An opensource OpenWrt variant for mainland China users.

Go to file

Sander Vanheule 006e09cb49 ath79: prepare for 1-port TP-Link EAP2x5 devices TP-Link has developed a number of access points based on the AP152 reference board. In the EAP-series of 802.11ac access points, this includes the following devices with one ethernet port: * EAP225 v1/v2 * EAP225 v3 * EAP225-Outdoor v1 * EAP245 v1 Since the only differences between these devices are the ath10k wireless radios and LEDs, a common base is provided for the overlapping support requirements. Hardware commonalities: * SoC: QCA9563-AL3A MIPS 74kc v5.0 @ 775MHz, AHB @ 258MHz * RAM: 128MiB DDR2 @ 650MHz * Flash: 16MiB SPI NOR * Wi-Fi 2.4GHz: provided by SoC * Wi-Fi 5Ghz: ath10k chip on PCIe * Ethernet: AR8033-AL1A, one 1GbE port (802.3at PoE) Signed-off-by: Sander Vanheule <sander@svanheule.net>		2020-11-24 23:27:20 +08:00
config	Merge Mainline	2020-11-15 00:49:56 +08:00
include	kernel: bump to 4.9.244, 4.14.207, 4.19.158	2020-11-21 21:15:35 +08:00
package	mvebu: add initial support for Globalscale ESPRESSObin-Ultra	2020-11-24 23:26:45 +08:00
scripts	Merge Mainline	2020-11-21 18:58:08 +08:00
target	ath79: prepare for 1-port TP-Link EAP2x5 devices	2020-11-24 23:27:20 +08:00
toolchain	musl: handle wcsnrtombs destination buffer overflow (CVE-2020-28928)	2020-11-21 18:02:17 +08:00
tools	Merge Mainline	2020-11-21 18:58:08 +08:00
.gitattributes	fix permisson	2019-08-16 15:09:42 +08:00
.gitignore	gitignore: ignore patches in root directory	2020-02-25 15:39:25 +08:00
BSDmakefile	packages: apply usign padding workarounds to package indexes if needed	2019-08-16 14:48:02 +08:00
Config.in	packages: apply usign padding workarounds to package indexes if needed	2019-08-16 14:48:02 +08:00
CONTRIBUTED.md	Merge Mainline	2020-08-28 01:59:52 +08:00
feeds.conf.default	feeds: switch to github official repo	2020-06-20 12:06:05 +08:00
LICENSE	packages: apply usign padding workarounds to package indexes if needed	2019-08-16 14:48:02 +08:00
Makefile	Makefile: sync with official source	2020-07-30 23:49:33 +08:00
README.md	README: rename branch to openwrt-18.06-k5.4	2020-08-08 13:53:33 +08:00
rules.mk	rules.mk: simplify FAKEROOT command line	2020-10-31 10:26:52 +08:00

README.md

PROJECT OPENWRT

The Source Code of OpenWrt-Lean Modified by CTCGFW

Welcome to our Telegram Group: @ctcgfw_openwrt_discuss.

How to make it

Minimum requirements

Linux with case sensitive
2G DDR2 RAM
2 CPU Cores (AMD64, 1.4Ghz)
25G disk space left
Has access to both ChinaNet & Internet

Install the necessary packages (for Ubuntu user)

sudo apt-get update -y
sudo apt-get full-upgrade -y
sudo apt-get install -y build-essential asciidoc binutils bzip2 gawk gettext git libncurses5-dev libz-dev patch unzip zlib1g-dev lib32gcc1 libc6-dev-i386 subversion flex uglifyjs git-core gcc-multilib g++-multilib p7zip p7zip-full msmtp libssl-dev texinfo libreadline-dev libglib2.0-dev xmlto qemu-utils upx libelf-dev autoconf automake libtool autopoint ccache curl wget vim nano python python3 python-pip python3-pip python-ply python3-ply haveged lrzsz device-tree-compiler scons antlr3 gperf intltool rsync

For mainland China & Ubuntu(16.04+) user, you may run the following command to setup quickly:

sudo bash -c "bash <(curl -s https://build-scripts.project-openwrt.eu.org/init_build_environment.sh)"

Clone the source

git clone -b openwrt-18.06-k5.4 --single-branch https://github.com/project-openwrt/openwrt && cd openwrt
./scripts/feeds update -a && ./scripts/feeds install -a

Configure your firmware

make menuconfig

Make it

make -j1 V=s

Tips

You'd better not use root to make it, or you may be not able to use.
Default login address: 192.168.1.1, username is root and password is password.