Filip Moc 4f36e09b79 ramips: add support for TP-Link MR6400 v4 ... You can flash via tftp recovery: - serve tftp-recovery image as /tp_recovery.bin on 192.168.0.225/24 - connect to any ethernet port - power on the device while holding the reset button - wait at least 8 seconds before releasing reset button Flashing via OEM web interface does not work. LTE module does not support DHCP so it must be configured via QMI. Hardware Specification (v4.0 EU): - SoC: MT7628NN - Flash: Winbond W25Q64JVS (8MiB) - RAM: ESMT M14D5121632A (64MiB) - Wireless: SoC platform only (2.4GHz b/g/n, 2x internal antenna) - Ethernet: 1NIC (4x100M) - WWAN: TP-LINK LTE MODULE (2x external detachable antenna) - Power: DC 9V 0.85A Signed-off-by: Filip Moc <lede@moc6.cz>		2020-11-24 23:20:03 +08:00
..
base-files	ramips: add support for TP-Link MR6400 v4	2020-11-24 23:20:03 +08:00
profiles	ramips: mt7621: add support for Netgear R6800	2019-12-13 08:25:54 -08:00
config-5.4	kernel: unify CONFIG_GPIO_SYSFS in kernel configs	2020-08-07 18:08:33 +08:00
target.mk	ramips: switch rt305x subtarget to kernel 5.4	2020-08-07 18:03:27 +08:00