INAGAKI Hiroshi f305ce5c35 ramips: add support for I-O DATA WN-AC1167GR ... I-O DATA WN-AC1167GR is a 2.4/5 GHz band 11ac router, based on MediaTek MT7620A. Specification: - SoC : MediaTek MT7620A - RAM : DDR2 64 MB - Flash : SPI-NOR 8MB - WLAN : 2.4/5 GHz, 2T2R - 2.4 GHz: MT7620A (SoC) - 5 GHz : MT7612E - Ethernet: 10/100/1000 Mbps (ext. MT7530) - LED/key : 4x/3x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J2: TX, GND, RX, Vcc from SoC side - 115200n8 Flash instruction using factory image: 1. Boot WN-AC1167GR normaly 2. Access to "http://192.168.0.1/" and open firmware update page ("ファームウェア") 3. Select the OpenWrt factory image and click update ("更新") button to perform firmware update 4. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>		2019-02-14 16:56:14 +01:00
..
lzma-loader	ramips: Add support for mt7621 to lzma-loader	2018-06-21 06:54:42 +02:00
Makefile	build: move seama commands to image-commands.mk	2018-12-30 20:08:13 +01:00
mt76x8.mk	ramips: add support for Archer C50 v4	2019-01-26 21:46:32 +01:00
mt7620.mk	ramips: add support for I-O DATA WN-AC1167GR	2019-02-14 16:56:14 +01:00
mt7621.mk	ramips: add kmod-mt76x2 to WeVo 11AC NAS	2019-02-05 19:37:30 +01:00
rt288x.mk	ramips: use patch-dtb for F5D8235 V1	2018-04-23 22:07:22 +02:00
rt305x.mk	ramips: consolidate seama image build code	2018-12-30 20:08:12 +01:00
rt3883.mk	ramips: consolidate seama image build code	2018-12-30 20:08:12 +01:00