fish/immortalwrt
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
5,393 Commits 6 Branches 17 Tags 782 MiB
a94de80d10
Commit Graph

117 Commits

Author SHA1 Message Date
Adrian Schmutzler
124b599380 kernel: properly insert local mtd partition parsers 
Between 4.19 and 5.4, the kernel moved the partition parsers into
the parsers subdirectory. This led to some necessary rebasing of
our local patches for parsers, which partially has been performed
without caring about where the code was inserted.

This commit tries to adjust our local patches so that parsers are
inserted at the "proper" positions with respect to alphabetic sorting
(if possible). Thus, the commit is cosmetic.

While this might look useless now, it will make life easier when
adding other parsers in the future or for rebasing on kernel changes.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
 2020-05-26 11:53:45 +08:00
CN_SZTL
917cc30ade
Merge Mainline 2020-05-24 22:41:44 +08:00
CN_SZTL
5d5c70362b
kernel: bump 4.19 to 4.19.124 
Refreshed all patches.

Signed-off-by: CN_SZTL <cnsztl@project-openwrt.eu.org>
 2020-05-24 21:59:06 +08:00
CN_SZTL
0a2cb6b61b
kernel: bump 4.14 to 4.14.181 
Refreshed all patches.

Signed-off-by: CN_SZTL <cnsztl@project-openwrt.eu.org>
 2020-05-24 21:25:57 +08:00
CN_SZTL
f5e3bd13ef
Merge Mainline 2020-05-04 16:11:02 +08:00
CN_SZTL
95aa0a3995 kernel: bump 4.14 to 4.14.177 
Fixes:
 - CVE-2020-11669

Remove upstreamed:
 - 001-irqchip-versatile-fpga-Handle-chained-IRQs-properly.patch
 - 002-irqchip-versatile-fpga-Apply-clear-mask-earlier.patch
 - 003-ARM-dts-oxnas-Fix-clear-mask-property.patch

Refreshed all patches.

Signed-off-by: CN_SZTL <cnsztl@project-openwrt.eu.org>
 2020-05-03 19:32:54 +08:00
CN_SZTL
920cf867f4
Merge Mainline 2020-05-01 10:38:39 +08:00
AmadeusGhost
244a0f8574 Revert "kernel: bump 4.14 to 4.14.177" 
This reverts commit 89c18f5335.
 2020-04-29 17:25:11 +08:00
CN_SZTL
a89aeebf92
Merge Mainline 2020-04-25 11:43:44 +08:00
CN_SZTL
0d6d3fd5d8 kernel: bump 4.19 to 4.19.118 
Refreshed all patches.

Signed-off-by: CN_SZTL <cnsztl@project-openwrt.eu.org>
 2020-04-25 11:08:19 +08:00
CN_SZTL
89c18f5335 kernel: bump 4.14 to 4.14.177 
Fixes:
 - CVE-2020-11669

Remove upstreamd:
 - 001-irqchip-versatile-fpga-Handle-chained-IRQs-properly.patch
 - 002-irqchip-versatile-fpga-Apply-clear-mask-earlier.patch
 - 003-ARM-dts-oxnas-Fix-clear-mask-property.patch

Refresh all patches.

Signed-off-by: CN_SZTL <cnsztl@project-openwrt.eu.org>
 2020-04-25 10:18:50 +08:00
AmadeusGhost
b7650efddd ramips: sync upstream source code 2020-04-19 12:29:05 +08:00
CN_SZTL
7f9ab3cee4
Merge Upstream 2020-04-17 22:40:20 +08:00
CN_SZTL
1211ab828d
Merge Lean's source 2020-04-17 22:37:21 +08:00
AmadeusGhost
9448672845
kernel: bump to 4.9.219, 4.14.176, 4.19.115 (#4350) 
* kernel: bump 4.14 to 4.14.176

Refreshed all patches.

Remove upstreamed:
- 0001-net-thunderx-workaround-BGX-TX-Underflow-issue.patch
- 600-ipv6-addrconf-call-ipv6_mc_up-for-non-Ethernet-inter.patch
- 184-USB-serial-option-add-Wistron-Neweb-D19Q1.patch

Fixes:
- CVE-2020-8648 (potentially)
- CVE-2020-8647
- CVE-2020-8649

Compile-tested on: cns3xxx, octeontx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

* kernel: bump 4.19 to 4.19.115

Remove upstreamed:
- 600-ipv6-addrconf-call-ipv6_mc_up-for-non-Ethernet-inter.patch
- 184-USB-serial-option-add-Wistron-Neweb-D19Q1.patch

Fixes:
- CVE-2020-8647
- CVE-2020-8648 (potentially)
- CVE-2020-8649

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

* kernel: bump 4.9 to 4.9.219

Refreshed all patches.

Altered patches:
- 0026-NET-multi-phy-support.patch

Fixes:
- CVE-2020-8647
- CVE-2020-8648 (Potentially)
- CVE-2020-8649

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
 2020-04-17 11:50:34 +08:00
AmadeusGhost
cc689609d6
ipq806x: 4.19: correct dts for m520 (#4330) 
Signed-off-by: AmadeusGhost <42570690+AmadeusGhost@users.noreply.github.com>
 2020-04-16 11:28:05 +08:00
AmadeusGhost
ea16f633ac ipq806x: 5.4: add more gmac config for m520 
status: fail to startup
 2020-04-16 09:06:04 +08:00
AmadeusGhost
61bad53e93 ipq806x: 5.4: rewrite dts 2020-04-15 10:26:33 +08:00
AmadeusGhost
ce149a86b9 ipq806x/4.19: fix error dts for m520 
Signed-off-by: AmadeusGhost <42570690+AmadeusGhost@users.noreply.github.com>
 2020-04-15 09:35:18 +08:00
CN_SZTL
f5c9391d0a
ipq806x: add Kernel 5.4 (Testing) 2020-04-15 02:06:48 +08:00
CN_SZTL
6861ca0a6a
ipq806x: init kernel 5.4 support 2020-04-14 23:21:08 +08:00
CN_SZTL
b1f9dd475d
Merge Lean's source 2020-03-27 17:01:40 +08:00
AmadeusGhost
77b85a3e18
ipq806x: add i2c chips support for m520 (#4055) 
This commit enable lm75 and pcf8563 for m520.

Signed-off-by: AmadeusGhost <42570690+AmadeusGhost@users.noreply.github.com>
 2020-03-27 16:56:25 +08:00
AmadeusGhost
548d409854 ipq40xx/806x: add u9300 4G driver 
From @ksong008 dalao
 2020-03-23 23:32:19 +08:00
AmadeusGhost
b63e2effbd ipq806x: fix i2c support for m520 
dmesg:
  [   15.868426] lm75 0-0048: hwmon0: sensor 'lm75'
  [   15.922580] Bluetooth: RFCOMM TTY layer initialized
  [   15.922610] Bluetooth: RFCOMM socket layer initialized
  [   15.926267] Bluetooth: RFCOMM ver 1.11
  [   15.939812] rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as
  rtc0

Signed-off-by: AmadeusGhost <amadeus@jmu.edu.cn>
 2020-03-23 19:28:37 +08:00
CN_SZTL
f2fd3a4487
Merge Lean's source 2020-03-21 22:34:01 +08:00
AmadeusGhost
66de6c5050
luci-app-cpufreq: drop untest target (#3915) 
Someone reports that it has bug in arm64
 2020-03-21 22:17:09 +08:00
AmadeusGhost
7a69201b43 m520: disable gsbi2 serial 2020-03-14 11:29:38 +08:00
lean
3bef40a0cb kernel: bump to 4.14.172 / 4.19.108 2020-03-13 12:11:40 +08:00
AmadeusGhost
fb56108243 ipq806x: add i2c devices support for m520 
This commit enable lm75 and pcf8563 for m520.

Signed-off-by: AmadeusGhost <amadeus@jmu.edu.cn>
 2020-03-12 21:38:09 +08:00
Koen Vandeputte
aee0dfa544 kernel: bump 4.14 to 4.14.172 
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
 2020-03-10 11:16:01 +08:00
AmadeusGhost
1f313abd5a m520: fix spi naming 2020-03-06 22:18:10 +08:00
Ansuel Smith
e2a04cfbca ipq806x: fix bug in L2 cache scaling 
It has been notice a buf in L2 cache scaling where the scaling is not
done proprely if the frequency is set to the initial state before
the new frequency.

From: https://patchwork.kernel.org/patch/10565443/

* The clocks are set to aux clock rate first to make sure the
* secondary mux is not sourcing off of QSB. The rate is then set to
* two different rates to force a HFPLL reinit under all
* circumstances.

In the initial stage of boot to force a new frequency to apply, is
needed to first set the frequency back to the lowest one (aux_rate)
and then to the target one. This force and make sure the controller
actually switch the frequency to the right one. Apply the same
mechanism to L2 frequency scaling. Before scaling to the target
frequency, first set the frequency to the aux_rate to force the
transition, then scale it to the target frequency. Doing the wrong way
can produce unexpected results and could lock the scaling mechanism
until a full reboot is done (Causing a full reset by the krait-cc driver)

From: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=77612720a2362230af726baa4149c40ec7a7fb05

When the Hfplls are reprogrammed during the rate change,
the primary muxes which are sourced from the same hfpll
for higher frequencies, needs to be switched to the 'safe
secondary mux' as the parent for that small window. This
is done by registering a clk notifier for the muxes and
switching to the safe parent in the PRE_RATE_CHANGE notifier
and back to the original parent in the POST_RATE_CHANGE notifier.

This should apply also to L2 scaling... as we can't relly use
the notifier, we manually do this on L2 scaling.

Tested-By: Marc Benoit <marcb62185@gmail.com> [19.07: R7800]
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [nbg6817/ipq8065]
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
(cherry picked from commit 5ab9c0b388)
 2020-03-02 12:01:48 +08:00
Pavel Kubelun
3779539095 ipq806x: add missing core1 voltage tolerance 
Voltage tolerance is accounted per core, not per cpu, so add
missing DT entry.

Tested-By: Marc Benoit <marcb62185@gmail.com> [19.07: R7800]
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
(cherry picked from commit 77e7d6c20d)
 2020-03-02 12:01:19 +08:00
AmadeusGhost
691def3cad
kernel: bump to 4.9.214, 4.14.171, 4.19.106 (#3375) 2020-02-29 16:28:07 +08:00
AmadeusGhost
7dc881dd79 kernel: bump to 4.9.214, 4.14.171, 4.19.106 
Remove error commit from
15a0701cdd
 2020-02-29 01:23:18 +08:00
CN_SZTL
3ab67a8217
Revert "kernel: bump to 4.9.214, 4.14.171, 4.19.106 (#3318)" 
This reverts commit 4d68a12e34.
 2020-02-28 20:50:04 +08:00
CN_SZTL
4d68a12e34
kernel: bump to 4.9.214, 4.14.171, 4.19.106 (#3318) 
This reverts commit 191ace6dff.
 2020-02-27 17:39:41 +08:00
coolsnowwolf
191ace6dff Revert "kernel: bump to 4.9.214, 4.14.171, 4.19.106 (#3318)" 
This reverts commit 01ab5cf3c9.
 2020-02-26 16:47:18 +08:00
AmadeusGhost
01ab5cf3c9
kernel: bump to 4.9.214, 4.14.171, 4.19.106 (#3318) 
* kernel: bump 4.14 to 4.14.171

Refreshed all patches.

Fixes:
- CVE-2013-1798

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

* kernel: bump 4.19 to 4.19.105

Refreshed all patches.

Fixes:
- CVE-2013-1798
- CVE-2019-3016

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

* kernel: bump 4.19 to 4.19.106

Refreshed all patches.

Remove upstreamed:
- 950-0786-leds-pca963x-Fix-open-drain-initialization.patch

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

* kernel: bump to 4.9.214, 4.14.171, 4.19.106

Co-authored-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
 2020-02-25 12:24:44 +08:00
AmadeusGhost
464fb0c122
ipq806x: add support for ruijie_rg-mtfi-m520 (#3025) 
Signed-off-by: AmadeusGhost <42570690+AmadeusGhost@users.noreply.github.com>
 2020-02-11 17:26:50 +08:00
AmadeusGhost
6901278ef0
kernel: bump to 4.14.169, 4.19.101 (#2963) 
* kernel: bump to 4.14.169, 4.19.101

* uboot: update to latest

* mediatek: bump to v4.19

* ath79: switch to wpad

* Revert 'grub2: update to latest'
 2020-02-06 21:45:40 +08:00
coolsnowwolf
ecea39f109 Revert "files: sync from openwrt v19.07 (#2690)" 
This reverts commit 2289184a62.
 2020-02-03 12:33:25 +08:00
AmadeusGhost
2289184a62
files: sync from openwrt v19.07 (#2690) 2020-02-01 16:50:37 +08:00
AmadeusGhost
c7cfa84287
ipq806x: switch to ath10k-ct (#2854) 2020-01-30 01:40:13 +08:00
AmadeusGhost
7c7a6f2e55 kernel: bump to 4.9.208, 4.14.162, 4.19.93 (#2745) 
* generic: support mtd-mac-address-ascii

* kernel: bump to 4.9.208, 4.14.162, 4.19.93

* bcm2708: sync from openwrt v19.07

* firmware: update to latest version

* correct mistakes

* ipq40xx: fixed wrong patch
 2020-01-11 23:39:11 +08:00
LEAN-ESX
38f64e0960 ipq806x: revert to kernel 4.14 2019-12-28 17:53:52 -08:00
LEAN-ESX
70e66b06b1 kernel: bump to 4.9.207, 4.14.160, 4.19.91 2019-12-24 23:57:52 -08:00
LEAN-ESX
a70a719e81 kernel: bump to 4.9.206, 4.14.158, 4.19.88 2019-12-10 19:40:41 -08:00
LEAN-ESX
6e8290d715 kernel: bump to 4.9.205, 4.14.156, 4.19.86 2019-12-01 05:59:29 -08:00