remittor 1f45d22005 ipq806x: Add support for Xiaomi Mi Router HD ... Xiaomi R3D is a 2.4/5 GHz band 11ac router, based on IPQ8064. Specification: * SoC: Qualcomm IPQ8064 * RAM: 512MB DDR3 * Flash: 256MB NAND (Macronix MX30UF2G18AC-TI) * Ethernet: 4x 10/100/1000 Mbps (1x WAN, 3x LAN) * WiFi: Qualcomm QCA9984 (5GHz, 4T4R, n/ac) * WiFi: Qualcomm QCA9980 (2.4GHz, 4T4R, b/g/n) * USB: 1x 3.0 * SATA: 1x SATA 3.1 (only for internal HDD 3.5") * BTN: Power, Reset * LEDS: Status(Green/Blue/Red) * UART: present as 4-pads on the PCB (3.3V, 115200-8-N-1) MAC addresses as verified by stock firmware: | Interface | MAC | ART | Format | |-------------+-------------------+---------+--------| | WAN (label) | xx:xx:xx:xx:xx:B2 | 0x0 | binary | | LAN | xx:xx:xx:xx:xx:B3 | 0x6 | binary | | WiFi 2g | xx:xx:xx:xx:xx:B4 | 0x1006 | binary | | WiFi 5g | xx:xx:xx:xx:xx:B5 | 0x5006 | binary | (cherry picked from commit a8b6057da7465a7ae9982dd5eafe6e7f5cb56970)		2023-04-13 19:00:37 +08:00
..
base-files	Merge Official Source	2023-04-12 03:14:42 +08:00
boot	ipq806x: Add support for Xiaomi Mi Router HD	2023-04-13 19:00:37 +08:00
devel	treewide: replace PKG_USE_MIPS16:=0 with PKG_BUILD_FLAGS:=no-mips16	2023-03-21 18:28:22 +01:00
emortal	autocore: merge arm/x86 variant	2023-04-10 18:44:11 +08:00
firmware	Merge Official Source	2023-04-12 23:58:15 +08:00
kernel	Merge Official Source	2023-04-12 23:58:15 +08:00
libs	mbedtls: refresh patches	2023-04-12 22:47:19 +08:00
network	Merge Official Source	2023-04-06 18:48:00 +08:00
system	fstools: enable any device with non-MTD rootfs_data volume	2023-04-13 18:28:02 +08:00
utils	Merge Official Source	2023-04-02 01:42:32 +08:00
Makefile	build: fix opkg install step for large package selection	2021-05-12 11:13:53 +02:00