Commit Graph

56454 Commits

Author SHA1 Message Date
DENG Qingfang
9ebb85c372 ramips: mt7621: update PCIe node in dtsi
Update PCIe node in dtsi to match the new driver

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-04-04 14:14:43 +08:00
DENG Qingfang
d21d6ea454 ramips: mt7621: backport PCIe driver fixes from staging-test
Backport mt7621-pci/mt7621-pci-phy fixes from staging-test

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-04-04 14:14:43 +08:00
DENG Qingfang
66984646c2 ramips: mt7621: update pinctrl nodes
Upstream GPIO driver uses "groups" "function" properties

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-04-04 14:13:05 +08:00
DENG Qingfang
60f691dae4 ramips: mt7621: convert GPIO dts refs
The upstream driver does not use &gpio0..2 banks notation anymore,
so convert them to &gpio

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-04-04 14:13:05 +08:00
DENG Qingfang
783fc8e553 ramips: mt7621: replace gpio/eth nodes in mt7621.dtsi
There's different gpio and ethernet drivers upstream for mt7621.
Update these two nodes to match upstream dt bindings.

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-04-04 14:10:58 +08:00
DENG Qingfang
99d210d6a0 ramips: mt7621: refresh kernel config
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-04-04 12:04:14 +08:00
DENG Qingfang
6be0da90a1 ramips: refresh patches
Removed upstreamed/solved elsewhere upstream:
- 0001-MIPS-ralink-Add-rt3352-SPI_CS1-pinmux.patch
- 0002-MIPS-pci-rt2880-set-pci-controller-of_node.patch
- 0004-MIPS-ralink-add-MT7621-pcie-driver.patch
- 0009-PCI-MIPS-enable-PCIe-on-MT7688.patch
- 0025-pinctrl-ralink-add-pinctrl-driver.patch
- 0028-GPIO-ralink-add-mt7621-gpio-controller.patch
- 0043-spi-add-mt7621-support.patch
- 0045-i2c-add-mt7621-driver.patch
- 0047-DMA-ralink-add-rt2880-dma-engine.patch
- 0053-mtd-spi-nor-add-w25q256-3b-mode-switch.patch
- 0054-mtd-spi-nor-w25q256-respect-default-mode.patch
- 0099-pci-mt7620.patch
- 304-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch

Removed because of the new NAND driver:
- 0038-Revert-mtd-nand-Remove-unused-chip-write_page-hook.patch
- 0039-mtd-add-mt7621-nand-support.patch
- 0040-nand-hack.patch

Remove patch that no longer applies (needs rework):
- 0034-NET-multi-phy-support.patch

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-04-04 12:04:13 +08:00
DENG Qingfang
d75c9b8f81 ramips: mtk-mmc: set correct DMA mask
Since commit f8c55dc ("MIPS: use generic dma noncoherent ops for
simple noncoherent platforms") changed MIPS dma handling, the mmc
driver fails because it doesn't have a dma mask is set.

So set the correct dma mask.

Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-04-04 12:04:13 +08:00
DENG Qingfang
d4903b5720 ramips: move MTK MMC driver to files directory
Move MTK MMC driver from "files-4.14" to "files" so kernel 5.4
can use it

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-04-04 12:04:13 +08:00
DENG Qingfang
c70545f397 ramips: copy patches and kernel config to 5.4
Copy patches and kernel config to 5.4 for ramips

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-04-04 12:04:13 +08:00
CN_SZTL
0692f95ad7
luci-app-ssrserver-python: switch to python3 2020-04-04 06:21:37 +08:00
CN_SZTL
8eee41143f
Merge Official Source 2020-04-04 06:13:02 +08:00
CN_SZTL
c509e0e306
[mac80211] ath/subsys: allow vht on 2g 2020-04-04 00:33:58 +08:00
lean
b402438456
luci-app-ssr-plus: display log when enable socks5 server only 2020-04-04 00:31:55 +08:00
Rafał Miłecki
b51ea43f90 bcm53xx: refactor board.d code in 02_network
1. Use functions for cleaner code
2. Always execute WAN interface generic code

Before this change WAN interface code wasn't executed on all devices due
to an early "exit 0".

Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2020-04-03 17:59:56 +02:00
CN_SZTL
97be079408
Merge Offical Source 2020-04-03 22:24:44 +08:00
CN_SZTL
98797cac1a
qBittorrent-Enhanced-Edition: bump to 4.2.3.10 2020-04-03 22:11:22 +08:00
Tan Zien
3ec70052c5 kernel: add module for Mellanox mlx Network Driver
add module to support Mellanox Connect-X card
mlx4 supports ConnectX-3 series and previous cards
mlx5 supports Connect-IB/ConnectX-4 series and later cards

Signed-off-by: Tan Zien <nabsdh9@gmail.com>
2020-04-03 15:33:27 +02:00
Tim Harvey
ff6b092121 imx6: bootscript: use partition UUID for rootfs if possible
Specifying root filesystem by device is non-deterministic for several
reasons:
 - USB device unmeration order is not garunteeed for USB storage devs
 - MMC devs ordering is determined by the instance of the MMC host
   controller including non-storage SDIO devices which can throw off
   numbering depending on kernel versions.

It is recommended to use partition UUID

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2020-04-03 12:17:45 +02:00
Tim Harvey
4298339b23 octeontx: switch to kernel 5.4
5.4 is stable on Gateworks Newport GW610x/GW620x/GW630x/GW640x

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2020-04-03 12:17:45 +02:00
Paul Spooren
07449f692c build: refactor JSON info files to profiles.json
JSON info files contain machine readable information of built profiles
and resulting images. These files were added in commit 881ed09ee6
("build: create JSON files containing image info").

They are useful for firmware wizards and script checking for
reproducibility.

Currently all JSON files are stored next to the built images, resulting
in up to 168 individual files for the ath79/generic target.

This patch refactors the JSON creation to store individual per image
(not per profile) files in $(BUILD_DIR)/json_info_files and create an
single overview file called `profiles.json` in the target directory.

Storing per image files and not per profile solves the problem of
parallel file writes. If a profiles sysupgrade and factory image are
finished at the same time both processes would write to the same JSON
file, resulting in randomly broken outputs.

Some target like x86/64 do not use the image code yet, resulting in
missing JSON files. If no JSON info files were created, no
`profiles.json` files is created as it would be empty anyway.

As before, this creation is enabled by default only if `BUILDBOT` is set.

Tested via buildroot & ImageBuilder on ath79/generic, imx6 and x86/64.

Signed-off-by: Paul Spooren <mail@aparcar.org>
[json_info_files dir handling in Make, if case refactoring]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-04-03 12:17:45 +02:00
CN_SZTL
dc9d02a914
cups: fix package 2020-04-03 08:40:29 +08:00
AmadeusGhost
182d64a47d
build dependencies: add libavahi-compat-libdnssd-dev 2020-04-03 02:49:26 +08:00
CN_SZTL
6e2787f7cb
luci-app-mia: remove duplicate package 2020-04-03 02:06:52 +08:00
CN_SZTL
65e2cd53ff
chinadns-ng: bump to 1.0-beta.19 2020-04-03 02:06:03 +08:00
CN_SZTL
7c2177e76a
luci-app-rclone: sync with upstream source 2020-04-02 22:30:59 +08:00
CN_SZTL
72965a7104
mysql: remove outdated package 2020-04-02 21:46:13 +08:00
CN_SZTL
d5dd1a106d
Merge Official Source 2020-04-02 20:58:45 +08:00
Kevin Darbyshire-Bryant
fcd1401700 grub2: fix build when ASLR enabled
Disable ASLR and filter '-fno-plt' from CFLAGS: solves building when
ASLR enabled by basically disabling ASLR.

Solves errors similar to:
relocation R_X86_64_32S against `.rodata' can not be used when making a PIE object; recompile with -fPIE
or
module missing GLOBAL_OFFSET_TABLE

Suggested-by: 李国 <uxgood.org@gmail.com>
Acked-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-04-02 13:42:26 +01:00
ElonH
86592fed1c
i40evf: driver has been merged in iavf
drivers/net/ethernet/intel/iavf/iavf_main.c
56:MODULE_ALIAS("i40evf");
2020-04-02 15:29:17 +08:00
Kevin Darbyshire-Bryant
b74386acc6 kmod-sched-cake: switch to in-tree cake for 4.19+
Use in tree version of cake for kernels 4.19+ and backport features from
later kernel versions to 4.19.

Unfortunately PROVIDES dependency handling produces bogus circular
dependency warnings so whilst this package and kmod-sched-cake-oot
should be able to PROVIDE kmod-sched-cake this doesn't work.

Instead, remove the PROVIDES option and modify package sqm-scripts to
depend on the correct module independently.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-04-01 21:59:45 +01:00
Kevin Darbyshire-Bryant
475738c9af kmod-sched-cake: rename to kmod-sched-cake-oot
In preparation for dropping the out of tree cake module and using
in tree cake from upstream, rename the package to kmod-sched-cake-oot
(out of tree)

Initially add a PROVIDES kmod-sched-cake so that package dependencies
can be satisfied.

Ultimately this package will be removed when linux 4.14 is removed.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-04-01 21:59:45 +01:00
Jason A. Donenfeld
e32eaf5896 wireguard: bump to 1.0.20200401
Recent backports to 5.5 and 5.4 broke our compat layer. This release is
to keep things running with the latest upstream stable kernels.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2020-04-01 22:24:58 +02:00
Daniel Golle
a24a9bbc8c mac80211: rt2x00: prune more unnecessary exports
The calibration patches for MT7620 unnecessarily export symbols and
populate never accessed function pointers. Remove all that and make
functions static as the only place where each of those functions is
called is within rt2800lib.c.
Also make code more readable by fixing indentation, removing
unnecessary parantheses and simplifying some instructions using
shorthands here and there.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-04-01 19:47:59 +01:00
Kevin Darbyshire-Bryant
51edc4eb89 jansson: convert to cmake
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-04-01 16:36:04 +01:00
CN_SZTL
df2afb2129
Merge Official Source 2020-04-01 23:16:03 +08:00
CN_SZTL
a8b5957bc2
luci-app-diskman: bump to 0.2.7 2020-04-01 23:09:52 +08:00
CN_SZTL
d1569de03e
luci-app-clash: sync with upstream source 2020-04-01 23:09:21 +08:00
AmadeusGhost
4b59db8601 i40e: adjust dependency 2020-04-01 16:25:28 +08:00
Eneas U de Queiroz
af5ccfbac7 openssl: bump to 1.1.1f
There were two changes between 1.1.1e and 1.1.1f:
- a change in BN prime generation to avoid possible fingerprinting of
  newly generated RSA modules
- the patch reversing EOF detection we had already applied.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2020-04-01 08:12:20 +02:00
Daniel Golle
9f14216a2c oxnas: some improvements for Shuttle KD20
* install kmod-hwmon-drivetemp by default
 * wire up thermal zone
 * fix fan GPIO polarity
 * fix i2c-gpio GPIO_OPEN_DRAIN

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-03-31 21:41:23 +01:00
Daniel Golle
5e82e1ed2f oxnas: fix warning in SATA driver
drivers/ata/sata_oxnas.c: In function 'sata_oxnas_port_irq':
drivers/ata/sata_oxnas.c:2126:25: warning: left shift count >= width of type [-Wshift-count-overflow]
  if (ap->qc_active & (1 << ATA_TAG_INTERNAL)) {
                           ^~

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-03-31 21:30:57 +01:00
CN_SZTL
739a5c5f2c
treewide: adjust category 2020-04-01 04:23:46 +08:00
CN_SZTL
7056b18fbf
ndpi-netfilter: fix compatibility for kernel >=5.0
This fix ElonH/testAction#25
2020-04-01 03:45:15 +08:00
CN_SZTL
b44555953a
luci-app-vssr: sync with upstream source 2020-04-01 01:57:24 +08:00
CN_SZTL
648107997e
Mod 20.04 2020-04-01 00:04:03 +08:00
CN_SZTL
30070460cf
Pcap_DNSProxy: update repo link
This solve ElonH/testAction#22
2020-03-31 23:39:10 +08:00
Mattraks
703d6241e0
luci-app-cpufreq:Add translation (#4130) 2020-03-31 23:32:38 +08:00
CN_SZTL
d670d5bbb7
Merge Official Source 2020-03-31 22:37:38 +08:00
Petr Štetiar
5562c5add2 ipq40xx: fix DAP-2610 boot failure
Albert has reported, that his DAP-2610 wont boot with the latest
snapshot and Fredrik has found out, that the device gets stuck at
"Waiting for root device ..." due to missing 5.4 kernel config symbol
CONFIG_MTD_SPLIT_WRGG_FW which was probably lost during the kernel
version bump.

Ref: https://forum.openwrt.org/t/dap-2610-bricked-help-needed
Fixes: 272e0a702a ("ipq40xx: add v5.4 support")
Suggested-by: Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-31 16:20:47 +02:00