK_SERIAL=y ++CONFIG_SPI=y ++CONFIG_DM_SPI=y ++CONFIG_MTK_SPIM=y ++CONFIG_ZSTD=y ++CONFIG_HEXDUMP=y ++CONFIG_LMB_MAX_REGIONS=64 +--- /dev/null ++++ b/arch/arm/dts/mt7981-cetron-ct3003.dts +@@ -0,0 +1,156 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later ++ ++/dts-v1/; ++#include "mt7981.dtsi" ++#include ++#include ++ ++/ { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ model = "Cetron CT3003"; ++ compatible = "mediatek,mt7981", "mediatek,mt7981-rfb"; ++ ++ chosen { ++ stdout-path = &uart0; ++ tick-timer = &timer0; ++ }; ++ ++ memory@40000000 { ++ device_type = "memory"; ++ reg = <0x40000000 0x10000000>; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ ++ button-reset { ++ label = "reset"; ++ linux,code = ; ++ gpios = <&gpio 1 GPIO_ACTIVE_LOW>; ++ }; ++ ++ button-wps { ++ label = "wps"; ++ linux,code = ; ++ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++ ++ gpio-leds { ++ compatible = "gpio-leds"; ++ ++ led_status_red: led-0 { ++ label = "red:status"; ++ gpios = <&gpio 3 GPIO_ACTIVE_LOW>; ++ default-state = "on"; ++ }; ++ ++ led_status_green: led-1 { ++ label = "green:status"; ++ gpios = <&gpio 7 GPIO_ACTIVE_LOW>; ++ default-state = "off"; ++ }; ++ }; ++}; ++ ++ð { ++ status = "okay"; ++ mediatek,gmac-id = <0>; ++ phy-mode = "2500base-x"; ++ mediatek,switch = "mt7531"; ++ reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>; ++ ++ fixed-link { ++ speed = <2500>; ++ full-duplex; ++ }; ++}; ++ ++&pinctrl { ++ spi_flash_pins: spi0-pins-func-1 { ++ mux { ++ function = "flash"; ++ groups = "spi0", "spi0_wp_hold"; ++ }; ++ ++ conf-pu { ++ pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; ++ drive-strength = ; ++ bias-pull-up = ; ++ }; ++ ++ conf-pd { ++ pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; ++ drive-strength = ; ++ bias-pull-down = ; ++ }; ++ }; ++}; ++ ++&spi0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi_flash_pins>; ++ status = "okay"; ++ must_tx; ++ enhance_timing; ++ dma_ext; ++ ipm_design; ++ support_quad; ++ tick_dly = <2>; ++ sample_sel = <0>; ++ ++ spi_nand@0 { ++ compatible = "spi-nand"; ++ reg = <0>; ++ spi-max-frequency = <52000000>; ++ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "bl2"; ++ reg = <0x0 0x100000>; ++ }; ++ ++ partition@100000 { ++ label = "u-boot-env"; ++ reg = <0x100000 0x80000>; ++ }; ++ ++ partition@180000 { ++ label = "art"; ++ reg = <0x180000 0x100000>; ++ }; ++ ++ partition@280000 { ++ label = "factory"; ++ reg = <0x280000 0x100000>; ++ }; ++ ++ partition@380000 { ++ label = "fip"; ++ reg = <0x380000 0x200000>; ++ }; ++ ++ partition@580000 { ++ label = "ubi"; ++ reg = <0x580000 0x7a80000>; ++ compatible = "linux,ubi"; ++ }; ++ }; ++ }; ++}; ++ ++&uart0 { ++ mediatek,force-highspeed; ++ status = "okay"; ++}; ++ ++&watchdog { ++ status = "disabled"; ++}; +--- /dev/null ++++ b/cetron_ct3003_env +@@ -0,0 +1,55 @@ ++ipaddr=192.168.1.1 ++serverip=192.168.1.254 ++loadaddr=0x46000000 ++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0 ++bootargs=root=/dev/fit0 rootwait ++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi ++bootconf=config-1 ++bootdelay=0 ++bootfile=immortalwrt-mediatek-filogic-cetron_ct3003-ubootmod-initramfs-recovery.itb ++bootfile_bl2=immortalwrt-mediatek-filogic-cetron_ct3003-ubootmod-preloader.bin ++bootfile_fip=immortalwrt-mediatek-filogic-cetron_ct3003-ubootmod-bl31-uboot.fip ++bootfile_upg=immortalwrt-mediatek-filogic-cetron_ct3003-ubootmod-squashfs-sysupgrade.itb ++bootled_pwr=red:status ++bootled_rec=red:status ++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 ++bootmenu_default=0 ++bootmenu_delay=0 ++bootmenu_title= ( ( ( OpenWrt ) ) ) ++bootmenu_0=Initialize environment.=run _firstboot ++bootmenu_0d=Run default boot command.=run boot_default ++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return ++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return ++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return ++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return ++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return ++bootmenu_8=Reboot.=reset ++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset ++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu ++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever ++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off ++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off ++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever ++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done ++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf ++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory ++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2 ++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800 ++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr ++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr ++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic || run ubi_format ++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset ++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi ++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs ++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery ++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data ++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize ++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize ++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv ++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first ++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title ++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver" diff --git a/target/linux/mediatek/dts/mt7981b-cetron-ct3003-ubootmod.dts b/target/linux/mediatek/dts/mt7981b-cetron-ct3003-ubootmod.dts index 0705c7732c..66520d3c75 100644 --- a/target/linux/mediatek/dts/mt7981b-cetron-ct3003-ubootmod.dts +++ b/target/linux/mediatek/dts/mt7981b-cetron-ct3003-ubootmod.dts @@ -4,14 +4,25 @@ #include "mt7981b-cetron-ct3003.dtsi" / { - model = "Cetron CT3003 (custom U-Boot layout)"; + model = "Cetron CT3003 (OpenWrt U-Boot layout)"; compatible = "cetron,ct3003-ubootmod", "mediatek,mt7981"; }; +&chosen { + bootargs = "root=/dev/fit0 rootwait"; + rootdisk = <&ubi_rootdisk>; +}; &partitions { partition@580000 { + compatible = "linux,ubi"; label = "ubi"; - reg = <0x580000 0x6e80000>; + reg = <0x580000 0x7a80000>; + + volumes { + ubi_rootdisk: ubi-volume-fit { + volname = "fit"; + }; + }; }; }; diff --git a/target/linux/mediatek/dts/mt7981b-cetron-ct3003.dts b/target/linux/mediatek/dts/mt7981b-cetron-ct3003.dts index d411d940bc..23b0721fbe 100644 --- a/target/linux/mediatek/dts/mt7981b-cetron-ct3003.dts +++ b/target/linux/mediatek/dts/mt7981b-cetron-ct3003.dts @@ -24,3 +24,16 @@ reg = <0x4580000 0x0400000>; }; }; + +&spi_nand { + spi-cal-enable; + spi-cal-mode = "read-data"; + spi-cal-datalen = <7>; + spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>; + spi-cal-addrlen = <5>; + spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>; + + mediatek,nmbm; + mediatek,bmt-max-ratio = <1>; + mediatek,bmt-max-reserved-blocks = <64>; +}; diff --git a/target/linux/mediatek/dts/mt7981b-cetron-ct3003.dtsi b/target/linux/mediatek/dts/mt7981b-cetron-ct3003.dtsi index 36658ad985..242dafafb4 100644 --- a/target/linux/mediatek/dts/mt7981b-cetron-ct3003.dtsi +++ b/target/linux/mediatek/dts/mt7981b-cetron-ct3003.dtsi @@ -17,7 +17,7 @@ led-upgrade = &led_status_green; }; - chosen { + chosen: chosen { stdout-path = "serial0:115200n8"; }; @@ -99,20 +99,10 @@ #size-cells = <1>; compatible = "spi-nand"; reg = <0>; + spi-max-frequency = <52000000>; - - spi-cal-enable; - spi-cal-mode = "read-data"; - spi-cal-datalen = <7>; - spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>; - spi-cal-addrlen = <5>; - spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>; - spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; - mediatek,nmbm; - mediatek,bmt-max-ratio = <1>; - mediatek,bmt-max-reserved-blocks = <64>; partitions: partitions { compatible = "fixed-partitions"; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/05_compat-version b/target/linux/mediatek/filogic/base-files/etc/board.d/05_compat-version index 9090b6ede0..2c0f0d0b35 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/05_compat-version +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/05_compat-version @@ -6,7 +6,8 @@ board_config_update case "$(board_name)" in bananapi,bpi-r3|\ - bananapi,bpi-r3-mini) + bananapi,bpi-r3-mini|\ + cetron,ct3003-ubootmod) ucidef_set_compat_version "1.2" ;; esac diff --git a/target/linux/mediatek/filogic/base-files/etc/uci-defaults/05_fix-compat-version b/target/linux/mediatek/filogic/base-files/etc/uci-defaults/05_fix-compat-version index 6dcf80010d..5a9149c2ca 100644 --- a/target/linux/mediatek/filogic/base-files/etc/uci-defaults/05_fix-compat-version +++ b/target/linux/mediatek/filogic/base-files/etc/uci-defaults/05_fix-compat-version @@ -2,7 +2,8 @@ case "$(board_name)" in bananapi,bpi-r3|\ - bananapi,bpi-r3-mini) + bananapi,bpi-r3-mini|\ + cetron,ct3003-ubootmod) uci set system.@system[0].compat_version="1.2" uci commit system ;; diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh index eef0f2c2e9..46d730da0f 100755 --- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh @@ -69,6 +69,7 @@ platform_do_upgrade() { bananapi,bpi-r3-mini|\ bananapi,bpi-r4|\ bananapi,bpi-r4-poe|\ + cetron,ct3003-ubootmod|\ cmcc,rax3000m|\ h3c,magic-nx30-pro|\ jcg,q30-pro|\ diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 3385587133..8c0a7017e3 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -442,22 +442,27 @@ TARGET_DEVICES += cetron_ct3003 define Device/cetron_ct3003-ubootmod DEVICE_VENDOR := Cetron DEVICE_MODEL := CT3003 - DEVICE_VARIANT := (custom U-Boot layout) + DEVICE_VARIANT := (OpenWrt U-Boot layout) DEVICE_DTS := mt7981b-cetron-ct3003-ubootmod DEVICE_DTS_DIR := ../dts DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware UBINIZE_OPTS := -E 5 BLOCKSIZE := 128k PAGESIZE := 2048 - IMAGE_SIZE := 113152k KERNEL_IN_UBI := 1 - IMAGES += factory.bin - IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE) - IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata - KERNEL = kernel-bin | lzma | \ - fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb - KERNEL_INITRAMFS = kernel-bin | lzma | \ - fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd + UBOOTENV_IN_UBI := 1 + IMAGES := sysupgrade.itb + KERNEL_INITRAMFS_SUFFIX := -recovery.itb + KERNEL := kernel-bin | gzip + KERNEL_INITRAMFS := kernel-bin | lzma | \ + fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k + IMAGE/sysupgrade.itb := append-kernel | \ + fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata + ARTIFACTS := preloader.bin bl31-uboot.fip + ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3 + ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot cetron_ct3003 + DEVICE_COMPAT_VERSION := 1.2 + DEVICE_COMPAT_MESSAGE := Flash layout changes require bootloader update endef TARGET_DEVICES += cetron_ct3003-ubootmod