diff --git a/package/boot/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-envtools/files/mediatek_filogic index 360b2502f9..266fdde93a 100644 --- a/package/boot/uboot-envtools/files/mediatek_filogic +++ b/package/boot/uboot-envtools/files/mediatek_filogic @@ -93,6 +93,11 @@ zyxel,ex5601-t0-ubootmod) imou,lc-hx3001-ubootmod) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x80000" "1" ;; +jdcloud,re-cp-03) + local envdev=$(find_mmc_part "ubootenv" "mmcblk0") + ubootenv_add_uci_config "$envdev" "0x0" "0x40000" "0x40000" "1" + ubootenv_add_uci_config "$envdev" "0x40000" "0x40000" "0x40000" "1" + ;; livinet,zr-3020|\ livinet,zr-3020-ubootmod|\ qihoo,360t7-ubootmod) diff --git a/package/boot/uboot-mediatek/patches/452-add-jdcloud_re-cp-03.patch b/package/boot/uboot-mediatek/patches/452-add-jdcloud_re-cp-03.patch index 9a9b7103d6..fca95a2c22 100644 --- a/package/boot/uboot-mediatek/patches/452-add-jdcloud_re-cp-03.patch +++ b/package/boot/uboot-mediatek/patches/452-add-jdcloud_re-cp-03.patch @@ -207,15 +207,15 @@ +}; + +&mmc0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc0_pins_default>; + bus-width = <8>; -+ max-frequency = <200000000>; + cap-mmc-highspeed; + cap-mmc-hw-reset; ++ max-frequency = <200000000>; ++ non-removable; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc0_pins_default>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; -+ non-removable; + status = "okay"; +}; + diff --git a/target/linux/mediatek/dts/mt7986a-jdcloud-re-cp-03.dts b/target/linux/mediatek/dts/mt7986a-jdcloud-re-cp-03.dts new file mode 100644 index 0000000000..f89e409b9b --- /dev/null +++ b/target/linux/mediatek/dts/mt7986a-jdcloud-re-cp-03.dts @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2023 Tianling Shen + */ + +/dts-v1/; +#include +#include +#include + +#include "mt7986a.dtsi" + +/ { + model = "JDCloud RE-CP-03"; + compatible = "jdcloud,re-cp-03", "mediatek,mt7986a"; + + aliases { + led-boot = &red_led; + led-failsafe = &red_led; + led-running = &green_led; + led-upgrade = &green_led; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0 0x40000000 0 0x40000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-joylink { + label = "joylink"; + linux,code = ; + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + }; + + button-reset { + label = "reset"; + linux,code = ; + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led-0 { + label = "blue:status"; + gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + }; + + red_led: led-1 { + label = "red:status"; + gpios = <&pio 11 GPIO_ACTIVE_HIGH>; + }; + + green_led: led-2 { + label = "green:status"; + gpios = <&pio 12 GPIO_ACTIVE_LOW>; + }; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&crypto { + status = "okay"; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "2500base-x"; + phy-handle = <&phy6>; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&mdio { + phy6: phy@6 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <6>; + + reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <50000>; + realtek,aldps-enable; + }; + + switch: switch@1f { + compatible = "mediatek,mt7531"; + reg = <31>; + reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <66 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&mmc0 { + bus-width = <8>; + cap-mmc-highspeed; + hs400-ds-delay = <0x14014>; + max-frequency = <200000000>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + no-sd; + no-sdio; + non-removable; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + status = "okay"; +}; + +&pio { + mmc0_pins_default: mmc0-pins-default { + mux { + function = "emmc"; + groups = "emmc_51"; + }; + conf-cmd-dat { + pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", + "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", + "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; + input-enable; + drive-strength = <4>; + mediatek,pull-up-adv = <1>; + }; + conf-clk { + pins = "EMMC_CK"; + drive-strength = <6>; + mediatek,pull-down-adv = <2>; + }; + conf-ds { + pins = "EMMC_DSL"; + mediatek,pull-down-adv = <2>; + }; + conf-rst { + pins = "EMMC_RSTB"; + drive-strength = <4>; + mediatek,pull-up-adv = <1>; + }; + }; + + mmc0_pins_uhs: mmc0-uhs-pins { + mux { + function = "emmc"; + groups = "emmc_51"; + }; + conf-cmd-dat { + pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", + "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", + "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; + input-enable; + drive-strength = <4>; + mediatek,pull-up-adv = <1>; + }; + conf-clk { + pins = "EMMC_CK"; + drive-strength = <6>; + mediatek,pull-down-adv = <2>; + }; + conf-ds { + pins = "EMMC_DSL"; + mediatek,pull-down-adv = <2>; + }; + conf-rst { + pins = "EMMC_RSTB"; + drive-strength = <4>; + mediatek,pull-up-adv = <1>; + }; + }; + + wf_2g_5g_pins: wf-2g-5g-pins { + mux { + function = "wifi"; + groups = "wf_2g", "wf_5g"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", + "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "lan4"; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&trng { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&wifi { + pinctrl-names = "default"; + pinctrl-0 = <&wf_2g_5g_pins>; + status = "okay"; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 1f9f2ded32..aa8d1b0083 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -24,6 +24,7 @@ mediatek_setup_interfaces() ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 game" eth1 ;; asus,tuf-ax4200|\ + jdcloud,re-cp-03|\ mediatek,mt7981-rfb|\ zbtlink,zbt-z8102ax|\ zyxel,ex5601-t0-stock|\ @@ -152,6 +153,11 @@ mediatek_setup_macs() [ -n "$lan_mac" ] || lan_mac=$(macaddr_add $(mtd_get_mac_binary Factory 0x4) -1) wan_mac=$(macaddr_add $lan_mac 2) ;; + jdcloud,re-cp-03) + wan_mac=$(mmc_get_mac_binary factory 0x2a) + lan_mac=$(mmc_get_mac_binary factory 0x24) + label_mac=$lan_mac + ;; mercusys,mr90x-v1) label_mac=$(get_mac_binary "/tmp/tp_data/default-mac" 0) lan_mac=$label_mac diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata index 105f28bc91..5b7d22f48f 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata @@ -58,7 +58,8 @@ case "$FIRMWARE" in CI_UBIPART="UBI_DEV" caldata_extract_ubi "Factory" 0x0 0x1000 ;; - glinet,gl-mt6000) + glinet,gl-mt6000|\ + jdcloud,re-cp-03) caldata_extract_mmc "factory" 0x0 0x1000 ;; esac diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index 5d2bf0fc37..a2b008d1de 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -63,7 +63,8 @@ case "$board" in esac [ "$PHYNBR" = "1" ] && echo "$addr" > /sys${DEVPATH}/macaddress ;; - cmcc,rax3000m-emmc-ubootmod) + cmcc,rax3000m-emmc-ubootmod|\ + jdcloud,re-cp-03) [ "$PHYNBR" = "1" ] && mmc_get_mac_binary factory 0xa > /sys${DEVPATH}/macaddress ;; cudy,wr3000-v1) diff --git a/target/linux/mediatek/filogic/base-files/lib/preinit/90_extract_caldata b/target/linux/mediatek/filogic/base-files/lib/preinit/90_extract_caldata new file mode 100644 index 0000000000..e2e79a0465 --- /dev/null +++ b/target/linux/mediatek/filogic/base-files/lib/preinit/90_extract_caldata @@ -0,0 +1,12 @@ +. /lib/functions/system.sh + +do_extract_caldata() { + case $(board_name) in + glinet,gl-mt6000|\ + jdcloud,re-cp-03) + FIRMWARE=mediatek/mt7986_eeprom_mt7976_dual.bin \ + sh /etc/hotplug.d/firmware/11-mt76-caldata + ;; + esac +} +boot_hook_add preinit_main do_extract_caldata diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh index e969492bb8..b7aa5dde69 100755 --- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh @@ -117,6 +117,10 @@ platform_do_upgrade() { CI_KERNPART="fit" nand_do_upgrade "$1" ;; + jdcloud,re-cp-03) + CI_KERNPART="production" + emmc_do_upgrade "$1" + ;; mercusys,mr90x-v1) CI_UBIPART="ubi0" nand_do_upgrade "$1" @@ -176,6 +180,7 @@ platform_copy_config() { cmcc,rax3000m-emmc-ubootmod|\ glinet,gl-mt2500|\ glinet,gl-mt6000|\ + jdcloud,re-cp-03|\ ubnt,unifi-6-plus) emmc_copy_config ;; diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 71752f40de..c67ac86a30 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -623,6 +623,32 @@ define Device/jcg_q30-ubootmod endef TARGET_DEVICES += jcg_q30-ubootmod +define Device/jdcloud_re-cp-03 + DEVICE_VENDOR := JDCloud + DEVICE_MODEL := RE-CP-03 + DEVICE_DTS := mt7986a-jdcloud-re-cp-03 + DEVICE_DTS_DIR := ../dts + DEVICE_DTC_FLAGS := --pad 4096 + DEVICE_DTS_LOADADDR := 0x43f00000 + DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware \ + e2fsprogs f2fsck mkf2fs + KERNEL_LOADADDR := 0x44000000 + KERNEL := kernel-bin | gzip + KERNEL_INITRAMFS := kernel-bin | lzma | \ + fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k + KERNEL_INITRAMFS_SUFFIX := -recovery.itb + IMAGES := sysupgrade.itb + IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m + IMAGE/sysupgrade.itb := append-kernel | \ + fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | \ + pad-rootfs | append-metadata + ARTIFACTS :=gpt.bin preloader.bin bl31-uboot.fip + ARTIFACT/gpt.bin := mt798x-gpt emmc + ARTIFACT/preloader.bin := mt7986-bl2 emmc-ddr4 + ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot jdcloud_re-cp-03 +endef +TARGET_DEVICES += jdcloud_re-cp-03 + define Device/livinet_zr-3020-common DEVICE_VENDOR := Livinet DEVICE_MODEL := ZR-3020