mediatek: add Livinet ZR-3020 support
The UART is unlocked by default, boot the initramfs image with tftp then flash sysupgrade image (do not retain configurations). Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
This commit is contained in:
Tianling Shen
parent
606e547ac2
commit
d5a91a330a
@ -37,6 +37,9 @@ bananapi,bpi-r3)
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
livinet,zr-3020)
|
||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000" "1"
|
||||
;;
|
||||
xiaomi,redmi-router-ax6000|\
|
||||
xiaomi,redmi-router-ax6000-stock)
|
||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x20000"
|
||||
|
||||
321
target/linux/mediatek/dts/mt7981-livinet-zr-3020.dts
Normal file
321
target/linux/mediatek/dts/mt7981-livinet-zr-3020.dts
Normal file
@ -0,0 +1,321 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Copyright (C) 2023 Tianling Shen <cnsztl@immortalwrt.org>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "mt7981.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Livinet ZR-3020";
|
||||
compatible = "livinet,zr-3020", "mediatek,mt7981";
|
||||
|
||||
aliases {
|
||||
led-boot = &boot_led;
|
||||
led-failsafe = &boot_led;
|
||||
led-running = &running_led;
|
||||
led-upgrade = &upgrade_led;
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
button-reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
button-wps {
|
||||
label = "wps";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
label = "red:d8";
|
||||
gpios = <&pio 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-1 {
|
||||
label = "blue:internet";
|
||||
gpios = <&pio 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
running_led: led-2 {
|
||||
label = "blue:running";
|
||||
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
upgrade_led: led-3 {
|
||||
label = "green:upgrade";
|
||||
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
boot_led: led-4 {
|
||||
label = "red:boot";
|
||||
gpios = <&pio 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-6 {
|
||||
label = "blue:d7";
|
||||
gpios = <&pio 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-7 {
|
||||
label = "blue:wlan2g";
|
||||
gpios = <&pio 34 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-8 {
|
||||
label = "blue:wlan5g";
|
||||
gpios = <&pio 35 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
|
||||
gmac0: mac@0 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
nvmem-cells = <&macaddr_config_50707>;
|
||||
nvmem-cell-names = "mac-address-ascii";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio_bus {
|
||||
switch0: switch@0 {
|
||||
compatible = "mediatek,mt7531";
|
||||
reg = <31>;
|
||||
dsa,member = <0 0>;
|
||||
reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "wan";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@6 {
|
||||
reg = <6>;
|
||||
ethernet = <&gmac0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_flash_pins>;
|
||||
status = "okay";
|
||||
|
||||
spi_nand: flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spi-nand";
|
||||
reg = <0>;
|
||||
|
||||
spi-max-frequency = <52000000>;
|
||||
spi-tx-buswidth = <4>;
|
||||
spi-rx-buswidth = <4>;
|
||||
mediatek,nmbm;
|
||||
mediatek,bmt-max-ratio = <1>;
|
||||
mediatek,bmt-max-reserved-blocks = <64>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "BL2";
|
||||
reg = <0x00000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x100000 0x80000>;
|
||||
};
|
||||
|
||||
factory: partition@180000 {
|
||||
label = "Factory";
|
||||
reg = <0x180000 0x200000>;
|
||||
};
|
||||
|
||||
partition@380000 {
|
||||
label = "FIP";
|
||||
reg = <0x380000 0x200000>;
|
||||
};
|
||||
|
||||
partition@580000 {
|
||||
label = "ubi";
|
||||
reg = <0x580000 0x4000000>;
|
||||
};
|
||||
|
||||
partition@4580000 {
|
||||
label = "firmware_backup";
|
||||
reg = <0x4580000 0x2000000>;
|
||||
};
|
||||
|
||||
partition@6580000 {
|
||||
label = "zrsave";
|
||||
reg = <0x6580000 0x100000>;
|
||||
};
|
||||
|
||||
partition@6680000 {
|
||||
label = "config2";
|
||||
reg = <0x6680000 0x100000>;
|
||||
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_config_5068a: macaddr@5068a {
|
||||
reg = <0x5068a 0x11>;
|
||||
};
|
||||
|
||||
macaddr_config_50707: macaddr@50707 {
|
||||
reg = <0x50707 0x11>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pio {
|
||||
i2c_pins: i2c-pins-g0 {
|
||||
mux {
|
||||
function = "i2c";
|
||||
groups = "i2c0_0";
|
||||
};
|
||||
};
|
||||
|
||||
pcm_pins: pcm-pins-g0 {
|
||||
mux {
|
||||
function = "pcm";
|
||||
groups = "pcm";
|
||||
};
|
||||
};
|
||||
|
||||
pwm0_pin: pwm0-pin-g0 {
|
||||
mux {
|
||||
function = "pwm";
|
||||
groups = "pwm0_0";
|
||||
};
|
||||
};
|
||||
|
||||
pwm1_pin: pwm1-pin-g0 {
|
||||
mux {
|
||||
function = "pwm";
|
||||
groups = "pwm1_0";
|
||||
};
|
||||
};
|
||||
|
||||
pwm2_pin: pwm2-pin {
|
||||
mux {
|
||||
function = "pwm";
|
||||
groups = "pwm2";
|
||||
};
|
||||
};
|
||||
|
||||
spi0_flash_pins: spi0-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spi0", "spi0_wp_hold";
|
||||
};
|
||||
|
||||
conf-pu {
|
||||
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
|
||||
};
|
||||
|
||||
conf-pd {
|
||||
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
|
||||
};
|
||||
};
|
||||
|
||||
uart1_pins: uart1-pins-g1 {
|
||||
mux {
|
||||
function = "uart";
|
||||
groups = "uart1_1";
|
||||
};
|
||||
};
|
||||
|
||||
uart2_pins: uart2-pins-g1 {
|
||||
mux {
|
||||
function = "uart";
|
||||
groups = "uart2_1";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wifi {
|
||||
mediatek,mtd-eeprom = <&factory 0x0>;
|
||||
|
||||
nvmem-cells = <&macaddr_config_5068a>;
|
||||
nvmem-cell-names = "mac-address-ascii";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
@ -6,6 +6,11 @@ board=$(board_name)
|
||||
board_config_update
|
||||
|
||||
case $board in
|
||||
livinet,zr-3020)
|
||||
ucidef_set_led_netdev "internet" "INTERNET" "blue:internet" "wan"
|
||||
ucidef_set_led_netdev "wlan2g" "WLAN2G" "blue:wlan2g" "phy0-ap0"
|
||||
ucidef_set_led_netdev "wlan5g" "WLAN5G" "blue:wlan5g" "phy1-ap0"
|
||||
;;
|
||||
xiaomi,redmi-router-ax6000|\
|
||||
xiaomi,redmi-router-ax6000-stock|\
|
||||
xiaomi,redmi-router-ax6000-ubootmod)
|
||||
|
||||
@ -14,6 +14,9 @@ mediatek_setup_interfaces()
|
||||
bananapi,bpi-r3)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 sfp2" "eth1 wan"
|
||||
;;
|
||||
livinet,zr-3020)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" wan
|
||||
;;
|
||||
mediatek,mt7986a-rfb)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan6" "eth1 wan"
|
||||
;;
|
||||
@ -55,6 +58,9 @@ mediatek_setup_macs()
|
||||
bananapi,bpi-r3)
|
||||
wan_mac=$(macaddr_add $(cat /sys/class/net/eth0/address) 1)
|
||||
;;
|
||||
livinet,zr-3020)
|
||||
wan_mac=$(mtd_get_mac_ascii config2 wanmac)
|
||||
;;
|
||||
xiaomi,redmi-router-ax6000|\
|
||||
xiaomi,redmi-router-ax6000-stock|\
|
||||
xiaomi,redmi-router-ax6000-ubootmod)
|
||||
|
||||
@ -24,6 +24,10 @@ case "$board" in
|
||||
[ "$PHYNBR" = "0" ] && macaddr_unsetbit $addr 6 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_setbit $addr 6 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
livinet,zr-3020)
|
||||
addr=$(mtd_get_mac_ascii config2 wifi5gmac)
|
||||
[ "$PHYNBR" = "1" ] && echo $macaddr > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
tplink,tl-xdr4288|\
|
||||
tplink,tl-xdr6086|\
|
||||
tplink,tl-xdr6088)
|
||||
|
||||
@ -100,6 +100,27 @@ define Device/bananapi_bpi-r3
|
||||
endef
|
||||
TARGET_DEVICES += bananapi_bpi-r3
|
||||
|
||||
define Device/livinet_zr-3020
|
||||
DEVICE_VENDOR := Livinet
|
||||
DEVICE_MODEL := ZR-3020
|
||||
DEVICE_DTS := mt7981-livinet-zr-3020
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
|
||||
UBINIZE_OPTS := -E 5
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
IMAGE_SIZE := 52216k
|
||||
KERNEL_IN_UBI := 1
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
KERNEL = kernel-bin | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
||||
KERNEL_INITRAMFS = kernel-bin | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
|
||||
endef
|
||||
TARGET_DEVICES += livinet_zr-3020
|
||||
|
||||
define Device/mediatek_mt7986a-rfb-nand
|
||||
DEVICE_VENDOR := MediaTek
|
||||
DEVICE_MODEL := MT7986 rfba AP (NAND)
|
||||
|
||||
Loading…
Reference in New Issue
Block a user