An opensource OpenWrt variant for mainland China users.

Go to file

David Bauer 005a5405e0 ipq40xx: fix FRITZRepeater 1200 RGMII delay When the AVM FRITZ!Repeater 1200 was introduced on Kernel 4.19, the at803x PHY driver incorrectly set up the delays, not disabling delays set by the bootloader. The PHY was always operating with RX as well as TX delays enabled, but with kernel 5.4 and later, the required TX delay is disabled, breaking ethernet operation. Correct the PHY mode, so the driver enables both delays. Signed-off-by: David Bauer <mail@david-bauer.net>		2021-07-18 12:10:11 +08:00
config	Merge Mainline	2021-06-26 16:49:16 +08:00
include	kernel: bump 5.10 to 5.10.50	2021-07-18 12:09:10 +08:00
LICENSES	LICENSE: sync with upstream	2021-02-16 14:19:09 +08:00
package	ap6256-firmware: renamed from armbian-firmware	2021-07-17 18:09:15 +08:00
scripts	Merge Mainline	2021-07-14 14:53:12 +08:00
target	ipq40xx: fix FRITZRepeater 1200 RGMII delay	2021-07-18 12:10:11 +08:00
toolchain	Merge Mainline	2021-07-14 14:53:12 +08:00
tools	ath79: add support for TP-Link RE455 v1	2021-07-12 12:05:08 +08:00
.gitattributes	fix permisson	2019-08-16 15:09:42 +08:00
.gitignore	.gitignore: ignore any .vscode* file	2021-07-03 17:25:40 +08:00
BSDmakefile	build: use SPDX license tags	2021-02-06 12:07:10 +08:00
Config.in	build: use SPDX license tags	2021-02-06 12:07:10 +08:00
CONTRIBUTED.md	Merge Mainline	2021-07-14 14:53:12 +08:00
COPYING	LICENSE: sync with upstream	2021-02-16 14:19:09 +08:00
feeds.conf.default	Merge Mainline	2021-06-15 23:45:52 +08:00
Makefile	Revert "build: replace which with Bash command built-in"	2021-03-04 12:10:58 +08:00
README.md	Merge Mainline	2021-07-14 14:53:12 +08:00
rules.mk	build: add ninja build tool and make it available for cmake	2021-06-13 11:59:14 +08:00

README.md

PROJECT IMMORTALWRT

The Core Source Code of ImmortalWrt

Welcome to our Telegram Group: @ctcgfw_openwrt_discuss.

How to make it

Minimum requirements

Linux with case sensitive
2G DDR2 RAM
2 CPU Cores (AMD64, 1.4Ghz)
25G disk space left
Has access to both ChinaNet & Internet

Install the necessary packages (for Ubuntu user)

sudo apt-get update -y
sudo apt-get full-upgrade -y
sudo apt-get install -y build-essential cmake asciidoc binutils bzip2 gawk gettext git libncurses5-dev libz-dev patch unzip zlib1g-dev lib32gcc1 libc6-dev-i386 subversion flex uglifyjs git-core gcc-multilib g++-multilib p7zip p7zip-full msmtp libssl-dev texinfo libreadline-dev libglib2.0-dev xmlto qemu-utils upx libelf-dev autoconf automake libtool autopoint ccache curl wget vim nano python2.7 python3 python3-pip python3-ply haveged lrzsz device-tree-compiler scons antlr3 gperf intltool mkisofs rsync

For mainland China & Ubuntu(16.04+) user, you may run the following command to setup quickly:

sudo bash -c "bash <(curl -s https://build-scripts.project-openwrt.eu.org/init_build_environment.sh)"

Clone the source

git clone -b openwrt-18.06-k5.4 --single-branch https://github.com/immortalwrt/immortalwrt && cd immortalwrt
./scripts/feeds update -a && ./scripts/feeds install -a

Configure your firmware

make menuconfig

Make it

make -j$(nproc) V=s

Tips

You'd better not use root to make it, or you may be not able to use.
Default login address: 192.168.1.1, username is root and password is password.