fish/immortalwrt
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
0104eed1e5
immortalwrt/target/linux
History
Adrian Schmutzler 0104eed1e5 ath79: add support for TP-Link CPE510 v1 
TP-Link CPE510-v1 is an outdoor wireless CPE for 5 GHz with
two Ethernet ports based on Atheros AR9334

Specifications:
 - 560/450/225 MHz (CPU/DDR/AHB)
 - 2x 10/100 Mbps Ethernet, 1x PoE-in, 1x PoE-out
 - 64 MB of DDR2 RAM
 - 8 MB of SPI-NOR Flash
 - 2T2R 5 GHz
 - 13 dBi built-in antenna
 - Power, LAN0, LAN1 green LEDs
 - 4x green RSSI LEDs

Flash factory image through stock firmware WEB UI
or through TFTP:
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP address:192.168.0.254

Based on the work of Paul Wassi <p.wassi@gmx.at>

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-08-07 18:04:03 +02:00
..
apm821xx kernel: bump 4.19 to 4.19.64 2019-08-06 11:52:47 +02:00
ar7 kernel: bump 4.9 to 4.9.186 2019-07-31 16:51:46 +02:00
ar71xx tplink-safeloader: increase kernel partition for CPE/WBSx10v1 2019-08-07 18:04:03 +02:00
arc770 treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
archs38 treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
armvirt armvirt: fix overlay support by updating to f2fs/ext4 based overlays 2019-06-25 14:12:22 +00:00
at91 at91: split up DEVICE_TITLE 2019-08-02 22:45:33 +02:00
ath25 ath25: split up DEVICE_TITLE 2019-07-10 16:56:16 +02:00
ath79 ath79: add support for TP-Link CPE510 v1 2019-08-07 18:04:03 +02:00
bcm53xx bcm53xx: split up DEVICE_TITLE 2019-08-02 22:45:02 +02:00
brcm47xx kernel: bump 4.19 to 4.19.62 2019-07-31 16:51:46 +02:00
brcm63xx brcm63xx: DVA-G3810BN/TL: Fix the WAN ethernet port 2019-06-06 12:05:51 +02:00
brcm2708 kernel: bump 4.19 to 4.19.64 2019-08-06 11:52:47 +02:00
cns3xxx treewide: sysupgrade: don't use $ARGV in platform_do_upgrade() 2019-07-17 08:05:38 +02:00
gemini gemini: split up DEVICE_TITLE 2019-08-02 22:45:02 +02:00
generic kernel: drop Fon(Foxconn) parser matching for the "firmware" partition 2019-08-06 14:27:10 +02:00
imx6 imx6: bump SDMA firmware to 3.5 2019-07-31 16:51:46 +02:00
ipq40xx kernel: bump 4.14 to 4.14.136 2019-08-06 11:52:47 +02:00
ipq806x ipq806x: split up DEVICE_TITLE 2019-08-02 22:45:02 +02:00
ixp4xx kernel: bump 4.9 to 4.9.187 2019-08-06 11:52:47 +02:00
kirkwood treewide: sysupgrade: don't use $ARGV in platform_do_upgrade() 2019-07-17 08:05:38 +02:00
lantiq kernel: bump 4.19 to 4.19.62 2019-07-31 16:51:46 +02:00
layerscape kernel: bump 4.14 to 4.14.136 2019-08-06 11:52:47 +02:00
malta malta: fix overlay support by updating to f2fs/ext4 based overlays 2019-06-25 14:12:22 +00:00
mediatek kernel: bump 4.19 to 4.19.64 2019-08-06 11:52:47 +02:00
mpc85xx mpc85xx: correct OCEDO Panda LED definition 2019-08-05 22:37:46 +02:00
mvebu kernel: bump 4.14 to 4.14.136 2019-08-06 11:52:47 +02:00
mxs mxs: disable unused serial drivers 2019-03-11 19:35:43 +01:00
octeon octeon: split up DEVICE_TITLE 2019-08-02 22:45:02 +02:00
octeontx kernel: Remove CONFIG_COMPAT 2019-05-11 17:15:41 +02:00
omap kernel: Deactivate CONFIG_BINFMT_MISC 2019-05-11 17:15:41 +02:00
orion orion: sysupgrade: change platform_check_image() args validation 2019-07-16 13:58:26 +02:00
oxnas oxnas: convert DEVICE_TITLE to new variables 2019-07-10 16:56:16 +02:00
pistachio treewide: sysupgrade: get rid of platform_nand_pre_upgrade() 2019-07-22 14:27:37 +02:00
ramips ramips: add support for Fon FON2601 2019-07-26 08:09:16 +02:00
rb532 treewide: sysupgrade: get rid of platform_nand_pre_upgrade() 2019-07-22 14:27:37 +02:00
samsung kernel: Do not set CONFIG_DEVMEM or CONFIG_DEVKMEM 2019-05-11 17:15:41 +02:00
sunxi sunxi: convert to multi-variable device title 2019-07-10 17:01:13 +02:00
tegra tegra: split up DEVICE_TITLE 2019-07-15 19:28:55 +02:00
uml kernel: Deactivate CONFIG_BINFMT_MISC 2019-05-11 17:15:41 +02:00
x86 x86: add modern network modules to Generic target 2019-07-17 12:16:29 +02:00
zynq zynq: convert to multi-variable device title 2019-07-08 16:28:47 +02:00
Makefile