immortalwrt/target/linux
Hauke Mehrtens 0fc789b724 realtek: Add ZyXEL GS1900-8
The ZyXEL GS1900-8 is a 8 port switch without any PoE functionality or
SFP ports, but otherwise similar to the other GS1900 switches.

Specifications
--------------
* Device:    ZyXEL GS1900-8 v1.2
* SoC:       Realtek RTL8380M 500 MHz MIPS 4KEc
* Flash:     Macronix MX25L12835F 16 MiB
* RAM:       Nanya NT5TU128M8GE-AC 128 MiB DDR2 SDRAM
* Ethernet:  8x 10/100/1000 Mbit
* LEDs:      1 PWR LED (green, not configurable)
             1 SYS LED (green, configurable)
             8 ethernet port status LEDs (green, SoC controlled)
* Buttons:   1 on-off glide switch at the back (not configurable)
             1 reset button at the right side, behind the air-vent
               (not configurable)
             1 reset button on front panel (configurable)
* Power      12V 1A barrel connector
* UART:      1 serial header (JP2) with populated standard pin connector on
             the left side of the PCB, towards the back. Pins are labelled:
             + VCC (3.3V)
             + TX (really RX)
             + RX (really TX)
             + GND
             the labelling is done from the usb2serial connector's point of
             view, so RX/ TX are mixed up.

Serial connection parameters for both devices: 115200 8N1.

Installation
------------
Instructions are identical to those for the GS1900-10HP and GS1900-8HP.

* Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10).
* Set up a TFTP server on your client and make it serve the initramfs
  image.
* Connect serial, power up the switch, interrupt U-boot by hitting the
  space bar, and enable the network:
  > rtk network on
* Since the GS1900-10HP is a dual-partition device, you want to keep the
  OEM firmware on the backup partition for the time being. OpenWrt can
  only boot off the first partition anyway (hardcoded in the DTS). To
  make sure we are manipulating the first partition, issue the following
  commands:
  > setsys bootpartition 0
  > savesys
* Download the image onto the device and boot from it:
  > tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-generic-zyxel_gs1900-8-initramfs-kernel.bin
  > bootm
* Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it:
  > sysupgrade /tmp/openwrt-realtek-generic-zyxel_gs1900-8-squashfs-sysupgrade.bin

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit e6ba970b6e)
2021-04-18 12:06:18 +02:00
..
apm821xx kernel: bump 5.4 to 5.4.108 2021-03-27 16:26:56 +01:00
arc770 target: use SPDX license identifiers on scripts 2021-02-10 15:47:23 +01:00
archs38 archs38: Add CONFIG_HZ=100 2021-03-19 18:01:55 +01:00
armvirt kernel: move some disabled symbols to generic 2021-04-11 16:54:22 +02:00
at91 at91: use SPDX license identifiers on DTS files 2021-02-10 15:47:23 +01:00
ath25 target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00
ath79 ath79: fix 10 Mbit PLL data for UniFi AC 2021-04-18 12:05:00 +02:00
bcm27xx kernel: move some disabled symbols to generic 2021-04-11 16:54:22 +02:00
bcm47xx bcm47xx: make WGT634U NVRAM patch apply again 2021-03-17 23:38:46 +01:00
bcm53xx bcm53xx: add pending TRX patch for "firmware" partition 2021-04-16 16:19:12 +02:00
bcm63xx bcm63xx: AD1018-nor: add NAND flash 2021-03-08 12:46:46 +01:00
bcm4908 kernel: bump 5.4 to 5.4.111 2021-04-11 17:35:12 +02:00
gemini gemini,layerscape,oxnas: don't disable option CONFIG_BPF_SYSCALL 2021-04-16 11:42:42 +01:00
generic kernel: bump 5.4 to 5.4.111 2021-04-11 17:35:12 +02:00
imx6 kernel: move some disabled symbols to generic 2021-04-11 16:54:22 +02:00
ipq40xx kernel: move some disabled symbols to generic 2021-04-11 16:54:22 +02:00
ipq806x kernel: bump 5.4 to 5.4.111 2021-04-11 17:35:12 +02:00
kirkwood kernel: backport 5.13 mtd partitioning changes 2021-04-08 11:25:41 +02:00
lantiq kernel: 5.4: import wireguard backport 2021-04-10 14:21:32 +02:00
layerscape gemini,layerscape,oxnas: don't disable option CONFIG_BPF_SYSCALL 2021-04-16 11:42:42 +01:00
malta target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00
mediatek kernel: bump 5.4 to 5.4.111 2021-04-11 17:35:12 +02:00
mpc85xx mpc85xx: p2020: fix cfi-nor detection 2021-03-01 21:49:55 +01:00
mvebu mvebu: armada 370: dts: fix the crypto engine 2021-04-18 12:04:33 +02:00
mxs target: use SPDX license identifiers on scripts 2021-02-10 15:47:23 +01:00
octeon kernel: move some disabled symbols to generic 2021-04-11 16:54:22 +02:00
octeontx kernel: move some disabled symbols to generic 2021-04-11 16:54:22 +02:00
omap kernel: move some disabled symbols to generic 2021-04-11 16:54:22 +02:00
oxnas gemini,layerscape,oxnas: don't disable option CONFIG_BPF_SYSCALL 2021-04-16 11:42:42 +01:00
pistachio kernel: add pending mtd patches adding NVMEM support 2021-03-17 21:24:22 +01:00
ramips ramips: mt7530 swconfig: fix race condition in register access 2021-04-18 12:05:04 +02:00
realtek realtek: Add ZyXEL GS1900-8 2021-04-18 12:06:18 +02:00
rockchip kernel: bump 5.4 to 5.4.111 2021-04-11 17:35:12 +02:00
sunxi sunxi: disable LPAE on cortexa8 2021-04-11 00:00:49 +02:00
tegra kernel: move some disabled symbols to generic 2021-04-11 16:54:22 +02:00
uml target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00
x86 kernel: move some disabled symbols to generic 2021-04-11 16:54:22 +02:00
zynq kernel: move some disabled symbols to generic 2021-04-11 16:54:22 +02:00
Makefile target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00