config global global
	option mtu		"1500"			# the maximum allowed packet size (in bytes) on the interface being shaped
	option network		"wan"			# the name of the network whose interface should have its outgoing traffic shaped
	#option interface	"eth1"			# the name of the network interface which should have its outgoing traffic shaped


config upload upload
	option total_bandwidth	"600"			# 600kbit/s
	option default_class	"uclass_2"		# default traffic class, must be a section of type upload_class


config download download
	option total_bandwidth	"4000"			# 4000kbit/s (500Kbyte/s)
	option default_class	"dclass_1"		# default traffic class, must be a section of type download_class






#upload classes	
config upload_class uclass_1
	option percent_bandwidth	"40"		# percent of total bandwidth to use

config upload_class uclass_2
	option percent_bandwidth	"20"		# percent of total bandwidth to use
	option max_bandwidth		"30"		# max bandwidth useage in absolute speed (kbit/s)

config upload_class uclass_3
	option percent_bandwidth	"30"		# percent of total bandwidth to use
	option min_bandwidth		"160"		# min bandwidth to allocate to this class

config upload_class uclass_4
	option percent_bandwidth	"10"		# percent of total bandwidth to use



#download classes
config download_class dclass_1
	option percent_bandwidth	"30"		# percent of total bandwidth to use
	option min_bandwidth		"80"		# min bandwidth to allocate to this class

config download_class dclass_2
	option percent_bandwidth	"60"		# percent of total bandwidth to use

config download_class dclass_3
	option percent_bandwidth	"10"		# percent of total bandwidth to use
	option min_bandwidth		"80"		# min bandwidth to allocate to this class


# classification rules
#
# POSSIBLE OPTIONS:
# class		name of bandwidth class to use if rule matches, this is required in each rule section
# test_order		an integer that specifies the order in which the rule should be checked for a match (lower numbers are checked first)
# proto		check that packet has this protocol (tcp, udp, both), if port is specified default is both
# source	check that packet has this source ip, can optionally have /[mask] after it (see -s option in iptables man page)
# destination	check that packet has this destination ip, can optionally have /[mask] after it (see -d option in iptables man page)
# dport		check that packet has this destination port
# sport		check that packet has this source port
# min_pkt_size	check that packet is at least this size (in bytes)
# max_pkt_size  check that packet is no larger than this size (in bytes)
# layer7	check whether packet matches layer7 specification
# ipp2p		check wither packet matches ipp2p specification (used to recognize p2p protocols)
#		"ipp2p" or "all" will match any of the specified p2p protocols, you can
#			also specifically match any protocol listed in the documentation here:
#			http://ipp2p.org/docu_en.html
#
# sytnax for upload rules and download rules is identical
config upload_rule 
	option class		"uclass_4"
	option test_order	"1"
	option destination	"195.56.146.238"

config upload_rule 
	option class		"uclass_3"
	option test_order	"2"
	option proto		"both"
	option dstport		"80-90"

config upload_rule 
	option class		"uclass_1"
	option test_order	"3"
	option dstport		"22"

config upload_rule
	option class		"uclass_3"
	option test_order	"44"
	option proto		"udp"
	option max_pkt_size	"250"
	
config upload_rule
	option class		"uclass_3"
	option test_order	"5"
	option proto		"udp"
	option max_pkt_size	"250"

config upload_rule
	option class		"uclass_4"
	option test_order	"6"
	option ipp2p		"all"

config upload_rule
	option class		"uclass_3"
	option test_order	"7"
	option layer7		"pop3"

#download rules
config download_rule
	option class		"dclass_2"
	option test_order	"1"
	option dstport		"80-90"

config download_rule
	option class		"dclass_3"
	option test_order	"2"
	option ipp2p		"all"