fish/immortalwrt
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
0cb851cad1
immortalwrt/target/linux/ath79
History
Nick Hainke 0cb851cad1 ath79: TP-Link EAP225-Outdoor v1: use pre-calibration nvmem-cell 
Fixes errors in the form of:
  ath10k_pci 0000:00:00.0: failed to fetch board data for bus=pci,
  vendor=168c,device=0056,subsystem-vendor=0000,subsystem-device
  =0000 from ath10k/QCA9888/hw2.0/board-2.bin
  ath10k_pci 0000:00:00.0: failed to fetch board-2.bin or board.bin
  from ath10k/QCA9888/hw2.0
  ath10k_pci 0000:00:00.0: failed to fetch board file: -12
  ath10k_pci 0000:00:00.0: could not probe fw (-12)

As described already in 2d3321619b ("ath79: TP-Link EAP245 v3: use
pre-calibration nvmem-cell"):
  Ath10k Wave-2 hardware requires an nvmem-cell called "pre-calibration"
  to load the device specific caldata, not "calibration".

Further rename the nvmem cell node and label to match the updated cell name.

Fixes: 23b9040745 ("ath79: TP-Link EAP225-Outdoor v1: convert ath10k to nvmem-cells")
Suggested-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-06-18 19:30:44 +02:00
..
base-files/etc/hotplug.d/ieee80211 ath79: migrate Archer C5 5GHz radio device paths 2022-03-31 18:07:29 +02:00
dts ath79: TP-Link EAP225-Outdoor v1: use pre-calibration nvmem-cell 2022-06-18 19:30:44 +02:00
files ath79: ag71xx-mdio: remove phy-mask property 2022-06-15 20:07:26 +02:00
generic ath79: D-Link DAP-3662 A1: convert ath10k caldata to nvmem 2022-06-18 11:57:21 +02:00
image ath79: move ubnt-xm to tiny 2022-06-11 21:22:58 +02:00
mikrotik ath79: add support for MikroTik hAP (RB951Ui-2nD) 2022-05-21 13:54:08 +02:00
nand ath79: ZTE MF286[A,R]: add "Power button blocker" GPIO switch 2022-05-15 16:32:40 +02:00
patches-5.10 kernel: bump 5.10 to 5.10.119 2022-06-06 19:20:02 +02:00
patches-5.15 kernel: bump 5.15 to 5.15.41 2022-06-06 19:20:28 +02:00
tiny ath79: move ubnt-xm to tiny 2022-06-11 21:22:58 +02:00
config-5.10 ath79: add support for reset key on MikroTik RB912UAG-2HPnD 2022-01-19 16:40:12 +01:00
config-5.15 kernel: move some symbols to generic config 2022-04-09 19:31:46 +02:00
Makefile ath79: switch to Kernel 5.10 2021-12-21 21:38:52 +01:00
modules.mk