Adrian Schmutzler 12ee46b2f2 ramips: set WAN address in DTS for ASUS RT-AC51U/RT-AC54U ... The location 0x28 in factory partition is the common one used for ethernet address on this architecture. Despite, it contains the label MAC address for the devices at hand. Consequently, this patch moves 0x28 to the &ethernet node in DTS files (setting the WAN MAC address there) and sets up the lan_mac from 0x22 in 02_network. As a benefit, this allows to use label-mac-device in DTS instead of ucidef_set_label_macaddr. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>		2020-05-20 12:00:13 +08:00
..
base-files/etc	ramips: add kernel 5.4 support	2020-04-16 22:15:27 +08:00
dts	ramips: set WAN address in DTS for ASUS RT-AC51U/RT-AC54U	2020-05-20 12:00:13 +08:00
files/drivers	ramips: add basic support for kernel 5.4	2020-04-16 10:00:29 +08:00
image	mt7621: Make ER-X-SFP factory image compatible with EP-R6	2020-05-19 12:01:00 +08:00
mt76x8	mt7621/76x8: switch to kernel 5.4	2020-04-25 08:35:17 +08:00
mt7620	ramips: set WAN address in DTS for ASUS RT-AC51U/RT-AC54U	2020-05-20 12:00:13 +08:00
mt7621	ramips/mt7621: mikrotik: don't use mtd-mac-address in DTS	2020-05-09 11:49:43 +08:00
patches-4.14	Merge Mainline	2020-05-04 16:11:02 +08:00
patches-5.4	kernel: bump 5.4 to 5.4.37	2020-05-02 16:28:55 +08:00
rt288x	Revert "ramips: explicitly disable built-in switch for lan-only devices"	2020-04-29 08:10:21 +08:00
rt305x	ramips: explicitly disable built-in switch for lan-only devices	2020-04-28 10:44:06 +08:00
rt3883	Revert "ramips: explicitly disable built-in switch for lan-only devices"	2020-04-29 08:10:21 +08:00
Makefile	ramips: add kernel 5.4 support	2020-04-16 22:15:27 +08:00
modules.mk	ramips: add kernel 5.4 support	2020-04-16 22:15:27 +08:00