Inline the preinst.arm-ce script. Support for including was added in
make 4.2 and is not working with older make versions.
Fixes: https://github.com/openwrt/openwrt/issues/11866
Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
(cherry picked from commit fcde517d35)
Safely detect integer overflow in try_addint() and try_subint().
Old code relied on undefined behavior, and recent versions of GCC on x86
optimized away the if-statements.
This caused integer overflow in Lua code instead of falling back to
floating-point numbers.
Signed-off-by: Adam Bailey <aebailey@gmail.com>
(cherry picked from commit 3a2e7c30d3)
openssl sets additional cflags in its configuration script. We need to
make it aware of our custom cflags to avoid adding conflicting cflags.
Fixes: #12866
Signed-off-by: Jitao Lu <dianlujitao@gmail.com>
(cherry picked from commit 51f57e7c2d)
A static-linked binary doesn't have a .dynamic section, but when
starting ujail with -r or -w will automatically search for PT_DYNAMIC in
ELF and exit with failure if it is not found.
Fixes: #970
Signed-off-by: Yuteng Zhong <zonyitoo@qq.com>
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Changes between 1.1.1t and 1.1.1u [30 May 2023]
*) Mitigate for the time it takes for `OBJ_obj2txt` to translate gigantic
OBJECT IDENTIFIER sub-identifiers to canonical numeric text form.
OBJ_obj2txt() would translate any size OBJECT IDENTIFIER to canonical
numeric text form. For gigantic sub-identifiers, this would take a very
long time, the time complexity being O(n^2) where n is the size of that
sub-identifier. (CVE-2023-2650)
To mitigitate this, `OBJ_obj2txt()` will only translate an OBJECT
IDENTIFIER to canonical numeric text form if the size of that OBJECT
IDENTIFIER is 586 bytes or less, and fail otherwise.
The basis for this restriction is RFC 2578 (STD 58), section 3.5. OBJECT
IDENTIFIER values, which stipulates that OBJECT IDENTIFIERS may have at
most 128 sub-identifiers, and that the maximum value that each sub-
identifier may have is 2^32-1 (4294967295 decimal).
For each byte of every sub-identifier, only the 7 lower bits are part of
the value, so the maximum amount of bytes that an OBJECT IDENTIFIER with
these restrictions may occupy is 32 * 128 / 7, which is approximately 586
bytes.
Ref: https://datatracker.ietf.org/doc/html/rfc2578#section-3.5
[Richard Levitte]
*) Reworked the Fix for the Timing Oracle in RSA Decryption (CVE-2022-4304).
The previous fix for this timing side channel turned out to cause
a severe 2-3x performance regression in the typical use case
compared to 1.1.1s. The new fix uses existing constant time
code paths, and restores the previous performance level while
fully eliminating all existing timing side channels.
The fix was developed by Bernd Edlinger with testing support
by Hubert Kario.
[Bernd Edlinger]
*) Corrected documentation of X509_VERIFY_PARAM_add0_policy() to mention
that it does not enable policy checking. Thanks to
David Benjamin for discovering this issue. (CVE-2023-0466)
[Tomas Mraz]
*) Fixed an issue where invalid certificate policies in leaf certificates are
silently ignored by OpenSSL and other certificate policy checks are skipped
for that certificate. A malicious CA could use this to deliberately assert
invalid certificate policies in order to circumvent policy checking on the
certificate altogether. (CVE-2023-0465)
[Matt Caswell]
*) Limited the number of nodes created in a policy tree to mitigate
against CVE-2023-0464. The default limit is set to 1000 nodes, which
should be sufficient for most installations. If required, the limit
can be adjusted by setting the OPENSSL_POLICY_TREE_NODES_MAX build
time define to a desired maximum number of nodes or zero to allow
unlimited growth. (CVE-2023-0464)
[Paul Dale]
Removed upstreamed patches.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
The index.json file lies next to Packages index files and contains a
json dict with the package architecture and a dict of package names and
versions.
This can be used for downstream project to know what packages in which
versions are available.
Signed-off-by: Paul Spooren <mail@aparcar.org>
(cherry picked from commit 218ce40cd7)
Apply two patches fixing low-severity vulnerabilities related to
certificate policies validation:
- Excessive Resource Usage Verifying X.509 Policy Constraints
(CVE-2023-0464)
Severity: Low
A security vulnerability has been identified in all supported versions
of OpenSSL related to the verification of X.509 certificate chains
that include policy constraints. Attackers may be able to exploit
this vulnerability by creating a malicious certificate chain that
triggers exponential use of computational resources, leading to a
denial-of-service (DoS) attack on affected systems.
Policy processing is disabled by default but can be enabled by passing
the `-policy' argument to the command line utilities or by calling the
`X509_VERIFY_PARAM_set1_policies()' function.
- Invalid certificate policies in leaf certificates are silently ignored
(CVE-2023-0465)
Severity: Low
Applications that use a non-default option when verifying certificates
may be vulnerable to an attack from a malicious CA to circumvent
certain checks.
Invalid certificate policies in leaf certificates are silently ignored
by OpenSSL and other certificate policy checks are skipped for that
certificate. A malicious CA could use this to deliberately assert
invalid certificate policies in order to circumvent policy checking on
the certificate altogether.
Policy processing is disabled by default but can be enabled by passing
the `-policy' argument to the command line utilities or by calling the
`X509_VERIFY_PARAM_set1_policies()' function.
Note: OpenSSL also released a fix for low-severity security advisory
CVE-2023-466. It is not included here because the fix only changes the
documentation, which is not built nor included in any OpenWrt package.
Due to the low-severity of these issues, there will be not be an
immediate new release of OpenSSL.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
The Mikrotik R11e-LTE6 modem is similar to ZTE MF286R modem, added
earlier: it has a Marvel chip, able to work in ACM+RNDIS mode, knows ZTE
specific commands, runs OpenWrt Barrier Breaker fork.
While the modem is able to offer IPv6 address, the RNDIS setup is unable
to complete if there is an IPv6 adress.
While it works in ACM+RNDIS mode, the user experience isn't as good as
with "proto 3g": the modem happily serves a local IP (192.168.1.xxx)
without internet access. Of course, if the modem has enough time
(for example at the second dialup), it will serve a public IP.
Modifing the DHCP Lease (to a short interval before connect and back to
default while finalizing) is a workaround to get a public IP at the
first try.
A safe workaround for this is to excercise an offline script of the
pingcheck program: simply restart (ifdown - ifup) the connection.
Another pitfall is that the modem writes a few messages at startup,
which confuses the manufacturer detection algorithm and got disabled.
daemon.notice netifd: Interface 'mikrotik' is setting up now
daemon.notice netifd: mikrotik (2366): Failed to parse message data
daemon.notice netifd: mikrotik (2366): WARNING: Variable 'ok' does not exist or is not an array/object
daemon.notice netifd: mikrotik (2366): Unsupported modem
daemon.notice netifd: mikrotik (2426): Stopping network mikrotik
daemon.notice netifd: mikrotik (2426): Failed to parse message data
daemon.notice netifd: mikrotik (2426): WARNING: Variable '*simdetec:1,sim' does not exist or is not an array/object
daemon.notice netifd: mikrotik (2426): Unsupported modem
daemon.notice netifd: Interface 'mikrotik' is now down
A workaround for this is to use the "delay" option in the interface
configuration.
I want to thank Forum members dchard (in topic Adding support for
MikroTik hAP ac3 LTE6 kit (D53GR_5HacD2HnD)) [1]
and mrhaav (in topic OpenWrt X86_64 + Mikrotik R11e-LTE6) [2]
for sharing their experiments and works.
Another information page was found at eko.one.pl [3].
[1]: https://forum.openwrt.org/t/137555
[2]: https://forum.openwrt.org/t/151743
[3]: https://eko.one.pl/?p=modem-r11elte
Signed-off-by: Szabolcs Hubai <szab.hu@gmail.com>
(cherry picked from commit dbd6ebd6d8)
